diff options
| -rw-r--r-- | arch/arm/mach-s3c64xx/Kconfig | 1 | ||||
| -rw-r--r-- | arch/arm/mach-s3c64xx/Makefile | 2 | ||||
| -rw-r--r-- | arch/arm/mach-s3c64xx/include/mach/crag6410.h | 23 | ||||
| -rw-r--r-- | arch/arm/mach-s3c64xx/mach-crag6410-module.c | 173 | ||||
| -rw-r--r-- | arch/arm/mach-s3c64xx/mach-crag6410.c | 85 |
5 files changed, 203 insertions, 81 deletions
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig index f057b6a..5552e04 100644 --- a/arch/arm/mach-s3c64xx/Kconfig +++ b/arch/arm/mach-s3c64xx/Kconfig @@ -288,5 +288,6 @@ config MACH_WLF_CRAGG_6410 select S3C_DEV_RTC select S3C64XX_DEV_SPI select S3C24XX_GPIO_EXTRA128 + select I2C help Machine support for the Wolfson Cragganmore S3C6410 variant. diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile index 61b4034..5fdea6a 100644 --- a/arch/arm/mach-s3c64xx/Makefile +++ b/arch/arm/mach-s3c64xx/Makefile @@ -55,7 +55,7 @@ obj-$(CONFIG_MACH_HMT) += mach-hmt.o obj-$(CONFIG_MACH_SMARTQ) += mach-smartq.o obj-$(CONFIG_MACH_SMARTQ5) += mach-smartq5.o obj-$(CONFIG_MACH_SMARTQ7) += mach-smartq7.o -obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o +obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o mach-crag6410-module.o # device support diff --git a/arch/arm/mach-s3c64xx/include/mach/crag6410.h b/arch/arm/mach-s3c64xx/include/mach/crag6410.h new file mode 100644 index 0000000..be9074e --- /dev/null +++ b/arch/arm/mach-s3c64xx/include/mach/crag6410.h @@ -0,0 +1,23 @@ +/* Cragganmore 6410 shared definitions + * + * Copyright 2011 Wolfson Microelectronics plc + * Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef MACH_CRAG6410_H +#define MACH_CRAG6410_H + +#include <linux/gpio.h> + +#define BANFF_PMIC_IRQ_BASE IRQ_BOARD_START +#define GLENFARCLAS_PMIC_IRQ_BASE (IRQ_BOARD_START + 64) + +#define PCA935X_GPIO_BASE GPIO_BOARD_START +#define CODEC_GPIO_BASE (GPIO_BOARD_START + 8) +#define GLENFARCLAS_PMIC_GPIO_BASE (GPIO_BOARD_START + 16) + +#endif diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c new file mode 100644 index 0000000..0708fa0 --- /dev/null +++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c @@ -0,0 +1,173 @@ +/* Speyside modules for Cragganmore - board data probing + * + * Copyright 2011 Wolfson Microelectronics plc + * Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/i2c.h> + +#include <linux/mfd/wm831x/irq.h> +#include <linux/mfd/wm831x/gpio.h> + +#include <sound/wm8996.h> +#include <sound/wm8962.h> +#include <sound/wm9081.h> + +#include <mach/crag6410.h> + +static struct wm8996_retune_mobile_config wm8996_retune[] = { + { + .name = "Sub LPF", + .rate = 48000, + .regs = { + 0x6318, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000, + 0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000, + 0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000 + }, + }, + { + .name = "Sub HPF", + .rate = 48000, + .regs = { + 0x000A, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000, + 0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000, + 0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000 + }, + }, +}; + +static struct wm8996_pdata wm8996_pdata __initdata = { + .ldo_ena = S3C64XX_GPN(7), + .gpio_base = CODEC_GPIO_BASE, + .micdet_def = 1, + .inl_mode = WM8996_DIFFERRENTIAL_1, + .inr_mode = WM8996_DIFFERRENTIAL_1, + + .irq_flags = IRQF_TRIGGER_RISING, + + .gpio_default = { + 0x8001, /* GPIO1 == ADCLRCLK1 */ + 0x8001, /* GPIO2 == ADCLRCLK2, input due to CPU */ + 0x0141, /* GPIO3 == HP_SEL */ + 0x0002, /* GPIO4 == IRQ */ + 0x020e, /* GPIO5 == CLKOUT */ + }, + + .retune_mobile_cfgs = wm8996_retune, + .num_retune_mobile_cfgs = ARRAY_SIZE(wm8996_retune), +}; + +static struct wm8962_pdata wm8962_pdata __initdata = { + .gpio_init = { + 0, + WM8962_GPIO_FN_OPCLK, + WM8962_GPIO_FN_DMICCLK, + 0, + 0x8000 | WM8962_GPIO_FN_DMICDAT, + WM8962_GPIO_FN_IRQ, /* Open drain mode */ + }, + .irq_active_low = true, +}; + +static struct wm9081_pdata wm9081_pdata __initdata = { + .irq_high = false, + .irq_cmos = false, +}; + +static const struct i2c_board_info wm1254_devs[] = { + { I2C_BOARD_INFO("wm8996", 0x1a), + .platform_data = &wm8996_pdata, + .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, + }, + { I2C_BOARD_INFO("wm9081", 0x6c), + .platform_data = &wm9081_pdata, }, +}; + +static const struct i2c_board_info wm1259_devs[] = { + { I2C_BOARD_INFO("wm8962", 0x1a), + .platform_data = &wm8962_pdata, + .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, + }, +}; + + +static __devinitdata const struct { + u8 id; + const char *name; + const struct i2c_board_info *i2c_devs; + int num_i2c_devs; +} gf_mods[] = { + { .id = 0x01, .name = "1250-EV1 Springbank" }, + { .id = 0x02, .name = "1251-EV1 Jura" }, + { .id = 0x03, .name = "1252-EV1 Glenlivet" }, + { .id = 0x11, .name = "6249-EV2 Glenfarclas", }, + { .id = 0x21, .name = "1275-EV1 Mortlach" }, + { .id = 0x25, .name = "1274-EV1 Glencadam" }, + { .id = 0x31, .name = "1253-EV1 Tomatin", }, + { .id = 0x39, .name = "1254-EV1 Dallas Dhu", + .i2c_devs = wm1254_devs, .num_i2c_devs = ARRAY_SIZE(wm1254_devs) }, + { .id = 0x3a, .name = "1259-EV1 Tobermory", + .i2c_devs = wm1259_devs, .num_i2c_devs = ARRAY_SIZE(wm1259_devs) }, + { .id = 0x3b, .name = "1255-EV1 Kilchoman" }, + { .id = 0x3c, .name = "1273-EV1 Longmorn" }, +}; + +static __devinit int wlf_gf_module_probe(struct i2c_client *i2c, + const struct i2c_device_id *i2c_id) +{ + int ret, i, j, id, rev; + + ret = i2c_smbus_read_byte_data(i2c, 0); + if (ret < 0) { + dev_err(&i2c->dev, "Failed to read ID: %d\n", ret); + return ret; + } + + id = (ret & 0xfe) >> 2; + rev = ret & 0x3; + for (i = 0; i < ARRAY_SIZE(gf_mods); i++) + if (id == gf_mods[i].id) + break; + + if (i < ARRAY_SIZE(gf_mods)) { + dev_info(&i2c->dev, "%s revision %d\n", + gf_mods[i].name, rev + 1); + for (j = 0; j < gf_mods[i].num_i2c_devs; j++) { + if (!i2c_new_device(i2c->adapter, + &(gf_mods[i].i2c_devs[j]))) + dev_err(&i2c->dev, + "Failed to register dev: %d\n", ret); + } + } else { + dev_warn(&i2c->dev, "Unknown module ID %d revision %d\n", + id, rev); + } + + return 0; +} + +static const struct i2c_device_id wlf_gf_module_id[] = { + { "wlf-gf-module", 0 }, + { } +}; + +static struct i2c_driver wlf_gf_module_driver = { + .driver = { + .name = "wlf-gf-module", + .owner = THIS_MODULE, + }, + .probe = wlf_gf_module_probe, + .id_table = wlf_gf_module_id, +}; + +static int __init wlf_gf_module_register(void) +{ + return i2c_add_driver(&wlf_gf_module_driver); +} +module_init(wlf_gf_module_register); diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index 5affb26..1ef53b2 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -47,6 +47,7 @@ #include <mach/regs-sys.h> #include <mach/regs-gpio.h> #include <mach/regs-modem.h> +#include <mach/crag6410.h> #include <mach/regs-gpio-memport.h> @@ -65,17 +66,6 @@ #include <plat/iic.h> #include <plat/pm.h> -#include <sound/wm8996.h> -#include <sound/wm8962.h> -#include <sound/wm9081.h> - -#define BANFF_PMIC_IRQ_BASE IRQ_BOARD_START -#define GLENFARCLAS_PMIC_IRQ_BASE (IRQ_BOARD_START + 64) - -#define PCA935X_GPIO_BASE GPIO_BOARD_START -#define CODEC_GPIO_BASE (GPIO_BOARD_START + 8) -#define GLENFARCLAS_PMIC_GPIO_BASE (GPIO_BOARD_START + 16) - /* serial port setup */ #define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK) @@ -623,81 +613,16 @@ static struct wm831x_pdata glenfarclas_pmic_pdata __initdata = { .disable_touch = true, }; -static struct wm8996_retune_mobile_config wm8996_retune[] = { - { - .name = "Sub LPF", - .rate = 48000, - .regs = { - 0x6318, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000, - 0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000, - 0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000 - }, - }, - { - .name = "Sub HPF", - .rate = 48000, - .regs = { - 0x000A, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000, - 0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000, - 0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000 - }, - }, -}; - -static struct wm8996_pdata wm8996_pdata __initdata = { - .ldo_ena = S3C64XX_GPN(7), - .gpio_base = CODEC_GPIO_BASE, - .micdet_def = 1, - .inl_mode = WM8996_DIFFERRENTIAL_1, - .inr_mode = WM8996_DIFFERRENTIAL_1, - - .irq_flags = IRQF_TRIGGER_RISING, - - .gpio_default = { - 0x8001, /* GPIO1 == ADCLRCLK1 */ - 0x8001, /* GPIO2 == ADCLRCLK2, input due to CPU */ - 0x0141, /* GPIO3 == HP_SEL */ - 0x0002, /* GPIO4 == IRQ */ - 0x020e, /* GPIO5 == CLKOUT */ - }, - - .retune_mobile_cfgs = wm8996_retune, - .num_retune_mobile_cfgs = ARRAY_SIZE(wm8996_retune), -}; - -static struct wm8962_pdata wm8962_pdata __initdata = { - .gpio_init = { - 0, - WM8962_GPIO_FN_OPCLK, - WM8962_GPIO_FN_DMICCLK, - 0, - 0x8000 | WM8962_GPIO_FN_DMICDAT, - WM8962_GPIO_FN_IRQ, /* Open drain mode */ - }, - .irq_active_low = true, -}; - -static struct wm9081_pdata wm9081_pdata __initdata = { - .irq_high = false, - .irq_cmos = false, -}; - static struct i2c_board_info i2c_devs1[] __initdata = { { I2C_BOARD_INFO("wm8311", 0x34), .irq = S3C_EINT(0), .platform_data = &glenfarclas_pmic_pdata }, + { I2C_BOARD_INFO("wlf-gf-module", 0x24) }, + { I2C_BOARD_INFO("wlf-gf-module", 0x25) }, + { I2C_BOARD_INFO("wlf-gf-module", 0x26) }, + { I2C_BOARD_INFO("wm1250-ev1", 0x27) }, - { I2C_BOARD_INFO("wm8996", 0x1a), - .platform_data = &wm8996_pdata, - .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, - }, - { I2C_BOARD_INFO("wm9081", 0x6c), - .platform_data = &wm9081_pdata, }, - { I2C_BOARD_INFO("wm8962", 0x1a), - .platform_data = &wm8962_pdata, - .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, - }, }; static void __init crag6410_map_io(void) |
