diff options
| -rw-r--r-- | drivers/scsi/advansys.c | 40 |
1 files changed, 16 insertions, 24 deletions
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c index e2bd4c9..0f309e8 100644 --- a/drivers/scsi/advansys.c +++ b/drivers/scsi/advansys.c @@ -459,14 +459,22 @@ typedef struct asc_risc_sg_list_q { #define ASC_WARN_CFG_MSW_RECOVER 0x0040 /* - * Error code values are set in ASC_DVC_VAR 'err_code'. - */ -#define ASC_IERR_MCODE_CHKSUM 0x0002 -#define ASC_IERR_SET_PC_ADDR 0x0004 -#define ASC_IERR_START_STOP_CHIP 0x0008 -#define ASC_IERR_SET_SCSI_ID 0x0080 -#define ASC_IERR_BAD_SIGNATURE 0x0200 -#define ASC_IERR_NO_BUS_TYPE 0x0400 + * Error code values are set in {ASC/ADV}_DVC_VAR 'err_code'. + */ +#define ASC_IERR_NO_CARRIER 0x0001 /* No more carrier memory */ +#define ASC_IERR_MCODE_CHKSUM 0x0002 /* micro code check sum error */ +#define ASC_IERR_SET_PC_ADDR 0x0004 +#define ASC_IERR_START_STOP_CHIP 0x0008 /* start/stop chip failed */ +#define ASC_IERR_ILLEGAL_CONNECTION 0x0010 /* Illegal cable connection */ +#define ASC_IERR_SINGLE_END_DEVICE 0x0020 /* SE device on DIFF bus */ +#define ASC_IERR_REVERSED_CABLE 0x0040 /* Narrow flat cable reversed */ +#define ASC_IERR_SET_SCSI_ID 0x0080 /* set SCSI ID failed */ +#define ASC_IERR_HVD_DEVICE 0x0100 /* HVD device on LVD port */ +#define ASC_IERR_BAD_SIGNATURE 0x0200 /* signature not found */ +#define ASC_IERR_NO_BUS_TYPE 0x0400 +#define ASC_IERR_BIST_PRE_TEST 0x0800 /* BIST pre-test error */ +#define ASC_IERR_BIST_RAM_TEST 0x1000 /* BIST RAM test error */ +#define ASC_IERR_BAD_CHIPTYPE 0x2000 /* Invalid chip_type setting */ #define ASC_DEF_MAX_TOTAL_QNG (0xF0) #define ASC_MIN_TAG_Q_PER_DVC (0x04) @@ -1698,22 +1706,6 @@ typedef struct adveep_38C1600_config { #define ADV_MAX_LUN 7 /* max. logical unit number */ /* - * Error code values are set in ADV_DVC_VAR 'err_code'. - */ -#define ASC_IERR_MCODE_CHKSUM 0x0002 /* micro code check sum error */ -#define ASC_IERR_NO_CARRIER 0x0004 /* No more carrier memory. */ -#define ASC_IERR_START_STOP_CHIP 0x0008 /* start/stop chip failed */ -#define ASC_IERR_SET_SCSI_ID 0x0080 /* set SCSI ID failed */ -#define ASC_IERR_HVD_DEVICE 0x0100 /* HVD attached to LVD connector. */ -#define ASC_IERR_BAD_SIGNATURE 0x0200 /* signature not found */ -#define ASC_IERR_ILLEGAL_CONNECTION 0x0400 /* Illegal cable connection */ -#define ASC_IERR_SINGLE_END_DEVICE 0x0800 /* Single-end used w/differential */ -#define ASC_IERR_REVERSED_CABLE 0x1000 /* Narrow flat cable reversed */ -#define ASC_IERR_BIST_PRE_TEST 0x2000 /* BIST pre-test error */ -#define ASC_IERR_BIST_RAM_TEST 0x4000 /* BIST RAM test error */ -#define ASC_IERR_BAD_CHIPTYPE 0x8000 /* Invalid 'chip_type' setting. */ - -/* * Fixed locations of microcode operating variables. */ #define ASC_MC_CODE_BEGIN_ADDR 0x0028 /* microcode start address */ |
