summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/isdn/mISDN/dsp_cmx.c2
-rw-r--r--drivers/scsi/lpfc/lpfc_init.c2
-rw-r--r--drivers/usb/gadget/langwell_udc.c4
-rw-r--r--drivers/usb/host/fhci-hcd.c4
-rw-r--r--drivers/usb/host/fhci-tds.c4
5 files changed, 8 insertions, 8 deletions
diff --git a/drivers/isdn/mISDN/dsp_cmx.c b/drivers/isdn/mISDN/dsp_cmx.c
index 76d9e67..309bacf 100644
--- a/drivers/isdn/mISDN/dsp_cmx.c
+++ b/drivers/isdn/mISDN/dsp_cmx.c
@@ -112,7 +112,7 @@
* Disable rx-data:
* If cmx is realized in hardware, rx data will be disabled if requested by
* the upper layer. If dtmf decoding is done by software and enabled, rx data
- * will not be diabled but blocked to the upper layer.
+ * will not be disabled but blocked to the upper layer.
*
* HFC conference engine:
* If it is possible to realize all features using hardware, hardware will be
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index b306579..a921f16 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -7661,7 +7661,7 @@ lpfc_pci_remove_one_s3(struct pci_dev *pdev)
* the HBA.
*/
- /* HBA interrupt will be diabled after this call */
+ /* HBA interrupt will be disabled after this call */
lpfc_sli_hba_down(phba);
/* Stop kthread signal shall trigger work_done one more time */
kthread_stop(phba->worker_thread);
diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c
index b8ec954..dad278f 100644
--- a/drivers/usb/gadget/langwell_udc.c
+++ b/drivers/usb/gadget/langwell_udc.c
@@ -3063,7 +3063,7 @@ static void langwell_udc_remove(struct pci_dev *pdev)
kfree(dev->ep);
- /* diable IRQ handler */
+ /* disable IRQ handler */
if (dev->got_irq)
free_irq(pdev->irq, dev);
@@ -3383,7 +3383,7 @@ static int langwell_udc_suspend(struct pci_dev *pdev, pm_message_t state)
/* disable interrupt and set controller to stop state */
langwell_udc_stop(dev);
- /* diable IRQ handler */
+ /* disable IRQ handler */
if (dev->got_irq)
free_irq(pdev->irq, dev);
dev->got_irq = 0;
diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c
index 20092a2..12fd184 100644
--- a/drivers/usb/host/fhci-hcd.c
+++ b/drivers/usb/host/fhci-hcd.c
@@ -98,13 +98,13 @@ void fhci_usb_enable_interrupt(struct fhci_usb *usb)
usb->intr_nesting_cnt--;
}
-/* diable the usb interrupt */
+/* disable the usb interrupt */
void fhci_usb_disable_interrupt(struct fhci_usb *usb)
{
struct fhci_hcd *fhci = usb->fhci;
if (usb->intr_nesting_cnt == 0) {
- /* diable the timer interrupt */
+ /* disable the timer interrupt */
disable_irq_nosync(fhci->timer->irq);
/* disable the usb interrupt */
diff --git a/drivers/usb/host/fhci-tds.c b/drivers/usb/host/fhci-tds.c
index 7be548c..38fe058 100644
--- a/drivers/usb/host/fhci-tds.c
+++ b/drivers/usb/host/fhci-tds.c
@@ -271,8 +271,8 @@ void fhci_init_ep_registers(struct fhci_usb *usb, struct endpoint *ep,
/*
* Collect the submitted frames and inform the application about them
- * It is also prepearing the TDs for new frames. If the Tx interrupts
- * are diabled, the application should call that routine to get
+ * It is also preparing the TDs for new frames. If the Tx interrupts
+ * are disabled, the application should call that routine to get
* confirmation about the submitted frames. Otherwise, the routine is
* called frome the interrupt service routine during the Tx interrupt.
* In that case the application is informed by calling the application
OpenPOWER on IntegriCloud