diff options
126 files changed, 1361 insertions, 507 deletions
diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface index dcbd502..82def88 100644 --- a/Documentation/hwmon/sysfs-interface +++ b/Documentation/hwmon/sysfs-interface @@ -353,10 +353,20 @@ power[1-*]_average Average power use Unit: microWatt RO -power[1-*]_average_interval Power use averaging interval +power[1-*]_average_interval Power use averaging interval. A poll + notification is sent to this file if the + hardware changes the averaging interval. Unit: milliseconds RW +power[1-*]_average_interval_max Maximum power use averaging interval + Unit: milliseconds + RO + +power[1-*]_average_interval_min Minimum power use averaging interval + Unit: milliseconds + RO + power[1-*]_average_highest Historical average maximum power use Unit: microWatt RO @@ -365,6 +375,18 @@ power[1-*]_average_lowest Historical average minimum power use Unit: microWatt RO +power[1-*]_average_max A poll notification is sent to + power[1-*]_average when power use + rises above this value. + Unit: microWatt + RW + +power[1-*]_average_min A poll notification is sent to + power[1-*]_average when power use + sinks below this value. + Unit: microWatt + RW + power[1-*]_input Instantaneous power use Unit: microWatt RO @@ -381,6 +403,39 @@ power[1-*]_reset_history Reset input_highest, input_lowest, average_highest and average_lowest. WO +power[1-*]_accuracy Accuracy of the power meter. + Unit: Percent + RO + +power[1-*]_alarm 1 if the system is drawing more power than the + cap allows; 0 otherwise. A poll notification is + sent to this file when the power use exceeds the + cap. This file only appears if the cap is known + to be enforced by hardware. + RO + +power[1-*]_cap If power use rises above this limit, the + system should take action to reduce power use. + A poll notification is sent to this file if the + cap is changed by the hardware. The *_cap + files only appear if the cap is known to be + enforced by hardware. + Unit: microWatt + RW + +power[1-*]_cap_hyst Margin of hysteresis built around capping and + notification. + Unit: microWatt + RW + +power[1-*]_cap_max Maximum cap that can be set. + Unit: microWatt + RO + +power[1-*]_cap_min Minimum cap that can be set. + Unit: microWatt + RO + ********** * Energy * ********** diff --git a/Documentation/vm/hwpoison.txt b/Documentation/vm/hwpoison.txt new file mode 100644 index 0000000..3ffadf8 --- /dev/null +++ b/Documentation/vm/hwpoison.txt @@ -0,0 +1,136 @@ +What is hwpoison? + +Upcoming Intel CPUs have support for recovering from some memory errors +(``MCA recovery''). This requires the OS to declare a page "poisoned", +kill the processes associated with it and avoid using it in the future. + +This patchkit implements the necessary infrastructure in the VM. + +To quote the overview comment: + + * High level machine check handler. Handles pages reported by the + * hardware as being corrupted usually due to a 2bit ECC memory or cache + * failure. + * + * This focusses on pages detected as corrupted in the background. + * When the current CPU tries to consume corruption the currently + * running process can just be killed directly instead. This implies + * that if the error cannot be handled for some reason it's safe to + * just ignore it because no corruption has been consumed yet. Instead + * when that happens another machine check will happen. + * + * Handles page cache pages in various states. The tricky part + * here is that we can access any page asynchronous to other VM + * users, because memory failures could happen anytime and anywhere, + * possibly violating some of their assumptions. This is why this code + * has to be extremely careful. Generally it tries to use normal locking + * rules, as in get the standard locks, even if that means the + * error handling takes potentially a long time. + * + * Some of the operations here are somewhat inefficient and have non + * linear algorithmic complexity, because the data structures have not + * been optimized for this case. This is in particular the case + * for the mapping from a vma to a process. Since this case is expected + * to be rare we hope we can get away with this. + +The code consists of a the high level handler in mm/memory-failure.c, +a new page poison bit and various checks in the VM to handle poisoned +pages. + +The main target right now is KVM guests, but it works for all kinds +of applications. KVM support requires a recent qemu-kvm release. + +For the KVM use there was need for a new signal type so that +KVM can inject the machine check into the guest with the proper +address. This in theory allows other applications to handle +memory failures too. The expection is that near all applications +won't do that, but some very specialized ones might. + +--- + +There are two (actually three) modi memory failure recovery can be in: + +vm.memory_failure_recovery sysctl set to zero: + All memory failures cause a panic. Do not attempt recovery. + (on x86 this can be also affected by the tolerant level of the + MCE subsystem) + +early kill + (can be controlled globally and per process) + Send SIGBUS to the application as soon as the error is detected + This allows applications who can process memory errors in a gentle + way (e.g. drop affected object) + This is the mode used by KVM qemu. + +late kill + Send SIGBUS when the application runs into the corrupted page. + This is best for memory error unaware applications and default + Note some pages are always handled as late kill. + +--- + +User control: + +vm.memory_failure_recovery + See sysctl.txt + +vm.memory_failure_early_kill + Enable early kill mode globally + +PR_MCE_KILL + Set early/late kill mode/revert to system default + arg1: PR_MCE_KILL_CLEAR: Revert to system default + arg1: PR_MCE_KILL_SET: arg2 defines thread specific mode + PR_MCE_KILL_EARLY: Early kill + PR_MCE_KILL_LATE: Late kill + PR_MCE_KILL_DEFAULT: Use system global default +PR_MCE_KILL_GET + return current mode + + +--- + +Testing: + +madvise(MADV_POISON, ....) + (as root) + Poison a page in the process for testing + + +hwpoison-inject module through debugfs + /sys/debug/hwpoison/corrupt-pfn + +Inject hwpoison fault at PFN echoed into this file + + +Architecture specific MCE injector + +x86 has mce-inject, mce-test + +Some portable hwpoison test programs in mce-test, see blow. + +--- + +References: + +http://halobates.de/mce-lc09-2.pdf + Overview presentation from LinuxCon 09 + +git://git.kernel.org/pub/scm/utils/cpu/mce/mce-test.git + Test suite (hwpoison specific portable tests in tsrc) + +git://git.kernel.org/pub/scm/utils/cpu/mce/mce-inject.git + x86 specific injector + + +--- + +Limitations: + +- Not all page types are supported and never will. Most kernel internal +objects cannot be recovered, only LRU pages for now. +- Right now hugepage support is missing. + +--- +Andi Kleen, Oct 2009 + diff --git a/MAINTAINERS b/MAINTAINERS index 8824115..a1a2ace 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -65,43 +65,51 @@ trivial patch so apply some common sense. 8. Happy hacking. - ----------------------------------- - -Maintainers List (try to look for most precise areas first) +Descriptions of section entries: + + P: Person (obsolete) + M: Mail patches to: FullName <address@domain> + L: Mailing list that is relevant to this area + W: Web-page with status/info + T: SCM tree type and location. Type is one of: git, hg, quilt, stgit. + S: Status, one of the following: + Supported: Someone is actually paid to look after this. + Maintained: Someone actually looks after it. + Odd Fixes: It has a maintainer but they don't have time to do + much other than throw the odd patch in. See below.. + Orphan: No current maintainer [but maybe you could take the + role as you write your new code]. + Obsolete: Old code. Something tagged obsolete generally means + it has been replaced by a better system and you + should be using that. + F: Files and directories with wildcard patterns. + A trailing slash includes all files and subdirectory files. + F: drivers/net/ all files in and below drivers/net + F: drivers/net/* all files in drivers/net, but not below + F: */net/* all files in "any top level directory"/net + One pattern per line. Multiple F: lines acceptable. + X: Files and directories that are NOT maintained, same rules as F: + Files exclusions are tested before file matches. + Can be useful for excluding a specific subdirectory, for instance: + F: net/ + X: net/ipv6/ + matches all files in and below net excluding net/ipv6/ + K: Keyword perl extended regex pattern to match content in a + patch or file. For instance: + K: of_get_profile + matches patches or files that contain "of_get_profile" + K: \b(printk|pr_(info|err))\b + matches patches or files that contain one or more of the words + printk, pr_info or pr_err + One regex pattern per line. Multiple K: lines acceptable. Note: For the hard of thinking, this list is meant to remain in alphabetical order. If you could add yourselves to it in alphabetical order that would be so much easier [Ed] -P: Person (obsolete) -M: Mail patches to: FullName <address@domain> -L: Mailing list that is relevant to this area -W: Web-page with status/info -T: SCM tree type and location. Type is one of: git, hg, quilt, stgit. -S: Status, one of the following: - - Supported: Someone is actually paid to look after this. - Maintained: Someone actually looks after it. - Odd Fixes: It has a maintainer but they don't have time to do - much other than throw the odd patch in. See below.. - Orphan: No current maintainer [but maybe you could take the - role as you write your new code]. - Obsolete: Old code. Something tagged obsolete generally means - it has been replaced by a better system and you - should be using that. +Maintainers List (try to look for most precise areas first) -F: Files and directories with wildcard patterns. - A trailing slash includes all files and subdirectory files. - F: drivers/net/ all files in and below drivers/net - F: drivers/net/* all files in drivers/net, but not below - F: */net/* all files in "any top level directory"/net - One pattern per line. Multiple F: lines acceptable. -X: Files and directories that are NOT maintained, same rules as F: - Files exclusions are tested before file matches. - Can be useful for excluding a specific subdirectory, for instance: - F: net/ - X: net/ipv6/ - matches all files in and below net excluding net/ipv6/ + ----------------------------------- 3C505 NETWORK DRIVER M: Philip Blundell <philb@gnu.org> @@ -992,7 +1000,7 @@ F: drivers/net/atlx/ ATM M: Chas Williams <chas@cmf.nrl.navy.mil> -L: linux-atm-general@lists.sourceforge.net (subscribers-only) +L: linux-atm-general@lists.sourceforge.net (moderated for non-subscribers) L: netdev@vger.kernel.org W: http://linux-atm.sourceforge.net S: Maintained @@ -1480,6 +1488,7 @@ F: mm/*cgroup* CORETEMP HARDWARE MONITORING DRIVER M: Rudolf Marek <r.marek@assembler.cz> +M: Huaxu Wan <huaxu.wan@intel.com> L: lm-sensors@lm-sensors.org S: Maintained F: Documentation/hwmon/coretemp @@ -2151,7 +2160,7 @@ S: Supported F: arch/powerpc/sysdev/qe_lib/ F: arch/powerpc/include/asm/*qe.h -FREESCALE USB PERIPHERIAL DRIVERS +FREESCALE USB PERIPHERAL DRIVERS M: Li Yang <leoli@freescale.com> L: linux-usb@vger.kernel.org L: linuxppc-dev@ozlabs.org @@ -2202,18 +2211,6 @@ F: Documentation/filesystems/caching/ F: fs/fscache/ F: include/linux/fscache*.h -TRACING -M: Steven Rostedt <rostedt@goodmis.org> -M: Frederic Weisbecker <fweisbec@gmail.com> -M: Ingo Molnar <mingo@redhat.com> -T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git tracing/core -S: Maintained -F: Documentation/trace/ftrace.txt -F: arch/*/*/*/ftrace.h -F: arch/*/kernel/ftrace.c -F: include/*/ftrace.h include/trace/ include/linux/trace*.h -F: kernel/trace/ - FUJITSU FR-V (FRV) PORT M: David Howells <dhowells@redhat.com> S: Maintained @@ -2272,9 +2269,8 @@ S: Maintained F: include/asm-generic GENERIC UIO DRIVER FOR PCI DEVICES -M: Michael S. Tsirkin <mst@redhat.com> +M: "Michael S. Tsirkin" <mst@redhat.com> L: kvm@vger.kernel.org -L: linux-kernel@vger.kernel.org S: Supported F: drivers/uio/uio_pci_generic.c @@ -3004,8 +3000,8 @@ F: scripts/Makefile.* KERNEL JANITORS L: kernel-janitors@vger.kernel.org -W: http://www.kerneljanitors.org/ -S: Maintained +W: http://janitor.kernelnewbies.org/ +S: Odd Fixes KERNEL NFSD, SUNRPC, AND LOCKD SERVERS M: "J. Bruce Fields" <bfields@fieldses.org> @@ -3785,7 +3781,7 @@ F: drivers/video/riva/ F: drivers/video/nvidia/ OMAP SUPPORT -M: "Tony Lindgren <tony@atomide.com>" <tony@atomide.com> +M: Tony Lindgren <tony@atomide.com> L: linux-omap@vger.kernel.org W: http://www.muru.com/linux/omap/ W: http://linux.omap.com/ @@ -3890,6 +3886,15 @@ S: Maintained F: Documentation/i2c/busses/i2c-ocores F: drivers/i2c/busses/i2c-ocores.c +OPEN FIRMWARE AND FLATTENED DEVICE TREE +M: Grant Likely <grant.likely@secretlab.ca> +L: devicetree-discuss@lists.ozlabs.org +W: http://fdt.secretlab.ca +S: Maintained +F: drivers/of +F: include/linux/of*.h +K: of_get_property + OPROFILE M: Robert Richter <robert.richter@amd.com> L: oprofile-list@lists.sf.net @@ -4325,7 +4330,7 @@ F: drivers/video/aty/aty128fb.c RALINK RT2X00 WIRELESS LAN DRIVER P: rt2x00 project L: linux-wireless@vger.kernel.org -L: users@rt2x00.serialmonkey.com +L: users@rt2x00.serialmonkey.com (moderated for non-subscribers) W: http://rt2x00.serialmonkey.com/ S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git @@ -4534,12 +4539,11 @@ F: kernel/sched* F: include/linux/sched.h SCORE ARCHITECTURE -P: Chen Liqin -M: liqin.chen@sunplusct.com -P: Lennox Wu -M: lennox.wu@gmail.com +M: Chen Liqin <liqin.chen@sunplusct.com> +M: Lennox Wu <lennox.wu@gmail.com> W: http://www.sunplusct.com S: Supported +F: arch/score/ SCSI CDROM DRIVER M: Jens Axboe <axboe@kernel.dk> @@ -4612,20 +4616,20 @@ S: Maintained F: drivers/mmc/host/sdricoh_cs.c SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) DRIVER -S: Orphan -L: linux-mmc@vger.kernel.org -F: drivers/mmc/host/sdhci.* +S: Orphan +L: linux-mmc@vger.kernel.org +F: drivers/mmc/host/sdhci.* SECURE DIGITAL HOST CONTROLLER INTERFACE, OPEN FIRMWARE BINDINGS (SDHCI-OF) M: Anton Vorontsov <avorontsov@ru.mvista.com> L: linuxppc-dev@ozlabs.org -L: linux-mmc@vger.kernel.org +L: linux-mmc@vger.kernel.org S: Maintained -F: drivers/mmc/host/sdhci-of.* +F: drivers/mmc/host/sdhci-of.* SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) SAMSUNG DRIVER M: Ben Dooks <ben-linux@fluff.org> -L: linux-mmc@vger.kernel.org +L: linux-mmc@vger.kernel.org S: Maintained F: drivers/mmc/host/sdhci-s3c.c @@ -4728,8 +4732,7 @@ F: drivers/usb/gadget/lh7a40* F: drivers/usb/host/ohci-lh7a40* SIMPLE FIRMWARE INTERFACE (SFI) -P: Len Brown -M: lenb@kernel.org +M: Len Brown <lenb@kernel.org> L: sfi-devel@simplefirmware.org W: http://simplefirmware.org/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-sfi-2.6.git @@ -5177,6 +5180,20 @@ L: tpmdd-devel@lists.sourceforge.net (moderated for non-subscribers) S: Maintained F: drivers/char/tpm/ +TRACING +M: Steven Rostedt <rostedt@goodmis.org> +M: Frederic Weisbecker <fweisbec@gmail.com> +M: Ingo Molnar <mingo@redhat.com> +T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git tracing/core +S: Maintained +F: Documentation/trace/ftrace.txt +F: arch/*/*/*/ftrace.h +F: arch/*/kernel/ftrace.c +F: include/*/ftrace.h +F: include/linux/trace*.h +F: include/trace/ +F: kernel/trace/ + TRIVIAL PATCHES M: Jiri Kosina <trivial@kernel.org> T: git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial.git @@ -5743,8 +5760,7 @@ S: Maintained F: drivers/scsi/wd7000.c WINBOND CIR DRIVER -P: David Härdeman -M: david@hardeman.nu +M: David Härdeman <david@hardeman.nu> S: Maintained F: drivers/input/misc/winbond-cir.c @@ -5801,9 +5817,7 @@ F: drivers/input/touchscreen/*wm97* F: include/linux/wm97xx.h WOLFSON MICROELECTRONICS PMIC DRIVERS -P: Mark Brown -M: broonie@opensource.wolfsonmicro.com -L: linux-kernel@vger.kernel.org +M: Mark Brown <broonie@opensource.wolfsonmicro.com> T: git git://opensource.wolfsonmicro.com/linux-2.6-audioplus W: http://opensource.wolfsonmicro.com/node/8 S: Supported diff --git a/arch/arm/configs/n8x0_defconfig b/arch/arm/configs/n8x0_defconfig index 8da75de..264f52b 100644 --- a/arch/arm/configs/n8x0_defconfig +++ b/arch/arm/configs/n8x0_defconfig @@ -304,7 +304,7 @@ CONFIG_ALIGNMENT_TRAP=y CONFIG_ZBOOT_ROM_TEXT=0x10C08000 CONFIG_ZBOOT_ROM_BSS=0x10200000 # CONFIG_ZBOOT_ROM is not set -CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 console=ttyS0,115200n8" +CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 console=ttyS2,115200n8" # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig index 7d61ae6..953ba02 100644 --- a/arch/arm/configs/u300_defconfig +++ b/arch/arm/configs/u300_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc3 -# Thu Jul 16 23:36:10 2009 +# Linux kernel version: 2.6.32-rc5 +# Sat Oct 17 23:32:24 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y +CONFIG_HAVE_TCM=y CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -44,11 +44,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_GROUP_SCHED is not set @@ -80,17 +81,15 @@ CONFIG_SHMEM=y # CONFIG_AIO is not set # -# Performance Counters +# Kernel Performance Events And Counters # # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y @@ -133,6 +132,7 @@ CONFIG_DEFAULT_IOSCHED="deadline" # # System Type # +CONFIG_MMU=y # CONFIG_ARCH_AAEC2000 is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set @@ -147,6 +147,7 @@ CONFIG_DEFAULT_IOSCHED="deadline" # CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -169,11 +170,13 @@ CONFIG_DEFAULT_IOSCHED="deadline" # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set CONFIG_ARCH_U300=y # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_BCMRING is not set # # ST-Ericsson AB U300/U330/U335/U365 Platform @@ -195,6 +198,7 @@ CONFIG_MACH_U300_BS335=y CONFIG_MACH_U300_DUAL_RAM=y CONFIG_U300_DEBUG=y # CONFIG_MACH_U300_SEMI_IS_SHARED is not set +CONFIG_MACH_U300_SPIDUMMY=y # # All the settings below must match the bootloader's settings @@ -207,7 +211,7 @@ CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y -CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_PABRT_LEGACY=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_COPY_V4WB=y CONFIG_CPU_TLB_V4WBI=y @@ -222,6 +226,7 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_DCACHE_WRITETHROUGH is not set # CONFIG_CPU_CACHE_ROUND_ROBIN is not set +CONFIG_ARM_L1_CACHE_SHIFT=5 CONFIG_ARM_VIC=y CONFIG_ARM_VIC_NR=2 CONFIG_COMMON_CLKDEV=y @@ -245,6 +250,8 @@ CONFIG_VMSPLIT_3G=y # CONFIG_VMSPLIT_2G is not set # CONFIG_VMSPLIT_1G is not set CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y @@ -265,6 +272,7 @@ CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_ALIGNMENT_TRAP=y # CONFIG_UACCESS_WITH_MEMCPY is not set @@ -313,6 +321,7 @@ CONFIG_PM=y # CONFIG_PM_DEBUG is not set # CONFIG_SUSPEND is not set # CONFIG_APM_EMULATION is not set +# CONFIG_PM_RUNTIME is not set CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_NET=y @@ -351,6 +360,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -391,6 +401,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y # CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_FW_LOADER=y @@ -402,9 +413,9 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set @@ -453,6 +464,7 @@ CONFIG_MTD_CFI_I2=y # # CONFIG_MTD_DATAFLASH is not set # CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SST25L is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -520,6 +532,7 @@ CONFIG_HAVE_IDE=y # CONFIG_MD is not set # CONFIG_NETDEVICES is not set # CONFIG_ISDN is not set +# CONFIG_PHONE is not set # # Input device support @@ -540,12 +553,16 @@ CONFIG_INPUT_EVDEV=y # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set # CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_QT2160 is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_GPIO is not set # CONFIG_KEYBOARD_MATRIX is not set # CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_MAX7359 is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_XTKBD is not set @@ -597,6 +614,7 @@ CONFIG_LEGACY_PTY_COUNT=16 # CONFIG_TCG_TPM is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y # CONFIG_I2C_CHARDEV is not set CONFIG_I2C_HELPER_AUTO=y @@ -629,9 +647,6 @@ CONFIG_I2C_STU300=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -653,16 +668,21 @@ CONFIG_SPI_PL022=y # # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set # CONFIG_W1 is not set CONFIG_POWER_SUPPLY=y # CONFIG_POWER_SUPPLY_DEBUG is not set # CONFIG_PDA_POWER is not set # CONFIG_BATTERY_DS2760 is not set +# CONFIG_BATTERY_DS2782 is not set # CONFIG_BATTERY_BQ27x00 is not set # CONFIG_BATTERY_MAX17040 is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -690,10 +710,24 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TC6387XB is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set CONFIG_AB3100_CORE=y +CONFIG_AB3100_OTP=y # CONFIG_EZX_PCAP is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_REGULATOR_MAX1586 is not set +# CONFIG_REGULATOR_LP3971 is not set +CONFIG_REGULATOR_AB3100=y +# CONFIG_REGULATOR_TPS65023 is not set +# CONFIG_REGULATOR_TPS6507X is not set # CONFIG_MEDIA_SUPPORT is not set # @@ -792,9 +826,10 @@ CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_MMC_ARMMMCI=y # CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_AT91 is not set +# CONFIG_MMC_ATMELMCI is not set # CONFIG_MMC_SPI is not set # CONFIG_MEMSTICK is not set -# CONFIG_ACCESSIBILITY is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y @@ -820,10 +855,10 @@ CONFIG_LEDS_TRIGGER_BACKLIGHT=y # # iptables trigger is under Netfilter config (LED target) # +# CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_HCTOSYS is not set # CONFIG_RTC_DEBUG is not set # @@ -863,6 +898,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set # # Platform RTC drivers @@ -878,27 +914,25 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set +CONFIG_RTC_DRV_AB3100=y # # on-CPU RTC drivers # # CONFIG_RTC_DRV_PL030 is not set # CONFIG_RTC_DRV_PL031 is not set +CONFIG_RTC_DRV_COH901331=y CONFIG_DMADEVICES=y # # DMA Devices # # CONFIG_AUXDISPLAY is not set -CONFIG_REGULATOR=y -# CONFIG_REGULATOR_DEBUG is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set -# CONFIG_REGULATOR_MAX1586 is not set -# CONFIG_REGULATOR_LP3971 is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -913,6 +947,7 @@ CONFIG_REGULATOR=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set @@ -975,7 +1010,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set # CONFIG_NETWORK_FILESYSTEMS is not set # @@ -1033,6 +1067,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1066,11 +1101,13 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set @@ -1121,6 +1158,7 @@ CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC32 is not set # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set +CONFIG_GENERIC_ALLOCATOR=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h index c3b911e..6aac3f5 100644 --- a/arch/arm/include/asm/elf.h +++ b/arch/arm/include/asm/elf.h @@ -98,6 +98,9 @@ extern int elf_check_arch(const struct elf32_hdr *); extern int arm_elf_read_implies_exec(const struct elf32_hdr *, int); #define elf_read_implies_exec(ex,stk) arm_elf_read_implies_exec(&(ex), stk) +int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs); +#define ELF_CORE_COPY_TASK_REGS dump_task_regs + #define USE_ELF_CORE_DUMP #define ELF_EXEC_PAGESIZE 4096 diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h index a45ab5d..c2f1605 100644 --- a/arch/arm/include/asm/tlbflush.h +++ b/arch/arm/include/asm/tlbflush.h @@ -350,7 +350,7 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm) if (tlb_flag(TLB_WB)) dsb(); - if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm))) { + if (cpumask_test_cpu(get_cpu(), mm_cpumask(mm))) { if (tlb_flag(TLB_V3_FULL)) asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (zero) : "cc"); if (tlb_flag(TLB_V4_U_FULL)) @@ -360,6 +360,7 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm) if (tlb_flag(TLB_V4_I_FULL)) asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc"); } + put_cpu(); if (tlb_flag(TLB_V6_U_ASID)) asm("mcr p15, 0, %0, c8, c7, 2" : : "r" (asid) : "cc"); diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 322410b..0022b4d 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -608,33 +608,33 @@ call_fpe: THUMB( add pc, r8 ) nop - W(mov) pc, lr @ CP#0 + movw_pc lr @ CP#0 W(b) do_fpe @ CP#1 (FPE) W(b) do_fpe @ CP#2 (FPE) - W(mov) pc, lr @ CP#3 + movw_pc lr @ CP#3 #ifdef CONFIG_CRUNCH b crunch_task_enable @ CP#4 (MaverickCrunch) b crunch_task_enable @ CP#5 (MaverickCrunch) b crunch_task_enable @ CP#6 (MaverickCrunch) #else - W(mov) pc, lr @ CP#4 - W(mov) pc, lr @ CP#5 - W(mov) pc, lr @ CP#6 + movw_pc lr @ CP#4 + movw_pc lr @ CP#5 + movw_pc lr @ CP#6 #endif - W(mov) pc, lr @ CP#7 - W(mov) pc, lr @ CP#8 - W(mov) pc, lr @ CP#9 + movw_pc lr @ CP#7 + movw_pc lr @ CP#8 + movw_pc lr @ CP#9 #ifdef CONFIG_VFP W(b) do_vfp @ CP#10 (VFP) W(b) do_vfp @ CP#11 (VFP) #else - W(mov) pc, lr @ CP#10 (VFP) - W(mov) pc, lr @ CP#11 (VFP) + movw_pc lr @ CP#10 (VFP) + movw_pc lr @ CP#11 (VFP) #endif - W(mov) pc, lr @ CP#12 - W(mov) pc, lr @ CP#13 - W(mov) pc, lr @ CP#14 (Debug) - W(mov) pc, lr @ CP#15 (Control) + movw_pc lr @ CP#12 + movw_pc lr @ CP#13 + movw_pc lr @ CP#14 (Debug) + movw_pc lr @ CP#15 (Control) #ifdef CONFIG_NEON .align 6 diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S index ac34c0d..7e9ed1e 100644 --- a/arch/arm/kernel/entry-header.S +++ b/arch/arm/kernel/entry-header.S @@ -110,6 +110,13 @@ mov \rd, sp, lsr #13 mov \rd, \rd, lsl #13 .endm + + @ + @ 32-bit wide "mov pc, reg" + @ + .macro movw_pc, reg + mov pc, \reg + .endm #else /* CONFIG_THUMB2_KERNEL */ .macro svc_exit, rpsr clrex @ clear the exclusive monitor @@ -146,6 +153,14 @@ lsr \rd, \rd, #13 mov \rd, \rd, lsl #13 .endm + + @ + @ 32-bit wide "mov pc, reg" + @ + .macro movw_pc, reg + mov pc, \reg + nop + .endm #endif /* !CONFIG_THUMB2_KERNEL */ /* diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 790fbee..0d96d01 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -328,6 +328,15 @@ copy_thread(unsigned long clone_flags, unsigned long stack_start, } /* + * Fill in the task's elfregs structure for a core dump. + */ +int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs) +{ + elf_core_copy_regs(elfregs, task_pt_regs(t)); + return 1; +} + +/* * fill in the fpe structure for a core dump... */ int dump_fpu (struct pt_regs *regs, struct user_fp *fp) diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index d581cff..332b784 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -838,7 +838,7 @@ static void __init at91_add_device_rtt(void) * Watchdog * -------------------------------------------------------------------- */ -#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE) +#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE) static struct platform_device at91sam9g45_wdt_device = { .name = "at91_wdt", .id = -1, diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index f95dc16..b4357c3 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -206,7 +206,6 @@ static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc) for (i = 0; i < 8; i++) { if (status & (1 << i)) { int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_B(0)) + i; - desc = irq_desc + gpio_irq; generic_handle_irq(gpio_irq); } } diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c index ca71cf1a..a4a7be3 100644 --- a/arch/arm/mach-ep93xx/edb93xx.c +++ b/arch/arm/mach-ep93xx/edb93xx.c @@ -112,7 +112,7 @@ static void __init edb93xx_register_i2c(void) ARRAY_SIZE(edb93xxa_i2c_board_info)); } else if (machine_is_edb9307() || machine_is_edb9312() || machine_is_edb9315()) { - ep93xx_register_i2c(&edb93xx_i2c_gpio_data + ep93xx_register_i2c(&edb93xx_i2c_gpio_data, edb93xx_i2c_board_info, ARRAY_SIZE(edb93xx_i2c_board_info)); } diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h index a3ec33f..469fd96 100644 --- a/arch/arm/mach-ep93xx/include/mach/platform.h +++ b/arch/arm/mach-ep93xx/include/mach/platform.h @@ -17,7 +17,6 @@ struct ep93xx_eth_data void ep93xx_map_io(void); void ep93xx_init_irq(void); -void ep93xx_init_time(unsigned long); /* EP93xx System Controller software locked register write */ void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg); diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c index 4089951..ff5e332 100644 --- a/arch/arm/mach-mx2/clock_imx27.c +++ b/arch/arm/mach-mx2/clock_imx27.c @@ -638,9 +638,9 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk) _REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk) _REGISTER_CLOCK("mxc-mmc.2", NULL, sdhc3_clk) - _REGISTER_CLOCK(NULL, "cspi1", cspi1_clk) - _REGISTER_CLOCK(NULL, "cspi2", cspi2_clk) - _REGISTER_CLOCK(NULL, "cspi3", cspi3_clk) + _REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk) + _REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk) + _REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk) _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk) _REGISTER_CLOCK(NULL, "csi", csi_clk) _REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk) @@ -665,7 +665,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "sahara2", sahara2_clk) _REGISTER_CLOCK(NULL, "ata", ata_clk) _REGISTER_CLOCK(NULL, "mstick", mstick_clk) - _REGISTER_CLOCK(NULL, "wdog", wdog_clk) + _REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk) _REGISTER_CLOCK(NULL, "gpio", gpio_clk) _REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk) _REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk) diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c index ee65dda..906d59b 100644 --- a/arch/arm/mach-mx2/pcm038.c +++ b/arch/arm/mach-mx2/pcm038.c @@ -23,6 +23,10 @@ #include <linux/mtd/plat-ram.h> #include <linux/mtd/physmap.h> #include <linux/platform_device.h> +#include <linux/regulator/machine.h> +#include <linux/mfd/mc13783.h> +#include <linux/spi/spi.h> +#include <linux/irq.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -35,6 +39,7 @@ #include <mach/iomux.h> #include <mach/imx-uart.h> #include <mach/mxc_nand.h> +#include <mach/spi.h> #include "devices.h" @@ -78,8 +83,6 @@ static int pcm038_pins[] = { PC6_PF_I2C2_SCL, /* SPI1 */ PD25_PF_CSPI1_RDY, - PD27_PF_CSPI1_SS1, - PD28_PF_CSPI1_SS0, PD29_PF_CSPI1_SCLK, PD30_PF_CSPI1_MISO, PD31_PF_CSPI1_MOSI, @@ -196,6 +199,86 @@ static struct i2c_board_info pcm038_i2c_devices[] = { } }; +static int pcm038_spi_cs[] = {GPIO_PORTD + 28}; + +static struct spi_imx_master pcm038_spi_0_data = { + .chipselect = pcm038_spi_cs, + .num_chipselect = ARRAY_SIZE(pcm038_spi_cs), +}; + +static struct regulator_consumer_supply sdhc1_consumers[] = { + { + .dev = &mxc_sdhc_device1.dev, + .supply = "sdhc_vcc", + }, +}; + +static struct regulator_init_data sdhc1_data = { + .constraints = { + .min_uV = 3000000, + .max_uV = 3400000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_FAST, + .always_on = 0, + .boot_on = 0, + }, + .num_consumer_supplies = ARRAY_SIZE(sdhc1_consumers), + .consumer_supplies = sdhc1_consumers, +}; + +static struct regulator_consumer_supply cam_consumers[] = { + { + .dev = NULL, + .supply = "imx_cam_vcc", + }, +}; + +static struct regulator_init_data cam_data = { + .constraints = { + .min_uV = 3000000, + .max_uV = 3400000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_FAST, + .always_on = 0, + .boot_on = 0, + }, + .num_consumer_supplies = ARRAY_SIZE(cam_consumers), + .consumer_supplies = cam_consumers, +}; + +struct mc13783_regulator_init_data pcm038_regulators[] = { + { + .id = MC13783_REGU_VCAM, + .init_data = &cam_data, + }, { + .id = MC13783_REGU_VMMC1, + .init_data = &sdhc1_data, + }, +}; + +static struct mc13783_platform_data pcm038_pmic = { + .regulators = pcm038_regulators, + .num_regulators = ARRAY_SIZE(pcm038_regulators), + .flags = MC13783_USE_ADC | MC13783_USE_REGULATOR | + MC13783_USE_TOUCHSCREEN, +}; + +static struct spi_board_info pcm038_spi_board_info[] __initdata = { + { + .modalias = "mc13783", + .irq = IRQ_GPIOB(23), + .max_speed_hz = 300000, + .bus_num = 0, + .chip_select = 0, + .platform_data = &pcm038_pmic, + .mode = SPI_CS_HIGH, + } +}; + static void __init pcm038_init(void) { mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins), @@ -219,6 +302,15 @@ static void __init pcm038_init(void) /* PE18 for user-LED D40 */ mxc_gpio_mode(GPIO_PORTE | 18 | GPIO_GPIO | GPIO_OUT); + mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT); + + /* MC13783 IRQ */ + mxc_gpio_mode(GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN); + + mxc_register_device(&mxc_spi_device0, &pcm038_spi_0_data); + spi_register_board_info(pcm038_spi_board_info, + ARRAY_SIZE(pcm038_spi_board_info)); + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); #ifdef CONFIG_MACH_PCM970_BASEBOARD diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c index c261f59..3cb7f45 100644 --- a/arch/arm/mach-mx2/pcm970-baseboard.c +++ b/arch/arm/mach-mx2/pcm970-baseboard.c @@ -39,7 +39,6 @@ static int pcm970_pins[] = { PB7_PF_SD2_D3, PB8_PF_SD2_CMD, PB9_PF_SD2_CLK, - GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN, /* card detect */ /* display */ PA5_PF_LSCLK, PA6_PF_LD0, @@ -228,6 +227,7 @@ void __init pcm970_baseboard_init(void) "PCM970"); mxc_register_device(&mxc_fb_device, &pcm038_fb_data); + mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN); mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata); platform_device_register(&pcm970_sja1000); } diff --git a/arch/arm/mach-mx25/devices.c b/arch/arm/mach-mx25/devices.c index eb12de1..63511de 100644 --- a/arch/arm/mach-mx25/devices.c +++ b/arch/arm/mach-mx25/devices.c @@ -1,4 +1,23 @@ +/* + * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + */ + #include <linux/platform_device.h> +#include <linux/dma-mapping.h> #include <linux/gpio.h> #include <mach/mx25.h> #include <mach/irqs.h> diff --git a/arch/arm/mach-mx25/mx25pdk.c b/arch/arm/mach-mx25/mx25pdk.c index 92aa4fd..d23ae57 100644 --- a/arch/arm/mach-mx25/mx25pdk.c +++ b/arch/arm/mach-mx25/mx25pdk.c @@ -1,3 +1,21 @@ +/* + * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + */ + #include <linux/types.h> #include <linux/init.h> #include <linux/clk.h> @@ -23,19 +41,12 @@ static struct imxuart_platform_data uart_pdata = { .flags = IMXUART_HAVE_RTSCTS, }; -static struct mxc_nand_platform_data nand_board_info = { - .width = 1, - .hw_ecc = 1, -}; - static void __init mx25pdk_init(void) { mxc_register_device(&mxc_uart_device0, &uart_pdata); mxc_register_device(&mxc_usbh2, NULL); - mxc_register_device(&mxc_nand_device, &nand_board_info); } - static void __init mx25pdk_timer_init(void) { mx25_clocks_init(26000000); diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c index fe5c421..c595260 100644 --- a/arch/arm/mach-mx3/clock-imx35.c +++ b/arch/arm/mach-mx3/clock-imx35.c @@ -443,7 +443,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk) _REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk) _REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk) - _REGISTER_CLOCK("mxc_wdt.0", NULL, wdog_clk) + _REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk) _REGISTER_CLOCK(NULL, "max", max_clk) _REGISTER_CLOCK(NULL, "admux", admux_clk) _REGISTER_CLOCK(NULL, "csi", csi_clk) diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c index 06bd618..b2a3bcf 100644 --- a/arch/arm/mach-mx3/clock.c +++ b/arch/arm/mach-mx3/clock.c @@ -530,7 +530,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk) _REGISTER_CLOCK(NULL, "gpt", gpt_clk) _REGISTER_CLOCK(NULL, "pwm", pwm_clk) - _REGISTER_CLOCK(NULL, "wdog", wdog_clk) + _REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk) _REGISTER_CLOCK(NULL, "rtc", rtc_clk) _REGISTER_CLOCK(NULL, "epit", epit1_clk) _REGISTER_CLOCK(NULL, "epit", epit2_clk) diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c index 8a577f3..e6abe18 100644 --- a/arch/arm/mach-mx3/devices.c +++ b/arch/arm/mach-mx3/devices.c @@ -459,7 +459,7 @@ struct platform_device mxc_usbh2 = { * SPI master controller * 3 channels */ -static struct resource imx_spi_0_resources[] = { +static struct resource mxc_spi_0_resources[] = { { .start = CSPI1_BASE_ADDR, .end = CSPI1_BASE_ADDR + SZ_4K - 1, @@ -471,7 +471,7 @@ static struct resource imx_spi_0_resources[] = { }, }; -static struct resource imx_spi_1_resources[] = { +static struct resource mxc_spi_1_resources[] = { { .start = CSPI2_BASE_ADDR, .end = CSPI2_BASE_ADDR + SZ_4K - 1, @@ -483,7 +483,7 @@ static struct resource imx_spi_1_resources[] = { }, }; -static struct resource imx_spi_2_resources[] = { +static struct resource mxc_spi_2_resources[] = { { .start = CSPI3_BASE_ADDR, .end = CSPI3_BASE_ADDR + SZ_4K - 1, @@ -495,25 +495,25 @@ static struct resource imx_spi_2_resources[] = { }, }; -struct platform_device imx_spi_device0 = { +struct platform_device mxc_spi_device0 = { .name = "spi_imx", .id = 0, - .num_resources = ARRAY_SIZE(imx_spi_0_resources), - .resource = imx_spi_0_resources, + .num_resources = ARRAY_SIZE(mxc_spi_0_resources), + .resource = mxc_spi_0_resources, }; -struct platform_device imx_spi_device1 = { +struct platform_device mxc_spi_device1 = { .name = "spi_imx", .id = 1, - .num_resources = ARRAY_SIZE(imx_spi_1_resources), - .resource = imx_spi_1_resources, + .num_resources = ARRAY_SIZE(mxc_spi_1_resources), + .resource = mxc_spi_1_resources, }; -struct platform_device imx_spi_device2 = { +struct platform_device mxc_spi_device2 = { .name = "spi_imx", .id = 2, - .num_resources = ARRAY_SIZE(imx_spi_2_resources), - .resource = imx_spi_2_resources, + .num_resources = ARRAY_SIZE(mxc_spi_2_resources), + .resource = mxc_spi_2_resources, }; #ifdef CONFIG_ARCH_MX35 diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h index 79f2be4..ab87419 100644 --- a/arch/arm/mach-mx3/devices.h +++ b/arch/arm/mach-mx3/devices.h @@ -20,7 +20,7 @@ extern struct platform_device mxc_otg_host; extern struct platform_device mxc_usbh1; extern struct platform_device mxc_usbh2; extern struct platform_device mxc_rnga_device; -extern struct platform_device imx_spi_device0; -extern struct platform_device imx_spi_device1; -extern struct platform_device imx_spi_device2; +extern struct platform_device mxc_spi_device0; +extern struct platform_device mxc_spi_device1; +extern struct platform_device mxc_spi_device2; diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c index ad5a112..bedf5b8 100644 --- a/arch/arm/mach-mx3/mm.c +++ b/arch/arm/mach-mx3/mm.c @@ -81,6 +81,7 @@ void __init mx31_map_io(void) iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc)); } +#ifdef CONFIG_ARCH_MX35 void __init mx35_map_io(void) { mxc_set_cpu_type(MXC_CPU_MX35); @@ -89,6 +90,7 @@ void __init mx35_map_io(void) iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc)); } +#endif void __init mx31_init_irq(void) { diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 42920f9..8ad5cc3 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -219,6 +219,10 @@ static struct platform_device *ams_delta_devices[] __initdata = { static void __init ams_delta_init(void) { + /* mux pins for uarts */ + omap_cfg_reg(UART1_TX); + omap_cfg_reg(UART1_RTS); + iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc)); omap_board_config = ams_delta_config; @@ -231,6 +235,8 @@ static void __init ams_delta_init(void) omap_usb_init(&ams_delta_usb_config); platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices)); + + omap_writew(omap_readw(ARM_RSTCT1) | 0x0004, ARM_RSTCT1); } static struct plat_serial8250_port ams_delta_modem_ports[] = { diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c index fb47239..6c8a41f 100644 --- a/arch/arm/mach-omap1/board-generic.c +++ b/arch/arm/mach-omap1/board-generic.c @@ -64,6 +64,14 @@ static void __init omap_generic_init(void) { #ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap15xx()) { + /* mux pins for uarts */ + omap_cfg_reg(UART1_TX); + omap_cfg_reg(UART1_RTS); + omap_cfg_reg(UART2_TX); + omap_cfg_reg(UART2_RTS); + omap_cfg_reg(UART3_TX); + omap_cfg_reg(UART3_RX); + omap_usb_init(&generic1510_usb_config); } #endif diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index cc2abbb..cd6c395 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -376,6 +376,26 @@ static void __init innovator_init(void) { #ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { + unsigned char reg; + + /* mux pins for uarts */ + omap_cfg_reg(UART1_TX); + omap_cfg_reg(UART1_RTS); + omap_cfg_reg(UART2_TX); + omap_cfg_reg(UART2_RTS); + omap_cfg_reg(UART3_TX); + omap_cfg_reg(UART3_RX); + + reg = fpga_read(OMAP1510_FPGA_POWER); + reg |= OMAP1510_FPGA_PCR_COM1_EN; + fpga_write(reg, OMAP1510_FPGA_POWER); + udelay(10); + + reg = fpga_read(OMAP1510_FPGA_POWER); + reg |= OMAP1510_FPGA_PCR_COM2_EN; + fpga_write(reg, OMAP1510_FPGA_POWER); + udelay(10); + platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices)); spi_register_board_info(innovator1510_boardinfo, ARRAY_SIZE(innovator1510_boardinfo)); diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 90dd043..4de2584 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -342,6 +342,14 @@ static void __init palmte_misc_gpio_setup(void) static void __init omap_palmte_init(void) { + /* mux pins for uarts */ + omap_cfg_reg(UART1_TX); + omap_cfg_reg(UART1_RTS); + omap_cfg_reg(UART2_TX); + omap_cfg_reg(UART2_RTS); + omap_cfg_reg(UART3_TX); + omap_cfg_reg(UART3_RX); + omap_board_config = palmte_config; omap_board_config_size = ARRAY_SIZE(palmte_config); diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index 8256139..d972cf9 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -289,6 +289,14 @@ static void __init omap_mpu_wdt_mode(int mode) { static void __init omap_palmtt_init(void) { + /* mux pins for uarts */ + omap_cfg_reg(UART1_TX); + omap_cfg_reg(UART1_RTS); + omap_cfg_reg(UART2_TX); + omap_cfg_reg(UART2_RTS); + omap_cfg_reg(UART3_TX); + omap_cfg_reg(UART3_RX); + omap_mpu_wdt_mode(0); omap_board_config = palmtt_config; diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index 81b6bde..986bd4d 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -307,6 +307,14 @@ palmz71_gpio_setup(int early) static void __init omap_palmz71_init(void) { + /* mux pins for uarts */ + omap_cfg_reg(UART1_TX); + omap_cfg_reg(UART1_RTS); + omap_cfg_reg(UART2_TX); + omap_cfg_reg(UART2_RTS); + omap_cfg_reg(UART3_TX); + omap_cfg_reg(UART3_RX); + palmz71_gpio_setup(1); omap_mpu_wdt_mode(0); diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 02c85ca..056ae64 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -377,6 +377,14 @@ static struct omap_board_config_kernel sx1_config[] __initdata = { static void __init omap_sx1_init(void) { + /* mux pins for uarts */ + omap_cfg_reg(UART1_TX); + omap_cfg_reg(UART1_RTS); + omap_cfg_reg(UART2_TX); + omap_cfg_reg(UART2_RTS); + omap_cfg_reg(UART3_TX); + omap_cfg_reg(UART3_RX); + platform_add_devices(sx1_devices, ARRAY_SIZE(sx1_devices)); omap_board_config = sx1_config; diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index c06e7a5..07b0752 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -152,6 +152,14 @@ static void __init voiceblue_init_irq(void) static void __init voiceblue_init(void) { + /* mux pins for uarts */ + omap_cfg_reg(UART1_TX); + omap_cfg_reg(UART1_RTS); + omap_cfg_reg(UART2_TX); + omap_cfg_reg(UART2_RTS); + omap_cfg_reg(UART3_TX); + omap_cfg_reg(UART3_RX); + /* Watchdog */ gpio_request(0, "Watchdog"); /* smc91x reset */ diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index d496e50..d23979b 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -131,8 +131,6 @@ void __init omap_serial_init(void) } for (i = 0; i < OMAP_MAX_NR_PORTS; i++) { - unsigned char reg; - switch (i) { case 0: uart1_ck = clk_get(NULL, "uart1_ck"); @@ -143,16 +141,6 @@ void __init omap_serial_init(void) if (cpu_is_omap15xx()) clk_set_rate(uart1_ck, 12000000); } - if (cpu_is_omap15xx()) { - omap_cfg_reg(UART1_TX); - omap_cfg_reg(UART1_RTS); - if (machine_is_omap_innovator()) { - reg = fpga_read(OMAP1510_FPGA_POWER); - reg |= OMAP1510_FPGA_PCR_COM1_EN; - fpga_write(reg, OMAP1510_FPGA_POWER); - udelay(10); - } - } break; case 1: uart2_ck = clk_get(NULL, "uart2_ck"); @@ -165,16 +153,6 @@ void __init omap_serial_init(void) else clk_set_rate(uart2_ck, 48000000); } - if (cpu_is_omap15xx()) { - omap_cfg_reg(UART2_TX); - omap_cfg_reg(UART2_RTS); - if (machine_is_omap_innovator()) { - reg = fpga_read(OMAP1510_FPGA_POWER); - reg |= OMAP1510_FPGA_PCR_COM2_EN; - fpga_write(reg, OMAP1510_FPGA_POWER); - udelay(10); - } - } break; case 2: uart3_ck = clk_get(NULL, "uart3_ck"); @@ -185,10 +163,6 @@ void __init omap_serial_init(void) if (cpu_is_omap15xx()) clk_set_rate(uart3_ck, 12000000); } - if (cpu_is_omap15xx()) { - omap_cfg_reg(UART3_TX); - omap_cfg_reg(UART3_RX); - } break; } omap_serial_reset(&serial_platform_data[i]); diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 75b1c7e..aad194f 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -73,9 +73,21 @@ config MACH_OMAP_3430SDP bool "OMAP 3430 SDP board" depends on ARCH_OMAP3 && ARCH_OMAP34XX +config MACH_NOKIA_N800 + bool + +config MACH_NOKIA_N810 + bool + +config MACH_NOKIA_N810_WIMAX + bool + config MACH_NOKIA_N8X0 bool "Nokia N800/N810" depends on ARCH_OMAP2420 + select MACH_NOKIA_N800 + select MACH_NOKIA_N810 + select MACH_NOKIA_N810_WIMAX config MACH_NOKIA_RX51 bool "Nokia RX-51 board" diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index efaf053..0acb556 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -17,6 +17,7 @@ #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/input.h> +#include <linux/input/matrix_keypad.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> #include <linux/i2c/twl4030.h> @@ -38,7 +39,6 @@ #include <mach/gpmc.h> #include <mach/control.h> -#include <mach/keypad.h> #include <mach/gpmc-smc91x.h> #include "sdram-qimonda-hyb18m512160af-6.h" diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index eb37c40..609a5a4 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -58,6 +58,8 @@ static void __init gic_init_irq(void) static void __init omap_4430sdp_init_irq(void) { + omap_board_config = sdp4430_config; + omap_board_config_size = ARRAY_SIZE(sdp4430_config); omap2_init_common_hw(NULL, NULL); #ifdef CONFIG_OMAP_32K_TIMER omap2_gp_clockevent_set_gptimer(1); @@ -70,8 +72,6 @@ static void __init omap_4430sdp_init_irq(void) static void __init omap_4430sdp_init(void) { platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices)); - omap_board_config = sdp4430_config; - omap_board_config_size = ARRAY_SIZE(sdp4430_config); omap_serial_init(); } diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index d110a7f..d57ec2f 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -16,6 +16,7 @@ #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/input.h> +#include <linux/input/matrix_keypad.h> #include <linux/gpio_keys.h> #include <linux/workqueue.h> #include <linux/err.h> @@ -41,7 +42,6 @@ #include <asm/delay.h> #include <mach/control.h> #include <mach/usb.h> -#include <mach/keypad.h> #include "mmc-twl4030.h" diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index e4ec0c5..4c4d7f8d 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -20,6 +20,7 @@ #include <linux/clk.h> #include <linux/gpio.h> #include <linux/input.h> +#include <linux/input/matrix_keypad.h> #include <linux/leds.h> #include <linux/spi/spi.h> @@ -37,7 +38,6 @@ #include <mach/usb.h> #include <mach/common.h> #include <mach/mcspi.h> -#include <mach/keypad.h> #include "sdram-micron-mt46h32m32lf-6.h" #include "mmc-twl4030.h" diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 7f6bf87..5326e0d 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -27,6 +27,7 @@ #include <linux/i2c/twl4030.h> #include <linux/leds.h> #include <linux/input.h> +#include <linux/input/matrix_keypad.h> #include <linux/gpio_keys.h> #include <asm/mach-types.h> @@ -39,7 +40,6 @@ #include <mach/hardware.h> #include <mach/mcspi.h> #include <mach/usb.h> -#include <mach/keypad.h> #include <mach/mux.h> #include "sdram-micron-mt46h32m32lf-6.h" diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 2b0eb1b..e34d96a 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -12,6 +12,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/input.h> +#include <linux/input/matrix_keypad.h> #include <linux/spi/spi.h> #include <linux/i2c.h> #include <linux/i2c/twl4030.h> @@ -27,7 +28,6 @@ #include <mach/common.h> #include <mach/dma.h> #include <mach/gpmc.h> -#include <mach/keypad.h> #include <mach/onenand.h> #include <mach/gpmc-smc91x.h> diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index f9196c3..78869a9 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -26,7 +26,6 @@ #include <mach/mux.h> #include <mach/board.h> #include <mach/common.h> -#include <mach/keypad.h> #include <mach/dma.h> #include <mach/gpmc.h> #include <mach/usb.h> diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c index fd3369d..ea00486 100644 --- a/arch/arm/mach-omap2/board-zoom2.c +++ b/arch/arm/mach-omap2/board-zoom2.c @@ -13,6 +13,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/input.h> +#include <linux/input/matrix_keypad.h> #include <linux/gpio.h> #include <linux/i2c/twl4030.h> #include <linux/regulator/machine.h> @@ -22,7 +23,6 @@ #include <mach/common.h> #include <mach/usb.h> -#include <mach/keypad.h> #include "mmc-twl4030.h" #include "sdram-micron-mt46h32m32lf-6.h" diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index e3a3bad..56be87d 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -302,7 +302,9 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0, pwrdm_init(powerdomains_omap); clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps); omap2_clk_init(); +#endif omap_serial_early_init(); +#ifndef CONFIG_ARCH_OMAP4 omap_hwmod_late_init(); omap_pm_if_init(); omap2_sdrc_init(sdrc_cs0, sdrc_cs1); diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 378c2f6..8946319 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -639,14 +639,15 @@ static void __init prcm_setup_regs(void) prm_write_mod_reg(OMAP3430_IO_EN | OMAP3430_WKUP_EN, OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET); - /* Enable GPIO wakeups in PER */ + /* Enable wakeups in PER */ prm_write_mod_reg(OMAP3430_EN_GPIO2 | OMAP3430_EN_GPIO3 | OMAP3430_EN_GPIO4 | OMAP3430_EN_GPIO5 | - OMAP3430_EN_GPIO6, OMAP3430_PER_MOD, PM_WKEN); + OMAP3430_EN_GPIO6 | OMAP3430_EN_UART3, + OMAP3430_PER_MOD, PM_WKEN); /* and allow them to wake up MPU */ prm_write_mod_reg(OMAP3430_GRPSEL_GPIO2 | OMAP3430_EN_GPIO3 | OMAP3430_GRPSEL_GPIO4 | OMAP3430_EN_GPIO5 | - OMAP3430_GRPSEL_GPIO6, + OMAP3430_GRPSEL_GPIO6 | OMAP3430_EN_UART3, OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL); /* Don't attach IVA interrupts */ diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index ae21868..54dfeb5 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -109,16 +109,6 @@ static struct plat_serial8250_port serial_platform_data2[] = { .regshift = 2, .uartclk = OMAP24XX_BASE_BAUD * 16, }, { -#ifdef CONFIG_ARCH_OMAP4 - .membase = OMAP2_IO_ADDRESS(OMAP_UART4_BASE), - .mapbase = OMAP_UART4_BASE, - .irq = 70, - .flags = UPF_BOOT_AUTOCONF, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = OMAP24XX_BASE_BAUD * 16, - }, { -#endif .flags = 0 } }; diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index aac2cda..102916f 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -43,10 +43,10 @@ #define CM_X300_ETH_PHYS 0x08000010 -#define GPIO82_MMC2_IRQ (82) -#define GPIO85_MMC2_WP (85) +#define GPIO82_MMC_IRQ (82) +#define GPIO85_MMC_WP (85) -#define CM_X300_MMC2_IRQ IRQ_GPIO(GPIO82_MMC2_IRQ) +#define CM_X300_MMC_IRQ IRQ_GPIO(GPIO82_MMC_IRQ) #define GPIO95_RTC_CS (95) #define GPIO96_RTC_WR (96) @@ -292,37 +292,37 @@ static inline void cm_x300_init_nand(void) {} #endif #if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE) -/* The first MMC slot of CM-X300 is hardwired to Libertas card and has +static struct pxamci_platform_data cm_x300_mci_platform_data = { + .detect_delay = 20, + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .gpio_card_detect = GPIO82_MMC_IRQ, + .gpio_card_ro = GPIO85_MMC_WP, + .gpio_power = -1, +}; + +/* The second MMC slot of CM-X300 is hardwired to Libertas card and has no detection/ro pins */ -static int cm_x300_mci_init(struct device *dev, - irq_handler_t cm_x300_detect_int, - void *data) +static int cm_x300_mci2_init(struct device *dev, + irq_handler_t cm_x300_detect_int, + void *data) { return 0; } -static void cm_x300_mci_exit(struct device *dev, void *data) +static void cm_x300_mci2_exit(struct device *dev, void *data) { } -static struct pxamci_platform_data cm_x300_mci_platform_data = { +static struct pxamci_platform_data cm_x300_mci2_platform_data = { .detect_delay = 20, .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .init = cm_x300_mci_init, - .exit = cm_x300_mci_exit, + .init = cm_x300_mci2_init, + .exit = cm_x300_mci2_exit, .gpio_card_detect = -1, .gpio_card_ro = -1, .gpio_power = -1, }; -static struct pxamci_platform_data cm_x300_mci2_platform_data = { - .detect_delay = 20, - .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .gpio_card_detect = GPIO82_MMC2_IRQ, - .gpio_card_ro = GPIO85_MMC2_WP, - .gpio_power = -1, -}; - static void __init cm_x300_init_mmc(void) { pxa_set_mci_info(&cm_x300_mci_platform_data); diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index ee8d603..82ff573 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -15,6 +15,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/delay.h> +#include <linux/gpio_keys.h> #include <linux/gpio.h> #include <linux/leds.h> #include <linux/mtd/physmap.h> @@ -375,6 +376,43 @@ static struct platform_device spitzkbd_device = { }; +static struct gpio_keys_button spitz_gpio_keys[] = { + { + .type = EV_PWR, + .code = KEY_SUSPEND, + .gpio = SPITZ_GPIO_ON_KEY, + .desc = "On/Off", + .wakeup = 1, + }, + /* Two buttons detecting the lid state */ + { + .type = EV_SW, + .code = 0, + .gpio = SPITZ_GPIO_SWA, + .desc = "Display Down", + }, + { + .type = EV_SW, + .code = 1, + .gpio = SPITZ_GPIO_SWB, + .desc = "Lid Closed", + }, +}; + +static struct gpio_keys_platform_data spitz_gpio_keys_platform_data = { + .buttons = spitz_gpio_keys, + .nbuttons = ARRAY_SIZE(spitz_gpio_keys), +}; + +static struct platform_device spitz_gpio_keys_device = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &spitz_gpio_keys_platform_data, + }, +}; + + /* * Spitz LEDs */ @@ -689,6 +727,7 @@ static struct platform_device sharpsl_rom_device = { static struct platform_device *devices[] __initdata = { &spitzscoop_device, &spitzkbd_device, + &spitz_gpio_keys_device, &spitzled_device, &sharpsl_nand_device, &sharpsl_rom_device, diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index e993140..9264d81 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -122,10 +122,7 @@ config CPU_ARM920T select CPU_TLB_V4WBI if MMU help The ARM920T is licensed to be produced by numerous vendors, - and is used in the Maverick EP9312 and the Samsung S3C2410. - - More information on the Maverick EP9312 at - <http://linuxdevices.com/products/PD2382866068.html>. + and is used in the Cirrus EP93xx and the Samsung S3C2410. Say Y if you want support for the ARM920T processor. Otherwise, say N. diff --git a/arch/arm/oprofile/op_model_v6.c b/arch/arm/oprofile/op_model_v6.c index fe58138..f7d2ec5 100644 --- a/arch/arm/oprofile/op_model_v6.c +++ b/arch/arm/oprofile/op_model_v6.c @@ -33,6 +33,9 @@ static int irqs[] = { #ifdef CONFIG_ARCH_OMAP2 3, #endif +#ifdef CONFIG_ARCH_BCMRING + IRQ_PMUIRQ, /* for BCMRING, ARM PMU interrupt is 43 */ +#endif }; static void armv6_pmu_stop(void) diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 0eb676d..b53125f 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -978,6 +978,14 @@ void omap_stop_dma(int lch) { u32 l; + /* Disable all interrupts on the channel */ + if (cpu_class_is_omap1()) + dma_write(0, CICR(lch)); + + l = dma_read(CCR(lch)); + l &= ~OMAP_DMA_CCR_EN; + dma_write(l, CCR(lch)); + if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) { int next_lch, cur_lch = lch; char dma_chan_link_map[OMAP_DMA4_LOGICAL_DMA_CH_COUNT]; @@ -995,18 +1003,8 @@ void omap_stop_dma(int lch) next_lch = dma_chan[cur_lch].next_lch; cur_lch = next_lch; } while (next_lch != -1); - - return; } - /* Disable all interrupts on the channel */ - if (cpu_class_is_omap1()) - dma_write(0, CICR(lch)); - - l = dma_read(CCR(lch)); - l &= ~OMAP_DMA_CCR_EN; - dma_write(l, CCR(lch)); - dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE; } EXPORT_SYMBOL(omap_stop_dma); diff --git a/arch/arm/plat-omap/include/mach/keypad.h b/arch/arm/plat-omap/include/mach/keypad.h index d91b9be..3ae52cc 100644 --- a/arch/arm/plat-omap/include/mach/keypad.h +++ b/arch/arm/plat-omap/include/mach/keypad.h @@ -10,7 +10,7 @@ #ifndef ASMARM_ARCH_KEYPAD_H #define ASMARM_ARCH_KEYPAD_H -#include <linux/input/matrix_keypad.h> +#warning: Please update the board to use matrix_keypad.h instead struct omap_kp_platform_data { int rows; @@ -37,6 +37,9 @@ struct omap_kp_platform_data { #define KEY_PERSISTENT 0x00800000 #define KEYNUM_MASK 0x00EFFFFF +#define KEY(col, row, val) (((col) << 28) | ((row) << 24) | (val)) +#define PERSISTENT_KEY(col, row) (((col) << 28) | ((row) << 24) | \ + KEY_PERSISTENT) #endif diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c index 4b60127..94584f1 100644 --- a/arch/arm/plat-omap/iommu.c +++ b/arch/arm/plat-omap/iommu.c @@ -664,7 +664,7 @@ static size_t iopgtable_clear_entry_core(struct iommu *obj, u32 da) nent = 1; /* for the next L1 entry */ } else { bytes = IOPGD_SIZE; - if (*iopgd & IOPGD_SUPER) { + if ((*iopgd & IOPGD_SUPER) == IOPGD_SUPER) { nent *= 16; /* rewind to the 1st entry */ iopgd = (u32 *)((u32)iopgd & IOSUPER_MASK); diff --git a/arch/frv/kernel/signal.c b/arch/frv/kernel/signal.c index 6b0a2b6..0974c0e 100644 --- a/arch/frv/kernel/signal.c +++ b/arch/frv/kernel/signal.c @@ -527,7 +527,7 @@ static void do_signal(void) no_signal: /* Did we come from a system call? */ - if (__frame->syscallno >= 0) { + if (__frame->syscallno != -1) { /* Restart the system call - no handlers present */ switch (__frame->gr8) { case -ERESTARTNOHAND: diff --git a/arch/x86/boot/setup.ld b/arch/x86/boot/setup.ld index 0f6ec455..03c0683 100644 --- a/arch/x86/boot/setup.ld +++ b/arch/x86/boot/setup.ld @@ -53,6 +53,9 @@ SECTIONS /DISCARD/ : { *(.note*) } + /* + * The ASSERT() sink to . is intentional, for binutils 2.14 compatibility: + */ . = ASSERT(_end <= 0x8000, "Setup too big!"); . = ASSERT(hdr == 0x1f1, "The setup header has the wrong offset!"); /* Necessary for the very-old-loader check to work... */ diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h index 25a9284..d823c24 100644 --- a/arch/x86/include/asm/topology.h +++ b/arch/x86/include/asm/topology.h @@ -143,6 +143,7 @@ extern unsigned long node_remap_size[]; | 1*SD_BALANCE_FORK \ | 0*SD_BALANCE_WAKE \ | 1*SD_WAKE_AFFINE \ + | 1*SD_PREFER_LOCAL \ | 0*SD_SHARE_CPUPOWER \ | 0*SD_POWERSAVINGS_BALANCE \ | 0*SD_SHARE_PKG_RESOURCES \ diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h index 04eb6c9..d1414af 100644 --- a/arch/x86/include/asm/uv/uv_hub.h +++ b/arch/x86/include/asm/uv/uv_hub.h @@ -19,6 +19,8 @@ #include <asm/types.h> #include <asm/percpu.h> #include <asm/uv/uv_mmrs.h> +#include <asm/irq_vectors.h> +#include <asm/io_apic.h> /* @@ -114,7 +116,7 @@ /* * The largest possible NASID of a C or M brick (+ 2) */ -#define UV_MAX_NASID_VALUE (UV_MAX_NUMALINK_NODES * 2) +#define UV_MAX_NASID_VALUE (UV_MAX_NUMALINK_BLADES * 2) struct uv_scir_s { struct timer_list timer; @@ -230,6 +232,20 @@ static inline unsigned long uv_gpa(void *v) return uv_soc_phys_ram_to_gpa(__pa(v)); } +/* gnode -> pnode */ +static inline unsigned long uv_gpa_to_gnode(unsigned long gpa) +{ + return gpa >> uv_hub_info->m_val; +} + +/* gpa -> pnode */ +static inline int uv_gpa_to_pnode(unsigned long gpa) +{ + unsigned long n_mask = (1UL << uv_hub_info->n_val) - 1; + + return uv_gpa_to_gnode(gpa) & n_mask; +} + /* pnode, offset --> socket virtual */ static inline void *uv_pnode_offset_to_vaddr(int pnode, unsigned long offset) { @@ -421,9 +437,14 @@ static inline void uv_set_cpu_scir_bits(int cpu, unsigned char value) static inline void uv_hub_send_ipi(int pnode, int apicid, int vector) { unsigned long val; + unsigned long dmode = dest_Fixed; + + if (vector == NMI_VECTOR) + dmode = dest_NMI; val = (1UL << UVH_IPI_INT_SEND_SHFT) | ((apicid) << UVH_IPI_INT_APIC_ID_SHFT) | + (dmode << UVH_IPI_INT_DELIVERY_MODE_SHFT) | (vector << UVH_IPI_INT_VECTOR_SHFT); uv_write_global_mmr64(pnode, UVH_IPI_INT, val); } diff --git a/arch/x86/kernel/acpi/realmode/wakeup.lds.S b/arch/x86/kernel/acpi/realmode/wakeup.lds.S index 7da00b7..060fff8 100644 --- a/arch/x86/kernel/acpi/realmode/wakeup.lds.S +++ b/arch/x86/kernel/acpi/realmode/wakeup.lds.S @@ -57,5 +57,8 @@ SECTIONS *(.note*) } + /* + * The ASSERT() sink to . is intentional, for binutils 2.14 compatibility: + */ . = ASSERT(_end <= WAKEUP_SIZE, "Wakeup too big!"); } diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index f5f5886..326c254 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -352,14 +352,14 @@ static __init void get_lowmem_redirect(unsigned long *base, unsigned long *size) for (i = 0; i < ARRAY_SIZE(redir_addrs); i++) { alias.v = uv_read_local_mmr(redir_addrs[i].alias); - if (alias.s.base == 0) { + if (alias.s.enable && alias.s.base == 0) { *size = (1UL << alias.s.m_alias); redirect.v = uv_read_local_mmr(redir_addrs[i].redirect); *base = (unsigned long)redirect.s.dest_base << DEST_SHIFT; return; } } - BUG(); + *base = *size = 0; } enum map_type {map_wb, map_uc}; @@ -619,12 +619,12 @@ void __init uv_system_init(void) uv_cpu_hub_info(cpu)->lowmem_remap_base = lowmem_redir_base; uv_cpu_hub_info(cpu)->lowmem_remap_top = lowmem_redir_size; uv_cpu_hub_info(cpu)->m_val = m_val; - uv_cpu_hub_info(cpu)->n_val = m_val; + uv_cpu_hub_info(cpu)->n_val = n_val; uv_cpu_hub_info(cpu)->numa_blade_id = blade; uv_cpu_hub_info(cpu)->blade_processor_id = lcpu; uv_cpu_hub_info(cpu)->pnode = pnode; uv_cpu_hub_info(cpu)->pnode_mask = pnode_mask; - uv_cpu_hub_info(cpu)->gpa_mask = (1 << (m_val + n_val)) - 1; + uv_cpu_hub_info(cpu)->gpa_mask = (1UL << (m_val + n_val)) - 1; uv_cpu_hub_info(cpu)->gnode_upper = gnode_upper; uv_cpu_hub_info(cpu)->gnode_extra = gnode_extra; uv_cpu_hub_info(cpu)->global_mmr_base = mmr_base; diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index b1598a9..721a77c 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -1214,7 +1214,8 @@ static int __cpuinit mce_cap_init(void) rdmsrl(MSR_IA32_MCG_CAP, cap); b = cap & MCG_BANKCNT_MASK; - printk(KERN_INFO "mce: CPU supports %d MCE banks\n", b); + if (!banks) + printk(KERN_INFO "mce: CPU supports %d MCE banks\n", b); if (b > MAX_NR_BANKS) { printk(KERN_WARNING diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c index 503c1f2..1740c85 100644 --- a/arch/x86/kernel/tlb_uv.c +++ b/arch/x86/kernel/tlb_uv.c @@ -23,8 +23,6 @@ static struct bau_control **uv_bau_table_bases __read_mostly; static int uv_bau_retry_limit __read_mostly; -/* position of pnode (which is nasid>>1): */ -static int uv_nshift __read_mostly; /* base pnode in this partition */ static int uv_partition_base_pnode __read_mostly; @@ -723,7 +721,7 @@ uv_activation_descriptor_init(int node, int pnode) BUG_ON(!adp); pa = uv_gpa(adp); /* need the real nasid*/ - n = pa >> uv_nshift; + n = uv_gpa_to_pnode(pa); m = pa & uv_mmask; uv_write_global_mmr64(pnode, UVH_LB_BAU_SB_DESCRIPTOR_BASE, @@ -778,7 +776,7 @@ uv_payload_queue_init(int node, int pnode, struct bau_control *bau_tablesp) * need the pnode of where the memory was really allocated */ pa = uv_gpa(pqp); - pn = pa >> uv_nshift; + pn = uv_gpa_to_pnode(pa); uv_write_global_mmr64(pnode, UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST, ((unsigned long)pn << UV_PAYLOADQ_PNODE_SHIFT) | @@ -843,8 +841,7 @@ static int __init uv_bau_init(void) GFP_KERNEL, cpu_to_node(cur_cpu)); uv_bau_retry_limit = 1; - uv_nshift = uv_hub_info->n_val; - uv_mmask = (1UL << uv_hub_info->n_val) - 1; + uv_mmask = (1UL << uv_hub_info->m_val) - 1; nblades = uv_num_possible_blades(); uv_bau_table_bases = (struct bau_control **) diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S index 92929fb..3c68fe2 100644 --- a/arch/x86/kernel/vmlinux.lds.S +++ b/arch/x86/kernel/vmlinux.lds.S @@ -305,6 +305,9 @@ SECTIONS #ifdef CONFIG_X86_32 +/* + * The ASSERT() sink to . is intentional, for binutils 2.14 compatibility: + */ . = ASSERT((_end - LOAD_OFFSET <= KERNEL_IMAGE_SIZE), "kernel image bigger than KERNEL_IMAGE_SIZE"); #else diff --git a/drivers/block/loop.c b/drivers/block/loop.c index edda9ea..bd112c8 100644 --- a/drivers/block/loop.c +++ b/drivers/block/loop.c @@ -949,7 +949,7 @@ static int loop_clr_fd(struct loop_device *lo, struct block_device *bdev) lo->lo_state = Lo_unbound; /* This is safe: open() is still holding a reference. */ module_put(THIS_MODULE); - if (max_part > 0) + if (max_part > 0 && bdev) ioctl_by_bdev(bdev, BLKRRPART, 0); mutex_unlock(&lo->lo_ctl_mutex); /* diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c index ad41f19..12fdd39 100644 --- a/drivers/cpuidle/cpuidle.c +++ b/drivers/cpuidle/cpuidle.c @@ -76,8 +76,11 @@ static void cpuidle_idle_call(void) #endif /* ask the governor for the next state */ next_state = cpuidle_curr_governor->select(dev); - if (need_resched()) + if (need_resched()) { + local_irq_enable(); return; + } + target_state = &dev->states[next_state]; /* enter the state and update stats */ diff --git a/drivers/edac/i5000_edac.c b/drivers/edac/i5000_edac.c index d335086f..77a9579 100644 --- a/drivers/edac/i5000_edac.c +++ b/drivers/edac/i5000_edac.c @@ -1173,7 +1173,7 @@ static void i5000_get_mc_regs(struct mem_ctl_info *mci) pci_read_config_word(pvt->branch_1, where, &pvt->b1_mtr[slot_row]); debugf2("MTR%d where=0x%x B1 value=0x%x\n", slot_row, - where, pvt->b0_mtr[slot_row]); + where, pvt->b1_mtr[slot_row]); } else { pvt->b1_mtr[slot_row] = 0; } @@ -1232,7 +1232,7 @@ static int i5000_init_csrows(struct mem_ctl_info *mci) struct csrow_info *p_csrow; int empty, channel_count; int max_csrows; - int mtr; + int mtr, mtr1; int csrow_megs; int channel; int csrow; @@ -1251,9 +1251,10 @@ static int i5000_init_csrows(struct mem_ctl_info *mci) /* use branch 0 for the basis */ mtr = pvt->b0_mtr[csrow >> 1]; + mtr1 = pvt->b1_mtr[csrow >> 1]; /* if no DIMMS on this row, continue */ - if (!MTR_DIMMS_PRESENT(mtr)) + if (!MTR_DIMMS_PRESENT(mtr) && !MTR_DIMMS_PRESENT(mtr1)) continue; /* FAKE OUT VALUES, FIXME */ diff --git a/drivers/edac/i5400_edac.c b/drivers/edac/i5400_edac.c index b08b6d8..f99d106 100644 --- a/drivers/edac/i5400_edac.c +++ b/drivers/edac/i5400_edac.c @@ -46,9 +46,10 @@ /* Limits for i5400 */ #define NUM_MTRS_PER_BRANCH 4 #define CHANNELS_PER_BRANCH 2 +#define MAX_DIMMS_PER_CHANNEL NUM_MTRS_PER_BRANCH #define MAX_CHANNELS 4 -#define MAX_DIMMS (MAX_CHANNELS * 4) /* Up to 4 DIMM's per channel */ -#define MAX_CSROWS (MAX_DIMMS * 2) /* max possible csrows per channel */ +/* max possible csrows per channel */ +#define MAX_CSROWS (MAX_DIMMS_PER_CHANNEL) /* Device 16, * Function 0: System Address @@ -331,7 +332,6 @@ static const struct i5400_dev_info i5400_devs[] = { struct i5400_dimm_info { int megabytes; /* size, 0 means not present */ - int dual_rank; }; /* driver private data structure */ @@ -849,11 +849,9 @@ static int determine_mtr(struct i5400_pvt *pvt, int csrow, int channel) int n; /* There is one MTR for each slot pair of FB-DIMMs, - Each slot may have one or two ranks (2 csrows), Each slot pair may be at branch 0 or branch 1. - So, csrow should be divided by eight */ - n = csrow >> 3; + n = csrow; if (n >= NUM_MTRS_PER_BRANCH) { debugf0("ERROR: trying to access an invalid csrow: %d\n", @@ -905,25 +903,22 @@ static void handle_channel(struct i5400_pvt *pvt, int csrow, int channel, amb_present_reg = determine_amb_present_reg(pvt, channel); /* Determine if there is a DIMM present in this DIMM slot */ - if (amb_present_reg & (1 << (csrow >> 1))) { - dinfo->dual_rank = MTR_DIMM_RANK(mtr); - - if (!((dinfo->dual_rank == 0) && - ((csrow & 0x1) == 0x1))) { - /* Start with the number of bits for a Bank - * on the DRAM */ - addrBits = MTR_DRAM_BANKS_ADDR_BITS(mtr); - /* Add thenumber of ROW bits */ - addrBits += MTR_DIMM_ROWS_ADDR_BITS(mtr); - /* add the number of COLUMN bits */ - addrBits += MTR_DIMM_COLS_ADDR_BITS(mtr); - - addrBits += 6; /* add 64 bits per DIMM */ - addrBits -= 20; /* divide by 2^^20 */ - addrBits -= 3; /* 8 bits per bytes */ - - dinfo->megabytes = 1 << addrBits; - } + if (amb_present_reg & (1 << csrow)) { + /* Start with the number of bits for a Bank + * on the DRAM */ + addrBits = MTR_DRAM_BANKS_ADDR_BITS(mtr); + /* Add thenumber of ROW bits */ + addrBits += MTR_DIMM_ROWS_ADDR_BITS(mtr); + /* add the number of COLUMN bits */ + addrBits += MTR_DIMM_COLS_ADDR_BITS(mtr); + /* add the number of RANK bits */ + addrBits += MTR_DIMM_RANK(mtr); + + addrBits += 6; /* add 64 bits per DIMM */ + addrBits -= 20; /* divide by 2^^20 */ + addrBits -= 3; /* 8 bits per bytes */ + + dinfo->megabytes = 1 << addrBits; } } } @@ -951,12 +946,12 @@ static void calculate_dimm_size(struct i5400_pvt *pvt) return; } - /* Scan all the actual CSROWS (which is # of DIMMS * 2) + /* Scan all the actual CSROWS * and calculate the information for each DIMM * Start with the highest csrow first, to display it first * and work toward the 0th csrow */ - max_csrows = pvt->maxdimmperch * 2; + max_csrows = pvt->maxdimmperch; for (csrow = max_csrows - 1; csrow >= 0; csrow--) { /* on an odd csrow, first output a 'boundary' marker, @@ -1064,7 +1059,7 @@ static void i5400_get_mc_regs(struct mem_ctl_info *mci) /* Get the set of MTR[0-3] regs by each branch */ for (slot_row = 0; slot_row < NUM_MTRS_PER_BRANCH; slot_row++) { - int where = MTR0 + (slot_row * sizeof(u32)); + int where = MTR0 + (slot_row * sizeof(u16)); /* Branch 0 set of MTR registers */ pci_read_config_word(pvt->branch_0, where, @@ -1146,7 +1141,7 @@ static int i5400_init_csrows(struct mem_ctl_info *mci) pvt = mci->pvt_info; channel_count = pvt->maxch; - max_csrows = pvt->maxdimmperch * 2; + max_csrows = pvt->maxdimmperch; empty = 1; /* Assume NO memory */ @@ -1215,28 +1210,6 @@ static void i5400_enable_error_reporting(struct mem_ctl_info *mci) } /* - * i5400_get_dimm_and_channel_counts(pdev, &num_csrows, &num_channels) - * - * ask the device how many channels are present and how many CSROWS - * as well - */ -static void i5400_get_dimm_and_channel_counts(struct pci_dev *pdev, - int *num_dimms_per_channel, - int *num_channels) -{ - u8 value; - - /* Need to retrieve just how many channels and dimms per channel are - * supported on this memory controller - */ - pci_read_config_byte(pdev, MAXDIMMPERCH, &value); - *num_dimms_per_channel = (int)value * 2; - - pci_read_config_byte(pdev, MAXCH, &value); - *num_channels = (int)value; -} - -/* * i5400_probe1 Probe for ONE instance of device to see if it is * present. * return: @@ -1263,22 +1236,16 @@ static int i5400_probe1(struct pci_dev *pdev, int dev_idx) if (PCI_FUNC(pdev->devfn) != 0) return -ENODEV; - /* Ask the devices for the number of CSROWS and CHANNELS so - * that we can calculate the memory resources, etc - * - * The Chipset will report what it can handle which will be greater - * or equal to what the motherboard manufacturer will implement. - * - * As we don't have a motherboard identification routine to determine + /* As we don't have a motherboard identification routine to determine * actual number of slots/dimms per channel, we thus utilize the * resource as specified by the chipset. Thus, we might have * have more DIMMs per channel than actually on the mobo, but this * allows the driver to support upto the chipset max, without * some fancy mobo determination. */ - i5400_get_dimm_and_channel_counts(pdev, &num_dimms_per_channel, - &num_channels); - num_csrows = num_dimms_per_channel * 2; + num_dimms_per_channel = MAX_DIMMS_PER_CHANNEL; + num_channels = MAX_CHANNELS; + num_csrows = num_dimms_per_channel; debugf0("MC: %s(): Number of - Channels= %d DIMMS= %d CSROWS= %d\n", __func__, num_channels, num_dimms_per_channel, num_csrows); diff --git a/drivers/edac/mpc85xx_edac.c b/drivers/edac/mpc85xx_edac.c index 157f650..cf27402 100644 --- a/drivers/edac/mpc85xx_edac.c +++ b/drivers/edac/mpc85xx_edac.c @@ -26,7 +26,9 @@ #include "mpc85xx_edac.h" static int edac_dev_idx; +#ifdef CONFIG_PCI static int edac_pci_idx; +#endif static int edac_mc_idx; static u32 orig_ddr_err_disable; diff --git a/drivers/gpio/twl4030-gpio.c b/drivers/gpio/twl4030-gpio.c index afad147..49384a7 100644 --- a/drivers/gpio/twl4030-gpio.c +++ b/drivers/gpio/twl4030-gpio.c @@ -460,7 +460,8 @@ no_irqs: return ret; } -static int __devexit gpio_twl4030_remove(struct platform_device *pdev) +/* Cannot use __devexit as gpio_twl4030_probe() calls us */ +static int gpio_twl4030_remove(struct platform_device *pdev) { struct twl4030_gpio_platform_data *pdata = pdev->dev.platform_data; int status; @@ -493,7 +494,7 @@ static struct platform_driver gpio_twl4030_driver = { .driver.name = "twl4030_gpio", .driver.owner = THIS_MODULE, .probe = gpio_twl4030_probe, - .remove = __devexit_p(gpio_twl4030_remove), + .remove = gpio_twl4030_remove, }; static int __init gpio_twl4030_init(void) diff --git a/drivers/hwmon/dme1737.c b/drivers/hwmon/dme1737.c index 2c2cb1ec..27d6257 100644 --- a/drivers/hwmon/dme1737.c +++ b/drivers/hwmon/dme1737.c @@ -572,7 +572,7 @@ static struct dme1737_data *dme1737_update_device(struct device *dev) /* Sample register contents every 1 sec */ if (time_after(jiffies, data->last_update + HZ) || !data->valid) { - if (data->type != sch5027) { + if (data->type == dme1737) { data->vid = dme1737_read(data, DME1737_REG_VID) & 0x3f; } @@ -1621,9 +1621,6 @@ static struct attribute *dme1737_misc_attr[] = { &sensor_dev_attr_zone1_auto_point1_temp_hyst.dev_attr.attr, &sensor_dev_attr_zone2_auto_point1_temp_hyst.dev_attr.attr, &sensor_dev_attr_zone3_auto_point1_temp_hyst.dev_attr.attr, - /* Misc */ - &dev_attr_vrm.attr, - &dev_attr_cpu0_vid.attr, NULL }; @@ -1631,6 +1628,18 @@ static const struct attribute_group dme1737_misc_group = { .attrs = dme1737_misc_attr, }; +/* The following struct holds VID-related attributes. Their creation + depends on the chip type which is determined during module load. */ +static struct attribute *dme1737_vid_attr[] = { + &dev_attr_vrm.attr, + &dev_attr_cpu0_vid.attr, + NULL +}; + +static const struct attribute_group dme1737_vid_group = { + .attrs = dme1737_vid_attr, +}; + /* The following structs hold the PWM attributes, some of which are optional. * Their creation depends on the chip configuration which is determined during * module load. */ @@ -1902,6 +1911,9 @@ static void dme1737_remove_files(struct device *dev) if (data->type != sch5027) { sysfs_remove_group(&dev->kobj, &dme1737_misc_group); } + if (data->type == dme1737) { + sysfs_remove_group(&dev->kobj, &dme1737_vid_group); + } sysfs_remove_group(&dev->kobj, &dme1737_group); @@ -1933,6 +1945,13 @@ static int dme1737_create_files(struct device *dev) goto exit_remove; } + /* Create VID-related sysfs attributes */ + if ((data->type == dme1737) && + (err = sysfs_create_group(&dev->kobj, + &dme1737_vid_group))) { + goto exit_remove; + } + /* Create fan sysfs attributes */ for (ix = 0; ix < ARRAY_SIZE(dme1737_fan_group); ix++) { if (data->has_fan & (1 << ix)) { @@ -2127,7 +2146,7 @@ static int dme1737_init_device(struct device *dev) data->pwm_acz[2] = 4; /* pwm3 -> zone3 */ /* Set VRM */ - if (data->type != sch5027) { + if (data->type == dme1737) { data->vrm = vid_which_vrm(); } diff --git a/drivers/hwmon/fschmd.c b/drivers/hwmon/fschmd.c index 2a7a85a..da1b1f9 100644 --- a/drivers/hwmon/fschmd.c +++ b/drivers/hwmon/fschmd.c @@ -819,7 +819,7 @@ static int watchdog_release(struct inode *inode, struct file *filp) static ssize_t watchdog_write(struct file *filp, const char __user *buf, size_t count, loff_t *offset) { - size_t ret; + int ret; struct fschmd_data *data = filp->private_data; if (count) { diff --git a/drivers/hwmon/hp_accel.c b/drivers/hwmon/hp_accel.c index 6679854..be475e8 100644 --- a/drivers/hwmon/hp_accel.c +++ b/drivers/hwmon/hp_accel.c @@ -197,11 +197,13 @@ static struct dmi_system_id lis3lv02d_dmi_ids[] = { AXIS_DMI_MATCH("HP2133", "HP 2133", xy_rotated_left), AXIS_DMI_MATCH("HP2140", "HP 2140", xy_swap_inverted), AXIS_DMI_MATCH("NC653x", "HP Compaq 653", xy_rotated_left_usd), - AXIS_DMI_MATCH("NC673x", "HP Compaq 673", xy_rotated_left_usd), + AXIS_DMI_MATCH("NC6730b", "HP Compaq 6730b", xy_rotated_left_usd), + AXIS_DMI_MATCH("NC6730s", "HP Compaq 6730s", xy_swap), AXIS_DMI_MATCH("NC651xx", "HP Compaq 651", xy_rotated_right), AXIS_DMI_MATCH("NC6710x", "HP Compaq 6710", xy_swap_yz_inverted), AXIS_DMI_MATCH("NC6715x", "HP Compaq 6715", y_inverted), AXIS_DMI_MATCH("NC693xx", "HP EliteBook 693", xy_rotated_right), + AXIS_DMI_MATCH("NC693xx", "HP EliteBook 853", xy_swap), /* Intel-based HP Pavilion dv5 */ AXIS_DMI_MATCH2("HPDV5_I", PRODUCT_NAME, "HP Pavilion dv5", @@ -214,6 +216,7 @@ static struct dmi_system_id lis3lv02d_dmi_ids[] = { y_inverted), AXIS_DMI_MATCH("DV7", "HP Pavilion dv7", x_inverted), AXIS_DMI_MATCH("HP8710", "HP Compaq 8710", y_inverted), + AXIS_DMI_MATCH("HDX18", "HP HDX 18", x_inverted), { NULL, } /* Laptop models without axis info (yet): * "NC6910" "HP Compaq 6910" diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index ffeb2a1..a3749cb 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -1028,12 +1028,11 @@ static int __init it87_find(unsigned short *address, chip_type, *address, sio_data->revision); /* Read GPIO config and VID value from LDN 7 (GPIO) */ - if (chip_type != IT8705F_DEVID) { + if (sio_data->type != it87) { int reg; superio_select(GPIO); - if ((chip_type == it8718) || - (chip_type == it8720)) + if (sio_data->type == it8718 || sio_data->type == it8720) sio_data->vid_value = superio_inb(IT87_SIO_VID_REG); reg = superio_inb(IT87_SIO_PINX2_REG); diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c index e832e97..a1c47ee 100644 --- a/drivers/mfd/twl4030-core.c +++ b/drivers/mfd/twl4030-core.c @@ -795,7 +795,7 @@ twl4030_probe(struct i2c_client *client, const struct i2c_device_id *id) twl->client = i2c_new_dummy(client->adapter, twl->address); if (!twl->client) { - dev_err(&twl->client->dev, + dev_err(&client->dev, "can't attach client %d\n", i); status = -ENOMEM; goto fail; diff --git a/drivers/mfd/wm831x-irq.c b/drivers/mfd/wm831x-irq.c index d3015df..ac056ea 100644 --- a/drivers/mfd/wm831x-irq.c +++ b/drivers/mfd/wm831x-irq.c @@ -507,6 +507,8 @@ int wm831x_irq_init(struct wm831x *wm831x, int irq) { int i, ret; + mutex_init(&wm831x->irq_lock); + if (!irq) { dev_warn(wm831x->dev, "No interrupt specified - functionality limited\n"); @@ -521,7 +523,6 @@ int wm831x_irq_init(struct wm831x *wm831x, int irq) } wm831x->irq = irq; - mutex_init(&wm831x->irq_lock); INIT_WORK(&wm831x->irq_work, wm831x_irq_worker); /* Mask the individual interrupt sources */ diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 4487cc0..0aecaae 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -2013,7 +2013,7 @@ static struct platform_driver omap_hsmmc_driver = { static int __init omap_hsmmc_init(void) { /* Register the MMC driver */ - return platform_driver_register(&omap_hsmmc_driver); + return platform_driver_probe(&omap_hsmmc_driver, omap_hsmmc_probe); } static void __exit omap_hsmmc_cleanup(void) diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c index e1f7d0a..14cec04 100644 --- a/drivers/mtd/ubi/build.c +++ b/drivers/mtd/ubi/build.c @@ -42,6 +42,7 @@ #include <linux/log2.h> #include <linux/kthread.h> #include <linux/reboot.h> +#include <linux/kernel.h> #include "ubi.h" /* Maximum length of the 'mtd=' parameter */ @@ -1257,7 +1258,7 @@ static int __init bytes_str_to_int(const char *str) unsigned long result; result = simple_strtoul(str, &endp, 0); - if (str == endp || result < 0) { + if (str == endp || result >= INT_MAX) { printk(KERN_ERR "UBI error: incorrect bytes count: \"%s\"\n", str); return -EINVAL; diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c index e7161ad..90af61a 100644 --- a/drivers/mtd/ubi/scan.c +++ b/drivers/mtd/ubi/scan.c @@ -794,16 +794,15 @@ static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si, * number. */ image_seq = be32_to_cpu(ech->image_seq); - if (!si->image_seq_set) { + if (!ubi->image_seq && image_seq) ubi->image_seq = image_seq; - si->image_seq_set = 1; - } else if (ubi->image_seq && ubi->image_seq != image_seq) { + if (ubi->image_seq && image_seq && + ubi->image_seq != image_seq) { ubi_err("bad image sequence number %d in PEB %d, " "expected %d", image_seq, pnum, ubi->image_seq); ubi_dbg_dump_ec_hdr(ech); return -EINVAL; } - } /* OK, we've done with the EC header, let's look at the VID header */ diff --git a/drivers/mtd/ubi/scan.h b/drivers/mtd/ubi/scan.h index bab3169..ff179ad 100644 --- a/drivers/mtd/ubi/scan.h +++ b/drivers/mtd/ubi/scan.h @@ -103,7 +103,6 @@ struct ubi_scan_volume { * @ec_sum: a temporary variable used when calculating @mean_ec * @ec_count: a temporary variable used when calculating @mean_ec * @corr_count: count of corrupted PEBs - * @image_seq_set: indicates @ubi->image_seq is known * * This data structure contains the result of scanning and may be used by other * UBI sub-systems to build final UBI data structures, further error-recovery @@ -127,7 +126,6 @@ struct ubi_scan_info { uint64_t ec_sum; int ec_count; int corr_count; - int image_seq_set; }; struct ubi_device; diff --git a/drivers/pcmcia/cistpl.c b/drivers/pcmcia/cistpl.c index 4a110b7..6c4a4fc 100644 --- a/drivers/pcmcia/cistpl.c +++ b/drivers/pcmcia/cistpl.c @@ -1463,7 +1463,9 @@ int pccard_read_tuple(struct pcmcia_socket *s, unsigned int function, cisdata_t return -ENOMEM; } tuple.DesiredTuple = code; - tuple.Attributes = TUPLE_RETURN_COMMON; + tuple.Attributes = 0; + if (function == BIND_FN_ALL) + tuple.Attributes = TUPLE_RETURN_COMMON; ret = pccard_get_first_tuple(s, function, &tuple); if (ret != 0) goto done; @@ -1490,7 +1492,7 @@ EXPORT_SYMBOL(pccard_read_tuple); ======================================================================*/ -int pccard_validate_cis(struct pcmcia_socket *s, unsigned int function, unsigned int *info) +int pccard_validate_cis(struct pcmcia_socket *s, unsigned int *info) { tuple_t *tuple; cisparse_t *p; @@ -1515,30 +1517,30 @@ int pccard_validate_cis(struct pcmcia_socket *s, unsigned int function, unsigned count = reserved = 0; tuple->DesiredTuple = RETURN_FIRST_TUPLE; tuple->Attributes = TUPLE_RETURN_COMMON; - ret = pccard_get_first_tuple(s, function, tuple); + ret = pccard_get_first_tuple(s, BIND_FN_ALL, tuple); if (ret != 0) goto done; /* First tuple should be DEVICE; we should really have either that or a CFTABLE_ENTRY of some sort */ if ((tuple->TupleCode == CISTPL_DEVICE) || - (pccard_read_tuple(s, function, CISTPL_CFTABLE_ENTRY, p) == 0) || - (pccard_read_tuple(s, function, CISTPL_CFTABLE_ENTRY_CB, p) == 0)) + (pccard_read_tuple(s, BIND_FN_ALL, CISTPL_CFTABLE_ENTRY, p) == 0) || + (pccard_read_tuple(s, BIND_FN_ALL, CISTPL_CFTABLE_ENTRY_CB, p) == 0)) dev_ok++; /* All cards should have a MANFID tuple, and/or a VERS_1 or VERS_2 tuple, for card identification. Certain old D-Link and Linksys cards have only a broken VERS_2 tuple; hence the bogus test. */ - if ((pccard_read_tuple(s, function, CISTPL_MANFID, p) == 0) || - (pccard_read_tuple(s, function, CISTPL_VERS_1, p) == 0) || - (pccard_read_tuple(s, function, CISTPL_VERS_2, p) != -ENOSPC)) + if ((pccard_read_tuple(s, BIND_FN_ALL, CISTPL_MANFID, p) == 0) || + (pccard_read_tuple(s, BIND_FN_ALL, CISTPL_VERS_1, p) == 0) || + (pccard_read_tuple(s, BIND_FN_ALL, CISTPL_VERS_2, p) != -ENOSPC)) ident_ok++; if (!dev_ok && !ident_ok) goto done; for (count = 1; count < MAX_TUPLES; count++) { - ret = pccard_get_next_tuple(s, function, tuple); + ret = pccard_get_next_tuple(s, BIND_FN_ALL, tuple); if (ret != 0) break; if (((tuple->TupleCode > 0x23) && (tuple->TupleCode < 0x40)) || diff --git a/drivers/pcmcia/cs_internal.h b/drivers/pcmcia/cs_internal.h index 79615e6..1f4098f 100644 --- a/drivers/pcmcia/cs_internal.h +++ b/drivers/pcmcia/cs_internal.h @@ -197,8 +197,7 @@ int pccard_read_tuple(struct pcmcia_socket *s, unsigned int function, cisdata_t code, void *parse); int pcmcia_replace_cis(struct pcmcia_socket *s, const u8 *data, const size_t len); -int pccard_validate_cis(struct pcmcia_socket *s, unsigned int function, - unsigned int *count); +int pccard_validate_cis(struct pcmcia_socket *s, unsigned int *count); /* rsrc_mgr.c */ int pcmcia_validate_mem(struct pcmcia_socket *s); diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c index 9f300d3..f5b7079 100644 --- a/drivers/pcmcia/ds.c +++ b/drivers/pcmcia/ds.c @@ -547,7 +547,7 @@ static int pcmcia_device_query(struct pcmcia_device *p_dev) if (!vers1) return -ENOMEM; - if (!pccard_read_tuple(p_dev->socket, p_dev->func, + if (!pccard_read_tuple(p_dev->socket, BIND_FN_ALL, CISTPL_MANFID, &manf_id)) { p_dev->manf_id = manf_id.manf; p_dev->card_id = manf_id.card; @@ -581,9 +581,9 @@ static int pcmcia_device_query(struct pcmcia_device *p_dev) kfree(devgeo); } - if (!pccard_read_tuple(p_dev->socket, p_dev->func, CISTPL_VERS_1, + if (!pccard_read_tuple(p_dev->socket, BIND_FN_ALL, CISTPL_VERS_1, vers1)) { - for (i=0; i < vers1->ns; i++) { + for (i = 0; i < min_t(unsigned int, 4, vers1->ns); i++) { char *tmp; unsigned int length; @@ -733,7 +733,7 @@ static int pcmcia_card_add(struct pcmcia_socket *s) return -EAGAIN; /* try again, but later... */ } - ret = pccard_validate_cis(s, BIND_FN_ALL, &no_chains); + ret = pccard_validate_cis(s, &no_chains); if (ret || !no_chains) { ds_dev_dbg(0, &s->dev, "invalid CIS or invalid resources\n"); return -ENODEV; diff --git a/drivers/pcmcia/i82365.c b/drivers/pcmcia/i82365.c index b906abe..a4aacb8 100644 --- a/drivers/pcmcia/i82365.c +++ b/drivers/pcmcia/i82365.c @@ -1053,8 +1053,8 @@ static int i365_set_io_map(u_short sock, struct pccard_io_map *io) u_char map, ioctl; debug(1, "SetIOMap(%d, %d, %#2.2x, %d ns, " - "%#x-%#x)\n", sock, io->map, io->flags, - io->speed, io->start, io->stop); + "%#llx-%#llx)\n", sock, io->map, io->flags, io->speed, + (unsigned long long)io->start, (unsigned long long)io->stop); map = io->map; if ((map > 1) || (io->start > 0xffff) || (io->stop > 0xffff) || (io->stop < io->start)) return -EINVAL; diff --git a/drivers/pcmcia/m32r_cfc.c b/drivers/pcmcia/m32r_cfc.c index d1d89c4..7dfbee1 100644 --- a/drivers/pcmcia/m32r_cfc.c +++ b/drivers/pcmcia/m32r_cfc.c @@ -537,8 +537,9 @@ static int _pcc_set_io_map(u_short sock, struct pccard_io_map *io) u_char map; debug(3, "m32r_cfc: SetIOMap(%d, %d, %#2.2x, %d ns, " - "%#lx-%#lx)\n", sock, io->map, io->flags, - io->speed, io->start, io->stop); + "%#llx-%#llx)\n", sock, io->map, io->flags, + io->speed, (unsigned long long)io->start, + (unsigned long long)io->stop); map = io->map; return 0; @@ -554,8 +555,9 @@ static int _pcc_set_mem_map(u_short sock, struct pccard_mem_map *mem) pcc_socket_t *t = &socket[sock]; debug(3, "m32r_cfc: SetMemMap(%d, %d, %#2.2x, %d ns, " - "%#lx, %#x)\n", sock, map, mem->flags, - mem->speed, mem->static_start, mem->card_start); + "%#llx, %#x)\n", sock, map, mem->flags, + mem->speed, (unsigned long long)mem->static_start, + mem->card_start); /* * sanity check diff --git a/drivers/pcmcia/m32r_pcc.c b/drivers/pcmcia/m32r_pcc.c index a065583..c6524f9 100644 --- a/drivers/pcmcia/m32r_pcc.c +++ b/drivers/pcmcia/m32r_pcc.c @@ -492,8 +492,9 @@ static int _pcc_set_io_map(u_short sock, struct pccard_io_map *io) u_char map; debug(3, "m32r-pcc: SetIOMap(%d, %d, %#2.2x, %d ns, " - "%#x-%#x)\n", sock, io->map, io->flags, - io->speed, io->start, io->stop); + "%#llx-%#llx)\n", sock, io->map, io->flags, + io->speed, (unsigned long long)io->start, + (unsigned long long)io->stop); map = io->map; return 0; @@ -515,8 +516,9 @@ static int _pcc_set_mem_map(u_short sock, struct pccard_mem_map *mem) #endif debug(3, "m32r-pcc: SetMemMap(%d, %d, %#2.2x, %d ns, " - "%#lx, %#x)\n", sock, map, mem->flags, - mem->speed, mem->static_start, mem->card_start); + "%#llx, %#x)\n", sock, map, mem->flags, + mem->speed, (unsigned long long)mem->static_start, + mem->card_start); /* * sanity check diff --git a/drivers/pcmcia/m8xx_pcmcia.c b/drivers/pcmcia/m8xx_pcmcia.c index c69f2c4..403559b 100644 --- a/drivers/pcmcia/m8xx_pcmcia.c +++ b/drivers/pcmcia/m8xx_pcmcia.c @@ -975,8 +975,9 @@ static int m8xx_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *io) #define M8XX_BASE (PCMCIA_IO_WIN_BASE + io->start) dprintk("SetIOMap(%d, %d, %#2.2x, %d ns, " - "%#4.4x-%#4.4x)\n", lsock, io->map, io->flags, - io->speed, io->start, io->stop); + "%#4.4llx-%#4.4llx)\n", lsock, io->map, io->flags, + io->speed, (unsigned long long)io->start, + (unsigned long long)io->stop); if ((io->map >= PCMCIA_IO_WIN_NO) || (io->start > 0xffff) || (io->stop > 0xffff) || (io->stop < io->start)) @@ -1055,8 +1056,9 @@ static int m8xx_set_mem_map(struct pcmcia_socket *sock, pcmconf8xx_t *pcmcia = s->pcmcia; dprintk("SetMemMap(%d, %d, %#2.2x, %d ns, " - "%#5.5lx, %#5.5x)\n", lsock, mem->map, mem->flags, - mem->speed, mem->static_start, mem->card_start); + "%#5.5llx, %#5.5x)\n", lsock, mem->map, mem->flags, + mem->speed, (unsigned long long)mem->static_start, + mem->card_start); if ((mem->map >= PCMCIA_MEM_WIN_NO) // || ((mem->s) >= PCMCIA_MEM_WIN_SIZE) @@ -1107,8 +1109,9 @@ static int m8xx_set_mem_map(struct pcmcia_socket *sock, } dprintk("SetMemMap(%d, %d, %#2.2x, %d ns, " - "%#5.5lx, %#5.5x)\n", lsock, mem->map, mem->flags, - mem->speed, mem->static_start, mem->card_start); + "%#5.5llx, %#5.5x)\n", lsock, mem->map, mem->flags, + mem->speed, (unsigned long long)mem->static_start, + mem->card_start); /* copy the struct and modify the copy */ diff --git a/drivers/pcmcia/pcmcia_ioctl.c b/drivers/pcmcia/pcmcia_ioctl.c index 32c4404..30cf71d 100644 --- a/drivers/pcmcia/pcmcia_ioctl.c +++ b/drivers/pcmcia/pcmcia_ioctl.c @@ -881,7 +881,7 @@ static int ds_ioctl(struct inode * inode, struct file * file, mutex_lock(&s->skt_mutex); pcmcia_validate_mem(s); mutex_unlock(&s->skt_mutex); - ret = pccard_validate_cis(s, BIND_FN_ALL, &buf->cisinfo.Chains); + ret = pccard_validate_cis(s, &buf->cisinfo.Chains); break; case DS_SUSPEND_CARD: ret = pcmcia_suspend_card(s); diff --git a/drivers/pcmcia/pd6729.c b/drivers/pcmcia/pd6729.c index 1c39d34..70a3346 100644 --- a/drivers/pcmcia/pd6729.c +++ b/drivers/pcmcia/pd6729.c @@ -641,6 +641,12 @@ static int __devinit pd6729_pci_probe(struct pci_dev *dev, if ((ret = pci_enable_device(dev))) goto err_out_free_mem; + if (!pci_resource_start(dev, 0)) { + printk(KERN_INFO "pd6729: refusing to load the driver " + "as the io_base is 0.\n"); + goto err_out_free_mem; + } + printk(KERN_INFO "pd6729: Cirrus PD6729 PCI to PCMCIA Bridge " "at 0x%llx on irq %d\n", (unsigned long long)pci_resource_start(dev, 0), dev->irq); diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c index 9ca22c7..7039f3c 100644 --- a/drivers/pcmcia/rsrc_nonstatic.c +++ b/drivers/pcmcia/rsrc_nonstatic.c @@ -206,6 +206,7 @@ static void do_io_probe(struct pcmcia_socket *s, unsigned int base, /* First, what does a floating port look like? */ b = kzalloc(256, GFP_KERNEL); if (!b) { + printk("\n"); dev_printk(KERN_ERR, &s->dev, "do_io_probe: unable to kmalloc 256 bytes"); return; @@ -275,7 +276,7 @@ static int readable(struct pcmcia_socket *s, struct resource *res, s->cis_mem.res = res; s->cis_virt = ioremap(res->start, s->map_size); if (s->cis_virt) { - ret = pccard_validate_cis(s, BIND_FN_ALL, count); + ret = pccard_validate_cis(s, count); /* invalidate mapping and CIS cache */ iounmap(s->cis_virt); s->cis_virt = NULL; diff --git a/drivers/pcmcia/soc_common.c b/drivers/pcmcia/soc_common.c index 163cf98..ef7e9e5 100644 --- a/drivers/pcmcia/soc_common.c +++ b/drivers/pcmcia/soc_common.c @@ -336,8 +336,9 @@ soc_common_pcmcia_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *m struct soc_pcmcia_socket *skt = to_soc_pcmcia_socket(sock); unsigned short speed = map->speed; - debug(skt, 2, "map %u speed %u start 0x%08x stop 0x%08x\n", - map->map, map->speed, map->start, map->stop); + debug(skt, 2, "map %u speed %u start 0x%08llx stop 0x%08llx\n", + map->map, map->speed, (unsigned long long)map->start, + (unsigned long long)map->stop); debug(skt, 2, "flags: %s%s%s%s%s%s%s%s\n", (map->flags==0)?"<NONE>":"", (map->flags&MAP_ACTIVE)?"ACTIVE ":"", diff --git a/drivers/pcmcia/socket_sysfs.c b/drivers/pcmcia/socket_sysfs.c index ff9a3bb..78d5aab 100644 --- a/drivers/pcmcia/socket_sysfs.c +++ b/drivers/pcmcia/socket_sysfs.c @@ -300,7 +300,7 @@ static ssize_t pccard_show_cis(struct kobject *kobj, if (!(s->state & SOCKET_PRESENT)) return -ENODEV; - if (pccard_validate_cis(s, BIND_FN_ALL, &chains)) + if (pccard_validate_cis(s, &chains)) return -EIO; if (!chains) return -ENODATA; diff --git a/drivers/pcmcia/tcic.c b/drivers/pcmcia/tcic.c index 582413f..6918849 100644 --- a/drivers/pcmcia/tcic.c +++ b/drivers/pcmcia/tcic.c @@ -732,8 +732,8 @@ static int tcic_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *io) u_short base, len, ioctl; debug(1, "SetIOMap(%d, %d, %#2.2x, %d ns, " - "%#x-%#x)\n", psock, io->map, io->flags, - io->speed, io->start, io->stop); + "%#llx-%#llx)\n", psock, io->map, io->flags, io->speed, + (unsigned long long)io->start, (unsigned long long)io->stop); if ((io->map > 1) || (io->start > 0xffff) || (io->stop > 0xffff) || (io->stop < io->start)) return -EINVAL; tcic_setw(TCIC_ADDR+2, TCIC_ADR2_INDREG | (psock << TCIC_SS_SHFT)); diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index e7108e7..42e8550 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -1561,11 +1561,16 @@ enum pci_board_num_t { pbn_exar_XR17C152, pbn_exar_XR17C154, pbn_exar_XR17C158, + pbn_exar_ibm_saturn, pbn_pasemi_1682M, pbn_ni8430_2, pbn_ni8430_4, pbn_ni8430_8, pbn_ni8430_16, + pbn_ADDIDATA_PCIe_1_3906250, + pbn_ADDIDATA_PCIe_2_3906250, + pbn_ADDIDATA_PCIe_4_3906250, + pbn_ADDIDATA_PCIe_8_3906250, }; /* @@ -2146,6 +2151,13 @@ static struct pciserial_board pci_boards[] __devinitdata = { .base_baud = 921600, .uart_offset = 0x200, }, + [pbn_exar_ibm_saturn] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 921600, + .uart_offset = 0x200, + }, + /* * PA Semi PWRficient PA6T-1682M on-chip UART */ @@ -2185,6 +2197,37 @@ static struct pciserial_board pci_boards[] __devinitdata = { .uart_offset = 0x10, .first_offset = 0x800, }, + /* + * ADDI-DATA GmbH PCI-Express communication cards <info@addi-data.com> + */ + [pbn_ADDIDATA_PCIe_1_3906250] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 3906250, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_ADDIDATA_PCIe_2_3906250] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 3906250, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_ADDIDATA_PCIe_4_3906250] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 3906250, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_ADDIDATA_PCIe_8_3906250] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 3906250, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, }; static const struct pci_device_id softmodem_blacklist[] = { @@ -2649,6 +2692,9 @@ static struct pci_device_id serial_pci_tbl[] = { PCI_SUBVENDOR_ID_CONNECT_TECH, PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_485, 0, 0, pbn_b0_8_1843200_200 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152, + PCI_VENDOR_ID_IBM, PCI_SUBDEVICE_ID_IBM_SATURN_SERIAL_ONE_PORT, + 0, 0, pbn_exar_ibm_saturn }, { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_U530, PCI_ANY_ID, PCI_ANY_ID, 0, 0, @@ -3556,6 +3602,38 @@ static struct pci_device_id serial_pci_tbl[] = { 0, pbn_b0_8_115200 }, + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCIe7500, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_ADDIDATA_PCIe_4_3906250 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCIe7420, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_ADDIDATA_PCIe_2_3906250 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCIe7300, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_ADDIDATA_PCIe_1_3906250 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCIe7800, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_ADDIDATA_PCIe_8_3906250 }, + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835, PCI_VENDOR_ID_IBM, 0x0299, 0, 0, pbn_b0_bt_2_115200 }, diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c index 3551c5c..9d948bc 100644 --- a/drivers/serial/atmel_serial.c +++ b/drivers/serial/atmel_serial.c @@ -1531,7 +1531,7 @@ static int __devinit atmel_serial_probe(struct platform_device *pdev) void *data; int ret; - BUILD_BUG_ON(!is_power_of_2(ATMEL_SERIAL_RINGSIZE)); + BUILD_BUG_ON(ATMEL_SERIAL_RINGSIZE & (ATMEL_SERIAL_RINGSIZE - 1)); port = &atmel_ports[pdev->id]; port->backup_imr = 0; diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 3335131..a18e3c5 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -223,6 +223,7 @@ config USB_OTG config USB_GADGET_PXA25X boolean "PXA 25x or IXP 4xx" depends on (ARCH_PXA && PXA25x) || ARCH_IXP4XX + select USB_OTG_UTILS help Intel's PXA 25x series XScale ARM-5TE processors include an integrated full speed USB 1.1 device controller. The diff --git a/fs/hfs/btree.c b/fs/hfs/btree.c index 9b9d639..052f214 100644 --- a/fs/hfs/btree.c +++ b/fs/hfs/btree.c @@ -58,6 +58,11 @@ struct hfs_btree *hfs_btree_open(struct super_block *sb, u32 id, btree_keycmp ke } unlock_new_inode(tree->inode); + if (!HFS_I(tree->inode)->first_blocks) { + printk(KERN_ERR "hfs: invalid btree extent records (0 size).\n"); + goto free_inode; + } + mapping = tree->inode->i_mapping; page = read_mapping_page(mapping, 0, NULL); if (IS_ERR(page)) diff --git a/fs/hfsplus/wrapper.c b/fs/hfsplus/wrapper.c index 175d08e..bed78ac8 100644 --- a/fs/hfsplus/wrapper.c +++ b/fs/hfsplus/wrapper.c @@ -99,6 +99,10 @@ int hfsplus_read_wrapper(struct super_block *sb) if (hfsplus_get_last_session(sb, &part_start, &part_size)) return -EINVAL; + if ((u64)part_start + part_size > 0x100000000ULL) { + pr_err("hfs: volumes larger than 2TB are not supported yet\n"); + return -EINVAL; + } while (1) { bh = sb_bread512(sb, part_start + HFSPLUS_VOLHEAD_SECTOR, vhdr); if (!bh) diff --git a/fs/proc/meminfo.c b/fs/proc/meminfo.c index c7bff4f..a65239c 100644 --- a/fs/proc/meminfo.c +++ b/fs/proc/meminfo.c @@ -99,7 +99,7 @@ static int meminfo_proc_show(struct seq_file *m, void *v) "VmallocUsed: %8lu kB\n" "VmallocChunk: %8lu kB\n" #ifdef CONFIG_MEMORY_FAILURE - "HardwareCorrupted: %8lu kB\n" + "HardwareCorrupted: %5lu kB\n" #endif , K(i.totalram), diff --git a/fs/xfs/quota/xfs_qm_syscalls.c b/fs/xfs/quota/xfs_qm_syscalls.c index 4e4276b9..5d1a3b9 100644 --- a/fs/xfs/quota/xfs_qm_syscalls.c +++ b/fs/xfs/quota/xfs_qm_syscalls.c @@ -876,7 +876,6 @@ xfs_dqrele_inode( ip->i_gdquot = NULL; } xfs_iput(ip, XFS_ILOCK_EXCL); - IRELE(ip); return 0; } diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index 44717eb..79a2340 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -291,8 +291,15 @@ struct global_attr { int cpufreq_get_policy(struct cpufreq_policy *policy, unsigned int cpu); int cpufreq_update_policy(unsigned int cpu); +#ifdef CONFIG_CPU_FREQ /* query the current CPU frequency (in kHz). If zero, cpufreq couldn't detect it */ unsigned int cpufreq_get(unsigned int cpu); +#else +static inline unsigned int cpufreq_get(unsigned int cpu) +{ + return 0; +} +#endif /* query the last known CPU freq (in kHz). If zero, cpufreq couldn't detect it */ #ifdef CONFIG_CPU_FREQ diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 86257a4..b0f0f38 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -482,6 +482,9 @@ #define PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM_PCIE 0x0361 #define PCI_DEVICE_ID_IBM_ICOM_FOUR_PORT_MODEL 0x252 +#define PCI_SUBVENDOR_ID_IBM 0x1014 +#define PCI_SUBDEVICE_ID_IBM_SATURN_SERIAL_ONE_PORT 0x03d4 + #define PCI_VENDOR_ID_UNISYS 0x1018 #define PCI_DEVICE_ID_UNISYS_DMA_DIRECTOR 0x001C @@ -2160,6 +2163,10 @@ #define PCI_DEVICE_ID_ADDIDATA_APCI7420_3 0x700D #define PCI_DEVICE_ID_ADDIDATA_APCI7300_3 0x700E #define PCI_DEVICE_ID_ADDIDATA_APCI7800_3 0x700F +#define PCI_DEVICE_ID_ADDIDATA_APCIe7300 0x7010 +#define PCI_DEVICE_ID_ADDIDATA_APCIe7420 0x7011 +#define PCI_DEVICE_ID_ADDIDATA_APCIe7500 0x7012 +#define PCI_DEVICE_ID_ADDIDATA_APCIe7800 0x7013 #define PCI_VENDOR_ID_PDC 0x15e9 diff --git a/include/linux/prctl.h b/include/linux/prctl.h index 9311505..a3baeb2 100644 --- a/include/linux/prctl.h +++ b/include/linux/prctl.h @@ -88,6 +88,18 @@ #define PR_TASK_PERF_EVENTS_DISABLE 31 #define PR_TASK_PERF_EVENTS_ENABLE 32 +/* + * Set early/late kill mode for hwpoison memory corruption. + * This influences when the process gets killed on a memory corruption. + */ #define PR_MCE_KILL 33 +# define PR_MCE_KILL_CLEAR 0 +# define PR_MCE_KILL_SET 1 + +# define PR_MCE_KILL_LATE 0 +# define PR_MCE_KILL_EARLY 1 +# define PR_MCE_KILL_DEFAULT 2 + +#define PR_MCE_KILL_GET 34 #endif /* _LINUX_PRCTL_H */ diff --git a/include/linux/rcutree.h b/include/linux/rcutree.h index 46e9ab3..9642c6b 100644 --- a/include/linux/rcutree.h +++ b/include/linux/rcutree.h @@ -76,11 +76,7 @@ static inline void __rcu_read_unlock_bh(void) extern void call_rcu_sched(struct rcu_head *head, void (*func)(struct rcu_head *rcu)); - -static inline void synchronize_rcu_expedited(void) -{ - synchronize_sched_expedited(); -} +extern void synchronize_rcu_expedited(void); static inline void synchronize_rcu_bh_expedited(void) { diff --git a/include/linux/string.h b/include/linux/string.h index 489019e..b850886 100644 --- a/include/linux/string.h +++ b/include/linux/string.h @@ -62,7 +62,7 @@ extern char * strnchr(const char *, size_t, int); #ifndef __HAVE_ARCH_STRRCHR extern char * strrchr(const char *,int); #endif -extern char * strstrip(char *); +extern char * __must_check strstrip(char *); #ifndef __HAVE_ARCH_STRSTR extern char * strstr(const char *,const char *); #endif diff --git a/include/linux/topology.h b/include/linux/topology.h index fc0bf3e..57e6357 100644 --- a/include/linux/topology.h +++ b/include/linux/topology.h @@ -129,7 +129,7 @@ int arch_update_cpu_topology(void); | 1*SD_BALANCE_FORK \ | 0*SD_BALANCE_WAKE \ | 1*SD_WAKE_AFFINE \ - | 1*SD_PREFER_LOCAL \ + | 0*SD_PREFER_LOCAL \ | 0*SD_SHARE_CPUPOWER \ | 1*SD_SHARE_PKG_RESOURCES \ | 0*SD_SERIALIZE \ @@ -162,7 +162,7 @@ int arch_update_cpu_topology(void); | 1*SD_BALANCE_FORK \ | 0*SD_BALANCE_WAKE \ | 1*SD_WAKE_AFFINE \ - | 1*SD_PREFER_LOCAL \ + | 0*SD_PREFER_LOCAL \ | 0*SD_SHARE_CPUPOWER \ | 0*SD_SHARE_PKG_RESOURCES \ | 0*SD_SERIALIZE \ diff --git a/kernel/cgroup.c b/kernel/cgroup.c index ca83b73..0249f4b 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -1710,14 +1710,13 @@ static ssize_t cgroup_write_X64(struct cgroup *cgrp, struct cftype *cft, return -EFAULT; buffer[nbytes] = 0; /* nul-terminate */ - strstrip(buffer); if (cft->write_u64) { - u64 val = simple_strtoull(buffer, &end, 0); + u64 val = simple_strtoull(strstrip(buffer), &end, 0); if (*end) return -EINVAL; retval = cft->write_u64(cgrp, cft, val); } else { - s64 val = simple_strtoll(buffer, &end, 0); + s64 val = simple_strtoll(strstrip(buffer), &end, 0); if (*end) return -EINVAL; retval = cft->write_s64(cgrp, cft, val); @@ -1753,8 +1752,7 @@ static ssize_t cgroup_write_string(struct cgroup *cgrp, struct cftype *cft, } buffer[nbytes] = 0; /* nul-terminate */ - strstrip(buffer); - retval = cft->write_string(cgrp, cft, buffer); + retval = cft->write_string(cgrp, cft, strstrip(buffer)); if (!retval) retval = nbytes; out: diff --git a/kernel/exit.c b/kernel/exit.c index e61891f..f7864ac 100644 --- a/kernel/exit.c +++ b/kernel/exit.c @@ -359,10 +359,8 @@ void __set_special_pids(struct pid *pid) { struct task_struct *curr = current->group_leader; - if (task_session(curr) != pid) { + if (task_session(curr) != pid) change_pid(curr, PIDTYPE_SID, pid); - proc_sid_connector(curr); - } if (task_pgrp(curr) != pid) change_pid(curr, PIDTYPE_PGID, pid); diff --git a/kernel/futex.c b/kernel/futex.c index 4949d33..642f3bb 100644 --- a/kernel/futex.c +++ b/kernel/futex.c @@ -150,7 +150,8 @@ static struct futex_hash_bucket *hash_futex(union futex_key *key) */ static inline int match_futex(union futex_key *key1, union futex_key *key2) { - return (key1->both.word == key2->both.word + return (key1 && key2 + && key1->both.word == key2->both.word && key1->both.ptr == key2->both.ptr && key1->both.offset == key2->both.offset); } @@ -1028,7 +1029,6 @@ static inline void requeue_pi_wake_futex(struct futex_q *q, union futex_key *key, struct futex_hash_bucket *hb) { - drop_futex_key_refs(&q->key); get_futex_key_refs(key); q->key = *key; @@ -1226,6 +1226,7 @@ retry_private: */ if (ret == 1) { WARN_ON(pi_state); + drop_count++; task_count++; ret = get_futex_value_locked(&curval2, uaddr2); if (!ret) @@ -1304,6 +1305,7 @@ retry_private: if (ret == 1) { /* We got the lock. */ requeue_pi_wake_futex(this, &key2, hb2); + drop_count++; continue; } else if (ret) { /* -EDEADLK */ @@ -1791,6 +1793,7 @@ static int futex_wait(u32 __user *uaddr, int fshared, current->timer_slack_ns); } +retry: /* Prepare to wait on uaddr. */ ret = futex_wait_setup(uaddr, val, fshared, &q, &hb); if (ret) @@ -1808,9 +1811,14 @@ static int futex_wait(u32 __user *uaddr, int fshared, goto out_put_key; /* - * We expect signal_pending(current), but another thread may - * have handled it for us already. + * We expect signal_pending(current), but we might be the + * victim of a spurious wakeup as well. */ + if (!signal_pending(current)) { + put_futex_key(fshared, &q.key); + goto retry; + } + ret = -ERESTARTSYS; if (!abs_time) goto out_put_key; @@ -2118,9 +2126,11 @@ int handle_early_requeue_pi_wakeup(struct futex_hash_bucket *hb, */ plist_del(&q->list, &q->list.plist); + /* Handle spurious wakeups gracefully */ + ret = -EAGAIN; if (timeout && !timeout->task) ret = -ETIMEDOUT; - else + else if (signal_pending(current)) ret = -ERESTARTNOINTR; } return ret; @@ -2198,6 +2208,7 @@ static int futex_wait_requeue_pi(u32 __user *uaddr, int fshared, debug_rt_mutex_init_waiter(&rt_waiter); rt_waiter.task = NULL; +retry: key2 = FUTEX_KEY_INIT; ret = get_futex_key(uaddr2, fshared, &key2, VERIFY_WRITE); if (unlikely(ret != 0)) @@ -2292,6 +2303,9 @@ out_put_keys: out_key2: put_futex_key(fshared, &key2); + /* Spurious wakeup ? */ + if (ret == -EAGAIN) + goto retry; out: if (to) { hrtimer_cancel(&to->timer); diff --git a/kernel/perf_event.c b/kernel/perf_event.c index 9d0b5c6..afb7ef3d 100644 --- a/kernel/perf_event.c +++ b/kernel/perf_event.c @@ -1355,7 +1355,7 @@ static void perf_ctx_adjust_freq(struct perf_event_context *ctx) u64 interrupts, freq; spin_lock(&ctx->lock); - list_for_each_entry(event, &ctx->group_list, group_entry) { + list_for_each_entry_rcu(event, &ctx->event_list, event_entry) { if (event->state != PERF_EVENT_STATE_ACTIVE) continue; diff --git a/kernel/rcutree.c b/kernel/rcutree.c index 705f02a..0536125 100644 --- a/kernel/rcutree.c +++ b/kernel/rcutree.c @@ -913,7 +913,20 @@ static void __rcu_offline_cpu(int cpu, struct rcu_state *rsp) spin_unlock(&rnp->lock); /* irqs remain disabled. */ break; } - rcu_preempt_offline_tasks(rsp, rnp, rdp); + + /* + * If there was a task blocking the current grace period, + * and if all CPUs have checked in, we need to propagate + * the quiescent state up the rcu_node hierarchy. But that + * is inconvenient at the moment due to deadlock issues if + * this should end the current grace period. So set the + * offlined CPU's bit in ->qsmask in order to force the + * next force_quiescent_state() invocation to clean up this + * mess in a deadlock-free manner. + */ + if (rcu_preempt_offline_tasks(rsp, rnp, rdp) && !rnp->qsmask) + rnp->qsmask |= mask; + mask = rnp->grpmask; spin_unlock(&rnp->lock); /* irqs remain disabled. */ rnp = rnp->parent; @@ -958,7 +971,7 @@ static void rcu_offline_cpu(int cpu) * Invoke any RCU callbacks that have made it to the end of their grace * period. Thottle as specified by rdp->blimit. */ -static void rcu_do_batch(struct rcu_data *rdp) +static void rcu_do_batch(struct rcu_state *rsp, struct rcu_data *rdp) { unsigned long flags; struct rcu_head *next, *list, **tail; @@ -1011,6 +1024,13 @@ static void rcu_do_batch(struct rcu_data *rdp) if (rdp->blimit == LONG_MAX && rdp->qlen <= qlowmark) rdp->blimit = blimit; + /* Reset ->qlen_last_fqs_check trigger if enough CBs have drained. */ + if (rdp->qlen == 0 && rdp->qlen_last_fqs_check != 0) { + rdp->qlen_last_fqs_check = 0; + rdp->n_force_qs_snap = rsp->n_force_qs; + } else if (rdp->qlen < rdp->qlen_last_fqs_check - qhimark) + rdp->qlen_last_fqs_check = rdp->qlen; + local_irq_restore(flags); /* Re-raise the RCU softirq if there are callbacks remaining. */ @@ -1224,7 +1244,7 @@ __rcu_process_callbacks(struct rcu_state *rsp, struct rcu_data *rdp) } /* If there are callbacks ready, invoke them. */ - rcu_do_batch(rdp); + rcu_do_batch(rsp, rdp); } /* @@ -1288,10 +1308,20 @@ __call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu), rcu_start_gp(rsp, nestflag); /* releases rnp_root->lock. */ } - /* Force the grace period if too many callbacks or too long waiting. */ - if (unlikely(++rdp->qlen > qhimark)) { + /* + * Force the grace period if too many callbacks or too long waiting. + * Enforce hysteresis, and don't invoke force_quiescent_state() + * if some other CPU has recently done so. Also, don't bother + * invoking force_quiescent_state() if the newly enqueued callback + * is the only one waiting for a grace period to complete. + */ + if (unlikely(++rdp->qlen > rdp->qlen_last_fqs_check + qhimark)) { rdp->blimit = LONG_MAX; - force_quiescent_state(rsp, 0); + if (rsp->n_force_qs == rdp->n_force_qs_snap && + *rdp->nxttail[RCU_DONE_TAIL] != head) + force_quiescent_state(rsp, 0); + rdp->n_force_qs_snap = rsp->n_force_qs; + rdp->qlen_last_fqs_check = rdp->qlen; } else if ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0) force_quiescent_state(rsp, 1); local_irq_restore(flags); @@ -1523,6 +1553,8 @@ rcu_init_percpu_data(int cpu, struct rcu_state *rsp, int preemptable) rdp->beenonline = 1; /* We have now been online. */ rdp->preemptable = preemptable; rdp->passed_quiesc_completed = lastcomp - 1; + rdp->qlen_last_fqs_check = 0; + rdp->n_force_qs_snap = rsp->n_force_qs; rdp->blimit = blimit; spin_unlock(&rnp->lock); /* irqs remain disabled. */ diff --git a/kernel/rcutree.h b/kernel/rcutree.h index b40ac57..1823c6e 100644 --- a/kernel/rcutree.h +++ b/kernel/rcutree.h @@ -167,6 +167,10 @@ struct rcu_data { struct rcu_head *nxtlist; struct rcu_head **nxttail[RCU_NEXT_SIZE]; long qlen; /* # of queued callbacks */ + long qlen_last_fqs_check; + /* qlen at last check for QS forcing */ + unsigned long n_force_qs_snap; + /* did other CPU force QS recently? */ long blimit; /* Upper limit on a processed batch */ #ifdef CONFIG_NO_HZ @@ -302,9 +306,9 @@ static void rcu_print_task_stall(struct rcu_node *rnp); #endif /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */ static void rcu_preempt_check_blocked_tasks(struct rcu_node *rnp); #ifdef CONFIG_HOTPLUG_CPU -static void rcu_preempt_offline_tasks(struct rcu_state *rsp, - struct rcu_node *rnp, - struct rcu_data *rdp); +static int rcu_preempt_offline_tasks(struct rcu_state *rsp, + struct rcu_node *rnp, + struct rcu_data *rdp); static void rcu_preempt_offline_cpu(int cpu); #endif /* #ifdef CONFIG_HOTPLUG_CPU */ static void rcu_preempt_check_callbacks(int cpu); diff --git a/kernel/rcutree_plugin.h b/kernel/rcutree_plugin.h index c0cb783..ef2a58c 100644 --- a/kernel/rcutree_plugin.h +++ b/kernel/rcutree_plugin.h @@ -304,21 +304,25 @@ static void rcu_preempt_check_blocked_tasks(struct rcu_node *rnp) * parent is to remove the need for rcu_read_unlock_special() to * make more than two attempts to acquire the target rcu_node's lock. * + * Returns 1 if there was previously a task blocking the current grace + * period on the specified rcu_node structure. + * * The caller must hold rnp->lock with irqs disabled. */ -static void rcu_preempt_offline_tasks(struct rcu_state *rsp, - struct rcu_node *rnp, - struct rcu_data *rdp) +static int rcu_preempt_offline_tasks(struct rcu_state *rsp, + struct rcu_node *rnp, + struct rcu_data *rdp) { int i; struct list_head *lp; struct list_head *lp_root; + int retval = rcu_preempted_readers(rnp); struct rcu_node *rnp_root = rcu_get_root(rsp); struct task_struct *tp; if (rnp == rnp_root) { WARN_ONCE(1, "Last CPU thought to be offlined?"); - return; /* Shouldn't happen: at least one CPU online. */ + return 0; /* Shouldn't happen: at least one CPU online. */ } WARN_ON_ONCE(rnp != rdp->mynode && (!list_empty(&rnp->blocked_tasks[0]) || @@ -342,6 +346,8 @@ static void rcu_preempt_offline_tasks(struct rcu_state *rsp, spin_unlock(&rnp_root->lock); /* irqs remain disabled */ } } + + return retval; } /* @@ -393,6 +399,17 @@ void call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu)) EXPORT_SYMBOL_GPL(call_rcu); /* + * Wait for an rcu-preempt grace period. We are supposed to expedite the + * grace period, but this is the crude slow compatability hack, so just + * invoke synchronize_rcu(). + */ +void synchronize_rcu_expedited(void) +{ + synchronize_rcu(); +} +EXPORT_SYMBOL_GPL(synchronize_rcu_expedited); + +/* * Check to see if there is any immediate preemptable-RCU-related work * to be done. */ @@ -521,12 +538,15 @@ static void rcu_preempt_check_blocked_tasks(struct rcu_node *rnp) /* * Because preemptable RCU does not exist, it never needs to migrate - * tasks that were blocked within RCU read-side critical sections. + * tasks that were blocked within RCU read-side critical sections, and + * such non-existent tasks cannot possibly have been blocking the current + * grace period. */ -static void rcu_preempt_offline_tasks(struct rcu_state *rsp, - struct rcu_node *rnp, - struct rcu_data *rdp) +static int rcu_preempt_offline_tasks(struct rcu_state *rsp, + struct rcu_node *rnp, + struct rcu_data *rdp) { + return 0; } /* @@ -565,6 +585,16 @@ void call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu)) EXPORT_SYMBOL_GPL(call_rcu); /* + * Wait for an rcu-preempt grace period, but make it happen quickly. + * But because preemptable RCU does not exist, map to rcu-sched. + */ +void synchronize_rcu_expedited(void) +{ + synchronize_sched_expedited(); +} +EXPORT_SYMBOL_GPL(synchronize_rcu_expedited); + +/* * Because preemptable RCU does not exist, it never has any work to do. */ static int rcu_preempt_pending(int cpu) diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index 4e777b4..c32c3e6 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -861,12 +861,21 @@ wakeup_preempt_entity(struct sched_entity *curr, struct sched_entity *se); static struct sched_entity *pick_next_entity(struct cfs_rq *cfs_rq) { struct sched_entity *se = __pick_next_entity(cfs_rq); + struct sched_entity *buddy; - if (cfs_rq->next && wakeup_preempt_entity(cfs_rq->next, se) < 1) - return cfs_rq->next; + if (cfs_rq->next) { + buddy = cfs_rq->next; + cfs_rq->next = NULL; + if (wakeup_preempt_entity(buddy, se) < 1) + return buddy; + } - if (cfs_rq->last && wakeup_preempt_entity(cfs_rq->last, se) < 1) - return cfs_rq->last; + if (cfs_rq->last) { + buddy = cfs_rq->last; + cfs_rq->last = NULL; + if (wakeup_preempt_entity(buddy, se) < 1) + return buddy; + } return se; } @@ -1654,16 +1663,6 @@ static struct task_struct *pick_next_task_fair(struct rq *rq) do { se = pick_next_entity(cfs_rq); - /* - * If se was a buddy, clear it so that it will have to earn - * the favour again. - * - * If se was not a buddy, clear the buddies because neither - * was elegible to run, let them earn it again. - * - * IOW. unconditionally clear buddies. - */ - __clear_buddies(cfs_rq, NULL); set_next_entity(cfs_rq, se); cfs_rq = group_cfs_rq(se); } while (cfs_rq); diff --git a/kernel/sys.c b/kernel/sys.c index 255475d..ce17760 100644 --- a/kernel/sys.c +++ b/kernel/sys.c @@ -1110,6 +1110,8 @@ SYSCALL_DEFINE0(setsid) err = session; out: write_unlock_irq(&tasklist_lock); + if (err > 0) + proc_sid_connector(group_leader); return err; } @@ -1546,24 +1548,37 @@ SYSCALL_DEFINE5(prctl, int, option, unsigned long, arg2, unsigned long, arg3, if (arg4 | arg5) return -EINVAL; switch (arg2) { - case 0: + case PR_MCE_KILL_CLEAR: if (arg3 != 0) return -EINVAL; current->flags &= ~PF_MCE_PROCESS; break; - case 1: + case PR_MCE_KILL_SET: current->flags |= PF_MCE_PROCESS; - if (arg3 != 0) + if (arg3 == PR_MCE_KILL_EARLY) current->flags |= PF_MCE_EARLY; - else + else if (arg3 == PR_MCE_KILL_LATE) current->flags &= ~PF_MCE_EARLY; + else if (arg3 == PR_MCE_KILL_DEFAULT) + current->flags &= + ~(PF_MCE_EARLY|PF_MCE_PROCESS); + else + return -EINVAL; break; default: return -EINVAL; } error = 0; break; - + case PR_MCE_KILL_GET: + if (arg2 | arg3 | arg4 | arg5) + return -EINVAL; + if (current->flags & PF_MCE_PROCESS) + error = (current->flags & PF_MCE_EARLY) ? + PR_MCE_KILL_EARLY : PR_MCE_KILL_LATE; + else + error = PR_MCE_KILL_DEFAULT; + break; default: error = -EINVAL; break; diff --git a/kernel/sysctl_check.c b/kernel/sysctl_check.c index b38423c..b6e7aaea 100644 --- a/kernel/sysctl_check.c +++ b/kernel/sysctl_check.c @@ -1521,7 +1521,7 @@ int sysctl_check_table(struct nsproxy *namespaces, struct ctl_table *table) if (!table->ctl_name && table->strategy) set_fail(&fail, table, "Strategy without ctl_name"); #endif -#ifdef CONFIG_PROC_FS +#ifdef CONFIG_PROC_SYSCTL if (table->procname && !table->proc_handler) set_fail(&fail, table, "No proc_handler"); #endif diff --git a/kernel/workqueue.c b/kernel/workqueue.c index 47cdd7e..1232814 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -685,21 +685,38 @@ EXPORT_SYMBOL(schedule_delayed_work_on); int schedule_on_each_cpu(work_func_t func) { int cpu; + int orig = -1; struct work_struct *works; works = alloc_percpu(struct work_struct); if (!works) return -ENOMEM; + /* + * when running in keventd don't schedule a work item on itself. + * Can just call directly because the work queue is already bound. + * This also is faster. + * Make this a generic parameter for other workqueues? + */ + if (current_is_keventd()) { + orig = raw_smp_processor_id(); + INIT_WORK(per_cpu_ptr(works, orig), func); + func(per_cpu_ptr(works, orig)); + } + get_online_cpus(); for_each_online_cpu(cpu) { struct work_struct *work = per_cpu_ptr(works, cpu); + if (cpu == orig) + continue; INIT_WORK(work, func); schedule_work_on(cpu, work); } - for_each_online_cpu(cpu) - flush_work(per_cpu_ptr(works, cpu)); + for_each_online_cpu(cpu) { + if (cpu != orig) + flush_work(per_cpu_ptr(works, cpu)); + } put_online_cpus(); free_percpu(works); return 0; @@ -67,7 +67,7 @@ config DISCONTIGMEM config SPARSEMEM def_bool y - depends on SPARSEMEM_MANUAL + depends on (!SELECT_MEMORY_MODEL && ARCH_SPARSEMEM_ENABLE) || SPARSEMEM_MANUAL config FLATMEM def_bool y diff --git a/mm/memory-failure.c b/mm/memory-failure.c index 729d4b1..dacc641 100644 --- a/mm/memory-failure.c +++ b/mm/memory-failure.c @@ -35,6 +35,7 @@ #include <linux/mm.h> #include <linux/page-flags.h> #include <linux/sched.h> +#include <linux/ksm.h> #include <linux/rmap.h> #include <linux/pagemap.h> #include <linux/swap.h> @@ -370,9 +371,6 @@ static int me_pagecache_clean(struct page *p, unsigned long pfn) int ret = FAILED; struct address_space *mapping; - if (!isolate_lru_page(p)) - page_cache_release(p); - /* * For anonymous pages we're done the only reference left * should be the one m_f() holds. @@ -498,30 +496,18 @@ static int me_pagecache_dirty(struct page *p, unsigned long pfn) */ static int me_swapcache_dirty(struct page *p, unsigned long pfn) { - int ret = FAILED; - ClearPageDirty(p); /* Trigger EIO in shmem: */ ClearPageUptodate(p); - if (!isolate_lru_page(p)) { - page_cache_release(p); - ret = DELAYED; - } - - return ret; + return DELAYED; } static int me_swapcache_clean(struct page *p, unsigned long pfn) { - int ret = FAILED; - - if (!isolate_lru_page(p)) { - page_cache_release(p); - ret = RECOVERED; - } delete_from_swap_cache(p); - return ret; + + return RECOVERED; } /* @@ -611,8 +597,6 @@ static struct page_state { { 0, 0, "unknown page state", me_unknown }, }; -#undef lru - static void action_result(unsigned long pfn, char *msg, int result) { struct page *page = NULL; @@ -629,13 +613,16 @@ static int page_action(struct page_state *ps, struct page *p, unsigned long pfn, int ref) { int result; + int count; result = ps->action(p, pfn); action_result(pfn, ps->msg, result); - if (page_count(p) != 1 + ref) + + count = page_count(p) - 1 - ref; + if (count != 0) printk(KERN_ERR "MCE %#lx: %s page still referenced by %d users\n", - pfn, ps->msg, page_count(p) - 1); + pfn, ps->msg, count); /* Could do more checks here if page looks ok */ /* @@ -661,12 +648,9 @@ static void hwpoison_user_mappings(struct page *p, unsigned long pfn, int i; int kill = 1; - if (PageReserved(p) || PageCompound(p) || PageSlab(p)) + if (PageReserved(p) || PageCompound(p) || PageSlab(p) || PageKsm(p)) return; - if (!PageLRU(p)) - lru_add_drain_all(); - /* * This check implies we don't kill processes if their pages * are in the swap cache early. Those are always late kills. @@ -738,6 +722,7 @@ static void hwpoison_user_mappings(struct page *p, unsigned long pfn, int __memory_failure(unsigned long pfn, int trapno, int ref) { + unsigned long lru_flag; struct page_state *ps; struct page *p; int res; @@ -775,6 +760,24 @@ int __memory_failure(unsigned long pfn, int trapno, int ref) } /* + * We ignore non-LRU pages for good reasons. + * - PG_locked is only well defined for LRU pages and a few others + * - to avoid races with __set_page_locked() + * - to avoid races with __SetPageSlab*() (and more non-atomic ops) + * The check (unnecessarily) ignores LRU pages being isolated and + * walked by the page reclaim code, however that's not a big loss. + */ + if (!PageLRU(p)) + lru_add_drain_all(); + lru_flag = p->flags & lru; + if (isolate_lru_page(p)) { + action_result(pfn, "non LRU", IGNORED); + put_page(p); + return -EBUSY; + } + page_cache_release(p); + + /* * Lock the page and wait for writeback to finish. * It's very difficult to mess with pages currently under IO * and in many cases impossible, so we just avoid it here. @@ -790,7 +793,7 @@ int __memory_failure(unsigned long pfn, int trapno, int ref) /* * Torn down by someone else? */ - if (PageLRU(p) && !PageSwapCache(p) && p->mapping == NULL) { + if ((lru_flag & lru) && !PageSwapCache(p) && p->mapping == NULL) { action_result(pfn, "already truncated LRU", IGNORED); res = 0; goto out; @@ -798,7 +801,7 @@ int __memory_failure(unsigned long pfn, int trapno, int ref) res = -EBUSY; for (ps = error_states;; ps++) { - if ((p->flags & ps->mask) == ps->res) { + if (((p->flags | lru_flag)& ps->mask) == ps->res) { res = page_action(ps, p, pfn, ref); break; } diff --git a/mm/memory.c b/mm/memory.c index 7e91b5f..6ab19dd 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -641,6 +641,7 @@ static int copy_pte_range(struct mm_struct *dst_mm, struct mm_struct *src_mm, pmd_t *dst_pmd, pmd_t *src_pmd, struct vm_area_struct *vma, unsigned long addr, unsigned long end) { + pte_t *orig_src_pte, *orig_dst_pte; pte_t *src_pte, *dst_pte; spinlock_t *src_ptl, *dst_ptl; int progress = 0; @@ -654,6 +655,8 @@ again: src_pte = pte_offset_map_nested(src_pmd, addr); src_ptl = pte_lockptr(src_mm, src_pmd); spin_lock_nested(src_ptl, SINGLE_DEPTH_NESTING); + orig_src_pte = src_pte; + orig_dst_pte = dst_pte; arch_enter_lazy_mmu_mode(); do { @@ -677,9 +680,9 @@ again: arch_leave_lazy_mmu_mode(); spin_unlock(src_ptl); - pte_unmap_nested(src_pte - 1); + pte_unmap_nested(orig_src_pte); add_mm_rss(dst_mm, rss[0], rss[1]); - pte_unmap_unlock(dst_pte - 1, dst_ptl); + pte_unmap_unlock(orig_dst_pte, dst_ptl); cond_resched(); if (addr != end) goto again; @@ -1820,10 +1823,10 @@ static int apply_to_pte_range(struct mm_struct *mm, pmd_t *pmd, token = pmd_pgtable(*pmd); do { - err = fn(pte, token, addr, data); + err = fn(pte++, token, addr, data); if (err) break; - } while (pte++, addr += PAGE_SIZE, addr != end); + } while (addr += PAGE_SIZE, addr != end); arch_leave_lazy_mmu_mode(); @@ -2539,7 +2542,7 @@ static int do_swap_page(struct mm_struct *mm, struct vm_area_struct *vma, } else if (PageHWPoison(page)) { ret = VM_FAULT_HWPOISON; delayacct_clear_flag(DELAYACCT_PF_SWAPIN); - goto out; + goto out_release; } lock_page(page); @@ -2611,6 +2614,7 @@ out_nomap: pte_unmap_unlock(page_table, ptl); out_page: unlock_page(page); +out_release: page_cache_release(page); return ret; } diff --git a/mm/mempolicy.c b/mm/mempolicy.c index 7dd9d9f..4545d59 100644 --- a/mm/mempolicy.c +++ b/mm/mempolicy.c @@ -1024,7 +1024,7 @@ static long do_mbind(unsigned long start, unsigned long len, err = migrate_prep(); if (err) - return err; + goto mpol_out; } { NODEMASK_SCRATCH(scratch); @@ -1039,10 +1039,9 @@ static long do_mbind(unsigned long start, unsigned long len, err = -ENOMEM; NODEMASK_SCRATCH_FREE(scratch); } - if (err) { - mpol_put(new); - return err; - } + if (err) + goto mpol_out; + vma = check_range(mm, start, end, nmask, flags | MPOL_MF_INVERT, &pagelist); @@ -1058,9 +1057,11 @@ static long do_mbind(unsigned long start, unsigned long len, if (!err && nr_failed && (flags & MPOL_MF_STRICT)) err = -EIO; - } + } else + putback_lru_pages(&pagelist); up_write(&mm->mmap_sem); + mpol_out: mpol_put(new); return err; } diff --git a/mm/page_alloc.c b/mm/page_alloc.c index bf72055..cdcedf6 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -2183,7 +2183,7 @@ void show_free_areas(void) printk("active_anon:%lu inactive_anon:%lu isolated_anon:%lu\n" " active_file:%lu inactive_file:%lu isolated_file:%lu\n" " unevictable:%lu" - " dirty:%lu writeback:%lu unstable:%lu buffer:%lu\n" + " dirty:%lu writeback:%lu unstable:%lu\n" " free:%lu slab_reclaimable:%lu slab_unreclaimable:%lu\n" " mapped:%lu shmem:%lu pagetables:%lu bounce:%lu\n", global_page_state(NR_ACTIVE_ANON), @@ -2196,7 +2196,6 @@ void show_free_areas(void) global_page_state(NR_FILE_DIRTY), global_page_state(NR_WRITEBACK), global_page_state(NR_UNSTABLE_NFS), - nr_blockdev_pages(), global_page_state(NR_FREE_PAGES), global_page_state(NR_SLAB_RECLAIMABLE), global_page_state(NR_SLAB_UNRECLAIMABLE), diff --git a/mm/vmscan.c b/mm/vmscan.c index 64e43889..777af57 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -544,6 +544,16 @@ redo: */ lru = LRU_UNEVICTABLE; add_page_to_unevictable_list(page); + /* + * When racing with an mlock clearing (page is + * unlocked), make sure that if the other thread does + * not observe our setting of PG_lru and fails + * isolation, we see PG_mlocked cleared below and move + * the page back to the evictable list. + * + * The other side is TestClearPageMlocked(). + */ + smp_mb(); } /* @@ -1088,7 +1098,7 @@ static unsigned long shrink_inactive_list(unsigned long max_scan, int lumpy_reclaim = 0; while (unlikely(too_many_isolated(zone, file, sc))) { - congestion_wait(WRITE, HZ/10); + congestion_wait(BLK_RW_ASYNC, HZ/10); /* We are about to die and free our memory. Return now. */ if (fatal_signal_pending(current)) @@ -1356,7 +1366,7 @@ static void shrink_active_list(unsigned long nr_pages, struct zone *zone, * IO, plus JVM can create lots of anon VM_EXEC pages, * so we ignore them here. */ - if ((vm_flags & VM_EXEC) && !PageAnon(page)) { + if ((vm_flags & VM_EXEC) && page_is_file_cache(page)) { list_add(&page->lru, &l_active); continue; } diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl index 87bbb8b..bc4114f 100755 --- a/scripts/checkpatch.pl +++ b/scripts/checkpatch.pl @@ -2,7 +2,7 @@ # (c) 2001, Dave Jones. <davej@redhat.com> (the file handling bit) # (c) 2005, Joel Schopp <jschopp@austin.ibm.com> (the ugly bit) # (c) 2007,2008, Andy Whitcroft <apw@uk.ibm.com> (new conditions, test suite) -# (c) 2008, Andy Whitcroft <apw@canonical.com> +# (c) 2008,2009, Andy Whitcroft <apw@canonical.com> # Licensed under the terms of the GNU GPL License version 2 use strict; @@ -10,7 +10,7 @@ use strict; my $P = $0; $P =~ s@.*/@@g; -my $V = '0.29'; +my $V = '0.30'; use Getopt::Long qw(:config no_auto_abbrev); @@ -130,7 +130,10 @@ if ($tree) { my $emitted_corrupt = 0; -our $Ident = qr{[A-Za-z_][A-Za-z\d_]*}; +our $Ident = qr{ + [A-Za-z_][A-Za-z\d_]* + (?:\s*\#\#\s*[A-Za-z_][A-Za-z\d_]*)* + }x; our $Storage = qr{extern|static|asmlinkage}; our $Sparse = qr{ __user| @@ -997,23 +1000,25 @@ sub annotate_values { sub possible { my ($possible, $line) = @_; - - print "CHECK<$possible> ($line)\n" if ($dbg_possible > 2); - if ($possible !~ /(?: + my $notPermitted = qr{(?: ^(?: $Modifier| $Storage| $Type| - DEFINE_\S+| + DEFINE_\S+ + )$| + ^(?: goto| return| case| else| asm|__asm__| do - )$| + )(?:\s|$)| ^(?:typedef|struct|enum)\b - )/x) { + )}x; + warn "CHECK<$possible> ($line)\n" if ($dbg_possible > 2); + if ($possible !~ $notPermitted) { # Check for modifiers. $possible =~ s/\s*$Storage\s*//g; $possible =~ s/\s*$Sparse\s*//g; @@ -1022,8 +1027,10 @@ sub possible { } elsif ($possible =~ /\s/) { $possible =~ s/\s*$Type\s*//g; for my $modifier (split(' ', $possible)) { - warn "MODIFIER: $modifier ($possible) ($line)\n" if ($dbg_possible); - push(@modifierList, $modifier); + if ($modifier !~ $notPermitted) { + warn "MODIFIER: $modifier ($possible) ($line)\n" if ($dbg_possible); + push(@modifierList, $modifier); + } } } else { @@ -1138,6 +1145,7 @@ sub process { # suppression flags my %suppress_ifbraces; my %suppress_whiletrailers; + my %suppress_export; # Pre-scan the patch sanitizing the lines. # Pre-scan the patch looking for any __setup documentation. @@ -1230,7 +1238,6 @@ sub process { $linenr++; my $rawline = $rawlines[$linenr - 1]; - my $hunk_line = ($realcnt != 0); #extract the line range in the file after the patch is applied if ($line=~/^\@\@ -\d+(?:,\d+)? \+(\d+)(,(\d+))? \@\@/) { @@ -1247,6 +1254,7 @@ sub process { %suppress_ifbraces = (); %suppress_whiletrailers = (); + %suppress_export = (); next; # track the line number as we move through the hunk, note that @@ -1270,6 +1278,8 @@ sub process { $realcnt--; } + my $hunk_line = ($realcnt != 0); + #make up the handle for any error we report on this line $prefix = "$filename:$realline: " if ($emacs && $file); $prefix = "$filename:$linenr: " if ($emacs && !$file); @@ -1420,13 +1430,22 @@ sub process { } # Check for potential 'bare' types - my ($stat, $cond, $line_nr_next, $remain_next, $off_next); + my ($stat, $cond, $line_nr_next, $remain_next, $off_next, + $realline_next); if ($realcnt && $line =~ /.\s*\S/) { ($stat, $cond, $line_nr_next, $remain_next, $off_next) = ctx_statement_block($linenr, $realcnt, 0); $stat =~ s/\n./\n /g; $cond =~ s/\n./\n /g; + # Find the real next line. + $realline_next = $line_nr_next; + if (defined $realline_next && + (!defined $lines[$realline_next - 1] || + substr($lines[$realline_next - 1], $off_next) =~ /^\s*$/)) { + $realline_next++; + } + my $s = $stat; $s =~ s/{.*$//s; @@ -1661,8 +1680,8 @@ sub process { } # check for initialisation to aggregates open brace on the next line - if ($prevline =~ /$Declare\s*$Ident\s*=\s*$/ && - $line =~ /^.\s*{/) { + if ($line =~ /^.\s*{/ && + $prevline =~ /(?:^|[^=])=\s*$/) { ERROR("that open brace { should be on the previous line\n" . $hereprev); } @@ -1687,21 +1706,40 @@ sub process { $line =~ s@//.*@@; $opline =~ s@//.*@@; -#EXPORT_SYMBOL should immediately follow its function closing }. - if (($line =~ /EXPORT_SYMBOL.*\((.*)\)/) || - ($line =~ /EXPORT_UNUSED_SYMBOL.*\((.*)\)/)) { +# EXPORT_SYMBOL should immediately follow the thing it is exporting, consider +# the whole statement. +#print "APW <$lines[$realline_next - 1]>\n"; + if (defined $realline_next && + exists $lines[$realline_next - 1] && + !defined $suppress_export{$realline_next} && + ($lines[$realline_next - 1] =~ /EXPORT_SYMBOL.*\((.*)\)/ || + $lines[$realline_next - 1] =~ /EXPORT_UNUSED_SYMBOL.*\((.*)\)/)) { my $name = $1; - if ($prevline !~ /(?: - ^.}| + if ($stat !~ /(?: + \n.}\s*$| ^.DEFINE_$Ident\(\Q$name\E\)| ^.DECLARE_$Ident\(\Q$name\E\)| ^.LIST_HEAD\(\Q$name\E\)| - ^.$Type\s*\(\s*\*\s*\Q$name\E\s*\)\s*\(| - \b\Q$name\E(?:\s+$Attribute)?\s*(?:;|=|\[) + ^.(?:$Storage\s+)?$Type\s*\(\s*\*\s*\Q$name\E\s*\)\s*\(| + \b\Q$name\E(?:\s+$Attribute)*\s*(?:;|=|\[|\() )/x) { - WARN("EXPORT_SYMBOL(foo); should immediately follow its function/variable\n" . $herecurr); +#print "FOO A<$lines[$realline_next - 1]> stat<$stat> name<$name>\n"; + $suppress_export{$realline_next} = 2; + } else { + $suppress_export{$realline_next} = 1; } } + if (!defined $suppress_export{$linenr} && + $prevline =~ /^.\s*$/ && + ($line =~ /EXPORT_SYMBOL.*\((.*)\)/ || + $line =~ /EXPORT_UNUSED_SYMBOL.*\((.*)\)/)) { +#print "FOO B <$lines[$linenr - 1]>\n"; + $suppress_export{$linenr} = 2; + } + if (defined $suppress_export{$linenr} && + $suppress_export{$linenr} == 2) { + WARN("EXPORT_SYMBOL(foo); should immediately follow its function/variable\n" . $herecurr); + } # check for external initialisers. if ($line =~ /^.$Type\s*$Ident\s*(?:\s+$Modifier)*\s*=\s*(0|NULL|false)\s*;/) { diff --git a/scripts/get_maintainer.pl b/scripts/get_maintainer.pl index cdb44b6..102b766 100755 --- a/scripts/get_maintainer.pl +++ b/scripts/get_maintainer.pl @@ -13,7 +13,7 @@ use strict; my $P = $0; -my $V = '0.20'; +my $V = '0.21'; use Getopt::Long qw(:config no_auto_abbrev); @@ -37,6 +37,7 @@ my $scm = 0; my $web = 0; my $subsystem = 0; my $status = 0; +my $keywords = 1; my $from_filename = 0; my $pattern_depth = 0; my $version = 0; @@ -84,6 +85,7 @@ if (!GetOptions( 'scm!' => \$scm, 'web!' => \$web, 'pattern-depth=i' => \$pattern_depth, + 'k|keywords!' => \$keywords, 'f|file' => \$from_filename, 'v|version' => \$version, 'h|help' => \$help, @@ -132,6 +134,8 @@ if (!top_of_kernel_tree($lk_path)) { ## Read MAINTAINERS for type/value pairs my @typevalue = (); +my %keyword_hash; + open(MAINT, "<${lk_path}MAINTAINERS") || die "$P: Can't open MAINTAINERS\n"; while (<MAINT>) { my $line = $_; @@ -149,6 +153,8 @@ while (<MAINT>) { if ((-d $value)) { $value =~ s@([^/])$@$1/@; } + } elsif ($type eq "K") { + $keyword_hash{@typevalue} = $value; } push(@typevalue, "$type:$value"); } elsif (!/^(\s)*$/) { @@ -188,6 +194,7 @@ if ($email_remove_duplicates) { my @files = (); my @range = (); +my @keyword_tvi = (); foreach my $file (@ARGV) { ##if $file is a directory and it lacks a trailing slash, add one @@ -198,11 +205,24 @@ foreach my $file (@ARGV) { } if ($from_filename) { push(@files, $file); + if (-f $file && $keywords) { + open(FILE, "<$file") or die "$P: Can't open ${file}\n"; + while (<FILE>) { + my $patch_line = $_; + foreach my $line (keys %keyword_hash) { + if ($patch_line =~ m/^.*$keyword_hash{$line}/x) { + push(@keyword_tvi, $line); + } + } + } + close(FILE); + } } else { my $file_cnt = @files; my $lastfile; open(PATCH, "<$file") or die "$P: Can't open ${file}\n"; while (<PATCH>) { + my $patch_line = $_; if (m/^\+\+\+\s+(\S+)/) { my $filename = $1; $filename =~ s@^[^/]*/@@; @@ -213,6 +233,12 @@ foreach my $file (@ARGV) { if ($email_git_blame) { push(@range, "$lastfile:$1:$2"); } + } elsif ($keywords) { + foreach my $line (keys %keyword_hash) { + if ($patch_line =~ m/^[+-].*$keyword_hash{$line}/x) { + push(@keyword_tvi, $line); + } + } } } close(PATCH); @@ -286,6 +312,13 @@ foreach my $file (@files) { } } +if ($keywords) { + @keyword_tvi = sort_and_uniq(@keyword_tvi); + foreach my $line (@keyword_tvi) { + add_categories($line); + } +} + if ($email) { foreach my $chief (@penguin_chief) { if ($chief =~ m/^(.*):(.*)/) { @@ -384,6 +417,7 @@ Output type options: Other options: --pattern-depth => Number of pattern directory traversals (default: 0 (all)) + --keywords => scan patch for keywords (default: 1 (on)) --version => show version --help => show this help information @@ -486,7 +520,6 @@ sub format_email { } sub find_starting_index { - my ($index) = @_; while ($index > 0) { diff --git a/tools/perf/builtin-timechart.c b/tools/perf/builtin-timechart.c index 702d8fe..e8a510d9 100644 --- a/tools/perf/builtin-timechart.c +++ b/tools/perf/builtin-timechart.c @@ -765,19 +765,40 @@ static void draw_wakeups(void) if (c->Y && c->start_time <= we->time && c->end_time >= we->time) { if (p->pid == we->waker) { from = c->Y; - task_from = c->comm; + task_from = strdup(c->comm); } if (p->pid == we->wakee) { to = c->Y; - task_to = c->comm; + task_to = strdup(c->comm); } } c = c->next; } + c = p->all; + while (c) { + if (p->pid == we->waker && !from) { + from = c->Y; + task_from = strdup(c->comm); + } + if (p->pid == we->wakee && !to) { + to = c->Y; + task_to = strdup(c->comm); + } + c = c->next; + } } p = p->next; } + if (!task_from) { + task_from = malloc(40); + sprintf(task_from, "[%i]", we->waker); + } + if (!task_to) { + task_to = malloc(40); + sprintf(task_to, "[%i]", we->wakee); + } + if (we->waker == -1) svg_interrupt(we->time, to); else if (from && to && abs(from - to) == 1) @@ -785,6 +806,9 @@ static void draw_wakeups(void) else svg_partial_wakeline(we->time, from, task_from, to, task_to); we = we->next; + + free(task_from); + free(task_to); } } diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c index 37512e9..a1b1d10 100644 --- a/tools/perf/builtin-top.c +++ b/tools/perf/builtin-top.c @@ -686,6 +686,8 @@ static void handle_keypress(int c) switch (c) { case 'd': prompt_integer(&delay_secs, "Enter display delay"); + if (delay_secs < 1) + delay_secs = 1; break; case 'e': prompt_integer(&print_entries, "Enter display entries (lines)"); diff --git a/tools/perf/util/PERF-VERSION-GEN b/tools/perf/util/PERF-VERSION-GEN index c561d15..54552a0 100755 --- a/tools/perf/util/PERF-VERSION-GEN +++ b/tools/perf/util/PERF-VERSION-GEN @@ -1,7 +1,7 @@ #!/bin/sh GVF=PERF-VERSION-FILE -DEF_VER=v0.0.1.PERF +DEF_VER=v0.0.2.PERF LF=' ' diff --git a/tools/perf/util/svghelper.c b/tools/perf/util/svghelper.c index 856655d..b3637db 100644 --- a/tools/perf/util/svghelper.c +++ b/tools/perf/util/svghelper.c @@ -103,7 +103,7 @@ void open_svg(const char *filename, int cpus, int rows, u64 start, u64 end) fprintf(svgfile, " rect.process2 { fill:rgb(180,180,180); fill-opacity:0.9; stroke-width:0; stroke:rgb( 0, 0, 0); } \n"); fprintf(svgfile, " rect.sample { fill:rgb( 0, 0,255); fill-opacity:0.8; stroke-width:0; stroke:rgb( 0, 0, 0); } \n"); fprintf(svgfile, " rect.blocked { fill:rgb(255, 0, 0); fill-opacity:0.5; stroke-width:0; stroke:rgb( 0, 0, 0); } \n"); - fprintf(svgfile, " rect.waiting { fill:rgb(214,214, 0); fill-opacity:0.3; stroke-width:0; stroke:rgb( 0, 0, 0); } \n"); + fprintf(svgfile, " rect.waiting { fill:rgb(224,214, 0); fill-opacity:0.8; stroke-width:0; stroke:rgb( 0, 0, 0); } \n"); fprintf(svgfile, " rect.WAITING { fill:rgb(255,214, 48); fill-opacity:0.6; stroke-width:0; stroke:rgb( 0, 0, 0); } \n"); fprintf(svgfile, " rect.cpu { fill:rgb(192,192,192); fill-opacity:0.2; stroke-width:0.5; stroke:rgb(128,128,128); } \n"); fprintf(svgfile, " rect.pstate { fill:rgb(128,128,128); fill-opacity:0.8; stroke-width:0; } \n"); |
