diff options
-rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-agn-calib.c | 231 |
1 files changed, 123 insertions, 108 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-calib.c b/drivers/net/wireless/iwlwifi/iwl-agn-calib.c index e2019e7..b4cfc3c 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-calib.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-calib.c @@ -732,8 +732,128 @@ static inline u8 find_first_chain(u8 mask) return CHAIN_C; } +/** + * Run disconnected antenna algorithm to find out which antennas are + * disconnected. + */ +static void iwl_find_disconn_antenna(struct iwl_priv *priv, u32* average_sig, + struct iwl_chain_noise_data *data) +{ + u32 active_chains = 0; + u32 max_average_sig; + u16 max_average_sig_antenna_i; + u8 num_tx_chains; + u8 first_chain; + u16 i = 0; + + average_sig[0] = data->chain_signal_a / + priv->cfg->base_params->chain_noise_num_beacons; + average_sig[1] = data->chain_signal_b / + priv->cfg->base_params->chain_noise_num_beacons; + average_sig[2] = data->chain_signal_c / + priv->cfg->base_params->chain_noise_num_beacons; + + if (average_sig[0] >= average_sig[1]) { + max_average_sig = average_sig[0]; + max_average_sig_antenna_i = 0; + active_chains = (1 << max_average_sig_antenna_i); + } else { + max_average_sig = average_sig[1]; + max_average_sig_antenna_i = 1; + active_chains = (1 << max_average_sig_antenna_i); + } + + if (average_sig[2] >= max_average_sig) { + max_average_sig = average_sig[2]; + max_average_sig_antenna_i = 2; + active_chains = (1 << max_average_sig_antenna_i); + } + + IWL_DEBUG_CALIB(priv, "average_sig: a %d b %d c %d\n", + average_sig[0], average_sig[1], average_sig[2]); + IWL_DEBUG_CALIB(priv, "max_average_sig = %d, antenna %d\n", + max_average_sig, max_average_sig_antenna_i); + + /* Compare signal strengths for all 3 receivers. */ + for (i = 0; i < NUM_RX_CHAINS; i++) { + if (i != max_average_sig_antenna_i) { + s32 rssi_delta = (max_average_sig - average_sig[i]); + + /* If signal is very weak, compared with + * strongest, mark it as disconnected. */ + if (rssi_delta > MAXIMUM_ALLOWED_PATHLOSS) + data->disconn_array[i] = 1; + else + active_chains |= (1 << i); + IWL_DEBUG_CALIB(priv, "i = %d rssiDelta = %d " + "disconn_array[i] = %d\n", + i, rssi_delta, data->disconn_array[i]); + } + } + + /* + * The above algorithm sometimes fails when the ucode + * reports 0 for all chains. It's not clear why that + * happens to start with, but it is then causing trouble + * because this can make us enable more chains than the + * hardware really has. + * + * To be safe, simply mask out any chains that we know + * are not on the device. + */ + if (priv->cfg->bt_params && + priv->cfg->bt_params->advanced_bt_coexist && + priv->bt_full_concurrent) { + /* operated as 1x1 in full concurrency mode */ + active_chains &= first_antenna(priv->hw_params.valid_rx_ant); + } else + active_chains &= priv->hw_params.valid_rx_ant; + + num_tx_chains = 0; + for (i = 0; i < NUM_RX_CHAINS; i++) { + /* loops on all the bits of + * priv->hw_setting.valid_tx_ant */ + u8 ant_msk = (1 << i); + if (!(priv->hw_params.valid_tx_ant & ant_msk)) + continue; + + num_tx_chains++; + if (data->disconn_array[i] == 0) + /* there is a Tx antenna connected */ + break; + if (num_tx_chains == priv->hw_params.tx_chains_num && + data->disconn_array[i]) { + /* + * If all chains are disconnected + * connect the first valid tx chain + */ + first_chain = + find_first_chain(priv->cfg->valid_tx_ant); + data->disconn_array[first_chain] = 0; + active_chains |= BIT(first_chain); + IWL_DEBUG_CALIB(priv, "All Tx chains are disconnected \ + W/A - declare %d as connected\n", + first_chain); + break; + } + } + + if (active_chains != priv->hw_params.valid_rx_ant && + active_chains != priv->chain_noise_data.active_chains) + IWL_DEBUG_CALIB(priv, + "Detected that not all antennas are connected! " + "Connected: %#x, valid: %#x.\n", + active_chains, priv->hw_params.valid_rx_ant); + + /* Save for use within RXON, TX, SCAN commands, etc. */ + data->active_chains = active_chains; + IWL_DEBUG_CALIB(priv, "active_chains (bitwise) = 0x%x\n", + active_chains); +} + + /* - * Accumulate 20 beacons of signal and noise statistics for each of + * Accumulate 16 beacons of signal and noise statistics for each of * 3 receivers/antennas/rx-chains, then figure out: * 1) Which antennas are connected. * 2) Differential rx gain settings to balance the 3 receivers. @@ -750,8 +870,6 @@ void iwl_chain_noise_calibration(struct iwl_priv *priv, void *stat_resp) u32 chain_sig_c; u32 average_sig[NUM_RX_CHAINS] = {INITIALIZATION_VALUE}; u32 average_noise[NUM_RX_CHAINS] = {INITIALIZATION_VALUE}; - u32 max_average_sig; - u16 max_average_sig_antenna_i; u32 min_average_noise = MIN_AVERAGE_NOISE_MAX_VALUE; u16 min_average_noise_antenna_i = INITIALIZATION_VALUE; u16 i = 0; @@ -759,11 +877,9 @@ void iwl_chain_noise_calibration(struct iwl_priv *priv, void *stat_resp) u16 stat_chnum = INITIALIZATION_VALUE; u8 rxon_band24; u8 stat_band24; - u32 active_chains = 0; - u8 num_tx_chains; unsigned long flags; struct statistics_rx_non_phy *rx_info; - u8 first_chain; + /* * MULTI-FIXME: * When we support multiple interfaces on different channels, @@ -869,108 +985,7 @@ void iwl_chain_noise_calibration(struct iwl_priv *priv, void *stat_resp) return; /* Analyze signal for disconnected antenna */ - average_sig[0] = data->chain_signal_a / - priv->cfg->base_params->chain_noise_num_beacons; - average_sig[1] = data->chain_signal_b / - priv->cfg->base_params->chain_noise_num_beacons; - average_sig[2] = data->chain_signal_c / - priv->cfg->base_params->chain_noise_num_beacons; - - if (average_sig[0] >= average_sig[1]) { - max_average_sig = average_sig[0]; - max_average_sig_antenna_i = 0; - active_chains = (1 << max_average_sig_antenna_i); - } else { - max_average_sig = average_sig[1]; - max_average_sig_antenna_i = 1; - active_chains = (1 << max_average_sig_antenna_i); - } - - if (average_sig[2] >= max_average_sig) { - max_average_sig = average_sig[2]; - max_average_sig_antenna_i = 2; - active_chains = (1 << max_average_sig_antenna_i); - } - - IWL_DEBUG_CALIB(priv, "average_sig: a %d b %d c %d\n", - average_sig[0], average_sig[1], average_sig[2]); - IWL_DEBUG_CALIB(priv, "max_average_sig = %d, antenna %d\n", - max_average_sig, max_average_sig_antenna_i); - - /* Compare signal strengths for all 3 receivers. */ - for (i = 0; i < NUM_RX_CHAINS; i++) { - if (i != max_average_sig_antenna_i) { - s32 rssi_delta = (max_average_sig - average_sig[i]); - - /* If signal is very weak, compared with - * strongest, mark it as disconnected. */ - if (rssi_delta > MAXIMUM_ALLOWED_PATHLOSS) - data->disconn_array[i] = 1; - else - active_chains |= (1 << i); - IWL_DEBUG_CALIB(priv, "i = %d rssiDelta = %d " - "disconn_array[i] = %d\n", - i, rssi_delta, data->disconn_array[i]); - } - } - - /* - * The above algorithm sometimes fails when the ucode - * reports 0 for all chains. It's not clear why that - * happens to start with, but it is then causing trouble - * because this can make us enable more chains than the - * hardware really has. - * - * To be safe, simply mask out any chains that we know - * are not on the device. - */ - if (priv->cfg->bt_params && - priv->cfg->bt_params->advanced_bt_coexist && - priv->bt_full_concurrent) { - /* operated as 1x1 in full concurrency mode */ - active_chains &= first_antenna(priv->hw_params.valid_rx_ant); - } else - active_chains &= priv->hw_params.valid_rx_ant; - - num_tx_chains = 0; - for (i = 0; i < NUM_RX_CHAINS; i++) { - /* loops on all the bits of - * priv->hw_setting.valid_tx_ant */ - u8 ant_msk = (1 << i); - if (!(priv->hw_params.valid_tx_ant & ant_msk)) - continue; - - num_tx_chains++; - if (data->disconn_array[i] == 0) - /* there is a Tx antenna connected */ - break; - if (num_tx_chains == priv->hw_params.tx_chains_num && - data->disconn_array[i]) { - /* - * If all chains are disconnected - * connect the first valid tx chain - */ - first_chain = - find_first_chain(priv->cfg->valid_tx_ant); - data->disconn_array[first_chain] = 0; - active_chains |= BIT(first_chain); - IWL_DEBUG_CALIB(priv, "All Tx chains are disconnected W/A - declare %d as connected\n", - first_chain); - break; - } - } - - if (active_chains != priv->hw_params.valid_rx_ant && - active_chains != priv->chain_noise_data.active_chains) - IWL_DEBUG_CALIB(priv, - "Detected that not all antennas are connected! " - "Connected: %#x, valid: %#x.\n", - active_chains, priv->hw_params.valid_rx_ant); - - /* Save for use within RXON, TX, SCAN commands, etc. */ - priv->chain_noise_data.active_chains = active_chains; - IWL_DEBUG_CALIB(priv, "active_chains (bitwise) = 0x%x\n", - active_chains); + iwl_find_disconn_antenna(priv, average_sig, data); /* Analyze noise for rx balance */ average_noise[0] = data->chain_noise_a / |