diff options
| -rw-r--r-- | arch/cris/arch-v10/kernel/entry.S | 180 | ||||
| -rw-r--r-- | arch/cris/arch-v32/kernel/entry.S | 34 | ||||
| -rw-r--r-- | arch/cris/include/asm/unistd.h | 2 | ||||
| -rw-r--r-- | arch/cris/include/uapi/asm/unistd.h | 16 |
4 files changed, 140 insertions, 92 deletions
diff --git a/arch/cris/arch-v10/kernel/entry.S b/arch/cris/arch-v10/kernel/entry.S index 897bba6..def0a53 100644 --- a/arch/cris/arch-v10/kernel/entry.S +++ b/arch/cris/arch-v10/kernel/entry.S @@ -13,8 +13,8 @@ * after a timer-interrupt and after each system call. * * Stack layout in 'ret_from_system_call': - * ptrace needs to have all regs on the stack. - * if the order here is changed, it needs to be + * ptrace needs to have all regs on the stack. + * if the order here is changed, it needs to be * updated in fork.c:copy_process, signal.c:do_signal, * ptrace.c and ptrace.h * @@ -31,7 +31,7 @@ #include <asm/pgtable.h> ;; functions exported from this file - + .globl system_call .globl ret_from_intr .globl ret_from_fork @@ -46,10 +46,10 @@ .globl do_sigtrap .globl gdb_handle_breakpoint .globl sys_call_table - + ;; below are various parts of system_call which are not in the fast-path - -#ifdef CONFIG_PREEMPT + +#ifdef CONFIG_PREEMPT ; Check if preemptive kernel scheduling should be done _resume_kernel: di @@ -74,7 +74,7 @@ _need_resched: nop #else #define _resume_kernel _Rexit -#endif +#endif ; Called at exit from fork. schedule_tail must be called to drop ; spinlock if CONFIG_PREEMPT @@ -91,16 +91,16 @@ ret_from_kernel_thread: ba ret_from_sys_call ret_from_intr: - ;; check for resched if preemptive kernel or if we're going back to user-mode + ;; check for resched if preemptive kernel or if we're going back to user-mode ;; this test matches the user_regs(regs) macro ;; we cannot simply test $dccr, because that does not necessarily ;; reflect what mode we'll return into. - + move.d [$sp + PT_dccr], $r0; regs->dccr btstq 8, $r0 ; U-flag bpl _resume_kernel - ; Note that di below is in delay slot - + ; Note that di below is in delay slot + _resume_userspace: di ; so need_resched and sigpending don't change @@ -113,7 +113,7 @@ _resume_userspace: nop ba _Rexit nop - + ;; The system_call is called by a BREAK instruction, which works like ;; an interrupt call but it stores the return PC in BRP instead of IRP. ;; Since we dont really want to have two epilogues (one for system calls @@ -123,7 +123,7 @@ _resume_userspace: ;; ;; Since we can't have system calls inside interrupts, it should not matter ;; that we don't stack IRP. - ;; + ;; ;; In r9 we have the wanted syscall number. Arguments come in r10,r11,r12,r13,mof,srp ;; ;; This function looks on the _surface_ like spaghetti programming, but it's @@ -140,7 +140,7 @@ system_call: movem $r13, [$sp] ; push r0-r13 push $r10 ; push orig_r10 clear.d [$sp=$sp-4] ; frametype == 0, normal stackframe - + movs.w -ENOSYS, $r0 move.d $r0, [$sp+PT_r10] ; put the default return value in r10 in the frame @@ -148,17 +148,17 @@ system_call: movs.w -8192, $r0 ; THREAD_SIZE == 8192 and.d $sp, $r0 - + move.d [$r0+TI_flags], $r0 btstq TIF_SYSCALL_TRACE, $r0 bmi _syscall_trace_entry - nop + nop -_syscall_traced: +_syscall_traced: ;; check for sanity in the requested syscall number - - cmpu.w NR_syscalls, $r9 + + cmpu.w NR_syscalls, $r9 bcc ret_from_sys_call lslq 2, $r9 ; multiply by 4, in the delay slot @@ -166,28 +166,28 @@ _syscall_traced: ;; of the register structure itself. some syscalls need this. push $sp - + ;; the parameter carrying registers r10, r11, r12 and 13 are intact. - ;; the fifth and sixth parameters (if any) was in mof and srp + ;; the fifth and sixth parameters (if any) was in mof and srp ;; respectively, and we need to put them on the stack. push $srp push $mof - + jsr [$r9+sys_call_table] ; actually do the system call addq 3*4, $sp ; pop the mof, srp and regs parameters move.d $r10, [$sp+PT_r10] ; save the return value moveq 1, $r9 ; "parameter" to ret_from_sys_call to show it was a sys call - + ;; fall through into ret_from_sys_call to return - + ret_from_sys_call: ;; r9 is a parameter - if >=1 we came from a syscall, if 0, from an irq - + ;; get the current task-struct pointer (see top for defs) - movs.w -8192, $r0 ; THREAD_SIZE == 8192 + movs.w -8192, $r0 ; THREAD_SIZE == 8192 and.d $sp, $r0 di ; make sure need_resched and sigpending don't change @@ -202,7 +202,7 @@ _Rexit: bne _RBFexit ; was not CRIS_FRAME_NORMAL, handle otherwise addq 4, $sp ; skip orig_r10, in delayslot movem [$sp+], $r13 ; registers r0-r13 - pop $mof ; multiply overflow register + pop $mof ; multiply overflow register pop $dccr ; condition codes pop $srp ; subroutine return pointer ;; now we have a 4-word SBFS frame which we do not want to restore @@ -216,14 +216,14 @@ _Rexit: _RBFexit: movem [$sp+], $r13 ; registers r0-r13, in delay slot - pop $mof ; multiply overflow register + pop $mof ; multiply overflow register pop $dccr ; condition codes pop $srp ; subroutine return pointer rbf [$sp+] ; return by popping the CPU status ;; We get here after doing a syscall if extra work might need to be done ;; perform syscall exit tracing if needed - + _syscall_exit_work: ;; $r0 contains current at this point and irq's are disabled @@ -231,22 +231,22 @@ _syscall_exit_work: btstq TIF_SYSCALL_TRACE, $r1 bpl _work_pending nop - + ei move.d $r9, $r1 ; preserve r9 jsr do_syscall_trace move.d $r1, $r9 - + ba _resume_userspace nop - + _work_pending: move.d [$r0+TI_flags], $r1 btstq TIF_NEED_RESCHED, $r1 bpl _work_notifysig ; was neither trace nor sched, must be signal/notify nop - + _work_resched: move.d $r9, $r1 ; preserve r9 jsr schedule @@ -268,17 +268,17 @@ _work_notifysig: move.d $sp, $r11 ; the regs param move.d $r1, $r12 ; the thread_info_flags parameter jsr do_notify_resume - + ba _Rexit nop ;; We get here as a sidetrack when we've entered a syscall with the ;; trace-bit set. We need to call do_syscall_trace and then continue ;; with the call. - + _syscall_trace_entry: ;; PT_r10 in the frame contains -ENOSYS as required, at this point - + jsr do_syscall_trace ;; now re-enter the syscall code to do the syscall itself @@ -292,10 +292,10 @@ _syscall_trace_entry: move.d [$sp+PT_r13], $r13 move [$sp+PT_mof], $mof move [$sp+PT_srp], $srp - + ba _syscall_traced nop - + ;; resume performs the actual task-switching, by switching stack pointers ;; input arguments: r10 = prev, r11 = next, r12 = thread offset in task struct ;; returns old current in r10 @@ -303,29 +303,29 @@ _syscall_trace_entry: ;; TODO: see the i386 version. The switch_to which calls resume in our version ;; could really be an inline asm of this. -resume: - push $srp ; we keep the old/new PC on the stack +resume: + push $srp ; we keep the old/new PC on the stack add.d $r12, $r10 ; r10 = current tasks tss move $dccr, [$r10+THREAD_dccr]; save irq enable state di move $usp, [$r10+ THREAD_usp] ; save user-mode stackpointer - + ;; See copy_thread for the reason why register R9 is saved. subq 10*4, $sp movem $r9, [$sp] ; save non-scratch registers and R9. - + move.d $sp, [$r10+THREAD_ksp] ; save the kernel stack pointer for the old task move.d $sp, $r10 ; return last running task in r10 and.d -8192, $r10 ; get thread_info from stackpointer - move.d [$r10+TI_task], $r10 ; get task + move.d [$r10+TI_task], $r10 ; get task add.d $r12, $r11 ; find the new tasks tss move.d [$r11+THREAD_ksp], $sp ; switch into the new stackframe by restoring kernel sp movem [$sp+], $r9 ; restore non-scratch registers and R9. move [$r11+THREAD_usp], $usp ; restore user-mode stackpointer - + move [$r11+THREAD_dccr], $dccr ; restore irq enable status jump [$sp+] ; restore PC @@ -401,7 +401,7 @@ mmu_bus_fault: push $r10 ; frametype == 1, BUSFAULT frame type move.d $sp, $r10 ; pt_regs argument to handle_mmu_bus_fault - + jsr handle_mmu_bus_fault ; in arch/cris/arch-v10/mm/fault.c ;; now we need to return through the normal path, we cannot just @@ -410,10 +410,10 @@ mmu_bus_fault: ;; whatever. moveq 0, $r9 ; busfault is equivalent to an irq - + ba ret_from_intr nop - + ;; special handlers for breakpoint and NMI hwbreakpoint: push $dccr @@ -429,7 +429,7 @@ hwbreakpoint: pop $dccr retb nop - + IRQ1_interrupt: ;; this prologue MUST match the one in irq.h and the struct in ptregs.h!!! move $brp,[$sp=$sp-16]; instruction pointer and room for a fake SBFS frame @@ -500,7 +500,7 @@ Watchdog_bite: move.d $r10, [$r11] #endif - + ;; Note that we don't do "setf m" here (or after two necessary NOPs), ;; since *not* doing that saves us from re-entrancy checks. We don't want ;; to get here again due to possible subsequent NMIs; we want the watchdog @@ -525,14 +525,14 @@ _watchdogmsg: #endif /* CONFIG_ETRAX_WATCHDOG and not CONFIG_SVINTO_SIM */ -spurious_interrupt: +spurious_interrupt: di jump hard_reset_now ;; this handles the case when multiple interrupts arrive at the same time ;; we jump to the first set interrupt bit in a priority fashion ;; the hardware will call the unserved interrupts after the handler finishes - + multiple_interrupt: ;; this prologue MUST match the one in irq.h and the struct in ptregs.h!!! move $irp,[$sp=$sp-16]; instruction pointer and room for a fake SBFS frame @@ -551,7 +551,7 @@ multiple_interrupt: jump ret_from_intr do_sigtrap: - ;; + ;; ;; SIGTRAP the process that executed the break instruction. ;; Make a frame that Rexit in entry.S expects. ;; @@ -568,30 +568,30 @@ do_sigtrap: movs.w -8192,$r9 ; THREAD_SIZE == 8192 and.d $sp, $r9 move.d [$r9+TI_task], $r10 - move.d [$r10+TASK_pid], $r10 ; current->pid as arg1. + move.d [$r10+TASK_pid], $r10 ; current->pid as arg1. moveq 5, $r11 ; SIGTRAP as arg2. - jsr sys_kill + jsr sys_kill jump ret_from_intr ; Use the return routine for interrupts. -gdb_handle_breakpoint: +gdb_handle_breakpoint: push $dccr push $r0 #ifdef CONFIG_ETRAX_KGDB - move $dccr, $r0 ; U-flag not affected by previous insns. + move $dccr, $r0 ; U-flag not affected by previous insns. btstq 8, $r0 ; Test the U-flag. - bmi _ugdb_handle_breakpoint ; Go to user mode debugging. - nop ; Empty delay slot (cannot pop r0 here). + bmi _ugdb_handle_breakpoint ; Go to user mode debugging. + nop ; Empty delay slot (cannot pop r0 here). pop $r0 ; Restore r0. - ba kgdb_handle_breakpoint ; Go to kernel debugging. + ba kgdb_handle_breakpoint ; Go to kernel debugging. pop $dccr ; Restore dccr in delay slot. #endif - -_ugdb_handle_breakpoint: + +_ugdb_handle_breakpoint: move $brp, $r0 ; Use r0 temporarily for calculation. subq 2, $r0 ; Set to address of previous instruction. move $r0, $brp - pop $r0 ; Restore r0. - ba do_sigtrap ; SIGTRAP the offending process. + pop $r0 ; Restore r0. + ba do_sigtrap ; SIGTRAP the offending process. pop $dccr ; Restore dccr in delay slot. .data @@ -602,7 +602,7 @@ hw_bp_trig_ptr: .dword hw_bp_trigs .section .rodata,"a" -sys_call_table: +sys_call_table: .long sys_restart_syscall /* 0 - old "setup()" system call, used for restarting */ .long sys_exit .long sys_fork @@ -713,7 +713,7 @@ sys_call_table: .long sys_newlstat .long sys_newfstat .long sys_ni_syscall /* old sys_uname holder */ - .long sys_ni_syscall /* sys_iopl in i386 */ + .long sys_ni_syscall /* 110 */ /* sys_iopl in i386 */ .long sys_vhangup .long sys_ni_syscall /* old "idle" system call */ .long sys_ni_syscall /* vm86old in i386 */ @@ -730,7 +730,7 @@ sys_call_table: .long sys_adjtimex .long sys_mprotect /* 125 */ .long sys_sigprocmask - .long sys_ni_syscall /* old "create_module" */ + .long sys_ni_syscall /* old "create_module" */ .long sys_init_module .long sys_delete_module .long sys_ni_syscall /* 130: old "get_kernel_syms" */ @@ -795,7 +795,7 @@ sys_call_table: .long sys_ni_syscall /* streams2 */ .long sys_vfork /* 190 */ .long sys_getrlimit - .long sys_mmap2 + .long sys_mmap2 /* mmap_pgoff */ .long sys_truncate64 .long sys_ftruncate64 .long sys_stat64 /* 195 */ @@ -861,21 +861,21 @@ sys_call_table: .long sys_epoll_ctl /* 255 */ .long sys_epoll_wait .long sys_remap_file_pages - .long sys_set_tid_address - .long sys_timer_create - .long sys_timer_settime /* 260 */ - .long sys_timer_gettime - .long sys_timer_getoverrun - .long sys_timer_delete - .long sys_clock_settime - .long sys_clock_gettime /* 265 */ - .long sys_clock_getres - .long sys_clock_nanosleep + .long sys_set_tid_address + .long sys_timer_create + .long sys_timer_settime /* 260 */ + .long sys_timer_gettime + .long sys_timer_getoverrun + .long sys_timer_delete + .long sys_clock_settime + .long sys_clock_gettime /* 265 */ + .long sys_clock_getres + .long sys_clock_nanosleep .long sys_statfs64 - .long sys_fstatfs64 - .long sys_tgkill /* 270 */ + .long sys_fstatfs64 + .long sys_tgkill /* 270 */ .long sys_utimes - .long sys_fadvise64_64 + .long sys_fadvise64_64 .long sys_ni_syscall /* sys_vserver */ .long sys_ni_syscall /* sys_mbind */ .long sys_ni_syscall /* 275 sys_get_mempolicy */ @@ -886,7 +886,7 @@ sys_call_table: .long sys_mq_timedreceive /* 280 */ .long sys_mq_notify .long sys_mq_getsetattr - .long sys_ni_syscall /* reserved for kexec */ + .long sys_ni_syscall .long sys_waitid .long sys_ni_syscall /* 285 */ /* available */ .long sys_add_key @@ -939,6 +939,22 @@ sys_call_table: .long sys_preadv .long sys_pwritev .long sys_setns /* 335 */ + .long sys_name_to_handle_at + .long sys_open_by_handle_at + .long sys_rt_tgsigqueueinfo + .long sys_perf_event_open + .long sys_recvmmsg /* 340 */ + .long sys_accept4 + .long sys_fanotify_init + .long sys_fanotify_mark + .long sys_prlimit64 + .long sys_clock_adjtime /* 345 */ + .long sys_syncfs + .long sys_sendmmsg + .long sys_process_vm_readv + .long sys_process_vm_writev + .long sys_kcmp /* 350 */ + .long sys_finit_module /* * NOTE!! This doesn't have to be exact - we just have @@ -950,4 +966,4 @@ sys_call_table: .rept NR_syscalls-(.-sys_call_table)/4 .long sys_ni_syscall .endr - + diff --git a/arch/cris/arch-v32/kernel/entry.S b/arch/cris/arch-v32/kernel/entry.S index faa6441..2f19ac6 100644 --- a/arch/cris/arch-v32/kernel/entry.S +++ b/arch/cris/arch-v32/kernel/entry.S @@ -424,7 +424,7 @@ nmi_interrupt: bpl 1f nop jsr handle_watchdog_bite ; In time.c. - move.d $sp, $r10 ; Pointer to registers + move.d $sp, $r10 ; Pointer to registers 1: btstq REG_BIT(intr_vect, r_nmi, ext), $r0 bpl 1f nop @@ -452,7 +452,7 @@ spurious_interrupt: nop ;; This handles the case when multiple interrupts arrive at the same - ;; time. Jump to the first set interrupt bit in a priotiry fashion. The + ;; time. Jump to the first set interrupt bit in a priority fashion. The ;; hardware will call the unserved interrupts after the handler ;; finishes. .type multiple_interrupt, @function @@ -885,13 +885,29 @@ sys_call_table: .long sys_preadv .long sys_pwritev .long sys_setns /* 335 */ - - /* - * NOTE!! This doesn't have to be exact - we just have - * to make sure we have _enough_ of the "sys_ni_syscall" - * entries. Don't panic if you notice that this hasn't - * been shrunk every time we add a new system call. - */ + .long sys_name_to_handle_at + .long sys_open_by_handle_at + .long sys_rt_tgsigqueueinfo + .long sys_perf_event_open + .long sys_recvmmsg /* 340 */ + .long sys_accept4 + .long sys_fanotify_init + .long sys_fanotify_mark + .long sys_prlimit64 + .long sys_clock_adjtime /* 345 */ + .long sys_syncfs + .long sys_sendmmsg + .long sys_process_vm_readv + .long sys_process_vm_writev + .long sys_kcmp /* 350 */ + .long sys_finit_module + + /* + * NOTE!! This doesn't have to be exact - we just have + * to make sure we have _enough_ of the "sys_ni_syscall" + * entries. Don't panic if you notice that this hasn't + * been shrunk every time we add a new system call. + */ .rept NR_syscalls - (.-sys_call_table) / 4 .long sys_ni_syscall diff --git a/arch/cris/include/asm/unistd.h b/arch/cris/include/asm/unistd.h index 0ff3f68..5cc7d19 100644 --- a/arch/cris/include/asm/unistd.h +++ b/arch/cris/include/asm/unistd.h @@ -4,7 +4,7 @@ #include <uapi/asm/unistd.h> -#define NR_syscalls 336 +#define NR_syscalls 360 #include <arch/unistd.h> diff --git a/arch/cris/include/uapi/asm/unistd.h b/arch/cris/include/uapi/asm/unistd.h index 4884289..f3287fa 100644 --- a/arch/cris/include/uapi/asm/unistd.h +++ b/arch/cris/include/uapi/asm/unistd.h @@ -340,5 +340,21 @@ #define __NR_preadv 333 #define __NR_pwritev 334 #define __NR_setns 335 +#define __NR_name_to_handle_at 336 +#define __NR_open_by_handle_at 337 +#define __NR_rt_tgsigqueueinfo 338 +#define __NR_perf_event_open 339 +#define __NR_recvmmsg 340 +#define __NR_accept4 341 +#define __NR_fanotify_init 342 +#define __NR_fanotify_mark 343 +#define __NR_prlimit64 344 +#define __NR_clock_adjtime 345 +#define __NR_syncfs 346 +#define __NR_sendmmsg 347 +#define __NR_process_vm_readv 348 +#define __NR_process_vm_writev 349 +#define __NR_kcmp 350 +#define __NR_finit_module 351 #endif /* _UAPI_ASM_CRIS_UNISTD_H_ */ |
