summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/usb/dwc3/Kconfig1
-rw-r--r--drivers/usb/dwc3/dwc3-pci.c2
-rw-r--r--drivers/usb/dwc3/gadget.c6
-rw-r--r--drivers/usb/gadget/cdc2.c19
-rw-r--r--drivers/usb/gadget/dummy_hcd.c7
-rw-r--r--drivers/usb/gadget/f_ecm.c2
-rw-r--r--drivers/usb/gadget/f_eem.c2
-rw-r--r--drivers/usb/gadget/f_mass_storage.c2
-rw-r--r--drivers/usb/gadget/fotg210-udc.c2
-rw-r--r--drivers/usb/gadget/fusb300_udc.c2
-rw-r--r--drivers/usb/gadget/multi.c8
-rw-r--r--drivers/usb/gadget/mv_u3d_core.c3
-rw-r--r--drivers/usb/gadget/s3c-hsotg.c13
-rw-r--r--drivers/usb/host/ehci-fsl.c2
-rw-r--r--drivers/usb/host/ehci-grlib.c2
-rw-r--r--drivers/usb/host/ehci-hcd.c2
-rw-r--r--drivers/usb/host/ehci-mv.c2
-rw-r--r--drivers/usb/host/ehci-octeon.c2
-rw-r--r--drivers/usb/host/ehci-pmcmsp.c2
-rw-r--r--drivers/usb/host/ehci-ppc-of.c2
-rw-r--r--drivers/usb/host/ehci-ps3.c2
-rw-r--r--drivers/usb/host/ehci-q.c5
-rw-r--r--drivers/usb/host/ehci-sead3.c2
-rw-r--r--drivers/usb/host/ehci-sh.c2
-rw-r--r--drivers/usb/host/ehci-tilegx.c2
-rw-r--r--drivers/usb/host/ehci-w90x900.c2
-rw-r--r--drivers/usb/host/ehci-xilinx-of.c2
-rw-r--r--drivers/usb/host/fsl-mph-dr-of.c6
-rw-r--r--drivers/usb/phy/phy-omap-usb3.c2
-rw-r--r--drivers/usb/serial/Kconfig2
-rw-r--r--drivers/usb/serial/pl2303.c43
31 files changed, 81 insertions, 72 deletions
diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
index b870872..70fc430 100644
--- a/drivers/usb/dwc3/Kconfig
+++ b/drivers/usb/dwc3/Kconfig
@@ -1,7 +1,6 @@
config USB_DWC3
tristate "DesignWare USB3 DRD Core Support"
depends on (USB || USB_GADGET) && HAS_DMA
- depends on EXTCON
select USB_XHCI_PLATFORM if USB_SUPPORT && USB_XHCI_HCD
help
Say Y or M here if your system has a Dual Role SuperSpeed
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index 9b13812..997ebe4 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -28,6 +28,7 @@
/* FIXME define these in <linux/pci_ids.h> */
#define PCI_VENDOR_ID_SYNOPSYS 0x16c3
#define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3 0xabcd
+#define PCI_DEVICE_ID_INTEL_BYT 0x0f37
struct dwc3_pci {
struct device *dev;
@@ -187,6 +188,7 @@ static DEFINE_PCI_DEVICE_TABLE(dwc3_pci_id_table) = {
PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS,
PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3),
},
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BYT), },
{ } /* Terminating Entry */
};
MODULE_DEVICE_TABLE(pci, dwc3_pci_id_table);
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index f168eae..5452c0f 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2611,15 +2611,13 @@ int dwc3_gadget_init(struct dwc3 *dwc)
ret = usb_add_gadget_udc(dwc->dev, &dwc->gadget);
if (ret) {
dev_err(dwc->dev, "failed to register udc\n");
- goto err5;
+ goto err4;
}
return 0;
-err5:
- dwc3_gadget_free_endpoints(dwc);
-
err4:
+ dwc3_gadget_free_endpoints(dwc);
dma_free_coherent(dwc->dev, DWC3_EP0_BOUNCE_SIZE,
dwc->ep0_bounce, dwc->ep0_bounce_addr);
diff --git a/drivers/usb/gadget/cdc2.c b/drivers/usb/gadget/cdc2.c
index 5a5acf2..e126b6b 100644
--- a/drivers/usb/gadget/cdc2.c
+++ b/drivers/usb/gadget/cdc2.c
@@ -113,12 +113,6 @@ static int __init cdc_do_config(struct usb_configuration *c)
c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
}
- fi_ecm = usb_get_function_instance("ecm");
- if (IS_ERR(fi_ecm)) {
- status = PTR_ERR(fi_ecm);
- goto err_func_ecm;
- }
-
f_ecm = usb_get_function(fi_ecm);
if (IS_ERR(f_ecm)) {
status = PTR_ERR(f_ecm);
@@ -129,35 +123,24 @@ static int __init cdc_do_config(struct usb_configuration *c)
if (status)
goto err_add_ecm;
- fi_serial = usb_get_function_instance("acm");
- if (IS_ERR(fi_serial)) {
- status = PTR_ERR(fi_serial);
- goto err_get_acm;
- }
-
f_acm = usb_get_function(fi_serial);
if (IS_ERR(f_acm)) {
status = PTR_ERR(f_acm);
- goto err_func_acm;
+ goto err_get_acm;
}
status = usb_add_function(c, f_acm);
if (status)
goto err_add_acm;
-
return 0;
err_add_acm:
usb_put_function(f_acm);
-err_func_acm:
- usb_put_function_instance(fi_serial);
err_get_acm:
usb_remove_function(c, f_ecm);
err_add_ecm:
usb_put_function(f_ecm);
err_get_ecm:
- usb_put_function_instance(fi_ecm);
-err_func_ecm:
return status;
}
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index 06ecd08..b8a2376 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -923,8 +923,9 @@ static int dummy_udc_stop(struct usb_gadget *g,
struct dummy_hcd *dum_hcd = gadget_to_dummy_hcd(g);
struct dummy *dum = dum_hcd->dum;
- dev_dbg(udc_dev(dum), "unregister gadget driver '%s'\n",
- driver->driver.name);
+ if (driver)
+ dev_dbg(udc_dev(dum), "unregister gadget driver '%s'\n",
+ driver->driver.name);
dum->driver = NULL;
@@ -1000,8 +1001,8 @@ static int dummy_udc_remove(struct platform_device *pdev)
{
struct dummy *dum = platform_get_drvdata(pdev);
- usb_del_gadget_udc(&dum->gadget);
device_remove_file(&dum->gadget.dev, &dev_attr_function);
+ usb_del_gadget_udc(&dum->gadget);
return 0;
}
diff --git a/drivers/usb/gadget/f_ecm.c b/drivers/usb/gadget/f_ecm.c
index edab45d..8d9e6f7 100644
--- a/drivers/usb/gadget/f_ecm.c
+++ b/drivers/usb/gadget/f_ecm.c
@@ -995,7 +995,7 @@ static void ecm_unbind(struct usb_configuration *c, struct usb_function *f)
usb_ep_free_request(ecm->notify, ecm->notify_req);
}
-struct usb_function *ecm_alloc(struct usb_function_instance *fi)
+static struct usb_function *ecm_alloc(struct usb_function_instance *fi)
{
struct f_ecm *ecm;
struct f_ecm_opts *opts;
diff --git a/drivers/usb/gadget/f_eem.c b/drivers/usb/gadget/f_eem.c
index d00392d..d61c11d 100644
--- a/drivers/usb/gadget/f_eem.c
+++ b/drivers/usb/gadget/f_eem.c
@@ -624,7 +624,7 @@ static void eem_unbind(struct usb_configuration *c, struct usb_function *f)
usb_free_all_descriptors(f);
}
-struct usb_function *eem_alloc(struct usb_function_instance *fi)
+static struct usb_function *eem_alloc(struct usb_function_instance *fi)
{
struct f_eem *eem;
struct f_eem_opts *opts;
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index 313b835..a01d7d3 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -2260,10 +2260,12 @@ reset:
/* Disable the endpoints */
if (fsg->bulk_in_enabled) {
usb_ep_disable(fsg->bulk_in);
+ fsg->bulk_in->driver_data = NULL;
fsg->bulk_in_enabled = 0;
}
if (fsg->bulk_out_enabled) {
usb_ep_disable(fsg->bulk_out);
+ fsg->bulk_out->driver_data = NULL;
fsg->bulk_out_enabled = 0;
}
diff --git a/drivers/usb/gadget/fotg210-udc.c b/drivers/usb/gadget/fotg210-udc.c
index 32db2ee..bbbfd19 100644
--- a/drivers/usb/gadget/fotg210-udc.c
+++ b/drivers/usb/gadget/fotg210-udc.c
@@ -1214,6 +1214,6 @@ static struct platform_driver fotg210_driver = {
module_platform_driver(fotg210_driver);
-MODULE_AUTHOR("Yuan-Hsin Chen <yhchen@faraday-tech.com>");
+MODULE_AUTHOR("Yuan-Hsin Chen, Feng-Hsin Chiang <john453@faraday-tech.com>");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/gadget/fusb300_udc.c b/drivers/usb/gadget/fusb300_udc.c
index f1dd6da..b278abe 100644
--- a/drivers/usb/gadget/fusb300_udc.c
+++ b/drivers/usb/gadget/fusb300_udc.c
@@ -22,7 +22,7 @@
MODULE_DESCRIPTION("FUSB300 USB gadget driver");
MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Yuan Hsin Chen <yhchen@faraday-tech.com>");
+MODULE_AUTHOR("Yuan-Hsin Chen, Feng-Hsin Chiang <john453@faraday-tech.com>");
MODULE_ALIAS("platform:fusb300_udc");
#define DRIVER_VERSION "20 October 2010"
diff --git a/drivers/usb/gadget/multi.c b/drivers/usb/gadget/multi.c
index 2a1ebef..2339325 100644
--- a/drivers/usb/gadget/multi.c
+++ b/drivers/usb/gadget/multi.c
@@ -179,7 +179,7 @@ err_conf:
return ret;
}
-static int rndis_config_register(struct usb_composite_dev *cdev)
+static __ref int rndis_config_register(struct usb_composite_dev *cdev)
{
static struct usb_configuration config = {
.bConfigurationValue = MULTI_RNDIS_CONFIG_NUM,
@@ -194,7 +194,7 @@ static int rndis_config_register(struct usb_composite_dev *cdev)
#else
-static int rndis_config_register(struct usb_composite_dev *cdev)
+static __ref int rndis_config_register(struct usb_composite_dev *cdev)
{
return 0;
}
@@ -241,7 +241,7 @@ err_conf:
return ret;
}
-static int cdc_config_register(struct usb_composite_dev *cdev)
+static __ref int cdc_config_register(struct usb_composite_dev *cdev)
{
static struct usb_configuration config = {
.bConfigurationValue = MULTI_CDC_CONFIG_NUM,
@@ -256,7 +256,7 @@ static int cdc_config_register(struct usb_composite_dev *cdev)
#else
-static int cdc_config_register(struct usb_composite_dev *cdev)
+static __ref int cdc_config_register(struct usb_composite_dev *cdev)
{
return 0;
}
diff --git a/drivers/usb/gadget/mv_u3d_core.c b/drivers/usb/gadget/mv_u3d_core.c
index bbb6e98..561b30e 100644
--- a/drivers/usb/gadget/mv_u3d_core.c
+++ b/drivers/usb/gadget/mv_u3d_core.c
@@ -645,6 +645,7 @@ static int mv_u3d_ep_disable(struct usb_ep *_ep)
struct mv_u3d_ep *ep;
struct mv_u3d_ep_context *ep_context;
u32 epxcr, direction;
+ unsigned long flags;
if (!_ep)
return -EINVAL;
@@ -661,7 +662,9 @@ static int mv_u3d_ep_disable(struct usb_ep *_ep)
direction = mv_u3d_ep_dir(ep);
/* nuke all pending requests (does flush) */
+ spin_lock_irqsave(&u3d->lock, flags);
mv_u3d_nuke(ep, -ESHUTDOWN);
+ spin_unlock_irqrestore(&u3d->lock, flags);
/* Disable the endpoint for Rx or Tx and reset the endpoint type */
if (direction == MV_U3D_EP_DIR_OUT) {
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index d69b36a..6bddf1a 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -2475,8 +2475,6 @@ irq_retry:
if (gintsts & GINTSTS_ErlySusp) {
dev_dbg(hsotg->dev, "GINTSTS_ErlySusp\n");
writel(GINTSTS_ErlySusp, hsotg->regs + GINTSTS);
-
- s3c_hsotg_disconnect(hsotg);
}
/*
@@ -2962,9 +2960,6 @@ static int s3c_hsotg_udc_stop(struct usb_gadget *gadget,
if (!hsotg)
return -ENODEV;
- if (!driver || driver != hsotg->driver || !driver->unbind)
- return -EINVAL;
-
/* all endpoints should be shutdown */
for (ep = 0; ep < hsotg->num_of_eps; ep++)
s3c_hsotg_ep_disable(&hsotg->eps[ep].ep);
@@ -2972,15 +2967,15 @@ static int s3c_hsotg_udc_stop(struct usb_gadget *gadget,
spin_lock_irqsave(&hsotg->lock, flags);
s3c_hsotg_phy_disable(hsotg);
- regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), hsotg->supplies);
- hsotg->driver = NULL;
+ if (!driver)
+ hsotg->driver = NULL;
+
hsotg->gadget.speed = USB_SPEED_UNKNOWN;
spin_unlock_irqrestore(&hsotg->lock, flags);
- dev_info(hsotg->dev, "unregistered gadget driver '%s'\n",
- driver->driver.name);
+ regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), hsotg->supplies);
return 0;
}
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index 947b009..4449f56 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -669,7 +669,7 @@ static const struct hc_driver ehci_fsl_hc_driver = {
* generic hardware linkage
*/
.irq = ehci_irq,
- .flags = HCD_USB2 | HCD_MEMORY | HCD_BH,
+ .flags = HCD_USB2 | HCD_MEMORY,
/*
* basic lifecycle operations
diff --git a/drivers/usb/host/ehci-grlib.c b/drivers/usb/host/ehci-grlib.c
index b52a66c..83ab51a 100644
--- a/drivers/usb/host/ehci-grlib.c
+++ b/drivers/usb/host/ehci-grlib.c
@@ -43,7 +43,7 @@ static const struct hc_driver ehci_grlib_hc_driver = {
* generic hardware linkage
*/
.irq = ehci_irq,
- .flags = HCD_MEMORY | HCD_USB2 | HCD_BH,
+ .flags = HCD_MEMORY | HCD_USB2,
/*
* basic lifecycle operations
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 5d6022f..86ab9fd 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1158,7 +1158,7 @@ static const struct hc_driver ehci_hc_driver = {
* generic hardware linkage
*/
.irq = ehci_irq,
- .flags = HCD_MEMORY | HCD_USB2 | HCD_BH,
+ .flags = HCD_MEMORY | HCD_USB2,
/*
* basic lifecycle operations
diff --git a/drivers/usb/host/ehci-mv.c b/drivers/usb/host/ehci-mv.c
index 417c10d..35cdbd8 100644
--- a/drivers/usb/host/ehci-mv.c
+++ b/drivers/usb/host/ehci-mv.c
@@ -96,7 +96,7 @@ static const struct hc_driver mv_ehci_hc_driver = {
* generic hardware linkage
*/
.irq = ehci_irq,
- .flags = HCD_MEMORY | HCD_USB2 | HCD_BH,
+ .flags = HCD_MEMORY | HCD_USB2,
/*
* basic lifecycle operations
diff --git a/drivers/usb/host/ehci-octeon.c b/drivers/usb/host/ehci-octeon.c
index ab0397e..45cc001 100644
--- a/drivers/usb/host/ehci-octeon.c
+++ b/drivers/usb/host/ehci-octeon.c
@@ -51,7 +51,7 @@ static const struct hc_driver ehci_octeon_hc_driver = {
* generic hardware linkage
*/
.irq = ehci_irq,
- .flags = HCD_MEMORY | HCD_USB2 | HCD_BH,
+ .flags = HCD_MEMORY | HCD_USB2,
/*
* basic lifecycle operations
diff --git a/drivers/usb/host/ehci-pmcmsp.c b/drivers/usb/host/ehci-pmcmsp.c
index 893b707..601e208 100644
--- a/drivers/usb/host/ehci-pmcmsp.c
+++ b/drivers/usb/host/ehci-pmcmsp.c
@@ -286,7 +286,7 @@ static const struct hc_driver ehci_msp_hc_driver = {
#else
.irq = ehci_irq,
#endif
- .flags = HCD_MEMORY | HCD_USB2 | HCD_BH,
+ .flags = HCD_MEMORY | HCD_USB2,
/*
* basic lifecycle operations
diff --git a/drivers/usb/host/ehci-ppc-of.c b/drivers/usb/host/ehci-ppc-of.c
index 6cc5567..932293f 100644
--- a/drivers/usb/host/ehci-ppc-of.c
+++ b/drivers/usb/host/ehci-ppc-of.c
@@ -28,7 +28,7 @@ static const struct hc_driver ehci_ppc_of_hc_driver = {
* generic hardware linkage
*/
.irq = ehci_irq,
- .flags = HCD_MEMORY | HCD_USB2 | HCD_BH,
+ .flags = HCD_MEMORY | HCD_USB2,
/*
* basic lifecycle operations
diff --git a/drivers/usb/host/ehci-ps3.c b/drivers/usb/host/ehci-ps3.c
index 8188542..fd98377 100644
--- a/drivers/usb/host/ehci-ps3.c
+++ b/drivers/usb/host/ehci-ps3.c
@@ -71,7 +71,7 @@ static const struct hc_driver ps3_ehci_hc_driver = {
.product_desc = "PS3 EHCI Host Controller",
.hcd_priv_size = sizeof(struct ehci_hcd),
.irq = ehci_irq,
- .flags = HCD_MEMORY | HCD_USB2 | HCD_BH,
+ .flags = HCD_MEMORY | HCD_USB2,
.reset = ps3_ehci_hc_reset,
.start = ehci_run,
.stop = ehci_stop,
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index e321804..a7f776a 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -247,6 +247,8 @@ static int qtd_copy_status (
static void
ehci_urb_done(struct ehci_hcd *ehci, struct urb *urb, int status)
+__releases(ehci->lock)
+__acquires(ehci->lock)
{
if (usb_pipetype(urb->pipe) == PIPE_INTERRUPT) {
/* ... update hc-wide periodic stats */
@@ -272,8 +274,11 @@ ehci_urb_done(struct ehci_hcd *ehci, struct urb *urb, int status)
urb->actual_length, urb->transfer_buffer_length);
#endif
+ /* complete() can reenter this HCD */
usb_hcd_unlink_urb_from_ep(ehci_to_hcd(ehci), urb);
+ spin_unlock (&ehci->lock);
usb_hcd_giveback_urb(ehci_to_hcd(ehci), urb, status);
+ spin_lock (&ehci->lock);
}
static int qh_schedule (struct ehci_hcd *ehci, struct ehci_qh *qh);
diff --git a/drivers/usb/host/ehci-sead3.c b/drivers/usb/host/ehci-sead3.c
index 8a73449..b2de52d 100644
--- a/drivers/usb/host/ehci-sead3.c
+++ b/drivers/usb/host/ehci-sead3.c
@@ -55,7 +55,7 @@ const struct hc_driver ehci_sead3_hc_driver = {
* generic hardware linkage
*/
.irq = ehci_irq,
- .flags = HCD_MEMORY | HCD_USB2 | HCD_BH,
+ .flags = HCD_MEMORY | HCD_USB2,
/*
* basic lifecycle operations
diff --git a/drivers/usb/host/ehci-sh.c b/drivers/usb/host/ehci-sh.c
index dc899eb..93e59a1 100644
--- a/drivers/usb/host/ehci-sh.c
+++ b/drivers/usb/host/ehci-sh.c
@@ -36,7 +36,7 @@ static const struct hc_driver ehci_sh_hc_driver = {
* generic hardware linkage
*/
.irq = ehci_irq,
- .flags = HCD_USB2 | HCD_MEMORY | HCD_BH,
+ .flags = HCD_USB2 | HCD_MEMORY,
/*
* basic lifecycle operations
diff --git a/drivers/usb/host/ehci-tilegx.c b/drivers/usb/host/ehci-tilegx.c
index 67026ff..cca4be9 100644
--- a/drivers/usb/host/ehci-tilegx.c
+++ b/drivers/usb/host/ehci-tilegx.c
@@ -61,7 +61,7 @@ static const struct hc_driver ehci_tilegx_hc_driver = {
* Generic hardware linkage.
*/
.irq = ehci_irq,
- .flags = HCD_MEMORY | HCD_USB2 | HCD_BH,
+ .flags = HCD_MEMORY | HCD_USB2,
/*
* Basic lifecycle operations.
diff --git a/drivers/usb/host/ehci-w90x900.c b/drivers/usb/host/ehci-w90x900.c
index 1c370df..59e0e24 100644
--- a/drivers/usb/host/ehci-w90x900.c
+++ b/drivers/usb/host/ehci-w90x900.c
@@ -108,7 +108,7 @@ static const struct hc_driver ehci_w90x900_hc_driver = {
* generic hardware linkage
*/
.irq = ehci_irq,
- .flags = HCD_USB2|HCD_MEMORY|HCD_BH,
+ .flags = HCD_USB2|HCD_MEMORY,
/*
* basic lifecycle operations
diff --git a/drivers/usb/host/ehci-xilinx-of.c b/drivers/usb/host/ehci-xilinx-of.c
index 95979f9..eba962e 100644
--- a/drivers/usb/host/ehci-xilinx-of.c
+++ b/drivers/usb/host/ehci-xilinx-of.c
@@ -79,7 +79,7 @@ static const struct hc_driver ehci_xilinx_of_hc_driver = {
* generic hardware linkage
*/
.irq = ehci_irq,
- .flags = HCD_MEMORY | HCD_USB2 | HCD_BH,
+ .flags = HCD_MEMORY | HCD_USB2,
/*
* basic lifecycle operations
diff --git a/drivers/usb/host/fsl-mph-dr-of.c b/drivers/usb/host/fsl-mph-dr-of.c
index 9e0020d..abd5050 100644
--- a/drivers/usb/host/fsl-mph-dr-of.c
+++ b/drivers/usb/host/fsl-mph-dr-of.c
@@ -24,7 +24,7 @@ struct fsl_usb2_dev_data {
enum fsl_usb2_operating_modes op_mode; /* operating mode */
};
-struct fsl_usb2_dev_data dr_mode_data[] = {
+static struct fsl_usb2_dev_data dr_mode_data[] = {
{
.dr_mode = "host",
.drivers = { "fsl-ehci", NULL, NULL, },
@@ -42,7 +42,7 @@ struct fsl_usb2_dev_data dr_mode_data[] = {
},
};
-struct fsl_usb2_dev_data *get_dr_mode_data(struct device_node *np)
+static struct fsl_usb2_dev_data *get_dr_mode_data(struct device_node *np)
{
const unsigned char *prop;
int i;
@@ -75,7 +75,7 @@ static enum fsl_usb2_phy_modes determine_usb_phy(const char *phy_type)
return FSL_USB2_PHY_NONE;
}
-struct platform_device *fsl_usb2_device_register(
+static struct platform_device *fsl_usb2_device_register(
struct platform_device *ofdev,
struct fsl_usb2_platform_data *pdata,
const char *name, int id)
diff --git a/drivers/usb/phy/phy-omap-usb3.c b/drivers/usb/phy/phy-omap-usb3.c
index fc15694..4e8a040 100644
--- a/drivers/usb/phy/phy-omap-usb3.c
+++ b/drivers/usb/phy/phy-omap-usb3.c
@@ -79,7 +79,7 @@ static struct usb_dpll_params *omap_usb3_get_dpll_params(unsigned long rate)
return &dpll_map[i].params;
}
- return 0;
+ return NULL;
}
static int omap_usb3_suspend(struct usb_phy *x, int suspend)
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index c454bfa..ddb9c51 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -60,7 +60,7 @@ config USB_SERIAL_SIMPLE
- Suunto ANT+ USB device.
- Fundamental Software dongle.
- HP4x calculators
- - a number of Motoroloa phones
+ - a number of Motorola phones
- Siemens USB/MPI adapter.
- ViVOtech ViVOpay USB device.
- Infineon Modem Flashloader USB interface
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index e7a84f0..bedf8e4 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -139,6 +139,7 @@ enum pl2303_type {
HX_TA, /* HX(A) / X(A) / TA version */ /* TODO: improve */
HXD_EA_RA_SA, /* HXD / EA / RA / SA version */ /* TODO: improve */
TB, /* TB version */
+ HX_CLONE, /* Cheap and less functional clone of the HX chip */
};
/*
* NOTE: don't know the difference between type 0 and type 1,
@@ -206,8 +207,23 @@ static int pl2303_startup(struct usb_serial *serial)
* the device descriptors of the X/HX, HXD, EA, RA, SA, TA, TB
*/
if (le16_to_cpu(serial->dev->descriptor.bcdDevice) == 0x300) {
- type = HX_TA;
- type_str = "X/HX/TA";
+ /* Check if the device is a clone */
+ pl2303_vendor_read(0x9494, 0, serial, buf);
+ /*
+ * NOTE: Not sure if this read is really needed.
+ * The HX returns 0x00, the clone 0x02, but the Windows
+ * driver seems to ignore the value and continues.
+ */
+ pl2303_vendor_write(0x0606, 0xaa, serial);
+ pl2303_vendor_read(0x8686, 0, serial, buf);
+ if (buf[0] != 0xaa) {
+ type = HX_CLONE;
+ type_str = "X/HX clone (limited functionality)";
+ } else {
+ type = HX_TA;
+ type_str = "X/HX/TA";
+ }
+ pl2303_vendor_write(0x0606, 0x00, serial);
} else if (le16_to_cpu(serial->dev->descriptor.bcdDevice)
== 0x400) {
type = HXD_EA_RA_SA;
@@ -305,8 +321,9 @@ static int pl2303_baudrate_encode_direct(int baud, enum pl2303_type type,
{
/*
* NOTE: Only the values defined in baud_sup are supported !
- * => if unsupported values are set, the PL2303 seems to
- * use 9600 baud (at least my PL2303X always does)
+ * => if unsupported values are set, the PL2303 uses 9600 baud instead
+ * => HX clones just don't work at unsupported baud rates < 115200 baud,
+ * for baud rates > 115200 they run at 115200 baud
*/
const int baud_sup[] = { 75, 150, 300, 600, 1200, 1800, 2400, 3600,
4800, 7200, 9600, 14400, 19200, 28800, 38400,
@@ -316,14 +333,14 @@ static int pl2303_baudrate_encode_direct(int baud, enum pl2303_type type,
* NOTE: With the exception of type_0/1 devices, the following
* additional baud rates are supported (tested with HX rev. 3A only):
* 110*, 56000*, 128000, 134400, 161280, 201600, 256000*, 268800,
- * 403200, 806400. (*: not HX)
+ * 403200, 806400. (*: not HX and HX clones)
*
* Maximum values: HXD, TB: 12000000; HX, TA: 6000000;
- * type_0+1: 1228800; RA: 921600; SA: 115200
+ * type_0+1: 1228800; RA: 921600; HX clones, SA: 115200
*
* As long as we are not using this encoding method for anything else
- * than the type_0+1 and HX chips, there is no point in complicating
- * the code to support them.
+ * than the type_0+1, HX and HX clone chips, there is no point in
+ * complicating the code to support them.
*/
int i;
@@ -347,6 +364,8 @@ static int pl2303_baudrate_encode_direct(int baud, enum pl2303_type type,
baud = min_t(int, baud, 6000000);
else if (type == type_0 || type == type_1)
baud = min_t(int, baud, 1228800);
+ else if (type == HX_CLONE)
+ baud = min_t(int, baud, 115200);
/* Direct (standard) baud rate encoding method */
put_unaligned_le32(baud, buf);
@@ -359,7 +378,8 @@ static int pl2303_baudrate_encode_divisor(int baud, enum pl2303_type type,
/*
* Divisor based baud rate encoding method
*
- * NOTE: it's not clear if the type_0/1 chips support this method
+ * NOTE: HX clones do NOT support this method.
+ * It's not clear if the type_0/1 chips support it.
*
* divisor = 12MHz * 32 / baudrate = 2^A * B
*
@@ -452,7 +472,7 @@ static void pl2303_encode_baudrate(struct tty_struct *tty,
* 1) Direct method: encodes the baud rate value directly
* => supported by all chip types
* 2) Divisor based method: encodes a divisor to a base value (12MHz*32)
- * => supported by HX chips (and likely not by type_0/1 chips)
+ * => not supported by HX clones (and likely type_0/1 chips)
*
* NOTE: Although the divisor based baud rate encoding method is much
* more flexible, some of the standard baud rate values can not be
@@ -460,7 +480,7 @@ static void pl2303_encode_baudrate(struct tty_struct *tty,
* the device likely uses the same baud rate generator for both methods
* so that there is likley no difference.
*/
- if (type == type_0 || type == type_1)
+ if (type == type_0 || type == type_1 || type == HX_CLONE)
baud = pl2303_baudrate_encode_direct(baud, type, buf);
else
baud = pl2303_baudrate_encode_divisor(baud, type, buf);
@@ -813,6 +833,7 @@ static void pl2303_break_ctl(struct tty_struct *tty, int break_state)
result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
BREAK_REQUEST, BREAK_REQUEST_TYPE, state,
0, NULL, 0, 100);
+ /* NOTE: HX clones don't support sending breaks, -EPIPE is returned */
if (result)
dev_err(&port->dev, "error sending break = %d\n", result);
}
OpenPOWER on IntegriCloud