diff options
| -rw-r--r-- | Documentation/devicetree/bindings/thermal/exynos-thermal.txt | 1 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/thermal/st-thermal.txt | 42 | ||||
| -rw-r--r-- | drivers/thermal/Kconfig | 7 | ||||
| -rw-r--r-- | drivers/thermal/Makefile | 1 | ||||
| -rw-r--r-- | drivers/thermal/cpu_cooling.c | 2 | ||||
| -rw-r--r-- | drivers/thermal/int3403_thermal.c | 67 | ||||
| -rw-r--r-- | drivers/thermal/samsung/exynos_tmu.c | 11 | ||||
| -rw-r--r-- | drivers/thermal/samsung/exynos_tmu.h | 3 | ||||
| -rw-r--r-- | drivers/thermal/samsung/exynos_tmu_data.c | 89 | ||||
| -rw-r--r-- | drivers/thermal/samsung/exynos_tmu_data.h | 7 | ||||
| -rw-r--r-- | drivers/thermal/st/Kconfig | 12 | ||||
| -rw-r--r-- | drivers/thermal/st/Makefile | 3 | ||||
| -rw-r--r-- | drivers/thermal/st/st_thermal.c | 313 | ||||
| -rw-r--r-- | drivers/thermal/st/st_thermal.h | 104 | ||||
| -rw-r--r-- | drivers/thermal/st/st_thermal_memmap.c | 209 | ||||
| -rw-r--r-- | drivers/thermal/st/st_thermal_syscfg.c | 179 | ||||
| -rw-r--r-- | include/linux/thermal.h | 46 |
17 files changed, 1081 insertions, 15 deletions
diff --git a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt index c949092..ae738f5 100644 --- a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt @@ -3,6 +3,7 @@ ** Required properties: - compatible : One of the following: + "samsung,exynos3250-tmu" "samsung,exynos4412-tmu" "samsung,exynos4210-tmu" "samsung,exynos5250-tmu" diff --git a/Documentation/devicetree/bindings/thermal/st-thermal.txt b/Documentation/devicetree/bindings/thermal/st-thermal.txt new file mode 100644 index 0000000..3b9251b --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/st-thermal.txt @@ -0,0 +1,42 @@ +Binding for Thermal Sensor driver for STMicroelectronics STi series of SoCs. + +Required parameters: +------------------- + +compatible : st,<SoC>-<module>-thermal; should be one of: + "st,stih415-sas-thermal", + "st,stih415-mpe-thermal", + "st,stih416-sas-thermal" + "st,stih416-mpe-thermal" + "st,stid127-thermal" or + "st,stih407-thermal" + according to the SoC type (stih415, stih416, stid127, stih407) + and module type (sas or mpe). On stid127 & stih407 there is only + one die/module, so there is no module type in the compatible + string. +clock-names : Should be "thermal". + See: Documentation/devicetree/bindings/resource-names.txt +clocks : Phandle of the clock used by the thermal sensor. + See: Documentation/devicetree/bindings/clock/clock-bindings.txt + +Optional parameters: +------------------- + +reg : For non-sysconf based sensors, this should be the physical base + address and length of the sensor's registers. +interrupts : Standard way to define interrupt number. + Interrupt is mandatory to be defined when compatible is + "stih416-mpe-thermal". + NB: For thermal sensor's for which no interrupt has been + defined, a polling delay of 1000ms will be used to read the + temperature from device. + +Example: + + temp1@fdfe8000 { + compatible = "st,stih416-mpe-thermal"; + reg = <0xfdfe8000 0x10>; + clock-names = "thermal"; + clocks = <&clk_m_mpethsens>; + interrupts = <GIC_SPI 23 IRQ_TYPE_NONE>; + }; diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index f9a1386..693208e 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -151,7 +151,7 @@ config KIRKWOOD_THERMAL config DOVE_THERMAL tristate "Temperature sensor on Marvell Dove SoCs" - depends on ARCH_DOVE + depends on ARCH_DOVE || MACH_DOVE depends on OF help Support for the Dove thermal sensor driver in the Linux thermal @@ -243,4 +243,9 @@ depends on ARCH_EXYNOS source "drivers/thermal/samsung/Kconfig" endmenu +menu "STMicroelectronics thermal drivers" +depends on ARCH_STI && OF +source "drivers/thermal/st/Kconfig" +endmenu + endif diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index de0636a..31e232f 100644 --- a/drivers/thermal/Makefile +++ b/drivers/thermal/Makefile @@ -32,3 +32,4 @@ obj-$(CONFIG_X86_PKG_TEMP_THERMAL) += x86_pkg_temp_thermal.o obj-$(CONFIG_INTEL_SOC_DTS_THERMAL) += intel_soc_dts_thermal.o obj-$(CONFIG_TI_SOC_THERMAL) += ti-soc-thermal/ obj-$(CONFIG_ACPI_INT3403_THERMAL) += int3403_thermal.o +obj-$(CONFIG_ST_THERMAL) += st/ diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c index 84a75f8..1ab0018 100644 --- a/drivers/thermal/cpu_cooling.c +++ b/drivers/thermal/cpu_cooling.c @@ -305,7 +305,7 @@ static int cpufreq_apply_cooling(struct cpufreq_cooling_device *cpufreq_device, * @event: value showing cpufreq event for which this function invoked. * @data: callback-specific data * - * Callback to highjack the notification on cpufreq policy transition. + * Callback to hijack the notification on cpufreq policy transition. * Every time there is a change in policy, we will intercept and * update the cpufreq policy with thermal constraints. * diff --git a/drivers/thermal/int3403_thermal.c b/drivers/thermal/int3403_thermal.c index e93f025..17554ee 100644 --- a/drivers/thermal/int3403_thermal.c +++ b/drivers/thermal/int3403_thermal.c @@ -33,6 +33,10 @@ struct int3403_sensor { struct thermal_zone_device *tzone; unsigned long *thresholds; + unsigned long crit_temp; + int crit_trip_id; + unsigned long psv_temp; + int psv_trip_id; }; static int sys_get_curr_temp(struct thermal_zone_device *tzone, @@ -79,12 +83,18 @@ static int sys_get_trip_temp(struct thermal_zone_device *tzone, struct acpi_device *device = tzone->devdata; struct int3403_sensor *obj = acpi_driver_data(device); - /* - * get_trip_temp is a mandatory callback but - * PATx method doesn't return any value, so return - * cached value, which was last set from user space. - */ - *temp = obj->thresholds[trip]; + if (trip == obj->crit_trip_id) + *temp = obj->crit_temp; + else if (trip == obj->psv_trip_id) + *temp = obj->psv_temp; + else { + /* + * get_trip_temp is a mandatory callback but + * PATx method doesn't return any value, so return + * cached value, which was last set from user space. + */ + *temp = obj->thresholds[trip]; + } return 0; } @@ -92,8 +102,14 @@ static int sys_get_trip_temp(struct thermal_zone_device *tzone, static int sys_get_trip_type(struct thermal_zone_device *thermal, int trip, enum thermal_trip_type *type) { + struct acpi_device *device = thermal->devdata; + struct int3403_sensor *obj = acpi_driver_data(device); + /* Mandatory callback, may not mean much here */ - *type = THERMAL_TRIP_PASSIVE; + if (trip == obj->crit_trip_id) + *type = THERMAL_TRIP_CRITICAL; + else + *type = THERMAL_TRIP_PASSIVE; return 0; } @@ -155,6 +171,34 @@ static void acpi_thermal_notify(struct acpi_device *device, u32 event) } } +static int sys_get_trip_crt(struct acpi_device *device, unsigned long *temp) +{ + unsigned long long crt; + acpi_status status; + + status = acpi_evaluate_integer(device->handle, "_CRT", NULL, &crt); + if (ACPI_FAILURE(status)) + return -EIO; + + *temp = DECI_KELVIN_TO_MILLI_CELSIUS(crt, KELVIN_OFFSET); + + return 0; +} + +static int sys_get_trip_psv(struct acpi_device *device, unsigned long *temp) +{ + unsigned long long psv; + acpi_status status; + + status = acpi_evaluate_integer(device->handle, "_PSV", NULL, &psv); + if (ACPI_FAILURE(status)) + return -EIO; + + *temp = DECI_KELVIN_TO_MILLI_CELSIUS(psv, KELVIN_OFFSET); + + return 0; +} + static int acpi_int3403_add(struct acpi_device *device) { int result = 0; @@ -194,6 +238,15 @@ static int acpi_int3403_add(struct acpi_device *device) return -ENOMEM; trip_mask = BIT(trip_cnt) - 1; } + + obj->psv_trip_id = -1; + if (!sys_get_trip_psv(device, &obj->psv_temp)) + obj->psv_trip_id = trip_cnt++; + + obj->crit_trip_id = -1; + if (!sys_get_trip_crt(device, &obj->crit_temp)) + obj->crit_trip_id = trip_cnt++; + obj->tzone = thermal_zone_device_register(acpi_device_bid(device), trip_cnt, trip_mask, device, &tzone_ops, NULL, 0, 0); diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c index d7ca9f4..acbff14 100644 --- a/drivers/thermal/samsung/exynos_tmu.c +++ b/drivers/thermal/samsung/exynos_tmu.c @@ -505,6 +505,10 @@ static irqreturn_t exynos_tmu_irq(int irq, void *id) static const struct of_device_id exynos_tmu_match[] = { { + .compatible = "samsung,exynos3250-tmu", + .data = (void *)EXYNOS3250_TMU_DRV_DATA, + }, + { .compatible = "samsung,exynos4210-tmu", .data = (void *)EXYNOS4210_TMU_DRV_DATA, }, @@ -677,7 +681,8 @@ static int exynos_tmu_probe(struct platform_device *pdev) goto err_clk_sec; } - if (pdata->type == SOC_ARCH_EXYNOS4210 || + if (pdata->type == SOC_ARCH_EXYNOS3250 || + pdata->type == SOC_ARCH_EXYNOS4210 || pdata->type == SOC_ARCH_EXYNOS4412 || pdata->type == SOC_ARCH_EXYNOS5250 || pdata->type == SOC_ARCH_EXYNOS5260 || @@ -759,10 +764,10 @@ static int exynos_tmu_remove(struct platform_device *pdev) { struct exynos_tmu_data *data = platform_get_drvdata(pdev); - exynos_tmu_control(pdev, false); - exynos_unregister_thermal(data->reg_conf); + exynos_tmu_control(pdev, false); + clk_unprepare(data->clk); if (!IS_ERR(data->clk_sec)) clk_unprepare(data->clk_sec); diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h index edd08cf..1b4a644 100644 --- a/drivers/thermal/samsung/exynos_tmu.h +++ b/drivers/thermal/samsung/exynos_tmu.h @@ -40,7 +40,8 @@ enum calibration_mode { }; enum soc_type { - SOC_ARCH_EXYNOS4210 = 1, + SOC_ARCH_EXYNOS3250 = 1, + SOC_ARCH_EXYNOS4210, SOC_ARCH_EXYNOS4412, SOC_ARCH_EXYNOS5250, SOC_ARCH_EXYNOS5260, diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c index c1d81dc..aa8e0de 100644 --- a/drivers/thermal/samsung/exynos_tmu_data.c +++ b/drivers/thermal/samsung/exynos_tmu_data.c @@ -90,6 +90,95 @@ struct exynos_tmu_init_data const exynos4210_default_tmu_data = { }; #endif +#if defined(CONFIG_SOC_EXYNOS3250) +static const struct exynos_tmu_registers exynos3250_tmu_registers = { + .triminfo_data = EXYNOS_TMU_REG_TRIMINFO, + .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT, + .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT, + .tmu_ctrl = EXYNOS_TMU_REG_CONTROL, + .test_mux_addr_shift = EXYNOS4412_MUX_ADDR_SHIFT, + .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT, + .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK, + .therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT, + .therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK, + .therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT, + .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT, + .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK, + .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT, + .tmu_status = EXYNOS_TMU_REG_STATUS, + .tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP, + .threshold_th0 = EXYNOS_THD_TEMP_RISE, + .threshold_th1 = EXYNOS_THD_TEMP_FALL, + .tmu_inten = EXYNOS_TMU_REG_INTEN, + .inten_rise0_shift = EXYNOS_TMU_INTEN_RISE0_SHIFT, + .inten_rise1_shift = EXYNOS_TMU_INTEN_RISE1_SHIFT, + .inten_rise2_shift = EXYNOS_TMU_INTEN_RISE2_SHIFT, + .inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT, + .tmu_intstat = EXYNOS_TMU_REG_INTSTAT, + .tmu_intclear = EXYNOS_TMU_REG_INTCLEAR, + .intclr_fall_shift = EXYNOS_TMU_CLEAR_FALL_INT_SHIFT, + .intclr_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT, + .intclr_rise_mask = EXYNOS_TMU_RISE_INT_MASK, + .intclr_fall_mask = EXYNOS_TMU_FALL_INT_MASK, + .emul_con = EXYNOS_EMUL_CON, + .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT, + .emul_time_shift = EXYNOS_EMUL_TIME_SHIFT, + .emul_time_mask = EXYNOS_EMUL_TIME_MASK, +}; + +#define EXYNOS3250_TMU_DATA \ + .threshold_falling = 10, \ + .trigger_levels[0] = 70, \ + .trigger_levels[1] = 95, \ + .trigger_levels[2] = 110, \ + .trigger_levels[3] = 120, \ + .trigger_enable[0] = true, \ + .trigger_enable[1] = true, \ + .trigger_enable[2] = true, \ + .trigger_enable[3] = false, \ + .trigger_type[0] = THROTTLE_ACTIVE, \ + .trigger_type[1] = THROTTLE_ACTIVE, \ + .trigger_type[2] = SW_TRIP, \ + .trigger_type[3] = HW_TRIP, \ + .max_trigger_level = 4, \ + .gain = 8, \ + .reference_voltage = 16, \ + .noise_cancel_mode = 4, \ + .cal_type = TYPE_TWO_POINT_TRIMMING, \ + .efuse_value = 55, \ + .min_efuse_value = 40, \ + .max_efuse_value = 100, \ + .first_point_trim = 25, \ + .second_point_trim = 85, \ + .default_temp_offset = 50, \ + .freq_tab[0] = { \ + .freq_clip_max = 800 * 1000, \ + .temp_level = 70, \ + }, \ + .freq_tab[1] = { \ + .freq_clip_max = 400 * 1000, \ + .temp_level = 95, \ + }, \ + .freq_tab_count = 2, \ + .registers = &exynos3250_tmu_registers, \ + .features = (TMU_SUPPORT_EMULATION | \ + TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \ + TMU_SUPPORT_EMUL_TIME) +#endif + +#if defined(CONFIG_SOC_EXYNOS3250) +struct exynos_tmu_init_data const exynos3250_default_tmu_data = { + .tmu_data = { + { + EXYNOS3250_TMU_DATA, + .type = SOC_ARCH_EXYNOS3250, + .test_mux = EXYNOS4412_MUX_ADDR_VALUE, + }, + }, + .tmu_count = 1, +}; +#endif + #if defined(CONFIG_SOC_EXYNOS4412) || defined(CONFIG_SOC_EXYNOS5250) static const struct exynos_tmu_registers exynos4412_tmu_registers = { .triminfo_data = EXYNOS_TMU_REG_TRIMINFO, diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h index d268981..f0979e5 100644 --- a/drivers/thermal/samsung/exynos_tmu_data.h +++ b/drivers/thermal/samsung/exynos_tmu_data.h @@ -148,6 +148,13 @@ #define EXYNOS5440_TMU_TH_RISE4_SHIFT 24 #define EXYNOS5440_EFUSE_SWAP_OFFSET 8 +#if defined(CONFIG_SOC_EXYNOS3250) +extern struct exynos_tmu_init_data const exynos3250_default_tmu_data; +#define EXYNOS3250_TMU_DRV_DATA (&exynos3250_default_tmu_data) +#else +#define EXYNOS3250_TMU_DRV_DATA (NULL) +#endif + #if defined(CONFIG_CPU_EXYNOS4210) extern struct exynos_tmu_init_data const exynos4210_default_tmu_data; #define EXYNOS4210_TMU_DRV_DATA (&exynos4210_default_tmu_data) diff --git a/drivers/thermal/st/Kconfig b/drivers/thermal/st/Kconfig new file mode 100644 index 0000000..490fdbe --- /dev/null +++ b/drivers/thermal/st/Kconfig @@ -0,0 +1,12 @@ +config ST_THERMAL + tristate "Thermal sensors on STMicroelectronics STi series of SoCs" + help + Support for thermal sensors on STMicroelectronics STi series of SoCs. + +config ST_THERMAL_SYSCFG + select ST_THERMAL + tristate "STi series syscfg register access based thermal sensors" + +config ST_THERMAL_MEMMAP + select ST_THERMAL + tristate "STi series memory mapped access based thermal sensors" diff --git a/drivers/thermal/st/Makefile b/drivers/thermal/st/Makefile new file mode 100644 index 0000000..b388789 --- /dev/null +++ b/drivers/thermal/st/Makefile @@ -0,0 +1,3 @@ +obj-$(CONFIG_ST_THERMAL) := st_thermal.o +obj-$(CONFIG_ST_THERMAL_SYSCFG) += st_thermal_syscfg.o +obj-$(CONFIG_ST_THERMAL_MEMMAP) += st_thermal_memmap.o diff --git a/drivers/thermal/st/st_thermal.c b/drivers/thermal/st/st_thermal.c new file mode 100644 index 0000000..90163b3 --- /dev/null +++ b/drivers/thermal/st/st_thermal.c @@ -0,0 +1,313 @@ +/* + * ST Thermal Sensor Driver core routines + * Author: Ajit Pal Singh <ajitpal.singh@st.com> + * + * Copyright (C) 2003-2014 STMicroelectronics (R&D) Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include <linux/clk.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> + +#include "st_thermal.h" + +/* The Thermal Framework expects millidegrees */ +#define mcelsius(temp) ((temp) * 1000) + +/* + * Function to allocate regfields which are common + * between syscfg and memory mapped based sensors + */ +int st_thermal_alloc_regfields(struct st_thermal_sensor *sensor) +{ + struct device *dev = sensor->dev; + struct regmap *regmap = sensor->regmap; + const struct reg_field *reg_fields = sensor->cdata->reg_fields; + + sensor->dcorrect = devm_regmap_field_alloc(dev, regmap, + reg_fields[DCORRECT]); + + sensor->overflow = devm_regmap_field_alloc(dev, regmap, + reg_fields[OVERFLOW]); + + sensor->temp_data = devm_regmap_field_alloc(dev, regmap, + reg_fields[DATA]); + + if (IS_ERR(sensor->dcorrect) || + IS_ERR(sensor->overflow) || + IS_ERR(sensor->temp_data)) { + dev_err(dev, "failed to allocate common regfields\n"); + return -EINVAL; + } + + return sensor->ops->alloc_regfields(sensor); +} + +static int st_thermal_sensor_on(struct st_thermal_sensor *sensor) +{ + int ret; + struct device *dev = sensor->dev; + + ret = clk_prepare_enable(sensor->clk); + if (ret) { + dev_err(dev, "failed to enable clk\n"); + return ret; + } + + ret = sensor->ops->power_ctrl(sensor, POWER_ON); + if (ret) { + dev_err(dev, "failed to power on sensor\n"); + clk_disable_unprepare(sensor->clk); + } + + return ret; +} + +static int st_thermal_sensor_off(struct st_thermal_sensor *sensor) +{ + int ret; + + ret = sensor->ops->power_ctrl(sensor, POWER_OFF); + if (ret) + return ret; + + clk_disable_unprepare(sensor->clk); + + return 0; +} + +static int st_thermal_calibration(struct st_thermal_sensor *sensor) +{ + int ret; + unsigned int val; + struct device *dev = sensor->dev; + + /* Check if sensor calibration data is already written */ + ret = regmap_field_read(sensor->dcorrect, &val); + if (ret) { + dev_err(dev, "failed to read calibration data\n"); + return ret; + } + + if (!val) { + /* + * Sensor calibration value not set by bootloader, + * default calibration data to be used + */ + ret = regmap_field_write(sensor->dcorrect, + sensor->cdata->calibration_val); + if (ret) + dev_err(dev, "failed to set calibration data\n"); + } + + return ret; +} + +/* Callback to get temperature from HW*/ +static int st_thermal_get_temp(struct thermal_zone_device *th, + unsigned long *temperature) +{ + struct st_thermal_sensor *sensor = th->devdata; + struct device *dev = sensor->dev; + unsigned int temp; + unsigned int overflow; + int ret; + + ret = regmap_field_read(sensor->overflow, &overflow); + if (ret) + return ret; + if (overflow) + return -EIO; + + ret = regmap_field_read(sensor->temp_data, &temp); + if (ret) + return ret; + + temp += sensor->cdata->temp_adjust_val; + temp = mcelsius(temp); + + dev_dbg(dev, "temperature: %d\n", temp); + + *temperature = temp; + + return 0; +} + +static int st_thermal_get_trip_type(struct thermal_zone_device *th, + int trip, enum thermal_trip_type *type) +{ + struct st_thermal_sensor *sensor = th->devdata; + struct device *dev = sensor->dev; + + switch (trip) { + case 0: + *type = THERMAL_TRIP_CRITICAL; + break; + default: + dev_err(dev, "invalid trip point\n"); + return -EINVAL; + } + + return 0; +} + +static int st_thermal_get_trip_temp(struct thermal_zone_device *th, + int trip, unsigned long *temp) +{ + struct st_thermal_sensor *sensor = th->devdata; + struct device *dev = sensor->dev; + + switch (trip) { + case 0: + *temp = mcelsius(sensor->cdata->crit_temp); + break; + default: + dev_err(dev, "Invalid trip point\n"); + return -EINVAL; + } + + return 0; +} + +static struct thermal_zone_device_ops st_tz_ops = { + .get_temp = st_thermal_get_temp, + .get_trip_type = st_thermal_get_trip_type, + .get_trip_temp = st_thermal_get_trip_temp, +}; + +int st_thermal_register(struct platform_device *pdev, + const struct of_device_id *st_thermal_of_match) +{ + struct st_thermal_sensor *sensor; + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + const struct of_device_id *match; + + int polling_delay; + int ret; + + if (!np) { + dev_err(dev, "device tree node not found\n"); + return -EINVAL; + } + + sensor = devm_kzalloc(dev, sizeof(*sensor), GFP_KERNEL); + if (!sensor) + return -ENOMEM; + + sensor->dev = dev; + + match = of_match_device(st_thermal_of_match, dev); + if (!(match && match->data)) + return -EINVAL; + + sensor->cdata = match->data; + if (!sensor->cdata->ops) + return -EINVAL; + + sensor->ops = sensor->cdata->ops; + + ret = sensor->ops->regmap_init(sensor); + if (ret) + return ret; + + ret = st_thermal_alloc_regfields(sensor); + if (ret) + return ret; + + sensor->clk = devm_clk_get(dev, "thermal"); + if (IS_ERR(sensor->clk)) { + dev_err(dev, "failed to fetch clock\n"); + return PTR_ERR(sensor->clk); + } + + if (sensor->ops->register_enable_irq) { + ret = sensor->ops->register_enable_irq(sensor); + if (ret) + return ret; + } + + ret = st_thermal_sensor_on(sensor); + if (ret) + return ret; + + ret = st_thermal_calibration(sensor); + if (ret) + goto sensor_off; + + polling_delay = sensor->ops->register_enable_irq ? 0 : 1000; + + sensor->thermal_dev = + thermal_zone_device_register(dev_name(dev), 1, 0, sensor, + &st_tz_ops, NULL, 0, polling_delay); + if (IS_ERR(sensor->thermal_dev)) { + dev_err(dev, "failed to register thermal zone device\n"); + ret = PTR_ERR(sensor->thermal_dev); + goto sensor_off; + } + + platform_set_drvdata(pdev, sensor); + + return 0; + +sensor_off: + st_thermal_sensor_off(sensor); + + return ret; +} +EXPORT_SYMBOL_GPL(st_thermal_register); + +int st_thermal_unregister(struct platform_device *pdev) +{ + struct st_thermal_sensor *sensor = platform_get_drvdata(pdev); + + st_thermal_sensor_off(sensor); + thermal_zone_device_unregister(sensor->thermal_dev); + + return 0; +} +EXPORT_SYMBOL_GPL(st_thermal_unregister); + +static int st_thermal_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct st_thermal_sensor *sensor = platform_get_drvdata(pdev); + + return st_thermal_sensor_off(sensor); +} + +static int st_thermal_resume(struct device *dev) +{ + int ret; + struct platform_device *pdev = to_platform_device(dev); + struct st_thermal_sensor *sensor = platform_get_drvdata(pdev); + + ret = st_thermal_sensor_on(sensor); + if (ret) + return ret; + + ret = st_thermal_calibration(sensor); + if (ret) + return ret; + + if (sensor->ops->enable_irq) { + ret = sensor->ops->enable_irq(sensor); + if (ret) + return ret; + } + + return 0; +} +SIMPLE_DEV_PM_OPS(st_thermal_pm_ops, st_thermal_suspend, st_thermal_resume); +EXPORT_SYMBOL_GPL(st_thermal_pm_ops); + +MODULE_AUTHOR("STMicroelectronics (R&D) Limited <ajitpal.singh@st.com>"); +MODULE_DESCRIPTION("STMicroelectronics STi SoC Thermal Sensor Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/thermal/st/st_thermal.h b/drivers/thermal/st/st_thermal.h new file mode 100644 index 0000000..fecafbe --- /dev/null +++ b/drivers/thermal/st/st_thermal.h @@ -0,0 +1,104 @@ +/* + * ST Thermal Sensor Driver for STi series of SoCs + * Author: Ajit Pal Singh <ajitpal.singh@st.com> + * + * Copyright (C) 2003-2014 STMicroelectronics (R&D) Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __STI_THERMAL_SYSCFG_H +#define __STI_THERMAL_SYSCFG_H + +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/thermal.h> + +enum st_thermal_regfield_ids { + INT_THRESH_HI = 0, /* Top two regfield IDs are mutually exclusive */ + TEMP_PWR = 0, + DCORRECT, + OVERFLOW, + DATA, + INT_ENABLE, + + MAX_REGFIELDS +}; + +/* Thermal sensor power states */ +enum st_thermal_power_state { + POWER_OFF = 0, + POWER_ON +}; + +struct st_thermal_sensor; + +/** + * Description of private thermal sensor ops. + * + * @power_ctrl: Function for powering on/off a sensor. Clock to the + * sensor is also controlled from this function. + * @alloc_regfields: Allocate regmap register fields, specific to a sensor. + * @do_memmap_regmap: Memory map the thermal register space and init regmap + * instance or find regmap instance. + * @register_irq: Register an interrupt handler for a sensor. + */ +struct st_thermal_sensor_ops { + int (*power_ctrl)(struct st_thermal_sensor *, enum st_thermal_power_state); + int (*alloc_regfields)(struct st_thermal_sensor *); + int (*regmap_init)(struct st_thermal_sensor *); + int (*register_enable_irq)(struct st_thermal_sensor *); + int (*enable_irq)(struct st_thermal_sensor *); +}; + +/** + * Description of thermal driver compatible data. + * + * @reg_fields: Pointer to the regfields array for a sensor. + * @sys_compat: Pointer to the syscon node compatible string. + * @ops: Pointer to private thermal ops for a sensor. + * @calibration_val: Default calibration value to be written to the DCORRECT + * register field for a sensor. + * @temp_adjust_val: Value to be added/subtracted from the data read from + * the sensor. If value needs to be added please provide a + * positive value and if it is to be subtracted please + * provide a negative value. + * @crit_temp: The temperature beyond which the SoC should be shutdown + * to prevent damage. + */ +struct st_thermal_compat_data { + char *sys_compat; + const struct reg_field *reg_fields; + const struct st_thermal_sensor_ops *ops; + unsigned int calibration_val; + int temp_adjust_val; + int crit_temp; +}; + +struct st_thermal_sensor { + struct device *dev; + struct thermal_zone_device *thermal_dev; + const struct st_thermal_sensor_ops *ops; + const struct st_thermal_compat_data *cdata; + struct clk *clk; + struct regmap *regmap; + struct regmap_field *pwr; + struct regmap_field *dcorrect; + struct regmap_field *overflow; + struct regmap_field *temp_data; + struct regmap_field *int_thresh_hi; + struct regmap_field *int_enable; + int irq; + void __iomem *mmio_base; +}; + +extern int st_thermal_register(struct platform_device *pdev, + const struct of_device_id *st_thermal_of_match); +extern int st_thermal_unregister(struct platform_device *pdev); +extern const struct dev_pm_ops st_thermal_pm_ops; + +#endif /* __STI_RESET_SYSCFG_H */ diff --git a/drivers/thermal/st/st_thermal_memmap.c b/drivers/thermal/st/st_thermal_memmap.c new file mode 100644 index 0000000..39896ce --- /dev/null +++ b/drivers/thermal/st/st_thermal_memmap.c @@ -0,0 +1,209 @@ +/* + * ST Thermal Sensor Driver for memory mapped sensors. + * Author: Ajit Pal Singh <ajitpal.singh@st.com> + * + * Copyright (C) 2003-2014 STMicroelectronics (R&D) Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/of.h> +#include <linux/module.h> + +#include "st_thermal.h" + +#define STIH416_MPE_CONF 0x0 +#define STIH416_MPE_STATUS 0x4 +#define STIH416_MPE_INT_THRESH 0x8 +#define STIH416_MPE_INT_EN 0xC + +/* Power control bits for the memory mapped thermal sensor */ +#define THERMAL_PDN BIT(4) +#define THERMAL_SRSTN BIT(10) + +static const struct reg_field st_mmap_thermal_regfields[MAX_REGFIELDS] = { + /* + * According to the STIH416 MPE temp sensor data sheet - + * the PDN (Power Down Bit) and SRSTN (Soft Reset Bit) need to be + * written simultaneously for powering on and off the temperature + * sensor. regmap_update_bits() will be used to update the register. + */ + [INT_THRESH_HI] = REG_FIELD(STIH416_MPE_INT_THRESH, 0, 7), + [DCORRECT] = REG_FIELD(STIH416_MPE_CONF, 5, 9), + [OVERFLOW] = REG_FIELD(STIH416_MPE_STATUS, 9, 9), + [DATA] = REG_FIELD(STIH416_MPE_STATUS, 11, 18), + [INT_ENABLE] = REG_FIELD(STIH416_MPE_INT_EN, 0, 0), +}; + +static irqreturn_t st_mmap_thermal_trip_handler(int irq, void *sdata) +{ + struct st_thermal_sensor *sensor = sdata; + + thermal_zone_device_update(sensor->thermal_dev); + + return IRQ_HANDLED; +} + +/* Private ops for the Memory Mapped based thermal sensors */ +static int st_mmap_power_ctrl(struct st_thermal_sensor *sensor, + enum st_thermal_power_state power_state) +{ + const unsigned int mask = (THERMAL_PDN | THERMAL_SRSTN); + const unsigned int val = power_state ? mask : 0; + + return regmap_update_bits(sensor->regmap, STIH416_MPE_CONF, mask, val); +} + +static int st_mmap_alloc_regfields(struct st_thermal_sensor *sensor) +{ + struct device *dev = sensor->dev; + struct regmap *regmap = sensor->regmap; + const struct reg_field *reg_fields = sensor->cdata->reg_fields; + + sensor->int_thresh_hi = devm_regmap_field_alloc(dev, regmap, + reg_fields[INT_THRESH_HI]); + sensor->int_enable = devm_regmap_field_alloc(dev, regmap, + reg_fields[INT_ENABLE]); + + if (IS_ERR(sensor->int_thresh_hi) || IS_ERR(sensor->int_enable)) { + dev_err(dev, "failed to alloc mmap regfields\n"); + return -EINVAL; + } + + return 0; +} + +static int st_mmap_enable_irq(struct st_thermal_sensor *sensor) +{ + int ret; + + /* Set upper critical threshold */ + ret = regmap_field_write(sensor->int_thresh_hi, + sensor->cdata->crit_temp - + sensor->cdata->temp_adjust_val); + if (ret) + return ret; + + return regmap_field_write(sensor->int_enable, 1); +} + +static int st_mmap_register_enable_irq(struct st_thermal_sensor *sensor) +{ + struct device *dev = sensor->dev; + struct platform_device *pdev = to_platform_device(dev); + int ret; + + sensor->irq = platform_get_irq(pdev, 0); + if (sensor->irq < 0) { + dev_err(dev, "failed to register IRQ\n"); + return sensor->irq; + } + + ret = devm_request_threaded_irq(dev, sensor->irq, + NULL, st_mmap_thermal_trip_handler, + IRQF_TRIGGER_RISING | IRQF_ONESHOT, + dev->driver->name, sensor); + if (ret) { + dev_err(dev, "failed to register IRQ %d\n", sensor->irq); + return ret; + } + + return st_mmap_enable_irq(sensor); +} + +static const struct regmap_config st_416mpe_regmap_config = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, +}; + +static int st_mmap_regmap_init(struct st_thermal_sensor *sensor) +{ + struct device *dev = sensor->dev; + struct platform_device *pdev = to_platform_device(dev); + struct resource *res; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(dev, "no memory resources defined\n"); + return -ENODEV; + } + + sensor->mmio_base = devm_ioremap_resource(dev, res); + if (IS_ERR(sensor->mmio_base)) { + dev_err(dev, "failed to remap IO\n"); + return PTR_ERR(sensor->mmio_base); + } + + sensor->regmap = devm_regmap_init_mmio(dev, sensor->mmio_base, + &st_416mpe_regmap_config); + if (IS_ERR(sensor->regmap)) { + dev_err(dev, "failed to initialise regmap\n"); + return PTR_ERR(sensor->regmap); + } + + return 0; +} + +static const struct st_thermal_sensor_ops st_mmap_sensor_ops = { + .power_ctrl = st_mmap_power_ctrl, + .alloc_regfields = st_mmap_alloc_regfields, + .regmap_init = st_mmap_regmap_init, + .register_enable_irq = st_mmap_register_enable_irq, + .enable_irq = st_mmap_enable_irq, +}; + +/* Compatible device data stih416 mpe thermal sensor */ +const struct st_thermal_compat_data st_416mpe_cdata = { + .reg_fields = st_mmap_thermal_regfields, + .ops = &st_mmap_sensor_ops, + .calibration_val = 14, + .temp_adjust_val = -95, + .crit_temp = 120, +}; + +/* Compatible device data stih407 thermal sensor */ +const struct st_thermal_compat_data st_407_cdata = { + .reg_fields = st_mmap_thermal_regfields, + .ops = &st_mmap_sensor_ops, + .calibration_val = 16, + .temp_adjust_val = -95, + .crit_temp = 120, +}; + +static struct of_device_id st_mmap_thermal_of_match[] = { + { .compatible = "st,stih416-mpe-thermal", .data = &st_416mpe_cdata }, + { .compatible = "st,stih407-thermal", .data = &st_407_cdata }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, st_mmap_thermal_of_match); + +int st_mmap_probe(struct platform_device *pdev) +{ + return st_thermal_register(pdev, st_mmap_thermal_of_match); +} + +int st_mmap_remove(struct platform_device *pdev) +{ + return st_thermal_unregister(pdev); +} + +static struct platform_driver st_mmap_thermal_driver = { + .driver = { + .name = "st_thermal_mmap", + .owner = THIS_MODULE, + .pm = &st_thermal_pm_ops, + .of_match_table = st_mmap_thermal_of_match, + }, + .probe = st_mmap_probe, + .remove = st_mmap_remove, +}; + +module_platform_driver(st_mmap_thermal_driver); + +MODULE_AUTHOR("STMicroelectronics (R&D) Limited <ajitpal.singh@st.com>"); +MODULE_DESCRIPTION("STMicroelectronics STi SoC Thermal Sensor Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/thermal/st/st_thermal_syscfg.c b/drivers/thermal/st/st_thermal_syscfg.c new file mode 100644 index 0000000..888b58e --- /dev/null +++ b/drivers/thermal/st/st_thermal_syscfg.c @@ -0,0 +1,179 @@ +/* + * ST Thermal Sensor Driver for syscfg based sensors. + * Author: Ajit Pal Singh <ajitpal.singh@st.com> + * + * Copyright (C) 2003-2014 STMicroelectronics (R&D) Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/of.h> +#include <linux/module.h> +#include <linux/mfd/syscon.h> + +#include "st_thermal.h" + +/* STiH415 */ +#define STIH415_SYSCFG_FRONT(num) ((num - 100) * 4) +#define STIH415_SAS_THSENS_CONF STIH415_SYSCFG_FRONT(178) +#define STIH415_SAS_THSENS_STATUS STIH415_SYSCFG_FRONT(198) +#define STIH415_SYSCFG_MPE(num) ((num - 600) * 4) +#define STIH415_MPE_THSENS_CONF STIH415_SYSCFG_MPE(607) +#define STIH415_MPE_THSENS_STATUS STIH415_SYSCFG_MPE(667) + +/* STiH416 */ +#define STIH416_SYSCFG_FRONT(num) ((num - 1000) * 4) +#define STIH416_SAS_THSENS_CONF STIH416_SYSCFG_FRONT(1552) +#define STIH416_SAS_THSENS_STATUS1 STIH416_SYSCFG_FRONT(1554) +#define STIH416_SAS_THSENS_STATUS2 STIH416_SYSCFG_FRONT(1594) + +/* STiD127 */ +#define STID127_SYSCFG_CPU(num) ((num - 700) * 4) +#define STID127_THSENS_CONF STID127_SYSCFG_CPU(743) +#define STID127_THSENS_STATUS STID127_SYSCFG_CPU(767) + +static const struct reg_field st_415sas_regfields[MAX_REGFIELDS] = { + [TEMP_PWR] = REG_FIELD(STIH415_SAS_THSENS_CONF, 9, 9), + [DCORRECT] = REG_FIELD(STIH415_SAS_THSENS_CONF, 4, 8), + [OVERFLOW] = REG_FIELD(STIH415_SAS_THSENS_STATUS, 8, 8), + [DATA] = REG_FIELD(STIH415_SAS_THSENS_STATUS, 10, 16), +}; + +static const struct reg_field st_415mpe_regfields[MAX_REGFIELDS] = { + [TEMP_PWR] = REG_FIELD(STIH415_MPE_THSENS_CONF, 8, 8), + [DCORRECT] = REG_FIELD(STIH415_MPE_THSENS_CONF, 3, 7), + [OVERFLOW] = REG_FIELD(STIH415_MPE_THSENS_STATUS, 9, 9), + [DATA] = REG_FIELD(STIH415_MPE_THSENS_STATUS, 11, 18), +}; + +static const struct reg_field st_416sas_regfields[MAX_REGFIELDS] = { + [TEMP_PWR] = REG_FIELD(STIH416_SAS_THSENS_CONF, 9, 9), + [DCORRECT] = REG_FIELD(STIH416_SAS_THSENS_CONF, 4, 8), + [OVERFLOW] = REG_FIELD(STIH416_SAS_THSENS_STATUS1, 8, 8), + [DATA] = REG_FIELD(STIH416_SAS_THSENS_STATUS2, 10, 16), +}; + +static const struct reg_field st_127_regfields[MAX_REGFIELDS] = { + [TEMP_PWR] = REG_FIELD(STID127_THSENS_CONF, 7, 7), + [DCORRECT] = REG_FIELD(STID127_THSENS_CONF, 2, 6), + [OVERFLOW] = REG_FIELD(STID127_THSENS_STATUS, 9, 9), + [DATA] = REG_FIELD(STID127_THSENS_STATUS, 11, 18), +}; + +/* Private OPs for System Configuration Register based thermal sensors */ +static int st_syscfg_power_ctrl(struct st_thermal_sensor *sensor, + enum st_thermal_power_state power_state) +{ + return regmap_field_write(sensor->pwr, power_state); +} + +static int st_syscfg_alloc_regfields(struct st_thermal_sensor *sensor) +{ + struct device *dev = sensor->dev; + + sensor->pwr = devm_regmap_field_alloc(dev, sensor->regmap, + sensor->cdata->reg_fields[TEMP_PWR]); + + if (IS_ERR(sensor->pwr)) { + dev_err(dev, "failed to alloc syscfg regfields\n"); + return PTR_ERR(sensor->pwr); + } + + return 0; +} + +static int st_syscfg_regmap_init(struct st_thermal_sensor *sensor) +{ + sensor->regmap = + syscon_regmap_lookup_by_compatible(sensor->cdata->sys_compat); + if (IS_ERR(sensor->regmap)) { + dev_err(sensor->dev, "failed to find syscfg regmap\n"); + return PTR_ERR(sensor->regmap); + } + + return 0; +} + +static const struct st_thermal_sensor_ops st_syscfg_sensor_ops = { + .power_ctrl = st_syscfg_power_ctrl, + .alloc_regfields = st_syscfg_alloc_regfields, + .regmap_init = st_syscfg_regmap_init, +}; + +/* Compatible device data for stih415 sas thermal sensor */ +const struct st_thermal_compat_data st_415sas_cdata = { + .sys_compat = "st,stih415-front-syscfg", + .reg_fields = st_415sas_regfields, + .ops = &st_syscfg_sensor_ops, + .calibration_val = 16, + .temp_adjust_val = 20, + .crit_temp = 120, +}; + +/* Compatible device data for stih415 mpe thermal sensor */ +const struct st_thermal_compat_data st_415mpe_cdata = { + .sys_compat = "st,stih415-system-syscfg", + .reg_fields = st_415mpe_regfields, + .ops = &st_syscfg_sensor_ops, + .calibration_val = 16, + .temp_adjust_val = -103, + .crit_temp = 120, +}; + +/* Compatible device data for stih416 sas thermal sensor */ +const struct st_thermal_compat_data st_416sas_cdata = { + .sys_compat = "st,stih416-front-syscfg", + .reg_fields = st_416sas_regfields, + .ops = &st_syscfg_sensor_ops, + .calibration_val = 16, + .temp_adjust_val = 20, + .crit_temp = 120, +}; + +/* Compatible device data for stid127 thermal sensor */ +const struct st_thermal_compat_data st_127_cdata = { + .sys_compat = "st,stid127-cpu-syscfg", + .reg_fields = st_127_regfields, + .ops = &st_syscfg_sensor_ops, + .calibration_val = 8, + .temp_adjust_val = -103, + .crit_temp = 120, +}; + +static struct of_device_id st_syscfg_thermal_of_match[] = { + { .compatible = "st,stih415-sas-thermal", .data = &st_415sas_cdata }, + { .compatible = "st,stih415-mpe-thermal", .data = &st_415mpe_cdata }, + { .compatible = "st,stih416-sas-thermal", .data = &st_416sas_cdata }, + { .compatible = "st,stid127-thermal", .data = &st_127_cdata }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, st_syscfg_thermal_of_match); + +int st_syscfg_probe(struct platform_device *pdev) +{ + return st_thermal_register(pdev, st_syscfg_thermal_of_match); +} + +int st_syscfg_remove(struct platform_device *pdev) +{ + return st_thermal_unregister(pdev); +} + +static struct platform_driver st_syscfg_thermal_driver = { + .driver = { + .name = "st_syscfg_thermal", + .owner = THIS_MODULE, + .pm = &st_thermal_pm_ops, + .of_match_table = st_syscfg_thermal_of_match, + }, + .probe = st_syscfg_probe, + .remove = st_syscfg_remove, +}; +module_platform_driver(st_syscfg_thermal_driver); + +MODULE_AUTHOR("STMicroelectronics (R&D) Limited <ajitpal.singh@st.com>"); +MODULE_DESCRIPTION("STMicroelectronics STi SoC Thermal Sensor Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/thermal.h b/include/linux/thermal.h index f7e11c7..0305cde 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -158,6 +158,42 @@ struct thermal_attr { char name[THERMAL_NAME_LENGTH]; }; +/** + * struct thermal_zone_device - structure for a thermal zone + * @id: unique id number for each thermal zone + * @type: the thermal zone device type + * @device: &struct device for this thermal zone + * @trip_temp_attrs: attributes for trip points for sysfs: trip temperature + * @trip_type_attrs: attributes for trip points for sysfs: trip type + * @trip_hyst_attrs: attributes for trip points for sysfs: trip hysteresis + * @devdata: private pointer for device private data + * @trips: number of trip points the thermal zone supports + * @passive_delay: number of milliseconds to wait between polls when + * performing passive cooling. Currenty only used by the + * step-wise governor + * @polling_delay: number of milliseconds to wait between polls when + * checking whether trip points have been crossed (0 for + * interrupt driven systems) + * @temperature: current temperature. This is only for core code, + * drivers should use thermal_zone_get_temp() to get the + * current temperature + * @last_temperature: previous temperature read + * @emul_temperature: emulated temperature when using CONFIG_THERMAL_EMULATION + * @passive: 1 if you've crossed a passive trip point, 0 otherwise. + * Currenty only used by the step-wise governor. + * @forced_passive: If > 0, temperature at which to switch on all ACPI + * processor cooling devices. Currently only used by the + * step-wise governor. + * @ops: operations this &thermal_zone_device supports + * @tzp: thermal zone parameters + * @governor: pointer to the governor for this thermal zone + * @thermal_instances: list of &struct thermal_instance of this thermal zone + * @idr: &struct idr to generate unique id for this zone's cooling + * devices + * @lock: lock to protect thermal_instances list + * @node: node in thermal_tz_list (in thermal_core.c) + * @poll_queue: delayed work for polling + */ struct thermal_zone_device { int id; char type[THERMAL_NAME_LENGTH]; @@ -179,12 +215,18 @@ struct thermal_zone_device { struct thermal_governor *governor; struct list_head thermal_instances; struct idr idr; - struct mutex lock; /* protect thermal_instances list */ + struct mutex lock; struct list_head node; struct delayed_work poll_queue; }; -/* Structure that holds thermal governor information */ +/** + * struct thermal_governor - structure that holds thermal governor information + * @name: name of the governor + * @throttle: callback called for every trip point even if temperature is + * below the trip point temperature + * @governor_list: node in thermal_governor_list (in thermal_core.c) + */ struct thermal_governor { char name[THERMAL_NAME_LENGTH]; int (*throttle)(struct thermal_zone_device *tz, int trip); |
