diff options
| -rw-r--r-- | arch/cris/arch-v10/drivers/ds1302.c | 515 | ||||
| -rw-r--r-- | arch/cris/arch-v10/drivers/pcf8563.c | 380 | ||||
| -rw-r--r-- | arch/cris/arch-v10/kernel/fasttimer.c | 2 | ||||
| -rw-r--r-- | arch/cris/arch-v10/kernel/time.c | 9 | ||||
| -rw-r--r-- | arch/cris/arch-v32/kernel/time.c | 7 | ||||
| -rw-r--r-- | arch/cris/include/asm/Kbuild | 1 | ||||
| -rw-r--r-- | arch/cris/include/asm/rtc.h | 107 | ||||
| -rw-r--r-- | arch/cris/kernel/time.c | 76 |
8 files changed, 7 insertions, 1090 deletions
diff --git a/arch/cris/arch-v10/drivers/ds1302.c b/arch/cris/arch-v10/drivers/ds1302.c deleted file mode 100644 index 74f99c6..0000000 --- a/arch/cris/arch-v10/drivers/ds1302.c +++ /dev/null @@ -1,515 +0,0 @@ -/*!*************************************************************************** -*! -*! FILE NAME : ds1302.c -*! -*! DESCRIPTION: Implements an interface for the DS1302 RTC through Etrax I/O -*! -*! Functions exported: ds1302_readreg, ds1302_writereg, ds1302_init -*! -*! --------------------------------------------------------------------------- -*! -*! (C) Copyright 1999-2007 Axis Communications AB, LUND, SWEDEN -*! -*!***************************************************************************/ - - -#include <linux/fs.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/miscdevice.h> -#include <linux/delay.h> -#include <linux/mutex.h> -#include <linux/bcd.h> -#include <linux/capability.h> - -#include <asm/uaccess.h> -#include <arch/svinto.h> -#include <asm/io.h> -#include <asm/rtc.h> -#include <arch/io_interface_mux.h> - -#include "i2c.h" - -#define RTC_MAJOR_NR 121 /* local major, change later */ - -static DEFINE_MUTEX(ds1302_mutex); -static const char ds1302_name[] = "ds1302"; - -/* The DS1302 might be connected to different bits on different products. - * It has three signals - SDA, SCL and RST. RST and SCL are always outputs, - * but SDA can have a selected direction. - * For now, only PORT_PB is hardcoded. - */ - -/* The RST bit may be on either the Generic Port or Port PB. */ -#ifdef CONFIG_ETRAX_DS1302_RST_ON_GENERIC_PORT -#define TK_RST_OUT(x) REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow, CONFIG_ETRAX_DS1302_RSTBIT, x) -#define TK_RST_DIR(x) -#else -#define TK_RST_OUT(x) REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, CONFIG_ETRAX_DS1302_RSTBIT, x) -#define TK_RST_DIR(x) REG_SHADOW_SET(R_PORT_PB_DIR, port_pb_dir_shadow, CONFIG_ETRAX_DS1302_RSTBIT, x) -#endif - - -#define TK_SDA_OUT(x) REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, CONFIG_ETRAX_DS1302_SDABIT, x) -#define TK_SCL_OUT(x) REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, CONFIG_ETRAX_DS1302_SCLBIT, x) - -#define TK_SDA_IN() ((*R_PORT_PB_READ >> CONFIG_ETRAX_DS1302_SDABIT) & 1) -/* 1 is out, 0 is in */ -#define TK_SDA_DIR(x) REG_SHADOW_SET(R_PORT_PB_DIR, port_pb_dir_shadow, CONFIG_ETRAX_DS1302_SDABIT, x) -#define TK_SCL_DIR(x) REG_SHADOW_SET(R_PORT_PB_DIR, port_pb_dir_shadow, CONFIG_ETRAX_DS1302_SCLBIT, x) - - -/* - * The reason for tempudelay and not udelay is that loops_per_usec - * (used in udelay) is not set when functions here are called from time.c - */ - -static void tempudelay(int usecs) -{ - volatile int loops; - - for(loops = usecs * 12; loops > 0; loops--) - /* nothing */; -} - - -/* Send 8 bits. */ -static void -out_byte(unsigned char x) -{ - int i; - TK_SDA_DIR(1); - for (i = 8; i--;) { - /* The chip latches incoming bits on the rising edge of SCL. */ - TK_SCL_OUT(0); - TK_SDA_OUT(x & 1); - tempudelay(1); - TK_SCL_OUT(1); - tempudelay(1); - x >>= 1; - } - TK_SDA_DIR(0); -} - -static unsigned char -in_byte(void) -{ - unsigned char x = 0; - int i; - - /* Read byte. Bits come LSB first, on the falling edge of SCL. - * Assume SDA is in input direction already. - */ - TK_SDA_DIR(0); - - for (i = 8; i--;) { - TK_SCL_OUT(0); - tempudelay(1); - x >>= 1; - x |= (TK_SDA_IN() << 7); - TK_SCL_OUT(1); - tempudelay(1); - } - - return x; -} - -/* Prepares for a transaction by de-activating RST (active-low). */ - -static void -start(void) -{ - TK_SCL_OUT(0); - tempudelay(1); - TK_RST_OUT(0); - tempudelay(5); - TK_RST_OUT(1); -} - -/* Ends a transaction by taking RST active again. */ - -static void -stop(void) -{ - tempudelay(2); - TK_RST_OUT(0); -} - -/* Enable writing. */ - -static void -ds1302_wenable(void) -{ - start(); - out_byte(0x8e); /* Write control register */ - out_byte(0x00); /* Disable write protect bit 7 = 0 */ - stop(); -} - -/* Disable writing. */ - -static void -ds1302_wdisable(void) -{ - start(); - out_byte(0x8e); /* Write control register */ - out_byte(0x80); /* Disable write protect bit 7 = 0 */ - stop(); -} - - - -/* Read a byte from the selected register in the DS1302. */ - -unsigned char -ds1302_readreg(int reg) -{ - unsigned char x; - - start(); - out_byte(0x81 | (reg << 1)); /* read register */ - x = in_byte(); - stop(); - - return x; -} - -/* Write a byte to the selected register. */ - -void -ds1302_writereg(int reg, unsigned char val) -{ -#ifndef CONFIG_ETRAX_RTC_READONLY - int do_writereg = 1; -#else - int do_writereg = 0; - - if (reg == RTC_TRICKLECHARGER) - do_writereg = 1; -#endif - - if (do_writereg) { - ds1302_wenable(); - start(); - out_byte(0x80 | (reg << 1)); /* write register */ - out_byte(val); - stop(); - ds1302_wdisable(); - } -} - -void -get_rtc_time(struct rtc_time *rtc_tm) -{ - unsigned long flags; - - local_irq_save(flags); - - rtc_tm->tm_sec = CMOS_READ(RTC_SECONDS); - rtc_tm->tm_min = CMOS_READ(RTC_MINUTES); - rtc_tm->tm_hour = CMOS_READ(RTC_HOURS); - rtc_tm->tm_mday = CMOS_READ(RTC_DAY_OF_MONTH); - rtc_tm->tm_mon = CMOS_READ(RTC_MONTH); - rtc_tm->tm_year = CMOS_READ(RTC_YEAR); - - local_irq_restore(flags); - - rtc_tm->tm_sec = bcd2bin(rtc_tm->tm_sec); - rtc_tm->tm_min = bcd2bin(rtc_tm->tm_min); - rtc_tm->tm_hour = bcd2bin(rtc_tm->tm_hour); - rtc_tm->tm_mday = bcd2bin(rtc_tm->tm_mday); - rtc_tm->tm_mon = bcd2bin(rtc_tm->tm_mon); - rtc_tm->tm_year = bcd2bin(rtc_tm->tm_year); - - /* - * Account for differences between how the RTC uses the values - * and how they are defined in a struct rtc_time; - */ - - if (rtc_tm->tm_year <= 69) - rtc_tm->tm_year += 100; - - rtc_tm->tm_mon--; -} - -static unsigned char days_in_mo[] = - {0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31}; - -/* ioctl that supports RTC_RD_TIME and RTC_SET_TIME (read and set time/date). */ - -static int rtc_ioctl(struct file *file, unsigned int cmd, unsigned long arg) -{ - unsigned long flags; - - switch(cmd) { - case RTC_RD_TIME: /* read the time/date from RTC */ - { - struct rtc_time rtc_tm; - - memset(&rtc_tm, 0, sizeof (struct rtc_time)); - get_rtc_time(&rtc_tm); - if (copy_to_user((struct rtc_time*)arg, &rtc_tm, sizeof(struct rtc_time))) - return -EFAULT; - return 0; - } - - case RTC_SET_TIME: /* set the RTC */ - { - struct rtc_time rtc_tm; - unsigned char mon, day, hrs, min, sec, leap_yr; - unsigned int yrs; - - if (!capable(CAP_SYS_TIME)) - return -EPERM; - - if (copy_from_user(&rtc_tm, (struct rtc_time*)arg, sizeof(struct rtc_time))) - return -EFAULT; - - yrs = rtc_tm.tm_year + 1900; - mon = rtc_tm.tm_mon + 1; /* tm_mon starts at zero */ - day = rtc_tm.tm_mday; - hrs = rtc_tm.tm_hour; - min = rtc_tm.tm_min; - sec = rtc_tm.tm_sec; - - - if ((yrs < 1970) || (yrs > 2069)) - return -EINVAL; - - leap_yr = ((!(yrs % 4) && (yrs % 100)) || !(yrs % 400)); - - if ((mon > 12) || (day == 0)) - return -EINVAL; - - if (day > (days_in_mo[mon] + ((mon == 2) && leap_yr))) - return -EINVAL; - - if ((hrs >= 24) || (min >= 60) || (sec >= 60)) - return -EINVAL; - - if (yrs >= 2000) - yrs -= 2000; /* RTC (0, 1, ... 69) */ - else - yrs -= 1900; /* RTC (70, 71, ... 99) */ - - sec = bin2bcd(sec); - min = bin2bcd(min); - hrs = bin2bcd(hrs); - day = bin2bcd(day); - mon = bin2bcd(mon); - yrs = bin2bcd(yrs); - - local_irq_save(flags); - CMOS_WRITE(yrs, RTC_YEAR); - CMOS_WRITE(mon, RTC_MONTH); - CMOS_WRITE(day, RTC_DAY_OF_MONTH); - CMOS_WRITE(hrs, RTC_HOURS); - CMOS_WRITE(min, RTC_MINUTES); - CMOS_WRITE(sec, RTC_SECONDS); - local_irq_restore(flags); - - /* Notice that at this point, the RTC is updated but - * the kernel is still running with the old time. - * You need to set that separately with settimeofday - * or adjtimex. - */ - return 0; - } - - case RTC_SET_CHARGE: /* set the RTC TRICKLE CHARGE register */ - { - int tcs_val; - - if (!capable(CAP_SYS_TIME)) - return -EPERM; - - if(copy_from_user(&tcs_val, (int*)arg, sizeof(int))) - return -EFAULT; - - tcs_val = RTC_TCR_PATTERN | (tcs_val & 0x0F); - ds1302_writereg(RTC_TRICKLECHARGER, tcs_val); - return 0; - } - case RTC_VL_READ: - { - /* TODO: - * Implement voltage low detection support - */ - printk(KERN_WARNING "DS1302: RTC Voltage Low detection" - " is not supported\n"); - return 0; - } - case RTC_VL_CLR: - { - /* TODO: - * Nothing to do since Voltage Low detection is not supported - */ - return 0; - } - default: - return -ENOIOCTLCMD; - } -} - -static long rtc_unlocked_ioctl(struct file *file, unsigned int cmd, unsigned long arg) -{ - int ret; - - mutex_lock(&ds1302_mutex); - ret = rtc_ioctl(file, cmd, arg); - mutex_unlock(&ds1302_mutex); - - return ret; -} - -static void -print_rtc_status(void) -{ - struct rtc_time tm; - - get_rtc_time(&tm); - - /* - * There is no way to tell if the luser has the RTC set for local - * time or for Universal Standard Time (GMT). Probably local though. - */ - - printk(KERN_INFO "rtc_time\t: %02d:%02d:%02d\n", - tm.tm_hour, tm.tm_min, tm.tm_sec); - printk(KERN_INFO "rtc_date\t: %04d-%02d-%02d\n", - tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday); -} - -/* The various file operations we support. */ - -static const struct file_operations rtc_fops = { - .owner = THIS_MODULE, - .unlocked_ioctl = rtc_unlocked_ioctl, - .llseek = noop_llseek, -}; - -/* Probe for the chip by writing something to its RAM and try reading it back. */ - -#define MAGIC_PATTERN 0x42 - -static int __init -ds1302_probe(void) -{ - int retval, res; - - TK_RST_DIR(1); - TK_SCL_DIR(1); - TK_SDA_DIR(0); - - /* Try to talk to timekeeper. */ - - ds1302_wenable(); - start(); - out_byte(0xc0); /* write RAM byte 0 */ - out_byte(MAGIC_PATTERN); /* write something magic */ - start(); - out_byte(0xc1); /* read RAM byte 0 */ - - if((res = in_byte()) == MAGIC_PATTERN) { - stop(); - ds1302_wdisable(); - printk(KERN_INFO "%s: RTC found.\n", ds1302_name); - printk(KERN_INFO "%s: SDA, SCL, RST on PB%i, PB%i, %s%i\n", - ds1302_name, - CONFIG_ETRAX_DS1302_SDABIT, - CONFIG_ETRAX_DS1302_SCLBIT, -#ifdef CONFIG_ETRAX_DS1302_RST_ON_GENERIC_PORT - "GENIO", -#else - "PB", -#endif - CONFIG_ETRAX_DS1302_RSTBIT); - print_rtc_status(); - retval = 1; - } else { - stop(); - retval = 0; - } - - return retval; -} - - -/* Just probe for the RTC and register the device to handle the ioctl needed. */ - -int __init -ds1302_init(void) -{ -#ifdef CONFIG_ETRAX_I2C - i2c_init(); -#endif - - if (!ds1302_probe()) { -#ifdef CONFIG_ETRAX_DS1302_RST_ON_GENERIC_PORT -#if CONFIG_ETRAX_DS1302_RSTBIT == 27 - /* - * The only way to set g27 to output is to enable ATA. - * - * Make sure that R_GEN_CONFIG is setup correct. - */ - /* Allocating the ATA interface will grab almost all - * pins in I/O groups a, b, c and d. A consequence of - * allocating the ATA interface is that the fixed - * interfaces shared RAM, parallel port 0, parallel - * port 1, parallel port W, SCSI-8 port 0, SCSI-8 port - * 1, SCSI-W, serial port 2, serial port 3, - * synchronous serial port 3 and USB port 2 and almost - * all GPIO pins on port g cannot be used. - */ - if (cris_request_io_interface(if_ata, "ds1302/ATA")) { - printk(KERN_WARNING "ds1302: Failed to get IO interface\n"); - return -1; - } - -#elif CONFIG_ETRAX_DS1302_RSTBIT == 0 - if (cris_io_interface_allocate_pins(if_gpio_grp_a, - 'g', - CONFIG_ETRAX_DS1302_RSTBIT, - CONFIG_ETRAX_DS1302_RSTBIT)) { - printk(KERN_WARNING "ds1302: Failed to get IO interface\n"); - return -1; - } - - /* Set the direction of this bit to out. */ - genconfig_shadow = ((genconfig_shadow & - ~IO_MASK(R_GEN_CONFIG, g0dir)) | - (IO_STATE(R_GEN_CONFIG, g0dir, out))); - *R_GEN_CONFIG = genconfig_shadow; -#endif - if (!ds1302_probe()) { - printk(KERN_WARNING "%s: RTC not found.\n", ds1302_name); - return -1; - } -#else - printk(KERN_WARNING "%s: RTC not found.\n", ds1302_name); - return -1; -#endif - } - /* Initialise trickle charger */ - ds1302_writereg(RTC_TRICKLECHARGER, - RTC_TCR_PATTERN |(CONFIG_ETRAX_DS1302_TRICKLE_CHARGE & 0x0F)); - /* Start clock by resetting CLOCK_HALT */ - ds1302_writereg(RTC_SECONDS, (ds1302_readreg(RTC_SECONDS) & 0x7F)); - return 0; -} - -static int __init ds1302_register(void) -{ - ds1302_init(); - if (register_chrdev(RTC_MAJOR_NR, ds1302_name, &rtc_fops)) { - printk(KERN_INFO "%s: unable to get major %d for rtc\n", - ds1302_name, RTC_MAJOR_NR); - return -1; - } - return 0; - -} - -module_init(ds1302_register); diff --git a/arch/cris/arch-v10/drivers/pcf8563.c b/arch/cris/arch-v10/drivers/pcf8563.c deleted file mode 100644 index 9da0568..0000000 --- a/arch/cris/arch-v10/drivers/pcf8563.c +++ /dev/null @@ -1,380 +0,0 @@ -/* - * PCF8563 RTC - * - * From Phillips' datasheet: - * - * The PCF8563 is a CMOS real-time clock/calendar optimized for low power - * consumption. A programmable clock output, interrupt output and voltage - * low detector are also provided. All address and data are transferred - * serially via two-line bidirectional I2C-bus. Maximum bus speed is - * 400 kbits/s. The built-in word address register is incremented - * automatically after each written or read byte. - * - * Copyright (c) 2002-2007, Axis Communications AB - * All rights reserved. - * - * Author: Tobias Anderberg <tobiasa@axis.com>. - * - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/sched.h> -#include <linux/init.h> -#include <linux/fs.h> -#include <linux/ioctl.h> -#include <linux/delay.h> -#include <linux/bcd.h> -#include <linux/mutex.h> - -#include <asm/uaccess.h> -#include <asm/io.h> -#include <asm/rtc.h> - -#include "i2c.h" - -#define PCF8563_MAJOR 121 /* Local major number. */ -#define DEVICE_NAME "rtc" /* Name which is registered in /proc/devices. */ -#define PCF8563_NAME "PCF8563" -#define DRIVER_VERSION "$Revision: 1.24 $" - -/* I2C bus slave registers. */ -#define RTC_I2C_READ 0xa3 -#define RTC_I2C_WRITE 0xa2 - -/* Two simple wrapper macros, saves a few keystrokes. */ -#define rtc_read(x) i2c_readreg(RTC_I2C_READ, x) -#define rtc_write(x,y) i2c_writereg(RTC_I2C_WRITE, x, y) - -static DEFINE_MUTEX(pcf8563_mutex); -static DEFINE_MUTEX(rtc_lock); /* Protect state etc */ - -static const unsigned char days_in_month[] = - { 0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 }; - -static long pcf8563_unlocked_ioctl(struct file *, unsigned int, unsigned long); - -/* Cache VL bit value read at driver init since writing the RTC_SECOND - * register clears the VL status. - */ -static int voltage_low; - -static const struct file_operations pcf8563_fops = { - .owner = THIS_MODULE, - .unlocked_ioctl = pcf8563_unlocked_ioctl, - .llseek = noop_llseek, -}; - -unsigned char -pcf8563_readreg(int reg) -{ - unsigned char res = rtc_read(reg); - - /* The PCF8563 does not return 0 for unimplemented bits. */ - switch (reg) { - case RTC_SECONDS: - case RTC_MINUTES: - res &= 0x7F; - break; - case RTC_HOURS: - case RTC_DAY_OF_MONTH: - res &= 0x3F; - break; - case RTC_WEEKDAY: - res &= 0x07; - break; - case RTC_MONTH: - res &= 0x1F; - break; - case RTC_CONTROL1: - res &= 0xA8; - break; - case RTC_CONTROL2: - res &= 0x1F; - break; - case RTC_CLOCKOUT_FREQ: - case RTC_TIMER_CONTROL: - res &= 0x83; - break; - } - return res; -} - -void -pcf8563_writereg(int reg, unsigned char val) -{ - rtc_write(reg, val); -} - -void -get_rtc_time(struct rtc_time *tm) -{ - tm->tm_sec = rtc_read(RTC_SECONDS); - tm->tm_min = rtc_read(RTC_MINUTES); - tm->tm_hour = rtc_read(RTC_HOURS); - tm->tm_mday = rtc_read(RTC_DAY_OF_MONTH); - tm->tm_wday = rtc_read(RTC_WEEKDAY); - tm->tm_mon = rtc_read(RTC_MONTH); - tm->tm_year = rtc_read(RTC_YEAR); - - if (tm->tm_sec & 0x80) { - printk(KERN_ERR "%s: RTC Voltage Low - reliable date/time " - "information is no longer guaranteed!\n", PCF8563_NAME); - } - - tm->tm_year = bcd2bin(tm->tm_year) + - ((tm->tm_mon & 0x80) ? 100 : 0); - tm->tm_sec &= 0x7F; - tm->tm_min &= 0x7F; - tm->tm_hour &= 0x3F; - tm->tm_mday &= 0x3F; - tm->tm_wday &= 0x07; /* Not coded in BCD. */ - tm->tm_mon &= 0x1F; - - tm->tm_sec = bcd2bin(tm->tm_sec); - tm->tm_min = bcd2bin(tm->tm_min); - tm->tm_hour = bcd2bin(tm->tm_hour); - tm->tm_mday = bcd2bin(tm->tm_mday); - tm->tm_mon = bcd2bin(tm->tm_mon); - tm->tm_mon--; /* Month is 1..12 in RTC but 0..11 in linux */ -} - -int __init -pcf8563_init(void) -{ - static int res; - static int first = 1; - - if (!first) - return res; - first = 0; - - /* Initiate the i2c protocol. */ - res = i2c_init(); - if (res < 0) { - printk(KERN_CRIT "pcf8563_init: Failed to init i2c.\n"); - return res; - } - - /* - * First of all we need to reset the chip. This is done by - * clearing control1, control2 and clk freq and resetting - * all alarms. - */ - if (rtc_write(RTC_CONTROL1, 0x00) < 0) - goto err; - - if (rtc_write(RTC_CONTROL2, 0x00) < 0) - goto err; - - if (rtc_write(RTC_CLOCKOUT_FREQ, 0x00) < 0) - goto err; - - if (rtc_write(RTC_TIMER_CONTROL, 0x03) < 0) - goto err; - - /* Reset the alarms. */ - if (rtc_write(RTC_MINUTE_ALARM, 0x80) < 0) - goto err; - - if (rtc_write(RTC_HOUR_ALARM, 0x80) < 0) - goto err; - - if (rtc_write(RTC_DAY_ALARM, 0x80) < 0) - goto err; - - if (rtc_write(RTC_WEEKDAY_ALARM, 0x80) < 0) - goto err; - - /* Check for low voltage, and warn about it. */ - if (rtc_read(RTC_SECONDS) & 0x80) { - voltage_low = 1; - printk(KERN_WARNING "%s: RTC Voltage Low - reliable " - "date/time information is no longer guaranteed!\n", - PCF8563_NAME); - } - - return res; - -err: - printk(KERN_INFO "%s: Error initializing chip.\n", PCF8563_NAME); - res = -1; - return res; -} - -void __exit -pcf8563_exit(void) -{ - unregister_chrdev(PCF8563_MAJOR, DEVICE_NAME); -} - -/* - * ioctl calls for this driver. Why return -ENOTTY upon error? Because - * POSIX says so! - */ -static int pcf8563_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) -{ - /* Some sanity checks. */ - if (_IOC_TYPE(cmd) != RTC_MAGIC) - return -ENOTTY; - - if (_IOC_NR(cmd) > RTC_MAX_IOCTL) - return -ENOTTY; - - switch (cmd) { - case RTC_RD_TIME: - { - struct rtc_time tm; - - mutex_lock(&rtc_lock); - memset(&tm, 0, sizeof tm); - get_rtc_time(&tm); - - if (copy_to_user((struct rtc_time *) arg, &tm, - sizeof tm)) { - mutex_unlock(&rtc_lock); - return -EFAULT; - } - - mutex_unlock(&rtc_lock); - - return 0; - } - case RTC_SET_TIME: - { - int leap; - int year; - int century; - struct rtc_time tm; - - memset(&tm, 0, sizeof tm); - if (!capable(CAP_SYS_TIME)) - return -EPERM; - - if (copy_from_user(&tm, (struct rtc_time *) arg, sizeof tm)) - return -EFAULT; - - /* Convert from struct tm to struct rtc_time. */ - tm.tm_year += 1900; - tm.tm_mon += 1; - - /* - * Check if tm.tm_year is a leap year. A year is a leap - * year if it is divisible by 4 but not 100, except - * that years divisible by 400 _are_ leap years. - */ - year = tm.tm_year; - leap = (tm.tm_mon == 2) && - ((year % 4 == 0 && year % 100 != 0) || year % 400 == 0); - - /* Perform some sanity checks. */ - if ((tm.tm_year < 1970) || - (tm.tm_mon > 12) || - (tm.tm_mday == 0) || - (tm.tm_mday > days_in_month[tm.tm_mon] + leap) || - (tm.tm_wday >= 7) || - (tm.tm_hour >= 24) || - (tm.tm_min >= 60) || - (tm.tm_sec >= 60)) - return -EINVAL; - - century = (tm.tm_year >= 2000) ? 0x80 : 0; - tm.tm_year = tm.tm_year % 100; - - tm.tm_year = bin2bcd(tm.tm_year); - tm.tm_mon = bin2bcd(tm.tm_mon); - tm.tm_mday = bin2bcd(tm.tm_mday); - tm.tm_hour = bin2bcd(tm.tm_hour); - tm.tm_min = bin2bcd(tm.tm_min); - tm.tm_sec = bin2bcd(tm.tm_sec); - tm.tm_mon |= century; - - mutex_lock(&rtc_lock); - - rtc_write(RTC_YEAR, tm.tm_year); - rtc_write(RTC_MONTH, tm.tm_mon); - rtc_write(RTC_WEEKDAY, tm.tm_wday); /* Not coded in BCD. */ - rtc_write(RTC_DAY_OF_MONTH, tm.tm_mday); - rtc_write(RTC_HOURS, tm.tm_hour); - rtc_write(RTC_MINUTES, tm.tm_min); - rtc_write(RTC_SECONDS, tm.tm_sec); - - mutex_unlock(&rtc_lock); - - return 0; - } - case RTC_VL_READ: - if (voltage_low) { - printk(KERN_ERR "%s: RTC Voltage Low - " - "reliable date/time information is no " - "longer guaranteed!\n", PCF8563_NAME); - } - - if (copy_to_user((int *) arg, &voltage_low, sizeof(int))) - return -EFAULT; - return 0; - - case RTC_VL_CLR: - { - /* Clear the VL bit in the seconds register in case - * the time has not been set already (which would - * have cleared it). This does not really matter - * because of the cached voltage_low value but do it - * anyway for consistency. */ - - int ret = rtc_read(RTC_SECONDS); - - rtc_write(RTC_SECONDS, (ret & 0x7F)); - - /* Clear the cached value. */ - voltage_low = 0; - - return 0; - } - default: - return -ENOTTY; - } - - return 0; -} - -static long pcf8563_unlocked_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) -{ - int ret; - - mutex_lock(&pcf8563_mutex); - ret = pcf8563_ioctl(filp, cmd, arg); - mutex_unlock(&pcf8563_mutex); - - return ret; -} - -static int __init pcf8563_register(void) -{ - if (pcf8563_init() < 0) { - printk(KERN_INFO "%s: Unable to initialize Real-Time Clock " - "Driver, %s\n", PCF8563_NAME, DRIVER_VERSION); - return -1; - } - - if (register_chrdev(PCF8563_MAJOR, DEVICE_NAME, &pcf8563_fops) < 0) { - printk(KERN_INFO "%s: Unable to get major number %d for RTC device.\n", - PCF8563_NAME, PCF8563_MAJOR); - return -1; - } - - printk(KERN_INFO "%s Real-Time Clock Driver, %s\n", PCF8563_NAME, - DRIVER_VERSION); - - /* Check for low voltage, and warn about it. */ - if (voltage_low) { - printk(KERN_WARNING "%s: RTC Voltage Low - reliable date/time " - "information is no longer guaranteed!\n", PCF8563_NAME); - } - - return 0; -} - -module_init(pcf8563_register); -module_exit(pcf8563_exit); diff --git a/arch/cris/arch-v10/kernel/fasttimer.c b/arch/cris/arch-v10/kernel/fasttimer.c index 8a8196e..082f189 100644 --- a/arch/cris/arch-v10/kernel/fasttimer.c +++ b/arch/cris/arch-v10/kernel/fasttimer.c @@ -21,8 +21,6 @@ #include <asm/io.h> #include <asm/irq.h> #include <asm/delay.h> -#include <asm/rtc.h> - #include <arch/svinto.h> #include <asm/fasttimer.h> diff --git a/arch/cris/arch-v10/kernel/time.c b/arch/cris/arch-v10/kernel/time.c index 20c85b5..bcffcb6 100644 --- a/arch/cris/arch-v10/kernel/time.c +++ b/arch/cris/arch-v10/kernel/time.c @@ -19,16 +19,12 @@ #include <asm/signal.h> #include <asm/io.h> #include <asm/delay.h> -#include <asm/rtc.h> #include <asm/irq_regs.h> /* define this if you need to use print_timestamp */ /* it will make jiffies at 96 hz instead of 100 hz though */ #undef USE_CASCADE_TIMERS -extern int set_rtc_mmss(unsigned long nowtime); -extern int have_rtc; - unsigned long get_ns_in_jiffie(void) { unsigned char timer_count, t1; @@ -203,11 +199,6 @@ time_init(void) */ loops_per_usec = 50; - if(RTC_INIT() < 0) - have_rtc = 0; - else - have_rtc = 1; - /* Setup the etrax timers * Base frequency is 25000 hz, divider 250 -> 100 HZ * In normal mode, we use timer0, so timer1 is free. In cascade diff --git a/arch/cris/arch-v32/kernel/time.c b/arch/cris/arch-v32/kernel/time.c index 6773fc8..8c4b45efd 100644 --- a/arch/cris/arch-v32/kernel/time.c +++ b/arch/cris/arch-v32/kernel/time.c @@ -18,7 +18,6 @@ #include <asm/signal.h> #include <asm/io.h> #include <asm/delay.h> -#include <asm/rtc.h> #include <asm/irq.h> #include <asm/irq_regs.h> @@ -67,7 +66,6 @@ unsigned long timer_regs[NR_CPUS] = }; extern int set_rtc_mmss(unsigned long nowtime); -extern int have_rtc; #ifdef CONFIG_CPU_FREQ static int @@ -265,11 +263,6 @@ void __init time_init(void) */ loops_per_usec = 50; - if(RTC_INIT() < 0) - have_rtc = 0; - else - have_rtc = 1; - /* Start CPU local timer. */ cris_timer_init(); diff --git a/arch/cris/include/asm/Kbuild b/arch/cris/include/asm/Kbuild index 956eea2..04d02a5 100644 --- a/arch/cris/include/asm/Kbuild +++ b/arch/cris/include/asm/Kbuild @@ -6,5 +6,4 @@ header-y += arch-v32/ header-y += ethernet.h header-y += etraxgpio.h header-y += rs485.h -header-y += rtc.h header-y += sync_serial.h diff --git a/arch/cris/include/asm/rtc.h b/arch/cris/include/asm/rtc.h deleted file mode 100644 index 17d3019..0000000 --- a/arch/cris/include/asm/rtc.h +++ /dev/null @@ -1,107 +0,0 @@ - -#ifndef __RTC_H__ -#define __RTC_H__ - -#ifdef CONFIG_ETRAX_DS1302 - /* Dallas DS1302 clock/calendar register numbers. */ -# define RTC_SECONDS 0 -# define RTC_MINUTES 1 -# define RTC_HOURS 2 -# define RTC_DAY_OF_MONTH 3 -# define RTC_MONTH 4 -# define RTC_WEEKDAY 5 -# define RTC_YEAR 6 -# define RTC_CONTROL 7 - - /* Bits in CONTROL register. */ -# define RTC_CONTROL_WRITEPROTECT 0x80 -# define RTC_TRICKLECHARGER 8 - - /* Bits in TRICKLECHARGER register TCS TCS TCS TCS DS DS RS RS. */ -# define RTC_TCR_PATTERN 0xA0 /* 1010xxxx */ -# define RTC_TCR_1DIOD 0x04 /* xxxx01xx */ -# define RTC_TCR_2DIOD 0x08 /* xxxx10xx */ -# define RTC_TCR_DISABLED 0x00 /* xxxxxx00 Disabled */ -# define RTC_TCR_2KOHM 0x01 /* xxxxxx01 2KOhm */ -# define RTC_TCR_4KOHM 0x02 /* xxxxxx10 4kOhm */ -# define RTC_TCR_8KOHM 0x03 /* xxxxxx11 8kOhm */ - -#elif defined(CONFIG_ETRAX_PCF8563) - /* I2C bus slave registers. */ -# define RTC_I2C_READ 0xa3 -# define RTC_I2C_WRITE 0xa2 - - /* Phillips PCF8563 registers. */ -# define RTC_CONTROL1 0x00 /* Control/Status register 1. */ -# define RTC_CONTROL2 0x01 /* Control/Status register 2. */ -# define RTC_CLOCKOUT_FREQ 0x0d /* CLKOUT frequency. */ -# define RTC_TIMER_CONTROL 0x0e /* Timer control. */ -# define RTC_TIMER_CNTDOWN 0x0f /* Timer countdown. */ - - /* BCD encoded clock registers. */ -# define RTC_SECONDS 0x02 -# define RTC_MINUTES 0x03 -# define RTC_HOURS 0x04 -# define RTC_DAY_OF_MONTH 0x05 -# define RTC_WEEKDAY 0x06 /* Not coded in BCD! */ -# define RTC_MONTH 0x07 -# define RTC_YEAR 0x08 -# define RTC_MINUTE_ALARM 0x09 -# define RTC_HOUR_ALARM 0x0a -# define RTC_DAY_ALARM 0x0b -# define RTC_WEEKDAY_ALARM 0x0c - -#endif - -#ifdef CONFIG_ETRAX_DS1302 -extern unsigned char ds1302_readreg(int reg); -extern void ds1302_writereg(int reg, unsigned char val); -extern int ds1302_init(void); -# define CMOS_READ(x) ds1302_readreg(x) -# define CMOS_WRITE(val,reg) ds1302_writereg(reg,val) -# define RTC_INIT() ds1302_init() -#elif defined(CONFIG_ETRAX_PCF8563) -extern unsigned char pcf8563_readreg(int reg); -extern void pcf8563_writereg(int reg, unsigned char val); -extern int pcf8563_init(void); -# define CMOS_READ(x) pcf8563_readreg(x) -# define CMOS_WRITE(val,reg) pcf8563_writereg(reg,val) -# define RTC_INIT() pcf8563_init() -#else - /* No RTC configured so we shouldn't try to access any. */ -# define CMOS_READ(x) 42 -# define CMOS_WRITE(x,y) -# define RTC_INIT() (-1) -#endif - -/* - * The struct used to pass data via the following ioctl. Similar to the - * struct tm in <time.h>, but it needs to be here so that the kernel - * source is self contained, allowing cross-compiles, etc. etc. - */ -struct rtc_time { - int tm_sec; - int tm_min; - int tm_hour; - int tm_mday; - int tm_mon; - int tm_year; - int tm_wday; - int tm_yday; - int tm_isdst; -}; - -/* ioctl() calls that are permitted to the /dev/rtc interface. */ -#define RTC_MAGIC 'p' -/* Read RTC time. */ -#define RTC_RD_TIME _IOR(RTC_MAGIC, 0x09, struct rtc_time) -/* Set RTC time. */ -#define RTC_SET_TIME _IOW(RTC_MAGIC, 0x0a, struct rtc_time) -#define RTC_SET_CHARGE _IOW(RTC_MAGIC, 0x0b, int) -/* Voltage low detector */ -#define RTC_VL_READ _IOR(RTC_MAGIC, 0x13, int) -/* Clear voltage low information */ -#define RTC_VL_CLR _IO(RTC_MAGIC, 0x14) -#define RTC_MAX_IOCTL 0x14 - -#endif /* __RTC_H__ */ diff --git a/arch/cris/kernel/time.c b/arch/cris/kernel/time.c index 4e73092..277ffc4 100644 --- a/arch/cris/kernel/time.c +++ b/arch/cris/kernel/time.c @@ -21,7 +21,6 @@ * */ -#include <asm/rtc.h> #include <linux/errno.h> #include <linux/module.h> #include <linux/param.h> @@ -32,7 +31,8 @@ #include <linux/profile.h> #include <linux/sched.h> /* just for sched_clock() - funny that */ -int have_rtc; /* used to remember if we have an RTC or not */; + +#define D(x) #define TICK_SIZE tick @@ -50,78 +50,16 @@ u32 arch_gettimeoffset(void) } #endif -/* - * BUG: This routine does not handle hour overflow properly; it just - * sets the minutes. Usually you'll only notice that after reboot! - */ - int set_rtc_mmss(unsigned long nowtime) { - int retval = 0; - int real_seconds, real_minutes, cmos_minutes; - - printk(KERN_DEBUG "set_rtc_mmss(%lu)\n", nowtime); - - if(!have_rtc) - return 0; - - cmos_minutes = CMOS_READ(RTC_MINUTES); - cmos_minutes = bcd2bin(cmos_minutes); - - /* - * since we're only adjusting minutes and seconds, - * don't interfere with hour overflow. This avoids - * messing with unknown time zones but requires your - * RTC not to be off by more than 15 minutes - */ - real_seconds = nowtime % 60; - real_minutes = nowtime / 60; - if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1) - real_minutes += 30; /* correct for half hour time zone */ - real_minutes %= 60; - - if (abs(real_minutes - cmos_minutes) < 30) { - real_seconds = bin2bcd(real_seconds); - real_minutes = bin2bcd(real_minutes); - CMOS_WRITE(real_seconds,RTC_SECONDS); - CMOS_WRITE(real_minutes,RTC_MINUTES); - } else { - printk_once(KERN_NOTICE - "set_rtc_mmss: can't update from %d to %d\n", - cmos_minutes, real_minutes); - retval = -1; - } - - return retval; + D(printk(KERN_DEBUG "set_rtc_mmss(%lu)\n", nowtime)); + return 0; } /* grab the time from the RTC chip */ - -unsigned long -get_cmos_time(void) +unsigned long get_cmos_time(void) { - unsigned int year, mon, day, hour, min, sec; - if(!have_rtc) - return 0; - - sec = CMOS_READ(RTC_SECONDS); - min = CMOS_READ(RTC_MINUTES); - hour = CMOS_READ(RTC_HOURS); - day = CMOS_READ(RTC_DAY_OF_MONTH); - mon = CMOS_READ(RTC_MONTH); - year = CMOS_READ(RTC_YEAR); - - sec = bcd2bin(sec); - min = bcd2bin(min); - hour = bcd2bin(hour); - day = bcd2bin(day); - mon = bcd2bin(mon); - year = bcd2bin(year); - - if ((year += 1900) < 1970) - year += 100; - - return mktime(year, mon, day, hour, min, sec); + return 0; } @@ -132,7 +70,7 @@ int update_persistent_clock(struct timespec now) void read_persistent_clock(struct timespec *ts) { - ts->tv_sec = get_cmos_time(); + ts->tv_sec = 0; ts->tv_nsec = 0; } |
