summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/arm/mach-omap2/cpuidle34xx.c6
-rw-r--r--arch/arm/mach-omap2/pm24xx.c2
-rw-r--r--arch/arm/mach-omap2/pm34xx.c11
-rw-r--r--arch/arm/mach-omap2/serial.c22
-rw-r--r--arch/arm/plat-omap/include/plat/omap-serial.h6
-rw-r--r--drivers/tty/serial/omap-serial.c36
6 files changed, 41 insertions, 42 deletions
diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c
index e20332f..3a9d2b8 100644
--- a/arch/arm/mach-omap2/cpuidle34xx.c
+++ b/arch/arm/mach-omap2/cpuidle34xx.c
@@ -30,7 +30,6 @@
#include <plat/irqs.h>
#include "powerdomain.h"
#include "clockdomain.h"
-#include <plat/serial.h>
#include "pm.h"
#include "control.h"
@@ -245,11 +244,6 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev,
struct omap3_idle_statedata *cx;
int ret;
- if (!omap3_can_sleep()) {
- new_state_idx = drv->safe_state_index;
- goto select_state;
- }
-
/*
* Prevent idle completely if CAM is active.
* CAM does not have wakeup capability in OMAP3.
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index 22af2f2..b8822f8 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -222,8 +222,6 @@ static int omap2_can_sleep(void)
{
if (omap2_fclks_active())
return 0;
- if (!omap_uart_can_sleep())
- return 0;
if (osc_ck->usecount > 1)
return 0;
if (omap_dma_running())
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 4feee45..4ee5f4e 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -35,7 +35,6 @@
#include <plat/sram.h>
#include "clockdomain.h"
#include "powerdomain.h"
-#include <plat/serial.h>
#include <plat/sdrc.h>
#include <plat/prcm.h>
#include <plat/gpmc.h>
@@ -456,21 +455,11 @@ void omap_sram_idle(void)
clkdm_allow_idle(mpu_pwrdm->pwrdm_clkdms[0]);
}
-int omap3_can_sleep(void)
-{
- if (!omap_uart_can_sleep())
- return 0;
- return 1;
-}
-
static void omap3_pm_idle(void)
{
local_irq_disable();
local_fiq_disable();
- if (!omap3_can_sleep())
- goto out;
-
if (omap_irq_pending() || need_resched())
goto out;
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index c909770e..247d894 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -82,28 +82,6 @@ static struct omap_uart_port_info omap_serial_default_info[] __initdata = {
};
#ifdef CONFIG_PM
-
-int omap_uart_can_sleep(void)
-{
- struct omap_uart_state *uart;
- int can_sleep = 1;
-
- list_for_each_entry(uart, &uart_list, node) {
- if (!uart->clocked)
- continue;
-
- if (!uart->can_sleep) {
- can_sleep = 0;
- continue;
- }
-
- /* This UART can now safely sleep. */
- omap_uart_allow_sleep(uart);
- }
-
- return can_sleep;
-}
-
static void omap_uart_enable_wakeup(struct platform_device *pdev, bool enable)
{
struct omap_device *od = to_omap_device(pdev);
diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h
index ea63b2b..9ff4444 100644
--- a/arch/arm/plat-omap/include/plat/omap-serial.h
+++ b/arch/arm/plat-omap/include/plat/omap-serial.h
@@ -19,6 +19,7 @@
#include <linux/serial_core.h>
#include <linux/platform_device.h>
+#include <linux/pm_qos.h>
#include <plat/mux.h>
@@ -130,6 +131,11 @@ struct uart_omap_port {
u32 context_loss_cnt;
u32 errata;
u8 wakeups_enabled;
+
+ struct pm_qos_request pm_qos_request;
+ u32 latency;
+ u32 calc_latency;
+ struct work_struct qos_work;
};
#endif /* __OMAP_SERIAL_H__ */
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index e1eaa66..f3ff0ca 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -51,6 +51,8 @@ static void serial_omap_rxdma_poll(unsigned long uart_no);
static int serial_omap_start_rxdma(struct uart_omap_port *up);
static void serial_omap_mdr1_errataset(struct uart_omap_port *up, u8 mdr1);
+static struct workqueue_struct *serial_omap_uart_wq;
+
static inline unsigned int serial_in(struct uart_omap_port *up, int offset)
{
offset <<= up->port.regshift;
@@ -671,6 +673,14 @@ serial_omap_configure_xonxoff
serial_out(up, UART_LCR, up->lcr);
}
+static void serial_omap_uart_qos_work(struct work_struct *work)
+{
+ struct uart_omap_port *up = container_of(work, struct uart_omap_port,
+ qos_work);
+
+ pm_qos_update_request(&up->pm_qos_request, up->latency);
+}
+
static void
serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
struct ktermios *old)
@@ -711,6 +721,12 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/13);
quot = serial_omap_get_divisor(port, baud);
+ /* calculate wakeup latency constraint */
+ up->calc_latency = (1000000 * up->port.fifosize) /
+ (1000 * baud / 8);
+ up->latency = up->calc_latency;
+ schedule_work(&up->qos_work);
+
up->dll = quot & 0xff;
up->dlh = quot >> 8;
up->mdr1 = UART_OMAP_MDR1_DISABLE;
@@ -1145,8 +1161,11 @@ static int serial_omap_suspend(struct device *dev)
{
struct uart_omap_port *up = dev_get_drvdata(dev);
- if (up)
+ if (up) {
uart_suspend_port(&serial_omap_reg, &up->port);
+ flush_work_sync(&up->qos_work);
+ }
+
return 0;
}
@@ -1383,6 +1402,13 @@ static int serial_omap_probe(struct platform_device *pdev)
up->uart_dma.rx_dma_channel = OMAP_UART_DMA_CH_FREE;
}
+ up->latency = PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE;
+ up->calc_latency = PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE;
+ pm_qos_add_request(&up->pm_qos_request,
+ PM_QOS_CPU_DMA_LATENCY, up->latency);
+ serial_omap_uart_wq = create_singlethread_workqueue(up->name);
+ INIT_WORK(&up->qos_work, serial_omap_uart_qos_work);
+
pm_runtime_use_autosuspend(&pdev->dev);
pm_runtime_set_autosuspend_delay(&pdev->dev,
omap_up_info->autosuspend_timeout);
@@ -1416,6 +1442,8 @@ static int serial_omap_remove(struct platform_device *dev)
if (up) {
pm_runtime_disable(&up->pdev->dev);
uart_remove_one_port(&serial_omap_reg, &up->port);
+ pm_qos_remove_request(&up->pm_qos_request);
+
kfree(up);
}
@@ -1518,6 +1546,9 @@ static int serial_omap_runtime_suspend(struct device *dev)
(up->errata & UART_ERRATA_i291_DMA_FORCEIDLE))
pdata->set_forceidle(up->pdev);
+ up->latency = PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE;
+ schedule_work(&up->qos_work);
+
return 0;
}
@@ -1538,6 +1569,9 @@ static int serial_omap_runtime_resume(struct device *dev)
if (up->use_dma && pdata->set_noidle &&
(up->errata & UART_ERRATA_i291_DMA_FORCEIDLE))
pdata->set_noidle(up->pdev);
+
+ up->latency = up->calc_latency;
+ schedule_work(&up->qos_work);
}
return 0;
OpenPOWER on IntegriCloud