diff options
-rw-r--r-- | arch/arm/mach-pxa/spitz.c | 282 |
1 files changed, 138 insertions, 144 deletions
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 24c4d27..a8d4e3a 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -133,10 +133,8 @@ static unsigned long spitz_pin_config[] __initdata = { * Scoop GPIO expander ******************************************************************************/ #if defined(CONFIG_SHARP_SCOOP) || defined(CONFIG_SHARP_SCOOP_MODULE) -/* - * Spitz SCOOP Device #1 - */ -static struct resource spitz_scoop_resources[] = { +/* SCOOP Device #1 */ +static struct resource spitz_scoop_1_resources[] = { [0] = { .start = 0x10800000, .end = 0x10800fff, @@ -144,7 +142,7 @@ static struct resource spitz_scoop_resources[] = { }, }; -static struct scoop_config spitz_scoop_setup = { +static struct scoop_config spitz_scoop_1_setup = { .io_dir = SPITZ_SCP_IO_DIR, .io_out = SPITZ_SCP_IO_OUT, .suspend_clr = SPITZ_SCP_SUS_CLR, @@ -152,20 +150,18 @@ static struct scoop_config spitz_scoop_setup = { .gpio_base = SPITZ_SCP_GPIO_BASE, }; -struct platform_device spitzscoop_device = { +struct platform_device spitz_scoop_1_device = { .name = "sharp-scoop", .id = 0, .dev = { - .platform_data = &spitz_scoop_setup, + .platform_data = &spitz_scoop_1_setup, }, - .num_resources = ARRAY_SIZE(spitz_scoop_resources), - .resource = spitz_scoop_resources, + .num_resources = ARRAY_SIZE(spitz_scoop_1_resources), + .resource = spitz_scoop_1_resources, }; -/* - * Spitz SCOOP Device #2 - */ -static struct resource spitz_scoop2_resources[] = { +/* SCOOP Device #2 */ +static struct resource spitz_scoop_2_resources[] = { [0] = { .start = 0x08800040, .end = 0x08800fff, @@ -173,7 +169,7 @@ static struct resource spitz_scoop2_resources[] = { }, }; -static struct scoop_config spitz_scoop2_setup = { +static struct scoop_config spitz_scoop_2_setup = { .io_dir = SPITZ_SCP2_IO_DIR, .io_out = SPITZ_SCP2_IO_OUT, .suspend_clr = SPITZ_SCP2_SUS_CLR, @@ -181,23 +177,23 @@ static struct scoop_config spitz_scoop2_setup = { .gpio_base = SPITZ_SCP2_GPIO_BASE, }; -struct platform_device spitzscoop2_device = { +struct platform_device spitz_scoop_2_device = { .name = "sharp-scoop", .id = 1, .dev = { - .platform_data = &spitz_scoop2_setup, + .platform_data = &spitz_scoop_2_setup, }, - .num_resources = ARRAY_SIZE(spitz_scoop2_resources), - .resource = spitz_scoop2_resources, + .num_resources = ARRAY_SIZE(spitz_scoop_2_resources), + .resource = spitz_scoop_2_resources, }; static void __init spitz_scoop_init(void) { - platform_device_register(&spitz_scoop1_device); + platform_device_register(&spitz_scoop_1_device); /* Akita doesn't have the second SCOOP chip */ if (!machine_is_akita()) - platform_device_register(&spitzscoop2_device); + platform_device_register(&spitz_scoop_2_device); } /* Power control is shared with between one of the CF slots and SD */ @@ -250,22 +246,22 @@ static void spitz_pcmcia_pwr(struct device *scoop, uint16_t cpr, int nr) } static struct scoop_pcmcia_dev spitz_pcmcia_scoop[] = { -{ - .dev = &spitzscoop_device.dev, - .irq = SPITZ_IRQ_GPIO_CF_IRQ, - .cd_irq = SPITZ_IRQ_GPIO_CF_CD, - .cd_irq_str = "PCMCIA0 CD", -},{ - .dev = &spitzscoop2_device.dev, - .irq = SPITZ_IRQ_GPIO_CF2_IRQ, - .cd_irq = -1, -}, + { + .dev = &spitz_scoop_1_device.dev, + .irq = SPITZ_IRQ_GPIO_CF_IRQ, + .cd_irq = SPITZ_IRQ_GPIO_CF_CD, + .cd_irq_str = "PCMCIA0 CD", + }, { + .dev = &spitz_scoop_2_device.dev, + .irq = SPITZ_IRQ_GPIO_CF2_IRQ, + .cd_irq = -1, + }, }; static struct scoop_pcmcia_config spitz_pcmcia_config = { - .devs = &spitz_pcmcia_scoop[0], - .num_devs = 2, - .power_ctrl = spitz_pcmcia_pwr, + .devs = &spitz_pcmcia_scoop[0], + .num_devs = 2, + .power_ctrl = spitz_pcmcia_pwr, }; static void __init spitz_pcmcia_init(void) @@ -300,7 +296,7 @@ static inline void spitz_pcmcia_init(void) {} #define SPITZ_KEY_OK KEY_F11 #define SPITZ_KEY_MENU KEY_F12 -static const uint32_t spitzkbd_keymap[] = { +static const uint32_t spitz_keymap[] = { KEY(0, 0, KEY_LEFTCTRL), KEY(0, 1, KEY_1), KEY(0, 2, KEY_3), @@ -367,38 +363,38 @@ static const uint32_t spitzkbd_keymap[] = { KEY(6, 8, KEY_RIGHT), }; -static const struct matrix_keymap_data spitzkbd_keymap_data = { - .keymap = spitzkbd_keymap, - .keymap_size = ARRAY_SIZE(spitzkbd_keymap), +static const struct matrix_keymap_data spitz_keymap_data = { + .keymap = spitz_keymap, + .keymap_size = ARRAY_SIZE(spitz_keymap), }; -static const uint32_t spitzkbd_row_gpios[] = +static const uint32_t spitz_row_gpios[] = { 12, 17, 91, 34, 36, 38, 39 }; -static const uint32_t spitzkbd_col_gpios[] = +static const uint32_t spitz_col_gpios[] = { 88, 23, 24, 25, 26, 27, 52, 103, 107, 108, 114 }; -static struct matrix_keypad_platform_data spitzkbd_pdata = { - .keymap_data = &spitzkbd_keymap_data, - .row_gpios = spitzkbd_row_gpios, - .col_gpios = spitzkbd_col_gpios, - .num_row_gpios = ARRAY_SIZE(spitzkbd_row_gpios), - .num_col_gpios = ARRAY_SIZE(spitzkbd_col_gpios), +static struct matrix_keypad_platform_data spitz_mkp_pdata = { + .keymap_data = &spitz_keymap_data, + .row_gpios = spitz_row_gpios, + .col_gpios = spitz_col_gpios, + .num_row_gpios = ARRAY_SIZE(spitz_row_gpios), + .num_col_gpios = ARRAY_SIZE(spitz_col_gpios), .col_scan_delay_us = 10, .debounce_ms = 10, .wakeup = 1, }; -static struct platform_device spitzkbd_device = { +static struct platform_device spitz_mkp_device = { .name = "matrix-keypad", .id = -1, .dev = { - .platform_data = &spitzkbd_pdata, + .platform_data = &spitz_mkp_pdata, }, }; static void __init spitz_mkp_init(void) { - platform_device_register(&spitzkbd_device); + platform_device_register(&spitz_mkp_device); } #else static inline void spitz_mkp_init(void) {} @@ -474,17 +470,17 @@ static struct gpio_led_platform_data spitz_gpio_leds_info = { .num_leds = ARRAY_SIZE(spitz_gpio_leds), }; -static struct platform_device spitzled_device = { +static struct platform_device spitz_led_device = { .name = "leds-gpio", .id = -1, .dev = { - .platform_data = &spitz_gpio_leds_info, + .platform_data = &spitz_gpio_leds_info, }, }; static void __init spitz_leds_init(void) { - platform_device_register(&spitzled_device); + platform_device_register(&spitz_led_device); } #else static inline void spitz_leds_init(void) {} @@ -494,7 +490,7 @@ static inline void spitz_leds_init(void) {} * SSP Devices ******************************************************************************/ #if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE) -static void spitz_wait_for_hsync(void) +static void spitz_ads7846_wait_for_hsync(void) { while (gpio_get_value(SPITZ_GPIO_HSYNC)) cpu_relax(); @@ -510,7 +506,7 @@ static struct ads7846_platform_data spitz_ads7846_info = { .y_plate_ohms = 486, .pressure_max = 1024, .gpio_pendown = SPITZ_GPIO_TP_INT, - .wait_for_sync = spitz_wait_for_hsync, + .wait_for_sync = spitz_ads7846_wait_for_hsync, }; static struct pxa2xx_spi_chip spitz_ads7846_chip = { @@ -548,26 +544,26 @@ static struct pxa2xx_spi_chip spitz_max1111_chip = { static struct spi_board_info spitz_spi_devices[] = { { - .modalias = "ads7846", - .max_speed_hz = 1200000, - .bus_num = 2, - .chip_select = 0, - .platform_data = &spitz_ads7846_info, - .controller_data= &spitz_ads7846_chip, - .irq = gpio_to_irq(SPITZ_GPIO_TP_INT), + .modalias = "ads7846", + .max_speed_hz = 1200000, + .bus_num = 2, + .chip_select = 0, + .platform_data = &spitz_ads7846_info, + .controller_data = &spitz_ads7846_chip, + .irq = gpio_to_irq(SPITZ_GPIO_TP_INT), }, { - .modalias = "corgi-lcd", - .max_speed_hz = 50000, - .bus_num = 2, - .chip_select = 1, - .platform_data = &spitz_lcdcon_info, - .controller_data= &spitz_lcdcon_chip, + .modalias = "corgi-lcd", + .max_speed_hz = 50000, + .bus_num = 2, + .chip_select = 1, + .platform_data = &spitz_lcdcon_info, + .controller_data = &spitz_lcdcon_chip, }, { - .modalias = "max1111", - .max_speed_hz = 450000, - .bus_num = 2, - .chip_select = 2, - .controller_data= &spitz_max1111_chip, + .modalias = "max1111", + .max_speed_hz = 450000, + .bus_num = 2, + .chip_select = 2, + .controller_data = &spitz_max1111_chip, }, }; @@ -575,7 +571,7 @@ static struct pxa2xx_spi_master spitz_spi_info = { .num_chipselect = 3, }; -static void __init spitz_init_spi(void) +static void __init spitz_spi_init(void) { struct corgi_lcd_platform_data *lcd_data = &spitz_lcdcon_info; @@ -588,7 +584,7 @@ static void __init spitz_init_spi(void) spi_register_board_info(ARRAY_AND_SIZE(spitz_spi_devices)); } #else -static inline void spitz_init_spi(void) {} +static inline void spitz_spi_init(void) {} #endif /****************************************************************************** @@ -612,7 +608,7 @@ static void spitz_mci_setpower(struct device *dev, unsigned int vdd) static struct pxamci_platform_data spitz_mci_platform_data = { .detect_delay_ms = 250, .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .setpower = spitz_mci_setpower, + .setpower = spitz_mci_setpower, .gpio_card_detect = SPITZ_GPIO_nSD_DETECT, .gpio_card_ro = SPITZ_GPIO_nSD_WP, .gpio_power = -1, @@ -691,31 +687,31 @@ static inline void spitz_irda_init(void) {} ******************************************************************************/ #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) static struct pxafb_mode_info spitz_pxafb_modes[] = { -{ - .pixclock = 19231, - .xres = 480, - .yres = 640, - .bpp = 16, - .hsync_len = 40, - .left_margin = 46, - .right_margin = 125, - .vsync_len = 3, - .upper_margin = 1, - .lower_margin = 0, - .sync = 0, -},{ - .pixclock = 134617, - .xres = 240, - .yres = 320, - .bpp = 16, - .hsync_len = 20, - .left_margin = 20, - .right_margin = 46, - .vsync_len = 2, - .upper_margin = 1, - .lower_margin = 0, - .sync = 0, -}, + { + .pixclock = 19231, + .xres = 480, + .yres = 640, + .bpp = 16, + .hsync_len = 40, + .left_margin = 46, + .right_margin = 125, + .vsync_len = 3, + .upper_margin = 1, + .lower_margin = 0, + .sync = 0, + }, { + .pixclock = 134617, + .xres = 240, + .yres = 320, + .bpp = 16, + .hsync_len = 20, + .left_margin = 20, + .right_margin = 46, + .vsync_len = 2, + .upper_margin = 1, + .lower_margin = 0, + .sync = 0, + }, }; static struct pxafb_mach_info spitz_pxafb_info = { @@ -737,17 +733,15 @@ static inline void spitz_lcd_init(void) {} * Framebuffer ******************************************************************************/ #if defined(CONFIG_MTD_NAND_SHARPSL) || defined(CONFIG_MTD_NAND_SHARPSL_MODULE) -static struct mtd_partition sharpsl_nand_partitions[] = { +static struct mtd_partition spitz_nand_partitions[] = { { .name = "System Area", .offset = 0, .size = 7 * 1024 * 1024, - }, - { + }, { .name = "Root Filesystem", .offset = 7 * 1024 * 1024, - }, - { + }, { .name = "Home Filesystem", .offset = MTDPART_OFS_APPEND, .size = MTDPART_SIZ_FULL, @@ -756,14 +750,14 @@ static struct mtd_partition sharpsl_nand_partitions[] = { static uint8_t scan_ff_pattern[] = { 0xff, 0xff }; -static struct nand_bbt_descr sharpsl_bbt = { - .options = 0, - .offs = 4, - .len = 2, - .pattern = scan_ff_pattern +static struct nand_bbt_descr spitz_nand_bbt = { + .options = 0, + .offs = 4, + .len = 2, + .pattern = scan_ff_pattern }; -static struct nand_ecclayout spitz_akita_oobinfo = { +static struct nand_ecclayout akita_oobinfo = { .oobfree = { {0x08, 0x09} }, .eccbytes = 24, .eccpos = { @@ -773,13 +767,13 @@ static struct nand_ecclayout spitz_akita_oobinfo = { }, }; -static struct sharpsl_nand_platform_data sharpsl_nand_platform_data = { - .badblock_pattern = &sharpsl_bbt, - .partitions = sharpsl_nand_partitions, - .nr_partitions = ARRAY_SIZE(sharpsl_nand_partitions), +static struct sharpsl_nand_platform_data spitz_nand_pdata = { + .badblock_pattern = &spitz_nand_bbt, + .partitions = spitz_nand_partitions, + .nr_partitions = ARRAY_SIZE(spitz_nand_partitions), }; -static struct resource sharpsl_nand_resources[] = { +static struct resource spitz_nand_resources[] = { { .start = PXA_CS3_PHYS, .end = PXA_CS3_PHYS + SZ_4K - 1, @@ -787,31 +781,31 @@ static struct resource sharpsl_nand_resources[] = { }, }; -static struct platform_device sharpsl_nand_device = { +static struct platform_device spitz_nand_device = { .name = "sharpsl-nand", .id = -1, - .resource = sharpsl_nand_resources, - .num_resources = ARRAY_SIZE(sharpsl_nand_resources), + .resource = spitz_nand_resources, + .num_resources = ARRAY_SIZE(spitz_nand_resources), .dev = { - .platform_data = &sharpsl_nand_platform_data, + .platform_data = &spitz_nand_pdata, } }; static void __init spitz_nand_init(void) { if (machine_is_spitz()) { - sharpsl_nand_partitions[1].size = 5 * 1024 * 1024; + spitz_nand_partitions[1].size = 5 * 1024 * 1024; } else if (machine_is_akita()) { - sharpsl_nand_partitions[1].size = 58 * 1024 * 1024; - sharpsl_nand_bbt.len = 1; - sharpsl_nand_pdata.ecc_layout = &spitz_akita_oobinfo; + spitz_nand_partitions[1].size = 58 * 1024 * 1024; + spitz_nand_bbt.len = 1; + spitz_nand_pdata.ecc_layout = &akita_oobinfo; } else if (machine_is_borzoi()) { - sharpsl_nand_partitions[1].size = 32 * 1024 * 1024; - sharpsl_nand_bbt.len = 1; - sharpsl_nand_pdata.ecc_layout = &spitz_akita_oobinfo; + spitz_nand_partitions[1].size = 32 * 1024 * 1024; + spitz_nand_bbt.len = 1; + spitz_nand_pdata.ecc_layout = &akita_oobinfo; } - platform_device_register(&sharpsl_nand_device); + platform_device_register(&spitz_nand_device); } #else static inline void spitz_nand_init(void) {} @@ -821,7 +815,7 @@ static inline void spitz_nand_init(void) {} * NOR Flash ******************************************************************************/ #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) -static struct mtd_partition sharpsl_rom_parts[] = { +static struct mtd_partition spitz_rom_parts[] = { { .name ="Boot PROM Filesystem", .offset = 0x00140000, @@ -829,13 +823,13 @@ static struct mtd_partition sharpsl_rom_parts[] = { }, }; -static struct physmap_flash_data sharpsl_rom_data = { +static struct physmap_flash_data spitz_rom_data = { .width = 2, - .nr_parts = ARRAY_SIZE(sharpsl_rom_parts), - .parts = sharpsl_rom_parts, + .nr_parts = ARRAY_SIZE(spitz_rom_parts), + .parts = spitz_rom_parts, }; -static struct resource sharpsl_rom_resources[] = { +static struct resource spitz_rom_resources[] = { { .start = PXA_CS0_PHYS, .end = PXA_CS0_PHYS + SZ_8M - 1, @@ -843,19 +837,19 @@ static struct resource sharpsl_rom_resources[] = { }, }; -static struct platform_device sharpsl_rom_device = { - .name = "physmap-flash", - .id = -1, - .resource = sharpsl_rom_resources, - .num_resources = ARRAY_SIZE(sharpsl_rom_resources), +static struct platform_device spitz_rom_device = { + .name = "physmap-flash", + .id = -1, + .resource = spitz_rom_resources, + .num_resources = ARRAY_SIZE(spitz_rom_resources), .dev = { - .platform_data = &sharpsl_rom_data, + .platform_data = &spitz_rom_data, }, }; static void __init spitz_nor_init(void) { - platform_device_register(&sharpsl_rom_device); + platform_device_register(&spitz_rom_device); } #else static inline void spitz_nor_init(void) {} @@ -959,7 +953,7 @@ static void __init spitz_init(void) pxa_set_btuart_info(NULL); pxa_set_stuart_info(NULL); - spitz_init_spi(); + spitz_spi_init(); spitz_scoop_init(); spitz_mkp_init(); spitz_keys_init(); @@ -974,7 +968,7 @@ static void __init spitz_init(void) spitz_i2c_init(); } -static void __init fixup_spitz(struct machine_desc *desc, +static void __init spitz_fixup(struct machine_desc *desc, struct tag *tags, char **cmdline, struct meminfo *mi) { sharpsl_save_param(); @@ -988,7 +982,7 @@ static void __init fixup_spitz(struct machine_desc *desc, MACHINE_START(SPITZ, "SHARP Spitz") .phys_io = 0x40000000, .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, - .fixup = fixup_spitz, + .fixup = spitz_fixup, .map_io = pxa_map_io, .init_irq = pxa27x_init_irq, .init_machine = spitz_init, @@ -1000,7 +994,7 @@ MACHINE_END MACHINE_START(BORZOI, "SHARP Borzoi") .phys_io = 0x40000000, .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, - .fixup = fixup_spitz, + .fixup = spitz_fixup, .map_io = pxa_map_io, .init_irq = pxa27x_init_irq, .init_machine = spitz_init, @@ -1012,7 +1006,7 @@ MACHINE_END MACHINE_START(AKITA, "SHARP Akita") .phys_io = 0x40000000, .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, - .fixup = fixup_spitz, + .fixup = spitz_fixup, .map_io = pxa_map_io, .init_irq = pxa27x_init_irq, .init_machine = spitz_init, |