diff options
41 files changed, 197 insertions, 450 deletions
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c index 98aee32..829a96d 100644 --- a/arch/arm/kernel/time.c +++ b/arch/arm/kernel/time.c @@ -11,25 +11,26 @@ * This file contains the ARM-specific time handling details: * reading the RTC at bootup, etc... */ +#include <linux/clk-provider.h> +#include <linux/clocksource.h> +#include <linux/errno.h> #include <linux/export.h> -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/time.h> #include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/profile.h> #include <linux/sched.h> +#include <linux/sched_clock.h> #include <linux/smp.h> +#include <linux/time.h> #include <linux/timex.h> -#include <linux/errno.h> -#include <linux/profile.h> #include <linux/timer.h> -#include <linux/clocksource.h> -#include <linux/irq.h> -#include <linux/sched_clock.h> -#include <asm/thread_info.h> -#include <asm/stacktrace.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> +#include <asm/stacktrace.h> +#include <asm/thread_info.h> #if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE) || \ defined(CONFIG_NVRAM) || defined(CONFIG_NVRAM_MODULE) @@ -116,8 +117,12 @@ int __init register_persistent_clock(clock_access_fn read_boot, void __init time_init(void) { - if (machine_desc->init_time) + if (machine_desc->init_time) { machine_desc->init_time(); - else + } else { +#ifdef CONFIG_COMMON_CLK + of_clk_init(NULL); +#endif clocksource_of_init(); + } } diff --git a/arch/arm/mach-bcm/board_bcm281xx.c b/arch/arm/mach-bcm/board_bcm281xx.c index 8d9f931..26b2390 100644 --- a/arch/arm/mach-bcm/board_bcm281xx.c +++ b/arch/arm/mach-bcm/board_bcm281xx.c @@ -68,7 +68,6 @@ static void __init board_init(void) static const char * const bcm11351_dt_compat[] = { "brcm,bcm11351", NULL, }; DT_MACHINE_START(BCM11351_DT, "Broadcom Application Processor") - .init_time = clocksource_of_init, .init_machine = board_init, .restart = bcm_kona_restart, .dt_compat = bcm11351_dt_compat, diff --git a/arch/arm/mach-bcm2835/bcm2835.c b/arch/arm/mach-bcm2835/bcm2835.c index 40686d7..d50135b 100644 --- a/arch/arm/mach-bcm2835/bcm2835.c +++ b/arch/arm/mach-bcm2835/bcm2835.c @@ -18,7 +18,6 @@ #include <linux/of_address.h> #include <linux/of_platform.h> #include <linux/clk/bcm2835.h> -#include <linux/clocksource.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -134,7 +133,6 @@ DT_MACHINE_START(BCM2835, "BCM2835") .init_irq = bcm2835_init_irq, .handle_irq = bcm2835_handle_irq, .init_machine = bcm2835_init, - .init_time = clocksource_of_init, .restart = bcm2835_restart, .dt_compat = bcm2835_compat MACHINE_END diff --git a/arch/arm/mach-dove/board-dt.c b/arch/arm/mach-dove/board-dt.c index 49f72a8..ddb8663 100644 --- a/arch/arm/mach-dove/board-dt.c +++ b/arch/arm/mach-dove/board-dt.c @@ -10,17 +10,13 @@ #include <linux/init.h> #include <linux/clk-provider.h> -#include <linux/clocksource.h> -#include <linux/irqchip.h> #include <linux/of.h> #include <linux/of_platform.h> -#include <linux/platform_data/usb-ehci-orion.h> #include <asm/hardware/cache-tauros2.h> #include <asm/mach/arch.h> #include <mach/dove.h> #include <mach/pm.h> #include <plat/common.h> -#include <plat/irq.h> #include "common.h" /* @@ -45,12 +41,6 @@ static void __init dove_legacy_clk_init(void) of_clk_get_from_provider(&clkspec)); } -static void __init dove_dt_time_init(void) -{ - of_clk_init(NULL); - clocksource_of_init(); -} - static void __init dove_dt_init_early(void) { mvebu_mbus_init("marvell,dove-mbus", @@ -84,7 +74,6 @@ static const char * const dove_dt_board_compat[] = { DT_MACHINE_START(DOVE_DT, "Marvell Dove (Flattened Device Tree)") .map_io = dove_map_io, .init_early = dove_dt_init_early, - .init_time = dove_dt_time_init, .init_machine = dove_dt_init, .restart = dove_restart, .dt_compat = dove_dt_board_compat, diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index ba95e5d..a4e7ba8 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -26,8 +26,6 @@ #include <linux/export.h> #include <linux/irqdomain.h> #include <linux/of_address.h> -#include <linux/clocksource.h> -#include <linux/clk-provider.h> #include <linux/irqchip/arm-gic.h> #include <linux/irqchip/chained_irq.h> @@ -367,12 +365,6 @@ static void __init exynos5_map_io(void) iotable_init(exynos5250_iodesc, ARRAY_SIZE(exynos5250_iodesc)); } -void __init exynos_init_time(void) -{ - of_clk_init(NULL); - clocksource_of_init(); -} - struct bus_type exynos_subsys = { .name = "exynos-core", .dev_name = "exynos-core", diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index 8646a14..f0fa205 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -16,7 +16,6 @@ #include <linux/of.h> void mct_init(void __iomem *base, int irq_g0, int irq_l0, int irq_l1); -void exynos_init_time(void); struct map_desc; void exynos_init_io(void); diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c index 0099c6c..6858d73 100644 --- a/arch/arm/mach-exynos/mach-exynos4-dt.c +++ b/arch/arm/mach-exynos/mach-exynos4-dt.c @@ -16,7 +16,6 @@ #include <linux/of_fdt.h> #include <linux/serial_core.h> #include <linux/memblock.h> -#include <linux/clocksource.h> #include <asm/mach/arch.h> #include <plat/mfc.h> @@ -54,7 +53,6 @@ DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)") .init_early = exynos_firmware_init, .init_machine = exynos4_dt_machine_init, .init_late = exynos_init_late, - .init_time = exynos_init_time, .dt_compat = exynos4_dt_compat, .restart = exynos4_restart, .reserve = exynos4_reserve, diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c index f874b77..bac2105 100644 --- a/arch/arm/mach-exynos/mach-exynos5-dt.c +++ b/arch/arm/mach-exynos/mach-exynos5-dt.c @@ -13,7 +13,6 @@ #include <linux/of_fdt.h> #include <linux/memblock.h> #include <linux/io.h> -#include <linux/clocksource.h> #include <asm/mach/arch.h> #include <mach/regs-pmu.h> @@ -76,7 +75,6 @@ DT_MACHINE_START(EXYNOS5_DT, "SAMSUNG EXYNOS5 (Flattened Device Tree)") .map_io = exynos_init_io, .init_machine = exynos5_dt_machine_init, .init_late = exynos_init_late, - .init_time = exynos_init_time, .dt_compat = exynos5_dt_compat, .restart = exynos5_restart, .reserve = exynos5_reserve, diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c index 0c49beb..b3d7e56 100644 --- a/arch/arm/mach-highbank/highbank.c +++ b/arch/arm/mach-highbank/highbank.c @@ -24,7 +24,6 @@ #include <linux/of_platform.h> #include <linux/of_address.h> #include <linux/amba/bus.h> -#include <linux/clk-provider.h> #include <linux/platform_device.h> #include <asm/psci.h> @@ -71,20 +70,6 @@ static void __init highbank_init_irq(void) } } -static void __init highbank_timer_init(void) -{ - struct device_node *np; - - /* Map system registers */ - np = of_find_compatible_node(NULL, NULL, "calxeda,hb-sregs"); - sregs_base = of_iomap(np, 0); - WARN_ON(!sregs_base); - - of_clk_init(NULL); - - clocksource_of_init(); -} - static void highbank_power_off(void) { highbank_set_pwr_shutdown(); @@ -147,6 +132,13 @@ static struct platform_device highbank_cpuidle_device = { static void __init highbank_init(void) { + struct device_node *np; + + /* Map system registers */ + np = of_find_compatible_node(NULL, NULL, "calxeda,hb-sregs"); + sregs_base = of_iomap(np, 0); + WARN_ON(!sregs_base); + pm_power_off = highbank_power_off; highbank_pm_init(); @@ -170,7 +162,6 @@ DT_MACHINE_START(HIGHBANK, "Highbank") .dma_zone_size = (4ULL * SZ_1G), #endif .init_irq = highbank_init_irq, - .init_time = highbank_timer_init, .init_machine = highbank_init, .dt_compat = highbank_match, .restart = highbank_restart, diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c index 7c0dc45..ceaac9c 100644 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ b/arch/arm/mach-imx/clk-imx51-imx53.c @@ -11,6 +11,7 @@ #include <linux/clk.h> #include <linux/io.h> #include <linux/clkdev.h> +#include <linux/clk-provider.h> #include <linux/of.h> #include <linux/err.h> @@ -131,8 +132,6 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, { int i; - of_clk_init(NULL); - clk[dummy] = imx_clk_fixed("dummy", 0); clk[ckil] = imx_obtain_fixed_clock("ckil", rate_ckil); clk[osc] = imx_obtain_fixed_clock("osc", rate_osc); @@ -465,12 +464,16 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, return 0; } -int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, - unsigned long rate_ckih1, unsigned long rate_ckih2) +static void __init mx51_clocks_init_dt(struct device_node *np) +{ + mx51_clocks_init(0, 0, 0, 0); +} +CLK_OF_DECLARE(imx51_ccm, "fsl,imx51-ccm", mx51_clocks_init_dt); + +static void __init mx53_clocks_init(struct device_node *np) { int i; unsigned long r; - struct device_node *np; clk[pll1_sw] = imx_clk_pllv2("pll1_sw", "osc", MX53_DPLL1_BASE); clk[pll2_sw] = imx_clk_pllv2("pll2_sw", "osc", MX53_DPLL2_BASE); @@ -529,12 +532,11 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, pr_err("i.MX53 clk %d: register failed with %ld\n", i, PTR_ERR(clk[i])); - np = of_find_compatible_node(NULL, NULL, "fsl,imx53-ccm"); clk_data.clks = clk; clk_data.clk_num = ARRAY_SIZE(clk); of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); - mx5_clocks_common_init(rate_ckil, rate_osc, rate_ckih1, rate_ckih2); + mx5_clocks_common_init(0, 0, 0, 0); clk_register_clkdev(clk[vpu_gate], NULL, "imx53-vpu.0"); clk_register_clkdev(clk[i2c3_gate], NULL, "imx21-i2c.2"); @@ -566,16 +568,5 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, r = clk_round_rate(clk[usboh3_per_gate], 54000000); clk_set_rate(clk[usboh3_per_gate], r); - - return 0; -} - -int __init mx51_clocks_init_dt(void) -{ - return mx51_clocks_init(0, 0, 0, 0); -} - -int __init mx53_clocks_init_dt(void) -{ - return mx53_clocks_init(0, 0, 0, 0); } +CLK_OF_DECLARE(imx53_ccm, "fsl,imx53-ccm", mx53_clocks_init); diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index 4517fd7..28e8ca0 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -63,13 +63,9 @@ extern int mx31_clocks_init(unsigned long fref); extern int mx35_clocks_init(void); extern int mx51_clocks_init(unsigned long ckil, unsigned long osc, unsigned long ckih1, unsigned long ckih2); -extern int mx53_clocks_init(unsigned long ckil, unsigned long osc, - unsigned long ckih1, unsigned long ckih2); extern int mx25_clocks_init_dt(void); extern int mx27_clocks_init_dt(void); extern int mx31_clocks_init_dt(void); -extern int mx51_clocks_init_dt(void); -extern int mx53_clocks_init_dt(void); extern struct platform_device *mxc_register_gpio(char *name, int id, resource_size_t iobase, resource_size_t iosize, int irq, int irq_high); extern void mxc_set_cpu_type(unsigned int type); diff --git a/arch/arm/mach-imx/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c index 53e43e5..bece8a6 100644 --- a/arch/arm/mach-imx/imx51-dt.c +++ b/arch/arm/mach-imx/imx51-dt.c @@ -34,17 +34,11 @@ static const char *imx51_dt_board_compat[] __initdata = { NULL }; -static void __init imx51_timer_init(void) -{ - mx51_clocks_init_dt(); -} - DT_MACHINE_START(IMX51_DT, "Freescale i.MX51 (Device Tree Support)") .map_io = mx51_map_io, .init_early = imx51_init_early, .init_irq = mx51_init_irq, .handle_irq = imx51_handle_irq, - .init_time = imx51_timer_init, .init_machine = imx51_dt_init, .init_late = imx51_init_late, .dt_compat = imx51_dt_board_compat, diff --git a/arch/arm/mach-imx/mach-imx53.c b/arch/arm/mach-imx/mach-imx53.c index 98c5894..c9c4d8d 100644 --- a/arch/arm/mach-imx/mach-imx53.c +++ b/arch/arm/mach-imx/mach-imx53.c @@ -36,17 +36,11 @@ static const char *imx53_dt_board_compat[] __initdata = { NULL }; -static void __init imx53_timer_init(void) -{ - mx53_clocks_init_dt(); -} - DT_MACHINE_START(IMX53_DT, "Freescale i.MX53 (Device Tree Support)") .map_io = mx53_map_io, .init_early = imx53_init_early, .init_irq = mx53_init_irq, .handle_irq = imx53_handle_irq, - .init_time = imx53_timer_init, .init_machine = imx53_dt_init, .init_late = imx53_init_late, .dt_compat = imx53_dt_board_compat, diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 90372a2..3be0fa0 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -11,9 +11,7 @@ */ #include <linux/clk.h> -#include <linux/clk-provider.h> #include <linux/clkdev.h> -#include <linux/clocksource.h> #include <linux/cpu.h> #include <linux/delay.h> #include <linux/export.h> @@ -192,6 +190,9 @@ static void __init imx6q_1588_init(void) static void __init imx6q_init_machine(void) { + imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q", + imx6q_revision()); + imx6q_enet_phy_init(); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); @@ -293,14 +294,6 @@ static void __init imx6q_init_irq(void) irqchip_init(); } -static void __init imx6q_timer_init(void) -{ - of_clk_init(NULL); - clocksource_of_init(); - imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q", - imx6q_revision()); -} - static const char *imx6q_dt_compat[] __initdata = { "fsl,imx6dl", "fsl,imx6q", @@ -311,7 +304,6 @@ DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad/DualLite (Device Tree)") .smp = smp_ops(imx_smp_ops), .map_io = imx6q_map_io, .init_irq = imx6q_init_irq, - .init_time = imx6q_timer_init, .init_machine = imx6q_init_machine, .init_late = imx6q_init_late, .dt_compat = imx6q_dt_compat, diff --git a/arch/arm/mach-imx/mach-imx6sl.c b/arch/arm/mach-imx/mach-imx6sl.c index 0d75dc5..c70bd7c 100644 --- a/arch/arm/mach-imx/mach-imx6sl.c +++ b/arch/arm/mach-imx/mach-imx6sl.c @@ -7,7 +7,6 @@ * */ -#include <linux/clk-provider.h> #include <linux/irqchip.h> #include <linux/of.h> #include <linux/of_platform.h> @@ -31,11 +30,6 @@ static void __init imx6sl_init_irq(void) irqchip_init(); } -static void __init imx6sl_timer_init(void) -{ - of_clk_init(NULL); -} - static const char *imx6sl_dt_compat[] __initdata = { "fsl,imx6sl", NULL, @@ -44,7 +38,6 @@ static const char *imx6sl_dt_compat[] __initdata = { DT_MACHINE_START(IMX6SL, "Freescale i.MX6 SoloLite (Device Tree)") .map_io = debug_ll_io_init, .init_irq = imx6sl_init_irq, - .init_time = imx6sl_timer_init, .init_machine = imx6sl_init_machine, .dt_compat = imx6sl_dt_compat, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-vf610.c b/arch/arm/mach-imx/mach-vf610.c index 816991d..af0cb8a 100644 --- a/arch/arm/mach-imx/mach-vf610.c +++ b/arch/arm/mach-imx/mach-vf610.c @@ -8,9 +8,7 @@ */ #include <linux/of_platform.h> -#include <linux/clocksource.h> #include <linux/irqchip.h> -#include <linux/clk-provider.h> #include <asm/mach/arch.h> #include <asm/hardware/cache-l2x0.h> @@ -28,12 +26,6 @@ static void __init vf610_init_irq(void) irqchip_init(); } -static void __init vf610_init_time(void) -{ - of_clk_init(NULL); - clocksource_of_init(); -} - static const char *vf610_dt_compat[] __initdata = { "fsl,vf610", NULL, @@ -41,7 +33,6 @@ static const char *vf610_dt_compat[] __initdata = { DT_MACHINE_START(VYBRID_VF610, "Freescale Vybrid VF610 (Device Tree)") .init_irq = vf610_init_irq, - .init_time = vf610_init_time, .init_machine = vf610_init_machine, .dt_compat = vf610_dt_compat, .restart = mxc_restart, diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index 27c1877..c9f6fd2 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -17,7 +17,6 @@ #include <linux/of_net.h> #include <linux/of_platform.h> #include <linux/clk-provider.h> -#include <linux/clocksource.h> #include <linux/dma-mapping.h> #include <linux/irqchip.h> #include <linux/kexec.h> @@ -139,12 +138,6 @@ eth_fixup_skip: } } -static void __init kirkwood_dt_time_init(void) -{ - of_clk_init(NULL); - clocksource_of_init(); -} - static void __init kirkwood_dt_init(void) { pr_info("Kirkwood: %s, TCLK=%d.\n", kirkwood_id(), kirkwood_tclk); @@ -188,7 +181,6 @@ static const char * const kirkwood_dt_board_compat[] = { DT_MACHINE_START(KIRKWOOD_DT, "Marvell Kirkwood (Flattened Device Tree)") /* Maintainer: Jason Cooper <jason@lakedaemon.net> */ .map_io = kirkwood_map_io, - .init_time = kirkwood_dt_time_init, .init_machine = kirkwood_dt_init, .restart = kirkwood_restart, .dt_compat = kirkwood_dt_board_compat, diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c index 98f6e2a..cc511a4 100644 --- a/arch/arm/mach-mxs/mach-mxs.c +++ b/arch/arm/mach-mxs/mach-mxs.c @@ -13,8 +13,6 @@ #include <linux/clk.h> #include <linux/clk/mxs.h> #include <linux/clkdev.h> -#include <linux/clocksource.h> -#include <linux/clk-provider.h> #include <linux/delay.h> #include <linux/err.h> #include <linux/gpio.h> @@ -490,16 +488,6 @@ static void mxs_restart(enum reboot_mode mode, const char *cmd) soft_restart(0); } -static void __init mxs_timer_init(void) -{ - if (of_machine_is_compatible("fsl,imx23")) - mx23_clocks_init(); - else - mx28_clocks_init(); - of_clk_init(NULL); - clocksource_of_init(); -} - static const char *mxs_dt_compat[] __initdata = { "fsl,imx28", "fsl,imx23", @@ -508,7 +496,6 @@ static const char *mxs_dt_compat[] __initdata = { DT_MACHINE_START(MXS, "Freescale MXS (Device Tree)") .handle_irq = icoll_handle_irq, - .init_time = mxs_timer_init, .init_machine = mxs_machine_init, .init_late = mxs_pm_init, .dt_compat = mxs_dt_compat, diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c index 13e0df9..53fbf63 100644 --- a/arch/arm/mach-nomadik/cpu-8815.c +++ b/arch/arm/mach-nomadik/cpu-8815.c @@ -25,8 +25,6 @@ #include <linux/slab.h> #include <linux/irq.h> #include <linux/dma-mapping.h> -#include <linux/platform_data/clk-nomadik.h> -#include <linux/clocksource.h> #include <linux/of_irq.h> #include <linux/of_gpio.h> #include <linux/of_address.h> @@ -113,39 +111,6 @@ static void cpu8815_restart(enum reboot_mode mode, const char *cmd) writel(1, srcbase + 0x18); } -/* Initial value for SRC control register: all timers use MXTAL/8 source */ -#define SRC_CR_INIT_MASK 0x00007fff -#define SRC_CR_INIT_VAL 0x2aaa8000 - -static void __init cpu8815_timer_init_of(void) -{ - struct device_node *mtu; - void __iomem *base; - int irq; - u32 src_cr; - - /* We need this to be up now */ - nomadik_clk_init(); - - mtu = of_find_node_by_path("/mtu@101e2000"); - if (!mtu) - return; - base = of_iomap(mtu, 0); - if (WARN_ON(!base)) - return; - irq = irq_of_parse_and_map(mtu, 0); - - pr_info("Remapped MTU @ %p, irq: %d\n", base, irq); - - /* Configure timer sources in "system reset controller" ctrl reg */ - src_cr = readl(base); - src_cr &= SRC_CR_INIT_MASK; - src_cr |= SRC_CR_INIT_VAL; - writel(src_cr, base); - - clocksource_of_init(); -} - static struct fsmc_nand_timings cpu8815_nand_timings = { .thiz = 0, .thold = 0x10, @@ -259,7 +224,6 @@ static const char * cpu8815_board_compat[] = { DT_MACHINE_START(NOMADIK_DT, "Nomadik STn8815") .map_io = cpu8815_map_io, - .init_time = cpu8815_timer_init_of, .init_machine = cpu8815_init_of, .restart = cpu8815_restart, .dt_compat = cpu8815_board_compat, diff --git a/arch/arm/mach-nspire/nspire.c b/arch/arm/mach-nspire/nspire.c index 99e2609..4b2ed2e 100644 --- a/arch/arm/mach-nspire/nspire.c +++ b/arch/arm/mach-nspire/nspire.c @@ -14,11 +14,9 @@ #include <linux/of_platform.h> #include <linux/irqchip.h> #include <linux/irqchip/arm-vic.h> -#include <linux/clk-provider.h> #include <linux/clkdev.h> #include <linux/amba/bus.h> #include <linux/amba/clcd.h> -#include <linux/clocksource.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> @@ -65,12 +63,6 @@ static void __init nspire_init(void) nspire_auxdata, NULL); } -static void __init nspire_init_time(void) -{ - of_clk_init(NULL); - clocksource_of_init(); -} - static void nspire_restart(char mode, const char *cmd) { void __iomem *base = ioremap(NSPIRE_MISC_PHYS_BASE, SZ_4K); @@ -83,7 +75,6 @@ static void nspire_restart(char mode, const char *cmd) DT_MACHINE_START(NSPIRE, "TI-NSPIRE") .dt_compat = nspire_dt_match, .map_io = nspire_map_io, - .init_time = nspire_init_time, .init_machine = nspire_init, .restart = nspire_restart, MACHINE_END diff --git a/arch/arm/mach-prima2/common.c b/arch/arm/mach-prima2/common.c index e110b6d..d49aff7 100644 --- a/arch/arm/mach-prima2/common.c +++ b/arch/arm/mach-prima2/common.c @@ -6,7 +6,6 @@ * Licensed under GPLv2 or later. */ -#include <linux/clocksource.h> #include <linux/init.h> #include <linux/kernel.h> #include <asm/sizes.h> @@ -21,13 +20,6 @@ void __init sirfsoc_init_late(void) sirfsoc_pm_init(); } -static __init void sirfsoc_init_time(void) -{ - /* initialize clocking early, we want to set the OS timer */ - sirfsoc_of_clk_init(); - clocksource_of_init(); -} - static __init void sirfsoc_map_io(void) { sirfsoc_map_lluart(); @@ -43,7 +35,6 @@ static const char *atlas6_dt_match[] __initdata = { DT_MACHINE_START(ATLAS6_DT, "Generic ATLAS6 (Flattened Device Tree)") /* Maintainer: Barry Song <baohua.song@csr.com> */ .map_io = sirfsoc_map_io, - .init_time = sirfsoc_init_time, .init_late = sirfsoc_init_late, .dt_compat = atlas6_dt_match, .restart = sirfsoc_restart, @@ -59,7 +50,6 @@ static const char *prima2_dt_match[] __initdata = { DT_MACHINE_START(PRIMA2_DT, "Generic PRIMA2 (Flattened Device Tree)") /* Maintainer: Barry Song <baohua.song@csr.com> */ .map_io = sirfsoc_map_io, - .init_time = sirfsoc_init_time, .dma_zone_size = SZ_256M, .init_late = sirfsoc_init_late, .dt_compat = prima2_dt_match, @@ -77,7 +67,6 @@ DT_MACHINE_START(MARCO_DT, "Generic MARCO (Flattened Device Tree)") /* Maintainer: Barry Song <baohua.song@csr.com> */ .smp = smp_ops(sirfsoc_smp_ops), .map_io = sirfsoc_map_io, - .init_time = sirfsoc_init_time, .init_late = sirfsoc_init_late, .dt_compat = marco_dt_match, .restart = sirfsoc_restart, diff --git a/arch/arm/mach-prima2/common.h b/arch/arm/mach-prima2/common.h index a630485..4b76806 100644 --- a/arch/arm/mach-prima2/common.h +++ b/arch/arm/mach-prima2/common.h @@ -23,7 +23,6 @@ extern void sirfsoc_secondary_startup(void); extern void sirfsoc_cpu_die(unsigned int cpu); extern void __init sirfsoc_of_irq_init(void); -extern void __init sirfsoc_of_clk_init(void); extern void sirfsoc_restart(enum reboot_mode, const char *); extern asmlinkage void __exception_irq_entry sirfsoc_handle_irq(struct pt_regs *regs); diff --git a/arch/arm/mach-rockchip/rockchip.c b/arch/arm/mach-rockchip/rockchip.c index 724d2d8..82c0b07 100644 --- a/arch/arm/mach-rockchip/rockchip.c +++ b/arch/arm/mach-rockchip/rockchip.c @@ -19,18 +19,10 @@ #include <linux/init.h> #include <linux/of_platform.h> #include <linux/irqchip.h> -#include <linux/dw_apb_timer.h> -#include <linux/clk-provider.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/hardware/cache-l2x0.h> -static void __init rockchip_timer_init(void) -{ - of_clk_init(NULL); - clocksource_of_init(); -} - static void __init rockchip_dt_init(void) { l2x0_of_init(0, ~0UL); @@ -47,6 +39,5 @@ static const char * const rockchip_board_dt_compat[] = { DT_MACHINE_START(ROCKCHIP_DT, "Rockchip Cortex-A9 (Device Tree)") .init_machine = rockchip_dt_init, - .init_time = rockchip_timer_init, .dt_compat = rockchip_board_dt_compat, MACHINE_END diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c index bfce964..dd0d49c 100644 --- a/arch/arm/mach-socfpga/socfpga.c +++ b/arch/arm/mach-socfpga/socfpga.c @@ -14,7 +14,6 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#include <linux/clk-provider.h> #include <linux/irqchip.h> #include <linux/of_address.h> #include <linux/of_irq.h> @@ -107,7 +106,6 @@ static void __init socfpga_cyclone5_init(void) { l2x0_of_init(0, ~0UL); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); - of_clk_init(NULL); socfpga_init_clocks(); } diff --git a/arch/arm/mach-sti/board-dt.c b/arch/arm/mach-sti/board-dt.c index 8fe6f0c..1217fb5 100644 --- a/arch/arm/mach-sti/board-dt.c +++ b/arch/arm/mach-sti/board-dt.c @@ -7,9 +7,8 @@ * published by the Free Software Foundation. */ -#include <linux/clk-provider.h> -#include <linux/clocksource.h> #include <linux/irq.h> +#include <linux/of_platform.h> #include <asm/hardware/cache-l2x0.h> #include <asm/mach/arch.h> @@ -28,11 +27,10 @@ void __init stih41x_l2x0_init(void) l2x0_of_init(aux_ctrl, L2X0_AUX_CTRL_MASK); } -static void __init stih41x_timer_init(void) +static void __init stih41x_machine_init(void) { - of_clk_init(NULL); - clocksource_of_init(); stih41x_l2x0_init(); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } static const char *stih41x_dt_match[] __initdata = { @@ -42,7 +40,7 @@ static const char *stih41x_dt_match[] __initdata = { }; DT_MACHINE_START(STM, "STiH415/416 SoC with Flattened Device Tree") - .init_time = stih41x_timer_init, + .init_machine = stih41x_machine_init, .smp = smp_ops(sti_smp_ops), .dt_compat = stih41x_dt_match, MACHINE_END diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c index e79fb34..90dda62 100644 --- a/arch/arm/mach-sunxi/sunxi.c +++ b/arch/arm/mach-sunxi/sunxi.c @@ -10,7 +10,6 @@ * warranty of any kind, whether express or implied. */ -#include <linux/clocksource.h> #include <linux/delay.h> #include <linux/kernel.h> #include <linux/init.h> @@ -20,8 +19,6 @@ #include <linux/io.h> #include <linux/reboot.h> -#include <linux/clk/sunxi.h> - #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/system_misc.h> @@ -116,12 +113,6 @@ static void sunxi_setup_restart(void) arm_pm_restart = of_id->data; } -static void __init sunxi_timer_init(void) -{ - sunxi_init_clocks(); - clocksource_of_init(); -} - static void __init sunxi_dt_init(void) { sunxi_setup_restart(); @@ -140,6 +131,5 @@ static const char * const sunxi_board_dt_compat[] = { DT_MACHINE_START(SUNXI_DT, "Allwinner A1X (Device Tree)") .init_machine = sunxi_dt_init, - .init_time = sunxi_timer_init, .dt_compat = sunxi_board_dt_compat, MACHINE_END diff --git a/arch/arm/mach-tegra/tegra.c b/arch/arm/mach-tegra/tegra.c index 80b801a..ce553d5 100644 --- a/arch/arm/mach-tegra/tegra.c +++ b/arch/arm/mach-tegra/tegra.c @@ -16,7 +16,6 @@ * */ -#include <linux/clocksource.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -33,7 +32,6 @@ #include <linux/slab.h> #include <linux/sys_soc.h> #include <linux/usb/tegra_usb_phy.h> -#include <linux/clk-provider.h> #include <linux/clk/tegra.h> #include <linux/irqchip.h> @@ -145,12 +143,6 @@ out: of_platform_populate(NULL, of_default_bus_match_table, NULL, parent); } -static void __init tegra_dt_init_time(void) -{ - of_clk_init(NULL); - clocksource_of_init(); -} - static void __init paz00_init(void) { if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC)) @@ -193,7 +185,6 @@ DT_MACHINE_START(TEGRA_DT, "NVIDIA Tegra SoC (Flattened Device Tree)") .smp = smp_ops(tegra_smp_ops), .init_early = tegra_init_early, .init_irq = tegra_dt_init_irq, - .init_time = tegra_dt_init_time, .init_machine = tegra_dt_init, .init_late = tegra_dt_init_late, .restart = tegra_pmc_restart, diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index 95a469e..4f8b8cb 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -1,12 +1,10 @@ /* * Versatile Express V2M Motherboard Support */ -#include <linux/clocksource.h> #include <linux/device.h> #include <linux/amba/bus.h> #include <linux/amba/mmci.h> #include <linux/io.h> -#include <linux/clocksource.h> #include <linux/smp.h> #include <linux/init.h> #include <linux/of_address.h> @@ -22,7 +20,6 @@ #include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> #include <linux/vexpress.h> -#include <linux/clk-provider.h> #include <linux/clkdev.h> #include <asm/mach-types.h> @@ -422,16 +419,8 @@ void __init v2m_dt_init_early(void) pr_warning("vexpress: DT HBI (%x) is not matching " "hardware (%x)!\n", dt_hbi, hbi); } -} - -static void __init v2m_dt_timer_init(void) -{ - of_clk_init(NULL); - clocksource_of_init(); - - versatile_sched_clock_init(vexpress_get_24mhz_clock_base(), - 24000000); + versatile_sched_clock_init(vexpress_get_24mhz_clock_base(), 24000000); } static const struct of_device_id v2m_dt_bus_match[] __initconst = { @@ -458,6 +447,5 @@ DT_MACHINE_START(VEXPRESS_DT, "ARM-Versatile Express") .smp_init = smp_init_ops(vexpress_smp_init_ops), .map_io = v2m_dt_map_io, .init_early = v2m_dt_init_early, - .init_time = v2m_dt_timer_init, .init_machine = v2m_dt_init, MACHINE_END diff --git a/arch/arm/mach-vt8500/common.h b/arch/arm/mach-vt8500/common.h deleted file mode 100644 index 087787a..0000000 --- a/arch/arm/mach-vt8500/common.h +++ /dev/null @@ -1,24 +0,0 @@ -/* linux/arch/arm/mach-vt8500/dt_common.h - * - * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __ARCH_ARM_MACH_VT8500_DT_COMMON_H -#define __ARCH_ARM_MACH_VT8500_DT_COMMON_H - -#include <linux/of.h> - -/* defined in drivers/clk/clk-vt8500.c */ -void __init vtwm_clk_init(void __iomem *pmc_base); - -#endif diff --git a/arch/arm/mach-vt8500/vt8500.c b/arch/arm/mach-vt8500/vt8500.c index eefaa60..4a73464 100644 --- a/arch/arm/mach-vt8500/vt8500.c +++ b/arch/arm/mach-vt8500/vt8500.c @@ -18,7 +18,6 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#include <linux/clocksource.h> #include <linux/io.h> #include <linux/pm.h> #include <linux/reboot.h> @@ -33,8 +32,6 @@ #include <linux/of_irq.h> #include <linux/of_platform.h> -#include "common.h" - #define LEGACY_GPIO_BASE 0xD8110000 #define LEGACY_PMC_BASE 0xD8130000 @@ -162,8 +159,6 @@ void __init vt8500_init(void) else pr_err("%s: PMC Hibernation register could not be remapped, not enabling power off!\n", __func__); - vtwm_clk_init(pmc_base); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } @@ -180,7 +175,6 @@ DT_MACHINE_START(WMT_DT, "VIA/Wondermedia SoC (Device Tree Support)") .dt_compat = vt8500_dt_compat, .map_io = vt8500_map_io, .init_machine = vt8500_init, - .init_time = clocksource_of_init, .restart = vt8500_restart, MACHINE_END diff --git a/drivers/clk/clk-bcm2835.c b/drivers/clk/clk-bcm2835.c index 5fb4ff5..6b950ca 100644 --- a/drivers/clk/clk-bcm2835.c +++ b/drivers/clk/clk-bcm2835.c @@ -20,14 +20,8 @@ #include <linux/clk-provider.h> #include <linux/clkdev.h> #include <linux/clk/bcm2835.h> -#include <linux/clk-provider.h> #include <linux/of.h> -static const struct of_device_id clk_match[] __initconst = { - { .compatible = "fixed-clock", .data = of_fixed_clk_setup, }, - { } -}; - /* * These are fixed clocks. They're probably not all root clocks and it may * be possible to turn them on and off but until this is mapped out better @@ -63,6 +57,4 @@ void __init bcm2835_init_clocks(void) ret = clk_register_clkdev(clk, NULL, "20215000.uart"); if (ret) pr_err("uart1_pclk alias not registered\n"); - - of_clk_init(clk_match); } diff --git a/drivers/clk/clk-highbank.c b/drivers/clk/clk-highbank.c index 2e08cb0..2e7e9d9 100644 --- a/drivers/clk/clk-highbank.c +++ b/drivers/clk/clk-highbank.c @@ -20,8 +20,7 @@ #include <linux/clk-provider.h> #include <linux/io.h> #include <linux/of.h> - -extern void __iomem *sregs_base; +#include <linux/of_address.h> #define HB_PLL_LOCK_500 0x20000000 #define HB_PLL_LOCK 0x10000000 @@ -280,6 +279,7 @@ static __init struct clk *hb_clk_init(struct device_node *node, const struct clk const char *clk_name = node->name; const char *parent_name; struct clk_init_data init; + struct device_node *srnp; int rc; rc = of_property_read_u32(node, "reg", ®); @@ -290,7 +290,11 @@ static __init struct clk *hb_clk_init(struct device_node *node, const struct clk if (WARN_ON(!hb_clk)) return NULL; - hb_clk->reg = sregs_base + reg; + /* Map system registers */ + srnp = of_find_compatible_node(NULL, NULL, "calxeda,hb-sregs"); + hb_clk->reg = of_iomap(srnp, 0); + BUG_ON(!hb_clk->reg); + hb_clk->reg += reg; of_property_read_string(node, "clock-output-names", &clk_name); diff --git a/drivers/clk/clk-nomadik.c b/drivers/clk/clk-nomadik.c index 51410c2..ce2d6b3 100644 --- a/drivers/clk/clk-nomadik.c +++ b/drivers/clk/clk-nomadik.c @@ -27,6 +27,14 @@ */ #define SRC_CR 0x00U +#define SRC_CR_T0_ENSEL BIT(15) +#define SRC_CR_T1_ENSEL BIT(17) +#define SRC_CR_T2_ENSEL BIT(19) +#define SRC_CR_T3_ENSEL BIT(21) +#define SRC_CR_T4_ENSEL BIT(23) +#define SRC_CR_T5_ENSEL BIT(25) +#define SRC_CR_T6_ENSEL BIT(27) +#define SRC_CR_T7_ENSEL BIT(29) #define SRC_XTALCR 0x0CU #define SRC_XTALCR_XTALTIMEN BIT(20) #define SRC_XTALCR_SXTALDIS BIT(19) @@ -54,6 +62,79 @@ static DEFINE_SPINLOCK(src_lock); /* Base address of the SRC */ static void __iomem *src_base; +static int nomadik_clk_reboot_handler(struct notifier_block *this, + unsigned long code, + void *unused) +{ + u32 val; + + /* The main chrystal need to be enabled for reboot to work */ + val = readl(src_base + SRC_XTALCR); + val &= ~SRC_XTALCR_MXTALOVER; + val |= SRC_XTALCR_MXTALEN; + pr_crit("force-enabling MXTALO\n"); + writel(val, src_base + SRC_XTALCR); + return NOTIFY_OK; +} + +static struct notifier_block nomadik_clk_reboot_notifier = { + .notifier_call = nomadik_clk_reboot_handler, +}; + +static const struct of_device_id nomadik_src_match[] __initconst = { + { .compatible = "stericsson,nomadik-src" }, + { /* sentinel */ } +}; + +static void nomadik_src_init(void) +{ + struct device_node *np; + u32 val; + + np = of_find_matching_node(NULL, nomadik_src_match); + if (!np) { + pr_crit("no matching node for SRC, aborting clock init\n"); + return; + } + src_base = of_iomap(np, 0); + if (!src_base) { + pr_err("%s: must have src parent node with REGS (%s)\n", + __func__, np->name); + return; + } + + /* Set all timers to use the 2.4 MHz TIMCLK */ + val = readl(src_base + SRC_CR); + val |= SRC_CR_T0_ENSEL; + val |= SRC_CR_T1_ENSEL; + val |= SRC_CR_T2_ENSEL; + val |= SRC_CR_T3_ENSEL; + val |= SRC_CR_T4_ENSEL; + val |= SRC_CR_T5_ENSEL; + val |= SRC_CR_T6_ENSEL; + val |= SRC_CR_T7_ENSEL; + writel(val, src_base + SRC_CR); + + val = readl(src_base + SRC_XTALCR); + pr_info("SXTALO is %s\n", + (val & SRC_XTALCR_SXTALDIS) ? "disabled" : "enabled"); + pr_info("MXTAL is %s\n", + (val & SRC_XTALCR_MXTALSTAT) ? "enabled" : "disabled"); + if (of_property_read_bool(np, "disable-sxtalo")) { + /* The machine uses an external oscillator circuit */ + val |= SRC_XTALCR_SXTALDIS; + pr_info("disabling SXTALO\n"); + } + if (of_property_read_bool(np, "disable-mxtalo")) { + /* Disable this too: also run by external oscillator */ + val |= SRC_XTALCR_MXTALOVER; + val &= ~SRC_XTALCR_MXTALEN; + pr_info("disabling MXTALO\n"); + } + writel(val, src_base + SRC_XTALCR); + register_reboot_notifier(&nomadik_clk_reboot_notifier); +} + /** * struct clk_pll1 - Nomadik PLL1 clock * @hw: corresponding clock hardware entry @@ -431,6 +512,9 @@ static void __init of_nomadik_pll_setup(struct device_node *np) const char *parent_name; u32 pll_id; + if (!src_base) + nomadik_src_init(); + if (of_property_read_u32(np, "pll-id", &pll_id)) { pr_err("%s: PLL \"%s\" missing pll-id property\n", __func__, clk_name); @@ -441,6 +525,8 @@ static void __init of_nomadik_pll_setup(struct device_node *np) if (!IS_ERR(clk)) of_clk_add_provider(np, of_clk_src_simple_get, clk); } +CLK_OF_DECLARE(nomadik_pll_clk, + "st,nomadik-pll-clock", of_nomadik_pll_setup); static void __init of_nomadik_hclk_setup(struct device_node *np) { @@ -448,6 +534,9 @@ static void __init of_nomadik_hclk_setup(struct device_node *np) const char *clk_name = np->name; const char *parent_name; + if (!src_base) + nomadik_src_init(); + parent_name = of_clk_get_parent_name(np, 0); /* * The HCLK divides PLL1 with 1 (passthru), 2, 3 or 4. @@ -460,6 +549,8 @@ static void __init of_nomadik_hclk_setup(struct device_node *np) if (!IS_ERR(clk)) of_clk_add_provider(np, of_clk_src_simple_get, clk); } +CLK_OF_DECLARE(nomadik_hclk_clk, + "st,nomadik-hclk-clock", of_nomadik_hclk_setup); static void __init of_nomadik_src_clk_setup(struct device_node *np) { @@ -468,6 +559,9 @@ static void __init of_nomadik_src_clk_setup(struct device_node *np) const char *parent_name; u32 clk_id; + if (!src_base) + nomadik_src_init(); + if (of_property_read_u32(np, "clock-id", &clk_id)) { pr_err("%s: SRC clock \"%s\" missing clock-id property\n", __func__, clk_name); @@ -478,89 +572,5 @@ static void __init of_nomadik_src_clk_setup(struct device_node *np) if (!IS_ERR(clk)) of_clk_add_provider(np, of_clk_src_simple_get, clk); } - -static const struct of_device_id nomadik_src_match[] __initconst = { - { .compatible = "stericsson,nomadik-src" }, - { /* sentinel */ } -}; - -static const struct of_device_id nomadik_src_clk_match[] __initconst = { - { - .compatible = "fixed-clock", - .data = of_fixed_clk_setup, - }, - { - .compatible = "fixed-factor-clock", - .data = of_fixed_factor_clk_setup, - }, - { - .compatible = "st,nomadik-pll-clock", - .data = of_nomadik_pll_setup, - }, - { - .compatible = "st,nomadik-hclk-clock", - .data = of_nomadik_hclk_setup, - }, - { - .compatible = "st,nomadik-src-clock", - .data = of_nomadik_src_clk_setup, - }, - { /* sentinel */ } -}; - -static int nomadik_clk_reboot_handler(struct notifier_block *this, - unsigned long code, - void *unused) -{ - u32 val; - - /* The main chrystal need to be enabled for reboot to work */ - val = readl(src_base + SRC_XTALCR); - val &= ~SRC_XTALCR_MXTALOVER; - val |= SRC_XTALCR_MXTALEN; - pr_crit("force-enabling MXTALO\n"); - writel(val, src_base + SRC_XTALCR); - return NOTIFY_OK; -} - -static struct notifier_block nomadik_clk_reboot_notifier = { - .notifier_call = nomadik_clk_reboot_handler, -}; - -void __init nomadik_clk_init(void) -{ - struct device_node *np; - u32 val; - - np = of_find_matching_node(NULL, nomadik_src_match); - if (!np) { - pr_crit("no matching node for SRC, aborting clock init\n"); - return; - } - src_base = of_iomap(np, 0); - if (!src_base) { - pr_err("%s: must have src parent node with REGS (%s)\n", - __func__, np->name); - return; - } - val = readl(src_base + SRC_XTALCR); - pr_info("SXTALO is %s\n", - (val & SRC_XTALCR_SXTALDIS) ? "disabled" : "enabled"); - pr_info("MXTAL is %s\n", - (val & SRC_XTALCR_MXTALSTAT) ? "enabled" : "disabled"); - if (of_property_read_bool(np, "disable-sxtalo")) { - /* The machine uses an external oscillator circuit */ - val |= SRC_XTALCR_SXTALDIS; - pr_info("disabling SXTALO\n"); - } - if (of_property_read_bool(np, "disable-mxtalo")) { - /* Disable this too: also run by external oscillator */ - val |= SRC_XTALCR_MXTALOVER; - val &= ~SRC_XTALCR_MXTALEN; - pr_info("disabling MXTALO\n"); - } - writel(val, src_base + SRC_XTALCR); - register_reboot_notifier(&nomadik_clk_reboot_notifier); - - of_clk_init(nomadik_src_clk_match); -} +CLK_OF_DECLARE(nomadik_src_clk, + "st,nomadik-src-clock", of_nomadik_src_clk_setup); diff --git a/drivers/clk/clk-prima2.c b/drivers/clk/clk-prima2.c index 5ab95f1..6c15e33 100644 --- a/drivers/clk/clk-prima2.c +++ b/drivers/clk/clk-prima2.c @@ -1015,16 +1015,6 @@ static struct clk_std clk_usb1 = { }, }; -static struct of_device_id clkc_ids[] = { - { .compatible = "sirf,prima2-clkc" }, - {}, -}; - -static struct of_device_id rsc_ids[] = { - { .compatible = "sirf,prima2-rsc" }, - {}, -}; - enum prima2_clk_index { /* 0 1 2 3 4 5 6 7 8 9 */ rtc, osc, pll1, pll2, pll3, mem, sys, security, dsp, gps, @@ -1082,24 +1072,16 @@ static struct clk_hw *prima2_clk_hw_array[maxclk] __initdata = { static struct clk *prima2_clks[maxclk]; static struct clk_onecell_data clk_data; -void __init sirfsoc_of_clk_init(void) +static void __init sirfsoc_clk_init(struct device_node *np) { - struct device_node *np; + struct device_node *rscnp; int i; - np = of_find_matching_node(NULL, rsc_ids); - if (!np) - panic("unable to find compatible rsc node in dtb\n"); - - sirfsoc_rsc_vbase = of_iomap(np, 0); + rscnp = of_find_compatible_node(NULL, NULL, "sirf,prima2-rsc"); + sirfsoc_rsc_vbase = of_iomap(rscnp, 0); if (!sirfsoc_rsc_vbase) panic("unable to map rsc registers\n"); - - of_node_put(np); - - np = of_find_matching_node(NULL, clkc_ids); - if (!np) - return; + of_node_put(rscnp); sirfsoc_clk_vbase = of_iomap(np, 0); if (!sirfsoc_clk_vbase) @@ -1124,3 +1106,4 @@ void __init sirfsoc_of_clk_init(void) of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); } +CLK_OF_DECLARE(sirfsoc_clk, "sirf,prima2-clkc", sirfsoc_clk_init); diff --git a/drivers/clk/clk-vt8500.c b/drivers/clk/clk-vt8500.c index 82306f5..7fd5c5e 100644 --- a/drivers/clk/clk-vt8500.c +++ b/drivers/clk/clk-vt8500.c @@ -15,11 +15,14 @@ #include <linux/io.h> #include <linux/of.h> +#include <linux/of_address.h> #include <linux/slab.h> #include <linux/bitops.h> #include <linux/clkdev.h> #include <linux/clk-provider.h> +#define LEGACY_PMC_BASE 0xD8130000 + /* All clocks share the same lock as none can be changed concurrently */ static DEFINE_SPINLOCK(_lock); @@ -53,6 +56,21 @@ struct clk_pll { static void __iomem *pmc_base; +static __init void vtwm_set_pmc_base(void) +{ + struct device_node *np = + of_find_compatible_node(NULL, NULL, "via,vt8500-pmc"); + + if (np) + pmc_base = of_iomap(np, 0); + else + pmc_base = ioremap(LEGACY_PMC_BASE, 0x1000); + of_node_put(np); + + if (!pmc_base) + pr_err("%s:of_iomap(pmc) failed\n", __func__); +} + #define to_clk_device(_hw) container_of(_hw, struct clk_device, hw) #define VT8500_PMC_BUSY_MASK 0x18 @@ -222,6 +240,9 @@ static __init void vtwm_device_clk_init(struct device_node *node) int rc; int clk_init_flags = 0; + if (!pmc_base) + vtwm_set_pmc_base(); + dev_clk = kzalloc(sizeof(*dev_clk), GFP_KERNEL); if (WARN_ON(!dev_clk)) return; @@ -636,6 +657,9 @@ static __init void vtwm_pll_clk_init(struct device_node *node, int pll_type) struct clk_init_data init; int rc; + if (!pmc_base) + vtwm_set_pmc_base(); + rc = of_property_read_u32(node, "reg", ®); if (WARN_ON(rc)) return; @@ -694,13 +718,3 @@ static void __init wm8850_pll_init(struct device_node *node) vtwm_pll_clk_init(node, PLL_TYPE_WM8850); } CLK_OF_DECLARE(wm8850_pll, "wm,wm8850-pll-clock", wm8850_pll_init); - -void __init vtwm_clk_init(void __iomem *base) -{ - if (!base) - return; - - pmc_base = base; - - of_clk_init(NULL); -} diff --git a/drivers/clk/mxs/clk-imx23.c b/drivers/clk/mxs/clk-imx23.c index c396fe3..9fc9359 100644 --- a/drivers/clk/mxs/clk-imx23.c +++ b/drivers/clk/mxs/clk-imx23.c @@ -12,6 +12,7 @@ #include <linux/clk.h> #include <linux/clk/mxs.h> #include <linux/clkdev.h> +#include <linux/clk-provider.h> #include <linux/err.h> #include <linux/init.h> #include <linux/io.h> @@ -100,16 +101,16 @@ static enum imx23_clk clks_init_on[] __initdata = { cpu, hbus, xbus, emi, uart, }; -int __init mx23_clocks_init(void) +static void __init mx23_clocks_init(struct device_node *np) { - struct device_node *np; + struct device_node *dcnp; u32 i; - np = of_find_compatible_node(NULL, NULL, "fsl,imx23-digctl"); - digctrl = of_iomap(np, 0); + dcnp = of_find_compatible_node(NULL, NULL, "fsl,imx23-digctl"); + digctrl = of_iomap(dcnp, 0); WARN_ON(!digctrl); + of_node_put(dcnp); - np = of_find_compatible_node(NULL, NULL, "fsl,imx23-clkctrl"); clkctrl = of_iomap(np, 0); WARN_ON(!clkctrl); @@ -162,7 +163,7 @@ int __init mx23_clocks_init(void) if (IS_ERR(clks[i])) { pr_err("i.MX23 clk %d: register failed with %ld\n", i, PTR_ERR(clks[i])); - return PTR_ERR(clks[i]); + return; } clk_data.clks = clks; @@ -172,5 +173,5 @@ int __init mx23_clocks_init(void) for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) clk_prepare_enable(clks[clks_init_on[i]]); - return 0; } +CLK_OF_DECLARE(imx23_clkctrl, "fsl,imx23-clkctrl", mx23_clocks_init); diff --git a/drivers/clk/mxs/clk-imx28.c b/drivers/clk/mxs/clk-imx28.c index 4faf0af..a6c3501 100644 --- a/drivers/clk/mxs/clk-imx28.c +++ b/drivers/clk/mxs/clk-imx28.c @@ -12,6 +12,7 @@ #include <linux/clk.h> #include <linux/clk/mxs.h> #include <linux/clkdev.h> +#include <linux/clk-provider.h> #include <linux/err.h> #include <linux/init.h> #include <linux/io.h> @@ -154,16 +155,16 @@ static enum imx28_clk clks_init_on[] __initdata = { cpu, hbus, xbus, emi, uart, }; -int __init mx28_clocks_init(void) +static void __init mx28_clocks_init(struct device_node *np) { - struct device_node *np; + struct device_node *dcnp; u32 i; - np = of_find_compatible_node(NULL, NULL, "fsl,imx28-digctl"); - digctrl = of_iomap(np, 0); + dcnp = of_find_compatible_node(NULL, NULL, "fsl,imx28-digctl"); + digctrl = of_iomap(dcnp, 0); WARN_ON(!digctrl); + of_node_put(dcnp); - np = of_find_compatible_node(NULL, NULL, "fsl,imx28-clkctrl"); clkctrl = of_iomap(np, 0); WARN_ON(!clkctrl); @@ -239,7 +240,7 @@ int __init mx28_clocks_init(void) if (IS_ERR(clks[i])) { pr_err("i.MX28 clk %d: register failed with %ld\n", i, PTR_ERR(clks[i])); - return PTR_ERR(clks[i]); + return; } clk_data.clks = clks; @@ -250,6 +251,5 @@ int __init mx28_clocks_init(void) for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) clk_prepare_enable(clks[clks_init_on[i]]); - - return 0; } +CLK_OF_DECLARE(imx28_clkctrl, "fsl,imx28-clkctrl", mx28_clocks_init); diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c index 34ee69f..9bbd035 100644 --- a/drivers/clk/sunxi/clk-sunxi.c +++ b/drivers/clk/sunxi/clk-sunxi.c @@ -16,7 +16,6 @@ #include <linux/clk-provider.h> #include <linux/clkdev.h> -#include <linux/clk/sunxi.h> #include <linux/of.h> #include <linux/of_address.h> @@ -617,11 +616,8 @@ static void __init of_sunxi_table_clock_setup(const struct of_device_id *clk_mat } } -void __init sunxi_init_clocks(void) +static void __init sunxi_init_clocks(struct device_node *np) { - /* Register all the simple and basic clocks on DT */ - of_clk_init(NULL); - /* Register factor clocks */ of_sunxi_table_clock_setup(clk_factors_match, sunxi_factors_clk_setup); @@ -634,3 +630,8 @@ void __init sunxi_init_clocks(void) /* Register gate clocks */ of_sunxi_table_clock_setup(clk_gates_match, sunxi_gates_clk_setup); } +CLK_OF_DECLARE(sun4i_a10_clk_init, "allwinner,sun4i-a10", sunxi_init_clocks); +CLK_OF_DECLARE(sun5i_a10s_clk_init, "allwinner,sun5i-a10s", sunxi_init_clocks); +CLK_OF_DECLARE(sun5i_a13_clk_init, "allwinner,sun5i-a13", sunxi_init_clocks); +CLK_OF_DECLARE(sun6i_a31_clk_init, "allwinner,sun6i-a31", sunxi_init_clocks); +CLK_OF_DECLARE(sun7i_a20_clk_init, "allwinner,sun7i-a20", sunxi_init_clocks); diff --git a/include/linux/clk/mxs.h b/include/linux/clk/mxs.h index 90c30dc..5138a90 100644 --- a/include/linux/clk/mxs.h +++ b/include/linux/clk/mxs.h @@ -9,8 +9,6 @@ #ifndef __LINUX_CLK_MXS_H #define __LINUX_CLK_MXS_H -int mx23_clocks_init(void); -int mx28_clocks_init(void); int mxs_saif_clkmux_select(unsigned int clkmux); #endif diff --git a/include/linux/clk/sunxi.h b/include/linux/clk/sunxi.h deleted file mode 100644 index e074fdd..0000000 --- a/include/linux/clk/sunxi.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Copyright 2012 Maxime Ripard - * - * Maxime Ripard <maxime.ripard@free-electrons.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __LINUX_CLK_SUNXI_H_ -#define __LINUX_CLK_SUNXI_H_ - -void __init sunxi_init_clocks(void); - -#endif diff --git a/include/linux/platform_data/clk-nomadik.h b/include/linux/platform_data/clk-nomadik.h deleted file mode 100644 index 5713c87..0000000 --- a/include/linux/platform_data/clk-nomadik.h +++ /dev/null @@ -1,2 +0,0 @@ -/* Minimal platform data header */ -void nomadik_clk_init(void); |
