summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/devicetree/bindings/spi/spi-orion.txt19
-rw-r--r--drivers/spi/Kconfig9
-rw-r--r--drivers/spi/Makefile1
-rw-r--r--drivers/spi/spi-bcm63xx.c2
-rw-r--r--drivers/spi/spi-gpio.c3
-rw-r--r--drivers/spi/spi-imx.c14
-rw-r--r--drivers/spi/spi-omap2-mcspi.c8
-rw-r--r--drivers/spi/spi-orion.c22
-rw-r--r--drivers/spi/spi-pl022.c23
-rw-r--r--drivers/spi/spi-tegra.c89
-rw-r--r--drivers/spi/spi-xcomm.c276
-rw-r--r--drivers/spi/spi.c2
-rw-r--r--include/linux/amba/pl022.h9
13 files changed, 430 insertions, 47 deletions
diff --git a/Documentation/devicetree/bindings/spi/spi-orion.txt b/Documentation/devicetree/bindings/spi/spi-orion.txt
new file mode 100644
index 0000000..a3ff50f
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-orion.txt
@@ -0,0 +1,19 @@
+Marvell Orion SPI device
+
+Required properties:
+- compatible : should be "marvell,orion-spi".
+- reg : offset and length of the register set for the device
+- cell-index : Which of multiple SPI controllers is this.
+Optional properties:
+- interrupts : Is currently not used.
+
+Example:
+ spi@10600 {
+ compatible = "marvell,orion-spi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ reg = <0x10600 0x28>;
+ interrupts = <23>;
+ status = "disabled";
+ };
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index cd2fe35..12468e5 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -357,7 +357,7 @@ config SPI_STMP3XXX
config SPI_TEGRA
tristate "Nvidia Tegra SPI controller"
- depends on ARCH_TEGRA && TEGRA_SYSTEM_DMA
+ depends on ARCH_TEGRA && (TEGRA_SYSTEM_DMA || TEGRA20_APB_DMA)
help
SPI driver for NVidia Tegra SoCs
@@ -384,6 +384,13 @@ config SPI_TXX9
help
SPI driver for Toshiba TXx9 MIPS SoCs
+config SPI_XCOMM
+ tristate "Analog Devices AD-FMCOMMS1-EBZ SPI-I2C-bridge driver"
+ depends on I2C
+ help
+ Support for the SPI-I2C bridge found on the Analog Devices
+ AD-FMCOMMS1-EBZ board.
+
config SPI_XILINX
tristate "Xilinx SPI controller common module"
depends on HAS_IOMEM && EXPERIMENTAL
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 9d75d21..273f50d 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -61,5 +61,6 @@ obj-$(CONFIG_SPI_TI_SSP) += spi-ti-ssp.o
obj-$(CONFIG_SPI_TLE62X0) += spi-tle62x0.o
obj-$(CONFIG_SPI_TOPCLIFF_PCH) += spi-topcliff-pch.o
obj-$(CONFIG_SPI_TXX9) += spi-txx9.o
+obj-$(CONFIG_SPI_XCOMM) += spi-xcomm.o
obj-$(CONFIG_SPI_XILINX) += spi-xilinx.o
diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c
index 7491971..6e25ef1 100644
--- a/drivers/spi/spi-bcm63xx.c
+++ b/drivers/spi/spi-bcm63xx.c
@@ -129,7 +129,7 @@ static void bcm63xx_spi_setup_transfer(struct spi_device *spi,
/* Find the closest clock configuration */
for (i = 0; i < SPI_CLK_MASK; i++) {
- if (hz <= bcm63xx_spi_freq_table[i][0]) {
+ if (hz >= bcm63xx_spi_freq_table[i][0]) {
clk_cfg = bcm63xx_spi_freq_table[i][1];
break;
}
diff --git a/drivers/spi/spi-gpio.c b/drivers/spi/spi-gpio.c
index 0094c645..0b56cfc 100644
--- a/drivers/spi/spi-gpio.c
+++ b/drivers/spi/spi-gpio.c
@@ -235,7 +235,8 @@ static int spi_gpio_setup(struct spi_device *spi)
status = gpio_request(cs, dev_name(&spi->dev));
if (status)
return status;
- status = gpio_direction_output(cs, spi->mode & SPI_CS_HIGH);
+ status = gpio_direction_output(cs,
+ !(spi->mode & SPI_CS_HIGH));
}
}
if (!status)
diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 47877d6..e834ff8 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -626,7 +626,7 @@ static void spi_imx_chipselect(struct spi_device *spi, int is_active)
int active = is_active != BITBANG_CS_INACTIVE;
int dev_is_lowactive = !(spi->mode & SPI_CS_HIGH);
- if (gpio < 0)
+ if (!gpio_is_valid(gpio))
return;
gpio_set_value(gpio, dev_is_lowactive ^ active);
@@ -688,8 +688,6 @@ static int spi_imx_setupxfer(struct spi_device *spi,
config.speed_hz = spi->max_speed_hz;
if (!config.bpw)
config.bpw = spi->bits_per_word;
- if (!config.speed_hz)
- config.speed_hz = spi->max_speed_hz;
/* Initialize the functions for transfer */
if (config.bpw <= 8) {
@@ -738,7 +736,7 @@ static int spi_imx_setup(struct spi_device *spi)
dev_dbg(&spi->dev, "%s: mode %d, %u bpw, %d hz\n", __func__,
spi->mode, spi->bits_per_word, spi->max_speed_hz);
- if (gpio >= 0)
+ if (gpio_is_valid(gpio))
gpio_direction_output(gpio, spi->mode & SPI_CS_HIGH ? 0 : 1);
spi_imx_chipselect(spi, BITBANG_CS_INACTIVE);
@@ -791,11 +789,11 @@ static int __devinit spi_imx_probe(struct platform_device *pdev)
for (i = 0; i < master->num_chipselect; i++) {
int cs_gpio = of_get_named_gpio(np, "cs-gpios", i);
- if (cs_gpio < 0 && mxc_platform_info)
+ if (!gpio_is_valid(cs_gpio) && mxc_platform_info)
cs_gpio = mxc_platform_info->chipselect[i];
spi_imx->chipselect[i] = cs_gpio;
- if (cs_gpio < 0)
+ if (!gpio_is_valid(cs_gpio))
continue;
ret = gpio_request(spi_imx->chipselect[i], DRIVER_NAME);
@@ -897,7 +895,7 @@ out_release_mem:
release_mem_region(res->start, resource_size(res));
out_gpio_free:
while (--i >= 0) {
- if (spi_imx->chipselect[i] >= 0)
+ if (gpio_is_valid(spi_imx->chipselect[i]))
gpio_free(spi_imx->chipselect[i]);
}
spi_master_put(master);
@@ -922,7 +920,7 @@ static int __devexit spi_imx_remove(struct platform_device *pdev)
iounmap(spi_imx->base);
for (i = 0; i < master->num_chipselect; i++)
- if (spi_imx->chipselect[i] >= 0)
+ if (gpio_is_valid(spi_imx->chipselect[i]))
gpio_free(spi_imx->chipselect[i]);
spi_master_put(master);
diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index 0c73dd4..7d46b15 100644
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -388,7 +388,8 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer)
if (tx != NULL) {
wait_for_completion(&mcspi_dma->dma_tx_completion);
- dma_unmap_single(&spi->dev, xfer->tx_dma, count, DMA_TO_DEVICE);
+ dma_unmap_single(mcspi->dev, xfer->tx_dma, count,
+ DMA_TO_DEVICE);
/* for TX_ONLY mode, be sure all words have shifted out */
if (rx == NULL) {
@@ -403,7 +404,8 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer)
if (rx != NULL) {
wait_for_completion(&mcspi_dma->dma_rx_completion);
- dma_unmap_single(&spi->dev, xfer->rx_dma, count, DMA_FROM_DEVICE);
+ dma_unmap_single(mcspi->dev, xfer->rx_dma, count,
+ DMA_FROM_DEVICE);
omap2_mcspi_set_enable(spi, 0);
if (l & OMAP2_MCSPI_CHCONF_TURBO) {
@@ -1032,7 +1034,7 @@ static int omap2_mcspi_transfer_one_message(struct spi_master *master,
return 0;
}
-static int __init omap2_mcspi_master_setup(struct omap2_mcspi *mcspi)
+static int __devinit omap2_mcspi_master_setup(struct omap2_mcspi *mcspi)
{
struct spi_master *master = mcspi->master;
struct omap2_mcspi_regs *ctx = &mcspi->ctx;
diff --git a/drivers/spi/spi-orion.c b/drivers/spi/spi-orion.c
index dfd04e9..9b0cadd 100644
--- a/drivers/spi/spi-orion.c
+++ b/drivers/spi/spi-orion.c
@@ -17,6 +17,7 @@
#include <linux/io.h>
#include <linux/spi/spi.h>
#include <linux/module.h>
+#include <linux/of.h>
#include <linux/clk.h>
#include <asm/unaligned.h>
@@ -45,7 +46,6 @@ struct orion_spi {
void __iomem *base;
unsigned int max_speed;
unsigned int min_speed;
- struct orion_spi_info *spi_info;
struct clk *clk;
};
@@ -450,11 +450,10 @@ static int __init orion_spi_probe(struct platform_device *pdev)
struct spi_master *master;
struct orion_spi *spi;
struct resource *r;
- struct orion_spi_info *spi_info;
unsigned long tclk_hz;
int status = 0;
-
- spi_info = pdev->dev.platform_data;
+ const u32 *iprop;
+ int size;
master = spi_alloc_master(&pdev->dev, sizeof *spi);
if (master == NULL) {
@@ -464,6 +463,12 @@ static int __init orion_spi_probe(struct platform_device *pdev)
if (pdev->id != -1)
master->bus_num = pdev->id;
+ if (pdev->dev.of_node) {
+ iprop = of_get_property(pdev->dev.of_node, "cell-index",
+ &size);
+ if (iprop && size == sizeof(*iprop))
+ master->bus_num = *iprop;
+ }
/* we support only mode 0, and no options */
master->mode_bits = 0;
@@ -476,7 +481,6 @@ static int __init orion_spi_probe(struct platform_device *pdev)
spi = spi_master_get_devdata(master);
spi->master = master;
- spi->spi_info = spi_info;
spi->clk = clk_get(&pdev->dev, NULL);
if (IS_ERR(spi->clk)) {
@@ -511,6 +515,7 @@ static int __init orion_spi_probe(struct platform_device *pdev)
if (orion_spi_reset(spi) < 0)
goto out_rel_mem;
+ master->dev.of_node = pdev->dev.of_node;
status = spi_register_master(master);
if (status < 0)
goto out_rel_mem;
@@ -552,10 +557,17 @@ static int __exit orion_spi_remove(struct platform_device *pdev)
MODULE_ALIAS("platform:" DRIVER_NAME);
+static const struct of_device_id orion_spi_of_match_table[] __devinitdata = {
+ { .compatible = "marvell,orion-spi", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, orion_spi_of_match_table);
+
static struct platform_driver orion_spi_driver = {
.driver = {
.name = DRIVER_NAME,
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(orion_spi_of_match_table),
},
.remove = __exit_p(orion_spi_remove),
};
diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c
index 400ae21..aab518e 100644
--- a/drivers/spi/spi-pl022.c
+++ b/drivers/spi/spi-pl022.c
@@ -489,6 +489,11 @@ static void giveback(struct pl022 *pl022)
pl022->cur_transfer = NULL;
pl022->cur_chip = NULL;
spi_finalize_current_message(pl022->master);
+
+ /* disable the SPI/SSP operation */
+ writew((readw(SSP_CR1(pl022->virtbase)) &
+ (~SSP_CR1_MASK_SSE)), SSP_CR1(pl022->virtbase));
+
}
/**
@@ -2048,6 +2053,9 @@ pl022_probe(struct amba_device *adev, const struct amba_id *id)
printk(KERN_INFO "pl022: mapped registers from 0x%08x to %p\n",
adev->res.start, pl022->virtbase);
+ pm_runtime_enable(dev);
+ pm_runtime_resume(dev);
+
pl022->clk = clk_get(&adev->dev, NULL);
if (IS_ERR(pl022->clk)) {
status = PTR_ERR(pl022->clk);
@@ -2158,6 +2166,7 @@ pl022_remove(struct amba_device *adev)
clk_disable(pl022->clk);
clk_unprepare(pl022->clk);
clk_put(pl022->clk);
+ pm_runtime_disable(&adev->dev);
iounmap(pl022->virtbase);
amba_release_regions(adev);
tasklet_disable(&pl022->pump_transfers);
@@ -2251,15 +2260,6 @@ static struct vendor_data vendor_st_pl023 = {
.loopback = false,
};
-static struct vendor_data vendor_db5500_pl023 = {
- .fifodepth = 32,
- .max_bpw = 32,
- .unidir = false,
- .extended_cr = true,
- .pl023 = true,
- .loopback = true,
-};
-
static struct amba_id pl022_ids[] = {
{
/*
@@ -2291,11 +2291,6 @@ static struct amba_id pl022_ids[] = {
.mask = 0xffffffff,
.data = &vendor_st_pl023,
},
- {
- .id = 0x10080023,
- .mask = 0xffffffff,
- .data = &vendor_db5500_pl023,
- },
{ 0, 0 },
};
diff --git a/drivers/spi/spi-tegra.c b/drivers/spi/spi-tegra.c
index ae6d78a..956ff4a 100644
--- a/drivers/spi/spi-tegra.c
+++ b/drivers/spi/spi-tegra.c
@@ -30,6 +30,7 @@
#include <linux/delay.h>
#include <linux/spi/spi.h>
+#include <linux/dmaengine.h>
#include <mach/dma.h>
@@ -162,12 +163,23 @@ struct spi_tegra_data {
* require transfers to be 4 byte aligned we need a bounce buffer
* for the generic case.
*/
+ int dma_req_len;
+#if defined(CONFIG_TEGRA_SYSTEM_DMA)
struct tegra_dma_req rx_dma_req;
struct tegra_dma_channel *rx_dma;
+#else
+ struct dma_chan *rx_dma;
+ struct dma_slave_config sconfig;
+ struct dma_async_tx_descriptor *rx_dma_desc;
+ dma_cookie_t rx_cookie;
+#endif
u32 *rx_bb;
dma_addr_t rx_bb_phys;
};
+#if !defined(CONFIG_TEGRA_SYSTEM_DMA)
+static void tegra_spi_rx_dma_complete(void *args);
+#endif
static inline unsigned long spi_tegra_readl(struct spi_tegra_data *tspi,
unsigned long reg)
@@ -190,10 +202,24 @@ static void spi_tegra_go(struct spi_tegra_data *tspi)
val = spi_tegra_readl(tspi, SLINK_DMA_CTL);
val &= ~SLINK_DMA_BLOCK_SIZE(~0) & ~SLINK_DMA_EN;
- val |= SLINK_DMA_BLOCK_SIZE(tspi->rx_dma_req.size / 4 - 1);
+ val |= SLINK_DMA_BLOCK_SIZE(tspi->dma_req_len / 4 - 1);
spi_tegra_writel(tspi, val, SLINK_DMA_CTL);
-
+#if defined(CONFIG_TEGRA_SYSTEM_DMA)
+ tspi->rx_dma_req.size = tspi->dma_req_len;
tegra_dma_enqueue_req(tspi->rx_dma, &tspi->rx_dma_req);
+#else
+ tspi->rx_dma_desc = dmaengine_prep_slave_single(tspi->rx_dma,
+ tspi->rx_bb_phys, tspi->dma_req_len,
+ DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT);
+ if (!tspi->rx_dma_desc) {
+ dev_err(&tspi->pdev->dev, "dmaengine slave prep failed\n");
+ return;
+ }
+ tspi->rx_dma_desc->callback = tegra_spi_rx_dma_complete;
+ tspi->rx_dma_desc->callback_param = tspi;
+ tspi->rx_cookie = dmaengine_submit(tspi->rx_dma_desc);
+ dma_async_issue_pending(tspi->rx_dma);
+#endif
val |= SLINK_DMA_EN;
spi_tegra_writel(tspi, val, SLINK_DMA_CTL);
@@ -221,7 +247,7 @@ static unsigned spi_tegra_fill_tx_fifo(struct spi_tegra_data *tspi,
spi_tegra_writel(tspi, val, SLINK_TX_FIFO);
}
- tspi->rx_dma_req.size = len / tspi->cur_bytes_per_word * 4;
+ tspi->dma_req_len = len / tspi->cur_bytes_per_word * 4;
return len;
}
@@ -318,9 +344,8 @@ static void spi_tegra_start_message(struct spi_device *spi,
spi_tegra_start_transfer(spi, t);
}
-static void tegra_spi_rx_dma_complete(struct tegra_dma_req *req)
+static void handle_spi_rx_dma_complete(struct spi_tegra_data *tspi)
{
- struct spi_tegra_data *tspi = req->dev;
unsigned long flags;
struct spi_message *m;
struct spi_device *spi;
@@ -380,6 +405,19 @@ static void tegra_spi_rx_dma_complete(struct tegra_dma_req *req)
spin_unlock_irqrestore(&tspi->lock, flags);
}
+#if defined(CONFIG_TEGRA_SYSTEM_DMA)
+static void tegra_spi_rx_dma_complete(struct tegra_dma_req *req)
+{
+ struct spi_tegra_data *tspi = req->dev;
+ handle_spi_rx_dma_complete(tspi);
+}
+#else
+static void tegra_spi_rx_dma_complete(void *args)
+{
+ struct spi_tegra_data *tspi = args;
+ handle_spi_rx_dma_complete(tspi);
+}
+#endif
static int spi_tegra_setup(struct spi_device *spi)
{
@@ -471,6 +509,9 @@ static int __devinit spi_tegra_probe(struct platform_device *pdev)
struct spi_tegra_data *tspi;
struct resource *r;
int ret;
+#if !defined(CONFIG_TEGRA_SYSTEM_DMA)
+ dma_cap_mask_t mask;
+#endif
master = spi_alloc_master(&pdev->dev, sizeof *tspi);
if (master == NULL) {
@@ -522,12 +563,24 @@ static int __devinit spi_tegra_probe(struct platform_device *pdev)
INIT_LIST_HEAD(&tspi->queue);
+#if defined(CONFIG_TEGRA_SYSTEM_DMA)
tspi->rx_dma = tegra_dma_allocate_channel(TEGRA_DMA_MODE_ONESHOT);
if (!tspi->rx_dma) {
dev_err(&pdev->dev, "can not allocate rx dma channel\n");
ret = -ENODEV;
goto err3;
}
+#else
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+ tspi->rx_dma = dma_request_channel(mask, NULL, NULL);
+ if (!tspi->rx_dma) {
+ dev_err(&pdev->dev, "can not allocate rx dma channel\n");
+ ret = -ENODEV;
+ goto err3;
+ }
+
+#endif
tspi->rx_bb = dma_alloc_coherent(&pdev->dev, sizeof(u32) * BB_LEN,
&tspi->rx_bb_phys, GFP_KERNEL);
@@ -537,6 +590,7 @@ static int __devinit spi_tegra_probe(struct platform_device *pdev)
goto err4;
}
+#if defined(CONFIG_TEGRA_SYSTEM_DMA)
tspi->rx_dma_req.complete = tegra_spi_rx_dma_complete;
tspi->rx_dma_req.to_memory = 1;
tspi->rx_dma_req.dest_addr = tspi->rx_bb_phys;
@@ -546,6 +600,23 @@ static int __devinit spi_tegra_probe(struct platform_device *pdev)
tspi->rx_dma_req.source_wrap = 4;
tspi->rx_dma_req.req_sel = spi_tegra_req_sels[pdev->id];
tspi->rx_dma_req.dev = tspi;
+#else
+ /* Dmaengine Dma slave config */
+ tspi->sconfig.src_addr = tspi->phys + SLINK_RX_FIFO;
+ tspi->sconfig.dst_addr = tspi->phys + SLINK_RX_FIFO;
+ tspi->sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ tspi->sconfig.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ tspi->sconfig.slave_id = spi_tegra_req_sels[pdev->id];
+ tspi->sconfig.src_maxburst = 1;
+ tspi->sconfig.dst_maxburst = 1;
+ ret = dmaengine_device_control(tspi->rx_dma,
+ DMA_SLAVE_CONFIG, (unsigned long) &tspi->sconfig);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "can not do slave configure for dma %d\n",
+ ret);
+ goto err4;
+ }
+#endif
master->dev.of_node = pdev->dev.of_node;
ret = spi_register_master(master);
@@ -559,7 +630,11 @@ err5:
dma_free_coherent(&pdev->dev, sizeof(u32) * BB_LEN,
tspi->rx_bb, tspi->rx_bb_phys);
err4:
+#if defined(CONFIG_TEGRA_SYSTEM_DMA)
tegra_dma_free_channel(tspi->rx_dma);
+#else
+ dma_release_channel(tspi->rx_dma);
+#endif
err3:
clk_put(tspi->clk);
err2:
@@ -581,7 +656,11 @@ static int __devexit spi_tegra_remove(struct platform_device *pdev)
tspi = spi_master_get_devdata(master);
spi_unregister_master(master);
+#if defined(CONFIG_TEGRA_SYSTEM_DMA)
tegra_dma_free_channel(tspi->rx_dma);
+#else
+ dma_release_channel(tspi->rx_dma);
+#endif
dma_free_coherent(&pdev->dev, sizeof(u32) * BB_LEN,
tspi->rx_bb, tspi->rx_bb_phys);
diff --git a/drivers/spi/spi-xcomm.c b/drivers/spi/spi-xcomm.c
new file mode 100644
index 0000000..266a847
--- /dev/null
+++ b/drivers/spi/spi-xcomm.c
@@ -0,0 +1,276 @@
+/*
+ * Analog Devices AD-FMCOMMS1-EBZ board I2C-SPI bridge driver
+ *
+ * Copyright 2012 Analog Devices Inc.
+ * Author: Lars-Peter Clausen <lars@metafoo.de>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/spi/spi.h>
+#include <asm/unaligned.h>
+
+#define SPI_XCOMM_SETTINGS_LEN_OFFSET 10
+#define SPI_XCOMM_SETTINGS_3WIRE BIT(6)
+#define SPI_XCOMM_SETTINGS_CS_HIGH BIT(5)
+#define SPI_XCOMM_SETTINGS_SAMPLE_END BIT(4)
+#define SPI_XCOMM_SETTINGS_CPHA BIT(3)
+#define SPI_XCOMM_SETTINGS_CPOL BIT(2)
+#define SPI_XCOMM_SETTINGS_CLOCK_DIV_MASK 0x3
+#define SPI_XCOMM_SETTINGS_CLOCK_DIV_64 0x2
+#define SPI_XCOMM_SETTINGS_CLOCK_DIV_16 0x1
+#define SPI_XCOMM_SETTINGS_CLOCK_DIV_4 0x0
+
+#define SPI_XCOMM_CMD_UPDATE_CONFIG 0x03
+#define SPI_XCOMM_CMD_WRITE 0x04
+
+#define SPI_XCOMM_CLOCK 48000000
+
+struct spi_xcomm {
+ struct i2c_client *i2c;
+
+ uint16_t settings;
+ uint16_t chipselect;
+
+ unsigned int current_speed;
+
+ uint8_t buf[63];
+};
+
+static int spi_xcomm_sync_config(struct spi_xcomm *spi_xcomm, unsigned int len)
+{
+ uint16_t settings;
+ uint8_t *buf = spi_xcomm->buf;
+
+ settings = spi_xcomm->settings;
+ settings |= len << SPI_XCOMM_SETTINGS_LEN_OFFSET;
+
+ buf[0] = SPI_XCOMM_CMD_UPDATE_CONFIG;
+ put_unaligned_be16(settings, &buf[1]);
+ put_unaligned_be16(spi_xcomm->chipselect, &buf[3]);
+
+ return i2c_master_send(spi_xcomm->i2c, buf, 5);
+}
+
+static void spi_xcomm_chipselect(struct spi_xcomm *spi_xcomm,
+ struct spi_device *spi, int is_active)
+{
+ unsigned long cs = spi->chip_select;
+ uint16_t chipselect = spi_xcomm->chipselect;
+
+ if (is_active)
+ chipselect |= BIT(cs);
+ else
+ chipselect &= ~BIT(cs);
+
+ spi_xcomm->chipselect = chipselect;
+}
+
+static int spi_xcomm_setup_transfer(struct spi_xcomm *spi_xcomm,
+ struct spi_device *spi, struct spi_transfer *t, unsigned int *settings)
+{
+ unsigned int speed;
+
+ if ((t->bits_per_word && t->bits_per_word != 8) || t->len > 62)
+ return -EINVAL;
+
+ speed = t->speed_hz ? t->speed_hz : spi->max_speed_hz;
+
+ if (speed != spi_xcomm->current_speed) {
+ unsigned int divider = DIV_ROUND_UP(SPI_XCOMM_CLOCK, speed);
+ if (divider >= 64)
+ *settings |= SPI_XCOMM_SETTINGS_CLOCK_DIV_64;
+ else if (divider >= 16)
+ *settings |= SPI_XCOMM_SETTINGS_CLOCK_DIV_16;
+ else
+ *settings |= SPI_XCOMM_SETTINGS_CLOCK_DIV_4;
+
+ spi_xcomm->current_speed = speed;
+ }
+
+ if (spi->mode & SPI_CPOL)
+ *settings |= SPI_XCOMM_SETTINGS_CPOL;
+ else
+ *settings &= ~SPI_XCOMM_SETTINGS_CPOL;
+
+ if (spi->mode & SPI_CPHA)
+ *settings &= ~SPI_XCOMM_SETTINGS_CPHA;
+ else
+ *settings |= SPI_XCOMM_SETTINGS_CPHA;
+
+ if (spi->mode & SPI_3WIRE)
+ *settings |= SPI_XCOMM_SETTINGS_3WIRE;
+ else
+ *settings &= ~SPI_XCOMM_SETTINGS_3WIRE;
+
+ return 0;
+}
+
+static int spi_xcomm_txrx_bufs(struct spi_xcomm *spi_xcomm,
+ struct spi_device *spi, struct spi_transfer *t)
+{
+ int ret;
+
+ if (t->tx_buf) {
+ spi_xcomm->buf[0] = SPI_XCOMM_CMD_WRITE;
+ memcpy(spi_xcomm->buf + 1, t->tx_buf, t->len);
+
+ ret = i2c_master_send(spi_xcomm->i2c, spi_xcomm->buf, t->len + 1);
+ if (ret < 0)
+ return ret;
+ else if (ret != t->len + 1)
+ return -EIO;
+ } else if (t->rx_buf) {
+ ret = i2c_master_recv(spi_xcomm->i2c, t->rx_buf, t->len);
+ if (ret < 0)
+ return ret;
+ else if (ret != t->len)
+ return -EIO;
+ }
+
+ return t->len;
+}
+
+static int spi_xcomm_transfer_one(struct spi_master *master,
+ struct spi_message *msg)
+{
+ struct spi_xcomm *spi_xcomm = spi_master_get_devdata(master);
+ unsigned int settings = spi_xcomm->settings;
+ struct spi_device *spi = msg->spi;
+ unsigned cs_change = 0;
+ struct spi_transfer *t;
+ bool is_first = true;
+ int status = 0;
+ bool is_last;
+
+ is_first = true;
+
+ spi_xcomm_chipselect(spi_xcomm, spi, true);
+
+ list_for_each_entry(t, &msg->transfers, transfer_list) {
+
+ if (!t->tx_buf && !t->rx_buf && t->len) {
+ status = -EINVAL;
+ break;
+ }
+
+ status = spi_xcomm_setup_transfer(spi_xcomm, spi, t, &settings);
+ if (status < 0)
+ break;
+
+ is_last = list_is_last(&t->transfer_list, &msg->transfers);
+ cs_change = t->cs_change;
+
+ if (cs_change ^ is_last)
+ settings |= BIT(5);
+ else
+ settings &= ~BIT(5);
+
+ if (t->rx_buf) {
+ spi_xcomm->settings = settings;
+ status = spi_xcomm_sync_config(spi_xcomm, t->len);
+ if (status < 0)
+ break;
+ } else if (settings != spi_xcomm->settings || is_first) {
+ spi_xcomm->settings = settings;
+ status = spi_xcomm_sync_config(spi_xcomm, 0);
+ if (status < 0)
+ break;
+ }
+
+ if (t->len) {
+ status = spi_xcomm_txrx_bufs(spi_xcomm, spi, t);
+
+ if (status < 0)
+ break;
+
+ if (status > 0)
+ msg->actual_length += status;
+ }
+ status = 0;
+
+ if (t->delay_usecs)
+ udelay(t->delay_usecs);
+
+ is_first = false;
+ }
+
+ if (status != 0 || !cs_change)
+ spi_xcomm_chipselect(spi_xcomm, spi, false);
+
+ msg->status = status;
+ spi_finalize_current_message(master);
+
+ return status;
+}
+
+static int spi_xcomm_setup(struct spi_device *spi)
+{
+ if (spi->bits_per_word != 8)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int __devinit spi_xcomm_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct spi_xcomm *spi_xcomm;
+ struct spi_master *master;
+ int ret;
+
+ master = spi_alloc_master(&i2c->dev, sizeof(*spi_xcomm));
+ if (!master)
+ return -ENOMEM;
+
+ spi_xcomm = spi_master_get_devdata(master);
+ spi_xcomm->i2c = i2c;
+
+ master->num_chipselect = 16;
+ master->mode_bits = SPI_CPHA | SPI_CPOL | SPI_3WIRE;
+ master->flags = SPI_MASTER_HALF_DUPLEX;
+ master->setup = spi_xcomm_setup;
+ master->transfer_one_message = spi_xcomm_transfer_one;
+ master->dev.of_node = i2c->dev.of_node;
+ i2c_set_clientdata(i2c, master);
+
+ ret = spi_register_master(master);
+ if (ret < 0)
+ spi_master_put(master);
+
+ return ret;
+}
+
+static int __devexit spi_xcomm_remove(struct i2c_client *i2c)
+{
+ struct spi_master *master = i2c_get_clientdata(i2c);
+
+ spi_unregister_master(master);
+
+ return 0;
+}
+
+static const struct i2c_device_id spi_xcomm_ids[] = {
+ { "spi-xcomm" },
+ { },
+};
+
+static struct i2c_driver spi_xcomm_driver = {
+ .driver = {
+ .name = "spi-xcomm",
+ .owner = THIS_MODULE,
+ },
+ .id_table = spi_xcomm_ids,
+ .probe = spi_xcomm_probe,
+ .remove = __devexit_p(spi_xcomm_remove),
+};
+module_i2c_driver(spi_xcomm_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("Analog Devices AD-FMCOMMS1-EBZ board I2C-SPI bridge driver");
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 1041cb8..84c2861 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -53,7 +53,7 @@ modalias_show(struct device *dev, struct device_attribute *a, char *buf)
{
const struct spi_device *spi = to_spi_device(dev);
- return sprintf(buf, "%s\n", spi->modalias);
+ return sprintf(buf, "%s%s\n", SPI_MODULE_PREFIX, spi->modalias);
}
static struct device_attribute spi_dev_attrs[] = {
diff --git a/include/linux/amba/pl022.h b/include/linux/amba/pl022.h
index 76dd1b1..fe1d7b2 100644
--- a/include/linux/amba/pl022.h
+++ b/include/linux/amba/pl022.h
@@ -231,6 +231,7 @@ enum ssp_chip_select {
struct dma_chan;
/**
* struct pl022_ssp_master - device.platform_data for SPI controller devices.
+ * @bus_id: identifier for this bus
* @num_chipselect: chipselects are used to distinguish individual
* SPI slaves, and are numbered from zero to num_chipselects - 1.
* each slave has a chipselect signal, but it's common that not
@@ -259,19 +260,13 @@ struct pl022_ssp_controller {
* struct ssp_config_chip - spi_board_info.controller_data for SPI
* slave devices, copied to spi_device.controller_data.
*
- * @lbm: used for test purpose to internally connect RX and TX
* @iface: Interface type(Motorola, TI, Microwire, Universal)
* @hierarchy: sets whether interface is master or slave
* @slave_tx_disable: SSPTXD is disconnected (in slave mode only)
* @clk_freq: Tune freq parameters of SSP(when in master mode)
- * @endian_rx: Endianess of Data in Rx FIFO
- * @endian_tx: Endianess of Data in Tx FIFO
- * @data_size: Width of data element(4 to 32 bits)
* @com_mode: communication mode: polling, Interrupt or DMA
* @rx_lev_trig: Rx FIFO watermark level (for IT & DMA mode)
* @tx_lev_trig: Tx FIFO watermark level (for IT & DMA mode)
- * @clk_phase: Motorola SPI interface Clock phase
- * @clk_pol: Motorola SPI interface Clock polarity
* @ctrl_len: Microwire interface: Control length
* @wait_state: Microwire interface: Wait state
* @duplex: Microwire interface: Full/Half duplex
@@ -279,8 +274,6 @@ struct pl022_ssp_controller {
* before sampling the incoming line
* @cs_control: function pointer to board-specific function to
* assert/deassert I/O port to control HW generation of devices chip-select.
- * @dma_xfer_type: Type of DMA xfer (Mem-to-periph or Periph-to-Periph)
- * @dma_config: DMA configuration for SSP controller and peripheral
*/
struct pl022_config_chip {
enum ssp_interface iface;
OpenPOWER on IntegriCloud