diff options
| -rw-r--r-- | Documentation/w1/masters/ds2490 | 2 | ||||
| -rw-r--r-- | drivers/w1/masters/ds2490.c | 108 |
2 files changed, 86 insertions, 24 deletions
diff --git a/Documentation/w1/masters/ds2490 b/Documentation/w1/masters/ds2490 index 28176de..3e09115 100644 --- a/Documentation/w1/masters/ds2490 +++ b/Documentation/w1/masters/ds2490 @@ -21,8 +21,6 @@ Notes and limitations. - The weak pullup current is a minimum of 0.9mA and maximum of 6.0mA. - The 5V strong pullup is supported with a minimum of 5.9mA and a maximum of 30.4 mA. (From DS2490.pdf) -- While the ds2490 supports a hardware search the code doesn't take - advantage of it (in tested case it only returned first device). - The hardware will detect when devices are attached to the bus on the next bus (reset?) operation, however only a message is printed as the core w1 code doesn't make use of the information. Connecting diff --git a/drivers/w1/masters/ds2490.c b/drivers/w1/masters/ds2490.c index cd59e12..db0bf32 100644 --- a/drivers/w1/masters/ds2490.c +++ b/drivers/w1/masters/ds2490.c @@ -698,37 +698,102 @@ static int ds_write_block(struct ds_device *dev, u8 *buf, int len) return !(err == len); } -#if 0 - -static int ds_search(struct ds_device *dev, u64 init, u64 *buf, u8 id_number, int conditional_search) +static void ds9490r_search(void *data, struct w1_master *master, + u8 search_type, w1_slave_found_callback callback) { + /* When starting with an existing id, the first id returned will + * be that device (if it is still on the bus most likely). + * + * If the number of devices found is less than or equal to the + * search_limit, that number of IDs will be returned. If there are + * more, search_limit IDs will be returned followed by a non-zero + * discrepency value. + */ + struct ds_device *dev = data; int err; u16 value, index; struct ds_status st; + u8 st_buf[ST_SIZE]; + int search_limit; + int found = 0; + int i; - memset(buf, 0, sizeof(buf)); - - err = ds_send_data(ds_dev, (unsigned char *)&init, 8); - if (err) - return err; + /* DS18b20 spec, 13.16 ms per device, 75 per second, sleep for + * discovering 8 devices (1 bulk transfer and 1/2 FIFO size) at a time. + */ + const unsigned long jtime = msecs_to_jiffies(1000*8/75); + /* FIFO 128 bytes, bulk packet size 64, read a multiple of the + * packet size. + */ + u64 buf[2*64/8]; - ds_wait_status(ds_dev, &st); + /* address to start searching at */ + if (ds_send_data(dev, (u8 *)&master->search_id, 8) < 0) + return; + master->search_id = 0; + + value = COMM_SEARCH_ACCESS | COMM_IM | COMM_RST | COMM_SM | COMM_F | + COMM_RTS; + search_limit = master->max_slave_count; + if (search_limit > 255) + search_limit = 0; + index = search_type | (search_limit << 8); + if (ds_send_control(dev, value, index) < 0) + return; - value = COMM_SEARCH_ACCESS | COMM_IM | COMM_SM | COMM_F | COMM_RTS; - index = (conditional_search ? 0xEC : 0xF0) | (id_number << 8); - err = ds_send_control(ds_dev, value, index); - if (err) - return err; + do { + schedule_timeout(jtime); - ds_wait_status(ds_dev, &st); + if (ds_recv_status_nodump(dev, &st, st_buf, sizeof(st_buf)) < + sizeof(st)) { + break; + } - err = ds_recv_data(ds_dev, (unsigned char *)buf, 8*id_number); - if (err < 0) - return err; + if (st.data_in_buffer_status) { + /* Bulk in can receive partial ids, but when it does + * they fail crc and will be discarded anyway. + * That has only been seen when status in buffer + * is 0 and bulk is read anyway, so don't read + * bulk without first checking if status says there + * is data to read. + */ + err = ds_recv_data(dev, (u8 *)buf, sizeof(buf)); + if (err < 0) + break; + for (i = 0; i < err/8; ++i) { + ++found; + if (found <= search_limit) + callback(master, buf[i]); + /* can't know if there will be a discrepancy + * value after until the next id */ + if (found == search_limit) + master->search_id = buf[i]; + } + } - return err/8; + if (test_bit(W1_ABORT_SEARCH, &master->flags)) + break; + } while (!(st.status & (ST_IDLE | ST_HALT))); + + /* only continue the search if some weren't found */ + if (found <= search_limit) { + master->search_id = 0; + } else if (!test_bit(W1_WARN_MAX_COUNT, &master->flags)) { + /* Only max_slave_count will be scanned in a search, + * but it will start where it left off next search + * until all ids are identified and then it will start + * over. A continued search will report the previous + * last id as the first id (provided it is still on the + * bus). + */ + dev_info(&dev->udev->dev, "%s: max_slave_count %d reached, " + "will continue next search.\n", __func__, + master->max_slave_count); + set_bit(W1_WARN_MAX_COUNT, &master->flags); + } } +#if 0 static int ds_match_access(struct ds_device *dev, u64 init) { int err; @@ -902,6 +967,7 @@ static int ds_w1_init(struct ds_device *dev) dev->master.write_block = &ds9490r_write_block; dev->master.reset_bus = &ds9490r_reset; dev->master.set_pullup = &ds9490r_set_pullup; + dev->master.search = &ds9490r_search; return w1_add_master_device(&dev->master); } @@ -920,13 +986,11 @@ static int ds_probe(struct usb_interface *intf, struct ds_device *dev; int i, err, alt; - dev = kmalloc(sizeof(struct ds_device), GFP_KERNEL); + dev = kzalloc(sizeof(struct ds_device), GFP_KERNEL); if (!dev) { printk(KERN_INFO "Failed to allocate new DS9490R structure.\n"); return -ENOMEM; } - dev->spu_sleep = 0; - dev->spu_bit = 0; dev->udev = usb_get_dev(udev); if (!dev->udev) { err = -ENOMEM; |
