diff options
| -rw-r--r-- | Documentation/devicetree/bindings/regulator/lp872x.txt | 160 | ||||
| -rw-r--r-- | drivers/regulator/lp872x.c | 116 |
2 files changed, 274 insertions, 2 deletions
diff --git a/Documentation/devicetree/bindings/regulator/lp872x.txt b/Documentation/devicetree/bindings/regulator/lp872x.txt new file mode 100644 index 0000000..7818318 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/lp872x.txt @@ -0,0 +1,160 @@ +Binding for TI/National Semiconductor LP872x Driver + +Required properties: + - compatible: "ti,lp8720" or "ti,lp8725" + - reg: I2C slave address. 0x7d = LP8720, 0x7a = LP8725 + +Optional properties: + - ti,general-config: the value of LP872X_GENERAL_CFG register (u8) + (LP8720) + bit[2]: BUCK output voltage control by external DVS pin or register + 1 = external pin, 0 = bit7 of register 08h + bit[1]: sleep control by external DVS pin or register + 1 = external pin, 0 = bit6 of register 08h + bit[0]: time step unit(usec). 1 = 25, 0 = 50 + + (LP8725) + bit[7:6]: time step unit(usec). 00 = 32, 01 = 64, 10 = 128, 11 = 256 + bit[4]: BUCK2 enable control. 1 = enable, 0 = disable + bit[3]: BUCK2 output voltage register address. 1 = 0Ah, 0 = 0Bh + bit[2]: BUCK1 output voltage control by external DVS pin or register + 1 = register 08h, 0 = DVS + bit[1]: LDO sleep control. 1 = sleep mode, 0 = normal + bit[0]: BUCK1 enable control, 1 = enable, 0 = disable + + For more details, please see the datasheet. + + - ti,update-config: define it when LP872X_GENERAL_CFG register should be set + - ti,dvs-gpio: GPIO specifier for external DVS pin control of LP872x devices. + - ti,dvs-vsel: DVS selector. 0 = SEL_V1, 1 = SEL_V2. + - ti,dvs-state: initial DVS pin state. 0 = DVS_LOW, 1 = DVS_HIGH. + + Sub nodes for regulator_init_data + LP8720 has maximum 6 nodes. (child name: ldo1 ~ 5 and buck) + LP8725 has maximum 9 nodes. (child name: ldo1 ~ 5, lilo1,2 and buck1,2) + For more details, please see the following binding document. + (Documentation/devicetree/bindings/regulator/regulator.txt) + +Datasheet + - LP8720: http://www.ti.com/lit/ds/symlink/lp8720.pdf + - LP8725: http://www.ti.com/lit/ds/symlink/lp8725.pdf + +Example 1) LP8720 + +lp8720@7d { + compatible = "ti,lp8720"; + reg = <0x7d>; + + /* external DVS pin used, timestep is 25usec */ + ti,general-config = /bits/ 8 <0x03>; + ti,update-config; + + /* + * The dvs-gpio depends on the processor environment. + * For example, following GPIO specifier means GPIO134 in OMAP4. + */ + ti,dvs-gpio = <&gpio5 6 0>; + ti,dvs-vsel = /bits/ 8 <1>; /* SEL_V2 */ + ti,dvs-state = /bits/ 8 <1>; /* DVS_HIGH */ + + vaf: ldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + }; + + vmmc: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + }; + + vcam_io: ldo3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + vcam_core: ldo4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <2850000>; + regulator-boot-on; + }; + + vcam: ldo5 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + }; + + vcc: buck { + regulator-name = "VBUCK"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <2300000>; + }; +}; + +Example 2) LP8725 + +lp8725@7a { + compatible = "ti,lp8725"; + reg = <0x7a>; + + /* Enable BUCK1,2, no DVS, normal LDO mode, timestep is 256usec */ + ti,general-config = /bits/ 8 <0xdd>; + ti,update-config; + + vcam_io: ldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + }; + + vcam_core: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + }; + + vcam: ldo3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + }; + + vcmmb_io: ldo4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + vcmmb_core: ldo5 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + vaux1: lilo1 { + regulator-name = "VAUX1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + vaux2: lilo2 { + regulator-name = "VAUX2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + vcc1: buck1 { + regulator-name = "VBUCK1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3000000>; + regulator-min-microamp = <460000>; + regulator-max-microamp = <1370000>; + regulator-boot-on; + }; + + vcc2: buck2 { + regulator-name = "VBUCK2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3000000>; + regulator-min-microamp = <460000>; + regulator-max-microamp = <1370000>; + regulator-boot-on; + }; +}; diff --git a/drivers/regulator/lp872x.c b/drivers/regulator/lp872x.c index f5fc4a1..b16336b 100644 --- a/drivers/regulator/lp872x.c +++ b/drivers/regulator/lp872x.c @@ -18,6 +18,9 @@ #include <linux/regulator/lp872x.h> #include <linux/regulator/driver.h> #include <linux/platform_device.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/regulator/of_regulator.h> /* Registers : LP8720/8725 shared */ #define LP872X_GENERAL_CFG 0x00 @@ -723,8 +726,8 @@ static int lp872x_init_dvs(struct lp872x *lp) gpio = dvs->gpio; if (!gpio_is_valid(gpio)) { - dev_err(lp->dev, "invalid gpio: %d\n", gpio); - return -EINVAL; + dev_warn(lp->dev, "invalid gpio: %d\n", gpio); + goto set_default_dvs_mode; } pinstate = dvs->init_state; @@ -829,6 +832,103 @@ static const struct regmap_config lp872x_regmap_config = { .max_register = MAX_REGISTERS, }; +#ifdef CONFIG_OF + +#define LP872X_VALID_OPMODE (REGULATOR_MODE_FAST | REGULATOR_MODE_NORMAL) + +static struct of_regulator_match lp8720_matches[] = { + { .name = "ldo1", .driver_data = (void *)LP8720_ID_LDO1, }, + { .name = "ldo2", .driver_data = (void *)LP8720_ID_LDO2, }, + { .name = "ldo3", .driver_data = (void *)LP8720_ID_LDO3, }, + { .name = "ldo4", .driver_data = (void *)LP8720_ID_LDO4, }, + { .name = "ldo5", .driver_data = (void *)LP8720_ID_LDO5, }, + { .name = "buck", .driver_data = (void *)LP8720_ID_BUCK, }, +}; + +static struct of_regulator_match lp8725_matches[] = { + { .name = "ldo1", .driver_data = (void *)LP8725_ID_LDO1, }, + { .name = "ldo2", .driver_data = (void *)LP8725_ID_LDO2, }, + { .name = "ldo3", .driver_data = (void *)LP8725_ID_LDO3, }, + { .name = "ldo4", .driver_data = (void *)LP8725_ID_LDO4, }, + { .name = "ldo5", .driver_data = (void *)LP8725_ID_LDO5, }, + { .name = "lilo1", .driver_data = (void *)LP8725_ID_LILO1, }, + { .name = "lilo2", .driver_data = (void *)LP8725_ID_LILO2, }, + { .name = "buck1", .driver_data = (void *)LP8725_ID_BUCK1, }, + { .name = "buck2", .driver_data = (void *)LP8725_ID_BUCK2, }, +}; + +static struct lp872x_platform_data +*lp872x_populate_pdata_from_dt(struct device *dev, enum lp872x_id which) +{ + struct device_node *np = dev->of_node; + struct lp872x_platform_data *pdata; + struct of_regulator_match *match; + struct regulator_init_data *d; + int num_matches; + int count; + int i; + u8 dvs_state; + + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + goto out; + + of_property_read_u8(np, "ti,general-config", &pdata->general_config); + if (of_find_property(np, "ti,update-config", NULL)) + pdata->update_config = true; + + pdata->dvs = devm_kzalloc(dev, sizeof(struct lp872x_dvs), GFP_KERNEL); + if (!pdata->dvs) + goto out; + + pdata->dvs->gpio = of_get_named_gpio(np, "ti,dvs-gpio", 0); + of_property_read_u8(np, "ti,dvs-vsel", (u8 *)&pdata->dvs->vsel); + of_property_read_u8(np, "ti,dvs-state", &dvs_state); + pdata->dvs->init_state = dvs_state ? DVS_HIGH : DVS_LOW; + + if (of_get_child_count(np) == 0) + goto out; + + switch (which) { + case LP8720: + match = lp8720_matches; + num_matches = ARRAY_SIZE(lp8720_matches); + break; + case LP8725: + match = lp8725_matches; + num_matches = ARRAY_SIZE(lp8725_matches); + break; + default: + goto out; + } + + count = of_regulator_match(dev, np, match, num_matches); + if (count <= 0) + goto out; + + for (i = 0; i < num_matches; i++) { + pdata->regulator_data[i].id = (int)match[i].driver_data; + pdata->regulator_data[i].init_data = match[i].init_data; + + /* Operation mode configuration for buck/buck1/buck2 */ + if (strncmp(match[i].name, "buck", 4)) + continue; + + d = pdata->regulator_data[i].init_data; + d->constraints.valid_modes_mask |= LP872X_VALID_OPMODE; + d->constraints.valid_ops_mask |= REGULATOR_CHANGE_MODE; + } +out: + return pdata; +} +#else +static struct lp872x_platform_data +*lp872x_populate_pdata_from_dt(struct device *dev, enum lp872x_id which) +{ + return NULL; +} +#endif + static int lp872x_probe(struct i2c_client *cl, const struct i2c_device_id *id) { struct lp872x *lp; @@ -838,6 +938,10 @@ static int lp872x_probe(struct i2c_client *cl, const struct i2c_device_id *id) [LP8725] = LP8725_NUM_REGULATORS, }; + if (cl->dev.of_node) + cl->dev.platform_data = lp872x_populate_pdata_from_dt(&cl->dev, + (enum lp872x_id)id->driver_data); + lp = devm_kzalloc(&cl->dev, sizeof(struct lp872x), GFP_KERNEL); if (!lp) goto err_mem; @@ -882,6 +986,13 @@ static int lp872x_remove(struct i2c_client *cl) return 0; } +static const struct of_device_id lp872x_dt_ids[] = { + { .compatible = "ti,lp8720", }, + { .compatible = "ti,lp8725", }, + { } +}; +MODULE_DEVICE_TABLE(of, lp872x_dt_ids); + static const struct i2c_device_id lp872x_ids[] = { {"lp8720", LP8720}, {"lp8725", LP8725}, @@ -893,6 +1004,7 @@ static struct i2c_driver lp872x_driver = { .driver = { .name = "lp872x", .owner = THIS_MODULE, + .of_match_table = of_match_ptr(lp872x_dt_ids), }, .probe = lp872x_probe, .remove = lp872x_remove, |
