diff options
| -rw-r--r-- | Documentation/devicetree/bindings/ata/ahci-platform.txt | 1 | ||||
| -rw-r--r-- | drivers/ata/Kconfig | 9 | ||||
| -rw-r--r-- | drivers/ata/Makefile | 1 | ||||
| -rw-r--r-- | drivers/ata/ahci_mvebu.c | 127 |
4 files changed, 138 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt index 5598862..d6b07e8 100644 --- a/Documentation/devicetree/bindings/ata/ahci-platform.txt +++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt @@ -9,6 +9,7 @@ Required properties: - "fsl,imx53-ahci" - "fsl,imx6q-ahci" - "ibm,476gtr-ahci" + - "marvell,armada-380-ahci" - "snps,dwc-ahci" - "snps,exynos5440-ahci" - "snps,spear-ahci" diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 20e03a7..58d04cb 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -123,6 +123,15 @@ config AHCI_IMX If unsure, say N. +config AHCI_MVEBU + tristate "Marvell EBU AHCI SATA support" + depends on ARCH_MVEBU + help + This option enables support for the Marvebu EBU SoC's + onboard AHCI SATA. + + If unsure, say N. + config AHCI_SUNXI tristate "Allwinner sunxi AHCI SATA support" depends on ARCH_SUNXI diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index 44c8016..5a02aee 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_SATA_DWC) += sata_dwc_460ex.o obj-$(CONFIG_SATA_HIGHBANK) += sata_highbank.o libahci.o obj-$(CONFIG_AHCI_DA850) += ahci_da850.o libahci.o libahci_platform.o obj-$(CONFIG_AHCI_IMX) += ahci_imx.o libahci.o libahci_platform.o +obj-$(CONFIG_AHCI_MVEBU) += ahci_mvebu.o libahci.o libahci_platform.o obj-$(CONFIG_AHCI_SUNXI) += ahci_sunxi.o libahci.o libahci_platform.o obj-$(CONFIG_AHCI_ST) += ahci_st.o libahci.o libahci_platform.o obj-$(CONFIG_AHCI_XGENE) += ahci_xgene.o libahci.o libahci_platform.o diff --git a/drivers/ata/ahci_mvebu.c b/drivers/ata/ahci_mvebu.c new file mode 100644 index 0000000..1df8630 --- /dev/null +++ b/drivers/ata/ahci_mvebu.c @@ -0,0 +1,127 @@ +/* + * AHCI glue platform driver for Marvell EBU SOCs + * + * Copyright (C) 2014 Marvell + * + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * Marcin Wojtas <mw@semihalf.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/ahci_platform.h> +#include <linux/kernel.h> +#include <linux/mbus.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include "ahci.h" + +#define AHCI_VENDOR_SPECIFIC_0_ADDR 0xa0 +#define AHCI_VENDOR_SPECIFIC_0_DATA 0xa4 + +#define AHCI_WINDOW_CTRL(win) (0x60 + ((win) << 4)) +#define AHCI_WINDOW_BASE(win) (0x64 + ((win) << 4)) +#define AHCI_WINDOW_SIZE(win) (0x68 + ((win) << 4)) + +static void ahci_mvebu_mbus_config(struct ahci_host_priv *hpriv, + const struct mbus_dram_target_info *dram) +{ + int i; + + for (i = 0; i < 4; i++) { + writel(0, hpriv->mmio + AHCI_WINDOW_CTRL(i)); + writel(0, hpriv->mmio + AHCI_WINDOW_BASE(i)); + writel(0, hpriv->mmio + AHCI_WINDOW_SIZE(i)); + } + + for (i = 0; i < dram->num_cs; i++) { + const struct mbus_dram_window *cs = dram->cs + i; + + writel((cs->mbus_attr << 8) | + (dram->mbus_dram_target_id << 4) | 1, + hpriv->mmio + AHCI_WINDOW_CTRL(i)); + writel(cs->base, hpriv->mmio + AHCI_WINDOW_BASE(i)); + writel(((cs->size - 1) & 0xffff0000), + hpriv->mmio + AHCI_WINDOW_SIZE(i)); + } +} + +static void ahci_mvebu_regret_option(struct ahci_host_priv *hpriv) +{ + /* + * Enable the regret bit to allow the SATA unit to regret a + * request that didn't receive an acknowlegde and avoid a + * deadlock + */ + writel(0x4, hpriv->mmio + AHCI_VENDOR_SPECIFIC_0_ADDR); + writel(0x80, hpriv->mmio + AHCI_VENDOR_SPECIFIC_0_DATA); +} + +static const struct ata_port_info ahci_mvebu_port_info = { + .flags = AHCI_FLAG_COMMON, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_platform_ops, +}; + +static int ahci_mvebu_probe(struct platform_device *pdev) +{ + struct ahci_host_priv *hpriv; + const struct mbus_dram_target_info *dram; + int rc; + + hpriv = ahci_platform_get_resources(pdev); + if (IS_ERR(hpriv)) + return PTR_ERR(hpriv); + + rc = ahci_platform_enable_resources(hpriv); + if (rc) + return rc; + + dram = mv_mbus_dram_info(); + if (!dram) + return -ENODEV; + + ahci_mvebu_mbus_config(hpriv, dram); + ahci_mvebu_regret_option(hpriv); + + rc = ahci_platform_init_host(pdev, hpriv, &ahci_mvebu_port_info, 0, 0); + if (rc) + goto disable_resources; + + return 0; + +disable_resources: + ahci_platform_disable_resources(hpriv); + return rc; +} + +static const struct of_device_id ahci_mvebu_of_match[] = { + { .compatible = "marvell,armada-380-ahci", }, + { }, +}; +MODULE_DEVICE_TABLE(of, ahci_mvebu_of_match); + +/* + * We currently don't provide power management related operations, + * since there is no suspend/resume support at the platform level for + * Armada 38x for the moment. + */ +static struct platform_driver ahci_mvebu_driver = { + .probe = ahci_mvebu_probe, + .remove = ata_platform_remove_one, + .driver = { + .name = "ahci-mvebu", + .owner = THIS_MODULE, + .of_match_table = ahci_mvebu_of_match, + }, +}; +module_platform_driver(ahci_mvebu_driver); + +MODULE_DESCRIPTION("Marvell EBU AHCI SATA driver"); +MODULE_AUTHOR("Thomas Petazzoni <thomas.petazzoni@free-electrons.com>, Marcin Wojtas <mw@semihalf.com>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:ahci_mvebu"); |
