diff options
53 files changed, 1474 insertions, 6935 deletions
diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX index 433cf5e..5f7f7d7 100644 --- a/Documentation/00-INDEX +++ b/Documentation/00-INDEX @@ -24,6 +24,8 @@ DMA-mapping.txt - info for PCI drivers using DMA portably across all platforms. DocBook/ - directory with DocBook templates etc. for kernel documentation. +HOWTO + - The process and procedures of how to do Linux kernel development. IO-mapping.txt - how to access I/O mapped memory from within device drivers. IPMI.txt @@ -256,6 +258,10 @@ specialix.txt - info on hardware/driver for specialix IO8+ multiport serial card. spinlocks.txt - info on using spinlocks to provide exclusive access in kernel. +stable_api_nonsense.txt + - info on why the kernel does not have a stable in-kernel api or abi. +stable_kernel_rules.txt + - rules and procedures for the -stable kernel releases. stallion.txt - info on using the Stallion multiport serial driver. svga.txt diff --git a/Documentation/HOWTO b/Documentation/HOWTO new file mode 100644 index 0000000..6c9e746 --- /dev/null +++ b/Documentation/HOWTO @@ -0,0 +1,618 @@ +HOWTO do Linux kernel development +--------------------------------- + +This is the be-all, end-all document on this topic. It contains +instructions on how to become a Linux kernel developer and how to learn +to work with the Linux kernel development community. It tries to not +contain anything related to the technical aspects of kernel programming, +but will help point you in the right direction for that. + +If anything in this document becomes out of date, please send in patches +to the maintainer of this file, who is listed at the bottom of the +document. + + +Introduction +------------ + +So, you want to learn how to become a Linux kernel developer? Or you +have been told by your manager, "Go write a Linux driver for this +device." This document's goal is to teach you everything you need to +know to achieve this by describing the process you need to go through, +and hints on how to work with the community. It will also try to +explain some of the reasons why the community works like it does. + +The kernel is written mostly in C, with some architecture-dependent +parts written in assembly. A good understanding of C is required for +kernel development. Assembly (any architecture) is not required unless +you plan to do low-level development for that architecture. Though they +are not a good substitute for a solid C education and/or years of +experience, the following books are good for, if anything, reference: + - "The C Programming Language" by Kernighan and Ritchie [Prentice Hall] + - "Practical C Programming" by Steve Oualline [O'Reilly] + +The kernel is written using GNU C and the GNU toolchain. While it +adheres to the ISO C89 standard, it uses a number of extensions that are +not featured in the standard. The kernel is a freestanding C +environment, with no reliance on the standard C library, so some +portions of the C standard are not supported. Arbitrary long long +divisions and floating point are not allowed. It can sometimes be +difficult to understand the assumptions the kernel has on the toolchain +and the extensions that it uses, and unfortunately there is no +definitive reference for them. Please check the gcc info pages (`info +gcc`) for some information on them. + +Please remember that you are trying to learn how to work with the +existing development community. It is a diverse group of people, with +high standards for coding, style and procedure. These standards have +been created over time based on what they have found to work best for +such a large and geographically dispersed team. Try to learn as much as +possible about these standards ahead of time, as they are well +documented; do not expect people to adapt to you or your company's way +of doing things. + + +Legal Issues +------------ + +The Linux kernel source code is released under the GPL. Please see the +file, COPYING, in the main directory of the source tree, for details on +the license. If you have further questions about the license, please +contact a lawyer, and do not ask on the Linux kernel mailing list. The +people on the mailing lists are not lawyers, and you should not rely on +their statements on legal matters. + +For common questions and answers about the GPL, please see: + http://www.gnu.org/licenses/gpl-faq.html + + +Documentation +------------ + +The Linux kernel source tree has a large range of documents that are +invaluable for learning how to interact with the kernel community. When +new features are added to the kernel, it is recommended that new +documentation files are also added which explain how to use the feature. +When a kernel change causes the interface that the kernel exposes to +userspace to change, it is recommended that you send the information or +a patch to the manual pages explaining the change to the manual pages +maintainer at mtk-manpages@gmx.net. + +Here is a list of files that are in the kernel source tree that are +required reading: + README + This file gives a short background on the Linux kernel and describes + what is necessary to do to configure and build the kernel. People + who are new to the kernel should start here. + + Documentation/Changes + This file gives a list of the minimum levels of various software + packages that are necessary to build and run the kernel + successfully. + + Documentation/CodingStyle + This describes the Linux kernel coding style, and some of the + rationale behind it. All new code is expected to follow the + guidelines in this document. Most maintainers will only accept + patches if these rules are followed, and many people will only + review code if it is in the proper style. + + Documentation/SubmittingPatches + Documentation/SubmittingDrivers + These files describe in explicit detail how to successfully create + and send a patch, including (but not limited to): + - Email contents + - Email format + - Who to send it to + Following these rules will not guarantee success (as all patches are + subject to scrutiny for content and style), but not following them + will almost always prevent it. + + Other excellent descriptions of how to create patches properly are: + "The Perfect Patch" + http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt + "Linux kernel patch submission format" + http://linux.yyz.us/patch-format.html + + Documentation/stable_api_nonsense.txt + This file describes the rationale behind the conscious decision to + not have a stable API within the kernel, including things like: + - Subsystem shim-layers (for compatibility?) + - Driver portability between Operating Systems. + - Mitigating rapid change within the kernel source tree (or + preventing rapid change) + This document is crucial for understanding the Linux development + philosophy and is very important for people moving to Linux from + development on other Operating Systems. + + Documentation/SecurityBugs + If you feel you have found a security problem in the Linux kernel, + please follow the steps in this document to help notify the kernel + developers, and help solve the issue. + + Documentation/ManagementStyle + This document describes how Linux kernel maintainers operate and the + shared ethos behind their methodologies. This is important reading + for anyone new to kernel development (or anyone simply curious about + it), as it resolves a lot of common misconceptions and confusion + about the unique behavior of kernel maintainers. + + Documentation/stable_kernel_rules.txt + This file describes the rules on how the stable kernel releases + happen, and what to do if you want to get a change into one of these + releases. + + Documentation/kernel-docs.txt + A list of external documentation that pertains to kernel + development. Please consult this list if you do not find what you + are looking for within the in-kernel documentation. + + Documentation/applying-patches.txt + A good introduction describing exactly what a patch is and how to + apply it to the different development branches of the kernel. + +The kernel also has a large number of documents that can be +automatically generated from the source code itself. This includes a +full description of the in-kernel API, and rules on how to handle +locking properly. The documents will be created in the +Documentation/DocBook/ directory and can be generated as PDF, +Postscript, HTML, and man pages by running: + make pdfdocs + make psdocs + make htmldocs + make mandocs +respectively from the main kernel source directory. + + +Becoming A Kernel Developer +--------------------------- + +If you do not know anything about Linux kernel development, you should +look at the Linux KernelNewbies project: + http://kernelnewbies.org +It consists of a helpful mailing list where you can ask almost any type +of basic kernel development question (make sure to search the archives +first, before asking something that has already been answered in the +past.) It also has an IRC channel that you can use to ask questions in +real-time, and a lot of helpful documentation that is useful for +learning about Linux kernel development. + +The website has basic information about code organization, subsystems, +and current projects (both in-tree and out-of-tree). It also describes +some basic logistical information, like how to compile a kernel and +apply a patch. + +If you do not know where you want to start, but you want to look for +some task to start doing to join into the kernel development community, +go to the Linux Kernel Janitor's project: + http://janitor.kernelnewbies.org/ +It is a great place to start. It describes a list of relatively simple +problems that need to be cleaned up and fixed within the Linux kernel +source tree. Working with the developers in charge of this project, you +will learn the basics of getting your patch into the Linux kernel tree, +and possibly be pointed in the direction of what to go work on next, if +you do not already have an idea. + +If you already have a chunk of code that you want to put into the kernel +tree, but need some help getting it in the proper form, the +kernel-mentors project was created to help you out with this. It is a +mailing list, and can be found at: + http://selenic.com/mailman/listinfo/kernel-mentors + +Before making any actual modifications to the Linux kernel code, it is +imperative to understand how the code in question works. For this +purpose, nothing is better than reading through it directly (most tricky +bits are commented well), perhaps even with the help of specialized +tools. One such tool that is particularly recommended is the Linux +Cross-Reference project, which is able to present source code in a +self-referential, indexed webpage format. An excellent up-to-date +repository of the kernel code may be found at: + http://sosdg.org/~coywolf/lxr/ + + +The development process +----------------------- + +Linux kernel development process currently consists of a few different +main kernel "branches" and lots of different subsystem-specific kernel +branches. These different branches are: + - main 2.6.x kernel tree + - 2.6.x.y -stable kernel tree + - 2.6.x -git kernel patches + - 2.6.x -mm kernel patches + - subsystem specific kernel trees and patches + +2.6.x kernel tree +----------------- +2.6.x kernels are maintained by Linus Torvalds, and can be found on +kernel.org in the pub/linux/kernel/v2.6/ directory. Its development +process is as follows: + - As soon as a new kernel is released a two weeks window is open, + during this period of time maintainers can submit big diffs to + Linus, usually the patches that have already been included in the + -mm kernel for a few weeks. The preferred way to submit big changes + is using git (the kernel's source management tool, more information + can be found at http://git.or.cz/) but plain patches are also just + fine. + - After two weeks a -rc1 kernel is released it is now possible to push + only patches that do not include new features that could affect the + stability of the whole kernel. Please note that a whole new driver + (or filesystem) might be accepted after -rc1 because there is no + risk of causing regressions with such a change as long as the change + is self-contained and does not affect areas outside of the code that + is being added. git can be used to send patches to Linus after -rc1 + is released, but the patches need to also be sent to a public + mailing list for review. + - A new -rc is released whenever Linus deems the current git tree to + be in a reasonably sane state adequate for testing. The goal is to + release a new -rc kernel every week. + - Process continues until the kernel is considered "ready", the + process should last around 6 weeks. + +It is worth mentioning what Andrew Morton wrote on the linux-kernel +mailing list about kernel releases: + "Nobody knows when a kernel will be released, because it's + released according to perceived bug status, not according to a + preconceived timeline." + +2.6.x.y -stable kernel tree +--------------------------- +Kernels with 4 digit versions are -stable kernels. They contain +relatively small and critical fixes for security problems or significant +regressions discovered in a given 2.6.x kernel. + +This is the recommended branch for users who want the most recent stable +kernel and are not interested in helping test development/experimental +versions. + +If no 2.6.x.y kernel is available, then the highest numbered 2.6.x +kernel is the current stable kernel. + +2.6.x.y are maintained by the "stable" team <stable@kernel.org>, and are +released almost every other week. + +The file Documentation/stable_kernel_rules.txt in the kernel tree +documents what kinds of changes are acceptable for the -stable tree, and +how the release process works. + +2.6.x -git patches +------------------ +These are daily snapshots of Linus' kernel tree which are managed in a +git repository (hence the name.) These patches are usually released +daily and represent the current state of Linus' tree. They are more +experimental than -rc kernels since they are generated automatically +without even a cursory glance to see if they are sane. + +2.6.x -mm kernel patches +------------------------ +These are experimental kernel patches released by Andrew Morton. Andrew +takes all of the different subsystem kernel trees and patches and mushes +them together, along with a lot of patches that have been plucked from +the linux-kernel mailing list. This tree serves as a proving ground for +new features and patches. Once a patch has proved its worth in -mm for +a while Andrew or the subsystem maintainer pushes it on to Linus for +inclusion in mainline. + +It is heavily encouraged that all new patches get tested in the -mm tree +before they are sent to Linus for inclusion in the main kernel tree. + +These kernels are not appropriate for use on systems that are supposed +to be stable and they are more risky to run than any of the other +branches. + +If you wish to help out with the kernel development process, please test +and use these kernel releases and provide feedback to the linux-kernel +mailing list if you have any problems, and if everything works properly. + +In addition to all the other experimental patches, these kernels usually +also contain any changes in the mainline -git kernels available at the +time of release. + +The -mm kernels are not released on a fixed schedule, but usually a few +-mm kernels are released in between each -rc kernel (1 to 3 is common). + +Subsystem Specific kernel trees and patches +------------------------------------------- +A number of the different kernel subsystem developers expose their +development trees so that others can see what is happening in the +different areas of the kernel. These trees are pulled into the -mm +kernel releases as described above. + +Here is a list of some of the different kernel trees available: + git trees: + - Kbuild development tree, Sam Ravnborg <sam@ravnborg.org> + kernel.org:/pub/scm/linux/kernel/git/sam/kbuild.git + + - ACPI development tree, Len Brown <len.brown@intel.com> + kernel.org:/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6.git + + - Block development tree, Jens Axboe <axboe@suse.de> + kernel.org:/pub/scm/linux/kernel/git/axboe/linux-2.6-block.git + + - DRM development tree, Dave Airlie <airlied@linux.ie> + kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6.git + + - ia64 development tree, Tony Luck <tony.luck@intel.com> + kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6.git + + - ieee1394 development tree, Jody McIntyre <scjody@modernduck.com> + kernel.org:/pub/scm/linux/kernel/git/scjody/ieee1394.git + + - infiniband, Roland Dreier <rolandd@cisco.com> + kernel.org:/pub/scm/linux/kernel/git/roland/infiniband.git + + - libata, Jeff Garzik <jgarzik@pobox.com> + kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git + + - network drivers, Jeff Garzik <jgarzik@pobox.com> + kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git + + - pcmcia, Dominik Brodowski <linux@dominikbrodowski.net> + kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6.git + + - SCSI, James Bottomley <James.Bottomley@SteelEye.com> + kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git + + Other git kernel trees can be found listed at http://kernel.org/git + + quilt trees: + - USB, PCI, Driver Core, and I2C, Greg Kroah-Hartman <gregkh@suse.de> + kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/ + + +Bug Reporting +------------- + +bugzilla.kernel.org is where the Linux kernel developers track kernel +bugs. Users are encouraged to report all bugs that they find in this +tool. For details on how to use the kernel bugzilla, please see: + http://test.kernel.org/bugzilla/faq.html + +The file REPORTING-BUGS in the main kernel source directory has a good +template for how to report a possible kernel bug, and details what kind +of information is needed by the kernel developers to help track down the +problem. + + +Mailing lists +------------- + +As some of the above documents describe, the majority of the core kernel +developers participate on the Linux Kernel Mailing list. Details on how +to subscribe and unsubscribe from the list can be found at: + http://vger.kernel.org/vger-lists.html#linux-kernel +There are archives of the mailing list on the web in many different +places. Use a search engine to find these archives. For example: + http://dir.gmane.org/gmane.linux.kernel +It is highly recommended that you search the archives about the topic +you want to bring up, before you post it to the list. A lot of things +already discussed in detail are only recorded at the mailing list +archives. + +Most of the individual kernel subsystems also have their own separate +mailing list where they do their development efforts. See the +MAINTAINERS file for a list of what these lists are for the different +groups. + +Many of the lists are hosted on kernel.org. Information on them can be +found at: + http://vger.kernel.org/vger-lists.html + +Please remember to follow good behavioral habits when using the lists. +Though a bit cheesy, the following URL has some simple guidelines for +interacting with the list (or any list): + http://www.albion.com/netiquette/ + +If multiple people respond to your mail, the CC: list of recipients may +get pretty large. Don't remove anybody from the CC: list without a good +reason, or don't reply only to the list address. Get used to receiving the +mail twice, one from the sender and the one from the list, and don't try +to tune that by adding fancy mail-headers, people will not like it. + +Remember to keep the context and the attribution of your replies intact, +keep the "John Kernelhacker wrote ...:" lines at the top of your reply, and +add your statements between the individual quoted sections instead of +writing at the top of the mail. + +If you add patches to your mail, make sure they are plain readable text +as stated in Documentation/SubmittingPatches. Kernel developers don't +want to deal with attachments or compressed patches; they may want +to comment on individual lines of your patch, which works only that way. +Make sure you use a mail program that does not mangle spaces and tab +characters. A good first test is to send the mail to yourself and try +to apply your own patch by yourself. If that doesn't work, get your +mail program fixed or change it until it works. + +Above all, please remember to show respect to other subscribers. + + +Working with the community +-------------------------- + +The goal of the kernel community is to provide the best possible kernel +there is. When you submit a patch for acceptance, it will be reviewed +on its technical merits and those alone. So, what should you be +expecting? + - criticism + - comments + - requests for change + - requests for justification + - silence + +Remember, this is part of getting your patch into the kernel. You have +to be able to take criticism and comments about your patches, evaluate +them at a technical level and either rework your patches or provide +clear and concise reasoning as to why those changes should not be made. +If there are no responses to your posting, wait a few days and try +again, sometimes things get lost in the huge volume. + +What should you not do? + - expect your patch to be accepted without question + - become defensive + - ignore comments + - resubmit the patch without making any of the requested changes + +In a community that is looking for the best technical solution possible, +there will always be differing opinions on how beneficial a patch is. +You have to be cooperative, and willing to adapt your idea to fit within +the kernel. Or at least be willing to prove your idea is worth it. +Remember, being wrong is acceptable as long as you are willing to work +toward a solution that is right. + +It is normal that the answers to your first patch might simply be a list +of a dozen things you should correct. This does _not_ imply that your +patch will not be accepted, and it is _not_ meant against you +personally. Simply correct all issues raised against your patch and +resend it. + + +Differences between the kernel community and corporate structures +----------------------------------------------------------------- + +The kernel community works differently than most traditional corporate +development environments. Here are a list of things that you can try to +do to try to avoid problems: + Good things to say regarding your proposed changes: + - "This solves multiple problems." + - "This deletes 2000 lines of code." + - "Here is a patch that explains what I am trying to describe." + - "I tested it on 5 different architectures..." + - "Here is a series of small patches that..." + - "This increases performance on typical machines..." + + Bad things you should avoid saying: + - "We did it this way in AIX/ptx/Solaris, so therefore it must be + good..." + - "I've being doing this for 20 years, so..." + - "This is required for my company to make money" + - "This is for our Enterprise product line." + - "Here is my 1000 page design document that describes my idea" + - "I've been working on this for 6 months..." + - "Here's a 5000 line patch that..." + - "I rewrote all of the current mess, and here it is..." + - "I have a deadline, and this patch needs to be applied now." + +Another way the kernel community is different than most traditional +software engineering work environments is the faceless nature of +interaction. One benefit of using email and irc as the primary forms of +communication is the lack of discrimination based on gender or race. +The Linux kernel work environment is accepting of women and minorities +because all you are is an email address. The international aspect also +helps to level the playing field because you can't guess gender based on +a person's name. A man may be named Andrea and a woman may be named Pat. +Most women who have worked in the Linux kernel and have expressed an +opinion have had positive experiences. + +The language barrier can cause problems for some people who are not +comfortable with English. A good grasp of the language can be needed in +order to get ideas across properly on mailing lists, so it is +recommended that you check your emails to make sure they make sense in +English before sending them. + + +Break up your changes +--------------------- + +The Linux kernel community does not gladly accept large chunks of code +dropped on it all at once. The changes need to be properly introduced, +discussed, and broken up into tiny, individual portions. This is almost +the exact opposite of what companies are used to doing. Your proposal +should also be introduced very early in the development process, so that +you can receive feedback on what you are doing. It also lets the +community feel that you are working with them, and not simply using them +as a dumping ground for your feature. However, don't send 50 emails at +one time to a mailing list, your patch series should be smaller than +that almost all of the time. + +The reasons for breaking things up are the following: + +1) Small patches increase the likelihood that your patches will be + applied, since they don't take much time or effort to verify for + correctness. A 5 line patch can be applied by a maintainer with + barely a second glance. However, a 500 line patch may take hours to + review for correctness (the time it takes is exponentially + proportional to the size of the patch, or something). + + Small patches also make it very easy to debug when something goes + wrong. It's much easier to back out patches one by one than it is + to dissect a very large patch after it's been applied (and broken + something). + +2) It's important not only to send small patches, but also to rewrite + and simplify (or simply re-order) patches before submitting them. + +Here is an analogy from kernel developer Al Viro: + "Think of a teacher grading homework from a math student. The + teacher does not want to see the student's trials and errors + before they came up with the solution. They want to see the + cleanest, most elegant answer. A good student knows this, and + would never submit her intermediate work before the final + solution." + + The same is true of kernel development. The maintainers and + reviewers do not want to see the thought process behind the + solution to the problem one is solving. They want to see a + simple and elegant solution." + +It may be challenging to keep the balance between presenting an elegant +solution and working together with the community and discussing your +unfinished work. Therefore it is good to get early in the process to +get feedback to improve your work, but also keep your changes in small +chunks that they may get already accepted, even when your whole task is +not ready for inclusion now. + +Also realize that it is not acceptable to send patches for inclusion +that are unfinished and will be "fixed up later." + + +Justify your change +------------------- + +Along with breaking up your patches, it is very important for you to let +the Linux community know why they should add this change. New features +must be justified as being needed and useful. + + +Document your change +-------------------- + +When sending in your patches, pay special attention to what you say in +the text in your email. This information will become the ChangeLog +information for the patch, and will be preserved for everyone to see for +all time. It should describe the patch completely, containing: + - why the change is necessary + - the overall design approach in the patch + - implementation details + - testing results + +For more details on what this should all look like, please see the +ChangeLog section of the document: + "The Perfect Patch" + http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt + + + + +All of these things are sometimes very hard to do. It can take years to +perfect these practices (if at all). It's a continuous process of +improvement that requires a lot of patience and determination. But +don't give up, it's possible. Many have done it before, and each had to +start exactly where you are now. + + + + +---------- +Thanks to Paolo Ciarrocchi who allowed the "Development Process" section +to be based on text he had written, and to Randy Dunlap and Gerrit +Huizenga for some of the list of things you should and should not say. +Also thanks to Pat Mochel, Hanna Linder, Randy Dunlap, Kay Sievers, +Vojtech Pavlik, Jan Kara, Josh Boyer, Kees Cook, Andrew Morton, Andi +Kleen, Vadim Lobanov, Jesper Juhl, Adrian Bunk, Keri Harris, Frans Pop, +David A. Wheeler, Junio Hamano, Michael Kerrisk, and Alex Shepard for +their review, comments, and contributions. Without their help, this +document would not have been possible. + + + +Maintainer: Greg Kroah-Hartman <greg@kroah.com> diff --git a/MAINTAINERS b/MAINTAINERS index 509927e..f239ac4 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -58,6 +58,7 @@ P: Person M: Mail patches to L: Mailing list that is relevant to this area W: Web-page with status/info +T: SCM tree type and URL. Type is one of: git, hg, quilt. S: Status, one of the following: Supported: Someone is actually paid to look after this. @@ -183,6 +184,7 @@ P: Len Brown M: len.brown@intel.com L: acpi-devel@lists.sourceforge.net W: http://acpi.sourceforge.net/ +T: git kernel.org:/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6.git S: Maintained AD1816 SOUND DRIVER @@ -418,6 +420,7 @@ BLOCK LAYER P: Jens Axboe M: axboe@suse.de L: linux-kernel@vger.kernel.org +T: git kernel.org:/pub/scm/linux/kernel/git/axboe/linux-2.6-block.git S: Maintained BLUETOOTH SUBSYSTEM @@ -803,12 +806,14 @@ DRIVER CORE, KOBJECTS, AND SYSFS P: Greg Kroah-Hartman M: gregkh@suse.de L: linux-kernel@vger.kernel.org +T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/ S: Supported DRM DRIVERS P: David Airlie M: airlied@linux.ie L: dri-devel@lists.sourceforge.net +T: git kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6.git S: Maintained DSCC4 DRIVER @@ -1113,6 +1118,7 @@ P: Jean Delvare M: khali@linux-fr.org L: lm-sensors@lm-sensors.org W: http://www.lm-sensors.nu/ +T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/ S: Maintained I2O @@ -1145,6 +1151,7 @@ P: Tony Luck M: tony.luck@intel.com L: linux-ia64@vger.kernel.org W: http://www.ia64-linux.org/ +T: git kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6.git S: Maintained SN-IA64 (Itanium) SUB-PLATFORM @@ -1212,6 +1219,7 @@ P: Jody McIntyre M: scjody@steamballoon.com L: linux1394-devel@lists.sourceforge.net W: http://www.linux1394.org/ +T: git kernel.org:/pub/scm/linux/kernel/git/scjody/ieee1394.git S: Maintained IEEE 1394 OHCI DRIVER @@ -1263,6 +1271,7 @@ P: Hal Rosenstock M: halr@voltaire.com L: openib-general@openib.org W: http://www.openib.org/ +T: git kernel.org:/pub/scm/linux/kernel/git/roland/infiniband.git S: Supported INPUT (KEYBOARD, MOUSE, JOYSTICK) DRIVERS @@ -1436,6 +1445,7 @@ P: Kai Germaschewski M: kai@germaschewski.name P: Sam Ravnborg M: sam@ravnborg.org +T: git kernel.org:/pub/scm/linux/kernel/git/sam/kbuild.git S: Maintained KERNEL JANITORS @@ -1782,6 +1792,7 @@ M: akpm@osdl.org P: Jeff Garzik M: jgarzik@pobox.com L: netdev@vger.kernel.org +T: git kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git S: Maintained NETWORKING [GENERAL] @@ -1959,6 +1970,7 @@ P: Greg Kroah-Hartman M: gregkh@suse.de L: linux-kernel@vger.kernel.org L: linux-pci@atrey.karlin.mff.cuni.cz +T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/ S: Supported PCI HOTPLUG CORE @@ -1980,6 +1992,7 @@ S: Maintained PCMCIA SUBSYSTEM P: Linux PCMCIA Team L: http://lists.infradead.org/mailman/listinfo/linux-pcmcia +T: git kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6.git S: Maintained PCNET32 NETWORK DRIVER @@ -2189,6 +2202,7 @@ SCSI SUBSYSTEM P: James E.J. Bottomley M: James.Bottomley@SteelEye.com L: linux-scsi@vger.kernel.org +T: git kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git S: Maintained SCSI TAPE DRIVER @@ -2228,6 +2242,7 @@ SERIAL ATA (SATA) SUBSYSTEM: P: Jeff Garzik M: jgarzik@pobox.com L: linux-ide@vger.kernel.org +T: git kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git S: Supported SGI SN-IA64 (Altix) SERIAL CONSOLE DRIVER @@ -2749,6 +2764,7 @@ M: gregkh@suse.de L: linux-usb-users@lists.sourceforge.net L: linux-usb-devel@lists.sourceforge.net W: http://www.linux-usb.org +T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/ S: Supported USB UHCI DRIVER diff --git a/arch/ia64/kernel/ivt.S b/arch/ia64/kernel/ivt.S index e06f21f..301f2e9 100644 --- a/arch/ia64/kernel/ivt.S +++ b/arch/ia64/kernel/ivt.S @@ -91,16 +91,17 @@ ENTRY(vhpt_miss) * (the "original") TLB miss, which may either be caused by an instruction * fetch or a data access (or non-access). * - * What we do here is normal TLB miss handing for the _original_ miss, followed - * by inserting the TLB entry for the virtual page table page that the VHPT - * walker was attempting to access. The latter gets inserted as long - * as both L1 and L2 have valid mappings for the faulting address. - * The TLB entry for the original miss gets inserted only if - * the L3 entry indicates that the page is present. + * What we do here is normal TLB miss handing for the _original_ miss, + * followed by inserting the TLB entry for the virtual page table page + * that the VHPT walker was attempting to access. The latter gets + * inserted as long as page table entry above pte level have valid + * mappings for the faulting address. The TLB entry for the original + * miss gets inserted only if the pte entry indicates that the page is + * present. * * do_page_fault gets invoked in the following cases: * - the faulting virtual address uses unimplemented address bits - * - the faulting virtual address has no L1, L2, or L3 mapping + * - the faulting virtual address has no valid page table mapping */ mov r16=cr.ifa // get address that caused the TLB miss #ifdef CONFIG_HUGETLB_PAGE @@ -126,7 +127,7 @@ ENTRY(vhpt_miss) #endif ;; cmp.eq p6,p7=5,r17 // is IFA pointing into to region 5? - shr.u r18=r22,PGDIR_SHIFT // get bits 33-63 of the faulting address + shr.u r18=r22,PGDIR_SHIFT // get bottom portion of pgd index bit ;; (p7) dep r17=r17,r19,(PAGE_SHIFT-3),3 // put region number bits in place @@ -137,38 +138,38 @@ ENTRY(vhpt_miss) (p6) shr.u r21=r21,PGDIR_SHIFT+PAGE_SHIFT (p7) shr.u r21=r21,PGDIR_SHIFT+PAGE_SHIFT-3 ;; -(p6) dep r17=r18,r19,3,(PAGE_SHIFT-3) // r17=PTA + IFA(33,42)*8 -(p7) dep r17=r18,r17,3,(PAGE_SHIFT-6) // r17=PTA + (((IFA(61,63) << 7) | IFA(33,39))*8) +(p6) dep r17=r18,r19,3,(PAGE_SHIFT-3) // r17=pgd_offset for region 5 +(p7) dep r17=r18,r17,3,(PAGE_SHIFT-6) // r17=pgd_offset for region[0-4] cmp.eq p7,p6=0,r21 // unused address bits all zeroes? #ifdef CONFIG_PGTABLE_4 - shr.u r28=r22,PUD_SHIFT // shift L2 index into position + shr.u r28=r22,PUD_SHIFT // shift pud index into position #else - shr.u r18=r22,PMD_SHIFT // shift L3 index into position + shr.u r18=r22,PMD_SHIFT // shift pmd index into position #endif ;; - ld8 r17=[r17] // fetch the L1 entry (may be 0) + ld8 r17=[r17] // get *pgd (may be 0) ;; -(p7) cmp.eq p6,p7=r17,r0 // was L1 entry NULL? +(p7) cmp.eq p6,p7=r17,r0 // was pgd_present(*pgd) == NULL? #ifdef CONFIG_PGTABLE_4 - dep r28=r28,r17,3,(PAGE_SHIFT-3) // compute address of L2 page table entry + dep r28=r28,r17,3,(PAGE_SHIFT-3) // r28=pud_offset(pgd,addr) ;; - shr.u r18=r22,PMD_SHIFT // shift L3 index into position -(p7) ld8 r29=[r28] // fetch the L2 entry (may be 0) + shr.u r18=r22,PMD_SHIFT // shift pmd index into position +(p7) ld8 r29=[r28] // get *pud (may be 0) ;; -(p7) cmp.eq.or.andcm p6,p7=r29,r0 // was L2 entry NULL? - dep r17=r18,r29,3,(PAGE_SHIFT-3) // compute address of L3 page table entry +(p7) cmp.eq.or.andcm p6,p7=r29,r0 // was pud_present(*pud) == NULL? + dep r17=r18,r29,3,(PAGE_SHIFT-3) // r17=pmd_offset(pud,addr) #else - dep r17=r18,r17,3,(PAGE_SHIFT-3) // compute address of L3 page table entry + dep r17=r18,r17,3,(PAGE_SHIFT-3) // r17=pmd_offset(pgd,addr) #endif ;; -(p7) ld8 r20=[r17] // fetch the L3 entry (may be 0) - shr.u r19=r22,PAGE_SHIFT // shift L4 index into position +(p7) ld8 r20=[r17] // get *pmd (may be 0) + shr.u r19=r22,PAGE_SHIFT // shift pte index into position ;; -(p7) cmp.eq.or.andcm p6,p7=r20,r0 // was L3 entry NULL? - dep r21=r19,r20,3,(PAGE_SHIFT-3) // compute address of L4 page table entry +(p7) cmp.eq.or.andcm p6,p7=r20,r0 // was pmd_present(*pmd) == NULL? + dep r21=r19,r20,3,(PAGE_SHIFT-3) // r21=pte_offset(pmd,addr) ;; -(p7) ld8 r18=[r21] // read the L4 PTE - mov r19=cr.isr // cr.isr bit 0 tells us if this is an insn miss +(p7) ld8 r18=[r21] // read *pte + mov r19=cr.isr // cr.isr bit 32 tells us if this is an insn miss ;; (p7) tbit.z p6,p7=r18,_PAGE_P_BIT // page present bit cleared? mov r22=cr.iha // get the VHPT address that caused the TLB miss @@ -202,25 +203,33 @@ ENTRY(vhpt_miss) dv_serialize_data /* - * Re-check L2 and L3 pagetable. If they changed, we may have received a ptc.g + * Re-check pagetable entry. If they changed, we may have received a ptc.g * between reading the pagetable and the "itc". If so, flush the entry we - * inserted and retry. + * inserted and retry. At this point, we have: + * + * r28 = equivalent of pud_offset(pgd, ifa) + * r17 = equivalent of pmd_offset(pud, ifa) + * r21 = equivalent of pte_offset(pmd, ifa) + * + * r29 = *pud + * r20 = *pmd + * r18 = *pte */ - ld8 r25=[r21] // read L4 entry again - ld8 r26=[r17] // read L3 PTE again + ld8 r25=[r21] // read *pte again + ld8 r26=[r17] // read *pmd again #ifdef CONFIG_PGTABLE_4 - ld8 r18=[r28] // read L2 entry again + ld8 r19=[r28] // read *pud again #endif cmp.ne p6,p7=r0,r0 ;; - cmp.ne.or.andcm p6,p7=r26,r20 // did L3 entry change + cmp.ne.or.andcm p6,p7=r26,r20 // did *pmd change #ifdef CONFIG_PGTABLE_4 - cmp.ne.or.andcm p6,p7=r29,r18 // did L4 PTE change + cmp.ne.or.andcm p6,p7=r19,r29 // did *pud change #endif mov r27=PAGE_SHIFT<<2 ;; (p6) ptc.l r22,r27 // purge PTE page translation -(p7) cmp.ne.or.andcm p6,p7=r25,r18 // did L4 PTE change +(p7) cmp.ne.or.andcm p6,p7=r25,r18 // did *pte change ;; (p6) ptc.l r16,r27 // purge translation #endif @@ -235,19 +244,19 @@ END(vhpt_miss) ENTRY(itlb_miss) DBG_FAULT(1) /* - * The ITLB handler accesses the L3 PTE via the virtually mapped linear + * The ITLB handler accesses the PTE via the virtually mapped linear * page table. If a nested TLB miss occurs, we switch into physical - * mode, walk the page table, and then re-execute the L3 PTE read - * and go on normally after that. + * mode, walk the page table, and then re-execute the PTE read and + * go on normally after that. */ mov r16=cr.ifa // get virtual address mov r29=b0 // save b0 mov r31=pr // save predicates .itlb_fault: - mov r17=cr.iha // get virtual address of L3 PTE + mov r17=cr.iha // get virtual address of PTE movl r30=1f // load nested fault continuation point ;; -1: ld8 r18=[r17] // read L3 PTE +1: ld8 r18=[r17] // read *pte ;; mov b0=r29 tbit.z p6,p0=r18,_PAGE_P_BIT // page present bit cleared? @@ -262,7 +271,7 @@ ENTRY(itlb_miss) */ dv_serialize_data - ld8 r19=[r17] // read L3 PTE again and see if same + ld8 r19=[r17] // read *pte again and see if same mov r20=PAGE_SHIFT<<2 // setup page size for purge ;; cmp.ne p7,p0=r18,r19 @@ -279,19 +288,19 @@ END(itlb_miss) ENTRY(dtlb_miss) DBG_FAULT(2) /* - * The DTLB handler accesses the L3 PTE via the virtually mapped linear + * The DTLB handler accesses the PTE via the virtually mapped linear * page table. If a nested TLB miss occurs, we switch into physical - * mode, walk the page table, and then re-execute the L3 PTE read - * and go on normally after that. + * mode, walk the page table, and then re-execute the PTE read and + * go on normally after that. */ mov r16=cr.ifa // get virtual address mov r29=b0 // save b0 mov r31=pr // save predicates dtlb_fault: - mov r17=cr.iha // get virtual address of L3 PTE + mov r17=cr.iha // get virtual address of PTE movl r30=1f // load nested fault continuation point ;; -1: ld8 r18=[r17] // read L3 PTE +1: ld8 r18=[r17] // read *pte ;; mov b0=r29 tbit.z p6,p0=r18,_PAGE_P_BIT // page present bit cleared? @@ -306,7 +315,7 @@ dtlb_fault: */ dv_serialize_data - ld8 r19=[r17] // read L3 PTE again and see if same + ld8 r19=[r17] // read *pte again and see if same mov r20=PAGE_SHIFT<<2 // setup page size for purge ;; cmp.ne p7,p0=r18,r19 @@ -420,7 +429,7 @@ ENTRY(nested_dtlb_miss) * r30: continuation address * r31: saved pr * - * Output: r17: physical address of L3 PTE of faulting address + * Output: r17: physical address of PTE of faulting address * r29: saved b0 * r30: continuation address * r31: saved pr @@ -450,33 +459,33 @@ ENTRY(nested_dtlb_miss) (p6) shr.u r21=r21,PGDIR_SHIFT+PAGE_SHIFT (p7) shr.u r21=r21,PGDIR_SHIFT+PAGE_SHIFT-3 ;; -(p6) dep r17=r18,r19,3,(PAGE_SHIFT-3) // r17=PTA + IFA(33,42)*8 -(p7) dep r17=r18,r17,3,(PAGE_SHIFT-6) // r17=PTA + (((IFA(61,63) << 7) | IFA(33,39))*8) +(p6) dep r17=r18,r19,3,(PAGE_SHIFT-3) // r17=pgd_offset for region 5 +(p7) dep r17=r18,r17,3,(PAGE_SHIFT-6) // r17=pgd_offset for region[0-4] cmp.eq p7,p6=0,r21 // unused address bits all zeroes? #ifdef CONFIG_PGTABLE_4 - shr.u r18=r22,PUD_SHIFT // shift L2 index into position + shr.u r18=r22,PUD_SHIFT // shift pud index into position #else - shr.u r18=r22,PMD_SHIFT // shift L3 index into position + shr.u r18=r22,PMD_SHIFT // shift pmd index into position #endif ;; - ld8 r17=[r17] // fetch the L1 entry (may be 0) + ld8 r17=[r17] // get *pgd (may be 0) ;; -(p7) cmp.eq p6,p7=r17,r0 // was L1 entry NULL? - dep r17=r18,r17,3,(PAGE_SHIFT-3) // compute address of L2 page table entry +(p7) cmp.eq p6,p7=r17,r0 // was pgd_present(*pgd) == NULL? + dep r17=r18,r17,3,(PAGE_SHIFT-3) // r17=p[u|m]d_offset(pgd,addr) ;; #ifdef CONFIG_PGTABLE_4 -(p7) ld8 r17=[r17] // fetch the L2 entry (may be 0) - shr.u r18=r22,PMD_SHIFT // shift L3 index into position +(p7) ld8 r17=[r17] // get *pud (may be 0) + shr.u r18=r22,PMD_SHIFT // shift pmd index into position ;; -(p7) cmp.eq.or.andcm p6,p7=r17,r0 // was L2 entry NULL? - dep r17=r18,r17,3,(PAGE_SHIFT-3) // compute address of L2 page table entry +(p7) cmp.eq.or.andcm p6,p7=r17,r0 // was pud_present(*pud) == NULL? + dep r17=r18,r17,3,(PAGE_SHIFT-3) // r17=pmd_offset(pud,addr) ;; #endif -(p7) ld8 r17=[r17] // fetch the L3 entry (may be 0) - shr.u r19=r22,PAGE_SHIFT // shift L4 index into position +(p7) ld8 r17=[r17] // get *pmd (may be 0) + shr.u r19=r22,PAGE_SHIFT // shift pte index into position ;; -(p7) cmp.eq.or.andcm p6,p7=r17,r0 // was L3 entry NULL? - dep r17=r19,r17,3,(PAGE_SHIFT-3) // compute address of L4 page table entry +(p7) cmp.eq.or.andcm p6,p7=r17,r0 // was pmd_present(*pmd) == NULL? + dep r17=r19,r17,3,(PAGE_SHIFT-3) // r17=pte_offset(pmd,addr); (p6) br.cond.spnt page_fault mov b0=r30 br.sptk.many b0 // return to continuation point diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 94df74b..bb2efdd 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -598,19 +598,6 @@ config ARCH_MEMORY_PROBE def_bool y depends on MEMORY_HOTPLUG -# Some NUMA nodes have memory ranges that span -# other nodes. Even though a pfn is valid and -# between a node's start and end pfns, it may not -# reside on that node. -# -# This is a relatively temporary hack that should -# be able to go away when sparsemem is fully in -# place - -config NODES_SPAN_OTHER_NODES - def_bool y - depends on NEED_MULTIPLE_NODES - config PPC_64K_PAGES bool "64k page size" depends on PPC64 diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 99dbea8..98f67c7 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -33,6 +33,8 @@ endif export CROSS32CC CROSS32AS CROSS32LD CROSS32OBJCOPY +KBUILD_DEFCONFIG := $(shell uname -m)_defconfig + ifeq ($(CONFIG_PPC64),y) OLDARCH := ppc64 SZ := 64 @@ -111,9 +113,6 @@ cpu-as-$(CONFIG_E200) += -Wa,-me200 AFLAGS += $(cpu-as-y) CFLAGS += $(cpu-as-y) -# Default to the common case. -KBUILD_DEFCONFIG := common_defconfig - head-y := arch/powerpc/kernel/head_32.o head-$(CONFIG_PPC64) := arch/powerpc/kernel/head_64.o head-$(CONFIG_8xx) := arch/powerpc/kernel/head_8xx.o @@ -125,11 +124,11 @@ head-$(CONFIG_PPC64) += arch/powerpc/kernel/entry_64.o head-$(CONFIG_PPC_FPU) += arch/powerpc/kernel/fpu.o core-y += arch/powerpc/kernel/ \ - arch/$(OLDARCH)/kernel/ \ arch/powerpc/mm/ \ arch/powerpc/lib/ \ arch/powerpc/sysdev/ \ arch/powerpc/platforms/ +core-$(CONFIG_PPC32) += arch/ppc/kernel/ core-$(CONFIG_MATH_EMULATION) += arch/ppc/math-emu/ core-$(CONFIG_XMON) += arch/powerpc/xmon/ core-$(CONFIG_APUS) += arch/ppc/amiga/ @@ -165,7 +164,7 @@ define archhelp @echo ' (your) ~/bin/installkernel or' @echo ' (distribution) /sbin/installkernel or' @echo ' install to $$(INSTALL_PATH) and run lilo' - @echo ' *_defconfig - Select default config from arch/$(ARCH)/ppc/configs' + @echo ' *_defconfig - Select default config from arch/$(ARCH)/configs' endef archclean: diff --git a/arch/powerpc/boot/crt0.S b/arch/powerpc/boot/crt0.S index 9cc4422..d2f2ace 100644 --- a/arch/powerpc/boot/crt0.S +++ b/arch/powerpc/boot/crt0.S @@ -14,43 +14,42 @@ .text .globl _zimage_start _zimage_start: - bl reloc_offset + bl 1f -reloc_offset: +1: mflr r0 - lis r9,reloc_offset@ha - addi r9,r9,reloc_offset@l + lis r9,1b@ha + addi r9,r9,1b@l subf. r0,r9,r0 - beq clear_caches + beq 3f -reloc_got2: lis r9,__got2_start@ha addi r9,r9,__got2_start@l lis r8,__got2_end@ha addi r8,r8,__got2_end@l subf. r8,r9,r8 - beq clear_caches + beq 3f srwi. r8,r8,2 mtctr r8 add r9,r0,r9 -reloc_got2_loop: +2: lwz r8,0(r9) add r8,r8,r0 stw r8,0(r9) addi r9,r9,4 - bdnz reloc_got2_loop + bdnz 2b -clear_caches: +3: lis r9,_start@h add r9,r0,r9 lis r8,_etext@ha addi r8,r8,_etext@l add r8,r0,r8 -1: dcbf r0,r9 +4: dcbf r0,r9 icbi r0,r9 addi r9,r9,0x20 cmplwi 0,r9,8 - blt 1b + blt 4b sync isync diff --git a/arch/ppc64/defconfig b/arch/powerpc/configs/ppc64_defconfig index e79fd60..b5ba3bb 100644 --- a/arch/ppc64/defconfig +++ b/arch/powerpc/configs/ppc64_defconfig @@ -1,18 +1,33 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc4 -# Thu Oct 20 08:28:33 2005 +# Linux kernel version: 2.6.15-rc1 +# Fri Nov 18 16:23:24 2005 # +CONFIG_PPC64=y CONFIG_64BIT=y +CONFIG_PPC_MERGE=y CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_ISA_DMA=y +CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y +CONFIG_SYSVIPC_COMPAT=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_FORCE_MAX_ZONEORDER=13 + +# +# Processor support +# +# CONFIG_POWER4_ONLY is not set +CONFIG_POWER3=y +CONFIG_POWER4=y +CONFIG_PPC_FPU=y +CONFIG_ALTIVEC=y +CONFIG_PPC_STD_MMU=y +CONFIG_SMP=y +CONFIG_NR_CPUS=32 # # Code maturity level options @@ -41,7 +56,7 @@ CONFIG_CPUSETS=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set +CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_PRINTK=y CONFIG_BUG=y @@ -67,78 +82,115 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y CONFIG_STOP_MACHINE=y -CONFIG_SYSVIPC_COMPAT=y + +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" # # Platform support # -# CONFIG_PPC_ISERIES is not set CONFIG_PPC_MULTIPLATFORM=y +# CONFIG_PPC_ISERIES is not set +# CONFIG_EMBEDDED6xx is not set +# CONFIG_APUS is not set CONFIG_PPC_PSERIES=y -CONFIG_PPC_BPA=y CONFIG_PPC_PMAC=y +CONFIG_PPC_PMAC64=y CONFIG_PPC_MAPLE=y -CONFIG_PPC=y -CONFIG_PPC64=y +# CONFIG_PPC_CELL is not set CONFIG_PPC_OF=y CONFIG_XICS=y -CONFIG_MPIC=y -CONFIG_BPA_IIC=y -CONFIG_ALTIVEC=y -CONFIG_PPC_SPLPAR=y -CONFIG_KEXEC=y -CONFIG_IBMVIO=y CONFIG_U3_DART=y +CONFIG_MPIC=y +CONFIG_PPC_RTAS=y +CONFIG_RTAS_ERROR_LOGGING=y +CONFIG_RTAS_PROC=y +CONFIG_RTAS_FLASH=m +# CONFIG_MMIO_NVRAM is not set CONFIG_MPIC_BROKEN_U3=y -CONFIG_PPC_PMAC64=y -CONFIG_BOOTX_TEXT=y -# CONFIG_POWER4_ONLY is not set +CONFIG_IBMVIO=y +# CONFIG_PPC_MPC106 is not set +CONFIG_GENERIC_TBSYNC=y +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +# CONFIG_CPU_FREQ_DEBUG is not set +CONFIG_CPU_FREQ_STAT=y +# CONFIG_CPU_FREQ_STAT_DETAILS is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y +# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_PMAC64=y +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# Kernel options +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +# CONFIG_PREEMPT_BKL is not set +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_MISC=m +CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_IOMMU_VMERGE=y -CONFIG_SMP=y -CONFIG_NR_CPUS=32 +CONFIG_HOTPLUG_CPU=y +CONFIG_KEXEC=y +CONFIG_IRQ_ALL_CPUS=y +CONFIG_PPC_SPLPAR=y +CONFIG_EEH=y +CONFIG_SCANLOG=m +CONFIG_LPARCFG=y +# CONFIG_NUMA is not set CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_ARCH_DISCONTIGMEM_ENABLE=y -CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_SELECT_MEMORY_MODEL=y # CONFIG_FLATMEM_MANUAL is not set -CONFIG_DISCONTIGMEM_MANUAL=y -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_DISCONTIGMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_NEED_MULTIPLE_NODES=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_HAVE_MEMORY_PRESENT=y # CONFIG_SPARSEMEM_STATIC is not set -CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y -CONFIG_NODES_SPAN_OTHER_NODES=y -# CONFIG_NUMA is not set +CONFIG_SPARSEMEM_EXTREME=y +# CONFIG_MEMORY_HOTPLUG is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PPC_64K_PAGES is not set # CONFIG_SCHED_SMT is not set -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -# CONFIG_PREEMPT_BKL is not set -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_EEH=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_PPC_RTAS=y -CONFIG_RTAS_PROC=y -CONFIG_RTAS_FLASH=m -CONFIG_SCANLOG=m -CONFIG_LPARCFG=y -CONFIG_SECCOMP=y -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_MISC=m -CONFIG_HOTPLUG_CPU=y CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y # -# Bus Options +# Bus options # +CONFIG_GENERIC_ISA_DMA=y +CONFIG_PPC_I8259=y +# CONFIG_PPC_INDIRECT_PCI is not set CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_PCI_LEGACY_PROC is not set @@ -158,6 +210,7 @@ CONFIG_HOTPLUG_PCI=m # CONFIG_HOTPLUG_PCI_SHPC is not set CONFIG_HOTPLUG_PCI_RPA=m CONFIG_HOTPLUG_PCI_RPA_DLPAR=m +CONFIG_KERNEL_START=0xc000000000000000 # # Networking @@ -199,6 +252,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# CONFIG_NETFILTER_NETLINK=y CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m @@ -301,6 +358,10 @@ CONFIG_LLC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y @@ -338,13 +399,7 @@ CONFIG_FW_LOADER=y # # Parallel port support # -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -# CONFIG_PARPORT_SERIAL is not set -# CONFIG_PARPORT_PC_FIFO is not set -# CONFIG_PARPORT_PC_SUPERIO is not set -# CONFIG_PARPORT_GSC is not set -# CONFIG_PARPORT_1284 is not set +# CONFIG_PARPORT is not set # # Plug and Play support @@ -354,7 +409,6 @@ CONFIG_PARPORT_PC=m # Block devices # CONFIG_BLK_DEV_FD=y -# CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -370,14 +424,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=65536 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -407,7 +453,7 @@ CONFIG_IDEPCI_SHARE_IRQ=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_OPTI621 is not set -CONFIG_BLK_DEV_SL82C105=y +# CONFIG_BLK_DEV_SL82C105 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_IDEDMA_FORCED is not set CONFIG_IDEDMA_PCI_AUTO=y @@ -479,6 +525,7 @@ CONFIG_SCSI_ISCSI_ATTRS=m # # SCSI low-level drivers # +# CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -495,10 +542,12 @@ CONFIG_SCSI_SATA_SVW=y # CONFIG_SCSI_ATA_PIIX is not set # CONFIG_SCSI_SATA_MV is not set # CONFIG_SCSI_SATA_NV is not set -# CONFIG_SCSI_SATA_PROMISE is not set +# CONFIG_SCSI_PDC_ADMA is not set # CONFIG_SCSI_SATA_QSTOR is not set +# CONFIG_SCSI_SATA_PROMISE is not set # CONFIG_SCSI_SATA_SX4 is not set # CONFIG_SCSI_SATA_SIL is not set +# CONFIG_SCSI_SATA_SIL24 is not set # CONFIG_SCSI_SATA_SIS is not set # CONFIG_SCSI_SATA_ULI is not set # CONFIG_SCSI_SATA_VIA is not set @@ -512,8 +561,6 @@ CONFIG_SCSI_SATA_SVW=y CONFIG_SCSI_IBMVSCSI=y # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_PPA is not set -# CONFIG_SCSI_IMM is not set CONFIG_SCSI_SYM53C8XX_2=y CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 @@ -608,6 +655,9 @@ CONFIG_IEEE1394_AMDTP=m CONFIG_ADB_PMU=y CONFIG_PMAC_SMU=y CONFIG_THERM_PM72=y +CONFIG_WINDFARM=y +CONFIG_WINDFARM_PM81=y +CONFIG_WINDFARM_PM91=y # # Network device support @@ -664,7 +714,6 @@ CONFIG_E100=y # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_VIA_RHINE is not set -# CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) @@ -684,7 +733,6 @@ CONFIG_E1000=y # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y # CONFIG_BNX2 is not set -# CONFIG_SPIDER_NET is not set # CONFIG_MV643XX_ETH is not set # @@ -714,7 +762,6 @@ CONFIG_IBMOL=y # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set -# CONFIG_PLIP is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set # CONFIG_PPP_FILTER is not set @@ -722,6 +769,7 @@ CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set CONFIG_PPPOE=m # CONFIG_SLIP is not set # CONFIG_NET_FC is not set @@ -784,7 +832,6 @@ CONFIG_INPUT_PCSPKR=m CONFIG_SERIO=y CONFIG_SERIO_I8042=y # CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_PARKBD is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set @@ -817,10 +864,6 @@ CONFIG_SERIAL_JSM=m CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 -CONFIG_PRINTER=m -# CONFIG_LP_CONSOLE is not set -# CONFIG_PPDEV is not set -# CONFIG_TIPAR is not set CONFIG_HVC_CONSOLE=y CONFIG_HVCS=m @@ -834,6 +877,7 @@ CONFIG_HVCS=m # # CONFIG_WATCHDOG is not set # CONFIG_RTC is not set +# CONFIG_GEN_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -851,6 +895,7 @@ CONFIG_MAX_RAW_DEVS=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -879,7 +924,6 @@ CONFIG_I2C_AMD8111=y CONFIG_I2C_KEYWEST=y CONFIG_I2C_PMAC_SMU=y # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set @@ -904,6 +948,7 @@ CONFIG_I2C_PMAC_SMU=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -945,7 +990,6 @@ CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y CONFIG_FB_MACMODES=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y @@ -960,6 +1004,7 @@ CONFIG_FB_OF=y # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set CONFIG_FB_MATROX=y @@ -983,7 +1028,6 @@ CONFIG_FB_RADEON_I2C=y # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set -# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -992,6 +1036,7 @@ CONFIG_FB_RADEON_I2C=y # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y @@ -1012,7 +1057,94 @@ CONFIG_LCD_DEVICE=y # # Sound # -# CONFIG_SOUND is not set +CONFIG_SOUND=m + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_SEQUENCER=m +CONFIG_SND_SEQ_DUMMY=m +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_GENERIC_DRIVER=y + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# PCI devices +# +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_YMFPCI is not set +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS4000 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_HDA_INTEL is not set + +# +# ALSA PowerMac devices +# +CONFIG_SND_POWERMAC=m +CONFIG_SND_POWERMAC_AUTO_DRC=y + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_USX2Y is not set + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set # # USB support @@ -1046,12 +1178,16 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # USB Device Class drivers # -# CONFIG_USB_BLUETOOTH_TTY is not set +# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set @@ -1106,7 +1242,7 @@ CONFIG_USB_HIDDEV=y # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set -CONFIG_USB_PEGASUS=y +# CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set # CONFIG_USB_MON is not set @@ -1114,7 +1250,6 @@ CONFIG_USB_PEGASUS=y # # USB port drivers # -# CONFIG_USB_USS720 is not set # # USB Serial Converter support @@ -1163,6 +1298,7 @@ CONFIG_INFINIBAND_MTHCA=m # CONFIG_INFINIBAND_MTHCA_DEBUG is not set CONFIG_INFINIBAND_IPOIB=m # CONFIG_INFINIBAND_IPOIB_DEBUG is not set +# CONFIG_INFINIBAND_SRP is not set # # SN Devices @@ -1358,10 +1494,25 @@ CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m # -# Profiling support +# Library routines +# +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m + +# +# Instrumentation Support # CONFIG_PROFILING=y CONFIG_OPROFILE=y +# CONFIG_KPROBES is not set # # Kernel hacking @@ -1378,14 +1529,15 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y +# CONFIG_DEBUG_VM is not set +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_STACKOVERFLOW=y -# CONFIG_KPROBES is not set CONFIG_DEBUG_STACK_USAGE=y CONFIG_DEBUGGER=y CONFIG_XMON=y # CONFIG_XMON_DEFAULT is not set -# CONFIG_PPCDBG is not set CONFIG_IRQSTACKS=y +CONFIG_BOOTX_TEXT=y # # Security options @@ -1425,17 +1577,3 @@ CONFIG_CRYPTO_TEST=m # # Hardware crypto devices # - -# -# Library routines -# -CONFIG_CRC_CCITT=m -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index b4745c9..b589b19 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -165,7 +165,6 @@ CONFIG_SPARSEMEM_EXTREME=y # CONFIG_MEMORY_HOTPLUG is not set CONFIG_SPLIT_PTLOCK_CPUS=4096 CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y -CONFIG_NODES_SPAN_OTHER_NODES=y # CONFIG_PPC_64K_PAGES is not set CONFIG_SCHED_SMT=y CONFIG_PROC_DEVICETREE=y diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 4970e37..9ed551b 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -12,12 +12,12 @@ CFLAGS_btext.o += -fPIC endif obj-y := semaphore.o cputable.o ptrace.o syscalls.o \ - irq.o signal_32.o pmc.o vdso.o + irq.o align.o signal_32.o pmc.o vdso.o obj-y += vdso32/ obj-$(CONFIG_PPC64) += setup_64.o binfmt_elf32.o sys_ppc32.o \ signal_64.o ptrace32.o systbl.o \ paca.o ioctl32.o cpu_setup_power4.o \ - firmware.o sysfs.o udbg.o + firmware.o sysfs.o udbg.o idle_64.o obj-$(CONFIG_PPC64) += vdso64/ obj-$(CONFIG_ALTIVEC) += vecemu.o vector.o obj-$(CONFIG_POWER4) += idle_power4.o @@ -35,6 +35,7 @@ obj-$(CONFIG_PPC_PSERIES) += udbg_16550.o obj-$(CONFIG_PPC_MAPLE) += udbg_16550.o udbgscc-$(CONFIG_PPC64) := udbg_scc.o obj-$(CONFIG_PPC_PMAC) += $(udbgscc-y) +obj64-$(CONFIG_PPC_MULTIPLATFORM) += nvram_64.o ifeq ($(CONFIG_PPC_MERGE),y) @@ -78,5 +79,7 @@ smpobj-$(CONFIG_SMP) += smp.o endif +obj-$(CONFIG_PPC64) += $(obj64-y) + extra-$(CONFIG_PPC_FPU) += fpu.o extra-$(CONFIG_PPC64) += entry_64.o diff --git a/arch/ppc64/kernel/align.c b/arch/powerpc/kernel/align.c index 256d5b5..faaec9c 100644 --- a/arch/ppc64/kernel/align.c +++ b/arch/powerpc/kernel/align.c @@ -7,6 +7,9 @@ * PowerPC 403GCX/405GP modifications. * Copyright (c) 2001-2002 PPC64 team, IBM Corp * 64-bit and Power4 support + * Copyright (c) 2005 Benjamin Herrenschmidt, IBM Corp + * <benh@kernel.crashing.org> + * Merge ppc32 and ppc64 implementations * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -38,10 +41,15 @@ struct aligninfo { #define F 8 /* to/from fp regs */ #define U 0x10 /* update index register */ #define M 0x20 /* multiple load/store */ -#define SW 0x40 /* byte swap */ +#define SW 0x40 /* byte swap int or ... */ +#define S 0x40 /* ... single-precision fp */ +#define SX 0x40 /* byte count in XER */ +#define HARD 0x80 /* string, stwcx. */ #define DCBZ 0x5f /* 8xx/82xx dcbz faults when cache not enabled */ +#define SWAP(a, b) (t = (a), (a) = (b), (b) = t) + /* * The PowerPC stores certain bits of the instruction that caused the * alignment exception in the DSISR register. This array maps those @@ -57,14 +65,14 @@ static struct aligninfo aligninfo[128] = { { 2, LD+SE }, /* 00 0 0101: lha */ { 2, ST }, /* 00 0 0110: sth */ { 4, LD+M }, /* 00 0 0111: lmw */ - { 4, LD+F }, /* 00 0 1000: lfs */ + { 4, LD+F+S }, /* 00 0 1000: lfs */ { 8, LD+F }, /* 00 0 1001: lfd */ - { 4, ST+F }, /* 00 0 1010: stfs */ + { 4, ST+F+S }, /* 00 0 1010: stfs */ { 8, ST+F }, /* 00 0 1011: stfd */ INVALID, /* 00 0 1100 */ - { 8, LD }, /* 00 0 1101: ld */ + { 8, LD }, /* 00 0 1101: ld/ldu/lwa */ INVALID, /* 00 0 1110 */ - { 8, ST }, /* 00 0 1111: std */ + { 8, ST }, /* 00 0 1111: std/stdu */ { 4, LD+U }, /* 00 1 0000: lwzu */ INVALID, /* 00 1 0001 */ { 4, ST+U }, /* 00 1 0010: stwu */ @@ -73,9 +81,9 @@ static struct aligninfo aligninfo[128] = { { 2, LD+SE+U }, /* 00 1 0101: lhau */ { 2, ST+U }, /* 00 1 0110: sthu */ { 4, ST+M }, /* 00 1 0111: stmw */ - { 4, LD+F+U }, /* 00 1 1000: lfsu */ + { 4, LD+F+S+U }, /* 00 1 1000: lfsu */ { 8, LD+F+U }, /* 00 1 1001: lfdu */ - { 4, ST+F+U }, /* 00 1 1010: stfsu */ + { 4, ST+F+S+U }, /* 00 1 1010: stfsu */ { 8, ST+F+U }, /* 00 1 1011: stfdu */ INVALID, /* 00 1 1100 */ INVALID, /* 00 1 1101 */ @@ -89,10 +97,10 @@ static struct aligninfo aligninfo[128] = { { 4, LD+SE }, /* 01 0 0101: lwax */ INVALID, /* 01 0 0110 */ INVALID, /* 01 0 0111 */ - { 0, LD }, /* 01 0 1000: lswx */ - { 0, LD }, /* 01 0 1001: lswi */ - { 0, ST }, /* 01 0 1010: stswx */ - { 0, ST }, /* 01 0 1011: stswi */ + { 4, LD+M+HARD+SX }, /* 01 0 1000: lswx */ + { 4, LD+M+HARD }, /* 01 0 1001: lswi */ + { 4, ST+M+HARD+SX }, /* 01 0 1010: stswx */ + { 4, ST+M+HARD }, /* 01 0 1011: stswi */ INVALID, /* 01 0 1100 */ { 8, LD+U }, /* 01 0 1101: ldu */ INVALID, /* 01 0 1110 */ @@ -115,7 +123,7 @@ static struct aligninfo aligninfo[128] = { INVALID, /* 01 1 1111 */ INVALID, /* 10 0 0000 */ INVALID, /* 10 0 0001 */ - { 0, ST }, /* 10 0 0010: stwcx. */ + INVALID, /* 10 0 0010: stwcx. */ INVALID, /* 10 0 0011 */ INVALID, /* 10 0 0100 */ INVALID, /* 10 0 0101 */ @@ -144,7 +152,7 @@ static struct aligninfo aligninfo[128] = { INVALID, /* 10 1 1100 */ INVALID, /* 10 1 1101 */ INVALID, /* 10 1 1110 */ - { L1_CACHE_BYTES, ST }, /* 10 1 1111: dcbz */ + { 0, ST+HARD }, /* 10 1 1111: dcbz */ { 4, LD }, /* 11 0 0000: lwzx */ INVALID, /* 11 0 0001 */ { 4, ST }, /* 11 0 0010: stwx */ @@ -153,9 +161,9 @@ static struct aligninfo aligninfo[128] = { { 2, LD+SE }, /* 11 0 0101: lhax */ { 2, ST }, /* 11 0 0110: sthx */ INVALID, /* 11 0 0111 */ - { 4, LD+F }, /* 11 0 1000: lfsx */ + { 4, LD+F+S }, /* 11 0 1000: lfsx */ { 8, LD+F }, /* 11 0 1001: lfdx */ - { 4, ST+F }, /* 11 0 1010: stfsx */ + { 4, ST+F+S }, /* 11 0 1010: stfsx */ { 8, ST+F }, /* 11 0 1011: stfdx */ INVALID, /* 11 0 1100 */ { 8, LD+M }, /* 11 0 1101: lmd */ @@ -169,9 +177,9 @@ static struct aligninfo aligninfo[128] = { { 2, LD+SE+U }, /* 11 1 0101: lhaux */ { 2, ST+U }, /* 11 1 0110: sthux */ INVALID, /* 11 1 0111 */ - { 4, LD+F+U }, /* 11 1 1000: lfsux */ + { 4, LD+F+S+U }, /* 11 1 1000: lfsux */ { 8, LD+F+U }, /* 11 1 1001: lfdux */ - { 4, ST+F+U }, /* 11 1 1010: stfsux */ + { 4, ST+F+S+U }, /* 11 1 1010: stfsux */ { 8, ST+F+U }, /* 11 1 1011: stfdux */ INVALID, /* 11 1 1100 */ INVALID, /* 11 1 1101 */ @@ -179,45 +187,175 @@ static struct aligninfo aligninfo[128] = { INVALID, /* 11 1 1111 */ }; -#define SWAP(a, b) (t = (a), (a) = (b), (b) = t) - +/* + * Create a DSISR value from the instruction + */ static inline unsigned make_dsisr(unsigned instr) { unsigned dsisr; - - /* create a DSISR value from the instruction */ - dsisr = (instr & 0x03ff0000) >> 16; /* bits 6:15 --> 22:31 */ - - if ( IS_XFORM(instr) ) { - dsisr |= (instr & 0x00000006) << 14; /* bits 29:30 --> 15:16 */ - dsisr |= (instr & 0x00000040) << 8; /* bit 25 --> 17 */ - dsisr |= (instr & 0x00000780) << 3; /* bits 21:24 --> 18:21 */ + + + /* bits 6:15 --> 22:31 */ + dsisr = (instr & 0x03ff0000) >> 16; + + if (IS_XFORM(instr)) { + /* bits 29:30 --> 15:16 */ + dsisr |= (instr & 0x00000006) << 14; + /* bit 25 --> 17 */ + dsisr |= (instr & 0x00000040) << 8; + /* bits 21:24 --> 18:21 */ + dsisr |= (instr & 0x00000780) << 3; + } else { + /* bit 5 --> 17 */ + dsisr |= (instr & 0x04000000) >> 12; + /* bits 1: 4 --> 18:21 */ + dsisr |= (instr & 0x78000000) >> 17; + /* bits 30:31 --> 12:13 */ + if (IS_DSFORM(instr)) + dsisr |= (instr & 0x00000003) << 18; } - else { - dsisr |= (instr & 0x04000000) >> 12; /* bit 5 --> 17 */ - dsisr |= (instr & 0x78000000) >> 17; /* bits 1: 4 --> 18:21 */ - if ( IS_DSFORM(instr) ) { - dsisr |= (instr & 0x00000003) << 18; /* bits 30:31 --> 12:13 */ + + return dsisr; +} + +/* + * The dcbz (data cache block zero) instruction + * gives an alignment fault if used on non-cacheable + * memory. We handle the fault mainly for the + * case when we are running with the cache disabled + * for debugging. + */ +static int emulate_dcbz(struct pt_regs *regs, unsigned char __user *addr) +{ + long __user *p; + int i, size; + +#ifdef __powerpc64__ + size = ppc64_caches.dline_size; +#else + size = L1_CACHE_BYTES; +#endif + p = (long __user *) (regs->dar & -size); + if (user_mode(regs) && !access_ok(VERIFY_WRITE, p, size)) + return -EFAULT; + for (i = 0; i < size / sizeof(long); ++i) + if (__put_user(0, p+i)) + return -EFAULT; + return 1; +} + +/* + * Emulate load & store multiple instructions + * On 64-bit machines, these instructions only affect/use the + * bottom 4 bytes of each register, and the loads clear the + * top 4 bytes of the affected register. + */ +#ifdef CONFIG_PPC64 +#define REG_BYTE(rp, i) *((u8 *)((rp) + ((i) >> 2)) + ((i) & 3) + 4) +#else +#define REG_BYTE(rp, i) *((u8 *)(rp) + (i)) +#endif + +static int emulate_multiple(struct pt_regs *regs, unsigned char __user *addr, + unsigned int reg, unsigned int nb, + unsigned int flags, unsigned int instr) +{ + unsigned long *rptr; + unsigned int nb0, i; + + /* + * We do not try to emulate 8 bytes multiple as they aren't really + * available in our operating environments and we don't try to + * emulate multiples operations in kernel land as they should never + * be used/generated there at least not on unaligned boundaries + */ + if (unlikely((nb > 4) || !user_mode(regs))) + return 0; + + /* lmw, stmw, lswi/x, stswi/x */ + nb0 = 0; + if (flags & HARD) { + if (flags & SX) { + nb = regs->xer & 127; + if (nb == 0) + return 1; + } else { + if (__get_user(instr, + (unsigned int __user *)regs->nip)) + return -EFAULT; + nb = (instr >> 11) & 0x1f; + if (nb == 0) + nb = 32; } + if (nb + reg * 4 > 128) { + nb0 = nb + reg * 4 - 128; + nb = 128 - reg * 4; + } + } else { + /* lwm, stmw */ + nb = (32 - reg) * 4; } - - return dsisr; + + if (!access_ok((flags & ST ? VERIFY_WRITE: VERIFY_READ), addr, nb+nb0)) + return -EFAULT; /* bad address */ + + rptr = ®s->gpr[reg]; + if (flags & LD) { + /* + * This zeroes the top 4 bytes of the affected registers + * in 64-bit mode, and also zeroes out any remaining + * bytes of the last register for lsw*. + */ + memset(rptr, 0, ((nb + 3) / 4) * sizeof(unsigned long)); + if (nb0 > 0) + memset(®s->gpr[0], 0, + ((nb0 + 3) / 4) * sizeof(unsigned long)); + + for (i = 0; i < nb; ++i) + if (__get_user(REG_BYTE(rptr, i), addr + i)) + return -EFAULT; + if (nb0 > 0) { + rptr = ®s->gpr[0]; + addr += nb; + for (i = 0; i < nb0; ++i) + if (__get_user(REG_BYTE(rptr, i), addr + i)) + return -EFAULT; + } + + } else { + for (i = 0; i < nb; ++i) + if (__put_user(REG_BYTE(rptr, i), addr + i)) + return -EFAULT; + if (nb0 > 0) { + rptr = ®s->gpr[0]; + addr += nb; + for (i = 0; i < nb0; ++i) + if (__put_user(REG_BYTE(rptr, i), addr + i)) + return -EFAULT; + } + } + return 1; } -int -fix_alignment(struct pt_regs *regs) + +/* + * Called on alignment exception. Attempts to fixup + * + * Return 1 on success + * Return 0 if unable to handle the interrupt + * Return -EFAULT if data address is bad + */ + +int fix_alignment(struct pt_regs *regs) { unsigned int instr, nb, flags; - int t; - unsigned long reg, areg; - unsigned long i; - int ret; - unsigned dsisr; + unsigned int reg, areg; + unsigned int dsisr; unsigned char __user *addr; unsigned char __user *p; - unsigned long __user *lp; + int ret, t; union { - long ll; + u64 ll; double dd; unsigned char v[8]; struct { @@ -231,18 +369,22 @@ fix_alignment(struct pt_regs *regs) } data; /* - * Return 1 on success - * Return 0 if unable to handle the interrupt - * Return -EFAULT if data address is bad + * We require a complete register set, if not, then our assembly + * is broken */ + CHECK_FULL_REGS(regs); dsisr = regs->dsisr; + /* Some processors don't provide us with a DSISR we can use here, + * let's make one up from the instruction + */ if (cpu_has_feature(CPU_FTR_NODSISRALIGN)) { - unsigned int real_instr; - if (__get_user(real_instr, (unsigned int __user *)regs->nip)) - return 0; - dsisr = make_dsisr(real_instr); + unsigned int real_instr; + if (unlikely(__get_user(real_instr, + (unsigned int __user *)regs->nip))) + return -EFAULT; + dsisr = make_dsisr(real_instr); } /* extract the operation and registers from the dsisr */ @@ -258,33 +400,37 @@ fix_alignment(struct pt_regs *regs) /* DAR has the operand effective address */ addr = (unsigned char __user *)regs->dar; - /* A size of 0 indicates an instruction we don't support */ - /* we also don't support the multiples (lmw, stmw, lmd, stmd) */ - if ((nb == 0) || (flags & M)) - return 0; /* too hard or invalid instruction */ - - /* - * Special handling for dcbz - * dcbz may give an alignment exception for accesses to caching inhibited - * storage + /* A size of 0 indicates an instruction we don't support, with + * the exception of DCBZ which is handled as a special case here */ if (instr == DCBZ) - addr = (unsigned char __user *) ((unsigned long)addr & -L1_CACHE_BYTES); + return emulate_dcbz(regs, addr); + if (unlikely(nb == 0)) + return 0; + + /* Load/Store Multiple instructions are handled in their own + * function + */ + if (flags & M) + return emulate_multiple(regs, addr, reg, nb, flags, instr); /* Verify the address of the operand */ - if (user_mode(regs)) { - if (!access_ok((flags & ST? VERIFY_WRITE: VERIFY_READ), addr, nb)) - return -EFAULT; /* bad address */ - } + if (unlikely(user_mode(regs) && + !access_ok((flags & ST ? VERIFY_WRITE : VERIFY_READ), + addr, nb))) + return -EFAULT; /* Force the fprs into the save area so we can reference them */ if (flags & F) { - if (!user_mode(regs)) + /* userland only */ + if (unlikely(!user_mode(regs))) return 0; flush_fp_to_thread(current); } - - /* If we are loading, get the data from user space */ + + /* If we are loading, get the data from user space, else + * get it from register values + */ if (flags & LD) { data.ll = 0; ret = 0; @@ -301,75 +447,62 @@ fix_alignment(struct pt_regs *regs) case 2: ret |= __get_user(data.v[6], p++); ret |= __get_user(data.v[7], p++); - if (ret) + if (unlikely(ret)) return -EFAULT; } - } - - /* If we are storing, get the data from the saved gpr or fpr */ - if (flags & ST) { - if (flags & F) { - if (nb == 4) { - /* Doing stfs, have to convert to single */ - preempt_disable(); - enable_kernel_fp(); - cvt_df(¤t->thread.fpr[reg], (float *)&data.v[4], ¤t->thread); - disable_kernel_fp(); - preempt_enable(); - } - else - data.dd = current->thread.fpr[reg]; - } - else - data.ll = regs->gpr[reg]; - } - - /* Swap bytes as needed */ - if (flags & SW) { - if (nb == 2) - SWAP(data.v[6], data.v[7]); - else { /* nb must be 4 */ - SWAP(data.v[4], data.v[7]); - SWAP(data.v[5], data.v[6]); - } - } - - /* Sign extend as needed */ - if (flags & SE) { + } else if (flags & F) + data.dd = current->thread.fpr[reg]; + else + data.ll = regs->gpr[reg]; + + /* Perform other misc operations like sign extension, byteswap, + * or floating point single precision conversion + */ + switch (flags & ~U) { + case LD+SE: /* sign extend */ if ( nb == 2 ) data.ll = data.x16.low16; else /* nb must be 4 */ data.ll = data.x32.low32; - } - - /* If we are loading, move the data to the gpr or fpr */ - if (flags & LD) { - if (flags & F) { - if (nb == 4) { - /* Doing lfs, have to convert to double */ - preempt_disable(); - enable_kernel_fp(); - cvt_fd((float *)&data.v[4], ¤t->thread.fpr[reg], ¤t->thread); - disable_kernel_fp(); - preempt_enable(); - } - else - current->thread.fpr[reg] = data.dd; + break; + case LD+S: /* byte-swap */ + case ST+S: + if (nb == 2) { + SWAP(data.v[6], data.v[7]); + } else { + SWAP(data.v[4], data.v[7]); + SWAP(data.v[5], data.v[6]); } - else - regs->gpr[reg] = data.ll; + break; + + /* Single-precision FP load and store require conversions... */ + case LD+F+S: +#ifdef CONFIG_PPC_FPU + preempt_disable(); + enable_kernel_fp(); + cvt_fd((float *)&data.v[4], &data.dd, ¤t->thread); + preempt_enable(); +#else + return 0; +#endif + break; + case ST+F+S: +#ifdef CONFIG_PPC_FPU + preempt_disable(); + enable_kernel_fp(); + cvt_df(&data.dd, (float *)&data.v[4], ¤t->thread); + preempt_enable(); +#else + return 0; +#endif + break; } - - /* If we are storing, copy the data to the user */ + + /* Store result to memory or update registers */ if (flags & ST) { ret = 0; p = addr; switch (nb) { - case 128: /* Special case - must be dcbz */ - lp = (unsigned long __user *)p; - for (i = 0; i < L1_CACHE_BYTES / sizeof(long); ++i) - ret |= __put_user(0, lp++); - break; case 8: ret |= __put_user(data.v[0], p++); ret |= __put_user(data.v[1], p++); @@ -382,15 +515,16 @@ fix_alignment(struct pt_regs *regs) ret |= __put_user(data.v[6], p++); ret |= __put_user(data.v[7], p++); } - if (ret) + if (unlikely(ret)) return -EFAULT; - } - + } else if (flags & F) + current->thread.fpr[reg] = data.dd; + else + regs->gpr[reg] = data.ll; + /* Update RA as needed */ - if (flags & U) { + if (flags & U) regs->gpr[areg] = regs->dar; - } return 1; } - diff --git a/arch/ppc64/kernel/idle.c b/arch/powerpc/kernel/idle_64.c index b879d30..b879d30 100644 --- a/arch/ppc64/kernel/idle.c +++ b/arch/powerpc/kernel/idle_64.c diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S index f6d84a7..624a983 100644 --- a/arch/powerpc/kernel/misc_32.S +++ b/arch/powerpc/kernel/misc_32.S @@ -27,14 +27,6 @@ .text - .align 5 -_GLOBAL(__delay) - cmpwi 0,r3,0 - mtctr r3 - beqlr -1: bdnz 1b - blr - /* * This returns the high 64 bits of the product of two 64-bit numbers. */ diff --git a/arch/ppc64/kernel/nvram.c b/arch/powerpc/kernel/nvram_64.c index c0fcd29..c0fcd29 100644 --- a/arch/ppc64/kernel/nvram.c +++ b/arch/powerpc/kernel/nvram_64.c diff --git a/arch/powerpc/kernel/rtas-rtc.c b/arch/powerpc/kernel/rtas-rtc.c index 7b94866..635d3b9 100644 --- a/arch/powerpc/kernel/rtas-rtc.c +++ b/arch/powerpc/kernel/rtas-rtc.c @@ -15,7 +15,7 @@ unsigned long __init rtas_get_boot_time(void) { int ret[8]; int error, wait_time; - unsigned long max_wait_tb; + u64 max_wait_tb; max_wait_tb = get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT; do { @@ -45,7 +45,7 @@ void rtas_get_rtc_time(struct rtc_time *rtc_tm) { int ret[8]; int error, wait_time; - unsigned long max_wait_tb; + u64 max_wait_tb; max_wait_tb = get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT; do { @@ -80,7 +80,7 @@ void rtas_get_rtc_time(struct rtc_time *rtc_tm) int rtas_set_rtc_time(struct rtc_time *tm) { int error, wait_time; - unsigned long max_wait_tb; + u64 max_wait_tb; max_wait_tb = get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT; do { diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 070b4b4..de84797 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -130,6 +130,34 @@ unsigned long tb_last_stamp; */ DEFINE_PER_CPU(unsigned long, last_jiffy); +void __delay(unsigned long loops) +{ + unsigned long start; + int diff; + + if (__USE_RTC()) { + start = get_rtcl(); + do { + /* the RTCL register wraps at 1000000000 */ + diff = get_rtcl() - start; + if (diff < 0) + diff += 1000000000; + } while (diff < loops); + } else { + start = get_tbl(); + while (get_tbl() - start < loops) + HMT_low(); + HMT_medium(); + } +} +EXPORT_SYMBOL(__delay); + +void udelay(unsigned long usecs) +{ + __delay(tb_ticks_per_usec * usecs); +} +EXPORT_SYMBOL(udelay); + static __inline__ void timer_check_rtc(void) { /* diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c index 4099dda..dda5f2c 100644 --- a/arch/powerpc/platforms/chrp/setup.c +++ b/arch/powerpc/platforms/chrp/setup.c @@ -257,6 +257,13 @@ void __init chrp_setup_arch(void) if (rtas_token("display-character") >= 0) ppc_md.progress = rtas_progress; + /* use RTAS time-of-day routines if available */ + if (rtas_token("get-time-of-day") != RTAS_UNKNOWN_SERVICE) { + ppc_md.get_boot_time = rtas_get_boot_time; + ppc_md.get_rtc_time = rtas_get_rtc_time; + ppc_md.set_rtc_time = rtas_set_rtc_time; + } + #ifdef CONFIG_BOOTX_TEXT if (ppc_md.progress == NULL && boot_text_mapped) ppc_md.progress = btext_progress; @@ -505,9 +512,11 @@ void __init chrp_init(void) ppc_md.halt = rtas_halt; ppc_md.time_init = chrp_time_init; + ppc_md.calibrate_decr = chrp_calibrate_decr; + + /* this may get overridden with rtas routines later... */ ppc_md.set_rtc_time = chrp_set_rtc_time; ppc_md.get_rtc_time = chrp_get_rtc_time; - ppc_md.calibrate_decr = chrp_calibrate_decr; #ifdef CONFIG_SMP smp_ops = &chrp_smp_ops; diff --git a/arch/powerpc/platforms/chrp/smp.c b/arch/powerpc/platforms/chrp/smp.c index bb23159..b616053 100644 --- a/arch/powerpc/platforms/chrp/smp.c +++ b/arch/powerpc/platforms/chrp/smp.c @@ -34,6 +34,7 @@ #include <asm/machdep.h> #include <asm/smp.h> #include <asm/mpic.h> +#include <asm/rtas.h> static void __devinit smp_chrp_kick_cpu(int nr) { diff --git a/arch/powerpc/platforms/chrp/time.c b/arch/powerpc/platforms/chrp/time.c index 9e53535..737ee5d 100644 --- a/arch/powerpc/platforms/chrp/time.c +++ b/arch/powerpc/platforms/chrp/time.c @@ -87,7 +87,6 @@ int chrp_set_rtc_time(struct rtc_time *tmarg) chrp_cmos_clock_write((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT); - tm.tm_year -= 1900; if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { BIN_TO_BCD(tm.tm_sec); BIN_TO_BCD(tm.tm_min); @@ -156,7 +155,7 @@ void chrp_get_rtc_time(struct rtc_time *tm) BCD_TO_BIN(mon); BCD_TO_BIN(year); } - if ((year += 1900) < 1970) + if (year < 70) year += 100; tm->tm_sec = sec; tm->tm_min = min; diff --git a/arch/powerpc/platforms/maple/time.c b/arch/powerpc/platforms/maple/time.c index 40fc07a..15846cc 100644 --- a/arch/powerpc/platforms/maple/time.c +++ b/arch/powerpc/platforms/maple/time.c @@ -158,6 +158,11 @@ int maple_set_rtc_time(struct rtc_time *tm) return 0; } +static struct resource rtc_iores = { + .name = "rtc", + .flags = IORESOURCE_BUSY, +}; + unsigned long __init maple_get_boot_time(void) { struct rtc_time tm; @@ -172,7 +177,11 @@ unsigned long __init maple_get_boot_time(void) printk(KERN_INFO "Maple: No device node for RTC, assuming " "legacy address (0x%x)\n", maple_rtc_addr); } - + + rtc_iores.start = maple_rtc_addr; + rtc_iores.end = maple_rtc_addr + 7; + request_resource(&ioport_resource, &rtc_iores); + maple_get_rtc_time(&tm); return mktime(tm.tm_year+1900, tm.tm_mon+1, tm.tm_mday, tm.tm_hour, tm.tm_min, tm.tm_sec); diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c index 79de231..c8d2a40 100644 --- a/arch/powerpc/platforms/pseries/eeh.c +++ b/arch/powerpc/platforms/pseries/eeh.c @@ -86,7 +86,8 @@ static int ibm_read_slot_reset_state; static int ibm_read_slot_reset_state2; static int ibm_slot_error_detail; -static int eeh_subsystem_enabled; +int eeh_subsystem_enabled; +EXPORT_SYMBOL(eeh_subsystem_enabled); /* Lock to avoid races due to multiple reports of an error */ static DEFINE_SPINLOCK(confirm_error_lock); diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index b9d9732b..4a465f0 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -504,7 +504,7 @@ static void pseries_dedicated_idle(void) lpaca->lppaca.idle = 1; if (!need_resched()) { - start_snooze = __get_tb() + + start_snooze = get_tb() + *smt_snooze_delay * tb_ticks_per_usec; while (!need_resched() && !cpu_is_offline(cpu)) { @@ -518,7 +518,7 @@ static void pseries_dedicated_idle(void) HMT_very_low(); if (*smt_snooze_delay != 0 && - __get_tb() > start_snooze) { + get_tb() > start_snooze) { HMT_medium(); dedicated_idle_sleep(cpu); } diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile index 17a4da6..0bb23fc 100644 --- a/arch/ppc/kernel/Makefile +++ b/arch/ppc/kernel/Makefile @@ -13,7 +13,7 @@ extra-$(CONFIG_POWER4) += idle_power4.o extra-y += vmlinux.lds obj-y := entry.o traps.o idle.o time.o misc.o \ - process.o align.o \ + process.o \ setup.o \ ppc_htab.o obj-$(CONFIG_6xx) += l2cr.o cpu_setup_6xx.o @@ -38,7 +38,7 @@ endif # These are here while we do the architecture merge else -obj-y := idle.o align.o +obj-y := idle.o obj-$(CONFIG_6xx) += l2cr.o cpu_setup_6xx.o obj-$(CONFIG_SOFTWARE_SUSPEND) += swsusp.o obj-$(CONFIG_MODULES) += module.o diff --git a/arch/ppc/kernel/align.c b/arch/ppc/kernel/align.c deleted file mode 100644 index ab398c4..0000000 --- a/arch/ppc/kernel/align.c +++ /dev/null @@ -1,410 +0,0 @@ -/* - * align.c - handle alignment exceptions for the Power PC. - * - * Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au> - * Copyright (c) 1998-1999 TiVo, Inc. - * PowerPC 403GCX modifications. - * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu> - * PowerPC 403GCX/405GP modifications. - */ -#include <linux/config.h> -#include <linux/kernel.h> -#include <linux/mm.h> -#include <asm/ptrace.h> -#include <asm/processor.h> -#include <asm/uaccess.h> -#include <asm/system.h> -#include <asm/cache.h> - -struct aligninfo { - unsigned char len; - unsigned char flags; -}; - -#if defined(CONFIG_4xx) || defined(CONFIG_POWER4) || defined(CONFIG_BOOKE) -#define OPCD(inst) (((inst) & 0xFC000000) >> 26) -#define RS(inst) (((inst) & 0x03E00000) >> 21) -#define RA(inst) (((inst) & 0x001F0000) >> 16) -#define IS_XFORM(code) ((code) == 31) -#endif - -#define INVALID { 0, 0 } - -#define LD 1 /* load */ -#define ST 2 /* store */ -#define SE 4 /* sign-extend value */ -#define F 8 /* to/from fp regs */ -#define U 0x10 /* update index register */ -#define M 0x20 /* multiple load/store */ -#define S 0x40 /* single-precision fp, or byte-swap value */ -#define SX 0x40 /* byte count in XER */ -#define HARD 0x80 /* string, stwcx. */ - -#define DCBZ 0x5f /* 8xx/82xx dcbz faults when cache not enabled */ - -/* - * The PowerPC stores certain bits of the instruction that caused the - * alignment exception in the DSISR register. This array maps those - * bits to information about the operand length and what the - * instruction would do. - */ -static struct aligninfo aligninfo[128] = { - { 4, LD }, /* 00 0 0000: lwz / lwarx */ - INVALID, /* 00 0 0001 */ - { 4, ST }, /* 00 0 0010: stw */ - INVALID, /* 00 0 0011 */ - { 2, LD }, /* 00 0 0100: lhz */ - { 2, LD+SE }, /* 00 0 0101: lha */ - { 2, ST }, /* 00 0 0110: sth */ - { 4, LD+M }, /* 00 0 0111: lmw */ - { 4, LD+F+S }, /* 00 0 1000: lfs */ - { 8, LD+F }, /* 00 0 1001: lfd */ - { 4, ST+F+S }, /* 00 0 1010: stfs */ - { 8, ST+F }, /* 00 0 1011: stfd */ - INVALID, /* 00 0 1100 */ - INVALID, /* 00 0 1101: ld/ldu/lwa */ - INVALID, /* 00 0 1110 */ - INVALID, /* 00 0 1111: std/stdu */ - { 4, LD+U }, /* 00 1 0000: lwzu */ - INVALID, /* 00 1 0001 */ - { 4, ST+U }, /* 00 1 0010: stwu */ - INVALID, /* 00 1 0011 */ - { 2, LD+U }, /* 00 1 0100: lhzu */ - { 2, LD+SE+U }, /* 00 1 0101: lhau */ - { 2, ST+U }, /* 00 1 0110: sthu */ - { 4, ST+M }, /* 00 1 0111: stmw */ - { 4, LD+F+S+U }, /* 00 1 1000: lfsu */ - { 8, LD+F+U }, /* 00 1 1001: lfdu */ - { 4, ST+F+S+U }, /* 00 1 1010: stfsu */ - { 8, ST+F+U }, /* 00 1 1011: stfdu */ - INVALID, /* 00 1 1100 */ - INVALID, /* 00 1 1101 */ - INVALID, /* 00 1 1110 */ - INVALID, /* 00 1 1111 */ - INVALID, /* 01 0 0000: ldx */ - INVALID, /* 01 0 0001 */ - INVALID, /* 01 0 0010: stdx */ - INVALID, /* 01 0 0011 */ - INVALID, /* 01 0 0100 */ - INVALID, /* 01 0 0101: lwax */ - INVALID, /* 01 0 0110 */ - INVALID, /* 01 0 0111 */ - { 4, LD+M+HARD+SX }, /* 01 0 1000: lswx */ - { 4, LD+M+HARD }, /* 01 0 1001: lswi */ - { 4, ST+M+HARD+SX }, /* 01 0 1010: stswx */ - { 4, ST+M+HARD }, /* 01 0 1011: stswi */ - INVALID, /* 01 0 1100 */ - INVALID, /* 01 0 1101 */ - INVALID, /* 01 0 1110 */ - INVALID, /* 01 0 1111 */ - INVALID, /* 01 1 0000: ldux */ - INVALID, /* 01 1 0001 */ - INVALID, /* 01 1 0010: stdux */ - INVALID, /* 01 1 0011 */ - INVALID, /* 01 1 0100 */ - INVALID, /* 01 1 0101: lwaux */ - INVALID, /* 01 1 0110 */ - INVALID, /* 01 1 0111 */ - INVALID, /* 01 1 1000 */ - INVALID, /* 01 1 1001 */ - INVALID, /* 01 1 1010 */ - INVALID, /* 01 1 1011 */ - INVALID, /* 01 1 1100 */ - INVALID, /* 01 1 1101 */ - INVALID, /* 01 1 1110 */ - INVALID, /* 01 1 1111 */ - INVALID, /* 10 0 0000 */ - INVALID, /* 10 0 0001 */ - { 0, ST+HARD }, /* 10 0 0010: stwcx. */ - INVALID, /* 10 0 0011 */ - INVALID, /* 10 0 0100 */ - INVALID, /* 10 0 0101 */ - INVALID, /* 10 0 0110 */ - INVALID, /* 10 0 0111 */ - { 4, LD+S }, /* 10 0 1000: lwbrx */ - INVALID, /* 10 0 1001 */ - { 4, ST+S }, /* 10 0 1010: stwbrx */ - INVALID, /* 10 0 1011 */ - { 2, LD+S }, /* 10 0 1100: lhbrx */ - INVALID, /* 10 0 1101 */ - { 2, ST+S }, /* 10 0 1110: sthbrx */ - INVALID, /* 10 0 1111 */ - INVALID, /* 10 1 0000 */ - INVALID, /* 10 1 0001 */ - INVALID, /* 10 1 0010 */ - INVALID, /* 10 1 0011 */ - INVALID, /* 10 1 0100 */ - INVALID, /* 10 1 0101 */ - INVALID, /* 10 1 0110 */ - INVALID, /* 10 1 0111 */ - INVALID, /* 10 1 1000 */ - INVALID, /* 10 1 1001 */ - INVALID, /* 10 1 1010 */ - INVALID, /* 10 1 1011 */ - INVALID, /* 10 1 1100 */ - INVALID, /* 10 1 1101 */ - INVALID, /* 10 1 1110 */ - { 0, ST+HARD }, /* 10 1 1111: dcbz */ - { 4, LD }, /* 11 0 0000: lwzx */ - INVALID, /* 11 0 0001 */ - { 4, ST }, /* 11 0 0010: stwx */ - INVALID, /* 11 0 0011 */ - { 2, LD }, /* 11 0 0100: lhzx */ - { 2, LD+SE }, /* 11 0 0101: lhax */ - { 2, ST }, /* 11 0 0110: sthx */ - INVALID, /* 11 0 0111 */ - { 4, LD+F+S }, /* 11 0 1000: lfsx */ - { 8, LD+F }, /* 11 0 1001: lfdx */ - { 4, ST+F+S }, /* 11 0 1010: stfsx */ - { 8, ST+F }, /* 11 0 1011: stfdx */ - INVALID, /* 11 0 1100 */ - INVALID, /* 11 0 1101: lmd */ - INVALID, /* 11 0 1110 */ - INVALID, /* 11 0 1111: stmd */ - { 4, LD+U }, /* 11 1 0000: lwzux */ - INVALID, /* 11 1 0001 */ - { 4, ST+U }, /* 11 1 0010: stwux */ - INVALID, /* 11 1 0011 */ - { 2, LD+U }, /* 11 1 0100: lhzux */ - { 2, LD+SE+U }, /* 11 1 0101: lhaux */ - { 2, ST+U }, /* 11 1 0110: sthux */ - INVALID, /* 11 1 0111 */ - { 4, LD+F+S+U }, /* 11 1 1000: lfsux */ - { 8, LD+F+U }, /* 11 1 1001: lfdux */ - { 4, ST+F+S+U }, /* 11 1 1010: stfsux */ - { 8, ST+F+U }, /* 11 1 1011: stfdux */ - INVALID, /* 11 1 1100 */ - INVALID, /* 11 1 1101 */ - INVALID, /* 11 1 1110 */ - INVALID, /* 11 1 1111 */ -}; - -#define SWAP(a, b) (t = (a), (a) = (b), (b) = t) - -int -fix_alignment(struct pt_regs *regs) -{ - int instr, nb, flags; -#if defined(CONFIG_4xx) || defined(CONFIG_POWER4) || defined(CONFIG_BOOKE) - int opcode, f1, f2, f3; -#endif - int i, t; - int reg, areg; - int offset, nb0; - unsigned char __user *addr; - unsigned char *rptr; - union { - long l; - float f; - double d; - unsigned char v[8]; - } data; - - CHECK_FULL_REGS(regs); - -#if defined(CONFIG_4xx) || defined(CONFIG_POWER4) || defined(CONFIG_BOOKE) - /* The 4xx-family & Book-E processors have no DSISR register, - * so we emulate it. - * The POWER4 has a DSISR register but doesn't set it on - * an alignment fault. -- paulus - */ - - if (__get_user(instr, (unsigned int __user *) regs->nip)) - return 0; - opcode = OPCD(instr); - reg = RS(instr); - areg = RA(instr); - - if (!IS_XFORM(opcode)) { - f1 = 0; - f2 = (instr & 0x04000000) >> 26; - f3 = (instr & 0x78000000) >> 27; - } else { - f1 = (instr & 0x00000006) >> 1; - f2 = (instr & 0x00000040) >> 6; - f3 = (instr & 0x00000780) >> 7; - } - - instr = ((f1 << 5) | (f2 << 4) | f3); -#else - reg = (regs->dsisr >> 5) & 0x1f; /* source/dest register */ - areg = regs->dsisr & 0x1f; /* register to update */ - instr = (regs->dsisr >> 10) & 0x7f; -#endif - - nb = aligninfo[instr].len; - if (nb == 0) { - long __user *p; - int i; - - if (instr != DCBZ) - return 0; /* too hard or invalid instruction */ - /* - * The dcbz (data cache block zero) instruction - * gives an alignment fault if used on non-cacheable - * memory. We handle the fault mainly for the - * case when we are running with the cache disabled - * for debugging. - */ - p = (long __user *) (regs->dar & -L1_CACHE_BYTES); - if (user_mode(regs) - && !access_ok(VERIFY_WRITE, p, L1_CACHE_BYTES)) - return -EFAULT; - for (i = 0; i < L1_CACHE_BYTES / sizeof(long); ++i) - if (__put_user(0, p+i)) - return -EFAULT; - return 1; - } - - flags = aligninfo[instr].flags; - if ((flags & (LD|ST)) == 0) - return 0; - - /* For the 4xx-family & Book-E processors, the 'dar' field of the - * pt_regs structure is overloaded and is really from the DEAR. - */ - - addr = (unsigned char __user *)regs->dar; - - if (flags & M) { - /* lmw, stmw, lswi/x, stswi/x */ - nb0 = 0; - if (flags & HARD) { - if (flags & SX) { - nb = regs->xer & 127; - if (nb == 0) - return 1; - } else { - if (__get_user(instr, - (unsigned int __user *)regs->nip)) - return 0; - nb = (instr >> 11) & 0x1f; - if (nb == 0) - nb = 32; - } - if (nb + reg * 4 > 128) { - nb0 = nb + reg * 4 - 128; - nb = 128 - reg * 4; - } - } else { - /* lwm, stmw */ - nb = (32 - reg) * 4; - } - - if (!access_ok((flags & ST? VERIFY_WRITE: VERIFY_READ), addr, nb+nb0)) - return -EFAULT; /* bad address */ - - rptr = (unsigned char *) ®s->gpr[reg]; - if (flags & LD) { - for (i = 0; i < nb; ++i) - if (__get_user(rptr[i], addr+i)) - return -EFAULT; - if (nb0 > 0) { - rptr = (unsigned char *) ®s->gpr[0]; - addr += nb; - for (i = 0; i < nb0; ++i) - if (__get_user(rptr[i], addr+i)) - return -EFAULT; - } - for (; (i & 3) != 0; ++i) - rptr[i] = 0; - } else { - for (i = 0; i < nb; ++i) - if (__put_user(rptr[i], addr+i)) - return -EFAULT; - if (nb0 > 0) { - rptr = (unsigned char *) ®s->gpr[0]; - addr += nb; - for (i = 0; i < nb0; ++i) - if (__put_user(rptr[i], addr+i)) - return -EFAULT; - } - } - return 1; - } - - offset = 0; - if (nb < 4) { - /* read/write the least significant bits */ - data.l = 0; - offset = 4 - nb; - } - - /* Verify the address of the operand */ - if (user_mode(regs)) { - if (!access_ok((flags & ST? VERIFY_WRITE: VERIFY_READ), addr, nb)) - return -EFAULT; /* bad address */ - } - - if (flags & F) { - preempt_disable(); - if (regs->msr & MSR_FP) - giveup_fpu(current); - preempt_enable(); - } - - /* If we read the operand, copy it in, else get register values */ - if (flags & LD) { - for (i = 0; i < nb; ++i) - if (__get_user(data.v[offset+i], addr+i)) - return -EFAULT; - } else if (flags & F) { - data.d = current->thread.fpr[reg]; - } else { - data.l = regs->gpr[reg]; - } - - switch (flags & ~U) { - case LD+SE: /* sign extend */ - if (data.v[2] >= 0x80) - data.v[0] = data.v[1] = -1; - break; - - case LD+S: /* byte-swap */ - case ST+S: - if (nb == 2) { - SWAP(data.v[2], data.v[3]); - } else { - SWAP(data.v[0], data.v[3]); - SWAP(data.v[1], data.v[2]); - } - break; - - /* Single-precision FP load and store require conversions... */ - case LD+F+S: -#ifdef CONFIG_PPC_FPU - preempt_disable(); - enable_kernel_fp(); - cvt_fd(&data.f, &data.d, ¤t->thread); - preempt_enable(); -#else - return 0; -#endif - break; - case ST+F+S: -#ifdef CONFIG_PPC_FPU - preempt_disable(); - enable_kernel_fp(); - cvt_df(&data.d, &data.f, ¤t->thread); - preempt_enable(); -#else - return 0; -#endif - break; - } - - if (flags & ST) { - for (i = 0; i < nb; ++i) - if (__put_user(data.v[offset+i], addr+i)) - return -EFAULT; - } else if (flags & F) { - current->thread.fpr[reg] = data.d; - } else { - regs->gpr[reg] = data.l; - } - - if (flags & U) - regs->gpr[areg] = regs->dar; - - return 1; -} diff --git a/arch/ppc/kernel/pci.c b/arch/ppc/kernel/pci.c index 48ed58f..f7fae5f 100644 --- a/arch/ppc/kernel/pci.c +++ b/arch/ppc/kernel/pci.c @@ -45,7 +45,6 @@ static void update_bridge_base(struct pci_bus *bus, int i); static void pcibios_fixup_resources(struct pci_dev* dev); static void fixup_broken_pcnet32(struct pci_dev* dev); static int reparent_resources(struct resource *parent, struct resource *res); -static void fixup_rev1_53c810(struct pci_dev* dev); static void fixup_cpc710_pci64(struct pci_dev* dev); #ifdef CONFIG_PPC_OF static u8* pci_to_OF_bus_map; diff --git a/arch/ppc/syslib/mpc83xx_sys.c b/arch/ppc/syslib/mpc83xx_sys.c index a152398..82cf3ab 100644 --- a/arch/ppc/syslib/mpc83xx_sys.c +++ b/arch/ppc/syslib/mpc83xx_sys.c @@ -69,9 +69,33 @@ struct ppc_sys_spec ppc_sys_specs[] = { }, }, { - .ppc_sys_name = "8343E", + .ppc_sys_name = "8347E", .mask = 0xFFFF0000, .value = 0x80540000, + .num_devices = 9, + .device_list = (enum ppc_sys_devices[]) + { + MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1, + MPC83xx_IIC2, MPC83xx_DUART, MPC83xx_SEC2, + MPC83xx_USB2_DR, MPC83xx_USB2_MPH, MPC83xx_MDIO + }, + }, + { + .ppc_sys_name = "8347", + .mask = 0xFFFF0000, + .value = 0x80550000, + .num_devices = 8, + .device_list = (enum ppc_sys_devices[]) + { + MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1, + MPC83xx_IIC2, MPC83xx_DUART, + MPC83xx_USB2_DR, MPC83xx_USB2_MPH, MPC83xx_MDIO + }, + }, + { + .ppc_sys_name = "8343E", + .mask = 0xFFFF0000, + .value = 0x80560000, .num_devices = 8, .device_list = (enum ppc_sys_devices[]) { @@ -83,7 +107,7 @@ struct ppc_sys_spec ppc_sys_specs[] = { { .ppc_sys_name = "8343", .mask = 0xFFFF0000, - .value = 0x80550000, + .value = 0x80570000, .num_devices = 7, .device_list = (enum ppc_sys_devices[]) { diff --git a/arch/ppc64/Kconfig.debug b/arch/ppc64/Kconfig.debug deleted file mode 100644 index b258c93..0000000 --- a/arch/ppc64/Kconfig.debug +++ /dev/null @@ -1,65 +0,0 @@ -menu "Kernel hacking" - -source "lib/Kconfig.debug" - -config DEBUG_STACKOVERFLOW - bool "Check for stack overflows" - depends on DEBUG_KERNEL - help - This option will cause messages to be printed if free stack space - drops below a certain limit. - -config KPROBES - bool "Kprobes" - depends on DEBUG_KERNEL - help - Kprobes allows you to trap at almost any kernel address and - execute a callback function. register_kprobe() establishes - a probepoint and specifies the callback. Kprobes is useful - for kernel debugging, non-intrusive instrumentation and testing. - If in doubt, say "N". - -config DEBUG_STACK_USAGE - bool "Stack utilization instrumentation" - depends on DEBUG_KERNEL - help - Enables the display of the minimum amount of free stack which each - task has ever had available in the sysrq-T and sysrq-P debug output. - - This option will slow down process creation somewhat. - -config DEBUGGER - bool "Enable debugger hooks" - depends on DEBUG_KERNEL - help - Include in-kernel hooks for kernel debuggers. Unless you are - intending to debug the kernel, say N here. - -config XMON - bool "Include xmon kernel debugger" - depends on DEBUGGER && !PPC_ISERIES - help - Include in-kernel hooks for the xmon kernel monitor/debugger. - Unless you are intending to debug the kernel, say N here. - Make sure to enable also CONFIG_BOOTX_TEXT on Macs. Otherwise - nothing will appear on the screen (xmon writes directly to the - framebuffer memory). - The cmdline option 'xmon' or 'xmon=early' will drop into xmon very - early during boot. 'xmon=on' will just enable the xmon debugger hooks. - 'xmon=off' will disable the debugger hooks if CONFIG_XMON_DEFAULT is set. - -config XMON_DEFAULT - bool "Enable xmon by default" - depends on XMON - help - xmon is normally disabled unless booted with 'xmon=on'. - Use 'xmon=off' to disable xmon init during runtime. - -config IRQSTACKS - bool "Use separate kernel stacks when processing interrupts" - help - If you say Y here the kernel will use separate kernel stacks - for handling hard and soft interrupts. This can help avoid - overflowing the process kernel stacks. - -endmenu diff --git a/arch/ppc64/Makefile b/arch/ppc64/Makefile deleted file mode 100644 index a55a82d..0000000 --- a/arch/ppc64/Makefile +++ /dev/null @@ -1,142 +0,0 @@ -# This file is included by the global makefile so that you can add your own -# architecture-specific flags and dependencies. Remember to do have actions -# for "archclean" and "archdep" for cleaning up and making dependencies for -# this architecture -# -# This file is subject to the terms and conditions of the GNU General Public -# License. See the file "COPYING" in the main directory of this archive -# for more details. -# -# Copyright (C) 1994 by Linus Torvalds -# Changes for PPC by Gary Thomas -# Rewritten by Cort Dougan and Paul Mackerras -# Adjusted for PPC64 by Tom Gall -# - -KERNELLOAD := 0xc000000000000000 - -# Set default 32 bits cross compilers for vdso and boot wrapper -CROSS32_COMPILE ?= - -CROSS32CC := $(CROSS32_COMPILE)gcc -CROSS32AS := $(CROSS32_COMPILE)as -CROSS32LD := $(CROSS32_COMPILE)ld -CROSS32OBJCOPY := $(CROSS32_COMPILE)objcopy - -# If we have a biarch compiler, use it for 32 bits cross compile if -# CROSS32_COMPILE wasn't explicitely defined, and add proper explicit -# target type to target compilers - -HAS_BIARCH := $(call cc-option-yn, -m64) -ifeq ($(HAS_BIARCH),y) -ifeq ($(CROSS32_COMPILE),) -CROSS32CC := $(CC) -m32 -CROSS32AS := $(AS) -a32 -CROSS32LD := $(LD) -m elf32ppc -CROSS32OBJCOPY := $(OBJCOPY) -endif -override AS += -a64 -override LD += -m elf64ppc -override CC += -m64 -endif - -export CROSS32CC CROSS32AS CROSS32LD CROSS32OBJCOPY - -new_nm := $(shell if $(NM) --help 2>&1 | grep -- '--synthetic' > /dev/null; then echo y; else echo n; fi) - -ifeq ($(new_nm),y) -NM := $(NM) --synthetic - -endif - -CHECKFLAGS += -m64 -D__powerpc__ -D__powerpc64__ - -LDFLAGS := -m elf64ppc -LDFLAGS_vmlinux := -Bstatic -e $(KERNELLOAD) -Ttext $(KERNELLOAD) -CFLAGS += -msoft-float -pipe -mminimal-toc -mtraceback=none \ - -mcall-aixdesc -# Temporary hack until we have migrated to asm-powerpc -CPPFLAGS += -Iarch/$(ARCH)/include - -GCC_VERSION := $(call cc-version) -GCC_BROKEN_VEC := $(shell if [ $(GCC_VERSION) -lt 0400 ] ; then echo "y"; fi ;) - -ifeq ($(CONFIG_POWER4_ONLY),y) -ifeq ($(CONFIG_ALTIVEC),y) -ifeq ($(GCC_BROKEN_VEC),y) - CFLAGS += $(call cc-option,-mcpu=970) -else - CFLAGS += $(call cc-option,-mcpu=power4) -endif -else - CFLAGS += $(call cc-option,-mcpu=power4) -endif -else - CFLAGS += $(call cc-option,-mtune=power4) -endif - -# No AltiVec instruction when building kernel -CFLAGS += $(call cc-option, -mno-altivec) - -# Enable unit-at-a-time mode when possible. It shrinks the -# kernel considerably. -CFLAGS += $(call cc-option,-funit-at-a-time) - -head-y := arch/ppc64/kernel/head.o -head-y += arch/powerpc/kernel/fpu.o -head-y += arch/powerpc/kernel/entry_64.o - -core-y += arch/ppc64/kernel/ arch/powerpc/kernel/ -core-y += arch/powerpc/mm/ -core-y += arch/powerpc/sysdev/ -core-y += arch/powerpc/platforms/ -core-y += arch/powerpc/lib/ -core-$(CONFIG_XMON) += arch/powerpc/xmon/ -drivers-$(CONFIG_OPROFILE) += arch/powerpc/oprofile/ - -boot := arch/ppc64/boot - -boottargets-$(CONFIG_PPC_PSERIES) += zImage zImage.initrd -boottargets-$(CONFIG_PPC_PMAC) += zImage.vmode zImage.initrd.vmode -boottargets-$(CONFIG_PPC_MAPLE) += zImage zImage.initrd -boottargets-$(CONFIG_PPC_ISERIES) += vmlinux.sminitrd vmlinux.initrd vmlinux.sm -boottargets-$(CONFIG_PPC_BPA) += zImage zImage.initrd -$(boottargets-y): vmlinux - $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ - -bootimage-$(CONFIG_PPC_PSERIES) := $(boot)/zImage -bootimage-$(CONFIG_PPC_PMAC) := vmlinux -bootimage-$(CONFIG_PPC_MAPLE) := $(boot)/zImage -bootimage-$(CONFIG_PPC_BPA) := $(boot)/zImage -bootimage-$(CONFIG_PPC_ISERIES) := vmlinux -BOOTIMAGE := $(bootimage-y) -install: vmlinux - $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(BOOTIMAGE) $@ - -defaultimage-$(CONFIG_PPC_PSERIES) := zImage -defaultimage-$(CONFIG_PPC_PMAC) := zImage.vmode -defaultimage-$(CONFIG_PPC_MAPLE) := zImage -defaultimage-$(CONFIG_PPC_ISERIES) := vmlinux -KBUILD_IMAGE := $(defaultimage-y) -all: $(KBUILD_IMAGE) - -archclean: - $(Q)$(MAKE) $(clean)=$(boot) - # Temporary hack until we have migrated to asm-powerpc - $(Q)rm -rf arch/$(ARCH)/include - - -# Temporary hack until we have migrated to asm-powerpc -include/asm: arch/$(ARCH)/include/asm -arch/$(ARCH)/include/asm: - $(Q)if [ ! -d arch/$(ARCH)/include ]; then mkdir -p arch/$(ARCH)/include; fi - $(Q)ln -fsn $(srctree)/include/asm-powerpc arch/$(ARCH)/include/asm - -define archhelp - echo ' zImage.vmode - Compressed kernel image (arch/$(ARCH)/boot/zImage.vmode)' - echo ' zImage.initrd.vmode - Compressed kernel image with initrd attached,' - echo ' sourced from arch/$(ARCH)/boot/ramdisk.image.gz' - echo ' (arch/$(ARCH)/boot/zImage.initrd.vmode)' - echo ' zImage - zImage for pSeries machines' - echo ' zImage.initrd - zImage with initrd for pSeries machines' -endef diff --git a/arch/ppc64/configs/bpa_defconfig b/arch/ppc64/configs/bpa_defconfig deleted file mode 100644 index 67ffecb..0000000 --- a/arch/ppc64/configs/bpa_defconfig +++ /dev/null @@ -1,1024 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc4 -# Thu Oct 20 08:29:10 2005 -# -CONFIG_64BIT=y -CONFIG_MMU=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_EARLY_PRINTK=y -CONFIG_COMPAT=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_FORCE_MAX_ZONEORDER=13 - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -# CONFIG_CPUSETS is not set -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_EMBEDDED is not set -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set -CONFIG_STOP_MACHINE=y -CONFIG_SYSVIPC_COMPAT=y - -# -# Platform support -# -# CONFIG_PPC_ISERIES is not set -CONFIG_PPC_MULTIPLATFORM=y -# CONFIG_PPC_PSERIES is not set -CONFIG_PPC_BPA=y -# CONFIG_PPC_PMAC is not set -# CONFIG_PPC_MAPLE is not set -CONFIG_PPC=y -CONFIG_PPC64=y -CONFIG_PPC_OF=y -CONFIG_BPA_IIC=y -CONFIG_ALTIVEC=y -CONFIG_KEXEC=y -# CONFIG_U3_DART is not set -# CONFIG_BOOTX_TEXT is not set -# CONFIG_POWER4_ONLY is not set -# CONFIG_IOMMU_VMERGE is not set -CONFIG_SMP=y -CONFIG_NR_CPUS=4 -CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_NUMA is not set -CONFIG_SCHED_SMT=y -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_PREEMPT_BKL=y -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_GENERIC_HARDIRQS=y -CONFIG_PPC_RTAS=y -CONFIG_RTAS_PROC=y -CONFIG_RTAS_FLASH=y -CONFIG_SECCOMP=y -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_PROC_DEVICETREE=y -# CONFIG_CMDLINE_BOOL is not set -CONFIG_ISA_DMA_API=y - -# -# Bus Options -# -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_LEGACY_PROC=y -# CONFIG_PCI_DEBUG is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set -CONFIG_NET_IPIP=y -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=y -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -CONFIG_IPV6=y -# CONFIG_IPV6_PRIVACY is not set -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -CONFIG_INET6_TUNNEL=m -CONFIG_IPV6_TUNNEL=m -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -# CONFIG_NETFILTER_NETLINK is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=y -# CONFIG_IP_NF_CT_ACCT is not set -# CONFIG_IP_NF_CONNTRACK_MARK is not set -# CONFIG_IP_NF_CONNTRACK_EVENTS is not set -CONFIG_IP_NF_CT_PROTO_SCTP=y -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -# CONFIG_IP_NF_NETBIOS_NS is not set -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -# CONFIG_IP_NF_PPTP is not set -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -CONFIG_IP_NF_MATCH_SCTP=m -# CONFIG_IP_NF_MATCH_DCCP is not set -CONFIG_IP_NF_MATCH_COMMENT=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_MATCH_STRING=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_TARGET_NFQUEUE=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m - -# -# IPv6: Netfilter Configuration (EXPERIMENTAL) -# -# CONFIG_IP6_NF_QUEUE is not set -# CONFIG_IP6_NF_IPTABLES is not set -# CONFIG_IP6_NF_TARGET_NFQUEUE is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set -CONFIG_NET_CLS_ROUTE=y - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -# CONFIG_DEBUG_DRIVER is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_NBD=y -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=131072 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -CONFIG_IDEDISK_MULTI_MODE=y -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -# CONFIG_BLK_DEV_OFFBOARD is not set -CONFIG_BLK_DEV_GENERIC=y -# CONFIG_BLK_DEV_OPTI621 is not set -# CONFIG_BLK_DEV_SL82C105 is not set -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -CONFIG_BLK_DEV_AEC62XX=y -# CONFIG_BLK_DEV_ALI15X3 is not set -# CONFIG_BLK_DEV_AMD74XX is not set -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_SC1200 is not set -# CONFIG_BLK_DEV_PIIX is not set -# CONFIG_BLK_DEV_IT821X is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -# CONFIG_BLK_DEV_PDC202XX_NEW is not set -# CONFIG_BLK_DEV_SVWKS is not set -CONFIG_BLK_DEV_SIIMAGE=y -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -# CONFIG_BLK_DEV_VIA82CXXX is not set -# CONFIG_IDE_ARM is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -# CONFIG_NET_PCI is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -CONFIG_E1000=m -# CONFIG_E1000_NAPI is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -CONFIG_SKGE=m -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -# CONFIG_SPIDER_NET is not set -# CONFIG_MV643XX_ETH is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_PCIPS2 is not set -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -CONFIG_SERIAL_NONSTANDARD=y -# CONFIG_ROCKETPORT is not set -# CONFIG_CYCLADES is not set -# CONFIG_DIGIEPCA is not set -# CONFIG_MOXA_SMARTIO is not set -# CONFIG_ISI is not set -# CONFIG_SYNCLINK is not set -# CONFIG_SYNCLINKMP is not set -# CONFIG_N_HDLC is not set -# CONFIG_SPECIALIX is not set -# CONFIG_SX is not set -# CONFIG_STALDRV is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_WATCHDOG_RTAS=y - -# -# PCI-based Watchdog Cards -# -# CONFIG_PCIPCWATCHDOG is not set -# CONFIG_WDTPCI is not set -# CONFIG_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_HANGCHECK_TIMER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -CONFIG_I2C=y -# CONFIG_I2C_CHARDEV is not set - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=y -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set - -# -# Misc devices -# - -# -# Multimedia Capabilities Port drivers -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# SN Devices -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -# CONFIG_ZISOFS is not set -CONFIG_UDF_FS=m -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -CONFIG_HUGETLBFS=y -CONFIG_HUGETLB_PAGE=y -CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=m -CONFIG_NFSD_V2_ACL=y -CONFIG_NFSD_V3=y -CONFIG_NFSD_V3_ACL=y -# CONFIG_NFSD_V4 is not set -CONFIG_NFSD_TCP=y -CONFIG_LOCKD=m -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=m -CONFIG_NFS_ACL_SUPPORT=m -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=m -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -CONFIG_EFI_PARTITION=y - -# -# Native Language Support -# -CONFIG_NLS=m -CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_LOG_BUF_SHIFT=15 -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_SPINLOCK is not set -CONFIG_DEBUG_SPINLOCK_SLEEP=y -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_INFO is not set -CONFIG_DEBUG_FS=y -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_KPROBES is not set -# CONFIG_DEBUG_STACK_USAGE is not set -CONFIG_DEBUGGER=y -# CONFIG_XMON is not set -# CONFIG_PPCDBG is not set -CONFIG_IRQSTACKS=y - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_HMAC=y -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=m -CONFIG_CRYPTO_SHA1=m -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set -# CONFIG_CRYPTO_TGR192 is not set -CONFIG_CRYPTO_DES=m -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -CONFIG_CRYPTO_DEFLATE=m -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=m -CONFIG_ZLIB_DEFLATE=m -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/ppc64/configs/g5_defconfig b/arch/ppc64/configs/g5_defconfig deleted file mode 100644 index 6323065..0000000 --- a/arch/ppc64/configs/g5_defconfig +++ /dev/null @@ -1,1392 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc4 -# Thu Oct 20 08:30:23 2005 -# -CONFIG_64BIT=y -CONFIG_MMU=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_EARLY_PRINTK=y -CONFIG_COMPAT=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_FORCE_MAX_ZONEORDER=13 - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -# CONFIG_CPUSETS is not set -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_EMBEDDED is not set -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_KMOD=y -CONFIG_STOP_MACHINE=y -CONFIG_SYSVIPC_COMPAT=y - -# -# Platform support -# -# CONFIG_PPC_ISERIES is not set -CONFIG_PPC_MULTIPLATFORM=y -# CONFIG_PPC_PSERIES is not set -# CONFIG_PPC_BPA is not set -CONFIG_PPC_PMAC=y -# CONFIG_PPC_MAPLE is not set -CONFIG_PPC=y -CONFIG_PPC64=y -CONFIG_PPC_OF=y -CONFIG_MPIC=y -CONFIG_ALTIVEC=y -CONFIG_KEXEC=y -CONFIG_U3_DART=y -CONFIG_PPC_PMAC64=y -CONFIG_BOOTX_TEXT=y -CONFIG_POWER4_ONLY=y -CONFIG_IOMMU_VMERGE=y -CONFIG_SMP=y -CONFIG_NR_CPUS=2 -CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_NUMA is not set -# CONFIG_SCHED_SMT is not set -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -# CONFIG_PREEMPT_BKL is not set -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_GENERIC_HARDIRQS=y -CONFIG_SECCOMP=y -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -# CONFIG_HOTPLUG_CPU is not set -CONFIG_PROC_DEVICETREE=y -# CONFIG_CMDLINE_BOOL is not set -CONFIG_ISA_DMA_API=y - -# -# Bus Options -# -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_LEGACY_PROC=y -# CONFIG_PCI_DEBUG is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=m -CONFIG_NET_KEY=m -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set -CONFIG_NET_IPIP=y -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_IPCOMP=m -CONFIG_INET_TUNNEL=y -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -# CONFIG_NETFILTER_NETLINK is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_CT_ACCT=y -CONFIG_IP_NF_CONNTRACK_MARK=y -CONFIG_IP_NF_CONNTRACK_EVENTS=y -CONFIG_IP_NF_CT_PROTO_SCTP=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -# CONFIG_IP_NF_NETBIOS_NS is not set -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -# CONFIG_IP_NF_PPTP is not set -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -CONFIG_IP_NF_MATCH_SCTP=m -# CONFIG_IP_NF_MATCH_DCCP is not set -CONFIG_IP_NF_MATCH_COMMENT=m -CONFIG_IP_NF_MATCH_CONNMARK=m -CONFIG_IP_NF_MATCH_CONNBYTES=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_MATCH_STRING=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_TARGET_NFQUEUE=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_TARGET_CONNMARK=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -CONFIG_LLC=y -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set -CONFIG_NET_CLS_ROUTE=y - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -# CONFIG_DEBUG_DRIVER is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_NBD=m -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_UB is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=65536 -CONFIG_BLK_DEV_INITRD=y -CONFIG_CDROM_PKTCDVD=m -CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECD=y -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_IDEPCI=y -# CONFIG_IDEPCI_SHARE_IRQ is not set -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_GENERIC is not set -# CONFIG_BLK_DEV_OPTI621 is not set -# CONFIG_BLK_DEV_SL82C105 is not set -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -# CONFIG_BLK_DEV_AEC62XX is not set -# CONFIG_BLK_DEV_ALI15X3 is not set -# CONFIG_BLK_DEV_AMD74XX is not set -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_SC1200 is not set -# CONFIG_BLK_DEV_PIIX is not set -# CONFIG_BLK_DEV_IT821X is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -# CONFIG_BLK_DEV_PDC202XX_NEW is not set -# CONFIG_BLK_DEV_SVWKS is not set -# CONFIG_BLK_DEV_SIIMAGE is not set -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -# CONFIG_BLK_DEV_VIA82CXXX is not set -CONFIG_BLK_DEV_IDE_PMAC=y -CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y -CONFIG_BLK_DEV_IDEDMA_PMAC=y -# CONFIG_BLK_DEV_IDE_PMAC_BLINK is not set -# CONFIG_IDE_ARM is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=y -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=y -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -CONFIG_SCSI_CONSTANTS=y -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transport Attributes -# -CONFIG_SCSI_SPI_ATTRS=y -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -CONFIG_SCSI_SATA=y -# CONFIG_SCSI_SATA_AHCI is not set -CONFIG_SCSI_SATA_SVW=y -# CONFIG_SCSI_ATA_PIIX is not set -# CONFIG_SCSI_SATA_MV is not set -# CONFIG_SCSI_SATA_NV is not set -# CONFIG_SCSI_SATA_PROMISE is not set -# CONFIG_SCSI_SATA_QSTOR is not set -# CONFIG_SCSI_SATA_SX4 is not set -# CONFIG_SCSI_SATA_SIL is not set -# CONFIG_SCSI_SATA_SIS is not set -# CONFIG_SCSI_SATA_ULI is not set -# CONFIG_SCSI_SATA_VIA is not set -# CONFIG_SCSI_SATA_VITESSE is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_FC is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA24XX is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_DEBUG is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=y -CONFIG_MD_LINEAR=y -CONFIG_MD_RAID0=y -CONFIG_MD_RAID1=y -CONFIG_MD_RAID10=m -CONFIG_MD_RAID5=y -CONFIG_MD_RAID6=m -CONFIG_MD_MULTIPATH=m -CONFIG_MD_FAULTY=m -CONFIG_BLK_DEV_DM=y -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_MIRROR=m -CONFIG_DM_ZERO=m -# CONFIG_DM_MULTIPATH is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set - -# -# IEEE 1394 (FireWire) support -# -CONFIG_IEEE1394=y - -# -# Subsystem Options -# -# CONFIG_IEEE1394_VERBOSEDEBUG is not set -CONFIG_IEEE1394_OUI_DB=y -CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y -CONFIG_IEEE1394_CONFIG_ROM_IP1394=y -# CONFIG_IEEE1394_EXPORT_FULL_API is not set - -# -# Device Drivers -# -# CONFIG_IEEE1394_PCILYNX is not set -CONFIG_IEEE1394_OHCI1394=y - -# -# Protocol Drivers -# -CONFIG_IEEE1394_VIDEO1394=m -CONFIG_IEEE1394_SBP2=m -# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set -CONFIG_IEEE1394_ETH1394=m -CONFIG_IEEE1394_DV1394=m -CONFIG_IEEE1394_RAWIO=y -# CONFIG_IEEE1394_CMP is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# -CONFIG_ADB_PMU=y -CONFIG_PMAC_SMU=y -CONFIG_THERM_PM72=y - -# -# Network device support -# -CONFIG_NETDEVICES=y -CONFIG_DUMMY=m -CONFIG_BONDING=m -# CONFIG_EQUALIZER is not set -CONFIG_TUN=m - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -CONFIG_SUNGEM=y -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -# CONFIG_NET_PCI is not set - -# -# Ethernet (1000 Mbit) -# -CONFIG_ACENIC=y -CONFIG_ACENIC_OMIT_TIGON_I=y -# CONFIG_DL2K is not set -CONFIG_E1000=y -# CONFIG_E1000_NAPI is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SK98LIN is not set -CONFIG_TIGON3=m -# CONFIG_BNX2 is not set -# CONFIG_MV643XX_ETH is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -CONFIG_TR=y -CONFIG_IBMOL=y -# CONFIG_3C359 is not set -# CONFIG_TMS380TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=m -# CONFIG_INPUT_TSDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -# CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -CONFIG_INPUT_MOUSE=y -# CONFIG_MOUSE_PS2 is not set -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_PCIPS2 is not set -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -# CONFIG_SERIAL_PMACZILOG is not set -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -CONFIG_AGP=m -CONFIG_AGP_UNINORTH=m -# CONFIG_DRM is not set -CONFIG_RAW_DRIVER=y -CONFIG_MAX_RAW_DEVS=256 -# CONFIG_HANGCHECK_TIMER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=y -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_KEYWEST=y -CONFIG_I2C_PMAC_SMU=y -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set - -# -# Misc devices -# - -# -# Multimedia Capabilities Port drivers -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -CONFIG_FB=y -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y -CONFIG_FB_MACMODES=y -CONFIG_FB_MODE_HELPERS=y -CONFIG_FB_TILEBLITTING=y -# CONFIG_FB_CIRRUS is not set -# CONFIG_FB_PM2 is not set -# CONFIG_FB_CYBER2000 is not set -CONFIG_FB_OF=y -# CONFIG_FB_CONTROL is not set -# CONFIG_FB_PLATINUM is not set -# CONFIG_FB_VALKYRIE is not set -# CONFIG_FB_CT65550 is not set -# CONFIG_FB_ASILIANT is not set -# CONFIG_FB_IMSTT is not set -# CONFIG_FB_VGA16 is not set -# CONFIG_FB_NVIDIA is not set -CONFIG_FB_RIVA=y -# CONFIG_FB_RIVA_I2C is not set -# CONFIG_FB_RIVA_DEBUG is not set -# CONFIG_FB_MATROX is not set -# CONFIG_FB_RADEON_OLD is not set -CONFIG_FB_RADEON=y -CONFIG_FB_RADEON_I2C=y -# CONFIG_FB_RADEON_DEBUG is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_ATY is not set -# CONFIG_FB_SAVAGE is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_KYRO is not set -# CONFIG_FB_3DFX is not set -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_CYBLA is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_VIRTUAL is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y - -# -# Logo configuration -# -CONFIG_LOGO=y -CONFIG_LOGO_LINUX_MONO=y -CONFIG_LOGO_LINUX_VGA16=y -CONFIG_LOGO_LINUX_CLUT224=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_BACKLIGHT_CLASS_DEVICE=m -CONFIG_BACKLIGHT_DEVICE=y -CONFIG_LCD_CLASS_DEVICE=m -CONFIG_LCD_DEVICE=y - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_OTG is not set - -# -# USB Host Controller Drivers -# -CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set -# CONFIG_USB_EHCI_ROOT_HUB_TT is not set -# CONFIG_USB_ISP116X_HCD is not set -CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -# CONFIG_USB_UHCI_HCD is not set -# CONFIG_USB_SL811_HCD is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_BLUETOOTH_TTY is not set -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=y - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=y -# CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_DATAFAB=y -CONFIG_USB_STORAGE_FREECOM=y -CONFIG_USB_STORAGE_ISD200=y -CONFIG_USB_STORAGE_DPCM=y -# CONFIG_USB_STORAGE_USBAT is not set -CONFIG_USB_STORAGE_SDDR09=y -CONFIG_USB_STORAGE_SDDR55=y -CONFIG_USB_STORAGE_JUMPSHOT=y -# CONFIG_USB_STORAGE_ONETOUCH is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=y -CONFIG_USB_HIDINPUT=y -CONFIG_HID_FF=y -CONFIG_HID_PID=y -CONFIG_LOGITECH_FF=y -CONFIG_THRUSTMASTER_FF=y -CONFIG_USB_HIDDEV=y -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -# CONFIG_USB_EGALAX is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set - -# -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - -# -# USB Network Adapters -# -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_USBNET=m -# CONFIG_USB_NET_AX8817X is not set -CONFIG_USB_NET_CDCETHER=m -# CONFIG_USB_NET_GL620A is not set -# CONFIG_USB_NET_NET1080 is not set -# CONFIG_USB_NET_PLUSB is not set -# CONFIG_USB_NET_RNDIS_HOST is not set -# CONFIG_USB_NET_CDC_SUBSET is not set -# CONFIG_USB_NET_ZAURUS is not set -CONFIG_USB_MON=y - -# -# USB port drivers -# - -# -# USB Serial Converter support -# -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -# CONFIG_USB_SERIAL_AIRPRIME is not set -CONFIG_USB_SERIAL_BELKIN=m -CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -# CONFIG_USB_SERIAL_CP2101 is not set -CONFIG_USB_SERIAL_CYPRESS_M8=m -CONFIG_USB_SERIAL_EMPEG=m -CONFIG_USB_SERIAL_FTDI_SIO=m -CONFIG_USB_SERIAL_VISOR=m -CONFIG_USB_SERIAL_IPAQ=m -CONFIG_USB_SERIAL_IR=m -CONFIG_USB_SERIAL_EDGEPORT=m -CONFIG_USB_SERIAL_EDGEPORT_TI=m -CONFIG_USB_SERIAL_GARMIN=m -CONFIG_USB_SERIAL_IPW=m -CONFIG_USB_SERIAL_KEYSPAN_PDA=m -CONFIG_USB_SERIAL_KEYSPAN=m -CONFIG_USB_SERIAL_KEYSPAN_MPR=y -CONFIG_USB_SERIAL_KEYSPAN_USA28=y -CONFIG_USB_SERIAL_KEYSPAN_USA28X=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y -CONFIG_USB_SERIAL_KEYSPAN_USA19=y -CONFIG_USB_SERIAL_KEYSPAN_USA18X=y -CONFIG_USB_SERIAL_KEYSPAN_USA19W=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y -CONFIG_USB_SERIAL_KEYSPAN_USA49W=y -CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y -CONFIG_USB_SERIAL_KLSI=m -CONFIG_USB_SERIAL_KOBIL_SCT=m -CONFIG_USB_SERIAL_MCT_U232=m -CONFIG_USB_SERIAL_PL2303=m -# CONFIG_USB_SERIAL_HP4X is not set -CONFIG_USB_SERIAL_SAFE=m -CONFIG_USB_SERIAL_SAFE_PADDED=y -CONFIG_USB_SERIAL_TI=m -CONFIG_USB_SERIAL_CYBERJACK=m -CONFIG_USB_SERIAL_XIRCOM=m -CONFIG_USB_SERIAL_OMNINET=m -CONFIG_USB_EZUSB=y - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_AUERSWALD is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGETKIT is not set -# CONFIG_USB_PHIDGETSERVO is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_SISUSBVGA is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# SN Devices -# - -# -# File systems -# -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT2_FS_SECURITY=y -CONFIG_EXT2_FS_XIP=y -CONFIG_FS_XIP=y -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_EXT3_FS_SECURITY=y -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -CONFIG_REISERFS_FS_SECURITY=y -# CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y -CONFIG_XFS_FS=m -CONFIG_XFS_EXPORT=y -# CONFIG_XFS_QUOTA is not set -CONFIG_XFS_SECURITY=y -CONFIG_XFS_POSIX_ACL=y -# CONFIG_XFS_RT is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -CONFIG_AUTOFS_FS=m -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_ZISOFS_FS=y -CONFIG_UDF_FS=m -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -CONFIG_HUGETLBFS=y -CONFIG_HUGETLB_PAGE=y -CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -CONFIG_HFS_FS=m -CONFIG_HFSPLUS_FS=m -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_CRAMFS=y -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=y -CONFIG_NFSD_V2_ACL=y -CONFIG_NFSD_V3=y -CONFIG_NFSD_V3_ACL=y -CONFIG_NFSD_V4=y -CONFIG_NFSD_TCP=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=y -CONFIG_NFS_ACL_SUPPORT=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=y -CONFIG_RPCSEC_GSS_KRB5=y -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -CONFIG_CIFS=m -# CONFIG_CIFS_STATS is not set -# CONFIG_CIFS_XATTR is not set -# CONFIG_CIFS_EXPERIMENTAL is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -CONFIG_MAC_PARTITION=y -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=y -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -CONFIG_NLS_CODEPAGE_1250=y -CONFIG_NLS_CODEPAGE_1251=y -CONFIG_NLS_ASCII=y -CONFIG_NLS_ISO8859_1=y -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -CONFIG_NLS_ISO8859_15=y -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -CONFIG_NLS_UTF8=y - -# -# Profiling support -# -CONFIG_PROFILING=y -CONFIG_OPROFILE=y - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_LOG_BUF_SHIFT=17 -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_INFO is not set -CONFIG_DEBUG_FS=y -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_KPROBES is not set -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUGGER is not set -# CONFIG_PPCDBG is not set -CONFIG_IRQSTACKS=y - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -# CONFIG_CRYPTO_TGR192 is not set -CONFIG_CRYPTO_DES=y -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_TEST=m - -# -# Hardware crypto devices -# - -# -# Library routines -# -CONFIG_CRC_CCITT=m -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/ppc64/configs/iSeries_defconfig b/arch/ppc64/configs/iSeries_defconfig deleted file mode 100644 index 62e92c7..0000000 --- a/arch/ppc64/configs/iSeries_defconfig +++ /dev/null @@ -1,998 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc4 -# Thu Oct 20 08:30:56 2005 -# -CONFIG_64BIT=y -CONFIG_MMU=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_EARLY_PRINTK=y -CONFIG_COMPAT=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_FORCE_MAX_ZONEORDER=13 - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_AUDIT=y -CONFIG_AUDITSYSCALL=y -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -# CONFIG_CPUSETS is not set -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_EMBEDDED is not set -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_KMOD=y -CONFIG_STOP_MACHINE=y -CONFIG_SYSVIPC_COMPAT=y - -# -# Platform support -# -CONFIG_PPC_ISERIES=y -# CONFIG_PPC_MULTIPLATFORM is not set -CONFIG_PPC=y -CONFIG_PPC64=y -CONFIG_IBMVIO=y -# CONFIG_POWER4_ONLY is not set -CONFIG_IOMMU_VMERGE=y -CONFIG_SMP=y -CONFIG_NR_CPUS=32 -CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_NUMA is not set -# CONFIG_SCHED_SMT is not set -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -# CONFIG_PREEMPT_BKL is not set -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_GENERIC_HARDIRQS=y -CONFIG_LPARCFG=y -CONFIG_SECCOMP=y -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_ISA_DMA_API=y - -# -# Bus Options -# -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_LEGACY_PROC=y -# CONFIG_PCI_DEBUG is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=m -CONFIG_NET_KEY=m -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set -CONFIG_NET_IPIP=y -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_IPCOMP=m -CONFIG_INET_TUNNEL=y -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -# CONFIG_NETFILTER_NETLINK is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_CT_ACCT=y -CONFIG_IP_NF_CONNTRACK_MARK=y -CONFIG_IP_NF_CONNTRACK_EVENTS=y -CONFIG_IP_NF_CT_PROTO_SCTP=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -# CONFIG_IP_NF_NETBIOS_NS is not set -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -# CONFIG_IP_NF_PPTP is not set -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -CONFIG_IP_NF_MATCH_SCTP=m -# CONFIG_IP_NF_MATCH_DCCP is not set -CONFIG_IP_NF_MATCH_COMMENT=m -CONFIG_IP_NF_MATCH_CONNMARK=m -CONFIG_IP_NF_MATCH_CONNBYTES=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_MATCH_STRING=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_TARGET_NFQUEUE=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_TARGET_CONNMARK=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -CONFIG_LLC=y -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set -CONFIG_NET_CLS_ROUTE=y - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m -# CONFIG_DEBUG_DRIVER is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_NBD=m -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=65536 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=y -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=y -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -CONFIG_SCSI_CONSTANTS=y -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transport Attributes -# -CONFIG_SCSI_SPI_ATTRS=y -CONFIG_SCSI_FC_ATTRS=y -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -CONFIG_SCSI_IBMVSCSI=m -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_FC is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA24XX is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_DEBUG is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=y -CONFIG_MD_LINEAR=y -CONFIG_MD_RAID0=y -CONFIG_MD_RAID1=y -CONFIG_MD_RAID10=m -CONFIG_MD_RAID5=y -CONFIG_MD_RAID6=m -CONFIG_MD_MULTIPATH=m -CONFIG_MD_FAULTY=m -CONFIG_BLK_DEV_DM=y -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_MIRROR=m -CONFIG_DM_ZERO=m -# CONFIG_DM_MULTIPATH is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# - -# -# Network device support -# -CONFIG_NETDEVICES=y -CONFIG_DUMMY=m -CONFIG_BONDING=m -# CONFIG_EQUALIZER is not set -CONFIG_TUN=m - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_NET_PCI=y -CONFIG_PCNET32=y -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set -# CONFIG_EEPRO100 is not set -CONFIG_E100=y -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_VIA_RHINE is not set - -# -# Ethernet (1000 Mbit) -# -CONFIG_ACENIC=m -# CONFIG_ACENIC_OMIT_TIGON_I is not set -# CONFIG_DL2K is not set -CONFIG_E1000=m -# CONFIG_E1000_NAPI is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -CONFIG_TR=y -CONFIG_IBMOL=y -# CONFIG_3C359 is not set -# CONFIG_TMS380TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -CONFIG_ISERIES_VETH=y -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set -CONFIG_NETCONSOLE=y -CONFIG_NETPOLL=y -CONFIG_NETPOLL_RX=y -CONFIG_NETPOLL_TRAP=y -CONFIG_NET_POLL_CONTROLLER=y - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=m -CONFIG_SERIAL_ICOM=m -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -CONFIG_RAW_DRIVER=y -CONFIG_MAX_RAW_DEVS=256 -# CONFIG_HANGCHECK_TIMER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set - -# -# Misc devices -# - -# -# Multimedia Capabilities Port drivers -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# SN Devices -# - -# -# File systems -# -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT2_FS_SECURITY=y -CONFIG_EXT2_FS_XIP=y -CONFIG_FS_XIP=y -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_EXT3_FS_SECURITY=y -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -CONFIG_REISERFS_FS_SECURITY=y -CONFIG_JFS_FS=m -CONFIG_JFS_POSIX_ACL=y -CONFIG_JFS_SECURITY=y -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -CONFIG_FS_POSIX_ACL=y -CONFIG_XFS_FS=m -CONFIG_XFS_EXPORT=y -# CONFIG_XFS_QUOTA is not set -CONFIG_XFS_SECURITY=y -CONFIG_XFS_POSIX_ACL=y -# CONFIG_XFS_RT is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -CONFIG_AUTOFS_FS=m -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_ZISOFS_FS=y -CONFIG_UDF_FS=m -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_HUGETLBFS is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_CRAMFS=y -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=m -CONFIG_NFSD_V2_ACL=y -CONFIG_NFSD_V3=y -CONFIG_NFSD_V3_ACL=y -CONFIG_NFSD_V4=y -CONFIG_NFSD_TCP=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=m -CONFIG_NFS_ACL_SUPPORT=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=y -CONFIG_RPCSEC_GSS_KRB5=y -CONFIG_RPCSEC_GSS_SPKM3=m -# CONFIG_SMB_FS is not set -CONFIG_CIFS=m -# CONFIG_CIFS_STATS is not set -CONFIG_CIFS_XATTR=y -CONFIG_CIFS_POSIX=y -# CONFIG_CIFS_EXPERIMENTAL is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=y -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -CONFIG_NLS_ASCII=y -CONFIG_NLS_ISO8859_1=y -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# iSeries device drivers -# -CONFIG_VIOCONS=y -CONFIG_VIODASD=y -CONFIG_VIOCD=m -CONFIG_VIOTAPE=m -CONFIG_VIOPATH=y - -# -# Profiling support -# -CONFIG_PROFILING=y -CONFIG_OPROFILE=y - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_LOG_BUF_SHIFT=17 -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_INFO is not set -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_STACKOVERFLOW=y -# CONFIG_KPROBES is not set -CONFIG_DEBUG_STACK_USAGE=y -# CONFIG_DEBUGGER is not set -# CONFIG_PPCDBG is not set -CONFIG_IRQSTACKS=y - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_DES=y -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_TEST=m - -# -# Hardware crypto devices -# - -# -# Library routines -# -CONFIG_CRC_CCITT=m -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/ppc64/configs/maple_defconfig b/arch/ppc64/configs/maple_defconfig deleted file mode 100644 index 7b480f3..0000000 --- a/arch/ppc64/configs/maple_defconfig +++ /dev/null @@ -1,1062 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc4 -# Thu Oct 20 08:31:24 2005 -# -CONFIG_64BIT=y -CONFIG_MMU=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_EARLY_PRINTK=y -CONFIG_COMPAT=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_FORCE_MAX_ZONEORDER=13 - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -# CONFIG_CPUSETS is not set -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_EMBEDDED is not set -CONFIG_KALLSYMS=y -CONFIG_KALLSYMS_ALL=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_KMOD=y -CONFIG_STOP_MACHINE=y -CONFIG_SYSVIPC_COMPAT=y - -# -# Platform support -# -# CONFIG_PPC_ISERIES is not set -CONFIG_PPC_MULTIPLATFORM=y -# CONFIG_PPC_PSERIES is not set -# CONFIG_PPC_BPA is not set -# CONFIG_PPC_PMAC is not set -CONFIG_PPC_MAPLE=y -CONFIG_PPC=y -CONFIG_PPC64=y -CONFIG_PPC_OF=y -CONFIG_MPIC=y -# CONFIG_ALTIVEC is not set -CONFIG_KEXEC=y -CONFIG_U3_DART=y -CONFIG_MPIC_BROKEN_U3=y -CONFIG_BOOTX_TEXT=y -CONFIG_POWER4_ONLY=y -CONFIG_IOMMU_VMERGE=y -CONFIG_SMP=y -CONFIG_NR_CPUS=2 -CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_NUMA is not set -# CONFIG_SCHED_SMT is not set -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -# CONFIG_PREEMPT_BKL is not set -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_GENERIC_HARDIRQS=y -CONFIG_SECCOMP=y -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_PROC_DEVICETREE=y -# CONFIG_CMDLINE_BOOL is not set -CONFIG_ISA_DMA_API=y - -# -# Bus Options -# -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_LEGACY_PROC=y -# CONFIG_PCI_DEBUG is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set -# CONFIG_DEBUG_DRIVER is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -# CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_UB is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=8192 -# CONFIG_BLK_DEV_INITRD is not set -# CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECD=y -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -CONFIG_IDE_TASK_IOCTL=y - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -# CONFIG_BLK_DEV_OFFBOARD is not set -CONFIG_BLK_DEV_GENERIC=y -# CONFIG_BLK_DEV_OPTI621 is not set -# CONFIG_BLK_DEV_SL82C105 is not set -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -# CONFIG_BLK_DEV_AEC62XX is not set -# CONFIG_BLK_DEV_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=y -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_SC1200 is not set -# CONFIG_BLK_DEV_PIIX is not set -# CONFIG_BLK_DEV_IT821X is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -# CONFIG_BLK_DEV_PDC202XX_NEW is not set -# CONFIG_BLK_DEV_SVWKS is not set -# CONFIG_BLK_DEV_SIIMAGE is not set -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -# CONFIG_BLK_DEV_VIA82CXXX is not set -# CONFIG_IDE_ARM is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -CONFIG_AMD8111_ETH=y -# CONFIG_AMD8111E_NAPI is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set -# CONFIG_EEPRO100 is not set -# CONFIG_E100 is not set -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_VIA_RHINE is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -CONFIG_E1000=y -# CONFIG_E1000_NAPI is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -# CONFIG_MV643XX_ETH is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1600 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_HANGCHECK_TIMER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=y -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -CONFIG_I2C_AMD8111=y -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set - -# -# Misc devices -# - -# -# Multimedia Capabilities Port drivers -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_OTG is not set - -# -# USB Host Controller Drivers -# -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_SPLIT_ISO=y -CONFIG_USB_EHCI_ROOT_HUB_TT=y -# CONFIG_USB_ISP116X_HCD is not set -CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -CONFIG_USB_UHCI_HCD=y -# CONFIG_USB_SL811_HCD is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_BLUETOOTH_TTY is not set -# CONFIG_USB_ACM is not set -# CONFIG_USB_PRINTER is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# -# CONFIG_USB_STORAGE is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=y -CONFIG_USB_HIDINPUT=y -# CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -# CONFIG_USB_EGALAX is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set - -# -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -CONFIG_USB_PEGASUS=y -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET is not set -CONFIG_USB_MON=y - -# -# USB port drivers -# - -# -# USB Serial Converter support -# -CONFIG_USB_SERIAL=y -# CONFIG_USB_SERIAL_CONSOLE is not set -CONFIG_USB_SERIAL_GENERIC=y -# CONFIG_USB_SERIAL_AIRPRIME is not set -# CONFIG_USB_SERIAL_BELKIN is not set -# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set -# CONFIG_USB_SERIAL_CP2101 is not set -CONFIG_USB_SERIAL_CYPRESS_M8=m -# CONFIG_USB_SERIAL_EMPEG is not set -# CONFIG_USB_SERIAL_FTDI_SIO is not set -# CONFIG_USB_SERIAL_VISOR is not set -# CONFIG_USB_SERIAL_IPAQ is not set -# CONFIG_USB_SERIAL_IR is not set -# CONFIG_USB_SERIAL_EDGEPORT is not set -# CONFIG_USB_SERIAL_EDGEPORT_TI is not set -CONFIG_USB_SERIAL_GARMIN=m -CONFIG_USB_SERIAL_IPW=m -# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set -CONFIG_USB_SERIAL_KEYSPAN=y -CONFIG_USB_SERIAL_KEYSPAN_MPR=y -CONFIG_USB_SERIAL_KEYSPAN_USA28=y -CONFIG_USB_SERIAL_KEYSPAN_USA28X=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y -CONFIG_USB_SERIAL_KEYSPAN_USA19=y -CONFIG_USB_SERIAL_KEYSPAN_USA18X=y -CONFIG_USB_SERIAL_KEYSPAN_USA19W=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y -CONFIG_USB_SERIAL_KEYSPAN_USA49W=y -CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y -# CONFIG_USB_SERIAL_KLSI is not set -# CONFIG_USB_SERIAL_KOBIL_SCT is not set -# CONFIG_USB_SERIAL_MCT_U232 is not set -# CONFIG_USB_SERIAL_PL2303 is not set -# CONFIG_USB_SERIAL_HP4X is not set -# CONFIG_USB_SERIAL_SAFE is not set -CONFIG_USB_SERIAL_TI=m -# CONFIG_USB_SERIAL_CYBERJACK is not set -# CONFIG_USB_SERIAL_XIRCOM is not set -# CONFIG_USB_SERIAL_OMNINET is not set -CONFIG_USB_EZUSB=y - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_AUERSWALD is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGETKIT is not set -# CONFIG_USB_PHIDGETSERVO is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_SISUSBVGA is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# SN Devices -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -CONFIG_EXT2_FS_XIP=y -CONFIG_FS_XIP=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -CONFIG_HUGETLBFS=y -CONFIG_HUGETLB_PAGE=y -CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_CRAMFS=y -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_ACL_SUPPORT=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=y -CONFIG_RPCSEC_GSS_KRB5=y -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -CONFIG_MAC_PARTITION=y -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="utf-8" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -CONFIG_NLS_UTF8=y - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_LOG_BUF_SHIFT=17 -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_SCHEDSTATS is not set -CONFIG_DEBUG_SLAB=y -# CONFIG_DEBUG_SPINLOCK is not set -CONFIG_DEBUG_SPINLOCK_SLEEP=y -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_INFO is not set -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_STACKOVERFLOW=y -# CONFIG_KPROBES is not set -CONFIG_DEBUG_STACK_USAGE=y -CONFIG_DEBUGGER=y -CONFIG_XMON=y -CONFIG_XMON_DEFAULT=y -# CONFIG_PPCDBG is not set -# CONFIG_IRQSTACKS is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -# CONFIG_CRYPTO_HMAC is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=y -# CONFIG_CRYPTO_SHA1 is not set -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set -# CONFIG_CRYPTO_TGR192 is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -CONFIG_CRC_CCITT=y -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y diff --git a/arch/ppc64/configs/pSeries_defconfig b/arch/ppc64/configs/pSeries_defconfig deleted file mode 100644 index 9f09dff..0000000 --- a/arch/ppc64/configs/pSeries_defconfig +++ /dev/null @@ -1,1371 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc4 -# Thu Oct 20 08:32:17 2005 -# -CONFIG_64BIT=y -CONFIG_MMU=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_EARLY_PRINTK=y -CONFIG_COMPAT=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_FORCE_MAX_ZONEORDER=13 - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_AUDIT=y -CONFIG_AUDITSYSCALL=y -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_CPUSETS=y -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_EMBEDDED is not set -CONFIG_KALLSYMS=y -CONFIG_KALLSYMS_ALL=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_KMOD=y -CONFIG_STOP_MACHINE=y -CONFIG_SYSVIPC_COMPAT=y - -# -# Platform support -# -# CONFIG_PPC_ISERIES is not set -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_PPC_PSERIES=y -# CONFIG_PPC_BPA is not set -# CONFIG_PPC_PMAC is not set -# CONFIG_PPC_MAPLE is not set -CONFIG_PPC=y -CONFIG_PPC64=y -CONFIG_PPC_OF=y -CONFIG_XICS=y -CONFIG_MPIC=y -CONFIG_ALTIVEC=y -CONFIG_PPC_SPLPAR=y -CONFIG_KEXEC=y -CONFIG_IBMVIO=y -# CONFIG_U3_DART is not set -# CONFIG_BOOTX_TEXT is not set -# CONFIG_POWER4_ONLY is not set -CONFIG_IOMMU_VMERGE=y -CONFIG_SMP=y -CONFIG_NR_CPUS=128 -CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_ARCH_DISCONTIGMEM_ENABLE=y -CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y -CONFIG_ARCH_SPARSEMEM_ENABLE=y -CONFIG_SELECT_MEMORY_MODEL=y -# CONFIG_FLATMEM_MANUAL is not set -CONFIG_DISCONTIGMEM_MANUAL=y -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_DISCONTIGMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_NEED_MULTIPLE_NODES=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y -CONFIG_NODES_SPAN_OTHER_NODES=y -CONFIG_NUMA=y -CONFIG_SCHED_SMT=y -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -# CONFIG_PREEMPT_BKL is not set -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_EEH=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_PPC_RTAS=y -CONFIG_RTAS_PROC=y -CONFIG_RTAS_FLASH=m -CONFIG_SCANLOG=m -CONFIG_LPARCFG=y -CONFIG_SECCOMP=y -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_HOTPLUG_CPU=y -CONFIG_PROC_DEVICETREE=y -# CONFIG_CMDLINE_BOOL is not set -CONFIG_ISA_DMA_API=y - -# -# Bus Options -# -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_LEGACY_PROC=y -# CONFIG_PCI_DEBUG is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# -CONFIG_HOTPLUG_PCI=m -# CONFIG_HOTPLUG_PCI_FAKE is not set -# CONFIG_HOTPLUG_PCI_CPCI is not set -# CONFIG_HOTPLUG_PCI_SHPC is not set -CONFIG_HOTPLUG_PCI_RPA=m -CONFIG_HOTPLUG_PCI_RPA_DLPAR=m - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=m -CONFIG_NET_KEY=m -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set -CONFIG_NET_IPIP=y -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_IPCOMP=m -CONFIG_INET_TUNNEL=y -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -CONFIG_NETFILTER_NETLINK=y -CONFIG_NETFILTER_NETLINK_QUEUE=m -CONFIG_NETFILTER_NETLINK_LOG=m - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_CT_ACCT=y -CONFIG_IP_NF_CONNTRACK_MARK=y -CONFIG_IP_NF_CONNTRACK_EVENTS=y -CONFIG_IP_NF_CONNTRACK_NETLINK=m -CONFIG_IP_NF_CT_PROTO_SCTP=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -# CONFIG_IP_NF_NETBIOS_NS is not set -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -# CONFIG_IP_NF_PPTP is not set -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -CONFIG_IP_NF_MATCH_SCTP=m -# CONFIG_IP_NF_MATCH_DCCP is not set -CONFIG_IP_NF_MATCH_COMMENT=m -CONFIG_IP_NF_MATCH_CONNMARK=m -CONFIG_IP_NF_MATCH_CONNBYTES=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_MATCH_STRING=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_TARGET_NFQUEUE=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_TARGET_CONNMARK=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -CONFIG_LLC=y -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set -CONFIG_NET_CLS_ROUTE=y - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -# CONFIG_DEBUG_DRIVER is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -# CONFIG_PARPORT_SERIAL is not set -# CONFIG_PARPORT_PC_FIFO is not set -# CONFIG_PARPORT_PC_SUPERIO is not set -# CONFIG_PARPORT_GSC is not set -# CONFIG_PARPORT_1284 is not set - -# -# Plug and Play support -# - -# -# Block devices -# -CONFIG_BLK_DEV_FD=m -# CONFIG_PARIDE is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_NBD=m -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_UB is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=65536 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECD=y -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -# CONFIG_BLK_DEV_OFFBOARD is not set -CONFIG_BLK_DEV_GENERIC=y -# CONFIG_BLK_DEV_OPTI621 is not set -CONFIG_BLK_DEV_SL82C105=y -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -# CONFIG_BLK_DEV_AEC62XX is not set -# CONFIG_BLK_DEV_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=y -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_SC1200 is not set -# CONFIG_BLK_DEV_PIIX is not set -# CONFIG_BLK_DEV_IT821X is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -# CONFIG_BLK_DEV_PDC202XX_NEW is not set -# CONFIG_BLK_DEV_SVWKS is not set -# CONFIG_BLK_DEV_SIIMAGE is not set -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -# CONFIG_BLK_DEV_VIA82CXXX is not set -# CONFIG_IDE_ARM is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=y -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=y -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -CONFIG_SCSI_CONSTANTS=y -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transport Attributes -# -CONFIG_SCSI_SPI_ATTRS=y -CONFIG_SCSI_FC_ATTRS=y -CONFIG_SCSI_ISCSI_ATTRS=m -# CONFIG_SCSI_SAS_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -CONFIG_SCSI_IBMVSCSI=y -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_PPA is not set -# CONFIG_SCSI_IMM is not set -CONFIG_SCSI_SYM53C8XX_2=y -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set -CONFIG_SCSI_IPR=y -CONFIG_SCSI_IPR_TRACE=y -CONFIG_SCSI_IPR_DUMP=y -# CONFIG_SCSI_QLOGIC_FC is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -CONFIG_SCSI_QLA21XX=m -CONFIG_SCSI_QLA22XX=m -CONFIG_SCSI_QLA2300=m -CONFIG_SCSI_QLA2322=m -CONFIG_SCSI_QLA6312=m -CONFIG_SCSI_QLA24XX=m -CONFIG_SCSI_LPFC=m -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_DEBUG is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=y -CONFIG_MD_LINEAR=y -CONFIG_MD_RAID0=y -CONFIG_MD_RAID1=y -CONFIG_MD_RAID10=m -CONFIG_MD_RAID5=y -CONFIG_MD_RAID6=m -CONFIG_MD_MULTIPATH=m -CONFIG_MD_FAULTY=m -CONFIG_BLK_DEV_DM=y -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_MIRROR=m -CONFIG_DM_ZERO=m -CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# - -# -# Network device support -# -CONFIG_NETDEVICES=y -CONFIG_DUMMY=m -CONFIG_BONDING=m -# CONFIG_EQUALIZER is not set -CONFIG_TUN=m - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -CONFIG_NET_VENDOR_3COM=y -CONFIG_VORTEX=y -# CONFIG_TYPHOON is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_IBMVETH=y -CONFIG_NET_PCI=y -CONFIG_PCNET32=y -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set -# CONFIG_EEPRO100 is not set -CONFIG_E100=y -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_VIA_RHINE is not set -# CONFIG_NET_POCKET is not set - -# -# Ethernet (1000 Mbit) -# -CONFIG_ACENIC=y -CONFIG_ACENIC_OMIT_TIGON_I=y -# CONFIG_DL2K is not set -CONFIG_E1000=y -# CONFIG_E1000_NAPI is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -CONFIG_TIGON3=y -# CONFIG_BNX2 is not set -# CONFIG_MV643XX_ETH is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -CONFIG_IXGB=m -# CONFIG_IXGB_NAPI is not set -CONFIG_S2IO=m -# CONFIG_S2IO_NAPI is not set -# CONFIG_2BUFF_MODE is not set - -# -# Token Ring devices -# -CONFIG_TR=y -CONFIG_IBMOL=y -# CONFIG_3C359 is not set -# CONFIG_TMS380TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PLIP is not set -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set -CONFIG_NETCONSOLE=y -CONFIG_NETPOLL=y -CONFIG_NETPOLL_RX=y -CONFIG_NETPOLL_TRAP=y -CONFIG_NET_POLL_CONTROLLER=y - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=y -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -CONFIG_INPUT_MISC=y -CONFIG_INPUT_PCSPKR=m -# CONFIG_INPUT_UINPUT is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_PARKBD is not set -# CONFIG_SERIO_PCIPS2 is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_SERIAL_ICOM=m -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_PRINTER is not set -# CONFIG_PPDEV is not set -# CONFIG_TIPAR is not set -CONFIG_HVC_CONSOLE=y -CONFIG_HVCS=m - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -CONFIG_RAW_DRIVER=y -CONFIG_MAX_RAW_DEVS=1024 -# CONFIG_HANGCHECK_TIMER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -CONFIG_I2C=y -# CONFIG_I2C_CHARDEV is not set - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=y -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set - -# -# Misc devices -# - -# -# Multimedia Capabilities Port drivers -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -CONFIG_FB=y -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y -CONFIG_FB_MACMODES=y -CONFIG_FB_MODE_HELPERS=y -CONFIG_FB_TILEBLITTING=y -# CONFIG_FB_CIRRUS is not set -# CONFIG_FB_PM2 is not set -# CONFIG_FB_CYBER2000 is not set -CONFIG_FB_OF=y -# CONFIG_FB_CT65550 is not set -# CONFIG_FB_ASILIANT is not set -# CONFIG_FB_IMSTT is not set -# CONFIG_FB_VGA16 is not set -# CONFIG_FB_NVIDIA is not set -# CONFIG_FB_RIVA is not set -CONFIG_FB_MATROX=y -CONFIG_FB_MATROX_MILLENIUM=y -CONFIG_FB_MATROX_MYSTIQUE=y -CONFIG_FB_MATROX_G=y -# CONFIG_FB_MATROX_I2C is not set -CONFIG_FB_MATROX_MULTIHEAD=y -# CONFIG_FB_RADEON_OLD is not set -CONFIG_FB_RADEON=y -CONFIG_FB_RADEON_I2C=y -# CONFIG_FB_RADEON_DEBUG is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_ATY is not set -# CONFIG_FB_SAVAGE is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_KYRO is not set -# CONFIG_FB_3DFX is not set -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_CYBLA is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_VIRTUAL is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y - -# -# Logo configuration -# -CONFIG_LOGO=y -CONFIG_LOGO_LINUX_MONO=y -CONFIG_LOGO_LINUX_VGA16=y -CONFIG_LOGO_LINUX_CLUT224=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_BACKLIGHT_CLASS_DEVICE=m -CONFIG_BACKLIGHT_DEVICE=y -CONFIG_LCD_CLASS_DEVICE=m -CONFIG_LCD_DEVICE=y - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_OTG is not set - -# -# USB Host Controller Drivers -# -CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set -# CONFIG_USB_EHCI_ROOT_HUB_TT is not set -# CONFIG_USB_ISP116X_HCD is not set -CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -# CONFIG_USB_UHCI_HCD is not set -# CONFIG_USB_SL811_HCD is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_BLUETOOTH_TTY is not set -# CONFIG_USB_ACM is not set -# CONFIG_USB_PRINTER is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=y -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=y -CONFIG_USB_HIDINPUT=y -# CONFIG_HID_FF is not set -CONFIG_USB_HIDDEV=y -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -# CONFIG_USB_EGALAX is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set - -# -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET is not set -CONFIG_USB_MON=y - -# -# USB port drivers -# -# CONFIG_USB_USS720 is not set - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_AUERSWALD is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGETKIT is not set -# CONFIG_USB_PHIDGETSERVO is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_SISUSBVGA is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# InfiniBand support -# -CONFIG_INFINIBAND=m -# CONFIG_INFINIBAND_USER_MAD is not set -# CONFIG_INFINIBAND_USER_ACCESS is not set -CONFIG_INFINIBAND_MTHCA=m -# CONFIG_INFINIBAND_MTHCA_DEBUG is not set -CONFIG_INFINIBAND_IPOIB=m -# CONFIG_INFINIBAND_IPOIB_DEBUG is not set - -# -# SN Devices -# - -# -# File systems -# -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT2_FS_SECURITY=y -CONFIG_EXT2_FS_XIP=y -CONFIG_FS_XIP=y -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_EXT3_FS_SECURITY=y -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -CONFIG_REISERFS_FS_SECURITY=y -CONFIG_JFS_FS=m -CONFIG_JFS_POSIX_ACL=y -CONFIG_JFS_SECURITY=y -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -CONFIG_FS_POSIX_ACL=y -CONFIG_XFS_FS=m -CONFIG_XFS_EXPORT=y -# CONFIG_XFS_QUOTA is not set -CONFIG_XFS_SECURITY=y -CONFIG_XFS_POSIX_ACL=y -# CONFIG_XFS_RT is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -CONFIG_AUTOFS_FS=m -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_ZISOFS_FS=y -CONFIG_UDF_FS=m -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -CONFIG_HUGETLBFS=y -CONFIG_HUGETLB_PAGE=y -CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_CRAMFS=y -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=y -CONFIG_NFSD_V2_ACL=y -CONFIG_NFSD_V3=y -CONFIG_NFSD_V3_ACL=y -CONFIG_NFSD_V4=y -CONFIG_NFSD_TCP=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=y -CONFIG_NFS_ACL_SUPPORT=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=y -CONFIG_RPCSEC_GSS_KRB5=y -CONFIG_RPCSEC_GSS_SPKM3=m -# CONFIG_SMB_FS is not set -CONFIG_CIFS=m -# CONFIG_CIFS_STATS is not set -CONFIG_CIFS_XATTR=y -CONFIG_CIFS_POSIX=y -# CONFIG_CIFS_EXPERIMENTAL is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=y -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -CONFIG_NLS_ASCII=y -CONFIG_NLS_ISO8859_1=y -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# Profiling support -# -CONFIG_PROFILING=y -CONFIG_OPROFILE=y - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_LOG_BUF_SHIFT=17 -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_INFO is not set -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_STACKOVERFLOW=y -# CONFIG_KPROBES is not set -CONFIG_DEBUG_STACK_USAGE=y -CONFIG_DEBUGGER=y -CONFIG_XMON=y -CONFIG_XMON_DEFAULT=y -# CONFIG_PPCDBG is not set -CONFIG_IRQSTACKS=y - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_DES=y -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_TEST=m - -# -# Hardware crypto devices -# - -# -# Library routines -# -CONFIG_CRC_CCITT=m -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/ppc64/kernel/Makefile b/arch/ppc64/kernel/Makefile deleted file mode 100644 index e876c21..0000000 --- a/arch/ppc64/kernel/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# -# Makefile for the linux ppc64 kernel. -# - -obj-y += idle.o align.o - -obj-$(CONFIG_PPC_MULTIPLATFORM) += nvram.o diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 573b6a97..70d8a6e 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -514,8 +514,6 @@ static int acpi_processor_set_power_policy(struct acpi_processor *pr) static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr) { - int i; - ACPI_FUNCTION_TRACE("acpi_processor_get_power_info_fadt"); if (!pr) @@ -524,8 +522,7 @@ static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr) if (!pr->pblk) return_VALUE(-ENODEV); - for (i = 0; i < ACPI_PROCESSOR_MAX_POWER; i++) - memset(pr->power.states, 0, sizeof(struct acpi_processor_cx)); + memset(pr->power.states, 0, sizeof(pr->power.states)); /* if info is obtained from pblk/fadt, type equals state */ pr->power.states[ACPI_STATE_C1].type = ACPI_STATE_C1; @@ -555,13 +552,9 @@ static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr) static int acpi_processor_get_power_info_default_c1(struct acpi_processor *pr) { - int i; - ACPI_FUNCTION_TRACE("acpi_processor_get_power_info_default_c1"); - for (i = 0; i < ACPI_PROCESSOR_MAX_POWER; i++) - memset(&(pr->power.states[i]), 0, - sizeof(struct acpi_processor_cx)); + memset(pr->power.states, 0, sizeof(pr->power.states)); /* if info is obtained from pblk/fadt, type equals state */ pr->power.states[ACPI_STATE_C1].type = ACPI_STATE_C1; @@ -873,7 +866,8 @@ static int acpi_processor_get_power_info(struct acpi_processor *pr) for (i = 1; i < ACPI_PROCESSOR_MAX_POWER; i++) { if (pr->power.states[i].valid) { pr->power.count = i; - pr->flags.power = 1; + if (pr->power.states[i].type >= ACPI_STATE_C2) + pr->flags.power = 1; } } diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index ea89dca..01a1f6b 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -2203,7 +2203,7 @@ static void setup_xaction_handlers(struct smi_info *smi_info) static inline void wait_for_timer_and_thread(struct smi_info *smi_info) { - if (smi_info->thread != ERR_PTR(-ENOMEM)) + if (smi_info->thread != NULL && smi_info->thread != ERR_PTR(-ENOMEM)) kthread_stop(smi_info->thread); del_timer_sync(&smi_info->si_timer); } diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig index b58adfe..a6873bf 100644 --- a/drivers/char/tpm/Kconfig +++ b/drivers/char/tpm/Kconfig @@ -6,7 +6,7 @@ menu "TPM devices" config TCG_TPM tristate "TPM Hardware Support" - depends on EXPERIMENTAL && PCI + depends on EXPERIMENTAL ---help--- If you have a TPM security chip in your system, which implements the Trusted Computing Group's specification, diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c index 0b283d2..a9be0e8 100644 --- a/drivers/char/tpm/tpm.c +++ b/drivers/char/tpm/tpm.c @@ -377,6 +377,7 @@ int tpm_release(struct inode *inode, struct file *file) file->private_data = NULL; chip->num_opens--; del_singleshot_timer_sync(&chip->user_read_timer); + flush_scheduled_work(); atomic_set(&chip->data_pending, 0); put_device(chip->dev); kfree(chip->data_buffer); @@ -428,6 +429,7 @@ ssize_t tpm_read(struct file * file, char __user *buf, int ret_size; del_singleshot_timer_sync(&chip->user_read_timer); + flush_scheduled_work(); ret_size = atomic_read(&chip->data_pending); atomic_set(&chip->data_pending, 0); if (ret_size > 0) { /* relay data */ diff --git a/drivers/char/tpm/tpm_atmel.c b/drivers/char/tpm/tpm_atmel.c index deb4b5c..ff36549 100644 --- a/drivers/char/tpm/tpm_atmel.c +++ b/drivers/char/tpm/tpm_atmel.c @@ -47,13 +47,12 @@ static int tpm_atml_recv(struct tpm_chip *chip, u8 *buf, size_t count) return -EIO; for (i = 0; i < 6; i++) { - status = atmel_getb(chip, 1); + status = ioread8(chip->vendor->iobase + 1); if ((status & ATML_STATUS_DATA_AVAIL) == 0) { - dev_err(chip->dev, - "error reading header\n"); + dev_err(chip->dev, "error reading header\n"); return -EIO; } - *buf++ = atmel_getb(chip, 0); + *buf++ = ioread8(chip->vendor->iobase); } /* size of the data received */ @@ -64,10 +63,9 @@ static int tpm_atml_recv(struct tpm_chip *chip, u8 *buf, size_t count) dev_err(chip->dev, "Recv size(%d) less than available space\n", size); for (; i < size; i++) { /* clear the waiting data anyway */ - status = atmel_getb(chip, 1); + status = ioread8(chip->vendor->iobase + 1); if ((status & ATML_STATUS_DATA_AVAIL) == 0) { - dev_err(chip->dev, - "error reading data\n"); + dev_err(chip->dev, "error reading data\n"); return -EIO; } } @@ -76,17 +74,17 @@ static int tpm_atml_recv(struct tpm_chip *chip, u8 *buf, size_t count) /* read all the data available */ for (; i < size; i++) { - status = atmel_getb(chip, 1); + status = ioread8(chip->vendor->iobase + 1); if ((status & ATML_STATUS_DATA_AVAIL) == 0) { - dev_err(chip->dev, - "error reading data\n"); + dev_err(chip->dev, "error reading data\n"); return -EIO; } - *buf++ = atmel_getb(chip, 0); + *buf++ = ioread8(chip->vendor->iobase); } /* make sure data available is gone */ - status = atmel_getb(chip, 1); + status = ioread8(chip->vendor->iobase + 1); + if (status & ATML_STATUS_DATA_AVAIL) { dev_err(chip->dev, "data available is stuck\n"); return -EIO; @@ -102,7 +100,7 @@ static int tpm_atml_send(struct tpm_chip *chip, u8 *buf, size_t count) dev_dbg(chip->dev, "tpm_atml_send:\n"); for (i = 0; i < count; i++) { dev_dbg(chip->dev, "%d 0x%x(%d)\n", i, buf[i], buf[i]); - atmel_putb(buf[i], chip, 0); + iowrite8(buf[i], chip->vendor->iobase); } return count; @@ -110,12 +108,12 @@ static int tpm_atml_send(struct tpm_chip *chip, u8 *buf, size_t count) static void tpm_atml_cancel(struct tpm_chip *chip) { - atmel_putb(ATML_STATUS_ABORT, chip, 1); + iowrite8(ATML_STATUS_ABORT, chip->vendor->iobase + 1); } static u8 tpm_atml_status(struct tpm_chip *chip) { - return atmel_getb(chip, 1); + return ioread8(chip->vendor->iobase + 1); } static struct file_operations atmel_ops = { @@ -162,7 +160,8 @@ static void atml_plat_remove(void) if (chip) { if (chip->vendor->have_region) - atmel_release_region(chip->vendor->base, chip->vendor->region_size); + atmel_release_region(chip->vendor->base, + chip->vendor->region_size); atmel_put_base_addr(chip->vendor); tpm_remove_hardware(chip->dev); platform_device_unregister(pdev); @@ -183,14 +182,19 @@ static int __init init_atmel(void) driver_register(&atml_drv); - if (atmel_get_base_addr(&tpm_atmel) != 0) { + if ((tpm_atmel.iobase = atmel_get_base_addr(&tpm_atmel)) == NULL) { rc = -ENODEV; goto err_unreg_drv; } - tpm_atmel.have_region = (atmel_request_region( tpm_atmel.base, tpm_atmel.region_size, "tpm_atmel0") == NULL) ? 0 : 1; + tpm_atmel.have_region = + (atmel_request_region + (tpm_atmel.base, tpm_atmel.region_size, + "tpm_atmel0") == NULL) ? 0 : 1; - if (IS_ERR(pdev = platform_device_register_simple("tpm_atmel", -1, NULL, 0 ))) { + if (IS_ERR + (pdev = + platform_device_register_simple("tpm_atmel", -1, NULL, 0))) { rc = PTR_ERR(pdev); goto err_rel_reg; } @@ -202,9 +206,10 @@ static int __init init_atmel(void) err_unreg_dev: platform_device_unregister(pdev); err_rel_reg: - if (tpm_atmel.have_region) - atmel_release_region(tpm_atmel.base, tpm_atmel.region_size); atmel_put_base_addr(&tpm_atmel); + if (tpm_atmel.have_region) + atmel_release_region(tpm_atmel.base, + tpm_atmel.region_size); err_unreg_drv: driver_unregister(&atml_drv); return rc; diff --git a/drivers/char/tpm/tpm_atmel.h b/drivers/char/tpm/tpm_atmel.h index 3c5b9a8..d3478aa 100644 --- a/drivers/char/tpm/tpm_atmel.h +++ b/drivers/char/tpm/tpm_atmel.h @@ -27,12 +27,14 @@ #define atmel_putb(val, chip, offset) writeb(val, chip->vendor->iobase + offset) #define atmel_request_region request_mem_region #define atmel_release_region release_mem_region -static inline void atmel_put_base_addr(struct tpm_vendor_specific *vendor) + +static inline void atmel_put_base_addr(struct tpm_vendor_specific + *vendor) { iounmap(vendor->iobase); } -static int atmel_get_base_addr(struct tpm_vendor_specific *vendor) +static void __iomem * atmel_get_base_addr(struct tpm_vendor_specific *vendor) { struct device_node *dn; unsigned long address, size; @@ -44,11 +46,11 @@ static int atmel_get_base_addr(struct tpm_vendor_specific *vendor) dn = of_find_node_by_name(NULL, "tpm"); if (!dn) - return 1; + return NULL; if (!device_is_compatible(dn, "AT97SC3201")) { of_node_put(dn); - return 1; + return NULL; } reg = (unsigned int *) get_property(dn, "reg", ®len); @@ -71,8 +73,7 @@ static int atmel_get_base_addr(struct tpm_vendor_specific *vendor) vendor->base = address; vendor->region_size = size; - vendor->iobase = ioremap(address, size); - return 0; + return ioremap(vendor->base, vendor->region_size); } #else #define atmel_getb(chip, offset) inb(chip->vendor->base + offset) @@ -105,18 +106,19 @@ static int atmel_verify_tpm11(void) return 0; } -static inline void atmel_put_base_addr(struct tpm_vendor_specific *vendor) +static inline void atmel_put_base_addr(struct tpm_vendor_specific + *vendor) { } /* Determine where to talk to device */ -static unsigned long atmel_get_base_addr(struct tpm_vendor_specific +static void __iomem * atmel_get_base_addr(struct tpm_vendor_specific *vendor) { int lo, hi; if (atmel_verify_tpm11() != 0) - return 1; + return NULL; lo = tpm_read_index(TPM_ADDR, TPM_ATMEL_BASE_ADDR_LO); hi = tpm_read_index(TPM_ADDR, TPM_ATMEL_BASE_ADDR_HI); @@ -124,6 +126,6 @@ static unsigned long atmel_get_base_addr(struct tpm_vendor_specific vendor->base = (hi << 8) | lo; vendor->region_size = 2; - return 0; + return ioport_map(vendor->base, vendor->region_size); } #endif diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c index 5131530..252d55d 100644 --- a/drivers/md/bitmap.c +++ b/drivers/md/bitmap.c @@ -326,9 +326,9 @@ static int write_page(struct bitmap *bitmap, struct page *page, int wait) } } - ret = page->mapping->a_ops->prepare_write(NULL, page, 0, PAGE_SIZE); + ret = page->mapping->a_ops->prepare_write(bitmap->file, page, 0, PAGE_SIZE); if (!ret) - ret = page->mapping->a_ops->commit_write(NULL, page, 0, + ret = page->mapping->a_ops->commit_write(bitmap->file, page, 0, PAGE_SIZE); if (ret) { unlock_page(page); diff --git a/drivers/md/md.c b/drivers/md/md.c index f3fed66..78c7418 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -3846,11 +3846,20 @@ static int is_mddev_idle(mddev_t *mddev) curr_events = disk_stat_read(disk, sectors[0]) + disk_stat_read(disk, sectors[1]) - atomic_read(&disk->sync_io); - /* Allow some slack between valud of curr_events and last_events, - * as there are some uninteresting races. + /* The difference between curr_events and last_events + * will be affected by any new non-sync IO (making + * curr_events bigger) and any difference in the amount of + * in-flight syncio (making current_events bigger or smaller) + * The amount in-flight is currently limited to + * 32*64K in raid1/10 and 256*PAGE_SIZE in raid5/6 + * which is at most 4096 sectors. + * These numbers are fairly fragile and should be made + * more robust, probably by enforcing the + * 'window size' that md_do_sync sort-of uses. + * * Note: the following is an unsigned comparison. */ - if ((curr_events - rdev->last_events + 32) > 64) { + if ((curr_events - rdev->last_events + 4096) > 8192) { rdev->last_events = curr_events; idle = 0; } @@ -4109,7 +4118,7 @@ static void md_do_sync(mddev_t *mddev) if (currspeed > sysctl_speed_limit_min) { if ((currspeed > sysctl_speed_limit_max) || !is_mddev_idle(mddev)) { - msleep(250); + msleep(500); goto repeat; } } diff --git a/drivers/s390/char/raw3270.c b/drivers/s390/char/raw3270.c index f5b7d36..1026f2b 100644 --- a/drivers/s390/char/raw3270.c +++ b/drivers/s390/char/raw3270.c @@ -1179,12 +1179,12 @@ raw3270_create_attributes(struct raw3270 *rp) //FIXME: check return code sysfs_create_group(&rp->cdev->dev.kobj, &raw3270_attr_group); rp->clttydev = - class_device_create(class3270, + class_device_create(class3270, NULL, MKDEV(IBM_TTY3270_MAJOR, rp->minor), &rp->cdev->dev, "tty%s", rp->cdev->dev.bus_id); rp->cltubdev = - class_device_create(class3270, + class_device_create(class3270, NULL, MKDEV(IBM_FS3270_MAJOR, rp->minor), &rp->cdev->dev, "tub%s", rp->cdev->dev.bus_id); diff --git a/drivers/usb/host/ohci-ppc-soc.c b/drivers/usb/host/ohci-ppc-soc.c index 18755766..2ec6a78 100644 --- a/drivers/usb/host/ohci-ppc-soc.c +++ b/drivers/usb/host/ohci-ppc-soc.c @@ -185,7 +185,7 @@ static int ohci_hcd_ppc_soc_drv_probe(struct platform_device *pdev) static int ohci_hcd_ppc_soc_drv_remove(struct platform_device *pdev) { - struct usb_hcd *hcd = platform_get_drvdata(dev); + struct usb_hcd *hcd = platform_get_drvdata(pdev); usb_hcd_ppc_soc_remove(hcd, pdev); return 0; diff --git a/drivers/video/offb.c b/drivers/video/offb.c index 2c85683..00d87f5 100644 --- a/drivers/video/offb.c +++ b/drivers/video/offb.c @@ -26,6 +26,7 @@ #include <linux/fb.h> #include <linux/init.h> #include <linux/ioport.h> +#include <linux/pci.h> #include <asm/io.h> #include <asm/prom.h> @@ -325,8 +326,8 @@ static void __init offb_init_nodriver(struct device_node *dp) int *pp, i; unsigned int len; int width = 640, height = 480, depth = 8, pitch; - unsigned *up; - unsigned long address; + unsigned int rsize, *up; + unsigned long address = 0; if ((pp = (int *) get_property(dp, "depth", &len)) != NULL && len == sizeof(int)) @@ -344,10 +345,40 @@ static void __init offb_init_nodriver(struct device_node *dp) pitch = 0x1000; } else pitch = width; - if ((up = (unsigned *) get_property(dp, "address", &len)) != NULL - && len == sizeof(unsigned)) + + rsize = (unsigned long)pitch * (unsigned long)height * + (unsigned long)(depth / 8); + + /* Try to match device to a PCI device in order to get a properly + * translated address rather then trying to decode the open firmware + * stuff in various incorrect ways + */ +#ifdef CONFIG_PCI + /* First try to locate the PCI device if any */ + { + struct pci_dev *pdev = NULL; + + for_each_pci_dev(pdev) { + if (dp == pci_device_to_OF_node(pdev)) + break; + } + if (pdev) { + for (i = 0; i < 6 && address == 0; i++) { + if ((pci_resource_flags(pdev, i) & + IORESOURCE_MEM) && + (pci_resource_len(pdev, i) >= rsize)) + address = pci_resource_start(pdev, i); + } + pci_dev_put(pdev); + } + } +#endif /* CONFIG_PCI */ + + if (address == 0 && + (up = (unsigned *) get_property(dp, "address", &len)) != NULL && + len == sizeof(unsigned)) address = (u_long) * up; - else { + if (address == 0) { for (i = 0; i < dp->n_addrs; ++i) if (dp->addrs[i].size >= pitch * height * depth / 8) diff --git a/include/asm-powerpc/cputable.h b/include/asm-powerpc/cputable.h index 04e2726..d1cfa3f 100644 --- a/include/asm-powerpc/cputable.h +++ b/include/asm-powerpc/cputable.h @@ -90,6 +90,7 @@ extern void do_cpu_ftr_fixups(unsigned long offset); #define CPU_FTR_NEED_COHERENT ASM_CONST(0x0000000000020000) #define CPU_FTR_NO_BTIC ASM_CONST(0x0000000000040000) #define CPU_FTR_BIG_PHYS ASM_CONST(0x0000000000080000) +#define CPU_FTR_NODSISRALIGN ASM_CONST(0x0000000000100000) #ifdef __powerpc64__ /* Add the 64b processor unique features in the top half of the word */ @@ -97,7 +98,6 @@ extern void do_cpu_ftr_fixups(unsigned long offset); #define CPU_FTR_16M_PAGE ASM_CONST(0x0000000200000000) #define CPU_FTR_TLBIEL ASM_CONST(0x0000000400000000) #define CPU_FTR_NOEXECUTE ASM_CONST(0x0000000800000000) -#define CPU_FTR_NODSISRALIGN ASM_CONST(0x0000001000000000) #define CPU_FTR_IABR ASM_CONST(0x0000002000000000) #define CPU_FTR_MMCRA ASM_CONST(0x0000004000000000) #define CPU_FTR_CTRL ASM_CONST(0x0000008000000000) @@ -113,7 +113,6 @@ extern void do_cpu_ftr_fixups(unsigned long offset); #define CPU_FTR_16M_PAGE ASM_CONST(0x0) #define CPU_FTR_TLBIEL ASM_CONST(0x0) #define CPU_FTR_NOEXECUTE ASM_CONST(0x0) -#define CPU_FTR_NODSISRALIGN ASM_CONST(0x0) #define CPU_FTR_IABR ASM_CONST(0x0) #define CPU_FTR_MMCRA ASM_CONST(0x0) #define CPU_FTR_CTRL ASM_CONST(0x0) @@ -273,18 +272,21 @@ enum { CPU_FTRS_POWER3_32 = CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE, CPU_FTRS_POWER4_32 = CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE | - CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE, + CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_NODSISRALIGN, CPU_FTRS_970_32 = CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_ALTIVEC_COMP | - CPU_FTR_MAYBE_CAN_NAP, + CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_NODSISRALIGN, CPU_FTRS_8XX = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB, - CPU_FTRS_40X = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB, - CPU_FTRS_44X = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB, - CPU_FTRS_E200 = CPU_FTR_USE_TB, - CPU_FTRS_E500 = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB, + CPU_FTRS_40X = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | + CPU_FTR_NODSISRALIGN, + CPU_FTRS_44X = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | + CPU_FTR_NODSISRALIGN, + CPU_FTRS_E200 = CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN, + CPU_FTRS_E500 = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | + CPU_FTR_NODSISRALIGN, CPU_FTRS_E500_2 = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | - CPU_FTR_BIG_PHYS, - CPU_FTRS_GENERIC_32 = CPU_FTR_COMMON, + CPU_FTR_BIG_PHYS | CPU_FTR_NODSISRALIGN, + CPU_FTRS_GENERIC_32 = CPU_FTR_COMMON | CPU_FTR_NODSISRALIGN, #ifdef __powerpc64__ CPU_FTRS_POWER3 = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_IABR, diff --git a/include/asm-powerpc/delay.h b/include/asm-powerpc/delay.h index 1492aa9..54fe1f4 100644 --- a/include/asm-powerpc/delay.h +++ b/include/asm-powerpc/delay.h @@ -13,43 +13,7 @@ * Anton Blanchard. */ -extern unsigned long tb_ticks_per_usec; - -#ifdef CONFIG_PPC64 -/* define these here to prevent circular dependencies */ -/* these instructions control the thread priority on multi-threaded cpus */ -#define __HMT_low() asm volatile("or 1,1,1") -#define __HMT_medium() asm volatile("or 2,2,2") -#else -#define __HMT_low() -#define __HMT_medium() -#endif - -#define __barrier() asm volatile("" ::: "memory") - -static inline unsigned long __get_tb(void) -{ - unsigned long rval; - - asm volatile("mftb %0" : "=r" (rval)); - return rval; -} - -static inline void __delay(unsigned long loops) -{ - unsigned long start = __get_tb(); - - while((__get_tb() - start) < loops) - __HMT_low(); - __HMT_medium(); - __barrier(); -} - -static inline void udelay(unsigned long usecs) -{ - unsigned long loops = tb_ticks_per_usec * usecs; - - __delay(loops); -} +extern void __delay(unsigned long loops); +extern void udelay(unsigned long usecs); #endif /* _ASM_POWERPC_DELAY_H */ diff --git a/include/asm-powerpc/eeh.h b/include/asm-powerpc/eeh.h index 89f26ab..f8633aa 100644 --- a/include/asm-powerpc/eeh.h +++ b/include/asm-powerpc/eeh.h @@ -30,6 +30,8 @@ struct device_node; #ifdef CONFIG_EEH +extern int eeh_subsystem_enabled; + /* Values for eeh_mode bits in device_node */ #define EEH_MODE_SUPPORTED (1<<0) #define EEH_MODE_NOCHECK (1<<1) @@ -75,7 +77,7 @@ void eeh_remove_device(struct pci_dev *); * If this macro yields TRUE, the caller relays to eeh_check_failure() * which does further tests out of line. */ -#define EEH_POSSIBLE_ERROR(val, type) ((val) == (type)~0) +#define EEH_POSSIBLE_ERROR(val, type) ((val) == (type)~0 && eeh_subsystem_enabled) /* * Reads from a device which has been isolated by EEH will return diff --git a/include/asm-powerpc/page_64.h b/include/asm-powerpc/page_64.h index c16f106..1e6e784 100644 --- a/include/asm-powerpc/page_64.h +++ b/include/asm-powerpc/page_64.h @@ -86,7 +86,11 @@ static inline void copy_page(void *to, void *from) extern u64 ppc64_pft_size; /* Large pages size */ +#ifdef CONFIG_HUGETLB_PAGE extern unsigned int HPAGE_SHIFT; +#else +#define HPAGE_SHIFT PAGE_SHIFT +#endif #define HPAGE_SIZE ((1UL) << HPAGE_SHIFT) #define HPAGE_MASK (~(HPAGE_SIZE - 1)) #define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT) diff --git a/include/asm-powerpc/topology.h b/include/asm-powerpc/topology.h index 015d287..db8095c 100644 --- a/include/asm-powerpc/topology.h +++ b/include/asm-powerpc/topology.h @@ -41,6 +41,10 @@ static inline int node_to_first_cpu(int node) .cache_hot_time = (10*1000000), \ .cache_nice_tries = 1, \ .per_cpu_gain = 100, \ + .busy_idx = 3, \ + .idle_idx = 1, \ + .newidle_idx = 2, \ + .wake_idx = 1, \ .flags = SD_LOAD_BALANCE \ | SD_BALANCE_EXEC \ | SD_BALANCE_NEWIDLE \ diff --git a/include/asm-ppc/cpm2.h b/include/asm-ppc/cpm2.h index 43d2ebb..b638b87 100644 --- a/include/asm-ppc/cpm2.h +++ b/include/asm-ppc/cpm2.h @@ -1091,5 +1091,7 @@ typedef struct im_idma { #define CPM_IMMR_OFFSET 0x101a8 #endif +#define FCC_PSMR_RMII ((uint)0x00020000) /* Use RMII interface */ + #endif /* __CPM2__ */ #endif /* __KERNEL__ */ diff --git a/kernel/rcutorture.c b/kernel/rcutorture.c index eb6719c..88c28d4 100644 --- a/kernel/rcutorture.c +++ b/kernel/rcutorture.c @@ -80,6 +80,7 @@ struct rcu_torture { struct rcu_head rtort_rcu; int rtort_pipe_count; struct list_head rtort_free; + int rtort_mbtest; }; static int fullstop = 0; /* stop generating callbacks at test end. */ @@ -96,6 +97,8 @@ static atomic_t rcu_torture_wcount[RCU_TORTURE_PIPE_LEN + 1]; atomic_t n_rcu_torture_alloc; atomic_t n_rcu_torture_alloc_fail; atomic_t n_rcu_torture_free; +atomic_t n_rcu_torture_mberror; +atomic_t n_rcu_torture_error; /* * Allocate an element from the rcu_tortures pool. @@ -145,9 +148,10 @@ rcu_torture_cb(struct rcu_head *p) if (i > RCU_TORTURE_PIPE_LEN) i = RCU_TORTURE_PIPE_LEN; atomic_inc(&rcu_torture_wcount[i]); - if (++rp->rtort_pipe_count >= RCU_TORTURE_PIPE_LEN) + if (++rp->rtort_pipe_count >= RCU_TORTURE_PIPE_LEN) { + rp->rtort_mbtest = 0; rcu_torture_free(rp); - else + } else call_rcu(p, rcu_torture_cb); } @@ -206,6 +210,7 @@ rcu_torture_writer(void *arg) rp->rtort_pipe_count = 0; udelay(rcu_random(&rand) & 0x3ff); old_rp = rcu_torture_current; + rp->rtort_mbtest = 1; rcu_assign_pointer(rcu_torture_current, rp); smp_wmb(); if (old_rp != NULL) { @@ -252,6 +257,8 @@ rcu_torture_reader(void *arg) schedule_timeout_interruptible(HZ); continue; } + if (p->rtort_mbtest == 0) + atomic_inc(&n_rcu_torture_mberror); udelay(rcu_random(&rand) & 0x7f); preempt_disable(); pipe_count = p->rtort_pipe_count; @@ -300,16 +307,22 @@ rcu_torture_printk(char *page) } cnt += sprintf(&page[cnt], "rcutorture: "); cnt += sprintf(&page[cnt], - "rtc: %p ver: %ld tfle: %d rta: %d rtaf: %d rtf: %d", + "rtc: %p ver: %ld tfle: %d rta: %d rtaf: %d rtf: %d " + "rtmbe: %d", rcu_torture_current, rcu_torture_current_version, list_empty(&rcu_torture_freelist), atomic_read(&n_rcu_torture_alloc), atomic_read(&n_rcu_torture_alloc_fail), - atomic_read(&n_rcu_torture_free)); + atomic_read(&n_rcu_torture_free), + atomic_read(&n_rcu_torture_mberror)); + if (atomic_read(&n_rcu_torture_mberror) != 0) + cnt += sprintf(&page[cnt], " !!!"); cnt += sprintf(&page[cnt], "\nrcutorture: "); - if (i > 1) + if (i > 1) { cnt += sprintf(&page[cnt], "!!! "); + atomic_inc(&n_rcu_torture_error); + } cnt += sprintf(&page[cnt], "Reader Pipe: "); for (i = 0; i < RCU_TORTURE_PIPE_LEN + 1; i++) cnt += sprintf(&page[cnt], " %ld", pipesummary[i]); @@ -400,7 +413,9 @@ rcu_torture_cleanup(void) for (i = 0; i < RCU_TORTURE_PIPE_LEN; i++) synchronize_rcu(); rcu_torture_stats_print(); /* -After- the stats thread is stopped! */ - PRINTK_STRING("--- End of test"); + printk(KERN_ALERT TORTURE_FLAG + "--- End of test: %s\n", + atomic_read(&n_rcu_torture_error) == 0 ? "SUCCESS" : "FAILURE"); } static int @@ -425,6 +440,7 @@ rcu_torture_init(void) INIT_LIST_HEAD(&rcu_torture_freelist); for (i = 0; i < sizeof(rcu_tortures) / sizeof(rcu_tortures[0]); i++) { + rcu_tortures[i].rtort_mbtest = 0; list_add_tail(&rcu_tortures[i].rtort_free, &rcu_torture_freelist); } @@ -436,6 +452,8 @@ rcu_torture_init(void) atomic_set(&n_rcu_torture_alloc, 0); atomic_set(&n_rcu_torture_alloc_fail, 0); atomic_set(&n_rcu_torture_free, 0); + atomic_set(&n_rcu_torture_mberror, 0); + atomic_set(&n_rcu_torture_error, 0); for (i = 0; i < RCU_TORTURE_PIPE_LEN + 1; i++) atomic_set(&rcu_torture_wcount[i], 0); for_each_cpu(cpu) { diff --git a/mm/page-writeback.c b/mm/page-writeback.c index 74138c9..0166ea15 100644 --- a/mm/page-writeback.c +++ b/mm/page-writeback.c @@ -750,6 +750,7 @@ int clear_page_dirty_for_io(struct page *page) } return TestClearPageDirty(page); } +EXPORT_SYMBOL(clear_page_dirty_for_io); int test_clear_page_writeback(struct page *page) { |
