diff options
44 files changed, 1314 insertions, 371 deletions
diff --git a/Documentation/devicetree/bindings/arm/armada-370-xp-timer.txt b/Documentation/devicetree/bindings/timer/marvell,armada-370-xp-timer.txt index 6483011..3638112 100644 --- a/Documentation/devicetree/bindings/arm/armada-370-xp-timer.txt +++ b/Documentation/devicetree/bindings/timer/marvell,armada-370-xp-timer.txt @@ -1,10 +1,13 @@ -Marvell Armada 370 and Armada XP Global Timers ----------------------------------------------- +Marvell Armada 370 and Armada XP Timers +--------------------------------------- Required properties: - compatible: Should be "marvell,armada-370-xp-timer" -- interrupts: Should contain the list of Global Timer interrupts -- reg: Should contain the base address of the Global Timer registers +- interrupts: Should contain the list of Global Timer interrupts and + then local timer interrupts +- reg: Should contain location and length for timers register. First + pair for the Global Timer registers, second pair for the + local/private timers. - clocks: clock driving the timer hardware Optional properties: diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index e007134..9c62558 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -56,6 +56,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \ kirkwood-dockstar.dtb \ kirkwood-dreamplug.dtb \ kirkwood-goflexnet.dtb \ + kirkwood-guruplug-server-plus.dtb \ kirkwood-ib62x0.dtb \ kirkwood-iconnect.dtb \ kirkwood-iomega_ix2_200.dtb \ @@ -78,7 +79,9 @@ dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \ msm8960-cdp.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \ armada-370-mirabox.dtb \ + armada-370-rd.dtb \ armada-xp-db.dtb \ + armada-xp-gp.dtb \ armada-xp-openblocks-ax3-4.dtb dtb-$(CONFIG_ARCH_MXC) += \ imx25-karo-tx25.dtb \ diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index 9b82fac..e34b280 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -59,5 +59,40 @@ phy = <&phy1>; phy-mode = "rgmii-id"; }; + + mvsdio@d00d4000 { + pinctrl-0 = <&sdio_pins1>; + pinctrl-names = "default"; + /* + * This device is disabled by default, because + * using the SD card connector requires + * changing the default CON40 connector + * "DB-88F6710_MPP_2xRGMII_DEVICE_Jumper" to a + * different connector + * "DB-88F6710_MPP_RGMII_SD_Jumper". + */ + status = "disabled"; + /* No CD or WP GPIOs */ + }; + + usb@d0050000 { + status = "okay"; + }; + + usb@d0051000 { + status = "okay"; + }; + + spi0: spi@d0010600 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l25635e"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <50000000>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts index 3b40713..dd0c57d 100644 --- a/arch/arm/boot/dts/armada-370-mirabox.dts +++ b/arch/arm/boot/dts/armada-370-mirabox.dts @@ -52,5 +52,23 @@ phy = <&phy1>; phy-mode = "rgmii-id"; }; + + mvsdio@d00d4000 { + pinctrl-0 = <&sdio_pins2>; + pinctrl-names = "default"; + status = "okay"; + /* + * No CD or WP GPIOs: SDIO interface used for + * Wifi/Bluetooth chip + */ + }; + + usb@d0050000 { + status = "okay"; + }; + + usb@d0051000 { + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts new file mode 100644 index 0000000..f8e4855 --- /dev/null +++ b/arch/arm/boot/dts/armada-370-rd.dts @@ -0,0 +1,68 @@ +/* + * Device Tree file for Marvell Armada 370 Reference Design board + * (RD-88F6710-A1) + * + * Copied from arch/arm/boot/dts/armada-370-db.dts + * + * Copyright (C) 2013 Florian Fainelli <florian@openwrt.org> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; +/include/ "armada-370.dtsi" + +/ { + model = "Marvell Armada 370 Reference Design"; + compatible = "marvell,a370-rd", "marvell,armada370", "marvell,armada-370-xp"; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; /* 512 MB */ + }; + + soc { + serial@d0012000 { + clock-frequency = <200000000>; + status = "okay"; + }; + sata@d00a0000 { + nr-ports = <2>; + status = "okay"; + }; + + mdio { + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + + ethernet@d0070000 { + status = "okay"; + phy = <&phy0>; + phy-mode = "sgmii"; + }; + ethernet@d0074000 { + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii-id"; + }; + + mvsdio@d00d4000 { + pinctrl-0 = <&sdio_pins1>; + pinctrl-names = "default"; + status = "okay"; + /* No CD or WP GPIOs */ + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 5b29225..6f1acc7 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -68,8 +68,9 @@ timer@d0020300 { compatible = "marvell,armada-370-xp-timer"; - reg = <0xd0020300 0x30>; - interrupts = <37>, <38>, <39>, <40>; + reg = <0xd0020300 0x30>, + <0xd0021040 0x30>; + interrupts = <37>, <38>, <39>, <40>, <5>, <6>; clocks = <&coreclk 2>; }; @@ -137,6 +138,50 @@ reg = <0xd0010300 0x20>; interrupts = <50>; }; + + mvsdio@d00d4000 { + compatible = "marvell,orion-sdio"; + reg = <0xd00d4000 0x200>; + interrupts = <54>; + clocks = <&gateclk 17>; + status = "disabled"; + }; + + usb@d0050000 { + compatible = "marvell,orion-ehci"; + reg = <0xd0050000 0x500>; + interrupts = <45>; + status = "disabled"; + }; + + usb@d0051000 { + compatible = "marvell,orion-ehci"; + reg = <0xd0051000 0x500>; + interrupts = <46>; + status = "disabled"; + }; + + spi0: spi@d0010600 { + compatible = "marvell,orion-spi"; + reg = <0xd0010600 0x28>; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + interrupts = <30>; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + spi1: spi@d0010680 { + compatible = "marvell,orion-spi"; + reg = <0xd0010680 0x28>; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + interrupts = <92>; + clocks = <&coreclk 0>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index 636cf7d..8188d13 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -47,6 +47,18 @@ pinctrl { compatible = "marvell,mv88f6710-pinctrl"; reg = <0xd0018000 0x38>; + + sdio_pins1: sdio-pins1 { + marvell,pins = "mpp9", "mpp11", "mpp12", + "mpp13", "mpp14", "mpp15"; + marvell,function = "sd0"; + }; + + sdio_pins2: sdio-pins2 { + marvell,pins = "mpp47", "mpp48", "mpp49", + "mpp50", "mpp51", "mpp52"; + marvell,function = "sd0"; + }; }; gpio0: gpio@d0018100 { @@ -132,5 +144,14 @@ dmacap,memset; }; }; + + usb@d0050000 { + clocks = <&coreclk 0>; + }; + + usb@d0051000 { + clocks = <&coreclk 0>; + }; + }; }; diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts index 8e53b25..e83505e 100644 --- a/arch/arm/boot/dts/armada-xp-db.dts +++ b/arch/arm/boot/dts/armada-xp-db.dts @@ -90,5 +90,36 @@ phy = <&phy3>; phy-mode = "sgmii"; }; + + mvsdio@d00d4000 { + pinctrl-0 = <&sdio_pins>; + pinctrl-names = "default"; + status = "okay"; + /* No CD or WP GPIOs */ + }; + + usb@d0050000 { + status = "okay"; + }; + + usb@d0051000 { + status = "okay"; + }; + + usb@d0052000 { + status = "okay"; + }; + + spi0: spi@d0010600 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p64"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <20000000>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts new file mode 100644 index 0000000..1c8afe2 --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-gp.dts @@ -0,0 +1,113 @@ +/* + * Device Tree file for Marvell Armada XP development board + * (DB-MV784MP-GP) + * + * Copyright (C) 2013 Marvell + * + * Lior Amsalem <alior@marvell.com> + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; +/include/ "armada-xp-mv78460.dtsi" + +/ { + model = "Marvell Armada XP Development Board DB-MV784MP-GP"; + compatible = "marvell,axp-gp", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp"; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + }; + + memory { + device_type = "memory"; + + /* + * 4 GB of plug-in RAM modules by default but only 3GB + * are visible, the amount of memory available can be + * changed by the bootloader according the size of the + * module actually plugged + */ + reg = <0x00000000 0xC0000000>; + }; + + soc { + serial@d0012000 { + clock-frequency = <250000000>; + status = "okay"; + }; + serial@d0012100 { + clock-frequency = <250000000>; + status = "okay"; + }; + serial@d0012200 { + clock-frequency = <250000000>; + status = "okay"; + }; + serial@d0012300 { + clock-frequency = <250000000>; + status = "okay"; + }; + + sata@d00a0000 { + nr-ports = <2>; + status = "okay"; + }; + + mdio { + phy0: ethernet-phy@0 { + reg = <16>; + }; + + phy1: ethernet-phy@1 { + reg = <17>; + }; + + phy2: ethernet-phy@2 { + reg = <18>; + }; + + phy3: ethernet-phy@3 { + reg = <19>; + }; + }; + + ethernet@d0070000 { + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; + }; + ethernet@d0074000 { + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii-id"; + }; + ethernet@d0030000 { + status = "okay"; + phy = <&phy2>; + phy-mode = "rgmii-id"; + }; + ethernet@d0034000 { + status = "okay"; + phy = <&phy3>; + phy-mode = "rgmii-id"; + }; + + spi0: spi@d0010600 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "n25q128a13"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <108000000>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi index e041f42..f56c405 100644 --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -47,6 +47,12 @@ pinctrl { compatible = "marvell,mv78230-pinctrl"; reg = <0xd0018000 0x38>; + + sdio_pins: sdio-pins { + marvell,pins = "mpp30", "mpp31", "mpp32", + "mpp33", "mpp34", "mpp35"; + marvell,function = "sd0"; + }; }; gpio0: gpio@d0018100 { diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index 9e23bd8..f8f2b78 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -48,6 +48,12 @@ pinctrl { compatible = "marvell,mv78260-pinctrl"; reg = <0xd0018000 0x38>; + + sdio_pins: sdio-pins { + marvell,pins = "mpp30", "mpp31", "mpp32", + "mpp33", "mpp34", "mpp35"; + marvell,function = "sd0"; + }; }; gpio0: gpio@d0018100 { diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi index 9659661..936c25d 100644 --- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi @@ -63,6 +63,12 @@ pinctrl { compatible = "marvell,mv78460-pinctrl"; reg = <0xd0018000 0x38>; + + sdio_pins: sdio-pins { + marvell,pins = "mpp30", "mpp31", "mpp32", + "mpp33", "mpp34", "mpp35"; + marvell,function = "sd0"; + }; }; gpio0: gpio@d0018100 { diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts index b42652f..3818a82 100644 --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts @@ -66,6 +66,18 @@ }; }; + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + label = "Init Button"; + linux,code = <116>; + gpios = <&gpio1 28 0>; + }; + }; + mdio { phy0: ethernet-phy@0 { reg = <0>; @@ -121,5 +133,11 @@ nr-ports = <2>; status = "okay"; }; + usb@d0050000 { + status = "okay"; + }; + usb@d0051000 { + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index 2e37ef1..1443949 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -30,7 +30,7 @@ }; mpic: interrupt-controller@d0020000 { - reg = <0xd0020a00 0x1d0>, + reg = <0xd0020a00 0x2d0>, <0xd0021070 0x58>; }; @@ -134,5 +134,22 @@ dmacap,memset; }; }; + + usb@d0050000 { + clocks = <&gateclk 18>; + }; + + usb@d0051000 { + clocks = <&gateclk 19>; + }; + + usb@d0052000 { + compatible = "marvell,orion-ehci"; + reg = <0xd0052000 0x500>; + interrupts = <47>; + clocks = <&gateclk 20>; + status = "disabled"; + }; + }; }; diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts index cdee96f..7e3065a 100644 --- a/arch/arm/boot/dts/dove-cubox.dts +++ b/arch/arm/boot/dts/dove-cubox.dts @@ -17,12 +17,33 @@ leds { compatible = "gpio-leds"; + pinctrl-0 = <&pmx_gpio_18>; + pinctrl-names = "default"; + power { label = "Power"; gpios = <&gpio0 18 1>; linux,default-trigger = "default-on"; }; }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + usb_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "USB Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 1 0>; + }; + }; }; &uart0 { status = "okay"; }; @@ -47,9 +68,14 @@ }; &pinctrl { - pinctrl-0 = <&pmx_gpio_12 &pmx_gpio_18>; + pinctrl-0 = <&pmx_gpio_1 &pmx_gpio_12>; pinctrl-names = "default"; + pmx_gpio_1: pmx-gpio-1 { + marvell,pins = "mpp1"; + marvell,function = "gpio"; + }; + pmx_gpio_12: pmx-gpio-12 { marvell,pins = "mpp12"; marvell,function = "gpio"; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 740630f..67dbe20 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -55,7 +55,7 @@ reg = <0x12000 0x100>; reg-shift = <2>; interrupts = <7>; - clock-frequency = <166666667>; + clocks = <&core_clk 0>; status = "disabled"; }; @@ -64,7 +64,7 @@ reg = <0x12100 0x100>; reg-shift = <2>; interrupts = <8>; - clock-frequency = <166666667>; + clocks = <&core_clk 0>; status = "disabled"; }; @@ -73,7 +73,7 @@ reg = <0x12000 0x100>; reg-shift = <2>; interrupts = <9>; - clock-frequency = <166666667>; + clocks = <&core_clk 0>; status = "disabled"; }; @@ -82,7 +82,7 @@ reg = <0x12100 0x100>; reg-shift = <2>; interrupts = <10>; - clock-frequency = <166666667>; + clocks = <&core_clk 0>; status = "disabled"; }; @@ -156,6 +156,22 @@ status = "disabled"; }; + ehci0: usb-host@50000 { + compatible = "marvell,orion-ehci"; + reg = <0x50000 0x1000>; + interrupts = <24>; + clocks = <&gate_clk 0>; + status = "okay"; + }; + + ehci1: usb-host@51000 { + compatible = "marvell,orion-ehci"; + reg = <0x51000 0x1000>; + interrupts = <25>; + clocks = <&gate_clk 1>; + status = "okay"; + }; + sdio0: sdio@92000 { compatible = "marvell,dove-sdhci"; reg = <0x92000 0x100>; diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi index 4ccea21..192cf76 100644 --- a/arch/arm/boot/dts/kirkwood-6282.dtsi +++ b/arch/arm/boot/dts/kirkwood-6282.dtsi @@ -5,6 +5,12 @@ compatible = "marvell,88f6282-pinctrl"; reg = <0x10000 0x20>; + pmx_nand: pmx-nand { + marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", + "mpp4", "mpp5", "mpp18", "mpp19"; + marvell,function = "nand"; + }; + pmx_sata0: pmx-sata0 { marvell,pins = "mpp5", "mpp21", "mpp23"; marvell,function = "sata0"; @@ -21,6 +27,12 @@ marvell,pins = "mpp8", "mpp9"; marvell,function = "twsi0"; }; + + pmx_twsi1: pmx-twsi1 { + marvell,pins = "mpp36", "mpp37"; + marvell,function = "twsi1"; + }; + pmx_uart0: pmx-uart0 { marvell,pins = "mpp10", "mpp11"; marvell,function = "uart0"; @@ -30,6 +42,11 @@ marvell,pins = "mpp13", "mpp14"; marvell,function = "uart1"; }; + pmx_sdio: pmx-sdio { + marvell,pins = "mpp12", "mpp13", "mpp14", + "mpp15", "mpp16", "mpp17"; + marvell,function = "sdio"; + }; }; i2c@11100 { diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts index f2d386c..ef2d8c7 100644 --- a/arch/arm/boot/dts/kirkwood-dreamplug.dts +++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts @@ -74,6 +74,13 @@ status = "okay"; nr-ports = <1>; }; + + mvsdio@90000 { + pinctrl-0 = <&pmx_sdio>; + pinctrl-names = "default"; + status = "okay"; + /* No CD or WP GPIOs */ + }; }; gpio-leds { diff --git a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts new file mode 100644 index 0000000..9555a86 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts @@ -0,0 +1,94 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" +/include/ "kirkwood-6281.dtsi" + +/ { + model = "Globalscale Technologies Guruplug Server Plus"; + compatible = "globalscale,guruplug-server-plus", "globalscale,guruplug", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_led_health_r &pmx_led_health_g + &pmx_led_wmode_r &pmx_led_wmode_g >; + pinctrl-names = "default"; + + pmx_led_health_r: pmx-led-health-r { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + pmx_led_health_g: pmx-led-health-g { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + pmx_led_wmode_r: pmx-led-wmode-r { + marvell,pins = "mpp48"; + marvell,function = "gpio"; + }; + pmx_led_wmode_g: pmx-led-wmode-g { + marvell,pins = "mpp49"; + marvell,function = "gpio"; + }; + }; + serial@12000 { + clock-frequency = <200000000>; + status = "ok"; + }; + + nand@3000000 { + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x00000000 0x00100000>; + read-only; + }; + + partition@100000 { + label = "uImage"; + reg = <0x00100000 0x00400000>; + }; + + partition@500000 { + label = "data"; + reg = <0x00500000 0x1fb00000>; + }; + }; + + sata@80000 { + status = "okay"; + nr-ports = <1>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + health-r { + label = "guruplug:red:health"; + gpios = <&gpio1 14 1>; + }; + health-g { + label = "guruplug:green:health"; + gpios = <&gpio1 15 1>; + }; + wmode-r { + label = "guruplug:red:wmode"; + gpios = <&gpio1 16 1>; + }; + wmode-g { + label = "guruplug:green:wmode"; + gpios = <&gpio1 17 1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/kirkwood-mplcec4.dts index 262c654..662dfd8 100644 --- a/arch/arm/boot/dts/kirkwood-mplcec4.dts +++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts @@ -20,12 +20,11 @@ pinctrl: pinctrl@10000 { pinctrl-0 = < &pmx_nand &pmx_uart0 - &pmx_led_health &pmx_sdio + &pmx_led_health &pmx_sata0 &pmx_sata1 &pmx_led_user1o &pmx_led_user1g &pmx_led_user0o &pmx_led_user0g &pmx_led_misc - &pmx_sdio_cd >; pinctrl-names = "default"; @@ -133,6 +132,14 @@ status = "okay"; }; + + mvsdio@90000 { + pinctrl-0 = <&pmx_sdio &pmx_sdio_cd>; + pinctrl-names = "default"; + status = "okay"; + cd-gpios = <&gpio1 15 0>; + /* No WP GPIO */ + }; }; gpio-leds { diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi index 77d21ab..e8e7ece 100644 --- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi @@ -76,4 +76,10 @@ gpios = <&gpio0 12 0>; }; }; + + gpio_poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio0 31 0>; + }; + }; diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/kirkwood-nsa310.dts index 5509f96..3a178cf 100644 --- a/arch/arm/boot/dts/kirkwood-nsa310.dts +++ b/arch/arm/boot/dts/kirkwood-nsa310.dts @@ -16,6 +16,105 @@ }; ocp@f1000000 { + pinctrl: pinctrl@10000 { + pinctrl-0 = < &pmx_led_esata_green + &pmx_led_esata_red + &pmx_led_usb_green + &pmx_led_usb_red + &pmx_usb_power_off + &pmx_led_sys_green + &pmx_led_sys_red + &pmx_btn_reset + &pmx_btn_copy + &pmx_led_copy_green + &pmx_led_copy_red + &pmx_led_hdd_green + &pmx_led_hdd_red + &pmx_unknown + &pmx_btn_power + &pmx_pwr_off >; + pinctrl-names = "default"; + + pmx_led_esata_green: pmx-led-esata-green { + marvell,pins = "mpp12"; + marvell,function = "gpio"; + }; + + pmx_led_esata_red: pmx-led-esata-red { + marvell,pins = "mpp13"; + marvell,function = "gpio"; + }; + + pmx_led_usb_green: pmx-led-usb-green { + marvell,pins = "mpp15"; + marvell,function = "gpio"; + }; + + pmx_led_usb_red: pmx-led-usb-red { + marvell,pins = "mpp16"; + marvell,function = "gpio"; + }; + + pmx_usb_power_off: pmx-usb-power-off { + marvell,pins = "mpp21"; + marvell,function = "gpio"; + }; + + pmx_led_sys_green: pmx-led-sys-green { + marvell,pins = "mpp28"; + marvell,function = "gpio"; + }; + + pmx_led_sys_red: pmx-led-sys-red { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + + pmx_btn_reset: pmx-btn-reset { + marvell,pins = "mpp36"; + marvell,function = "gpio"; + }; + + pmx_btn_copy: pmx-btn-copy { + marvell,pins = "mpp37"; + marvell,function = "gpio"; + }; + + pmx_led_copy_green: pmx-led-copy-green { + marvell,pins = "mpp39"; + marvell,function = "gpio"; + }; + + pmx_led_copy_red: pmx-led-copy-red { + marvell,pins = "mpp40"; + marvell,function = "gpio"; + }; + + pmx_led_hdd_green: pmx-led-hdd-green { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + + pmx_led_hdd_red: pmx-led-hdd-red { + marvell,pins = "mpp42"; + marvell,function = "gpio"; + }; + + pmx_unknown: pmx-unknown { + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + + pmx_btn_power: pmx-btn-power { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + + pmx_pwr_off: pmx-pwr-off { + marvell,pins = "mpp48"; + marvell,function = "gpio"; + }; + }; serial@12000 { clock-frequency = <200000000>; @@ -29,6 +128,11 @@ i2c@11000 { status = "okay"; + + adt7476: adt7476a@2e { + compatible = "adt7476"; + reg = <0x2e>; + }; }; nand@3000000 { @@ -141,4 +245,26 @@ gpios = <&gpio1 8 0>; }; }; + + gpio_poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio1 16 0>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + usb0_power_off: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "USB Power Off"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 21 0>; + }; + }; }; diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts index 49d3d74..ede7fe0d 100644 --- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts +++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts @@ -75,6 +75,122 @@ reg = <0x30>; }; }; + + pinctrl: pinctrl@10000 { + pinctrl-0 = < &pmx_nand &pmx_uart0 + &pmx_uart1 &pmx_twsi1 + &pmx_dip_sw0 &pmx_dip_sw1 + &pmx_dip_sw2 &pmx_dip_sw3 + &pmx_gpio_0 &pmx_gpio_1 + &pmx_gpio_2 &pmx_gpio_3 + &pmx_gpio_4 &pmx_gpio_5 + &pmx_gpio_6 &pmx_gpio_7 + &pmx_led_red &pmx_led_green + &pmx_led_yellow >; + pinctrl-names = "default"; + + pmx_uart0: pmx-uart0 { + marvell,pins = "mpp10", "mpp11", "mpp15", + "mpp16"; + marvell,function = "uart0"; + }; + + pmx_uart1: pmx-uart1 { + marvell,pins = "mpp13", "mpp14", "mpp8", + "mpp9"; + marvell,function = "uart1"; + }; + + pmx_sysrst: pmx-sysrst { + marvell,pins = "mpp6"; + marvell,function = "sysrst"; + }; + + pmx_dip_sw0: pmx-dip-sw0 { + marvell,pins = "mpp20"; + marvell,function = "gpio"; + }; + + pmx_dip_sw1: pmx-dip-sw1 { + marvell,pins = "mpp21"; + marvell,function = "gpio"; + }; + + pmx_dip_sw2: pmx-dip-sw2 { + marvell,pins = "mpp22"; + marvell,function = "gpio"; + }; + + pmx_dip_sw3: pmx-dip-sw3 { + marvell,pins = "mpp23"; + marvell,function = "gpio"; + }; + + pmx_gpio_0: pmx-gpio-0 { + marvell,pins = "mpp24"; + marvell,function = "gpio"; + }; + + pmx_gpio_1: pmx-gpio-1 { + marvell,pins = "mpp25"; + marvell,function = "gpio"; + }; + + pmx_gpio_2: pmx-gpio-2 { + marvell,pins = "mpp26"; + marvell,function = "gpio"; + }; + + pmx_gpio_3: pmx-gpio-3 { + marvell,pins = "mpp27"; + marvell,function = "gpio"; + }; + + pmx_gpio_4: pmx-gpio-4 { + marvell,pins = "mpp28"; + marvell,function = "gpio"; + }; + + pmx_gpio_5: pmx-gpio-5 { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + + pmx_gpio_6: pmx-gpio-6 { + marvell,pins = "mpp30"; + marvell,function = "gpio"; + }; + + pmx_gpio_7: pmx-gpio-7 { + marvell,pins = "mpp31"; + marvell,function = "gpio"; + }; + + pmx_gpio_init: pmx-init { + marvell,pins = "mpp38"; + marvell,function = "gpio"; + }; + + pmx_usb_oc: pmx-usb-oc { + marvell,pins = "mpp39"; + marvell,function = "gpio"; + }; + + pmx_led_red: pmx-led-red { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + + pmx_led_green: pmx-led-green { + marvell,pins = "mpp42"; + marvell,function = "gpio"; + }; + + pmx_led_yellow: pmx-led-yellow { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + }; }; gpio-leds { diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts index cd15452..842ff95 100644 --- a/arch/arm/boot/dts/kirkwood-topkick.dts +++ b/arch/arm/boot/dts/kirkwood-topkick.dts @@ -1,6 +1,7 @@ /dts-v1/; /include/ "kirkwood.dtsi" +/include/ "kirkwood-6282.dtsi" / { model = "Univeral Scientific Industrial Co. Topkick-1281P2"; @@ -16,6 +17,96 @@ }; ocp@f1000000 { + pinctrl: pinctrl@10000 { + /* + * GPIO LED layout + * + * /-SYS_LED(2) + * | + * | /-DISK_LED + * | | + * | | /-WLAN_LED(2) + * | | | + * [SW] [*] [*] [*] + */ + + /* + * Switch positions + * + * /-SW_LEFT(2) + * | + * | /-SW_IDLE + * | | + * | | /-SW_RIGHT + * | | | + * PS [L] [I] [R] LEDS + */ + pinctrl-0 = < &pmx_led_disk_yellow + &pmx_sata0_pwr_enable + &pmx_led_sys_red + &pmx_led_sys_blue + &pmx_led_wifi_green + &pmx_sw_left + &pmx_sw_right + &pmx_sw_idle + &pmx_sw_left2 + &pmx_led_wifi_yellow + &pmx_uart0 + &pmx_nand + &pmx_twsi0 >; + pinctrl-names = "default"; + + pmx_led_disk_yellow: pmx-led-disk-yellow { + marvell,pins = "mpp21"; + marvell,function = "gpio"; + }; + + pmx_sata0_pwr_enable: pmx-sata0-pwr-enable { + marvell,pins = "mpp36"; + marvell,function = "gpio"; + }; + + pmx_led_sys_red: pmx-led-sys-red { + marvell,pins = "mpp37"; + marvell,function = "gpio"; + }; + + pmx_led_sys_blue: pmx-led-sys-blue { + marvell,pins = "mpp38"; + marvell,function = "gpio"; + }; + + pmx_led_wifi_green: pmx-led-wifi-green { + marvell,pins = "mpp39"; + marvell,function = "gpio"; + }; + + pmx_sw_left: pmx-sw-left { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + + pmx_sw_right: pmx-sw-right { + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + + pmx_sw_idle: pmx-sw-idle { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + + pmx_sw_left2: pmx-sw-left2 { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + + pmx_led_wifi_yellow: pmx-led-wifi-yellow { + marvell,pins = "mpp48"; + marvell,function = "gpio"; + }; + }; + serial@12000 { clock-frequency = <200000000>; status = "ok"; @@ -54,6 +145,17 @@ status = "okay"; nr-ports = <1>; }; + + i2c@11000 { + status = "ok"; + }; + + mvsdio@90000 { + pinctrl-0 = <&pmx_sdio>; + pinctrl-names = "default"; + status = "okay"; + /* No CD or WP GPIOs */ + }; }; gpio-leds { diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index d6ab442..2c738d9 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -193,5 +193,13 @@ clocks = <&gate_clk 17>; status = "okay"; }; + + mvsdio@90000 { + compatible = "marvell,orion-sdio"; + reg = <0x90000 0x200>; + interrupts = <28>; + clocks = <&gate_clk 4>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/configs/dove_defconfig b/arch/arm/configs/dove_defconfig index 0b7ee92..3fe8dae 100644 --- a/arch/arm/configs/dove_defconfig +++ b/arch/arm/configs/dove_defconfig @@ -1,26 +1,24 @@ CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_EXPERT=y CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y CONFIG_ARCH_DOVE=y CONFIG_MACH_DOVE_DB=y CONFIG_MACH_CM_A510=y CONFIG_MACH_DOVE_DT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y CONFIG_AEABI=y +CONFIG_HIGHMEM=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_HIGHMEM=y -CONFIG_USE_OF=y -CONFIG_ATAGS=y CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y -CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y CONFIG_VFP=y CONFIG_NET=y CONFIG_PACKET=y @@ -32,8 +30,9 @@ CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y # CONFIG_IPV6 is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y @@ -57,7 +56,6 @@ CONFIG_ATA=y CONFIG_SATA_MV=y CONFIG_NETDEVICES=y CONFIG_MV643XX_ETH=y -# CONFIG_NETDEV_10000 is not set CONFIG_INPUT_POLLDEV=y # CONFIG_INPUT_MOUSEDEV is not set CONFIG_INPUT_EVDEV=y @@ -68,10 +66,7 @@ CONFIG_LEGACY_PTY_COUNT=16 # CONFIG_DEVKMEM is not set CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_SERIAL_8250_PCI is not set CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_HW_RANDOM is not set CONFIG_I2C=y @@ -81,13 +76,11 @@ CONFIG_SPI=y CONFIG_SPI_ORION=y # CONFIG_HWMON is not set CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_STORAGE=y CONFIG_MMC=y CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_IO_ACCESSORS=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_DOVE=y CONFIG_NEW_LEDS=y @@ -104,6 +97,7 @@ CONFIG_MV_XOR=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_UDF_FS=m @@ -112,24 +106,20 @@ CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_JFFS2_FS=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_2=y CONFIG_NLS_UTF8=y +CONFIG_PRINTK_TIME=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y # CONFIG_SCHED_DEBUG is not set CONFIG_TIMER_STATS=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y CONFIG_CRYPTO_NULL=y CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_PCBC=m @@ -138,7 +128,6 @@ CONFIG_CRYPTO_MD4=y CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y -CONFIG_CRYPTO_AES=y CONFIG_CRYPTO_BLOWFISH=y CONFIG_CRYPTO_TEA=y CONFIG_CRYPTO_TWOFISH=y @@ -147,5 +136,4 @@ CONFIG_CRYPTO_LZO=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_DEV_MV_CESA=y CONFIG_CRC_CCITT=y -CONFIG_CRC16=y CONFIG_LIBCRC32C=y diff --git a/arch/arm/configs/mvebu_defconfig b/arch/arm/configs/mvebu_defconfig index cbd91bc..2ec8119 100644 --- a/arch/arm/configs/mvebu_defconfig +++ b/arch/arm/configs/mvebu_defconfig @@ -14,16 +14,20 @@ CONFIG_MACH_ARMADA_XP=y # CONFIG_CACHE_L2X0 is not set # CONFIG_SWP_EMULATE is not set CONFIG_SMP=y -# CONFIG_LOCAL_TIMERS is not set CONFIG_AEABI=y CONFIG_HIGHMEM=y # CONFIG_COMPACTION is not set CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_VFP=y CONFIG_NET=y CONFIG_INET=y +CONFIG_BT=y +CONFIG_BT_MRVL=y +CONFIG_BT_MRVL_SDIO=y +CONFIG_CFG80211=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_BLK_DEV_SD=y CONFIG_ATA=y @@ -31,16 +35,34 @@ CONFIG_SATA_MV=y CONFIG_NETDEVICES=y CONFIG_MVNETA=y CONFIG_MARVELL_PHY=y +CONFIG_MWIFIEX=y +CONFIG_MWIFIEX_SDIO=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_I2C=y +CONFIG_SPI=y +CONFIG_SPI_ORION=y CONFIG_I2C_MV64XXX=y +CONFIG_MTD=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_M25P80=y CONFIG_SERIAL_8250_DW=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y -# CONFIG_USB_SUPPORT is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +CONFIG_MMC=y +CONFIG_MMC_MVSDIO=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=m +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_S35390A=y +CONFIG_RTC_DRV_MV=y CONFIG_DMADEVICES=y CONFIG_MV_XOR=y # CONFIG_IOMMU_SUPPORT is not set diff --git a/arch/arm/mach-dove/Kconfig b/arch/arm/mach-dove/Kconfig index 603c5fd..36469d8 100644 --- a/arch/arm/mach-dove/Kconfig +++ b/arch/arm/mach-dove/Kconfig @@ -2,8 +2,12 @@ if ARCH_DOVE menu "Marvell Dove Implementations" +config DOVE_LEGACY + bool + config MACH_DOVE_DB bool "Marvell DB-MV88AP510 Development Board" + select DOVE_LEGACY select I2C_BOARDINFO help Say 'Y' here if you want your kernel to support the @@ -11,6 +15,7 @@ config MACH_DOVE_DB config MACH_CM_A510 bool "CompuLab CM-A510 Board" + select DOVE_LEGACY help Say 'Y' here if you want your kernel to support the CompuLab CM-A510 Board. @@ -19,6 +24,8 @@ config MACH_DOVE_DT bool "Marvell Dove Flattened Device Tree" select MVEBU_CLK_CORE select MVEBU_CLK_GATING + select REGULATOR + select REGULATOR_FIXED_VOLTAGE select USE_OF help Say 'Y' here if you want your kernel to support the diff --git a/arch/arm/mach-dove/Makefile b/arch/arm/mach-dove/Makefile index 5e683ba..3f0a858 100644 --- a/arch/arm/mach-dove/Makefile +++ b/arch/arm/mach-dove/Makefile @@ -1,4 +1,6 @@ -obj-y += common.o addr-map.o irq.o mpp.o +obj-y += common.o addr-map.o irq.o +obj-$(CONFIG_DOVE_LEGACY) += mpp.o obj-$(CONFIG_PCI) += pcie.o obj-$(CONFIG_MACH_DOVE_DB) += dove-db-setup.o +obj-$(CONFIG_MACH_DOVE_DT) += board-dt.o obj-$(CONFIG_MACH_CM_A510) += cm-a510.o diff --git a/arch/arm/mach-dove/board-dt.c b/arch/arm/mach-dove/board-dt.c new file mode 100644 index 0000000..fbde1dd --- /dev/null +++ b/arch/arm/mach-dove/board-dt.c @@ -0,0 +1,92 @@ +/* + * arch/arm/mach-dove/board-dt.c + * + * Marvell Dove 88AP510 System On Chip FDT Board + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/init.h> +#include <linux/clk-provider.h> +#include <linux/clk/mvebu.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/platform_data/usb-ehci-orion.h> +#include <asm/hardware/cache-tauros2.h> +#include <asm/mach/arch.h> +#include <mach/pm.h> +#include <plat/common.h> +#include <plat/irq.h> +#include "common.h" + +/* + * There are still devices that doesn't even know about DT, + * get clock gates here and add a clock lookup. + */ +static void __init dove_legacy_clk_init(void) +{ + struct device_node *np = of_find_compatible_node(NULL, NULL, + "marvell,dove-gating-clock"); + struct of_phandle_args clkspec; + + clkspec.np = np; + clkspec.args_count = 1; + + clkspec.args[0] = CLOCK_GATING_BIT_GBE; + orion_clkdev_add(NULL, "mv643xx_eth_port.0", + of_clk_get_from_provider(&clkspec)); + + clkspec.args[0] = CLOCK_GATING_BIT_PCIE0; + orion_clkdev_add("0", "pcie", + of_clk_get_from_provider(&clkspec)); + + clkspec.args[0] = CLOCK_GATING_BIT_PCIE1; + orion_clkdev_add("1", "pcie", + of_clk_get_from_provider(&clkspec)); +} + +static void __init dove_of_clk_init(void) +{ + mvebu_clocks_init(); + dove_legacy_clk_init(); +} + +static struct mv643xx_eth_platform_data dove_dt_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR_DEFAULT, +}; + +static void __init dove_dt_init(void) +{ + pr_info("Dove 88AP510 SoC\n"); + +#ifdef CONFIG_CACHE_TAUROS2 + tauros2_init(0); +#endif + dove_setup_cpu_mbus(); + + /* Setup root of clk tree */ + dove_of_clk_init(); + + /* Internal devices not ported to DT yet */ + dove_ge00_init(&dove_dt_ge00_data); + dove_pcie_init(1, 1); + + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); +} + +static const char * const dove_dt_board_compat[] = { + "marvell,dove", + NULL +}; + +DT_MACHINE_START(DOVE_DT, "Marvell Dove (Flattened Device Tree)") + .map_io = dove_map_io, + .init_early = dove_init_early, + .init_irq = orion_dt_init_irq, + .init_time = dove_timer_init, + .init_machine = dove_dt_init, + .restart = dove_restart, + .dt_compat = dove_dt_board_compat, +MACHINE_END diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index ea84c535..c6b3b2b 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -360,88 +360,3 @@ void dove_restart(char mode, const char *cmd) while (1) ; } - -#if defined(CONFIG_MACH_DOVE_DT) -/* - * There are still devices that doesn't even know about DT, - * get clock gates here and add a clock lookup. - */ -static void __init dove_legacy_clk_init(void) -{ - struct device_node *np = of_find_compatible_node(NULL, NULL, - "marvell,dove-gating-clock"); - struct of_phandle_args clkspec; - - clkspec.np = np; - clkspec.args_count = 1; - - clkspec.args[0] = CLOCK_GATING_BIT_USB0; - orion_clkdev_add(NULL, "orion-ehci.0", - of_clk_get_from_provider(&clkspec)); - - clkspec.args[0] = CLOCK_GATING_BIT_USB1; - orion_clkdev_add(NULL, "orion-ehci.1", - of_clk_get_from_provider(&clkspec)); - - clkspec.args[0] = CLOCK_GATING_BIT_GBE; - orion_clkdev_add(NULL, "mv643xx_eth_port.0", - of_clk_get_from_provider(&clkspec)); - - clkspec.args[0] = CLOCK_GATING_BIT_PCIE0; - orion_clkdev_add("0", "pcie", - of_clk_get_from_provider(&clkspec)); - - clkspec.args[0] = CLOCK_GATING_BIT_PCIE1; - orion_clkdev_add("1", "pcie", - of_clk_get_from_provider(&clkspec)); -} - -static void __init dove_of_clk_init(void) -{ - mvebu_clocks_init(); - dove_legacy_clk_init(); -} - -static struct mv643xx_eth_platform_data dove_dt_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR_DEFAULT, -}; - -static void __init dove_dt_init(void) -{ - pr_info("Dove 88AP510 SoC, TCLK = %d MHz.\n", - (dove_tclk + 499999) / 1000000); - -#ifdef CONFIG_CACHE_TAUROS2 - tauros2_init(0); -#endif - dove_setup_cpu_mbus(); - - /* Setup root of clk tree */ - dove_of_clk_init(); - - /* Internal devices not ported to DT yet */ - dove_rtc_init(); - - dove_ge00_init(&dove_dt_ge00_data); - dove_ehci0_init(); - dove_ehci1_init(); - dove_pcie_init(1, 1); - - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -} - -static const char * const dove_dt_board_compat[] = { - "marvell,dove", - NULL -}; - -DT_MACHINE_START(DOVE_DT, "Marvell Dove (Flattened Device Tree)") - .map_io = dove_map_io, - .init_early = dove_init_early, - .init_irq = orion_dt_init_irq, - .init_time = dove_timer_init, - .init_machine = dove_dt_init, - .restart = dove_restart, - .dt_compat = dove_dt_board_compat, -MACHINE_END -#endif diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index f91cdff..7b6a64b 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -58,6 +58,13 @@ config ARCH_KIRKWOOD_DT Say 'Y' here if you want your kernel to support the Marvell Kirkwood using flattened device tree. +config MACH_GURUPLUG_DT + bool "Marvell GuruPlug Reference Board (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + Marvell GuruPlug Reference Board (Flattened Device Tree). + config MACH_DREAMPLUG_DT bool "Marvell DreamPlug (Flattened Device Tree)" select ARCH_KIRKWOOD_DT diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index d665309..4cc4bee 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -21,6 +21,7 @@ obj-$(CONFIG_MACH_T5325) += t5325-setup.o obj-$(CONFIG_ARCH_KIRKWOOD_DT) += board-dt.o obj-$(CONFIG_MACH_DREAMPLUG_DT) += board-dreamplug.o +obj-$(CONFIG_MACH_GURUPLUG_DT) += board-guruplug.o obj-$(CONFIG_MACH_ICONNECT_DT) += board-iconnect.o obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += board-dnskw.o obj-$(CONFIG_MACH_IB62X0_DT) += board-ib62x0.o diff --git a/arch/arm/mach-kirkwood/board-dreamplug.c b/arch/arm/mach-kirkwood/board-dreamplug.c index 08248e2..0903242 100644 --- a/arch/arm/mach-kirkwood/board-dreamplug.c +++ b/arch/arm/mach-kirkwood/board-dreamplug.c @@ -15,7 +15,6 @@ #include <linux/init.h> #include <linux/mv643xx_eth.h> #include <linux/gpio.h> -#include <linux/platform_data/mmc-mvsdio.h> #include "common.h" static struct mv643xx_eth_platform_data dreamplug_ge00_data = { @@ -26,10 +25,6 @@ static struct mv643xx_eth_platform_data dreamplug_ge01_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(1), }; -static struct mvsdio_platform_data dreamplug_mvsdio_data = { - /* unfortunately the CD signal has not been connected */ -}; - void __init dreamplug_init(void) { /* @@ -37,5 +32,4 @@ void __init dreamplug_init(void) */ kirkwood_ge00_init(&dreamplug_ge00_data); kirkwood_ge01_init(&dreamplug_ge01_data); - kirkwood_sdio_init(&dreamplug_mvsdio_data); } diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index 95cc04d..2e73e9d 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -55,10 +55,6 @@ static void __init kirkwood_legacy_clk_init(void) orion_clkdev_add("0", "pcie", of_clk_get_from_provider(&clkspec)); - clkspec.args[0] = CGC_BIT_USB0; - orion_clkdev_add(NULL, "orion-ehci.0", - of_clk_get_from_provider(&clkspec)); - clkspec.args[0] = CGC_BIT_PEX1; orion_clkdev_add("1", "pcie", of_clk_get_from_provider(&clkspec)); @@ -66,11 +62,6 @@ static void __init kirkwood_legacy_clk_init(void) clkspec.args[0] = CGC_BIT_GE1; orion_clkdev_add(NULL, "mv643xx_eth_port.1", of_clk_get_from_provider(&clkspec)); - - clkspec.args[0] = CGC_BIT_SDIO; - orion_clkdev_add(NULL, "mvsdio", - of_clk_get_from_provider(&clkspec)); - } static void __init kirkwood_of_clk_init(void) @@ -107,6 +98,9 @@ static void __init kirkwood_dt_init(void) if (of_machine_is_compatible("globalscale,dreamplug")) dreamplug_init(); + if (of_machine_is_compatible("globalscale,guruplug")) + guruplug_dt_init(); + if (of_machine_is_compatible("dlink,dns-kirkwood")) dnskw_init(); @@ -150,14 +144,12 @@ static void __init kirkwood_dt_init(void) if (of_machine_is_compatible("usi,topkick")) usi_topkick_init(); - if (of_machine_is_compatible("zyxel,nsa310")) - nsa310_init(); - of_platform_populate(NULL, kirkwood_dt_match_table, NULL, NULL); } static const char * const kirkwood_dt_board_compat[] = { "globalscale,dreamplug", + "globalscale,guruplug", "dlink,dns-320", "dlink,dns-325", "iom,iconnect", diff --git a/arch/arm/mach-kirkwood/board-guruplug.c b/arch/arm/mach-kirkwood/board-guruplug.c new file mode 100644 index 0000000..0a0df45 --- /dev/null +++ b/arch/arm/mach-kirkwood/board-guruplug.c @@ -0,0 +1,39 @@ +/* + * arch/arm/mach-kirkwood/board-guruplug.c + * + * Marvell Guruplug Reference Board Init for drivers not converted to + * flattened device tree yet. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mv643xx_eth.h> +#include <linux/gpio.h> +#include <linux/platform_data/mmc-mvsdio.h> +#include "common.h" + +static struct mv643xx_eth_platform_data guruplug_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static struct mv643xx_eth_platform_data guruplug_ge01_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(1), +}; + +static struct mvsdio_platform_data guruplug_mvsdio_data = { + /* unfortunately the CD signal has not been connected */ +}; + +void __init guruplug_dt_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_ge00_init(&guruplug_ge00_data); + kirkwood_ge01_init(&guruplug_ge01_data); + kirkwood_sdio_init(&guruplug_mvsdio_data); +} diff --git a/arch/arm/mach-kirkwood/board-mplcec4.c b/arch/arm/mach-kirkwood/board-mplcec4.c index 3264925..7d6dc66 100644 --- a/arch/arm/mach-kirkwood/board-mplcec4.c +++ b/arch/arm/mach-kirkwood/board-mplcec4.c @@ -12,7 +12,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/mv643xx_eth.h> -#include <linux/platform_data/mmc-mvsdio.h> #include "common.h" static struct mv643xx_eth_platform_data mplcec4_ge00_data = { @@ -23,11 +22,6 @@ static struct mv643xx_eth_platform_data mplcec4_ge01_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(2), }; -static struct mvsdio_platform_data mplcec4_mvsdio_data = { - .gpio_card_detect = 47, /* MPP47 used as SD card detect */ -}; - - void __init mplcec4_init(void) { /* @@ -35,7 +29,6 @@ void __init mplcec4_init(void) */ kirkwood_ge00_init(&mplcec4_ge00_data); kirkwood_ge01_init(&mplcec4_ge01_data); - kirkwood_sdio_init(&mplcec4_mvsdio_data); kirkwood_pcie_init(KW_PCIE0); } diff --git a/arch/arm/mach-kirkwood/board-ns2.c b/arch/arm/mach-kirkwood/board-ns2.c index f4632a8..f2ea3b7 100644 --- a/arch/arm/mach-kirkwood/board-ns2.c +++ b/arch/arm/mach-kirkwood/board-ns2.c @@ -15,7 +15,6 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/mv643xx_eth.h> -#include <linux/gpio.h> #include <linux/of.h> #include "common.h" @@ -23,13 +22,6 @@ static struct mv643xx_eth_platform_data ns2_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(8), }; -#define NS2_GPIO_POWER_OFF 31 - -static void ns2_power_off(void) -{ - gpio_set_value(NS2_GPIO_POWER_OFF, 1); -} - void __init ns2_init(void) { /* @@ -39,10 +31,4 @@ void __init ns2_init(void) of_machine_is_compatible("lacie,netspace_mini_v2")) ns2_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0); kirkwood_ge00_init(&ns2_ge00_data); - - if (gpio_request(NS2_GPIO_POWER_OFF, "power-off") == 0 && - gpio_direction_output(NS2_GPIO_POWER_OFF, 0) == 0) - pm_power_off = ns2_power_off; - else - pr_err("ns2: failed to configure power-off GPIO\n"); } diff --git a/arch/arm/mach-kirkwood/board-nsa310.c b/arch/arm/mach-kirkwood/board-nsa310.c index 970174a..55ade93 100644 --- a/arch/arm/mach-kirkwood/board-nsa310.c +++ b/arch/arm/mach-kirkwood/board-nsa310.c @@ -10,79 +10,9 @@ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/gpio.h> -#include <linux/i2c.h> #include <mach/kirkwood.h> #include <linux/of.h> #include "common.h" -#include "mpp.h" - -#define NSA310_GPIO_USB_POWER_OFF 21 -#define NSA310_GPIO_POWER_OFF 48 - -static unsigned int nsa310_mpp_config[] __initdata = { - MPP12_GPIO, /* led esata green */ - MPP13_GPIO, /* led esata red */ - MPP15_GPIO, /* led usb green */ - MPP16_GPIO, /* led usb red */ - MPP21_GPIO, /* control usb power off */ - MPP28_GPIO, /* led sys green */ - MPP29_GPIO, /* led sys red */ - MPP36_GPIO, /* key reset */ - MPP37_GPIO, /* key copy */ - MPP39_GPIO, /* led copy green */ - MPP40_GPIO, /* led copy red */ - MPP41_GPIO, /* led hdd green */ - MPP42_GPIO, /* led hdd red */ - MPP44_GPIO, /* ?? */ - MPP46_GPIO, /* key power */ - MPP48_GPIO, /* control power off */ - 0 -}; - -static struct i2c_board_info __initdata nsa310_i2c_info[] = { - { I2C_BOARD_INFO("adt7476", 0x2e) }, -}; - -static void nsa310_power_off(void) -{ - gpio_set_value(NSA310_GPIO_POWER_OFF, 1); -} - -static int __init nsa310_gpio_request(unsigned int gpio, unsigned long flags, - const char *label) -{ - int err; - - err = gpio_request_one(gpio, flags, label); - if (err) - pr_err("NSA-310: can't setup GPIO%u (%s), err=%d\n", - gpio, label, err); - - return err; -} - -static void __init nsa310_gpio_init(void) -{ - int err; - - err = nsa310_gpio_request(NSA310_GPIO_POWER_OFF, GPIOF_OUT_INIT_LOW, - "Power Off"); - if (!err) - pm_power_off = nsa310_power_off; - - nsa310_gpio_request(NSA310_GPIO_USB_POWER_OFF, GPIOF_OUT_INIT_LOW, - "USB Power Off"); -} - -void __init nsa310_init(void) -{ - kirkwood_mpp_conf(nsa310_mpp_config); - - nsa310_gpio_init(); - - i2c_register_board_info(0, ARRAY_AND_SIZE(nsa310_i2c_info)); -} static int __init nsa310_pci_init(void) { diff --git a/arch/arm/mach-kirkwood/board-openblocks_a6.c b/arch/arm/mach-kirkwood/board-openblocks_a6.c index 815fc64..b11d8fd 100644 --- a/arch/arm/mach-kirkwood/board-openblocks_a6.c +++ b/arch/arm/mach-kirkwood/board-openblocks_a6.c @@ -11,60 +11,16 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/mv643xx_eth.h> -#include <linux/clk.h> -#include <linux/clk-private.h> #include "common.h" -#include "mpp.h" static struct mv643xx_eth_platform_data openblocks_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(0), }; -static unsigned int openblocks_a6_mpp_config[] __initdata = { - MPP0_NF_IO2, - MPP1_NF_IO3, - MPP2_NF_IO4, - MPP3_NF_IO5, - MPP4_NF_IO6, - MPP5_NF_IO7, - MPP6_SYSRST_OUTn, - MPP8_UART1_RTS, - MPP9_UART1_CTS, - MPP10_UART0_TXD, - MPP11_UART0_RXD, - MPP13_UART1_TXD, - MPP14_UART1_RXD, - MPP15_UART0_RTS, - MPP16_UART0_CTS, - MPP18_NF_IO0, - MPP19_NF_IO1, - MPP20_GPIO, /* DIP SW0 */ - MPP21_GPIO, /* DIP SW1 */ - MPP22_GPIO, /* DIP SW2 */ - MPP23_GPIO, /* DIP SW3 */ - MPP24_GPIO, /* GPIO 0 */ - MPP25_GPIO, /* GPIO 1 */ - MPP26_GPIO, /* GPIO 2 */ - MPP27_GPIO, /* GPIO 3 */ - MPP28_GPIO, /* GPIO 4 */ - MPP29_GPIO, /* GPIO 5 */ - MPP30_GPIO, /* GPIO 6 */ - MPP31_GPIO, /* GPIO 7 */ - MPP36_TW1_SDA, - MPP37_TW1_SCK, - MPP38_GPIO, /* INIT */ - MPP39_GPIO, /* USB OC */ - MPP41_GPIO, /* LED: Red */ - MPP42_GPIO, /* LED: Green */ - MPP43_GPIO, /* LED: Yellow */ - 0, -}; - void __init openblocks_a6_init(void) { /* * Basic setup. Needs to be called early. */ - kirkwood_mpp_conf(openblocks_a6_mpp_config); kirkwood_ge00_init(&openblocks_ge00_data); } diff --git a/arch/arm/mach-kirkwood/board-usi_topkick.c b/arch/arm/mach-kirkwood/board-usi_topkick.c index 23d2dd1..1cc04ec 100644 --- a/arch/arm/mach-kirkwood/board-usi_topkick.c +++ b/arch/arm/mach-kirkwood/board-usi_topkick.c @@ -14,64 +14,16 @@ #include <linux/init.h> #include <linux/mv643xx_eth.h> #include <linux/gpio.h> -#include <linux/platform_data/mmc-mvsdio.h> #include "common.h" -#include "mpp.h" static struct mv643xx_eth_platform_data topkick_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(0), }; -static struct mvsdio_platform_data topkick_mvsdio_data = { - /* unfortunately the CD signal has not been connected */ -}; - -/* - * GPIO LED layout - * - * /-SYS_LED(2) - * | - * | /-DISK_LED - * | | - * | | /-WLAN_LED(2) - * | | | - * [SW] [*] [*] [*] - */ - -/* - * Switch positions - * - * /-SW_LEFT - * | - * | /-SW_IDLE - * | | - * | | /-SW_RIGHT - * | | | - * PS [L] [I] [R] LEDS - */ - -static unsigned int topkick_mpp_config[] __initdata = { - MPP21_GPIO, /* DISK_LED (low active) - yellow */ - MPP36_GPIO, /* SATA0 power enable (high active) */ - MPP37_GPIO, /* SYS_LED2 (low active) - red */ - MPP38_GPIO, /* SYS_LED (low active) - blue */ - MPP39_GPIO, /* WLAN_LED (low active) - green */ - MPP43_GPIO, /* SW_LEFT (low active) */ - MPP44_GPIO, /* SW_RIGHT (low active) */ - MPP45_GPIO, /* SW_IDLE (low active) */ - MPP46_GPIO, /* SW_LEFT (low active) */ - MPP48_GPIO, /* WLAN_LED2 (low active) - yellow */ - 0 -}; - void __init usi_topkick_init(void) { /* * Basic setup. Needs to be called early. */ - kirkwood_mpp_conf(topkick_mpp_config); - - kirkwood_ge00_init(&topkick_ge00_data); - kirkwood_sdio_init(&topkick_mvsdio_data); } diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index e956d02..5ed7056 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -60,6 +60,11 @@ void dreamplug_init(void); #else static inline void dreamplug_init(void) {}; #endif +#ifdef CONFIG_MACH_GURUPLUG_DT +void guruplug_dt_init(void); +#else +static inline void guruplug_dt_init(void) {}; +#endif #ifdef CONFIG_MACH_TS219_DT void qnap_dt_ts219_init(void); #else @@ -130,12 +135,6 @@ void ns2_init(void); static inline void ns2_init(void) {}; #endif -#ifdef CONFIG_MACH_NSA310_DT -void nsa310_init(void); -#else -static inline void nsa310_init(void) {}; -#endif - #ifdef CONFIG_MACH_OPENBLOCKS_A6_DT void openblocks_a6_init(void); #else diff --git a/arch/arm/mach-mvebu/irq-armada-370-xp.c b/arch/arm/mach-mvebu/irq-armada-370-xp.c index 8e3fb08..274ff58 100644 --- a/arch/arm/mach-mvebu/irq-armada-370-xp.c +++ b/arch/arm/mach-mvebu/irq-armada-370-xp.c @@ -34,6 +34,7 @@ #define ARMADA_370_XP_INT_CONTROL (0x00) #define ARMADA_370_XP_INT_SET_ENABLE_OFFS (0x30) #define ARMADA_370_XP_INT_CLEAR_ENABLE_OFFS (0x34) +#define ARMADA_370_XP_INT_SOURCE_CTL(irq) (0x100 + irq*4) #define ARMADA_370_XP_CPU_INTACK_OFFS (0x44) @@ -41,28 +42,90 @@ #define ARMADA_370_XP_IN_DRBEL_MSK_OFFS (0xc) #define ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS (0x8) +#define ARMADA_370_XP_MAX_PER_CPU_IRQS (28) + #define ACTIVE_DOORBELLS (8) +static DEFINE_RAW_SPINLOCK(irq_controller_lock); + static void __iomem *per_cpu_int_base; static void __iomem *main_int_base; static struct irq_domain *armada_370_xp_mpic_domain; +/* + * In SMP mode: + * For shared global interrupts, mask/unmask global enable bit + * For CPU interrtups, mask/unmask the calling CPU's bit + */ static void armada_370_xp_irq_mask(struct irq_data *d) { +#ifdef CONFIG_SMP + irq_hw_number_t hwirq = irqd_to_hwirq(d); + + if (hwirq > ARMADA_370_XP_MAX_PER_CPU_IRQS) + writel(hwirq, main_int_base + + ARMADA_370_XP_INT_CLEAR_ENABLE_OFFS); + else + writel(hwirq, per_cpu_int_base + + ARMADA_370_XP_INT_SET_MASK_OFFS); +#else writel(irqd_to_hwirq(d), per_cpu_int_base + ARMADA_370_XP_INT_SET_MASK_OFFS); +#endif } static void armada_370_xp_irq_unmask(struct irq_data *d) { +#ifdef CONFIG_SMP + irq_hw_number_t hwirq = irqd_to_hwirq(d); + + if (hwirq > ARMADA_370_XP_MAX_PER_CPU_IRQS) + writel(hwirq, main_int_base + + ARMADA_370_XP_INT_SET_ENABLE_OFFS); + else + writel(hwirq, per_cpu_int_base + + ARMADA_370_XP_INT_CLEAR_MASK_OFFS); +#else writel(irqd_to_hwirq(d), per_cpu_int_base + ARMADA_370_XP_INT_CLEAR_MASK_OFFS); +#endif } #ifdef CONFIG_SMP static int armada_xp_set_affinity(struct irq_data *d, const struct cpumask *mask_val, bool force) { + unsigned long reg; + unsigned long new_mask = 0; + unsigned long online_mask = 0; + unsigned long count = 0; + irq_hw_number_t hwirq = irqd_to_hwirq(d); + int cpu; + + for_each_cpu(cpu, mask_val) { + new_mask |= 1 << cpu_logical_map(cpu); + count++; + } + + /* + * Forbid mutlicore interrupt affinity + * This is required since the MPIC HW doesn't limit + * several CPUs from acknowledging the same interrupt. + */ + if (count > 1) + return -EINVAL; + + for_each_cpu(cpu, cpu_online_mask) + online_mask |= 1 << cpu_logical_map(cpu); + + raw_spin_lock(&irq_controller_lock); + + reg = readl(main_int_base + ARMADA_370_XP_INT_SOURCE_CTL(hwirq)); + reg = (reg & (~online_mask)) | new_mask; + writel(reg, main_int_base + ARMADA_370_XP_INT_SOURCE_CTL(hwirq)); + + raw_spin_unlock(&irq_controller_lock); + return 0; } #endif @@ -82,10 +145,17 @@ static int armada_370_xp_mpic_irq_map(struct irq_domain *h, { armada_370_xp_irq_mask(irq_get_irq_data(virq)); writel(hw, main_int_base + ARMADA_370_XP_INT_SET_ENABLE_OFFS); - - irq_set_chip_and_handler(virq, &armada_370_xp_irq_chip, - handle_level_irq); irq_set_status_flags(virq, IRQ_LEVEL); + + if (hw < ARMADA_370_XP_MAX_PER_CPU_IRQS) { + irq_set_percpu_devid(virq); + irq_set_chip_and_handler(virq, &armada_370_xp_irq_chip, + handle_percpu_devid_irq); + + } else { + irq_set_chip_and_handler(virq, &armada_370_xp_irq_chip, + handle_level_irq); + } set_irq_flags(virq, IRQF_VALID | IRQF_PROBE); return 0; @@ -155,6 +225,15 @@ static int __init armada_370_xp_mpic_of_init(struct device_node *node, #ifdef CONFIG_SMP armada_xp_mpic_smp_cpu_init(); + + /* + * Set the default affinity from all CPUs to the boot cpu. + * This is required since the MPIC doesn't limit several CPUs + * from acknowledging the same interrupt. + */ + cpumask_clear(irq_default_affinity); + cpumask_set_cpu(smp_processor_id(), irq_default_affinity); + #endif return 0; @@ -173,7 +252,7 @@ asmlinkage void __exception_irq_entry armada_370_xp_handle_irq(struct pt_regs if (irqnr > 1022) break; - if (irqnr >= 8) { + if (irqnr > 0) { irqnr = irq_find_mapping(armada_370_xp_mpic_domain, irqnr); handle_IRQ(irqnr, regs); diff --git a/drivers/clocksource/time-armada-370-xp.c b/drivers/clocksource/time-armada-370-xp.c index a4605fd..47a6730 100644 --- a/drivers/clocksource/time-armada-370-xp.c +++ b/drivers/clocksource/time-armada-370-xp.c @@ -27,8 +27,10 @@ #include <linux/of_address.h> #include <linux/irq.h> #include <linux/module.h> -#include <asm/sched_clock.h> +#include <asm/sched_clock.h> +#include <asm/localtimer.h> +#include <linux/percpu.h> /* * Timer block registers. */ @@ -49,6 +51,7 @@ #define TIMER1_RELOAD_OFF 0x0018 #define TIMER1_VAL_OFF 0x001c +#define LCL_TIMER_EVENTS_STATUS 0x0028 /* Global timers are connected to the coherency fabric clock, and the below divider reduces their incrementing frequency. */ #define TIMER_DIVIDER_SHIFT 5 @@ -57,14 +60,17 @@ /* * SoC-specific data. */ -static void __iomem *timer_base; -static int timer_irq; +static void __iomem *timer_base, *local_base; +static unsigned int timer_clk; +static bool timer25Mhz = true; /* * Number of timer ticks per jiffy. */ static u32 ticks_per_jiffy; +static struct clock_event_device __percpu **percpu_armada_370_xp_evt; + static u32 notrace armada_370_xp_read_sched_clock(void) { return ~readl(timer_base + TIMER0_VAL_OFF); @@ -78,24 +84,23 @@ armada_370_xp_clkevt_next_event(unsigned long delta, struct clock_event_device *dev) { u32 u; - /* * Clear clockevent timer interrupt. */ - writel(TIMER1_CLR_MASK, timer_base + TIMER_EVENTS_STATUS); + writel(TIMER0_CLR_MASK, local_base + LCL_TIMER_EVENTS_STATUS); /* * Setup new clockevent timer value. */ - writel(delta, timer_base + TIMER1_VAL_OFF); + writel(delta, local_base + TIMER0_VAL_OFF); /* * Enable the timer. */ - u = readl(timer_base + TIMER_CTRL_OFF); - u = ((u & ~TIMER1_RELOAD_EN) | TIMER1_EN | - TIMER1_DIV(TIMER_DIVIDER_SHIFT)); - writel(u, timer_base + TIMER_CTRL_OFF); + u = readl(local_base + TIMER_CTRL_OFF); + u = ((u & ~TIMER0_RELOAD_EN) | TIMER0_EN | + TIMER0_DIV(TIMER_DIVIDER_SHIFT)); + writel(u, local_base + TIMER_CTRL_OFF); return 0; } @@ -107,37 +112,38 @@ armada_370_xp_clkevt_mode(enum clock_event_mode mode, u32 u; if (mode == CLOCK_EVT_MODE_PERIODIC) { + /* * Setup timer to fire at 1/HZ intervals. */ - writel(ticks_per_jiffy - 1, timer_base + TIMER1_RELOAD_OFF); - writel(ticks_per_jiffy - 1, timer_base + TIMER1_VAL_OFF); + writel(ticks_per_jiffy - 1, local_base + TIMER0_RELOAD_OFF); + writel(ticks_per_jiffy - 1, local_base + TIMER0_VAL_OFF); /* * Enable timer. */ - u = readl(timer_base + TIMER_CTRL_OFF); - writel((u | TIMER1_EN | TIMER1_RELOAD_EN | - TIMER1_DIV(TIMER_DIVIDER_SHIFT)), - timer_base + TIMER_CTRL_OFF); + u = readl(local_base + TIMER_CTRL_OFF); + + writel((u | TIMER0_EN | TIMER0_RELOAD_EN | + TIMER0_DIV(TIMER_DIVIDER_SHIFT)), + local_base + TIMER_CTRL_OFF); } else { /* * Disable timer. */ - u = readl(timer_base + TIMER_CTRL_OFF); - writel(u & ~TIMER1_EN, timer_base + TIMER_CTRL_OFF); + u = readl(local_base + TIMER_CTRL_OFF); + writel(u & ~TIMER0_EN, local_base + TIMER_CTRL_OFF); /* * ACK pending timer interrupt. */ - writel(TIMER1_CLR_MASK, timer_base + TIMER_EVENTS_STATUS); - + writel(TIMER0_CLR_MASK, local_base + LCL_TIMER_EVENTS_STATUS); } } static struct clock_event_device armada_370_xp_clkevt = { - .name = "armada_370_xp_tick", + .name = "armada_370_xp_per_cpu_tick", .features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC, .shift = 32, .rating = 300, @@ -150,32 +156,78 @@ static irqreturn_t armada_370_xp_timer_interrupt(int irq, void *dev_id) /* * ACK timer interrupt and call event handler. */ + struct clock_event_device *evt = *(struct clock_event_device **)dev_id; - writel(TIMER1_CLR_MASK, timer_base + TIMER_EVENTS_STATUS); - armada_370_xp_clkevt.event_handler(&armada_370_xp_clkevt); + writel(TIMER0_CLR_MASK, local_base + LCL_TIMER_EVENTS_STATUS); + evt->event_handler(evt); return IRQ_HANDLED; } -static struct irqaction armada_370_xp_timer_irq = { - .name = "armada_370_xp_tick", - .flags = IRQF_DISABLED | IRQF_TIMER, - .handler = armada_370_xp_timer_interrupt +/* + * Setup the local clock events for a CPU. + */ +static int __cpuinit armada_370_xp_timer_setup(struct clock_event_device *evt) +{ + u32 u; + int cpu = smp_processor_id(); + + /* Use existing clock_event for cpu 0 */ + if (!smp_processor_id()) + return 0; + + u = readl(local_base + TIMER_CTRL_OFF); + if (timer25Mhz) + writel(u | TIMER0_25MHZ, local_base + TIMER_CTRL_OFF); + else + writel(u & ~TIMER0_25MHZ, local_base + TIMER_CTRL_OFF); + + evt->name = armada_370_xp_clkevt.name; + evt->irq = armada_370_xp_clkevt.irq; + evt->features = armada_370_xp_clkevt.features; + evt->shift = armada_370_xp_clkevt.shift; + evt->rating = armada_370_xp_clkevt.rating, + evt->set_next_event = armada_370_xp_clkevt_next_event, + evt->set_mode = armada_370_xp_clkevt_mode, + evt->cpumask = cpumask_of(cpu); + + *__this_cpu_ptr(percpu_armada_370_xp_evt) = evt; + + clockevents_config_and_register(evt, timer_clk, 1, 0xfffffffe); + enable_percpu_irq(evt->irq, 0); + + return 0; +} + +static void armada_370_xp_timer_stop(struct clock_event_device *evt) +{ + evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt); + disable_percpu_irq(evt->irq); +} + +static struct local_timer_ops armada_370_xp_local_timer_ops __cpuinitdata = { + .setup = armada_370_xp_timer_setup, + .stop = armada_370_xp_timer_stop, }; void __init armada_370_xp_timer_init(void) { u32 u; struct device_node *np; - unsigned int timer_clk; + int res; + np = of_find_compatible_node(NULL, NULL, "marvell,armada-370-xp-timer"); timer_base = of_iomap(np, 0); WARN_ON(!timer_base); + local_base = of_iomap(np, 1); if (of_find_property(np, "marvell,timer-25Mhz", NULL)) { /* The fixed 25MHz timer is available so let's use it */ + u = readl(local_base + TIMER_CTRL_OFF); + writel(u | TIMER0_25MHZ, + local_base + TIMER_CTRL_OFF); u = readl(timer_base + TIMER_CTRL_OFF); - writel(u | TIMER0_25MHZ | TIMER1_25MHZ, + writel(u | TIMER0_25MHZ, timer_base + TIMER_CTRL_OFF); timer_clk = 25000000; } else { @@ -183,15 +235,23 @@ void __init armada_370_xp_timer_init(void) struct clk *clk = of_clk_get(np, 0); WARN_ON(IS_ERR(clk)); rate = clk_get_rate(clk); + u = readl(local_base + TIMER_CTRL_OFF); + writel(u & ~(TIMER0_25MHZ), + local_base + TIMER_CTRL_OFF); + u = readl(timer_base + TIMER_CTRL_OFF); - writel(u & ~(TIMER0_25MHZ | TIMER1_25MHZ), + writel(u & ~(TIMER0_25MHZ), timer_base + TIMER_CTRL_OFF); + timer_clk = rate / TIMER_DIVIDER; + timer25Mhz = false; } - /* We use timer 0 as clocksource, and timer 1 for - clockevents */ - timer_irq = irq_of_parse_and_map(np, 1); + /* + * We use timer 0 as clocksource, and private(local) timer 0 + * for clockevents + */ + armada_370_xp_clkevt.irq = irq_of_parse_and_map(np, 4); ticks_per_jiffy = (timer_clk + HZ / 2) / HZ; @@ -216,12 +276,26 @@ void __init armada_370_xp_timer_init(void) "armada_370_xp_clocksource", timer_clk, 300, 32, clocksource_mmio_readl_down); - /* - * Setup clockevent timer (interrupt-driven). - */ - setup_irq(timer_irq, &armada_370_xp_timer_irq); + /* Register the clockevent on the private timer of CPU 0 */ armada_370_xp_clkevt.cpumask = cpumask_of(0); clockevents_config_and_register(&armada_370_xp_clkevt, timer_clk, 1, 0xfffffffe); -} + percpu_armada_370_xp_evt = alloc_percpu(struct clock_event_device *); + + + /* + * Setup clockevent timer (interrupt-driven). + */ + *__this_cpu_ptr(percpu_armada_370_xp_evt) = &armada_370_xp_clkevt; + res = request_percpu_irq(armada_370_xp_clkevt.irq, + armada_370_xp_timer_interrupt, + armada_370_xp_clkevt.name, + percpu_armada_370_xp_evt); + if (!res) { + enable_percpu_irq(armada_370_xp_clkevt.irq, 0); +#ifdef CONFIG_LOCAL_TIMERS + local_timer_register(&armada_370_xp_local_timer_ops); +#endif + } +} |
