summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/arm/README7
-rw-r--r--MAINTAINERS5
-rw-r--r--arch/arm/kernel/entry-armv.S15
-rw-r--r--arch/arm/kernel/setup.c10
-rw-r--r--arch/arm/mach-ixp2000/uengine.c11
-rw-r--r--arch/arm/mach-ixp4xx/common-pci.c2
-rw-r--r--arch/arm/mach-pxa/Kconfig9
-rw-r--r--arch/arm/mach-pxa/Makefile1
-rw-r--r--arch/arm/mach-pxa/pm.c16
-rw-r--r--arch/arm/mach-pxa/tosa.c162
-rw-r--r--include/asm-arm/arch-iop3xx/iop331.h2
-rw-r--r--include/asm-arm/arch-pxa/pm.h12
-rw-r--r--include/asm-arm/arch-pxa/tosa.h166
-rw-r--r--include/asm-arm/mmu_context.h1
14 files changed, 391 insertions, 28 deletions
diff --git a/Documentation/arm/README b/Documentation/arm/README
index a6f718e..5ed6f35 100644
--- a/Documentation/arm/README
+++ b/Documentation/arm/README
@@ -8,10 +8,9 @@ Compilation of kernel
---------------------
In order to compile ARM Linux, you will need a compiler capable of
- generating ARM ELF code with GNU extensions. GCC 2.95.1, EGCS
- 1.1.2, and GCC 3.3 are known to be good compilers. Fortunately, you
- needn't guess. The kernel will report an error if your compiler is
- a recognized offender.
+ generating ARM ELF code with GNU extensions. GCC 3.3 is known to be
+ a good compiler. Fortunately, you needn't guess. The kernel will report
+ an error if your compiler is a recognized offender.
To build ARM Linux natively, you shouldn't have to alter the ARCH = line
in the top level Makefile. However, if you don't have the ARM Linux ELF
diff --git a/MAINTAINERS b/MAINTAINERS
index f08a143..d57c491 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -297,6 +297,11 @@ P: Richard Purdie
M: rpurdie@rpsys.net
S: Maintained
+ARM/TOSA MACHINE SUPPORT
+P: Dirk Opfer
+M: dirk@opfer-online.de
+S: Maintained
+
ARM/PLEB SUPPORT
P: Peter Chubb
M: pleb@gelato.unsw.edu.au
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index be439ca..a511ec5 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -785,7 +785,7 @@ __kuser_helper_end:
* SP points to a minimal amount of processor-private memory, the address
* of which is copied into r0 for the mode specific abort handler.
*/
- .macro vector_stub, name, correction=0
+ .macro vector_stub, name, mode, correction=0
.align 5
vector_\name:
@@ -805,15 +805,14 @@ vector_\name:
@ Prepare for SVC32 mode. IRQs remain disabled.
@
mrs r0, cpsr
- bic r0, r0, #MODE_MASK
- orr r0, r0, #SVC_MODE
+ eor r0, r0, #(\mode ^ SVC_MODE)
msr spsr_cxsf, r0
@
@ the branch table must immediately follow this code
@
- mov r0, sp
and lr, lr, #0x0f
+ mov r0, sp
ldr lr, [pc, lr, lsl #2]
movs pc, lr @ branch to handler in SVC mode
.endm
@@ -823,7 +822,7 @@ __stubs_start:
/*
* Interrupt dispatcher
*/
- vector_stub irq, 4
+ vector_stub irq, IRQ_MODE, 4
.long __irq_usr @ 0 (USR_26 / USR_32)
.long __irq_invalid @ 1 (FIQ_26 / FIQ_32)
@@ -846,7 +845,7 @@ __stubs_start:
* Data abort dispatcher
* Enter in ABT mode, spsr = USR CPSR, lr = USR PC
*/
- vector_stub dabt, 8
+ vector_stub dabt, ABT_MODE, 8
.long __dabt_usr @ 0 (USR_26 / USR_32)
.long __dabt_invalid @ 1 (FIQ_26 / FIQ_32)
@@ -869,7 +868,7 @@ __stubs_start:
* Prefetch abort dispatcher
* Enter in ABT mode, spsr = USR CPSR, lr = USR PC
*/
- vector_stub pabt, 4
+ vector_stub pabt, ABT_MODE, 4
.long __pabt_usr @ 0 (USR_26 / USR_32)
.long __pabt_invalid @ 1 (FIQ_26 / FIQ_32)
@@ -892,7 +891,7 @@ __stubs_start:
* Undef instr entry dispatcher
* Enter in UND mode, spsr = SVC/USR CPSR, lr = SVC/USR PC
*/
- vector_stub und
+ vector_stub und, UND_MODE
.long __und_usr @ 0 (USR_26 / USR_32)
.long __und_invalid @ 1 (FIQ_26 / FIQ_32)
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index c9b6977..8577416 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -338,7 +338,8 @@ void cpu_init(void)
BUG();
}
- dump_cpu_info(cpu);
+ if (system_state == SYSTEM_BOOTING)
+ dump_cpu_info(cpu);
/*
* setup stacks for re-entrant exception handlers
@@ -838,7 +839,12 @@ static int c_show(struct seq_file *m, void *v)
#if defined(CONFIG_SMP)
for_each_online_cpu(i) {
- seq_printf(m, "Processor\t: %d\n", i);
+ /*
+ * glibc reads /proc/cpuinfo to determine the number of
+ * online processors, looking for lines beginning with
+ * "processor". Give glibc what it expects.
+ */
+ seq_printf(m, "processor\t: %d\n", i);
seq_printf(m, "BogoMIPS\t: %lu.%02lu\n\n",
per_cpu(cpu_data, i).loops_per_jiffy / (500000UL/HZ),
(per_cpu(cpu_data, i).loops_per_jiffy / (5000UL/HZ)) % 100);
diff --git a/arch/arm/mach-ixp2000/uengine.c b/arch/arm/mach-ixp2000/uengine.c
index 43e2343..ec4e007 100644
--- a/arch/arm/mach-ixp2000/uengine.c
+++ b/arch/arm/mach-ixp2000/uengine.c
@@ -91,8 +91,8 @@ EXPORT_SYMBOL(ixp2000_uengine_csr_write);
void ixp2000_uengine_reset(u32 uengine_mask)
{
- ixp2000_reg_write(IXP2000_RESET1, uengine_mask & ixp2000_uengine_mask);
- ixp2000_reg_write(IXP2000_RESET1, 0);
+ ixp2000_reg_wrb(IXP2000_RESET1, uengine_mask & ixp2000_uengine_mask);
+ ixp2000_reg_wrb(IXP2000_RESET1, 0);
}
EXPORT_SYMBOL(ixp2000_uengine_reset);
@@ -452,21 +452,20 @@ static int __init ixp2000_uengine_init(void)
/*
* Reset microengines.
*/
- ixp2000_reg_write(IXP2000_RESET1, ixp2000_uengine_mask);
- ixp2000_reg_write(IXP2000_RESET1, 0);
+ ixp2000_uengine_reset(ixp2000_uengine_mask);
/*
* Synchronise timestamp counters across all microengines.
*/
value = ixp2000_reg_read(IXP2000_MISC_CONTROL);
- ixp2000_reg_write(IXP2000_MISC_CONTROL, value & ~0x80);
+ ixp2000_reg_wrb(IXP2000_MISC_CONTROL, value & ~0x80);
for (uengine = 0; uengine < 32; uengine++) {
if (ixp2000_uengine_mask & (1 << uengine)) {
ixp2000_uengine_csr_write(uengine, TIMESTAMP_LOW, 0);
ixp2000_uengine_csr_write(uengine, TIMESTAMP_HIGH, 0);
}
}
- ixp2000_reg_write(IXP2000_MISC_CONTROL, value | 0x80);
+ ixp2000_reg_wrb(IXP2000_MISC_CONTROL, value | 0x80);
return 0;
}
diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c
index 2b54436..9795da2 100644
--- a/arch/arm/mach-ixp4xx/common-pci.c
+++ b/arch/arm/mach-ixp4xx/common-pci.c
@@ -427,7 +427,7 @@ void __init ixp4xx_pci_preinit(void)
#ifdef __ARMEB__
*PCI_CSR = PCI_CSR_IC | PCI_CSR_ABE | PCI_CSR_PDS | PCI_CSR_ADS;
#else
- *PCI_CSR = PCI_CSR_IC;
+ *PCI_CSR = PCI_CSR_IC | PCI_CSR_ABE;
#endif
pr_debug("DONE\n");
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 3e5f69b..b380a438 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -27,7 +27,8 @@ config PXA_SHARPSL
Say Y here if you intend to run this kernel on a
Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi),
SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita),
- SL-C3000 (Spitz) or SL-C3100 (Borzoi) handheld computer.
+ SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
+ handheld computer.
endchoice
@@ -37,7 +38,7 @@ choice
prompt "Select target Sharp Zaurus device range"
config PXA_SHARPSL_25x
- bool "Sharp PXA25x models (SL-5600 and SL-C7xx)"
+ bool "Sharp PXA25x models (SL-5600, SL-C7xx and SL-C6000x)"
select PXA25x
config PXA_SHARPSL_27x
@@ -80,6 +81,10 @@ config MACH_BORZOI
depends PXA_SHARPSL_27x
select PXA_SHARP_Cxx00
+config MACH_TOSA
+ bool "Enable Sharp SL-6000x (Tosa) Support"
+ depends PXA_SHARPSL
+
config PXA25x
bool
help
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index f609a0f..8bc72d0 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_ARCH_PXA_IDP) += idp.o
obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o corgi_lcd.o ssp.o
obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o corgi_ssp.o corgi_lcd.o ssp.o
obj-$(CONFIG_MACH_POODLE) += poodle.o
+obj-$(CONFIG_MACH_TOSA) += tosa.o
# Support for blinky lights
led-y := leds.o
diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
index ac4dd43..f74b9af 100644
--- a/arch/arm/mach-pxa/pm.c
+++ b/arch/arm/mach-pxa/pm.c
@@ -12,6 +12,7 @@
*/
#include <linux/config.h>
#include <linux/init.h>
+#include <linux/module.h>
#include <linux/suspend.h>
#include <linux/errno.h>
#include <linux/time.h>
@@ -19,6 +20,7 @@
#include <asm/hardware.h>
#include <asm/memory.h>
#include <asm/system.h>
+#include <asm/arch/pm.h>
#include <asm/arch/pxa-regs.h>
#include <asm/arch/lubbock.h>
#include <asm/mach/time.h>
@@ -72,7 +74,7 @@ enum { SLEEP_SAVE_START = 0,
};
-static int pxa_pm_enter(suspend_state_t state)
+int pxa_pm_enter(suspend_state_t state)
{
unsigned long sleep_save[SLEEP_SAVE_SIZE];
unsigned long checksum = 0;
@@ -191,6 +193,8 @@ static int pxa_pm_enter(suspend_state_t state)
return 0;
}
+EXPORT_SYMBOL_GPL(pxa_pm_enter);
+
unsigned long sleep_phys_sp(void *sp)
{
return virt_to_phys(sp);
@@ -199,21 +203,25 @@ unsigned long sleep_phys_sp(void *sp)
/*
* Called after processes are frozen, but before we shut down devices.
*/
-static int pxa_pm_prepare(suspend_state_t state)
+int pxa_pm_prepare(suspend_state_t state)
{
extern int pxa_cpu_pm_prepare(suspend_state_t state);
return pxa_cpu_pm_prepare(state);
}
+EXPORT_SYMBOL_GPL(pxa_pm_prepare);
+
/*
* Called after devices are re-setup, but before processes are thawed.
*/
-static int pxa_pm_finish(suspend_state_t state)
+int pxa_pm_finish(suspend_state_t state)
{
return 0;
}
+EXPORT_SYMBOL_GPL(pxa_pm_finish);
+
/*
* Set to PM_DISK_FIRMWARE so we can quickly veto suspend-to-disk.
*/
@@ -230,4 +238,4 @@ static int __init pxa_pm_init(void)
return 0;
}
-late_initcall(pxa_pm_init);
+device_initcall(pxa_pm_init);
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
new file mode 100644
index 0000000..400609f
--- /dev/null
+++ b/arch/arm/mach-pxa/tosa.c
@@ -0,0 +1,162 @@
+/*
+ * Support for Sharp SL-C6000x PDAs
+ * Model: (Tosa)
+ *
+ * Copyright (c) 2005 Dirk Opfer
+ *
+ * Based on code written by Sharp/Lineo for 2.4 kernels
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/major.h>
+#include <linux/fs.h>
+#include <linux/interrupt.h>
+#include <linux/mmc/host.h>
+
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/arch/irda.h>
+#include <asm/arch/mmc.h>
+#include <asm/arch/udc.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/irq.h>
+#include <asm/arch/tosa.h>
+
+#include <asm/hardware/scoop.h>
+#include <asm/mach/sharpsl_param.h>
+
+#include "generic.h"
+
+
+/*
+ * SCOOP Device
+ */
+static struct resource tosa_scoop_resources[] = {
+ [0] = {
+ .start = TOSA_CF_PHYS,
+ .end = TOSA_CF_PHYS + 0xfff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct scoop_config tosa_scoop_setup = {
+ .io_dir = TOSA_SCOOP_IO_DIR,
+ .io_out = TOSA_SCOOP_IO_OUT,
+
+};
+
+struct platform_device tosascoop_device = {
+ .name = "sharp-scoop",
+ .id = 0,
+ .dev = {
+ .platform_data = &tosa_scoop_setup,
+ },
+ .num_resources = ARRAY_SIZE(tosa_scoop_resources),
+ .resource = tosa_scoop_resources,
+};
+
+
+/*
+ * SCOOP Device Jacket
+ */
+static struct resource tosa_scoop_jc_resources[] = {
+ [0] = {
+ .start = TOSA_SCOOP_PHYS + 0x40,
+ .end = TOSA_SCOOP_PHYS + 0xfff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct scoop_config tosa_scoop_jc_setup = {
+ .io_dir = TOSA_SCOOP_JC_IO_DIR,
+ .io_out = TOSA_SCOOP_JC_IO_OUT,
+};
+
+struct platform_device tosascoop_jc_device = {
+ .name = "sharp-scoop",
+ .id = 1,
+ .dev = {
+ .platform_data = &tosa_scoop_jc_setup,
+ .parent = &tosascoop_device.dev,
+ },
+ .num_resources = ARRAY_SIZE(tosa_scoop_jc_resources),
+ .resource = tosa_scoop_jc_resources,
+};
+
+static struct scoop_pcmcia_dev tosa_pcmcia_scoop[] = {
+{
+ .dev = &tosascoop_device.dev,
+ .irq = TOSA_IRQ_GPIO_CF_IRQ,
+ .cd_irq = TOSA_IRQ_GPIO_CF_CD,
+ .cd_irq_str = "PCMCIA0 CD",
+},{
+ .dev = &tosascoop_jc_device.dev,
+ .irq = TOSA_IRQ_GPIO_JC_CF_IRQ,
+ .cd_irq = -1,
+},
+};
+
+
+static struct platform_device *devices[] __initdata = {
+ &tosascoop_device,
+ &tosascoop_jc_device,
+};
+
+static void __init tosa_init(void)
+{
+ pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_IN);
+ pxa_gpio_mode(TOSA_GPIO_TC6393_INT | GPIO_IN);
+
+ /* setup sleep mode values */
+ PWER = 0x00000002;
+ PFER = 0x00000000;
+ PRER = 0x00000002;
+ PGSR0 = 0x00000000;
+ PGSR1 = 0x00FF0002;
+ PGSR2 = 0x00014000;
+ PCFR |= PCFR_OPDE;
+
+ // enable batt_fault
+ PMCR = 0x01;
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+
+ scoop_num = 2;
+ scoop_devs = &tosa_pcmcia_scoop[0];
+}
+
+static void __init fixup_tosa(struct machine_desc *desc,
+ struct tag *tags, char **cmdline, struct meminfo *mi)
+{
+ sharpsl_save_param();
+ mi->nr_banks=1;
+ mi->bank[0].start = 0xa0000000;
+ mi->bank[0].node = 0;
+ mi->bank[0].size = (64*1024*1024);
+}
+
+MACHINE_START(TOSA, "SHARP Tosa")
+ .phys_ram = 0xa0000000,
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .fixup = fixup_tosa,
+ .map_io = pxa_map_io,
+ .init_irq = pxa_init_irq,
+ .init_machine = tosa_init,
+ .timer = &pxa_timer,
+MACHINE_END
diff --git a/include/asm-arm/arch-iop3xx/iop331.h b/include/asm-arm/arch-iop3xx/iop331.h
index 96adffd..fbf0cc1 100644
--- a/include/asm-arm/arch-iop3xx/iop331.h
+++ b/include/asm-arm/arch-iop3xx/iop331.h
@@ -42,7 +42,7 @@
/* this can be 128M if OMWTVR1 is set */
#define IOP331_PCI_MEM_WINDOW_SIZE 0x04000000 /* 64M outbound window */
-//#define IOP331_PCI_MEM_WINDOW_SIZE (~*IOP331_IALR1 + 1)
+/* #define IOP331_PCI_MEM_WINDOW_SIZE (~*IOP331_IALR1 + 1) */
#define IOP331_PCI_LOWER_MEM_PA 0x80000000
#define IOP331_PCI_LOWER_MEM_BA (*IOP331_OMWTVR0)
#define IOP331_PCI_UPPER_MEM_PA (IOP331_PCI_LOWER_MEM_PA + IOP331_PCI_MEM_WINDOW_SIZE - 1)
diff --git a/include/asm-arm/arch-pxa/pm.h b/include/asm-arm/arch-pxa/pm.h
new file mode 100644
index 0000000..7a8a1cd
--- /dev/null
+++ b/include/asm-arm/arch-pxa/pm.h
@@ -0,0 +1,12 @@
+/*
+ * Copyright (c) 2005 Richard Purdie
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+extern int pxa_pm_prepare(suspend_state_t state);
+extern int pxa_pm_enter(suspend_state_t state);
+extern int pxa_pm_finish(suspend_state_t state);
diff --git a/include/asm-arm/arch-pxa/tosa.h b/include/asm-arm/arch-pxa/tosa.h
new file mode 100644
index 0000000..c3364a2
--- /dev/null
+++ b/include/asm-arm/arch-pxa/tosa.h
@@ -0,0 +1,166 @@
+/*
+ * Hardware specific definitions for Sharp SL-C6000x series of PDAs
+ *
+ * Copyright (c) 2005 Dirk Opfer
+ *
+ * Based on Sharp's 2.4 kernel patches
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef _ASM_ARCH_TOSA_H_
+#define _ASM_ARCH_TOSA_H_ 1
+
+/* TOSA Chip selects */
+#define TOSA_LCDC_PHYS PXA_CS4_PHYS
+/* Internel Scoop */
+#define TOSA_CF_PHYS (PXA_CS2_PHYS + 0x00800000)
+/* Jacket Scoop */
+#define TOSA_SCOOP_PHYS (PXA_CS5_PHYS + 0x00800000)
+
+/*
+ * SCOOP2 internal GPIOs
+ */
+#define TOSA_SCOOP_PXA_VCORE1 SCOOP_GPCR_PA11
+#define TOSA_SCOOP_TC6393_REST_IN SCOOP_GPCR_PA12
+#define TOSA_SCOOP_IR_POWERDWN SCOOP_GPCR_PA13
+#define TOSA_SCOOP_SD_WP SCOOP_GPCR_PA14
+#define TOSA_SCOOP_PWR_ON SCOOP_GPCR_PA15
+#define TOSA_SCOOP_AUD_PWR_ON SCOOP_GPCR_PA16
+#define TOSA_SCOOP_BT_RESET SCOOP_GPCR_PA17
+#define TOSA_SCOOP_BT_PWR_EN SCOOP_GPCR_PA18
+#define TOSA_SCOOP_AC_IN_OL SCOOP_GPCR_PA19
+
+/* GPIO Direction 1 : output mode / 0:input mode */
+#define TOSA_SCOOP_IO_DIR ( TOSA_SCOOP_PXA_VCORE1 | TOSA_SCOOP_TC6393_REST_IN | \
+ TOSA_SCOOP_IR_POWERDWN | TOSA_SCOOP_PWR_ON | TOSA_SCOOP_AUD_PWR_ON |\
+ TOSA_SCOOP_BT_RESET | TOSA_SCOOP_BT_PWR_EN )
+/* GPIO out put level when init 1: Hi */
+#define TOSA_SCOOP_IO_OUT ( TOSA_SCOOP_TC6393_REST_IN )
+
+/*
+ * SCOOP2 jacket GPIOs
+ */
+#define TOSA_SCOOP_JC_BT_LED SCOOP_GPCR_PA11
+#define TOSA_SCOOP_JC_NOTE_LED SCOOP_GPCR_PA12
+#define TOSA_SCOOP_JC_CHRG_ERR_LED SCOOP_GPCR_PA13
+#define TOSA_SCOOP_JC_USB_PULLUP SCOOP_GPCR_PA14
+#define TOSA_SCOOP_JC_TC6393_SUSPEND SCOOP_GPCR_PA15
+#define TOSA_SCOOP_JC_TC3693_L3V_ON SCOOP_GPCR_PA16
+#define TOSA_SCOOP_JC_WLAN_DETECT SCOOP_GPCR_PA17
+#define TOSA_SCOOP_JC_WLAN_LED SCOOP_GPCR_PA18
+#define TOSA_SCOOP_JC_CARD_LIMIT_SEL SCOOP_GPCR_PA19
+
+/* GPIO Direction 1 : output mode / 0:input mode */
+#define TOSA_SCOOP_JC_IO_DIR ( TOSA_SCOOP_JC_BT_LED | TOSA_SCOOP_JC_NOTE_LED | \
+ TOSA_SCOOP_JC_CHRG_ERR_LED | TOSA_SCOOP_JC_USB_PULLUP | \
+ TOSA_SCOOP_JC_TC6393_SUSPEND | TOSA_SCOOP_JC_TC3693_L3V_ON | \
+ TOSA_SCOOP_JC_WLAN_LED | TOSA_SCOOP_JC_CARD_LIMIT_SEL )
+/* GPIO out put level when init 1: Hi */
+#define TOSA_SCOOP_JC_IO_OUT ( 0 )
+
+/*
+ * Timing Generator
+ */
+#define TG_PNLCTL 0x00
+#define TG_TPOSCTL 0x01
+#define TG_DUTYCTL 0x02
+#define TG_GPOSR 0x03
+#define TG_GPODR1 0x04
+#define TG_GPODR2 0x05
+#define TG_PINICTL 0x06
+#define TG_HPOSCTL 0x07
+
+/*
+ * LED
+ */
+#define TOSA_SCOOP_LED_BLUE TOSA_SCOOP_GPCR_PA11
+#define TOSA_SCOOP_LED_GREEN TOSA_SCOOP_GPCR_PA12
+#define TOSA_SCOOP_LED_ORANGE TOSA_SCOOP_GPCR_PA13
+#define TOSA_SCOOP_LED_WLAN TOSA_SCOOP_GPCR_PA18
+
+
+/*
+ * PXA GPIOs
+ */
+#define TOSA_GPIO_POWERON (0)
+#define TOSA_GPIO_RESET (1)
+#define TOSA_GPIO_AC_IN (2)
+#define TOSA_GPIO_RECORD_BTN (3)
+#define TOSA_GPIO_SYNC (4) /* Cradle SYNC Button */
+#define TOSA_GPIO_USB_IN (5)
+#define TOSA_GPIO_JACKET_DETECT (7)
+#define TOSA_GPIO_nSD_DETECT (9)
+#define TOSA_GPIO_nSD_INT (10)
+#define TOSA_GPIO_TC6393_CLK (11)
+#define TOSA_GPIO_BAT1_CRG (12)
+#define TOSA_GPIO_CF_CD (13)
+#define TOSA_GPIO_BAT0_CRG (14)
+#define TOSA_GPIO_TC6393_INT (15)
+#define TOSA_GPIO_BAT0_LOW (17)
+#define TOSA_GPIO_TC6393_RDY (18)
+#define TOSA_GPIO_ON_RESET (19)
+#define TOSA_GPIO_EAR_IN (20)
+#define TOSA_GPIO_CF_IRQ (21) /* CF slot0 Ready */
+#define TOSA_GPIO_ON_KEY (22)
+#define TOSA_GPIO_VGA_LINE (27)
+#define TOSA_GPIO_TP_INT (32) /* Touch Panel pen down interrupt */
+#define TOSA_GPIO_JC_CF_IRQ (36) /* CF slot1 Ready */
+#define TOSA_GPIO_BAT_LOCKED (38) /* Battery locked */
+#define TOSA_GPIO_TG_SPI_SCLK (81)
+#define TOSA_GPIO_TG_SPI_CS (82)
+#define TOSA_GPIO_TG_SPI_MOSI (83)
+#define TOSA_GPIO_BAT1_LOW (84)
+
+#define TOSA_GPIO_HP_IN GPIO_EAR_IN
+
+#define TOSA_GPIO_MAIN_BAT_LOW GPIO_BAT0_LOW
+
+#define TOSA_KEY_STROBE_NUM (11)
+#define TOSA_KEY_SENSE_NUM (7)
+
+#define TOSA_GPIO_HIGH_STROBE_BIT (0xfc000000)
+#define TOSA_GPIO_LOW_STROBE_BIT (0x0000001f)
+#define TOSA_GPIO_ALL_SENSE_BIT (0x00000fe0)
+#define TOSA_GPIO_ALL_SENSE_RSHIFT (5)
+#define TOSA_GPIO_STROBE_BIT(a) GPIO_bit(58+(a))
+#define TOSA_GPIO_SENSE_BIT(a) GPIO_bit(69+(a))
+#define TOSA_GAFR_HIGH_STROBE_BIT (0xfff00000)
+#define TOSA_GAFR_LOW_STROBE_BIT (0x000003ff)
+#define TOSA_GAFR_ALL_SENSE_BIT (0x00fffc00)
+#define TOSA_GPIO_KEY_SENSE(a) (69+(a))
+#define TOSA_GPIO_KEY_STROBE(a) (58+(a))
+
+/*
+ * Interrupts
+ */
+#define TOSA_IRQ_GPIO_WAKEUP IRQ_GPIO(TOSA_GPIO_WAKEUP)
+#define TOSA_IRQ_GPIO_AC_IN IRQ_GPIO(TOSA_GPIO_AC_IN)
+#define TOSA_IRQ_GPIO_RECORD_BTN IRQ_GPIO(TOSA_GPIO_RECORD_BTN)
+#define TOSA_IRQ_GPIO_SYNC IRQ_GPIO(TOSA_GPIO_SYNC)
+#define TOSA_IRQ_GPIO_USB_IN IRQ_GPIO(TOSA_GPIO_USB_IN)
+#define TOSA_IRQ_GPIO_JACKET_DETECT IRQ_GPIO(TOSA_GPIO_JACKET_DETECT)
+#define TOSA_IRQ_GPIO_nSD_INT IRQ_GPIO(TOSA_GPIO_nSD_INT)
+#define TOSA_IRQ_GPIO_nSD_DETECT IRQ_GPIO(TOSA_GPIO_nSD_DETECT)
+#define TOSA_IRQ_GPIO_BAT1_CRG IRQ_GPIO(TOSA_GPIO_BAT1_CRG)
+#define TOSA_IRQ_GPIO_CF_CD IRQ_GPIO(TOSA_GPIO_CF_CD)
+#define TOSA_IRQ_GPIO_BAT0_CRG IRQ_GPIO(TOSA_GPIO_BAT0_CRG)
+#define TOSA_IRQ_GPIO_TC6393_INT IRQ_GPIO(TOSA_GPIO_TC6393_INT)
+#define TOSA_IRQ_GPIO_BAT0_LOW IRQ_GPIO(TOSA_GPIO_BAT0_LOW)
+#define TOSA_IRQ_GPIO_EAR_IN IRQ_GPIO(TOSA_GPIO_EAR_IN)
+#define TOSA_IRQ_GPIO_CF_IRQ IRQ_GPIO(TOSA_GPIO_CF_IRQ)
+#define TOSA_IRQ_GPIO_ON_KEY IRQ_GPIO(TOSA_GPIO_ON_KEY)
+#define TOSA_IRQ_GPIO_VGA_LINE IRQ_GPIO(TOSA_GPIO_VGA_LINE)
+#define TOSA_IRQ_GPIO_TP_INT IRQ_GPIO(TOSA_GPIO_TP_INT)
+#define TOSA_IRQ_GPIO_JC_CF_IRQ IRQ_GPIO(TOSA_GPIO_JC_CF_IRQ)
+#define TOSA_IRQ_GPIO_BAT_LOCKED IRQ_GPIO(TOSA_GPIO_BAT_LOCKED)
+#define TOSA_IRQ_GPIO_BAT1_LOW IRQ_GPIO(TOSA_GPIO_BAT1_LOW)
+#define TOSA_IRQ_GPIO_KEY_SENSE(a) IRQ_GPIO(69+(a))
+
+#define TOSA_IRQ_GPIO_MAIN_BAT_LOW IRQ_GPIO(TOSA_GPIO_MAIN_BAT_LOW)
+
+extern struct platform_device tosascoop_jc_device;
+extern struct platform_device tosascoop_device;
+#endif /* _ASM_ARCH_TOSA_H_ */
diff --git a/include/asm-arm/mmu_context.h b/include/asm-arm/mmu_context.h
index 57b8def..3d4b810 100644
--- a/include/asm-arm/mmu_context.h
+++ b/include/asm-arm/mmu_context.h
@@ -13,6 +13,7 @@
#ifndef __ASM_ARM_MMU_CONTEXT_H
#define __ASM_ARM_MMU_CONTEXT_H
+#include <asm/cacheflush.h>
#include <asm/proc-fns.h>
#if __LINUX_ARM_ARCH__ >= 6
OpenPOWER on IntegriCloud