summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--arch/arm/mach-omap1/board-ams-delta.c10
-rw-r--r--arch/arm/plat-omap/include/plat/board-ams-delta.h2
-rw-r--r--drivers/input/serio/ams_delta_serio.c56
3 files changed, 35 insertions, 33 deletions
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 3aba8f9..673cf21 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -227,16 +227,6 @@ static struct gpio latch_gpios[] __initconst = {
.label = "dockit2",
},
{
- .gpio = AMS_DELTA_GPIO_PIN_KEYBRD_PWR,
- .flags = GPIOF_OUT_INIT_LOW,
- .label = "keybrd_pwr",
- },
- {
- .gpio = AMS_DELTA_GPIO_PIN_KEYBRD_DATAOUT,
- .flags = GPIOF_OUT_INIT_LOW,
- .label = "keybrd_dataout",
- },
- {
.gpio = AMS_DELTA_GPIO_PIN_SCARD_RSTIN,
.flags = GPIOF_OUT_INIT_LOW,
.label = "scard_rstin",
diff --git a/arch/arm/plat-omap/include/plat/board-ams-delta.h b/arch/arm/plat-omap/include/plat/board-ams-delta.h
index e9ad673..027e79e 100644
--- a/arch/arm/plat-omap/include/plat/board-ams-delta.h
+++ b/arch/arm/plat-omap/include/plat/board-ams-delta.h
@@ -28,8 +28,6 @@
#if defined (CONFIG_MACH_AMS_DELTA)
-#define AMD_DELTA_LATCH2_KEYBRD_PWR 0x0100
-#define AMD_DELTA_LATCH2_KEYBRD_DATA 0x0200
#define AMD_DELTA_LATCH2_SCARD_RSTIN 0x0400
#define AMD_DELTA_LATCH2_SCARD_CMDVCC 0x0800
#define AMS_DELTA_LATCH2_MODEM_NRESET 0x1000
diff --git a/drivers/input/serio/ams_delta_serio.c b/drivers/input/serio/ams_delta_serio.c
index 835d37a..0571e2e 100644
--- a/drivers/input/serio/ams_delta_serio.c
+++ b/drivers/input/serio/ams_delta_serio.c
@@ -92,8 +92,7 @@ static irqreturn_t ams_delta_serio_interrupt(int irq, void *dev_id)
static int ams_delta_serio_open(struct serio *serio)
{
/* enable keyboard */
- ams_delta_latch2_write(AMD_DELTA_LATCH2_KEYBRD_PWR,
- AMD_DELTA_LATCH2_KEYBRD_PWR);
+ gpio_set_value(AMS_DELTA_GPIO_PIN_KEYBRD_PWR, 1);
return 0;
}
@@ -101,9 +100,32 @@ static int ams_delta_serio_open(struct serio *serio)
static void ams_delta_serio_close(struct serio *serio)
{
/* disable keyboard */
- ams_delta_latch2_write(AMD_DELTA_LATCH2_KEYBRD_PWR, 0);
+ gpio_set_value(AMS_DELTA_GPIO_PIN_KEYBRD_PWR, 0);
}
+static struct gpio ams_delta_gpios[] __initconst_or_module = {
+ {
+ .gpio = AMS_DELTA_GPIO_PIN_KEYBRD_DATA,
+ .flags = GPIOF_DIR_IN,
+ .label = "serio-data",
+ },
+ {
+ .gpio = AMS_DELTA_GPIO_PIN_KEYBRD_CLK,
+ .flags = GPIOF_DIR_IN,
+ .label = "serio-clock",
+ },
+ {
+ .gpio = AMS_DELTA_GPIO_PIN_KEYBRD_PWR,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "serio-power",
+ },
+ {
+ .gpio = AMS_DELTA_GPIO_PIN_KEYBRD_DATAOUT,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "serio-dataout",
+ },
+};
+
static int __init ams_delta_serio_init(void)
{
int err;
@@ -123,19 +145,12 @@ static int __init ams_delta_serio_init(void)
strlcpy(ams_delta_serio->phys, "GPIO/serio0",
sizeof(ams_delta_serio->phys));
- err = gpio_request(AMS_DELTA_GPIO_PIN_KEYBRD_DATA, "serio-data");
+ err = gpio_request_array(ams_delta_gpios,
+ ARRAY_SIZE(ams_delta_gpios));
if (err) {
- pr_err("ams_delta_serio: Couldn't request gpio pin for data\n");
+ pr_err("ams_delta_serio: Couldn't request gpio pins\n");
goto serio;
}
- gpio_direction_input(AMS_DELTA_GPIO_PIN_KEYBRD_DATA);
-
- err = gpio_request(AMS_DELTA_GPIO_PIN_KEYBRD_CLK, "serio-clock");
- if (err) {
- pr_err("ams_delta_serio: couldn't request gpio pin for clock\n");
- goto gpio_data;
- }
- gpio_direction_input(AMS_DELTA_GPIO_PIN_KEYBRD_CLK);
err = request_irq(gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK),
ams_delta_serio_interrupt, IRQ_TYPE_EDGE_RISING,
@@ -143,7 +158,7 @@ static int __init ams_delta_serio_init(void)
if (err < 0) {
pr_err("ams_delta_serio: couldn't request gpio interrupt %d\n",
gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK));
- goto gpio_clk;
+ goto gpio;
}
/*
* Since GPIO register handling for keyboard clock pin is performed
@@ -157,21 +172,20 @@ static int __init ams_delta_serio_init(void)
dev_info(&ams_delta_serio->dev, "%s\n", ams_delta_serio->name);
return 0;
-gpio_clk:
- gpio_free(AMS_DELTA_GPIO_PIN_KEYBRD_CLK);
-gpio_data:
- gpio_free(AMS_DELTA_GPIO_PIN_KEYBRD_DATA);
+gpio:
+ gpio_free_array(ams_delta_gpios,
+ ARRAY_SIZE(ams_delta_gpios));
serio:
kfree(ams_delta_serio);
return err;
}
-late_initcall(ams_delta_serio_init);
+module_init(ams_delta_serio_init);
static void __exit ams_delta_serio_exit(void)
{
serio_unregister_port(ams_delta_serio);
free_irq(OMAP_GPIO_IRQ(AMS_DELTA_GPIO_PIN_KEYBRD_CLK), 0);
- gpio_free(AMS_DELTA_GPIO_PIN_KEYBRD_CLK);
- gpio_free(AMS_DELTA_GPIO_PIN_KEYBRD_DATA);
+ gpio_free_array(ams_delta_gpios,
+ ARRAY_SIZE(ams_delta_gpios));
}
module_exit(ams_delta_serio_exit);
OpenPOWER on IntegriCloud