diff options
| -rw-r--r-- | MAINTAINERS | 5 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/Kconfig | 9 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/Makefile | 1 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/tosa.c | 162 | ||||
| -rw-r--r-- | include/asm-arm/arch-pxa/tosa.h | 166 |
5 files changed, 341 insertions, 2 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 983f9e9..23337f8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -297,6 +297,11 @@ P: Richard Purdie M: rpurdie@rpsys.net S: Maintained +ARM/TOSA MACHINE SUPPORT +P: Dirk Opfer +M: dirk@opfer-online.de +S: Maintained + ARM/PLEB SUPPORT P: Peter Chubb M: pleb@gelato.unsw.edu.au diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 3e5f69b..b380a438 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -27,7 +27,8 @@ config PXA_SHARPSL Say Y here if you intend to run this kernel on a Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi), SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita), - SL-C3000 (Spitz) or SL-C3100 (Borzoi) handheld computer. + SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa) + handheld computer. endchoice @@ -37,7 +38,7 @@ choice prompt "Select target Sharp Zaurus device range" config PXA_SHARPSL_25x - bool "Sharp PXA25x models (SL-5600 and SL-C7xx)" + bool "Sharp PXA25x models (SL-5600, SL-C7xx and SL-C6000x)" select PXA25x config PXA_SHARPSL_27x @@ -80,6 +81,10 @@ config MACH_BORZOI depends PXA_SHARPSL_27x select PXA_SHARP_Cxx00 +config MACH_TOSA + bool "Enable Sharp SL-6000x (Tosa) Support" + depends PXA_SHARPSL + config PXA25x bool help diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index f609a0f..8bc72d0 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_ARCH_PXA_IDP) += idp.o obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o corgi_lcd.o ssp.o obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o corgi_ssp.o corgi_lcd.o ssp.o obj-$(CONFIG_MACH_POODLE) += poodle.o +obj-$(CONFIG_MACH_TOSA) += tosa.o # Support for blinky lights led-y := leds.o diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c new file mode 100644 index 0000000..400609f --- /dev/null +++ b/arch/arm/mach-pxa/tosa.c @@ -0,0 +1,162 @@ +/* + * Support for Sharp SL-C6000x PDAs + * Model: (Tosa) + * + * Copyright (c) 2005 Dirk Opfer + * + * Based on code written by Sharp/Lineo for 2.4 kernels + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/major.h> +#include <linux/fs.h> +#include <linux/interrupt.h> +#include <linux/mmc/host.h> + +#include <asm/setup.h> +#include <asm/memory.h> +#include <asm/mach-types.h> +#include <asm/hardware.h> +#include <asm/irq.h> +#include <asm/arch/irda.h> +#include <asm/arch/mmc.h> +#include <asm/arch/udc.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <asm/arch/pxa-regs.h> +#include <asm/arch/irq.h> +#include <asm/arch/tosa.h> + +#include <asm/hardware/scoop.h> +#include <asm/mach/sharpsl_param.h> + +#include "generic.h" + + +/* + * SCOOP Device + */ +static struct resource tosa_scoop_resources[] = { + [0] = { + .start = TOSA_CF_PHYS, + .end = TOSA_CF_PHYS + 0xfff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct scoop_config tosa_scoop_setup = { + .io_dir = TOSA_SCOOP_IO_DIR, + .io_out = TOSA_SCOOP_IO_OUT, + +}; + +struct platform_device tosascoop_device = { + .name = "sharp-scoop", + .id = 0, + .dev = { + .platform_data = &tosa_scoop_setup, + }, + .num_resources = ARRAY_SIZE(tosa_scoop_resources), + .resource = tosa_scoop_resources, +}; + + +/* + * SCOOP Device Jacket + */ +static struct resource tosa_scoop_jc_resources[] = { + [0] = { + .start = TOSA_SCOOP_PHYS + 0x40, + .end = TOSA_SCOOP_PHYS + 0xfff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct scoop_config tosa_scoop_jc_setup = { + .io_dir = TOSA_SCOOP_JC_IO_DIR, + .io_out = TOSA_SCOOP_JC_IO_OUT, +}; + +struct platform_device tosascoop_jc_device = { + .name = "sharp-scoop", + .id = 1, + .dev = { + .platform_data = &tosa_scoop_jc_setup, + .parent = &tosascoop_device.dev, + }, + .num_resources = ARRAY_SIZE(tosa_scoop_jc_resources), + .resource = tosa_scoop_jc_resources, +}; + +static struct scoop_pcmcia_dev tosa_pcmcia_scoop[] = { +{ + .dev = &tosascoop_device.dev, + .irq = TOSA_IRQ_GPIO_CF_IRQ, + .cd_irq = TOSA_IRQ_GPIO_CF_CD, + .cd_irq_str = "PCMCIA0 CD", +},{ + .dev = &tosascoop_jc_device.dev, + .irq = TOSA_IRQ_GPIO_JC_CF_IRQ, + .cd_irq = -1, +}, +}; + + +static struct platform_device *devices[] __initdata = { + &tosascoop_device, + &tosascoop_jc_device, +}; + +static void __init tosa_init(void) +{ + pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_IN); + pxa_gpio_mode(TOSA_GPIO_TC6393_INT | GPIO_IN); + + /* setup sleep mode values */ + PWER = 0x00000002; + PFER = 0x00000000; + PRER = 0x00000002; + PGSR0 = 0x00000000; + PGSR1 = 0x00FF0002; + PGSR2 = 0x00014000; + PCFR |= PCFR_OPDE; + + // enable batt_fault + PMCR = 0x01; + + platform_add_devices(devices, ARRAY_SIZE(devices)); + + scoop_num = 2; + scoop_devs = &tosa_pcmcia_scoop[0]; +} + +static void __init fixup_tosa(struct machine_desc *desc, + struct tag *tags, char **cmdline, struct meminfo *mi) +{ + sharpsl_save_param(); + mi->nr_banks=1; + mi->bank[0].start = 0xa0000000; + mi->bank[0].node = 0; + mi->bank[0].size = (64*1024*1024); +} + +MACHINE_START(TOSA, "SHARP Tosa") + .phys_ram = 0xa0000000, + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .fixup = fixup_tosa, + .map_io = pxa_map_io, + .init_irq = pxa_init_irq, + .init_machine = tosa_init, + .timer = &pxa_timer, +MACHINE_END diff --git a/include/asm-arm/arch-pxa/tosa.h b/include/asm-arm/arch-pxa/tosa.h new file mode 100644 index 0000000..c3364a2 --- /dev/null +++ b/include/asm-arm/arch-pxa/tosa.h @@ -0,0 +1,166 @@ +/* + * Hardware specific definitions for Sharp SL-C6000x series of PDAs + * + * Copyright (c) 2005 Dirk Opfer + * + * Based on Sharp's 2.4 kernel patches + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#ifndef _ASM_ARCH_TOSA_H_ +#define _ASM_ARCH_TOSA_H_ 1 + +/* TOSA Chip selects */ +#define TOSA_LCDC_PHYS PXA_CS4_PHYS +/* Internel Scoop */ +#define TOSA_CF_PHYS (PXA_CS2_PHYS + 0x00800000) +/* Jacket Scoop */ +#define TOSA_SCOOP_PHYS (PXA_CS5_PHYS + 0x00800000) + +/* + * SCOOP2 internal GPIOs + */ +#define TOSA_SCOOP_PXA_VCORE1 SCOOP_GPCR_PA11 +#define TOSA_SCOOP_TC6393_REST_IN SCOOP_GPCR_PA12 +#define TOSA_SCOOP_IR_POWERDWN SCOOP_GPCR_PA13 +#define TOSA_SCOOP_SD_WP SCOOP_GPCR_PA14 +#define TOSA_SCOOP_PWR_ON SCOOP_GPCR_PA15 +#define TOSA_SCOOP_AUD_PWR_ON SCOOP_GPCR_PA16 +#define TOSA_SCOOP_BT_RESET SCOOP_GPCR_PA17 +#define TOSA_SCOOP_BT_PWR_EN SCOOP_GPCR_PA18 +#define TOSA_SCOOP_AC_IN_OL SCOOP_GPCR_PA19 + +/* GPIO Direction 1 : output mode / 0:input mode */ +#define TOSA_SCOOP_IO_DIR ( TOSA_SCOOP_PXA_VCORE1 | TOSA_SCOOP_TC6393_REST_IN | \ + TOSA_SCOOP_IR_POWERDWN | TOSA_SCOOP_PWR_ON | TOSA_SCOOP_AUD_PWR_ON |\ + TOSA_SCOOP_BT_RESET | TOSA_SCOOP_BT_PWR_EN ) +/* GPIO out put level when init 1: Hi */ +#define TOSA_SCOOP_IO_OUT ( TOSA_SCOOP_TC6393_REST_IN ) + +/* + * SCOOP2 jacket GPIOs + */ +#define TOSA_SCOOP_JC_BT_LED SCOOP_GPCR_PA11 +#define TOSA_SCOOP_JC_NOTE_LED SCOOP_GPCR_PA12 +#define TOSA_SCOOP_JC_CHRG_ERR_LED SCOOP_GPCR_PA13 +#define TOSA_SCOOP_JC_USB_PULLUP SCOOP_GPCR_PA14 +#define TOSA_SCOOP_JC_TC6393_SUSPEND SCOOP_GPCR_PA15 +#define TOSA_SCOOP_JC_TC3693_L3V_ON SCOOP_GPCR_PA16 +#define TOSA_SCOOP_JC_WLAN_DETECT SCOOP_GPCR_PA17 +#define TOSA_SCOOP_JC_WLAN_LED SCOOP_GPCR_PA18 +#define TOSA_SCOOP_JC_CARD_LIMIT_SEL SCOOP_GPCR_PA19 + +/* GPIO Direction 1 : output mode / 0:input mode */ +#define TOSA_SCOOP_JC_IO_DIR ( TOSA_SCOOP_JC_BT_LED | TOSA_SCOOP_JC_NOTE_LED | \ + TOSA_SCOOP_JC_CHRG_ERR_LED | TOSA_SCOOP_JC_USB_PULLUP | \ + TOSA_SCOOP_JC_TC6393_SUSPEND | TOSA_SCOOP_JC_TC3693_L3V_ON | \ + TOSA_SCOOP_JC_WLAN_LED | TOSA_SCOOP_JC_CARD_LIMIT_SEL ) +/* GPIO out put level when init 1: Hi */ +#define TOSA_SCOOP_JC_IO_OUT ( 0 ) + +/* + * Timing Generator + */ +#define TG_PNLCTL 0x00 +#define TG_TPOSCTL 0x01 +#define TG_DUTYCTL 0x02 +#define TG_GPOSR 0x03 +#define TG_GPODR1 0x04 +#define TG_GPODR2 0x05 +#define TG_PINICTL 0x06 +#define TG_HPOSCTL 0x07 + +/* + * LED + */ +#define TOSA_SCOOP_LED_BLUE TOSA_SCOOP_GPCR_PA11 +#define TOSA_SCOOP_LED_GREEN TOSA_SCOOP_GPCR_PA12 +#define TOSA_SCOOP_LED_ORANGE TOSA_SCOOP_GPCR_PA13 +#define TOSA_SCOOP_LED_WLAN TOSA_SCOOP_GPCR_PA18 + + +/* + * PXA GPIOs + */ +#define TOSA_GPIO_POWERON (0) +#define TOSA_GPIO_RESET (1) +#define TOSA_GPIO_AC_IN (2) +#define TOSA_GPIO_RECORD_BTN (3) +#define TOSA_GPIO_SYNC (4) /* Cradle SYNC Button */ +#define TOSA_GPIO_USB_IN (5) +#define TOSA_GPIO_JACKET_DETECT (7) +#define TOSA_GPIO_nSD_DETECT (9) +#define TOSA_GPIO_nSD_INT (10) +#define TOSA_GPIO_TC6393_CLK (11) +#define TOSA_GPIO_BAT1_CRG (12) +#define TOSA_GPIO_CF_CD (13) +#define TOSA_GPIO_BAT0_CRG (14) +#define TOSA_GPIO_TC6393_INT (15) +#define TOSA_GPIO_BAT0_LOW (17) +#define TOSA_GPIO_TC6393_RDY (18) +#define TOSA_GPIO_ON_RESET (19) +#define TOSA_GPIO_EAR_IN (20) +#define TOSA_GPIO_CF_IRQ (21) /* CF slot0 Ready */ +#define TOSA_GPIO_ON_KEY (22) +#define TOSA_GPIO_VGA_LINE (27) +#define TOSA_GPIO_TP_INT (32) /* Touch Panel pen down interrupt */ +#define TOSA_GPIO_JC_CF_IRQ (36) /* CF slot1 Ready */ +#define TOSA_GPIO_BAT_LOCKED (38) /* Battery locked */ +#define TOSA_GPIO_TG_SPI_SCLK (81) +#define TOSA_GPIO_TG_SPI_CS (82) +#define TOSA_GPIO_TG_SPI_MOSI (83) +#define TOSA_GPIO_BAT1_LOW (84) + +#define TOSA_GPIO_HP_IN GPIO_EAR_IN + +#define TOSA_GPIO_MAIN_BAT_LOW GPIO_BAT0_LOW + +#define TOSA_KEY_STROBE_NUM (11) +#define TOSA_KEY_SENSE_NUM (7) + +#define TOSA_GPIO_HIGH_STROBE_BIT (0xfc000000) +#define TOSA_GPIO_LOW_STROBE_BIT (0x0000001f) +#define TOSA_GPIO_ALL_SENSE_BIT (0x00000fe0) +#define TOSA_GPIO_ALL_SENSE_RSHIFT (5) +#define TOSA_GPIO_STROBE_BIT(a) GPIO_bit(58+(a)) +#define TOSA_GPIO_SENSE_BIT(a) GPIO_bit(69+(a)) +#define TOSA_GAFR_HIGH_STROBE_BIT (0xfff00000) +#define TOSA_GAFR_LOW_STROBE_BIT (0x000003ff) +#define TOSA_GAFR_ALL_SENSE_BIT (0x00fffc00) +#define TOSA_GPIO_KEY_SENSE(a) (69+(a)) +#define TOSA_GPIO_KEY_STROBE(a) (58+(a)) + +/* + * Interrupts + */ +#define TOSA_IRQ_GPIO_WAKEUP IRQ_GPIO(TOSA_GPIO_WAKEUP) +#define TOSA_IRQ_GPIO_AC_IN IRQ_GPIO(TOSA_GPIO_AC_IN) +#define TOSA_IRQ_GPIO_RECORD_BTN IRQ_GPIO(TOSA_GPIO_RECORD_BTN) +#define TOSA_IRQ_GPIO_SYNC IRQ_GPIO(TOSA_GPIO_SYNC) +#define TOSA_IRQ_GPIO_USB_IN IRQ_GPIO(TOSA_GPIO_USB_IN) +#define TOSA_IRQ_GPIO_JACKET_DETECT IRQ_GPIO(TOSA_GPIO_JACKET_DETECT) +#define TOSA_IRQ_GPIO_nSD_INT IRQ_GPIO(TOSA_GPIO_nSD_INT) +#define TOSA_IRQ_GPIO_nSD_DETECT IRQ_GPIO(TOSA_GPIO_nSD_DETECT) +#define TOSA_IRQ_GPIO_BAT1_CRG IRQ_GPIO(TOSA_GPIO_BAT1_CRG) +#define TOSA_IRQ_GPIO_CF_CD IRQ_GPIO(TOSA_GPIO_CF_CD) +#define TOSA_IRQ_GPIO_BAT0_CRG IRQ_GPIO(TOSA_GPIO_BAT0_CRG) +#define TOSA_IRQ_GPIO_TC6393_INT IRQ_GPIO(TOSA_GPIO_TC6393_INT) +#define TOSA_IRQ_GPIO_BAT0_LOW IRQ_GPIO(TOSA_GPIO_BAT0_LOW) +#define TOSA_IRQ_GPIO_EAR_IN IRQ_GPIO(TOSA_GPIO_EAR_IN) +#define TOSA_IRQ_GPIO_CF_IRQ IRQ_GPIO(TOSA_GPIO_CF_IRQ) +#define TOSA_IRQ_GPIO_ON_KEY IRQ_GPIO(TOSA_GPIO_ON_KEY) +#define TOSA_IRQ_GPIO_VGA_LINE IRQ_GPIO(TOSA_GPIO_VGA_LINE) +#define TOSA_IRQ_GPIO_TP_INT IRQ_GPIO(TOSA_GPIO_TP_INT) +#define TOSA_IRQ_GPIO_JC_CF_IRQ IRQ_GPIO(TOSA_GPIO_JC_CF_IRQ) +#define TOSA_IRQ_GPIO_BAT_LOCKED IRQ_GPIO(TOSA_GPIO_BAT_LOCKED) +#define TOSA_IRQ_GPIO_BAT1_LOW IRQ_GPIO(TOSA_GPIO_BAT1_LOW) +#define TOSA_IRQ_GPIO_KEY_SENSE(a) IRQ_GPIO(69+(a)) + +#define TOSA_IRQ_GPIO_MAIN_BAT_LOW IRQ_GPIO(TOSA_GPIO_MAIN_BAT_LOW) + +extern struct platform_device tosascoop_jc_device; +extern struct platform_device tosascoop_device; +#endif /* _ASM_ARCH_TOSA_H_ */ |
