diff options
82 files changed, 7866 insertions, 2064 deletions
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 9cbc82e..c323778 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -865,6 +865,10 @@ and is between 256 and 4096 characters. It is defined in the file lasi= [HW,SCSI] PARISC LASI driver for the 53c700 chip Format: addr:<io>,irq:<irq> + libata.noacpi [LIBATA] Disables use of ACPI in libata suspend/resume + when set. + Format: <int> + load_ramdisk= [RAM] List of ramdisks to load from floppy See Documentation/ramdisk.txt. @@ -1085,10 +1089,6 @@ and is between 256 and 4096 characters. It is defined in the file emulation library even if a 387 maths coprocessor is present. - noacpi [LIBATA] Disables use of ACPI in libata suspend/resume - when set. - Format: <int> - noaliencache [MM, NUMA, SLAB] Disables the allocation of alien caches in the slab allocator. Saves per-node memory, but will impact performance. diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index d8046a1..4672066 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -173,6 +173,15 @@ config SATA_INIC162X help This option enables support for Initio 162x Serial ATA. +config PATA_ACPI + tristate "ACPI firmware driver for PATA" + depends on ATA_ACPI + help + This option enables an ACPI method driver which drives + motherboard PATA controller interfaces through the ACPI + firmware in the BIOS. This driver can sometimes handle + otherwise unsupported hardware. + config PATA_ALI tristate "ALi PATA support (Experimental)" depends on PCI && EXPERIMENTAL @@ -192,16 +201,25 @@ config PATA_AMD If unsure, say N. config PATA_ARTOP - tristate "ARTOP 6210/6260 PATA support (Experimental)" - depends on PCI && EXPERIMENTAL + tristate "ARTOP 6210/6260 PATA support" + depends on PCI help This option enables support for ARTOP PATA controllers. If unsure, say N. +config PATA_AT32 + tristate "Atmel AVR32 PATA support (Experimental)" + depends on AVR32 && PLATFORM_AT32AP && EXPERIMENTAL + help + This option enables support for the IDE devices on the + Atmel AT32AP platform. + + If unsure, say N. + config PATA_ATIIXP - tristate "ATI PATA support (Experimental)" - depends on PCI && EXPERIMENTAL + tristate "ATI PATA support" + depends on PCI help This option enables support for the ATI ATA interfaces found on the many ATI chipsets. @@ -219,8 +237,8 @@ config PATA_CMD640_PCI If unsure, say N. config PATA_CMD64X - tristate "CMD64x PATA support (Very Experimental)" - depends on PCI&& EXPERIMENTAL + tristate "CMD64x PATA support" + depends on PCI help This option enables support for the CMD64x series chips except for the CMD640. @@ -282,8 +300,8 @@ config ATA_GENERIC If unsure, say N. config PATA_HPT366 - tristate "HPT 366/368 PATA support (Experimental)" - depends on PCI && EXPERIMENTAL + tristate "HPT 366/368 PATA support" + depends on PCI help This option enables support for the HPT 366 and 368 PATA controllers via the new ATA layer. @@ -432,6 +450,15 @@ config PATA_NS87410 If unsure, say N. +config PATA_NS87415 + tristate "Nat Semi NS87415 PATA support (Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables support for the National Semiconductor + NS87415 PCI-IDE controller. + + If unsure, say N. + config PATA_OPTI tristate "OPTI621/6215 PATA support (Very Experimental)" depends on PCI && EXPERIMENTAL @@ -596,4 +623,20 @@ config PATA_SCC If unsure, say N. +config PATA_BF54X + tristate "Blackfin 54x ATAPI support" + depends on BF542 || BF548 || BF549 + help + This option enables support for the built-in ATAPI controller on + Blackfin 54x family chips. + + If unsure, say N. + +config PATA_BF54X_DMA + bool "DMA mode" + depends on PATA_BF54X + default y + help + Enable DMA mode for Blackfin ATAPI controller. + endif # ATA diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index 8149c68..2a63645 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -21,6 +21,7 @@ obj-$(CONFIG_PDC_ADMA) += pdc_adma.o obj-$(CONFIG_PATA_ALI) += pata_ali.o obj-$(CONFIG_PATA_AMD) += pata_amd.o obj-$(CONFIG_PATA_ARTOP) += pata_artop.o +obj-$(CONFIG_PATA_AT32) += pata_at32.o obj-$(CONFIG_PATA_ATIIXP) += pata_atiixp.o obj-$(CONFIG_PATA_CMD640_PCI) += pata_cmd640.o obj-$(CONFIG_PATA_CMD64X) += pata_cmd64x.o @@ -39,6 +40,7 @@ obj-$(CONFIG_PATA_IT8213) += pata_it8213.o obj-$(CONFIG_PATA_JMICRON) += pata_jmicron.o obj-$(CONFIG_PATA_NETCELL) += pata_netcell.o obj-$(CONFIG_PATA_NS87410) += pata_ns87410.o +obj-$(CONFIG_PATA_NS87415) += pata_ns87415.o obj-$(CONFIG_PATA_OPTI) += pata_opti.o obj-$(CONFIG_PATA_OPTIDMA) += pata_optidma.o obj-$(CONFIG_PATA_MPC52xx) += pata_mpc52xx.o @@ -61,12 +63,16 @@ obj-$(CONFIG_PATA_SIS) += pata_sis.o obj-$(CONFIG_PATA_TRIFLEX) += pata_triflex.o obj-$(CONFIG_PATA_IXP4XX_CF) += pata_ixp4xx_cf.o obj-$(CONFIG_PATA_SCC) += pata_scc.o +obj-$(CONFIG_PATA_BF54X) += pata_bf54x.o obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o obj-$(CONFIG_PATA_ICSIDE) += pata_icside.o +# Should be last but two libata driver +obj-$(CONFIG_PATA_ACPI) += pata_acpi.o # Should be last but one libata driver obj-$(CONFIG_ATA_GENERIC) += ata_generic.o # Should be last libata driver obj-$(CONFIG_PATA_LEGACY) += pata_legacy.o -libata-objs := libata-core.o libata-scsi.o libata-sff.o libata-eh.o +libata-objs := libata-core.o libata-scsi.o libata-sff.o libata-eh.o \ + libata-pmp.o libata-$(CONFIG_ATA_ACPI) += libata-acpi.o diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index c168203..10bc3f6 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -46,7 +46,7 @@ #include <linux/libata.h> #define DRV_NAME "ahci" -#define DRV_VERSION "2.3" +#define DRV_VERSION "3.0" enum { @@ -77,11 +77,10 @@ enum { RX_FIS_UNK = 0x60, /* offset of Unknown FIS data */ board_ahci = 0, - board_ahci_pi = 1, - board_ahci_vt8251 = 2, - board_ahci_ign_iferr = 3, - board_ahci_sb600 = 4, - board_ahci_mv = 5, + board_ahci_vt8251 = 1, + board_ahci_ign_iferr = 2, + board_ahci_sb600 = 3, + board_ahci_mv = 4, /* global controller registers */ HOST_CAP = 0x00, /* host capabilities */ @@ -97,6 +96,7 @@ enum { /* HOST_CAP bits */ HOST_CAP_SSC = (1 << 14), /* Slumber capable */ + HOST_CAP_PMP = (1 << 17), /* Port Multiplier support */ HOST_CAP_CLO = (1 << 24), /* Command List Override support */ HOST_CAP_SSS = (1 << 27), /* Staggered Spin-up */ HOST_CAP_SNTF = (1 << 29), /* SNotification register */ @@ -144,7 +144,8 @@ enum { PORT_IRQ_IF_ERR | PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY | - PORT_IRQ_UNK_FIS, + PORT_IRQ_UNK_FIS | + PORT_IRQ_BAD_PMP, PORT_IRQ_ERROR = PORT_IRQ_FREEZE | PORT_IRQ_TF_ERR | PORT_IRQ_HBUS_DATA_ERR, @@ -154,6 +155,7 @@ enum { /* PORT_CMD bits */ PORT_CMD_ATAPI = (1 << 24), /* Device is ATAPI */ + PORT_CMD_PMP = (1 << 17), /* PMP attached */ PORT_CMD_LIST_ON = (1 << 15), /* cmd list DMA engine running */ PORT_CMD_FIS_ON = (1 << 14), /* FIS DMA engine running */ PORT_CMD_FIS_RX = (1 << 4), /* Enable FIS receive DMA engine */ @@ -167,19 +169,22 @@ enum { PORT_CMD_ICC_PARTIAL = (0x2 << 28), /* Put i/f in partial state */ PORT_CMD_ICC_SLUMBER = (0x6 << 28), /* Put i/f in slumber state */ + /* hpriv->flags bits */ + AHCI_HFLAG_NO_NCQ = (1 << 0), + AHCI_HFLAG_IGN_IRQ_IF_ERR = (1 << 1), /* ignore IRQ_IF_ERR */ + AHCI_HFLAG_IGN_SERR_INTERNAL = (1 << 2), /* ignore SERR_INTERNAL */ + AHCI_HFLAG_32BIT_ONLY = (1 << 3), /* force 32bit */ + AHCI_HFLAG_MV_PATA = (1 << 4), /* PATA port */ + AHCI_HFLAG_NO_MSI = (1 << 5), /* no PCI MSI */ + AHCI_HFLAG_NO_PMP = (1 << 6), /* no PMP */ + /* ap->flags bits */ - AHCI_FLAG_NO_NCQ = (1 << 24), - AHCI_FLAG_IGN_IRQ_IF_ERR = (1 << 25), /* ignore IRQ_IF_ERR */ - AHCI_FLAG_HONOR_PI = (1 << 26), /* honor PORTS_IMPL */ - AHCI_FLAG_IGN_SERR_INTERNAL = (1 << 27), /* ignore SERR_INTERNAL */ - AHCI_FLAG_32BIT_ONLY = (1 << 28), /* force 32bit */ - AHCI_FLAG_MV_PATA = (1 << 29), /* PATA port */ - AHCI_FLAG_NO_MSI = (1 << 30), /* no PCI MSI */ + AHCI_FLAG_NO_HOTPLUG = (1 << 24), /* ignore PxSERR.DIAG.N */ AHCI_FLAG_COMMON = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | - ATA_FLAG_SKIP_D2H_BSY | - ATA_FLAG_ACPI_SATA, + ATA_FLAG_ACPI_SATA | ATA_FLAG_AN, + AHCI_LFLAG_COMMON = ATA_LFLAG_SKIP_D2H_BSY, }; struct ahci_cmd_hdr { @@ -198,6 +203,7 @@ struct ahci_sg { }; struct ahci_host_priv { + unsigned int flags; /* AHCI_HFLAG_* */ u32 cap; /* cap to use */ u32 port_map; /* port map to use */ u32 saved_cap; /* saved initial cap */ @@ -205,6 +211,7 @@ struct ahci_host_priv { }; struct ahci_port_priv { + struct ata_link *active_link; struct ahci_cmd_hdr *cmd_slot; dma_addr_t cmd_slot_dma; void *cmd_tbl; @@ -215,6 +222,7 @@ struct ahci_port_priv { unsigned int ncq_saw_d2h:1; unsigned int ncq_saw_dmas:1; unsigned int ncq_saw_sdb:1; + u32 intr_mask; /* interrupts to enable */ }; static int ahci_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val); @@ -229,6 +237,8 @@ static void ahci_qc_prep(struct ata_queued_cmd *qc); static u8 ahci_check_status(struct ata_port *ap); static void ahci_freeze(struct ata_port *ap); static void ahci_thaw(struct ata_port *ap); +static void ahci_pmp_attach(struct ata_port *ap); +static void ahci_pmp_detach(struct ata_port *ap); static void ahci_error_handler(struct ata_port *ap); static void ahci_vt8251_error_handler(struct ata_port *ap); static void ahci_post_internal_cmd(struct ata_queued_cmd *qc); @@ -262,20 +272,17 @@ static struct scsi_host_template ahci_sht = { }; static const struct ata_port_operations ahci_ops = { - .port_disable = ata_port_disable, - .check_status = ahci_check_status, .check_altstatus = ahci_check_status, .dev_select = ata_noop_dev_select, .tf_read = ahci_tf_read, + .qc_defer = sata_pmp_qc_defer_cmd_switch, .qc_prep = ahci_qc_prep, .qc_issue = ahci_qc_issue, .irq_clear = ahci_irq_clear, - .irq_on = ata_dummy_irq_on, - .irq_ack = ata_dummy_irq_ack, .scr_read = ahci_scr_read, .scr_write = ahci_scr_write, @@ -286,6 +293,9 @@ static const struct ata_port_operations ahci_ops = { .error_handler = ahci_error_handler, .post_internal_cmd = ahci_post_internal_cmd, + .pmp_attach = ahci_pmp_attach, + .pmp_detach = ahci_pmp_detach, + #ifdef CONFIG_PM .port_suspend = ahci_port_suspend, .port_resume = ahci_port_resume, @@ -296,20 +306,17 @@ static const struct ata_port_operations ahci_ops = { }; static const struct ata_port_operations ahci_vt8251_ops = { - .port_disable = ata_port_disable, - .check_status = ahci_check_status, .check_altstatus = ahci_check_status, .dev_select = ata_noop_dev_select, .tf_read = ahci_tf_read, + .qc_defer = sata_pmp_qc_defer_cmd_switch, .qc_prep = ahci_qc_prep, .qc_issue = ahci_qc_issue, .irq_clear = ahci_irq_clear, - .irq_on = ata_dummy_irq_on, - .irq_ack = ata_dummy_irq_ack, .scr_read = ahci_scr_read, .scr_write = ahci_scr_write, @@ -320,6 +327,9 @@ static const struct ata_port_operations ahci_vt8251_ops = { .error_handler = ahci_vt8251_error_handler, .post_internal_cmd = ahci_post_internal_cmd, + .pmp_attach = ahci_pmp_attach, + .pmp_detach = ahci_pmp_detach, + #ifdef CONFIG_PM .port_suspend = ahci_port_suspend, .port_resume = ahci_port_resume, @@ -329,53 +339,52 @@ static const struct ata_port_operations ahci_vt8251_ops = { .port_stop = ahci_port_stop, }; +#define AHCI_HFLAGS(flags) .private_data = (void *)(flags) + static const struct ata_port_info ahci_port_info[] = { /* board_ahci */ { .flags = AHCI_FLAG_COMMON, - .pio_mask = 0x1f, /* pio0-4 */ - .udma_mask = ATA_UDMA6, - .port_ops = &ahci_ops, - }, - /* board_ahci_pi */ - { - .flags = AHCI_FLAG_COMMON | AHCI_FLAG_HONOR_PI, + .link_flags = AHCI_LFLAG_COMMON, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, .port_ops = &ahci_ops, }, /* board_ahci_vt8251 */ { - .flags = AHCI_FLAG_COMMON | ATA_FLAG_HRST_TO_RESUME | - AHCI_FLAG_NO_NCQ, + AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_PMP), + .flags = AHCI_FLAG_COMMON, + .link_flags = AHCI_LFLAG_COMMON | ATA_LFLAG_HRST_TO_RESUME, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, .port_ops = &ahci_vt8251_ops, }, /* board_ahci_ign_iferr */ { - .flags = AHCI_FLAG_COMMON | AHCI_FLAG_IGN_IRQ_IF_ERR, + AHCI_HFLAGS (AHCI_HFLAG_IGN_IRQ_IF_ERR), + .flags = AHCI_FLAG_COMMON, + .link_flags = AHCI_LFLAG_COMMON, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, .port_ops = &ahci_ops, }, /* board_ahci_sb600 */ { - .flags = AHCI_FLAG_COMMON | - AHCI_FLAG_IGN_SERR_INTERNAL | - AHCI_FLAG_32BIT_ONLY, + AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL | + AHCI_HFLAG_32BIT_ONLY | AHCI_HFLAG_NO_PMP), + .flags = AHCI_FLAG_COMMON, + .link_flags = AHCI_LFLAG_COMMON, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, .port_ops = &ahci_ops, }, /* board_ahci_mv */ { - .sht = &ahci_sht, + AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_MSI | + AHCI_HFLAG_MV_PATA), .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | - ATA_FLAG_SKIP_D2H_BSY | AHCI_FLAG_HONOR_PI | - AHCI_FLAG_NO_NCQ | AHCI_FLAG_NO_MSI | - AHCI_FLAG_MV_PATA, + ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA, + .link_flags = AHCI_LFLAG_COMMON, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, .port_ops = &ahci_ops, @@ -394,23 +403,25 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(INTEL, 0x2682), board_ahci }, /* ESB2 */ { PCI_VDEVICE(INTEL, 0x2683), board_ahci }, /* ESB2 */ { PCI_VDEVICE(INTEL, 0x27c6), board_ahci }, /* ICH7-M DH */ - { PCI_VDEVICE(INTEL, 0x2821), board_ahci_pi }, /* ICH8 */ - { PCI_VDEVICE(INTEL, 0x2822), board_ahci_pi }, /* ICH8 */ - { PCI_VDEVICE(INTEL, 0x2824), board_ahci_pi }, /* ICH8 */ - { PCI_VDEVICE(INTEL, 0x2829), board_ahci_pi }, /* ICH8M */ - { PCI_VDEVICE(INTEL, 0x282a), board_ahci_pi }, /* ICH8M */ - { PCI_VDEVICE(INTEL, 0x2922), board_ahci_pi }, /* ICH9 */ - { PCI_VDEVICE(INTEL, 0x2923), board_ahci_pi }, /* ICH9 */ - { PCI_VDEVICE(INTEL, 0x2924), board_ahci_pi }, /* ICH9 */ - { PCI_VDEVICE(INTEL, 0x2925), board_ahci_pi }, /* ICH9 */ - { PCI_VDEVICE(INTEL, 0x2927), board_ahci_pi }, /* ICH9 */ - { PCI_VDEVICE(INTEL, 0x2929), board_ahci_pi }, /* ICH9M */ - { PCI_VDEVICE(INTEL, 0x292a), board_ahci_pi }, /* ICH9M */ - { PCI_VDEVICE(INTEL, 0x292b), board_ahci_pi }, /* ICH9M */ - { PCI_VDEVICE(INTEL, 0x292c), board_ahci_pi }, /* ICH9M */ - { PCI_VDEVICE(INTEL, 0x292f), board_ahci_pi }, /* ICH9M */ - { PCI_VDEVICE(INTEL, 0x294d), board_ahci_pi }, /* ICH9 */ - { PCI_VDEVICE(INTEL, 0x294e), board_ahci_pi }, /* ICH9M */ + { PCI_VDEVICE(INTEL, 0x2821), board_ahci }, /* ICH8 */ + { PCI_VDEVICE(INTEL, 0x2822), board_ahci }, /* ICH8 */ + { PCI_VDEVICE(INTEL, 0x2824), board_ahci }, /* ICH8 */ + { PCI_VDEVICE(INTEL, 0x2829), board_ahci }, /* ICH8M */ + { PCI_VDEVICE(INTEL, 0x282a), board_ahci }, /* ICH8M */ + { PCI_VDEVICE(INTEL, 0x2922), board_ahci }, /* ICH9 */ + { PCI_VDEVICE(INTEL, 0x2923), board_ahci }, /* ICH9 */ + { PCI_VDEVICE(INTEL, 0x2924), board_ahci }, /* ICH9 */ + { PCI_VDEVICE(INTEL, 0x2925), board_ahci }, /* ICH9 */ + { PCI_VDEVICE(INTEL, 0x2927), board_ahci }, /* ICH9 */ + { PCI_VDEVICE(INTEL, 0x2929), board_ahci }, /* ICH9M */ + { PCI_VDEVICE(INTEL, 0x292a), board_ahci }, /* ICH9M */ + { PCI_VDEVICE(INTEL, 0x292b), board_ahci }, /* ICH9M */ + { PCI_VDEVICE(INTEL, 0x292c), board_ahci }, /* ICH9M */ + { PCI_VDEVICE(INTEL, 0x292f), board_ahci }, /* ICH9M */ + { PCI_VDEVICE(INTEL, 0x294d), board_ahci }, /* ICH9 */ + { PCI_VDEVICE(INTEL, 0x294e), board_ahci }, /* ICH9M */ + { PCI_VDEVICE(INTEL, 0x502a), board_ahci }, /* Tolapai */ + { PCI_VDEVICE(INTEL, 0x502b), board_ahci }, /* Tolapai */ /* JMicron 360/1/3/5/6, match class to avoid IDE function */ { PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, @@ -474,6 +485,14 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(NVIDIA, 0x0ad9), board_ahci }, /* MCP77 */ { PCI_VDEVICE(NVIDIA, 0x0ada), board_ahci }, /* MCP77 */ { PCI_VDEVICE(NVIDIA, 0x0adb), board_ahci }, /* MCP77 */ + { PCI_VDEVICE(NVIDIA, 0x0ab8), board_ahci }, /* MCP79 */ + { PCI_VDEVICE(NVIDIA, 0x0ab9), board_ahci }, /* MCP79 */ + { PCI_VDEVICE(NVIDIA, 0x0aba), board_ahci }, /* MCP79 */ + { PCI_VDEVICE(NVIDIA, 0x0abb), board_ahci }, /* MCP79 */ + { PCI_VDEVICE(NVIDIA, 0x0abc), board_ahci }, /* MCP79 */ + { PCI_VDEVICE(NVIDIA, 0x0abd), board_ahci }, /* MCP79 */ + { PCI_VDEVICE(NVIDIA, 0x0abe), board_ahci }, /* MCP79 */ + { PCI_VDEVICE(NVIDIA, 0x0abf), board_ahci }, /* MCP79 */ /* SiS */ { PCI_VDEVICE(SI, 0x1184), board_ahci }, /* SiS 966 */ @@ -524,7 +543,6 @@ static inline void __iomem *ahci_port_base(struct ata_port *ap) /** * ahci_save_initial_config - Save and fixup initial config values * @pdev: target PCI device - * @pi: associated ATA port info * @hpriv: host private area to store config values * * Some registers containing configuration info might be setup by @@ -538,7 +556,6 @@ static inline void __iomem *ahci_port_base(struct ata_port *ap) * None. */ static void ahci_save_initial_config(struct pci_dev *pdev, - const struct ata_port_info *pi, struct ahci_host_priv *hpriv) { void __iomem *mmio = pcim_iomap_table(pdev)[AHCI_PCI_BAR]; @@ -552,26 +569,22 @@ static void ahci_save_initial_config(struct pci_dev *pdev, hpriv->saved_port_map = port_map = readl(mmio + HOST_PORTS_IMPL); /* some chips have errata preventing 64bit use */ - if ((cap & HOST_CAP_64) && (pi->flags & AHCI_FLAG_32BIT_ONLY)) { + if ((cap & HOST_CAP_64) && (hpriv->flags & AHCI_HFLAG_32BIT_ONLY)) { dev_printk(KERN_INFO, &pdev->dev, "controller can't do 64bit DMA, forcing 32bit\n"); cap &= ~HOST_CAP_64; } - if ((cap & HOST_CAP_NCQ) && (pi->flags & AHCI_FLAG_NO_NCQ)) { + if ((cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_NO_NCQ)) { dev_printk(KERN_INFO, &pdev->dev, "controller can't do NCQ, turning off CAP_NCQ\n"); cap &= ~HOST_CAP_NCQ; } - /* fixup zero port_map */ - if (!port_map) { - port_map = (1 << ahci_nr_ports(cap)) - 1; - dev_printk(KERN_WARNING, &pdev->dev, - "PORTS_IMPL is zero, forcing 0x%x\n", port_map); - - /* write the fixed up value to the PI register */ - hpriv->saved_port_map = port_map; + if ((cap && HOST_CAP_PMP) && (hpriv->flags & AHCI_HFLAG_NO_PMP)) { + dev_printk(KERN_INFO, &pdev->dev, + "controller can't do PMP, turning off CAP_PMP\n"); + cap &= ~HOST_CAP_PMP; } /* @@ -579,7 +592,7 @@ static void ahci_save_initial_config(struct pci_dev *pdev, * is asserted through the standard AHCI port * presence register, as bit 4 (counting from 0) */ - if (pi->flags & AHCI_FLAG_MV_PATA) { + if (hpriv->flags & AHCI_HFLAG_MV_PATA) { dev_printk(KERN_ERR, &pdev->dev, "MV_AHCI HACK: port_map %x -> %x\n", hpriv->port_map, @@ -589,7 +602,7 @@ static void ahci_save_initial_config(struct pci_dev *pdev, } /* cross check port_map and cap.n_ports */ - if (pi->flags & AHCI_FLAG_HONOR_PI) { + if (port_map) { u32 tmp_port_map = port_map; int n_ports = ahci_nr_ports(cap); @@ -600,17 +613,26 @@ static void ahci_save_initial_config(struct pci_dev *pdev, } } - /* Whine if inconsistent. No need to update cap. - * port_map is used to determine number of ports. + /* If n_ports and port_map are inconsistent, whine and + * clear port_map and let it be generated from n_ports. */ - if (n_ports || tmp_port_map) + if (n_ports || tmp_port_map) { dev_printk(KERN_WARNING, &pdev->dev, "nr_ports (%u) and implemented port map " - "(0x%x) don't match\n", + "(0x%x) don't match, using nr_ports\n", ahci_nr_ports(cap), port_map); - } else { - /* fabricate port_map from cap.nr_ports */ + port_map = 0; + } + } + + /* fabricate port_map from cap.nr_ports */ + if (!port_map) { port_map = (1 << ahci_nr_ports(cap)) - 1; + dev_printk(KERN_WARNING, &pdev->dev, + "forcing PORTS_IMPL to 0x%x\n", port_map); + + /* write the fixed up value to the PI register */ + hpriv->saved_port_map = port_map; } /* record values to use during operation */ @@ -836,8 +858,14 @@ static int ahci_reset_controller(struct ata_host *host) void __iomem *mmio = host->iomap[AHCI_PCI_BAR]; u32 tmp; - /* global controller reset */ + /* we must be in AHCI mode, before using anything + * AHCI-specific, such as HOST_RESET. + */ tmp = readl(mmio + HOST_CTL); + if (!(tmp & HOST_AHCI_EN)) + writel(tmp | HOST_AHCI_EN, mmio + HOST_CTL); + + /* global controller reset */ if ((tmp & HOST_RESET) == 0) { writel(tmp | HOST_RESET, mmio + HOST_CTL); readl(mmio + HOST_CTL); /* flush */ @@ -904,13 +932,14 @@ static void ahci_port_init(struct pci_dev *pdev, struct ata_port *ap, static void ahci_init_controller(struct ata_host *host) { + struct ahci_host_priv *hpriv = host->private_data; struct pci_dev *pdev = to_pci_dev(host->dev); void __iomem *mmio = host->iomap[AHCI_PCI_BAR]; int i; void __iomem *port_mmio; u32 tmp; - if (host->ports[0]->flags & AHCI_FLAG_MV_PATA) { + if (hpriv->flags & AHCI_HFLAG_MV_PATA) { port_mmio = __ahci_port_base(host, 4); writel(0, port_mmio + PORT_IRQ_MASK); @@ -1042,9 +1071,10 @@ static int ahci_exec_polled_cmd(struct ata_port *ap, int pmp, return 0; } -static int ahci_do_softreset(struct ata_port *ap, unsigned int *class, +static int ahci_do_softreset(struct ata_link *link, unsigned int *class, int pmp, unsigned long deadline) { + struct ata_port *ap = link->ap; const char *reason = NULL; unsigned long now, msecs; struct ata_taskfile tf; @@ -1052,7 +1082,7 @@ static int ahci_do_softreset(struct ata_port *ap, unsigned int *class, DPRINTK("ENTER\n"); - if (ata_port_offline(ap)) { + if (ata_link_offline(link)) { DPRINTK("PHY reports no device\n"); *class = ATA_DEV_NONE; return 0; @@ -1061,10 +1091,10 @@ static int ahci_do_softreset(struct ata_port *ap, unsigned int *class, /* prepare for SRST (AHCI-1.1 10.4.1) */ rc = ahci_kick_engine(ap, 1); if (rc) - ata_port_printk(ap, KERN_WARNING, + ata_link_printk(link, KERN_WARNING, "failed to reset engine (errno=%d)", rc); - ata_tf_init(ap->device, &tf); + ata_tf_init(link->device, &tf); /* issue the first D2H Register FIS */ msecs = 0; @@ -1109,19 +1139,25 @@ static int ahci_do_softreset(struct ata_port *ap, unsigned int *class, return 0; fail: - ata_port_printk(ap, KERN_ERR, "softreset failed (%s)\n", reason); + ata_link_printk(link, KERN_ERR, "softreset failed (%s)\n", reason); return rc; } -static int ahci_softreset(struct ata_port *ap, unsigned int *class, +static int ahci_softreset(struct ata_link *link, unsigned int *class, unsigned long deadline) { - return ahci_do_softreset(ap, class, 0, deadline); + int pmp = 0; + + if (link->ap->flags & ATA_FLAG_PMP) + pmp = SATA_PMP_CTRL_PORT; + + return ahci_do_softreset(link, class, pmp, deadline); } -static int ahci_hardreset(struct ata_port *ap, unsigned int *class, +static int ahci_hardreset(struct ata_link *link, unsigned int *class, unsigned long deadline) { + struct ata_port *ap = link->ap; struct ahci_port_priv *pp = ap->private_data; u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; struct ata_taskfile tf; @@ -1132,26 +1168,27 @@ static int ahci_hardreset(struct ata_port *ap, unsigned int *class, ahci_stop_engine(ap); /* clear D2H reception area to properly wait for D2H FIS */ - ata_tf_init(ap->device, &tf); + ata_tf_init(link->device, &tf); tf.command = 0x80; ata_tf_to_fis(&tf, 0, 0, d2h_fis); - rc = sata_std_hardreset(ap, class, deadline); + rc = sata_std_hardreset(link, class, deadline); ahci_start_engine(ap); - if (rc == 0 && ata_port_online(ap)) + if (rc == 0 && ata_link_online(link)) *class = ahci_dev_classify(ap); - if (*class == ATA_DEV_UNKNOWN) + if (rc != -EAGAIN && *class == ATA_DEV_UNKNOWN) *class = ATA_DEV_NONE; DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class); return rc; } -static int ahci_vt8251_hardreset(struct ata_port *ap, unsigned int *class, +static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class, unsigned long deadline) { + struct ata_port *ap = link->ap; u32 serror; int rc; @@ -1159,7 +1196,7 @@ static int ahci_vt8251_hardreset(struct ata_port *ap, unsigned int *class, ahci_stop_engine(ap); - rc = sata_port_hardreset(ap, sata_ehc_deb_timing(&ap->eh_context), + rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context), deadline); /* vt8251 needs SError cleared for the port to operate */ @@ -1176,12 +1213,13 @@ static int ahci_vt8251_hardreset(struct ata_port *ap, unsigned int *class, return rc ?: -EAGAIN; } -static void ahci_postreset(struct ata_port *ap, unsigned int *class) +static void ahci_postreset(struct ata_link *link, unsigned int *class) { + struct ata_port *ap = link->ap; void __iomem *port_mmio = ahci_port_base(ap); u32 new_tmp, tmp; - ata_std_postreset(ap, class); + ata_std_postreset(link, class); /* Make sure port's ATAPI bit is set appropriately */ new_tmp = tmp = readl(port_mmio + PORT_CMD); @@ -1195,6 +1233,12 @@ static void ahci_postreset(struct ata_port *ap, unsigned int *class) } } +static int ahci_pmp_softreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + return ahci_do_softreset(link, class, link->pmp, deadline); +} + static u8 ahci_check_status(struct ata_port *ap) { void __iomem *mmio = ap->ioaddr.cmd_addr; @@ -1253,7 +1297,7 @@ static void ahci_qc_prep(struct ata_queued_cmd *qc) */ cmd_tbl = pp->cmd_tbl + qc->tag * AHCI_CMD_TBL_SZ; - ata_tf_to_fis(&qc->tf, 0, 1, cmd_tbl); + ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, cmd_tbl); if (is_atapi) { memset(cmd_tbl + AHCI_CMD_TBL_CDB, 0, 32); memcpy(cmd_tbl + AHCI_CMD_TBL_CDB, qc->cdb, qc->dev->cdb_len); @@ -1266,7 +1310,7 @@ static void ahci_qc_prep(struct ata_queued_cmd *qc) /* * Fill in command slot information. */ - opts = cmd_fis_len | n_elem << 16; + opts = cmd_fis_len | n_elem << 16 | (qc->dev->link->pmp << 12); if (qc->tf.flags & ATA_TFLAG_WRITE) opts |= AHCI_CMD_WRITE; if (is_atapi) @@ -1277,66 +1321,87 @@ static void ahci_qc_prep(struct ata_queued_cmd *qc) static void ahci_error_intr(struct ata_port *ap, u32 irq_stat) { + struct ahci_host_priv *hpriv = ap->host->private_data; struct ahci_port_priv *pp = ap->private_data; - struct ata_eh_info *ehi = &ap->eh_info; - unsigned int err_mask = 0, action = 0; - struct ata_queued_cmd *qc; + struct ata_eh_info *host_ehi = &ap->link.eh_info; + struct ata_link *link = NULL; + struct ata_queued_cmd *active_qc; + struct ata_eh_info *active_ehi; u32 serror; - ata_ehi_clear_desc(ehi); + /* determine active link */ + ata_port_for_each_link(link, ap) + if (ata_link_active(link)) + break; + if (!link) + link = &ap->link; + + active_qc = ata_qc_from_tag(ap, link->active_tag); + active_ehi = &link->eh_info; + + /* record irq stat */ + ata_ehi_clear_desc(host_ehi); + ata_ehi_push_desc(host_ehi, "irq_stat 0x%08x", irq_stat); /* AHCI needs SError cleared; otherwise, it might lock up */ ahci_scr_read(ap, SCR_ERROR, &serror); ahci_scr_write(ap, SCR_ERROR, serror); - - /* analyze @irq_stat */ - ata_ehi_push_desc(ehi, "irq_stat 0x%08x", irq_stat); + host_ehi->serror |= serror; /* some controllers set IRQ_IF_ERR on device errors, ignore it */ - if (ap->flags & AHCI_FLAG_IGN_IRQ_IF_ERR) + if (hpriv->flags & AHCI_HFLAG_IGN_IRQ_IF_ERR) irq_stat &= ~PORT_IRQ_IF_ERR; if (irq_stat & PORT_IRQ_TF_ERR) { - err_mask |= AC_ERR_DEV; - if (ap->flags & AHCI_FLAG_IGN_SERR_INTERNAL) - serror &= ~SERR_INTERNAL; + /* If qc is active, charge it; otherwise, the active + * link. There's no active qc on NCQ errors. It will + * be determined by EH by reading log page 10h. + */ + if (active_qc) + active_qc->err_mask |= AC_ERR_DEV; + else + active_ehi->err_mask |= AC_ERR_DEV; + + if (hpriv->flags & AHCI_HFLAG_IGN_SERR_INTERNAL) + host_ehi->serror &= ~SERR_INTERNAL; + } + + if (irq_stat & PORT_IRQ_UNK_FIS) { + u32 *unk = (u32 *)(pp->rx_fis + RX_FIS_UNK); + + active_ehi->err_mask |= AC_ERR_HSM; + active_ehi->action |= ATA_EH_SOFTRESET; + ata_ehi_push_desc(active_ehi, + "unknown FIS %08x %08x %08x %08x" , + unk[0], unk[1], unk[2], unk[3]); + } + + if (ap->nr_pmp_links && (irq_stat & PORT_IRQ_BAD_PMP)) { + active_ehi->err_mask |= AC_ERR_HSM; + active_ehi->action |= ATA_EH_SOFTRESET; + ata_ehi_push_desc(active_ehi, "incorrect PMP"); } if (irq_stat & (PORT_IRQ_HBUS_ERR | PORT_IRQ_HBUS_DATA_ERR)) { - err_mask |= AC_ERR_HOST_BUS; - action |= ATA_EH_SOFTRESET; + host_ehi->err_mask |= AC_ERR_HOST_BUS; + host_ehi->action |= ATA_EH_SOFTRESET; + ata_ehi_push_desc(host_ehi, "host bus error"); } if (irq_stat & PORT_IRQ_IF_ERR) { - err_mask |= AC_ERR_ATA_BUS; - action |= ATA_EH_SOFTRESET; - ata_ehi_push_desc(ehi, "interface fatal error"); + host_ehi->err_mask |= AC_ERR_ATA_BUS; + host_ehi->action |= ATA_EH_SOFTRESET; + ata_ehi_push_desc(host_ehi, "interface fatal error"); } if (irq_stat & (PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY)) { - ata_ehi_hotplugged(ehi); - ata_ehi_push_desc(ehi, "%s", irq_stat & PORT_IRQ_CONNECT ? + ata_ehi_hotplugged(host_ehi); + ata_ehi_push_desc(host_ehi, "%s", + irq_stat & PORT_IRQ_CONNECT ? "connection status changed" : "PHY RDY changed"); } - if (irq_stat & PORT_IRQ_UNK_FIS) { - u32 *unk = (u32 *)(pp->rx_fis + RX_FIS_UNK); - - err_mask |= AC_ERR_HSM; - action |= ATA_EH_SOFTRESET; - ata_ehi_push_desc(ehi, "unknown FIS %08x %08x %08x %08x", - unk[0], unk[1], unk[2], unk[3]); - } - /* okay, let's hand over to EH */ - ehi->serror |= serror; - ehi->action |= action; - - qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc) - qc->err_mask |= err_mask; - else - ehi->err_mask |= err_mask; if (irq_stat & PORT_IRQ_FREEZE) ata_port_freeze(ap); @@ -1347,25 +1412,64 @@ static void ahci_error_intr(struct ata_port *ap, u32 irq_stat) static void ahci_port_intr(struct ata_port *ap) { void __iomem *port_mmio = ap->ioaddr.cmd_addr; - struct ata_eh_info *ehi = &ap->eh_info; + struct ata_eh_info *ehi = &ap->link.eh_info; struct ahci_port_priv *pp = ap->private_data; + struct ahci_host_priv *hpriv = ap->host->private_data; + int resetting = !!(ap->pflags & ATA_PFLAG_RESETTING); u32 status, qc_active; int rc, known_irq = 0; status = readl(port_mmio + PORT_IRQ_STAT); writel(status, port_mmio + PORT_IRQ_STAT); + /* ignore BAD_PMP while resetting */ + if (unlikely(resetting)) + status &= ~PORT_IRQ_BAD_PMP; + if (unlikely(status & PORT_IRQ_ERROR)) { ahci_error_intr(ap, status); return; } - if (ap->sactive) + if (status & PORT_IRQ_SDB_FIS) { + /* If SNotification is available, leave notification + * handling to sata_async_notification(). If not, + * emulate it by snooping SDB FIS RX area. + * + * Snooping FIS RX area is probably cheaper than + * poking SNotification but some constrollers which + * implement SNotification, ICH9 for example, don't + * store AN SDB FIS into receive area. + */ + if (hpriv->cap & HOST_CAP_SNTF) + sata_async_notification(ap); + else { + /* If the 'N' bit in word 0 of the FIS is set, + * we just received asynchronous notification. + * Tell libata about it. + */ + const __le32 *f = pp->rx_fis + RX_FIS_SDB; + u32 f0 = le32_to_cpu(f[0]); + + if (f0 & (1 << 15)) + sata_async_notification(ap); + } + } + + /* pp->active_link is valid iff any command is in flight */ + if (ap->qc_active && pp->active_link->sactive) qc_active = readl(port_mmio + PORT_SCR_ACT); else qc_active = readl(port_mmio + PORT_CMD_ISSUE); rc = ata_qc_complete_multiple(ap, qc_active, NULL); + + /* If resetting, spurious or invalid completions are expected, + * return unconditionally. + */ + if (resetting) + return; + if (rc > 0) return; if (rc < 0) { @@ -1380,7 +1484,7 @@ static void ahci_port_intr(struct ata_port *ap) /* if !NCQ, ignore. No modern ATA device has broken HSM * implementation for non-NCQ commands. */ - if (!ap->sactive) + if (!ap->link.sactive) return; if (status & PORT_IRQ_D2H_REG_FIS) { @@ -1433,7 +1537,7 @@ static void ahci_port_intr(struct ata_port *ap) if (!known_irq) ata_port_printk(ap, KERN_INFO, "spurious interrupt " "(irq_stat 0x%x active_tag 0x%x sactive 0x%x)\n", - status, ap->active_tag, ap->sactive); + status, ap->link.active_tag, ap->link.sactive); } static void ahci_irq_clear(struct ata_port *ap) @@ -1498,6 +1602,13 @@ static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; void __iomem *port_mmio = ahci_port_base(ap); + struct ahci_port_priv *pp = ap->private_data; + + /* Keep track of the currently active link. It will be used + * in completion path to determine whether NCQ phase is in + * progress. + */ + pp->active_link = qc->dev->link; if (qc->tf.protocol == ATA_PROT_NCQ) writel(1 << qc->tag, port_mmio + PORT_SCR_ACT); @@ -1520,6 +1631,7 @@ static void ahci_thaw(struct ata_port *ap) void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR]; void __iomem *port_mmio = ahci_port_base(ap); u32 tmp; + struct ahci_port_priv *pp = ap->private_data; /* clear IRQ */ tmp = readl(port_mmio + PORT_IRQ_STAT); @@ -1527,7 +1639,7 @@ static void ahci_thaw(struct ata_port *ap) writel(1 << ap->port_no, mmio + HOST_IRQ_STAT); /* turn IRQ back on */ - writel(DEF_PORT_IRQ, port_mmio + PORT_IRQ_MASK); + writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK); } static void ahci_error_handler(struct ata_port *ap) @@ -1539,8 +1651,10 @@ static void ahci_error_handler(struct ata_port *ap) } /* perform recovery */ - ata_do_eh(ap, ata_std_prereset, ahci_softreset, ahci_hardreset, - ahci_postreset); + sata_pmp_do_eh(ap, ata_std_prereset, ahci_softreset, + ahci_hardreset, ahci_postreset, + sata_pmp_std_prereset, ahci_pmp_softreset, + sata_pmp_std_hardreset, sata_pmp_std_postreset); } static void ahci_vt8251_error_handler(struct ata_port *ap) @@ -1565,11 +1679,44 @@ static void ahci_post_internal_cmd(struct ata_queued_cmd *qc) ahci_kick_engine(ap, 1); } +static void ahci_pmp_attach(struct ata_port *ap) +{ + void __iomem *port_mmio = ahci_port_base(ap); + struct ahci_port_priv *pp = ap->private_data; + u32 cmd; + + cmd = readl(port_mmio + PORT_CMD); + cmd |= PORT_CMD_PMP; + writel(cmd, port_mmio + PORT_CMD); + + pp->intr_mask |= PORT_IRQ_BAD_PMP; + writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK); +} + +static void ahci_pmp_detach(struct ata_port *ap) +{ + void __iomem *port_mmio = ahci_port_base(ap); + struct ahci_port_priv *pp = ap->private_data; + u32 cmd; + + cmd = readl(port_mmio + PORT_CMD); + cmd &= ~PORT_CMD_PMP; + writel(cmd, port_mmio + PORT_CMD); + + pp->intr_mask &= ~PORT_IRQ_BAD_PMP; + writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK); +} + static int ahci_port_resume(struct ata_port *ap) { ahci_power_up(ap); ahci_start_port(ap); + if (ap->nr_pmp_links) + ahci_pmp_attach(ap); + else + ahci_pmp_detach(ap); + return 0; } @@ -1681,6 +1828,12 @@ static int ahci_port_start(struct ata_port *ap) pp->cmd_tbl = mem; pp->cmd_tbl_dma = mem_dma; + /* + * Save off initial list of interrupts to be enabled. + * This could be changed later + */ + pp->intr_mask = DEF_PORT_IRQ; + ap->private_data = pp; /* engage engines, captain */ @@ -1830,20 +1983,24 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (rc) return rc; - if ((pi.flags & AHCI_FLAG_NO_MSI) || pci_enable_msi(pdev)) - pci_intx(pdev, 1); - hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL); if (!hpriv) return -ENOMEM; + hpriv->flags |= (unsigned long)pi.private_data; + + if ((hpriv->flags & AHCI_HFLAG_NO_MSI) || pci_enable_msi(pdev)) + pci_intx(pdev, 1); /* save initial config */ - ahci_save_initial_config(pdev, &pi, hpriv); + ahci_save_initial_config(pdev, hpriv); /* prepare host */ if (hpriv->cap & HOST_CAP_NCQ) pi.flags |= ATA_FLAG_NCQ; + if (hpriv->cap & HOST_CAP_PMP) + pi.flags |= ATA_FLAG_PMP; + host = ata_host_alloc_pinfo(&pdev->dev, ppi, fls(hpriv->port_map)); if (!host) return -ENOMEM; @@ -1854,6 +2011,10 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) struct ata_port *ap = host->ports[i]; void __iomem *port_mmio = ahci_port_base(ap); + ata_port_pbar_desc(ap, AHCI_PCI_BAR, -1, "abar"); + ata_port_pbar_desc(ap, AHCI_PCI_BAR, + 0x100 + ap->port_no * 0x80, "port"); + /* standard SATA port setup */ if (hpriv->port_map & (1 << i)) ap->ioaddr.cmd_addr = port_mmio; diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c index 9454669..9032998 100644 --- a/drivers/ata/ata_generic.c +++ b/drivers/ata/ata_generic.c @@ -34,7 +34,7 @@ /** * generic_set_mode - mode setting - * @ap: interface to set up + * @link: link to set up * @unused: returned device on error * * Use a non standard set_mode function. We don't want to be tuned. @@ -43,24 +43,24 @@ * and respect them. */ -static int generic_set_mode(struct ata_port *ap, struct ata_device **unused) +static int generic_set_mode(struct ata_link *link, struct ata_device **unused) { + struct ata_port *ap = link->ap; int dma_enabled = 0; - int i; + struct ata_device *dev; /* Bits 5 and 6 indicate if DMA is active on master/slave */ if (ap->ioaddr.bmdma_addr) dma_enabled = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); - for (i = 0; i < ATA_MAX_DEVICES; i++) { - struct ata_device *dev = &ap->device[i]; + ata_link_for_each_dev(dev, link) { if (ata_dev_enabled(dev)) { /* We don't really care */ dev->pio_mode = XFER_PIO_0; dev->dma_mode = XFER_MW_DMA_0; /* We do need the right mode information for DMA or PIO and this comes from the current configuration flags */ - if (dma_enabled & (1 << (5 + i))) { + if (dma_enabled & (1 << (5 + dev->devno))) { ata_id_to_dma_mode(dev, XFER_MW_DMA_0); dev->flags &= ~ATA_DFLAG_PIO; } else { @@ -95,7 +95,6 @@ static struct scsi_host_template generic_sht = { static struct ata_port_operations generic_port_ops = { .set_mode = generic_set_mode, - .port_disable = ata_port_disable, .tf_load = ata_tf_load, .tf_read = ata_tf_read, .check_status = ata_check_status, @@ -121,9 +120,8 @@ static struct ata_port_operations generic_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; static int all_generic_ide; /* Set to claim all devices */ diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 92c2d50..e783e67 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -123,7 +123,6 @@ enum { ich_pata_33 = 1, /* ICH up to UDMA 33 only */ ich_pata_66 = 2, /* ICH up to 66 Mhz */ ich_pata_100 = 3, /* ICH up to UDMA 100 */ - ich_pata_133 = 4, /* ICH up to UDMA 133 */ ich5_sata = 5, ich6_sata = 6, ich6_sata_ahci = 7, @@ -199,7 +198,7 @@ static const struct pci_device_id piix_pci_tbl[] = { { 0x8086, 0x24CA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, { 0x8086, 0x24CB, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, /* Intel ICH5 */ - { 0x8086, 0x24DB, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_133 }, + { 0x8086, 0x24DB, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, /* C-ICH (i810E2) */ { 0x8086, 0x245B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, /* ESB (855GME/875P + 6300ESB) UDMA 100 */ @@ -207,7 +206,7 @@ static const struct pci_device_id piix_pci_tbl[] = { /* ICH6 (and 6) (i915) UDMA 100 */ { 0x8086, 0x266F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, /* ICH7/7-R (i945, i975) UDMA 100*/ - { 0x8086, 0x27DF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_133 }, + { 0x8086, 0x27DF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, { 0x8086, 0x269E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, /* ICH8 Mobile PATA Controller */ { 0x8086, 0x2850, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, @@ -290,7 +289,6 @@ static struct scsi_host_template piix_sht = { }; static const struct ata_port_operations piix_pata_ops = { - .port_disable = ata_port_disable, .set_piomode = piix_set_piomode, .set_dmamode = piix_set_dmamode, .mode_filter = ata_pci_default_filter, @@ -318,13 +316,11 @@ static const struct ata_port_operations piix_pata_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, .port_start = ata_port_start, }; static const struct ata_port_operations ich_pata_ops = { - .port_disable = ata_port_disable, .set_piomode = piix_set_piomode, .set_dmamode = ich_set_dmamode, .mode_filter = ata_pci_default_filter, @@ -352,14 +348,11 @@ static const struct ata_port_operations ich_pata_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, .port_start = ata_port_start, }; static const struct ata_port_operations piix_sata_ops = { - .port_disable = ata_port_disable, - .tf_load = ata_tf_load, .tf_read = ata_tf_read, .check_status = ata_check_status, @@ -382,7 +375,6 @@ static const struct ata_port_operations piix_sata_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, .port_start = ata_port_start, }; @@ -445,15 +437,15 @@ static const struct piix_map_db ich8_map_db = { }; static const struct piix_map_db tolapai_map_db = { - .mask = 0x3, - .port_enable = 0x3, - .map = { - /* PM PS SM SS MAP */ - { P0, NA, P1, NA }, /* 00b */ - { RV, RV, RV, RV }, /* 01b */ - { RV, RV, RV, RV }, /* 10b */ - { RV, RV, RV, RV }, - }, + .mask = 0x3, + .port_enable = 0x3, + .map = { + /* PM PS SM SS MAP */ + { P0, NA, P1, NA }, /* 00b */ + { RV, RV, RV, RV }, /* 01b */ + { RV, RV, RV, RV }, /* 10b */ + { RV, RV, RV, RV }, + }, }; static const struct piix_map_db *piix_map_db_table[] = { @@ -466,7 +458,7 @@ static const struct piix_map_db *piix_map_db_table[] = { }; static struct ata_port_info piix_port_info[] = { - /* piix_pata_33: 0: PIIX4 at 33MHz */ + [piix_pata_33] = /* PIIX4 at 33MHz */ { .sht = &piix_sht, .flags = PIIX_PATA_FLAGS, @@ -476,7 +468,7 @@ static struct ata_port_info piix_port_info[] = { .port_ops = &piix_pata_ops, }, - /* ich_pata_33: 1 ICH0 - ICH at 33Mhz*/ + [ich_pata_33] = /* ICH0 - ICH at 33Mhz*/ { .sht = &piix_sht, .flags = PIIX_PATA_FLAGS, @@ -485,7 +477,8 @@ static struct ata_port_info piix_port_info[] = { .udma_mask = ATA_UDMA2, /* UDMA33 */ .port_ops = &ich_pata_ops, }, - /* ich_pata_66: 2 ICH controllers up to 66MHz */ + + [ich_pata_66] = /* ICH controllers up to 66MHz */ { .sht = &piix_sht, .flags = PIIX_PATA_FLAGS, @@ -495,7 +488,7 @@ static struct ata_port_info piix_port_info[] = { .port_ops = &ich_pata_ops, }, - /* ich_pata_100: 3 */ + [ich_pata_100] = { .sht = &piix_sht, .flags = PIIX_PATA_FLAGS | PIIX_FLAG_CHECKINTR, @@ -505,17 +498,7 @@ static struct ata_port_info piix_port_info[] = { .port_ops = &ich_pata_ops, }, - /* ich_pata_133: 4 ICH with full UDMA6 */ - { - .sht = &piix_sht, - .flags = PIIX_PATA_FLAGS | PIIX_FLAG_CHECKINTR, - .pio_mask = 0x1f, /* pio 0-4 */ - .mwdma_mask = 0x06, /* Check: maybe 0x07 */ - .udma_mask = ATA_UDMA6, /* UDMA133 */ - .port_ops = &ich_pata_ops, - }, - - /* ich5_sata: 5 */ + [ich5_sata] = { .sht = &piix_sht, .flags = PIIX_SATA_FLAGS, @@ -525,7 +508,7 @@ static struct ata_port_info piix_port_info[] = { .port_ops = &piix_sata_ops, }, - /* ich6_sata: 6 */ + [ich6_sata] = { .sht = &piix_sht, .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SCR, @@ -535,7 +518,7 @@ static struct ata_port_info piix_port_info[] = { .port_ops = &piix_sata_ops, }, - /* ich6_sata_ahci: 7 */ + [ich6_sata_ahci] = { .sht = &piix_sht, .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SCR | @@ -546,7 +529,7 @@ static struct ata_port_info piix_port_info[] = { .port_ops = &piix_sata_ops, }, - /* ich6m_sata_ahci: 8 */ + [ich6m_sata_ahci] = { .sht = &piix_sht, .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SCR | @@ -557,7 +540,7 @@ static struct ata_port_info piix_port_info[] = { .port_ops = &piix_sata_ops, }, - /* ich8_sata_ahci: 9 */ + [ich8_sata_ahci] = { .sht = &piix_sht, .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SCR | @@ -568,7 +551,7 @@ static struct ata_port_info piix_port_info[] = { .port_ops = &piix_sata_ops, }, - /* piix_pata_mwdma: 10: PIIX3 MWDMA only */ + [piix_pata_mwdma] = /* PIIX3 MWDMA only */ { .sht = &piix_sht, .flags = PIIX_PATA_FLAGS, @@ -577,7 +560,7 @@ static struct ata_port_info piix_port_info[] = { .port_ops = &piix_pata_ops, }, - /* tolapai_sata_ahci: 11: */ + [tolapai_sata_ahci] = { .sht = &piix_sht, .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SCR | @@ -615,6 +598,7 @@ static const struct ich_laptop ich_laptop[] = { { 0x27DF, 0x0005, 0x0280 }, /* ICH7 on Acer 5602WLMi */ { 0x27DF, 0x1025, 0x0110 }, /* ICH7 on Acer 3682WLMi */ { 0x27DF, 0x1043, 0x1267 }, /* ICH7 on Asus W5F */ + { 0x27DF, 0x103C, 0x30A1 }, /* ICH7 on HP Compaq nc2400 */ { 0x24CA, 0x1025, 0x0061 }, /* ICH4 on ACER Aspire 2023WLMi */ /* end marker */ { 0, } @@ -657,19 +641,20 @@ static int ich_pata_cable_detect(struct ata_port *ap) /** * piix_pata_prereset - prereset for PATA host controller - * @ap: Target port + * @link: Target link * @deadline: deadline jiffies for the operation * * LOCKING: * None (inherited from caller). */ -static int piix_pata_prereset(struct ata_port *ap, unsigned long deadline) +static int piix_pata_prereset(struct ata_link *link, unsigned long deadline) { + struct ata_port *ap = link->ap; struct pci_dev *pdev = to_pci_dev(ap->host->dev); if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->port_no])) return -ENOENT; - return ata_std_prereset(ap, deadline); + return ata_std_prereset(link, deadline); } static void piix_pata_error_handler(struct ata_port *ap) diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c index c059f78..3f75335 100644 --- a/drivers/ata/libata-acpi.c +++ b/drivers/ata/libata-acpi.c @@ -14,6 +14,7 @@ #include <linux/acpi.h> #include <linux/libata.h> #include <linux/pci.h> +#include <scsi/scsi_device.h> #include "libata.h" #include <acpi/acpi_bus.h> @@ -40,11 +41,40 @@ static int is_pci_dev(struct device *dev) return (dev->bus == &pci_bus_type); } -static void ata_acpi_associate_sata_port(struct ata_port *ap) +/** + * ata_acpi_associate_sata_port - associate SATA port with ACPI objects + * @ap: target SATA port + * + * Look up ACPI objects associated with @ap and initialize acpi_handle + * fields of @ap, the port and devices accordingly. + * + * LOCKING: + * EH context. + * + * RETURNS: + * 0 on success, -errno on failure. + */ +void ata_acpi_associate_sata_port(struct ata_port *ap) { - acpi_integer adr = SATA_ADR(ap->port_no, NO_PORT_MULT); + WARN_ON(!(ap->flags & ATA_FLAG_ACPI_SATA)); + + if (!ap->nr_pmp_links) { + acpi_integer adr = SATA_ADR(ap->port_no, NO_PORT_MULT); + + ap->link.device->acpi_handle = + acpi_get_child(ap->host->acpi_handle, adr); + } else { + struct ata_link *link; + + ap->link.device->acpi_handle = NULL; - ap->device->acpi_handle = acpi_get_child(ap->host->acpi_handle, adr); + ata_port_for_each_link(link, ap) { + acpi_integer adr = SATA_ADR(ap->port_no, link->pmp); + + link->device->acpi_handle = + acpi_get_child(ap->host->acpi_handle, adr); + } + } } static void ata_acpi_associate_ide_port(struct ata_port *ap) @@ -60,12 +90,53 @@ static void ata_acpi_associate_ide_port(struct ata_port *ap) max_devices++; for (i = 0; i < max_devices; i++) { - struct ata_device *dev = &ap->device[i]; + struct ata_device *dev = &ap->link.device[i]; dev->acpi_handle = acpi_get_child(ap->acpi_handle, i); } } +static void ata_acpi_handle_hotplug (struct ata_port *ap, struct kobject *kobj, + u32 event) +{ + char event_string[12]; + char *envp[] = { event_string, NULL }; + struct ata_eh_info *ehi = &ap->link.eh_info; + + if (event == 0 || event == 1) { + unsigned long flags; + spin_lock_irqsave(ap->lock, flags); + ata_ehi_clear_desc(ehi); + ata_ehi_push_desc(ehi, "ACPI event"); + ata_ehi_hotplugged(ehi); + ata_port_freeze(ap); + spin_unlock_irqrestore(ap->lock, flags); + } + + if (kobj) { + sprintf(event_string, "BAY_EVENT=%d", event); + kobject_uevent_env(kobj, KOBJ_CHANGE, envp); + } +} + +static void ata_acpi_dev_notify(acpi_handle handle, u32 event, void *data) +{ + struct ata_device *dev = data; + struct kobject *kobj = NULL; + + if (dev->sdev) + kobj = &dev->sdev->sdev_gendev.kobj; + + ata_acpi_handle_hotplug (dev->link->ap, kobj, event); +} + +static void ata_acpi_ap_notify(acpi_handle handle, u32 event, void *data) +{ + struct ata_port *ap = data; + + ata_acpi_handle_hotplug (ap, &ap->dev->kobj, event); +} + /** * ata_acpi_associate - associate ATA host with ACPI objects * @host: target ATA host @@ -81,7 +152,7 @@ static void ata_acpi_associate_ide_port(struct ata_port *ap) */ void ata_acpi_associate(struct ata_host *host) { - int i; + int i, j; if (!is_pci_dev(host->dev) || libata_noacpi) return; @@ -97,6 +168,22 @@ void ata_acpi_associate(struct ata_host *host) ata_acpi_associate_sata_port(ap); else ata_acpi_associate_ide_port(ap); + + if (ap->acpi_handle) + acpi_install_notify_handler (ap->acpi_handle, + ACPI_SYSTEM_NOTIFY, + ata_acpi_ap_notify, + ap); + + for (j = 0; j < ata_link_max_devices(&ap->link); j++) { + struct ata_device *dev = &ap->link.device[j]; + + if (dev->acpi_handle) + acpi_install_notify_handler (dev->acpi_handle, + ACPI_SYSTEM_NOTIFY, + ata_acpi_dev_notify, + dev); + } } } @@ -113,7 +200,7 @@ void ata_acpi_associate(struct ata_host *host) * RETURNS: * 0 on success, -ENOENT if _GTM doesn't exist, -errno on failure. */ -static int ata_acpi_gtm(const struct ata_port *ap, struct ata_acpi_gtm *gtm) +int ata_acpi_gtm(const struct ata_port *ap, struct ata_acpi_gtm *gtm) { struct acpi_buffer output = { .length = ACPI_ALLOCATE_BUFFER }; union acpi_object *out_obj; @@ -157,6 +244,8 @@ static int ata_acpi_gtm(const struct ata_port *ap, struct ata_acpi_gtm *gtm) return rc; } +EXPORT_SYMBOL_GPL(ata_acpi_gtm); + /** * ata_acpi_stm - execute _STM * @ap: target ATA port @@ -170,7 +259,7 @@ static int ata_acpi_gtm(const struct ata_port *ap, struct ata_acpi_gtm *gtm) * RETURNS: * 0 on success, -ENOENT if _STM doesn't exist, -errno on failure. */ -static int ata_acpi_stm(const struct ata_port *ap, struct ata_acpi_gtm *stm) +int ata_acpi_stm(const struct ata_port *ap, struct ata_acpi_gtm *stm) { acpi_status status; struct acpi_object_list input; @@ -182,10 +271,10 @@ static int ata_acpi_stm(const struct ata_port *ap, struct ata_acpi_gtm *stm) /* Buffers for id may need byteswapping ? */ in_params[1].type = ACPI_TYPE_BUFFER; in_params[1].buffer.length = 512; - in_params[1].buffer.pointer = (u8 *)ap->device[0].id; + in_params[1].buffer.pointer = (u8 *)ap->link.device[0].id; in_params[2].type = ACPI_TYPE_BUFFER; in_params[2].buffer.length = 512; - in_params[2].buffer.pointer = (u8 *)ap->device[1].id; + in_params[2].buffer.pointer = (u8 *)ap->link.device[1].id; input.count = 3; input.pointer = in_params; @@ -202,6 +291,8 @@ static int ata_acpi_stm(const struct ata_port *ap, struct ata_acpi_gtm *stm) return 0; } +EXPORT_SYMBOL_GPL(ata_acpi_stm); + /** * ata_dev_get_GTF - get the drive bootup default taskfile settings * @dev: target ATA device @@ -226,7 +317,7 @@ static int ata_acpi_stm(const struct ata_port *ap, struct ata_acpi_gtm *stm) static int ata_dev_get_GTF(struct ata_device *dev, struct ata_acpi_gtf **gtf, void **ptr_to_free) { - struct ata_port *ap = dev->ap; + struct ata_port *ap = dev->link->ap; acpi_status status; struct acpi_buffer output; union acpi_object *out_obj; @@ -296,6 +387,44 @@ static int ata_dev_get_GTF(struct ata_device *dev, struct ata_acpi_gtf **gtf, } /** + * ata_acpi_cbl_80wire - Check for 80 wire cable + * @ap: Port to check + * + * Return 1 if the ACPI mode data for this port indicates the BIOS selected + * an 80wire mode. + */ + +int ata_acpi_cbl_80wire(struct ata_port *ap) +{ + struct ata_acpi_gtm gtm; + int valid = 0; + + /* No _GTM data, no information */ + if (ata_acpi_gtm(ap, >m) < 0) + return 0; + + /* Split timing, DMA enabled */ + if ((gtm.flags & 0x11) == 0x11 && gtm.drive[0].dma < 55) + valid |= 1; + if ((gtm.flags & 0x14) == 0x14 && gtm.drive[1].dma < 55) + valid |= 2; + /* Shared timing, DMA enabled */ + if ((gtm.flags & 0x11) == 0x01 && gtm.drive[0].dma < 55) + valid |= 1; + if ((gtm.flags & 0x14) == 0x04 && gtm.drive[0].dma < 55) + valid |= 2; + + /* Drive check */ + if ((valid & 1) && ata_dev_enabled(&ap->link.device[0])) + return 1; + if ((valid & 2) && ata_dev_enabled(&ap->link.device[1])) + return 1; + return 0; +} + +EXPORT_SYMBOL_GPL(ata_acpi_cbl_80wire); + +/** * taskfile_load_raw - send taskfile registers to host controller * @dev: target ATA device * @gtf: raw ATA taskfile register set (0x1f1 - 0x1f7) @@ -320,7 +449,7 @@ static int ata_dev_get_GTF(struct ata_device *dev, struct ata_acpi_gtf **gtf, static int taskfile_load_raw(struct ata_device *dev, const struct ata_acpi_gtf *gtf) { - struct ata_port *ap = dev->ap; + struct ata_port *ap = dev->link->ap; struct ata_taskfile tf, rtf; unsigned int err_mask; @@ -349,7 +478,7 @@ static int taskfile_load_raw(struct ata_device *dev, tf.lbal, tf.lbam, tf.lbah, tf.device); rtf = tf; - err_mask = ata_exec_internal(dev, &rtf, NULL, DMA_NONE, NULL, 0); + err_mask = ata_exec_internal(dev, &rtf, NULL, DMA_NONE, NULL, 0, 0); if (err_mask) { ata_dev_printk(dev, KERN_ERR, "ACPI cmd %02x/%02x:%02x:%02x:%02x:%02x:%02x failed " @@ -424,7 +553,7 @@ static int ata_acpi_exec_tfs(struct ata_device *dev) */ static int ata_acpi_push_id(struct ata_device *dev) { - struct ata_port *ap = dev->ap; + struct ata_port *ap = dev->link->ap; int err; acpi_status status; struct acpi_object_list input; @@ -508,7 +637,7 @@ int ata_acpi_on_suspend(struct ata_port *ap) */ void ata_acpi_on_resume(struct ata_port *ap) { - int i; + struct ata_device *dev; if (ap->acpi_handle && (ap->pflags & ATA_PFLAG_GTM_VALID)) { BUG_ON(ap->flags & ATA_FLAG_ACPI_SATA); @@ -518,8 +647,8 @@ void ata_acpi_on_resume(struct ata_port *ap) } /* schedule _GTF */ - for (i = 0; i < ATA_MAX_DEVICES; i++) - ap->device[i].flags |= ATA_DFLAG_ACPI_PENDING; + ata_link_for_each_dev(dev, &ap->link) + dev->flags |= ATA_DFLAG_ACPI_PENDING; } /** @@ -538,8 +667,8 @@ void ata_acpi_on_resume(struct ata_port *ap) */ int ata_acpi_on_devcfg(struct ata_device *dev) { - struct ata_port *ap = dev->ap; - struct ata_eh_context *ehc = &ap->eh_context; + struct ata_port *ap = dev->link->ap; + struct ata_eh_context *ehc = &ap->link.eh_context; int acpi_sata = ap->flags & ATA_FLAG_ACPI_SATA; int rc; diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 772be09..b05384a 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -59,8 +59,6 @@ #include "libata.h" -#define DRV_VERSION "2.21" /* must be exactly four chars */ - /* debounce timing parameters in msecs { interval, duration, timeout } */ const unsigned long sata_deb_timing_normal[] = { 5, 100, 2000 }; @@ -70,6 +68,7 @@ const unsigned long sata_deb_timing_long[] = { 100, 2000, 5000 }; static unsigned int ata_dev_init_params(struct ata_device *dev, u16 heads, u16 sectors); static unsigned int ata_dev_set_xfermode(struct ata_device *dev); +static unsigned int ata_dev_set_AN(struct ata_device *dev, u8 enable); static void ata_dev_xfermask(struct ata_device *dev); static unsigned long ata_dev_blacklisted(const struct ata_device *dev); @@ -86,6 +85,10 @@ int atapi_dmadir = 0; module_param(atapi_dmadir, int, 0444); MODULE_PARM_DESC(atapi_dmadir, "Enable ATAPI DMADIR bridge support (0=off, 1=on)"); +int atapi_passthru16 = 1; +module_param(atapi_passthru16, int, 0444); +MODULE_PARM_DESC(atapi_passthru16, "Enable ATA_16 passthru for ATAPI devices; on by default (0=off, 1=on)"); + int libata_fua = 0; module_param_named(fua, libata_fua, int, 0444); MODULE_PARM_DESC(fua, "FUA support (0=off, 1=on)"); @@ -94,13 +97,17 @@ static int ata_ignore_hpa = 0; module_param_named(ignore_hpa, ata_ignore_hpa, int, 0644); MODULE_PARM_DESC(ignore_hpa, "Ignore HPA limit (0=keep BIOS limits, 1=ignore limits, using full disk)"); +static int libata_dma_mask = ATA_DMA_MASK_ATA|ATA_DMA_MASK_ATAPI|ATA_DMA_MASK_CFA; +module_param_named(dma, libata_dma_mask, int, 0444); +MODULE_PARM_DESC(dma, "DMA enable/disable (0x1==ATA, 0x2==ATAPI, 0x4==CF)"); + static int ata_probe_timeout = ATA_TMOUT_INTERNAL / HZ; module_param(ata_probe_timeout, int, 0444); MODULE_PARM_DESC(ata_probe_timeout, "Set ATA probing timeout (seconds)"); -int libata_noacpi = 1; +int libata_noacpi = 0; module_param_named(noacpi, libata_noacpi, int, 0444); -MODULE_PARM_DESC(noacpi, "Disables the use of ACPI in suspend/resume when set"); +MODULE_PARM_DESC(noacpi, "Disables the use of ACPI in probe/suspend/resume when set"); MODULE_AUTHOR("Jeff Garzik"); MODULE_DESCRIPTION("Library module for ATA devices"); @@ -235,7 +242,7 @@ static int ata_rwcmd_protocol(struct ata_taskfile *tf, struct ata_device *dev) if (dev->flags & ATA_DFLAG_PIO) { tf->protocol = ATA_PROT_PIO; index = dev->multi_count ? 0 : 8; - } else if (lba48 && (dev->ap->flags & ATA_FLAG_PIO_LBA48)) { + } else if (lba48 && (dev->link->ap->flags & ATA_FLAG_PIO_LBA48)) { /* Unable to use DMA due to host limitation */ tf->protocol = ATA_PROT_PIO; index = dev->multi_count ? 0 : 8; @@ -604,7 +611,7 @@ static const char *sata_spd_string(unsigned int spd) void ata_dev_disable(struct ata_device *dev) { if (ata_dev_enabled(dev)) { - if (ata_msg_drv(dev->ap)) + if (ata_msg_drv(dev->link->ap)) ata_dev_printk(dev, KERN_WARNING, "disabled\n"); ata_down_xfermask_limit(dev, ATA_DNXFER_FORCE_PIO0 | ATA_DNXFER_QUIET); @@ -667,37 +674,57 @@ static unsigned int ata_devchk(struct ata_port *ap, unsigned int device) * None. * * RETURNS: - * Device type, %ATA_DEV_ATA, %ATA_DEV_ATAPI, or %ATA_DEV_UNKNOWN - * the event of failure. + * Device type, %ATA_DEV_ATA, %ATA_DEV_ATAPI, %ATA_DEV_PMP or + * %ATA_DEV_UNKNOWN the event of failure. */ - unsigned int ata_dev_classify(const struct ata_taskfile *tf) { /* Apple's open source Darwin code hints that some devices only * put a proper signature into the LBA mid/high registers, * So, we only check those. It's sufficient for uniqueness. + * + * ATA/ATAPI-7 (d1532v1r1: Feb. 19, 2003) specified separate + * signatures for ATA and ATAPI devices attached on SerialATA, + * 0x3c/0xc3 and 0x69/0x96 respectively. However, SerialATA + * spec has never mentioned about using different signatures + * for ATA/ATAPI devices. Then, Serial ATA II: Port + * Multiplier specification began to use 0x69/0x96 to identify + * port multpliers and 0x3c/0xc3 to identify SEMB device. + * ATA/ATAPI-7 dropped descriptions about 0x3c/0xc3 and + * 0x69/0x96 shortly and described them as reserved for + * SerialATA. + * + * We follow the current spec and consider that 0x69/0x96 + * identifies a port multiplier and 0x3c/0xc3 a SEMB device. */ - - if (((tf->lbam == 0) && (tf->lbah == 0)) || - ((tf->lbam == 0x3c) && (tf->lbah == 0xc3))) { + if ((tf->lbam == 0) && (tf->lbah == 0)) { DPRINTK("found ATA device by sig\n"); return ATA_DEV_ATA; } - if (((tf->lbam == 0x14) && (tf->lbah == 0xeb)) || - ((tf->lbam == 0x69) && (tf->lbah == 0x96))) { + if ((tf->lbam == 0x14) && (tf->lbah == 0xeb)) { DPRINTK("found ATAPI device by sig\n"); return ATA_DEV_ATAPI; } + if ((tf->lbam == 0x69) && (tf->lbah == 0x96)) { + DPRINTK("found PMP device by sig\n"); + return ATA_DEV_PMP; + } + + if ((tf->lbam == 0x3c) && (tf->lbah == 0xc3)) { + printk("ata: SEMB device ignored\n"); + return ATA_DEV_SEMB_UNSUP; /* not yet */ + } + DPRINTK("unknown device\n"); return ATA_DEV_UNKNOWN; } /** * ata_dev_try_classify - Parse returned ATA device signature - * @ap: ATA channel to examine - * @device: Device to examine (starting at zero) + * @dev: ATA device to classify (starting at zero) + * @present: device seems present * @r_err: Value of error register on completion * * After an event -- SRST, E.D.D., or SATA COMRESET -- occurs, @@ -715,15 +742,15 @@ unsigned int ata_dev_classify(const struct ata_taskfile *tf) * RETURNS: * Device type - %ATA_DEV_ATA, %ATA_DEV_ATAPI or %ATA_DEV_NONE. */ - -unsigned int -ata_dev_try_classify(struct ata_port *ap, unsigned int device, u8 *r_err) +unsigned int ata_dev_try_classify(struct ata_device *dev, int present, + u8 *r_err) { + struct ata_port *ap = dev->link->ap; struct ata_taskfile tf; unsigned int class; u8 err; - ap->ops->dev_select(ap, device); + ap->ops->dev_select(ap, dev->devno); memset(&tf, 0, sizeof(tf)); @@ -733,12 +760,12 @@ ata_dev_try_classify(struct ata_port *ap, unsigned int device, u8 *r_err) *r_err = err; /* see if device passed diags: if master then continue and warn later */ - if (err == 0 && device == 0) + if (err == 0 && dev->devno == 0) /* diagnostic fail : do nothing _YET_ */ - ap->device[device].horkage |= ATA_HORKAGE_DIAGNOSTIC; + dev->horkage |= ATA_HORKAGE_DIAGNOSTIC; else if (err == 1) /* do nothing */ ; - else if ((device == 0) && (err == 0x81)) + else if ((dev->devno == 0) && (err == 0x81)) /* do nothing */ ; else return ATA_DEV_NONE; @@ -746,10 +773,20 @@ ata_dev_try_classify(struct ata_port *ap, unsigned int device, u8 *r_err) /* determine if device is ATA or ATAPI */ class = ata_dev_classify(&tf); - if (class == ATA_DEV_UNKNOWN) - return ATA_DEV_NONE; - if ((class == ATA_DEV_ATA) && (ata_chk_status(ap) == 0)) - return ATA_DEV_NONE; + if (class == ATA_DEV_UNKNOWN) { + /* If the device failed diagnostic, it's likely to + * have reported incorrect device signature too. + * Assume ATA device if the device seems present but + * device signature is invalid with diagnostic + * failure. + */ + if (present && (dev->horkage & ATA_HORKAGE_DIAGNOSTIC)) + class = ATA_DEV_ATA; + else + class = ATA_DEV_NONE; + } else if ((class == ATA_DEV_ATA) && (ata_chk_status(ap) == 0)) + class = ATA_DEV_NONE; + return class; } @@ -816,6 +853,21 @@ void ata_id_c_string(const u16 *id, unsigned char *s, *p = '\0'; } +static u64 ata_id_n_sectors(const u16 *id) +{ + if (ata_id_has_lba(id)) { + if (ata_id_has_lba48(id)) + return ata_id_u64(id, 100); + else + return ata_id_u32(id, 60); + } else { + if (ata_id_current_chs_valid(id)) + return ata_id_u32(id, 57); + else + return id[1] * id[3] * id[6]; + } +} + static u64 ata_tf_to_lba48(struct ata_taskfile *tf) { u64 sectors = 0; @@ -843,129 +895,110 @@ static u64 ata_tf_to_lba(struct ata_taskfile *tf) } /** - * ata_read_native_max_address_ext - LBA48 native max query - * @dev: Device to query + * ata_read_native_max_address - Read native max address + * @dev: target device + * @max_sectors: out parameter for the result native max address * - * Perform an LBA48 size query upon the device in question. Return the - * actual LBA48 size or zero if the command fails. - */ - -static u64 ata_read_native_max_address_ext(struct ata_device *dev) -{ - unsigned int err; - struct ata_taskfile tf; - - ata_tf_init(dev, &tf); - - tf.command = ATA_CMD_READ_NATIVE_MAX_EXT; - tf.flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_LBA48 | ATA_TFLAG_ISADDR; - tf.protocol |= ATA_PROT_NODATA; - tf.device |= 0x40; - - err = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0); - if (err) - return 0; - - return ata_tf_to_lba48(&tf); -} - -/** - * ata_read_native_max_address - LBA28 native max query - * @dev: Device to query + * Perform an LBA48 or LBA28 native size query upon the device in + * question. * - * Performa an LBA28 size query upon the device in question. Return the - * actual LBA28 size or zero if the command fails. + * RETURNS: + * 0 on success, -EACCES if command is aborted by the drive. + * -EIO on other errors. */ - -static u64 ata_read_native_max_address(struct ata_device *dev) +static int ata_read_native_max_address(struct ata_device *dev, u64 *max_sectors) { - unsigned int err; + unsigned int err_mask; struct ata_taskfile tf; + int lba48 = ata_id_has_lba48(dev->id); ata_tf_init(dev, &tf); - tf.command = ATA_CMD_READ_NATIVE_MAX; + /* always clear all address registers */ tf.flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR; + + if (lba48) { + tf.command = ATA_CMD_READ_NATIVE_MAX_EXT; + tf.flags |= ATA_TFLAG_LBA48; + } else + tf.command = ATA_CMD_READ_NATIVE_MAX; + tf.protocol |= ATA_PROT_NODATA; - tf.device |= 0x40; + tf.device |= ATA_LBA; - err = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0); - if (err) - return 0; + err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0); + if (err_mask) { + ata_dev_printk(dev, KERN_WARNING, "failed to read native " + "max address (err_mask=0x%x)\n", err_mask); + if (err_mask == AC_ERR_DEV && (tf.feature & ATA_ABORTED)) + return -EACCES; + return -EIO; + } - return ata_tf_to_lba(&tf); + if (lba48) + *max_sectors = ata_tf_to_lba48(&tf); + else + *max_sectors = ata_tf_to_lba(&tf); + if (dev->horkage & ATA_HORKAGE_HPA_SIZE) + (*max_sectors)--; + return 0; } /** - * ata_set_native_max_address_ext - LBA48 native max set - * @dev: Device to query + * ata_set_max_sectors - Set max sectors + * @dev: target device * @new_sectors: new max sectors value to set for the device * - * Perform an LBA48 size set max upon the device in question. Return the - * actual LBA48 size or zero if the command fails. + * Set max sectors of @dev to @new_sectors. + * + * RETURNS: + * 0 on success, -EACCES if command is aborted or denied (due to + * previous non-volatile SET_MAX) by the drive. -EIO on other + * errors. */ - -static u64 ata_set_native_max_address_ext(struct ata_device *dev, u64 new_sectors) +static int ata_set_max_sectors(struct ata_device *dev, u64 new_sectors) { - unsigned int err; + unsigned int err_mask; struct ata_taskfile tf; + int lba48 = ata_id_has_lba48(dev->id); new_sectors--; ata_tf_init(dev, &tf); - tf.command = ATA_CMD_SET_MAX_EXT; - tf.flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_LBA48 | ATA_TFLAG_ISADDR; - tf.protocol |= ATA_PROT_NODATA; - tf.device |= 0x40; - - tf.lbal = (new_sectors >> 0) & 0xff; - tf.lbam = (new_sectors >> 8) & 0xff; - tf.lbah = (new_sectors >> 16) & 0xff; - - tf.hob_lbal = (new_sectors >> 24) & 0xff; - tf.hob_lbam = (new_sectors >> 32) & 0xff; - tf.hob_lbah = (new_sectors >> 40) & 0xff; - - err = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0); - if (err) - return 0; - - return ata_tf_to_lba48(&tf); -} - -/** - * ata_set_native_max_address - LBA28 native max set - * @dev: Device to query - * @new_sectors: new max sectors value to set for the device - * - * Perform an LBA28 size set max upon the device in question. Return the - * actual LBA28 size or zero if the command fails. - */ + tf.flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR; -static u64 ata_set_native_max_address(struct ata_device *dev, u64 new_sectors) -{ - unsigned int err; - struct ata_taskfile tf; + if (lba48) { + tf.command = ATA_CMD_SET_MAX_EXT; + tf.flags |= ATA_TFLAG_LBA48; - new_sectors--; + tf.hob_lbal = (new_sectors >> 24) & 0xff; + tf.hob_lbam = (new_sectors >> 32) & 0xff; + tf.hob_lbah = (new_sectors >> 40) & 0xff; + } else { + tf.command = ATA_CMD_SET_MAX; - ata_tf_init(dev, &tf); + tf.device |= (new_sectors >> 24) & 0xf; + } - tf.command = ATA_CMD_SET_MAX; - tf.flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR; tf.protocol |= ATA_PROT_NODATA; + tf.device |= ATA_LBA; tf.lbal = (new_sectors >> 0) & 0xff; tf.lbam = (new_sectors >> 8) & 0xff; tf.lbah = (new_sectors >> 16) & 0xff; - tf.device |= ((new_sectors >> 24) & 0x0f) | 0x40; - err = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0); - if (err) - return 0; + err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0); + if (err_mask) { + ata_dev_printk(dev, KERN_WARNING, "failed to set " + "max address (err_mask=0x%x)\n", err_mask); + if (err_mask == AC_ERR_DEV && + (tf.feature & (ATA_ABORTED | ATA_IDNF))) + return -EACCES; + return -EIO; + } - return ata_tf_to_lba(&tf); + return 0; } /** @@ -975,60 +1008,93 @@ static u64 ata_set_native_max_address(struct ata_device *dev, u64 new_sectors) * Read the size of an LBA28 or LBA48 disk with HPA features and resize * it if required to the full size of the media. The caller must check * the drive has the HPA feature set enabled. + * + * RETURNS: + * 0 on success, -errno on failure. */ - -static u64 ata_hpa_resize(struct ata_device *dev) +static int ata_hpa_resize(struct ata_device *dev) { - u64 sectors = dev->n_sectors; - u64 hpa_sectors; + struct ata_eh_context *ehc = &dev->link->eh_context; + int print_info = ehc->i.flags & ATA_EHI_PRINTINFO; + u64 sectors = ata_id_n_sectors(dev->id); + u64 native_sectors; + int rc; - if (ata_id_has_lba48(dev->id)) - hpa_sectors = ata_read_native_max_address_ext(dev); - else - hpa_sectors = ata_read_native_max_address(dev); + /* do we need to do it? */ + if (dev->class != ATA_DEV_ATA || + !ata_id_has_lba(dev->id) || !ata_id_hpa_enabled(dev->id) || + (dev->horkage & ATA_HORKAGE_BROKEN_HPA)) + return 0; - if (hpa_sectors > sectors) { - ata_dev_printk(dev, KERN_INFO, - "Host Protected Area detected:\n" - "\tcurrent size: %lld sectors\n" - "\tnative size: %lld sectors\n", - (long long)sectors, (long long)hpa_sectors); - - if (ata_ignore_hpa) { - if (ata_id_has_lba48(dev->id)) - hpa_sectors = ata_set_native_max_address_ext(dev, hpa_sectors); - else - hpa_sectors = ata_set_native_max_address(dev, - hpa_sectors); - - if (hpa_sectors) { - ata_dev_printk(dev, KERN_INFO, "native size " - "increased to %lld sectors\n", - (long long)hpa_sectors); - return hpa_sectors; - } + /* read native max address */ + rc = ata_read_native_max_address(dev, &native_sectors); + if (rc) { + /* If HPA isn't going to be unlocked, skip HPA + * resizing from the next try. + */ + if (!ata_ignore_hpa) { + ata_dev_printk(dev, KERN_WARNING, "HPA support seems " + "broken, will skip HPA handling\n"); + dev->horkage |= ATA_HORKAGE_BROKEN_HPA; + + /* we can continue if device aborted the command */ + if (rc == -EACCES) + rc = 0; } - } else if (hpa_sectors < sectors) - ata_dev_printk(dev, KERN_WARNING, "%s 1: hpa sectors (%lld) " - "is smaller than sectors (%lld)\n", __FUNCTION__, - (long long)hpa_sectors, (long long)sectors); - return sectors; -} + return rc; + } -static u64 ata_id_n_sectors(const u16 *id) -{ - if (ata_id_has_lba(id)) { - if (ata_id_has_lba48(id)) - return ata_id_u64(id, 100); - else - return ata_id_u32(id, 60); - } else { - if (ata_id_current_chs_valid(id)) - return ata_id_u32(id, 57); - else - return id[1] * id[3] * id[6]; + /* nothing to do? */ + if (native_sectors <= sectors || !ata_ignore_hpa) { + if (!print_info || native_sectors == sectors) + return 0; + + if (native_sectors > sectors) + ata_dev_printk(dev, KERN_INFO, + "HPA detected: current %llu, native %llu\n", + (unsigned long long)sectors, + (unsigned long long)native_sectors); + else if (native_sectors < sectors) + ata_dev_printk(dev, KERN_WARNING, + "native sectors (%llu) is smaller than " + "sectors (%llu)\n", + (unsigned long long)native_sectors, + (unsigned long long)sectors); + return 0; } + + /* let's unlock HPA */ + rc = ata_set_max_sectors(dev, native_sectors); + if (rc == -EACCES) { + /* if device aborted the command, skip HPA resizing */ + ata_dev_printk(dev, KERN_WARNING, "device aborted resize " + "(%llu -> %llu), skipping HPA handling\n", + (unsigned long long)sectors, + (unsigned long long)native_sectors); + dev->horkage |= ATA_HORKAGE_BROKEN_HPA; + return 0; + } else if (rc) + return rc; + + /* re-read IDENTIFY data */ + rc = ata_dev_reread_id(dev, 0); + if (rc) { + ata_dev_printk(dev, KERN_ERR, "failed to re-read IDENTIFY " + "data after HPA resizing\n"); + return rc; + } + + if (print_info) { + u64 new_sectors = ata_id_n_sectors(dev->id); + ata_dev_printk(dev, KERN_INFO, + "HPA unlocked: %llu -> %llu, native %llu\n", + (unsigned long long)sectors, + (unsigned long long)new_sectors, + (unsigned long long)native_sectors); + } + + return 0; } /** @@ -1150,7 +1216,7 @@ void ata_dev_select(struct ata_port *ap, unsigned int device, ap->ops->dev_select(ap, device); if (wait) { - if (can_sleep && ap->device[device].class == ATA_DEV_ATAPI) + if (can_sleep && ap->link.device[device].class == ATA_DEV_ATAPI) msleep(150); ata_wait_idle(ap); } @@ -1328,6 +1394,7 @@ static void ata_qc_complete_internal(struct ata_queued_cmd *qc) * @dma_dir: Data tranfer direction of the command * @sg: sg list for the data buffer of the command * @n_elem: Number of sg entries + * @timeout: Timeout in msecs (0 for default) * * Executes libata internal command with timeout. @tf contains * command on entry and result on return. Timeout and error @@ -1344,13 +1411,15 @@ static void ata_qc_complete_internal(struct ata_queued_cmd *qc) unsigned ata_exec_internal_sg(struct ata_device *dev, struct ata_taskfile *tf, const u8 *cdb, int dma_dir, struct scatterlist *sg, - unsigned int n_elem) + unsigned int n_elem, unsigned long timeout) { - struct ata_port *ap = dev->ap; + struct ata_link *link = dev->link; + struct ata_port *ap = link->ap; u8 command = tf->command; struct ata_queued_cmd *qc; unsigned int tag, preempted_tag; u32 preempted_sactive, preempted_qc_active; + int preempted_nr_active_links; DECLARE_COMPLETION_ONSTACK(wait); unsigned long flags; unsigned int err_mask; @@ -1386,12 +1455,14 @@ unsigned ata_exec_internal_sg(struct ata_device *dev, qc->dev = dev; ata_qc_reinit(qc); - preempted_tag = ap->active_tag; - preempted_sactive = ap->sactive; + preempted_tag = link->active_tag; + preempted_sactive = link->sactive; preempted_qc_active = ap->qc_active; - ap->active_tag = ATA_TAG_POISON; - ap->sactive = 0; + preempted_nr_active_links = ap->nr_active_links; + link->active_tag = ATA_TAG_POISON; + link->sactive = 0; ap->qc_active = 0; + ap->nr_active_links = 0; /* prepare & issue qc */ qc->tf = *tf; @@ -1416,7 +1487,10 @@ unsigned ata_exec_internal_sg(struct ata_device *dev, spin_unlock_irqrestore(ap->lock, flags); - rc = wait_for_completion_timeout(&wait, ata_probe_timeout); + if (!timeout) + timeout = ata_probe_timeout * 1000 / HZ; + + rc = wait_for_completion_timeout(&wait, msecs_to_jiffies(timeout)); ata_port_flush_task(ap); @@ -1467,9 +1541,10 @@ unsigned ata_exec_internal_sg(struct ata_device *dev, err_mask = qc->err_mask; ata_qc_free(qc); - ap->active_tag = preempted_tag; - ap->sactive = preempted_sactive; + link->active_tag = preempted_tag; + link->sactive = preempted_sactive; ap->qc_active = preempted_qc_active; + ap->nr_active_links = preempted_nr_active_links; /* XXX - Some LLDDs (sata_mv) disable port on command failure. * Until those drivers are fixed, we detect the condition @@ -1500,6 +1575,7 @@ unsigned ata_exec_internal_sg(struct ata_device *dev, * @dma_dir: Data tranfer direction of the command * @buf: Data buffer of the command * @buflen: Length of data buffer + * @timeout: Timeout in msecs (0 for default) * * Wrapper around ata_exec_internal_sg() which takes simple * buffer instead of sg list. @@ -1512,7 +1588,8 @@ unsigned ata_exec_internal_sg(struct ata_device *dev, */ unsigned ata_exec_internal(struct ata_device *dev, struct ata_taskfile *tf, const u8 *cdb, - int dma_dir, void *buf, unsigned int buflen) + int dma_dir, void *buf, unsigned int buflen, + unsigned long timeout) { struct scatterlist *psg = NULL, sg; unsigned int n_elem = 0; @@ -1524,7 +1601,8 @@ unsigned ata_exec_internal(struct ata_device *dev, n_elem++; } - return ata_exec_internal_sg(dev, tf, cdb, dma_dir, psg, n_elem); + return ata_exec_internal_sg(dev, tf, cdb, dma_dir, psg, n_elem, + timeout); } /** @@ -1551,7 +1629,7 @@ unsigned int ata_do_simple_cmd(struct ata_device *dev, u8 cmd) tf.flags |= ATA_TFLAG_DEVICE; tf.protocol = ATA_PROT_NODATA; - return ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0); + return ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0); } /** @@ -1566,7 +1644,7 @@ unsigned int ata_pio_need_iordy(const struct ata_device *adev) { /* Controller doesn't support IORDY. Probably a pointless check as the caller should know this */ - if (adev->ap->flags & ATA_FLAG_NO_IORDY) + if (adev->link->ap->flags & ATA_FLAG_NO_IORDY) return 0; /* PIO3 and higher it is mandatory */ if (adev->pio_mode > XFER_PIO_2) @@ -1613,6 +1691,9 @@ static u32 ata_pio_mask_no_iordy(const struct ata_device *adev) * devices. This function also issues ATA_CMD_INIT_DEV_PARAMS * for pre-ATA4 drives. * + * FIXME: ATA_CMD_ID_ATA is optional for early drives and right + * now we abort if we hit that case. + * * LOCKING: * Kernel thread context (may sleep) * @@ -1622,7 +1703,7 @@ static u32 ata_pio_mask_no_iordy(const struct ata_device *adev) int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class, unsigned int flags, u16 *id) { - struct ata_port *ap = dev->ap; + struct ata_port *ap = dev->link->ap; unsigned int class = *p_class; struct ata_taskfile tf; unsigned int err_mask = 0; @@ -1663,7 +1744,7 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class, tf.flags |= ATA_TFLAG_POLLING; err_mask = ata_exec_internal(dev, &tf, NULL, DMA_FROM_DEVICE, - id, sizeof(id[0]) * ATA_ID_WORDS); + id, sizeof(id[0]) * ATA_ID_WORDS, 0); if (err_mask) { if (err_mask & AC_ERR_NODEV_HINT) { DPRINTK("ata%u.%d: NODEV after polling detection\n", @@ -1722,7 +1803,8 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class, tf.feature = SETFEATURES_SPINUP; tf.protocol = ATA_PROT_NODATA; tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; - err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0); + err_mask = ata_exec_internal(dev, &tf, NULL, + DMA_NONE, NULL, 0, 0); if (err_mask && id[2] != 0x738c) { rc = -EIO; reason = "SPINUP failed"; @@ -1740,10 +1822,13 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class, /* * The exact sequence expected by certain pre-ATA4 drives is: * SRST RESET - * IDENTIFY - * INITIALIZE DEVICE PARAMETERS + * IDENTIFY (optional in early ATA) + * INITIALIZE DEVICE PARAMETERS (later IDE and ATA) * anything else.. * Some drives were very specific about that exact sequence. + * + * Note that ATA4 says lba is mandatory so the second check + * shoud never trigger. */ if (ata_id_major_version(id) < 4 || !ata_id_has_lba(id)) { err_mask = ata_dev_init_params(dev, id[3], id[6]); @@ -1774,13 +1859,14 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class, static inline u8 ata_dev_knobble(struct ata_device *dev) { - return ((dev->ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(dev->id))); + struct ata_port *ap = dev->link->ap; + return ((ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(dev->id))); } static void ata_dev_config_ncq(struct ata_device *dev, char *desc, size_t desc_sz) { - struct ata_port *ap = dev->ap; + struct ata_port *ap = dev->link->ap; int hdepth = 0, ddepth = ata_id_queue_depth(dev->id); if (!ata_id_has_ncq(dev->id)) { @@ -1817,8 +1903,8 @@ static void ata_dev_config_ncq(struct ata_device *dev, */ int ata_dev_configure(struct ata_device *dev) { - struct ata_port *ap = dev->ap; - struct ata_eh_context *ehc = &ap->eh_context; + struct ata_port *ap = dev->link->ap; + struct ata_eh_context *ehc = &dev->link->eh_context; int print_info = ehc->i.flags & ATA_EHI_PRINTINFO; const u16 *id = dev->id; unsigned int xfer_mask; @@ -1844,6 +1930,11 @@ int ata_dev_configure(struct ata_device *dev) if (rc) return rc; + /* massage HPA, do it early as it might change IDENTIFY data */ + rc = ata_hpa_resize(dev); + if (rc) + return rc; + /* print device capabilities */ if (ata_msg_probe(ap)) ata_dev_printk(dev, KERN_DEBUG, @@ -1911,10 +2002,6 @@ int ata_dev_configure(struct ata_device *dev) dev->flags |= ATA_DFLAG_FLUSH_EXT; } - if (!(dev->horkage & ATA_HORKAGE_BROKEN_HPA) && - ata_id_hpa_enabled(dev->id)) - dev->n_sectors = ata_hpa_resize(dev); - /* config NCQ */ ata_dev_config_ncq(dev, ncq_desc, sizeof(ncq_desc)); @@ -1963,7 +2050,9 @@ int ata_dev_configure(struct ata_device *dev) /* ATAPI-specific feature tests */ else if (dev->class == ATA_DEV_ATAPI) { - char *cdb_intr_string = ""; + const char *cdb_intr_string = ""; + const char *atapi_an_string = ""; + u32 sntf; rc = atapi_cdb_len(id); if ((rc < 12) || (rc > ATAPI_CDB_LEN)) { @@ -1975,6 +2064,28 @@ int ata_dev_configure(struct ata_device *dev) } dev->cdb_len = (unsigned int) rc; + /* Enable ATAPI AN if both the host and device have + * the support. If PMP is attached, SNTF is required + * to enable ATAPI AN to discern between PHY status + * changed notifications and ATAPI ANs. + */ + if ((ap->flags & ATA_FLAG_AN) && ata_id_has_atapi_AN(id) && + (!ap->nr_pmp_links || + sata_scr_read(&ap->link, SCR_NOTIFICATION, &sntf) == 0)) { + unsigned int err_mask; + + /* issue SET feature command to turn this on */ + err_mask = ata_dev_set_AN(dev, SETFEATURES_SATA_ENABLE); + if (err_mask) + ata_dev_printk(dev, KERN_ERR, + "failed to enable ATAPI AN " + "(err_mask=0x%x)\n", err_mask); + else { + dev->flags |= ATA_DFLAG_AN; + atapi_an_string = ", ATAPI AN"; + } + } + if (ata_id_cdb_intr(dev->id)) { dev->flags |= ATA_DFLAG_CDB_INTR; cdb_intr_string = ", CDB intr"; @@ -1983,10 +2094,10 @@ int ata_dev_configure(struct ata_device *dev) /* print device info to dmesg */ if (ata_msg_drv(ap) && print_info) ata_dev_printk(dev, KERN_INFO, - "ATAPI: %s, %s, max %s%s\n", + "ATAPI: %s, %s, max %s%s%s\n", modelbuf, fwrevbuf, ata_mode_string(xfer_mask), - cdb_intr_string); + cdb_intr_string, atapi_an_string); } /* determine max_sectors */ @@ -2103,21 +2214,19 @@ int ata_bus_probe(struct ata_port *ap) { unsigned int classes[ATA_MAX_DEVICES]; int tries[ATA_MAX_DEVICES]; - int i, rc; + int rc; struct ata_device *dev; ata_port_probe(ap); - for (i = 0; i < ATA_MAX_DEVICES; i++) - tries[i] = ATA_PROBE_MAX_TRIES; + ata_link_for_each_dev(dev, &ap->link) + tries[dev->devno] = ATA_PROBE_MAX_TRIES; retry: /* reset and determine device classes */ ap->ops->phy_reset(ap); - for (i = 0; i < ATA_MAX_DEVICES; i++) { - dev = &ap->device[i]; - + ata_link_for_each_dev(dev, &ap->link) { if (!(ap->flags & ATA_FLAG_DISABLED) && dev->class != ATA_DEV_UNKNOWN) classes[dev->devno] = dev->class; @@ -2132,18 +2241,16 @@ int ata_bus_probe(struct ata_port *ap) /* after the reset the device state is PIO 0 and the controller state is undefined. Record the mode */ - for (i = 0; i < ATA_MAX_DEVICES; i++) - ap->device[i].pio_mode = XFER_PIO_0; + ata_link_for_each_dev(dev, &ap->link) + dev->pio_mode = XFER_PIO_0; /* read IDENTIFY page and configure devices. We have to do the identify specific sequence bass-ackwards so that PDIAG- is released by the slave device */ - for (i = ATA_MAX_DEVICES - 1; i >= 0; i--) { - dev = &ap->device[i]; - - if (tries[i]) - dev->class = classes[i]; + ata_link_for_each_dev(dev, &ap->link) { + if (tries[dev->devno]) + dev->class = classes[dev->devno]; if (!ata_dev_enabled(dev)) continue; @@ -2158,33 +2265,42 @@ int ata_bus_probe(struct ata_port *ap) if (ap->ops->cable_detect) ap->cbl = ap->ops->cable_detect(ap); + /* We may have SATA bridge glue hiding here irrespective of the + reported cable types and sensed types */ + ata_link_for_each_dev(dev, &ap->link) { + if (!ata_dev_enabled(dev)) + continue; + /* SATA drives indicate we have a bridge. We don't know which + end of the link the bridge is which is a problem */ + if (ata_id_is_sata(dev->id)) + ap->cbl = ATA_CBL_SATA; + } + /* After the identify sequence we can now set up the devices. We do this in the normal order so that the user doesn't get confused */ - for(i = 0; i < ATA_MAX_DEVICES; i++) { - dev = &ap->device[i]; + ata_link_for_each_dev(dev, &ap->link) { if (!ata_dev_enabled(dev)) continue; - ap->eh_context.i.flags |= ATA_EHI_PRINTINFO; + ap->link.eh_context.i.flags |= ATA_EHI_PRINTINFO; rc = ata_dev_configure(dev); - ap->eh_context.i.flags &= ~ATA_EHI_PRINTINFO; + ap->link.eh_context.i.flags &= ~ATA_EHI_PRINTINFO; if (rc) goto fail; } /* configure transfer mode */ - rc = ata_set_mode(ap, &dev); + rc = ata_set_mode(&ap->link, &dev); if (rc) goto fail; - for (i = 0; i < ATA_MAX_DEVICES; i++) - if (ata_dev_enabled(&ap->device[i])) + ata_link_for_each_dev(dev, &ap->link) + if (ata_dev_enabled(dev)) return 0; /* no device present, disable port */ ata_port_disable(ap); - ap->ops->port_disable(ap); return -ENODEV; fail: @@ -2204,7 +2320,7 @@ int ata_bus_probe(struct ata_port *ap) /* This is the last chance, better to slow * down than lose it. */ - sata_down_spd_limit(ap); + sata_down_spd_limit(&ap->link); ata_down_xfermask_limit(dev, ATA_DNXFER_PIO); } } @@ -2233,28 +2349,28 @@ void ata_port_probe(struct ata_port *ap) /** * sata_print_link_status - Print SATA link status - * @ap: SATA port to printk link status about + * @link: SATA link to printk link status about * * This function prints link speed and status of a SATA link. * * LOCKING: * None. */ -void sata_print_link_status(struct ata_port *ap) +void sata_print_link_status(struct ata_link *link) { u32 sstatus, scontrol, tmp; - if (sata_scr_read(ap, SCR_STATUS, &sstatus)) + if (sata_scr_read(link, SCR_STATUS, &sstatus)) return; - sata_scr_read(ap, SCR_CONTROL, &scontrol); + sata_scr_read(link, SCR_CONTROL, &scontrol); - if (ata_port_online(ap)) { + if (ata_link_online(link)) { tmp = (sstatus >> 4) & 0xf; - ata_port_printk(ap, KERN_INFO, + ata_link_printk(link, KERN_INFO, "SATA link up %s (SStatus %X SControl %X)\n", sata_spd_string(tmp), sstatus, scontrol); } else { - ata_port_printk(ap, KERN_INFO, + ata_link_printk(link, KERN_INFO, "SATA link down (SStatus %X SControl %X)\n", sstatus, scontrol); } @@ -2274,32 +2390,33 @@ void sata_print_link_status(struct ata_port *ap) */ void __sata_phy_reset(struct ata_port *ap) { - u32 sstatus; + struct ata_link *link = &ap->link; unsigned long timeout = jiffies + (HZ * 5); + u32 sstatus; if (ap->flags & ATA_FLAG_SATA_RESET) { /* issue phy wake/reset */ - sata_scr_write_flush(ap, SCR_CONTROL, 0x301); + sata_scr_write_flush(link, SCR_CONTROL, 0x301); /* Couldn't find anything in SATA I/II specs, but * AHCI-1.1 10.4.2 says at least 1 ms. */ mdelay(1); } /* phy wake/clear reset */ - sata_scr_write_flush(ap, SCR_CONTROL, 0x300); + sata_scr_write_flush(link, SCR_CONTROL, 0x300); /* wait for phy to become ready, if necessary */ do { msleep(200); - sata_scr_read(ap, SCR_STATUS, &sstatus); + sata_scr_read(link, SCR_STATUS, &sstatus); if ((sstatus & 0xf) != 1) break; } while (time_before(jiffies, timeout)); /* print link status */ - sata_print_link_status(ap); + sata_print_link_status(link); /* TODO: phy layer with polling, timeouts, etc. */ - if (!ata_port_offline(ap)) + if (!ata_link_offline(link)) ata_port_probe(ap); else ata_port_disable(ap); @@ -2344,8 +2461,8 @@ void sata_phy_reset(struct ata_port *ap) struct ata_device *ata_dev_pair(struct ata_device *adev) { - struct ata_port *ap = adev->ap; - struct ata_device *pair = &ap->device[1 - adev->devno]; + struct ata_link *link = adev->link; + struct ata_device *pair = &link->device[1 - adev->devno]; if (!ata_dev_enabled(pair)) return NULL; return pair; @@ -2366,16 +2483,16 @@ struct ata_device *ata_dev_pair(struct ata_device *adev) void ata_port_disable(struct ata_port *ap) { - ap->device[0].class = ATA_DEV_NONE; - ap->device[1].class = ATA_DEV_NONE; + ap->link.device[0].class = ATA_DEV_NONE; + ap->link.device[1].class = ATA_DEV_NONE; ap->flags |= ATA_FLAG_DISABLED; } /** * sata_down_spd_limit - adjust SATA spd limit downward - * @ap: Port to adjust SATA spd limit for + * @link: Link to adjust SATA spd limit for * - * Adjust SATA spd limit of @ap downward. Note that this + * Adjust SATA spd limit of @link downward. Note that this * function only adjusts the limit. The change must be applied * using sata_set_spd(). * @@ -2385,24 +2502,24 @@ void ata_port_disable(struct ata_port *ap) * RETURNS: * 0 on success, negative errno on failure */ -int sata_down_spd_limit(struct ata_port *ap) +int sata_down_spd_limit(struct ata_link *link) { u32 sstatus, spd, mask; int rc, highbit; - if (!sata_scr_valid(ap)) + if (!sata_scr_valid(link)) return -EOPNOTSUPP; /* If SCR can be read, use it to determine the current SPD. - * If not, use cached value in ap->sata_spd. + * If not, use cached value in link->sata_spd. */ - rc = sata_scr_read(ap, SCR_STATUS, &sstatus); + rc = sata_scr_read(link, SCR_STATUS, &sstatus); if (rc == 0) spd = (sstatus >> 4) & 0xf; else - spd = ap->sata_spd; + spd = link->sata_spd; - mask = ap->sata_spd_limit; + mask = link->sata_spd_limit; if (mask <= 1) return -EINVAL; @@ -2422,22 +2539,22 @@ int sata_down_spd_limit(struct ata_port *ap) if (!mask) return -EINVAL; - ap->sata_spd_limit = mask; + link->sata_spd_limit = mask; - ata_port_printk(ap, KERN_WARNING, "limiting SATA link speed to %s\n", + ata_link_printk(link, KERN_WARNING, "limiting SATA link speed to %s\n", sata_spd_string(fls(mask))); return 0; } -static int __sata_set_spd_needed(struct ata_port *ap, u32 *scontrol) +static int __sata_set_spd_needed(struct ata_link *link, u32 *scontrol) { u32 spd, limit; - if (ap->sata_spd_limit == UINT_MAX) + if (link->sata_spd_limit == UINT_MAX) limit = 0; else - limit = fls(ap->sata_spd_limit); + limit = fls(link->sata_spd_limit); spd = (*scontrol >> 4) & 0xf; *scontrol = (*scontrol & ~0xf0) | ((limit & 0xf) << 4); @@ -2447,10 +2564,10 @@ static int __sata_set_spd_needed(struct ata_port *ap, u32 *scontrol) /** * sata_set_spd_needed - is SATA spd configuration needed - * @ap: Port in question + * @link: Link in question * * Test whether the spd limit in SControl matches - * @ap->sata_spd_limit. This function is used to determine + * @link->sata_spd_limit. This function is used to determine * whether hardreset is necessary to apply SATA spd * configuration. * @@ -2460,21 +2577,21 @@ static int __sata_set_spd_needed(struct ata_port *ap, u32 *scontrol) * RETURNS: * 1 if SATA spd configuration is needed, 0 otherwise. */ -int sata_set_spd_needed(struct ata_port *ap) +int sata_set_spd_needed(struct ata_link *link) { u32 scontrol; - if (sata_scr_read(ap, SCR_CONTROL, &scontrol)) + if (sata_scr_read(link, SCR_CONTROL, &scontrol)) return 0; - return __sata_set_spd_needed(ap, &scontrol); + return __sata_set_spd_needed(link, &scontrol); } /** * sata_set_spd - set SATA spd according to spd limit - * @ap: Port to set SATA spd for + * @link: Link to set SATA spd for * - * Set SATA spd of @ap according to sata_spd_limit. + * Set SATA spd of @link according to sata_spd_limit. * * LOCKING: * Inherited from caller. @@ -2483,18 +2600,18 @@ int sata_set_spd_needed(struct ata_port *ap) * 0 if spd doesn't need to be changed, 1 if spd has been * changed. Negative errno if SCR registers are inaccessible. */ -int sata_set_spd(struct ata_port *ap) +int sata_set_spd(struct ata_link *link) { u32 scontrol; int rc; - if ((rc = sata_scr_read(ap, SCR_CONTROL, &scontrol))) + if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol))) return rc; - if (!__sata_set_spd_needed(ap, &scontrol)) + if (!__sata_set_spd_needed(link, &scontrol)) return 0; - if ((rc = sata_scr_write(ap, SCR_CONTROL, scontrol))) + if ((rc = sata_scr_write(link, SCR_CONTROL, scontrol))) return rc; return 1; @@ -2749,7 +2866,7 @@ int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel) static int ata_dev_set_mode(struct ata_device *dev) { - struct ata_eh_context *ehc = &dev->ap->eh_context; + struct ata_eh_context *ehc = &dev->link->eh_context; unsigned int err_mask; int rc; @@ -2761,7 +2878,11 @@ static int ata_dev_set_mode(struct ata_device *dev) /* Old CFA may refuse this command, which is just fine */ if (dev->xfer_shift == ATA_SHIFT_PIO && ata_id_is_cfa(dev->id)) err_mask &= ~AC_ERR_DEV; - + /* Some very old devices and some bad newer ones fail any kind of + SET_XFERMODE request but support PIO0-2 timings and no IORDY */ + if (dev->xfer_shift == ATA_SHIFT_PIO && !ata_id_has_iordy(dev->id) && + dev->pio_mode <= XFER_PIO_2) + err_mask &= ~AC_ERR_DEV; if (err_mask) { ata_dev_printk(dev, KERN_ERR, "failed to set xfermode " "(err_mask=0x%x)\n", err_mask); @@ -2769,7 +2890,7 @@ static int ata_dev_set_mode(struct ata_device *dev) } ehc->i.flags |= ATA_EHI_POST_SETMODE; - rc = ata_dev_revalidate(dev, 0); + rc = ata_dev_revalidate(dev, ATA_DEV_UNKNOWN, 0); ehc->i.flags &= ~ATA_EHI_POST_SETMODE; if (rc) return rc; @@ -2784,7 +2905,7 @@ static int ata_dev_set_mode(struct ata_device *dev) /** * ata_do_set_mode - Program timings and issue SET FEATURES - XFER - * @ap: port on which timings will be programmed + * @link: link on which timings will be programmed * @r_failed_dev: out paramter for failed device * * Standard implementation of the function used to tune and set @@ -2799,25 +2920,36 @@ static int ata_dev_set_mode(struct ata_device *dev) * 0 on success, negative errno otherwise */ -int ata_do_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev) +int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev) { + struct ata_port *ap = link->ap; struct ata_device *dev; - int i, rc = 0, used_dma = 0, found = 0; - + int rc = 0, used_dma = 0, found = 0; /* step 1: calculate xfer_mask */ - for (i = 0; i < ATA_MAX_DEVICES; i++) { + ata_link_for_each_dev(dev, link) { unsigned int pio_mask, dma_mask; - - dev = &ap->device[i]; + unsigned int mode_mask; if (!ata_dev_enabled(dev)) continue; + mode_mask = ATA_DMA_MASK_ATA; + if (dev->class == ATA_DEV_ATAPI) + mode_mask = ATA_DMA_MASK_ATAPI; + else if (ata_id_is_cfa(dev->id)) + mode_mask = ATA_DMA_MASK_CFA; + ata_dev_xfermask(dev); pio_mask = ata_pack_xfermask(dev->pio_mask, 0, 0); dma_mask = ata_pack_xfermask(0, dev->mwdma_mask, dev->udma_mask); + + if (libata_dma_mask & mode_mask) + dma_mask = ata_pack_xfermask(0, dev->mwdma_mask, dev->udma_mask); + else + dma_mask = 0; + dev->pio_mode = ata_xfer_mask2mode(pio_mask); dev->dma_mode = ata_xfer_mask2mode(dma_mask); @@ -2829,8 +2961,7 @@ int ata_do_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev) goto out; /* step 2: always set host PIO timings */ - for (i = 0; i < ATA_MAX_DEVICES; i++) { - dev = &ap->device[i]; + ata_link_for_each_dev(dev, link) { if (!ata_dev_enabled(dev)) continue; @@ -2847,9 +2978,7 @@ int ata_do_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev) } /* step 3: set host DMA timings */ - for (i = 0; i < ATA_MAX_DEVICES; i++) { - dev = &ap->device[i]; - + ata_link_for_each_dev(dev, link) { if (!ata_dev_enabled(dev) || !dev->dma_mode) continue; @@ -2860,9 +2989,7 @@ int ata_do_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev) } /* step 4: update devices' xfer mode */ - for (i = 0; i < ATA_MAX_DEVICES; i++) { - dev = &ap->device[i]; - + ata_link_for_each_dev(dev, link) { /* don't update suspended devices' xfer mode */ if (!ata_dev_enabled(dev)) continue; @@ -2886,7 +3013,7 @@ int ata_do_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev) /** * ata_set_mode - Program timings and issue SET FEATURES - XFER - * @ap: port on which timings will be programmed + * @link: link on which timings will be programmed * @r_failed_dev: out paramter for failed device * * Set ATA device disk transfer mode (PIO3, UDMA6, etc.). If @@ -2899,12 +3026,14 @@ int ata_do_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev) * RETURNS: * 0 on success, negative errno otherwise */ -int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev) +int ata_set_mode(struct ata_link *link, struct ata_device **r_failed_dev) { + struct ata_port *ap = link->ap; + /* has private set_mode? */ if (ap->ops->set_mode) - return ap->ops->set_mode(ap, r_failed_dev); - return ata_do_set_mode(ap, r_failed_dev); + return ap->ops->set_mode(link, r_failed_dev); + return ata_do_set_mode(link, r_failed_dev); } /** @@ -3007,7 +3136,7 @@ int ata_wait_ready(struct ata_port *ap, unsigned long deadline) if (!(status & ATA_BUSY)) return 0; - if (!ata_port_online(ap) && status == 0xff) + if (!ata_link_online(&ap->link) && status == 0xff) return -ENODEV; if (time_after(now, deadline)) return -EBUSY; @@ -3088,6 +3217,8 @@ static int ata_bus_softreset(struct ata_port *ap, unsigned int devmask, unsigned long deadline) { struct ata_ioports *ioaddr = &ap->ioaddr; + struct ata_device *dev; + int i = 0; DPRINTK("ata%u: bus reset via SRST\n", ap->print_id); @@ -3098,6 +3229,25 @@ static int ata_bus_softreset(struct ata_port *ap, unsigned int devmask, udelay(20); /* FIXME: flush */ iowrite8(ap->ctl, ioaddr->ctl_addr); + /* If we issued an SRST then an ATA drive (not ATAPI) + * may have changed configuration and be in PIO0 timing. If + * we did a hard reset (or are coming from power on) this is + * true for ATA or ATAPI. Until we've set a suitable controller + * mode we should not touch the bus as we may be talking too fast. + */ + + ata_link_for_each_dev(dev, &ap->link) + dev->pio_mode = XFER_PIO_0; + + /* If the controller has a pio mode setup function then use + it to set the chipset to rights. Don't touch the DMA setup + as that will be dealt with when revalidating */ + if (ap->ops->set_piomode) { + ata_link_for_each_dev(dev, &ap->link) + if (devmask & (1 << i++)) + ap->ops->set_piomode(ap, dev); + } + /* spec mandates ">= 2ms" before checking status. * We wait 150ms, because that was the magic delay used for * ATAPI devices in Hale Landis's ATADRVR, for the period of time @@ -3142,6 +3292,7 @@ static int ata_bus_softreset(struct ata_port *ap, unsigned int devmask, void ata_bus_reset(struct ata_port *ap) { + struct ata_device *device = ap->link.device; struct ata_ioports *ioaddr = &ap->ioaddr; unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS; u8 err; @@ -3177,19 +3328,19 @@ void ata_bus_reset(struct ata_port *ap) /* * determine by signature whether we have ATA or ATAPI devices */ - ap->device[0].class = ata_dev_try_classify(ap, 0, &err); + device[0].class = ata_dev_try_classify(&device[0], dev0, &err); if ((slave_possible) && (err != 0x81)) - ap->device[1].class = ata_dev_try_classify(ap, 1, &err); + device[1].class = ata_dev_try_classify(&device[1], dev1, &err); /* is double-select really necessary? */ - if (ap->device[1].class != ATA_DEV_NONE) + if (device[1].class != ATA_DEV_NONE) ap->ops->dev_select(ap, 1); - if (ap->device[0].class != ATA_DEV_NONE) + if (device[0].class != ATA_DEV_NONE) ap->ops->dev_select(ap, 0); /* if no devices were detected, disable this port */ - if ((ap->device[0].class == ATA_DEV_NONE) && - (ap->device[1].class == ATA_DEV_NONE)) + if ((device[0].class == ATA_DEV_NONE) && + (device[1].class == ATA_DEV_NONE)) goto err_out; if (ap->flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST)) { @@ -3202,18 +3353,18 @@ void ata_bus_reset(struct ata_port *ap) err_out: ata_port_printk(ap, KERN_ERR, "disabling port\n"); - ap->ops->port_disable(ap); + ata_port_disable(ap); DPRINTK("EXIT\n"); } /** - * sata_phy_debounce - debounce SATA phy status - * @ap: ATA port to debounce SATA phy status for + * sata_link_debounce - debounce SATA phy status + * @link: ATA link to debounce SATA phy status for * @params: timing parameters { interval, duratinon, timeout } in msec * @deadline: deadline jiffies for the operation * - * Make sure SStatus of @ap reaches stable state, determined by +* Make sure SStatus of @link reaches stable state, determined by * holding the same value where DET is not 1 for @duration polled * every @interval, before @timeout. Timeout constraints the * beginning of the stable state. Because DET gets stuck at 1 on @@ -3229,8 +3380,8 @@ err_out: * RETURNS: * 0 on success, -errno on failure. */ -int sata_phy_debounce(struct ata_port *ap, const unsigned long *params, - unsigned long deadline) +int sata_link_debounce(struct ata_link *link, const unsigned long *params, + unsigned long deadline) { unsigned long interval_msec = params[0]; unsigned long duration = msecs_to_jiffies(params[1]); @@ -3242,7 +3393,7 @@ int sata_phy_debounce(struct ata_port *ap, const unsigned long *params, if (time_before(t, deadline)) deadline = t; - if ((rc = sata_scr_read(ap, SCR_STATUS, &cur))) + if ((rc = sata_scr_read(link, SCR_STATUS, &cur))) return rc; cur &= 0xf; @@ -3251,7 +3402,7 @@ int sata_phy_debounce(struct ata_port *ap, const unsigned long *params, while (1) { msleep(interval_msec); - if ((rc = sata_scr_read(ap, SCR_STATUS, &cur))) + if ((rc = sata_scr_read(link, SCR_STATUS, &cur))) return rc; cur &= 0xf; @@ -3277,12 +3428,12 @@ int sata_phy_debounce(struct ata_port *ap, const unsigned long *params, } /** - * sata_phy_resume - resume SATA phy - * @ap: ATA port to resume SATA phy for + * sata_link_resume - resume SATA link + * @link: ATA link to resume SATA * @params: timing parameters { interval, duratinon, timeout } in msec * @deadline: deadline jiffies for the operation * - * Resume SATA phy of @ap and debounce it. + * Resume SATA phy @link and debounce it. * * LOCKING: * Kernel thread context (may sleep) @@ -3290,18 +3441,18 @@ int sata_phy_debounce(struct ata_port *ap, const unsigned long *params, * RETURNS: * 0 on success, -errno on failure. */ -int sata_phy_resume(struct ata_port *ap, const unsigned long *params, - unsigned long deadline) +int sata_link_resume(struct ata_link *link, const unsigned long *params, + unsigned long deadline) { u32 scontrol; int rc; - if ((rc = sata_scr_read(ap, SCR_CONTROL, &scontrol))) + if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol))) return rc; scontrol = (scontrol & 0x0f0) | 0x300; - if ((rc = sata_scr_write(ap, SCR_CONTROL, scontrol))) + if ((rc = sata_scr_write(link, SCR_CONTROL, scontrol))) return rc; /* Some PHYs react badly if SStatus is pounded immediately @@ -3309,15 +3460,15 @@ int sata_phy_resume(struct ata_port *ap, const unsigned long *params, */ msleep(200); - return sata_phy_debounce(ap, params, deadline); + return sata_link_debounce(link, params, deadline); } /** * ata_std_prereset - prepare for reset - * @ap: ATA port to be reset + * @link: ATA link to be reset * @deadline: deadline jiffies for the operation * - * @ap is about to be reset. Initialize it. Failure from + * @link is about to be reset. Initialize it. Failure from * prereset makes libata abort whole reset sequence and give up * that port, so prereset should be best-effort. It does its * best to prepare for reset sequence but if things go wrong, it @@ -3329,37 +3480,44 @@ int sata_phy_resume(struct ata_port *ap, const unsigned long *params, * RETURNS: * 0 on success, -errno otherwise. */ -int ata_std_prereset(struct ata_port *ap, unsigned long deadline) +int ata_std_prereset(struct ata_link *link, unsigned long deadline) { - struct ata_eh_context *ehc = &ap->eh_context; + struct ata_port *ap = link->ap; + struct ata_eh_context *ehc = &link->eh_context; const unsigned long *timing = sata_ehc_deb_timing(ehc); int rc; /* handle link resume */ if ((ehc->i.flags & ATA_EHI_RESUME_LINK) && - (ap->flags & ATA_FLAG_HRST_TO_RESUME)) + (link->flags & ATA_LFLAG_HRST_TO_RESUME)) + ehc->i.action |= ATA_EH_HARDRESET; + + /* Some PMPs don't work with only SRST, force hardreset if PMP + * is supported. + */ + if (ap->flags & ATA_FLAG_PMP) ehc->i.action |= ATA_EH_HARDRESET; /* if we're about to do hardreset, nothing more to do */ if (ehc->i.action & ATA_EH_HARDRESET) return 0; - /* if SATA, resume phy */ + /* if SATA, resume link */ if (ap->flags & ATA_FLAG_SATA) { - rc = sata_phy_resume(ap, timing, deadline); + rc = sata_link_resume(link, timing, deadline); /* whine about phy resume failure but proceed */ if (rc && rc != -EOPNOTSUPP) - ata_port_printk(ap, KERN_WARNING, "failed to resume " + ata_link_printk(link, KERN_WARNING, "failed to resume " "link for reset (errno=%d)\n", rc); } /* Wait for !BSY if the controller can wait for the first D2H * Reg FIS and we don't know that no device is attached. */ - if (!(ap->flags & ATA_FLAG_SKIP_D2H_BSY) && !ata_port_offline(ap)) { + if (!(link->flags & ATA_LFLAG_SKIP_D2H_BSY) && !ata_link_offline(link)) { rc = ata_wait_ready(ap, deadline); if (rc && rc != -ENODEV) { - ata_port_printk(ap, KERN_WARNING, "device not ready " + ata_link_printk(link, KERN_WARNING, "device not ready " "(errno=%d), forcing hardreset\n", rc); ehc->i.action |= ATA_EH_HARDRESET; } @@ -3370,7 +3528,7 @@ int ata_std_prereset(struct ata_port *ap, unsigned long deadline) /** * ata_std_softreset - reset host port via ATA SRST - * @ap: port to reset + * @link: ATA link to reset * @classes: resulting classes of attached devices * @deadline: deadline jiffies for the operation * @@ -3382,9 +3540,10 @@ int ata_std_prereset(struct ata_port *ap, unsigned long deadline) * RETURNS: * 0 on success, -errno otherwise. */ -int ata_std_softreset(struct ata_port *ap, unsigned int *classes, +int ata_std_softreset(struct ata_link *link, unsigned int *classes, unsigned long deadline) { + struct ata_port *ap = link->ap; unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS; unsigned int devmask = 0; int rc; @@ -3392,7 +3551,7 @@ int ata_std_softreset(struct ata_port *ap, unsigned int *classes, DPRINTK("ENTER\n"); - if (ata_port_offline(ap)) { + if (ata_link_offline(link)) { classes[0] = ATA_DEV_NONE; goto out; } @@ -3410,15 +3569,17 @@ int ata_std_softreset(struct ata_port *ap, unsigned int *classes, DPRINTK("about to softreset, devmask=%x\n", devmask); rc = ata_bus_softreset(ap, devmask, deadline); /* if link is occupied, -ENODEV too is an error */ - if (rc && (rc != -ENODEV || sata_scr_valid(ap))) { - ata_port_printk(ap, KERN_ERR, "SRST failed (errno=%d)\n", rc); + if (rc && (rc != -ENODEV || sata_scr_valid(link))) { + ata_link_printk(link, KERN_ERR, "SRST failed (errno=%d)\n", rc); return rc; } /* determine by signature whether we have ATA or ATAPI devices */ - classes[0] = ata_dev_try_classify(ap, 0, &err); + classes[0] = ata_dev_try_classify(&link->device[0], + devmask & (1 << 0), &err); if (slave_possible && err != 0x81) - classes[1] = ata_dev_try_classify(ap, 1, &err); + classes[1] = ata_dev_try_classify(&link->device[1], + devmask & (1 << 1), &err); out: DPRINTK("EXIT, classes[0]=%u [1]=%u\n", classes[0], classes[1]); @@ -3426,12 +3587,12 @@ int ata_std_softreset(struct ata_port *ap, unsigned int *classes, } /** - * sata_port_hardreset - reset port via SATA phy reset - * @ap: port to reset + * sata_link_hardreset - reset link via SATA phy reset + * @link: link to reset * @timing: timing parameters { interval, duratinon, timeout } in msec * @deadline: deadline jiffies for the operation * - * SATA phy-reset host port using DET bits of SControl register. + * SATA phy-reset @link using DET bits of SControl register. * * LOCKING: * Kernel thread context (may sleep) @@ -3439,7 +3600,7 @@ int ata_std_softreset(struct ata_port *ap, unsigned int *classes, * RETURNS: * 0 on success, -errno otherwise. */ -int sata_port_hardreset(struct ata_port *ap, const unsigned long *timing, +int sata_link_hardreset(struct ata_link *link, const unsigned long *timing, unsigned long deadline) { u32 scontrol; @@ -3447,30 +3608,30 @@ int sata_port_hardreset(struct ata_port *ap, const unsigned long *timing, DPRINTK("ENTER\n"); - if (sata_set_spd_needed(ap)) { + if (sata_set_spd_needed(link)) { /* SATA spec says nothing about how to reconfigure * spd. To be on the safe side, turn off phy during * reconfiguration. This works for at least ICH7 AHCI * and Sil3124. */ - if ((rc = sata_scr_read(ap, SCR_CONTROL, &scontrol))) + if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol))) goto out; scontrol = (scontrol & 0x0f0) | 0x304; - if ((rc = sata_scr_write(ap, SCR_CONTROL, scontrol))) + if ((rc = sata_scr_write(link, SCR_CONTROL, scontrol))) goto out; - sata_set_spd(ap); + sata_set_spd(link); } /* issue phy wake/reset */ - if ((rc = sata_scr_read(ap, SCR_CONTROL, &scontrol))) + if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol))) goto out; scontrol = (scontrol & 0x0f0) | 0x301; - if ((rc = sata_scr_write_flush(ap, SCR_CONTROL, scontrol))) + if ((rc = sata_scr_write_flush(link, SCR_CONTROL, scontrol))) goto out; /* Couldn't find anything in SATA I/II specs, but AHCI-1.1 @@ -3478,8 +3639,8 @@ int sata_port_hardreset(struct ata_port *ap, const unsigned long *timing, */ msleep(1); - /* bring phy back */ - rc = sata_phy_resume(ap, timing, deadline); + /* bring link back */ + rc = sata_link_resume(link, timing, deadline); out: DPRINTK("EXIT, rc=%d\n", rc); return rc; @@ -3487,7 +3648,7 @@ int sata_port_hardreset(struct ata_port *ap, const unsigned long *timing, /** * sata_std_hardreset - reset host port via SATA phy reset - * @ap: port to reset + * @link: link to reset * @class: resulting class of attached device * @deadline: deadline jiffies for the operation * @@ -3500,24 +3661,25 @@ int sata_port_hardreset(struct ata_port *ap, const unsigned long *timing, * RETURNS: * 0 on success, -errno otherwise. */ -int sata_std_hardreset(struct ata_port *ap, unsigned int *class, +int sata_std_hardreset(struct ata_link *link, unsigned int *class, unsigned long deadline) { - const unsigned long *timing = sata_ehc_deb_timing(&ap->eh_context); + struct ata_port *ap = link->ap; + const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context); int rc; DPRINTK("ENTER\n"); /* do hardreset */ - rc = sata_port_hardreset(ap, timing, deadline); + rc = sata_link_hardreset(link, timing, deadline); if (rc) { - ata_port_printk(ap, KERN_ERR, + ata_link_printk(link, KERN_ERR, "COMRESET failed (errno=%d)\n", rc); return rc; } /* TODO: phy layer with polling, timeouts, etc. */ - if (ata_port_offline(ap)) { + if (ata_link_offline(link)) { *class = ATA_DEV_NONE; DPRINTK("EXIT, link offline\n"); return 0; @@ -3526,17 +3688,27 @@ int sata_std_hardreset(struct ata_port *ap, unsigned int *class, /* wait a while before checking status, see SRST for more info */ msleep(150); + /* If PMP is supported, we have to do follow-up SRST. Note + * that some PMPs don't send D2H Reg FIS after hardreset at + * all if the first port is empty. Wait for it just for a + * second and request follow-up SRST. + */ + if (ap->flags & ATA_FLAG_PMP) { + ata_wait_ready(ap, jiffies + HZ); + return -EAGAIN; + } + rc = ata_wait_ready(ap, deadline); /* link occupied, -ENODEV too is an error */ if (rc) { - ata_port_printk(ap, KERN_ERR, + ata_link_printk(link, KERN_ERR, "COMRESET failed (errno=%d)\n", rc); return rc; } ap->ops->dev_select(ap, 0); /* probably unnecessary */ - *class = ata_dev_try_classify(ap, 0, NULL); + *class = ata_dev_try_classify(link->device, 1, NULL); DPRINTK("EXIT, class=%u\n", *class); return 0; @@ -3544,7 +3716,7 @@ int sata_std_hardreset(struct ata_port *ap, unsigned int *class, /** * ata_std_postreset - standard postreset callback - * @ap: the target ata_port + * @link: the target ata_link * @classes: classes of attached devices * * This function is invoked after a successful reset. Note that @@ -3554,18 +3726,19 @@ int sata_std_hardreset(struct ata_port *ap, unsigned int *class, * LOCKING: * Kernel thread context (may sleep) */ -void ata_std_postreset(struct ata_port *ap, unsigned int *classes) +void ata_std_postreset(struct ata_link *link, unsigned int *classes) { + struct ata_port *ap = link->ap; u32 serror; DPRINTK("ENTER\n"); /* print link status */ - sata_print_link_status(ap); + sata_print_link_status(link); /* clear SError */ - if (sata_scr_read(ap, SCR_ERROR, &serror) == 0) - sata_scr_write(ap, SCR_ERROR, serror); + if (sata_scr_read(link, SCR_ERROR, &serror) == 0) + sata_scr_write(link, SCR_ERROR, serror); /* is double-select really necessary? */ if (classes[0] != ATA_DEV_NONE) @@ -3652,7 +3825,7 @@ static int ata_dev_same_device(struct ata_device *dev, unsigned int new_class, int ata_dev_reread_id(struct ata_device *dev, unsigned int readid_flags) { unsigned int class = dev->class; - u16 *id = (void *)dev->ap->sector_buf; + u16 *id = (void *)dev->link->ap->sector_buf; int rc; /* read ID data */ @@ -3671,6 +3844,7 @@ int ata_dev_reread_id(struct ata_device *dev, unsigned int readid_flags) /** * ata_dev_revalidate - Revalidate ATA device * @dev: device to revalidate + * @new_class: new class code * @readid_flags: read ID flags * * Re-read IDENTIFY page, make sure @dev is still attached to the @@ -3682,7 +3856,8 @@ int ata_dev_reread_id(struct ata_device *dev, unsigned int readid_flags) * RETURNS: * 0 on success, negative errno otherwise */ -int ata_dev_revalidate(struct ata_device *dev, unsigned int readid_flags) +int ata_dev_revalidate(struct ata_device *dev, unsigned int new_class, + unsigned int readid_flags) { u64 n_sectors = dev->n_sectors; int rc; @@ -3690,6 +3865,15 @@ int ata_dev_revalidate(struct ata_device *dev, unsigned int readid_flags) if (!ata_dev_enabled(dev)) return -ENODEV; + /* fail early if !ATA && !ATAPI to avoid issuing [P]IDENTIFY to PMP */ + if (ata_class_enabled(new_class) && + new_class != ATA_DEV_ATA && new_class != ATA_DEV_ATAPI) { + ata_dev_printk(dev, KERN_INFO, "class mismatch %u != %u\n", + dev->class, new_class); + rc = -ENODEV; + goto fail; + } + /* re-read ID */ rc = ata_dev_reread_id(dev, readid_flags); if (rc) @@ -3763,6 +3947,9 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "IOMEGA ZIP 250 ATAPI", NULL, ATA_HORKAGE_NODMA }, /* temporary fix */ { "IOMEGA ZIP 250 ATAPI Floppy", NULL, ATA_HORKAGE_NODMA }, + /* Odd clown on sil3726/4726 PMPs */ + { "Config Disk", NULL, ATA_HORKAGE_NODMA | + ATA_HORKAGE_SKIP_PM }, /* Weird ATAPI devices */ { "TORiSAN DVD-ROM DRD-N216", NULL, ATA_HORKAGE_MAX_SEC_128 }, @@ -3775,16 +3962,12 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { /* http://thread.gmane.org/gmane.linux.ide/14907 */ { "FUJITSU MHT2060BH", NULL, ATA_HORKAGE_NONCQ }, /* NCQ is broken */ - { "Maxtor 6L250S0", "BANC1G10", ATA_HORKAGE_NONCQ }, - { "Maxtor 6B200M0", "BANC1BM0", ATA_HORKAGE_NONCQ }, - { "Maxtor 6B200M0", "BANC1B10", ATA_HORKAGE_NONCQ }, - { "Maxtor 7B250S0", "BANC1B70", ATA_HORKAGE_NONCQ, }, - { "Maxtor 7B300S0", "BANC1B70", ATA_HORKAGE_NONCQ }, + { "Maxtor *", "BANC*", ATA_HORKAGE_NONCQ }, { "Maxtor 7V300F0", "VA111630", ATA_HORKAGE_NONCQ }, - { "HITACHI HDS7250SASUN500G 0621KTAWSD", "K2AOAJ0AHITACHI", - ATA_HORKAGE_NONCQ }, - /* NCQ hard hangs device under heavier load, needs hard power cycle */ - { "Maxtor 6B250S0", "BANC1B70", ATA_HORKAGE_NONCQ }, + { "HITACHI HDS7250SASUN500G*", NULL, ATA_HORKAGE_NONCQ }, + { "HITACHI HDS7225SBSUN250G*", NULL, ATA_HORKAGE_NONCQ }, + { "ST380817AS", "3.42", ATA_HORKAGE_NONCQ }, + /* Blacklist entries taken from Silicon Image 3124/3132 Windows driver .inf file - also several Linux problem reports */ { "HTS541060G9SA00", "MB3OC60D", ATA_HORKAGE_NONCQ, }, @@ -3793,11 +3976,16 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { /* Drives which do spurious command completion */ { "HTS541680J9SA00", "SB2IC7EP", ATA_HORKAGE_NONCQ, }, { "HTS541612J9SA00", "SBDIC7JP", ATA_HORKAGE_NONCQ, }, + { "HDT722516DLA380", "V43OA96A", ATA_HORKAGE_NONCQ, }, { "Hitachi HTS541616J9SA00", "SB4OC70P", ATA_HORKAGE_NONCQ, }, { "WDC WD740ADFD-00NLR1", NULL, ATA_HORKAGE_NONCQ, }, + { "WDC WD3200AAJS-00RYA0", "12.01B01", ATA_HORKAGE_NONCQ, }, { "FUJITSU MHV2080BH", "00840028", ATA_HORKAGE_NONCQ, }, + { "ST9120822AS", "3.CLF", ATA_HORKAGE_NONCQ, }, { "ST9160821AS", "3.CLF", ATA_HORKAGE_NONCQ, }, - { "ST3160812AS", "3.AD", ATA_HORKAGE_NONCQ, }, + { "ST9160821AS", "3.ALD", ATA_HORKAGE_NONCQ, }, + { "ST3160812AS", "3.ADJ", ATA_HORKAGE_NONCQ, }, + { "ST980813AS", "3.ADB", ATA_HORKAGE_NONCQ, }, { "SAMSUNG HD401LJ", "ZZ100-15", ATA_HORKAGE_NONCQ, }, /* devices which puke on READ_NATIVE_MAX */ @@ -3806,10 +3994,31 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "WDC WD2500JD-00HBB0", "WD-WMAL71490727", ATA_HORKAGE_BROKEN_HPA }, { "MAXTOR 6L080L4", "A93.0500", ATA_HORKAGE_BROKEN_HPA }, + /* Devices which report 1 sector over size HPA */ + { "ST340823A", NULL, ATA_HORKAGE_HPA_SIZE, }, + { "ST320413A", NULL, ATA_HORKAGE_HPA_SIZE, }, + /* End Marker */ { } }; +int strn_pattern_cmp(const char *patt, const char *name, int wildchar) +{ + const char *p; + int len; + + /* + * check for trailing wildcard: *\0 + */ + p = strchr(patt, wildchar); + if (p && ((*(p + 1)) == 0)) + len = p - patt; + else + len = strlen(name); + + return strncmp(patt, name, len); +} + static unsigned long ata_dev_blacklisted(const struct ata_device *dev) { unsigned char model_num[ATA_ID_PROD_LEN + 1]; @@ -3820,10 +4029,10 @@ static unsigned long ata_dev_blacklisted(const struct ata_device *dev) ata_id_c_string(dev->id, model_rev, ATA_ID_FW_REV, sizeof(model_rev)); while (ad->model_num) { - if (!strcmp(ad->model_num, model_num)) { + if (!strn_pattern_cmp(ad->model_num, model_num, '*')) { if (ad->model_rev == NULL) return ad->horkage; - if (!strcmp(ad->model_rev, model_rev)) + if (!strn_pattern_cmp(ad->model_rev, model_rev, '*')) return ad->horkage; } ad++; @@ -3837,7 +4046,7 @@ static int ata_dma_blacklisted(const struct ata_device *dev) * DMA blacklist those ATAPI devices with CDB-intr (and use PIO) * if the LLDD handles only interrupts in the HSM_ST_LAST state. */ - if ((dev->ap->flags & ATA_FLAG_PIO_POLLING) && + if ((dev->link->ap->flags & ATA_FLAG_PIO_POLLING) && (dev->flags & ATA_DFLAG_CDB_INTR)) return 1; return (dev->horkage & ATA_HORKAGE_NODMA) ? 1 : 0; @@ -3857,7 +4066,8 @@ static int ata_dma_blacklisted(const struct ata_device *dev) */ static void ata_dev_xfermask(struct ata_device *dev) { - struct ata_port *ap = dev->ap; + struct ata_link *link = dev->link; + struct ata_port *ap = link->ap; struct ata_host *host = ap->host; unsigned long xfer_mask; @@ -3955,7 +4165,43 @@ static unsigned int ata_dev_set_xfermode(struct ata_device *dev) tf.protocol = ATA_PROT_NODATA; tf.nsect = dev->xfer_mode; - err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0); + err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0); + + DPRINTK("EXIT, err_mask=%x\n", err_mask); + return err_mask; +} + +/** + * ata_dev_set_AN - Issue SET FEATURES - SATA FEATURES + * @dev: Device to which command will be sent + * @enable: Whether to enable or disable the feature + * + * Issue SET FEATURES - SATA FEATURES command to device @dev + * on port @ap with sector count set to indicate Asynchronous + * Notification feature + * + * LOCKING: + * PCI/etc. bus probe sem. + * + * RETURNS: + * 0 on success, AC_ERR_* mask otherwise. + */ +static unsigned int ata_dev_set_AN(struct ata_device *dev, u8 enable) +{ + struct ata_taskfile tf; + unsigned int err_mask; + + /* set up set-features taskfile */ + DPRINTK("set features - SATA features\n"); + + ata_tf_init(dev, &tf); + tf.command = ATA_CMD_SET_FEATURES; + tf.feature = enable; + tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + tf.protocol = ATA_PROT_NODATA; + tf.nsect = SATA_AN; + + err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0); DPRINTK("EXIT, err_mask=%x\n", err_mask); return err_mask; @@ -3993,7 +4239,7 @@ static unsigned int ata_dev_init_params(struct ata_device *dev, tf.nsect = sectors; tf.device |= (heads - 1) & 0x0f; /* max head = num. of heads - 1 */ - err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0); + err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0); /* A clean abort indicates an original or just out of spec drive and we should continue as we issue the setup based on the drive reported working geometry */ @@ -4207,6 +4453,36 @@ int ata_check_atapi_dma(struct ata_queued_cmd *qc) } /** + * ata_std_qc_defer - Check whether a qc needs to be deferred + * @qc: ATA command in question + * + * Non-NCQ commands cannot run with any other command, NCQ or + * not. As upper layer only knows the queue depth, we are + * responsible for maintaining exclusion. This function checks + * whether a new command @qc can be issued. + * + * LOCKING: + * spin_lock_irqsave(host lock) + * + * RETURNS: + * ATA_DEFER_* if deferring is needed, 0 otherwise. + */ +int ata_std_qc_defer(struct ata_queued_cmd *qc) +{ + struct ata_link *link = qc->dev->link; + + if (qc->tf.protocol == ATA_PROT_NCQ) { + if (!ata_tag_valid(link->active_tag)) + return 0; + } else { + if (!ata_tag_valid(link->active_tag) && !link->sactive) + return 0; + } + + return ATA_DEFER_LINK; +} + +/** * ata_qc_prep - Prepare taskfile for submission * @qc: Metadata associated with taskfile to be prepared * @@ -4482,7 +4758,7 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words) void ata_data_xfer(struct ata_device *adev, unsigned char *buf, unsigned int buflen, int write_data) { - struct ata_port *ap = adev->ap; + struct ata_port *ap = adev->link->ap; unsigned int words = buflen >> 1; /* Transfer multiple of 2 bytes */ @@ -4611,6 +4887,8 @@ static void ata_pio_sectors(struct ata_queued_cmd *qc) ata_pio_sector(qc); } else ata_pio_sector(qc); + + ata_altstatus(qc->ap); /* flush */ } /** @@ -4785,6 +5063,7 @@ static void atapi_pio_bytes(struct ata_queued_cmd *qc) VPRINTK("ata%u: xfering %d bytes\n", ap->print_id, bytes); __atapi_pio_bytes(qc, bytes); + ata_altstatus(ap); /* flush */ return; @@ -4956,7 +5235,6 @@ fsm_start: */ ap->hsm_task_state = HSM_ST; ata_pio_sectors(qc); - ata_altstatus(ap); /* flush */ } else /* send CDB */ atapi_send_cdb(ap, qc); @@ -5037,7 +5315,6 @@ fsm_start: if (!(qc->tf.flags & ATA_TFLAG_WRITE)) { ata_pio_sectors(qc); - ata_altstatus(ap); status = ata_wait_idle(ap); } @@ -5057,13 +5334,11 @@ fsm_start: if (ap->hsm_task_state == HSM_ST_LAST && (!(qc->tf.flags & ATA_TFLAG_WRITE))) { /* all data read */ - ata_altstatus(ap); status = ata_wait_idle(ap); goto fsm_start; } } - ata_altstatus(ap); /* flush */ poll_next = 1; break; @@ -5188,7 +5463,7 @@ static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap) struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev) { - struct ata_port *ap = dev->ap; + struct ata_port *ap = dev->link->ap; struct ata_queued_cmd *qc; qc = ata_qc_new(ap); @@ -5231,6 +5506,7 @@ void ata_qc_free(struct ata_queued_cmd *qc) void __ata_qc_complete(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; + struct ata_link *link = qc->dev->link; WARN_ON(qc == NULL); /* ata_qc_from_tag _might_ return NULL */ WARN_ON(!(qc->flags & ATA_QCFLAG_ACTIVE)); @@ -5239,10 +5515,19 @@ void __ata_qc_complete(struct ata_queued_cmd *qc) ata_sg_clean(qc); /* command should be marked inactive atomically with qc completion */ - if (qc->tf.protocol == ATA_PROT_NCQ) - ap->sactive &= ~(1 << qc->tag); - else - ap->active_tag = ATA_TAG_POISON; + if (qc->tf.protocol == ATA_PROT_NCQ) { + link->sactive &= ~(1 << qc->tag); + if (!link->sactive) + ap->nr_active_links--; + } else { + link->active_tag = ATA_TAG_POISON; + ap->nr_active_links--; + } + + /* clear exclusive status */ + if (unlikely(qc->flags & ATA_QCFLAG_CLEAR_EXCL && + ap->excl_link == link)) + ap->excl_link = NULL; /* atapi: mark qc as inactive to prevent the interrupt handler * from completing the command twice later, before the error handler @@ -5411,19 +5696,25 @@ static inline int ata_should_dma_map(struct ata_queued_cmd *qc) void ata_qc_issue(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; + struct ata_link *link = qc->dev->link; /* Make sure only one non-NCQ command is outstanding. The * check is skipped for old EH because it reuses active qc to * request ATAPI sense. */ - WARN_ON(ap->ops->error_handler && ata_tag_valid(ap->active_tag)); + WARN_ON(ap->ops->error_handler && ata_tag_valid(link->active_tag)); if (qc->tf.protocol == ATA_PROT_NCQ) { - WARN_ON(ap->sactive & (1 << qc->tag)); - ap->sactive |= 1 << qc->tag; + WARN_ON(link->sactive & (1 << qc->tag)); + + if (!link->sactive) + ap->nr_active_links++; + link->sactive |= 1 << qc->tag; } else { - WARN_ON(ap->sactive); - ap->active_tag = qc->tag; + WARN_ON(link->sactive); + + ap->nr_active_links++; + link->active_tag = qc->tag; } qc->flags |= ATA_QCFLAG_ACTIVE; @@ -5606,7 +5897,7 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) inline unsigned int ata_host_intr (struct ata_port *ap, struct ata_queued_cmd *qc) { - struct ata_eh_info *ehi = &ap->eh_info; + struct ata_eh_info *ehi = &ap->link.eh_info; u8 status, host_stat = 0; VPRINTK("ata%u: protocol %d task_state %d\n", @@ -5680,7 +5971,8 @@ idle_irq: #ifdef ATA_IRQ_TRAP if ((ap->stats.idle_irq % 1000) == 0) { - ap->ops->irq_ack(ap, 0); /* debug trap */ + ata_chk_status(ap); + ap->ops->irq_clear(ap); ata_port_printk(ap, KERN_WARNING, "irq trap\n"); return 1; } @@ -5721,7 +6013,7 @@ irqreturn_t ata_interrupt (int irq, void *dev_instance) !(ap->flags & ATA_FLAG_DISABLED)) { struct ata_queued_cmd *qc; - qc = ata_qc_from_tag(ap, ap->active_tag); + qc = ata_qc_from_tag(ap, ap->link.active_tag); if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)) && (qc->flags & ATA_QCFLAG_ACTIVE)) handled |= ata_host_intr(ap, qc); @@ -5735,9 +6027,9 @@ irqreturn_t ata_interrupt (int irq, void *dev_instance) /** * sata_scr_valid - test whether SCRs are accessible - * @ap: ATA port to test SCR accessibility for + * @link: ATA link to test SCR accessibility for * - * Test whether SCRs are accessible for @ap. + * Test whether SCRs are accessible for @link. * * LOCKING: * None. @@ -5745,60 +6037,74 @@ irqreturn_t ata_interrupt (int irq, void *dev_instance) * RETURNS: * 1 if SCRs are accessible, 0 otherwise. */ -int sata_scr_valid(struct ata_port *ap) +int sata_scr_valid(struct ata_link *link) { + struct ata_port *ap = link->ap; + return (ap->flags & ATA_FLAG_SATA) && ap->ops->scr_read; } /** * sata_scr_read - read SCR register of the specified port - * @ap: ATA port to read SCR for + * @link: ATA link to read SCR for * @reg: SCR to read * @val: Place to store read value * - * Read SCR register @reg of @ap into *@val. This function is - * guaranteed to succeed if the cable type of the port is SATA - * and the port implements ->scr_read. + * Read SCR register @reg of @link into *@val. This function is + * guaranteed to succeed if @link is ap->link, the cable type of + * the port is SATA and the port implements ->scr_read. * * LOCKING: - * None. + * None if @link is ap->link. Kernel thread context otherwise. * * RETURNS: * 0 on success, negative errno on failure. */ -int sata_scr_read(struct ata_port *ap, int reg, u32 *val) +int sata_scr_read(struct ata_link *link, int reg, u32 *val) { - if (sata_scr_valid(ap)) - return ap->ops->scr_read(ap, reg, val); - return -EOPNOTSUPP; + if (ata_is_host_link(link)) { + struct ata_port *ap = link->ap; + + if (sata_scr_valid(link)) + return ap->ops->scr_read(ap, reg, val); + return -EOPNOTSUPP; + } + + return sata_pmp_scr_read(link, reg, val); } /** * sata_scr_write - write SCR register of the specified port - * @ap: ATA port to write SCR for + * @link: ATA link to write SCR for * @reg: SCR to write * @val: value to write * - * Write @val to SCR register @reg of @ap. This function is - * guaranteed to succeed if the cable type of the port is SATA - * and the port implements ->scr_read. + * Write @val to SCR register @reg of @link. This function is + * guaranteed to succeed if @link is ap->link, the cable type of + * the port is SATA and the port implements ->scr_read. * * LOCKING: - * None. + * None if @link is ap->link. Kernel thread context otherwise. * * RETURNS: * 0 on success, negative errno on failure. */ -int sata_scr_write(struct ata_port *ap, int reg, u32 val) +int sata_scr_write(struct ata_link *link, int reg, u32 val) { - if (sata_scr_valid(ap)) - return ap->ops->scr_write(ap, reg, val); - return -EOPNOTSUPP; + if (ata_is_host_link(link)) { + struct ata_port *ap = link->ap; + + if (sata_scr_valid(link)) + return ap->ops->scr_write(ap, reg, val); + return -EOPNOTSUPP; + } + + return sata_pmp_scr_write(link, reg, val); } /** * sata_scr_write_flush - write SCR register of the specified port and flush - * @ap: ATA port to write SCR for + * @link: ATA link to write SCR for * @reg: SCR to write * @val: value to write * @@ -5806,31 +6112,36 @@ int sata_scr_write(struct ata_port *ap, int reg, u32 val) * function performs flush after writing to the register. * * LOCKING: - * None. + * None if @link is ap->link. Kernel thread context otherwise. * * RETURNS: * 0 on success, negative errno on failure. */ -int sata_scr_write_flush(struct ata_port *ap, int reg, u32 val) +int sata_scr_write_flush(struct ata_link *link, int reg, u32 val) { - int rc; + if (ata_is_host_link(link)) { + struct ata_port *ap = link->ap; + int rc; - if (sata_scr_valid(ap)) { - rc = ap->ops->scr_write(ap, reg, val); - if (rc == 0) - rc = ap->ops->scr_read(ap, reg, &val); - return rc; + if (sata_scr_valid(link)) { + rc = ap->ops->scr_write(ap, reg, val); + if (rc == 0) + rc = ap->ops->scr_read(ap, reg, &val); + return rc; + } + return -EOPNOTSUPP; } - return -EOPNOTSUPP; + + return sata_pmp_scr_write(link, reg, val); } /** - * ata_port_online - test whether the given port is online - * @ap: ATA port to test + * ata_link_online - test whether the given link is online + * @link: ATA link to test * - * Test whether @ap is online. Note that this function returns 0 - * if online status of @ap cannot be obtained, so - * ata_port_online(ap) != !ata_port_offline(ap). + * Test whether @link is online. Note that this function returns + * 0 if online status of @link cannot be obtained, so + * ata_link_online(link) != !ata_link_offline(link). * * LOCKING: * None. @@ -5838,22 +6149,23 @@ int sata_scr_write_flush(struct ata_port *ap, int reg, u32 val) * RETURNS: * 1 if the port online status is available and online. */ -int ata_port_online(struct ata_port *ap) +int ata_link_online(struct ata_link *link) { u32 sstatus; - if (!sata_scr_read(ap, SCR_STATUS, &sstatus) && (sstatus & 0xf) == 0x3) + if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0 && + (sstatus & 0xf) == 0x3) return 1; return 0; } /** - * ata_port_offline - test whether the given port is offline - * @ap: ATA port to test + * ata_link_offline - test whether the given link is offline + * @link: ATA link to test * - * Test whether @ap is offline. Note that this function returns - * 0 if offline status of @ap cannot be obtained, so - * ata_port_online(ap) != !ata_port_offline(ap). + * Test whether @link is offline. Note that this function + * returns 0 if offline status of @link cannot be obtained, so + * ata_link_online(link) != !ata_link_offline(link). * * LOCKING: * None. @@ -5861,11 +6173,12 @@ int ata_port_online(struct ata_port *ap) * RETURNS: * 1 if the port offline status is available and offline. */ -int ata_port_offline(struct ata_port *ap) +int ata_link_offline(struct ata_link *link) { u32 sstatus; - if (!sata_scr_read(ap, SCR_STATUS, &sstatus) && (sstatus & 0xf) != 0x3) + if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0 && + (sstatus & 0xf) != 0x3) return 1; return 0; } @@ -5883,6 +6196,10 @@ int ata_flush_cache(struct ata_device *dev) else cmd = ATA_CMD_FLUSH; + /* This is wrong. On a failed flush we get back the LBA of the lost + sector and we should (assuming it wasn't aborted as unknown) issue + a further flush command to continue the writeback until it + does not error */ err_mask = ata_do_simple_cmd(dev, cmd); if (err_mask) { ata_dev_printk(dev, KERN_ERR, "failed to flush cache\n"); @@ -5902,6 +6219,7 @@ static int ata_host_request_pm(struct ata_host *host, pm_message_t mesg, for (i = 0; i < host->n_ports; i++) { struct ata_port *ap = host->ports[i]; + struct ata_link *link; /* Previous resume operation might still be in * progress. Wait for PM_PENDING to clear. @@ -5921,8 +6239,10 @@ static int ata_host_request_pm(struct ata_host *host, pm_message_t mesg, } ap->pflags |= ATA_PFLAG_PM_PENDING; - ap->eh_info.action |= action; - ap->eh_info.flags |= ehi_flags; + __ata_port_for_each_link(link, ap) { + link->eh_info.action |= action; + link->eh_info.flags |= ehi_flags; + } ata_port_schedule_eh(ap); @@ -6026,12 +6346,13 @@ int ata_port_start(struct ata_port *ap) */ void ata_dev_init(struct ata_device *dev) { - struct ata_port *ap = dev->ap; + struct ata_link *link = dev->link; + struct ata_port *ap = link->ap; unsigned long flags; /* SATA spd limit is bound to the first device */ - ap->sata_spd_limit = ap->hw_sata_spd_limit; - ap->sata_spd = 0; + link->sata_spd_limit = link->hw_sata_spd_limit; + link->sata_spd = 0; /* High bits of dev->flags are used to record warm plug * requests which occur asynchronously. Synchronize using @@ -6050,6 +6371,70 @@ void ata_dev_init(struct ata_device *dev) } /** + * ata_link_init - Initialize an ata_link structure + * @ap: ATA port link is attached to + * @link: Link structure to initialize + * @pmp: Port multiplier port number + * + * Initialize @link. + * + * LOCKING: + * Kernel thread context (may sleep) + */ +void ata_link_init(struct ata_port *ap, struct ata_link *link, int pmp) +{ + int i; + + /* clear everything except for devices */ + memset(link, 0, offsetof(struct ata_link, device[0])); + + link->ap = ap; + link->pmp = pmp; + link->active_tag = ATA_TAG_POISON; + link->hw_sata_spd_limit = UINT_MAX; + + /* can't use iterator, ap isn't initialized yet */ + for (i = 0; i < ATA_MAX_DEVICES; i++) { + struct ata_device *dev = &link->device[i]; + + dev->link = link; + dev->devno = dev - link->device; + ata_dev_init(dev); + } +} + +/** + * sata_link_init_spd - Initialize link->sata_spd_limit + * @link: Link to configure sata_spd_limit for + * + * Initialize @link->[hw_]sata_spd_limit to the currently + * configured value. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, -errno on failure. + */ +int sata_link_init_spd(struct ata_link *link) +{ + u32 scontrol, spd; + int rc; + + rc = sata_scr_read(link, SCR_CONTROL, &scontrol); + if (rc) + return rc; + + spd = (scontrol >> 4) & 0xf; + if (spd) + link->hw_sata_spd_limit &= (1 << spd) - 1; + + link->sata_spd_limit = link->hw_sata_spd_limit; + + return 0; +} + +/** * ata_port_alloc - allocate and initialize basic ATA port resources * @host: ATA host this allocated port belongs to * @@ -6064,7 +6449,6 @@ void ata_dev_init(struct ata_device *dev) struct ata_port *ata_port_alloc(struct ata_host *host) { struct ata_port *ap; - unsigned int i; DPRINTK("ENTER\n"); @@ -6079,9 +6463,6 @@ struct ata_port *ata_port_alloc(struct ata_host *host) ap->ctl = ATA_DEVCTL_OBS; ap->host = host; ap->dev = host->dev; - - ap->hw_sata_spd_limit = UINT_MAX; - ap->active_tag = ATA_TAG_POISON; ap->last_ctl = 0xFF; #if defined(ATA_VERBOSE_DEBUG) @@ -6104,12 +6485,7 @@ struct ata_port *ata_port_alloc(struct ata_host *host) ap->cbl = ATA_CBL_NONE; - for (i = 0; i < ATA_MAX_DEVICES; i++) { - struct ata_device *dev = &ap->device[i]; - dev->ap = ap; - dev->devno = i; - ata_dev_init(dev); - } + ata_link_init(ap, &ap->link, 0); #ifdef ATA_IRQ_TRAP ap->stats.unhandled_irq = 1; @@ -6145,6 +6521,7 @@ static void ata_host_release(struct device *gendev, void *res) if (ap->scsi_host) scsi_host_put(ap->scsi_host); + kfree(ap->pmp_link); kfree(ap); host->ports[i] = NULL; } @@ -6255,6 +6632,7 @@ struct ata_host *ata_host_alloc_pinfo(struct device *dev, ap->mwdma_mask = pi->mwdma_mask; ap->udma_mask = pi->udma_mask; ap->flags |= pi->flags; + ap->link.flags |= pi->link_flags; ap->ops = pi->port_ops; if (!host->ops && (pi->port_ops != &ata_dummy_port_ops)) @@ -6390,8 +6768,6 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht) /* set cable, sata_spd_limit and report */ for (i = 0; i < host->n_ports; i++) { struct ata_port *ap = host->ports[i]; - int irq_line; - u32 scontrol; unsigned long xfer_mask; /* set SATA cable type if still unset */ @@ -6399,32 +6775,20 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht) ap->cbl = ATA_CBL_SATA; /* init sata_spd_limit to the current value */ - if (sata_scr_read(ap, SCR_CONTROL, &scontrol) == 0) { - int spd = (scontrol >> 4) & 0xf; - if (spd) - ap->hw_sata_spd_limit &= (1 << spd) - 1; - } - ap->sata_spd_limit = ap->hw_sata_spd_limit; - - /* report the secondary IRQ for second channel legacy */ - irq_line = host->irq; - if (i == 1 && host->irq2) - irq_line = host->irq2; + sata_link_init_spd(&ap->link); + /* print per-port info to dmesg */ xfer_mask = ata_pack_xfermask(ap->pio_mask, ap->mwdma_mask, ap->udma_mask); - /* print per-port info to dmesg */ - if (!ata_port_is_dummy(ap)) - ata_port_printk(ap, KERN_INFO, "%cATA max %s cmd 0x%p " - "ctl 0x%p bmdma 0x%p irq %d\n", + if (!ata_port_is_dummy(ap)) { + ata_port_printk(ap, KERN_INFO, + "%cATA max %s %s\n", (ap->flags & ATA_FLAG_SATA) ? 'S' : 'P', ata_mode_string(xfer_mask), - ap->ioaddr.cmd_addr, - ap->ioaddr.ctl_addr, - ap->ioaddr.bmdma_addr, - irq_line); - else + ap->link.eh_info.desc); + ata_ehi_clear_desc(&ap->link.eh_info); + } else ata_port_printk(ap, KERN_INFO, "DUMMY\n"); } @@ -6436,7 +6800,7 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht) /* probe */ if (ap->ops->error_handler) { - struct ata_eh_info *ehi = &ap->eh_info; + struct ata_eh_info *ehi = &ap->link.eh_info; unsigned long flags; ata_port_probe(ap); @@ -6444,7 +6808,8 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht) /* kick EH for boot probing */ spin_lock_irqsave(ap->lock, flags); - ehi->probe_mask = (1 << ATA_MAX_DEVICES) - 1; + ehi->probe_mask = + (1 << ata_link_max_devices(&ap->link)) - 1; ehi->action |= ATA_EH_SOFTRESET; ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET; @@ -6506,7 +6871,7 @@ int ata_host_activate(struct ata_host *host, int irq, irq_handler_t irq_handler, unsigned long irq_flags, struct scsi_host_template *sht) { - int rc; + int i, rc; rc = ata_host_start(host); if (rc) @@ -6517,8 +6882,8 @@ int ata_host_activate(struct ata_host *host, int irq, if (rc) return rc; - /* Used to print device info at probe */ - host->irq = irq; + for (i = 0; i < host->n_ports; i++) + ata_port_desc(host->ports[i], "irq %d", irq); rc = ata_host_register(host, sht); /* if failed, just free the IRQ and leave ports alone */ @@ -6542,7 +6907,8 @@ int ata_host_activate(struct ata_host *host, int irq, void ata_port_detach(struct ata_port *ap) { unsigned long flags; - int i; + struct ata_link *link; + struct ata_device *dev; if (!ap->ops->error_handler) goto skip_eh; @@ -6559,8 +6925,10 @@ void ata_port_detach(struct ata_port *ap) */ spin_lock_irqsave(ap->lock, flags); - for (i = 0; i < ATA_MAX_DEVICES; i++) - ata_dev_disable(&ap->device[i]); + ata_port_for_each_link(link, ap) { + ata_link_for_each_dev(dev, link) + ata_dev_disable(dev); + } spin_unlock_irqrestore(ap->lock, flags); @@ -6639,7 +7007,7 @@ void ata_std_ports(struct ata_ioports *ioaddr) */ void ata_pci_remove_one(struct pci_dev *pdev) { - struct device *dev = pci_dev_to_dev(pdev); + struct device *dev = &pdev->dev; struct ata_host *host = dev_get_drvdata(dev); ata_host_detach(host); @@ -6847,7 +7215,6 @@ static unsigned int ata_dummy_qc_issue(struct ata_queued_cmd *qc) } const struct ata_port_operations ata_dummy_port_ops = { - .port_disable = ata_port_disable, .check_status = ata_dummy_check_status, .check_altstatus = ata_dummy_check_status, .dev_select = ata_noop_dev_select, @@ -6909,6 +7276,7 @@ EXPORT_SYMBOL_GPL(ata_interrupt); EXPORT_SYMBOL_GPL(ata_do_set_mode); EXPORT_SYMBOL_GPL(ata_data_xfer); EXPORT_SYMBOL_GPL(ata_data_xfer_noirq); +EXPORT_SYMBOL_GPL(ata_std_qc_defer); EXPORT_SYMBOL_GPL(ata_qc_prep); EXPORT_SYMBOL_GPL(ata_dumb_qc_prep); EXPORT_SYMBOL_GPL(ata_noop_qc_prep); @@ -6925,14 +7293,14 @@ EXPORT_SYMBOL_GPL(ata_bmdma_post_internal_cmd); EXPORT_SYMBOL_GPL(ata_port_probe); EXPORT_SYMBOL_GPL(ata_dev_disable); EXPORT_SYMBOL_GPL(sata_set_spd); -EXPORT_SYMBOL_GPL(sata_phy_debounce); -EXPORT_SYMBOL_GPL(sata_phy_resume); +EXPORT_SYMBOL_GPL(sata_link_debounce); +EXPORT_SYMBOL_GPL(sata_link_resume); EXPORT_SYMBOL_GPL(sata_phy_reset); EXPORT_SYMBOL_GPL(__sata_phy_reset); EXPORT_SYMBOL_GPL(ata_bus_reset); EXPORT_SYMBOL_GPL(ata_std_prereset); EXPORT_SYMBOL_GPL(ata_std_softreset); -EXPORT_SYMBOL_GPL(sata_port_hardreset); +EXPORT_SYMBOL_GPL(sata_link_hardreset); EXPORT_SYMBOL_GPL(sata_std_hardreset); EXPORT_SYMBOL_GPL(ata_std_postreset); EXPORT_SYMBOL_GPL(ata_dev_classify); @@ -6953,8 +7321,8 @@ EXPORT_SYMBOL_GPL(sata_scr_valid); EXPORT_SYMBOL_GPL(sata_scr_read); EXPORT_SYMBOL_GPL(sata_scr_write); EXPORT_SYMBOL_GPL(sata_scr_write_flush); -EXPORT_SYMBOL_GPL(ata_port_online); -EXPORT_SYMBOL_GPL(ata_port_offline); +EXPORT_SYMBOL_GPL(ata_link_online); +EXPORT_SYMBOL_GPL(ata_link_offline); #ifdef CONFIG_PM EXPORT_SYMBOL_GPL(ata_host_suspend); EXPORT_SYMBOL_GPL(ata_host_resume); @@ -6985,22 +7353,31 @@ EXPORT_SYMBOL_GPL(ata_pci_default_filter); EXPORT_SYMBOL_GPL(ata_pci_clear_simplex); #endif /* CONFIG_PCI */ +EXPORT_SYMBOL_GPL(sata_pmp_qc_defer_cmd_switch); +EXPORT_SYMBOL_GPL(sata_pmp_std_prereset); +EXPORT_SYMBOL_GPL(sata_pmp_std_hardreset); +EXPORT_SYMBOL_GPL(sata_pmp_std_postreset); +EXPORT_SYMBOL_GPL(sata_pmp_do_eh); + EXPORT_SYMBOL_GPL(__ata_ehi_push_desc); EXPORT_SYMBOL_GPL(ata_ehi_push_desc); EXPORT_SYMBOL_GPL(ata_ehi_clear_desc); +EXPORT_SYMBOL_GPL(ata_port_desc); +#ifdef CONFIG_PCI +EXPORT_SYMBOL_GPL(ata_port_pbar_desc); +#endif /* CONFIG_PCI */ EXPORT_SYMBOL_GPL(ata_eng_timeout); EXPORT_SYMBOL_GPL(ata_port_schedule_eh); +EXPORT_SYMBOL_GPL(ata_link_abort); EXPORT_SYMBOL_GPL(ata_port_abort); EXPORT_SYMBOL_GPL(ata_port_freeze); +EXPORT_SYMBOL_GPL(sata_async_notification); EXPORT_SYMBOL_GPL(ata_eh_freeze_port); EXPORT_SYMBOL_GPL(ata_eh_thaw_port); EXPORT_SYMBOL_GPL(ata_eh_qc_complete); EXPORT_SYMBOL_GPL(ata_eh_qc_retry); EXPORT_SYMBOL_GPL(ata_do_eh); EXPORT_SYMBOL_GPL(ata_irq_on); -EXPORT_SYMBOL_GPL(ata_dummy_irq_on); -EXPORT_SYMBOL_GPL(ata_irq_ack); -EXPORT_SYMBOL_GPL(ata_dummy_irq_ack); EXPORT_SYMBOL_GPL(ata_dev_try_classify); EXPORT_SYMBOL_GPL(ata_cable_40wire); diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index ac6ceed..2eaa39f 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -33,6 +33,7 @@ */ #include <linux/kernel.h> +#include <linux/pci.h> #include <scsi/scsi.h> #include <scsi/scsi_host.h> #include <scsi/scsi_eh.h> @@ -74,7 +75,6 @@ static const unsigned long ata_eh_reset_timeouts[] = { }; static void __ata_port_freeze(struct ata_port *ap); -static void ata_eh_finish(struct ata_port *ap); #ifdef CONFIG_PM static void ata_eh_handle_port_suspend(struct ata_port *ap); static void ata_eh_handle_port_resume(struct ata_port *ap); @@ -151,6 +151,73 @@ void ata_ehi_clear_desc(struct ata_eh_info *ehi) ehi->desc_len = 0; } +/** + * ata_port_desc - append port description + * @ap: target ATA port + * @fmt: printf format string + * + * Format string according to @fmt and append it to port + * description. If port description is not empty, " " is added + * in-between. This function is to be used while initializing + * ata_host. The description is printed on host registration. + * + * LOCKING: + * None. + */ +void ata_port_desc(struct ata_port *ap, const char *fmt, ...) +{ + va_list args; + + WARN_ON(!(ap->pflags & ATA_PFLAG_INITIALIZING)); + + if (ap->link.eh_info.desc_len) + __ata_ehi_push_desc(&ap->link.eh_info, " "); + + va_start(args, fmt); + __ata_ehi_pushv_desc(&ap->link.eh_info, fmt, args); + va_end(args); +} + +#ifdef CONFIG_PCI + +/** + * ata_port_pbar_desc - append PCI BAR description + * @ap: target ATA port + * @bar: target PCI BAR + * @offset: offset into PCI BAR + * @name: name of the area + * + * If @offset is negative, this function formats a string which + * contains the name, address, size and type of the BAR and + * appends it to the port description. If @offset is zero or + * positive, only name and offsetted address is appended. + * + * LOCKING: + * None. + */ +void ata_port_pbar_desc(struct ata_port *ap, int bar, ssize_t offset, + const char *name) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + char *type = ""; + unsigned long long start, len; + + if (pci_resource_flags(pdev, bar) & IORESOURCE_MEM) + type = "m"; + else if (pci_resource_flags(pdev, bar) & IORESOURCE_IO) + type = "i"; + + start = (unsigned long long)pci_resource_start(pdev, bar); + len = (unsigned long long)pci_resource_len(pdev, bar); + + if (offset < 0) + ata_port_desc(ap, "%s %s%llu@0x%llx", name, type, len, start); + else + ata_port_desc(ap, "%s 0x%llx", name, start + offset); +} + +#endif /* CONFIG_PCI */ + static void ata_ering_record(struct ata_ering *ering, int is_io, unsigned int err_mask) { @@ -195,28 +262,29 @@ static int ata_ering_map(struct ata_ering *ering, static unsigned int ata_eh_dev_action(struct ata_device *dev) { - struct ata_eh_context *ehc = &dev->ap->eh_context; + struct ata_eh_context *ehc = &dev->link->eh_context; return ehc->i.action | ehc->i.dev_action[dev->devno]; } -static void ata_eh_clear_action(struct ata_device *dev, +static void ata_eh_clear_action(struct ata_link *link, struct ata_device *dev, struct ata_eh_info *ehi, unsigned int action) { - int i; + struct ata_device *tdev; if (!dev) { ehi->action &= ~action; - for (i = 0; i < ATA_MAX_DEVICES; i++) - ehi->dev_action[i] &= ~action; + ata_link_for_each_dev(tdev, link) + ehi->dev_action[tdev->devno] &= ~action; } else { /* doesn't make sense for port-wide EH actions */ WARN_ON(!(action & ATA_EH_PERDEV_MASK)); /* break ehi->action into ehi->dev_action */ if (ehi->action & action) { - for (i = 0; i < ATA_MAX_DEVICES; i++) - ehi->dev_action[i] |= ehi->action & action; + ata_link_for_each_dev(tdev, link) + ehi->dev_action[tdev->devno] |= + ehi->action & action; ehi->action &= ~action; } @@ -261,7 +329,7 @@ enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd) ret = EH_HANDLED; spin_lock_irqsave(ap->lock, flags); - qc = ata_qc_from_tag(ap, ap->active_tag); + qc = ata_qc_from_tag(ap, ap->link.active_tag); if (qc) { WARN_ON(qc->scsicmd != cmd); qc->flags |= ATA_QCFLAG_EH_SCHEDULED; @@ -290,7 +358,7 @@ enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd) void ata_scsi_error(struct Scsi_Host *host) { struct ata_port *ap = ata_shost_to_port(host); - int i, repeat_cnt = ATA_EH_MAX_REPEAT; + int i; unsigned long flags; DPRINTK("ENTER\n"); @@ -356,12 +424,17 @@ void ata_scsi_error(struct Scsi_Host *host) __ata_port_freeze(ap); spin_unlock_irqrestore(ap->lock, flags); + + /* initialize eh_tries */ + ap->eh_tries = ATA_EH_MAX_TRIES; } else spin_unlock_wait(ap->lock); repeat: /* invoke error handler */ if (ap->ops->error_handler) { + struct ata_link *link; + /* kill fast drain timer */ del_timer_sync(&ap->fastdrain_timer); @@ -371,12 +444,15 @@ void ata_scsi_error(struct Scsi_Host *host) /* fetch & clear EH info */ spin_lock_irqsave(ap->lock, flags); - memset(&ap->eh_context, 0, sizeof(ap->eh_context)); - ap->eh_context.i = ap->eh_info; - memset(&ap->eh_info, 0, sizeof(ap->eh_info)); + __ata_port_for_each_link(link, ap) { + memset(&link->eh_context, 0, sizeof(link->eh_context)); + link->eh_context.i = link->eh_info; + memset(&link->eh_info, 0, sizeof(link->eh_info)); + } ap->pflags |= ATA_PFLAG_EH_IN_PROGRESS; ap->pflags &= ~ATA_PFLAG_EH_PENDING; + ap->excl_link = NULL; /* don't maintain exclusion over EH */ spin_unlock_irqrestore(ap->lock, flags); @@ -396,20 +472,18 @@ void ata_scsi_error(struct Scsi_Host *host) spin_lock_irqsave(ap->lock, flags); if (ap->pflags & ATA_PFLAG_EH_PENDING) { - if (--repeat_cnt) { - ata_port_printk(ap, KERN_INFO, - "EH pending after completion, " - "repeating EH (cnt=%d)\n", repeat_cnt); + if (--ap->eh_tries) { spin_unlock_irqrestore(ap->lock, flags); goto repeat; } ata_port_printk(ap, KERN_ERR, "EH pending after %d " - "tries, giving up\n", ATA_EH_MAX_REPEAT); + "tries, giving up\n", ATA_EH_MAX_TRIES); ap->pflags &= ~ATA_PFLAG_EH_PENDING; } /* this run is complete, make sure EH info is clear */ - memset(&ap->eh_info, 0, sizeof(ap->eh_info)); + __ata_port_for_each_link(link, ap) + memset(&link->eh_info, 0, sizeof(link->eh_info)); /* Clear host_eh_scheduled while holding ap->lock such * that if exception occurs after this point but @@ -420,7 +494,7 @@ void ata_scsi_error(struct Scsi_Host *host) spin_unlock_irqrestore(ap->lock, flags); } else { - WARN_ON(ata_qc_from_tag(ap, ap->active_tag) == NULL); + WARN_ON(ata_qc_from_tag(ap, ap->link.active_tag) == NULL); ap->ops->eng_timeout(ap); } @@ -575,7 +649,7 @@ void ata_eng_timeout(struct ata_port *ap) { DPRINTK("ENTER\n"); - ata_qc_timeout(ata_qc_from_tag(ap, ap->active_tag)); + ata_qc_timeout(ata_qc_from_tag(ap, ap->link.active_tag)); DPRINTK("EXIT\n"); } @@ -718,19 +792,7 @@ void ata_port_schedule_eh(struct ata_port *ap) DPRINTK("port EH scheduled\n"); } -/** - * ata_port_abort - abort all qc's on the port - * @ap: ATA port to abort qc's for - * - * Abort all active qc's of @ap and schedule EH. - * - * LOCKING: - * spin_lock_irqsave(host lock) - * - * RETURNS: - * Number of aborted qc's. - */ -int ata_port_abort(struct ata_port *ap) +static int ata_do_link_abort(struct ata_port *ap, struct ata_link *link) { int tag, nr_aborted = 0; @@ -742,7 +804,7 @@ int ata_port_abort(struct ata_port *ap) for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { struct ata_queued_cmd *qc = ata_qc_from_tag(ap, tag); - if (qc) { + if (qc && (!link || qc->dev->link == link)) { qc->flags |= ATA_QCFLAG_FAILED; ata_qc_complete(qc); nr_aborted++; @@ -756,6 +818,40 @@ int ata_port_abort(struct ata_port *ap) } /** + * ata_link_abort - abort all qc's on the link + * @link: ATA link to abort qc's for + * + * Abort all active qc's active on @link and schedule EH. + * + * LOCKING: + * spin_lock_irqsave(host lock) + * + * RETURNS: + * Number of aborted qc's. + */ +int ata_link_abort(struct ata_link *link) +{ + return ata_do_link_abort(link->ap, link); +} + +/** + * ata_port_abort - abort all qc's on the port + * @ap: ATA port to abort qc's for + * + * Abort all active qc's of @ap and schedule EH. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + * + * RETURNS: + * Number of aborted qc's. + */ +int ata_port_abort(struct ata_port *ap) +{ + return ata_do_link_abort(ap, NULL); +} + +/** * __ata_port_freeze - freeze port * @ap: ATA port to freeze * @@ -810,6 +906,79 @@ int ata_port_freeze(struct ata_port *ap) } /** + * sata_async_notification - SATA async notification handler + * @ap: ATA port where async notification is received + * + * Handler to be called when async notification via SDB FIS is + * received. This function schedules EH if necessary. + * + * LOCKING: + * spin_lock_irqsave(host lock) + * + * RETURNS: + * 1 if EH is scheduled, 0 otherwise. + */ +int sata_async_notification(struct ata_port *ap) +{ + u32 sntf; + int rc; + + if (!(ap->flags & ATA_FLAG_AN)) + return 0; + + rc = sata_scr_read(&ap->link, SCR_NOTIFICATION, &sntf); + if (rc == 0) + sata_scr_write(&ap->link, SCR_NOTIFICATION, sntf); + + if (!ap->nr_pmp_links || rc) { + /* PMP is not attached or SNTF is not available */ + if (!ap->nr_pmp_links) { + /* PMP is not attached. Check whether ATAPI + * AN is configured. If so, notify media + * change. + */ + struct ata_device *dev = ap->link.device; + + if ((dev->class == ATA_DEV_ATAPI) && + (dev->flags & ATA_DFLAG_AN)) + ata_scsi_media_change_notify(dev); + return 0; + } else { + /* PMP is attached but SNTF is not available. + * ATAPI async media change notification is + * not used. The PMP must be reporting PHY + * status change, schedule EH. + */ + ata_port_schedule_eh(ap); + return 1; + } + } else { + /* PMP is attached and SNTF is available */ + struct ata_link *link; + + /* check and notify ATAPI AN */ + ata_port_for_each_link(link, ap) { + if (!(sntf & (1 << link->pmp))) + continue; + + if ((link->device->class == ATA_DEV_ATAPI) && + (link->device->flags & ATA_DFLAG_AN)) + ata_scsi_media_change_notify(link->device); + } + + /* If PMP is reporting that PHY status of some + * downstream ports has changed, schedule EH. + */ + if (sntf & (1 << SATA_PMP_CTRL_PORT)) { + ata_port_schedule_eh(ap); + return 1; + } + + return 0; + } +} + +/** * ata_eh_freeze_port - EH helper to freeze port * @ap: ATA port to freeze * @@ -920,9 +1089,10 @@ void ata_eh_qc_retry(struct ata_queued_cmd *qc) * LOCKING: * None. */ -static void ata_eh_detach_dev(struct ata_device *dev) +void ata_eh_detach_dev(struct ata_device *dev) { - struct ata_port *ap = dev->ap; + struct ata_link *link = dev->link; + struct ata_port *ap = link->ap; unsigned long flags; ata_dev_disable(dev); @@ -937,31 +1107,32 @@ static void ata_eh_detach_dev(struct ata_device *dev) } /* clear per-dev EH actions */ - ata_eh_clear_action(dev, &ap->eh_info, ATA_EH_PERDEV_MASK); - ata_eh_clear_action(dev, &ap->eh_context.i, ATA_EH_PERDEV_MASK); + ata_eh_clear_action(link, dev, &link->eh_info, ATA_EH_PERDEV_MASK); + ata_eh_clear_action(link, dev, &link->eh_context.i, ATA_EH_PERDEV_MASK); spin_unlock_irqrestore(ap->lock, flags); } /** * ata_eh_about_to_do - about to perform eh_action - * @ap: target ATA port + * @link: target ATA link * @dev: target ATA dev for per-dev action (can be NULL) * @action: action about to be performed * * Called just before performing EH actions to clear related bits - * in @ap->eh_info such that eh actions are not unnecessarily + * in @link->eh_info such that eh actions are not unnecessarily * repeated. * * LOCKING: * None. */ -static void ata_eh_about_to_do(struct ata_port *ap, struct ata_device *dev, - unsigned int action) +void ata_eh_about_to_do(struct ata_link *link, struct ata_device *dev, + unsigned int action) { + struct ata_port *ap = link->ap; + struct ata_eh_info *ehi = &link->eh_info; + struct ata_eh_context *ehc = &link->eh_context; unsigned long flags; - struct ata_eh_info *ehi = &ap->eh_info; - struct ata_eh_context *ehc = &ap->eh_context; spin_lock_irqsave(ap->lock, flags); @@ -978,7 +1149,7 @@ static void ata_eh_about_to_do(struct ata_port *ap, struct ata_device *dev, ehi->flags &= ~ATA_EHI_RESET_MODIFIER_MASK; } - ata_eh_clear_action(dev, ehi, action); + ata_eh_clear_action(link, dev, ehi, action); if (!(ehc->i.flags & ATA_EHI_QUIET)) ap->pflags |= ATA_PFLAG_RECOVERED; @@ -988,26 +1159,28 @@ static void ata_eh_about_to_do(struct ata_port *ap, struct ata_device *dev, /** * ata_eh_done - EH action complete - * @ap: target ATA port +* @ap: target ATA port * @dev: target ATA dev for per-dev action (can be NULL) * @action: action just completed * * Called right after performing EH actions to clear related bits - * in @ap->eh_context. + * in @link->eh_context. * * LOCKING: * None. */ -static void ata_eh_done(struct ata_port *ap, struct ata_device *dev, - unsigned int action) +void ata_eh_done(struct ata_link *link, struct ata_device *dev, + unsigned int action) { + struct ata_eh_context *ehc = &link->eh_context; + /* if reset is complete, clear all reset actions & reset modifier */ if (action & ATA_EH_RESET_MASK) { action |= ATA_EH_RESET_MASK; - ap->eh_context.i.flags &= ~ATA_EHI_RESET_MODIFIER_MASK; + ehc->i.flags &= ~ATA_EHI_RESET_MODIFIER_MASK; } - ata_eh_clear_action(dev, &ap->eh_context.i, action); + ata_eh_clear_action(link, dev, &ehc->i, action); } /** @@ -1077,7 +1250,7 @@ static unsigned int ata_read_log_page(struct ata_device *dev, tf.protocol = ATA_PROT_PIO; err_mask = ata_exec_internal(dev, &tf, NULL, DMA_FROM_DEVICE, - buf, sectors * ATA_SECT_SIZE); + buf, sectors * ATA_SECT_SIZE, 0); DPRINTK("EXIT, err_mask=%x\n", err_mask); return err_mask; @@ -1101,7 +1274,7 @@ static unsigned int ata_read_log_page(struct ata_device *dev, static int ata_eh_read_log_10h(struct ata_device *dev, int *tag, struct ata_taskfile *tf) { - u8 *buf = dev->ap->sector_buf; + u8 *buf = dev->link->ap->sector_buf; unsigned int err_mask; u8 csum; int i; @@ -1155,7 +1328,7 @@ static unsigned int atapi_eh_request_sense(struct ata_queued_cmd *qc) { struct ata_device *dev = qc->dev; unsigned char *sense_buf = qc->scsicmd->sense_buffer; - struct ata_port *ap = dev->ap; + struct ata_port *ap = dev->link->ap; struct ata_taskfile tf; u8 cdb[ATAPI_CDB_LEN]; @@ -1191,12 +1364,12 @@ static unsigned int atapi_eh_request_sense(struct ata_queued_cmd *qc) } return ata_exec_internal(dev, &tf, cdb, DMA_FROM_DEVICE, - sense_buf, SCSI_SENSE_BUFFERSIZE); + sense_buf, SCSI_SENSE_BUFFERSIZE, 0); } /** * ata_eh_analyze_serror - analyze SError for a failed port - * @ap: ATA port to analyze SError for + * @link: ATA link to analyze SError for * * Analyze SError if available and further determine cause of * failure. @@ -1204,11 +1377,12 @@ static unsigned int atapi_eh_request_sense(struct ata_queued_cmd *qc) * LOCKING: * None. */ -static void ata_eh_analyze_serror(struct ata_port *ap) +static void ata_eh_analyze_serror(struct ata_link *link) { - struct ata_eh_context *ehc = &ap->eh_context; + struct ata_eh_context *ehc = &link->eh_context; u32 serror = ehc->i.serror; unsigned int err_mask = 0, action = 0; + u32 hotplug_mask; if (serror & SERR_PERSISTENT) { err_mask |= AC_ERR_ATA_BUS; @@ -1227,7 +1401,20 @@ static void ata_eh_analyze_serror(struct ata_port *ap) err_mask |= AC_ERR_SYSTEM; action |= ATA_EH_HARDRESET; } - if (serror & (SERR_PHYRDY_CHG | SERR_DEV_XCHG)) + + /* Determine whether a hotplug event has occurred. Both + * SError.N/X are considered hotplug events for enabled or + * host links. For disabled PMP links, only N bit is + * considered as X bit is left at 1 for link plugging. + */ + hotplug_mask = 0; + + if (!(link->flags & ATA_LFLAG_DISABLED) || ata_is_host_link(link)) + hotplug_mask = SERR_PHYRDY_CHG | SERR_DEV_XCHG; + else + hotplug_mask = SERR_PHYRDY_CHG; + + if (serror & hotplug_mask) ata_ehi_hotplugged(&ehc->i); ehc->i.err_mask |= err_mask; @@ -1236,7 +1423,7 @@ static void ata_eh_analyze_serror(struct ata_port *ap) /** * ata_eh_analyze_ncq_error - analyze NCQ error - * @ap: ATA port to analyze NCQ error for + * @link: ATA link to analyze NCQ error for * * Read log page 10h, determine the offending qc and acquire * error status TF. For NCQ device errors, all LLDDs have to do @@ -1246,10 +1433,11 @@ static void ata_eh_analyze_serror(struct ata_port *ap) * LOCKING: * Kernel thread context (may sleep). */ -static void ata_eh_analyze_ncq_error(struct ata_port *ap) +static void ata_eh_analyze_ncq_error(struct ata_link *link) { - struct ata_eh_context *ehc = &ap->eh_context; - struct ata_device *dev = ap->device; + struct ata_port *ap = link->ap; + struct ata_eh_context *ehc = &link->eh_context; + struct ata_device *dev = link->device; struct ata_queued_cmd *qc; struct ata_taskfile tf; int tag, rc; @@ -1259,7 +1447,7 @@ static void ata_eh_analyze_ncq_error(struct ata_port *ap) return; /* is it NCQ device error? */ - if (!ap->sactive || !(ehc->i.err_mask & AC_ERR_DEV)) + if (!link->sactive || !(ehc->i.err_mask & AC_ERR_DEV)) return; /* has LLDD analyzed already? */ @@ -1276,13 +1464,13 @@ static void ata_eh_analyze_ncq_error(struct ata_port *ap) /* okay, this error is ours */ rc = ata_eh_read_log_10h(dev, &tag, &tf); if (rc) { - ata_port_printk(ap, KERN_ERR, "failed to read log page 10h " + ata_link_printk(link, KERN_ERR, "failed to read log page 10h " "(errno=%d)\n", rc); return; } - if (!(ap->sactive & (1 << tag))) { - ata_port_printk(ap, KERN_ERR, "log page 10h reported " + if (!(link->sactive & (1 << tag))) { + ata_link_printk(link, KERN_ERR, "log page 10h reported " "inactive tag %d\n", tag); return; } @@ -1497,7 +1685,7 @@ static unsigned int ata_eh_speed_down(struct ata_device *dev, int is_io, /* speed down? */ if (verdict & ATA_EH_SPDN_SPEED_DOWN) { /* speed down SATA link speed if possible */ - if (sata_down_spd_limit(dev->ap) == 0) { + if (sata_down_spd_limit(dev->link) == 0) { action |= ATA_EH_HARDRESET; goto done; } @@ -1528,7 +1716,7 @@ static unsigned int ata_eh_speed_down(struct ata_device *dev, int is_io, * SATA. Consider it only for PATA. */ if ((verdict & ATA_EH_SPDN_FALLBACK_TO_PIO) && (dev->spdn_cnt >= 2) && - (dev->ap->cbl != ATA_CBL_SATA) && + (dev->link->ap->cbl != ATA_CBL_SATA) && (dev->xfer_shift != ATA_SHIFT_PIO)) { if (ata_down_xfermask_limit(dev, ATA_DNXFER_FORCE_PIO) == 0) { dev->spdn_cnt = 0; @@ -1545,19 +1733,20 @@ static unsigned int ata_eh_speed_down(struct ata_device *dev, int is_io, } /** - * ata_eh_autopsy - analyze error and determine recovery action - * @ap: ATA port to perform autopsy on + * ata_eh_link_autopsy - analyze error and determine recovery action + * @link: host link to perform autopsy on * - * Analyze why @ap failed and determine which recovery action is - * needed. This function also sets more detailed AC_ERR_* values - * and fills sense data for ATAPI CHECK SENSE. + * Analyze why @link failed and determine which recovery actions + * are needed. This function also sets more detailed AC_ERR_* + * values and fills sense data for ATAPI CHECK SENSE. * * LOCKING: * Kernel thread context (may sleep). */ -static void ata_eh_autopsy(struct ata_port *ap) +static void ata_eh_link_autopsy(struct ata_link *link) { - struct ata_eh_context *ehc = &ap->eh_context; + struct ata_port *ap = link->ap; + struct ata_eh_context *ehc = &link->eh_context; unsigned int all_err_mask = 0; int tag, is_io = 0; u32 serror; @@ -1569,10 +1758,10 @@ static void ata_eh_autopsy(struct ata_port *ap) return; /* obtain and analyze SError */ - rc = sata_scr_read(ap, SCR_ERROR, &serror); + rc = sata_scr_read(link, SCR_ERROR, &serror); if (rc == 0) { ehc->i.serror |= serror; - ata_eh_analyze_serror(ap); + ata_eh_analyze_serror(link); } else if (rc != -EOPNOTSUPP) { /* SError read failed, force hardreset and probing */ ata_ehi_schedule_probe(&ehc->i); @@ -1581,7 +1770,7 @@ static void ata_eh_autopsy(struct ata_port *ap) } /* analyze NCQ failure */ - ata_eh_analyze_ncq_error(ap); + ata_eh_analyze_ncq_error(link); /* any real error trumps AC_ERR_OTHER */ if (ehc->i.err_mask & ~AC_ERR_OTHER) @@ -1592,7 +1781,7 @@ static void ata_eh_autopsy(struct ata_port *ap) for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag); - if (!(qc->flags & ATA_QCFLAG_FAILED)) + if (!(qc->flags & ATA_QCFLAG_FAILED) || qc->dev->link != link) continue; /* inherit upper level err_mask */ @@ -1646,20 +1835,43 @@ static void ata_eh_autopsy(struct ata_port *ap) } /** - * ata_eh_report - report error handling to user - * @ap: ATA port EH is going on + * ata_eh_autopsy - analyze error and determine recovery action + * @ap: host port to perform autopsy on + * + * Analyze all links of @ap and determine why they failed and + * which recovery actions are needed. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +void ata_eh_autopsy(struct ata_port *ap) +{ + struct ata_link *link; + + __ata_port_for_each_link(link, ap) + ata_eh_link_autopsy(link); +} + +/** + * ata_eh_link_report - report error handling to user + * @link: ATA link EH is going on * * Report EH to user. * * LOCKING: * None. */ -static void ata_eh_report(struct ata_port *ap) +static void ata_eh_link_report(struct ata_link *link) { - struct ata_eh_context *ehc = &ap->eh_context; + struct ata_port *ap = link->ap; + struct ata_eh_context *ehc = &link->eh_context; const char *frozen, *desc; + char tries_buf[6]; int tag, nr_failed = 0; + if (ehc->i.flags & ATA_EHI_QUIET) + return; + desc = NULL; if (ehc->i.desc[0] != '\0') desc = ehc->i.desc; @@ -1667,7 +1879,7 @@ static void ata_eh_report(struct ata_port *ap) for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag); - if (!(qc->flags & ATA_QCFLAG_FAILED)) + if (!(qc->flags & ATA_QCFLAG_FAILED) || qc->dev->link != link) continue; if (qc->flags & ATA_QCFLAG_SENSE_VALID && !qc->err_mask) continue; @@ -1682,22 +1894,48 @@ static void ata_eh_report(struct ata_port *ap) if (ap->pflags & ATA_PFLAG_FROZEN) frozen = " frozen"; + memset(tries_buf, 0, sizeof(tries_buf)); + if (ap->eh_tries < ATA_EH_MAX_TRIES) + snprintf(tries_buf, sizeof(tries_buf) - 1, " t%d", + ap->eh_tries); + if (ehc->i.dev) { ata_dev_printk(ehc->i.dev, KERN_ERR, "exception Emask 0x%x " - "SAct 0x%x SErr 0x%x action 0x%x%s\n", - ehc->i.err_mask, ap->sactive, ehc->i.serror, - ehc->i.action, frozen); + "SAct 0x%x SErr 0x%x action 0x%x%s%s\n", + ehc->i.err_mask, link->sactive, ehc->i.serror, + ehc->i.action, frozen, tries_buf); if (desc) ata_dev_printk(ehc->i.dev, KERN_ERR, "%s\n", desc); } else { - ata_port_printk(ap, KERN_ERR, "exception Emask 0x%x " - "SAct 0x%x SErr 0x%x action 0x%x%s\n", - ehc->i.err_mask, ap->sactive, ehc->i.serror, - ehc->i.action, frozen); + ata_link_printk(link, KERN_ERR, "exception Emask 0x%x " + "SAct 0x%x SErr 0x%x action 0x%x%s%s\n", + ehc->i.err_mask, link->sactive, ehc->i.serror, + ehc->i.action, frozen, tries_buf); if (desc) - ata_port_printk(ap, KERN_ERR, "%s\n", desc); + ata_link_printk(link, KERN_ERR, "%s\n", desc); } + if (ehc->i.serror) + ata_port_printk(ap, KERN_ERR, + "SError: { %s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s}\n", + ehc->i.serror & SERR_DATA_RECOVERED ? "RecovData " : "", + ehc->i.serror & SERR_COMM_RECOVERED ? "RecovComm " : "", + ehc->i.serror & SERR_DATA ? "UnrecovData " : "", + ehc->i.serror & SERR_PERSISTENT ? "Persist " : "", + ehc->i.serror & SERR_PROTOCOL ? "Proto " : "", + ehc->i.serror & SERR_INTERNAL ? "HostInt " : "", + ehc->i.serror & SERR_PHYRDY_CHG ? "PHYRdyChg " : "", + ehc->i.serror & SERR_PHY_INT_ERR ? "PHYInt " : "", + ehc->i.serror & SERR_COMM_WAKE ? "CommWake " : "", + ehc->i.serror & SERR_10B_8B_ERR ? "10B8B " : "", + ehc->i.serror & SERR_DISPARITY ? "Dispar " : "", + ehc->i.serror & SERR_CRC ? "BadCRC " : "", + ehc->i.serror & SERR_HANDSHAKE ? "Handshk " : "", + ehc->i.serror & SERR_LINK_SEQ_ERR ? "LinkSeq " : "", + ehc->i.serror & SERR_TRANS_ST_ERROR ? "TrStaTrns " : "", + ehc->i.serror & SERR_UNRECOG_FIS ? "UnrecFIS " : "", + ehc->i.serror & SERR_DEV_XCHG ? "DevExch " : "" ); + for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { static const char *dma_str[] = { [DMA_BIDIRECTIONAL] = "bidi", @@ -1708,7 +1946,8 @@ static void ata_eh_report(struct ata_port *ap) struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag); struct ata_taskfile *cmd = &qc->tf, *res = &qc->result_tf; - if (!(qc->flags & ATA_QCFLAG_FAILED) || !qc->err_mask) + if (!(qc->flags & ATA_QCFLAG_FAILED) || + qc->dev->link != link || !qc->err_mask) continue; ata_dev_printk(qc->dev, KERN_ERR, @@ -1728,18 +1967,60 @@ static void ata_eh_report(struct ata_port *ap) res->hob_lbal, res->hob_lbam, res->hob_lbah, res->device, qc->err_mask, ata_err_string(qc->err_mask), qc->err_mask & AC_ERR_NCQ ? " <F>" : ""); + + if (res->command & (ATA_BUSY | ATA_DRDY | ATA_DF | ATA_DRQ | + ATA_ERR) ) { + if (res->command & ATA_BUSY) + ata_dev_printk(qc->dev, KERN_ERR, + "status: { Busy }\n" ); + else + ata_dev_printk(qc->dev, KERN_ERR, + "status: { %s%s%s%s}\n", + res->command & ATA_DRDY ? "DRDY " : "", + res->command & ATA_DF ? "DF " : "", + res->command & ATA_DRQ ? "DRQ " : "", + res->command & ATA_ERR ? "ERR " : "" ); + } + + if (cmd->command != ATA_CMD_PACKET && + (res->feature & (ATA_ICRC | ATA_UNC | ATA_IDNF | + ATA_ABORTED))) + ata_dev_printk(qc->dev, KERN_ERR, + "error: { %s%s%s%s}\n", + res->feature & ATA_ICRC ? "ICRC " : "", + res->feature & ATA_UNC ? "UNC " : "", + res->feature & ATA_IDNF ? "IDNF " : "", + res->feature & ATA_ABORTED ? "ABRT " : "" ); } } -static int ata_do_reset(struct ata_port *ap, ata_reset_fn_t reset, +/** + * ata_eh_report - report error handling to user + * @ap: ATA port to report EH about + * + * Report EH to user. + * + * LOCKING: + * None. + */ +void ata_eh_report(struct ata_port *ap) +{ + struct ata_link *link; + + __ata_port_for_each_link(link, ap) + ata_eh_link_report(link); +} + +static int ata_do_reset(struct ata_link *link, ata_reset_fn_t reset, unsigned int *classes, unsigned long deadline) { - int i, rc; + struct ata_device *dev; + int rc; - for (i = 0; i < ATA_MAX_DEVICES; i++) - classes[i] = ATA_DEV_UNKNOWN; + ata_link_for_each_dev(dev, link) + classes[dev->devno] = ATA_DEV_UNKNOWN; - rc = reset(ap, classes, deadline); + rc = reset(link, classes, deadline); if (rc) return rc; @@ -1747,71 +2028,87 @@ static int ata_do_reset(struct ata_port *ap, ata_reset_fn_t reset, * is complete and convert all ATA_DEV_UNKNOWN to * ATA_DEV_NONE. */ - for (i = 0; i < ATA_MAX_DEVICES; i++) - if (classes[i] != ATA_DEV_UNKNOWN) + ata_link_for_each_dev(dev, link) + if (classes[dev->devno] != ATA_DEV_UNKNOWN) break; - if (i < ATA_MAX_DEVICES) - for (i = 0; i < ATA_MAX_DEVICES; i++) - if (classes[i] == ATA_DEV_UNKNOWN) - classes[i] = ATA_DEV_NONE; + if (dev) { + ata_link_for_each_dev(dev, link) { + if (classes[dev->devno] == ATA_DEV_UNKNOWN) + classes[dev->devno] = ATA_DEV_NONE; + } + } return 0; } -static int ata_eh_followup_srst_needed(int rc, int classify, +static int ata_eh_followup_srst_needed(struct ata_link *link, + int rc, int classify, const unsigned int *classes) { + if (link->flags & ATA_LFLAG_NO_SRST) + return 0; if (rc == -EAGAIN) return 1; if (rc != 0) return 0; - if (classify && classes[0] == ATA_DEV_UNKNOWN) + if ((link->ap->flags & ATA_FLAG_PMP) && ata_is_host_link(link)) + return 1; + if (classify && !(link->flags & ATA_LFLAG_ASSUME_CLASS) && + classes[0] == ATA_DEV_UNKNOWN) return 1; return 0; } -static int ata_eh_reset(struct ata_port *ap, int classify, - ata_prereset_fn_t prereset, ata_reset_fn_t softreset, - ata_reset_fn_t hardreset, ata_postreset_fn_t postreset) +int ata_eh_reset(struct ata_link *link, int classify, + ata_prereset_fn_t prereset, ata_reset_fn_t softreset, + ata_reset_fn_t hardreset, ata_postreset_fn_t postreset) { - struct ata_eh_context *ehc = &ap->eh_context; + struct ata_port *ap = link->ap; + struct ata_eh_context *ehc = &link->eh_context; unsigned int *classes = ehc->classes; int verbose = !(ehc->i.flags & ATA_EHI_QUIET); int try = 0; + struct ata_device *dev; unsigned long deadline; unsigned int action; ata_reset_fn_t reset; - int i, rc; + unsigned long flags; + int rc; /* about to reset */ - ata_eh_about_to_do(ap, NULL, ehc->i.action & ATA_EH_RESET_MASK); + spin_lock_irqsave(ap->lock, flags); + ap->pflags |= ATA_PFLAG_RESETTING; + spin_unlock_irqrestore(ap->lock, flags); + + ata_eh_about_to_do(link, NULL, ehc->i.action & ATA_EH_RESET_MASK); /* Determine which reset to use and record in ehc->i.action. * prereset() may examine and modify it. */ action = ehc->i.action; ehc->i.action &= ~ATA_EH_RESET_MASK; - if (softreset && (!hardreset || (!sata_set_spd_needed(ap) && + if (softreset && (!hardreset || (!(link->flags & ATA_LFLAG_NO_SRST) && + !sata_set_spd_needed(link) && !(action & ATA_EH_HARDRESET)))) ehc->i.action |= ATA_EH_SOFTRESET; else ehc->i.action |= ATA_EH_HARDRESET; if (prereset) { - rc = prereset(ap, jiffies + ATA_EH_PRERESET_TIMEOUT); + rc = prereset(link, jiffies + ATA_EH_PRERESET_TIMEOUT); if (rc) { if (rc == -ENOENT) { - ata_port_printk(ap, KERN_DEBUG, + ata_link_printk(link, KERN_DEBUG, "port disabled. ignoring.\n"); - ap->eh_context.i.action &= ~ATA_EH_RESET_MASK; + ehc->i.action &= ~ATA_EH_RESET_MASK; - for (i = 0; i < ATA_MAX_DEVICES; i++) - classes[i] = ATA_DEV_NONE; + ata_link_for_each_dev(dev, link) + classes[dev->devno] = ATA_DEV_NONE; rc = 0; } else - ata_port_printk(ap, KERN_ERR, + ata_link_printk(link, KERN_ERR, "prereset failed (errno=%d)\n", rc); goto out; } @@ -1824,8 +2121,8 @@ static int ata_eh_reset(struct ata_port *ap, int classify, reset = softreset; else { /* prereset told us not to reset, bang classes and return */ - for (i = 0; i < ATA_MAX_DEVICES; i++) - classes[i] = ATA_DEV_NONE; + ata_link_for_each_dev(dev, link) + classes[dev->devno] = ATA_DEV_NONE; rc = 0; goto out; } @@ -1843,7 +2140,7 @@ static int ata_eh_reset(struct ata_port *ap, int classify, /* shut up during boot probing */ if (verbose) - ata_port_printk(ap, KERN_INFO, "%s resetting port\n", + ata_link_printk(link, KERN_INFO, "%s resetting link\n", reset == softreset ? "soft" : "hard"); /* mark that this EH session started with reset */ @@ -1852,49 +2149,54 @@ static int ata_eh_reset(struct ata_port *ap, int classify, else ehc->i.flags |= ATA_EHI_DID_SOFTRESET; - rc = ata_do_reset(ap, reset, classes, deadline); + rc = ata_do_reset(link, reset, classes, deadline); if (reset == hardreset && - ata_eh_followup_srst_needed(rc, classify, classes)) { + ata_eh_followup_srst_needed(link, rc, classify, classes)) { /* okay, let's do follow-up softreset */ reset = softreset; if (!reset) { - ata_port_printk(ap, KERN_ERR, + ata_link_printk(link, KERN_ERR, "follow-up softreset required " "but no softreset avaliable\n"); rc = -EINVAL; goto out; } - ata_eh_about_to_do(ap, NULL, ATA_EH_RESET_MASK); - rc = ata_do_reset(ap, reset, classes, deadline); + ata_eh_about_to_do(link, NULL, ATA_EH_RESET_MASK); + rc = ata_do_reset(link, reset, classes, deadline); - if (rc == 0 && classify && - classes[0] == ATA_DEV_UNKNOWN) { - ata_port_printk(ap, KERN_ERR, + if (rc == 0 && classify && classes[0] == ATA_DEV_UNKNOWN && + !(link->flags & ATA_LFLAG_ASSUME_CLASS)) { + ata_link_printk(link, KERN_ERR, "classification failed\n"); rc = -EINVAL; goto out; } } - if (rc && try < ARRAY_SIZE(ata_eh_reset_timeouts)) { + /* if we skipped follow-up srst, clear rc */ + if (rc == -EAGAIN) + rc = 0; + + if (rc && rc != -ERESTART && try < ARRAY_SIZE(ata_eh_reset_timeouts)) { unsigned long now = jiffies; if (time_before(now, deadline)) { unsigned long delta = deadline - jiffies; - ata_port_printk(ap, KERN_WARNING, "reset failed " + ata_link_printk(link, KERN_WARNING, "reset failed " "(errno=%d), retrying in %u secs\n", rc, (jiffies_to_msecs(delta) + 999) / 1000); - schedule_timeout_uninterruptible(delta); + while (delta) + delta = schedule_timeout_uninterruptible(delta); } if (rc == -EPIPE || try == ARRAY_SIZE(ata_eh_reset_timeouts) - 1) - sata_down_spd_limit(ap); + sata_down_spd_limit(link); if (hardreset) reset = hardreset; goto retry; @@ -1903,37 +2205,56 @@ static int ata_eh_reset(struct ata_port *ap, int classify, if (rc == 0) { u32 sstatus; - /* After the reset, the device state is PIO 0 and the - * controller state is undefined. Record the mode. - */ - for (i = 0; i < ATA_MAX_DEVICES; i++) - ap->device[i].pio_mode = XFER_PIO_0; + ata_link_for_each_dev(dev, link) { + /* After the reset, the device state is PIO 0 + * and the controller state is undefined. + * Record the mode. + */ + dev->pio_mode = XFER_PIO_0; + + if (ata_link_offline(link)) + continue; + + /* apply class override and convert UNKNOWN to NONE */ + if (link->flags & ATA_LFLAG_ASSUME_ATA) + classes[dev->devno] = ATA_DEV_ATA; + else if (link->flags & ATA_LFLAG_ASSUME_SEMB) + classes[dev->devno] = ATA_DEV_SEMB_UNSUP; /* not yet */ + else if (classes[dev->devno] == ATA_DEV_UNKNOWN) + classes[dev->devno] = ATA_DEV_NONE; + } /* record current link speed */ - if (sata_scr_read(ap, SCR_STATUS, &sstatus) == 0) - ap->sata_spd = (sstatus >> 4) & 0xf; + if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0) + link->sata_spd = (sstatus >> 4) & 0xf; if (postreset) - postreset(ap, classes); + postreset(link, classes); /* reset successful, schedule revalidation */ - ata_eh_done(ap, NULL, ehc->i.action & ATA_EH_RESET_MASK); + ata_eh_done(link, NULL, ehc->i.action & ATA_EH_RESET_MASK); ehc->i.action |= ATA_EH_REVALIDATE; } out: /* clear hotplug flag */ ehc->i.flags &= ~ATA_EHI_HOTPLUGGED; + + spin_lock_irqsave(ap->lock, flags); + ap->pflags &= ~ATA_PFLAG_RESETTING; + spin_unlock_irqrestore(ap->lock, flags); + return rc; } -static int ata_eh_revalidate_and_attach(struct ata_port *ap, +static int ata_eh_revalidate_and_attach(struct ata_link *link, struct ata_device **r_failed_dev) { - struct ata_eh_context *ehc = &ap->eh_context; + struct ata_port *ap = link->ap; + struct ata_eh_context *ehc = &link->eh_context; struct ata_device *dev; unsigned int new_mask = 0; unsigned long flags; - int i, rc = 0; + int rc = 0; DPRINTK("ENTER\n"); @@ -1941,27 +2262,28 @@ static int ata_eh_revalidate_and_attach(struct ata_port *ap, * be done backwards such that PDIAG- is released by the slave * device before the master device is identified. */ - for (i = ATA_MAX_DEVICES - 1; i >= 0; i--) { - unsigned int action, readid_flags = 0; - - dev = &ap->device[i]; - action = ata_eh_dev_action(dev); + ata_link_for_each_dev_reverse(dev, link) { + unsigned int action = ata_eh_dev_action(dev); + unsigned int readid_flags = 0; if (ehc->i.flags & ATA_EHI_DID_RESET) readid_flags |= ATA_READID_POSTRESET; if ((action & ATA_EH_REVALIDATE) && ata_dev_enabled(dev)) { - if (ata_port_offline(ap)) { + WARN_ON(dev->class == ATA_DEV_PMP); + + if (ata_link_offline(link)) { rc = -EIO; goto err; } - ata_eh_about_to_do(ap, dev, ATA_EH_REVALIDATE); - rc = ata_dev_revalidate(dev, readid_flags); + ata_eh_about_to_do(link, dev, ATA_EH_REVALIDATE); + rc = ata_dev_revalidate(dev, ehc->classes[dev->devno], + readid_flags); if (rc) goto err; - ata_eh_done(ap, dev, ATA_EH_REVALIDATE); + ata_eh_done(link, dev, ATA_EH_REVALIDATE); /* Configuration may have changed, reconfigure * transfer mode. @@ -1975,11 +2297,14 @@ static int ata_eh_revalidate_and_attach(struct ata_port *ap, ata_class_enabled(ehc->classes[dev->devno])) { dev->class = ehc->classes[dev->devno]; - rc = ata_dev_read_id(dev, &dev->class, readid_flags, - dev->id); + if (dev->class == ATA_DEV_PMP) + rc = sata_pmp_attach(dev); + else + rc = ata_dev_read_id(dev, &dev->class, + readid_flags, dev->id); switch (rc) { case 0: - new_mask |= 1 << i; + new_mask |= 1 << dev->devno; break; case -ENOENT: /* IDENTIFY was issued to non-existent @@ -1997,16 +2322,16 @@ static int ata_eh_revalidate_and_attach(struct ata_port *ap, } /* PDIAG- should have been released, ask cable type if post-reset */ - if ((ehc->i.flags & ATA_EHI_DID_RESET) && ap->ops->cable_detect) + if (ata_is_host_link(link) && ap->ops->cable_detect && + (ehc->i.flags & ATA_EHI_DID_RESET)) ap->cbl = ap->ops->cable_detect(ap); /* Configure new devices forward such that user doesn't see * device detection messages backwards. */ - for (i = 0; i < ATA_MAX_DEVICES; i++) { - dev = &ap->device[i]; - - if (!(new_mask & (1 << i))) + ata_link_for_each_dev(dev, link) { + if (!(new_mask & (1 << dev->devno)) || + dev->class == ATA_DEV_PMP) continue; ehc->i.flags |= ATA_EHI_PRINTINFO; @@ -2031,40 +2356,44 @@ static int ata_eh_revalidate_and_attach(struct ata_port *ap, return rc; } -static int ata_port_nr_enabled(struct ata_port *ap) +static int ata_link_nr_enabled(struct ata_link *link) { - int i, cnt = 0; + struct ata_device *dev; + int cnt = 0; - for (i = 0; i < ATA_MAX_DEVICES; i++) - if (ata_dev_enabled(&ap->device[i])) + ata_link_for_each_dev(dev, link) + if (ata_dev_enabled(dev)) cnt++; return cnt; } -static int ata_port_nr_vacant(struct ata_port *ap) +static int ata_link_nr_vacant(struct ata_link *link) { - int i, cnt = 0; + struct ata_device *dev; + int cnt = 0; - for (i = 0; i < ATA_MAX_DEVICES; i++) - if (ap->device[i].class == ATA_DEV_UNKNOWN) + ata_link_for_each_dev(dev, link) + if (dev->class == ATA_DEV_UNKNOWN) cnt++; return cnt; } -static int ata_eh_skip_recovery(struct ata_port *ap) +static int ata_eh_skip_recovery(struct ata_link *link) { - struct ata_eh_context *ehc = &ap->eh_context; - int i; + struct ata_eh_context *ehc = &link->eh_context; + struct ata_device *dev; + + /* skip disabled links */ + if (link->flags & ATA_LFLAG_DISABLED) + return 1; /* thaw frozen port, resume link and recover failed devices */ - if ((ap->pflags & ATA_PFLAG_FROZEN) || - (ehc->i.flags & ATA_EHI_RESUME_LINK) || ata_port_nr_enabled(ap)) + if ((link->ap->pflags & ATA_PFLAG_FROZEN) || + (ehc->i.flags & ATA_EHI_RESUME_LINK) || ata_link_nr_enabled(link)) return 0; /* skip if class codes for all vacant slots are ATA_DEV_NONE */ - for (i = 0; i < ATA_MAX_DEVICES; i++) { - struct ata_device *dev = &ap->device[i]; - + ata_link_for_each_dev(dev, link) { if (dev->class == ATA_DEV_UNKNOWN && ehc->classes[dev->devno] != ATA_DEV_NONE) return 0; @@ -2073,10 +2402,9 @@ static int ata_eh_skip_recovery(struct ata_port *ap) return 1; } -static void ata_eh_handle_dev_fail(struct ata_device *dev, int err) +static int ata_eh_handle_dev_fail(struct ata_device *dev, int err) { - struct ata_port *ap = dev->ap; - struct ata_eh_context *ehc = &ap->eh_context; + struct ata_eh_context *ehc = &dev->link->eh_context; ehc->tries[dev->devno]--; @@ -2092,7 +2420,7 @@ static void ata_eh_handle_dev_fail(struct ata_device *dev, int err) /* This is the last chance, better to slow * down than lose it. */ - sata_down_spd_limit(ap); + sata_down_spd_limit(dev->link); ata_down_xfermask_limit(dev, ATA_DNXFER_PIO); } } @@ -2102,7 +2430,7 @@ static void ata_eh_handle_dev_fail(struct ata_device *dev, int err) ata_dev_disable(dev); /* detach if offline */ - if (ata_port_offline(ap)) + if (ata_link_offline(dev->link)) ata_eh_detach_dev(dev); /* probe if requested */ @@ -2115,12 +2443,16 @@ static void ata_eh_handle_dev_fail(struct ata_device *dev, int err) ehc->did_probe_mask |= (1 << dev->devno); ehc->i.action |= ATA_EH_SOFTRESET; } + + return 1; } else { /* soft didn't work? be haaaaard */ if (ehc->i.flags & ATA_EHI_DID_RESET) ehc->i.action |= ATA_EH_HARDRESET; else ehc->i.action |= ATA_EH_SOFTRESET; + + return 0; } } @@ -2131,12 +2463,13 @@ static void ata_eh_handle_dev_fail(struct ata_device *dev, int err) * @softreset: softreset method (can be NULL) * @hardreset: hardreset method (can be NULL) * @postreset: postreset method (can be NULL) + * @r_failed_link: out parameter for failed link * * This is the alpha and omega, eum and yang, heart and soul of * libata exception handling. On entry, actions required to - * recover the port and hotplug requests are recorded in - * eh_context. This function executes all the operations with - * appropriate retrials and fallbacks to resurrect failed + * recover each link and hotplug requests are recorded in the + * link's eh_context. This function executes all the operations + * with appropriate retrials and fallbacks to resurrect failed * devices, detach goners and greet newcomers. * * LOCKING: @@ -2145,104 +2478,171 @@ static void ata_eh_handle_dev_fail(struct ata_device *dev, int err) * RETURNS: * 0 on success, -errno on failure. */ -static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, - ata_reset_fn_t softreset, ata_reset_fn_t hardreset, - ata_postreset_fn_t postreset) +int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, + ata_reset_fn_t softreset, ata_reset_fn_t hardreset, + ata_postreset_fn_t postreset, + struct ata_link **r_failed_link) { - struct ata_eh_context *ehc = &ap->eh_context; + struct ata_link *link; struct ata_device *dev; - int i, rc; + int nr_failed_devs, nr_disabled_devs; + int reset, rc; + unsigned long flags; DPRINTK("ENTER\n"); /* prep for recovery */ - for (i = 0; i < ATA_MAX_DEVICES; i++) { - dev = &ap->device[i]; - - ehc->tries[dev->devno] = ATA_EH_DEV_TRIES; - - /* collect port action mask recorded in dev actions */ - ehc->i.action |= ehc->i.dev_action[i] & ~ATA_EH_PERDEV_MASK; - ehc->i.dev_action[i] &= ATA_EH_PERDEV_MASK; - - /* process hotplug request */ - if (dev->flags & ATA_DFLAG_DETACH) - ata_eh_detach_dev(dev); + ata_port_for_each_link(link, ap) { + struct ata_eh_context *ehc = &link->eh_context; + + /* re-enable link? */ + if (ehc->i.action & ATA_EH_ENABLE_LINK) { + ata_eh_about_to_do(link, NULL, ATA_EH_ENABLE_LINK); + spin_lock_irqsave(ap->lock, flags); + link->flags &= ~ATA_LFLAG_DISABLED; + spin_unlock_irqrestore(ap->lock, flags); + ata_eh_done(link, NULL, ATA_EH_ENABLE_LINK); + } - if (!ata_dev_enabled(dev) && - ((ehc->i.probe_mask & (1 << dev->devno)) && - !(ehc->did_probe_mask & (1 << dev->devno)))) { - ata_eh_detach_dev(dev); - ata_dev_init(dev); - ehc->did_probe_mask |= (1 << dev->devno); - ehc->i.action |= ATA_EH_SOFTRESET; + ata_link_for_each_dev(dev, link) { + if (link->flags & ATA_LFLAG_NO_RETRY) + ehc->tries[dev->devno] = 1; + else + ehc->tries[dev->devno] = ATA_EH_DEV_TRIES; + + /* collect port action mask recorded in dev actions */ + ehc->i.action |= ehc->i.dev_action[dev->devno] & + ~ATA_EH_PERDEV_MASK; + ehc->i.dev_action[dev->devno] &= ATA_EH_PERDEV_MASK; + + /* process hotplug request */ + if (dev->flags & ATA_DFLAG_DETACH) + ata_eh_detach_dev(dev); + + if (!ata_dev_enabled(dev) && + ((ehc->i.probe_mask & (1 << dev->devno)) && + !(ehc->did_probe_mask & (1 << dev->devno)))) { + ata_eh_detach_dev(dev); + ata_dev_init(dev); + ehc->did_probe_mask |= (1 << dev->devno); + ehc->i.action |= ATA_EH_SOFTRESET; + } } } retry: rc = 0; + nr_failed_devs = 0; + nr_disabled_devs = 0; + reset = 0; /* if UNLOADING, finish immediately */ if (ap->pflags & ATA_PFLAG_UNLOADING) goto out; - /* skip EH if possible. */ - if (ata_eh_skip_recovery(ap)) - ehc->i.action = 0; + /* prep for EH */ + ata_port_for_each_link(link, ap) { + struct ata_eh_context *ehc = &link->eh_context; - for (i = 0; i < ATA_MAX_DEVICES; i++) - ehc->classes[i] = ATA_DEV_UNKNOWN; + /* skip EH if possible. */ + if (ata_eh_skip_recovery(link)) + ehc->i.action = 0; - /* reset */ - if (ehc->i.action & ATA_EH_RESET_MASK) { - ata_eh_freeze_port(ap); + /* do we need to reset? */ + if (ehc->i.action & ATA_EH_RESET_MASK) + reset = 1; - rc = ata_eh_reset(ap, ata_port_nr_vacant(ap), prereset, - softreset, hardreset, postreset); - if (rc) { - ata_port_printk(ap, KERN_ERR, - "reset failed, giving up\n"); - goto out; + ata_link_for_each_dev(dev, link) + ehc->classes[dev->devno] = ATA_DEV_UNKNOWN; + } + + /* reset */ + if (reset) { + /* if PMP is attached, this function only deals with + * downstream links, port should stay thawed. + */ + if (!ap->nr_pmp_links) + ata_eh_freeze_port(ap); + + ata_port_for_each_link(link, ap) { + struct ata_eh_context *ehc = &link->eh_context; + + if (!(ehc->i.action & ATA_EH_RESET_MASK)) + continue; + + rc = ata_eh_reset(link, ata_link_nr_vacant(link), + prereset, softreset, hardreset, + postreset); + if (rc) { + ata_link_printk(link, KERN_ERR, + "reset failed, giving up\n"); + goto out; + } } - ata_eh_thaw_port(ap); + if (!ap->nr_pmp_links) + ata_eh_thaw_port(ap); } - /* revalidate existing devices and attach new ones */ - rc = ata_eh_revalidate_and_attach(ap, &dev); - if (rc) - goto dev_fail; + /* the rest */ + ata_port_for_each_link(link, ap) { + struct ata_eh_context *ehc = &link->eh_context; - /* configure transfer mode if necessary */ - if (ehc->i.flags & ATA_EHI_SETMODE) { - rc = ata_set_mode(ap, &dev); + /* revalidate existing devices and attach new ones */ + rc = ata_eh_revalidate_and_attach(link, &dev); if (rc) goto dev_fail; - ehc->i.flags &= ~ATA_EHI_SETMODE; - } - goto out; + /* if PMP got attached, return, pmp EH will take care of it */ + if (link->device->class == ATA_DEV_PMP) { + ehc->i.action = 0; + return 0; + } - dev_fail: - ata_eh_handle_dev_fail(dev, rc); + /* configure transfer mode if necessary */ + if (ehc->i.flags & ATA_EHI_SETMODE) { + rc = ata_set_mode(link, &dev); + if (rc) + goto dev_fail; + ehc->i.flags &= ~ATA_EHI_SETMODE; + } - if (ata_port_nr_enabled(ap)) { - ata_port_printk(ap, KERN_WARNING, "failed to recover some " - "devices, retrying in 5 secs\n"); - ssleep(5); - } else { - /* no device left, repeat fast */ - msleep(500); + /* this link is okay now */ + ehc->i.flags = 0; + continue; + + dev_fail: + nr_failed_devs++; + if (ata_eh_handle_dev_fail(dev, rc)) + nr_disabled_devs++; + + if (ap->pflags & ATA_PFLAG_FROZEN) { + /* PMP reset requires working host port. + * Can't retry if it's frozen. + */ + if (ap->nr_pmp_links) + goto out; + break; + } } - goto retry; + if (nr_failed_devs) { + if (nr_failed_devs != nr_disabled_devs) { + ata_port_printk(ap, KERN_WARNING, "failed to recover " + "some devices, retrying in 5 secs\n"); + ssleep(5); + } else { + /* no device left to recover, repeat fast */ + msleep(500); + } - out: - if (rc) { - for (i = 0; i < ATA_MAX_DEVICES; i++) - ata_dev_disable(&ap->device[i]); + goto retry; } + out: + if (rc && r_failed_link) + *r_failed_link = link; + DPRINTK("EXIT, rc=%d\n", rc); return rc; } @@ -2257,7 +2657,7 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, * LOCKING: * None. */ -static void ata_eh_finish(struct ata_port *ap) +void ata_eh_finish(struct ata_port *ap) { int tag; @@ -2287,6 +2687,10 @@ static void ata_eh_finish(struct ata_port *ap) } } } + + /* make sure nr_active_links is zero after EH */ + WARN_ON(ap->nr_active_links); + ap->nr_active_links = 0; } /** @@ -2306,9 +2710,19 @@ void ata_do_eh(struct ata_port *ap, ata_prereset_fn_t prereset, ata_reset_fn_t softreset, ata_reset_fn_t hardreset, ata_postreset_fn_t postreset) { + struct ata_device *dev; + int rc; + ata_eh_autopsy(ap); ata_eh_report(ap); - ata_eh_recover(ap, prereset, softreset, hardreset, postreset); + + rc = ata_eh_recover(ap, prereset, softreset, hardreset, postreset, + NULL); + if (rc) { + ata_link_for_each_dev(dev, &ap->link) + ata_dev_disable(dev); + } + ata_eh_finish(ap); } diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c new file mode 100644 index 0000000..c0c4dbc --- /dev/null +++ b/drivers/ata/libata-pmp.c @@ -0,0 +1,1191 @@ +/* + * libata-pmp.c - libata port multiplier support + * + * Copyright (c) 2007 SUSE Linux Products GmbH + * Copyright (c) 2007 Tejun Heo <teheo@suse.de> + * + * This file is released under the GPLv2. + */ + +#include <linux/kernel.h> +#include <linux/libata.h> +#include "libata.h" + +/** + * sata_pmp_read - read PMP register + * @link: link to read PMP register for + * @reg: register to read + * @r_val: resulting value + * + * Read PMP register. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, AC_ERR_* mask on failure. + */ +static unsigned int sata_pmp_read(struct ata_link *link, int reg, u32 *r_val) +{ + struct ata_port *ap = link->ap; + struct ata_device *pmp_dev = ap->link.device; + struct ata_taskfile tf; + unsigned int err_mask; + + ata_tf_init(pmp_dev, &tf); + tf.command = ATA_CMD_PMP_READ; + tf.protocol = ATA_PROT_NODATA; + tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + tf.feature = reg; + tf.device = link->pmp; + + err_mask = ata_exec_internal(pmp_dev, &tf, NULL, DMA_NONE, NULL, 0, + SATA_PMP_SCR_TIMEOUT); + if (err_mask) + return err_mask; + + *r_val = tf.nsect | tf.lbal << 8 | tf.lbam << 16 | tf.lbah << 24; + return 0; +} + +/** + * sata_pmp_write - write PMP register + * @link: link to write PMP register for + * @reg: register to write + * @r_val: value to write + * + * Write PMP register. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, AC_ERR_* mask on failure. + */ +static unsigned int sata_pmp_write(struct ata_link *link, int reg, u32 val) +{ + struct ata_port *ap = link->ap; + struct ata_device *pmp_dev = ap->link.device; + struct ata_taskfile tf; + + ata_tf_init(pmp_dev, &tf); + tf.command = ATA_CMD_PMP_WRITE; + tf.protocol = ATA_PROT_NODATA; + tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + tf.feature = reg; + tf.device = link->pmp; + tf.nsect = val & 0xff; + tf.lbal = (val >> 8) & 0xff; + tf.lbam = (val >> 16) & 0xff; + tf.lbah = (val >> 24) & 0xff; + + return ata_exec_internal(pmp_dev, &tf, NULL, DMA_NONE, NULL, 0, + SATA_PMP_SCR_TIMEOUT); +} + +/** + * sata_pmp_qc_defer_cmd_switch - qc_defer for command switching PMP + * @qc: ATA command in question + * + * A host which has command switching PMP support cannot issue + * commands to multiple links simultaneously. + * + * LOCKING: + * spin_lock_irqsave(host lock) + * + * RETURNS: + * ATA_DEFER_* if deferring is needed, 0 otherwise. + */ +int sata_pmp_qc_defer_cmd_switch(struct ata_queued_cmd *qc) +{ + struct ata_link *link = qc->dev->link; + struct ata_port *ap = link->ap; + + if (ap->excl_link == NULL || ap->excl_link == link) { + if (ap->nr_active_links == 0 || ata_link_active(link)) { + qc->flags |= ATA_QCFLAG_CLEAR_EXCL; + return ata_std_qc_defer(qc); + } + + ap->excl_link = link; + } + + return ATA_DEFER_PORT; +} + +/** + * sata_pmp_scr_read - read PSCR + * @link: ATA link to read PSCR for + * @reg: PSCR to read + * @r_val: resulting value + * + * Read PSCR @reg into @r_val for @link, to be called from + * ata_scr_read(). + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, -errno on failure. + */ +int sata_pmp_scr_read(struct ata_link *link, int reg, u32 *r_val) +{ + unsigned int err_mask; + + if (reg > SATA_PMP_PSCR_CONTROL) + return -EINVAL; + + err_mask = sata_pmp_read(link, reg, r_val); + if (err_mask) { + ata_link_printk(link, KERN_WARNING, "failed to read SCR %d " + "(Emask=0x%x)\n", reg, err_mask); + return -EIO; + } + return 0; +} + +/** + * sata_pmp_scr_write - write PSCR + * @link: ATA link to write PSCR for + * @reg: PSCR to write + * @val: value to be written + * + * Write @val to PSCR @reg for @link, to be called from + * ata_scr_write() and ata_scr_write_flush(). + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, -errno on failure. + */ +int sata_pmp_scr_write(struct ata_link *link, int reg, u32 val) +{ + unsigned int err_mask; + + if (reg > SATA_PMP_PSCR_CONTROL) + return -EINVAL; + + err_mask = sata_pmp_write(link, reg, val); + if (err_mask) { + ata_link_printk(link, KERN_WARNING, "failed to write SCR %d " + "(Emask=0x%x)\n", reg, err_mask); + return -EIO; + } + return 0; +} + +/** + * sata_pmp_std_prereset - prepare PMP link for reset + * @link: link to be reset + * @deadline: deadline jiffies for the operation + * + * @link is about to be reset. Initialize it. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +int sata_pmp_std_prereset(struct ata_link *link, unsigned long deadline) +{ + struct ata_eh_context *ehc = &link->eh_context; + const unsigned long *timing = sata_ehc_deb_timing(ehc); + int rc; + + /* force HRST? */ + if (link->flags & ATA_LFLAG_NO_SRST) + ehc->i.action |= ATA_EH_HARDRESET; + + /* handle link resume */ + if ((ehc->i.flags & ATA_EHI_RESUME_LINK) && + (link->flags & ATA_LFLAG_HRST_TO_RESUME)) + ehc->i.action |= ATA_EH_HARDRESET; + + /* if we're about to do hardreset, nothing more to do */ + if (ehc->i.action & ATA_EH_HARDRESET) + return 0; + + /* resume link */ + rc = sata_link_resume(link, timing, deadline); + if (rc) { + /* phy resume failed */ + ata_link_printk(link, KERN_WARNING, "failed to resume link " + "for reset (errno=%d)\n", rc); + return rc; + } + + /* clear SError bits including .X which blocks the port when set */ + rc = sata_scr_write(link, SCR_ERROR, 0xffffffff); + if (rc) { + ata_link_printk(link, KERN_ERR, + "failed to clear SError (errno=%d)\n", rc); + return rc; + } + + return 0; +} + +/** + * sata_pmp_std_hardreset - standard hardreset method for PMP link + * @link: link to be reset + * @class: resulting class of attached device + * @deadline: deadline jiffies for the operation + * + * Hardreset PMP port @link. Note that this function doesn't + * wait for BSY clearance. There simply isn't a generic way to + * wait the event. Instead, this function return -EAGAIN thus + * telling libata-EH to followup with softreset. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +int sata_pmp_std_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context); + u32 tmp; + int rc; + + DPRINTK("ENTER\n"); + + /* do hardreset */ + rc = sata_link_hardreset(link, timing, deadline); + if (rc) { + ata_link_printk(link, KERN_ERR, + "COMRESET failed (errno=%d)\n", rc); + goto out; + } + + /* clear SError bits including .X which blocks the port when set */ + rc = sata_scr_write(link, SCR_ERROR, 0xffffffff); + if (rc) { + ata_link_printk(link, KERN_ERR, "failed to clear SError " + "during hardreset (errno=%d)\n", rc); + goto out; + } + + /* if device is present, follow up with srst to wait for !BSY */ + if (ata_link_online(link)) + rc = -EAGAIN; + out: + /* if SCR isn't accessible, we need to reset the PMP */ + if (rc && rc != -EAGAIN && sata_scr_read(link, SCR_STATUS, &tmp)) + rc = -ERESTART; + + DPRINTK("EXIT, rc=%d\n", rc); + return rc; +} + +/** + * ata_std_postreset - standard postreset method for PMP link + * @link: the target ata_link + * @classes: classes of attached devices + * + * This function is invoked after a successful reset. Note that + * the device might have been reset more than once using + * different reset methods before postreset is invoked. + * + * LOCKING: + * Kernel thread context (may sleep) + */ +void sata_pmp_std_postreset(struct ata_link *link, unsigned int *class) +{ + u32 serror; + + DPRINTK("ENTER\n"); + + /* clear SError */ + if (sata_scr_read(link, SCR_ERROR, &serror) == 0) + sata_scr_write(link, SCR_ERROR, serror); + + /* print link status */ + sata_print_link_status(link); + + DPRINTK("EXIT\n"); +} + +/** + * sata_pmp_read_gscr - read GSCR block of SATA PMP + * @dev: PMP device + * @gscr: buffer to read GSCR block into + * + * Read selected PMP GSCRs from the PMP at @dev. This will serve + * as configuration and identification info for the PMP. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, -errno on failure. + */ +static int sata_pmp_read_gscr(struct ata_device *dev, u32 *gscr) +{ + static const int gscr_to_read[] = { 0, 1, 2, 32, 33, 64, 96 }; + int i; + + for (i = 0; i < ARRAY_SIZE(gscr_to_read); i++) { + int reg = gscr_to_read[i]; + unsigned int err_mask; + + err_mask = sata_pmp_read(dev->link, reg, &gscr[reg]); + if (err_mask) { + ata_dev_printk(dev, KERN_ERR, "failed to read PMP " + "GSCR[%d] (Emask=0x%x)\n", reg, err_mask); + return -EIO; + } + } + + return 0; +} + +static const char *sata_pmp_spec_rev_str(const u32 *gscr) +{ + u32 rev = gscr[SATA_PMP_GSCR_REV]; + + if (rev & (1 << 2)) + return "1.1"; + if (rev & (1 << 1)) + return "1.0"; + return "<unknown>"; +} + +static int sata_pmp_configure(struct ata_device *dev, int print_info) +{ + struct ata_port *ap = dev->link->ap; + u32 *gscr = dev->gscr; + unsigned int err_mask = 0; + const char *reason; + int nr_ports, rc; + + nr_ports = sata_pmp_gscr_ports(gscr); + + if (nr_ports <= 0 || nr_ports > SATA_PMP_MAX_PORTS) { + rc = -EINVAL; + reason = "invalid nr_ports"; + goto fail; + } + + if ((ap->flags & ATA_FLAG_AN) && + (gscr[SATA_PMP_GSCR_FEAT] & SATA_PMP_FEAT_NOTIFY)) + dev->flags |= ATA_DFLAG_AN; + + /* monitor SERR_PHYRDY_CHG on fan-out ports */ + err_mask = sata_pmp_write(dev->link, SATA_PMP_GSCR_ERROR_EN, + SERR_PHYRDY_CHG); + if (err_mask) { + rc = -EIO; + reason = "failed to write GSCR_ERROR_EN"; + goto fail; + } + + /* turn off notification till fan-out ports are reset and configured */ + if (gscr[SATA_PMP_GSCR_FEAT_EN] & SATA_PMP_FEAT_NOTIFY) { + gscr[SATA_PMP_GSCR_FEAT_EN] &= ~SATA_PMP_FEAT_NOTIFY; + + err_mask = sata_pmp_write(dev->link, SATA_PMP_GSCR_FEAT_EN, + gscr[SATA_PMP_GSCR_FEAT_EN]); + if (err_mask) { + rc = -EIO; + reason = "failed to write GSCR_FEAT_EN"; + goto fail; + } + } + + if (print_info) { + ata_dev_printk(dev, KERN_INFO, "Port Multiplier %s, " + "0x%04x:0x%04x r%d, %d ports, feat 0x%x/0x%x\n", + sata_pmp_spec_rev_str(gscr), + sata_pmp_gscr_vendor(gscr), + sata_pmp_gscr_devid(gscr), + sata_pmp_gscr_rev(gscr), + nr_ports, gscr[SATA_PMP_GSCR_FEAT_EN], + gscr[SATA_PMP_GSCR_FEAT]); + + if (!(dev->flags & ATA_DFLAG_AN)) + ata_dev_printk(dev, KERN_INFO, + "Asynchronous notification not supported, " + "hotplug won't\n work on fan-out " + "ports. Use warm-plug instead.\n"); + } + + return 0; + + fail: + ata_dev_printk(dev, KERN_ERR, + "failed to configure Port Multiplier (%s, Emask=0x%x)\n", + reason, err_mask); + return rc; +} + +static int sata_pmp_init_links(struct ata_port *ap, int nr_ports) +{ + struct ata_link *pmp_link = ap->pmp_link; + int i; + + if (!pmp_link) { + pmp_link = kzalloc(sizeof(pmp_link[0]) * SATA_PMP_MAX_PORTS, + GFP_NOIO); + if (!pmp_link) + return -ENOMEM; + + for (i = 0; i < SATA_PMP_MAX_PORTS; i++) + ata_link_init(ap, &pmp_link[i], i); + + ap->pmp_link = pmp_link; + } + + for (i = 0; i < nr_ports; i++) { + struct ata_link *link = &pmp_link[i]; + struct ata_eh_context *ehc = &link->eh_context; + + link->flags = 0; + ehc->i.probe_mask |= 1; + ehc->i.action |= ATA_EH_SOFTRESET; + ehc->i.flags |= ATA_EHI_RESUME_LINK; + } + + return 0; +} + +static void sata_pmp_quirks(struct ata_port *ap) +{ + u32 *gscr = ap->link.device->gscr; + u16 vendor = sata_pmp_gscr_vendor(gscr); + u16 devid = sata_pmp_gscr_devid(gscr); + struct ata_link *link; + + if (vendor == 0x1095 && devid == 0x3726) { + /* sil3726 quirks */ + ata_port_for_each_link(link, ap) { + /* SError.N need a kick in the ass to get working */ + link->flags |= ATA_LFLAG_HRST_TO_RESUME; + + /* class code report is unreliable */ + if (link->pmp < 5) + link->flags |= ATA_LFLAG_ASSUME_ATA; + + /* port 5 is for SEMB device and it doesn't like SRST */ + if (link->pmp == 5) + link->flags |= ATA_LFLAG_NO_SRST | + ATA_LFLAG_ASSUME_SEMB; + } + } else if (vendor == 0x1095 && devid == 0x4723) { + /* sil4723 quirks */ + ata_port_for_each_link(link, ap) { + /* SError.N need a kick in the ass to get working */ + link->flags |= ATA_LFLAG_HRST_TO_RESUME; + + /* class code report is unreliable */ + if (link->pmp < 2) + link->flags |= ATA_LFLAG_ASSUME_ATA; + + /* the config device at port 2 locks up on SRST */ + if (link->pmp == 2) + link->flags |= ATA_LFLAG_NO_SRST | + ATA_LFLAG_ASSUME_ATA; + } + } else if (vendor == 0x1095 && devid == 0x4726) { + /* sil4726 quirks */ + ata_port_for_each_link(link, ap) { + /* SError.N need a kick in the ass to get working */ + link->flags |= ATA_LFLAG_HRST_TO_RESUME; + + /* class code report is unreliable */ + if (link->pmp < 5) + link->flags |= ATA_LFLAG_ASSUME_ATA; + + /* The config device, which can be either at + * port 0 or 5, locks up on SRST. + */ + if (link->pmp == 0 || link->pmp == 5) + link->flags |= ATA_LFLAG_NO_SRST | + ATA_LFLAG_ASSUME_ATA; + + /* Port 6 is for SEMB device which doesn't + * like SRST either. + */ + if (link->pmp == 6) + link->flags |= ATA_LFLAG_NO_SRST | + ATA_LFLAG_ASSUME_SEMB; + } + } else if (vendor == 0x1095 && (devid == 0x5723 || devid == 0x5733 || + devid == 0x5734 || devid == 0x5744)) { + /* sil5723/5744 quirks */ + + /* sil5723/5744 has either two or three downstream + * ports depending on operation mode. The last port + * is empty if any actual IO device is available or + * occupied by a pseudo configuration device + * otherwise. Don't try hard to recover it. + */ + ap->pmp_link[ap->nr_pmp_links - 1].flags |= ATA_LFLAG_NO_RETRY; + } else if (vendor == 0x11ab && devid == 0x4140) { + /* Marvell 88SM4140 quirks. Fan-out ports require PHY + * reset to work; other than that, it behaves very + * nicely. + */ + ata_port_for_each_link(link, ap) + link->flags |= ATA_LFLAG_HRST_TO_RESUME; + } +} + +/** + * sata_pmp_attach - attach a SATA PMP device + * @dev: SATA PMP device to attach + * + * Configure and attach SATA PMP device @dev. This function is + * also responsible for allocating and initializing PMP links. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, -errno on failure. + */ +int sata_pmp_attach(struct ata_device *dev) +{ + struct ata_link *link = dev->link; + struct ata_port *ap = link->ap; + unsigned long flags; + struct ata_link *tlink; + int rc; + + /* is it hanging off the right place? */ + if (!(ap->flags & ATA_FLAG_PMP)) { + ata_dev_printk(dev, KERN_ERR, + "host does not support Port Multiplier\n"); + return -EINVAL; + } + + if (!ata_is_host_link(link)) { + ata_dev_printk(dev, KERN_ERR, + "Port Multipliers cannot be nested\n"); + return -EINVAL; + } + + if (dev->devno) { + ata_dev_printk(dev, KERN_ERR, + "Port Multiplier must be the first device\n"); + return -EINVAL; + } + + WARN_ON(link->pmp != 0); + link->pmp = SATA_PMP_CTRL_PORT; + + /* read GSCR block */ + rc = sata_pmp_read_gscr(dev, dev->gscr); + if (rc) + goto fail; + + /* config PMP */ + rc = sata_pmp_configure(dev, 1); + if (rc) + goto fail; + + rc = sata_pmp_init_links(ap, sata_pmp_gscr_ports(dev->gscr)); + if (rc) { + ata_dev_printk(dev, KERN_INFO, + "failed to initialize PMP links\n"); + goto fail; + } + + /* attach it */ + spin_lock_irqsave(ap->lock, flags); + WARN_ON(ap->nr_pmp_links); + ap->nr_pmp_links = sata_pmp_gscr_ports(dev->gscr); + spin_unlock_irqrestore(ap->lock, flags); + + sata_pmp_quirks(ap); + + if (ap->ops->pmp_attach) + ap->ops->pmp_attach(ap); + + ata_port_for_each_link(tlink, ap) + sata_link_init_spd(tlink); + + ata_acpi_associate_sata_port(ap); + + return 0; + + fail: + link->pmp = 0; + return rc; +} + +/** + * sata_pmp_detach - detach a SATA PMP device + * @dev: SATA PMP device to detach + * + * Detach SATA PMP device @dev. This function is also + * responsible for deconfiguring PMP links. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +static void sata_pmp_detach(struct ata_device *dev) +{ + struct ata_link *link = dev->link; + struct ata_port *ap = link->ap; + struct ata_link *tlink; + unsigned long flags; + + ata_dev_printk(dev, KERN_INFO, "Port Multiplier detaching\n"); + + WARN_ON(!ata_is_host_link(link) || dev->devno || + link->pmp != SATA_PMP_CTRL_PORT); + + if (ap->ops->pmp_detach) + ap->ops->pmp_detach(ap); + + ata_port_for_each_link(tlink, ap) + ata_eh_detach_dev(tlink->device); + + spin_lock_irqsave(ap->lock, flags); + ap->nr_pmp_links = 0; + link->pmp = 0; + spin_unlock_irqrestore(ap->lock, flags); + + ata_acpi_associate_sata_port(ap); +} + +/** + * sata_pmp_same_pmp - does new GSCR matches the configured PMP? + * @dev: PMP device to compare against + * @new_gscr: GSCR block of the new device + * + * Compare @new_gscr against @dev and determine whether @dev is + * the PMP described by @new_gscr. + * + * LOCKING: + * None. + * + * RETURNS: + * 1 if @dev matches @new_gscr, 0 otherwise. + */ +static int sata_pmp_same_pmp(struct ata_device *dev, const u32 *new_gscr) +{ + const u32 *old_gscr = dev->gscr; + u16 old_vendor, new_vendor, old_devid, new_devid; + int old_nr_ports, new_nr_ports; + + old_vendor = sata_pmp_gscr_vendor(old_gscr); + new_vendor = sata_pmp_gscr_vendor(new_gscr); + old_devid = sata_pmp_gscr_devid(old_gscr); + new_devid = sata_pmp_gscr_devid(new_gscr); + old_nr_ports = sata_pmp_gscr_ports(old_gscr); + new_nr_ports = sata_pmp_gscr_ports(new_gscr); + + if (old_vendor != new_vendor) { + ata_dev_printk(dev, KERN_INFO, "Port Multiplier " + "vendor mismatch '0x%x' != '0x%x'\n", + old_vendor, new_vendor); + return 0; + } + + if (old_devid != new_devid) { + ata_dev_printk(dev, KERN_INFO, "Port Multiplier " + "device ID mismatch '0x%x' != '0x%x'\n", + old_devid, new_devid); + return 0; + } + + if (old_nr_ports != new_nr_ports) { + ata_dev_printk(dev, KERN_INFO, "Port Multiplier " + "nr_ports mismatch '0x%x' != '0x%x'\n", + old_nr_ports, new_nr_ports); + return 0; + } + + return 1; +} + +/** + * sata_pmp_revalidate - revalidate SATA PMP + * @dev: PMP device to revalidate + * @new_class: new class code + * + * Re-read GSCR block and make sure @dev is still attached to the + * port and properly configured. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +static int sata_pmp_revalidate(struct ata_device *dev, unsigned int new_class) +{ + struct ata_link *link = dev->link; + struct ata_port *ap = link->ap; + u32 *gscr = (void *)ap->sector_buf; + int rc; + + DPRINTK("ENTER\n"); + + ata_eh_about_to_do(link, NULL, ATA_EH_REVALIDATE); + + if (!ata_dev_enabled(dev)) { + rc = -ENODEV; + goto fail; + } + + /* wrong class? */ + if (ata_class_enabled(new_class) && new_class != ATA_DEV_PMP) { + rc = -ENODEV; + goto fail; + } + + /* read GSCR */ + rc = sata_pmp_read_gscr(dev, gscr); + if (rc) + goto fail; + + /* is the pmp still there? */ + if (!sata_pmp_same_pmp(dev, gscr)) { + rc = -ENODEV; + goto fail; + } + + memcpy(dev->gscr, gscr, sizeof(gscr[0]) * SATA_PMP_GSCR_DWORDS); + + rc = sata_pmp_configure(dev, 0); + if (rc) + goto fail; + + ata_eh_done(link, NULL, ATA_EH_REVALIDATE); + + DPRINTK("EXIT, rc=0\n"); + return 0; + + fail: + ata_dev_printk(dev, KERN_ERR, + "PMP revalidation failed (errno=%d)\n", rc); + DPRINTK("EXIT, rc=%d\n", rc); + return rc; +} + +/** + * sata_pmp_revalidate_quick - revalidate SATA PMP quickly + * @dev: PMP device to revalidate + * + * Make sure the attached PMP is accessible. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +static int sata_pmp_revalidate_quick(struct ata_device *dev) +{ + unsigned int err_mask; + u32 prod_id; + + err_mask = sata_pmp_read(dev->link, SATA_PMP_GSCR_PROD_ID, &prod_id); + if (err_mask) { + ata_dev_printk(dev, KERN_ERR, "failed to read PMP product ID " + "(Emask=0x%x)\n", err_mask); + return -EIO; + } + + if (prod_id != dev->gscr[SATA_PMP_GSCR_PROD_ID]) { + ata_dev_printk(dev, KERN_ERR, "PMP product ID mismatch\n"); + /* something weird is going on, request full PMP recovery */ + return -EIO; + } + + return 0; +} + +/** + * sata_pmp_eh_recover_pmp - recover PMP + * @ap: ATA port PMP is attached to + * @prereset: prereset method (can be NULL) + * @softreset: softreset method + * @hardreset: hardreset method + * @postreset: postreset method (can be NULL) + * + * Recover PMP attached to @ap. Recovery procedure is somewhat + * similar to that of ata_eh_recover() except that reset should + * always be performed in hard->soft sequence and recovery + * failure results in PMP detachment. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, -errno on failure. + */ +static int sata_pmp_eh_recover_pmp(struct ata_port *ap, + ata_prereset_fn_t prereset, ata_reset_fn_t softreset, + ata_reset_fn_t hardreset, ata_postreset_fn_t postreset) +{ + struct ata_link *link = &ap->link; + struct ata_eh_context *ehc = &link->eh_context; + struct ata_device *dev = link->device; + int tries = ATA_EH_PMP_TRIES; + int detach = 0, rc = 0; + int reval_failed = 0; + + DPRINTK("ENTER\n"); + + if (dev->flags & ATA_DFLAG_DETACH) { + detach = 1; + goto fail; + } + + retry: + ehc->classes[0] = ATA_DEV_UNKNOWN; + + if (ehc->i.action & ATA_EH_RESET_MASK) { + struct ata_link *tlink; + + ata_eh_freeze_port(ap); + + /* reset */ + ehc->i.action = ATA_EH_HARDRESET; + rc = ata_eh_reset(link, 0, prereset, softreset, hardreset, + postreset); + if (rc) { + ata_link_printk(link, KERN_ERR, + "failed to reset PMP, giving up\n"); + goto fail; + } + + ata_eh_thaw_port(ap); + + /* PMP is reset, SErrors cannot be trusted, scan all */ + ata_port_for_each_link(tlink, ap) + ata_ehi_schedule_probe(&tlink->eh_context.i); + } + + /* If revalidation is requested, revalidate and reconfigure; + * otherwise, do quick revalidation. + */ + if (ehc->i.action & ATA_EH_REVALIDATE) + rc = sata_pmp_revalidate(dev, ehc->classes[0]); + else + rc = sata_pmp_revalidate_quick(dev); + + if (rc) { + tries--; + + if (rc == -ENODEV) { + ehc->i.probe_mask |= 1; + detach = 1; + /* give it just two more chances */ + tries = min(tries, 2); + } + + if (tries) { + int sleep = ehc->i.flags & ATA_EHI_DID_RESET; + + /* consecutive revalidation failures? speed down */ + if (reval_failed) + sata_down_spd_limit(link); + else + reval_failed = 1; + + ata_dev_printk(dev, KERN_WARNING, + "retrying hardreset%s\n", + sleep ? " in 5 secs" : ""); + if (sleep) + ssleep(5); + ehc->i.action |= ATA_EH_HARDRESET; + goto retry; + } else { + ata_dev_printk(dev, KERN_ERR, "failed to recover PMP " + "after %d tries, giving up\n", + ATA_EH_PMP_TRIES); + goto fail; + } + } + + /* okay, PMP resurrected */ + ehc->i.flags = 0; + + DPRINTK("EXIT, rc=0\n"); + return 0; + + fail: + sata_pmp_detach(dev); + if (detach) + ata_eh_detach_dev(dev); + else + ata_dev_disable(dev); + + DPRINTK("EXIT, rc=%d\n", rc); + return rc; +} + +static int sata_pmp_eh_handle_disabled_links(struct ata_port *ap) +{ + struct ata_link *link; + unsigned long flags; + int rc; + + spin_lock_irqsave(ap->lock, flags); + + ata_port_for_each_link(link, ap) { + if (!(link->flags & ATA_LFLAG_DISABLED)) + continue; + + spin_unlock_irqrestore(ap->lock, flags); + + /* Some PMPs require hardreset sequence to get + * SError.N working. + */ + if ((link->flags & ATA_LFLAG_HRST_TO_RESUME) && + (link->eh_context.i.flags & ATA_EHI_RESUME_LINK)) + sata_link_hardreset(link, sata_deb_timing_normal, + jiffies + ATA_TMOUT_INTERNAL_QUICK); + + /* unconditionally clear SError.N */ + rc = sata_scr_write(link, SCR_ERROR, SERR_PHYRDY_CHG); + if (rc) { + ata_link_printk(link, KERN_ERR, "failed to clear " + "SError.N (errno=%d)\n", rc); + return rc; + } + + spin_lock_irqsave(ap->lock, flags); + } + + spin_unlock_irqrestore(ap->lock, flags); + + return 0; +} + +static int sata_pmp_handle_link_fail(struct ata_link *link, int *link_tries) +{ + struct ata_port *ap = link->ap; + unsigned long flags; + + if (link_tries[link->pmp] && --link_tries[link->pmp]) + return 1; + + /* disable this link */ + if (!(link->flags & ATA_LFLAG_DISABLED)) { + ata_link_printk(link, KERN_WARNING, + "failed to recover link after %d tries, disabling\n", + ATA_EH_PMP_LINK_TRIES); + + spin_lock_irqsave(ap->lock, flags); + link->flags |= ATA_LFLAG_DISABLED; + spin_unlock_irqrestore(ap->lock, flags); + } + + ata_dev_disable(link->device); + link->eh_context.i.action = 0; + + return 0; +} + +/** + * sata_pmp_eh_recover - recover PMP-enabled port + * @ap: ATA port to recover + * @prereset: prereset method (can be NULL) + * @softreset: softreset method + * @hardreset: hardreset method + * @postreset: postreset method (can be NULL) + * @pmp_prereset: PMP prereset method (can be NULL) + * @pmp_softreset: PMP softreset method (can be NULL) + * @pmp_hardreset: PMP hardreset method (can be NULL) + * @pmp_postreset: PMP postreset method (can be NULL) + * + * Drive EH recovery operation for PMP enabled port @ap. This + * function recovers host and PMP ports with proper retrials and + * fallbacks. Actual recovery operations are performed using + * ata_eh_recover() and sata_pmp_eh_recover_pmp(). + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, -errno on failure. + */ +static int sata_pmp_eh_recover(struct ata_port *ap, + ata_prereset_fn_t prereset, ata_reset_fn_t softreset, + ata_reset_fn_t hardreset, ata_postreset_fn_t postreset, + ata_prereset_fn_t pmp_prereset, ata_reset_fn_t pmp_softreset, + ata_reset_fn_t pmp_hardreset, ata_postreset_fn_t pmp_postreset) +{ + int pmp_tries, link_tries[SATA_PMP_MAX_PORTS]; + struct ata_link *pmp_link = &ap->link; + struct ata_device *pmp_dev = pmp_link->device; + struct ata_eh_context *pmp_ehc = &pmp_link->eh_context; + struct ata_link *link; + struct ata_device *dev; + unsigned int err_mask; + u32 gscr_error, sntf; + int cnt, rc; + + pmp_tries = ATA_EH_PMP_TRIES; + ata_port_for_each_link(link, ap) + link_tries[link->pmp] = ATA_EH_PMP_LINK_TRIES; + + retry: + /* PMP attached? */ + if (!ap->nr_pmp_links) { + rc = ata_eh_recover(ap, prereset, softreset, hardreset, + postreset, NULL); + if (rc) { + ata_link_for_each_dev(dev, &ap->link) + ata_dev_disable(dev); + return rc; + } + + if (pmp_dev->class != ATA_DEV_PMP) + return 0; + + /* new PMP online */ + ata_port_for_each_link(link, ap) + link_tries[link->pmp] = ATA_EH_PMP_LINK_TRIES; + + /* fall through */ + } + + /* recover pmp */ + rc = sata_pmp_eh_recover_pmp(ap, prereset, softreset, hardreset, + postreset); + if (rc) + goto pmp_fail; + + /* handle disabled links */ + rc = sata_pmp_eh_handle_disabled_links(ap); + if (rc) + goto pmp_fail; + + /* recover links */ + rc = ata_eh_recover(ap, pmp_prereset, pmp_softreset, pmp_hardreset, + pmp_postreset, &link); + if (rc) + goto link_fail; + + /* Connection status might have changed while resetting other + * links, check SATA_PMP_GSCR_ERROR before returning. + */ + + /* clear SNotification */ + rc = sata_scr_read(&ap->link, SCR_NOTIFICATION, &sntf); + if (rc == 0) + sata_scr_write(&ap->link, SCR_NOTIFICATION, sntf); + + /* enable notification */ + if (pmp_dev->flags & ATA_DFLAG_AN) { + pmp_dev->gscr[SATA_PMP_GSCR_FEAT_EN] |= SATA_PMP_FEAT_NOTIFY; + + err_mask = sata_pmp_write(pmp_dev->link, SATA_PMP_GSCR_FEAT_EN, + pmp_dev->gscr[SATA_PMP_GSCR_FEAT_EN]); + if (err_mask) { + ata_dev_printk(pmp_dev, KERN_ERR, "failed to write " + "PMP_FEAT_EN (Emask=0x%x)\n", err_mask); + rc = -EIO; + goto pmp_fail; + } + } + + /* check GSCR_ERROR */ + err_mask = sata_pmp_read(pmp_link, SATA_PMP_GSCR_ERROR, &gscr_error); + if (err_mask) { + ata_dev_printk(pmp_dev, KERN_ERR, "failed to read " + "PMP_GSCR_ERROR (Emask=0x%x)\n", err_mask); + rc = -EIO; + goto pmp_fail; + } + + cnt = 0; + ata_port_for_each_link(link, ap) { + if (!(gscr_error & (1 << link->pmp))) + continue; + + if (sata_pmp_handle_link_fail(link, link_tries)) { + ata_ehi_hotplugged(&link->eh_context.i); + cnt++; + } else { + ata_link_printk(link, KERN_WARNING, + "PHY status changed but maxed out on retries, " + "giving up\n"); + ata_link_printk(link, KERN_WARNING, + "Manully issue scan to resume this link\n"); + } + } + + if (cnt) { + ata_port_printk(ap, KERN_INFO, "PMP SError.N set for some " + "ports, repeating recovery\n"); + goto retry; + } + + return 0; + + link_fail: + if (sata_pmp_handle_link_fail(link, link_tries)) { + pmp_ehc->i.action |= ATA_EH_HARDRESET; + goto retry; + } + + /* fall through */ + pmp_fail: + /* Control always ends up here after detaching PMP. Shut up + * and return if we're unloading. + */ + if (ap->pflags & ATA_PFLAG_UNLOADING) + return rc; + + if (!ap->nr_pmp_links) + goto retry; + + if (--pmp_tries) { + ata_port_printk(ap, KERN_WARNING, + "failed to recover PMP, retrying in 5 secs\n"); + pmp_ehc->i.action |= ATA_EH_HARDRESET; + ssleep(5); + goto retry; + } + + ata_port_printk(ap, KERN_ERR, + "failed to recover PMP after %d tries, giving up\n", + ATA_EH_PMP_TRIES); + sata_pmp_detach(pmp_dev); + ata_dev_disable(pmp_dev); + + return rc; +} + +/** + * sata_pmp_do_eh - do standard error handling for PMP-enabled host + * @ap: host port to handle error for + * @prereset: prereset method (can be NULL) + * @softreset: softreset method + * @hardreset: hardreset method + * @postreset: postreset method (can be NULL) + * @pmp_prereset: PMP prereset method (can be NULL) + * @pmp_softreset: PMP softreset method (can be NULL) + * @pmp_hardreset: PMP hardreset method (can be NULL) + * @pmp_postreset: PMP postreset method (can be NULL) + * + * Perform standard error handling sequence for PMP-enabled host + * @ap. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +void sata_pmp_do_eh(struct ata_port *ap, + ata_prereset_fn_t prereset, ata_reset_fn_t softreset, + ata_reset_fn_t hardreset, ata_postreset_fn_t postreset, + ata_prereset_fn_t pmp_prereset, ata_reset_fn_t pmp_softreset, + ata_reset_fn_t pmp_hardreset, ata_postreset_fn_t pmp_postreset) +{ + ata_eh_autopsy(ap); + ata_eh_report(ap); + sata_pmp_eh_recover(ap, prereset, softreset, hardreset, postreset, + pmp_prereset, pmp_softreset, pmp_hardreset, + pmp_postreset); + ata_eh_finish(ap); +} diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index e836476..ea53e6a 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -71,11 +71,10 @@ static int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel, #define ALL_SUB_MPAGES 0xff -static const u8 def_rw_recovery_mpage[] = { +static const u8 def_rw_recovery_mpage[RW_RECOVERY_MPAGE_LEN] = { RW_RECOVERY_MPAGE, RW_RECOVERY_MPAGE_LEN - 2, - (1 << 7) | /* AWRE, sat-r06 say it shall be 0 */ - (1 << 6), /* ARRE (auto read reallocation) */ + (1 << 7), /* AWRE */ 0, /* read retry count */ 0, 0, 0, 0, 0, /* write retry count */ @@ -450,13 +449,8 @@ static struct ata_queued_cmd *ata_scsi_qc_new(struct ata_device *dev, qc->scsicmd = cmd; qc->scsidone = done; - if (cmd->use_sg) { - qc->__sg = (struct scatterlist *) cmd->request_buffer; - qc->n_elem = cmd->use_sg; - } else if (cmd->request_bufflen) { - qc->__sg = &qc->sgent; - qc->n_elem = 1; - } + qc->__sg = scsi_sglist(cmd); + qc->n_elem = scsi_sg_count(cmd); } else { cmd->result = (DID_OK << 16) | (QUEUE_FULL << 1); done(cmd); @@ -755,6 +749,13 @@ static void ata_scsi_sdev_config(struct scsi_device *sdev) { sdev->use_10_for_rw = 1; sdev->use_10_for_ms = 1; + + /* Schedule policy is determined by ->qc_defer() callback and + * it needs to see every deferred qc. Set dev_blocked to 1 to + * prevent SCSI midlayer from automatically deferring + * requests. + */ + sdev->max_device_blocked = 1; } static void ata_scsi_dev_config(struct scsi_device *sdev, @@ -943,6 +944,13 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc) goto invalid_fld; /* LOEJ bit set not supported */ if (((cdb[4] >> 4) & 0xf) != 0) goto invalid_fld; /* power conditions not supported */ + + if (qc->dev->horkage & ATA_HORKAGE_SKIP_PM) { + /* the device lacks PM support, finish without doing anything */ + scmd->result = SAM_STAT_GOOD; + return 1; + } + if (cdb[4] & 0x1) { tf->nsect = 1; /* 1 sector, lba=0 */ @@ -1368,14 +1376,14 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc) case ATA_CMD_SET_FEATURES: if ((qc->tf.feature == SETFEATURES_WC_ON) || (qc->tf.feature == SETFEATURES_WC_OFF)) { - ap->eh_info.action |= ATA_EH_REVALIDATE; + ap->link.eh_info.action |= ATA_EH_REVALIDATE; ata_port_schedule_eh(ap); } break; case ATA_CMD_INIT_DEV_PARAMS: /* CHS translation changed */ case ATA_CMD_SET_MULTI: /* multi_count changed */ - ap->eh_info.action |= ATA_EH_REVALIDATE; + ap->link.eh_info.action |= ATA_EH_REVALIDATE; ata_port_schedule_eh(ap); break; } @@ -1422,37 +1430,6 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc) } /** - * ata_scmd_need_defer - Check whether we need to defer scmd - * @dev: ATA device to which the command is addressed - * @is_io: Is the command IO (and thus possibly NCQ)? - * - * NCQ and non-NCQ commands cannot run together. As upper layer - * only knows the queue depth, we are responsible for maintaining - * exclusion. This function checks whether a new command can be - * issued to @dev. - * - * LOCKING: - * spin_lock_irqsave(host lock) - * - * RETURNS: - * 1 if deferring is needed, 0 otherwise. - */ -static int ata_scmd_need_defer(struct ata_device *dev, int is_io) -{ - struct ata_port *ap = dev->ap; - int is_ncq = is_io && ata_ncq_enabled(dev); - - if (is_ncq) { - if (!ata_tag_valid(ap->active_tag)) - return 0; - } else { - if (!ata_tag_valid(ap->active_tag) && !ap->sactive) - return 0; - } - return 1; -} - -/** * ata_scsi_translate - Translate then issue SCSI command to ATA device * @dev: ATA device to which the command is addressed * @cmd: SCSI command to execute @@ -1483,14 +1460,12 @@ static int ata_scsi_translate(struct ata_device *dev, struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), ata_xlat_func_t xlat_func) { + struct ata_port *ap = dev->link->ap; struct ata_queued_cmd *qc; - int is_io = xlat_func == ata_scsi_rw_xlat; + int rc; VPRINTK("ENTER\n"); - if (unlikely(ata_scmd_need_defer(dev, is_io))) - goto defer; - qc = ata_scsi_qc_new(dev, cmd, done); if (!qc) goto err_mem; @@ -1498,17 +1473,13 @@ static int ata_scsi_translate(struct ata_device *dev, struct scsi_cmnd *cmd, /* data is present; dma-map it */ if (cmd->sc_data_direction == DMA_FROM_DEVICE || cmd->sc_data_direction == DMA_TO_DEVICE) { - if (unlikely(cmd->request_bufflen < 1)) { + if (unlikely(scsi_bufflen(cmd) < 1)) { ata_dev_printk(dev, KERN_WARNING, "WARNING: zero len r/w req\n"); goto err_did; } - if (cmd->use_sg) - ata_sg_init(qc, cmd->request_buffer, cmd->use_sg); - else - ata_sg_init_one(qc, cmd->request_buffer, - cmd->request_bufflen); + ata_sg_init(qc, scsi_sglist(cmd), scsi_sg_count(cmd)); qc->dma_dir = cmd->sc_data_direction; } @@ -1518,6 +1489,11 @@ static int ata_scsi_translate(struct ata_device *dev, struct scsi_cmnd *cmd, if (xlat_func(qc)) goto early_finish; + if (ap->ops->qc_defer) { + if ((rc = ap->ops->qc_defer(qc))) + goto defer; + } + /* select device, send command to hardware */ ata_qc_issue(qc); @@ -1539,8 +1515,12 @@ err_mem: return 0; defer: + ata_qc_free(qc); DPRINTK("EXIT - defer\n"); - return SCSI_MLQUEUE_DEVICE_BUSY; + if (rc == ATA_DEFER_LINK) + return SCSI_MLQUEUE_DEVICE_BUSY; + else + return SCSI_MLQUEUE_HOST_BUSY; } /** @@ -1562,15 +1542,14 @@ static unsigned int ata_scsi_rbuf_get(struct scsi_cmnd *cmd, u8 **buf_out) u8 *buf; unsigned int buflen; - if (cmd->use_sg) { - struct scatterlist *sg; + struct scatterlist *sg = scsi_sglist(cmd); - sg = (struct scatterlist *) cmd->request_buffer; + if (sg) { buf = kmap_atomic(sg->page, KM_IRQ0) + sg->offset; buflen = sg->length; } else { - buf = cmd->request_buffer; - buflen = cmd->request_bufflen; + buf = NULL; + buflen = 0; } *buf_out = buf; @@ -1590,12 +1569,9 @@ static unsigned int ata_scsi_rbuf_get(struct scsi_cmnd *cmd, u8 **buf_out) static inline void ata_scsi_rbuf_put(struct scsi_cmnd *cmd, u8 *buf) { - if (cmd->use_sg) { - struct scatterlist *sg; - - sg = (struct scatterlist *) cmd->request_buffer; + struct scatterlist *sg = scsi_sglist(cmd); + if (sg) kunmap_atomic(buf - sg->offset, KM_IRQ0); - } } /** @@ -1817,6 +1793,62 @@ unsigned int ata_scsiop_inq_83(struct ata_scsi_args *args, u8 *rbuf, } /** + * ata_scsiop_inq_89 - Simulate INQUIRY VPD page 89, ATA info + * @args: device IDENTIFY data / SCSI command of interest. + * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. + * @buflen: Response buffer length. + * + * Yields SAT-specified ATA VPD page. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ + +unsigned int ata_scsiop_inq_89(struct ata_scsi_args *args, u8 *rbuf, + unsigned int buflen) +{ + u8 pbuf[60]; + struct ata_taskfile tf; + unsigned int i; + + if (!buflen) + return 0; + + memset(&pbuf, 0, sizeof(pbuf)); + memset(&tf, 0, sizeof(tf)); + + pbuf[1] = 0x89; /* our page code */ + pbuf[2] = (0x238 >> 8); /* page size fixed at 238h */ + pbuf[3] = (0x238 & 0xff); + + memcpy(&pbuf[8], "linux ", 8); + memcpy(&pbuf[16], "libata ", 16); + memcpy(&pbuf[32], DRV_VERSION, 4); + ata_id_string(args->id, &pbuf[32], ATA_ID_FW_REV, 4); + + /* we don't store the ATA device signature, so we fake it */ + + tf.command = ATA_DRDY; /* really, this is Status reg */ + tf.lbal = 0x1; + tf.nsect = 0x1; + + ata_tf_to_fis(&tf, 0, 1, &pbuf[36]); /* TODO: PMP? */ + pbuf[36] = 0x34; /* force D2H Reg FIS (34h) */ + + pbuf[56] = ATA_CMD_ID_ATA; + + i = min(buflen, 60U); + memcpy(rbuf, &pbuf[0], i); + buflen -= i; + + if (!buflen) + return 0; + + memcpy(&rbuf[60], &args->id[0], min(buflen, 512U)); + return 0; +} + +/** * ata_scsiop_noop - Command handler that simply returns success. * @args: device IDENTIFY data / SCSI command of interest. * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. @@ -2273,8 +2305,8 @@ static void atapi_request_sense(struct ata_queued_cmd *qc) qc->tf.feature |= ATAPI_PKT_DMA; } else { qc->tf.protocol = ATA_PROT_ATAPI; - qc->tf.lbam = (8 * 1024) & 0xff; - qc->tf.lbah = (8 * 1024) >> 8; + qc->tf.lbam = SCSI_SENSE_BUFFERSIZE; + qc->tf.lbah = 0; } qc->nbytes = SCSI_SENSE_BUFFERSIZE; @@ -2383,6 +2415,7 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc) struct ata_device *dev = qc->dev; int using_pio = (dev->flags & ATA_DFLAG_PIO); int nodata = (scmd->sc_data_direction == DMA_NONE); + unsigned int nbytes; memset(qc->cdb, 0, dev->cdb_len); memcpy(qc->cdb, scmd->cmnd, scmd->cmd_len); @@ -2396,20 +2429,26 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc) } qc->tf.command = ATA_CMD_PACKET; - qc->nbytes = scmd->request_bufflen; + qc->nbytes = scsi_bufflen(scmd); /* check whether ATAPI DMA is safe */ if (!using_pio && ata_check_atapi_dma(qc)) using_pio = 1; + /* Some controller variants snoop this value for Packet transfers + to do state machine and FIFO management. Thus we want to set it + properly, and for DMA where it is effectively meaningless */ + nbytes = min(qc->nbytes, (unsigned int)63 * 1024); + + qc->tf.lbam = (nbytes & 0xFF); + qc->tf.lbah = (nbytes >> 8); + if (using_pio || nodata) { /* no data, or PIO data xfer */ if (nodata) qc->tf.protocol = ATA_PROT_ATAPI_NODATA; else qc->tf.protocol = ATA_PROT_ATAPI; - qc->tf.lbam = (8 * 1024) & 0xff; - qc->tf.lbah = (8 * 1024) >> 8; } else { /* DMA data xfer */ qc->tf.protocol = ATA_PROT_ATAPI_DMA; @@ -2420,24 +2459,42 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc) qc->tf.feature |= ATAPI_DMADIR; } + + /* FIXME: We need to translate 0x05 READ_BLOCK_LIMITS to a MODE_SENSE + as ATAPI tape drives don't get this right otherwise */ return 0; } -static struct ata_device * ata_find_dev(struct ata_port *ap, int id) +static struct ata_device * ata_find_dev(struct ata_port *ap, int devno) { - if (likely(id < ATA_MAX_DEVICES)) - return &ap->device[id]; + if (ap->nr_pmp_links == 0) { + if (likely(devno < ata_link_max_devices(&ap->link))) + return &ap->link.device[devno]; + } else { + if (likely(devno < ap->nr_pmp_links)) + return &ap->pmp_link[devno].device[0]; + } + return NULL; } static struct ata_device * __ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev) { + int devno; + /* skip commands not addressed to targets we simulate */ - if (unlikely(scsidev->channel || scsidev->lun)) - return NULL; + if (ap->nr_pmp_links == 0) { + if (unlikely(scsidev->channel || scsidev->lun)) + return NULL; + devno = scsidev->id; + } else { + if (unlikely(scsidev->id || scsidev->lun)) + return NULL; + devno = scsidev->channel; + } - return ata_find_dev(ap, scsidev->id); + return ata_find_dev(ap, devno); } /** @@ -2458,7 +2515,7 @@ static int ata_scsi_dev_enabled(struct ata_device *dev) if (unlikely(!ata_dev_enabled(dev))) return 0; - if (!atapi_enabled || (dev->ap->flags & ATA_FLAG_NO_ATAPI)) { + if (!atapi_enabled || (dev->link->ap->flags & ATA_FLAG_NO_ATAPI)) { if (unlikely(dev->class == ATA_DEV_ATAPI)) { ata_dev_printk(dev, KERN_WARNING, "WARNING: ATAPI is %s, device ignored.\n", @@ -2631,7 +2688,7 @@ static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc) case ATA_CMD_WRITE_LONG_ONCE: if (tf->protocol != ATA_PROT_PIO || tf->nsect != 1) goto invalid_fld; - qc->sect_size = scmd->request_bufflen; + qc->sect_size = scsi_bufflen(scmd); } /* @@ -2661,7 +2718,7 @@ static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc) * TODO: find out if we need to do more here to * cover scatter/gather case. */ - qc->nbytes = scmd->request_bufflen; + qc->nbytes = scsi_bufflen(scmd); /* request result TF */ qc->flags |= ATA_QCFLAG_RESULT_TF; @@ -2746,28 +2803,48 @@ static inline int __ata_scsi_queuecmd(struct scsi_cmnd *scmd, void (*done)(struct scsi_cmnd *), struct ata_device *dev) { + u8 scsi_op = scmd->cmnd[0]; + ata_xlat_func_t xlat_func; int rc = 0; - if (unlikely(!scmd->cmd_len || scmd->cmd_len > dev->cdb_len)) { - DPRINTK("bad CDB len=%u, max=%u\n", - scmd->cmd_len, dev->cdb_len); - scmd->result = DID_ERROR << 16; - done(scmd); - return 0; - } - if (dev->class == ATA_DEV_ATA) { - ata_xlat_func_t xlat_func = ata_get_xlat_func(dev, - scmd->cmnd[0]); + if (unlikely(!scmd->cmd_len || scmd->cmd_len > dev->cdb_len)) + goto bad_cdb_len; - if (xlat_func) - rc = ata_scsi_translate(dev, scmd, done, xlat_func); - else - ata_scsi_simulate(dev, scmd, done); - } else - rc = ata_scsi_translate(dev, scmd, done, atapi_xlat); + xlat_func = ata_get_xlat_func(dev, scsi_op); + } else { + if (unlikely(!scmd->cmd_len)) + goto bad_cdb_len; + + xlat_func = NULL; + if (likely((scsi_op != ATA_16) || !atapi_passthru16)) { + /* relay SCSI command to ATAPI device */ + if (unlikely(scmd->cmd_len > dev->cdb_len)) + goto bad_cdb_len; + + xlat_func = atapi_xlat; + } else { + /* ATA_16 passthru, treat as an ATA command */ + if (unlikely(scmd->cmd_len > 16)) + goto bad_cdb_len; + + xlat_func = ata_get_xlat_func(dev, scsi_op); + } + } + + if (xlat_func) + rc = ata_scsi_translate(dev, scmd, done, xlat_func); + else + ata_scsi_simulate(dev, scmd, done); return rc; + + bad_cdb_len: + DPRINTK("bad CDB len=%u, scsi_op=0x%02x, max=%u\n", + scmd->cmd_len, scsi_op, dev->cdb_len); + scmd->result = DID_ERROR << 16; + done(scmd); + return 0; } /** @@ -2835,6 +2912,7 @@ void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd, { struct ata_scsi_args args; const u8 *scsicmd = cmd->cmnd; + u8 tmp8; args.dev = dev; args.id = dev->id; @@ -2842,15 +2920,9 @@ void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd, args.done = done; switch(scsicmd[0]) { - /* no-op's, complete with success */ - case SYNCHRONIZE_CACHE: - case REZERO_UNIT: - case SEEK_6: - case SEEK_10: - case TEST_UNIT_READY: - case FORMAT_UNIT: /* FIXME: correct? */ - case SEND_DIAGNOSTIC: /* FIXME: correct? */ - ata_scsi_rbuf_fill(&args, ata_scsiop_noop); + /* TODO: worth improving? */ + case FORMAT_UNIT: + ata_scsi_invalid_field(cmd, done); break; case INQUIRY: @@ -2858,14 +2930,23 @@ void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd, ata_scsi_invalid_field(cmd, done); else if ((scsicmd[1] & 1) == 0) /* is EVPD clear? */ ata_scsi_rbuf_fill(&args, ata_scsiop_inq_std); - else if (scsicmd[2] == 0x00) + else switch (scsicmd[2]) { + case 0x00: ata_scsi_rbuf_fill(&args, ata_scsiop_inq_00); - else if (scsicmd[2] == 0x80) + break; + case 0x80: ata_scsi_rbuf_fill(&args, ata_scsiop_inq_80); - else if (scsicmd[2] == 0x83) + break; + case 0x83: ata_scsi_rbuf_fill(&args, ata_scsiop_inq_83); - else + break; + case 0x89: + ata_scsi_rbuf_fill(&args, ata_scsiop_inq_89); + break; + default: ata_scsi_invalid_field(cmd, done); + break; + } break; case MODE_SENSE: @@ -2893,8 +2974,33 @@ void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd, ata_scsi_rbuf_fill(&args, ata_scsiop_report_luns); break; - /* mandatory commands we haven't implemented yet */ case REQUEST_SENSE: + ata_scsi_set_sense(cmd, 0, 0, 0); + cmd->result = (DRIVER_SENSE << 24); + done(cmd); + break; + + /* if we reach this, then writeback caching is disabled, + * turning this into a no-op. + */ + case SYNCHRONIZE_CACHE: + /* fall through */ + + /* no-op's, complete with success */ + case REZERO_UNIT: + case SEEK_6: + case SEEK_10: + case TEST_UNIT_READY: + ata_scsi_rbuf_fill(&args, ata_scsiop_noop); + break; + + case SEND_DIAGNOSTIC: + tmp8 = scsicmd[1] & ~(1 << 3); + if ((tmp8 == 0x4) && (!scsicmd[3]) && (!scsicmd[4])) + ata_scsi_rbuf_fill(&args, ata_scsiop_noop); + else + ata_scsi_invalid_field(cmd, done); + break; /* all other commands */ default: @@ -2928,6 +3034,13 @@ int ata_scsi_add_hosts(struct ata_host *host, struct scsi_host_template *sht) shost->max_channel = 1; shost->max_cmd_len = 16; + /* Schedule policy is determined by ->qc_defer() + * callback and it needs to see every deferred qc. + * Set host_blocked to 1 to prevent SCSI midlayer from + * automatically deferring requests. + */ + shost->max_host_blocked = 1; + rc = scsi_add_host(ap->scsi_host, ap->host->dev); if (rc) goto err_add; @@ -2951,25 +3064,32 @@ void ata_scsi_scan_host(struct ata_port *ap, int sync) { int tries = 5; struct ata_device *last_failed_dev = NULL; + struct ata_link *link; struct ata_device *dev; - unsigned int i; if (ap->flags & ATA_FLAG_DISABLED) return; repeat: - for (i = 0; i < ATA_MAX_DEVICES; i++) { - struct scsi_device *sdev; + ata_port_for_each_link(link, ap) { + ata_link_for_each_dev(dev, link) { + struct scsi_device *sdev; + int channel = 0, id = 0; - dev = &ap->device[i]; + if (!ata_dev_enabled(dev) || dev->sdev) + continue; - if (!ata_dev_enabled(dev) || dev->sdev) - continue; + if (ata_is_host_link(link)) + id = dev->devno; + else + channel = link->pmp; - sdev = __scsi_add_device(ap->scsi_host, 0, i, 0, NULL); - if (!IS_ERR(sdev)) { - dev->sdev = sdev; - scsi_device_put(sdev); + sdev = __scsi_add_device(ap->scsi_host, channel, id, 0, + NULL); + if (!IS_ERR(sdev)) { + dev->sdev = sdev; + scsi_device_put(sdev); + } } } @@ -2977,12 +3097,14 @@ void ata_scsi_scan_host(struct ata_port *ap, int sync) * failure occurred, scan would have failed silently. Check * whether all devices are attached. */ - for (i = 0; i < ATA_MAX_DEVICES; i++) { - dev = &ap->device[i]; - if (ata_dev_enabled(dev) && !dev->sdev) - break; + ata_port_for_each_link(link, ap) { + ata_link_for_each_dev(dev, link) { + if (ata_dev_enabled(dev) && !dev->sdev) + goto exit_loop; + } } - if (i == ATA_MAX_DEVICES) + exit_loop: + if (!link) return; /* we're missing some SCSI devices */ @@ -3049,7 +3171,7 @@ int ata_scsi_offline_dev(struct ata_device *dev) */ static void ata_scsi_remove_dev(struct ata_device *dev) { - struct ata_port *ap = dev->ap; + struct ata_port *ap = dev->link->ap; struct scsi_device *sdev; unsigned long flags; @@ -3096,6 +3218,43 @@ static void ata_scsi_remove_dev(struct ata_device *dev) } } +static void ata_scsi_handle_link_detach(struct ata_link *link) +{ + struct ata_port *ap = link->ap; + struct ata_device *dev; + + ata_link_for_each_dev(dev, link) { + unsigned long flags; + + if (!(dev->flags & ATA_DFLAG_DETACHED)) + continue; + + spin_lock_irqsave(ap->lock, flags); + dev->flags &= ~ATA_DFLAG_DETACHED; + spin_unlock_irqrestore(ap->lock, flags); + + ata_scsi_remove_dev(dev); + } +} + +/** + * ata_scsi_media_change_notify - send media change event + * @atadev: Pointer to the disk device with media change event + * + * Tell the block layer to send a media change notification + * event. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +void ata_scsi_media_change_notify(struct ata_device *dev) +{ +#ifdef OTHER_AN_PATCHES_HAVE_BEEN_APPLIED + if (dev->sdev) + scsi_device_event_notify(dev->sdev, SDEV_MEDIA_CHANGE); +#endif +} + /** * ata_scsi_hotplug - SCSI part of hotplug * @work: Pointer to ATA port to perform SCSI hotplug on @@ -3121,20 +3280,14 @@ void ata_scsi_hotplug(struct work_struct *work) DPRINTK("ENTER\n"); - /* unplug detached devices */ - for (i = 0; i < ATA_MAX_DEVICES; i++) { - struct ata_device *dev = &ap->device[i]; - unsigned long flags; - - if (!(dev->flags & ATA_DFLAG_DETACHED)) - continue; - - spin_lock_irqsave(ap->lock, flags); - dev->flags &= ~ATA_DFLAG_DETACHED; - spin_unlock_irqrestore(ap->lock, flags); - - ata_scsi_remove_dev(dev); - } + /* Unplug detached devices. We cannot use link iterator here + * because PMP links have to be scanned even if PMP is + * currently not attached. Iterate manually. + */ + ata_scsi_handle_link_detach(&ap->link); + if (ap->pmp_link) + for (i = 0; i < SATA_PMP_MAX_PORTS; i++) + ata_scsi_handle_link_detach(&ap->pmp_link[i]); /* scan for new ones */ ata_scsi_scan_host(ap, 0); @@ -3163,27 +3316,42 @@ static int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel, { struct ata_port *ap = ata_shost_to_port(shost); unsigned long flags; - int rc = 0; + int devno, rc = 0; if (!ap->ops->error_handler) return -EOPNOTSUPP; - if ((channel != SCAN_WILD_CARD && channel != 0) || - (lun != SCAN_WILD_CARD && lun != 0)) + if (lun != SCAN_WILD_CARD && lun) return -EINVAL; + if (ap->nr_pmp_links == 0) { + if (channel != SCAN_WILD_CARD && channel) + return -EINVAL; + devno = id; + } else { + if (id != SCAN_WILD_CARD && id) + return -EINVAL; + devno = channel; + } + spin_lock_irqsave(ap->lock, flags); - if (id == SCAN_WILD_CARD) { - ap->eh_info.probe_mask |= (1 << ATA_MAX_DEVICES) - 1; - ap->eh_info.action |= ATA_EH_SOFTRESET; + if (devno == SCAN_WILD_CARD) { + struct ata_link *link; + + ata_port_for_each_link(link, ap) { + struct ata_eh_info *ehi = &link->eh_info; + ehi->probe_mask |= (1 << ata_link_max_devices(link)) - 1; + ehi->action |= ATA_EH_SOFTRESET; + } } else { - struct ata_device *dev = ata_find_dev(ap, id); + struct ata_device *dev = ata_find_dev(ap, devno); if (dev) { - ap->eh_info.probe_mask |= 1 << dev->devno; - ap->eh_info.action |= ATA_EH_SOFTRESET; - ap->eh_info.flags |= ATA_EHI_RESUME_LINK; + struct ata_eh_info *ehi = &dev->link->eh_info; + ehi->probe_mask |= 1 << dev->devno; + ehi->action |= ATA_EH_SOFTRESET; + ehi->flags |= ATA_EHI_RESUME_LINK; } else rc = -EINVAL; } @@ -3214,24 +3382,26 @@ void ata_scsi_dev_rescan(struct work_struct *work) { struct ata_port *ap = container_of(work, struct ata_port, scsi_rescan_task); + struct ata_link *link; + struct ata_device *dev; unsigned long flags; - unsigned int i; spin_lock_irqsave(ap->lock, flags); - for (i = 0; i < ATA_MAX_DEVICES; i++) { - struct ata_device *dev = &ap->device[i]; - struct scsi_device *sdev = dev->sdev; + ata_port_for_each_link(link, ap) { + ata_link_for_each_dev(dev, link) { + struct scsi_device *sdev = dev->sdev; - if (!ata_dev_enabled(dev) || !sdev) - continue; - if (scsi_device_get(sdev)) - continue; + if (!ata_dev_enabled(dev) || !sdev) + continue; + if (scsi_device_get(sdev)) + continue; - spin_unlock_irqrestore(ap->lock, flags); - scsi_rescan_device(&(sdev->sdev_gendev)); - scsi_device_put(sdev); - spin_lock_irqsave(ap->lock, flags); + spin_unlock_irqrestore(ap->lock, flags); + scsi_rescan_device(&(sdev->sdev_gendev)); + scsi_device_put(sdev); + spin_lock_irqsave(ap->lock, flags); + } } spin_unlock_irqrestore(ap->lock, flags); @@ -3359,7 +3529,7 @@ EXPORT_SYMBOL_GPL(ata_sas_port_destroy); int ata_sas_slave_configure(struct scsi_device *sdev, struct ata_port *ap) { ata_scsi_sdev_config(sdev); - ata_scsi_dev_config(sdev, ap->device); + ata_scsi_dev_config(sdev, ap->link.device); return 0; } EXPORT_SYMBOL_GPL(ata_sas_slave_configure); @@ -3382,8 +3552,8 @@ int ata_sas_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), ata_scsi_dump_cdb(ap, cmd); - if (likely(ata_scsi_dev_enabled(ap->device))) - rc = __ata_scsi_queuecmd(cmd, done, ap->device); + if (likely(ata_scsi_dev_enabled(ap->link.device))) + rc = __ata_scsi_queuecmd(cmd, done, ap->link.device); else { cmd->result = (DID_BAD_TARGET << 16); done(cmd); diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 8023167..026439e 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -64,46 +64,6 @@ u8 ata_irq_on(struct ata_port *ap) return tmp; } -u8 ata_dummy_irq_on (struct ata_port *ap) { return 0; } - -/** - * ata_irq_ack - Acknowledge a device interrupt. - * @ap: Port on which interrupts are enabled. - * - * Wait up to 10 ms for legacy IDE device to become idle (BUSY - * or BUSY+DRQ clear). Obtain dma status and port status from - * device. Clear the interrupt. Return port status. - * - * LOCKING: - */ - -u8 ata_irq_ack(struct ata_port *ap, unsigned int chk_drq) -{ - unsigned int bits = chk_drq ? ATA_BUSY | ATA_DRQ : ATA_BUSY; - u8 host_stat = 0, post_stat = 0, status; - - status = ata_busy_wait(ap, bits, 1000); - if (status & bits) - if (ata_msg_err(ap)) - printk(KERN_ERR "abnormal status 0x%X\n", status); - - if (ap->ioaddr.bmdma_addr) { - /* get controller status; clear intr, err bits */ - host_stat = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); - iowrite8(host_stat | ATA_DMA_INTR | ATA_DMA_ERR, - ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); - - post_stat = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); - } - if (ata_msg_intr(ap)) - printk(KERN_INFO "%s: irq ack: host_stat 0x%X, new host_stat 0x%X, drv_stat 0x%X\n", - __FUNCTION__, - host_stat, post_stat, status); - return status; -} - -u8 ata_dummy_irq_ack(struct ata_port *ap, unsigned int chk_drq) { return 0; } - /** * ata_tf_load - send taskfile registers to host controller * @ap: Port to which output is sent @@ -445,7 +405,7 @@ void ata_bmdma_drive_eh(struct ata_port *ap, ata_prereset_fn_t prereset, unsigned long flags; int thaw = 0; - qc = __ata_qc_from_tag(ap, ap->active_tag); + qc = __ata_qc_from_tag(ap, ap->link.active_tag); if (qc && !(qc->flags & ATA_QCFLAG_FAILED)) qc = NULL; @@ -500,7 +460,7 @@ void ata_bmdma_error_handler(struct ata_port *ap) ata_reset_fn_t hardreset; hardreset = NULL; - if (sata_scr_valid(ap)) + if (sata_scr_valid(&ap->link)) hardreset = sata_std_hardreset; ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset, hardreset, @@ -607,6 +567,9 @@ int ata_pci_init_bmdma(struct ata_host *host) if ((!(ap->flags & ATA_FLAG_IGN_SIMPLEX)) && (ioread8(bmdma + 2) & 0x80)) host->flags |= ATA_HOST_SIMPLEX; + + ata_port_desc(ap, "bmdma 0x%llx", + (unsigned long long)pci_resource_start(pdev, 4) + 8 * i); } return 0; @@ -674,6 +637,10 @@ int ata_pci_init_sff_host(struct ata_host *host) ((unsigned long)iomap[base + 1] | ATA_PCI_CTL_OFS); ata_std_ports(&ap->ioaddr); + ata_port_desc(ap, "cmd 0x%llx ctl 0x%llx", + (unsigned long long)pci_resource_start(pdev, base), + (unsigned long long)pci_resource_start(pdev, base + 1)); + mask |= 1 << i; } @@ -844,24 +811,30 @@ int ata_pci_init_one(struct pci_dev *pdev, IRQF_SHARED, DRV_NAME, host); if (rc) goto err_out; - host->irq = pdev->irq; + + ata_port_desc(host->ports[0], "irq %d", pdev->irq); + ata_port_desc(host->ports[1], "irq %d", pdev->irq); } else { if (!ata_port_is_dummy(host->ports[0])) { - host->irq = ATA_PRIMARY_IRQ(pdev); - rc = devm_request_irq(dev, host->irq, + rc = devm_request_irq(dev, ATA_PRIMARY_IRQ(pdev), pi->port_ops->irq_handler, IRQF_SHARED, DRV_NAME, host); if (rc) goto err_out; + + ata_port_desc(host->ports[0], "irq %d", + ATA_PRIMARY_IRQ(pdev)); } if (!ata_port_is_dummy(host->ports[1])) { - host->irq2 = ATA_SECONDARY_IRQ(pdev); - rc = devm_request_irq(dev, host->irq2, + rc = devm_request_irq(dev, ATA_SECONDARY_IRQ(pdev), pi->port_ops->irq_handler, IRQF_SHARED, DRV_NAME, host); if (rc) goto err_out; + + ata_port_desc(host->ports[1], "irq %d", + ATA_SECONDARY_IRQ(pdev)); } } @@ -909,7 +882,7 @@ unsigned long ata_pci_default_filter(struct ata_device *adev, unsigned long xfer /* Filter out DMA modes if the device has been configured by the BIOS as PIO only */ - if (adev->ap->ioaddr.bmdma_addr == 0) + if (adev->link->ap->ioaddr.bmdma_addr == 0) xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); return xfer_mask; } diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index 564cd23..90df58a 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -29,6 +29,7 @@ #define __LIBATA_H__ #define DRV_NAME "libata" +#define DRV_VERSION "3.00" /* must be exactly four chars */ struct ata_scsi_args { struct ata_device *dev; @@ -56,6 +57,7 @@ extern unsigned int ata_print_id; extern struct workqueue_struct *ata_aux_wq; extern int atapi_enabled; extern int atapi_dmadir; +extern int atapi_passthru16; extern int libata_fua; extern int libata_noacpi; extern struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev); @@ -67,21 +69,23 @@ extern void ata_dev_disable(struct ata_device *dev); extern void ata_port_flush_task(struct ata_port *ap); extern unsigned ata_exec_internal(struct ata_device *dev, struct ata_taskfile *tf, const u8 *cdb, - int dma_dir, void *buf, unsigned int buflen); + int dma_dir, void *buf, unsigned int buflen, + unsigned long timeout); extern unsigned ata_exec_internal_sg(struct ata_device *dev, struct ata_taskfile *tf, const u8 *cdb, int dma_dir, struct scatterlist *sg, - unsigned int n_elem); + unsigned int n_elem, unsigned long timeout); extern unsigned int ata_do_simple_cmd(struct ata_device *dev, u8 cmd); extern int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class, unsigned int flags, u16 *id); extern int ata_dev_reread_id(struct ata_device *dev, unsigned int readid_flags); -extern int ata_dev_revalidate(struct ata_device *dev, unsigned int readid_flags); +extern int ata_dev_revalidate(struct ata_device *dev, unsigned int new_class, + unsigned int readid_flags); extern int ata_dev_configure(struct ata_device *dev); -extern int sata_down_spd_limit(struct ata_port *ap); -extern int sata_set_spd_needed(struct ata_port *ap); +extern int sata_down_spd_limit(struct ata_link *link); +extern int sata_set_spd_needed(struct ata_link *link); extern int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel); -extern int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev); +extern int ata_set_mode(struct ata_link *link, struct ata_device **r_failed_dev); extern void ata_sg_clean(struct ata_queued_cmd *qc); extern void ata_qc_free(struct ata_queued_cmd *qc); extern void ata_qc_issue(struct ata_queued_cmd *qc); @@ -92,17 +96,21 @@ extern void ata_dev_select(struct ata_port *ap, unsigned int device, extern void swap_buf_le16(u16 *buf, unsigned int buf_words); extern int ata_flush_cache(struct ata_device *dev); extern void ata_dev_init(struct ata_device *dev); +extern void ata_link_init(struct ata_port *ap, struct ata_link *link, int pmp); +extern int sata_link_init_spd(struct ata_link *link); extern int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg); extern int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg); extern struct ata_port *ata_port_alloc(struct ata_host *host); /* libata-acpi.c */ #ifdef CONFIG_ATA_ACPI +extern void ata_acpi_associate_sata_port(struct ata_port *ap); extern void ata_acpi_associate(struct ata_host *host); extern int ata_acpi_on_suspend(struct ata_port *ap); extern void ata_acpi_on_resume(struct ata_port *ap); extern int ata_acpi_on_devcfg(struct ata_device *adev); #else +static inline void ata_acpi_associate_sata_port(struct ata_port *ap) { } static inline void ata_acpi_associate(struct ata_host *host) { } static inline int ata_acpi_on_suspend(struct ata_port *ap) { return 0; } static inline void ata_acpi_on_resume(struct ata_port *ap) { } @@ -114,6 +122,7 @@ extern int ata_scsi_add_hosts(struct ata_host *host, struct scsi_host_template *sht); extern void ata_scsi_scan_host(struct ata_port *ap, int sync); extern int ata_scsi_offline_dev(struct ata_device *dev); +extern void ata_scsi_media_change_notify(struct ata_device *dev); extern void ata_scsi_hotplug(struct work_struct *work); extern unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf, unsigned int buflen); @@ -147,12 +156,32 @@ extern void ata_schedule_scsi_eh(struct Scsi_Host *shost); extern void ata_scsi_dev_rescan(struct work_struct *work); extern int ata_bus_probe(struct ata_port *ap); +/* libata-pmp.c */ +extern int sata_pmp_scr_read(struct ata_link *link, int reg, u32 *val); +extern int sata_pmp_scr_write(struct ata_link *link, int reg, u32 val); +extern int sata_pmp_attach(struct ata_device *dev); + /* libata-eh.c */ extern enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd); extern void ata_scsi_error(struct Scsi_Host *host); extern void ata_port_wait_eh(struct ata_port *ap); extern void ata_eh_fastdrain_timerfn(unsigned long arg); extern void ata_qc_schedule_eh(struct ata_queued_cmd *qc); +extern void ata_eh_detach_dev(struct ata_device *dev); +extern void ata_eh_about_to_do(struct ata_link *link, struct ata_device *dev, + unsigned int action); +extern void ata_eh_done(struct ata_link *link, struct ata_device *dev, + unsigned int action); +extern void ata_eh_autopsy(struct ata_port *ap); +extern void ata_eh_report(struct ata_port *ap); +extern int ata_eh_reset(struct ata_link *link, int classify, + ata_prereset_fn_t prereset, ata_reset_fn_t softreset, + ata_reset_fn_t hardreset, ata_postreset_fn_t postreset); +extern int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, + ata_reset_fn_t softreset, ata_reset_fn_t hardreset, + ata_postreset_fn_t postreset, + struct ata_link **r_failed_disk); +extern void ata_eh_finish(struct ata_port *ap); /* libata-sff.c */ extern u8 ata_irq_on(struct ata_port *ap); diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c new file mode 100644 index 0000000..5d3920f --- /dev/null +++ b/drivers/ata/pata_acpi.c @@ -0,0 +1,395 @@ +/* + * ACPI PATA driver + * + * (c) 2007 Red Hat <alan@redhat.com> + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <scsi/scsi_host.h> +#include <acpi/acpi_bus.h> +#include <acpi/acnames.h> +#include <acpi/acnamesp.h> +#include <acpi/acparser.h> +#include <acpi/acexcep.h> +#include <acpi/acmacros.h> +#include <acpi/actypes.h> + +#include <linux/libata.h> +#include <linux/ata.h> + +#define DRV_NAME "pata_acpi" +#define DRV_VERSION "0.2.3" + +struct pata_acpi { + struct ata_acpi_gtm gtm; + void *last; + unsigned long mask[2]; +}; + +/** + * pacpi_pre_reset - check for 40/80 pin + * @ap: Port + * @deadline: deadline jiffies for the operation + * + * Perform the PATA port setup we need. + */ + +static int pacpi_pre_reset(struct ata_link *link, unsigned long deadline) +{ + struct ata_port *ap = link->ap; + struct pata_acpi *acpi = ap->private_data; + if (ap->acpi_handle == NULL || ata_acpi_gtm(ap, &acpi->gtm) < 0) + return -ENODEV; + + return ata_std_prereset(link, deadline); +} + +/** + * pacpi_cable_detect - cable type detection + * @ap: port to detect + * + * Perform device specific cable detection + */ + +static int pacpi_cable_detect(struct ata_port *ap) +{ + struct pata_acpi *acpi = ap->private_data; + + if ((acpi->mask[0] | acpi->mask[1]) & (0xF8 << ATA_SHIFT_UDMA)) + return ATA_CBL_PATA80; + else + return ATA_CBL_PATA40; +} + +/** + * pacpi_error_handler - Setup and error handler + * @ap: Port to handle + * + * LOCKING: + * None (inherited from caller). + */ + +static void pacpi_error_handler(struct ata_port *ap) +{ + return ata_bmdma_drive_eh(ap, pacpi_pre_reset, ata_std_softreset, + NULL, ata_std_postreset); +} + +/* Welcome to ACPI, bring a bucket */ +static const unsigned int pio_cycle[7] = { + 600, 383, 240, 180, 120, 100, 80 +}; +static const unsigned int mwdma_cycle[5] = { + 480, 150, 120, 100, 80 +}; +static const unsigned int udma_cycle[7] = { + 120, 80, 60, 45, 30, 20, 15 +}; + +/** + * pacpi_discover_modes - filter non ACPI modes + * @adev: ATA device + * @mask: proposed modes + * + * Try the modes available and see which ones the ACPI method will + * set up sensibly. From this we get a mask of ACPI modes we can use + */ + +static unsigned long pacpi_discover_modes(struct ata_port *ap, struct ata_device *adev) +{ + int unit = adev->devno; + struct pata_acpi *acpi = ap->private_data; + int i; + u32 t; + unsigned long mask = (0x7f << ATA_SHIFT_UDMA) | (0x7 << ATA_SHIFT_MWDMA) | (0x1F << ATA_SHIFT_PIO); + + struct ata_acpi_gtm probe; + + probe = acpi->gtm; + + /* We always use the 0 slot for crap hardware */ + if (!(probe.flags & 0x10)) + unit = 0; + + ata_acpi_gtm(ap, &probe); + + /* Start by scanning for PIO modes */ + for (i = 0; i < 7; i++) { + t = probe.drive[unit].pio; + if (t <= pio_cycle[i]) { + mask |= (2 << (ATA_SHIFT_PIO + i)) - 1; + break; + } + } + + /* See if we have MWDMA or UDMA data. We don't bother with MWDMA + if UDMA is availabe as this means the BIOS set UDMA and our + error changedown if it works is UDMA to PIO anyway */ + if (probe.flags & (1 << (2 * unit))) { + /* MWDMA */ + for (i = 0; i < 5; i++) { + t = probe.drive[unit].dma; + if (t <= mwdma_cycle[i]) { + mask |= (2 << (ATA_SHIFT_MWDMA + i)) - 1; + break; + } + } + } else { + /* UDMA */ + for (i = 0; i < 7; i++) { + t = probe.drive[unit].dma; + if (t <= udma_cycle[i]) { + mask |= (2 << (ATA_SHIFT_UDMA + i)) - 1; + break; + } + } + } + if (mask & (0xF8 << ATA_SHIFT_UDMA)) + ap->cbl = ATA_CBL_PATA80; + return mask; +} + +/** + * pacpi_mode_filter - mode filter for ACPI + * @adev: device + * @mask: mask of valid modes + * + * Filter the valid mode list according to our own specific rules, in + * this case the list of discovered valid modes obtained by ACPI probing + */ + +static unsigned long pacpi_mode_filter(struct ata_device *adev, unsigned long mask) +{ + struct pata_acpi *acpi = adev->link->ap->private_data; + return ata_pci_default_filter(adev, mask & acpi->mask[adev->devno]); +} + +/** + * pacpi_set_piomode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + */ + +static void pacpi_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + int unit = adev->devno; + struct pata_acpi *acpi = ap->private_data; + + if(!(acpi->gtm.flags & 0x10)) + unit = 0; + + /* Now stuff the nS values into the structure */ + acpi->gtm.drive[unit].pio = pio_cycle[adev->pio_mode - XFER_PIO_0]; + ata_acpi_stm(ap, &acpi->gtm); + /* See what mode we actually got */ + ata_acpi_gtm(ap, &acpi->gtm); +} + +/** + * pacpi_set_dmamode - set initial DMA mode data + * @ap: ATA interface + * @adev: ATA device + */ + +static void pacpi_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + int unit = adev->devno; + struct pata_acpi *acpi = ap->private_data; + + if(!(acpi->gtm.flags & 0x10)) + unit = 0; + + /* Now stuff the nS values into the structure */ + if (adev->dma_mode >= XFER_UDMA_0) { + acpi->gtm.drive[unit].dma = udma_cycle[adev->dma_mode - XFER_UDMA_0]; + acpi->gtm.flags |= (1 << (2 * unit)); + } else { + acpi->gtm.drive[unit].dma = mwdma_cycle[adev->dma_mode - XFER_MW_DMA_0]; + acpi->gtm.flags &= ~(1 << (2 * unit)); + } + ata_acpi_stm(ap, &acpi->gtm); + /* See what mode we actually got */ + ata_acpi_gtm(ap, &acpi->gtm); +} + +/** + * pacpi_qc_issue_prot - command issue + * @qc: command pending + * + * Called when the libata layer is about to issue a command. We wrap + * this interface so that we can load the correct ATA timings if + * neccessary. + */ + +static unsigned int pacpi_qc_issue_prot(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_device *adev = qc->dev; + struct pata_acpi *acpi = ap->private_data; + + if (acpi->gtm.flags & 0x10) + return ata_qc_issue_prot(qc); + + if (adev != acpi->last) { + pacpi_set_piomode(ap, adev); + if (adev->dma_mode) + pacpi_set_dmamode(ap, adev); + acpi->last = adev; + } + return ata_qc_issue_prot(qc); +} + +/** + * pacpi_port_start - port setup + * @ap: ATA port being set up + * + * Use the port_start hook to maintain private control structures + */ + +static int pacpi_port_start(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + struct pata_acpi *acpi; + + int ret; + + if (ap->acpi_handle == NULL) + return -ENODEV; + + acpi = ap->private_data = devm_kzalloc(&pdev->dev, sizeof(struct pata_acpi), GFP_KERNEL); + if (ap->private_data == NULL) + return -ENOMEM; + acpi->mask[0] = pacpi_discover_modes(ap, &ap->link.device[0]); + acpi->mask[1] = pacpi_discover_modes(ap, &ap->link.device[1]); + ret = ata_sff_port_start(ap); + if (ret < 0) + return ret; + + return ret; +} + +static struct scsi_host_template pacpi_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, + /* Use standard CHS mapping rules */ + .bios_param = ata_std_bios_param, +}; + +static const struct ata_port_operations pacpi_ops = { + .set_piomode = pacpi_set_piomode, + .set_dmamode = pacpi_set_dmamode, + .mode_filter = pacpi_mode_filter, + + /* Task file is PCI ATA format, use helpers */ + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = pacpi_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + .cable_detect = pacpi_cable_detect, + + /* BMDMA handling is PCI ATA format, use helpers */ + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = pacpi_qc_issue_prot, + .data_xfer = ata_data_xfer, + + /* Timeout handling */ + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + .irq_on = ata_irq_on, + + /* Generic PATA PCI ATA helpers */ + .port_start = pacpi_port_start, +}; + + +/** + * pacpi_init_one - Register ACPI ATA PCI device with kernel services + * @pdev: PCI device to register + * @ent: Entry in pacpi_pci_tbl matching with @pdev + * + * Called from kernel PCI layer. + * + * LOCKING: + * Inherited from PCI layer (may sleep). + * + * RETURNS: + * Zero on success, or -ERRNO value. + */ + +static int pacpi_init_one (struct pci_dev *pdev, const struct pci_device_id *id) +{ + static const struct ata_port_info info = { + .sht = &pacpi_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x7f, + + .port_ops = &pacpi_ops, + }; + const struct ata_port_info *ppi[] = { &info, NULL }; + return ata_pci_init_one(pdev, ppi); +} + +static const struct pci_device_id pacpi_pci_tbl[] = { + { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL, 1}, + { } /* terminate list */ +}; + +static struct pci_driver pacpi_pci_driver = { + .name = DRV_NAME, + .id_table = pacpi_pci_tbl, + .probe = pacpi_init_one, + .remove = ata_pci_remove_one, + .suspend = ata_pci_device_suspend, + .resume = ata_pci_device_resume, +}; + +static int __init pacpi_init(void) +{ + return pci_register_driver(&pacpi_pci_driver); +} + +static void __exit pacpi_exit(void) +{ + pci_unregister_driver(&pacpi_pci_driver); +} + +module_init(pacpi_init); +module_exit(pacpi_exit); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("SCSI low-level driver for ATA in ACPI mode"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, pacpi_pci_tbl); +MODULE_VERSION(DRV_VERSION); + diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c index 32a10c9..364534e 100644 --- a/drivers/ata/pata_ali.c +++ b/drivers/ata/pata_ali.c @@ -305,7 +305,6 @@ static struct scsi_host_template ali_sht = { */ static struct ata_port_operations ali_early_port_ops = { - .port_disable = ata_port_disable, .set_piomode = ali_set_piomode, .tf_load = ata_tf_load, .tf_read = ata_tf_read, @@ -327,9 +326,8 @@ static struct ata_port_operations ali_early_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; /* @@ -337,8 +335,6 @@ static struct ata_port_operations ali_early_port_ops = { * detect */ static struct ata_port_operations ali_20_port_ops = { - .port_disable = ata_port_disable, - .set_piomode = ali_set_piomode, .set_dmamode = ali_set_dmamode, .mode_filter = ali_20_filter, @@ -369,16 +365,14 @@ static struct ata_port_operations ali_20_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; /* * Port operations for DMA capable ALi with cable detect */ static struct ata_port_operations ali_c2_port_ops = { - .port_disable = ata_port_disable, .set_piomode = ali_set_piomode, .set_dmamode = ali_set_dmamode, .mode_filter = ata_pci_default_filter, @@ -408,16 +402,14 @@ static struct ata_port_operations ali_c2_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; /* * Port operations for DMA capable ALi with cable detect and LBA48 */ static struct ata_port_operations ali_c5_port_ops = { - .port_disable = ata_port_disable, .set_piomode = ali_set_piomode, .set_dmamode = ali_set_dmamode, .mode_filter = ata_pci_default_filter, @@ -446,9 +438,8 @@ static struct ata_port_operations ali_c5_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c index 04048fc..c5779ad 100644 --- a/drivers/ata/pata_amd.c +++ b/drivers/ata/pata_amd.c @@ -119,27 +119,28 @@ static void timing_setup(struct ata_port *ap, struct ata_device *adev, int offse } /** - * amd_probe_init - perform reset handling - * @ap: ATA port + * amd_pre_reset - perform reset handling + * @link: ATA link * @deadline: deadline jiffies for the operation * * Reset sequence checking enable bits to see which ports are * active. */ -static int amd_pre_reset(struct ata_port *ap, unsigned long deadline) +static int amd_pre_reset(struct ata_link *link, unsigned long deadline) { static const struct pci_bits amd_enable_bits[] = { { 0x40, 1, 0x02, 0x02 }, { 0x40, 1, 0x01, 0x01 } }; + struct ata_port *ap = link->ap; struct pci_dev *pdev = to_pci_dev(ap->host->dev); if (!pci_test_config_bits(pdev, &amd_enable_bits[ap->port_no])) return -ENOENT; - return ata_std_prereset(ap, deadline); + return ata_std_prereset(link, deadline); } static void amd_error_handler(struct ata_port *ap) @@ -221,25 +222,26 @@ static void amd133_set_dmamode(struct ata_port *ap, struct ata_device *adev) /** * nv_probe_init - cable detection - * @ap: ATA port + * @lin: ATA link * * Perform cable detection. The BIOS stores this in PCI config * space for us. */ -static int nv_pre_reset(struct ata_port *ap, unsigned long deadline) +static int nv_pre_reset(struct ata_link *link, unsigned long deadline) { static const struct pci_bits nv_enable_bits[] = { { 0x50, 1, 0x02, 0x02 }, { 0x50, 1, 0x01, 0x01 } }; + struct ata_port *ap = link->ap; struct pci_dev *pdev = to_pci_dev(ap->host->dev); if (!pci_test_config_bits(pdev, &nv_enable_bits[ap->port_no])) return -ENOENT; - return ata_std_prereset(ap, deadline); + return ata_std_prereset(link, deadline); } static void nv_error_handler(struct ata_port *ap) @@ -268,6 +270,9 @@ static int nv_cable_detect(struct ata_port *ap) pci_read_config_word(pdev, 0x62 - 2 * ap->port_no, &udma); if ((udma & 0xC4) == 0xC4 || (udma & 0xC400) == 0xC400) cbl = ATA_CBL_PATA80; + /* And a triple check across suspend/resume with ACPI around */ + if (ata_acpi_cbl_80wire(ap)) + cbl = ATA_CBL_PATA80; return cbl; } @@ -327,7 +332,6 @@ static struct scsi_host_template amd_sht = { }; static struct ata_port_operations amd33_port_ops = { - .port_disable = ata_port_disable, .set_piomode = amd33_set_piomode, .set_dmamode = amd33_set_dmamode, .mode_filter = ata_pci_default_filter, @@ -356,13 +360,11 @@ static struct ata_port_operations amd33_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; static struct ata_port_operations amd66_port_ops = { - .port_disable = ata_port_disable, .set_piomode = amd66_set_piomode, .set_dmamode = amd66_set_dmamode, .mode_filter = ata_pci_default_filter, @@ -391,13 +393,11 @@ static struct ata_port_operations amd66_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; static struct ata_port_operations amd100_port_ops = { - .port_disable = ata_port_disable, .set_piomode = amd100_set_piomode, .set_dmamode = amd100_set_dmamode, .mode_filter = ata_pci_default_filter, @@ -426,13 +426,11 @@ static struct ata_port_operations amd100_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; static struct ata_port_operations amd133_port_ops = { - .port_disable = ata_port_disable, .set_piomode = amd133_set_piomode, .set_dmamode = amd133_set_dmamode, .mode_filter = ata_pci_default_filter, @@ -461,13 +459,11 @@ static struct ata_port_operations amd133_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; static struct ata_port_operations nv100_port_ops = { - .port_disable = ata_port_disable, .set_piomode = nv100_set_piomode, .set_dmamode = nv100_set_dmamode, .mode_filter = ata_pci_default_filter, @@ -496,13 +492,11 @@ static struct ata_port_operations nv100_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; static struct ata_port_operations nv133_port_ops = { - .port_disable = ata_port_disable, .set_piomode = nv133_set_piomode, .set_dmamode = nv133_set_dmamode, .mode_filter = ata_pci_default_filter, @@ -531,9 +525,8 @@ static struct ata_port_operations nv133_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id) diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c index b5352eb..d421831 100644 --- a/drivers/ata/pata_artop.c +++ b/drivers/ata/pata_artop.c @@ -40,8 +40,9 @@ static int clock = 0; -static int artop6210_pre_reset(struct ata_port *ap, unsigned long deadline) +static int artop6210_pre_reset(struct ata_link *link, unsigned long deadline) { + struct ata_port *ap = link->ap; struct pci_dev *pdev = to_pci_dev(ap->host->dev); const struct pci_bits artop_enable_bits[] = { { 0x4AU, 1U, 0x02UL, 0x02UL }, /* port 0 */ @@ -51,7 +52,7 @@ static int artop6210_pre_reset(struct ata_port *ap, unsigned long deadline) if (!pci_test_config_bits(pdev, &artop_enable_bits[ap->port_no])) return -ENOENT; - return ata_std_prereset(ap, deadline); + return ata_std_prereset(link, deadline); } /** @@ -71,27 +72,28 @@ static void artop6210_error_handler(struct ata_port *ap) /** * artop6260_pre_reset - check for 40/80 pin - * @ap: Port + * @link: link * @deadline: deadline jiffies for the operation * * The ARTOP hardware reports the cable detect bits in register 0x49. * Nothing complicated needed here. */ -static int artop6260_pre_reset(struct ata_port *ap, unsigned long deadline) +static int artop6260_pre_reset(struct ata_link *link, unsigned long deadline) { static const struct pci_bits artop_enable_bits[] = { { 0x4AU, 1U, 0x02UL, 0x02UL }, /* port 0 */ { 0x4AU, 1U, 0x04UL, 0x04UL }, /* port 1 */ }; + struct ata_port *ap = link->ap; struct pci_dev *pdev = to_pci_dev(ap->host->dev); /* Odd numbered device ids are the units with enable bits (the -R cards) */ if (pdev->device % 1 && !pci_test_config_bits(pdev, &artop_enable_bits[ap->port_no])) return -ENOENT; - return ata_std_prereset(ap, deadline); + return ata_std_prereset(link, deadline); } /** @@ -330,7 +332,6 @@ static struct scsi_host_template artop_sht = { }; static const struct ata_port_operations artop6210_ops = { - .port_disable = ata_port_disable, .set_piomode = artop6210_set_piomode, .set_dmamode = artop6210_set_dmamode, .mode_filter = ata_pci_default_filter, @@ -359,13 +360,11 @@ static const struct ata_port_operations artop6210_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; static const struct ata_port_operations artop6260_ops = { - .port_disable = ata_port_disable, .set_piomode = artop6260_set_piomode, .set_dmamode = artop6260_set_dmamode, @@ -392,9 +391,8 @@ static const struct ata_port_operations artop6260_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; diff --git a/drivers/ata/pata_at32.c b/drivers/ata/pata_at32.c new file mode 100644 index 0000000..bb250a4 --- /dev/null +++ b/drivers/ata/pata_at32.c @@ -0,0 +1,441 @@ +/* + * AVR32 SMC/CFC PATA Driver + * + * Copyright (C) 2007 Atmel Norway + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + */ + +#define DEBUG + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <scsi/scsi_host.h> +#include <linux/ata.h> +#include <linux/libata.h> +#include <linux/err.h> +#include <linux/io.h> + +#include <asm/arch/board.h> +#include <asm/arch/smc.h> + +#define DRV_NAME "pata_at32" +#define DRV_VERSION "0.0.2" + +/* + * CompactFlash controller memory layout relative to the base address: + * + * Attribute memory: 0000 0000 -> 003f ffff + * Common memory: 0040 0000 -> 007f ffff + * I/O memory: 0080 0000 -> 00bf ffff + * True IDE Mode: 00c0 0000 -> 00df ffff + * Alt IDE Mode: 00e0 0000 -> 00ff ffff + * + * Only True IDE and Alt True IDE mode are needed for this driver. + * + * True IDE mode => CS0 = 0, CS1 = 1 (cmd, error, stat, etc) + * Alt True IDE mode => CS0 = 1, CS1 = 0 (ctl, alt_stat) + */ +#define CF_IDE_OFFSET 0x00c00000 +#define CF_ALT_IDE_OFFSET 0x00e00000 +#define CF_RES_SIZE 2048 + +/* + * Define DEBUG_BUS if you are doing debugging of your own EBI -> PATA + * adaptor with a logic analyzer or similar. + */ +#undef DEBUG_BUS + +/* + * ATA PIO modes + * + * Name | Mb/s | Min cycle time | Mask + * --------+-------+----------------+-------- + * Mode 0 | 3.3 | 600 ns | 0x01 + * Mode 1 | 5.2 | 383 ns | 0x03 + * Mode 2 | 8.3 | 240 ns | 0x07 + * Mode 3 | 11.1 | 180 ns | 0x0f + * Mode 4 | 16.7 | 120 ns | 0x1f + */ +#define PIO_MASK (0x1f) + +/* + * Struct containing private information about device. + */ +struct at32_ide_info { + unsigned int irq; + struct resource res_ide; + struct resource res_alt; + void __iomem *ide_addr; + void __iomem *alt_addr; + unsigned int cs; + struct smc_config smc; +}; + +/* + * Setup SMC for the given ATA timing. + */ +static int pata_at32_setup_timing(struct device *dev, + struct at32_ide_info *info, + const struct ata_timing *timing) +{ + /* These two values are found through testing */ + const int min_recover = 25; + const int ncs_hold = 15; + + struct smc_config *smc = &info->smc; + + int active; + int recover; + + /* Total cycle time */ + smc->read_cycle = timing->cyc8b; + + /* DIOR <= CFIOR timings */ + smc->nrd_setup = timing->setup; + smc->nrd_pulse = timing->act8b; + + /* Compute recover, extend total cycle if needed */ + active = smc->nrd_setup + smc->nrd_pulse; + recover = smc->read_cycle - active; + + if (recover < min_recover) { + smc->read_cycle = active + min_recover; + recover = min_recover; + } + + /* (CS0, CS1, DIR, OE) <= (CFCE1, CFCE2, CFRNW, NCSX) timings */ + smc->ncs_read_setup = 0; + smc->ncs_read_pulse = active + ncs_hold; + + /* Write timings same as read timings */ + smc->write_cycle = smc->read_cycle; + smc->nwe_setup = smc->nrd_setup; + smc->nwe_pulse = smc->nrd_pulse; + smc->ncs_write_setup = smc->ncs_read_setup; + smc->ncs_write_pulse = smc->ncs_read_pulse; + + /* Do some debugging output */ + dev_dbg(dev, "SMC: C=%d S=%d P=%d R=%d NCSS=%d NCSP=%d NCSR=%d\n", + smc->read_cycle, smc->nrd_setup, smc->nrd_pulse, + recover, smc->ncs_read_setup, smc->ncs_read_pulse, + smc->read_cycle - smc->ncs_read_pulse); + + /* Finally, configure the SMC */ + return smc_set_configuration(info->cs, smc); +} + +/* + * Procedures for libATA. + */ +static void pata_at32_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct ata_timing timing; + struct at32_ide_info *info = ap->host->private_data; + + int ret; + + /* Compute ATA timing */ + ret = ata_timing_compute(adev, adev->pio_mode, &timing, 1000, 0); + if (ret) { + dev_warn(ap->dev, "Failed to compute ATA timing %d\n", ret); + return; + } + + /* Setup SMC to ATA timing */ + ret = pata_at32_setup_timing(ap->dev, info, &timing); + if (ret) { + dev_warn(ap->dev, "Failed to setup ATA timing %d\n", ret); + return; + } +} + +static void pata_at32_irq_clear(struct ata_port *ap) +{ + /* No DMA controller yet */ +} + +static struct scsi_host_template at32_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations at32_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = pata_at32_set_piomode, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .exec_command = ata_exec_command, + .check_status = ata_check_status, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + .cable_detect = ata_cable_40wire, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + + .data_xfer = ata_data_xfer, + + .irq_clear = pata_at32_irq_clear, + .irq_on = ata_irq_on, + .irq_ack = ata_irq_ack, + + .port_start = ata_sff_port_start, +}; + +static int __init pata_at32_init_one(struct device *dev, + struct at32_ide_info *info) +{ + struct ata_host *host; + struct ata_port *ap; + + host = ata_host_alloc(dev, 1); + if (!host) + return -ENOMEM; + + ap = host->ports[0]; + + /* Setup ATA bindings */ + ap->ops = &at32_port_ops; + ap->pio_mask = PIO_MASK; + ap->flags = ATA_FLAG_MMIO | ATA_FLAG_SLAVE_POSS + | ATA_FLAG_PIO_POLLING; + + /* + * Since all 8-bit taskfile transfers has to go on the lower + * byte of the data bus and there is a bug in the SMC that + * makes it impossible to alter the bus width during runtime, + * we need to hardwire the address signals as follows: + * + * A_IDE(2:0) <= A_EBI(3:1) + * + * This makes all addresses on the EBI even, thus all data + * will be on the lower byte of the data bus. All addresses + * used by libATA need to be altered according to this. + */ + ap->ioaddr.altstatus_addr = info->alt_addr + (0x06 << 1); + ap->ioaddr.ctl_addr = info->alt_addr + (0x06 << 1); + + ap->ioaddr.data_addr = info->ide_addr + (ATA_REG_DATA << 1); + ap->ioaddr.error_addr = info->ide_addr + (ATA_REG_ERR << 1); + ap->ioaddr.feature_addr = info->ide_addr + (ATA_REG_FEATURE << 1); + ap->ioaddr.nsect_addr = info->ide_addr + (ATA_REG_NSECT << 1); + ap->ioaddr.lbal_addr = info->ide_addr + (ATA_REG_LBAL << 1); + ap->ioaddr.lbam_addr = info->ide_addr + (ATA_REG_LBAM << 1); + ap->ioaddr.lbah_addr = info->ide_addr + (ATA_REG_LBAH << 1); + ap->ioaddr.device_addr = info->ide_addr + (ATA_REG_DEVICE << 1); + ap->ioaddr.status_addr = info->ide_addr + (ATA_REG_STATUS << 1); + ap->ioaddr.command_addr = info->ide_addr + (ATA_REG_CMD << 1); + + /* Set info as private data of ATA host */ + host->private_data = info; + + /* Register ATA device and return */ + return ata_host_activate(host, info->irq, ata_interrupt, + IRQF_SHARED | IRQF_TRIGGER_RISING, + &at32_sht); +} + +/* + * This function may come in handy for people analyzing their own + * EBI -> PATA adaptors. + */ +#ifdef DEBUG_BUS + +static void __init pata_at32_debug_bus(struct device *dev, + struct at32_ide_info *info) +{ + const int d1 = 0xff; + const int d2 = 0x00; + + int i; + + /* Write 8-bit values (registers) */ + iowrite8(d1, info->alt_addr + (0x06 << 1)); + iowrite8(d2, info->alt_addr + (0x06 << 1)); + + for (i = 0; i < 8; i++) { + iowrite8(d1, info->ide_addr + (i << 1)); + iowrite8(d2, info->ide_addr + (i << 1)); + } + + /* Write 16 bit values (data) */ + iowrite16(d1, info->ide_addr); + iowrite16(d1 << 8, info->ide_addr); + + iowrite16(d1, info->ide_addr); + iowrite16(d1 << 8, info->ide_addr); +} + +#endif + +static int __init pata_at32_probe(struct platform_device *pdev) +{ + const struct ata_timing initial_timing = + {XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0}; + + struct device *dev = &pdev->dev; + struct at32_ide_info *info; + struct ide_platform_data *board = pdev->dev.platform_data; + struct resource *res; + + int irq; + int ret; + + if (!board) + return -ENXIO; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENXIO; + + /* Retrive IRQ */ + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + /* Setup struct containing private infomation */ + info = kzalloc(sizeof(struct at32_ide_info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + memset(info, 0, sizeof(struct at32_ide_info)); + + info->irq = irq; + info->cs = board->cs; + + /* Request memory resources */ + info->res_ide.start = res->start + CF_IDE_OFFSET; + info->res_ide.end = info->res_ide.start + CF_RES_SIZE - 1; + info->res_ide.name = "ide"; + info->res_ide.flags = IORESOURCE_MEM; + + ret = request_resource(res, &info->res_ide); + if (ret) + goto err_req_res_ide; + + info->res_alt.start = res->start + CF_ALT_IDE_OFFSET; + info->res_alt.end = info->res_alt.start + CF_RES_SIZE - 1; + info->res_alt.name = "alt"; + info->res_alt.flags = IORESOURCE_MEM; + + ret = request_resource(res, &info->res_alt); + if (ret) + goto err_req_res_alt; + + /* Setup non-timing elements of SMC */ + info->smc.bus_width = 2; /* 16 bit data bus */ + info->smc.nrd_controlled = 1; /* Sample data on rising edge of NRD */ + info->smc.nwe_controlled = 0; /* Drive data on falling edge of NCS */ + info->smc.nwait_mode = 3; /* NWAIT is in READY mode */ + info->smc.byte_write = 0; /* Byte select access type */ + info->smc.tdf_mode = 0; /* TDF optimization disabled */ + info->smc.tdf_cycles = 0; /* No TDF wait cycles */ + + /* Setup ATA timing */ + ret = pata_at32_setup_timing(dev, info, &initial_timing); + if (ret) + goto err_setup_timing; + + /* Setup ATA addresses */ + ret = -ENOMEM; + info->ide_addr = devm_ioremap(dev, info->res_ide.start, 16); + info->alt_addr = devm_ioremap(dev, info->res_alt.start, 16); + if (!info->ide_addr || !info->alt_addr) + goto err_ioremap; + +#ifdef DEBUG_BUS + pata_at32_debug_bus(dev, info); +#endif + + /* Register ATA device */ + ret = pata_at32_init_one(dev, info); + if (ret) + goto err_ata_device; + + return 0; + + err_ata_device: + err_ioremap: + err_setup_timing: + release_resource(&info->res_alt); + err_req_res_alt: + release_resource(&info->res_ide); + err_req_res_ide: + kfree(info); + + return ret; +} + +static int __exit pata_at32_remove(struct platform_device *pdev) +{ + struct ata_host *host = platform_get_drvdata(pdev); + struct at32_ide_info *info; + + if (!host) + return 0; + + info = host->private_data; + ata_host_detach(host); + + if (!info) + return 0; + + release_resource(&info->res_ide); + release_resource(&info->res_alt); + + kfree(info); + + return 0; +} + +static struct platform_driver pata_at32_driver = { + .remove = __exit_p(pata_at32_remove), + .driver = { + .name = "at32_ide", + .owner = THIS_MODULE, + }, +}; + +static int __init pata_at32_init(void) +{ + return platform_driver_probe(&pata_at32_driver, pata_at32_probe); +} + +static void __exit pata_at32_exit(void) +{ + platform_driver_unregister(&pata_at32_driver); +} + +module_init(pata_at32_init); +module_exit(pata_at32_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("AVR32 SMC/CFC PATA Driver"); +MODULE_AUTHOR("Kristoffer Nyborg Gregertsen <kngregertsen@norway.atmel.com>"); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c index 86f85a2..9623f52 100644 --- a/drivers/ata/pata_atiixp.c +++ b/drivers/ata/pata_atiixp.c @@ -33,8 +33,9 @@ enum { ATIIXP_IDE_UDMA_MODE = 0x56 }; -static int atiixp_pre_reset(struct ata_port *ap, unsigned long deadline) +static int atiixp_pre_reset(struct ata_link *link, unsigned long deadline) { + struct ata_port *ap = link->ap; static const struct pci_bits atiixp_enable_bits[] = { { 0x48, 1, 0x01, 0x00 }, { 0x48, 1, 0x08, 0x00 } @@ -44,7 +45,7 @@ static int atiixp_pre_reset(struct ata_port *ap, unsigned long deadline) if (!pci_test_config_bits(pdev, &atiixp_enable_bits[ap->port_no])) return -ENOENT; - return ata_std_prereset(ap, deadline); + return ata_std_prereset(link, deadline); } static void atiixp_error_handler(struct ata_port *ap) @@ -172,6 +173,9 @@ static void atiixp_set_dmamode(struct ata_port *ap, struct ata_device *adev) * * When DMA begins we need to ensure that the UDMA control * register for the channel is correctly set. + * + * Note: The host lock held by the libata layer protects + * us from two channels both trying to set DMA bits at once */ static void atiixp_bmdma_start(struct ata_queued_cmd *qc) @@ -198,6 +202,9 @@ static void atiixp_bmdma_start(struct ata_queued_cmd *qc) * * DMA has completed. Clear the UDMA flag as the next operations will * be PIO ones not UDMA data transfer. + * + * Note: The host lock held by the libata layer protects + * us from two channels both trying to set DMA bits at once */ static void atiixp_bmdma_stop(struct ata_queued_cmd *qc) @@ -232,7 +239,6 @@ static struct scsi_host_template atiixp_sht = { }; static struct ata_port_operations atiixp_port_ops = { - .port_disable = ata_port_disable, .set_piomode = atiixp_set_piomode, .set_dmamode = atiixp_set_dmamode, .mode_filter = ata_pci_default_filter, @@ -261,9 +267,8 @@ static struct ata_port_operations atiixp_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; static int atiixp_init_one(struct pci_dev *dev, const struct pci_device_id *id) diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c new file mode 100644 index 0000000..747549e --- /dev/null +++ b/drivers/ata/pata_bf54x.c @@ -0,0 +1,1627 @@ +/* + * File: drivers/ata/pata_bf54x.c + * Author: Sonic Zhang <sonic.zhang@analog.com> + * + * Created: + * Description: PATA Driver for blackfin 54x + * + * Modified: + * Copyright 2007 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <scsi/scsi_host.h> +#include <linux/libata.h> +#include <linux/platform_device.h> +#include <asm/dma.h> +#include <asm/gpio.h> +#include <asm/portmux.h> + +#define DRV_NAME "pata-bf54x" +#define DRV_VERSION "0.9" + +#define ATA_REG_CTRL 0x0E +#define ATA_REG_ALTSTATUS ATA_REG_CTRL + +/* These are the offset of the controller's registers */ +#define ATAPI_OFFSET_CONTROL 0x00 +#define ATAPI_OFFSET_STATUS 0x04 +#define ATAPI_OFFSET_DEV_ADDR 0x08 +#define ATAPI_OFFSET_DEV_TXBUF 0x0c +#define ATAPI_OFFSET_DEV_RXBUF 0x10 +#define ATAPI_OFFSET_INT_MASK 0x14 +#define ATAPI_OFFSET_INT_STATUS 0x18 +#define ATAPI_OFFSET_XFER_LEN 0x1c +#define ATAPI_OFFSET_LINE_STATUS 0x20 +#define ATAPI_OFFSET_SM_STATE 0x24 +#define ATAPI_OFFSET_TERMINATE 0x28 +#define ATAPI_OFFSET_PIO_TFRCNT 0x2c +#define ATAPI_OFFSET_DMA_TFRCNT 0x30 +#define ATAPI_OFFSET_UMAIN_TFRCNT 0x34 +#define ATAPI_OFFSET_UDMAOUT_TFRCNT 0x38 +#define ATAPI_OFFSET_REG_TIM_0 0x40 +#define ATAPI_OFFSET_PIO_TIM_0 0x44 +#define ATAPI_OFFSET_PIO_TIM_1 0x48 +#define ATAPI_OFFSET_MULTI_TIM_0 0x50 +#define ATAPI_OFFSET_MULTI_TIM_1 0x54 +#define ATAPI_OFFSET_MULTI_TIM_2 0x58 +#define ATAPI_OFFSET_ULTRA_TIM_0 0x60 +#define ATAPI_OFFSET_ULTRA_TIM_1 0x64 +#define ATAPI_OFFSET_ULTRA_TIM_2 0x68 +#define ATAPI_OFFSET_ULTRA_TIM_3 0x6c + + +#define ATAPI_GET_CONTROL(base)\ + bfin_read16(base + ATAPI_OFFSET_CONTROL) +#define ATAPI_SET_CONTROL(base, val)\ + bfin_write16(base + ATAPI_OFFSET_CONTROL, val) +#define ATAPI_GET_STATUS(base)\ + bfin_read16(base + ATAPI_OFFSET_STATUS) +#define ATAPI_GET_DEV_ADDR(base)\ + bfin_read16(base + ATAPI_OFFSET_DEV_ADDR) +#define ATAPI_SET_DEV_ADDR(base, val)\ + bfin_write16(base + ATAPI_OFFSET_DEV_ADDR, val) +#define ATAPI_GET_DEV_TXBUF(base)\ + bfin_read16(base + ATAPI_OFFSET_DEV_TXBUF) +#define ATAPI_SET_DEV_TXBUF(base, val)\ + bfin_write16(base + ATAPI_OFFSET_DEV_TXBUF, val) +#define ATAPI_GET_DEV_RXBUF(base)\ + bfin_read16(base + ATAPI_OFFSET_DEV_RXBUF) +#define ATAPI_SET_DEV_RXBUF(base, val)\ + bfin_write16(base + ATAPI_OFFSET_DEV_RXBUF, val) +#define ATAPI_GET_INT_MASK(base)\ + bfin_read16(base + ATAPI_OFFSET_INT_MASK) +#define ATAPI_SET_INT_MASK(base, val)\ + bfin_write16(base + ATAPI_OFFSET_INT_MASK, val) +#define ATAPI_GET_INT_STATUS(base)\ + bfin_read16(base + ATAPI_OFFSET_INT_STATUS) +#define ATAPI_SET_INT_STATUS(base, val)\ + bfin_write16(base + ATAPI_OFFSET_INT_STATUS, val) +#define ATAPI_GET_XFER_LEN(base)\ + bfin_read16(base + ATAPI_OFFSET_XFER_LEN) +#define ATAPI_SET_XFER_LEN(base, val)\ + bfin_write16(base + ATAPI_OFFSET_XFER_LEN, val) +#define ATAPI_GET_LINE_STATUS(base)\ + bfin_read16(base + ATAPI_OFFSET_LINE_STATUS) +#define ATAPI_GET_SM_STATE(base)\ + bfin_read16(base + ATAPI_OFFSET_SM_STATE) +#define ATAPI_GET_TERMINATE(base)\ + bfin_read16(base + ATAPI_OFFSET_TERMINATE) +#define ATAPI_SET_TERMINATE(base, val)\ + bfin_write16(base + ATAPI_OFFSET_TERMINATE, val) +#define ATAPI_GET_PIO_TFRCNT(base)\ + bfin_read16(base + ATAPI_OFFSET_PIO_TFRCNT) +#define ATAPI_GET_DMA_TFRCNT(base)\ + bfin_read16(base + ATAPI_OFFSET_DMA_TFRCNT) +#define ATAPI_GET_UMAIN_TFRCNT(base)\ + bfin_read16(base + ATAPI_OFFSET_UMAIN_TFRCNT) +#define ATAPI_GET_UDMAOUT_TFRCNT(base)\ + bfin_read16(base + ATAPI_OFFSET_UDMAOUT_TFRCNT) +#define ATAPI_GET_REG_TIM_0(base)\ + bfin_read16(base + ATAPI_OFFSET_REG_TIM_0) +#define ATAPI_SET_REG_TIM_0(base, val)\ + bfin_write16(base + ATAPI_OFFSET_REG_TIM_0, val) +#define ATAPI_GET_PIO_TIM_0(base)\ + bfin_read16(base + ATAPI_OFFSET_PIO_TIM_0) +#define ATAPI_SET_PIO_TIM_0(base, val)\ + bfin_write16(base + ATAPI_OFFSET_PIO_TIM_0, val) +#define ATAPI_GET_PIO_TIM_1(base)\ + bfin_read16(base + ATAPI_OFFSET_PIO_TIM_1) +#define ATAPI_SET_PIO_TIM_1(base, val)\ + bfin_write16(base + ATAPI_OFFSET_PIO_TIM_1, val) +#define ATAPI_GET_MULTI_TIM_0(base)\ + bfin_read16(base + ATAPI_OFFSET_MULTI_TIM_0) +#define ATAPI_SET_MULTI_TIM_0(base, val)\ + bfin_write16(base + ATAPI_OFFSET_MULTI_TIM_0, val) +#define ATAPI_GET_MULTI_TIM_1(base)\ + bfin_read16(base + ATAPI_OFFSET_MULTI_TIM_1) +#define ATAPI_SET_MULTI_TIM_1(base, val)\ + bfin_write16(base + ATAPI_OFFSET_MULTI_TIM_1, val) +#define ATAPI_GET_MULTI_TIM_2(base)\ + bfin_read16(base + ATAPI_OFFSET_MULTI_TIM_2) +#define ATAPI_SET_MULTI_TIM_2(base, val)\ + bfin_write16(base + ATAPI_OFFSET_MULTI_TIM_2, val) +#define ATAPI_GET_ULTRA_TIM_0(base)\ + bfin_read16(base + ATAPI_OFFSET_ULTRA_TIM_0) +#define ATAPI_SET_ULTRA_TIM_0(base, val)\ + bfin_write16(base + ATAPI_OFFSET_ULTRA_TIM_0, val) +#define ATAPI_GET_ULTRA_TIM_1(base)\ + bfin_read16(base + ATAPI_OFFSET_ULTRA_TIM_1) +#define ATAPI_SET_ULTRA_TIM_1(base, val)\ + bfin_write16(base + ATAPI_OFFSET_ULTRA_TIM_1, val) +#define ATAPI_GET_ULTRA_TIM_2(base)\ + bfin_read16(base + ATAPI_OFFSET_ULTRA_TIM_2) +#define ATAPI_SET_ULTRA_TIM_2(base, val)\ + bfin_write16(base + ATAPI_OFFSET_ULTRA_TIM_2, val) +#define ATAPI_GET_ULTRA_TIM_3(base)\ + bfin_read16(base + ATAPI_OFFSET_ULTRA_TIM_3) +#define ATAPI_SET_ULTRA_TIM_3(base, val)\ + bfin_write16(base + ATAPI_OFFSET_ULTRA_TIM_3, val) + +/** + * PIO Mode - Frequency compatibility + */ +/* mode: 0 1 2 3 4 */ +static const u32 pio_fsclk[] = +{ 33333333, 33333333, 33333333, 33333333, 33333333 }; + +/** + * MDMA Mode - Frequency compatibility + */ +/* mode: 0 1 2 */ +static const u32 mdma_fsclk[] = { 33333333, 33333333, 33333333 }; + +/** + * UDMA Mode - Frequency compatibility + * + * UDMA5 - 100 MB/s - SCLK = 133 MHz + * UDMA4 - 66 MB/s - SCLK >= 80 MHz + * UDMA3 - 44.4 MB/s - SCLK >= 50 MHz + * UDMA2 - 33 MB/s - SCLK >= 40 MHz + */ +/* mode: 0 1 2 3 4 5 */ +static const u32 udma_fsclk[] = +{ 33333333, 33333333, 40000000, 50000000, 80000000, 133333333 }; + +/** + * Register transfer timing table + */ +/* mode: 0 1 2 3 4 */ +/* Cycle Time */ +static const u32 reg_t0min[] = { 600, 383, 330, 180, 120 }; +/* DIOR/DIOW to end cycle */ +static const u32 reg_t2min[] = { 290, 290, 290, 70, 25 }; +/* DIOR/DIOW asserted pulse width */ +static const u32 reg_teocmin[] = { 290, 290, 290, 80, 70 }; + +/** + * PIO timing table + */ +/* mode: 0 1 2 3 4 */ +/* Cycle Time */ +static const u32 pio_t0min[] = { 600, 383, 240, 180, 120 }; +/* Address valid to DIOR/DIORW */ +static const u32 pio_t1min[] = { 70, 50, 30, 30, 25 }; +/* DIOR/DIOW to end cycle */ +static const u32 pio_t2min[] = { 165, 125, 100, 80, 70 }; +/* DIOR/DIOW asserted pulse width */ +static const u32 pio_teocmin[] = { 165, 125, 100, 70, 25 }; +/* DIOW data hold */ +static const u32 pio_t4min[] = { 30, 20, 15, 10, 10 }; + +/* ****************************************************************** + * Multiword DMA timing table + * ****************************************************************** + */ +/* mode: 0 1 2 */ +/* Cycle Time */ +static const u32 mdma_t0min[] = { 480, 150, 120 }; +/* DIOR/DIOW asserted pulse width */ +static const u32 mdma_tdmin[] = { 215, 80, 70 }; +/* DMACK to read data released */ +static const u32 mdma_thmin[] = { 20, 15, 10 }; +/* DIOR/DIOW to DMACK hold */ +static const u32 mdma_tjmin[] = { 20, 5, 5 }; +/* DIOR negated pulse width */ +static const u32 mdma_tkrmin[] = { 50, 50, 25 }; +/* DIOR negated pulse width */ +static const u32 mdma_tkwmin[] = { 215, 50, 25 }; +/* CS[1:0] valid to DIOR/DIOW */ +static const u32 mdma_tmmin[] = { 50, 30, 25 }; +/* DMACK to read data released */ +static const u32 mdma_tzmax[] = { 20, 25, 25 }; + +/** + * Ultra DMA timing table + */ +/* mode: 0 1 2 3 4 5 */ +static const u32 udma_tcycmin[] = { 112, 73, 54, 39, 25, 17 }; +static const u32 udma_tdvsmin[] = { 70, 48, 31, 20, 7, 5 }; +static const u32 udma_tenvmax[] = { 70, 70, 70, 55, 55, 50 }; +static const u32 udma_trpmin[] = { 160, 125, 100, 100, 100, 85 }; +static const u32 udma_tmin[] = { 5, 5, 5, 5, 3, 3 }; + + +static const u32 udma_tmlimin = 20; +static const u32 udma_tzahmin = 20; +static const u32 udma_tenvmin = 20; +static const u32 udma_tackmin = 20; +static const u32 udma_tssmin = 50; + +/** + * + * Function: num_clocks_min + * + * Description: + * calculate number of SCLK cycles to meet minimum timing + */ +static unsigned short num_clocks_min(unsigned long tmin, + unsigned long fsclk) +{ + unsigned long tmp ; + unsigned short result; + + tmp = tmin * (fsclk/1000/1000) / 1000; + result = (unsigned short)tmp; + if ((tmp*1000*1000) < (tmin*(fsclk/1000))) { + result++; + } + + return result; +} + +/** + * bfin_set_piomode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: um + * + * Set PIO mode for device. + * + * LOCKING: + * None (inherited from caller). + */ + +static void bfin_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + int mode = adev->pio_mode - XFER_PIO_0; + void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; + unsigned int fsclk = get_sclk(); + unsigned short teoc_reg, t2_reg, teoc_pio; + unsigned short t4_reg, t2_pio, t1_reg; + unsigned short n0, n6, t6min = 5; + + /* the most restrictive timing value is t6 and tc, the DIOW - data hold + * If one SCLK pulse is longer than this minimum value then register + * transfers cannot be supported at this frequency. + */ + n6 = num_clocks_min(t6min, fsclk); + if (mode >= 0 && mode <= 4 && n6 >= 1) { + pr_debug("set piomode: mode=%d, fsclk=%ud\n", mode, fsclk); + /* calculate the timing values for register transfers. */ + while (mode > 0 && pio_fsclk[mode] > fsclk) + mode--; + + /* DIOR/DIOW to end cycle time */ + t2_reg = num_clocks_min(reg_t2min[mode], fsclk); + /* DIOR/DIOW asserted pulse width */ + teoc_reg = num_clocks_min(reg_teocmin[mode], fsclk); + /* Cycle Time */ + n0 = num_clocks_min(reg_t0min[mode], fsclk); + + /* increase t2 until we meed the minimum cycle length */ + if (t2_reg + teoc_reg < n0) + t2_reg = n0 - teoc_reg; + + /* calculate the timing values for pio transfers. */ + + /* DIOR/DIOW to end cycle time */ + t2_pio = num_clocks_min(pio_t2min[mode], fsclk); + /* DIOR/DIOW asserted pulse width */ + teoc_pio = num_clocks_min(pio_teocmin[mode], fsclk); + /* Cycle Time */ + n0 = num_clocks_min(pio_t0min[mode], fsclk); + + /* increase t2 until we meed the minimum cycle length */ + if (t2_pio + teoc_pio < n0) + t2_pio = n0 - teoc_pio; + + /* Address valid to DIOR/DIORW */ + t1_reg = num_clocks_min(pio_t1min[mode], fsclk); + + /* DIOW data hold */ + t4_reg = num_clocks_min(pio_t4min[mode], fsclk); + + ATAPI_SET_REG_TIM_0(base, (teoc_reg<<8 | t2_reg)); + ATAPI_SET_PIO_TIM_0(base, (t4_reg<<12 | t2_pio<<4 | t1_reg)); + ATAPI_SET_PIO_TIM_1(base, teoc_pio); + if (mode > 2) { + ATAPI_SET_CONTROL(base, + ATAPI_GET_CONTROL(base) | IORDY_EN); + } else { + ATAPI_SET_CONTROL(base, + ATAPI_GET_CONTROL(base) & ~IORDY_EN); + } + + /* Disable host ATAPI PIO interrupts */ + ATAPI_SET_INT_MASK(base, ATAPI_GET_INT_MASK(base) + & ~(PIO_DONE_MASK | HOST_TERM_XFER_MASK)); + SSYNC(); + } +} + +/** + * bfin_set_dmamode - Initialize host controller PATA DMA timings + * @ap: Port whose timings we are configuring + * @adev: um + * @udma: udma mode, 0 - 6 + * + * Set UDMA mode for device. + * + * LOCKING: + * None (inherited from caller). + */ + +static void bfin_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + int mode; + void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; + unsigned long fsclk = get_sclk(); + unsigned short tenv, tack, tcyc_tdvs, tdvs, tmli, tss, trp, tzah; + unsigned short tm, td, tkr, tkw, teoc, th; + unsigned short n0, nf, tfmin = 5; + unsigned short nmin, tcyc; + + mode = adev->dma_mode - XFER_UDMA_0; + if (mode >= 0 && mode <= 5) { + pr_debug("set udmamode: mode=%d\n", mode); + /* the most restrictive timing value is t6 and tc, + * the DIOW - data hold. If one SCLK pulse is longer + * than this minimum value then register + * transfers cannot be supported at this frequency. + */ + while (mode > 0 && udma_fsclk[mode] > fsclk) + mode--; + + nmin = num_clocks_min(udma_tmin[mode], fsclk); + if (nmin >= 1) { + /* calculate the timing values for Ultra DMA. */ + tdvs = num_clocks_min(udma_tdvsmin[mode], fsclk); + tcyc = num_clocks_min(udma_tcycmin[mode], fsclk); + tcyc_tdvs = 2; + + /* increase tcyc - tdvs (tcyc_tdvs) until we meed + * the minimum cycle length + */ + if (tdvs + tcyc_tdvs < tcyc) + tcyc_tdvs = tcyc - tdvs; + + /* Mow assign the values required for the timing + * registers + */ + if (tcyc_tdvs < 2) + tcyc_tdvs = 2; + + if (tdvs < 2) + tdvs = 2; + + tack = num_clocks_min(udma_tackmin, fsclk); + tss = num_clocks_min(udma_tssmin, fsclk); + tmli = num_clocks_min(udma_tmlimin, fsclk); + tzah = num_clocks_min(udma_tzahmin, fsclk); + trp = num_clocks_min(udma_trpmin[mode], fsclk); + tenv = num_clocks_min(udma_tenvmin, fsclk); + if (tenv <= udma_tenvmax[mode]) { + ATAPI_SET_ULTRA_TIM_0(base, (tenv<<8 | tack)); + ATAPI_SET_ULTRA_TIM_1(base, + (tcyc_tdvs<<8 | tdvs)); + ATAPI_SET_ULTRA_TIM_2(base, (tmli<<8 | tss)); + ATAPI_SET_ULTRA_TIM_3(base, (trp<<8 | tzah)); + + /* Enable host ATAPI Untra DMA interrupts */ + ATAPI_SET_INT_MASK(base, + ATAPI_GET_INT_MASK(base) + | UDMAIN_DONE_MASK + | UDMAOUT_DONE_MASK + | UDMAIN_TERM_MASK + | UDMAOUT_TERM_MASK); + } + } + } + + mode = adev->dma_mode - XFER_MW_DMA_0; + if (mode >= 0 && mode <= 2) { + pr_debug("set mdmamode: mode=%d\n", mode); + /* the most restrictive timing value is tf, the DMACK to + * read data released. If one SCLK pulse is longer than + * this maximum value then the MDMA mode + * cannot be supported at this frequency. + */ + while (mode > 0 && mdma_fsclk[mode] > fsclk) + mode--; + + nf = num_clocks_min(tfmin, fsclk); + if (nf >= 1) { + /* calculate the timing values for Multi-word DMA. */ + + /* DIOR/DIOW asserted pulse width */ + td = num_clocks_min(mdma_tdmin[mode], fsclk); + + /* DIOR negated pulse width */ + tkw = num_clocks_min(mdma_tkwmin[mode], fsclk); + + /* Cycle Time */ + n0 = num_clocks_min(mdma_t0min[mode], fsclk); + + /* increase tk until we meed the minimum cycle length */ + if (tkw + td < n0) + tkw = n0 - td; + + /* DIOR negated pulse width - read */ + tkr = num_clocks_min(mdma_tkrmin[mode], fsclk); + /* CS{1:0] valid to DIOR/DIOW */ + tm = num_clocks_min(mdma_tmmin[mode], fsclk); + /* DIOR/DIOW to DMACK hold */ + teoc = num_clocks_min(mdma_tjmin[mode], fsclk); + /* DIOW Data hold */ + th = num_clocks_min(mdma_thmin[mode], fsclk); + + ATAPI_SET_MULTI_TIM_0(base, (tm<<8 | td)); + ATAPI_SET_MULTI_TIM_1(base, (tkr<<8 | tkw)); + ATAPI_SET_MULTI_TIM_2(base, (teoc<<8 | th)); + + /* Enable host ATAPI Multi DMA interrupts */ + ATAPI_SET_INT_MASK(base, ATAPI_GET_INT_MASK(base) + | MULTI_DONE_MASK | MULTI_TERM_MASK); + SSYNC(); + } + } + return; +} + +/** + * + * Function: wait_complete + * + * Description: Waits the interrupt from device + * + */ +static inline void wait_complete(void __iomem *base, unsigned short mask) +{ + unsigned short status; + unsigned int i = 0; + +#define PATA_BF54X_WAIT_TIMEOUT 10000 + + for (i = 0; i < PATA_BF54X_WAIT_TIMEOUT; i++) { + status = ATAPI_GET_INT_STATUS(base) & mask; + if (status) + break; + } + + ATAPI_SET_INT_STATUS(base, mask); +} + +/** + * + * Function: write_atapi_register + * + * Description: Writes to ATA Device Resgister + * + */ + +static void write_atapi_register(void __iomem *base, + unsigned long ata_reg, unsigned short value) +{ + /* Program the ATA_DEV_TXBUF register with write data (to be + * written into the device). + */ + ATAPI_SET_DEV_TXBUF(base, value); + + /* Program the ATA_DEV_ADDR register with address of the + * device register (0x01 to 0x0F). + */ + ATAPI_SET_DEV_ADDR(base, ata_reg); + + /* Program the ATA_CTRL register with dir set to write (1) + */ + ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) | XFER_DIR)); + + /* ensure PIO DMA is not set */ + ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) & ~PIO_USE_DMA)); + + /* and start the transfer */ + ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) | PIO_START)); + + /* Wait for the interrupt to indicate the end of the transfer. + * (We need to wait on and clear rhe ATA_DEV_INT interrupt status) + */ + wait_complete(base, PIO_DONE_INT); +} + +/** + * + * Function: read_atapi_register + * + *Description: Reads from ATA Device Resgister + * + */ + +static unsigned short read_atapi_register(void __iomem *base, + unsigned long ata_reg) +{ + /* Program the ATA_DEV_ADDR register with address of the + * device register (0x01 to 0x0F). + */ + ATAPI_SET_DEV_ADDR(base, ata_reg); + + /* Program the ATA_CTRL register with dir set to read (0) and + */ + ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) & ~XFER_DIR)); + + /* ensure PIO DMA is not set */ + ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) & ~PIO_USE_DMA)); + + /* and start the transfer */ + ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) | PIO_START)); + + /* Wait for the interrupt to indicate the end of the transfer. + * (PIO_DONE interrupt is set and it doesn't seem to matter + * that we don't clear it) + */ + wait_complete(base, PIO_DONE_INT); + + /* Read the ATA_DEV_RXBUF register with write data (to be + * written into the device). + */ + return ATAPI_GET_DEV_RXBUF(base); +} + +/** + * + * Function: write_atapi_register_data + * + * Description: Writes to ATA Device Resgister + * + */ + +static void write_atapi_data(void __iomem *base, + int len, unsigned short *buf) +{ + int i; + + /* Set transfer length to 1 */ + ATAPI_SET_XFER_LEN(base, 1); + + /* Program the ATA_DEV_ADDR register with address of the + * ATA_REG_DATA + */ + ATAPI_SET_DEV_ADDR(base, ATA_REG_DATA); + + /* Program the ATA_CTRL register with dir set to write (1) + */ + ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) | XFER_DIR)); + + /* ensure PIO DMA is not set */ + ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) & ~PIO_USE_DMA)); + + for (i = 0; i < len; i++) { + /* Program the ATA_DEV_TXBUF register with write data (to be + * written into the device). + */ + ATAPI_SET_DEV_TXBUF(base, buf[i]); + + /* and start the transfer */ + ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) | PIO_START)); + + /* Wait for the interrupt to indicate the end of the transfer. + * (We need to wait on and clear rhe ATA_DEV_INT + * interrupt status) + */ + wait_complete(base, PIO_DONE_INT); + } +} + +/** + * + * Function: read_atapi_register_data + * + * Description: Reads from ATA Device Resgister + * + */ + +static void read_atapi_data(void __iomem *base, + int len, unsigned short *buf) +{ + int i; + + /* Set transfer length to 1 */ + ATAPI_SET_XFER_LEN(base, 1); + + /* Program the ATA_DEV_ADDR register with address of the + * ATA_REG_DATA + */ + ATAPI_SET_DEV_ADDR(base, ATA_REG_DATA); + + /* Program the ATA_CTRL register with dir set to read (0) and + */ + ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) & ~XFER_DIR)); + + /* ensure PIO DMA is not set */ + ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) & ~PIO_USE_DMA)); + + for (i = 0; i < len; i++) { + /* and start the transfer */ + ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) | PIO_START)); + + /* Wait for the interrupt to indicate the end of the transfer. + * (PIO_DONE interrupt is set and it doesn't seem to matter + * that we don't clear it) + */ + wait_complete(base, PIO_DONE_INT); + + /* Read the ATA_DEV_RXBUF register with write data (to be + * written into the device). + */ + buf[i] = ATAPI_GET_DEV_RXBUF(base); + } +} + +/** + * bfin_tf_load - send taskfile registers to host controller + * @ap: Port to which output is sent + * @tf: ATA taskfile register set + * + * Note: Original code is ata_tf_load(). + */ + +static void bfin_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) +{ + void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; + unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; + + if (tf->ctl != ap->last_ctl) { + write_atapi_register(base, ATA_REG_CTRL, tf->ctl); + ap->last_ctl = tf->ctl; + ata_wait_idle(ap); + } + + if (is_addr) { + if (tf->flags & ATA_TFLAG_LBA48) { + write_atapi_register(base, ATA_REG_FEATURE, + tf->hob_feature); + write_atapi_register(base, ATA_REG_NSECT, + tf->hob_nsect); + write_atapi_register(base, ATA_REG_LBAL, tf->hob_lbal); + write_atapi_register(base, ATA_REG_LBAM, tf->hob_lbam); + write_atapi_register(base, ATA_REG_LBAH, tf->hob_lbah); + pr_debug("hob: feat 0x%X nsect 0x%X, lba 0x%X " + "0x%X 0x%X\n", + tf->hob_feature, + tf->hob_nsect, + tf->hob_lbal, + tf->hob_lbam, + tf->hob_lbah); + } + + write_atapi_register(base, ATA_REG_FEATURE, tf->feature); + write_atapi_register(base, ATA_REG_NSECT, tf->nsect); + write_atapi_register(base, ATA_REG_LBAL, tf->lbal); + write_atapi_register(base, ATA_REG_LBAM, tf->lbam); + write_atapi_register(base, ATA_REG_LBAH, tf->lbah); + pr_debug("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n", + tf->feature, + tf->nsect, + tf->lbal, + tf->lbam, + tf->lbah); + } + + if (tf->flags & ATA_TFLAG_DEVICE) { + write_atapi_register(base, ATA_REG_DEVICE, tf->device); + pr_debug("device 0x%X\n", tf->device); + } + + ata_wait_idle(ap); +} + +/** + * bfin_check_status - Read device status reg & clear interrupt + * @ap: port where the device is + * + * Note: Original code is ata_check_status(). + */ + +static u8 bfin_check_status(struct ata_port *ap) +{ + void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; + return read_atapi_register(base, ATA_REG_STATUS); +} + +/** + * bfin_tf_read - input device's ATA taskfile shadow registers + * @ap: Port from which input is read + * @tf: ATA taskfile register set for storing input + * + * Note: Original code is ata_tf_read(). + */ + +static void bfin_tf_read(struct ata_port *ap, struct ata_taskfile *tf) +{ + void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; + + tf->command = bfin_check_status(ap); + tf->feature = read_atapi_register(base, ATA_REG_ERR); + tf->nsect = read_atapi_register(base, ATA_REG_NSECT); + tf->lbal = read_atapi_register(base, ATA_REG_LBAL); + tf->lbam = read_atapi_register(base, ATA_REG_LBAM); + tf->lbah = read_atapi_register(base, ATA_REG_LBAH); + tf->device = read_atapi_register(base, ATA_REG_DEVICE); + + if (tf->flags & ATA_TFLAG_LBA48) { + write_atapi_register(base, ATA_REG_CTRL, tf->ctl | ATA_HOB); + tf->hob_feature = read_atapi_register(base, ATA_REG_ERR); + tf->hob_nsect = read_atapi_register(base, ATA_REG_NSECT); + tf->hob_lbal = read_atapi_register(base, ATA_REG_LBAL); + tf->hob_lbam = read_atapi_register(base, ATA_REG_LBAM); + tf->hob_lbah = read_atapi_register(base, ATA_REG_LBAH); + } +} + +/** + * bfin_exec_command - issue ATA command to host controller + * @ap: port to which command is being issued + * @tf: ATA taskfile register set + * + * Note: Original code is ata_exec_command(). + */ + +static void bfin_exec_command(struct ata_port *ap, + const struct ata_taskfile *tf) +{ + void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; + pr_debug("ata%u: cmd 0x%X\n", ap->print_id, tf->command); + + write_atapi_register(base, ATA_REG_CMD, tf->command); + ata_pause(ap); +} + +/** + * bfin_check_altstatus - Read device alternate status reg + * @ap: port where the device is + */ + +static u8 bfin_check_altstatus(struct ata_port *ap) +{ + void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; + return read_atapi_register(base, ATA_REG_ALTSTATUS); +} + +/** + * bfin_std_dev_select - Select device 0/1 on ATA bus + * @ap: ATA channel to manipulate + * @device: ATA device (numbered from zero) to select + * + * Note: Original code is ata_std_dev_select(). + */ + +static void bfin_std_dev_select(struct ata_port *ap, unsigned int device) +{ + void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; + u8 tmp; + + if (device == 0) + tmp = ATA_DEVICE_OBS; + else + tmp = ATA_DEVICE_OBS | ATA_DEV1; + + write_atapi_register(base, ATA_REG_DEVICE, tmp); + ata_pause(ap); +} + +/** + * bfin_bmdma_setup - Set up IDE DMA transaction + * @qc: Info associated with this ATA transaction. + * + * Note: Original code is ata_bmdma_setup(). + */ + +static void bfin_bmdma_setup(struct ata_queued_cmd *qc) +{ + unsigned short config = WDSIZE_16; + struct scatterlist *sg; + + pr_debug("in atapi dma setup\n"); + /* Program the ATA_CTRL register with dir */ + if (qc->tf.flags & ATA_TFLAG_WRITE) { + /* fill the ATAPI DMA controller */ + set_dma_config(CH_ATAPI_TX, config); + set_dma_x_modify(CH_ATAPI_TX, 2); + ata_for_each_sg(sg, qc) { + set_dma_start_addr(CH_ATAPI_TX, sg_dma_address(sg)); + set_dma_x_count(CH_ATAPI_TX, sg_dma_len(sg) >> 1); + } + } else { + config |= WNR; + /* fill the ATAPI DMA controller */ + set_dma_config(CH_ATAPI_RX, config); + set_dma_x_modify(CH_ATAPI_RX, 2); + ata_for_each_sg(sg, qc) { + set_dma_start_addr(CH_ATAPI_RX, sg_dma_address(sg)); + set_dma_x_count(CH_ATAPI_RX, sg_dma_len(sg) >> 1); + } + } +} + +/** + * bfin_bmdma_start - Start an IDE DMA transaction + * @qc: Info associated with this ATA transaction. + * + * Note: Original code is ata_bmdma_start(). + */ + +static void bfin_bmdma_start(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; + struct scatterlist *sg; + + pr_debug("in atapi dma start\n"); + if (!(ap->udma_mask || ap->mwdma_mask)) + return; + + /* start ATAPI DMA controller*/ + if (qc->tf.flags & ATA_TFLAG_WRITE) { + /* + * On blackfin arch, uncacheable memory is not + * allocated with flag GFP_DMA. DMA buffer from + * common kenel code should be flushed if WB + * data cache is enabled. Otherwise, this loop + * is an empty loop and optimized out. + */ + ata_for_each_sg(sg, qc) { + flush_dcache_range(sg_dma_address(sg), + sg_dma_address(sg) + sg_dma_len(sg)); + } + enable_dma(CH_ATAPI_TX); + pr_debug("enable udma write\n"); + + /* Send ATA DMA write command */ + bfin_exec_command(ap, &qc->tf); + + /* set ATA DMA write direction */ + ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) + | XFER_DIR)); + } else { + enable_dma(CH_ATAPI_RX); + pr_debug("enable udma read\n"); + + /* Send ATA DMA read command */ + bfin_exec_command(ap, &qc->tf); + + /* set ATA DMA read direction */ + ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) + & ~XFER_DIR)); + } + + /* Reset all transfer count */ + ATAPI_SET_CONTROL(base, ATAPI_GET_CONTROL(base) | TFRCNT_RST); + + /* Set transfer length to buffer len */ + ata_for_each_sg(sg, qc) { + ATAPI_SET_XFER_LEN(base, (sg_dma_len(sg) >> 1)); + } + + /* Enable ATA DMA operation*/ + if (ap->udma_mask) + ATAPI_SET_CONTROL(base, ATAPI_GET_CONTROL(base) + | ULTRA_START); + else + ATAPI_SET_CONTROL(base, ATAPI_GET_CONTROL(base) + | MULTI_START); +} + +/** + * bfin_bmdma_stop - Stop IDE DMA transfer + * @qc: Command we are ending DMA for + */ + +static void bfin_bmdma_stop(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct scatterlist *sg; + + pr_debug("in atapi dma stop\n"); + if (!(ap->udma_mask || ap->mwdma_mask)) + return; + + /* stop ATAPI DMA controller*/ + if (qc->tf.flags & ATA_TFLAG_WRITE) + disable_dma(CH_ATAPI_TX); + else { + disable_dma(CH_ATAPI_RX); + if (ap->hsm_task_state & HSM_ST_LAST) { + /* + * On blackfin arch, uncacheable memory is not + * allocated with flag GFP_DMA. DMA buffer from + * common kenel code should be invalidated if + * data cache is enabled. Otherwise, this loop + * is an empty loop and optimized out. + */ + ata_for_each_sg(sg, qc) { + invalidate_dcache_range( + sg_dma_address(sg), + sg_dma_address(sg) + + sg_dma_len(sg)); + } + } + } +} + +/** + * bfin_devchk - PATA device presence detection + * @ap: ATA channel to examine + * @device: Device to examine (starting at zero) + * + * Note: Original code is ata_devchk(). + */ + +static unsigned int bfin_devchk(struct ata_port *ap, + unsigned int device) +{ + void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; + u8 nsect, lbal; + + bfin_std_dev_select(ap, device); + + write_atapi_register(base, ATA_REG_NSECT, 0x55); + write_atapi_register(base, ATA_REG_LBAL, 0xaa); + + write_atapi_register(base, ATA_REG_NSECT, 0xaa); + write_atapi_register(base, ATA_REG_LBAL, 0x55); + + write_atapi_register(base, ATA_REG_NSECT, 0x55); + write_atapi_register(base, ATA_REG_LBAL, 0xaa); + + nsect = read_atapi_register(base, ATA_REG_NSECT); + lbal = read_atapi_register(base, ATA_REG_LBAL); + + if ((nsect == 0x55) && (lbal == 0xaa)) + return 1; /* we found a device */ + + return 0; /* nothing found */ +} + +/** + * bfin_bus_post_reset - PATA device post reset + * + * Note: Original code is ata_bus_post_reset(). + */ + +static void bfin_bus_post_reset(struct ata_port *ap, unsigned int devmask) +{ + void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; + unsigned int dev0 = devmask & (1 << 0); + unsigned int dev1 = devmask & (1 << 1); + unsigned long timeout; + + /* if device 0 was found in ata_devchk, wait for its + * BSY bit to clear + */ + if (dev0) + ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); + + /* if device 1 was found in ata_devchk, wait for + * register access, then wait for BSY to clear + */ + timeout = jiffies + ATA_TMOUT_BOOT; + while (dev1) { + u8 nsect, lbal; + + bfin_std_dev_select(ap, 1); + nsect = read_atapi_register(base, ATA_REG_NSECT); + lbal = read_atapi_register(base, ATA_REG_LBAL); + if ((nsect == 1) && (lbal == 1)) + break; + if (time_after(jiffies, timeout)) { + dev1 = 0; + break; + } + msleep(50); /* give drive a breather */ + } + if (dev1) + ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); + + /* is all this really necessary? */ + bfin_std_dev_select(ap, 0); + if (dev1) + bfin_std_dev_select(ap, 1); + if (dev0) + bfin_std_dev_select(ap, 0); +} + +/** + * bfin_bus_softreset - PATA device software reset + * + * Note: Original code is ata_bus_softreset(). + */ + +static unsigned int bfin_bus_softreset(struct ata_port *ap, + unsigned int devmask) +{ + void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; + + /* software reset. causes dev0 to be selected */ + write_atapi_register(base, ATA_REG_CTRL, ap->ctl); + udelay(20); + write_atapi_register(base, ATA_REG_CTRL, ap->ctl | ATA_SRST); + udelay(20); + write_atapi_register(base, ATA_REG_CTRL, ap->ctl); + + /* spec mandates ">= 2ms" before checking status. + * We wait 150ms, because that was the magic delay used for + * ATAPI devices in Hale Landis's ATADRVR, for the period of time + * between when the ATA command register is written, and then + * status is checked. Because waiting for "a while" before + * checking status is fine, post SRST, we perform this magic + * delay here as well. + * + * Old drivers/ide uses the 2mS rule and then waits for ready + */ + msleep(150); + + /* Before we perform post reset processing we want to see if + * the bus shows 0xFF because the odd clown forgets the D7 + * pulldown resistor. + */ + if (bfin_check_status(ap) == 0xFF) + return 0; + + bfin_bus_post_reset(ap, devmask); + + return 0; +} + +/** + * bfin_std_softreset - reset host port via ATA SRST + * @ap: port to reset + * @classes: resulting classes of attached devices + * + * Note: Original code is ata_std_softreset(). + */ + +static int bfin_std_softreset(struct ata_port *ap, unsigned int *classes, + unsigned long deadline) +{ + unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS; + unsigned int devmask = 0, err_mask; + u8 err; + + if (ata_port_offline(ap)) { + classes[0] = ATA_DEV_NONE; + goto out; + } + + /* determine if device 0/1 are present */ + if (bfin_devchk(ap, 0)) + devmask |= (1 << 0); + if (slave_possible && bfin_devchk(ap, 1)) + devmask |= (1 << 1); + + /* select device 0 again */ + bfin_std_dev_select(ap, 0); + + /* issue bus reset */ + err_mask = bfin_bus_softreset(ap, devmask); + if (err_mask) { + ata_port_printk(ap, KERN_ERR, "SRST failed (err_mask=0x%x)\n", + err_mask); + return -EIO; + } + + /* determine by signature whether we have ATA or ATAPI devices */ + classes[0] = ata_dev_try_classify(ap, 0, &err); + if (slave_possible && err != 0x81) + classes[1] = ata_dev_try_classify(ap, 1, &err); + + out: + return 0; +} + +/** + * bfin_bmdma_status - Read IDE DMA status + * @ap: Port associated with this ATA transaction. + */ + +static unsigned char bfin_bmdma_status(struct ata_port *ap) +{ + unsigned char host_stat = 0; + void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; + unsigned short int_status = ATAPI_GET_INT_STATUS(base); + + if (ATAPI_GET_STATUS(base) & (MULTI_XFER_ON|ULTRA_XFER_ON)) { + host_stat = ATA_DMA_ACTIVE; + } + if (int_status & (MULTI_DONE_INT|UDMAIN_DONE_INT|UDMAOUT_DONE_INT)) { + host_stat = ATA_DMA_INTR; + } + if (int_status & (MULTI_TERM_INT|UDMAIN_TERM_INT|UDMAOUT_TERM_INT)) { + host_stat = ATA_DMA_ERR; + } + + return host_stat; +} + +/** + * bfin_data_xfer - Transfer data by PIO + * @adev: device for this I/O + * @buf: data buffer + * @buflen: buffer length + * @write_data: read/write + * + * Note: Original code is ata_data_xfer(). + */ + +static void bfin_data_xfer(struct ata_device *adev, unsigned char *buf, + unsigned int buflen, int write_data) +{ + struct ata_port *ap = adev->ap; + unsigned int words = buflen >> 1; + unsigned short *buf16 = (u16 *) buf; + void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; + + /* Transfer multiple of 2 bytes */ + if (write_data) { + write_atapi_data(base, words, buf16); + } else { + read_atapi_data(base, words, buf16); + } + + /* Transfer trailing 1 byte, if any. */ + if (unlikely(buflen & 0x01)) { + unsigned short align_buf[1] = { 0 }; + unsigned char *trailing_buf = buf + buflen - 1; + + if (write_data) { + memcpy(align_buf, trailing_buf, 1); + write_atapi_data(base, 1, align_buf); + } else { + read_atapi_data(base, 1, align_buf); + memcpy(trailing_buf, align_buf, 1); + } + } +} + +/** + * bfin_irq_clear - Clear ATAPI interrupt. + * @ap: Port associated with this ATA transaction. + * + * Note: Original code is ata_bmdma_irq_clear(). + */ + +static void bfin_irq_clear(struct ata_port *ap) +{ + void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; + + pr_debug("in atapi irq clear\n"); + ATAPI_SET_INT_STATUS(base, 0x1FF); +} + +/** + * bfin_irq_on - Enable interrupts on a port. + * @ap: Port on which interrupts are enabled. + * + * Note: Original code is ata_irq_on(). + */ + +static unsigned char bfin_irq_on(struct ata_port *ap) +{ + void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; + u8 tmp; + + pr_debug("in atapi irq on\n"); + ap->ctl &= ~ATA_NIEN; + ap->last_ctl = ap->ctl; + + write_atapi_register(base, ATA_REG_CTRL, ap->ctl); + tmp = ata_wait_idle(ap); + + bfin_irq_clear(ap); + + return tmp; +} + +/** + * bfin_irq_ack - Acknowledge a device interrupt. + * @ap: Port on which interrupts are enabled. + * + * Note: Original code is ata_irq_ack(). + */ + +static unsigned char bfin_irq_ack(struct ata_port *ap, unsigned int chk_drq) +{ + void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; + unsigned int bits = chk_drq ? ATA_BUSY | ATA_DRQ : ATA_BUSY; + unsigned char status; + + pr_debug("in atapi irq ack\n"); + status = ata_busy_wait(ap, bits, 1000); + if (status & bits) + if (ata_msg_err(ap)) + dev_err(ap->dev, "abnormal status 0x%X\n", status); + + /* get controller status; clear intr, err bits */ + ATAPI_SET_INT_STATUS(base, ATAPI_GET_INT_STATUS(base)|ATAPI_DEV_INT + | MULTI_DONE_INT | UDMAIN_DONE_INT | UDMAOUT_DONE_INT + | MULTI_TERM_INT | UDMAIN_TERM_INT | UDMAOUT_TERM_INT); + + return bfin_bmdma_status(ap); +} + +/** + * bfin_bmdma_freeze - Freeze DMA controller port + * @ap: port to freeze + * + * Note: Original code is ata_bmdma_freeze(). + */ + +static void bfin_bmdma_freeze(struct ata_port *ap) +{ + void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; + + pr_debug("in atapi dma freeze\n"); + ap->ctl |= ATA_NIEN; + ap->last_ctl = ap->ctl; + + write_atapi_register(base, ATA_REG_CTRL, ap->ctl); + + /* Under certain circumstances, some controllers raise IRQ on + * ATA_NIEN manipulation. Also, many controllers fail to mask + * previously pending IRQ on ATA_NIEN assertion. Clear it. + */ + ata_chk_status(ap); + + bfin_irq_clear(ap); +} + +/** + * bfin_bmdma_thaw - Thaw DMA controller port + * @ap: port to thaw + * + * Note: Original code is ata_bmdma_thaw(). + */ + +void bfin_bmdma_thaw(struct ata_port *ap) +{ + bfin_check_status(ap); + bfin_irq_clear(ap); + bfin_irq_on(ap); +} + +/** + * bfin_std_postreset - standard postreset callback + * @ap: the target ata_port + * @classes: classes of attached devices + * + * Note: Original code is ata_std_postreset(). + */ + +static void bfin_std_postreset(struct ata_port *ap, unsigned int *classes) +{ + void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; + + /* re-enable interrupts */ + bfin_irq_on(ap); + + /* is double-select really necessary? */ + if (classes[0] != ATA_DEV_NONE) + bfin_std_dev_select(ap, 1); + if (classes[1] != ATA_DEV_NONE) + bfin_std_dev_select(ap, 0); + + /* bail out if no device is present */ + if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) { + return; + } + + /* set up device control */ + write_atapi_register(base, ATA_REG_CTRL, ap->ctl); +} + +/** + * bfin_error_handler - Stock error handler for DMA controller + * @ap: port to handle error for + */ + +static void bfin_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, ata_std_prereset, bfin_std_softreset, NULL, + bfin_std_postreset); +} + +static void bfin_port_stop(struct ata_port *ap) +{ + pr_debug("in atapi port stop\n"); + if (ap->udma_mask != 0 || ap->mwdma_mask != 0) { + free_dma(CH_ATAPI_RX); + free_dma(CH_ATAPI_TX); + } +} + +static int bfin_port_start(struct ata_port *ap) +{ + pr_debug("in atapi port start\n"); + if (!(ap->udma_mask || ap->mwdma_mask)) + return 0; + + if (request_dma(CH_ATAPI_RX, "BFIN ATAPI RX DMA") >= 0) { + if (request_dma(CH_ATAPI_TX, + "BFIN ATAPI TX DMA") >= 0) + return 0; + + free_dma(CH_ATAPI_RX); + } + + ap->udma_mask = 0; + ap->mwdma_mask = 0; + dev_err(ap->dev, "Unable to request ATAPI DMA!" + " Continue in PIO mode.\n"); + + return 0; +} + +static struct scsi_host_template bfin_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = SG_NONE, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, + .bios_param = ata_std_bios_param, +#ifdef CONFIG_PM + .resume = ata_scsi_device_resume, + .suspend = ata_scsi_device_suspend, +#endif +}; + +static const struct ata_port_operations bfin_pata_ops = { + .port_disable = ata_port_disable, + .set_piomode = bfin_set_piomode, + .set_dmamode = bfin_set_dmamode, + + .tf_load = bfin_tf_load, + .tf_read = bfin_tf_read, + .exec_command = bfin_exec_command, + .check_status = bfin_check_status, + .check_altstatus = bfin_check_altstatus, + .dev_select = bfin_std_dev_select, + + .bmdma_setup = bfin_bmdma_setup, + .bmdma_start = bfin_bmdma_start, + .bmdma_stop = bfin_bmdma_stop, + .bmdma_status = bfin_bmdma_status, + .data_xfer = bfin_data_xfer, + + .qc_prep = ata_noop_qc_prep, + .qc_issue = ata_qc_issue_prot, + + .freeze = bfin_bmdma_freeze, + .thaw = bfin_bmdma_thaw, + .error_handler = bfin_error_handler, + .post_internal_cmd = bfin_bmdma_stop, + + .irq_handler = ata_interrupt, + .irq_clear = bfin_irq_clear, + .irq_on = bfin_irq_on, + .irq_ack = bfin_irq_ack, + + .port_start = bfin_port_start, + .port_stop = bfin_port_stop, +}; + +static struct ata_port_info bfin_port_info[] = { + { + .sht = &bfin_sht, + .flags = ATA_FLAG_SLAVE_POSS + | ATA_FLAG_MMIO + | ATA_FLAG_NO_LEGACY, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0, +#ifdef CONFIG_PATA_BF54X_DMA + .udma_mask = ATA_UDMA5, +#else + .udma_mask = 0, +#endif + .port_ops = &bfin_pata_ops, + }, +}; + +/** + * bfin_reset_controller - initialize BF54x ATAPI controller. + */ + +static int bfin_reset_controller(struct ata_host *host) +{ + void __iomem *base = (void __iomem *)host->ports[0]->ioaddr.ctl_addr; + int count; + unsigned short status; + + /* Disable all ATAPI interrupts */ + ATAPI_SET_INT_MASK(base, 0); + SSYNC(); + + /* Assert the RESET signal 25us*/ + ATAPI_SET_CONTROL(base, ATAPI_GET_CONTROL(base) | DEV_RST); + udelay(30); + + /* Negate the RESET signal for 2ms*/ + ATAPI_SET_CONTROL(base, ATAPI_GET_CONTROL(base) & ~DEV_RST); + msleep(2); + + /* Wait on Busy flag to clear */ + count = 10000000; + do { + status = read_atapi_register(base, ATA_REG_STATUS); + } while (count-- && (status & ATA_BUSY)); + + /* Enable only ATAPI Device interrupt */ + ATAPI_SET_INT_MASK(base, 1); + SSYNC(); + + return (!count); +} + +/** + * atapi_io_port - define atapi peripheral port pins. + */ +static unsigned short atapi_io_port[] = { + P_ATAPI_RESET, + P_ATAPI_DIOR, + P_ATAPI_DIOW, + P_ATAPI_CS0, + P_ATAPI_CS1, + P_ATAPI_DMACK, + P_ATAPI_DMARQ, + P_ATAPI_INTRQ, + P_ATAPI_IORDY, + 0 +}; + +/** + * bfin_atapi_probe - attach a bfin atapi interface + * @pdev: platform device + * + * Register a bfin atapi interface. + * + * + * Platform devices are expected to contain 2 resources per port: + * + * - I/O Base (IORESOURCE_IO) + * - IRQ (IORESOURCE_IRQ) + * + */ +static int __devinit bfin_atapi_probe(struct platform_device *pdev) +{ + int board_idx = 0; + struct resource *res; + struct ata_host *host; + const struct ata_port_info *ppi[] = + { &bfin_port_info[board_idx], NULL }; + + /* + * Simple resource validation .. + */ + if (unlikely(pdev->num_resources != 2)) { + dev_err(&pdev->dev, "invalid number of resources\n"); + return -EINVAL; + } + + /* + * Get the register base first + */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) + return -EINVAL; + + /* + * Now that that's out of the way, wire up the port.. + */ + host = ata_host_alloc_pinfo(&pdev->dev, ppi, 1); + if (!host) + return -ENOMEM; + + host->ports[0]->ioaddr.ctl_addr = (void *)res->start; + + if (peripheral_request_list(atapi_io_port, "atapi-io-port")) { + dev_err(&pdev->dev, "Requesting Peripherals faild\n"); + return -EFAULT; + } + + if (bfin_reset_controller(host)) { + peripheral_free_list(atapi_io_port); + dev_err(&pdev->dev, "Fail to reset ATAPI device\n"); + return -EFAULT; + } + + if (ata_host_activate(host, platform_get_irq(pdev, 0), + ata_interrupt, IRQF_SHARED, &bfin_sht) != 0) { + peripheral_free_list(atapi_io_port); + dev_err(&pdev->dev, "Fail to attach ATAPI device\n"); + return -ENODEV; + } + + return 0; +} + +/** + * bfin_atapi_remove - unplug a bfin atapi interface + * @pdev: platform device + * + * A bfin atapi device has been unplugged. Perform the needed + * cleanup. Also called on module unload for any active devices. + */ +static int __devexit bfin_atapi_remove(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct ata_host *host = dev_get_drvdata(dev); + + ata_host_detach(host); + + peripheral_free_list(atapi_io_port); + + return 0; +} + +#ifdef CONFIG_PM +int bfin_atapi_suspend(struct platform_device *pdev, pm_message_t state) +{ + return 0; +} + +int bfin_atapi_resume(struct platform_device *pdev) +{ + return 0; +} +#endif + +static struct platform_driver bfin_atapi_driver = { + .probe = bfin_atapi_probe, + .remove = __devexit_p(bfin_atapi_remove), + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, +#ifdef CONFIG_PM + .suspend = bfin_atapi_suspend, + .resume = bfin_atapi_resume, +#endif + }, +}; + +static int __init bfin_atapi_init(void) +{ + pr_info("register bfin atapi driver\n"); + return platform_driver_register(&bfin_atapi_driver); +} + +static void __exit bfin_atapi_exit(void) +{ + platform_driver_unregister(&bfin_atapi_driver); +} + +module_init(bfin_atapi_init); +module_exit(bfin_atapi_exit); + +MODULE_AUTHOR("Sonic Zhang <sonic.zhang@analog.com>"); +MODULE_DESCRIPTION("PATA driver for blackfin 54x ATAPI controller"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/pata_cmd640.c b/drivers/ata/pata_cmd640.c index 0feb5ae..43d198f 100644 --- a/drivers/ata/pata_cmd640.c +++ b/drivers/ata/pata_cmd640.c @@ -153,7 +153,7 @@ static int cmd640_port_start(struct ata_port *ap) struct pci_dev *pdev = to_pci_dev(ap->host->dev); struct cmd640_reg *timing; - int ret = ata_port_start(ap); + int ret = ata_sff_port_start(ap); if (ret < 0) return ret; @@ -184,7 +184,6 @@ static struct scsi_host_template cmd640_sht = { }; static struct ata_port_operations cmd640_port_ops = { - .port_disable = ata_port_disable, .set_piomode = cmd640_set_piomode, .mode_filter = ata_pci_default_filter, .tf_load = ata_tf_load, @@ -213,7 +212,6 @@ static struct ata_port_operations cmd640_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, .port_start = cmd640_port_start, }; diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c index e34b632..9e412c2 100644 --- a/drivers/ata/pata_cmd64x.c +++ b/drivers/ata/pata_cmd64x.c @@ -31,7 +31,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_cmd64x" -#define DRV_VERSION "0.2.4" +#define DRV_VERSION "0.2.5" /* * CMD64x specific registers definition. @@ -88,14 +88,15 @@ static int cmd648_cable_detect(struct ata_port *ap) } /** - * cmd64x_set_piomode - set initial PIO mode data + * cmd64x_set_piomode - set PIO and MWDMA timing * @ap: ATA interface * @adev: ATA device + * @mode: mode * - * Called to do the PIO mode setup. + * Called to do the PIO and MWDMA mode setup. */ -static void cmd64x_set_piomode(struct ata_port *ap, struct ata_device *adev) +static void cmd64x_set_timing(struct ata_port *ap, struct ata_device *adev, u8 mode) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); struct ata_timing t; @@ -117,8 +118,9 @@ static void cmd64x_set_piomode(struct ata_port *ap, struct ata_device *adev) int arttim = arttim_port[ap->port_no][adev->devno]; int drwtim = drwtim_port[ap->port_no][adev->devno]; - - if (ata_timing_compute(adev, adev->pio_mode, &t, T, 0) < 0) { + /* ata_timing_compute is smart and will produce timings for MWDMA + that don't violate the drives PIO capabilities. */ + if (ata_timing_compute(adev, mode, &t, T, 0) < 0) { printk(KERN_ERR DRV_NAME ": mode computation failed.\n"); return; } @@ -168,6 +170,20 @@ static void cmd64x_set_piomode(struct ata_port *ap, struct ata_device *adev) } /** + * cmd64x_set_piomode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Used when configuring the devices ot set the PIO timings. All the + * actual work is done by the PIO/MWDMA setting helper + */ + +static void cmd64x_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + cmd64x_set_timing(ap, adev, adev->pio_mode); +} + +/** * cmd64x_set_dmamode - set initial DMA mode data * @ap: ATA interface * @adev: ATA device @@ -180,9 +196,6 @@ static void cmd64x_set_dmamode(struct ata_port *ap, struct ata_device *adev) static const u8 udma_data[] = { 0x30, 0x20, 0x10, 0x20, 0x10, 0x00 }; - static const u8 mwdma_data[] = { - 0x30, 0x20, 0x10 - }; struct pci_dev *pdev = to_pci_dev(ap->host->dev); u8 regU, regD; @@ -208,8 +221,10 @@ static void cmd64x_set_dmamode(struct ata_port *ap, struct ata_device *adev) regU |= 1 << adev->devno; /* UDMA on */ if (adev->dma_mode > 2) /* 15nS timing */ regU |= 4 << adev->devno; - } else - regD |= mwdma_data[adev->dma_mode - XFER_MW_DMA_0] << shift; + } else { + regU &= ~ (1 << adev->devno); /* UDMA off */ + cmd64x_set_timing(ap, adev, adev->dma_mode); + } regD |= 0x20 << adev->devno; @@ -269,7 +284,6 @@ static struct scsi_host_template cmd64x_sht = { }; static struct ata_port_operations cmd64x_port_ops = { - .port_disable = ata_port_disable, .set_piomode = cmd64x_set_piomode, .set_dmamode = cmd64x_set_dmamode, .mode_filter = ata_pci_default_filter, @@ -298,13 +312,11 @@ static struct ata_port_operations cmd64x_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, .port_start = ata_port_start, }; static struct ata_port_operations cmd646r1_port_ops = { - .port_disable = ata_port_disable, .set_piomode = cmd64x_set_piomode, .set_dmamode = cmd64x_set_dmamode, .mode_filter = ata_pci_default_filter, @@ -333,13 +345,11 @@ static struct ata_port_operations cmd646r1_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, .port_start = ata_port_start, }; static struct ata_port_operations cmd648_port_ops = { - .port_disable = ata_port_disable, .set_piomode = cmd64x_set_piomode, .set_dmamode = cmd64x_set_dmamode, .mode_filter = ata_pci_default_filter, @@ -368,7 +378,6 @@ static struct ata_port_operations cmd648_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, .port_start = ata_port_start, }; diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c index e245908..33f7f08 100644 --- a/drivers/ata/pata_cs5520.c +++ b/drivers/ata/pata_cs5520.c @@ -158,7 +158,6 @@ static struct scsi_host_template cs5520_sht = { }; static struct ata_port_operations cs5520_port_ops = { - .port_disable = ata_port_disable, .set_piomode = cs5520_set_piomode, .set_dmamode = cs5520_set_dmamode, @@ -184,13 +183,14 @@ static struct ata_port_operations cs5520_port_ops = { .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; static int __devinit cs5520_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { + static const unsigned int cmd_port[] = { 0x1F0, 0x170 }; + static const unsigned int ctl_port[] = { 0x3F6, 0x376 }; struct ata_port_info pi = { .flags = ATA_FLAG_SLAVE_POSS, .pio_mask = 0x1f, @@ -244,10 +244,10 @@ static int __devinit cs5520_init_one(struct pci_dev *pdev, const struct pci_devi } /* Map IO ports and initialize host accordingly */ - iomap[0] = devm_ioport_map(&pdev->dev, 0x1F0, 8); - iomap[1] = devm_ioport_map(&pdev->dev, 0x3F6, 1); - iomap[2] = devm_ioport_map(&pdev->dev, 0x170, 8); - iomap[3] = devm_ioport_map(&pdev->dev, 0x376, 1); + iomap[0] = devm_ioport_map(&pdev->dev, cmd_port[0], 8); + iomap[1] = devm_ioport_map(&pdev->dev, ctl_port[0], 1); + iomap[2] = devm_ioport_map(&pdev->dev, cmd_port[1], 8); + iomap[3] = devm_ioport_map(&pdev->dev, ctl_port[1], 1); iomap[4] = pcim_iomap(pdev, 2, 0); if (!iomap[0] || !iomap[1] || !iomap[2] || !iomap[3] || !iomap[4]) @@ -260,6 +260,10 @@ static int __devinit cs5520_init_one(struct pci_dev *pdev, const struct pci_devi ioaddr->bmdma_addr = iomap[4]; ata_std_ports(ioaddr); + ata_port_desc(host->ports[0], + "cmd 0x%x ctl 0x%x", cmd_port[0], ctl_port[0]); + ata_port_pbar_desc(host->ports[0], 4, 0, "bmdma"); + ioaddr = &host->ports[1]->ioaddr; ioaddr->cmd_addr = iomap[2]; ioaddr->ctl_addr = iomap[3]; @@ -267,6 +271,10 @@ static int __devinit cs5520_init_one(struct pci_dev *pdev, const struct pci_devi ioaddr->bmdma_addr = iomap[4] + 8; ata_std_ports(ioaddr); + ata_port_desc(host->ports[1], + "cmd 0x%x ctl 0x%x", cmd_port[1], ctl_port[1]); + ata_port_pbar_desc(host->ports[1], 4, 8, "bmdma"); + /* activate the host */ pci_set_master(pdev); rc = ata_host_start(host); @@ -285,33 +293,12 @@ static int __devinit cs5520_init_one(struct pci_dev *pdev, const struct pci_devi if (rc) return rc; - if (i == 0) - host->irq = irq[0]; - else - host->irq2 = irq[1]; + ata_port_desc(ap, "irq %d", irq[i]); } return ata_host_register(host, &cs5520_sht); } -/** - * cs5520_remove_one - device unload - * @pdev: PCI device being removed - * - * Handle an unplug/unload event for a PCI device. Unload the - * PCI driver but do not use the default handler as we manage - * resources ourself and *MUST NOT* disable the device as it has - * other functions. - */ - -static void __devexit cs5520_remove_one(struct pci_dev *pdev) -{ - struct device *dev = pci_dev_to_dev(pdev); - struct ata_host *host = dev_get_drvdata(dev); - - ata_host_detach(host); -} - #ifdef CONFIG_PM /** * cs5520_reinit_one - device resume @@ -368,7 +355,7 @@ static struct pci_driver cs5520_pci_driver = { .name = DRV_NAME, .id_table = pata_cs5520, .probe = cs5520_init_one, - .remove = cs5520_remove_one, + .remove = ata_pci_remove_one, #ifdef CONFIG_PM .suspend = cs5520_pci_device_suspend, .resume = cs5520_reinit_one, diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c index eaaea84..57e827e 100644 --- a/drivers/ata/pata_cs5530.c +++ b/drivers/ata/pata_cs5530.c @@ -179,7 +179,6 @@ static struct scsi_host_template cs5530_sht = { }; static struct ata_port_operations cs5530_port_ops = { - .port_disable = ata_port_disable, .set_piomode = cs5530_set_piomode, .set_dmamode = cs5530_set_dmamode, .mode_filter = ata_pci_default_filter, @@ -209,9 +208,8 @@ static struct ata_port_operations cs5530_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; static const struct dmi_system_id palmax_dmi_table[] = { diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c index 360b6f3..3578593 100644 --- a/drivers/ata/pata_cs5535.c +++ b/drivers/ata/pata_cs5535.c @@ -176,7 +176,6 @@ static struct scsi_host_template cs5535_sht = { }; static struct ata_port_operations cs5535_port_ops = { - .port_disable = ata_port_disable, .set_piomode = cs5535_set_piomode, .set_dmamode = cs5535_set_dmamode, .mode_filter = ata_pci_default_filter, @@ -206,9 +205,8 @@ static struct ata_port_operations cs5535_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; /** diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c index 6cbc877..fc5f9c4 100644 --- a/drivers/ata/pata_cypress.c +++ b/drivers/ata/pata_cypress.c @@ -128,7 +128,6 @@ static struct scsi_host_template cy82c693_sht = { }; static struct ata_port_operations cy82c693_port_ops = { - .port_disable = ata_port_disable, .set_piomode = cy82c693_set_piomode, .set_dmamode = cy82c693_set_dmamode, .mode_filter = ata_pci_default_filter, @@ -158,9 +157,8 @@ static struct ata_port_operations cy82c693_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; static int cy82c693_init_one(struct pci_dev *pdev, const struct pci_device_id *id) diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c index c8ba59c..043dcd3 100644 --- a/drivers/ata/pata_efar.c +++ b/drivers/ata/pata_efar.c @@ -26,25 +26,26 @@ /** * efar_pre_reset - Enable bits - * @ap: Port + * @link: ATA link * @deadline: deadline jiffies for the operation * * Perform cable detection for the EFAR ATA interface. This is * different to the PIIX arrangement */ -static int efar_pre_reset(struct ata_port *ap, unsigned long deadline) +static int efar_pre_reset(struct ata_link *link, unsigned long deadline) { static const struct pci_bits efar_enable_bits[] = { { 0x41U, 1U, 0x80UL, 0x80UL }, /* port 0 */ { 0x43U, 1U, 0x80UL, 0x80UL }, /* port 1 */ }; + struct ata_port *ap = link->ap; struct pci_dev *pdev = to_pci_dev(ap->host->dev); if (!pci_test_config_bits(pdev, &efar_enable_bits[ap->port_no])) return -ENOENT; - return ata_std_prereset(ap, deadline); + return ata_std_prereset(link, deadline); } /** @@ -250,7 +251,6 @@ static struct scsi_host_template efar_sht = { }; static const struct ata_port_operations efar_ops = { - .port_disable = ata_port_disable, .set_piomode = efar_set_piomode, .set_dmamode = efar_set_dmamode, .mode_filter = ata_pci_default_filter, @@ -278,9 +278,8 @@ static const struct ata_port_operations efar_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c index 6f7d34a..0713872 100644 --- a/drivers/ata/pata_hpt366.c +++ b/drivers/ata/pata_hpt366.c @@ -312,7 +312,6 @@ static struct scsi_host_template hpt36x_sht = { */ static struct ata_port_operations hpt366_port_ops = { - .port_disable = ata_port_disable, .set_piomode = hpt366_set_piomode, .set_dmamode = hpt366_set_dmamode, .mode_filter = hpt366_filter, @@ -342,9 +341,8 @@ static struct ata_port_operations hpt366_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; /** diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c index c5ddd93..e61cb1f 100644 --- a/drivers/ata/pata_hpt37x.c +++ b/drivers/ata/pata_hpt37x.c @@ -304,15 +304,16 @@ static unsigned long hpt370a_filter(struct ata_device *adev, unsigned long mask) /** * hpt37x_pre_reset - reset the hpt37x bus - * @ap: ATA port to reset + * @link: ATA link to reset * @deadline: deadline jiffies for the operation * * Perform the initial reset handling for the 370/372 and 374 func 0 */ -static int hpt37x_pre_reset(struct ata_port *ap, unsigned long deadline) +static int hpt37x_pre_reset(struct ata_link *link, unsigned long deadline) { u8 scr2, ata66; + struct ata_port *ap = link->ap; struct pci_dev *pdev = to_pci_dev(ap->host->dev); static const struct pci_bits hpt37x_enable_bits[] = { { 0x50, 1, 0x04, 0x04 }, @@ -337,7 +338,7 @@ static int hpt37x_pre_reset(struct ata_port *ap, unsigned long deadline) pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37); udelay(100); - return ata_std_prereset(ap, deadline); + return ata_std_prereset(link, deadline); } /** @@ -352,7 +353,7 @@ static void hpt37x_error_handler(struct ata_port *ap) ata_bmdma_drive_eh(ap, hpt37x_pre_reset, ata_std_softreset, NULL, ata_std_postreset); } -static int hpt374_pre_reset(struct ata_port *ap, unsigned long deadline) +static int hpt374_pre_reset(struct ata_link *link, unsigned long deadline) { static const struct pci_bits hpt37x_enable_bits[] = { { 0x50, 1, 0x04, 0x04 }, @@ -360,6 +361,7 @@ static int hpt374_pre_reset(struct ata_port *ap, unsigned long deadline) }; u16 mcr3, mcr6; u8 ata66; + struct ata_port *ap = link->ap; struct pci_dev *pdev = to_pci_dev(ap->host->dev); if (!pci_test_config_bits(pdev, &hpt37x_enable_bits[ap->port_no])) @@ -387,7 +389,7 @@ static int hpt374_pre_reset(struct ata_port *ap, unsigned long deadline) pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37); udelay(100); - return ata_std_prereset(ap, deadline); + return ata_std_prereset(link, deadline); } /** @@ -642,7 +644,6 @@ static struct scsi_host_template hpt37x_sht = { */ static struct ata_port_operations hpt370_port_ops = { - .port_disable = ata_port_disable, .set_piomode = hpt370_set_piomode, .set_dmamode = hpt370_set_dmamode, .mode_filter = hpt370_filter, @@ -671,9 +672,8 @@ static struct ata_port_operations hpt370_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; /* @@ -681,7 +681,6 @@ static struct ata_port_operations hpt370_port_ops = { */ static struct ata_port_operations hpt370a_port_ops = { - .port_disable = ata_port_disable, .set_piomode = hpt370_set_piomode, .set_dmamode = hpt370_set_dmamode, .mode_filter = hpt370a_filter, @@ -710,9 +709,8 @@ static struct ata_port_operations hpt370a_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; /* @@ -721,7 +719,6 @@ static struct ata_port_operations hpt370a_port_ops = { */ static struct ata_port_operations hpt372_port_ops = { - .port_disable = ata_port_disable, .set_piomode = hpt372_set_piomode, .set_dmamode = hpt372_set_dmamode, .mode_filter = ata_pci_default_filter, @@ -750,9 +747,8 @@ static struct ata_port_operations hpt372_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; /* @@ -761,7 +757,6 @@ static struct ata_port_operations hpt372_port_ops = { */ static struct ata_port_operations hpt374_port_ops = { - .port_disable = ata_port_disable, .set_piomode = hpt372_set_piomode, .set_dmamode = hpt372_set_dmamode, .mode_filter = ata_pci_default_filter, @@ -790,9 +785,8 @@ static struct ata_port_operations hpt374_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; /** diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c index f8f234b..9f1c084 100644 --- a/drivers/ata/pata_hpt3x2n.c +++ b/drivers/ata/pata_hpt3x2n.c @@ -141,21 +141,22 @@ static int hpt3x2n_cable_detect(struct ata_port *ap) /** * hpt3x2n_pre_reset - reset the hpt3x2n bus - * @ap: ATA port to reset + * @link: ATA link to reset * @deadline: deadline jiffies for the operation * * Perform the initial reset handling for the 3x2n series controllers. * Reset the hardware and state machine, */ -static int hpt3xn_pre_reset(struct ata_port *ap, unsigned long deadline) +static int hpt3xn_pre_reset(struct ata_link *link, unsigned long deadline) { + struct ata_port *ap = link->ap; struct pci_dev *pdev = to_pci_dev(ap->host->dev); /* Reset the state machine */ pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37); udelay(100); - return ata_std_prereset(ap, deadline); + return ata_std_prereset(link, deadline); } /** @@ -360,7 +361,6 @@ static struct scsi_host_template hpt3x2n_sht = { */ static struct ata_port_operations hpt3x2n_port_ops = { - .port_disable = ata_port_disable, .set_piomode = hpt3x2n_set_piomode, .set_dmamode = hpt3x2n_set_dmamode, .mode_filter = ata_pci_default_filter, @@ -390,9 +390,8 @@ static struct ata_port_operations hpt3x2n_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; /** diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c index be0f05e..cb8bdb6 100644 --- a/drivers/ata/pata_hpt3x3.c +++ b/drivers/ata/pata_hpt3x3.c @@ -120,7 +120,6 @@ static struct scsi_host_template hpt3x3_sht = { }; static struct ata_port_operations hpt3x3_port_ops = { - .port_disable = ata_port_disable, .set_piomode = hpt3x3_set_piomode, #if defined(CONFIG_PATA_HPT3X3_DMA) .set_dmamode = hpt3x3_set_dmamode, @@ -153,9 +152,8 @@ static struct ata_port_operations hpt3x3_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; /** @@ -239,7 +237,8 @@ static int hpt3x3_init_one(struct pci_dev *pdev, const struct pci_device_id *id) base = host->iomap[4]; /* Bus mastering base */ for (i = 0; i < host->n_ports; i++) { - struct ata_ioports *ioaddr = &host->ports[i]->ioaddr; + struct ata_port *ap = host->ports[i]; + struct ata_ioports *ioaddr = &ap->ioaddr; ioaddr->cmd_addr = base + offset_cmd[i]; ioaddr->altstatus_addr = @@ -247,6 +246,9 @@ static int hpt3x3_init_one(struct pci_dev *pdev, const struct pci_device_id *id) ioaddr->scr_addr = NULL; ata_std_ports(ioaddr); ioaddr->bmdma_addr = base + 8 * i; + + ata_port_pbar_desc(ap, 4, -1, "ioport"); + ata_port_pbar_desc(ap, 4, offset_cmd[i], "cmd"); } pci_set_master(pdev); return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED, diff --git a/drivers/ata/pata_icside.c b/drivers/ata/pata_icside.c index 64a7117..be30923 100644 --- a/drivers/ata/pata_icside.c +++ b/drivers/ata/pata_icside.c @@ -70,6 +70,8 @@ struct pata_icside_info { unsigned int mwdma_mask; unsigned int nr_ports; const struct portinfo *port[2]; + unsigned long raw_base; + unsigned long raw_ioc_base; }; #define ICS_TYPE_A3IN 0 @@ -357,26 +359,7 @@ static void pata_icside_error_handler(struct ata_port *ap) pata_icside_postreset); } -static u8 pata_icside_irq_ack(struct ata_port *ap, unsigned int chk_drq) -{ - unsigned int bits = chk_drq ? ATA_BUSY | ATA_DRQ : ATA_BUSY; - u8 status; - - status = ata_busy_wait(ap, bits, 1000); - if (status & bits) - if (ata_msg_err(ap)) - printk(KERN_ERR "abnormal status 0x%X\n", status); - - if (ata_msg_intr(ap)) - printk(KERN_INFO "%s: irq ack: drv_stat 0x%X\n", - __FUNCTION__, status); - - return status; -} - static struct ata_port_operations pata_icside_port_ops = { - .port_disable = ata_port_disable, - .set_dmamode = pata_icside_set_dmamode, .tf_load = ata_tf_load, @@ -403,7 +386,6 @@ static struct ata_port_operations pata_icside_port_ops = { .irq_clear = ata_dummy_noret, .irq_on = ata_irq_on, - .irq_ack = pata_icside_irq_ack, .port_start = pata_icside_port_start, @@ -412,9 +394,10 @@ static struct ata_port_operations pata_icside_port_ops = { }; static void __devinit -pata_icside_setup_ioaddr(struct ata_ioports *ioaddr, void __iomem *base, +pata_icside_setup_ioaddr(struct ata_port *ap, void __iomem *base, const struct portinfo *info) { + struct ata_ioports *ioaddr = &ap->ioaddr; void __iomem *cmd = base + info->dataoffset; ioaddr->cmd_addr = cmd; @@ -431,6 +414,13 @@ pata_icside_setup_ioaddr(struct ata_ioports *ioaddr, void __iomem *base, ioaddr->ctl_addr = base + info->ctrloffset; ioaddr->altstatus_addr = ioaddr->ctl_addr; + + ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", + info->raw_base + info->dataoffset, + info->raw_base + info->ctrloffset); + + if (info->raw_ioc_base) + ata_port_desc(ap, "iocbase 0x%lx", info->raw_ioc_base); } static int __devinit pata_icside_register_v5(struct pata_icside_info *info) @@ -451,6 +441,8 @@ static int __devinit pata_icside_register_v5(struct pata_icside_info *info) info->nr_ports = 1; info->port[0] = &pata_icside_portinfo_v5; + info->raw_base = ecard_resource_start(ec, ECARD_RES_MEMC); + return 0; } @@ -491,6 +483,9 @@ static int __devinit pata_icside_register_v6(struct pata_icside_info *info) info->port[0] = &pata_icside_portinfo_v6_1; info->port[1] = &pata_icside_portinfo_v6_2; + info->raw_base = ecard_resource_start(ec, ECARD_RES_EASI); + info->raw_ioc_base = ecard_resource_start(ec, ECARD_RES_IOCFAST); + return icside_dma_init(info); } @@ -527,7 +522,7 @@ static int __devinit pata_icside_add_ports(struct pata_icside_info *info) ap->flags |= ATA_FLAG_SLAVE_POSS; ap->ops = &pata_icside_port_ops; - pata_icside_setup_ioaddr(&ap->ioaddr, info->base, info->port[i]); + pata_icside_setup_ioaddr(ap, info->base, info->port[i]); } return ata_host_activate(host, ec->irq, ata_interrupt, 0, diff --git a/drivers/ata/pata_isapnp.c b/drivers/ata/pata_isapnp.c index 9e553c5..88ab0e1 100644 --- a/drivers/ata/pata_isapnp.c +++ b/drivers/ata/pata_isapnp.c @@ -38,7 +38,6 @@ static struct scsi_host_template isapnp_sht = { }; static struct ata_port_operations isapnp_port_ops = { - .port_disable = ata_port_disable, .tf_load = ata_tf_load, .tf_read = ata_tf_read, .check_status = ata_check_status, @@ -58,9 +57,8 @@ static struct ata_port_operations isapnp_port_ops = { .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; /** @@ -112,6 +110,10 @@ static int isapnp_init_one(struct pnp_dev *idev, const struct pnp_device_id *dev ata_std_ports(&ap->ioaddr); + ata_port_desc(ap, "cmd 0x%llx ctl 0x%llx", + (unsigned long long)pnp_port_start(idev, 0), + (unsigned long long)pnp_port_start(idev, 1)); + /* activate */ return ata_host_activate(host, pnp_irq(idev, 0), ata_interrupt, 0, &isapnp_sht); diff --git a/drivers/ata/pata_it8213.c b/drivers/ata/pata_it8213.c index b8af55e..1eda821 100644 --- a/drivers/ata/pata_it8213.c +++ b/drivers/ata/pata_it8213.c @@ -23,23 +23,24 @@ /** * it8213_pre_reset - check for 40/80 pin - * @ap: Port + * @link: link * @deadline: deadline jiffies for the operation * * Filter out ports by the enable bits before doing the normal reset * and probe. */ -static int it8213_pre_reset(struct ata_port *ap, unsigned long deadline) +static int it8213_pre_reset(struct ata_link *link, unsigned long deadline) { static const struct pci_bits it8213_enable_bits[] = { { 0x41U, 1U, 0x80UL, 0x80UL }, /* port 0 */ }; + struct ata_port *ap = link->ap; struct pci_dev *pdev = to_pci_dev(ap->host->dev); if (!pci_test_config_bits(pdev, &it8213_enable_bits[ap->port_no])) return -ENOENT; - return ata_std_prereset(ap, deadline); + return ata_std_prereset(link, deadline); } /** @@ -260,7 +261,6 @@ static struct scsi_host_template it8213_sht = { }; static const struct ata_port_operations it8213_ops = { - .port_disable = ata_port_disable, .set_piomode = it8213_set_piomode, .set_dmamode = it8213_set_dmamode, .mode_filter = ata_pci_default_filter, @@ -288,9 +288,8 @@ static const struct ata_port_operations it8213_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c index 5d8b91e..988ef73 100644 --- a/drivers/ata/pata_it821x.c +++ b/drivers/ata/pata_it821x.c @@ -391,7 +391,7 @@ static void it821x_passthru_dev_select(struct ata_port *ap, { struct it821x_dev *itdev = ap->private_data; if (itdev && device != itdev->last_device) { - struct ata_device *adev = &ap->device[device]; + struct ata_device *adev = &ap->link.device[device]; it821x_program(ap, adev, itdev->pio[adev->devno]); itdev->last_device = device; } @@ -450,7 +450,7 @@ static unsigned int it821x_passthru_qc_issue_prot(struct ata_queued_cmd *qc) /** * it821x_smart_set_mode - mode setting - * @ap: interface to set up + * @link: interface to set up * @unused: device that failed (error only) * * Use a non standard set_mode function. We don't want to be tuned. @@ -459,12 +459,11 @@ static unsigned int it821x_passthru_qc_issue_prot(struct ata_queued_cmd *qc) * and respect them. */ -static int it821x_smart_set_mode(struct ata_port *ap, struct ata_device **unused) +static int it821x_smart_set_mode(struct ata_link *link, struct ata_device **unused) { - int i; + struct ata_device *dev; - for (i = 0; i < ATA_MAX_DEVICES; i++) { - struct ata_device *dev = &ap->device[i]; + ata_link_for_each_dev(dev, link) { if (ata_dev_enabled(dev)) { /* We don't really care */ dev->pio_mode = XFER_PIO_0; @@ -564,7 +563,7 @@ static int it821x_port_start(struct ata_port *ap) struct it821x_dev *itdev; u8 conf; - int ret = ata_port_start(ap); + int ret = ata_sff_port_start(ap); if (ret < 0) return ret; @@ -621,7 +620,6 @@ static struct scsi_host_template it821x_sht = { static struct ata_port_operations it821x_smart_port_ops = { .set_mode = it821x_smart_set_mode, - .port_disable = ata_port_disable, .tf_load = ata_tf_load, .tf_read = ata_tf_read, .mode_filter = ata_pci_default_filter, @@ -651,13 +649,11 @@ static struct ata_port_operations it821x_smart_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, .port_start = it821x_port_start, }; static struct ata_port_operations it821x_passthru_port_ops = { - .port_disable = ata_port_disable, .set_piomode = it821x_passthru_set_piomode, .set_dmamode = it821x_passthru_set_dmamode, .mode_filter = ata_pci_default_filter, @@ -688,7 +684,6 @@ static struct ata_port_operations it821x_passthru_port_ops = { .irq_clear = ata_bmdma_irq_clear, .irq_handler = ata_interrupt, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, .port_start = it821x_port_start, }; diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c index 5dea358..fcd532a 100644 --- a/drivers/ata/pata_ixp4xx_cf.c +++ b/drivers/ata/pata_ixp4xx_cf.c @@ -26,12 +26,11 @@ #define DRV_NAME "pata_ixp4xx_cf" #define DRV_VERSION "0.2" -static int ixp4xx_set_mode(struct ata_port *ap, struct ata_device **error) +static int ixp4xx_set_mode(struct ata_link *link, struct ata_device **error) { - int i; + struct ata_device *dev; - for (i = 0; i < ATA_MAX_DEVICES; i++) { - struct ata_device *dev = &ap->device[i]; + ata_link_for_each_dev(dev, link) { if (ata_dev_enabled(dev)) { ata_dev_printk(dev, KERN_INFO, "configured for PIO0\n"); dev->pio_mode = XFER_PIO_0; @@ -49,7 +48,7 @@ static void ixp4xx_mmio_data_xfer(struct ata_device *adev, unsigned char *buf, unsigned int i; unsigned int words = buflen >> 1; u16 *buf16 = (u16 *) buf; - struct ata_port *ap = adev->ap; + struct ata_port *ap = adev->link->ap; void __iomem *mmio = ap->ioaddr.data_addr; struct ixp4xx_pata_data *data = ap->host->dev->platform_data; @@ -108,7 +107,6 @@ static struct ata_port_operations ixp4xx_port_ops = { .set_mode = ixp4xx_set_mode, .mode_filter = ata_pci_default_filter, - .port_disable = ata_port_disable, .tf_load = ata_tf_load, .tf_read = ata_tf_read, .exec_command = ata_exec_command, @@ -128,14 +126,17 @@ static struct ata_port_operations ixp4xx_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_dummy_irq_ack, .port_start = ata_port_start, }; static void ixp4xx_setup_port(struct ata_ioports *ioaddr, - struct ixp4xx_pata_data *data) + struct ixp4xx_pata_data *data, + unsigned long raw_cs0, unsigned long raw_cs1) { + unsigned long raw_cmd = raw_cs0; + unsigned long raw_ctl = raw_cs1 + 0x06; + ioaddr->cmd_addr = data->cs0; ioaddr->altstatus_addr = data->cs1 + 0x06; ioaddr->ctl_addr = data->cs1 + 0x06; @@ -161,7 +162,12 @@ static void ixp4xx_setup_port(struct ata_ioports *ioaddr, *(unsigned long *)&ioaddr->device_addr ^= 0x03; *(unsigned long *)&ioaddr->status_addr ^= 0x03; *(unsigned long *)&ioaddr->command_addr ^= 0x03; + + raw_cmd ^= 0x03; + raw_ctl ^= 0x03; #endif + + ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", raw_cmd, raw_ctl); } static __devinit int ixp4xx_pata_probe(struct platform_device *pdev) @@ -206,7 +212,7 @@ static __devinit int ixp4xx_pata_probe(struct platform_device *pdev) ap->pio_mask = 0x1f; /* PIO4 */ ap->flags |= ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY | ATA_FLAG_NO_ATAPI; - ixp4xx_setup_port(&ap->ioaddr, data); + ixp4xx_setup_port(ap, data, cs0->start, cs1->start); dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n"); diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c index 4d67f23..225a722 100644 --- a/drivers/ata/pata_jmicron.c +++ b/drivers/ata/pata_jmicron.c @@ -29,7 +29,7 @@ typedef enum { /** * jmicron_pre_reset - check for 40/80 pin - * @ap: Port + * @link: ATA link * @deadline: deadline jiffies for the operation * * Perform the PATA port setup we need. @@ -39,9 +39,9 @@ typedef enum { * and setup here. We assume that has been done by init_one and the * BIOS. */ - -static int jmicron_pre_reset(struct ata_port *ap, unsigned long deadline) +static int jmicron_pre_reset(struct ata_link *link, unsigned long deadline) { + struct ata_port *ap = link->ap; struct pci_dev *pdev = to_pci_dev(ap->host->dev); u32 control; u32 control5; @@ -103,7 +103,7 @@ static int jmicron_pre_reset(struct ata_port *ap, unsigned long deadline) ap->cbl = ATA_CBL_SATA; break; } - return ata_std_prereset(ap, deadline); + return ata_std_prereset(link, deadline); } /** @@ -141,8 +141,6 @@ static struct scsi_host_template jmicron_sht = { }; static const struct ata_port_operations jmicron_ops = { - .port_disable = ata_port_disable, - /* Task file is PCI ATA format, use helpers */ .tf_load = ata_tf_load, .tf_read = ata_tf_read, @@ -168,7 +166,6 @@ static const struct ata_port_operations jmicron_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, /* Generic PATA PCI ATA helpers */ .port_start = ata_port_start, @@ -207,17 +204,8 @@ static int jmicron_init_one (struct pci_dev *pdev, const struct pci_device_id *i } static const struct pci_device_id jmicron_pci_tbl[] = { - { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, - PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xffff00, 361 }, - { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, - PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xffff00, 363 }, - { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, - PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xffff00, 365 }, - { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, - PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xffff00, 366 }, - { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, - PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xffff00, 368 }, - + { PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_STORAGE_IDE << 8, 0xffff00, 0 }, { } /* terminate list */ }; diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c index edffc25..7bed8d8 100644 --- a/drivers/ata/pata_legacy.c +++ b/drivers/ata/pata_legacy.c @@ -96,7 +96,7 @@ static int iordy_mask = 0xFFFFFFFF; /* Use iordy if available */ /** * legacy_set_mode - mode setting - * @ap: IDE interface + * @link: IDE link * @unused: Device that failed when error is returned * * Use a non standard set_mode function. We don't want to be tuned. @@ -107,12 +107,11 @@ static int iordy_mask = 0xFFFFFFFF; /* Use iordy if available */ * expand on this as per hdparm in the base kernel. */ -static int legacy_set_mode(struct ata_port *ap, struct ata_device **unused) +static int legacy_set_mode(struct ata_link *link, struct ata_device **unused) { - int i; + struct ata_device *dev; - for (i = 0; i < ATA_MAX_DEVICES; i++) { - struct ata_device *dev = &ap->device[i]; + ata_link_for_each_dev(dev, link) { if (ata_dev_enabled(dev)) { ata_dev_printk(dev, KERN_INFO, "configured for PIO\n"); dev->pio_mode = XFER_PIO_0; @@ -151,7 +150,6 @@ static struct scsi_host_template legacy_sht = { */ static struct ata_port_operations simple_port_ops = { - .port_disable = ata_port_disable, .tf_load = ata_tf_load, .tf_read = ata_tf_read, .check_status = ata_check_status, @@ -172,7 +170,6 @@ static struct ata_port_operations simple_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, .port_start = ata_port_start, }; @@ -180,7 +177,6 @@ static struct ata_port_operations simple_port_ops = { static struct ata_port_operations legacy_port_ops = { .set_mode = legacy_set_mode, - .port_disable = ata_port_disable, .tf_load = ata_tf_load, .tf_read = ata_tf_read, .check_status = ata_check_status, @@ -201,7 +197,6 @@ static struct ata_port_operations legacy_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, .port_start = ata_port_start, }; @@ -256,7 +251,7 @@ static void pdc20230_set_piomode(struct ata_port *ap, struct ata_device *adev) static void pdc_data_xfer_vlb(struct ata_device *adev, unsigned char *buf, unsigned int buflen, int write_data) { - struct ata_port *ap = adev->ap; + struct ata_port *ap = adev->link->ap; int slop = buflen & 3; unsigned long flags; @@ -296,7 +291,6 @@ static void pdc_data_xfer_vlb(struct ata_device *adev, unsigned char *buf, unsig static struct ata_port_operations pdc20230_port_ops = { .set_piomode = pdc20230_set_piomode, - .port_disable = ata_port_disable, .tf_load = ata_tf_load, .tf_read = ata_tf_read, .check_status = ata_check_status, @@ -317,7 +311,6 @@ static struct ata_port_operations pdc20230_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, .port_start = ata_port_start, }; @@ -352,7 +345,6 @@ static void ht6560a_set_piomode(struct ata_port *ap, struct ata_device *adev) static struct ata_port_operations ht6560a_port_ops = { .set_piomode = ht6560a_set_piomode, - .port_disable = ata_port_disable, .tf_load = ata_tf_load, .tf_read = ata_tf_read, .check_status = ata_check_status, @@ -373,7 +365,6 @@ static struct ata_port_operations ht6560a_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, .port_start = ata_port_start, }; @@ -419,7 +410,6 @@ static void ht6560b_set_piomode(struct ata_port *ap, struct ata_device *adev) static struct ata_port_operations ht6560b_port_ops = { .set_piomode = ht6560b_set_piomode, - .port_disable = ata_port_disable, .tf_load = ata_tf_load, .tf_read = ata_tf_read, .check_status = ata_check_status, @@ -440,7 +430,6 @@ static struct ata_port_operations ht6560b_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, .port_start = ata_port_start, }; @@ -541,7 +530,6 @@ static void opti82c611a_set_piomode(struct ata_port *ap, struct ata_device *adev static struct ata_port_operations opti82c611a_port_ops = { .set_piomode = opti82c611a_set_piomode, - .port_disable = ata_port_disable, .tf_load = ata_tf_load, .tf_read = ata_tf_read, .check_status = ata_check_status, @@ -562,7 +550,6 @@ static struct ata_port_operations opti82c611a_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, .port_start = ata_port_start, }; @@ -675,7 +662,6 @@ static unsigned int opti82c46x_qc_issue_prot(struct ata_queued_cmd *qc) static struct ata_port_operations opti82c46x_port_ops = { .set_piomode = opti82c46x_set_piomode, - .port_disable = ata_port_disable, .tf_load = ata_tf_load, .tf_read = ata_tf_read, .check_status = ata_check_status, @@ -696,7 +682,6 @@ static struct ata_port_operations opti82c46x_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, .port_start = ata_port_start, }; @@ -814,6 +799,8 @@ static __init int legacy_init_one(int port, unsigned long io, unsigned long ctrl ata_std_ports(&ap->ioaddr); ap->private_data = ld; + ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io, ctrl); + ret = ata_host_activate(host, irq, ata_interrupt, 0, &legacy_sht); if (ret) goto fail; diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c index b45506f..9afc8a3 100644 --- a/drivers/ata/pata_marvell.c +++ b/drivers/ata/pata_marvell.c @@ -24,14 +24,15 @@ /** * marvell_pre_reset - check for 40/80 pin - * @ap: Port + * @link: link * @deadline: deadline jiffies for the operation * * Perform the PATA port setup we need. */ -static int marvell_pre_reset(struct ata_port *ap, unsigned long deadline) +static int marvell_pre_reset(struct ata_link *link, unsigned long deadline) { + struct ata_port *ap = link->ap; struct pci_dev *pdev = to_pci_dev(ap->host->dev); u32 devices; void __iomem *barp; @@ -54,7 +55,7 @@ static int marvell_pre_reset(struct ata_port *ap, unsigned long deadline) (!(devices & 0x10))) /* PATA enable ? */ return -ENOENT; - return ata_std_prereset(ap, deadline); + return ata_std_prereset(link, deadline); } static int marvell_cable_detect(struct ata_port *ap) @@ -110,8 +111,6 @@ static struct scsi_host_template marvell_sht = { }; static const struct ata_port_operations marvell_ops = { - .port_disable = ata_port_disable, - /* Task file is PCI ATA format, use helpers */ .tf_load = ata_tf_load, .tf_read = ata_tf_read, @@ -138,10 +137,9 @@ static const struct ata_port_operations marvell_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, /* Generic PATA PCI ATA helpers */ - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c index 099f4cd..412140f 100644 --- a/drivers/ata/pata_mpc52xx.c +++ b/drivers/ata/pata_mpc52xx.c @@ -283,7 +283,6 @@ static struct scsi_host_template mpc52xx_ata_sht = { }; static struct ata_port_operations mpc52xx_ata_port_ops = { - .port_disable = ata_port_disable, .set_piomode = mpc52xx_ata_set_piomode, .dev_select = mpc52xx_ata_dev_select, .tf_load = ata_tf_load, @@ -299,12 +298,12 @@ static struct ata_port_operations mpc52xx_ata_port_ops = { .data_xfer = ata_data_xfer, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, .port_start = ata_port_start, }; static int __devinit -mpc52xx_ata_init_one(struct device *dev, struct mpc52xx_ata_priv *priv) +mpc52xx_ata_init_one(struct device *dev, struct mpc52xx_ata_priv *priv, + unsigned long raw_ata_regs) { struct ata_host *host; struct ata_port *ap; @@ -338,6 +337,8 @@ mpc52xx_ata_init_one(struct device *dev, struct mpc52xx_ata_priv *priv) aio->status_addr = &priv->ata_regs->tf_command; aio->command_addr = &priv->ata_regs->tf_command; + ata_port_desc(ap, "ata_regs 0x%lx", raw_ata_regs); + /* activate host */ return ata_host_activate(host, priv->ata_irq, ata_interrupt, 0, &mpc52xx_ata_sht); @@ -434,7 +435,7 @@ mpc52xx_ata_probe(struct of_device *op, const struct of_device_id *match) } /* Register ourselves to libata */ - rv = mpc52xx_ata_init_one(&op->dev, priv); + rv = mpc52xx_ata_init_one(&op->dev, priv, res_mem.start); if (rv) { printk(KERN_ERR DRV_NAME ": " "Error while registering to ATA layer\n"); diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c index 4ea4283..d548308 100644 --- a/drivers/ata/pata_mpiix.c +++ b/drivers/ata/pata_mpiix.c @@ -46,15 +46,16 @@ enum { SECONDARY = (1 << 14) }; -static int mpiix_pre_reset(struct ata_port *ap, unsigned long deadline) +static int mpiix_pre_reset(struct ata_link *link, unsigned long deadline) { + struct ata_port *ap = link->ap; struct pci_dev *pdev = to_pci_dev(ap->host->dev); static const struct pci_bits mpiix_enable_bits = { 0x6D, 1, 0x80, 0x80 }; if (!pci_test_config_bits(pdev, &mpiix_enable_bits)) return -ENOENT; - return ata_std_prereset(ap, deadline); + return ata_std_prereset(link, deadline); } /** @@ -168,7 +169,6 @@ static struct scsi_host_template mpiix_sht = { }; static struct ata_port_operations mpiix_port_ops = { - .port_disable = ata_port_disable, .set_piomode = mpiix_set_piomode, .tf_load = ata_tf_load, @@ -189,9 +189,8 @@ static struct ata_port_operations mpiix_port_ops = { .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; static int mpiix_init_one(struct pci_dev *dev, const struct pci_device_id *id) @@ -202,7 +201,7 @@ static int mpiix_init_one(struct pci_dev *dev, const struct pci_device_id *id) struct ata_port *ap; void __iomem *cmd_addr, *ctl_addr; u16 idetim; - int irq; + int cmd, ctl, irq; if (!printed_version++) dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n"); @@ -210,6 +209,7 @@ static int mpiix_init_one(struct pci_dev *dev, const struct pci_device_id *id) host = ata_host_alloc(&dev->dev, 1); if (!host) return -ENOMEM; + ap = host->ports[0]; /* MPIIX has many functions which can be turned on or off according to other devices present. Make sure IDE is enabled before we try @@ -221,25 +221,28 @@ static int mpiix_init_one(struct pci_dev *dev, const struct pci_device_id *id) /* See if it's primary or secondary channel... */ if (!(idetim & SECONDARY)) { + cmd = 0x1F0; + ctl = 0x3F6; irq = 14; - cmd_addr = devm_ioport_map(&dev->dev, 0x1F0, 8); - ctl_addr = devm_ioport_map(&dev->dev, 0x3F6, 1); } else { + cmd = 0x170; + ctl = 0x376; irq = 15; - cmd_addr = devm_ioport_map(&dev->dev, 0x170, 8); - ctl_addr = devm_ioport_map(&dev->dev, 0x376, 1); } + cmd_addr = devm_ioport_map(&dev->dev, cmd, 8); + ctl_addr = devm_ioport_map(&dev->dev, ctl, 1); if (!cmd_addr || !ctl_addr) return -ENOMEM; + ata_port_desc(ap, "cmd 0x%x ctl 0x%x", cmd, ctl); + /* We do our own plumbing to avoid leaking special cases for whacko ancient hardware into the core code. There are two issues to worry about. #1 The chip is a bridge so if in legacy mode and without BARs set fools the setup. #2 If you pci_disable_device the MPIIX your box goes castors up */ - ap = host->ports[0]; ap->ops = &mpiix_port_ops; ap->pio_mask = 0x1F; ap->flags |= ATA_FLAG_SLAVE_POSS; diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c index 40eb574..25c922a 100644 --- a/drivers/ata/pata_netcell.c +++ b/drivers/ata/pata_netcell.c @@ -40,8 +40,6 @@ static struct scsi_host_template netcell_sht = { }; static const struct ata_port_operations netcell_ops = { - .port_disable = ata_port_disable, - /* Task file is PCI ATA format, use helpers */ .tf_load = ata_tf_load, .tf_read = ata_tf_read, @@ -68,10 +66,9 @@ static const struct ata_port_operations netcell_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, /* Generic PATA PCI ATA helpers */ - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; diff --git a/drivers/ata/pata_ns87410.c b/drivers/ata/pata_ns87410.c index 2f5d714..6e8e557 100644 --- a/drivers/ata/pata_ns87410.c +++ b/drivers/ata/pata_ns87410.c @@ -32,14 +32,15 @@ /** * ns87410_pre_reset - probe begin - * @ap: ATA port + * @link: ATA link * @deadline: deadline jiffies for the operation * * Check enabled ports */ -static int ns87410_pre_reset(struct ata_port *ap, unsigned long deadline) +static int ns87410_pre_reset(struct ata_link *link, unsigned long deadline) { + struct ata_port *ap = link->ap; struct pci_dev *pdev = to_pci_dev(ap->host->dev); static const struct pci_bits ns87410_enable_bits[] = { { 0x43, 1, 0x08, 0x08 }, @@ -49,7 +50,7 @@ static int ns87410_pre_reset(struct ata_port *ap, unsigned long deadline) if (!pci_test_config_bits(pdev, &ns87410_enable_bits[ap->port_no])) return -ENOENT; - return ata_std_prereset(ap, deadline); + return ata_std_prereset(link, deadline); } /** @@ -161,7 +162,6 @@ static struct scsi_host_template ns87410_sht = { }; static struct ata_port_operations ns87410_port_ops = { - .port_disable = ata_port_disable, .set_piomode = ns87410_set_piomode, .tf_load = ata_tf_load, @@ -184,9 +184,8 @@ static struct ata_port_operations ns87410_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; static int ns87410_init_one(struct pci_dev *dev, const struct pci_device_id *id) diff --git a/drivers/ata/pata_ns87415.c b/drivers/ata/pata_ns87415.c new file mode 100644 index 0000000..bb97ef5 --- /dev/null +++ b/drivers/ata/pata_ns87415.c @@ -0,0 +1,467 @@ +/* + * pata_ns87415.c - NS87415 (non PARISC) PATA + * + * (C) 2005 Red Hat <alan@redhat.com> + * + * This is a fairly generic MWDMA controller. It has some limitations + * as it requires timing reloads on PIO/DMA transitions but it is otherwise + * fairly well designed. + * + * This driver assumes the firmware has left the chip in a valid ST506 + * compliant state, either legacy IRQ 14/15 or native INTA shared. You + * may need to add platform code if your system fails to do this. + * + * The same cell appears in the 87560 controller used by some PARISC + * systems. This has its own special mountain of errata. + * + * TODO: + * Test PARISC SuperIO + * Get someone to test on SPARC + * Implement lazy pio/dma switching for better performance + * 8bit shared timing. + * See if we need to kill the FIFO for ATAPI + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <scsi/scsi_host.h> +#include <linux/libata.h> +#include <linux/ata.h> + +#define DRV_NAME "pata_ns87415" +#define DRV_VERSION "0.0.1" + +/** + * ns87415_set_mode - Initialize host controller mode timings + * @ap: Port whose timings we are configuring + * @adev: Device whose timings we are configuring + * @mode: Mode to set + * + * Program the mode registers for this controller, channel and + * device. Because the chip is quite an old design we have to do this + * for PIO/DMA switches. + * + * LOCKING: + * None (inherited from caller). + */ + +static void ns87415_set_mode(struct ata_port *ap, struct ata_device *adev, u8 mode) +{ + struct pci_dev *dev = to_pci_dev(ap->host->dev); + int unit = 2 * ap->port_no + adev->devno; + int timing = 0x44 + 2 * unit; + unsigned long T = 1000000000 / 33333; /* PCI clocks */ + struct ata_timing t; + u16 clocking; + u8 iordy; + u8 status; + + /* Timing register format is 17 - low nybble read timing with + the high nybble being 16 - x for recovery time in PCI clocks */ + + ata_timing_compute(adev, adev->pio_mode, &t, T, 0); + + clocking = 17 - FIT(t.active, 2, 17); + clocking |= (16 - FIT(t.recover, 1, 16)) << 4; + /* Use the same timing for read and write bytes */ + clocking |= (clocking << 8); + pci_write_config_word(dev, timing, clocking); + + /* Set the IORDY enable versus DMA enable on or off properly */ + pci_read_config_byte(dev, 0x42, &iordy); + iordy &= ~(1 << (4 + unit)); + if (mode >= XFER_MW_DMA_0 || !ata_pio_need_iordy(adev)) + iordy |= (1 << (4 + unit)); + + /* Paranoia: We shouldn't ever get here with busy write buffers + but if so wait */ + + pci_read_config_byte(dev, 0x43, &status); + while (status & 0x03) { + udelay(1); + pci_read_config_byte(dev, 0x43, &status); + } + /* Flip the IORDY/DMA bits now we are sure the write buffers are + clear */ + pci_write_config_byte(dev, 0x42, iordy); + + /* TODO: Set byte 54 command timing to the best 8bit + mode shared by all four devices */ +} + +/** + * ns87415_set_piomode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: Device to program + * + * Set PIO mode for device, in host controller PCI config space. + * + * LOCKING: + * None (inherited from caller). + */ + +static void ns87415_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + ns87415_set_mode(ap, adev, adev->pio_mode); +} + +/** + * ns87415_bmdma_setup - Set up DMA + * @qc: Command block + * + * Set up for bus masterng DMA. We have to do this ourselves + * rather than use the helper due to a chip erratum + */ + +static void ns87415_bmdma_setup(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE); + u8 dmactl; + + /* load PRD table addr. */ + mb(); /* make sure PRD table writes are visible to controller */ + iowrite32(ap->prd_dma, ap->ioaddr.bmdma_addr + ATA_DMA_TABLE_OFS); + + /* specify data direction, triple-check start bit is clear */ + dmactl = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD); + dmactl &= ~(ATA_DMA_WR | ATA_DMA_START); + /* Due to an erratum we need to write these bits to the wrong + place - which does save us an I/O bizarrely */ + dmactl |= ATA_DMA_INTR | ATA_DMA_ERR; + if (!rw) + dmactl |= ATA_DMA_WR; + iowrite8(dmactl, ap->ioaddr.bmdma_addr + ATA_DMA_CMD); + /* issue r/w command */ + ap->ops->exec_command(ap, &qc->tf); +} + +/** + * ns87415_bmdma_start - Begin DMA transfer + * @qc: Command block + * + * Switch the timings for the chip and set up for a DMA transfer + * before the DMA burst begins. + * + * FIXME: We should do lazy switching on bmdma_start versus + * ata_pio_data_xfer for better performance. + */ + +static void ns87415_bmdma_start(struct ata_queued_cmd *qc) +{ + ns87415_set_mode(qc->ap, qc->dev, qc->dev->dma_mode); + ata_bmdma_start(qc); +} + +/** + * ns87415_bmdma_stop - End DMA transfer + * @qc: Command block + * + * End DMA mode and switch the controller back into PIO mode + */ + +static void ns87415_bmdma_stop(struct ata_queued_cmd *qc) +{ + ata_bmdma_stop(qc); + ns87415_set_mode(qc->ap, qc->dev, qc->dev->pio_mode); +} + +/** + * ns87415_bmdma_irq_clear - Clear interrupt + * @ap: Channel to clear + * + * Erratum: Due to a chip bug regisers 02 and 0A bit 1 and 2 (the + * error bits) are reset by writing to register 00 or 08. + */ + +static void ns87415_bmdma_irq_clear(struct ata_port *ap) +{ + void __iomem *mmio = ap->ioaddr.bmdma_addr; + + if (!mmio) + return; + iowrite8((ioread8(mmio + ATA_DMA_CMD) | ATA_DMA_INTR | ATA_DMA_ERR), + mmio + ATA_DMA_CMD); +} + +/** + * ns87415_check_atapi_dma - ATAPI DMA filter + * @qc: Command block + * + * Disable ATAPI DMA (for now). We may be able to do DMA if we + * kill the prefetching. This isn't clear. + */ + +static int ns87415_check_atapi_dma(struct ata_queued_cmd *qc) +{ + return -EOPNOTSUPP; +} + +#if defined(CONFIG_SUPERIO) + +/* SUPERIO 87560 is a PoS chip that NatSem denies exists. + * Unfortunately, it's built-in on all Astro-based PA-RISC workstations + * which use the integrated NS87514 cell for CD-ROM support. + * i.e we have to support for CD-ROM installs. + * See drivers/parisc/superio.c for more gory details. + * + * Workarounds taken from drivers/ide/pci/ns87415.c + */ + +#include <asm/superio.h> + +/** + * ns87560_read_buggy - workaround buggy Super I/O chip + * @port: Port to read + * + * Work around chipset problems in the 87560 SuperIO chip + */ + +static u8 ns87560_read_buggy(void __iomem *port) +{ + u8 tmp; + int retries = SUPERIO_IDE_MAX_RETRIES; + do { + tmp = ioread8(port); + if (tmp != 0) + return tmp; + udelay(50); + } while(retries-- > 0); + return tmp; +} + +/** + * ns87560_check_status + * @ap: channel to check + * + * Return the status of the channel working around the + * 87560 flaws. + */ + +static u8 ns87560_check_status(struct ata_port *ap) +{ + return ns87560_read_buggy(ap->ioaddr.status_addr); +} + +/** + * ns87560_tf_read - input device's ATA taskfile shadow registers + * @ap: Port from which input is read + * @tf: ATA taskfile register set for storing input + * + * Reads ATA taskfile registers for currently-selected device + * into @tf. Work around the 87560 bugs. + * + * LOCKING: + * Inherited from caller. + */ +void ns87560_tf_read(struct ata_port *ap, struct ata_taskfile *tf) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + + tf->command = ns87560_check_status(ap); + tf->feature = ioread8(ioaddr->error_addr); + tf->nsect = ioread8(ioaddr->nsect_addr); + tf->lbal = ioread8(ioaddr->lbal_addr); + tf->lbam = ioread8(ioaddr->lbam_addr); + tf->lbah = ioread8(ioaddr->lbah_addr); + tf->device = ns87560_read_buggy(ioaddr->device_addr); + + if (tf->flags & ATA_TFLAG_LBA48) { + iowrite8(tf->ctl | ATA_HOB, ioaddr->ctl_addr); + tf->hob_feature = ioread8(ioaddr->error_addr); + tf->hob_nsect = ioread8(ioaddr->nsect_addr); + tf->hob_lbal = ioread8(ioaddr->lbal_addr); + tf->hob_lbam = ioread8(ioaddr->lbam_addr); + tf->hob_lbah = ioread8(ioaddr->lbah_addr); + iowrite8(tf->ctl, ioaddr->ctl_addr); + ap->last_ctl = tf->ctl; + } +} + +/** + * ns87560_bmdma_status + * @ap: channel to check + * + * Return the DMA status of the channel working around the + * 87560 flaws. + */ + +static u8 ns87560_bmdma_status(struct ata_port *ap) +{ + return ns87560_read_buggy(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); +} + +static const struct ata_port_operations ns87560_pata_ops = { + .set_piomode = ns87415_set_piomode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ns87560_tf_read, + .check_status = ns87560_check_status, + .check_atapi_dma = ns87415_check_atapi_dma, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + .cable_detect = ata_cable_40wire, + + .bmdma_setup = ns87415_bmdma_setup, + .bmdma_start = ns87415_bmdma_start, + .bmdma_stop = ns87415_bmdma_stop, + .bmdma_status = ns87560_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ns87415_bmdma_irq_clear, + .irq_on = ata_irq_on, + + .port_start = ata_sff_port_start, +}; + +#endif /* 87560 SuperIO Support */ + + +static const struct ata_port_operations ns87415_pata_ops = { + .set_piomode = ns87415_set_piomode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .check_atapi_dma = ns87415_check_atapi_dma, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + .cable_detect = ata_cable_40wire, + + .bmdma_setup = ns87415_bmdma_setup, + .bmdma_start = ns87415_bmdma_start, + .bmdma_stop = ns87415_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ns87415_bmdma_irq_clear, + .irq_on = ata_irq_on, + + .port_start = ata_sff_port_start, +}; + +static struct scsi_host_template ns87415_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, + .bios_param = ata_std_bios_param, +}; + + +/** + * ns87415_init_one - Register 87415 ATA PCI device with kernel services + * @pdev: PCI device to register + * @ent: Entry in ns87415_pci_tbl matching with @pdev + * + * Called from kernel PCI layer. We probe for combined mode (sigh), + * and then hand over control to libata, for it to do the rest. + * + * LOCKING: + * Inherited from PCI layer (may sleep). + * + * RETURNS: + * Zero on success, or -ERRNO value. + */ + +static int ns87415_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static int printed_version; + static const struct ata_port_info info = { + .sht = &ns87415_sht, + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .port_ops = &ns87415_pata_ops, + }; + const struct ata_port_info *ppi[] = { &info, NULL }; +#if defined(CONFIG_SUPERIO) + static const struct ata_port_info info87560 = { + .sht = &ns87415_sht, + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .port_ops = &ns87560_pata_ops, + }; + + if (PCI_SLOT(pdev->devfn) == 0x0E) + ppi[0] = &info87560; +#endif + if (!printed_version++) + dev_printk(KERN_DEBUG, &pdev->dev, + "version " DRV_VERSION "\n"); + /* Select 512 byte sectors */ + pci_write_config_byte(pdev, 0x55, 0xEE); + /* Select PIO0 8bit clocking */ + pci_write_config_byte(pdev, 0x54, 0xB7); + return ata_pci_init_one(pdev, ppi); +} + +static const struct pci_device_id ns87415_pci_tbl[] = { + { PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_87415), }, + + { } /* terminate list */ +}; + +static struct pci_driver ns87415_pci_driver = { + .name = DRV_NAME, + .id_table = ns87415_pci_tbl, + .probe = ns87415_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM + .suspend = ata_pci_device_suspend, + .resume = ata_pci_device_resume, +#endif +}; + +static int __init ns87415_init(void) +{ + return pci_register_driver(&ns87415_pci_driver); +} + +static void __exit ns87415_exit(void) +{ + pci_unregister_driver(&ns87415_pci_driver); +} + +module_init(ns87415_init); +module_exit(ns87415_exit); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("ATA low-level driver for NS87415 controllers"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, ns87415_pci_tbl); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c index 091a70a..3cd5eb2 100644 --- a/drivers/ata/pata_oldpiix.c +++ b/drivers/ata/pata_oldpiix.c @@ -29,14 +29,15 @@ /** * oldpiix_pre_reset - probe begin - * @ap: ATA port + * @link: ATA link * @deadline: deadline jiffies for the operation * * Set up cable type and use generic probe init */ -static int oldpiix_pre_reset(struct ata_port *ap, unsigned long deadline) +static int oldpiix_pre_reset(struct ata_link *link, unsigned long deadline) { + struct ata_port *ap = link->ap; struct pci_dev *pdev = to_pci_dev(ap->host->dev); static const struct pci_bits oldpiix_enable_bits[] = { { 0x41U, 1U, 0x80UL, 0x80UL }, /* port 0 */ @@ -46,7 +47,7 @@ static int oldpiix_pre_reset(struct ata_port *ap, unsigned long deadline) if (!pci_test_config_bits(pdev, &oldpiix_enable_bits[ap->port_no])) return -ENOENT; - return ata_std_prereset(ap, deadline); + return ata_std_prereset(link, deadline); } /** @@ -237,7 +238,6 @@ static struct scsi_host_template oldpiix_sht = { }; static const struct ata_port_operations oldpiix_pata_ops = { - .port_disable = ata_port_disable, .set_piomode = oldpiix_set_piomode, .set_dmamode = oldpiix_set_dmamode, .mode_filter = ata_pci_default_filter, @@ -265,9 +265,8 @@ static const struct ata_port_operations oldpiix_pata_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; diff --git a/drivers/ata/pata_opti.c b/drivers/ata/pata_opti.c index 458bf67..8f79447 100644 --- a/drivers/ata/pata_opti.c +++ b/drivers/ata/pata_opti.c @@ -46,14 +46,15 @@ enum { /** * opti_pre_reset - probe begin - * @ap: ATA port + * @link: ATA link * @deadline: deadline jiffies for the operation * * Set up cable type and use generic probe init */ -static int opti_pre_reset(struct ata_port *ap, unsigned long deadline) +static int opti_pre_reset(struct ata_link *link, unsigned long deadline) { + struct ata_port *ap = link->ap; struct pci_dev *pdev = to_pci_dev(ap->host->dev); static const struct pci_bits opti_enable_bits[] = { { 0x45, 1, 0x80, 0x00 }, @@ -63,7 +64,7 @@ static int opti_pre_reset(struct ata_port *ap, unsigned long deadline) if (!pci_test_config_bits(pdev, &opti_enable_bits[ap->port_no])) return -ENOENT; - return ata_std_prereset(ap, deadline); + return ata_std_prereset(link, deadline); } /** @@ -182,7 +183,6 @@ static struct scsi_host_template opti_sht = { }; static struct ata_port_operations opti_port_ops = { - .port_disable = ata_port_disable, .set_piomode = opti_set_piomode, .tf_load = ata_tf_load, .tf_read = ata_tf_read, @@ -209,9 +209,8 @@ static struct ata_port_operations opti_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; static int opti_init_one(struct pci_dev *dev, const struct pci_device_id *id) diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c index f89bdfd..6b07b5b 100644 --- a/drivers/ata/pata_optidma.c +++ b/drivers/ata/pata_optidma.c @@ -47,14 +47,15 @@ static int pci_clock; /* 0 = 33 1 = 25 */ /** * optidma_pre_reset - probe begin - * @ap: ATA port + * @link: ATA link * @deadline: deadline jiffies for the operation * * Set up cable type and use generic probe init */ -static int optidma_pre_reset(struct ata_port *ap, unsigned long deadline) +static int optidma_pre_reset(struct ata_link *link, unsigned long deadline) { + struct ata_port *ap = link->ap; struct pci_dev *pdev = to_pci_dev(ap->host->dev); static const struct pci_bits optidma_enable_bits = { 0x40, 1, 0x08, 0x00 @@ -63,7 +64,7 @@ static int optidma_pre_reset(struct ata_port *ap, unsigned long deadline) if (ap->port_no && !pci_test_config_bits(pdev, &optidma_enable_bits)) return -ENOENT; - return ata_std_prereset(ap, deadline); + return ata_std_prereset(link, deadline); } /** @@ -323,25 +324,26 @@ static u8 optidma_make_bits43(struct ata_device *adev) /** * optidma_set_mode - mode setup - * @ap: port to set up + * @link: link to set up * * Use the standard setup to tune the chipset and then finalise the * configuration by writing the nibble of extra bits of data into * the chip. */ -static int optidma_set_mode(struct ata_port *ap, struct ata_device **r_failed) +static int optidma_set_mode(struct ata_link *link, struct ata_device **r_failed) { + struct ata_port *ap = link->ap; u8 r; int nybble = 4 * ap->port_no; struct pci_dev *pdev = to_pci_dev(ap->host->dev); - int rc = ata_do_set_mode(ap, r_failed); + int rc = ata_do_set_mode(link, r_failed); if (rc == 0) { pci_read_config_byte(pdev, 0x43, &r); r &= (0x0F << nybble); - r |= (optidma_make_bits43(&ap->device[0]) + - (optidma_make_bits43(&ap->device[0]) << 2)) << nybble; + r |= (optidma_make_bits43(&link->device[0]) + + (optidma_make_bits43(&link->device[0]) << 2)) << nybble; pci_write_config_byte(pdev, 0x43, r); } return rc; @@ -366,7 +368,6 @@ static struct scsi_host_template optidma_sht = { }; static struct ata_port_operations optidma_port_ops = { - .port_disable = ata_port_disable, .set_piomode = optidma_set_pio_mode, .set_dmamode = optidma_set_dma_mode, @@ -396,13 +397,11 @@ static struct ata_port_operations optidma_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; static struct ata_port_operations optiplus_port_ops = { - .port_disable = ata_port_disable, .set_piomode = optiplus_set_pio_mode, .set_dmamode = optiplus_set_dma_mode, @@ -432,9 +431,8 @@ static struct ata_port_operations optiplus_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; /** diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index 0f2b027..782ff4a 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -56,7 +56,7 @@ struct ata_pcmcia_info { /** * pcmcia_set_mode - PCMCIA specific mode setup - * @ap: Port + * @link: link * @r_failed_dev: Return pointer for failed device * * Perform the tuning and setup of the devices and timings, which @@ -65,13 +65,13 @@ struct ata_pcmcia_info { * decode, which alas is embarrassingly common in the PC world */ -static int pcmcia_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev) +static int pcmcia_set_mode(struct ata_link *link, struct ata_device **r_failed_dev) { - struct ata_device *master = &ap->device[0]; - struct ata_device *slave = &ap->device[1]; + struct ata_device *master = &link->device[0]; + struct ata_device *slave = &link->device[1]; if (!ata_dev_enabled(master) || !ata_dev_enabled(slave)) - return ata_do_set_mode(ap, r_failed_dev); + return ata_do_set_mode(link, r_failed_dev); if (memcmp(master->id + ATA_ID_FW_REV, slave->id + ATA_ID_FW_REV, ATA_ID_FW_REV_LEN + ATA_ID_PROD_LEN) == 0) @@ -84,7 +84,7 @@ static int pcmcia_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev ata_dev_disable(slave); } } - return ata_do_set_mode(ap, r_failed_dev); + return ata_do_set_mode(link, r_failed_dev); } static struct scsi_host_template pcmcia_sht = { @@ -107,7 +107,6 @@ static struct scsi_host_template pcmcia_sht = { static struct ata_port_operations pcmcia_port_ops = { .set_mode = pcmcia_set_mode, - .port_disable = ata_port_disable, .tf_load = ata_tf_load, .tf_read = ata_tf_read, .check_status = ata_check_status, @@ -127,7 +126,6 @@ static struct ata_port_operations pcmcia_port_ops = { .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, .port_start = ata_sff_port_start, }; @@ -304,6 +302,8 @@ next_entry: ap->ioaddr.ctl_addr = ctl_addr; ata_std_ports(&ap->ioaddr); + ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io_base, ctl_base); + /* activate */ ret = ata_host_activate(host, pdev->irq.AssignedIRQ, ata_interrupt, IRQF_SHARED, &pcmcia_sht); diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c index bb64a98..3d3f155 100644 --- a/drivers/ata/pata_pdc2027x.c +++ b/drivers/ata/pata_pdc2027x.c @@ -69,7 +69,7 @@ static void pdc2027x_set_dmamode(struct ata_port *ap, struct ata_device *adev); static int pdc2027x_check_atapi_dma(struct ata_queued_cmd *qc); static unsigned long pdc2027x_mode_filter(struct ata_device *adev, unsigned long mask); static int pdc2027x_cable_detect(struct ata_port *ap); -static int pdc2027x_set_mode(struct ata_port *ap, struct ata_device **r_failed); +static int pdc2027x_set_mode(struct ata_link *link, struct ata_device **r_failed); /* * ATA Timing Tables based on 133MHz controller clock. @@ -147,7 +147,6 @@ static struct scsi_host_template pdc2027x_sht = { }; static struct ata_port_operations pdc2027x_pata100_ops = { - .port_disable = ata_port_disable, .mode_filter = ata_pci_default_filter, .tf_load = ata_tf_load, @@ -173,13 +172,11 @@ static struct ata_port_operations pdc2027x_pata100_ops = { .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; static struct ata_port_operations pdc2027x_pata133_ops = { - .port_disable = ata_port_disable, .set_piomode = pdc2027x_set_piomode, .set_dmamode = pdc2027x_set_dmamode, .set_mode = pdc2027x_set_mode, @@ -208,9 +205,8 @@ static struct ata_port_operations pdc2027x_pata133_ops = { .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; static struct ata_port_info pdc2027x_port_info[] = { @@ -277,7 +273,7 @@ static int pdc2027x_cable_detect(struct ata_port *ap) u32 cgcr; /* check cable detect results */ - cgcr = readl(port_mmio(ap, PDC_GLOBAL_CTL)); + cgcr = ioread32(port_mmio(ap, PDC_GLOBAL_CTL)); if (cgcr & (1 << 26)) goto cbl40; @@ -295,12 +291,12 @@ cbl40: */ static inline int pdc2027x_port_enabled(struct ata_port *ap) { - return readb(port_mmio(ap, PDC_ATA_CTL)) & 0x02; + return ioread8(port_mmio(ap, PDC_ATA_CTL)) & 0x02; } /** * pdc2027x_prereset - prereset for PATA host controller - * @ap: Target port + * @link: Target link * @deadline: deadline jiffies for the operation * * Probeinit including cable detection. @@ -309,12 +305,12 @@ static inline int pdc2027x_port_enabled(struct ata_port *ap) * None (inherited from caller). */ -static int pdc2027x_prereset(struct ata_port *ap, unsigned long deadline) +static int pdc2027x_prereset(struct ata_link *link, unsigned long deadline) { /* Check whether port enabled */ - if (!pdc2027x_port_enabled(ap)) + if (!pdc2027x_port_enabled(link->ap)) return -ENOENT; - return ata_std_prereset(ap, deadline); + return ata_std_prereset(link, deadline); } /** @@ -387,16 +383,16 @@ static void pdc2027x_set_piomode(struct ata_port *ap, struct ata_device *adev) /* Set the PIO timing registers using value table for 133MHz */ PDPRINTK("Set pio regs... \n"); - ctcr0 = readl(dev_mmio(ap, adev, PDC_CTCR0)); + ctcr0 = ioread32(dev_mmio(ap, adev, PDC_CTCR0)); ctcr0 &= 0xffff0000; ctcr0 |= pdc2027x_pio_timing_tbl[pio].value0 | (pdc2027x_pio_timing_tbl[pio].value1 << 8); - writel(ctcr0, dev_mmio(ap, adev, PDC_CTCR0)); + iowrite32(ctcr0, dev_mmio(ap, adev, PDC_CTCR0)); - ctcr1 = readl(dev_mmio(ap, adev, PDC_CTCR1)); + ctcr1 = ioread32(dev_mmio(ap, adev, PDC_CTCR1)); ctcr1 &= 0x00ffffff; ctcr1 |= (pdc2027x_pio_timing_tbl[pio].value2 << 24); - writel(ctcr1, dev_mmio(ap, adev, PDC_CTCR1)); + iowrite32(ctcr1, dev_mmio(ap, adev, PDC_CTCR1)); PDPRINTK("Set pio regs done\n"); @@ -430,18 +426,18 @@ static void pdc2027x_set_dmamode(struct ata_port *ap, struct ata_device *adev) * If tHOLD is '1', the hardware will add half clock for data hold time. * This code segment seems to be no effect. tHOLD will be overwritten below. */ - ctcr1 = readl(dev_mmio(ap, adev, PDC_CTCR1)); - writel(ctcr1 & ~(1 << 7), dev_mmio(ap, adev, PDC_CTCR1)); + ctcr1 = ioread32(dev_mmio(ap, adev, PDC_CTCR1)); + iowrite32(ctcr1 & ~(1 << 7), dev_mmio(ap, adev, PDC_CTCR1)); } PDPRINTK("Set udma regs... \n"); - ctcr1 = readl(dev_mmio(ap, adev, PDC_CTCR1)); + ctcr1 = ioread32(dev_mmio(ap, adev, PDC_CTCR1)); ctcr1 &= 0xff000000; ctcr1 |= pdc2027x_udma_timing_tbl[udma_mode].value0 | (pdc2027x_udma_timing_tbl[udma_mode].value1 << 8) | (pdc2027x_udma_timing_tbl[udma_mode].value2 << 16); - writel(ctcr1, dev_mmio(ap, adev, PDC_CTCR1)); + iowrite32(ctcr1, dev_mmio(ap, adev, PDC_CTCR1)); PDPRINTK("Set udma regs done\n"); @@ -453,13 +449,13 @@ static void pdc2027x_set_dmamode(struct ata_port *ap, struct ata_device *adev) unsigned int mdma_mode = dma_mode & 0x07; PDPRINTK("Set mdma regs... \n"); - ctcr0 = readl(dev_mmio(ap, adev, PDC_CTCR0)); + ctcr0 = ioread32(dev_mmio(ap, adev, PDC_CTCR0)); ctcr0 &= 0x0000ffff; ctcr0 |= (pdc2027x_mdma_timing_tbl[mdma_mode].value0 << 16) | (pdc2027x_mdma_timing_tbl[mdma_mode].value1 << 24); - writel(ctcr0, dev_mmio(ap, adev, PDC_CTCR0)); + iowrite32(ctcr0, dev_mmio(ap, adev, PDC_CTCR0)); PDPRINTK("Set mdma regs done\n"); PDPRINTK("Set to mdma mode[%u] \n", mdma_mode); @@ -470,24 +466,24 @@ static void pdc2027x_set_dmamode(struct ata_port *ap, struct ata_device *adev) /** * pdc2027x_set_mode - Set the timing registers back to correct values. - * @ap: Port to configure + * @link: link to configure * @r_failed: Returned device for failure * * The pdc2027x hardware will look at "SET FEATURES" and change the timing registers * automatically. The values set by the hardware might be incorrect, under 133Mhz PLL. * This function overwrites the possibly incorrect values set by the hardware to be correct. */ -static int pdc2027x_set_mode(struct ata_port *ap, struct ata_device **r_failed) +static int pdc2027x_set_mode(struct ata_link *link, struct ata_device **r_failed) { - int i; - - i = ata_do_set_mode(ap, r_failed); - if (i < 0) - return i; + struct ata_port *ap = link->ap; + struct ata_device *dev; + int rc; - for (i = 0; i < ATA_MAX_DEVICES; i++) { - struct ata_device *dev = &ap->device[i]; + rc = ata_do_set_mode(link, r_failed); + if (rc < 0) + return rc; + ata_link_for_each_dev(dev, link) { if (ata_dev_enabled(dev)) { pdc2027x_set_piomode(ap, dev); @@ -496,9 +492,9 @@ static int pdc2027x_set_mode(struct ata_port *ap, struct ata_device **r_failed) * Enable prefetch if the device support PIO only. */ if (dev->xfer_shift == ATA_SHIFT_PIO) { - u32 ctcr1 = readl(dev_mmio(ap, dev, PDC_CTCR1)); + u32 ctcr1 = ioread32(dev_mmio(ap, dev, PDC_CTCR1)); ctcr1 |= (1 << 25); - writel(ctcr1, dev_mmio(ap, dev, PDC_CTCR1)); + iowrite32(ctcr1, dev_mmio(ap, dev, PDC_CTCR1)); PDPRINTK("Turn on prefetch\n"); } else { @@ -563,14 +559,12 @@ static long pdc_read_counter(struct ata_host *host) u32 bccrl, bccrh, bccrlv, bccrhv; retry: - bccrl = readl(mmio_base + PDC_BYTE_COUNT) & 0x7fff; - bccrh = readl(mmio_base + PDC_BYTE_COUNT + 0x100) & 0x7fff; - rmb(); + bccrl = ioread32(mmio_base + PDC_BYTE_COUNT) & 0x7fff; + bccrh = ioread32(mmio_base + PDC_BYTE_COUNT + 0x100) & 0x7fff; /* Read the counter values again for verification */ - bccrlv = readl(mmio_base + PDC_BYTE_COUNT) & 0x7fff; - bccrhv = readl(mmio_base + PDC_BYTE_COUNT + 0x100) & 0x7fff; - rmb(); + bccrlv = ioread32(mmio_base + PDC_BYTE_COUNT) & 0x7fff; + bccrhv = ioread32(mmio_base + PDC_BYTE_COUNT + 0x100) & 0x7fff; counter = (bccrh << 15) | bccrl; @@ -619,7 +613,7 @@ static void pdc_adjust_pll(struct ata_host *host, long pll_clock, unsigned int b /* Show the current clock value of PLL control register * (maybe already configured by the firmware) */ - pll_ctl = readw(mmio_base + PDC_PLL_CTL); + pll_ctl = ioread16(mmio_base + PDC_PLL_CTL); PDPRINTK("pll_ctl[%X]\n", pll_ctl); #endif @@ -659,8 +653,8 @@ static void pdc_adjust_pll(struct ata_host *host, long pll_clock, unsigned int b PDPRINTK("Writing pll_ctl[%X]\n", pll_ctl); - writew(pll_ctl, mmio_base + PDC_PLL_CTL); - readw(mmio_base + PDC_PLL_CTL); /* flush */ + iowrite16(pll_ctl, mmio_base + PDC_PLL_CTL); + ioread16(mmio_base + PDC_PLL_CTL); /* flush */ /* Wait the PLL circuit to be stable */ mdelay(30); @@ -670,7 +664,7 @@ static void pdc_adjust_pll(struct ata_host *host, long pll_clock, unsigned int b * Show the current clock value of PLL control register * (maybe configured by the firmware) */ - pll_ctl = readw(mmio_base + PDC_PLL_CTL); + pll_ctl = ioread16(mmio_base + PDC_PLL_CTL); PDPRINTK("pll_ctl[%X]\n", pll_ctl); #endif @@ -693,10 +687,10 @@ static long pdc_detect_pll_input_clock(struct ata_host *host) long pll_clock, usec_elapsed; /* Start the test mode */ - scr = readl(mmio_base + PDC_SYS_CTL); + scr = ioread32(mmio_base + PDC_SYS_CTL); PDPRINTK("scr[%X]\n", scr); - writel(scr | (0x01 << 14), mmio_base + PDC_SYS_CTL); - readl(mmio_base + PDC_SYS_CTL); /* flush */ + iowrite32(scr | (0x01 << 14), mmio_base + PDC_SYS_CTL); + ioread32(mmio_base + PDC_SYS_CTL); /* flush */ /* Read current counter value */ start_count = pdc_read_counter(host); @@ -710,10 +704,10 @@ static long pdc_detect_pll_input_clock(struct ata_host *host) do_gettimeofday(&end_time); /* Stop the test mode */ - scr = readl(mmio_base + PDC_SYS_CTL); + scr = ioread32(mmio_base + PDC_SYS_CTL); PDPRINTK("scr[%X]\n", scr); - writel(scr & ~(0x01 << 14), mmio_base + PDC_SYS_CTL); - readl(mmio_base + PDC_SYS_CTL); /* flush */ + iowrite32(scr & ~(0x01 << 14), mmio_base + PDC_SYS_CTL); + ioread32(mmio_base + PDC_SYS_CTL); /* flush */ /* calculate the input clock in Hz */ usec_elapsed = (end_time.tv_sec - start_time.tv_sec) * 1000000 + @@ -745,9 +739,6 @@ static int pdc_hardware_init(struct ata_host *host, unsigned int board_idx) */ pll_clock = pdc_detect_pll_input_clock(host); - if (pll_clock < 0) /* counter overflow? Try again. */ - pll_clock = pdc_detect_pll_input_clock(host); - dev_printk(KERN_INFO, host->dev, "PLL input clock %ld kHz\n", pll_clock/1000); /* Adjust PLL control register */ @@ -791,12 +782,14 @@ static void pdc_ata_setup_port(struct ata_ioports *port, void __iomem *base) static int __devinit pdc2027x_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version; + static const unsigned long cmd_offset[] = { 0x17c0, 0x15c0 }; + static const unsigned long bmdma_offset[] = { 0x1000, 0x1008 }; unsigned int board_idx = (unsigned int) ent->driver_data; const struct ata_port_info *ppi[] = { &pdc2027x_port_info[board_idx], NULL }; struct ata_host *host; void __iomem *mmio_base; - int rc; + int i, rc; if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); @@ -826,10 +819,15 @@ static int __devinit pdc2027x_init_one(struct pci_dev *pdev, const struct pci_de mmio_base = host->iomap[PDC_MMIO_BAR]; - pdc_ata_setup_port(&host->ports[0]->ioaddr, mmio_base + 0x17c0); - host->ports[0]->ioaddr.bmdma_addr = mmio_base + 0x1000; - pdc_ata_setup_port(&host->ports[1]->ioaddr, mmio_base + 0x15c0); - host->ports[1]->ioaddr.bmdma_addr = mmio_base + 0x1008; + for (i = 0; i < 2; i++) { + struct ata_port *ap = host->ports[i]; + + pdc_ata_setup_port(&ap->ioaddr, mmio_base + cmd_offset[i]); + ap->ioaddr.bmdma_addr = mmio_base + bmdma_offset[i]; + + ata_port_pbar_desc(ap, PDC_MMIO_BAR, -1, "mmio"); + ata_port_pbar_desc(ap, PDC_MMIO_BAR, cmd_offset[i], "cmd"); + } //pci_enable_intx(pdev); diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c index 92447bed..65d9516 100644 --- a/drivers/ata/pata_pdc202xx_old.c +++ b/drivers/ata/pata_pdc202xx_old.c @@ -9,7 +9,7 @@ * First cut with LBA48/ATAPI * * TODO: - * Channel interlock/reset on both required + * Channel interlock/reset on both required ? */ #include <linux/kernel.h> @@ -22,7 +22,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_pdc202xx_old" -#define DRV_VERSION "0.4.2" +#define DRV_VERSION "0.4.3" static int pdc2026x_cable_detect(struct ata_port *ap) { @@ -106,9 +106,9 @@ static void pdc202xx_set_dmamode(struct ata_port *ap, struct ata_device *adev) { 0x20, 0x01 } }; static u8 mdma_timing[3][2] = { - { 0x60, 0x03 }, - { 0x60, 0x04 }, { 0xe0, 0x0f }, + { 0x60, 0x04 }, + { 0x60, 0x03 }, }; u8 r_bp, r_cp; @@ -139,6 +139,9 @@ static void pdc202xx_set_dmamode(struct ata_port *ap, struct ata_device *adev) * * In UDMA3 or higher we have to clock switch for the duration of the * DMA transfer sequence. + * + * Note: The host lock held by the libata layer protects + * us from two channels both trying to set DMA bits at once */ static void pdc2026x_bmdma_start(struct ata_queued_cmd *qc) @@ -187,6 +190,9 @@ static void pdc2026x_bmdma_start(struct ata_queued_cmd *qc) * * After a DMA completes we need to put the clock back to 33MHz for * PIO timings. + * + * Note: The host lock held by the libata layer protects + * us from two channels both trying to set DMA bits at once */ static void pdc2026x_bmdma_stop(struct ata_queued_cmd *qc) @@ -206,7 +212,6 @@ static void pdc2026x_bmdma_stop(struct ata_queued_cmd *qc) iowrite32(0, atapi_reg); iowrite8(ioread8(clock) & ~sel66, clock); } - /* Check we keep host level locking here */ /* Flip back to 33Mhz for PIO */ if (adev->dma_mode >= XFER_UDMA_2) iowrite8(ioread8(clock) & ~sel66, clock); @@ -247,7 +252,6 @@ static struct scsi_host_template pdc202xx_sht = { }; static struct ata_port_operations pdc2024x_port_ops = { - .port_disable = ata_port_disable, .set_piomode = pdc202xx_set_piomode, .set_dmamode = pdc202xx_set_dmamode, .mode_filter = ata_pci_default_filter, @@ -275,13 +279,11 @@ static struct ata_port_operations pdc2024x_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; static struct ata_port_operations pdc2026x_port_ops = { - .port_disable = ata_port_disable, .set_piomode = pdc202xx_set_piomode, .set_dmamode = pdc202xx_set_dmamode, .mode_filter = ata_pci_default_filter, @@ -310,9 +312,8 @@ static struct ata_port_operations pdc2026x_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; static int pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id) diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c index 5086d03..fc72a96 100644 --- a/drivers/ata/pata_platform.c +++ b/drivers/ata/pata_platform.c @@ -30,13 +30,11 @@ static int pio_mask = 1; * Provide our own set_mode() as we don't want to change anything that has * already been configured.. */ -static int pata_platform_set_mode(struct ata_port *ap, struct ata_device **unused) +static int pata_platform_set_mode(struct ata_link *link, struct ata_device **unused) { - int i; - - for (i = 0; i < ATA_MAX_DEVICES; i++) { - struct ata_device *dev = &ap->device[i]; + struct ata_device *dev; + ata_link_for_each_dev(dev, link) { if (ata_dev_enabled(dev)) { /* We don't really care */ dev->pio_mode = dev->xfer_mode = XFER_PIO_0; @@ -71,7 +69,6 @@ static struct scsi_host_template pata_platform_sht = { static struct ata_port_operations pata_platform_port_ops = { .set_mode = pata_platform_set_mode, - .port_disable = ata_port_disable, .tf_load = ata_tf_load, .tf_read = ata_tf_read, .check_status = ata_check_status, @@ -91,7 +88,6 @@ static struct ata_port_operations pata_platform_port_ops = { .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, .port_start = ata_dummy_ret0, }; @@ -209,9 +205,13 @@ static int __devinit pata_platform_probe(struct platform_device *pdev) ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr; - pp_info = (struct pata_platform_info *)(pdev->dev.platform_data); + pp_info = pdev->dev.platform_data; pata_platform_setup_port(&ap->ioaddr, pp_info); + ata_port_desc(ap, "%s cmd 0x%llx ctl 0x%llx", mmio ? "mmio" : "ioport", + (unsigned long long)io_res->start, + (unsigned long long)ctl_res->start); + /* activate */ return ata_host_activate(host, platform_get_irq(pdev, 0), ata_interrupt, pp_info ? pp_info->irq_flags diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c index 1998c19..7d4c696 100644 --- a/drivers/ata/pata_qdi.c +++ b/drivers/ata/pata_qdi.c @@ -126,7 +126,7 @@ static unsigned int qdi_qc_issue_prot(struct ata_queued_cmd *qc) static void qdi_data_xfer(struct ata_device *adev, unsigned char *buf, unsigned int buflen, int write_data) { - struct ata_port *ap = adev->ap; + struct ata_port *ap = adev->link->ap; int slop = buflen & 3; if (ata_id_has_dword_io(adev->id)) { @@ -170,7 +170,6 @@ static struct scsi_host_template qdi_sht = { }; static struct ata_port_operations qdi6500_port_ops = { - .port_disable = ata_port_disable, .set_piomode = qdi6500_set_piomode, .tf_load = ata_tf_load, @@ -192,13 +191,11 @@ static struct ata_port_operations qdi6500_port_ops = { .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; static struct ata_port_operations qdi6580_port_ops = { - .port_disable = ata_port_disable, .set_piomode = qdi6580_set_piomode, .tf_load = ata_tf_load, @@ -220,9 +217,8 @@ static struct ata_port_operations qdi6580_port_ops = { .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; /** @@ -238,6 +234,7 @@ static struct ata_port_operations qdi6580_port_ops = { static __init int qdi_init_one(unsigned long port, int type, unsigned long io, int irq, int fast) { + unsigned long ctl = io + 0x206; struct platform_device *pdev; struct ata_host *host; struct ata_port *ap; @@ -254,7 +251,7 @@ static __init int qdi_init_one(unsigned long port, int type, unsigned long io, i ret = -ENOMEM; io_addr = devm_ioport_map(&pdev->dev, io, 8); - ctl_addr = devm_ioport_map(&pdev->dev, io + 0x206, 1); + ctl_addr = devm_ioport_map(&pdev->dev, ctl, 1); if (!io_addr || !ctl_addr) goto fail; @@ -279,6 +276,8 @@ static __init int qdi_init_one(unsigned long port, int type, unsigned long io, i ap->ioaddr.ctl_addr = ctl_addr; ata_std_ports(&ap->ioaddr); + ata_port_desc(ap, "cmd %lx ctl %lx", io, ctl); + /* * Hook in a private data structure per channel */ diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c index 7d1aabe..d5b7649 100644 --- a/drivers/ata/pata_radisys.c +++ b/drivers/ata/pata_radisys.c @@ -203,7 +203,6 @@ static struct scsi_host_template radisys_sht = { }; static const struct ata_port_operations radisys_pata_ops = { - .port_disable = ata_port_disable, .set_piomode = radisys_set_piomode, .set_dmamode = radisys_set_dmamode, .mode_filter = ata_pci_default_filter, @@ -231,9 +230,8 @@ static const struct ata_port_operations radisys_pata_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c index 7632fcb..ba8a31c 100644 --- a/drivers/ata/pata_rz1000.c +++ b/drivers/ata/pata_rz1000.c @@ -26,7 +26,7 @@ /** * rz1000_set_mode - mode setting function - * @ap: ATA interface + * @link: ATA link * @unused: returned device on set_mode failure * * Use a non standard set_mode function. We don't want to be tuned. We @@ -34,12 +34,11 @@ * whacked out. */ -static int rz1000_set_mode(struct ata_port *ap, struct ata_device **unused) +static int rz1000_set_mode(struct ata_link *link, struct ata_device **unused) { - int i; + struct ata_device *dev; - for (i = 0; i < ATA_MAX_DEVICES; i++) { - struct ata_device *dev = &ap->device[i]; + ata_link_for_each_dev(dev, link) { if (ata_dev_enabled(dev)) { /* We don't really care */ dev->pio_mode = XFER_PIO_0; @@ -74,7 +73,6 @@ static struct scsi_host_template rz1000_sht = { static struct ata_port_operations rz1000_port_ops = { .set_mode = rz1000_set_mode, - .port_disable = ata_port_disable, .tf_load = ata_tf_load, .tf_read = ata_tf_read, .check_status = ata_check_status, @@ -100,9 +98,8 @@ static struct ata_port_operations rz1000_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; static int rz1000_fifo_disable(struct pci_dev *pdev) diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c index 5edf67b..21ebc48 100644 --- a/drivers/ata/pata_sc1200.c +++ b/drivers/ata/pata_sc1200.c @@ -197,7 +197,6 @@ static struct scsi_host_template sc1200_sht = { }; static struct ata_port_operations sc1200_port_ops = { - .port_disable = ata_port_disable, .set_piomode = sc1200_set_piomode, .set_dmamode = sc1200_set_dmamode, .mode_filter = ata_pci_default_filter, @@ -227,9 +226,8 @@ static struct ata_port_operations sc1200_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; /** diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c index 2d048ef..5557613 100644 --- a/drivers/ata/pata_scc.c +++ b/drivers/ata/pata_scc.c @@ -603,16 +603,17 @@ static unsigned int scc_bus_softreset(struct ata_port *ap, unsigned int devmask, * Note: Original code is ata_std_softreset(). */ -static int scc_std_softreset (struct ata_port *ap, unsigned int *classes, - unsigned long deadline) +static int scc_std_softreset(struct ata_link *link, unsigned int *classes, + unsigned long deadline) { + struct ata_port *ap = link->ap; unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS; unsigned int devmask = 0, err_mask; u8 err; DPRINTK("ENTER\n"); - if (ata_port_offline(ap)) { + if (ata_link_offline(link)) { classes[0] = ATA_DEV_NONE; goto out; } @@ -636,9 +637,11 @@ static int scc_std_softreset (struct ata_port *ap, unsigned int *classes, } /* determine by signature whether we have ATA or ATAPI devices */ - classes[0] = ata_dev_try_classify(ap, 0, &err); + classes[0] = ata_dev_try_classify(&ap->link.device[0], + devmask & (1 << 0), &err); if (slave_possible && err != 0x81) - classes[1] = ata_dev_try_classify(ap, 1, &err); + classes[1] = ata_dev_try_classify(&ap->link.device[1], + devmask & (1 << 1), &err); out: DPRINTK("EXIT, classes[0]=%u [1]=%u\n", classes[0], classes[1]); @@ -701,7 +704,7 @@ static void scc_bmdma_stop (struct ata_queued_cmd *qc) printk(KERN_WARNING "%s: Internal Bus Error\n", DRV_NAME); out_be32(bmid_base + SCC_DMA_INTST, INTSTS_BMSINT); /* TBD: SW reset */ - scc_std_softreset(ap, &classes, deadline); + scc_std_softreset(&ap->link, &classes, deadline); continue; } @@ -740,7 +743,7 @@ static u8 scc_bmdma_status (struct ata_port *ap) void __iomem *mmio = ap->ioaddr.bmdma_addr; u8 host_stat = in_be32(mmio + SCC_DMA_STATUS); u32 int_status = in_be32(mmio + SCC_DMA_INTST); - struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag); + struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->link.active_tag); static int retry = 0; /* return if IOS_SS is cleared */ @@ -785,7 +788,7 @@ static u8 scc_bmdma_status (struct ata_port *ap) static void scc_data_xfer (struct ata_device *adev, unsigned char *buf, unsigned int buflen, int write_data) { - struct ata_port *ap = adev->ap; + struct ata_port *ap = adev->link->ap; unsigned int words = buflen >> 1; unsigned int i; u16 *buf16 = (u16 *) buf; @@ -839,38 +842,6 @@ static u8 scc_irq_on (struct ata_port *ap) } /** - * scc_irq_ack - Acknowledge a device interrupt. - * @ap: Port on which interrupts are enabled. - * - * Note: Original code is ata_irq_ack(). - */ - -static u8 scc_irq_ack (struct ata_port *ap, unsigned int chk_drq) -{ - unsigned int bits = chk_drq ? ATA_BUSY | ATA_DRQ : ATA_BUSY; - u8 host_stat, post_stat, status; - - status = ata_busy_wait(ap, bits, 1000); - if (status & bits) - if (ata_msg_err(ap)) - printk(KERN_ERR "abnormal status 0x%X\n", status); - - /* get controller status; clear intr, err bits */ - host_stat = in_be32(ap->ioaddr.bmdma_addr + SCC_DMA_STATUS); - out_be32(ap->ioaddr.bmdma_addr + SCC_DMA_STATUS, - host_stat | ATA_DMA_INTR | ATA_DMA_ERR); - - post_stat = in_be32(ap->ioaddr.bmdma_addr + SCC_DMA_STATUS); - - if (ata_msg_intr(ap)) - printk(KERN_INFO "%s: irq ack: host_stat 0x%X, new host_stat 0x%X, drv_stat 0x%X\n", - __FUNCTION__, - host_stat, post_stat, status); - - return status; -} - -/** * scc_bmdma_freeze - Freeze BMDMA controller port * @ap: port to freeze * @@ -901,10 +872,10 @@ static void scc_bmdma_freeze (struct ata_port *ap) * @deadline: deadline jiffies for the operation */ -static int scc_pata_prereset(struct ata_port *ap, unsigned long deadline) +static int scc_pata_prereset(struct ata_link *link, unsigned long deadline) { - ap->cbl = ATA_CBL_PATA80; - return ata_std_prereset(ap, deadline); + link->ap->cbl = ATA_CBL_PATA80; + return ata_std_prereset(link, deadline); } /** @@ -915,8 +886,10 @@ static int scc_pata_prereset(struct ata_port *ap, unsigned long deadline) * Note: Original code is ata_std_postreset(). */ -static void scc_std_postreset (struct ata_port *ap, unsigned int *classes) +static void scc_std_postreset(struct ata_link *link, unsigned int *classes) { + struct ata_port *ap = link->ap; + DPRINTK("ENTER\n"); /* is double-select really necessary? */ @@ -1020,7 +993,6 @@ static struct scsi_host_template scc_sht = { }; static const struct ata_port_operations scc_pata_ops = { - .port_disable = ata_port_disable, .set_piomode = scc_set_piomode, .set_dmamode = scc_set_dmamode, .mode_filter = scc_mode_filter, @@ -1047,7 +1019,6 @@ static const struct ata_port_operations scc_pata_ops = { .irq_clear = scc_bmdma_irq_clear, .irq_on = scc_irq_on, - .irq_ack = scc_irq_ack, .port_start = scc_port_start, .port_stop = scc_port_stop, @@ -1193,6 +1164,9 @@ static int scc_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) return rc; host->iomap = pcim_iomap_table(pdev); + ata_port_pbar_desc(host->ports[0], SCC_CTRL_BAR, -1, "ctrl"); + ata_port_pbar_desc(host->ports[0], SCC_BMID_BAR, -1, "bmid"); + rc = scc_host_init(host); if (rc) return rc; diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c index 0faf99c..df68806 100644 --- a/drivers/ata/pata_serverworks.c +++ b/drivers/ata/pata_serverworks.c @@ -318,7 +318,6 @@ static struct scsi_host_template serverworks_sht = { }; static struct ata_port_operations serverworks_osb4_port_ops = { - .port_disable = ata_port_disable, .set_piomode = serverworks_set_piomode, .set_dmamode = serverworks_set_dmamode, .mode_filter = serverworks_osb4_filter, @@ -348,13 +347,11 @@ static struct ata_port_operations serverworks_osb4_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; static struct ata_port_operations serverworks_csb_port_ops = { - .port_disable = ata_port_disable, .set_piomode = serverworks_set_piomode, .set_dmamode = serverworks_set_dmamode, .mode_filter = serverworks_csb_filter, @@ -384,9 +381,8 @@ static struct ata_port_operations serverworks_csb_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; static int serverworks_fixup_osb4(struct pci_dev *pdev) diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c index 4039580..2eb75cd 100644 --- a/drivers/ata/pata_sil680.c +++ b/drivers/ata/pata_sil680.c @@ -95,15 +95,16 @@ static int sil680_cable_detect(struct ata_port *ap) { /** * sil680_bus_reset - reset the SIL680 bus - * @ap: ATA port to reset + * @link: ATA link to reset * @deadline: deadline jiffies for the operation * * Perform the SIL680 housekeeping when doing an ATA bus reset */ -static int sil680_bus_reset(struct ata_port *ap,unsigned int *classes, +static int sil680_bus_reset(struct ata_link *link, unsigned int *classes, unsigned long deadline) { + struct ata_port *ap = link->ap; struct pci_dev *pdev = to_pci_dev(ap->host->dev); unsigned long addr = sil680_selreg(ap, 0); u8 reset; @@ -112,7 +113,7 @@ static int sil680_bus_reset(struct ata_port *ap,unsigned int *classes, pci_write_config_byte(pdev, addr, reset | 0x03); udelay(25); pci_write_config_byte(pdev, addr, reset); - return ata_std_softreset(ap, classes, deadline); + return ata_std_softreset(link, classes, deadline); } static void sil680_error_handler(struct ata_port *ap) @@ -237,7 +238,6 @@ static struct scsi_host_template sil680_sht = { }; static struct ata_port_operations sil680_port_ops = { - .port_disable = ata_port_disable, .set_piomode = sil680_set_piomode, .set_dmamode = sil680_set_dmamode, .mode_filter = ata_pci_default_filter, @@ -266,9 +266,8 @@ static struct ata_port_operations sil680_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; /** diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c index cce2834..3b5be77 100644 --- a/drivers/ata/pata_sis.c +++ b/drivers/ata/pata_sis.c @@ -84,7 +84,7 @@ static int sis_short_ata40(struct pci_dev *dev) static int sis_old_port_base(struct ata_device *adev) { - return 0x40 + (4 * adev->ap->port_no) + (2 * adev->devno); + return 0x40 + (4 * adev->link->ap->port_no) + (2 * adev->devno); } /** @@ -133,19 +133,20 @@ static int sis_66_cable_detect(struct ata_port *ap) /** * sis_pre_reset - probe begin - * @ap: ATA port + * @link: ATA link * @deadline: deadline jiffies for the operation * * Set up cable type and use generic probe init */ -static int sis_pre_reset(struct ata_port *ap, unsigned long deadline) +static int sis_pre_reset(struct ata_link *link, unsigned long deadline) { static const struct pci_bits sis_enable_bits[] = { { 0x4aU, 1U, 0x02UL, 0x02UL }, /* port 0 */ { 0x4aU, 1U, 0x04UL, 0x04UL }, /* port 1 */ }; + struct ata_port *ap = link->ap; struct pci_dev *pdev = to_pci_dev(ap->host->dev); if (!pci_test_config_bits(pdev, &sis_enable_bits[ap->port_no])) @@ -154,7 +155,7 @@ static int sis_pre_reset(struct ata_port *ap, unsigned long deadline) /* Clear the FIFO settings. We can't enable the FIFO until we know we are poking at a disk */ pci_write_config_byte(pdev, 0x4B, 0); - return ata_std_prereset(ap, deadline); + return ata_std_prereset(link, deadline); } @@ -530,7 +531,6 @@ static struct scsi_host_template sis_sht = { }; static const struct ata_port_operations sis_133_ops = { - .port_disable = ata_port_disable, .set_piomode = sis_133_set_piomode, .set_dmamode = sis_133_set_dmamode, .mode_filter = ata_pci_default_filter, @@ -558,13 +558,11 @@ static const struct ata_port_operations sis_133_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; static const struct ata_port_operations sis_133_for_sata_ops = { - .port_disable = ata_port_disable, .set_piomode = sis_133_set_piomode, .set_dmamode = sis_133_set_dmamode, .mode_filter = ata_pci_default_filter, @@ -592,13 +590,11 @@ static const struct ata_port_operations sis_133_for_sata_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; static const struct ata_port_operations sis_133_early_ops = { - .port_disable = ata_port_disable, .set_piomode = sis_100_set_piomode, .set_dmamode = sis_133_early_set_dmamode, .mode_filter = ata_pci_default_filter, @@ -626,13 +622,11 @@ static const struct ata_port_operations sis_133_early_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; static const struct ata_port_operations sis_100_ops = { - .port_disable = ata_port_disable, .set_piomode = sis_100_set_piomode, .set_dmamode = sis_100_set_dmamode, .mode_filter = ata_pci_default_filter, @@ -660,13 +654,11 @@ static const struct ata_port_operations sis_100_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; static const struct ata_port_operations sis_66_ops = { - .port_disable = ata_port_disable, .set_piomode = sis_old_set_piomode, .set_dmamode = sis_66_set_dmamode, .mode_filter = ata_pci_default_filter, @@ -694,13 +686,11 @@ static const struct ata_port_operations sis_66_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; static const struct ata_port_operations sis_old_ops = { - .port_disable = ata_port_disable, .set_piomode = sis_old_set_piomode, .set_dmamode = sis_old_set_dmamode, .mode_filter = ata_pci_default_filter, @@ -728,9 +718,8 @@ static const struct ata_port_operations sis_old_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; static const struct ata_port_info sis_info = { diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c index c0f43bb..1388cef5 100644 --- a/drivers/ata/pata_sl82c105.c +++ b/drivers/ata/pata_sl82c105.c @@ -43,23 +43,24 @@ enum { /** * sl82c105_pre_reset - probe begin - * @ap: ATA port + * @link: ATA link * @deadline: deadline jiffies for the operation * * Set up cable type and use generic probe init */ -static int sl82c105_pre_reset(struct ata_port *ap, unsigned long deadline) +static int sl82c105_pre_reset(struct ata_link *link, unsigned long deadline) { static const struct pci_bits sl82c105_enable_bits[] = { { 0x40, 1, 0x01, 0x01 }, { 0x40, 1, 0x10, 0x10 } }; + struct ata_port *ap = link->ap; struct pci_dev *pdev = to_pci_dev(ap->host->dev); if (ap->port_no && !pci_test_config_bits(pdev, &sl82c105_enable_bits[ap->port_no])) return -ENOENT; - return ata_std_prereset(ap, deadline); + return ata_std_prereset(link, deadline); } @@ -224,7 +225,6 @@ static struct scsi_host_template sl82c105_sht = { }; static struct ata_port_operations sl82c105_port_ops = { - .port_disable = ata_port_disable, .set_piomode = sl82c105_set_piomode, .mode_filter = ata_pci_default_filter, @@ -253,9 +253,8 @@ static struct ata_port_operations sl82c105_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; /** diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c index af21f44..403eafc 100644 --- a/drivers/ata/pata_triflex.c +++ b/drivers/ata/pata_triflex.c @@ -47,25 +47,26 @@ /** * triflex_prereset - probe begin - * @ap: ATA port + * @link: ATA link * @deadline: deadline jiffies for the operation * * Set up cable type and use generic probe init */ -static int triflex_prereset(struct ata_port *ap, unsigned long deadline) +static int triflex_prereset(struct ata_link *link, unsigned long deadline) { static const struct pci_bits triflex_enable_bits[] = { { 0x80, 1, 0x01, 0x01 }, { 0x80, 1, 0x02, 0x02 } }; + struct ata_port *ap = link->ap; struct pci_dev *pdev = to_pci_dev(ap->host->dev); if (!pci_test_config_bits(pdev, &triflex_enable_bits[ap->port_no])) return -ENOENT; - return ata_std_prereset(ap, deadline); + return ata_std_prereset(link, deadline); } @@ -197,7 +198,6 @@ static struct scsi_host_template triflex_sht = { }; static struct ata_port_operations triflex_port_ops = { - .port_disable = ata_port_disable, .set_piomode = triflex_set_piomode, .mode_filter = ata_pci_default_filter, @@ -226,9 +226,8 @@ static struct ata_port_operations triflex_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; static int triflex_init_one(struct pci_dev *dev, const struct pci_device_id *id) diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c index f143db4..5d41b66 100644 --- a/drivers/ata/pata_via.c +++ b/drivers/ata/pata_via.c @@ -184,11 +184,15 @@ static int via_cable_detect(struct ata_port *ap) { two drives */ if (ata66 & (0x10100000 >> (16 * ap->port_no))) return ATA_CBL_PATA80; + /* Check with ACPI so we can spot BIOS reported SATA bridges */ + if (ata_acpi_cbl_80wire(ap)) + return ATA_CBL_PATA80; return ATA_CBL_PATA40; } -static int via_pre_reset(struct ata_port *ap, unsigned long deadline) +static int via_pre_reset(struct ata_link *link, unsigned long deadline) { + struct ata_port *ap = link->ap; const struct via_isa_bridge *config = ap->host->private_data; if (!(config->flags & VIA_NO_ENABLES)) { @@ -201,7 +205,7 @@ static int via_pre_reset(struct ata_port *ap, unsigned long deadline) return -ENOENT; } - return ata_std_prereset(ap, deadline); + return ata_std_prereset(link, deadline); } @@ -344,7 +348,6 @@ static struct scsi_host_template via_sht = { }; static struct ata_port_operations via_port_ops = { - .port_disable = ata_port_disable, .set_piomode = via_set_piomode, .set_dmamode = via_set_dmamode, .mode_filter = ata_pci_default_filter, @@ -374,13 +377,11 @@ static struct ata_port_operations via_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; static struct ata_port_operations via_port_ops_noirq = { - .port_disable = ata_port_disable, .set_piomode = via_set_piomode, .set_dmamode = via_set_dmamode, .mode_filter = ata_pci_default_filter, @@ -410,9 +411,8 @@ static struct ata_port_operations via_port_ops_noirq = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; /** diff --git a/drivers/ata/pata_winbond.c b/drivers/ata/pata_winbond.c index 83abfec..549cbbe 100644 --- a/drivers/ata/pata_winbond.c +++ b/drivers/ata/pata_winbond.c @@ -94,7 +94,7 @@ static void winbond_set_piomode(struct ata_port *ap, struct ata_device *adev) static void winbond_data_xfer(struct ata_device *adev, unsigned char *buf, unsigned int buflen, int write_data) { - struct ata_port *ap = adev->ap; + struct ata_port *ap = adev->link->ap; int slop = buflen & 3; if (ata_id_has_dword_io(adev->id)) { @@ -138,7 +138,6 @@ static struct scsi_host_template winbond_sht = { }; static struct ata_port_operations winbond_port_ops = { - .port_disable = ata_port_disable, .set_piomode = winbond_set_piomode, .tf_load = ata_tf_load, @@ -160,9 +159,8 @@ static struct ata_port_operations winbond_port_ops = { .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; /** @@ -199,6 +197,7 @@ static __init int winbond_init_one(unsigned long port) for (i = 0; i < 2 ; i ++) { unsigned long cmd_port = 0x1F0 - (0x80 * i); + unsigned long ctl_port = cmd_port + 0x206; struct ata_host *host; struct ata_port *ap; void __iomem *cmd_addr, *ctl_addr; @@ -214,14 +213,16 @@ static __init int winbond_init_one(unsigned long port) host = ata_host_alloc(&pdev->dev, 1); if (!host) goto err_unregister; + ap = host->ports[0]; rc = -ENOMEM; cmd_addr = devm_ioport_map(&pdev->dev, cmd_port, 8); - ctl_addr = devm_ioport_map(&pdev->dev, cmd_port + 0x0206, 1); + ctl_addr = devm_ioport_map(&pdev->dev, ctl_port, 1); if (!cmd_addr || !ctl_addr) goto err_unregister; - ap = host->ports[0]; + ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", cmd_port, ctl_port); + ap->ops = &winbond_port_ops; ap->pio_mask = 0x1F; ap->flags |= ATA_FLAG_SLAVE_POSS; diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c index 5c79271..8d1b03d 100644 --- a/drivers/ata/pdc_adma.c +++ b/drivers/ata/pdc_adma.c @@ -92,6 +92,8 @@ enum { /* CPB bits */ cDONE = (1 << 0), + cATERR = (1 << 3), + cVLD = (1 << 0), cDAT = (1 << 2), cIEN = (1 << 3), @@ -131,14 +133,15 @@ static int adma_ata_init_one (struct pci_dev *pdev, static int adma_port_start(struct ata_port *ap); static void adma_host_stop(struct ata_host *host); static void adma_port_stop(struct ata_port *ap); -static void adma_phy_reset(struct ata_port *ap); static void adma_qc_prep(struct ata_queued_cmd *qc); static unsigned int adma_qc_issue(struct ata_queued_cmd *qc); static int adma_check_atapi_dma(struct ata_queued_cmd *qc); static void adma_bmdma_stop(struct ata_queued_cmd *qc); static u8 adma_bmdma_status(struct ata_port *ap); static void adma_irq_clear(struct ata_port *ap); -static void adma_eng_timeout(struct ata_port *ap); +static void adma_freeze(struct ata_port *ap); +static void adma_thaw(struct ata_port *ap); +static void adma_error_handler(struct ata_port *ap); static struct scsi_host_template adma_ata_sht = { .module = THIS_MODULE, @@ -159,21 +162,20 @@ static struct scsi_host_template adma_ata_sht = { }; static const struct ata_port_operations adma_ata_ops = { - .port_disable = ata_port_disable, .tf_load = ata_tf_load, .tf_read = ata_tf_read, .exec_command = ata_exec_command, .check_status = ata_check_status, .dev_select = ata_std_dev_select, - .phy_reset = adma_phy_reset, .check_atapi_dma = adma_check_atapi_dma, .data_xfer = ata_data_xfer, .qc_prep = adma_qc_prep, .qc_issue = adma_qc_issue, - .eng_timeout = adma_eng_timeout, + .freeze = adma_freeze, + .thaw = adma_thaw, + .error_handler = adma_error_handler, .irq_clear = adma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, .port_start = adma_port_start, .port_stop = adma_port_stop, .host_stop = adma_host_stop, @@ -184,7 +186,7 @@ static const struct ata_port_operations adma_ata_ops = { static struct ata_port_info adma_port_info[] = { /* board_1841_idx */ { - .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | ATA_FLAG_PIO_POLLING, .pio_mask = 0x10, /* pio4 */ @@ -273,24 +275,42 @@ static inline void adma_enter_reg_mode(struct ata_port *ap) readb(chan + ADMA_STATUS); /* flush */ } -static void adma_phy_reset(struct ata_port *ap) +static void adma_freeze(struct ata_port *ap) { - struct adma_port_priv *pp = ap->private_data; + void __iomem *chan = ADMA_PORT_REGS(ap); + + /* mask/clear ATA interrupts */ + writeb(ATA_NIEN, ap->ioaddr.ctl_addr); + ata_check_status(ap); - pp->state = adma_state_idle; + /* reset ADMA to idle state */ + writew(aPIOMD4 | aNIEN | aRSTADM, chan + ADMA_CONTROL); + udelay(2); + writew(aPIOMD4 | aNIEN, chan + ADMA_CONTROL); + udelay(2); +} + +static void adma_thaw(struct ata_port *ap) +{ adma_reinit_engine(ap); - ata_port_probe(ap); - ata_bus_reset(ap); } -static void adma_eng_timeout(struct ata_port *ap) +static int adma_prereset(struct ata_link *link, unsigned long deadline) { + struct ata_port *ap = link->ap; struct adma_port_priv *pp = ap->private_data; if (pp->state != adma_state_idle) /* healthy paranoia */ pp->state = adma_state_mmio; adma_reinit_engine(ap); - ata_eng_timeout(ap); + + return ata_std_prereset(link, deadline); +} + +static void adma_error_handler(struct ata_port *ap) +{ + ata_do_eh(ap, adma_prereset, ata_std_softreset, NULL, + ata_std_postreset); } static int adma_fill_sg(struct ata_queued_cmd *qc) @@ -464,14 +484,33 @@ static inline unsigned int adma_intr_pkt(struct ata_host *host) pp = ap->private_data; if (!pp || pp->state != adma_state_pkt) continue; - qc = ata_qc_from_tag(ap, ap->active_tag); + qc = ata_qc_from_tag(ap, ap->link.active_tag); if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) { - if ((status & (aPERR | aPSD | aUIRQ))) + if (status & aPERR) + qc->err_mask |= AC_ERR_HOST_BUS; + else if ((status & (aPSD | aUIRQ))) qc->err_mask |= AC_ERR_OTHER; + + if (pp->pkt[0] & cATERR) + qc->err_mask |= AC_ERR_DEV; else if (pp->pkt[0] != cDONE) qc->err_mask |= AC_ERR_OTHER; - ata_qc_complete(qc); + if (!qc->err_mask) + ata_qc_complete(qc); + else { + struct ata_eh_info *ehi = &ap->link.eh_info; + ata_ehi_clear_desc(ehi); + ata_ehi_push_desc(ehi, + "ADMA-status 0x%02X", status); + ata_ehi_push_desc(ehi, + "pkt[0] 0x%02X", pp->pkt[0]); + + if (qc->err_mask == AC_ERR_DEV) + ata_port_abort(ap); + else + ata_port_freeze(ap); + } } } return handled; @@ -489,7 +528,7 @@ static inline unsigned int adma_intr_mmio(struct ata_host *host) struct adma_port_priv *pp = ap->private_data; if (!pp || pp->state != adma_state_mmio) continue; - qc = ata_qc_from_tag(ap, ap->active_tag); + qc = ata_qc_from_tag(ap, ap->link.active_tag); if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) { /* check main status, clearing INTRQ */ @@ -502,7 +541,20 @@ static inline unsigned int adma_intr_mmio(struct ata_host *host) /* complete taskfile transaction */ pp->state = adma_state_idle; qc->err_mask |= ac_err_mask(status); - ata_qc_complete(qc); + if (!qc->err_mask) + ata_qc_complete(qc); + else { + struct ata_eh_info *ehi = + &ap->link.eh_info; + ata_ehi_clear_desc(ehi); + ata_ehi_push_desc(ehi, + "status 0x%02X", status); + + if (qc->err_mask == AC_ERR_DEV) + ata_port_abort(ap); + else + ata_port_freeze(ap); + } handled = 1; } } @@ -652,9 +704,16 @@ static int adma_ata_init_one(struct pci_dev *pdev, if (rc) return rc; - for (port_no = 0; port_no < ADMA_PORTS; ++port_no) - adma_ata_setup_port(&host->ports[port_no]->ioaddr, - ADMA_ATA_REGS(mmio_base, port_no)); + for (port_no = 0; port_no < ADMA_PORTS; ++port_no) { + struct ata_port *ap = host->ports[port_no]; + void __iomem *port_base = ADMA_ATA_REGS(mmio_base, port_no); + unsigned int offset = port_base - mmio_base; + + adma_ata_setup_port(&ap->ioaddr, port_base); + + ata_port_pbar_desc(ap, ADMA_MMIO_BAR, -1, "mmio"); + ata_port_pbar_desc(ap, ADMA_MMIO_BAR, offset, "port"); + } /* initialize adapter */ adma_host_init(host, board_idx); diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c index fdbed8e..08595f3 100644 --- a/drivers/ata/sata_inic162x.c +++ b/drivers/ata/sata_inic162x.c @@ -285,7 +285,7 @@ static void inic_irq_clear(struct ata_port *ap) static void inic_host_intr(struct ata_port *ap) { void __iomem *port_base = inic_port_base(ap); - struct ata_eh_info *ehi = &ap->eh_info; + struct ata_eh_info *ehi = &ap->link.eh_info; u8 irq_stat; /* fetch and clear irq */ @@ -293,7 +293,8 @@ static void inic_host_intr(struct ata_port *ap) writeb(irq_stat, port_base + PORT_IRQ_STAT); if (likely(!(irq_stat & PIRQ_ERR))) { - struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag); + struct ata_queued_cmd *qc = + ata_qc_from_tag(ap, ap->link.active_tag); if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) { ata_chk_status(ap); /* clear ATA interrupt */ @@ -416,12 +417,13 @@ static void inic_thaw(struct ata_port *ap) * SRST and SControl hardreset don't give valid signature on this * controller. Only controller specific hardreset mechanism works. */ -static int inic_hardreset(struct ata_port *ap, unsigned int *class, +static int inic_hardreset(struct ata_link *link, unsigned int *class, unsigned long deadline) { + struct ata_port *ap = link->ap; void __iomem *port_base = inic_port_base(ap); void __iomem *idma_ctl = port_base + PORT_IDMA_CTL; - const unsigned long *timing = sata_ehc_deb_timing(&ap->eh_context); + const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context); u16 val; int rc; @@ -434,15 +436,15 @@ static int inic_hardreset(struct ata_port *ap, unsigned int *class, msleep(1); writew(val & ~IDMA_CTL_RST_ATA, idma_ctl); - rc = sata_phy_resume(ap, timing, deadline); + rc = sata_link_resume(link, timing, deadline); if (rc) { - ata_port_printk(ap, KERN_WARNING, "failed to resume " + ata_link_printk(link, KERN_WARNING, "failed to resume " "link after reset (errno=%d)\n", rc); return rc; } *class = ATA_DEV_NONE; - if (ata_port_online(ap)) { + if (ata_link_online(link)) { struct ata_taskfile tf; /* wait a while before checking status */ @@ -451,7 +453,7 @@ static int inic_hardreset(struct ata_port *ap, unsigned int *class, rc = ata_wait_ready(ap, deadline); /* link occupied, -ENODEV too is an error */ if (rc) { - ata_port_printk(ap, KERN_WARNING, "device not ready " + ata_link_printk(link, KERN_WARNING, "device not ready " "after hardreset (errno=%d)\n", rc); return rc; } @@ -550,7 +552,6 @@ static int inic_port_start(struct ata_port *ap) } static struct ata_port_operations inic_port_ops = { - .port_disable = ata_port_disable, .tf_load = ata_tf_load, .tf_read = ata_tf_read, .check_status = ata_check_status, @@ -567,7 +568,6 @@ static struct ata_port_operations inic_port_ops = { .irq_clear = inic_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, .qc_prep = ata_qc_prep, .qc_issue = inic_qc_issue, @@ -693,16 +693,24 @@ static int inic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) host->iomap = iomap = pcim_iomap_table(pdev); for (i = 0; i < NR_PORTS; i++) { - struct ata_ioports *port = &host->ports[i]->ioaddr; - void __iomem *port_base = iomap[MMIO_BAR] + i * PORT_SIZE; + struct ata_port *ap = host->ports[i]; + struct ata_ioports *port = &ap->ioaddr; + unsigned int offset = i * PORT_SIZE; port->cmd_addr = iomap[2 * i]; port->altstatus_addr = port->ctl_addr = (void __iomem *) ((unsigned long)iomap[2 * i + 1] | ATA_PCI_CTL_OFS); - port->scr_addr = port_base + PORT_SCR; + port->scr_addr = iomap[MMIO_BAR] + offset + PORT_SCR; ata_std_ports(port); + + ata_port_pbar_desc(ap, MMIO_BAR, -1, "mmio"); + ata_port_pbar_desc(ap, MMIO_BAR, offset, "port"); + ata_port_desc(ap, "cmd 0x%llx ctl 0x%llx", + (unsigned long long)pci_resource_start(pdev, 2 * i), + (unsigned long long)pci_resource_start(pdev, (2 * i + 1)) | + ATA_PCI_CTL_OFS); } hpriv->cached_hctl = readw(iomap[MMIO_BAR] + HOST_CTL); diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index d9832e2..4df8311 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -483,8 +483,6 @@ static struct scsi_host_template mv6_sht = { }; static const struct ata_port_operations mv5_ops = { - .port_disable = ata_port_disable, - .tf_load = ata_tf_load, .tf_read = ata_tf_read, .check_status = ata_check_status, @@ -499,7 +497,6 @@ static const struct ata_port_operations mv5_ops = { .irq_clear = mv_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, .error_handler = mv_error_handler, .post_internal_cmd = mv_post_int_cmd, @@ -514,8 +511,6 @@ static const struct ata_port_operations mv5_ops = { }; static const struct ata_port_operations mv6_ops = { - .port_disable = ata_port_disable, - .tf_load = ata_tf_load, .tf_read = ata_tf_read, .check_status = ata_check_status, @@ -530,7 +525,6 @@ static const struct ata_port_operations mv6_ops = { .irq_clear = mv_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, .error_handler = mv_error_handler, .post_internal_cmd = mv_post_int_cmd, @@ -545,8 +539,6 @@ static const struct ata_port_operations mv6_ops = { }; static const struct ata_port_operations mv_iie_ops = { - .port_disable = ata_port_disable, - .tf_load = ata_tf_load, .tf_read = ata_tf_read, .check_status = ata_check_status, @@ -561,7 +553,6 @@ static const struct ata_port_operations mv_iie_ops = { .irq_clear = mv_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, .error_handler = mv_error_handler, .post_internal_cmd = mv_post_int_cmd, @@ -1415,7 +1406,7 @@ static void mv_err_intr(struct ata_port *ap, struct ata_queued_cmd *qc) struct mv_host_priv *hpriv = ap->host->private_data; unsigned int edma_enabled = (pp->pp_flags & MV_PP_FLAG_EDMA_EN); unsigned int action = 0, err_mask = 0; - struct ata_eh_info *ehi = &ap->eh_info; + struct ata_eh_info *ehi = &ap->link.eh_info; ata_ehi_clear_desc(ehi); @@ -1423,8 +1414,8 @@ static void mv_err_intr(struct ata_port *ap, struct ata_queued_cmd *qc) /* just a guess: do we need to do this? should we * expand this, and do it in all cases? */ - sata_scr_read(ap, SCR_ERROR, &serr); - sata_scr_write_flush(ap, SCR_ERROR, serr); + sata_scr_read(&ap->link, SCR_ERROR, &serr); + sata_scr_write_flush(&ap->link, SCR_ERROR, serr); } edma_err_cause = readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); @@ -1468,8 +1459,8 @@ static void mv_err_intr(struct ata_port *ap, struct ata_queued_cmd *qc) } if (edma_err_cause & EDMA_ERR_SERR) { - sata_scr_read(ap, SCR_ERROR, &serr); - sata_scr_write_flush(ap, SCR_ERROR, serr); + sata_scr_read(&ap->link, SCR_ERROR, &serr); + sata_scr_write_flush(&ap->link, SCR_ERROR, serr); err_mask = AC_ERR_ATA_BUS; action |= ATA_EH_HARDRESET; } @@ -1508,7 +1499,7 @@ static void mv_intr_pio(struct ata_port *ap) return; /* get active ATA command */ - qc = ata_qc_from_tag(ap, ap->active_tag); + qc = ata_qc_from_tag(ap, ap->link.active_tag); if (unlikely(!qc)) /* no active tag */ return; if (qc->tf.flags & ATA_TFLAG_POLLING) /* polling; we don't own qc */ @@ -1543,7 +1534,7 @@ static void mv_intr_edma(struct ata_port *ap) /* 50xx: get active ATA command */ if (IS_GEN_I(hpriv)) - tag = ap->active_tag; + tag = ap->link.active_tag; /* Gen II/IIE: get active ATA command via tag, to enable * support for queueing. this works transparently for @@ -1646,7 +1637,7 @@ static void mv_host_intr(struct ata_host *host, u32 relevant, unsigned int hc) if (unlikely(have_err_bits)) { struct ata_queued_cmd *qc; - qc = ata_qc_from_tag(ap, ap->active_tag); + qc = ata_qc_from_tag(ap, ap->link.active_tag); if (qc && (qc->tf.flags & ATA_TFLAG_POLLING)) continue; @@ -1687,15 +1678,15 @@ static void mv_pci_error(struct ata_host *host, void __iomem *mmio) for (i = 0; i < host->n_ports; i++) { ap = host->ports[i]; - if (!ata_port_offline(ap)) { - ehi = &ap->eh_info; + if (!ata_link_offline(&ap->link)) { + ehi = &ap->link.eh_info; ata_ehi_clear_desc(ehi); if (!printed++) ata_ehi_push_desc(ehi, "PCI err cause 0x%08x", err_cause); err_mask = AC_ERR_HOST_BUS; ehi->action = ATA_EH_HARDRESET; - qc = ata_qc_from_tag(ap, ap->active_tag); + qc = ata_qc_from_tag(ap, ap->link.active_tag); if (qc) qc->err_mask |= err_mask; else @@ -2198,14 +2189,14 @@ static void mv_phy_reset(struct ata_port *ap, unsigned int *class, /* Issue COMRESET via SControl */ comreset_retry: - sata_scr_write_flush(ap, SCR_CONTROL, 0x301); + sata_scr_write_flush(&ap->link, SCR_CONTROL, 0x301); msleep(1); - sata_scr_write_flush(ap, SCR_CONTROL, 0x300); + sata_scr_write_flush(&ap->link, SCR_CONTROL, 0x300); msleep(20); do { - sata_scr_read(ap, SCR_STATUS, &sstatus); + sata_scr_read(&ap->link, SCR_STATUS, &sstatus); if (((sstatus & 0x3) == 3) || ((sstatus & 0x3) == 0)) break; @@ -2230,7 +2221,7 @@ comreset_retry: } #endif - if (ata_port_offline(ap)) { + if (ata_link_offline(&ap->link)) { *class = ATA_DEV_NONE; return; } @@ -2257,7 +2248,7 @@ comreset_retry: */ /* finally, read device signature from TF registers */ - *class = ata_dev_try_classify(ap, 0, NULL); + *class = ata_dev_try_classify(ap->link.device, 1, NULL); writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); @@ -2266,10 +2257,11 @@ comreset_retry: VPRINTK("EXIT\n"); } -static int mv_prereset(struct ata_port *ap, unsigned long deadline) +static int mv_prereset(struct ata_link *link, unsigned long deadline) { + struct ata_port *ap = link->ap; struct mv_port_priv *pp = ap->private_data; - struct ata_eh_context *ehc = &ap->eh_context; + struct ata_eh_context *ehc = &link->eh_context; int rc; rc = mv_stop_dma(ap); @@ -2285,7 +2277,7 @@ static int mv_prereset(struct ata_port *ap, unsigned long deadline) if (ehc->i.action & ATA_EH_HARDRESET) return 0; - if (ata_port_online(ap)) + if (ata_link_online(link)) rc = ata_wait_ready(ap, deadline); else rc = -ENODEV; @@ -2293,9 +2285,10 @@ static int mv_prereset(struct ata_port *ap, unsigned long deadline) return rc; } -static int mv_hardreset(struct ata_port *ap, unsigned int *class, +static int mv_hardreset(struct ata_link *link, unsigned int *class, unsigned long deadline) { + struct ata_port *ap = link->ap; struct mv_host_priv *hpriv = ap->host->private_data; void __iomem *mmio = ap->host->iomap[MV_PRIMARY_BAR]; @@ -2308,16 +2301,17 @@ static int mv_hardreset(struct ata_port *ap, unsigned int *class, return 0; } -static void mv_postreset(struct ata_port *ap, unsigned int *classes) +static void mv_postreset(struct ata_link *link, unsigned int *classes) { + struct ata_port *ap = link->ap; u32 serr; /* print link status */ - sata_print_link_status(ap); + sata_print_link_status(link); /* clear SError */ - sata_scr_read(ap, SCR_ERROR, &serr); - sata_scr_write_flush(ap, SCR_ERROR, serr); + sata_scr_read(link, SCR_ERROR, &serr); + sata_scr_write_flush(link, SCR_ERROR, serr); /* bail out if no device is present */ if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) { @@ -2590,8 +2584,14 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx) } for (port = 0; port < host->n_ports; port++) { + struct ata_port *ap = host->ports[port]; void __iomem *port_mmio = mv_port_base(mmio, port); - mv_port_init(&host->ports[port]->ioaddr, port_mmio); + unsigned int offset = port_mmio - mmio; + + mv_port_init(&ap->ioaddr, port_mmio); + + ata_port_pbar_desc(ap, MV_PRIMARY_BAR, -1, "mmio"); + ata_port_pbar_desc(ap, MV_PRIMARY_BAR, offset, "port"); } for (hc = 0; hc < n_hc; hc++) { diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c index 40dc731..40557fe2 100644 --- a/drivers/ata/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -340,7 +340,6 @@ static struct scsi_host_template nv_adma_sht = { }; static const struct ata_port_operations nv_generic_ops = { - .port_disable = ata_port_disable, .tf_load = ata_tf_load, .tf_read = ata_tf_read, .exec_command = ata_exec_command, @@ -359,14 +358,12 @@ static const struct ata_port_operations nv_generic_ops = { .data_xfer = ata_data_xfer, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, .scr_read = nv_scr_read, .scr_write = nv_scr_write, .port_start = ata_port_start, }; static const struct ata_port_operations nv_nf2_ops = { - .port_disable = ata_port_disable, .tf_load = ata_tf_load, .tf_read = ata_tf_read, .exec_command = ata_exec_command, @@ -385,14 +382,12 @@ static const struct ata_port_operations nv_nf2_ops = { .data_xfer = ata_data_xfer, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, .scr_read = nv_scr_read, .scr_write = nv_scr_write, .port_start = ata_port_start, }; static const struct ata_port_operations nv_ck804_ops = { - .port_disable = ata_port_disable, .tf_load = ata_tf_load, .tf_read = ata_tf_read, .exec_command = ata_exec_command, @@ -411,7 +406,6 @@ static const struct ata_port_operations nv_ck804_ops = { .data_xfer = ata_data_xfer, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, .scr_read = nv_scr_read, .scr_write = nv_scr_write, .port_start = ata_port_start, @@ -419,7 +413,6 @@ static const struct ata_port_operations nv_ck804_ops = { }; static const struct ata_port_operations nv_adma_ops = { - .port_disable = ata_port_disable, .tf_load = ata_tf_load, .tf_read = nv_adma_tf_read, .check_atapi_dma = nv_adma_check_atapi_dma, @@ -430,6 +423,7 @@ static const struct ata_port_operations nv_adma_ops = { .bmdma_start = ata_bmdma_start, .bmdma_stop = ata_bmdma_stop, .bmdma_status = ata_bmdma_status, + .qc_defer = ata_std_qc_defer, .qc_prep = nv_adma_qc_prep, .qc_issue = nv_adma_qc_issue, .freeze = nv_adma_freeze, @@ -439,7 +433,6 @@ static const struct ata_port_operations nv_adma_ops = { .data_xfer = ata_data_xfer, .irq_clear = nv_adma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, .scr_read = nv_scr_read, .scr_write = nv_scr_write, .port_start = nv_adma_port_start, @@ -455,8 +448,8 @@ static const struct ata_port_info nv_port_info[] = { /* generic */ { .sht = &nv_sht, - .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_HRST_TO_RESUME, + .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, + .link_flags = ATA_LFLAG_HRST_TO_RESUME, .pio_mask = NV_PIO_MASK, .mwdma_mask = NV_MWDMA_MASK, .udma_mask = NV_UDMA_MASK, @@ -466,8 +459,8 @@ static const struct ata_port_info nv_port_info[] = { /* nforce2/3 */ { .sht = &nv_sht, - .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_HRST_TO_RESUME, + .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, + .link_flags = ATA_LFLAG_HRST_TO_RESUME, .pio_mask = NV_PIO_MASK, .mwdma_mask = NV_MWDMA_MASK, .udma_mask = NV_UDMA_MASK, @@ -477,8 +470,8 @@ static const struct ata_port_info nv_port_info[] = { /* ck804 */ { .sht = &nv_sht, - .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_HRST_TO_RESUME, + .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, + .link_flags = ATA_LFLAG_HRST_TO_RESUME, .pio_mask = NV_PIO_MASK, .mwdma_mask = NV_MWDMA_MASK, .udma_mask = NV_UDMA_MASK, @@ -489,8 +482,8 @@ static const struct ata_port_info nv_port_info[] = { { .sht = &nv_adma_sht, .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_HRST_TO_RESUME | ATA_FLAG_MMIO | ATA_FLAG_NCQ, + .link_flags = ATA_LFLAG_HRST_TO_RESUME, .pio_mask = NV_PIO_MASK, .mwdma_mask = NV_MWDMA_MASK, .udma_mask = NV_UDMA_MASK, @@ -594,7 +587,7 @@ static int nv_adma_slave_config(struct scsi_device *sdev) /* Not a proper libata device, ignore */ return rc; - if (ap->device[sdev->id].class == ATA_DEV_ATAPI) { + if (ap->link.device[sdev->id].class == ATA_DEV_ATAPI) { /* * NVIDIA reports that ADMA mode does not support ATAPI commands. * Therefore ATAPI commands are sent through the legacy interface. @@ -711,7 +704,7 @@ static int nv_adma_check_cpb(struct ata_port *ap, int cpb_num, int force_err) flags & (NV_CPB_RESP_ATA_ERR | NV_CPB_RESP_CMD_ERR | NV_CPB_RESP_CPB_ERR)))) { - struct ata_eh_info *ehi = &ap->eh_info; + struct ata_eh_info *ehi = &ap->link.eh_info; int freeze = 0; ata_ehi_clear_desc(ehi); @@ -747,7 +740,7 @@ static int nv_adma_check_cpb(struct ata_port *ap, int cpb_num, int force_err) DPRINTK("Completing qc from tag %d\n",cpb_num); ata_qc_complete(qc); } else { - struct ata_eh_info *ehi = &ap->eh_info; + struct ata_eh_info *ehi = &ap->link.eh_info; /* Notifier bits set without a command may indicate the drive is misbehaving. Raise host state machine violation on this condition. */ @@ -764,7 +757,7 @@ static int nv_adma_check_cpb(struct ata_port *ap, int cpb_num, int force_err) static int nv_host_intr(struct ata_port *ap, u8 irq_stat) { - struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag); + struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->link.active_tag); /* freeze if hotplugged */ if (unlikely(irq_stat & (NV_INT_ADDED | NV_INT_REMOVED))) { @@ -817,7 +810,7 @@ static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance) if (pp->flags & NV_ADMA_PORT_REGISTER_MODE) { u8 irq_stat = readb(host->iomap[NV_MMIO_BAR] + NV_INT_STATUS_CK804) >> (NV_INT_PORT_SHIFT * i); - if(ata_tag_valid(ap->active_tag)) + if(ata_tag_valid(ap->link.active_tag)) /** NV_INT_DEV indication seems unreliable at times at least in ADMA mode. Force it on always when a command is active, to prevent losing interrupts. */ @@ -852,7 +845,7 @@ static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance) NV_ADMA_STAT_HOTUNPLUG | NV_ADMA_STAT_TIMEOUT | NV_ADMA_STAT_SERROR))) { - struct ata_eh_info *ehi = &ap->eh_info; + struct ata_eh_info *ehi = &ap->link.eh_info; ata_ehi_clear_desc(ehi); __ata_ehi_push_desc(ehi, "ADMA status 0x%08x: ", status ); @@ -879,10 +872,10 @@ static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance) u32 check_commands; int pos, error = 0; - if(ata_tag_valid(ap->active_tag)) - check_commands = 1 << ap->active_tag; + if(ata_tag_valid(ap->link.active_tag)) + check_commands = 1 << ap->link.active_tag; else - check_commands = ap->sactive; + check_commands = ap->link.sactive; /** Check CPBs for completed commands */ while ((pos = ffs(check_commands)) && !error) { @@ -1333,7 +1326,7 @@ static irqreturn_t nv_generic_interrupt(int irq, void *dev_instance) !(ap->flags & ATA_FLAG_DISABLED)) { struct ata_queued_cmd *qc; - qc = ata_qc_from_tag(ap, ap->active_tag); + qc = ata_qc_from_tag(ap, ap->link.active_tag); if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) handled += ata_host_intr(ap, qc); else @@ -1459,7 +1452,7 @@ static void nv_ck804_thaw(struct ata_port *ap) writeb(mask, mmio_base + NV_INT_ENABLE_CK804); } -static int nv_hardreset(struct ata_port *ap, unsigned int *class, +static int nv_hardreset(struct ata_link *link, unsigned int *class, unsigned long deadline) { unsigned int dummy; @@ -1468,7 +1461,7 @@ static int nv_hardreset(struct ata_port *ap, unsigned int *class, * some controllers. Don't classify on hardreset. For more * info, see http://bugme.osdl.org/show_bug.cgi?id=3352 */ - return sata_std_hardreset(ap, &dummy, deadline); + return sata_std_hardreset(link, &dummy, deadline); } static void nv_error_handler(struct ata_port *ap) @@ -1485,7 +1478,7 @@ static void nv_adma_error_handler(struct ata_port *ap) int i; u16 tmp; - if(ata_tag_valid(ap->active_tag) || ap->sactive) { + if(ata_tag_valid(ap->link.active_tag) || ap->link.sactive) { u32 notifier = readl(mmio + NV_ADMA_NOTIFIER); u32 notifier_error = readl(mmio + NV_ADMA_NOTIFIER_ERROR); u32 gen_ctl = readl(pp->gen_block + NV_ADMA_GEN_CTL); @@ -1501,8 +1494,8 @@ static void nv_adma_error_handler(struct ata_port *ap) for( i=0;i<NV_ADMA_MAX_CPBS;i++) { struct nv_adma_cpb *cpb = &pp->cpb[i]; - if( (ata_tag_valid(ap->active_tag) && i == ap->active_tag) || - ap->sactive & (1 << i) ) + if( (ata_tag_valid(ap->link.active_tag) && i == ap->link.active_tag) || + ap->link.sactive & (1 << i) ) ata_port_printk(ap, KERN_ERR, "CPB %d: ctl_flags 0x%x, resp_flags 0x%x\n", i, cpb->ctl_flags, cpb->resp_flags); diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c index 25698cf..9032131 100644 --- a/drivers/ata/sata_promise.c +++ b/drivers/ata/sata_promise.c @@ -167,7 +167,6 @@ static struct scsi_host_template pdc_ata_sht = { }; static const struct ata_port_operations pdc_sata_ops = { - .port_disable = ata_port_disable, .tf_load = pdc_tf_load_mmio, .tf_read = ata_tf_read, .check_status = ata_check_status, @@ -185,7 +184,6 @@ static const struct ata_port_operations pdc_sata_ops = { .data_xfer = ata_data_xfer, .irq_clear = pdc_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, .scr_read = pdc_sata_scr_read, .scr_write = pdc_sata_scr_write, @@ -194,7 +192,6 @@ static const struct ata_port_operations pdc_sata_ops = { /* First-generation chips need a more restrictive ->check_atapi_dma op */ static const struct ata_port_operations pdc_old_sata_ops = { - .port_disable = ata_port_disable, .tf_load = pdc_tf_load_mmio, .tf_read = ata_tf_read, .check_status = ata_check_status, @@ -212,7 +209,6 @@ static const struct ata_port_operations pdc_old_sata_ops = { .data_xfer = ata_data_xfer, .irq_clear = pdc_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, .scr_read = pdc_sata_scr_read, .scr_write = pdc_sata_scr_write, @@ -220,7 +216,6 @@ static const struct ata_port_operations pdc_old_sata_ops = { }; static const struct ata_port_operations pdc_pata_ops = { - .port_disable = ata_port_disable, .tf_load = pdc_tf_load_mmio, .tf_read = ata_tf_read, .check_status = ata_check_status, @@ -238,7 +233,6 @@ static const struct ata_port_operations pdc_pata_ops = { .data_xfer = ata_data_xfer, .irq_clear = pdc_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, .port_start = pdc_common_port_start, }; @@ -475,7 +469,7 @@ static void pdc_atapi_pkt(struct ata_queued_cmd *qc) buf32[2] = 0; /* no next-packet */ /* select drive */ - if (sata_scr_valid(ap)) { + if (sata_scr_valid(&ap->link)) { dev_sel = PDC_DEVICE_SATA; } else { dev_sel = ATA_DEVICE_OBS; @@ -626,7 +620,7 @@ static void pdc_post_internal_cmd(struct ata_queued_cmd *qc) static void pdc_error_intr(struct ata_port *ap, struct ata_queued_cmd *qc, u32 port_status, u32 err_mask) { - struct ata_eh_info *ehi = &ap->eh_info; + struct ata_eh_info *ehi = &ap->link.eh_info; unsigned int ac_err_mask = 0; ata_ehi_clear_desc(ehi); @@ -643,7 +637,7 @@ static void pdc_error_intr(struct ata_port *ap, struct ata_queued_cmd *qc, | PDC_PCI_SYS_ERR | PDC1_PCI_PARITY_ERR)) ac_err_mask |= AC_ERR_HOST_BUS; - if (sata_scr_valid(ap)) { + if (sata_scr_valid(&ap->link)) { u32 serror; pdc_sata_scr_read(ap, SCR_ERROR, &serror); @@ -773,7 +767,7 @@ static irqreturn_t pdc_interrupt (int irq, void *dev_instance) tmp = hotplug_status & (0x11 << ata_no); if (tmp && ap && !(ap->flags & ATA_FLAG_DISABLED)) { - struct ata_eh_info *ehi = &ap->eh_info; + struct ata_eh_info *ehi = &ap->link.eh_info; ata_ehi_clear_desc(ehi); ata_ehi_hotplugged(ehi); ata_ehi_push_desc(ehi, "hotplug_status %#x", tmp); @@ -788,7 +782,7 @@ static irqreturn_t pdc_interrupt (int irq, void *dev_instance) !(ap->flags & ATA_FLAG_DISABLED)) { struct ata_queued_cmd *qc; - qc = ata_qc_from_tag(ap, ap->active_tag); + qc = ata_qc_from_tag(ap, ap->link.active_tag); if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) handled += pdc_host_intr(ap, qc); } @@ -1009,10 +1003,15 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e is_sataii_tx4 = pdc_is_sataii_tx4(pi->flags); for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; unsigned int ata_no = pdc_port_no_to_ata_no(i, is_sataii_tx4); - pdc_ata_setup_port(host->ports[i], - base + 0x200 + ata_no * 0x80, - base + 0x400 + ata_no * 0x100); + unsigned int port_offset = 0x200 + ata_no * 0x80; + unsigned int scr_offset = 0x400 + ata_no * 0x100; + + pdc_ata_setup_port(ap, base + port_offset, base + scr_offset); + + ata_port_pbar_desc(ap, PDC_MMIO_BAR, -1, "mmio"); + ata_port_pbar_desc(ap, PDC_MMIO_BAR, port_offset, "port"); } /* initialize adapter */ diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c index 5e1dfdd..c4c4cd2 100644 --- a/drivers/ata/sata_qstor.c +++ b/drivers/ata/sata_qstor.c @@ -145,7 +145,6 @@ static struct scsi_host_template qs_ata_sht = { }; static const struct ata_port_operations qs_ata_ops = { - .port_disable = ata_port_disable, .tf_load = ata_tf_load, .tf_read = ata_tf_read, .check_status = ata_check_status, @@ -159,7 +158,6 @@ static const struct ata_port_operations qs_ata_ops = { .eng_timeout = qs_eng_timeout, .irq_clear = qs_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, .scr_read = qs_scr_read, .scr_write = qs_scr_write, .port_start = qs_port_start, @@ -404,7 +402,7 @@ static inline unsigned int qs_intr_pkt(struct ata_host *host) struct qs_port_priv *pp = ap->private_data; if (!pp || pp->state != qs_state_pkt) continue; - qc = ata_qc_from_tag(ap, ap->active_tag); + qc = ata_qc_from_tag(ap, ap->link.active_tag); if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) { switch (sHST) { case 0: /* successful CPB */ @@ -437,7 +435,7 @@ static inline unsigned int qs_intr_mmio(struct ata_host *host) struct qs_port_priv *pp = ap->private_data; if (!pp || pp->state != qs_state_mmio) continue; - qc = ata_qc_from_tag(ap, ap->active_tag); + qc = ata_qc_from_tag(ap, ap->link.active_tag); if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) { /* check main status, clearing INTRQ */ @@ -637,9 +635,14 @@ static int qs_ata_init_one(struct pci_dev *pdev, return rc; for (port_no = 0; port_no < host->n_ports; ++port_no) { - void __iomem *chan = - host->iomap[QS_MMIO_BAR] + (port_no * 0x4000); - qs_ata_setup_port(&host->ports[port_no]->ioaddr, chan); + struct ata_port *ap = host->ports[port_no]; + unsigned int offset = port_no * 0x4000; + void __iomem *chan = host->iomap[QS_MMIO_BAR] + offset; + + qs_ata_setup_port(&ap->ioaddr, chan); + + ata_port_pbar_desc(ap, QS_MMIO_BAR, -1, "mmio"); + ata_port_pbar_desc(ap, QS_MMIO_BAR, offset, "port"); } /* initialize adapter */ diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c index 8c72e71..ea3a0ab 100644 --- a/drivers/ata/sata_sil.c +++ b/drivers/ata/sata_sil.c @@ -59,7 +59,8 @@ enum { SIL_FLAG_MOD15WRITE = (1 << 30), SIL_DFL_PORT_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_MMIO | ATA_FLAG_HRST_TO_RESUME, + ATA_FLAG_MMIO, + SIL_DFL_LINK_FLAGS = ATA_LFLAG_HRST_TO_RESUME, /* * Controller IDs @@ -117,7 +118,7 @@ static int sil_pci_device_resume(struct pci_dev *pdev); static void sil_dev_config(struct ata_device *dev); static int sil_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val); static int sil_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val); -static int sil_set_mode (struct ata_port *ap, struct ata_device **r_failed); +static int sil_set_mode(struct ata_link *link, struct ata_device **r_failed); static void sil_freeze(struct ata_port *ap); static void sil_thaw(struct ata_port *ap); @@ -185,7 +186,6 @@ static struct scsi_host_template sil_sht = { }; static const struct ata_port_operations sil_ops = { - .port_disable = ata_port_disable, .dev_config = sil_dev_config, .tf_load = ata_tf_load, .tf_read = ata_tf_read, @@ -206,7 +206,6 @@ static const struct ata_port_operations sil_ops = { .post_internal_cmd = ata_bmdma_post_internal_cmd, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, .scr_read = sil_scr_read, .scr_write = sil_scr_write, .port_start = ata_port_start, @@ -216,6 +215,7 @@ static const struct ata_port_info sil_port_info[] = { /* sil_3112 */ { .flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_MOD15WRITE, + .link_flags = SIL_DFL_LINK_FLAGS, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = ATA_UDMA5, @@ -225,6 +225,7 @@ static const struct ata_port_info sil_port_info[] = { { .flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_MOD15WRITE | SIL_FLAG_NO_SATA_IRQ, + .link_flags = SIL_DFL_LINK_FLAGS, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = ATA_UDMA5, @@ -233,6 +234,7 @@ static const struct ata_port_info sil_port_info[] = { /* sil_3512 */ { .flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT, + .link_flags = SIL_DFL_LINK_FLAGS, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = ATA_UDMA5, @@ -241,6 +243,7 @@ static const struct ata_port_info sil_port_info[] = { /* sil_3114 */ { .flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT, + .link_flags = SIL_DFL_LINK_FLAGS, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = ATA_UDMA5, @@ -290,35 +293,33 @@ static unsigned char sil_get_device_cache_line(struct pci_dev *pdev) /** * sil_set_mode - wrap set_mode functions - * @ap: port to set up + * @link: link to set up * @r_failed: returned device when we fail * * Wrap the libata method for device setup as after the setup we need * to inspect the results and do some configuration work */ -static int sil_set_mode (struct ata_port *ap, struct ata_device **r_failed) +static int sil_set_mode(struct ata_link *link, struct ata_device **r_failed) { - struct ata_host *host = ap->host; - struct ata_device *dev; - void __iomem *mmio_base = host->iomap[SIL_MMIO_BAR]; + struct ata_port *ap = link->ap; + void __iomem *mmio_base = ap->host->iomap[SIL_MMIO_BAR]; void __iomem *addr = mmio_base + sil_port[ap->port_no].xfer_mode; - u32 tmp, dev_mode[2]; - unsigned int i; + struct ata_device *dev; + u32 tmp, dev_mode[2] = { }; int rc; - rc = ata_do_set_mode(ap, r_failed); + rc = ata_do_set_mode(link, r_failed); if (rc) return rc; - for (i = 0; i < 2; i++) { - dev = &ap->device[i]; + ata_link_for_each_dev(dev, link) { if (!ata_dev_enabled(dev)) - dev_mode[i] = 0; /* PIO0/1/2 */ + dev_mode[dev->devno] = 0; /* PIO0/1/2 */ else if (dev->flags & ATA_DFLAG_PIO) - dev_mode[i] = 1; /* PIO3/4 */ + dev_mode[dev->devno] = 1; /* PIO3/4 */ else - dev_mode[i] = 3; /* UDMA */ + dev_mode[dev->devno] = 3; /* UDMA */ /* value 2 indicates MDMA */ } @@ -374,8 +375,8 @@ static int sil_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val) static void sil_host_intr(struct ata_port *ap, u32 bmdma2) { - struct ata_eh_info *ehi = &ap->eh_info; - struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag); + struct ata_eh_info *ehi = &ap->link.eh_info; + struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->link.active_tag); u8 status; if (unlikely(bmdma2 & SIL_DMA_SATA_IRQ)) { @@ -394,8 +395,8 @@ static void sil_host_intr(struct ata_port *ap, u32 bmdma2) * repeat probing needlessly. */ if (!(ap->pflags & ATA_PFLAG_FROZEN)) { - ata_ehi_hotplugged(&ap->eh_info); - ap->eh_info.serror |= serror; + ata_ehi_hotplugged(&ap->link.eh_info); + ap->link.eh_info.serror |= serror; } goto freeze; @@ -562,8 +563,8 @@ static void sil_thaw(struct ata_port *ap) */ static void sil_dev_config(struct ata_device *dev) { - struct ata_port *ap = dev->ap; - int print_info = ap->eh_context.i.flags & ATA_EHI_PRINTINFO; + struct ata_port *ap = dev->link->ap; + int print_info = ap->link.eh_context.i.flags & ATA_EHI_PRINTINFO; unsigned int n, quirks = 0; unsigned char model_num[ATA_ID_PROD_LEN + 1]; @@ -686,7 +687,8 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) mmio_base = host->iomap[SIL_MMIO_BAR]; for (i = 0; i < host->n_ports; i++) { - struct ata_ioports *ioaddr = &host->ports[i]->ioaddr; + struct ata_port *ap = host->ports[i]; + struct ata_ioports *ioaddr = &ap->ioaddr; ioaddr->cmd_addr = mmio_base + sil_port[i].tf; ioaddr->altstatus_addr = @@ -694,6 +696,9 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) ioaddr->bmdma_addr = mmio_base + sil_port[i].bmdma; ioaddr->scr_addr = mmio_base + sil_port[i].scr; ata_std_ports(ioaddr); + + ata_port_pbar_desc(ap, SIL_MMIO_BAR, -1, "mmio"); + ata_port_pbar_desc(ap, SIL_MMIO_BAR, sil_port[i].tf, "tf"); } /* initialize and activate */ diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c index 233e886..b061927 100644 --- a/drivers/ata/sata_sil24.c +++ b/drivers/ata/sata_sil24.c @@ -30,7 +30,7 @@ #include <linux/libata.h> #define DRV_NAME "sata_sil24" -#define DRV_VERSION "1.0" +#define DRV_VERSION "1.1" /* * Port request block (PRB) 32 bytes @@ -168,7 +168,7 @@ enum { DEF_PORT_IRQ = PORT_IRQ_COMPLETE | PORT_IRQ_ERROR | PORT_IRQ_PHYRDY_CHG | PORT_IRQ_DEV_XCHG | - PORT_IRQ_UNK_FIS, + PORT_IRQ_UNK_FIS | PORT_IRQ_SDB_NOTIFY, /* bits[27:16] are unmasked (raw) */ PORT_IRQ_RAW_SHIFT = 16, @@ -237,8 +237,9 @@ enum { /* host flags */ SIL24_COMMON_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | - ATA_FLAG_NCQ | ATA_FLAG_SKIP_D2H_BSY | - ATA_FLAG_ACPI_SATA, + ATA_FLAG_NCQ | ATA_FLAG_ACPI_SATA | + ATA_FLAG_AN | ATA_FLAG_PMP, + SIL24_COMMON_LFLAGS = ATA_LFLAG_SKIP_D2H_BSY, SIL24_FLAG_PCIX_IRQ_WOC = (1 << 24), /* IRQ loss errata on PCI-X */ IRQ_STAT_4PORTS = 0xf, @@ -322,6 +323,7 @@ struct sil24_port_priv { union sil24_cmd_block *cmd_block; /* 32 cmd blocks */ dma_addr_t cmd_block_dma; /* DMA base addr for them */ struct ata_taskfile tf; /* Cached taskfile registers */ + int do_port_rst; }; static void sil24_dev_config(struct ata_device *dev); @@ -329,9 +331,12 @@ static u8 sil24_check_status(struct ata_port *ap); static int sil24_scr_read(struct ata_port *ap, unsigned sc_reg, u32 *val); static int sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val); static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf); +static int sil24_qc_defer(struct ata_queued_cmd *qc); static void sil24_qc_prep(struct ata_queued_cmd *qc); static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc); static void sil24_irq_clear(struct ata_port *ap); +static void sil24_pmp_attach(struct ata_port *ap); +static void sil24_pmp_detach(struct ata_port *ap); static void sil24_freeze(struct ata_port *ap); static void sil24_thaw(struct ata_port *ap); static void sil24_error_handler(struct ata_port *ap); @@ -340,6 +345,7 @@ static int sil24_port_start(struct ata_port *ap); static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); #ifdef CONFIG_PM static int sil24_pci_device_resume(struct pci_dev *pdev); +static int sil24_port_resume(struct ata_port *ap); #endif static const struct pci_device_id sil24_pci_tbl[] = { @@ -384,8 +390,6 @@ static struct scsi_host_template sil24_sht = { }; static const struct ata_port_operations sil24_ops = { - .port_disable = ata_port_disable, - .dev_config = sil24_dev_config, .check_status = sil24_check_status, @@ -394,22 +398,28 @@ static const struct ata_port_operations sil24_ops = { .tf_read = sil24_tf_read, + .qc_defer = sil24_qc_defer, .qc_prep = sil24_qc_prep, .qc_issue = sil24_qc_issue, .irq_clear = sil24_irq_clear, - .irq_on = ata_dummy_irq_on, - .irq_ack = ata_dummy_irq_ack, .scr_read = sil24_scr_read, .scr_write = sil24_scr_write, + .pmp_attach = sil24_pmp_attach, + .pmp_detach = sil24_pmp_detach, + .freeze = sil24_freeze, .thaw = sil24_thaw, .error_handler = sil24_error_handler, .post_internal_cmd = sil24_post_internal_cmd, .port_start = sil24_port_start, + +#ifdef CONFIG_PM + .port_resume = sil24_port_resume, +#endif }; /* @@ -424,6 +434,7 @@ static const struct ata_port_info sil24_port_info[] = { { .flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(4) | SIL24_FLAG_PCIX_IRQ_WOC, + .link_flags = SIL24_COMMON_LFLAGS, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = ATA_UDMA5, /* udma0-5 */ @@ -432,6 +443,7 @@ static const struct ata_port_info sil24_port_info[] = { /* sil_3132 */ { .flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(2), + .link_flags = SIL24_COMMON_LFLAGS, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = ATA_UDMA5, /* udma0-5 */ @@ -440,6 +452,7 @@ static const struct ata_port_info sil24_port_info[] = { /* sil_3131/sil_3531 */ { .flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(1), + .link_flags = SIL24_COMMON_LFLAGS, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = ATA_UDMA5, /* udma0-5 */ @@ -456,7 +469,7 @@ static int sil24_tag(int tag) static void sil24_dev_config(struct ata_device *dev) { - void __iomem *port = dev->ap->ioaddr.cmd_addr; + void __iomem *port = dev->link->ap->ioaddr.cmd_addr; if (dev->cdb_len == 16) writel(PORT_CS_CDB16, port + PORT_CTRL_STAT); @@ -520,19 +533,78 @@ static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf) *tf = pp->tf; } +static void sil24_config_port(struct ata_port *ap) +{ + void __iomem *port = ap->ioaddr.cmd_addr; + + /* configure IRQ WoC */ + if (ap->flags & SIL24_FLAG_PCIX_IRQ_WOC) + writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_STAT); + else + writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR); + + /* zero error counters. */ + writel(0x8000, port + PORT_DECODE_ERR_THRESH); + writel(0x8000, port + PORT_CRC_ERR_THRESH); + writel(0x8000, port + PORT_HSHK_ERR_THRESH); + writel(0x0000, port + PORT_DECODE_ERR_CNT); + writel(0x0000, port + PORT_CRC_ERR_CNT); + writel(0x0000, port + PORT_HSHK_ERR_CNT); + + /* always use 64bit activation */ + writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_CLR); + + /* clear port multiplier enable and resume bits */ + writel(PORT_CS_PMP_EN | PORT_CS_PMP_RESUME, port + PORT_CTRL_CLR); +} + +static void sil24_config_pmp(struct ata_port *ap, int attached) +{ + void __iomem *port = ap->ioaddr.cmd_addr; + + if (attached) + writel(PORT_CS_PMP_EN, port + PORT_CTRL_STAT); + else + writel(PORT_CS_PMP_EN, port + PORT_CTRL_CLR); +} + +static void sil24_clear_pmp(struct ata_port *ap) +{ + void __iomem *port = ap->ioaddr.cmd_addr; + int i; + + writel(PORT_CS_PMP_RESUME, port + PORT_CTRL_CLR); + + for (i = 0; i < SATA_PMP_MAX_PORTS; i++) { + void __iomem *pmp_base = port + PORT_PMP + i * PORT_PMP_SIZE; + + writel(0, pmp_base + PORT_PMP_STATUS); + writel(0, pmp_base + PORT_PMP_QACTIVE); + } +} + static int sil24_init_port(struct ata_port *ap) { void __iomem *port = ap->ioaddr.cmd_addr; + struct sil24_port_priv *pp = ap->private_data; u32 tmp; + /* clear PMP error status */ + if (ap->nr_pmp_links) + sil24_clear_pmp(ap); + writel(PORT_CS_INIT, port + PORT_CTRL_STAT); ata_wait_register(port + PORT_CTRL_STAT, PORT_CS_INIT, PORT_CS_INIT, 10, 100); tmp = ata_wait_register(port + PORT_CTRL_STAT, PORT_CS_RDY, 0, 10, 100); - if ((tmp & (PORT_CS_INIT | PORT_CS_RDY)) != PORT_CS_RDY) + if ((tmp & (PORT_CS_INIT | PORT_CS_RDY)) != PORT_CS_RDY) { + pp->do_port_rst = 1; + ap->link.eh_context.i.action |= ATA_EH_HARDRESET; return -EIO; + } + return 0; } @@ -583,9 +655,10 @@ static int sil24_exec_polled_cmd(struct ata_port *ap, int pmp, return rc; } -static int sil24_do_softreset(struct ata_port *ap, unsigned int *class, +static int sil24_do_softreset(struct ata_link *link, unsigned int *class, int pmp, unsigned long deadline) { + struct ata_port *ap = link->ap; unsigned long timeout_msec = 0; struct ata_taskfile tf; const char *reason; @@ -593,7 +666,7 @@ static int sil24_do_softreset(struct ata_port *ap, unsigned int *class, DPRINTK("ENTER\n"); - if (ata_port_offline(ap)) { + if (ata_link_offline(link)) { DPRINTK("PHY reports no device\n"); *class = ATA_DEV_NONE; goto out; @@ -609,7 +682,7 @@ static int sil24_do_softreset(struct ata_port *ap, unsigned int *class, if (time_after(deadline, jiffies)) timeout_msec = jiffies_to_msecs(deadline - jiffies); - ata_tf_init(ap->device, &tf); /* doesn't really matter */ + ata_tf_init(link->device, &tf); /* doesn't really matter */ rc = sil24_exec_polled_cmd(ap, pmp, &tf, 0, PRB_CTRL_SRST, timeout_msec); if (rc == -EBUSY) { @@ -631,29 +704,54 @@ static int sil24_do_softreset(struct ata_port *ap, unsigned int *class, return 0; err: - ata_port_printk(ap, KERN_ERR, "softreset failed (%s)\n", reason); + ata_link_printk(link, KERN_ERR, "softreset failed (%s)\n", reason); return -EIO; } -static int sil24_softreset(struct ata_port *ap, unsigned int *class, +static int sil24_softreset(struct ata_link *link, unsigned int *class, unsigned long deadline) { - return sil24_do_softreset(ap, class, 0, deadline); + return sil24_do_softreset(link, class, SATA_PMP_CTRL_PORT, deadline); } -static int sil24_hardreset(struct ata_port *ap, unsigned int *class, +static int sil24_hardreset(struct ata_link *link, unsigned int *class, unsigned long deadline) { + struct ata_port *ap = link->ap; void __iomem *port = ap->ioaddr.cmd_addr; + struct sil24_port_priv *pp = ap->private_data; + int did_port_rst = 0; const char *reason; int tout_msec, rc; u32 tmp; + retry: + /* Sometimes, DEV_RST is not enough to recover the controller. + * This happens often after PM DMA CS errata. + */ + if (pp->do_port_rst) { + ata_port_printk(ap, KERN_WARNING, "controller in dubious " + "state, performing PORT_RST\n"); + + writel(PORT_CS_PORT_RST, port + PORT_CTRL_STAT); + msleep(10); + writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR); + ata_wait_register(port + PORT_CTRL_STAT, PORT_CS_RDY, 0, + 10, 5000); + + /* restore port configuration */ + sil24_config_port(ap); + sil24_config_pmp(ap, ap->nr_pmp_links); + + pp->do_port_rst = 0; + did_port_rst = 1; + } + /* sil24 does the right thing(tm) without any protection */ - sata_set_spd(ap); + sata_set_spd(link); tout_msec = 100; - if (ata_port_online(ap)) + if (ata_link_online(link)) tout_msec = 5000; writel(PORT_CS_DEV_RST, port + PORT_CTRL_STAT); @@ -663,14 +761,14 @@ static int sil24_hardreset(struct ata_port *ap, unsigned int *class, /* SStatus oscillates between zero and valid status after * DEV_RST, debounce it. */ - rc = sata_phy_debounce(ap, sata_deb_timing_long, deadline); + rc = sata_link_debounce(link, sata_deb_timing_long, deadline); if (rc) { reason = "PHY debouncing failed"; goto err; } if (tmp & PORT_CS_DEV_RST) { - if (ata_port_offline(ap)) + if (ata_link_offline(link)) return 0; reason = "link not ready"; goto err; @@ -685,7 +783,12 @@ static int sil24_hardreset(struct ata_port *ap, unsigned int *class, return -EAGAIN; err: - ata_port_printk(ap, KERN_ERR, "hardreset failed (%s)\n", reason); + if (!did_port_rst) { + pp->do_port_rst = 1; + goto retry; + } + + ata_link_printk(link, KERN_ERR, "hardreset failed (%s)\n", reason); return -EIO; } @@ -705,6 +808,38 @@ static inline void sil24_fill_sg(struct ata_queued_cmd *qc, } } +static int sil24_qc_defer(struct ata_queued_cmd *qc) +{ + struct ata_link *link = qc->dev->link; + struct ata_port *ap = link->ap; + u8 prot = qc->tf.protocol; + int is_atapi = (prot == ATA_PROT_ATAPI || + prot == ATA_PROT_ATAPI_NODATA || + prot == ATA_PROT_ATAPI_DMA); + + /* ATAPI commands completing with CHECK_SENSE cause various + * weird problems if other commands are active. PMP DMA CS + * errata doesn't cover all and HSM violation occurs even with + * only one other device active. Always run an ATAPI command + * by itself. + */ + if (unlikely(ap->excl_link)) { + if (link == ap->excl_link) { + if (ap->nr_active_links) + return ATA_DEFER_PORT; + qc->flags |= ATA_QCFLAG_CLEAR_EXCL; + } else + return ATA_DEFER_PORT; + } else if (unlikely(is_atapi)) { + ap->excl_link = link; + if (ap->nr_active_links) + return ATA_DEFER_PORT; + qc->flags |= ATA_QCFLAG_CLEAR_EXCL; + } + + return ata_std_qc_defer(qc); +} + static void sil24_qc_prep(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; @@ -748,7 +883,7 @@ static void sil24_qc_prep(struct ata_queued_cmd *qc) } prb->ctrl = cpu_to_le16(ctrl); - ata_tf_to_fis(&qc->tf, 0, 1, prb->fis); + ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, prb->fis); if (qc->flags & ATA_QCFLAG_DMAMAP) sil24_fill_sg(qc, sge); @@ -777,6 +912,39 @@ static void sil24_irq_clear(struct ata_port *ap) /* unused */ } +static void sil24_pmp_attach(struct ata_port *ap) +{ + sil24_config_pmp(ap, 1); + sil24_init_port(ap); +} + +static void sil24_pmp_detach(struct ata_port *ap) +{ + sil24_init_port(ap); + sil24_config_pmp(ap, 0); +} + +static int sil24_pmp_softreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + return sil24_do_softreset(link, class, link->pmp, deadline); +} + +static int sil24_pmp_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + int rc; + + rc = sil24_init_port(link->ap); + if (rc) { + ata_link_printk(link, KERN_ERR, + "hardreset failed (port not ready)\n"); + return rc; + } + + return sata_pmp_std_hardreset(link, class, deadline); +} + static void sil24_freeze(struct ata_port *ap) { void __iomem *port = ap->ioaddr.cmd_addr; @@ -804,8 +972,10 @@ static void sil24_error_intr(struct ata_port *ap) { void __iomem *port = ap->ioaddr.cmd_addr; struct sil24_port_priv *pp = ap->private_data; - struct ata_eh_info *ehi = &ap->eh_info; - int freeze = 0; + struct ata_queued_cmd *qc = NULL; + struct ata_link *link; + struct ata_eh_info *ehi; + int abort = 0, freeze = 0; u32 irq_stat; /* on error, we need to clear IRQ explicitly */ @@ -813,10 +983,17 @@ static void sil24_error_intr(struct ata_port *ap) writel(irq_stat, port + PORT_IRQ_STAT); /* first, analyze and record host port events */ + link = &ap->link; + ehi = &link->eh_info; ata_ehi_clear_desc(ehi); ata_ehi_push_desc(ehi, "irq_stat 0x%08x", irq_stat); + if (irq_stat & PORT_IRQ_SDB_NOTIFY) { + ata_ehi_push_desc(ehi, "SDB notify"); + sata_async_notification(ap); + } + if (irq_stat & (PORT_IRQ_PHYRDY_CHG | PORT_IRQ_DEV_XCHG)) { ata_ehi_hotplugged(ehi); ata_ehi_push_desc(ehi, "%s", @@ -836,8 +1013,44 @@ static void sil24_error_intr(struct ata_port *ap) if (irq_stat & PORT_IRQ_ERROR) { struct sil24_cerr_info *ci = NULL; unsigned int err_mask = 0, action = 0; - struct ata_queued_cmd *qc; - u32 cerr; + u32 context, cerr; + int pmp; + + abort = 1; + + /* DMA Context Switch Failure in Port Multiplier Mode + * errata. If we have active commands to 3 or more + * devices, any error condition on active devices can + * corrupt DMA context switching. + */ + if (ap->nr_active_links >= 3) { + ehi->err_mask |= AC_ERR_OTHER; + ehi->action |= ATA_EH_HARDRESET; + ata_ehi_push_desc(ehi, "PMP DMA CS errata"); + pp->do_port_rst = 1; + freeze = 1; + } + + /* find out the offending link and qc */ + if (ap->nr_pmp_links) { + context = readl(port + PORT_CONTEXT); + pmp = (context >> 5) & 0xf; + + if (pmp < ap->nr_pmp_links) { + link = &ap->pmp_link[pmp]; + ehi = &link->eh_info; + qc = ata_qc_from_tag(ap, link->active_tag); + + ata_ehi_clear_desc(ehi); + ata_ehi_push_desc(ehi, "irq_stat 0x%08x", + irq_stat); + } else { + err_mask |= AC_ERR_HSM; + action |= ATA_EH_HARDRESET; + freeze = 1; + } + } else + qc = ata_qc_from_tag(ap, link->active_tag); /* analyze CMD_ERR */ cerr = readl(port + PORT_CMD_ERR); @@ -856,7 +1069,6 @@ static void sil24_error_intr(struct ata_port *ap) } /* record error info */ - qc = ata_qc_from_tag(ap, ap->active_tag); if (qc) { sil24_read_tf(ap, qc->tag, &pp->tf); qc->err_mask |= err_mask; @@ -864,13 +1076,21 @@ static void sil24_error_intr(struct ata_port *ap) ehi->err_mask |= err_mask; ehi->action |= action; + + /* if PMP, resume */ + if (ap->nr_pmp_links) + writel(PORT_CS_PMP_RESUME, port + PORT_CTRL_STAT); } /* freeze or abort */ if (freeze) ata_port_freeze(ap); - else - ata_port_abort(ap); + else if (abort) { + if (qc) + ata_link_abort(qc->dev->link); + else + ata_port_abort(ap); + } } static void sil24_finish_qc(struct ata_queued_cmd *qc) @@ -910,7 +1130,7 @@ static inline void sil24_host_intr(struct ata_port *ap) if (rc > 0) return; if (rc < 0) { - struct ata_eh_info *ehi = &ap->eh_info; + struct ata_eh_info *ehi = &ap->link.eh_info; ehi->err_mask |= AC_ERR_HSM; ehi->action |= ATA_EH_SOFTRESET; ata_port_freeze(ap); @@ -921,7 +1141,7 @@ static inline void sil24_host_intr(struct ata_port *ap) if (!(ap->flags & SIL24_FLAG_PCIX_IRQ_WOC) && ata_ratelimit()) ata_port_printk(ap, KERN_INFO, "spurious interrupt " "(slot_stat 0x%x active_tag %d sactive 0x%x)\n", - slot_stat, ap->active_tag, ap->sactive); + slot_stat, ap->link.active_tag, ap->link.sactive); } static irqreturn_t sil24_interrupt(int irq, void *dev_instance) @@ -963,16 +1183,18 @@ static irqreturn_t sil24_interrupt(int irq, void *dev_instance) static void sil24_error_handler(struct ata_port *ap) { - struct ata_eh_context *ehc = &ap->eh_context; + struct sil24_port_priv *pp = ap->private_data; - if (sil24_init_port(ap)) { + if (sil24_init_port(ap)) ata_eh_freeze_port(ap); - ehc->i.action |= ATA_EH_HARDRESET; - } /* perform recovery */ - ata_do_eh(ap, ata_std_prereset, sil24_softreset, sil24_hardreset, - ata_std_postreset); + sata_pmp_do_eh(ap, ata_std_prereset, sil24_softreset, sil24_hardreset, + ata_std_postreset, sata_pmp_std_prereset, + sil24_pmp_softreset, sil24_pmp_hardreset, + sata_pmp_std_postreset); + + pp->do_port_rst = 0; } static void sil24_post_internal_cmd(struct ata_queued_cmd *qc) @@ -980,8 +1202,8 @@ static void sil24_post_internal_cmd(struct ata_queued_cmd *qc) struct ata_port *ap = qc->ap; /* make DMA engine forget about the failed command */ - if (qc->flags & ATA_QCFLAG_FAILED) - sil24_init_port(ap); + if ((qc->flags & ATA_QCFLAG_FAILED) && sil24_init_port(ap)) + ata_eh_freeze_port(ap); } static int sil24_port_start(struct ata_port *ap) @@ -1019,7 +1241,6 @@ static int sil24_port_start(struct ata_port *ap) static void sil24_init_controller(struct ata_host *host) { void __iomem *host_base = host->iomap[SIL24_HOST_BAR]; - void __iomem *port_base = host->iomap[SIL24_PORT_BAR]; u32 tmp; int i; @@ -1031,7 +1252,8 @@ static void sil24_init_controller(struct ata_host *host) /* init ports */ for (i = 0; i < host->n_ports; i++) { - void __iomem *port = port_base + i * PORT_REGS_SIZE; + struct ata_port *ap = host->ports[i]; + void __iomem *port = ap->ioaddr.cmd_addr; /* Initial PHY setting */ writel(0x20c, port + PORT_PHY_CFG); @@ -1048,26 +1270,8 @@ static void sil24_init_controller(struct ata_host *host) "failed to clear port RST\n"); } - /* Configure IRQ WoC */ - if (host->ports[0]->flags & SIL24_FLAG_PCIX_IRQ_WOC) - writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_STAT); - else - writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR); - - /* Zero error counters. */ - writel(0x8000, port + PORT_DECODE_ERR_THRESH); - writel(0x8000, port + PORT_CRC_ERR_THRESH); - writel(0x8000, port + PORT_HSHK_ERR_THRESH); - writel(0x0000, port + PORT_DECODE_ERR_CNT); - writel(0x0000, port + PORT_CRC_ERR_CNT); - writel(0x0000, port + PORT_HSHK_ERR_CNT); - - /* Always use 64bit activation */ - writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_CLR); - - /* Clear port multiplier enable and resume bits */ - writel(PORT_CS_PMP_EN | PORT_CS_PMP_RESUME, - port + PORT_CTRL_CLR); + /* configure port */ + sil24_config_port(ap); } /* Turn on interrupts */ @@ -1118,12 +1322,15 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) host->iomap = iomap; for (i = 0; i < host->n_ports; i++) { - void __iomem *port = iomap[SIL24_PORT_BAR] + i * PORT_REGS_SIZE; + struct ata_port *ap = host->ports[i]; + size_t offset = ap->port_no * PORT_REGS_SIZE; + void __iomem *port = iomap[SIL24_PORT_BAR] + offset; host->ports[i]->ioaddr.cmd_addr = port; host->ports[i]->ioaddr.scr_addr = port + PORT_SCONTROL; - ata_std_ports(&host->ports[i]->ioaddr); + ata_port_pbar_desc(ap, SIL24_HOST_BAR, -1, "host"); + ata_port_pbar_desc(ap, SIL24_PORT_BAR, offset, "port"); } /* configure and activate the device */ @@ -1179,6 +1386,12 @@ static int sil24_pci_device_resume(struct pci_dev *pdev) return 0; } + +static int sil24_port_resume(struct ata_port *ap) +{ + sil24_config_pmp(ap, ap->nr_pmp_links); + return 0; +} #endif static int __init sil24_init(void) diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c index 41c1d6e..8d98a9f 100644 --- a/drivers/ata/sata_sis.c +++ b/drivers/ata/sata_sis.c @@ -104,7 +104,6 @@ static struct scsi_host_template sis_sht = { }; static const struct ata_port_operations sis_ops = { - .port_disable = ata_port_disable, .tf_load = ata_tf_load, .tf_read = ata_tf_read, .check_status = ata_check_status, @@ -123,7 +122,6 @@ static const struct ata_port_operations sis_ops = { .post_internal_cmd = ata_bmdma_post_internal_cmd, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, .scr_read = sis_scr_read, .scr_write = sis_scr_write, .port_start = ata_port_start, diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c index d9678e7..12d613c 100644 --- a/drivers/ata/sata_svw.c +++ b/drivers/ata/sata_svw.c @@ -329,7 +329,6 @@ static struct scsi_host_template k2_sata_sht = { static const struct ata_port_operations k2_sata_ops = { - .port_disable = ata_port_disable, .tf_load = k2_sata_tf_load, .tf_read = k2_sata_tf_read, .check_status = k2_stat_check_status, @@ -349,7 +348,6 @@ static const struct ata_port_operations k2_sata_ops = { .post_internal_cmd = ata_bmdma_post_internal_cmd, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, .scr_read = k2_sata_scr_read, .scr_write = k2_sata_scr_write, .port_start = ata_port_start, @@ -445,9 +443,15 @@ static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *e /* different controllers have different number of ports - currently 4 or 8 */ /* All ports are on the same function. Multi-function device is no * longer available. This should not be seen in any system. */ - for (i = 0; i < host->n_ports; i++) - k2_sata_setup_port(&host->ports[i]->ioaddr, - mmio_base + i * K2_SATA_PORT_OFFSET); + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + unsigned int offset = i * K2_SATA_PORT_OFFSET; + + k2_sata_setup_port(&ap->ioaddr, mmio_base + offset); + + ata_port_pbar_desc(ap, 5, -1, "mmio"); + ata_port_pbar_desc(ap, 5, offset, "port"); + } rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); if (rc) diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c index 97aefdd..9f9f7b3 100644 --- a/drivers/ata/sata_sx4.c +++ b/drivers/ata/sata_sx4.c @@ -254,7 +254,6 @@ static struct scsi_host_template pdc_sata_sht = { }; static const struct ata_port_operations pdc_20621_ops = { - .port_disable = ata_port_disable, .tf_load = pdc_tf_load_mmio, .tf_read = ata_tf_read, .check_status = ata_check_status, @@ -267,7 +266,6 @@ static const struct ata_port_operations pdc_20621_ops = { .eng_timeout = pdc_eng_timeout, .irq_clear = pdc20621_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, .port_start = pdc_port_start, }; @@ -854,7 +852,7 @@ static irqreturn_t pdc20621_interrupt (int irq, void *dev_instance) !(ap->flags & ATA_FLAG_DISABLED)) { struct ata_queued_cmd *qc; - qc = ata_qc_from_tag(ap, ap->active_tag); + qc = ata_qc_from_tag(ap, ap->link.active_tag); if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) handled += pdc20621_host_intr(ap, qc, (i > 4), mmio_base); @@ -881,7 +879,7 @@ static void pdc_eng_timeout(struct ata_port *ap) spin_lock_irqsave(&host->lock, flags); - qc = ata_qc_from_tag(ap, ap->active_tag); + qc = ata_qc_from_tag(ap, ap->link.active_tag); switch (qc->tf.protocol) { case ATA_PROT_DMA: @@ -1383,9 +1381,8 @@ static int pdc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id * const struct ata_port_info *ppi[] = { &pdc_port_info[ent->driver_data], NULL }; struct ata_host *host; - void __iomem *base; struct pdc_host_priv *hpriv; - int rc; + int i, rc; if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); @@ -1411,11 +1408,17 @@ static int pdc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id * return rc; host->iomap = pcim_iomap_table(pdev); - base = host->iomap[PDC_MMIO_BAR] + PDC_CHIP0_OFS; - pdc_sata_setup_port(&host->ports[0]->ioaddr, base + 0x200); - pdc_sata_setup_port(&host->ports[1]->ioaddr, base + 0x280); - pdc_sata_setup_port(&host->ports[2]->ioaddr, base + 0x300); - pdc_sata_setup_port(&host->ports[3]->ioaddr, base + 0x380); + for (i = 0; i < 4; i++) { + struct ata_port *ap = host->ports[i]; + void __iomem *base = host->iomap[PDC_MMIO_BAR] + PDC_CHIP0_OFS; + unsigned int offset = 0x200 + i * 0x80; + + pdc_sata_setup_port(&ap->ioaddr, base + offset); + + ata_port_pbar_desc(ap, PDC_MMIO_BAR, -1, "mmio"); + ata_port_pbar_desc(ap, PDC_DIMM_BAR, -1, "dimm"); + ata_port_pbar_desc(ap, PDC_MMIO_BAR, offset, "port"); + } /* configure and activate */ rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); diff --git a/drivers/ata/sata_uli.c b/drivers/ata/sata_uli.c index e6b8b45..d394da0 100644 --- a/drivers/ata/sata_uli.c +++ b/drivers/ata/sata_uli.c @@ -94,8 +94,6 @@ static struct scsi_host_template uli_sht = { }; static const struct ata_port_operations uli_ops = { - .port_disable = ata_port_disable, - .tf_load = ata_tf_load, .tf_read = ata_tf_read, .check_status = ata_check_status, @@ -117,7 +115,6 @@ static const struct ata_port_operations uli_ops = { .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, .scr_read = uli_scr_read, .scr_write = uli_scr_write, @@ -242,6 +239,12 @@ static int uli_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) hpriv->scr_cfg_addr[2] = ULI5287_BASE + ULI5287_OFFS*4; ata_std_ports(ioaddr); + ata_port_desc(host->ports[2], + "cmd 0x%llx ctl 0x%llx bmdma 0x%llx", + (unsigned long long)pci_resource_start(pdev, 0) + 8, + ((unsigned long long)pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS) + 4, + (unsigned long long)pci_resource_start(pdev, 4) + 16); + ioaddr = &host->ports[3]->ioaddr; ioaddr->cmd_addr = iomap[2] + 8; ioaddr->altstatus_addr = @@ -250,6 +253,13 @@ static int uli_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) ioaddr->bmdma_addr = iomap[4] + 24; hpriv->scr_cfg_addr[3] = ULI5287_BASE + ULI5287_OFFS*5; ata_std_ports(ioaddr); + + ata_port_desc(host->ports[2], + "cmd 0x%llx ctl 0x%llx bmdma 0x%llx", + (unsigned long long)pci_resource_start(pdev, 2) + 9, + ((unsigned long long)pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS) + 4, + (unsigned long long)pci_resource_start(pdev, 4) + 24); + break; case uli_5289: diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c index 57fd30d..1dc9b4f 100644 --- a/drivers/ata/sata_via.c +++ b/drivers/ata/sata_via.c @@ -57,7 +57,6 @@ enum { SATA_CHAN_ENAB = 0x40, /* SATA channel enable */ SATA_INT_GATE = 0x41, /* SATA interrupt gating */ SATA_NATIVE_MODE = 0x42, /* Native mode enable */ - SATA_PATA_SHARING = 0x49, /* PATA/SATA sharing func ctrl */ PATA_UDMA_TIMING = 0xB3, /* PATA timing for DMA/ cable detect */ PATA_PIO_TIMING = 0xAB, /* PATA timing register */ @@ -68,7 +67,6 @@ enum { NATIVE_MODE_ALL = (1 << 7) | (1 << 6) | (1 << 5) | (1 << 4), SATA_EXT_PHY = (1 << 6), /* 0==use PATA, 1==ext phy */ - SATA_2DEV = (1 << 5), /* SATA is master/slave */ }; static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); @@ -122,8 +120,6 @@ static struct scsi_host_template svia_sht = { }; static const struct ata_port_operations vt6420_sata_ops = { - .port_disable = ata_port_disable, - .tf_load = ata_tf_load, .tf_read = ata_tf_read, .check_status = ata_check_status, @@ -146,14 +142,11 @@ static const struct ata_port_operations vt6420_sata_ops = { .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, .port_start = ata_port_start, }; static const struct ata_port_operations vt6421_pata_ops = { - .port_disable = ata_port_disable, - .set_piomode = vt6421_set_pio_mode, .set_dmamode = vt6421_set_dma_mode, @@ -180,14 +173,11 @@ static const struct ata_port_operations vt6421_pata_ops = { .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, .port_start = ata_port_start, }; static const struct ata_port_operations vt6421_sata_ops = { - .port_disable = ata_port_disable, - .tf_load = ata_tf_load, .tf_read = ata_tf_read, .check_status = ata_check_status, @@ -211,7 +201,6 @@ static const struct ata_port_operations vt6421_sata_ops = { .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, .scr_read = svia_scr_read, .scr_write = svia_scr_write, @@ -276,7 +265,7 @@ static void svia_noop_freeze(struct ata_port *ap) /** * vt6420_prereset - prereset for vt6420 - * @ap: target ATA port + * @link: target ATA link * @deadline: deadline jiffies for the operation * * SCR registers on vt6420 are pieces of shit and may hang the @@ -294,9 +283,10 @@ static void svia_noop_freeze(struct ata_port *ap) * RETURNS: * 0 on success, -errno otherwise. */ -static int vt6420_prereset(struct ata_port *ap, unsigned long deadline) +static int vt6420_prereset(struct ata_link *link, unsigned long deadline) { - struct ata_eh_context *ehc = &ap->eh_context; + struct ata_port *ap = link->ap; + struct ata_eh_context *ehc = &ap->link.eh_context; unsigned long timeout = jiffies + (HZ * 5); u32 sstatus, scontrol; int online; @@ -407,6 +397,9 @@ static void vt6421_init_addrs(struct ata_port *ap) ioaddr->scr_addr = vt6421_scr_addr(iomap[5], ap->port_no); ata_std_ports(ioaddr); + + ata_port_pbar_desc(ap, ap->port_no, -1, "port"); + ata_port_pbar_desc(ap, 4, ap->port_no * 8, "bmdma"); } static int vt6420_prepare_host(struct pci_dev *pdev, struct ata_host **r_host) @@ -513,7 +506,6 @@ static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) struct ata_host *host; int board_id = (int) ent->driver_data; const int *bar_sizes; - u8 tmp8; if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); @@ -522,19 +514,10 @@ static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) if (rc) return rc; - if (board_id == vt6420) { - pci_read_config_byte(pdev, SATA_PATA_SHARING, &tmp8); - if (tmp8 & SATA_2DEV) { - dev_printk(KERN_ERR, &pdev->dev, - "SATA master/slave not supported (0x%x)\n", - (int) tmp8); - return -EIO; - } - + if (board_id == vt6420) bar_sizes = &svia_bar_sizes[0]; - } else { + else bar_sizes = &vt6421_bar_sizes[0]; - } for (i = 0; i < ARRAY_SIZE(svia_bar_sizes); i++) if ((pci_resource_start(pdev, i) == 0) || diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c index 1920915..0d9be16 100644 --- a/drivers/ata/sata_vsc.c +++ b/drivers/ata/sata_vsc.c @@ -240,7 +240,7 @@ static void vsc_port_intr(u8 port_status, struct ata_port *ap) return; } - qc = ata_qc_from_tag(ap, ap->active_tag); + qc = ata_qc_from_tag(ap, ap->link.active_tag); if (qc && likely(!(qc->tf.flags & ATA_TFLAG_POLLING))) handled = ata_host_intr(ap, qc); @@ -317,7 +317,6 @@ static struct scsi_host_template vsc_sata_sht = { static const struct ata_port_operations vsc_sata_ops = { - .port_disable = ata_port_disable, .tf_load = vsc_sata_tf_load, .tf_read = vsc_sata_tf_read, .exec_command = ata_exec_command, @@ -336,7 +335,6 @@ static const struct ata_port_operations vsc_sata_ops = { .post_internal_cmd = ata_bmdma_post_internal_cmd, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, .scr_read = vsc_sata_scr_read, .scr_write = vsc_sata_scr_write, .port_start = ata_port_start, @@ -408,9 +406,15 @@ static int __devinit vsc_sata_init_one (struct pci_dev *pdev, const struct pci_d mmio_base = host->iomap[VSC_MMIO_BAR]; - for (i = 0; i < host->n_ports; i++) - vsc_sata_setup_port(&host->ports[i]->ioaddr, - mmio_base + (i + 1) * VSC_SATA_PORT_OFFSET); + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + unsigned int offset = (i + 1) * VSC_SATA_PORT_OFFSET; + + vsc_sata_setup_port(&ap->ioaddr, mmio_base + offset); + + ata_port_pbar_desc(ap, VSC_MMIO_BAR, -1, "mmio"); + ata_port_pbar_desc(ap, VSC_MMIO_BAR, offset, "port"); + } /* * Use 32 bit DMA mask, because 64 bit address support is poor. diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index f142eaf..b41dfb5 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -3829,18 +3829,18 @@ static int ipr_device_reset(struct ipr_ioa_cfg *ioa_cfg, /** * ipr_sata_reset - Reset the SATA port - * @ap: SATA port to reset + * @link: SATA link to reset * @classes: class of the attached device * - * This function issues a SATA phy reset to the affected ATA port. + * This function issues a SATA phy reset to the affected ATA link. * * Return value: * 0 on success / non-zero on failure **/ -static int ipr_sata_reset(struct ata_port *ap, unsigned int *classes, +static int ipr_sata_reset(struct ata_link *link, unsigned int *classes, unsigned long deadline) { - struct ipr_sata_port *sata_port = ap->private_data; + struct ipr_sata_port *sata_port = link->ap->private_data; struct ipr_ioa_cfg *ioa_cfg = sata_port->ioa_cfg; struct ipr_resource_entry *res; unsigned long lock_flags = 0; @@ -4981,22 +4981,22 @@ static void ipr_ata_phy_reset(struct ata_port *ap) rc = ipr_device_reset(ioa_cfg, res); if (rc) { - ap->ops->port_disable(ap); + ata_port_disable(ap); goto out_unlock; } switch(res->cfgte.proto) { case IPR_PROTO_SATA: case IPR_PROTO_SAS_STP: - ap->device[0].class = ATA_DEV_ATA; + ap->link.device[0].class = ATA_DEV_ATA; break; case IPR_PROTO_SATA_ATAPI: case IPR_PROTO_SAS_STP_ATAPI: - ap->device[0].class = ATA_DEV_ATAPI; + ap->link.device[0].class = ATA_DEV_ATAPI; break; default: - ap->device[0].class = ATA_DEV_UNKNOWN; - ap->ops->port_disable(ap); + ap->link.device[0].class = ATA_DEV_UNKNOWN; + ata_port_disable(ap); break; }; @@ -5262,7 +5262,6 @@ static u8 ipr_ata_check_altstatus(struct ata_port *ap) } static struct ata_port_operations ipr_sata_ops = { - .port_disable = ata_port_disable, .check_status = ipr_ata_check_status, .check_altstatus = ipr_ata_check_altstatus, .dev_select = ata_noop_dev_select, diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c index 5e573ef..0829b55 100644 --- a/drivers/scsi/libsas/sas_ata.c +++ b/drivers/scsi/libsas/sas_ata.c @@ -249,17 +249,17 @@ static void sas_ata_phy_reset(struct ata_port *ap) switch (dev->sata_dev.command_set) { case ATA_COMMAND_SET: SAS_DPRINTK("%s: Found ATA device.\n", __FUNCTION__); - ap->device[0].class = ATA_DEV_ATA; + ap->link.device[0].class = ATA_DEV_ATA; break; case ATAPI_COMMAND_SET: SAS_DPRINTK("%s: Found ATAPI device.\n", __FUNCTION__); - ap->device[0].class = ATA_DEV_ATAPI; + ap->link.device[0].class = ATA_DEV_ATAPI; break; default: SAS_DPRINTK("%s: Unknown SATA command set: %d.\n", __FUNCTION__, dev->sata_dev.command_set); - ap->device[0].class = ATA_DEV_UNKNOWN; + ap->link.device[0].class = ATA_DEV_UNKNOWN; break; } @@ -317,7 +317,7 @@ static int sas_ata_scr_write(struct ata_port *ap, unsigned int sc_reg_in, dev->sata_dev.serror = val; break; case SCR_ACTIVE: - dev->sata_dev.ap->sactive = val; + dev->sata_dev.ap->link.sactive = val; break; default: return -EINVAL; @@ -342,7 +342,7 @@ static int sas_ata_scr_read(struct ata_port *ap, unsigned int sc_reg_in, *val = dev->sata_dev.serror; return 0; case SCR_ACTIVE: - *val = dev->sata_dev.ap->sactive; + *val = dev->sata_dev.ap->link.sactive; return 0; default: return -EINVAL; @@ -350,7 +350,6 @@ static int sas_ata_scr_read(struct ata_port *ap, unsigned int sc_reg_in, } static struct ata_port_operations sas_sata_ops = { - .port_disable = ata_port_disable, .check_status = sas_ata_check_status, .check_altstatus = sas_ata_check_status, .dev_select = ata_noop_dev_select, diff --git a/include/asm-generic/libata-portmap.h b/include/asm-generic/libata-portmap.h index 62fb361..cf14f2f 100644 --- a/include/asm-generic/libata-portmap.h +++ b/include/asm-generic/libata-portmap.h @@ -1,12 +1,7 @@ #ifndef __ASM_GENERIC_LIBATA_PORTMAP_H #define __ASM_GENERIC_LIBATA_PORTMAP_H -#define ATA_PRIMARY_CMD 0x1F0 -#define ATA_PRIMARY_CTL 0x3F6 #define ATA_PRIMARY_IRQ(dev) 14 - -#define ATA_SECONDARY_CMD 0x170 -#define ATA_SECONDARY_CTL 0x376 #define ATA_SECONDARY_IRQ(dev) 15 #endif diff --git a/include/linux/ata.h b/include/linux/ata.h index c043c1c..a4f373f 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -230,6 +230,12 @@ enum { SETFEATURES_SPINUP = 0x07, /* Spin-up drive */ + SETFEATURES_SATA_ENABLE = 0x10, /* Enable use of SATA feature */ + SETFEATURES_SATA_DISABLE = 0x90, /* Disable use of SATA feature */ + + /* SETFEATURE Sector counts for SATA features */ + SATA_AN = 0x05, /* Asynchronous Notification */ + /* ATAPI stuff */ ATAPI_PKT_DMA = (1 << 0), ATAPI_DMADIR = (1 << 2), /* ATAPI data dir: @@ -281,6 +287,15 @@ enum { SERR_PROTOCOL = (1 << 10), /* protocol violation */ SERR_INTERNAL = (1 << 11), /* host internal error */ SERR_PHYRDY_CHG = (1 << 16), /* PHY RDY changed */ + SERR_PHY_INT_ERR = (1 << 17), /* PHY internal error */ + SERR_COMM_WAKE = (1 << 18), /* Comm wake */ + SERR_10B_8B_ERR = (1 << 19), /* 10b to 8b decode error */ + SERR_DISPARITY = (1 << 20), /* Disparity */ + SERR_CRC = (1 << 21), /* CRC error */ + SERR_HANDSHAKE = (1 << 22), /* Handshake error */ + SERR_LINK_SEQ_ERR = (1 << 23), /* Link sequence error */ + SERR_TRANS_ST_ERROR = (1 << 24), /* Transport state trans. error */ + SERR_UNRECOG_FIS = (1 << 25), /* Unrecognized FIS */ SERR_DEV_XCHG = (1 << 26), /* device exchanged */ /* struct ata_taskfile flags */ @@ -341,24 +356,17 @@ struct ata_taskfile { }; #define ata_id_is_ata(id) (((id)[0] & (1 << 15)) == 0) -#define ata_id_rahead_enabled(id) ((id)[85] & (1 << 6)) -#define ata_id_wcache_enabled(id) ((id)[85] & (1 << 5)) -#define ata_id_hpa_enabled(id) ((id)[85] & (1 << 10)) -#define ata_id_has_fua(id) ((id)[84] & (1 << 6)) -#define ata_id_has_flush(id) ((id)[83] & (1 << 12)) -#define ata_id_has_flush_ext(id) ((id)[83] & (1 << 13)) -#define ata_id_has_lba48(id) ((id)[83] & (1 << 10)) -#define ata_id_has_hpa(id) ((id)[82] & (1 << 10)) -#define ata_id_has_wcache(id) ((id)[82] & (1 << 5)) -#define ata_id_has_pm(id) ((id)[82] & (1 << 3)) #define ata_id_has_lba(id) ((id)[49] & (1 << 9)) #define ata_id_has_dma(id) ((id)[49] & (1 << 8)) #define ata_id_has_ncq(id) ((id)[76] & (1 << 8)) #define ata_id_queue_depth(id) (((id)[75] & 0x1f) + 1) #define ata_id_removeable(id) ((id)[0] & (1 << 7)) -#define ata_id_has_dword_io(id) ((id)[50] & (1 << 0)) +#define ata_id_has_dword_io(id) ((id)[48] & (1 << 0)) +#define ata_id_has_atapi_AN(id) \ + ( (((id)[76] != 0x0000) && ((id)[76] != 0xffff)) && \ + ((id)[78] & (1 << 5)) ) #define ata_id_iordy_disable(id) ((id)[49] & (1 << 10)) -#define ata_id_has_iordy(id) ((id)[49] & (1 << 9)) +#define ata_id_has_iordy(id) ((id)[49] & (1 << 11)) #define ata_id_u32(id,n) \ (((u32) (id)[(n) + 1] << 16) | ((u32) (id)[(n)])) #define ata_id_u64(id,n) \ @@ -369,6 +377,90 @@ struct ata_taskfile { #define ata_id_cdb_intr(id) (((id)[0] & 0x60) == 0x20) +static inline int ata_id_has_fua(const u16 *id) +{ + if ((id[84] & 0xC000) != 0x4000) + return 0; + return id[84] & (1 << 6); +} + +static inline int ata_id_has_flush(const u16 *id) +{ + if ((id[83] & 0xC000) != 0x4000) + return 0; + return id[83] & (1 << 12); +} + +static inline int ata_id_has_flush_ext(const u16 *id) +{ + if ((id[83] & 0xC000) != 0x4000) + return 0; + return id[83] & (1 << 13); +} + +static inline int ata_id_has_lba48(const u16 *id) +{ + if ((id[83] & 0xC000) != 0x4000) + return 0; + return id[83] & (1 << 10); +} + +static inline int ata_id_hpa_enabled(const u16 *id) +{ + /* Yes children, word 83 valid bits cover word 82 data */ + if ((id[83] & 0xC000) != 0x4000) + return 0; + /* And 87 covers 85-87 */ + if ((id[87] & 0xC000) != 0x4000) + return 0; + /* Check command sets enabled as well as supported */ + if ((id[85] & ( 1 << 10)) == 0) + return 0; + return id[82] & (1 << 10); +} + +static inline int ata_id_has_wcache(const u16 *id) +{ + /* Yes children, word 83 valid bits cover word 82 data */ + if ((id[83] & 0xC000) != 0x4000) + return 0; + return id[82] & (1 << 5); +} + +static inline int ata_id_has_pm(const u16 *id) +{ + if ((id[83] & 0xC000) != 0x4000) + return 0; + return id[82] & (1 << 3); +} + +static inline int ata_id_rahead_enabled(const u16 *id) +{ + if ((id[87] & 0xC000) != 0x4000) + return 0; + return id[85] & (1 << 6); +} + +static inline int ata_id_wcache_enabled(const u16 *id) +{ + if ((id[87] & 0xC000) != 0x4000) + return 0; + return id[85] & (1 << 5); +} + +/** + * ata_id_major_version - get ATA level of drive + * @id: Identify data + * + * Caveats: + * ATA-1 considers identify optional + * ATA-2 introduces mandatory identify + * ATA-3 introduces word 80 and accurate reporting + * + * The practical impact of this is that ata_id_major_version cannot + * reliably report on drives below ATA3. + */ + static inline unsigned int ata_id_major_version(const u16 *id) { unsigned int mver; diff --git a/include/linux/libata.h b/include/linux/libata.h index a67bb90..229a9ff 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -28,7 +28,6 @@ #include <linux/delay.h> #include <linux/interrupt.h> -#include <linux/pci.h> #include <linux/dma-mapping.h> #include <asm/scatterlist.h> #include <linux/io.h> @@ -107,12 +106,6 @@ static inline u32 ata_msg_init(int dval, int default_msg_enable_bits) /* defines only for the constants which don't work well as enums */ #define ATA_TAG_POISON 0xfafbfcfdU -/* move to PCI layer? */ -static inline struct device *pci_dev_to_dev(struct pci_dev *pdev) -{ - return &pdev->dev; -} - enum { /* various global constants */ LIBATA_MAX_PRD = ATA_MAX_PRD / 2, @@ -139,11 +132,12 @@ enum { ATA_DFLAG_FLUSH_EXT = (1 << 4), /* do FLUSH_EXT instead of FLUSH */ ATA_DFLAG_ACPI_PENDING = (1 << 5), /* ACPI resume action pending */ ATA_DFLAG_ACPI_FAILED = (1 << 6), /* ACPI on devcfg has failed */ - ATA_DFLAG_CFG_MASK = (1 << 8) - 1, + ATA_DFLAG_AN = (1 << 7), /* AN configured */ + ATA_DFLAG_CFG_MASK = (1 << 12) - 1, - ATA_DFLAG_PIO = (1 << 8), /* device limited to PIO mode */ - ATA_DFLAG_NCQ_OFF = (1 << 9), /* device limited to non-NCQ mode */ - ATA_DFLAG_SPUNDOWN = (1 << 10), /* XXX: for spindown_compat */ + ATA_DFLAG_PIO = (1 << 12), /* device limited to PIO mode */ + ATA_DFLAG_NCQ_OFF = (1 << 13), /* device limited to non-NCQ mode */ + ATA_DFLAG_SPUNDOWN = (1 << 14), /* XXX: for spindown_compat */ ATA_DFLAG_INIT_MASK = (1 << 16) - 1, ATA_DFLAG_DETACH = (1 << 16), @@ -154,7 +148,22 @@ enum { ATA_DEV_ATA_UNSUP = 2, /* ATA device (unsupported) */ ATA_DEV_ATAPI = 3, /* ATAPI device */ ATA_DEV_ATAPI_UNSUP = 4, /* ATAPI device (unsupported) */ - ATA_DEV_NONE = 5, /* no device */ + ATA_DEV_PMP = 5, /* SATA port multiplier */ + ATA_DEV_PMP_UNSUP = 6, /* SATA port multiplier (unsupported) */ + ATA_DEV_SEMB = 7, /* SEMB */ + ATA_DEV_SEMB_UNSUP = 8, /* SEMB (unsupported) */ + ATA_DEV_NONE = 9, /* no device */ + + /* struct ata_link flags */ + ATA_LFLAG_HRST_TO_RESUME = (1 << 0), /* hardreset to resume link */ + ATA_LFLAG_SKIP_D2H_BSY = (1 << 1), /* can't wait for the first D2H + * Register FIS clearing BSY */ + ATA_LFLAG_NO_SRST = (1 << 2), /* avoid softreset */ + ATA_LFLAG_ASSUME_ATA = (1 << 3), /* assume ATA class */ + ATA_LFLAG_ASSUME_SEMB = (1 << 4), /* assume SEMB class */ + ATA_LFLAG_ASSUME_CLASS = ATA_LFLAG_ASSUME_ATA | ATA_LFLAG_ASSUME_SEMB, + ATA_LFLAG_NO_RETRY = (1 << 5), /* don't retry this link */ + ATA_LFLAG_DISABLED = (1 << 6), /* link is disabled */ /* struct ata_port flags */ ATA_FLAG_SLAVE_POSS = (1 << 0), /* host supports slave dev */ @@ -170,13 +179,12 @@ enum { ATA_FLAG_PIO_POLLING = (1 << 9), /* use polling PIO if LLD * doesn't handle PIO interrupts */ ATA_FLAG_NCQ = (1 << 10), /* host supports NCQ */ - ATA_FLAG_HRST_TO_RESUME = (1 << 11), /* hardreset to resume phy */ - ATA_FLAG_SKIP_D2H_BSY = (1 << 12), /* can't wait for the first D2H - * Register FIS clearing BSY */ ATA_FLAG_DEBUGMSG = (1 << 13), ATA_FLAG_IGN_SIMPLEX = (1 << 15), /* ignore SIMPLEX */ ATA_FLAG_NO_IORDY = (1 << 16), /* controller lacks iordy */ ATA_FLAG_ACPI_SATA = (1 << 17), /* need native SATA ACPI layout */ + ATA_FLAG_AN = (1 << 18), /* controller supports AN */ + ATA_FLAG_PMP = (1 << 19), /* controller supports PMP */ /* The following flag belongs to ap->pflags but is kept in * ap->flags because it's referenced in many LLDs and will be @@ -195,6 +203,7 @@ enum { ATA_PFLAG_UNLOADING = (1 << 5), /* module is unloading */ ATA_PFLAG_SCSI_HOTPLUG = (1 << 6), /* SCSI hotplug scheduled */ ATA_PFLAG_INITIALIZING = (1 << 7), /* being initialized, don't touch */ + ATA_PFLAG_RESETTING = (1 << 8), /* reset in progress */ ATA_PFLAG_SUSPENDED = (1 << 17), /* port is suspended (power) */ ATA_PFLAG_PM_PENDING = (1 << 18), /* PM operation pending */ @@ -207,6 +216,7 @@ enum { ATA_QCFLAG_DMAMAP = ATA_QCFLAG_SG | ATA_QCFLAG_SINGLE, ATA_QCFLAG_IO = (1 << 3), /* standard IO command */ ATA_QCFLAG_RESULT_TF = (1 << 4), /* result TF requested */ + ATA_QCFLAG_CLEAR_EXCL = (1 << 5), /* clear excl_link on completion */ ATA_QCFLAG_FAILED = (1 << 16), /* cmd failed and is owned by EH */ ATA_QCFLAG_SENSE_VALID = (1 << 17), /* sense data valid */ @@ -263,6 +273,10 @@ enum { /* ering size */ ATA_ERING_SIZE = 32, + /* return values for ->qc_defer */ + ATA_DEFER_LINK = 1, + ATA_DEFER_PORT = 2, + /* desc_len for ata_eh_info and context */ ATA_EH_DESC_LEN = 80, @@ -270,6 +284,7 @@ enum { ATA_EH_REVALIDATE = (1 << 0), ATA_EH_SOFTRESET = (1 << 1), ATA_EH_HARDRESET = (1 << 2), + ATA_EH_ENABLE_LINK = (1 << 3), ATA_EH_RESET_MASK = ATA_EH_SOFTRESET | ATA_EH_HARDRESET, ATA_EH_PERDEV_MASK = ATA_EH_REVALIDATE, @@ -289,12 +304,16 @@ enum { ATA_EHI_DID_RESET = ATA_EHI_DID_SOFTRESET | ATA_EHI_DID_HARDRESET, ATA_EHI_RESET_MODIFIER_MASK = ATA_EHI_RESUME_LINK, - /* max repeat if error condition is still set after ->error_handler */ - ATA_EH_MAX_REPEAT = 5, + /* max tries if error condition is still set after ->error_handler */ + ATA_EH_MAX_TRIES = 5, /* how hard are we gonna try to probe/recover devices */ ATA_PROBE_MAX_TRIES = 3, ATA_EH_DEV_TRIES = 3, + ATA_EH_PMP_TRIES = 5, + ATA_EH_PMP_LINK_TRIES = 3, + + SATA_PMP_SCR_TIMEOUT = 250, /* Horkage types. May be set by libata or controller on drives (some horkage may be drive/controller pair dependant */ @@ -304,6 +323,14 @@ enum { ATA_HORKAGE_NONCQ = (1 << 2), /* Don't use NCQ */ ATA_HORKAGE_MAX_SEC_128 = (1 << 3), /* Limit max sects to 128 */ ATA_HORKAGE_BROKEN_HPA = (1 << 4), /* Broken HPA */ + ATA_HORKAGE_SKIP_PM = (1 << 5), /* Skip PM operations */ + ATA_HORKAGE_HPA_SIZE = (1 << 6), /* native size off by one */ + + /* DMA mask for user DMA control: User visible values; DO NOT + renumber */ + ATA_DMA_MASK_ATA = (1 << 0), /* DMA on ATA Disk */ + ATA_DMA_MASK_ATAPI = (1 << 1), /* DMA on ATAPI */ + ATA_DMA_MASK_CFA = (1 << 2), /* DMA on CF Card */ }; enum hsm_task_states { @@ -333,14 +360,15 @@ enum ata_completion_errors { struct scsi_device; struct ata_port_operations; struct ata_port; +struct ata_link; struct ata_queued_cmd; /* typedefs */ typedef void (*ata_qc_cb_t) (struct ata_queued_cmd *qc); -typedef int (*ata_prereset_fn_t)(struct ata_port *ap, unsigned long deadline); -typedef int (*ata_reset_fn_t)(struct ata_port *ap, unsigned int *classes, +typedef int (*ata_prereset_fn_t)(struct ata_link *link, unsigned long deadline); +typedef int (*ata_reset_fn_t)(struct ata_link *link, unsigned int *classes, unsigned long deadline); -typedef void (*ata_postreset_fn_t)(struct ata_port *ap, unsigned int *classes); +typedef void (*ata_postreset_fn_t)(struct ata_link *link, unsigned int *classes); struct ata_ioports { void __iomem *cmd_addr; @@ -363,8 +391,6 @@ struct ata_ioports { struct ata_host { spinlock_t lock; struct device *dev; - unsigned long irq; - unsigned long irq2; void __iomem * const *iomap; unsigned int n_ports; void *private_data; @@ -436,7 +462,7 @@ struct ata_ering { }; struct ata_device { - struct ata_port *ap; + struct ata_link *link; unsigned int devno; /* 0 or 1 */ unsigned long flags; /* ATA_DFLAG_xxx */ unsigned int horkage; /* List of broken features */ @@ -447,7 +473,12 @@ struct ata_device { /* n_sector is used as CLEAR_OFFSET, read comment above CLEAR_OFFSET */ u64 n_sectors; /* size of device, if ATA */ unsigned int class; /* ATA_DEV_xxx */ - u16 id[ATA_ID_WORDS]; /* IDENTIFY xxx DEVICE data */ + + union { + u16 id[ATA_ID_WORDS]; /* IDENTIFY xxx DEVICE data */ + u32 gscr[SATA_PMP_GSCR_DWORDS]; /* PMP GSCR block */ + }; + u8 pio_mode; u8 dma_mode; u8 xfer_mode; @@ -510,6 +541,27 @@ struct ata_acpi_gtm { u32 flags; } __packed; +struct ata_link { + struct ata_port *ap; + int pmp; /* port multiplier port # */ + + unsigned int active_tag; /* active tag on this link */ + u32 sactive; /* active NCQ commands */ + + unsigned int flags; /* ATA_LFLAG_xxx */ + + unsigned int hw_sata_spd_limit; + unsigned int sata_spd_limit; + unsigned int sata_spd; /* current SATA PHY speed */ + + /* record runtime error info, protected by host_set lock */ + struct ata_eh_info eh_info; + /* EH context */ + struct ata_eh_context eh_context; + + struct ata_device device[ATA_MAX_DEVICES]; +}; + struct ata_port { struct Scsi_Host *scsi_host; /* our co-allocated scsi host */ const struct ata_port_operations *ops; @@ -533,23 +585,17 @@ struct ata_port { unsigned int mwdma_mask; unsigned int udma_mask; unsigned int cbl; /* cable type; ATA_CBL_xxx */ - unsigned int hw_sata_spd_limit; - unsigned int sata_spd_limit; /* SATA PHY speed limit */ - unsigned int sata_spd; /* current SATA PHY speed */ - - /* record runtime error info, protected by host lock */ - struct ata_eh_info eh_info; - /* EH context owned by EH */ - struct ata_eh_context eh_context; - - struct ata_device device[ATA_MAX_DEVICES]; struct ata_queued_cmd qcmd[ATA_MAX_QUEUE]; unsigned long qc_allocated; unsigned int qc_active; + int nr_active_links; /* #links with active qcs */ + + struct ata_link link; /* host default link */ - unsigned int active_tag; - u32 sactive; + int nr_pmp_links; /* nr of available PMP links */ + struct ata_link *pmp_link; /* array of PMP links */ + struct ata_link *excl_link; /* for PMP qc exclusion */ struct ata_port_stats stats; struct ata_host *host; @@ -565,6 +611,7 @@ struct ata_port { u32 msg_enable; struct list_head eh_done_q; wait_queue_head_t eh_wait_q; + int eh_tries; pm_message_t pm_mesg; int *pm_result; @@ -582,8 +629,6 @@ struct ata_port { }; struct ata_port_operations { - void (*port_disable) (struct ata_port *); - void (*dev_config) (struct ata_device *); void (*set_piomode) (struct ata_port *, struct ata_device *); @@ -599,7 +644,7 @@ struct ata_port_operations { void (*dev_select)(struct ata_port *ap, unsigned int device); void (*phy_reset) (struct ata_port *ap); /* obsolete */ - int (*set_mode) (struct ata_port *ap, struct ata_device **r_failed_dev); + int (*set_mode) (struct ata_link *link, struct ata_device **r_failed_dev); int (*cable_detect) (struct ata_port *ap); @@ -610,9 +655,14 @@ struct ata_port_operations { void (*data_xfer) (struct ata_device *, unsigned char *, unsigned int, int); + int (*qc_defer) (struct ata_queued_cmd *qc); void (*qc_prep) (struct ata_queued_cmd *qc); unsigned int (*qc_issue) (struct ata_queued_cmd *qc); + /* port multiplier */ + void (*pmp_attach) (struct ata_port *ap); + void (*pmp_detach) (struct ata_port *ap); + /* Error handlers. ->error_handler overrides ->eng_timeout and * indicates that new-style EH is in place. */ @@ -626,7 +676,6 @@ struct ata_port_operations { irq_handler_t irq_handler; void (*irq_clear) (struct ata_port *); u8 (*irq_on) (struct ata_port *); - u8 (*irq_ack) (struct ata_port *ap, unsigned int chk_drq); int (*scr_read) (struct ata_port *ap, unsigned int sc_reg, u32 *val); int (*scr_write) (struct ata_port *ap, unsigned int sc_reg, u32 val); @@ -646,6 +695,7 @@ struct ata_port_operations { struct ata_port_info { struct scsi_host_template *sht; unsigned long flags; + unsigned long link_flags; unsigned long pio_mask; unsigned long mwdma_mask; unsigned long udma_mask; @@ -689,38 +739,27 @@ static inline int ata_port_is_dummy(struct ata_port *ap) return ap->ops == &ata_dummy_port_ops; } -extern void sata_print_link_status(struct ata_port *ap); +extern void sata_print_link_status(struct ata_link *link); extern void ata_port_probe(struct ata_port *); extern void __sata_phy_reset(struct ata_port *ap); extern void sata_phy_reset(struct ata_port *ap); extern void ata_bus_reset(struct ata_port *ap); -extern int sata_set_spd(struct ata_port *ap); -extern int sata_phy_debounce(struct ata_port *ap, const unsigned long *param, - unsigned long deadline); -extern int sata_phy_resume(struct ata_port *ap, const unsigned long *param, - unsigned long deadline); -extern int ata_std_prereset(struct ata_port *ap, unsigned long deadline); -extern int ata_std_softreset(struct ata_port *ap, unsigned int *classes, +extern int sata_set_spd(struct ata_link *link); +extern int sata_link_debounce(struct ata_link *link, + const unsigned long *params, unsigned long deadline); +extern int sata_link_resume(struct ata_link *link, const unsigned long *params, + unsigned long deadline); +extern int ata_std_prereset(struct ata_link *link, unsigned long deadline); +extern int ata_std_softreset(struct ata_link *link, unsigned int *classes, unsigned long deadline); -extern int sata_port_hardreset(struct ata_port *ap, const unsigned long *timing, - unsigned long deadline); -extern int sata_std_hardreset(struct ata_port *ap, unsigned int *class, +extern int sata_link_hardreset(struct ata_link *link, + const unsigned long *timing, unsigned long deadline); +extern int sata_std_hardreset(struct ata_link *link, unsigned int *class, unsigned long deadline); -extern void ata_std_postreset(struct ata_port *ap, unsigned int *classes); +extern void ata_std_postreset(struct ata_link *link, unsigned int *classes); extern void ata_port_disable(struct ata_port *); extern void ata_std_ports(struct ata_ioports *ioaddr); -#ifdef CONFIG_PCI -extern int ata_pci_init_one (struct pci_dev *pdev, - const struct ata_port_info * const * ppi); -extern void ata_pci_remove_one (struct pci_dev *pdev); -#ifdef CONFIG_PM -extern void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t mesg); -extern int __must_check ata_pci_device_do_resume(struct pci_dev *pdev); -extern int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg); -extern int ata_pci_device_resume(struct pci_dev *pdev); -#endif -extern int ata_pci_clear_simplex(struct pci_dev *pdev); -#endif /* CONFIG_PCI */ + extern struct ata_host *ata_host_alloc(struct device *dev, int max_ports); extern struct ata_host *ata_host_alloc_pinfo(struct device *dev, const struct ata_port_info * const * ppi, int n_ports); @@ -746,12 +785,12 @@ extern int ata_sas_slave_configure(struct scsi_device *, struct ata_port *); extern int ata_sas_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), struct ata_port *ap); extern unsigned int ata_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc); -extern int sata_scr_valid(struct ata_port *ap); -extern int sata_scr_read(struct ata_port *ap, int reg, u32 *val); -extern int sata_scr_write(struct ata_port *ap, int reg, u32 val); -extern int sata_scr_write_flush(struct ata_port *ap, int reg, u32 val); -extern int ata_port_online(struct ata_port *ap); -extern int ata_port_offline(struct ata_port *ap); +extern int sata_scr_valid(struct ata_link *link); +extern int sata_scr_read(struct ata_link *link, int reg, u32 *val); +extern int sata_scr_write(struct ata_link *link, int reg, u32 val); +extern int sata_scr_write_flush(struct ata_link *link, int reg, u32 val); +extern int ata_link_online(struct ata_link *link); +extern int ata_link_offline(struct ata_link *link); #ifdef CONFIG_PM extern int ata_host_suspend(struct ata_host *host, pm_message_t mesg); extern void ata_host_resume(struct ata_host *host); @@ -765,7 +804,8 @@ extern void ata_port_queue_task(struct ata_port *ap, work_func_t fn, extern u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val, unsigned long interval_msec, unsigned long timeout_msec); -extern unsigned int ata_dev_try_classify(struct ata_port *, unsigned int, u8 *); +extern unsigned int ata_dev_try_classify(struct ata_device *dev, int present, + u8 *r_err); /* * Default driver ops implementations @@ -787,6 +827,7 @@ extern void ata_data_xfer(struct ata_device *adev, unsigned char *buf, unsigned int buflen, int write_data); extern void ata_data_xfer_noirq(struct ata_device *adev, unsigned char *buf, unsigned int buflen, int write_data); +extern int ata_std_qc_defer(struct ata_queued_cmd *qc); extern void ata_dumb_qc_prep(struct ata_queued_cmd *qc); extern void ata_qc_prep(struct ata_queued_cmd *qc); extern void ata_noop_qc_prep(struct ata_queued_cmd *qc); @@ -830,11 +871,8 @@ extern void ata_scsi_slave_destroy(struct scsi_device *sdev); extern int ata_scsi_change_queue_depth(struct scsi_device *sdev, int queue_depth); extern struct ata_device *ata_dev_pair(struct ata_device *adev); -extern int ata_do_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev); +extern int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev); extern u8 ata_irq_on(struct ata_port *ap); -extern u8 ata_dummy_irq_on(struct ata_port *ap); -extern u8 ata_irq_ack(struct ata_port *ap, unsigned int chk_drq); -extern u8 ata_dummy_irq_ack(struct ata_port *ap, unsigned int chk_drq); extern int ata_cable_40wire(struct ata_port *ap); extern int ata_cable_80wire(struct ata_port *ap); @@ -869,8 +907,29 @@ enum { ATA_TIMING_CYCLE | ATA_TIMING_UDMA, }; +/* libata-acpi.c */ +#ifdef CONFIG_ATA_ACPI +extern int ata_acpi_cbl_80wire(struct ata_port *ap); +int ata_acpi_stm(const struct ata_port *ap, struct ata_acpi_gtm *stm); +int ata_acpi_gtm(const struct ata_port *ap, struct ata_acpi_gtm *stm); +#else +static inline int ata_acpi_cbl_80wire(struct ata_port *ap) { return 0; } +#endif #ifdef CONFIG_PCI +struct pci_dev; + +extern int ata_pci_init_one (struct pci_dev *pdev, + const struct ata_port_info * const * ppi); +extern void ata_pci_remove_one (struct pci_dev *pdev); +#ifdef CONFIG_PM +extern void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t mesg); +extern int __must_check ata_pci_device_do_resume(struct pci_dev *pdev); +extern int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg); +extern int ata_pci_device_resume(struct pci_dev *pdev); +#endif +extern int ata_pci_clear_simplex(struct pci_dev *pdev); + struct pci_bits { unsigned int reg; /* PCI config register to read */ unsigned int width; /* 1 (8 bit), 2 (16 bit), 4 (32 bit) */ @@ -888,13 +947,29 @@ extern unsigned long ata_pci_default_filter(struct ata_device *, unsigned long); #endif /* CONFIG_PCI */ /* + * PMP + */ +extern int sata_pmp_qc_defer_cmd_switch(struct ata_queued_cmd *qc); +extern int sata_pmp_std_prereset(struct ata_link *link, unsigned long deadline); +extern int sata_pmp_std_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline); +extern void sata_pmp_std_postreset(struct ata_link *link, unsigned int *class); +extern void sata_pmp_do_eh(struct ata_port *ap, + ata_prereset_fn_t prereset, ata_reset_fn_t softreset, + ata_reset_fn_t hardreset, ata_postreset_fn_t postreset, + ata_prereset_fn_t pmp_prereset, ata_reset_fn_t pmp_softreset, + ata_reset_fn_t pmp_hardreset, ata_postreset_fn_t pmp_postreset); + +/* * EH */ extern void ata_eng_timeout(struct ata_port *ap); extern void ata_port_schedule_eh(struct ata_port *ap); +extern int ata_link_abort(struct ata_link *link); extern int ata_port_abort(struct ata_port *ap); extern int ata_port_freeze(struct ata_port *ap); +extern int sata_async_notification(struct ata_port *ap); extern void ata_eh_freeze_port(struct ata_port *ap); extern void ata_eh_thaw_port(struct ata_port *ap); @@ -912,14 +987,25 @@ extern void ata_do_eh(struct ata_port *ap, ata_prereset_fn_t prereset, #define ata_port_printk(ap, lv, fmt, args...) \ printk(lv"ata%u: "fmt, (ap)->print_id , ##args) +#define ata_link_printk(link, lv, fmt, args...) do { \ + if ((link)->ap->nr_pmp_links) \ + printk(lv"ata%u.%02u: "fmt, (link)->ap->print_id, \ + (link)->pmp , ##args); \ + else \ + printk(lv"ata%u: "fmt, (link)->ap->print_id , ##args); \ + } while(0) + #define ata_dev_printk(dev, lv, fmt, args...) \ - printk(lv"ata%u.%02u: "fmt, (dev)->ap->print_id, (dev)->devno , ##args) + printk(lv"ata%u.%02u: "fmt, (dev)->link->ap->print_id, \ + (dev)->link->pmp + (dev)->devno , ##args) /* * ata_eh_info helpers */ -extern void __ata_ehi_push_desc(struct ata_eh_info *ehi, const char *fmt, ...); -extern void ata_ehi_push_desc(struct ata_eh_info *ehi, const char *fmt, ...); +extern void __ata_ehi_push_desc(struct ata_eh_info *ehi, const char *fmt, ...) + __attribute__ ((format (printf, 2, 3))); +extern void ata_ehi_push_desc(struct ata_eh_info *ehi, const char *fmt, ...) + __attribute__ ((format (printf, 2, 3))); extern void ata_ehi_clear_desc(struct ata_eh_info *ehi); static inline void ata_ehi_schedule_probe(struct ata_eh_info *ehi) @@ -933,10 +1019,21 @@ static inline void ata_ehi_hotplugged(struct ata_eh_info *ehi) { ata_ehi_schedule_probe(ehi); ehi->flags |= ATA_EHI_HOTPLUGGED; + ehi->action |= ATA_EH_ENABLE_LINK; ehi->err_mask |= AC_ERR_ATA_BUS; } /* + * port description helpers + */ +extern void ata_port_desc(struct ata_port *ap, const char *fmt, ...) + __attribute__ ((format (printf, 2, 3))); +#ifdef CONFIG_PCI +extern void ata_port_pbar_desc(struct ata_port *ap, int bar, ssize_t offset, + const char *name); +#endif + +/* * qc helpers */ static inline int @@ -991,12 +1088,14 @@ static inline unsigned int ata_tag_internal(unsigned int tag) */ static inline unsigned int ata_class_enabled(unsigned int class) { - return class == ATA_DEV_ATA || class == ATA_DEV_ATAPI; + return class == ATA_DEV_ATA || class == ATA_DEV_ATAPI || + class == ATA_DEV_PMP || class == ATA_DEV_SEMB; } static inline unsigned int ata_class_disabled(unsigned int class) { - return class == ATA_DEV_ATA_UNSUP || class == ATA_DEV_ATAPI_UNSUP; + return class == ATA_DEV_ATA_UNSUP || class == ATA_DEV_ATAPI_UNSUP || + class == ATA_DEV_PMP_UNSUP || class == ATA_DEV_SEMB_UNSUP; } static inline unsigned int ata_class_absent(unsigned int class) @@ -1020,15 +1119,62 @@ static inline unsigned int ata_dev_absent(const struct ata_device *dev) } /* - * port helpers + * link helpers */ -static inline int ata_port_max_devices(const struct ata_port *ap) +static inline int ata_is_host_link(const struct ata_link *link) +{ + return link == &link->ap->link; +} + +static inline int ata_link_max_devices(const struct ata_link *link) { - if (ap->flags & ATA_FLAG_SLAVE_POSS) + if (ata_is_host_link(link) && link->ap->flags & ATA_FLAG_SLAVE_POSS) return 2; return 1; } +static inline int ata_link_active(struct ata_link *link) +{ + return ata_tag_valid(link->active_tag) || link->sactive; +} + +static inline struct ata_link *ata_port_first_link(struct ata_port *ap) +{ + if (ap->nr_pmp_links) + return ap->pmp_link; + return &ap->link; +} + +static inline struct ata_link *ata_port_next_link(struct ata_link *link) +{ + struct ata_port *ap = link->ap; + + if (link == &ap->link) { + if (!ap->nr_pmp_links) + return NULL; + return ap->pmp_link; + } + + if (++link - ap->pmp_link < ap->nr_pmp_links) + return link; + return NULL; +} + +#define __ata_port_for_each_link(lk, ap) \ + for ((lk) = &(ap)->link; (lk); (lk) = ata_port_next_link(lk)) + +#define ata_port_for_each_link(link, ap) \ + for ((link) = ata_port_first_link(ap); (link); \ + (link) = ata_port_next_link(link)) + +#define ata_link_for_each_dev(dev, link) \ + for ((dev) = (link)->device; \ + (dev) < (link)->device + ata_link_max_devices(link) || ((dev) = NULL); \ + (dev)++) + +#define ata_link_for_each_dev_reverse(dev, link) \ + for ((dev) = (link)->device + ata_link_max_devices(link) - 1; \ + (dev) >= (link)->device || ((dev) = NULL); (dev)--) static inline u8 ata_chk_status(struct ata_port *ap) { @@ -1110,9 +1256,11 @@ static inline u8 ata_wait_idle(struct ata_port *ap) { u8 status = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000); +#ifdef ATA_DEBUG if (status != 0xff && (status & (ATA_BUSY | ATA_DRQ))) - DPRINTK("ATA: abnormal status 0x%X on port 0x%p\n", - status, ap->ioaddr.status_addr); + ata_port_printk(ap, KERN_DEBUG, "abnormal Status 0x%X\n", + status); +#endif return status; } @@ -1149,7 +1297,7 @@ static inline void ata_tf_init(struct ata_device *dev, struct ata_taskfile *tf) { memset(tf, 0, sizeof(*tf)); - tf->ctl = dev->ap->ctl; + tf->ctl = dev->link->ap->ctl; if (dev->devno == 0) tf->device = ATA_DEVICE_OBS; else |
