diff options
| -rw-r--r-- | drivers/mfd/Kconfig | 23 | ||||
| -rw-r--r-- | drivers/mfd/Makefile | 1 | ||||
| -rw-r--r-- | drivers/mfd/stmpe.c | 915 | ||||
| -rw-r--r-- | drivers/mfd/stmpe.h | 176 | ||||
| -rw-r--r-- | include/linux/mfd/stmpe.h | 197 |
5 files changed, 1312 insertions, 0 deletions
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 29781ca..8f5145b 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -186,6 +186,29 @@ config TWL4030_CODEC select MFD_CORE default n +config MFD_STMPE + bool "Support STMicroelectronics STMPE" + depends on I2C=y && GENERIC_HARDIRQS + select MFD_CORE + help + Support for the STMPE family of I/O Expanders from + STMicroelectronics. + + Currently supported devices are: + + STMPE811: GPIO, Touchscreen + STMPE1601: GPIO, Keypad + STMPE2401: GPIO, Keypad + STMPE2403: GPIO, Keypad + + This driver provides common support for accessing the device, + additional drivers must be enabled in order to use the functionality + of the device. Currently available sub drivers are: + + GPIO: stmpe-gpio + Keypad: stmpe-keypad + Touchscreen: stmpe-ts + config MFD_TC35892 bool "Support Toshiba TC35892" depends on I2C=y && GENERIC_HARDIRQS diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index fb503e7..4410747 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_HTC_I2CPLD) += htc-i2cpld.o obj-$(CONFIG_MFD_DAVINCI_VOICECODEC) += davinci_voicecodec.o obj-$(CONFIG_MFD_DM355EVM_MSP) += dm355evm_msp.o +obj-$(CONFIG_MFD_STMPE) += stmpe.o obj-$(CONFIG_MFD_TC35892) += tc35892.o obj-$(CONFIG_MFD_T7L66XB) += t7l66xb.o tmio_core.o obj-$(CONFIG_MFD_TC6387XB) += tc6387xb.o tmio_core.o diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c new file mode 100644 index 0000000..a7f3099 --- /dev/null +++ b/drivers/mfd/stmpe.c @@ -0,0 +1,915 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License Terms: GNU General Public License, version 2 + * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/mfd/core.h> +#include <linux/mfd/stmpe.h> +#include "stmpe.h" + +static int __stmpe_enable(struct stmpe *stmpe, unsigned int blocks) +{ + return stmpe->variant->enable(stmpe, blocks, true); +} + +static int __stmpe_disable(struct stmpe *stmpe, unsigned int blocks) +{ + return stmpe->variant->enable(stmpe, blocks, false); +} + +static int __stmpe_reg_read(struct stmpe *stmpe, u8 reg) +{ + int ret; + + ret = i2c_smbus_read_byte_data(stmpe->i2c, reg); + if (ret < 0) + dev_err(stmpe->dev, "failed to read reg %#x: %d\n", + reg, ret); + + dev_vdbg(stmpe->dev, "rd: reg %#x => data %#x\n", reg, ret); + + return ret; +} + +static int __stmpe_reg_write(struct stmpe *stmpe, u8 reg, u8 val) +{ + int ret; + + dev_vdbg(stmpe->dev, "wr: reg %#x <= %#x\n", reg, val); + + ret = i2c_smbus_write_byte_data(stmpe->i2c, reg, val); + if (ret < 0) + dev_err(stmpe->dev, "failed to write reg %#x: %d\n", + reg, ret); + + return ret; +} + +static int __stmpe_set_bits(struct stmpe *stmpe, u8 reg, u8 mask, u8 val) +{ + int ret; + + ret = __stmpe_reg_read(stmpe, reg); + if (ret < 0) + return ret; + + ret &= ~mask; + ret |= val; + + return __stmpe_reg_write(stmpe, reg, ret); +} + +static int __stmpe_block_read(struct stmpe *stmpe, u8 reg, u8 length, + u8 *values) +{ + int ret; + + ret = i2c_smbus_read_i2c_block_data(stmpe->i2c, reg, length, values); + if (ret < 0) + dev_err(stmpe->dev, "failed to read regs %#x: %d\n", + reg, ret); + + dev_vdbg(stmpe->dev, "rd: reg %#x (%d) => ret %#x\n", reg, length, ret); + stmpe_dump_bytes("stmpe rd: ", values, length); + + return ret; +} + +static int __stmpe_block_write(struct stmpe *stmpe, u8 reg, u8 length, + const u8 *values) +{ + int ret; + + dev_vdbg(stmpe->dev, "wr: regs %#x (%d)\n", reg, length); + stmpe_dump_bytes("stmpe wr: ", values, length); + + ret = i2c_smbus_write_i2c_block_data(stmpe->i2c, reg, length, + values); + if (ret < 0) + dev_err(stmpe->dev, "failed to write regs %#x: %d\n", + reg, ret); + + return ret; +} + +/** + * stmpe_enable - enable blocks on an STMPE device + * @stmpe: Device to work on + * @blocks: Mask of blocks (enum stmpe_block values) to enable + */ +int stmpe_enable(struct stmpe *stmpe, unsigned int blocks) +{ + int ret; + + mutex_lock(&stmpe->lock); + ret = __stmpe_enable(stmpe, blocks); + mutex_unlock(&stmpe->lock); + + return ret; +} +EXPORT_SYMBOL_GPL(stmpe_enable); + +/** + * stmpe_disable - disable blocks on an STMPE device + * @stmpe: Device to work on + * @blocks: Mask of blocks (enum stmpe_block values) to enable + */ +int stmpe_disable(struct stmpe *stmpe, unsigned int blocks) +{ + int ret; + + mutex_lock(&stmpe->lock); + ret = __stmpe_disable(stmpe, blocks); + mutex_unlock(&stmpe->lock); + + return ret; +} +EXPORT_SYMBOL_GPL(stmpe_disable); + +/** + * stmpe_reg_read() - read a single STMPE register + * @stmpe: Device to read from + * @reg: Register to read + */ +int stmpe_reg_read(struct stmpe *stmpe, u8 reg) +{ + int ret; + + mutex_lock(&stmpe->lock); + ret = __stmpe_reg_read(stmpe, reg); + mutex_unlock(&stmpe->lock); + + return ret; +} +EXPORT_SYMBOL_GPL(stmpe_reg_read); + +/** + * stmpe_reg_write() - write a single STMPE register + * @stmpe: Device to write to + * @reg: Register to write + * @val: Value to write + */ +int stmpe_reg_write(struct stmpe *stmpe, u8 reg, u8 val) +{ + int ret; + + mutex_lock(&stmpe->lock); + ret = __stmpe_reg_write(stmpe, reg, val); + mutex_unlock(&stmpe->lock); + + return ret; +} +EXPORT_SYMBOL_GPL(stmpe_reg_write); + +/** + * stmpe_set_bits() - set the value of a bitfield in a STMPE register + * @stmpe: Device to write to + * @reg: Register to write + * @mask: Mask of bits to set + * @val: Value to set + */ +int stmpe_set_bits(struct stmpe *stmpe, u8 reg, u8 mask, u8 val) +{ + int ret; + + mutex_lock(&stmpe->lock); + ret = __stmpe_set_bits(stmpe, reg, mask, val); + mutex_unlock(&stmpe->lock); + + return ret; +} +EXPORT_SYMBOL_GPL(stmpe_set_bits); + +/** + * stmpe_block_read() - read multiple STMPE registers + * @stmpe: Device to read from + * @reg: First register + * @length: Number of registers + * @values: Buffer to write to + */ +int stmpe_block_read(struct stmpe *stmpe, u8 reg, u8 length, u8 *values) +{ + int ret; + + mutex_lock(&stmpe->lock); + ret = __stmpe_block_read(stmpe, reg, length, values); + mutex_unlock(&stmpe->lock); + + return ret; +} +EXPORT_SYMBOL_GPL(stmpe_block_read); + +/** + * stmpe_block_write() - write multiple STMPE registers + * @stmpe: Device to write to + * @reg: First register + * @length: Number of registers + * @values: Values to write + */ +int stmpe_block_write(struct stmpe *stmpe, u8 reg, u8 length, + const u8 *values) +{ + int ret; + + mutex_lock(&stmpe->lock); + ret = __stmpe_block_write(stmpe, reg, length, values); + mutex_unlock(&stmpe->lock); + + return ret; +} +EXPORT_SYMBOL_GPL(stmpe_block_write); + +/** + * stmpe_set_altfunc: set the alternate function for STMPE pins + * @stmpe: Device to configure + * @pins: Bitmask of pins to affect + * @block: block to enable alternate functions for + * + * @pins is assumed to have a bit set for each of the bits whose alternate + * function is to be changed, numbered according to the GPIOXY numbers. + * + * If the GPIO module is not enabled, this function automatically enables it in + * order to perform the change. + */ +int stmpe_set_altfunc(struct stmpe *stmpe, u32 pins, enum stmpe_block block) +{ + struct stmpe_variant_info *variant = stmpe->variant; + u8 regaddr = stmpe->regs[STMPE_IDX_GPAFR_U_MSB]; + int af_bits = variant->af_bits; + int numregs = DIV_ROUND_UP(stmpe->num_gpios * af_bits, 8); + int afperreg = 8 / af_bits; + int mask = (1 << af_bits) - 1; + u8 regs[numregs]; + int af; + int ret; + + mutex_lock(&stmpe->lock); + + ret = __stmpe_enable(stmpe, STMPE_BLOCK_GPIO); + if (ret < 0) + goto out; + + ret = __stmpe_block_read(stmpe, regaddr, numregs, regs); + if (ret < 0) + goto out; + + af = variant->get_altfunc(stmpe, block); + + while (pins) { + int pin = __ffs(pins); + int regoffset = numregs - (pin / afperreg) - 1; + int pos = (pin % afperreg) * (8 / afperreg); + + regs[regoffset] &= ~(mask << pos); + regs[regoffset] |= af << pos; + + pins &= ~(1 << pin); + } + + ret = __stmpe_block_write(stmpe, regaddr, numregs, regs); + +out: + mutex_unlock(&stmpe->lock); + return ret; +} +EXPORT_SYMBOL_GPL(stmpe_set_altfunc); + +/* + * GPIO (all variants) + */ + +static struct resource stmpe_gpio_resources[] = { + /* Start and end filled dynamically */ + { + .flags = IORESOURCE_IRQ, + }, +}; + +static struct mfd_cell stmpe_gpio_cell = { + .name = "stmpe-gpio", + .resources = stmpe_gpio_resources, + .num_resources = ARRAY_SIZE(stmpe_gpio_resources), +}; + +/* + * Keypad (1601, 2401, 2403) + */ + +static struct resource stmpe_keypad_resources[] = { + { + .name = "KEYPAD", + .start = 0, + .end = 0, + .flags = IORESOURCE_IRQ, + }, + { + .name = "KEYPAD_OVER", + .start = 1, + .end = 1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct mfd_cell stmpe_keypad_cell = { + .name = "stmpe-keypad", + .resources = stmpe_keypad_resources, + .num_resources = ARRAY_SIZE(stmpe_keypad_resources), +}; + +/* + * Touchscreen (STMPE811) + */ + +static struct resource stmpe_ts_resources[] = { + { + .name = "TOUCH_DET", + .start = 0, + .end = 0, + .flags = IORESOURCE_IRQ, + }, + { + .name = "FIFO_TH", + .start = 1, + .end = 1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct mfd_cell stmpe_ts_cell = { + .name = "stmpe-ts", + .resources = stmpe_ts_resources, + .num_resources = ARRAY_SIZE(stmpe_ts_resources), +}; + +/* + * STMPE811 + */ + +static const u8 stmpe811_regs[] = { + [STMPE_IDX_CHIP_ID] = STMPE811_REG_CHIP_ID, + [STMPE_IDX_ICR_LSB] = STMPE811_REG_INT_CTRL, + [STMPE_IDX_IER_LSB] = STMPE811_REG_INT_EN, + [STMPE_IDX_ISR_MSB] = STMPE811_REG_INT_STA, + [STMPE_IDX_GPMR_LSB] = STMPE811_REG_GPIO_MP_STA, + [STMPE_IDX_GPSR_LSB] = STMPE811_REG_GPIO_SET_PIN, + [STMPE_IDX_GPCR_LSB] = STMPE811_REG_GPIO_CLR_PIN, + [STMPE_IDX_GPDR_LSB] = STMPE811_REG_GPIO_DIR, + [STMPE_IDX_GPRER_LSB] = STMPE811_REG_GPIO_RE, + [STMPE_IDX_GPFER_LSB] = STMPE811_REG_GPIO_FE, + [STMPE_IDX_GPAFR_U_MSB] = STMPE811_REG_GPIO_AF, + [STMPE_IDX_IEGPIOR_LSB] = STMPE811_REG_GPIO_INT_EN, + [STMPE_IDX_ISGPIOR_MSB] = STMPE811_REG_GPIO_INT_STA, + [STMPE_IDX_GPEDR_MSB] = STMPE811_REG_GPIO_ED, +}; + +static struct stmpe_variant_block stmpe811_blocks[] = { + { + .cell = &stmpe_gpio_cell, + .irq = STMPE811_IRQ_GPIOC, + .block = STMPE_BLOCK_GPIO, + }, + { + .cell = &stmpe_ts_cell, + .irq = STMPE811_IRQ_TOUCH_DET, + .block = STMPE_BLOCK_TOUCHSCREEN, + }, +}; + +static int stmpe811_enable(struct stmpe *stmpe, unsigned int blocks, + bool enable) +{ + unsigned int mask = 0; + + if (blocks & STMPE_BLOCK_GPIO) + mask |= STMPE811_SYS_CTRL2_GPIO_OFF; + + if (blocks & STMPE_BLOCK_ADC) + mask |= STMPE811_SYS_CTRL2_ADC_OFF; + + if (blocks & STMPE_BLOCK_TOUCHSCREEN) + mask |= STMPE811_SYS_CTRL2_TSC_OFF; + + return __stmpe_set_bits(stmpe, STMPE811_REG_SYS_CTRL2, mask, + enable ? 0 : mask); +} + +static int stmpe811_get_altfunc(struct stmpe *stmpe, enum stmpe_block block) +{ + /* 0 for touchscreen, 1 for GPIO */ + return block != STMPE_BLOCK_TOUCHSCREEN; +} + +static struct stmpe_variant_info stmpe811 = { + .name = "stmpe811", + .id_val = 0x0811, + .id_mask = 0xffff, + .num_gpios = 8, + .af_bits = 1, + .regs = stmpe811_regs, + .blocks = stmpe811_blocks, + .num_blocks = ARRAY_SIZE(stmpe811_blocks), + .num_irqs = STMPE811_NR_INTERNAL_IRQS, + .enable = stmpe811_enable, + .get_altfunc = stmpe811_get_altfunc, +}; + +/* + * STMPE1601 + */ + +static const u8 stmpe1601_regs[] = { + [STMPE_IDX_CHIP_ID] = STMPE1601_REG_CHIP_ID, + [STMPE_IDX_ICR_LSB] = STMPE1601_REG_ICR_LSB, + [STMPE_IDX_IER_LSB] = STMPE1601_REG_IER_LSB, + [STMPE_IDX_ISR_MSB] = STMPE1601_REG_ISR_MSB, + [STMPE_IDX_GPMR_LSB] = STMPE1601_REG_GPIO_MP_LSB, + [STMPE_IDX_GPSR_LSB] = STMPE1601_REG_GPIO_SET_LSB, + [STMPE_IDX_GPCR_LSB] = STMPE1601_REG_GPIO_CLR_LSB, + [STMPE_IDX_GPDR_LSB] = STMPE1601_REG_GPIO_SET_DIR_LSB, + [STMPE_IDX_GPRER_LSB] = STMPE1601_REG_GPIO_RE_LSB, + [STMPE_IDX_GPFER_LSB] = STMPE1601_REG_GPIO_FE_LSB, + [STMPE_IDX_GPAFR_U_MSB] = STMPE1601_REG_GPIO_AF_U_MSB, + [STMPE_IDX_IEGPIOR_LSB] = STMPE1601_REG_INT_EN_GPIO_MASK_LSB, + [STMPE_IDX_ISGPIOR_MSB] = STMPE1601_REG_INT_STA_GPIO_MSB, + [STMPE_IDX_GPEDR_MSB] = STMPE1601_REG_GPIO_ED_MSB, +}; + +static struct stmpe_variant_block stmpe1601_blocks[] = { + { + .cell = &stmpe_gpio_cell, + .irq = STMPE24XX_IRQ_GPIOC, + .block = STMPE_BLOCK_GPIO, + }, + { + .cell = &stmpe_keypad_cell, + .irq = STMPE24XX_IRQ_KEYPAD, + .block = STMPE_BLOCK_KEYPAD, + }, +}; + +static int stmpe1601_enable(struct stmpe *stmpe, unsigned int blocks, + bool enable) +{ + unsigned int mask = 0; + + if (blocks & STMPE_BLOCK_GPIO) + mask |= STMPE1601_SYS_CTRL_ENABLE_GPIO; + + if (blocks & STMPE_BLOCK_KEYPAD) + mask |= STMPE1601_SYS_CTRL_ENABLE_KPC; + + return __stmpe_set_bits(stmpe, STMPE1601_REG_SYS_CTRL, mask, + enable ? mask : 0); +} + +static int stmpe1601_get_altfunc(struct stmpe *stmpe, enum stmpe_block block) +{ + switch (block) { + case STMPE_BLOCK_PWM: + return 2; + + case STMPE_BLOCK_KEYPAD: + return 1; + + case STMPE_BLOCK_GPIO: + default: + return 0; + } +} + +static struct stmpe_variant_info stmpe1601 = { + .name = "stmpe1601", + .id_val = 0x0210, + .id_mask = 0xfff0, /* at least 0x0210 and 0x0212 */ + .num_gpios = 16, + .af_bits = 2, + .regs = stmpe1601_regs, + .blocks = stmpe1601_blocks, + .num_blocks = ARRAY_SIZE(stmpe1601_blocks), + .num_irqs = STMPE1601_NR_INTERNAL_IRQS, + .enable = stmpe1601_enable, + .get_altfunc = stmpe1601_get_altfunc, +}; + +/* + * STMPE24XX + */ + +static const u8 stmpe24xx_regs[] = { + [STMPE_IDX_CHIP_ID] = STMPE24XX_REG_CHIP_ID, + [STMPE_IDX_ICR_LSB] = STMPE24XX_REG_ICR_LSB, + [STMPE_IDX_IER_LSB] = STMPE24XX_REG_IER_LSB, + [STMPE_IDX_ISR_MSB] = STMPE24XX_REG_ISR_MSB, + [STMPE_IDX_GPMR_LSB] = STMPE24XX_REG_GPMR_LSB, + [STMPE_IDX_GPSR_LSB] = STMPE24XX_REG_GPSR_LSB, + [STMPE_IDX_GPCR_LSB] = STMPE24XX_REG_GPCR_LSB, + [STMPE_IDX_GPDR_LSB] = STMPE24XX_REG_GPDR_LSB, + [STMPE_IDX_GPRER_LSB] = STMPE24XX_REG_GPRER_LSB, + [STMPE_IDX_GPFER_LSB] = STMPE24XX_REG_GPFER_LSB, + [STMPE_IDX_GPAFR_U_MSB] = STMPE24XX_REG_GPAFR_U_MSB, + [STMPE_IDX_IEGPIOR_LSB] = STMPE24XX_REG_IEGPIOR_LSB, + [STMPE_IDX_ISGPIOR_MSB] = STMPE24XX_REG_ISGPIOR_MSB, + [STMPE_IDX_GPEDR_MSB] = STMPE24XX_REG_GPEDR_MSB, +}; + +static struct stmpe_variant_block stmpe24xx_blocks[] = { + { + .cell = &stmpe_gpio_cell, + .irq = STMPE24XX_IRQ_GPIOC, + .block = STMPE_BLOCK_GPIO, + }, + { + .cell = &stmpe_keypad_cell, + .irq = STMPE24XX_IRQ_KEYPAD, + .block = STMPE_BLOCK_KEYPAD, + }, +}; + +static int stmpe24xx_enable(struct stmpe *stmpe, unsigned int blocks, + bool enable) +{ + unsigned int mask = 0; + + if (blocks & STMPE_BLOCK_GPIO) + mask |= STMPE24XX_SYS_CTRL_ENABLE_GPIO; + + if (blocks & STMPE_BLOCK_KEYPAD) + mask |= STMPE24XX_SYS_CTRL_ENABLE_KPC; + + return __stmpe_set_bits(stmpe, STMPE24XX_REG_SYS_CTRL, mask, + enable ? mask : 0); +} + +static int stmpe24xx_get_altfunc(struct stmpe *stmpe, enum stmpe_block block) +{ + switch (block) { + case STMPE_BLOCK_ROTATOR: + return 2; + + case STMPE_BLOCK_KEYPAD: + return 1; + + case STMPE_BLOCK_GPIO: + default: + return 0; + } +} + +static struct stmpe_variant_info stmpe2401 = { + .name = "stmpe2401", + .id_val = 0x0101, + .id_mask = 0xffff, + .num_gpios = 24, + .af_bits = 2, + .regs = stmpe24xx_regs, + .blocks = stmpe24xx_blocks, + .num_blocks = ARRAY_SIZE(stmpe24xx_blocks), + .num_irqs = STMPE24XX_NR_INTERNAL_IRQS, + .enable = stmpe24xx_enable, + .get_altfunc = stmpe24xx_get_altfunc, +}; + +static struct stmpe_variant_info stmpe2403 = { + .name = "stmpe2403", + .id_val = 0x0120, + .id_mask = 0xffff, + .num_gpios = 24, + .af_bits = 2, + .regs = stmpe24xx_regs, + .blocks = stmpe24xx_blocks, + .num_blocks = ARRAY_SIZE(stmpe24xx_blocks), + .num_irqs = STMPE24XX_NR_INTERNAL_IRQS, + .enable = stmpe24xx_enable, + .get_altfunc = stmpe24xx_get_altfunc, +}; + +static struct stmpe_variant_info *stmpe_variant_info[] = { + [STMPE811] = &stmpe811, + [STMPE1601] = &stmpe1601, + [STMPE2401] = &stmpe2401, + [STMPE2403] = &stmpe2403, +}; + +static irqreturn_t stmpe_irq(int irq, void *data) +{ + struct stmpe *stmpe = data; + struct stmpe_variant_info *variant = stmpe->variant; + int num = DIV_ROUND_UP(variant->num_irqs, 8); + u8 israddr = stmpe->regs[STMPE_IDX_ISR_MSB]; + u8 isr[num]; + int ret; + int i; + + ret = stmpe_block_read(stmpe, israddr, num, isr); + if (ret < 0) + return IRQ_NONE; + + for (i = 0; i < num; i++) { + int bank = num - i - 1; + u8 status = isr[i]; + u8 clear; + + status &= stmpe->ier[bank]; + if (!status) + continue; + + clear = status; + while (status) { + int bit = __ffs(status); + int line = bank * 8 + bit; + + handle_nested_irq(stmpe->irq_base + line); + status &= ~(1 << bit); + } + + stmpe_reg_write(stmpe, israddr + i, clear); + } + + return IRQ_HANDLED; +} + +static void stmpe_irq_lock(unsigned int irq) +{ + struct stmpe *stmpe = get_irq_chip_data(irq); + + mutex_lock(&stmpe->irq_lock); +} + +static void stmpe_irq_sync_unlock(unsigned int irq) +{ + struct stmpe *stmpe = get_irq_chip_data(irq); + struct stmpe_variant_info *variant = stmpe->variant; + int num = DIV_ROUND_UP(variant->num_irqs, 8); + int i; + + for (i = 0; i < num; i++) { + u8 new = stmpe->ier[i]; + u8 old = stmpe->oldier[i]; + + if (new == old) + continue; + + stmpe->oldier[i] = new; + stmpe_reg_write(stmpe, stmpe->regs[STMPE_IDX_IER_LSB] - i, new); + } + + mutex_unlock(&stmpe->irq_lock); +} + +static void stmpe_irq_mask(unsigned int irq) +{ + struct stmpe *stmpe = get_irq_chip_data(irq); + int offset = irq - stmpe->irq_base; + int regoffset = offset / 8; + int mask = 1 << (offset % 8); + + stmpe->ier[regoffset] &= ~mask; +} + +static void stmpe_irq_unmask(unsigned int irq) +{ + struct stmpe *stmpe = get_irq_chip_data(irq); + int offset = irq - stmpe->irq_base; + int regoffset = offset / 8; + int mask = 1 << (offset % 8); + + stmpe->ier[regoffset] |= mask; +} + +static struct irq_chip stmpe_irq_chip = { + .name = "stmpe", + .bus_lock = stmpe_irq_lock, + .bus_sync_unlock = stmpe_irq_sync_unlock, + .mask = stmpe_irq_mask, + .unmask = stmpe_irq_unmask, +}; + +static int __devinit stmpe_irq_init(struct stmpe *stmpe) +{ + int num_irqs = stmpe->variant->num_irqs; + int base = stmpe->irq_base; + int irq; + + for (irq = base; irq < base + num_irqs; irq++) { + set_irq_chip_data(irq, stmpe); + set_irq_chip_and_handler(irq, &stmpe_irq_chip, + handle_edge_irq); + set_irq_nested_thread(irq, 1); +#ifdef CONFIG_ARM + set_irq_flags(irq, IRQF_VALID); +#else + set_irq_noprobe(irq); +#endif + } + + return 0; +} + +static void stmpe_irq_remove(struct stmpe *stmpe) +{ + int num_irqs = stmpe->variant->num_irqs; + int base = stmpe->irq_base; + int irq; + + for (irq = base; irq < base + num_irqs; irq++) { +#ifdef CONFIG_ARM + set_irq_flags(irq, 0); +#endif + set_irq_chip_and_handler(irq, NULL, NULL); + set_irq_chip_data(irq, NULL); + } +} + +static int __devinit stmpe_chip_init(struct stmpe *stmpe) +{ + unsigned int irq_trigger = stmpe->pdata->irq_trigger; + struct stmpe_variant_info *variant = stmpe->variant; + u8 icr = STMPE_ICR_LSB_GIM; + unsigned int id; + u8 data[2]; + int ret; + + ret = stmpe_block_read(stmpe, stmpe->regs[STMPE_IDX_CHIP_ID], + ARRAY_SIZE(data), data); + if (ret < 0) + return ret; + + id = (data[0] << 8) | data[1]; + if ((id & variant->id_mask) != variant->id_val) { + dev_err(stmpe->dev, "unknown chip id: %#x\n", id); + return -EINVAL; + } + + dev_info(stmpe->dev, "%s detected, chip id: %#x\n", variant->name, id); + + /* Disable all modules -- subdrivers should enable what they need. */ + ret = stmpe_disable(stmpe, ~0); + if (ret) + return ret; + + if (irq_trigger == IRQF_TRIGGER_FALLING || + irq_trigger == IRQF_TRIGGER_RISING) + icr |= STMPE_ICR_LSB_EDGE; + + if (irq_trigger == IRQF_TRIGGER_RISING || + irq_trigger == IRQF_TRIGGER_HIGH) + icr |= STMPE_ICR_LSB_HIGH; + + if (stmpe->pdata->irq_invert_polarity) + icr ^= STMPE_ICR_LSB_HIGH; + + return stmpe_reg_write(stmpe, stmpe->regs[STMPE_IDX_ICR_LSB], icr); +} + +static int __devinit stmpe_add_device(struct stmpe *stmpe, + struct mfd_cell *cell, int irq) +{ + return mfd_add_devices(stmpe->dev, stmpe->pdata->id, cell, 1, + NULL, stmpe->irq_base + irq); +} + +static int __devinit stmpe_devices_init(struct stmpe *stmpe) +{ + struct stmpe_variant_info *variant = stmpe->variant; + unsigned int platform_blocks = stmpe->pdata->blocks; + int ret = -EINVAL; + int i; + + for (i = 0; i < variant->num_blocks; i++) { + struct stmpe_variant_block *block = &variant->blocks[i]; + + if (!(platform_blocks & block->block)) + continue; + + platform_blocks &= ~block->block; + ret = stmpe_add_device(stmpe, block->cell, block->irq); + if (ret) + return ret; + } + + if (platform_blocks) + dev_warn(stmpe->dev, + "platform wants blocks (%#x) not present on variant", + platform_blocks); + + return ret; +} + +static int __devinit stmpe_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct stmpe_platform_data *pdata = i2c->dev.platform_data; + struct stmpe *stmpe; + int ret; + + if (!pdata) + return -EINVAL; + + stmpe = kzalloc(sizeof(struct stmpe), GFP_KERNEL); + if (!stmpe) + return -ENOMEM; + + mutex_init(&stmpe->irq_lock); + mutex_init(&stmpe->lock); + + stmpe->dev = &i2c->dev; + stmpe->i2c = i2c; + + stmpe->pdata = pdata; + stmpe->irq_base = pdata->irq_base; + + stmpe->partnum = id->driver_data; + stmpe->variant = stmpe_variant_info[stmpe->partnum]; + stmpe->regs = stmpe->variant->regs; + stmpe->num_gpios = stmpe->variant->num_gpios; + + i2c_set_clientdata(i2c, stmpe); + + ret = stmpe_chip_init(stmpe); + if (ret) + goto out_free; + + ret = stmpe_irq_init(stmpe); + if (ret) + goto out_free; + + ret = request_threaded_irq(stmpe->i2c->irq, NULL, stmpe_irq, + pdata->irq_trigger | IRQF_ONESHOT, + "stmpe", stmpe); + if (ret) { + dev_err(stmpe->dev, "failed to request IRQ: %d\n", ret); + goto out_removeirq; + } + + ret = stmpe_devices_init(stmpe); + if (ret) { + dev_err(stmpe->dev, "failed to add children\n"); + goto out_removedevs; + } + + return 0; + +out_removedevs: + mfd_remove_devices(stmpe->dev); + free_irq(stmpe->i2c->irq, stmpe); +out_removeirq: + stmpe_irq_remove(stmpe); +out_free: + kfree(stmpe); + return ret; +} + +static int __devexit stmpe_remove(struct i2c_client *client) +{ + struct stmpe *stmpe = i2c_get_clientdata(client); + + mfd_remove_devices(stmpe->dev); + + free_irq(stmpe->i2c->irq, stmpe); + stmpe_irq_remove(stmpe); + + kfree(stmpe); + + return 0; +} + +static const struct i2c_device_id stmpe_id[] = { + { "stmpe811", STMPE811 }, + { "stmpe1601", STMPE1601 }, + { "stmpe2401", STMPE2401 }, + { "stmpe2403", STMPE2403 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, stmpe_id); + +static struct i2c_driver stmpe_driver = { + .driver.name = "stmpe", + .driver.owner = THIS_MODULE, + .probe = stmpe_probe, + .remove = __devexit_p(stmpe_remove), + .id_table = stmpe_id, +}; + +static int __init stmpe_init(void) +{ + return i2c_add_driver(&stmpe_driver); +} +subsys_initcall(stmpe_init); + +static void __exit stmpe_exit(void) +{ + i2c_del_driver(&stmpe_driver); +} +module_exit(stmpe_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("STMPE MFD core driver"); +MODULE_AUTHOR("Rabin Vincent <rabin.vincent@stericsson.com>"); diff --git a/drivers/mfd/stmpe.h b/drivers/mfd/stmpe.h new file mode 100644 index 0000000..991f0ec --- /dev/null +++ b/drivers/mfd/stmpe.h @@ -0,0 +1,176 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License Terms: GNU General Public License, version 2 + * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson + */ + +#ifndef __STMPE_H +#define __STMPE_H + +#ifdef STMPE_DUMP_BYTES +static inline void stmpe_dump_bytes(const char *str, const void *buf, + size_t len) +{ + print_hex_dump_bytes(str, DUMP_PREFIX_OFFSET, buf, len); +} +#else +static inline void stmpe_dump_bytes(const char *str, const void *buf, + size_t len) +{ +} +#endif + +/** + * struct stmpe_variant_block - information about block + * @cell: base mfd cell + * @irq: interrupt number to be added to each IORESOURCE_IRQ + * in the cell + * @block: block id; used for identification with platform data and for + * enable and altfunc callbacks + */ +struct stmpe_variant_block { + struct mfd_cell *cell; + int irq; + enum stmpe_block block; +}; + +/** + * struct stmpe_variant_info - variant-specific information + * @name: part name + * @id_val: content of CHIPID register + * @id_mask: bits valid in CHIPID register for comparison with id_val + * @num_gpios: number of GPIOS + * @af_bits: number of bits used to specify the alternate function + * @blocks: list of blocks present on this device + * @num_blocks: number of blocks present on this device + * @num_irqs: number of internal IRQs available on this device + * @enable: callback to enable the specified blocks. + * Called with the I/O lock held. + * @get_altfunc: callback to get the alternate function number for the + * specific block + */ +struct stmpe_variant_info { + const char *name; + u16 id_val; + u16 id_mask; + int num_gpios; + int af_bits; + const u8 *regs; + struct stmpe_variant_block *blocks; + int num_blocks; + int num_irqs; + int (*enable)(struct stmpe *stmpe, unsigned int blocks, bool enable); + int (*get_altfunc)(struct stmpe *stmpe, enum stmpe_block block); +}; + +#define STMPE_ICR_LSB_HIGH (1 << 2) +#define STMPE_ICR_LSB_EDGE (1 << 1) +#define STMPE_ICR_LSB_GIM (1 << 0) + +/* + * STMPE811 + */ + +#define STMPE811_IRQ_TOUCH_DET 0 +#define STMPE811_IRQ_FIFO_TH 1 +#define STMPE811_IRQ_FIFO_OFLOW 2 +#define STMPE811_IRQ_FIFO_FULL 3 +#define STMPE811_IRQ_FIFO_EMPTY 4 +#define STMPE811_IRQ_TEMP_SENS 5 +#define STMPE811_IRQ_ADC 6 +#define STMPE811_IRQ_GPIOC 7 +#define STMPE811_NR_INTERNAL_IRQS 8 + +#define STMPE811_REG_CHIP_ID 0x00 +#define STMPE811_REG_SYS_CTRL2 0x04 +#define STMPE811_REG_INT_CTRL 0x09 +#define STMPE811_REG_INT_EN 0x0A +#define STMPE811_REG_INT_STA 0x0B +#define STMPE811_REG_GPIO_INT_EN 0x0C +#define STMPE811_REG_GPIO_INT_STA 0x0D +#define STMPE811_REG_GPIO_SET_PIN 0x10 +#define STMPE811_REG_GPIO_CLR_PIN 0x11 +#define STMPE811_REG_GPIO_MP_STA 0x12 +#define STMPE811_REG_GPIO_DIR 0x13 +#define STMPE811_REG_GPIO_ED 0x14 +#define STMPE811_REG_GPIO_RE 0x15 +#define STMPE811_REG_GPIO_FE 0x16 +#define STMPE811_REG_GPIO_AF 0x17 + +#define STMPE811_SYS_CTRL2_ADC_OFF (1 << 0) +#define STMPE811_SYS_CTRL2_TSC_OFF (1 << 1) +#define STMPE811_SYS_CTRL2_GPIO_OFF (1 << 2) +#define STMPE811_SYS_CTRL2_TS_OFF (1 << 3) + +/* + * STMPE1601 + */ + +#define STMPE1601_IRQ_GPIOC 8 +#define STMPE1601_IRQ_PWM3 7 +#define STMPE1601_IRQ_PWM2 6 +#define STMPE1601_IRQ_PWM1 5 +#define STMPE1601_IRQ_PWM0 4 +#define STMPE1601_IRQ_KEYPAD_OVER 2 +#define STMPE1601_IRQ_KEYPAD 1 +#define STMPE1601_IRQ_WAKEUP 0 +#define STMPE1601_NR_INTERNAL_IRQS 9 + +#define STMPE1601_REG_SYS_CTRL 0x02 +#define STMPE1601_REG_ICR_LSB 0x11 +#define STMPE1601_REG_IER_LSB 0x13 +#define STMPE1601_REG_ISR_MSB 0x14 +#define STMPE1601_REG_CHIP_ID 0x80 +#define STMPE1601_REG_INT_EN_GPIO_MASK_LSB 0x17 +#define STMPE1601_REG_INT_STA_GPIO_MSB 0x18 +#define STMPE1601_REG_GPIO_MP_LSB 0x87 +#define STMPE1601_REG_GPIO_SET_LSB 0x83 +#define STMPE1601_REG_GPIO_CLR_LSB 0x85 +#define STMPE1601_REG_GPIO_SET_DIR_LSB 0x89 +#define STMPE1601_REG_GPIO_ED_MSB 0x8A +#define STMPE1601_REG_GPIO_RE_LSB 0x8D +#define STMPE1601_REG_GPIO_FE_LSB 0x8F +#define STMPE1601_REG_GPIO_AF_U_MSB 0x92 + +#define STMPE1601_SYS_CTRL_ENABLE_GPIO (1 << 3) +#define STMPE1601_SYS_CTRL_ENABLE_KPC (1 << 1) +#define STMPE1601_SYSCON_ENABLE_SPWM (1 << 0) + +/* + * STMPE24xx + */ + +#define STMPE24XX_IRQ_GPIOC 8 +#define STMPE24XX_IRQ_PWM2 7 +#define STMPE24XX_IRQ_PWM1 6 +#define STMPE24XX_IRQ_PWM0 5 +#define STMPE24XX_IRQ_ROT_OVER 4 +#define STMPE24XX_IRQ_ROT 3 +#define STMPE24XX_IRQ_KEYPAD_OVER 2 +#define STMPE24XX_IRQ_KEYPAD 1 +#define STMPE24XX_IRQ_WAKEUP 0 +#define STMPE24XX_NR_INTERNAL_IRQS 9 + +#define STMPE24XX_REG_SYS_CTRL 0x02 +#define STMPE24XX_REG_ICR_LSB 0x11 +#define STMPE24XX_REG_IER_LSB 0x13 +#define STMPE24XX_REG_ISR_MSB 0x14 +#define STMPE24XX_REG_CHIP_ID 0x80 +#define STMPE24XX_REG_IEGPIOR_LSB 0x18 +#define STMPE24XX_REG_ISGPIOR_MSB 0x19 +#define STMPE24XX_REG_GPMR_LSB 0xA5 +#define STMPE24XX_REG_GPSR_LSB 0x85 +#define STMPE24XX_REG_GPCR_LSB 0x88 +#define STMPE24XX_REG_GPDR_LSB 0x8B +#define STMPE24XX_REG_GPEDR_MSB 0x8C +#define STMPE24XX_REG_GPRER_LSB 0x91 +#define STMPE24XX_REG_GPFER_LSB 0x94 +#define STMPE24XX_REG_GPAFR_U_MSB 0x9B + +#define STMPE24XX_SYS_CTRL_ENABLE_GPIO (1 << 3) +#define STMPE24XX_SYSCON_ENABLE_PWM (1 << 2) +#define STMPE24XX_SYS_CTRL_ENABLE_KPC (1 << 1) +#define STMPE24XX_SYSCON_ENABLE_ROT (1 << 0) + +#endif diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h new file mode 100644 index 0000000..90faa98 --- /dev/null +++ b/include/linux/mfd/stmpe.h @@ -0,0 +1,197 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License Terms: GNU General Public License, version 2 + * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson + */ + +#ifndef __LINUX_MFD_STMPE_H +#define __LINUX_MFD_STMPE_H + +#include <linux/device.h> + +enum stmpe_block { + STMPE_BLOCK_GPIO = 1 << 0, + STMPE_BLOCK_KEYPAD = 1 << 1, + STMPE_BLOCK_TOUCHSCREEN = 1 << 2, + STMPE_BLOCK_ADC = 1 << 3, + STMPE_BLOCK_PWM = 1 << 4, + STMPE_BLOCK_ROTATOR = 1 << 5, +}; + +enum stmpe_partnum { + STMPE811, + STMPE1601, + STMPE2401, + STMPE2403, +}; + +/* + * For registers whose locations differ on variants, the correct address is + * obtained by indexing stmpe->regs with one of the following. + */ +enum { + STMPE_IDX_CHIP_ID, + STMPE_IDX_ICR_LSB, + STMPE_IDX_IER_LSB, + STMPE_IDX_ISR_MSB, + STMPE_IDX_GPMR_LSB, + STMPE_IDX_GPSR_LSB, + STMPE_IDX_GPCR_LSB, + STMPE_IDX_GPDR_LSB, + STMPE_IDX_GPEDR_MSB, + STMPE_IDX_GPRER_LSB, + STMPE_IDX_GPFER_LSB, + STMPE_IDX_GPAFR_U_MSB, + STMPE_IDX_IEGPIOR_LSB, + STMPE_IDX_ISGPIOR_MSB, + STMPE_IDX_MAX, +}; + + +struct stmpe_variant_info; + +/** + * struct stmpe - STMPE MFD structure + * @lock: lock protecting I/O operations + * @irq_lock: IRQ bus lock + * @dev: device, mostly for dev_dbg() + * @i2c: i2c client + * @variant: the detected STMPE model number + * @regs: list of addresses of registers which are at different addresses on + * different variants. Indexed by one of STMPE_IDX_*. + * @irq_base: starting IRQ number for internal IRQs + * @num_gpios: number of gpios, differs for variants + * @ier: cache of IER registers for bus_lock + * @oldier: cache of IER registers for bus_lock + * @pdata: platform data + */ +struct stmpe { + struct mutex lock; + struct mutex irq_lock; + struct device *dev; + struct i2c_client *i2c; + enum stmpe_partnum partnum; + struct stmpe_variant_info *variant; + const u8 *regs; + + int irq_base; + int num_gpios; + u8 ier[2]; + u8 oldier[2]; + struct stmpe_platform_data *pdata; +}; + +extern int stmpe_reg_write(struct stmpe *stmpe, u8 reg, u8 data); +extern int stmpe_reg_read(struct stmpe *stmpe, u8 reg); +extern int stmpe_block_read(struct stmpe *stmpe, u8 reg, u8 length, + u8 *values); +extern int stmpe_block_write(struct stmpe *stmpe, u8 reg, u8 length, + const u8 *values); +extern int stmpe_set_bits(struct stmpe *stmpe, u8 reg, u8 mask, u8 val); +extern int stmpe_set_altfunc(struct stmpe *stmpe, u32 pins, + enum stmpe_block block); +extern int stmpe_enable(struct stmpe *stmpe, unsigned int blocks); +extern int stmpe_disable(struct stmpe *stmpe, unsigned int blocks); + +struct matrix_keymap_data; + +/** + * struct stmpe_keypad_platform_data - STMPE keypad platform data + * @keymap_data: key map table and size + * @debounce_ms: debounce interval, in ms. Maximum is + * %STMPE_KEYPAD_MAX_DEBOUNCE. + * @scan_count: number of key scanning cycles to confirm key data. + * Maximum is %STMPE_KEYPAD_MAX_SCAN_COUNT. + * @no_autorepeat: disable key autorepeat + */ +struct stmpe_keypad_platform_data { + struct matrix_keymap_data *keymap_data; + unsigned int debounce_ms; + unsigned int scan_count; + bool no_autorepeat; +}; + +/** + * struct stmpe_gpio_platform_data - STMPE GPIO platform data + * @gpio_base: first gpio number assigned. A maximum of + * %STMPE_NR_GPIOS GPIOs will be allocated. + */ +struct stmpe_gpio_platform_data { + int gpio_base; + void (*setup)(struct stmpe *stmpe, unsigned gpio_base); + void (*remove)(struct stmpe *stmpe, unsigned gpio_base); +}; + +/** + * struct stmpe_ts_platform_data - stmpe811 touch screen controller platform + * data + * @sample_time: ADC converstion time in number of clock. + * (0 -> 36 clocks, 1 -> 44 clocks, 2 -> 56 clocks, 3 -> 64 clocks, + * 4 -> 80 clocks, 5 -> 96 clocks, 6 -> 144 clocks), + * recommended is 4. + * @mod_12b: ADC Bit mode (0 -> 10bit ADC, 1 -> 12bit ADC) + * @ref_sel: ADC reference source + * (0 -> internal reference, 1 -> external reference) + * @adc_freq: ADC Clock speed + * (0 -> 1.625 MHz, 1 -> 3.25 MHz, 2 || 3 -> 6.5 MHz) + * @ave_ctrl: Sample average control + * (0 -> 1 sample, 1 -> 2 samples, 2 -> 4 samples, 3 -> 8 samples) + * @touch_det_delay: Touch detect interrupt delay + * (0 -> 10 us, 1 -> 50 us, 2 -> 100 us, 3 -> 500 us, + * 4-> 1 ms, 5 -> 5 ms, 6 -> 10 ms, 7 -> 50 ms) + * recommended is 3 + * @settling: Panel driver settling time + * (0 -> 10 us, 1 -> 100 us, 2 -> 500 us, 3 -> 1 ms, + * 4 -> 5 ms, 5 -> 10 ms, 6 for 50 ms, 7 -> 100 ms) + * recommended is 2 + * @fraction_z: Length of the fractional part in z + * (fraction_z ([0..7]) = Count of the fractional part) + * recommended is 7 + * @i_drive: current limit value of the touchscreen drivers + * (0 -> 20 mA typical 35 mA max, 1 -> 50 mA typical 80 mA max) + * + * */ +struct stmpe_ts_platform_data { + u8 sample_time; + u8 mod_12b; + u8 ref_sel; + u8 adc_freq; + u8 ave_ctrl; + u8 touch_det_delay; + u8 settling; + u8 fraction_z; + u8 i_drive; +}; + +/** + * struct stmpe_platform_data - STMPE platform data + * @id: device id to distinguish between multiple STMPEs on the same board + * @blocks: bitmask of blocks to enable (use STMPE_BLOCK_*) + * @irq_trigger: IRQ trigger to use for the interrupt to the host + * @irq_invert_polarity: IRQ line is connected with reversed polarity + * @irq_base: base IRQ number. %STMPE_NR_IRQS irqs will be used, or + * %STMPE_NR_INTERNAL_IRQS if the GPIO driver is not used. + * @gpio: GPIO-specific platform data + * @keypad: keypad-specific platform data + * @ts: touchscreen-specific platform data + */ +struct stmpe_platform_data { + int id; + unsigned int blocks; + int irq_base; + unsigned int irq_trigger; + bool irq_invert_polarity; + + struct stmpe_gpio_platform_data *gpio; + struct stmpe_keypad_platform_data *keypad; + struct stmpe_ts_platform_data *ts; +}; + +#define STMPE_NR_INTERNAL_IRQS 9 +#define STMPE_INT_GPIO(x) (STMPE_NR_INTERNAL_IRQS + (x)) + +#define STMPE_NR_GPIOS 24 +#define STMPE_NR_IRQS STMPE_INT_GPIO(STMPE_NR_GPIOS) + +#endif |
