diff options
| -rw-r--r-- | Documentation/hwmon/menf21bmc | 50 | ||||
| -rw-r--r-- | drivers/hwmon/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/hwmon/Makefile | 1 | ||||
| -rw-r--r-- | drivers/hwmon/menf21bmc_hwmon.c | 230 | ||||
| -rw-r--r-- | drivers/leds/Kconfig | 9 | ||||
| -rw-r--r-- | drivers/leds/Makefile | 1 | ||||
| -rw-r--r-- | drivers/leds/leds-menf21bmc.c | 131 | ||||
| -rw-r--r-- | drivers/mfd/Kconfig | 15 | ||||
| -rw-r--r-- | drivers/mfd/Makefile | 1 | ||||
| -rw-r--r-- | drivers/mfd/menf21bmc.c | 132 | ||||
| -rw-r--r-- | drivers/watchdog/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/watchdog/Makefile | 1 | ||||
| -rw-r--r-- | drivers/watchdog/menf21bmc_wdt.c | 203 |
13 files changed, 794 insertions, 0 deletions
diff --git a/Documentation/hwmon/menf21bmc b/Documentation/hwmon/menf21bmc new file mode 100644 index 0000000..2a273a0 --- /dev/null +++ b/Documentation/hwmon/menf21bmc @@ -0,0 +1,50 @@ +Kernel driver menf21bmc_hwmon +============================= + +Supported chips: + * MEN 14F021P00 + Prefix: 'menf21bmc_hwmon' + Adresses scanned: - + +Author: Andreas Werner <andreas.werner@men.de> + +Description +----------- + +The menf21bmc is a Board Management Controller (BMC) which provides an I2C +interface to the host to access the features implemented in the BMC. + +This driver gives access to the voltage monitoring feature of the main +voltages of the board. +The voltage sensors are connected to the ADC inputs of the BMC which is +a PIC16F917 Mikrocontroller. + +Usage Notes +----------- + +This driver is part of the MFD driver named "menf21bmc" and does +not auto-detect devices. +You will have to instantiate the MFD driver explicitly. +Please see Documentation/i2c/instantiating-devices for +details. + +Sysfs entries +------------- + +The following attributes are supported. All attributes are read only +The Limits are read once by the driver. + +in0_input +3.3V input voltage +in1_input +5.0V input voltage +in2_input +12.0V input voltage +in3_input +5V Standby input voltage +in4_input VBAT (on board battery) + +in[0-4]_min Minimum voltage limit +in[0-4]_max Maximum voltage limit + +in0_label "MON_3_3V" +in1_label "MON_5V" +in2_label "MON_12V" +in3_label "5V_STANDBY" +in4_label "VBAT" diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index f790b41..5286d7c 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -839,6 +839,16 @@ config SENSORS_MCP3021 This driver can also be built as a module. If so, the module will be called mcp3021. +config SENSORS_MENF21BMC_HWMON + tristate "MEN 14F021P00 BMC Hardware Monitoring" + depends on MFD_MENF21BMC + help + Say Y here to include support for the MEN 14F021P00 BMC + hardware monitoring. + + This driver can also be built as a module. If so the module + will be called menf21bmc_hwmon. + config SENSORS_ADCXX tristate "National Semiconductor ADCxxxSxxx" depends on SPI_MASTER diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index be28152..c90a761 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -115,6 +115,7 @@ obj-$(CONFIG_SENSORS_MAX6650) += max6650.o obj-$(CONFIG_SENSORS_MAX6697) += max6697.o obj-$(CONFIG_SENSORS_MC13783_ADC)+= mc13783-adc.o obj-$(CONFIG_SENSORS_MCP3021) += mcp3021.o +obj-$(CONFIG_SENSORS_MENF21BMC_HWMON) += menf21bmc_hwmon.o obj-$(CONFIG_SENSORS_NCT6683) += nct6683.o obj-$(CONFIG_SENSORS_NCT6775) += nct6775.o obj-$(CONFIG_SENSORS_NTC_THERMISTOR) += ntc_thermistor.o diff --git a/drivers/hwmon/menf21bmc_hwmon.c b/drivers/hwmon/menf21bmc_hwmon.c new file mode 100644 index 0000000..c92229d --- /dev/null +++ b/drivers/hwmon/menf21bmc_hwmon.c @@ -0,0 +1,230 @@ +/* + * MEN 14F021P00 Board Management Controller (BMC) hwmon driver. + * + * This is the core hwmon driver of the MEN 14F021P00 BMC. + * The BMC monitors the board voltages which can be access with this + * driver through sysfs. + * + * Copyright (C) 2014 MEN Mikro Elektronik Nuernberg GmbH + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/jiffies.h> +#include <linux/slab.h> +#include <linux/i2c.h> + +#define DRV_NAME "menf21bmc_hwmon" + +#define BMC_VOLT_COUNT 5 +#define MENF21BMC_V33 0 +#define MENF21BMC_V5 1 +#define MENF21BMC_V12 2 +#define MENF21BMC_V5_SB 3 +#define MENF21BMC_VBAT 4 + +#define IDX_TO_VOLT_MIN_CMD(idx) (0x40 + idx) +#define IDX_TO_VOLT_MAX_CMD(idx) (0x50 + idx) +#define IDX_TO_VOLT_INP_CMD(idx) (0x60 + idx) + +struct menf21bmc_hwmon { + bool valid; + struct i2c_client *i2c_client; + unsigned long last_update; + int in_val[BMC_VOLT_COUNT]; + int in_min[BMC_VOLT_COUNT]; + int in_max[BMC_VOLT_COUNT]; +}; + +static const char *const input_names[] = { + [MENF21BMC_V33] = "MON_3_3V", + [MENF21BMC_V5] = "MON_5V", + [MENF21BMC_V12] = "MON_12V", + [MENF21BMC_V5_SB] = "5V_STANDBY", + [MENF21BMC_VBAT] = "VBAT" +}; + +static struct menf21bmc_hwmon *menf21bmc_hwmon_update(struct device *dev) +{ + int i; + int val; + struct menf21bmc_hwmon *drv_data = dev_get_drvdata(dev); + struct menf21bmc_hwmon *data_ret = drv_data; + + if (time_after(jiffies, drv_data->last_update + HZ) + || !drv_data->valid) { + for (i = 0; i < BMC_VOLT_COUNT; i++) { + val = i2c_smbus_read_word_data(drv_data->i2c_client, + IDX_TO_VOLT_INP_CMD(i)); + if (val < 0) { + data_ret = ERR_PTR(val); + goto abort; + } + drv_data->in_val[i] = val; + } + drv_data->last_update = jiffies; + drv_data->valid = true; + } +abort: + return data_ret; +} + +static int menf21bmc_hwmon_get_volt_limits(struct menf21bmc_hwmon *drv_data) +{ + int i, val; + + for (i = 0; i < BMC_VOLT_COUNT; i++) { + val = i2c_smbus_read_word_data(drv_data->i2c_client, + IDX_TO_VOLT_MIN_CMD(i)); + if (val < 0) + return val; + + drv_data->in_min[i] = val; + + val = i2c_smbus_read_word_data(drv_data->i2c_client, + IDX_TO_VOLT_MAX_CMD(i)); + if (val < 0) + return val; + + drv_data->in_max[i] = val; + } + return 0; +} + +static ssize_t +show_label(struct device *dev, struct device_attribute *devattr, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + + return sprintf(buf, "%s\n", input_names[attr->index]); +} + +static ssize_t +show_in(struct device *dev, struct device_attribute *devattr, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct menf21bmc_hwmon *drv_data = menf21bmc_hwmon_update(dev); + + if (IS_ERR(drv_data)) + return PTR_ERR(drv_data); + + return sprintf(buf, "%d\n", drv_data->in_val[attr->index]); +} + +static ssize_t +show_min(struct device *dev, struct device_attribute *devattr, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct menf21bmc_hwmon *drv_data = dev_get_drvdata(dev); + + return sprintf(buf, "%d\n", drv_data->in_min[attr->index]); +} + +static ssize_t +show_max(struct device *dev, struct device_attribute *devattr, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct menf21bmc_hwmon *drv_data = dev_get_drvdata(dev); + + return sprintf(buf, "%d\n", drv_data->in_max[attr->index]); +} + +#define create_voltage_sysfs(idx) \ +static SENSOR_DEVICE_ATTR(in##idx##_input, S_IRUGO, \ + show_in, NULL, idx); \ +static SENSOR_DEVICE_ATTR(in##idx##_min, S_IRUGO, \ + show_min, NULL, idx); \ +static SENSOR_DEVICE_ATTR(in##idx##_max, S_IRUGO, \ + show_max, NULL, idx); \ +static SENSOR_DEVICE_ATTR(in##idx##_label, S_IRUGO, \ + show_label, NULL, idx); + +create_voltage_sysfs(0); +create_voltage_sysfs(1); +create_voltage_sysfs(2); +create_voltage_sysfs(3); +create_voltage_sysfs(4); + +static struct attribute *menf21bmc_hwmon_attrs[] = { + &sensor_dev_attr_in0_input.dev_attr.attr, + &sensor_dev_attr_in0_min.dev_attr.attr, + &sensor_dev_attr_in0_max.dev_attr.attr, + &sensor_dev_attr_in0_label.dev_attr.attr, + + &sensor_dev_attr_in1_input.dev_attr.attr, + &sensor_dev_attr_in1_min.dev_attr.attr, + &sensor_dev_attr_in1_max.dev_attr.attr, + &sensor_dev_attr_in1_label.dev_attr.attr, + + &sensor_dev_attr_in2_input.dev_attr.attr, + &sensor_dev_attr_in2_min.dev_attr.attr, + &sensor_dev_attr_in2_max.dev_attr.attr, + &sensor_dev_attr_in2_label.dev_attr.attr, + + &sensor_dev_attr_in3_input.dev_attr.attr, + &sensor_dev_attr_in3_min.dev_attr.attr, + &sensor_dev_attr_in3_max.dev_attr.attr, + &sensor_dev_attr_in3_label.dev_attr.attr, + + &sensor_dev_attr_in4_input.dev_attr.attr, + &sensor_dev_attr_in4_min.dev_attr.attr, + &sensor_dev_attr_in4_max.dev_attr.attr, + &sensor_dev_attr_in4_label.dev_attr.attr, + NULL +}; + +ATTRIBUTE_GROUPS(menf21bmc_hwmon); + +static int menf21bmc_hwmon_probe(struct platform_device *pdev) +{ + int ret; + struct menf21bmc_hwmon *drv_data; + struct i2c_client *i2c_client = to_i2c_client(pdev->dev.parent); + struct device *hwmon_dev; + + drv_data = devm_kzalloc(&pdev->dev, sizeof(struct menf21bmc_hwmon), + GFP_KERNEL); + if (!drv_data) + return -ENOMEM; + + drv_data->i2c_client = i2c_client; + + ret = menf21bmc_hwmon_get_volt_limits(drv_data); + if (ret) { + dev_err(&pdev->dev, "failed to read sensor limits"); + return ret; + } + + hwmon_dev = devm_hwmon_device_register_with_groups(&pdev->dev, + "menf21bmc", drv_data, + menf21bmc_hwmon_groups); + if (IS_ERR(hwmon_dev)) + return PTR_ERR(hwmon_dev); + + dev_info(&pdev->dev, "MEN 14F021P00 BMC hwmon device enabled"); + + return 0; +} + +static struct platform_driver menf21bmc_hwmon = { + .probe = menf21bmc_hwmon_probe, + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, +}; + +module_platform_driver(menf21bmc_hwmon); + +MODULE_AUTHOR("Andreas Werner <andreas.werner@men.de>"); +MODULE_DESCRIPTION("MEN 14F021P00 BMC hwmon"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:menf21bmc_hwmon"); diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index 8c96e2d..eadd56c 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -468,6 +468,15 @@ config LEDS_OT200 This option enables support for the LEDs on the Bachmann OT200. Say Y to enable LEDs on the Bachmann OT200. +config LEDS_MENF21BMC + tristate "LED support for the MEN 14F021P00 BMC" + depends on LEDS_CLASS && MFD_MENF21BMC + help + Say Y here to include support for the MEN 14F021P00 BMC LEDs. + + This driver can also be built as a module. If so the module + will be called leds-menf21bmc. + comment "LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)" config LEDS_BLINKM diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index d8cc5f2..9a72fdd 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -54,6 +54,7 @@ obj-$(CONFIG_LEDS_MAX8997) += leds-max8997.o obj-$(CONFIG_LEDS_LM355x) += leds-lm355x.o obj-$(CONFIG_LEDS_BLINKM) += leds-blinkm.o obj-$(CONFIG_LEDS_VERSATILE) += leds-versatile.o +obj-$(CONFIG_LEDS_MENF21BMC) += leds-menf21bmc.o # LED SPI Drivers obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o diff --git a/drivers/leds/leds-menf21bmc.c b/drivers/leds/leds-menf21bmc.c new file mode 100644 index 0000000..89dd577 --- /dev/null +++ b/drivers/leds/leds-menf21bmc.c @@ -0,0 +1,131 @@ +/* + * MEN 14F021P00 Board Management Controller (BMC) LEDs Driver. + * + * This is the core LED driver of the MEN 14F021P00 BMC. + * There are four LEDs available which can be switched on and off. + * STATUS LED, HOT SWAP LED, USER LED 1, USER LED 2 + * + * Copyright (C) 2014 MEN Mikro Elektronik Nuernberg GmbH + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/leds.h> +#include <linux/i2c.h> + +#define BMC_CMD_LED_GET_SET 0xA0 +#define BMC_BIT_LED_STATUS BIT(0) +#define BMC_BIT_LED_HOTSWAP BIT(1) +#define BMC_BIT_LED_USER1 BIT(2) +#define BMC_BIT_LED_USER2 BIT(3) + +struct menf21bmc_led { + struct led_classdev cdev; + u8 led_bit; + const char *name; + struct i2c_client *i2c_client; +}; + +static struct menf21bmc_led leds[] = { + { + .name = "menf21bmc:led_status", + .led_bit = BMC_BIT_LED_STATUS, + }, + { + .name = "menf21bmc:led_hotswap", + .led_bit = BMC_BIT_LED_HOTSWAP, + }, + { + .name = "menf21bmc:led_user1", + .led_bit = BMC_BIT_LED_USER1, + }, + { + .name = "menf21bmc:led_user2", + .led_bit = BMC_BIT_LED_USER2, + } +}; + +static DEFINE_MUTEX(led_lock); + +static void +menf21bmc_led_set(struct led_classdev *led_cdev, enum led_brightness value) +{ + int led_val; + struct menf21bmc_led *led = container_of(led_cdev, + struct menf21bmc_led, cdev); + + mutex_lock(&led_lock); + led_val = i2c_smbus_read_byte_data(led->i2c_client, + BMC_CMD_LED_GET_SET); + if (led_val < 0) + goto err_out; + + if (value == LED_OFF) + led_val &= ~led->led_bit; + else + led_val |= led->led_bit; + + i2c_smbus_write_byte_data(led->i2c_client, + BMC_CMD_LED_GET_SET, led_val); +err_out: + mutex_unlock(&led_lock); +} + +static int menf21bmc_led_probe(struct platform_device *pdev) +{ + int i; + int ret; + struct i2c_client *i2c_client = to_i2c_client(pdev->dev.parent); + + for (i = 0; i < ARRAY_SIZE(leds); i++) { + leds[i].cdev.name = leds[i].name; + leds[i].cdev.brightness_set = menf21bmc_led_set; + leds[i].i2c_client = i2c_client; + ret = led_classdev_register(&pdev->dev, &leds[i].cdev); + if (ret < 0) + goto err_free_leds; + } + dev_info(&pdev->dev, "MEN 140F21P00 BMC LED device enabled\n"); + + return 0; + +err_free_leds: + dev_err(&pdev->dev, "failed to register LED device\n"); + + for (i = i - 1; i >= 0; i--) + led_classdev_unregister(&leds[i].cdev); + + return ret; +} + +static int menf21bmc_led_remove(struct platform_device *pdev) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(leds); i++) + led_classdev_unregister(&leds[i].cdev); + + return 0; +} + +static struct platform_driver menf21bmc_led = { + .probe = menf21bmc_led_probe, + .remove = menf21bmc_led_remove, + .driver = { + .name = "menf21bmc_led", + .owner = THIS_MODULE, + }, +}; + +module_platform_driver(menf21bmc_led); + +MODULE_AUTHOR("Andreas Werner <andreas.werner@men.de>"); +MODULE_DESCRIPTION("MEN 14F021P00 BMC led driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:menf21bmc_led"); diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index de5abf2..cf66ef1 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -454,6 +454,21 @@ config MFD_MAX8998 additional drivers must be enabled in order to use the functionality of the device. +config MFD_MENF21BMC + tristate "MEN 14F021P00 Board Management Controller Support" + depends on I2C + select MFD_CORE + help + Say yes here to add support for the MEN 14F021P00 BMC + which is a Board Management Controller connected to the I2C bus. + The device supports multiple sub-devices like LED, HWMON and WDT. + This driver provides common support for accessing the devices; + additional drivers must be enabled in order to use the + functionality of the BMC device. + + This driver can also be built as a module. If so the module + will be called menf21bmc. + config EZX_PCAP bool "Motorola EZXPCAP Support" depends on SPI_MASTER diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index f001487..d58068a 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -169,6 +169,7 @@ obj-$(CONFIG_MFD_AS3711) += as3711.o obj-$(CONFIG_MFD_AS3722) += as3722.o obj-$(CONFIG_MFD_STW481X) += stw481x.o obj-$(CONFIG_MFD_IPAQ_MICRO) += ipaq-micro.o +obj-$(CONFIG_MFD_MENF21BMC) += menf21bmc.o intel-soc-pmic-objs := intel_soc_pmic_core.o intel_soc_pmic_crc.o obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o diff --git a/drivers/mfd/menf21bmc.c b/drivers/mfd/menf21bmc.c new file mode 100644 index 0000000..1c27434 --- /dev/null +++ b/drivers/mfd/menf21bmc.c @@ -0,0 +1,132 @@ +/* + * MEN 14F021P00 Board Management Controller (BMC) MFD Core Driver. + * + * Copyright (C) 2014 MEN Mikro Elektronik Nuernberg GmbH + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/mfd/core.h> + +#define BMC_CMD_WDT_EXIT_PROD 0x18 +#define BMC_CMD_WDT_PROD_STAT 0x19 +#define BMC_CMD_REV_MAJOR 0x80 +#define BMC_CMD_REV_MINOR 0x81 +#define BMC_CMD_REV_MAIN 0x82 + +static struct mfd_cell menf21bmc_cell[] = { + { .name = "menf21bmc_wdt", }, + { .name = "menf21bmc_led", }, + { .name = "menf21bmc_hwmon", } +}; + +static int menf21bmc_wdt_exit_prod_mode(struct i2c_client *client) +{ + int val, ret; + + val = i2c_smbus_read_byte_data(client, BMC_CMD_WDT_PROD_STAT); + if (val < 0) + return val; + + /* + * Production mode should be not active after delivery of the Board. + * To be sure we check it, inform the user and exit the mode + * if active. + */ + if (val == 0x00) { + dev_info(&client->dev, + "BMC in production mode. Exit production mode\n"); + + ret = i2c_smbus_write_byte(client, BMC_CMD_WDT_EXIT_PROD); + if (ret < 0) + return ret; + } + + return 0; +} + +static int +menf21bmc_probe(struct i2c_client *client, const struct i2c_device_id *ids) +{ + int rev_major, rev_minor, rev_main; + int ret; + + ret = i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA | + I2C_FUNC_SMBUS_WORD_DATA | + I2C_FUNC_SMBUS_BYTE); + if (!ret) + return -ENODEV; + + rev_major = i2c_smbus_read_word_data(client, BMC_CMD_REV_MAJOR); + if (rev_major < 0) { + dev_err(&client->dev, "failed to get BMC major revision\n"); + return rev_major; + } + + rev_minor = i2c_smbus_read_word_data(client, BMC_CMD_REV_MINOR); + if (rev_minor < 0) { + dev_err(&client->dev, "failed to get BMC minor revision\n"); + return rev_minor; + } + + rev_main = i2c_smbus_read_word_data(client, BMC_CMD_REV_MAIN); + if (rev_main < 0) { + dev_err(&client->dev, "failed to get BMC main revision\n"); + return rev_main; + } + + dev_info(&client->dev, "FW Revision: %02d.%02d.%02d\n", + rev_major, rev_minor, rev_main); + + /* + * We have to exit the Production Mode of the BMC to activate the + * Watchdog functionality and the BIOS life sign monitoring. + */ + ret = menf21bmc_wdt_exit_prod_mode(client); + if (ret < 0) { + dev_err(&client->dev, "failed to leave production mode\n"); + return ret; + } + + ret = mfd_add_devices(&client->dev, 0, menf21bmc_cell, + ARRAY_SIZE(menf21bmc_cell), NULL, 0, NULL); + if (ret < 0) { + dev_err(&client->dev, "failed to add BMC sub-devices\n"); + return ret; + } + + return 0; +} + +static int menf21bmc_remove(struct i2c_client *client) +{ + mfd_remove_devices(&client->dev); + return 0; +} + +static const struct i2c_device_id menf21bmc_id_table[] = { + { "menf21bmc" }, + { } +}; +MODULE_DEVICE_TABLE(i2c, menf21bmc_id_table); + +static struct i2c_driver menf21bmc_driver = { + .driver.name = "menf21bmc", + .id_table = menf21bmc_id_table, + .probe = menf21bmc_probe, + .remove = menf21bmc_remove, +}; + +module_i2c_driver(menf21bmc_driver); + +MODULE_DESCRIPTION("MEN 14F021P00 BMC mfd core driver"); +MODULE_AUTHOR("Andreas Werner <andreas.werner@men.de>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index f57312f..a50828e 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -95,6 +95,16 @@ config GPIO_WATCHDOG If you say yes here you get support for watchdog device controlled through GPIO-line. +config MENF21BMC_WATCHDOG + tristate "MEN 14F021P00 BMC Watchdog" + depends on MFD_MENF21BMC + select WATCHDOG_CORE + help + Say Y here to include support for the MEN 14F021P00 BMC Watchdog. + + This driver can also be built as a module. If so the module + will be called menf21bmc_wdt. + config WM831X_WATCHDOG tristate "WM831x watchdog" depends on MFD_WM831X diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index 468c320..de17014 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -178,3 +178,4 @@ obj-$(CONFIG_WM831X_WATCHDOG) += wm831x_wdt.o obj-$(CONFIG_WM8350_WATCHDOG) += wm8350_wdt.o obj-$(CONFIG_MAX63XX_WATCHDOG) += max63xx_wdt.o obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o +obj-$(CONFIG_MENF21BMC_WATCHDOG) += menf21bmc_wdt.o diff --git a/drivers/watchdog/menf21bmc_wdt.c b/drivers/watchdog/menf21bmc_wdt.c new file mode 100644 index 0000000..2042874 --- /dev/null +++ b/drivers/watchdog/menf21bmc_wdt.c @@ -0,0 +1,203 @@ +/* + * MEN 14F021P00 Board Management Controller (BMC) Watchdog Driver. + * + * Copyright (C) 2014 MEN Mikro Elektronik Nuernberg GmbH + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/module.h> +#include <linux/watchdog.h> +#include <linux/platform_device.h> +#include <linux/i2c.h> + +#define DEVNAME "menf21bmc_wdt" + +#define BMC_CMD_WD_ON 0x11 +#define BMC_CMD_WD_OFF 0x12 +#define BMC_CMD_WD_TRIG 0x13 +#define BMC_CMD_WD_TIME 0x14 +#define BMC_CMD_WD_STATE 0x17 +#define BMC_WD_OFF_VAL 0x69 +#define BMC_CMD_RST_RSN 0x92 + +#define BMC_WD_TIMEOUT_MIN 1 /* in sec */ +#define BMC_WD_TIMEOUT_MAX 6553 /* in sec */ + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +struct menf21bmc_wdt { + struct watchdog_device wdt; + struct i2c_client *i2c_client; +}; + +static int menf21bmc_wdt_set_bootstatus(struct menf21bmc_wdt *data) +{ + int rst_rsn; + + rst_rsn = i2c_smbus_read_byte_data(data->i2c_client, BMC_CMD_RST_RSN); + if (rst_rsn < 0) + return rst_rsn; + + if (rst_rsn == 0x02) + data->wdt.bootstatus |= WDIOF_CARDRESET; + else if (rst_rsn == 0x05) + data->wdt.bootstatus |= WDIOF_EXTERN1; + else if (rst_rsn == 0x06) + data->wdt.bootstatus |= WDIOF_EXTERN2; + else if (rst_rsn == 0x0A) + data->wdt.bootstatus |= WDIOF_POWERUNDER; + + return 0; +} + +static int menf21bmc_wdt_start(struct watchdog_device *wdt) +{ + struct menf21bmc_wdt *drv_data = watchdog_get_drvdata(wdt); + + return i2c_smbus_write_byte(drv_data->i2c_client, BMC_CMD_WD_ON); +} + +static int menf21bmc_wdt_stop(struct watchdog_device *wdt) +{ + struct menf21bmc_wdt *drv_data = watchdog_get_drvdata(wdt); + + return i2c_smbus_write_byte_data(drv_data->i2c_client, + BMC_CMD_WD_OFF, BMC_WD_OFF_VAL); +} + +static int +menf21bmc_wdt_settimeout(struct watchdog_device *wdt, unsigned int timeout) +{ + int ret; + struct menf21bmc_wdt *drv_data = watchdog_get_drvdata(wdt); + + /* + * BMC Watchdog does have a resolution of 100ms. + * Watchdog API defines the timeout in seconds, so we have to + * multiply the value. + */ + ret = i2c_smbus_write_word_data(drv_data->i2c_client, + BMC_CMD_WD_TIME, timeout * 10); + if (ret < 0) + return ret; + + wdt->timeout = timeout; + + return 0; +} + +static int menf21bmc_wdt_ping(struct watchdog_device *wdt) +{ + struct menf21bmc_wdt *drv_data = watchdog_get_drvdata(wdt); + + return i2c_smbus_write_byte(drv_data->i2c_client, BMC_CMD_WD_TRIG); +} + +static const struct watchdog_info menf21bmc_wdt_info = { + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, + .identity = DEVNAME, +}; + +static const struct watchdog_ops menf21bmc_wdt_ops = { + .owner = THIS_MODULE, + .start = menf21bmc_wdt_start, + .stop = menf21bmc_wdt_stop, + .ping = menf21bmc_wdt_ping, + .set_timeout = menf21bmc_wdt_settimeout, +}; + +static int menf21bmc_wdt_probe(struct platform_device *pdev) +{ + int ret, bmc_timeout; + struct menf21bmc_wdt *drv_data; + struct i2c_client *i2c_client = to_i2c_client(pdev->dev.parent); + + drv_data = devm_kzalloc(&pdev->dev, + sizeof(struct menf21bmc_wdt), GFP_KERNEL); + if (!drv_data) + return -ENOMEM; + + drv_data->wdt.ops = &menf21bmc_wdt_ops; + drv_data->wdt.info = &menf21bmc_wdt_info; + drv_data->wdt.min_timeout = BMC_WD_TIMEOUT_MIN; + drv_data->wdt.max_timeout = BMC_WD_TIMEOUT_MAX; + drv_data->i2c_client = i2c_client; + + /* + * Get the current wdt timeout value from the BMC because + * the BMC will save the value set before if the system restarts. + */ + bmc_timeout = i2c_smbus_read_word_data(drv_data->i2c_client, + BMC_CMD_WD_TIME); + if (bmc_timeout < 0) { + dev_err(&pdev->dev, "failed to get current WDT timeout\n"); + return bmc_timeout; + } + + watchdog_init_timeout(&drv_data->wdt, bmc_timeout / 10, &pdev->dev); + watchdog_set_nowayout(&drv_data->wdt, nowayout); + watchdog_set_drvdata(&drv_data->wdt, drv_data); + platform_set_drvdata(pdev, drv_data); + + ret = menf21bmc_wdt_set_bootstatus(drv_data); + if (ret < 0) { + dev_err(&pdev->dev, "failed to set Watchdog bootstatus\n"); + return ret; + } + + ret = watchdog_register_device(&drv_data->wdt); + if (ret) { + dev_err(&pdev->dev, "failed to register Watchdog device\n"); + return ret; + } + + dev_info(&pdev->dev, "MEN 14F021P00 BMC Watchdog device enabled\n"); + + return 0; +} + +static int menf21bmc_wdt_remove(struct platform_device *pdev) +{ + struct menf21bmc_wdt *drv_data = platform_get_drvdata(pdev); + + dev_warn(&pdev->dev, + "Unregister MEN 14F021P00 BMC Watchdog device, board may reset\n"); + + watchdog_unregister_device(&drv_data->wdt); + + return 0; +} + +static void menf21bmc_wdt_shutdown(struct platform_device *pdev) +{ + struct menf21bmc_wdt *drv_data = platform_get_drvdata(pdev); + + i2c_smbus_write_word_data(drv_data->i2c_client, + BMC_CMD_WD_OFF, BMC_WD_OFF_VAL); +} + +static struct platform_driver menf21bmc_wdt = { + .driver = { + .owner = THIS_MODULE, + .name = DEVNAME, + }, + .probe = menf21bmc_wdt_probe, + .remove = menf21bmc_wdt_remove, + .shutdown = menf21bmc_wdt_shutdown, +}; + +module_platform_driver(menf21bmc_wdt); + +MODULE_DESCRIPTION("MEN 14F021P00 BMC Watchdog driver"); +MODULE_AUTHOR("Andreas Werner <andreas.werner@men.de>"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:menf21bmc_wdt"); |
