summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--arch/x86/kernel/acpi/cstate.c4
-rw-r--r--drivers/cpuidle/sysfs.c3
-rw-r--r--drivers/idle/intel_idle.c204
-rw-r--r--tools/power/x86/turbostat/turbostat.8127
-rw-r--r--tools/power/x86/turbostat/turbostat.c240
5 files changed, 365 insertions, 213 deletions
diff --git a/arch/x86/kernel/acpi/cstate.c b/arch/x86/kernel/acpi/cstate.c
index e69182f..4b28159 100644
--- a/arch/x86/kernel/acpi/cstate.c
+++ b/arch/x86/kernel/acpi/cstate.c
@@ -87,7 +87,9 @@ static long acpi_processor_ffh_cstate_probe_cpu(void *_cx)
num_cstate_subtype = edx_part & MWAIT_SUBSTATE_MASK;
retval = 0;
- if (num_cstate_subtype < (cx->address & MWAIT_SUBSTATE_MASK)) {
+ /* If the HW does not support any sub-states in this C-state */
+ if (num_cstate_subtype == 0) {
+ pr_warn(FW_BUG "ACPI MWAIT C-state 0x%x not supported by HW (0x%x)\n", cx->address, edx_part);
retval = -1;
goto out;
}
diff --git a/drivers/cpuidle/sysfs.c b/drivers/cpuidle/sysfs.c
index e918b6d..efe2f17 100644
--- a/drivers/cpuidle/sysfs.c
+++ b/drivers/cpuidle/sysfs.c
@@ -293,6 +293,7 @@ static ssize_t show_state_##_name(struct cpuidle_state *state, \
}
define_show_state_function(exit_latency)
+define_show_state_function(target_residency)
define_show_state_function(power_usage)
define_show_state_ull_function(usage)
define_show_state_ull_function(time)
@@ -304,6 +305,7 @@ define_store_state_ull_function(disable)
define_one_state_ro(name, show_state_name);
define_one_state_ro(desc, show_state_desc);
define_one_state_ro(latency, show_state_exit_latency);
+define_one_state_ro(residency, show_state_target_residency);
define_one_state_ro(power, show_state_power_usage);
define_one_state_ro(usage, show_state_usage);
define_one_state_ro(time, show_state_time);
@@ -313,6 +315,7 @@ static struct attribute *cpuidle_state_default_attrs[] = {
&attr_name.attr,
&attr_desc.attr,
&attr_latency.attr,
+ &attr_residency.attr,
&attr_power.attr,
&attr_usage.attr,
&attr_time.attr,
diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c
index 51493ed..a43220c 100644
--- a/drivers/idle/intel_idle.c
+++ b/drivers/idle/intel_idle.c
@@ -196,6 +196,53 @@ static struct cpuidle_state snb_cstates[] = {
.enter = NULL }
};
+static struct cpuidle_state byt_cstates[] = {
+ {
+ .name = "C1-BYT",
+ .desc = "MWAIT 0x00",
+ .flags = MWAIT2flg(0x00) | CPUIDLE_FLAG_TIME_VALID,
+ .exit_latency = 1,
+ .target_residency = 1,
+ .enter = &intel_idle },
+ {
+ .name = "C1E-BYT",
+ .desc = "MWAIT 0x01",
+ .flags = MWAIT2flg(0x01) | CPUIDLE_FLAG_TIME_VALID,
+ .exit_latency = 15,
+ .target_residency = 30,
+ .enter = &intel_idle },
+ {
+ .name = "C6N-BYT",
+ .desc = "MWAIT 0x58",
+ .flags = MWAIT2flg(0x58) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .exit_latency = 40,
+ .target_residency = 275,
+ .enter = &intel_idle },
+ {
+ .name = "C6S-BYT",
+ .desc = "MWAIT 0x52",
+ .flags = MWAIT2flg(0x52) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .exit_latency = 140,
+ .target_residency = 560,
+ .enter = &intel_idle },
+ {
+ .name = "C7-BYT",
+ .desc = "MWAIT 0x60",
+ .flags = MWAIT2flg(0x60) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .exit_latency = 1200,
+ .target_residency = 1500,
+ .enter = &intel_idle },
+ {
+ .name = "C7S-BYT",
+ .desc = "MWAIT 0x64",
+ .flags = MWAIT2flg(0x64) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .exit_latency = 10000,
+ .target_residency = 20000,
+ .enter = &intel_idle },
+ {
+ .enter = NULL }
+};
+
static struct cpuidle_state ivb_cstates[] = {
{
.name = "C1-IVB",
@@ -236,6 +283,105 @@ static struct cpuidle_state ivb_cstates[] = {
.enter = NULL }
};
+static struct cpuidle_state ivt_cstates[] = {
+ {
+ .name = "C1-IVT",
+ .desc = "MWAIT 0x00",
+ .flags = MWAIT2flg(0x00) | CPUIDLE_FLAG_TIME_VALID,
+ .exit_latency = 1,
+ .target_residency = 1,
+ .enter = &intel_idle },
+ {
+ .name = "C1E-IVT",
+ .desc = "MWAIT 0x01",
+ .flags = MWAIT2flg(0x01) | CPUIDLE_FLAG_TIME_VALID,
+ .exit_latency = 10,
+ .target_residency = 80,
+ .enter = &intel_idle },
+ {
+ .name = "C3-IVT",
+ .desc = "MWAIT 0x10",
+ .flags = MWAIT2flg(0x10) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .exit_latency = 59,
+ .target_residency = 156,
+ .enter = &intel_idle },
+ {
+ .name = "C6-IVT",
+ .desc = "MWAIT 0x20",
+ .flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .exit_latency = 82,
+ .target_residency = 300,
+ .enter = &intel_idle },
+ {
+ .enter = NULL }
+};
+
+static struct cpuidle_state ivt_cstates_4s[] = {
+ {
+ .name = "C1-IVT-4S",
+ .desc = "MWAIT 0x00",
+ .flags = MWAIT2flg(0x00) | CPUIDLE_FLAG_TIME_VALID,
+ .exit_latency = 1,
+ .target_residency = 1,
+ .enter = &intel_idle },
+ {
+ .name = "C1E-IVT-4S",
+ .desc = "MWAIT 0x01",
+ .flags = MWAIT2flg(0x01) | CPUIDLE_FLAG_TIME_VALID,
+ .exit_latency = 10,
+ .target_residency = 250,
+ .enter = &intel_idle },
+ {
+ .name = "C3-IVT-4S",
+ .desc = "MWAIT 0x10",
+ .flags = MWAIT2flg(0x10) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .exit_latency = 59,
+ .target_residency = 300,
+ .enter = &intel_idle },
+ {
+ .name = "C6-IVT-4S",
+ .desc = "MWAIT 0x20",
+ .flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .exit_latency = 84,
+ .target_residency = 400,
+ .enter = &intel_idle },
+ {
+ .enter = NULL }
+};
+
+static struct cpuidle_state ivt_cstates_8s[] = {
+ {
+ .name = "C1-IVT-8S",
+ .desc = "MWAIT 0x00",
+ .flags = MWAIT2flg(0x00) | CPUIDLE_FLAG_TIME_VALID,
+ .exit_latency = 1,
+ .target_residency = 1,
+ .enter = &intel_idle },
+ {
+ .name = "C1E-IVT-8S",
+ .desc = "MWAIT 0x01",
+ .flags = MWAIT2flg(0x01) | CPUIDLE_FLAG_TIME_VALID,
+ .exit_latency = 10,
+ .target_residency = 500,
+ .enter = &intel_idle },
+ {
+ .name = "C3-IVT-8S",
+ .desc = "MWAIT 0x10",
+ .flags = MWAIT2flg(0x10) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .exit_latency = 59,
+ .target_residency = 600,
+ .enter = &intel_idle },
+ {
+ .name = "C6-IVT-8S",
+ .desc = "MWAIT 0x20",
+ .flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .exit_latency = 88,
+ .target_residency = 700,
+ .enter = &intel_idle },
+ {
+ .enter = NULL }
+};
+
static struct cpuidle_state hsw_cstates[] = {
{
.name = "C1-HSW",
@@ -464,11 +610,21 @@ static const struct idle_cpu idle_cpu_snb = {
.disable_promotion_to_c1e = true,
};
+static const struct idle_cpu idle_cpu_byt = {
+ .state_table = byt_cstates,
+ .disable_promotion_to_c1e = true,
+};
+
static const struct idle_cpu idle_cpu_ivb = {
.state_table = ivb_cstates,
.disable_promotion_to_c1e = true,
};
+static const struct idle_cpu idle_cpu_ivt = {
+ .state_table = ivt_cstates,
+ .disable_promotion_to_c1e = true,
+};
+
static const struct idle_cpu idle_cpu_hsw = {
.state_table = hsw_cstates,
.disable_promotion_to_c1e = true,
@@ -494,8 +650,10 @@ static const struct x86_cpu_id intel_idle_ids[] = {
ICPU(0x2f, idle_cpu_nehalem),
ICPU(0x2a, idle_cpu_snb),
ICPU(0x2d, idle_cpu_snb),
+ ICPU(0x36, idle_cpu_atom),
+ ICPU(0x37, idle_cpu_byt),
ICPU(0x3a, idle_cpu_ivb),
- ICPU(0x3e, idle_cpu_ivb),
+ ICPU(0x3e, idle_cpu_ivt),
ICPU(0x3c, idle_cpu_hsw),
ICPU(0x3f, idle_cpu_hsw),
ICPU(0x45, idle_cpu_hsw),
@@ -572,6 +730,39 @@ static void intel_idle_cpuidle_devices_uninit(void)
free_percpu(intel_idle_cpuidle_devices);
return;
}
+
+/*
+ * intel_idle_state_table_update()
+ *
+ * Update the default state_table for this CPU-id
+ *
+ * Currently used to access tuned IVT multi-socket targets
+ * Assumption: num_sockets == (max_package_num + 1)
+ */
+void intel_idle_state_table_update(void)
+{
+ /* IVT uses a different table for 1-2, 3-4, and > 4 sockets */
+ if (boot_cpu_data.x86_model == 0x3e) { /* IVT */
+ int cpu, package_num, num_sockets = 1;
+
+ for_each_online_cpu(cpu) {
+ package_num = topology_physical_package_id(cpu);
+ if (package_num + 1 > num_sockets) {
+ num_sockets = package_num + 1;
+
+ if (num_sockets > 4)
+ cpuidle_state_table = ivt_cstates_8s;
+ return;
+ }
+ }
+
+ if (num_sockets > 2)
+ cpuidle_state_table = ivt_cstates_4s;
+ /* else, 1 and 2 socket systems use default ivt_cstates */
+ }
+ return;
+}
+
/*
* intel_idle_cpuidle_driver_init()
* allocate, initialize cpuidle_states
@@ -581,10 +772,12 @@ static int __init intel_idle_cpuidle_driver_init(void)
int cstate;
struct cpuidle_driver *drv = &intel_idle_driver;
+ intel_idle_state_table_update();
+
drv->state_count = 1;
for (cstate = 0; cstate < CPUIDLE_STATE_MAX; ++cstate) {
- int num_substates, mwait_hint, mwait_cstate, mwait_substate;
+ int num_substates, mwait_hint, mwait_cstate;
if (cpuidle_state_table[cstate].enter == NULL)
break;
@@ -597,14 +790,13 @@ static int __init intel_idle_cpuidle_driver_init(void)
mwait_hint = flg2MWAIT(cpuidle_state_table[cstate].flags);
mwait_cstate = MWAIT_HINT2CSTATE(mwait_hint);
- mwait_substate = MWAIT_HINT2SUBSTATE(mwait_hint);
- /* does the state exist in CPUID.MWAIT? */
+ /* number of sub-states for this state in CPUID.MWAIT */
num_substates = (mwait_substates >> ((mwait_cstate + 1) * 4))
& MWAIT_SUBSTATE_MASK;
- /* if sub-state in table is not enumerated by CPUID */
- if ((mwait_substate + 1) > num_substates)
+ /* if NO sub-states for this state in CPUID, skip it */
+ if (num_substates == 0)
continue;
if (((mwait_cstate + 1) > 2) &&
diff --git a/tools/power/x86/turbostat/turbostat.8 b/tools/power/x86/turbostat/turbostat.8
index b4ddb74..56bfb52 100644
--- a/tools/power/x86/turbostat/turbostat.8
+++ b/tools/power/x86/turbostat/turbostat.8
@@ -47,21 +47,22 @@ displays the statistics gathered since it was forked.
.PP
.SH FIELD DESCRIPTIONS
.nf
-\fBpk\fP processor package number.
-\fBcor\fP processor core number.
+\fBPackage\fP processor package number.
+\fBCore\fP processor core number.
\fBCPU\fP Linux CPU (logical processor) number.
Note that multiple CPUs per core indicate support for Intel(R) Hyper-Threading Technology.
-\fB%c0\fP percent of the interval that the CPU retired instructions.
-\fBGHz\fP average clock rate while the CPU was in c0 state.
-\fBTSC\fP average GHz that the TSC ran during the entire interval.
-\fB%c1, %c3, %c6, %c7\fP show the percentage residency in hardware core idle states.
-\fBCTMP\fP Degrees Celsius reported by the per-core Digital Thermal Sensor.
-\fBPTMP\fP Degrees Celsius reported by the per-package Package Thermal Monitor.
-\fB%pc2, %pc3, %pc6, %pc7\fP percentage residency in hardware package idle states.
-\fBPkg_W\fP Watts consumed by the whole package.
-\fBCor_W\fP Watts consumed by the core part of the package.
-\fBGFX_W\fP Watts consumed by the Graphics part of the package -- available only on client processors.
-\fBRAM_W\fP Watts consumed by the DRAM DIMMS -- available only on server processors.
+\fBAVG_MHz\fP number of cycles executed divided by time elapsed.
+\fB%Buzy\fP percent of the interval that the CPU retired instructions, aka. % of time in "C0" state.
+\fBBzy_MHz\fP average clock rate while the CPU was busy (in "c0" state).
+\fBTSC_MHz\fP average MHz that the TSC ran during the entire interval.
+\fBCPU%c1, CPU%c3, CPU%c6, CPU%c7\fP show the percentage residency in hardware core idle states.
+\fBCoreTmp\fP Degrees Celsius reported by the per-core Digital Thermal Sensor.
+\fBPkgTtmp\fP Degrees Celsius reported by the per-package Package Thermal Monitor.
+\fBPkg%pc2, Pkg%pc3, Pkg%pc6, Pkg%pc7\fP percentage residency in hardware package idle states.
+\fBPkgWatt\fP Watts consumed by the whole package.
+\fBCorWatt\fP Watts consumed by the core part of the package.
+\fBGFXWatt\fP Watts consumed by the Graphics part of the package -- available only on client processors.
+\fBRAMWatt\fP Watts consumed by the DRAM DIMMS -- available only on server processors.
\fBPKG_%\fP percent of the interval that RAPL throttling was active on the Package.
\fBRAM_%\fP percent of the interval that RAPL throttling was active on DRAM.
.fi
@@ -78,29 +79,17 @@ For Watts columns, the summary is a system total.
Subsequent rows show per-CPU statistics.
.nf
-[root@sandy]# ./turbostat
-cor CPU %c0 GHz TSC %c1 %c3 %c6 %c7 CTMP PTMP %pc2 %pc3 %pc6 %pc7 Pkg_W Cor_W GFX_W
- 0.06 0.80 2.29 0.11 0.00 0.00 99.83 47 40 0.26 0.01 0.44 98.78 3.49 0.12 0.14
- 0 0 0.07 0.80 2.29 0.07 0.00 0.00 99.86 40 40 0.26 0.01 0.44 98.78 3.49 0.12 0.14
- 0 4 0.03 0.80 2.29 0.12
- 1 1 0.04 0.80 2.29 0.25 0.01 0.00 99.71 40
- 1 5 0.16 0.80 2.29 0.13
- 2 2 0.05 0.80 2.29 0.06 0.01 0.00 99.88 40
- 2 6 0.03 0.80 2.29 0.08
- 3 3 0.05 0.80 2.29 0.08 0.00 0.00 99.87 47
- 3 7 0.04 0.84 2.29 0.09
-.fi
-.SH SUMMARY EXAMPLE
-The "-s" option prints the column headers just once,
-and then the one line system summary for each sample interval.
-
-.nf
-[root@wsm]# turbostat -S
- %c0 GHz TSC %c1 %c3 %c6 CTMP %pc3 %pc6
- 1.40 2.81 3.38 10.78 43.47 44.35 42 13.67 2.09
- 1.34 2.90 3.38 11.48 58.96 28.23 41 19.89 0.15
- 1.55 2.72 3.38 26.73 37.66 34.07 42 2.53 2.80
- 1.37 2.83 3.38 16.95 60.05 21.63 42 5.76 0.20
+[root@ivy]# ./turbostat
+ Core CPU Avg_MHz %Busy Bzy_MHz TSC_MHz SMI CPU%c1 CPU%c3 CPU%c6 CPU%c7 CoreTmp PkgTmp Pkg%pc2 Pkg%pc3 Pkg%pc6 Pkg%pc7 PkgWatt CorWatt GFXWatt
+ - - 6 0.36 1596 3492 0 0.59 0.01 99.04 0.00 23 24 23.82 0.01 72.47 0.00 6.40 1.01 0.00
+ 0 0 9 0.58 1596 3492 0 0.28 0.01 99.13 0.00 23 24 23.82 0.01 72.47 0.00 6.40 1.01 0.00
+ 0 4 1 0.07 1596 3492 0 0.79
+ 1 1 10 0.65 1596 3492 0 0.59 0.00 98.76 0.00 23
+ 1 5 5 0.28 1596 3492 0 0.95
+ 2 2 10 0.66 1596 3492 0 0.41 0.01 98.92 0.00 23
+ 2 6 2 0.10 1597 3492 0 0.97
+ 3 3 3 0.20 1596 3492 0 0.44 0.00 99.37 0.00 23
+ 3 7 5 0.31 1596 3492 0 0.33
.fi
.SH VERBOSE EXAMPLE
The "-v" option adds verbosity to the output:
@@ -154,55 +143,35 @@ eg. Here a cycle soaker is run on 1 CPU (see %c0) for a few seconds
until ^C while the other CPUs are mostly idle:
.nf
-[root@x980 lenb]# ./turbostat cat /dev/zero > /dev/null
+root@ivy: turbostat cat /dev/zero > /dev/null
^C
-cor CPU %c0 GHz TSC %c1 %c3 %c6 %pc3 %pc6
- 8.86 3.61 3.38 15.06 31.19 44.89 0.00 0.00
- 0 0 1.46 3.22 3.38 16.84 29.48 52.22 0.00 0.00
- 0 6 0.21 3.06 3.38 18.09
- 1 2 0.53 3.33 3.38 2.80 46.40 50.27
- 1 8 0.89 3.47 3.38 2.44
- 2 4 1.36 3.43 3.38 9.04 23.71 65.89
- 2 10 0.18 2.86 3.38 10.22
- 8 1 0.04 2.87 3.38 99.96 0.01 0.00
- 8 7 99.72 3.63 3.38 0.27
- 9 3 0.31 3.21 3.38 7.64 56.55 35.50
- 9 9 0.08 2.95 3.38 7.88
- 10 5 1.42 3.43 3.38 2.14 30.99 65.44
- 10 11 0.16 2.88 3.38 3.40
+ Core CPU Avg_MHz %Busy Bzy_MHz TSC_MHz SMI CPU%c1 CPU%c3 CPU%c6 CPU%c7 CoreTmp PkgTmp Pkg%pc2 Pkg%pc3 Pkg%pc6 Pkg%pc7 PkgWatt CorWatt GFXWatt
+ - - 496 12.75 3886 3492 0 13.16 0.04 74.04 0.00 36 36 0.00 0.00 0.00 0.00 23.15 17.65 0.00
+ 0 0 22 0.57 3830 3492 0 0.83 0.02 98.59 0.00 27 36 0.00 0.00 0.00 0.00 23.15 17.65 0.00
+ 0 4 9 0.24 3829 3492 0 1.15
+ 1 1 4 0.09 3783 3492 0 99.91 0.00 0.00 0.00 36
+ 1 5 3880 99.82 3888 3492 0 0.18
+ 2 2 17 0.44 3813 3492 0 0.77 0.04 98.75 0.00 28
+ 2 6 12 0.32 3823 3492 0 0.89
+ 3 3 16 0.43 3844 3492 0 0.63 0.11 98.84 0.00 30
+ 3 7 4 0.11 3827 3492 0 0.94
+30.372243 sec
+
.fi
-Above the cycle soaker drives cpu7 up its 3.6 GHz turbo limit
+Above the cycle soaker drives cpu5 up its 3.8 GHz turbo limit
while the other processors are generally in various states of idle.
-Note that cpu1 and cpu7 are HT siblings within core8.
-As cpu7 is very busy, it prevents its sibling, cpu1,
+Note that cpu1 and cpu5 are HT siblings within core1.
+As cpu5 is very busy, it prevents its sibling, cpu1,
from entering a c-state deeper than c1.
-Note that turbostat reports average GHz of 3.63, while
-the arithmetic average of the GHz column above is lower.
-This is a weighted average, where the weight is %c0. ie. it is the total number of
-un-halted cycles elapsed per time divided by the number of CPUs.
-.SH SMI COUNTING EXAMPLE
-On Intel Nehalem and newer processors, MSR 0x34 is a System Management Mode Interrupt (SMI) counter.
-This counter is shown by default under the "SMI" column.
-.nf
-[root@x980 ~]# turbostat
-cor CPU %c0 GHz TSC SMI %c1 %c3 %c6 CTMP %pc3 %pc6
- 0.11 1.91 3.38 0 1.84 0.26 97.79 29 0.82 83.87
- 0 0 0.40 1.63 3.38 0 10.27 0.12 89.20 20 0.82 83.88
- 0 6 0.06 1.63 3.38 0 10.61
- 1 2 0.37 2.63 3.38 0 0.02 0.10 99.51 22
- 1 8 0.01 1.62 3.38 0 0.39
- 2 4 0.07 1.62 3.38 0 0.04 0.07 99.82 23
- 2 10 0.02 1.62 3.38 0 0.09
- 8 1 0.23 1.64 3.38 0 0.10 1.07 98.60 24
- 8 7 0.02 1.64 3.38 0 0.31
- 9 3 0.03 1.62 3.38 0 0.03 0.05 99.89 29
- 9 9 0.02 1.62 3.38 0 0.05
- 10 5 0.07 1.62 3.38 0 0.08 0.12 99.73 27
- 10 11 0.03 1.62 3.38 0 0.13
-^C
-.fi
+Note that the Avg_MHz column reflects the total number of cycles executed
+divided by the measurement interval. If the %Busy column is 100%,
+then the processor was running at that speed the entire interval.
+The Avg_MHz multiplied by the %Busy results in the Bzy_MHz --
+which is the average frequency while the processor was executing --
+not including any non-busy idle time.
+
.SH NOTES
.B "turbostat "
diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c
index 77eb130..7c9d8e7 100644
--- a/tools/power/x86/turbostat/turbostat.c
+++ b/tools/power/x86/turbostat/turbostat.c
@@ -56,7 +56,7 @@ unsigned int do_slm_cstates;
unsigned int use_c1_residency_msr;
unsigned int has_aperf;
unsigned int has_epb;
-unsigned int units = 1000000000; /* Ghz etc */
+unsigned int units = 1000000; /* MHz etc */
unsigned int genuine_intel;
unsigned int has_invariant_tsc;
unsigned int do_nehalem_platform_info;
@@ -264,88 +264,93 @@ int get_msr(int cpu, off_t offset, unsigned long long *msr)
return 0;
}
+/*
+ * Example Format w/ field column widths:
+ *
+ * Package Core CPU Avg_MHz Bzy_MHz TSC_MHz SMI %Busy CPU_%c1 CPU_%c3 CPU_%c6 CPU_%c7 CoreTmp PkgTmp Pkg%pc2 Pkg%pc3 Pkg%pc6 Pkg%pc7 PkgWatt CorWatt GFXWatt
+ * 1234567 1234567 1234567 1234567 1234567 1234567 1234567 1234567 1234567 1234567 1234567 1234567 1234567 1234567 1234567 1234567 1234567 1234567 1234567 1234567 1234567
+ */
+
void print_header(void)
{
if (show_pkg)
- outp += sprintf(outp, "pk");
- if (show_pkg)
- outp += sprintf(outp, " ");
+ outp += sprintf(outp, "Package ");
if (show_core)
- outp += sprintf(outp, "cor");
+ outp += sprintf(outp, " Core ");
if (show_cpu)
- outp += sprintf(outp, " CPU");
- if (show_pkg || show_core || show_cpu)
- outp += sprintf(outp, " ");
+ outp += sprintf(outp, " CPU ");
+ if (has_aperf)
+ outp += sprintf(outp, "Avg_MHz ");
if (do_nhm_cstates)
- outp += sprintf(outp, " %%c0");
+ outp += sprintf(outp, " %%Busy ");
if (has_aperf)
- outp += sprintf(outp, " GHz");
- outp += sprintf(outp, " TSC");
+ outp += sprintf(outp, "Bzy_MHz ");
+ outp += sprintf(outp, "TSC_MHz ");
if (do_smi)
- outp += sprintf(outp, " SMI");
+ outp += sprintf(outp, " SMI ");
if (extra_delta_offset32)
- outp += sprintf(outp, " count 0x%03X", extra_delta_offset32);
+ outp += sprintf(outp, " count 0x%03X ", extra_delta_offset32);
if (extra_delta_offset64)
- outp += sprintf(outp, " COUNT 0x%03X", extra_delta_offset64);
+ outp += sprintf(outp, " COUNT 0x%03X ", extra_delta_offset64);
if (extra_msr_offset32)
- outp += sprintf(outp, " MSR 0x%03X", extra_msr_offset32);
+ outp += sprintf(outp, " MSR 0x%03X ", extra_msr_offset32);
if (extra_msr_offset64)
- outp += sprintf(outp, " MSR 0x%03X", extra_msr_offset64);
+ outp += sprintf(outp, " MSR 0x%03X ", extra_msr_offset64);
if (do_nhm_cstates)
- outp += sprintf(outp, " %%c1");
+ outp += sprintf(outp, " CPU%%c1 ");
if (do_nhm_cstates && !do_slm_cstates)
- outp += sprintf(outp, " %%c3");
+ outp += sprintf(outp, " CPU%%c3 ");
if (do_nhm_cstates)
- outp += sprintf(outp, " %%c6");
+ outp += sprintf(outp, " CPU%%c6 ");
if (do_snb_cstates)
- outp += sprintf(outp, " %%c7");
+ outp += sprintf(outp, " CPU%%c7 ");
if (do_dts)
- outp += sprintf(outp, " CTMP");
+ outp += sprintf(outp, "CoreTmp ");
if (do_ptm)
- outp += sprintf(outp, " PTMP");
+ outp += sprintf(outp, " PkgTmp ");
if (do_snb_cstates)
- outp += sprintf(outp, " %%pc2");
+ outp += sprintf(outp, "Pkg%%pc2 ");
if (do_nhm_cstates && !do_slm_cstates)
- outp += sprintf(outp, " %%pc3");
+ outp += sprintf(outp, "Pkg%%pc3 ");
if (do_nhm_cstates && !do_slm_cstates)
- outp += sprintf(outp, " %%pc6");
+ outp += sprintf(outp, "Pkg%%pc6 ");
if (do_snb_cstates)
- outp += sprintf(outp, " %%pc7");
+ outp += sprintf(outp, "Pkg%%pc7 ");
if (do_c8_c9_c10) {
- outp += sprintf(outp, " %%pc8");
- outp += sprintf(outp, " %%pc9");
- outp += sprintf(outp, " %%pc10");
+ outp += sprintf(outp, "Pkg%%pc8 ");
+ outp += sprintf(outp, "Pkg%%pc9 ");
+ outp += sprintf(outp, "Pk%%pc10 ");
}
if (do_rapl && !rapl_joules) {
if (do_rapl & RAPL_PKG)
- outp += sprintf(outp, " Pkg_W");
+ outp += sprintf(outp, "PkgWatt ");
if (do_rapl & RAPL_CORES)
- outp += sprintf(outp, " Cor_W");
+ outp += sprintf(outp, "CorWatt ");
if (do_rapl & RAPL_GFX)
- outp += sprintf(outp, " GFX_W");
+ outp += sprintf(outp, "GFXWatt ");
if (do_rapl & RAPL_DRAM)
- outp += sprintf(outp, " RAM_W");
+ outp += sprintf(outp, "RAMWatt ");
if (do_rapl & RAPL_PKG_PERF_STATUS)
- outp += sprintf(outp, " PKG_%%");
+ outp += sprintf(outp, " PKG_%% ");
if (do_rapl & RAPL_DRAM_PERF_STATUS)
- outp += sprintf(outp, " RAM_%%");
+ outp += sprintf(outp, " RAM_%% ");
} else {
if (do_rapl & RAPL_PKG)
- outp += sprintf(outp, " Pkg_J");
+ outp += sprintf(outp, " Pkg_J ");
if (do_rapl & RAPL_CORES)
- outp += sprintf(outp, " Cor_J");
+ outp += sprintf(outp, " Cor_J ");
if (do_rapl & RAPL_GFX)
- outp += sprintf(outp, " GFX_J");
+ outp += sprintf(outp, " GFX_J ");
if (do_rapl & RAPL_DRAM)
- outp += sprintf(outp, " RAM_W");
+ outp += sprintf(outp, " RAM_W ");
if (do_rapl & RAPL_PKG_PERF_STATUS)
- outp += sprintf(outp, " PKG_%%");
+ outp += sprintf(outp, " PKG_%% ");
if (do_rapl & RAPL_DRAM_PERF_STATUS)
- outp += sprintf(outp, " RAM_%%");
- outp += sprintf(outp, " time");
+ outp += sprintf(outp, " RAM_%% ");
+ outp += sprintf(outp, " time ");
}
outp += sprintf(outp, "\n");
@@ -410,25 +415,12 @@ int dump_counters(struct thread_data *t, struct core_data *c,
/*
* column formatting convention & formats
- * package: "pk" 2 columns %2d
- * core: "cor" 3 columns %3d
- * CPU: "CPU" 3 columns %3d
- * Pkg_W: %6.2
- * Cor_W: %6.2
- * GFX_W: %5.2
- * RAM_W: %5.2
- * GHz: "GHz" 3 columns %3.2
- * TSC: "TSC" 3 columns %3.2
- * SMI: "SMI" 4 columns %4d
- * percentage " %pc3" %6.2
- * Perf Status percentage: %5.2
- * "CTMP" 4 columns %4d
*/
int format_counters(struct thread_data *t, struct core_data *c,
struct pkg_data *p)
{
double interval_float;
- char *fmt5, *fmt6;
+ char *fmt8;
/* if showing only 1st thread in core and this isn't one, bail out */
if (show_core_only && !(t->flags & CPU_IS_FIRST_THREAD_IN_CORE))
@@ -443,65 +435,52 @@ int format_counters(struct thread_data *t, struct core_data *c,
/* topo columns, print blanks on 1st (average) line */
if (t == &average.threads) {
if (show_pkg)
- outp += sprintf(outp, " ");
- if (show_pkg && show_core)
- outp += sprintf(outp, " ");
+ outp += sprintf(outp, " -");
if (show_core)
- outp += sprintf(outp, " ");
+ outp += sprintf(outp, " -");
if (show_cpu)
- outp += sprintf(outp, " " " ");
+ outp += sprintf(outp, " -");
} else {
if (show_pkg) {
if (p)
- outp += sprintf(outp, "%2d", p->package_id);
+ outp += sprintf(outp, "%8d", p->package_id);
else
- outp += sprintf(outp, " ");
+ outp += sprintf(outp, " -");
}
- if (show_pkg && show_core)
- outp += sprintf(outp, " ");
if (show_core) {
if (c)
- outp += sprintf(outp, "%3d", c->core_id);
+ outp += sprintf(outp, "%8d", c->core_id);
else
- outp += sprintf(outp, " ");
+ outp += sprintf(outp, " -");
}
if (show_cpu)
- outp += sprintf(outp, " %3d", t->cpu_id);
+ outp += sprintf(outp, "%8d", t->cpu_id);
}
+
+ /* AvgMHz */
+ if (has_aperf)
+ outp += sprintf(outp, "%8.0f",
+ 1.0 / units * t->aperf / interval_float);
+
/* %c0 */
if (do_nhm_cstates) {
- if (show_pkg || show_core || show_cpu)
- outp += sprintf(outp, " ");
if (!skip_c0)
- outp += sprintf(outp, "%6.2f", 100.0 * t->mperf/t->tsc);
+ outp += sprintf(outp, "%8.2f", 100.0 * t->mperf/t->tsc);
else
- outp += sprintf(outp, " ****");
+ outp += sprintf(outp, "********");
}
- /* GHz */
- if (has_aperf) {
- if (!aperf_mperf_unstable) {
- outp += sprintf(outp, " %3.2f",
- 1.0 * t->tsc / units * t->aperf /
- t->mperf / interval_float);
- } else {
- if (t->aperf > t->tsc || t->mperf > t->tsc) {
- outp += sprintf(outp, " ***");
- } else {
- outp += sprintf(outp, "%3.1f*",
- 1.0 * t->tsc /
- units * t->aperf /
- t->mperf / interval_float);
- }
- }
- }
+ /* BzyMHz */
+ if (has_aperf)
+ outp += sprintf(outp, "%8.0f",
+ 1.0 * t->tsc / units * t->aperf / t->mperf / interval_float);
/* TSC */
- outp += sprintf(outp, "%5.2f", 1.0 * t->tsc/units/interval_float);
+ outp += sprintf(outp, "%8.0f", 1.0 * t->tsc/units/interval_float);
/* SMI */
if (do_smi)
- outp += sprintf(outp, "%4d", t->smi_count);
+ outp += sprintf(outp, "%8d", t->smi_count);
/* delta */
if (extra_delta_offset32)
@@ -520,9 +499,9 @@ int format_counters(struct thread_data *t, struct core_data *c,
if (do_nhm_cstates) {
if (!skip_c1)
- outp += sprintf(outp, " %6.2f", 100.0 * t->c1/t->tsc);
+ outp += sprintf(outp, "%8.2f", 100.0 * t->c1/t->tsc);
else
- outp += sprintf(outp, " ****");
+ outp += sprintf(outp, "********");
}
/* print per-core data only for 1st thread in core */
@@ -530,79 +509,76 @@ int format_counters(struct thread_data *t, struct core_data *c,
goto done;
if (do_nhm_cstates && !do_slm_cstates)
- outp += sprintf(outp, " %6.2f", 100.0 * c->c3/t->tsc);
+ outp += sprintf(outp, "%8.2f", 100.0 * c->c3/t->tsc);
if (do_nhm_cstates)
- outp += sprintf(outp, " %6.2f", 100.0 * c->c6/t->tsc);
+ outp += sprintf(outp, "%8.2f", 100.0 * c->c6/t->tsc);
if (do_snb_cstates)
- outp += sprintf(outp, " %6.2f", 100.0 * c->c7/t->tsc);
+ outp += sprintf(outp, "%8.2f", 100.0 * c->c7/t->tsc);
if (do_dts)
- outp += sprintf(outp, " %4d", c->core_temp_c);
+ outp += sprintf(outp, "%8d", c->core_temp_c);
/* print per-package data only for 1st core in package */
if (!(t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE))
goto done;
if (do_ptm)
- outp += sprintf(outp, " %4d", p->pkg_temp_c);
+ outp += sprintf(outp, "%8d", p->pkg_temp_c);
if (do_snb_cstates)
- outp += sprintf(outp, " %6.2f", 100.0 * p->pc2/t->tsc);
+ outp += sprintf(outp, "%8.2f", 100.0 * p->pc2/t->tsc);
if (do_nhm_cstates && !do_slm_cstates)
- outp += sprintf(outp, " %6.2f", 100.0 * p->pc3/t->tsc);
+ outp += sprintf(outp, "%8.2f", 100.0 * p->pc3/t->tsc);
if (do_nhm_cstates && !do_slm_cstates)
- outp += sprintf(outp, " %6.2f", 100.0 * p->pc6/t->tsc);
+ outp += sprintf(outp, "%8.2f", 100.0 * p->pc6/t->tsc);
if (do_snb_cstates)
- outp += sprintf(outp, " %6.2f", 100.0 * p->pc7/t->tsc);
+ outp += sprintf(outp, "%8.2f", 100.0 * p->pc7/t->tsc);
if (do_c8_c9_c10) {
- outp += sprintf(outp, " %6.2f", 100.0 * p->pc8/t->tsc);
- outp += sprintf(outp, " %6.2f", 100.0 * p->pc9/t->tsc);
- outp += sprintf(outp, " %6.2f", 100.0 * p->pc10/t->tsc);
+ outp += sprintf(outp, "%8.2f", 100.0 * p->pc8/t->tsc);
+ outp += sprintf(outp, "%8.2f", 100.0 * p->pc9/t->tsc);
+ outp += sprintf(outp, "%8.2f", 100.0 * p->pc10/t->tsc);
}
/*
* If measurement interval exceeds minimum RAPL Joule Counter range,
* indicate that results are suspect by printing "**" in fraction place.
*/
- if (interval_float < rapl_joule_counter_range) {
- fmt5 = " %5.2f";
- fmt6 = " %6.2f";
- } else {
- fmt5 = " %3.0f**";
- fmt6 = " %4.0f**";
- }
+ if (interval_float < rapl_joule_counter_range)
+ fmt8 = "%8.2f";
+ else
+ fmt8 = " %6.0f**";
if (do_rapl && !rapl_joules) {
if (do_rapl & RAPL_PKG)
- outp += sprintf(outp, fmt6, p->energy_pkg * rapl_energy_units / interval_float);
+ outp += sprintf(outp, fmt8, p->energy_pkg * rapl_energy_units / interval_float);
if (do_rapl & RAPL_CORES)
- outp += sprintf(outp, fmt6, p->energy_cores * rapl_energy_units / interval_float);
+ outp += sprintf(outp, fmt8, p->energy_cores * rapl_energy_units / interval_float);
if (do_rapl & RAPL_GFX)
- outp += sprintf(outp, fmt5, p->energy_gfx * rapl_energy_units / interval_float);
+ outp += sprintf(outp, fmt8, p->energy_gfx * rapl_energy_units / interval_float);
if (do_rapl & RAPL_DRAM)
- outp += sprintf(outp, fmt5, p->energy_dram * rapl_energy_units / interval_float);
+ outp += sprintf(outp, fmt8, p->energy_dram * rapl_energy_units / interval_float);
if (do_rapl & RAPL_PKG_PERF_STATUS)
- outp += sprintf(outp, fmt5, 100.0 * p->rapl_pkg_perf_status * rapl_time_units / interval_float);
+ outp += sprintf(outp, fmt8, 100.0 * p->rapl_pkg_perf_status * rapl_time_units / interval_float);
if (do_rapl & RAPL_DRAM_PERF_STATUS)
- outp += sprintf(outp, fmt5, 100.0 * p->rapl_dram_perf_status * rapl_time_units / interval_float);
+ outp += sprintf(outp, fmt8, 100.0 * p->rapl_dram_perf_status * rapl_time_units / interval_float);
} else {
if (do_rapl & RAPL_PKG)
- outp += sprintf(outp, fmt6,
+ outp += sprintf(outp, fmt8,
p->energy_pkg * rapl_energy_units);
if (do_rapl & RAPL_CORES)
- outp += sprintf(outp, fmt6,
+ outp += sprintf(outp, fmt8,
p->energy_cores * rapl_energy_units);
if (do_rapl & RAPL_GFX)
- outp += sprintf(outp, fmt5,
+ outp += sprintf(outp, fmt8,
p->energy_gfx * rapl_energy_units);
if (do_rapl & RAPL_DRAM)
- outp += sprintf(outp, fmt5,
+ outp += sprintf(outp, fmt8,
p->energy_dram * rapl_energy_units);
if (do_rapl & RAPL_PKG_PERF_STATUS)
- outp += sprintf(outp, fmt5, 100.0 * p->rapl_pkg_perf_status * rapl_time_units / interval_float);
+ outp += sprintf(outp, fmt8, 100.0 * p->rapl_pkg_perf_status * rapl_time_units / interval_float);
if (do_rapl & RAPL_DRAM_PERF_STATUS)
- outp += sprintf(outp, fmt5, 100.0 * p->rapl_dram_perf_status * rapl_time_units / interval_float);
- outp += sprintf(outp, fmt5, interval_float);
+ outp += sprintf(outp, fmt8, 100.0 * p->rapl_dram_perf_status * rapl_time_units / interval_float);
+ outp += sprintf(outp, fmt8, interval_float);
}
done:
@@ -1516,6 +1492,9 @@ int has_nehalem_turbo_ratio_limit(unsigned int family, unsigned int model)
case 0x46: /* HSW */
case 0x37: /* BYT */
case 0x4D: /* AVN */
+ case 0x3D: /* BDW */
+ case 0x4F: /* BDX */
+ case 0x56: /* BDX-DE */
return 1;
case 0x2E: /* Nehalem-EX Xeon - Beckton */
case 0x2F: /* Westmere-EX Xeon - Eagleton */
@@ -1629,9 +1608,12 @@ void rapl_probe(unsigned int family, unsigned int model)
case 0x3C: /* HSW */
case 0x45: /* HSW */
case 0x46: /* HSW */
+ case 0x3D: /* BDW */
do_rapl = RAPL_PKG | RAPL_CORES | RAPL_CORE_POLICY | RAPL_GFX | RAPL_PKG_POWER_INFO;
break;
case 0x3F: /* HSX */
+ case 0x4F: /* BDX */
+ case 0x56: /* BDX-DE */
do_rapl = RAPL_PKG | RAPL_DRAM | RAPL_DRAM_PERF_STATUS | RAPL_PKG_PERF_STATUS | RAPL_PKG_POWER_INFO;
break;
case 0x2D:
@@ -1875,6 +1857,9 @@ int is_snb(unsigned int family, unsigned int model)
case 0x3F: /* HSW */
case 0x45: /* HSW */
case 0x46: /* HSW */
+ case 0x3D: /* BDW */
+ case 0x4F: /* BDX */
+ case 0x56: /* BDX-DE */
return 1;
}
return 0;
@@ -1886,7 +1871,8 @@ int has_c8_c9_c10(unsigned int family, unsigned int model)
return 0;
switch (model) {
- case 0x45:
+ case 0x45: /* HSW */
+ case 0x3D: /* BDW */
return 1;
}
return 0;
@@ -2455,7 +2441,7 @@ int main(int argc, char **argv)
cmdline(argc, argv);
if (verbose)
- fprintf(stderr, "turbostat v3.6 Dec 2, 2013"
+ fprintf(stderr, "turbostat v3.7 Feb 6, 2014"
" - Len Brown <lenb@kernel.org>\n");
turbostat_init();
OpenPOWER on IntegriCloud