diff options
270 files changed, 14349 insertions, 3745 deletions
diff --git a/Documentation/arm/sunxi/clocks.txt b/Documentation/arm/sunxi/clocks.txt new file mode 100644 index 0000000..e09a88a --- /dev/null +++ b/Documentation/arm/sunxi/clocks.txt @@ -0,0 +1,56 @@ +Frequently asked questions about the sunxi clock system +======================================================= + +This document contains useful bits of information that people tend to ask +about the sunxi clock system, as well as accompanying ASCII art when adequate. + +Q: Why is the main 24MHz oscillator gatable? Wouldn't that break the + system? + +A: The 24MHz oscillator allows gating to save power. Indeed, if gated + carelessly the system would stop functioning, but with the right + steps, one can gate it and keep the system running. Consider this + simplified suspend example: + + While the system is operational, you would see something like + + 24MHz 32kHz + | + PLL1 + \ + \_ CPU Mux + | + [CPU] + + When you are about to suspend, you switch the CPU Mux to the 32kHz + oscillator: + + 24Mhz 32kHz + | | + PLL1 | + / + CPU Mux _/ + | + [CPU] + + Finally you can gate the main oscillator + + 32kHz + | + | + / + CPU Mux _/ + | + [CPU] + +Q: Were can I learn more about the sunxi clocks? + +A: The linux-sunxi wiki contains a page documenting the clock registers, + you can find it at + + http://linux-sunxi.org/A10/CCM + + The authoritative source for information at this time is the ccmu driver + released by Allwinner, you can find it at + + https://github.com/linux-sunxi/linux-sunxi/tree/sunxi-3.0/arch/arm/mach-sun4i/clock/ccmu diff --git a/Documentation/clk.txt b/Documentation/clk.txt index 1943fae..4274a54 100644 --- a/Documentation/clk.txt +++ b/Documentation/clk.txt @@ -174,9 +174,9 @@ int clk_foo_enable(struct clk_hw *hw) }; Below is a matrix detailing which clk_ops are mandatory based upon the -hardware capbilities of that clock. A cell marked as "y" means +hardware capabilities of that clock. A cell marked as "y" means mandatory, a cell marked as "n" implies that either including that -callback is invalid or otherwise uneccesary. Empty cells are either +callback is invalid or otherwise unnecessary. Empty cells are either optional or must be evaluated on a case-by-case basis. clock hardware characteristics diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt index b5846e2..1608a54 100644 --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt @@ -1,19 +1,84 @@ NVIDIA Tegra Power Management Controller (PMC) -Properties: +The PMC block interacts with an external Power Management Unit. The PMC +mostly controls the entry and exit of the system from different sleep +modes. It provides power-gating controllers for SoC and CPU power-islands. + +Required properties: - name : Should be pmc - compatible : Should contain "nvidia,tegra<chip>-pmc". - reg : Offset and length of the register set for the device +- clocks : Must contain an entry for each entry in clock-names. +- clock-names : Must include the following entries: + "pclk" (The Tegra clock of that name), + "clk32k_in" (The 32KHz clock input to Tegra). + +Optional properties: - nvidia,invert-interrupt : If present, inverts the PMU interrupt signal. The PMU is an external Power Management Unit, whose interrupt output signal is fed into the PMC. This signal is optionally inverted, and then fed into the ARM GIC. The PMC is not involved in the detection or handling of this interrupt signal, merely its inversion. +- nvidia,suspend-mode : The suspend mode that the platform should use. + Valid values are 0, 1 and 2: + 0 (LP0): CPU + Core voltage off and DRAM in self-refresh + 1 (LP1): CPU voltage off and DRAM in self-refresh + 2 (LP2): CPU voltage off +- nvidia,core-power-req-active-high : Boolean, core power request active-high +- nvidia,sys-clock-req-active-high : Boolean, system clock request active-high +- nvidia,combined-power-req : Boolean, combined power request for CPU & Core +- nvidia,cpu-pwr-good-en : Boolean, CPU power good signal (from PMIC to PMC) + is enabled. + +Required properties when nvidia,suspend-mode is specified: +- nvidia,cpu-pwr-good-time : CPU power good time in uS. +- nvidia,cpu-pwr-off-time : CPU power off time in uS. +- nvidia,core-pwr-good-time : <Oscillator-stable-time Power-stable-time> + Core power good time in uS. +- nvidia,core-pwr-off-time : Core power off time in uS. + +Required properties when nvidia,suspend-mode=<0>: +- nvidia,lp0-vec : <start length> Starting address and length of LP0 vector + The LP0 vector contains the warm boot code that is executed by AVP when + resuming from the LP0 state. The AVP (Audio-Video Processor) is an ARM7 + processor and always being the first boot processor when chip is power on + or resume from deep sleep mode. When the system is resumed from the deep + sleep mode, the warm boot code will restore some PLLs, clocks and then + bring up CPU0 for resuming the system. Example: +/ SoC dts including file pmc@7000f400 { compatible = "nvidia,tegra20-pmc"; reg = <0x7000e400 0x400>; + clocks = <&tegra_car 110>, <&clk32k_in>; + clock-names = "pclk", "clk32k_in"; nvidia,invert-interrupt; + nvidia,suspend-mode = <1>; + nvidia,cpu-pwr-good-time = <2000>; + nvidia,cpu-pwr-off-time = <100>; + nvidia,core-pwr-good-time = <3845 3845>; + nvidia,core-pwr-off-time = <458>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; + nvidia,lp0-vec = <0xbdffd000 0x2000>; +}; + +/ Tegra board dts file +{ + ... + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + ... }; diff --git a/Documentation/devicetree/bindings/bus/ti-gpmc.txt b/Documentation/devicetree/bindings/bus/ti-gpmc.txt index 5ddb2e9..4b87ea1 100644 --- a/Documentation/devicetree/bindings/bus/ti-gpmc.txt +++ b/Documentation/devicetree/bindings/bus/ti-gpmc.txt @@ -35,36 +35,83 @@ Required properties: Timing properties for child nodes. All are optional and default to 0. - - gpmc,sync-clk: Minimum clock period for synchronous mode, in picoseconds - - Chip-select signal timings corresponding to GPMC_CONFIG2: - - gpmc,cs-on: Assertion time - - gpmc,cs-rd-off: Read deassertion time - - gpmc,cs-wr-off: Write deassertion time - - ADV signal timings corresponding to GPMC_CONFIG3: - - gpmc,adv-on: Assertion time - - gpmc,adv-rd-off: Read deassertion time - - gpmc,adv-wr-off: Write deassertion time - - WE signals timings corresponding to GPMC_CONFIG4: - - gpmc,we-on: Assertion time - - gpmc,we-off: Deassertion time - - OE signals timings corresponding to GPMC_CONFIG4: - - gpmc,oe-on: Assertion time - - gpmc,oe-off: Deassertion time - - Access time and cycle time timings corresponding to GPMC_CONFIG5: - - gpmc,page-burst-access: Multiple access word delay - - gpmc,access: Start-cycle to first data valid delay - - gpmc,rd-cycle: Total read cycle time - - gpmc,wr-cycle: Total write cycle time + - gpmc,sync-clk-ps: Minimum clock period for synchronous mode, in picoseconds + + Chip-select signal timings (in nanoseconds) corresponding to GPMC_CONFIG2: + - gpmc,cs-on-ns: Assertion time + - gpmc,cs-rd-off-ns: Read deassertion time + - gpmc,cs-wr-off-ns: Write deassertion time + + ADV signal timings (in nanoseconds) corresponding to GPMC_CONFIG3: + - gpmc,adv-on-ns: Assertion time + - gpmc,adv-rd-off-ns: Read deassertion time + - gpmc,adv-wr-off-ns: Write deassertion time + + WE signals timings (in nanoseconds) corresponding to GPMC_CONFIG4: + - gpmc,we-on-ns Assertion time + - gpmc,we-off-ns: Deassertion time + + OE signals timings (in nanoseconds) corresponding to GPMC_CONFIG4: + - gpmc,oe-on-ns: Assertion time + - gpmc,oe-off-ns: Deassertion time + + Access time and cycle time timings (in nanoseconds) corresponding to + GPMC_CONFIG5: + - gpmc,page-burst-access-ns: Multiple access word delay + - gpmc,access-ns: Start-cycle to first data valid delay + - gpmc,rd-cycle-ns: Total read cycle time + - gpmc,wr-cycle-ns: Total write cycle time + - gpmc,bus-turnaround-ns: Turn-around time between successive accesses + - gpmc,cycle2cycle-delay-ns: Delay between chip-select pulses + - gpmc,clk-activation-ns: GPMC clock activation time + - gpmc,wait-monitoring-ns: Start of wait monitoring with regard to valid + data + +Boolean timing parameters. If property is present parameter enabled and +disabled if omitted: + - gpmc,adv-extra-delay: ADV signal is delayed by half GPMC clock + - gpmc,cs-extra-delay: CS signal is delayed by half GPMC clock + - gpmc,cycle2cycle-diffcsen: Add "cycle2cycle-delay" between successive + accesses to a different CS + - gpmc,cycle2cycle-samecsen: Add "cycle2cycle-delay" between successive + accesses to the same CS + - gpmc,oe-extra-delay: OE signal is delayed by half GPMC clock + - gpmc,we-extra-delay: WE signal is delayed by half GPMC clock + - gpmc,time-para-granularity: Multiply all access times by 2 The following are only applicable to OMAP3+ and AM335x: - - gpmc,wr-access - - gpmc,wr-data-mux-bus - + - gpmc,wr-access-ns: In synchronous write mode, for single or + burst accesses, defines the number of + GPMC_FCLK cycles from start access time + to the GPMC_CLK rising edge used by the + memory device for the first data capture. + - gpmc,wr-data-mux-bus-ns: In address-data multiplex mode, specifies + the time when the first data is driven on + the address-data bus. + +GPMC chip-select settings properties for child nodes. All are optional. + +- gpmc,burst-length Page/burst length. Must be 4, 8 or 16. +- gpmc,burst-wrap Enables wrap bursting +- gpmc,burst-read Enables read page/burst mode +- gpmc,burst-write Enables write page/burst mode +- gpmc,device-nand Device is NAND +- gpmc,device-width Total width of device(s) connected to a GPMC + chip-select in bytes. The GPMC supports 8-bit + and 16-bit devices and so this property must be + 1 or 2. +- gpmc,mux-add-data Address and data multiplexing configuration. + Valid values are 1 for address-address-data + multiplexing mode and 2 for address-data + multiplexing mode. +- gpmc,sync-read Enables synchronous read. Defaults to asynchronous + is this is not set. +- gpmc,sync-write Enables synchronous writes. Defaults to asynchronous + is this is not set. +- gpmc,wait-pin Wait-pin used by client. Must be less than + "gpmc,num-waitpins". +- gpmc,wait-on-read Enables wait monitoring on reads. +- gpmc,wait-on-write Enables wait monitoring on writes. Example for an AM33xx board: diff --git a/Documentation/devicetree/bindings/clock/axi-clkgen.txt b/Documentation/devicetree/bindings/clock/axi-clkgen.txt new file mode 100644 index 0000000..028b493 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/axi-clkgen.txt @@ -0,0 +1,22 @@ +Binding for the axi-clkgen clock generator + +This binding uses the common clock binding[1]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible : shall be "adi,axi-clkgen". +- #clock-cells : from common clock binding; Should always be set to 0. +- reg : Address and length of the axi-clkgen register set. +- clocks : Phandle and clock specifier for the parent clock. + +Optional properties: +- clock-output-names : From common clock binding. + +Example: + clock@0xff000000 { + compatible = "adi,axi-clkgen"; + #clock-cells = <0>; + reg = <0xff000000 0x1000>; + clocks = <&osc 1>; + }; diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt new file mode 100644 index 0000000..d6cb083 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt @@ -0,0 +1,303 @@ +NVIDIA Tegra114 Clock And Reset Controller + +This binding uses the common clock binding: +Documentation/devicetree/bindings/clock/clock-bindings.txt + +The CAR (Clock And Reset) Controller on Tegra is the HW module responsible +for muxing and gating Tegra's clocks, and setting their rates. + +Required properties : +- compatible : Should be "nvidia,tegra114-car" +- reg : Should contain CAR registers location and length +- clocks : Should contain phandle and clock specifiers for two clocks: + the 32 KHz "32k_in", and the board-specific oscillator "osc". +- #clock-cells : Should be 1. + In clock consumers, this cell represents the clock ID exposed by the CAR. + + The first 160 clocks are numbered to match the bits in the CAR's CLK_OUT_ENB + registers. These IDs often match those in the CAR's RST_DEVICES registers, + but not in all cases. Some bits in CLK_OUT_ENB affect multiple clocks. In + this case, those clocks are assigned IDs above 160 in order to highlight + this issue. Implementations that interpret these clock IDs as bit values + within the CLK_OUT_ENB or RST_DEVICES registers should be careful to + explicitly handle these special cases. + + The balance of the clocks controlled by the CAR are assigned IDs of 160 and + above. + + 0 unassigned + 1 unassigned + 2 unassigned + 3 unassigned + 4 rtc + 5 timer + 6 uarta + 7 unassigned (register bit affects uartb and vfir) + 8 unassigned + 9 sdmmc2 + 10 unassigned (register bit affects spdif_in and spdif_out) + 11 i2s1 + 12 i2c1 + 13 ndflash + 14 sdmmc1 + 15 sdmmc4 + 16 unassigned + 17 pwm + 18 i2s2 + 19 epp + 20 unassigned (register bit affects vi and vi_sensor) + 21 2d + 22 usbd + 23 isp + 24 3d + 25 unassigned + 26 disp2 + 27 disp1 + 28 host1x + 29 vcp + 30 i2s0 + 31 unassigned + + 32 unassigned + 33 unassigned + 34 apbdma + 35 unassigned + 36 kbc + 37 unassigned + 38 unassigned + 39 unassigned (register bit affects fuse and fuse_burn) + 40 kfuse + 41 sbc1 + 42 nor + 43 unassigned + 44 sbc2 + 45 unassigned + 46 sbc3 + 47 i2c5 + 48 dsia + 49 unassigned + 50 mipi + 51 hdmi + 52 csi + 53 unassigned + 54 i2c2 + 55 uartc + 56 mipi-cal + 57 emc + 58 usb2 + 59 usb3 + 60 msenc + 61 vde + 62 bsea + 63 bsev + + 64 unassigned + 65 uartd + 66 unassigned + 67 i2c3 + 68 sbc4 + 69 sdmmc3 + 70 unassigned + 71 owr + 72 afi + 73 csite + 74 unassigned + 75 unassigned + 76 la + 77 trace + 78 soc_therm + 79 dtv + 80 ndspeed + 81 i2cslow + 82 dsib + 83 tsec + 84 unassigned + 85 unassigned + 86 unassigned + 87 unassigned + 88 unassigned + 89 xusb_host + 90 unassigned + 91 msenc + 92 csus + 93 unassigned + 94 unassigned + 95 unassigned (bit affects xusb_dev and xusb_dev_src) + + 96 unassigned + 97 unassigned + 98 unassigned + 99 mselect + 100 tsensor + 101 i2s3 + 102 i2s4 + 103 i2c4 + 104 sbc5 + 105 sbc6 + 106 d_audio + 107 apbif + 108 dam0 + 109 dam1 + 110 dam2 + 111 hda2codec_2x + 112 unassigned + 113 audio0_2x + 114 audio1_2x + 115 audio2_2x + 116 audio3_2x + 117 audio4_2x + 118 spdif_2x + 119 actmon + 120 extern1 + 121 extern2 + 122 extern3 + 123 unassigned + 124 unassigned + 125 hda + 126 unassigned + 127 se + + 128 hda2hdmi + 129 unassigned + 130 unassigned + 131 unassigned + 132 unassigned + 133 unassigned + 134 unassigned + 135 unassigned + 136 unassigned + 137 unassigned + 138 unassigned + 139 unassigned + 140 unassigned + 141 unassigned + 142 unassigned + 143 unassigned (bit affects xusb_falcon_src, xusb_fs_src, + xusb_host_src and xusb_ss_src) + 144 cilab + 145 cilcd + 146 cile + 147 dsialp + 148 dsiblp + 149 unassigned + 150 dds + 151 unassigned + 152 dp2 + 153 amx + 154 adx + 155 unassigned (bit affects dfll_ref and dfll_soc) + 156 xusb_ss + + 192 uartb + 193 vfir + 194 spdif_in + 195 spdif_out + 196 vi + 197 vi_sensor + 198 fuse + 199 fuse_burn + 200 clk_32k + 201 clk_m + 202 clk_m_div2 + 203 clk_m_div4 + 204 pll_ref + 205 pll_c + 206 pll_c_out1 + 207 pll_c2 + 208 pll_c3 + 209 pll_m + 210 pll_m_out1 + 211 pll_p + 212 pll_p_out1 + 213 pll_p_out2 + 214 pll_p_out3 + 215 pll_p_out4 + 216 pll_a + 217 pll_a_out0 + 218 pll_d + 219 pll_d_out0 + 220 pll_d2 + 221 pll_d2_out0 + 222 pll_u + 223 pll_u_480M + 224 pll_u_60M + 225 pll_u_48M + 226 pll_u_12M + 227 pll_x + 228 pll_x_out0 + 229 pll_re_vco + 230 pll_re_out + 231 pll_e_out0 + 232 spdif_in_sync + 233 i2s0_sync + 234 i2s1_sync + 235 i2s2_sync + 236 i2s3_sync + 237 i2s4_sync + 238 vimclk_sync + 239 audio0 + 240 audio1 + 241 audio2 + 242 audio3 + 243 audio4 + 244 spdif + 245 clk_out_1 + 246 clk_out_2 + 247 clk_out_3 + 248 blink + 252 xusb_host_src + 253 xusb_falcon_src + 254 xusb_fs_src + 255 xusb_ss_src + 256 xusb_dev_src + 257 xusb_dev + 258 xusb_hs_src + 259 sclk + 260 hclk + 261 pclk + 262 cclk_g + 263 cclk_lp + 264 dfll_ref + 265 dfll_soc + +Example SoC include file: + +/ { + tegra_car: clock { + compatible = "nvidia,tegra114-car"; + reg = <0x60006000 0x1000>; + #clock-cells = <1>; + }; + + usb@c5004000 { + clocks = <&tegra_car 58>; /* usb2 */ + }; +}; + +Example board file: + +/ { + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + osc: clock@0 { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; + clock-frequency = <12000000>; + }; + + clk_32k: clock@1 { + compatible = "fixed-clock"; + reg = <1>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + &tegra_car { + clocks = <&clk_32k> <&osc>; + }; +}; diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt index 0921fac..e885680 100644 --- a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt +++ b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt @@ -120,8 +120,8 @@ Required properties : 90 clk_d 91 unassigned 92 sus - 93 cdev1 - 94 cdev2 + 93 cdev2 + 94 cdev1 95 unassigned 96 uart2 diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt new file mode 100644 index 0000000..20b8479 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/sunxi.txt @@ -0,0 +1,44 @@ +Device Tree Clock bindings for arch-sunxi + +This binding uses the common clock binding[1]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible : shall be one of the following: + "allwinner,sun4i-osc-clk" - for a gatable oscillator + "allwinner,sun4i-pll1-clk" - for the main PLL clock + "allwinner,sun4i-cpu-clk" - for the CPU multiplexer clock + "allwinner,sun4i-axi-clk" - for the AXI clock + "allwinner,sun4i-ahb-clk" - for the AHB clock + "allwinner,sun4i-apb0-clk" - for the APB0 clock + "allwinner,sun4i-apb1-clk" - for the APB1 clock + "allwinner,sun4i-apb1-mux-clk" - for the APB1 clock muxing + +Required properties for all clocks: +- reg : shall be the control register address for the clock. +- clocks : shall be the input parent clock(s) phandle for the clock +- #clock-cells : from common clock binding; shall be set to 0. + +For example: + +osc24M: osc24M@01c20050 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-osc-clk"; + reg = <0x01c20050 0x4>; + clocks = <&osc24M_fixed>; +}; + +pll1: pll1@01c20000 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-pll1-clk"; + reg = <0x01c20000 0x4>; + clocks = <&osc24M>; +}; + +cpu: cpu@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-cpu-clk"; + reg = <0x01c20054 0x4>; + clocks = <&osc32k>, <&osc24M>, <&pll1>; +}; diff --git a/Documentation/devicetree/bindings/gpio/gpio-vt8500.txt b/Documentation/devicetree/bindings/gpio/gpio-vt8500.txt deleted file mode 100644 index f4dc523..0000000 --- a/Documentation/devicetree/bindings/gpio/gpio-vt8500.txt +++ /dev/null @@ -1,24 +0,0 @@ -VIA/Wondermedia VT8500 GPIO Controller ------------------------------------------------------ - -Required properties: -- compatible : "via,vt8500-gpio", "wm,wm8505-gpio" - or "wm,wm8650-gpio" depending on your SoC -- reg : Should contain 1 register range (address and length) -- #gpio-cells : should be <3>. - 1) bank - 2) pin number - 3) flags - should be 0 - -Example: - - gpio: gpio-controller@d8110000 { - compatible = "via,vt8500-gpio"; - gpio-controller; - reg = <0xd8110000 0x10000>; - #gpio-cells = <3>; - }; - - vibrate { - gpios = <&gpio 0 1 0>; /* Bank 0, Pin 1, No flags */ - }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/samsung,s3c24xx-irq.txt b/Documentation/devicetree/bindings/interrupt-controller/samsung,s3c24xx-irq.txt new file mode 100644 index 0000000..c54c5a9 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/samsung,s3c24xx-irq.txt @@ -0,0 +1,53 @@ +Samsung S3C24XX Interrupt Controllers + +The S3C24XX SoCs contain a custom set of interrupt controllers providing a +varying number of interrupt sources. The set consists of a main- and sub- +controller and on newer SoCs even a second main controller. + +Required properties: +- compatible: Compatible property value should be "samsung,s3c2410-irq" + for machines before s3c2416 and "samsung,s3c2416-irq" for s3c2416 and later. + +- reg: Physical base address of the controller and length of memory mapped + region. + +- interrupt-controller : Identifies the node as an interrupt controller + +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. The value shall be 4 and interrupt descriptor shall + have the following format: + <ctrl_num parent_irq ctrl_irq type> + + ctrl_num contains the controller to use: + - 0 ... main controller + - 1 ... sub controller + - 2 ... second main controller on s3c2416 and s3c2450 + parent_irq contains the parent bit in the main controller and will be + ignored in main controllers + ctrl_irq contains the interrupt bit of the controller + type contains the trigger type to use + +Example: + + interrupt-controller@4a000000 { + compatible = "samsung,s3c2410-irq"; + reg = <0x4a000000 0x100>; + interrupt-controller; + #interrupt-cells=<4>; + }; + + [...] + + serial@50000000 { + compatible = "samsung,s3c2410-uart"; + reg = <0x50000000 0x4000>; + interrupt-parent = <&subintc>; + interrupts = <1 28 0 4>, <1 28 1 4>; + }; + + rtc@57000000 { + compatible = "samsung,s3c2410-rtc"; + reg = <0x57000000 0x100>; + interrupt-parent = <&intc>; + interrupts = <0 30 0 3>, <0 8 0 3>; + }; diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nor.txt b/Documentation/devicetree/bindings/mtd/gpmc-nor.txt new file mode 100644 index 0000000..420b3ab --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/gpmc-nor.txt @@ -0,0 +1,98 @@ +Device tree bindings for NOR flash connect to TI GPMC + +NOR flash connected to the TI GPMC (found on OMAP boards) are represented as +child nodes of the GPMC controller with a name of "nor". + +All timing relevant properties as well as generic GPMC child properties are +explained in a separate documents. Please refer to +Documentation/devicetree/bindings/bus/ti-gpmc.txt + +Required properties: +- bank-width: Width of NOR flash in bytes. GPMC supports 8-bit and + 16-bit devices and so must be either 1 or 2 bytes. +- compatible: Documentation/devicetree/bindings/mtd/mtd-physmap.txt +- gpmc,cs-on-ns: Chip-select assertion time +- gpmc,cs-rd-off-ns: Chip-select de-assertion time for reads +- gpmc,cs-wr-off-ns: Chip-select de-assertion time for writes +- gpmc,oe-on-ns: Output-enable assertion time +- gpmc,oe-off-ns: Output-enable de-assertion time +- gpmc,we-on-ns Write-enable assertion time +- gpmc,we-off-ns: Write-enable de-assertion time +- gpmc,access-ns: Start cycle to first data capture (read access) +- gpmc,rd-cycle-ns: Total read cycle time +- gpmc,wr-cycle-ns: Total write cycle time +- linux,mtd-name: Documentation/devicetree/bindings/mtd/mtd-physmap.txt +- reg: Chip-select, base address (relative to chip-select) + and size of NOR flash. Note that base address will be + typically 0 as this is the start of the chip-select. + +Optional properties: +- gpmc,XXX Additional GPMC timings and settings parameters. See + Documentation/devicetree/bindings/bus/ti-gpmc.txt + +Optional properties for partiton table parsing: +- #address-cells: should be set to 1 +- #size-cells: should be set to 1 + +Example: + +gpmc: gpmc@6e000000 { + compatible = "ti,omap3430-gpmc", "simple-bus"; + ti,hwmods = "gpmc"; + reg = <0x6e000000 0x1000>; + interrupts = <20>; + gpmc,num-cs = <8>; + gpmc,num-waitpins = <4>; + #address-cells = <2>; + #size-cells = <1>; + + ranges = <0 0 0x10000000 0x08000000>; + + nor@0,0 { + compatible = "cfi-flash"; + linux,mtd-name= "intel,pf48f6000m0y1be"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0 0 0x08000000>; + bank-width = <2>; + + gpmc,mux-add-data; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <186>; + gpmc,cs-wr-off-ns = <186>; + gpmc,adv-on-ns = <12>; + gpmc,adv-rd-off-ns = <48>; + gpmc,adv-wr-off-ns = <48>; + gpmc,oe-on-ns = <54>; + gpmc,oe-off-ns = <168>; + gpmc,we-on-ns = <54>; + gpmc,we-off-ns = <168>; + gpmc,rd-cycle-ns = <186>; + gpmc,wr-cycle-ns = <186>; + gpmc,access-ns = <114>; + gpmc,page-burst-access-ns = <6>; + gpmc,bus-turnaround-ns = <12>; + gpmc,cycle2cycle-delay-ns = <18>; + gpmc,wr-data-mux-bus-ns = <90>; + gpmc,wr-access-ns = <186>; + gpmc,cycle2cycle-samecsen; + gpmc,cycle2cycle-diffcsen; + + partition@0 { + label = "bootloader-nor"; + reg = <0 0x40000>; + }; + partition@0x40000 { + label = "params-nor"; + reg = <0x40000 0x40000>; + }; + partition@0x80000 { + label = "kernel-nor"; + reg = <0x80000 0x200000>; + }; + partition@0x280000 { + label = "filesystem-nor"; + reg = <0x240000 0x7d80000>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt b/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt index deec9da..b752942 100644 --- a/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt +++ b/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt @@ -10,6 +10,8 @@ Documentation/devicetree/bindings/bus/ti-gpmc.txt Required properties: - reg: The CS line the peripheral is connected to + - gpmc,device-width Width of the ONENAND device connected to the GPMC + in bytes. Must be 1 or 2. Optional properties: @@ -34,6 +36,7 @@ Example for an OMAP3430 board: onenand@0 { reg = <0 0 0>; /* CS0, offset 0 */ + gpmc,device-width = <2>; #address-cells = <1>; #size-cells = <1>; diff --git a/Documentation/devicetree/bindings/net/gpmc-eth.txt b/Documentation/devicetree/bindings/net/gpmc-eth.txt new file mode 100644 index 0000000..24cb4e4 --- /dev/null +++ b/Documentation/devicetree/bindings/net/gpmc-eth.txt @@ -0,0 +1,97 @@ +Device tree bindings for Ethernet chip connected to TI GPMC + +Besides being used to interface with external memory devices, the +General-Purpose Memory Controller can be used to connect Pseudo-SRAM devices +such as ethernet controllers to processors using the TI GPMC as a data bus. + +Ethernet controllers connected to TI GPMC are represented as child nodes of +the GPMC controller with an "ethernet" name. + +All timing relevant properties as well as generic GPMC child properties are +explained in a separate documents. Please refer to +Documentation/devicetree/bindings/bus/ti-gpmc.txt + +For the properties relevant to the ethernet controller connected to the GPMC +refer to the binding documentation of the device. For example, the documentation +for the SMSC 911x is Documentation/devicetree/bindings/net/smsc911x.txt + +Child nodes need to specify the GPMC bus address width using the "bank-width" +property but is possible that an ethernet controller also has a property to +specify the I/O registers address width. Even when the GPMC has a maximum 16-bit +address width, it supports devices with 32-bit word registers. +For example with an SMSC LAN911x/912x controller connected to the TI GPMC on an +OMAP2+ board, "bank-width = <2>;" and "reg-io-width = <4>;". + +Required properties: +- bank-width: Address width of the device in bytes. GPMC supports 8-bit + and 16-bit devices and so must be either 1 or 2 bytes. +- compatible: Compatible string property for the ethernet child device. +- gpmc,cs-on: Chip-select assertion time +- gpmc,cs-rd-off: Chip-select de-assertion time for reads +- gpmc,cs-wr-off: Chip-select de-assertion time for writes +- gpmc,oe-on: Output-enable assertion time +- gpmc,oe-off Output-enable de-assertion time +- gpmc,we-on: Write-enable assertion time +- gpmc,we-off: Write-enable de-assertion time +- gpmc,access: Start cycle to first data capture (read access) +- gpmc,rd-cycle: Total read cycle time +- gpmc,wr-cycle: Total write cycle time +- reg: Chip-select, base address (relative to chip-select) + and size of the memory mapped for the device. + Note that base address will be typically 0 as this + is the start of the chip-select. + +Optional properties: +- gpmc,XXX Additional GPMC timings and settings parameters. See + Documentation/devicetree/bindings/bus/ti-gpmc.txt + +Example: + +gpmc: gpmc@6e000000 { + compatible = "ti,omap3430-gpmc"; + ti,hwmods = "gpmc"; + reg = <0x6e000000 0x1000>; + interrupts = <20>; + gpmc,num-cs = <8>; + gpmc,num-waitpins = <4>; + #address-cells = <2>; + #size-cells = <1>; + + ranges = <5 0 0x2c000000 0x1000000>; + + ethernet@5,0 { + compatible = "smsc,lan9221", "smsc,lan9115"; + reg = <5 0 0xff>; + bank-width = <2>; + + gpmc,mux-add-data; + gpmc,cs-on = <0>; + gpmc,cs-rd-off = <186>; + gpmc,cs-wr-off = <186>; + gpmc,adv-on = <12>; + gpmc,adv-rd-off = <48>; + gpmc,adv-wr-off = <48>; + gpmc,oe-on = <54>; + gpmc,oe-off = <168>; + gpmc,we-on = <54>; + gpmc,we-off = <168>; + gpmc,rd-cycle = <186>; + gpmc,wr-cycle = <186>; + gpmc,access = <114>; + gpmc,page-burst-access = <6>; + gpmc,bus-turnaround = <12>; + gpmc,cycle2cycle-delay = <18>; + gpmc,wr-data-mux-bus = <90>; + gpmc,wr-access = <186>; + gpmc,cycle2cycle-samecsen; + gpmc,cycle2cycle-diffcsen; + + interrupt-parent = <&gpio6>; + interrupts = <16>; + vmmc-supply = <&vddvario>; + vmmc_aux-supply = <&vdd33a>; + reg-io-width = <4>; + + smsc,save-mac-address; + }; +}; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-vt8500.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-vt8500.txt new file mode 100644 index 0000000..b3aa90f --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-vt8500.txt @@ -0,0 +1,57 @@ +VIA VT8500 and Wondermedia WM8xxx-series pinmux/gpio controller + +These SoCs contain a combined Pinmux/GPIO module. Each pin may operate as +either a GPIO in, GPIO out or as an alternate function (I2C, SPI etc). + +Required properties: +- compatible: "via,vt8500-pinctrl", "wm,wm8505-pinctrl", "wm,wm8650-pinctrl", + "wm8750-pinctrl" or "wm,wm8850-pinctrl" +- reg: Should contain the physical address of the module's registers. +- interrupt-controller: Marks the device node as an interrupt controller. +- #interrupt-cells: Should be two. +- gpio-controller: Marks the device node as a GPIO controller. +- #gpio-cells : Should be two. The first cell is the pin number and the + second cell is used to specify optional parameters. + bit 0 - active low + +Please refer to ../gpio/gpio.txt for a general description of GPIO bindings. + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +Each pin configuration node lists the pin(s) to which it applies, and one or +more of the mux functions to select on those pin(s), and pull-up/down +configuration. Each subnode only affects those parameters that are explicitly +listed. In other words, a subnode that lists only a mux function implies no +information about any pull configuration. Similarly, a subnode that lists only +a pull parameter implies no information about the mux function. + +Required subnode-properties: +- wm,pins: An array of cells. Each cell contains the ID of a pin. + +Optional subnode-properties: +- wm,function: Integer, containing the function to mux to the pin(s): + 0: GPIO in + 1: GPIO out + 2: alternate + +- wm,pull: Integer, representing the pull-down/up to apply to the pin(s): + 0: none + 1: down + 2: up + +Each of wm,function and wm,pull may contain either a single value which +will be applied to all pins in wm,pins, or one value for each entry in +wm,pins. + +Example: + + pinctrl: pinctrl { + compatible = "wm,wm8505-pinctrl"; + reg = <0xD8110000 0x10000>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/timer/cadence,ttc-timer.txt b/Documentation/devicetree/bindings/timer/cadence,ttc-timer.txt new file mode 100644 index 0000000..993695c --- /dev/null +++ b/Documentation/devicetree/bindings/timer/cadence,ttc-timer.txt @@ -0,0 +1,17 @@ +Cadence TTC - Triple Timer Counter + +Required properties: +- compatible : Should be "cdns,ttc". +- reg : Specifies base physical address and size of the registers. +- interrupts : A list of 3 interrupts; one per timer channel. +- clocks: phandle to the source clock + +Example: + +ttc0: ttc0@f8001000 { + interrupt-parent = <&intc>; + interrupts = < 0 10 4 0 11 4 0 12 4 >; + compatible = "cdns,ttc"; + reg = <0xF8001000 0x1000>; + clocks = <&cpu_clk 3>; +}; diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 8ffab89..1dc16e5 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -673,6 +673,7 @@ config ARCH_TEGRA select HAVE_CLK select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 + select SOC_BUS select SPARSE_IRQ select USE_OF help @@ -777,6 +778,7 @@ config ARCH_S3C24XX select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG select HAVE_S3C_RTC if RTC_CLASS + select MULTI_IRQ_HANDLER select NEED_MACH_GPIO_H select NEED_MACH_IO_H help @@ -1599,6 +1601,7 @@ config HAVE_ARM_ARCH_TIMER config HAVE_ARM_TWD bool depends on SMP + select CLKSRC_OF if OF help This options enables support for the ARM timer and watchdog unit @@ -1667,7 +1670,8 @@ config ARCH_NR_GPIO default 1024 if ARCH_SHMOBILE || ARCH_TEGRA default 512 if SOC_OMAP5 default 355 if ARCH_U8500 - default 288 if ARCH_VT8500 || ARCH_SUNXI + default 352 if ARCH_VT8500 + default 288 if ARCH_SUNXI default 264 if MACH_H4700 default 0 help diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts index 15dc0a3..53bc8bf 100644 --- a/arch/arm/boot/dts/exynos4412-odroidx.dts +++ b/arch/arm/boot/dts/exynos4412-odroidx.dts @@ -39,6 +39,8 @@ }; mshc@12550000 { + #address-cells = <1>; + #size-cells = <0>; pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; pinctrl-names = "default"; status = "okay"; diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index a5478bd..1fecf76 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -45,6 +45,8 @@ }; mshc@12550000 { + #address-cells = <1>; + #size-cells = <0>; pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; pinctrl-names = "default"; status = "okay"; diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index f624dc8..02d23f1 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -38,6 +38,57 @@ }; }; + /* HS USB Port 2 RESET */ + hsusb2_reset: hsusb2_reset_reg { + compatible = "regulator-fixed"; + regulator-name = "hsusb2_reset"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio5 19 0>; /* gpio_147 */ + startup-delay-us = <70000>; + enable-active-high; + }; + + /* HS USB Port 2 Power */ + hsusb2_power: hsusb2_power_reg { + compatible = "regulator-fixed"; + regulator-name = "hsusb2_vbus"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&twl_gpio 18 0>; /* GPIO LEDA */ + startup-delay-us = <70000>; + }; + + /* HS USB Host PHY on PORT 2 */ + hsusb2_phy: hsusb2_phy { + compatible = "usb-nop-xceiv"; + reset-supply = <&hsusb2_reset>; + vcc-supply = <&hsusb2_power>; + }; +}; + +&omap3_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = < + &hsusbb2_pins + >; + + hsusbb2_pins: pinmux_hsusbb2_pins { + pinctrl-single,pins = < + 0x5c0 0x3 /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_clk OUTPUT */ + 0x5c2 0x3 /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_stp OUTPUT */ + 0x5c4 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dir INPUT | PULLDOWN */ + 0x5c6 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_nxt INPUT | PULLDOWN */ + 0x5c8 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat0 INPUT | PULLDOWN */ + 0x5cA 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat1 INPUT | PULLDOWN */ + 0x1a4 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat2 INPUT | PULLDOWN */ + 0x1a6 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat3 INPUT | PULLDOWN */ + 0x1a8 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat4 INPUT | PULLDOWN */ + 0x1aa 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat5 INPUT | PULLDOWN */ + 0x1ac 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat6 INPUT | PULLDOWN */ + 0x1ae 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat7 INPUT | PULLDOWN */ + >; + }; }; &i2c1 { @@ -65,3 +116,23 @@ &mmc3 { status = "disabled"; }; + +&usbhshost { + port2-mode = "ehci-phy"; +}; + +&usbhsehci { + phys = <0 &hsusb2_phy>; +}; + +&twl_gpio { + ti,use-leds; + /* pullups: BIT(1) */ + ti,pullups = <0x000002>; + /* + * pulldowns: + * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13) + * BIT(15), BIT(16), BIT(17) + */ + ti,pulldowns = <0x03a1c4>; +}; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 1acc261..a14f74b 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -397,5 +397,36 @@ ti,timer-alwon; ti,timer-secure; }; + + usbhstll: usbhstll@48062000 { + compatible = "ti,usbhs-tll"; + reg = <0x48062000 0x1000>; + interrupts = <78>; + ti,hwmods = "usb_tll_hs"; + }; + + usbhshost: usbhshost@48064000 { + compatible = "ti,usbhs-host"; + reg = <0x48064000 0x400>; + ti,hwmods = "usb_host_hs"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + usbhsohci: ohci@48064400 { + compatible = "ti,ohci-omap3", "usb-ohci"; + reg = <0x48064400 0x400>; + interrupt-parent = <&intc>; + interrupts = <76>; + }; + + usbhsehci: ehci@48064800 { + compatible = "ti,ehci-omap", "usb-ehci"; + reg = <0x48064800 0x400>; + interrupt-parent = <&intc>; + interrupts = <77>; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 739bb79..b7db1a2 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -529,5 +529,35 @@ ti,hwmods = "timer11"; ti,timer-pwm; }; + + usbhstll: usbhstll@4a062000 { + compatible = "ti,usbhs-tll"; + reg = <0x4a062000 0x1000>; + interrupts = <0 78 0x4>; + ti,hwmods = "usb_tll_hs"; + }; + + usbhshost: usbhshost@4a064000 { + compatible = "ti,usbhs-host"; + reg = <0x4a064000 0x800>; + ti,hwmods = "usb_host_hs"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + usbhsohci: ohci@4a064800 { + compatible = "ti,ohci-omap3", "usb-ohci"; + reg = <0x4a064800 0x400>; + interrupt-parent = <&gic>; + interrupts = <0 76 0x4>; + }; + + usbhsehci: ehci@4a064c00 { + compatible = "ti,ehci-omap", "usb-ehci"; + reg = <0x4a064c00 0x400>; + interrupt-parent = <&gic>; + interrupts = <0 77 0x4>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi new file mode 100644 index 0000000..fe5c6f2 --- /dev/null +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -0,0 +1,98 @@ +/* + * Device Tree Source for Renesas r8a7779 + * + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Simon Horman + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "renesas,r8a7779"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <1>; + }; + cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <2>; + }; + cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <3>; + }; + }; + + gic: interrupt-controller@f0001000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0xf0001000 0x1000>, + <0xf0000100 0x100>; + }; + + i2c0: i2c@0xffc70000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0xffc70000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 79 0x4>; + }; + + i2c1: i2c@0xffc71000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0xffc71000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 82 0x4>; + }; + + i2c2: i2c@0xffc72000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0xffc72000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 80 0x4>; + }; + + i2c3: i2c@0xffc73000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0xffc73000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 81 0x4>; + }; + + thermal@ffc48000 { + compatible = "renesas,rcar-thermal"; + reg = <0xffc48000 0x38>; + }; + + sata: sata@fc600000 { + compatible = "renesas,rcar-sata"; + reg = <0xfc600000 0x2000>; + interrupt-parent = <&gic>; + interrupts = <0 100 0x4>; + }; +}; diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts index a30aca6..616990d 100644 --- a/arch/arm/boot/dts/tegra114-dalmore.dts +++ b/arch/arm/boot/dts/tegra114-dalmore.dts @@ -12,10 +12,22 @@ serial@70006300 { status = "okay"; - clock-frequency = <408000000>; }; pmc { nvidia,invert-interrupt; }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; }; diff --git a/arch/arm/boot/dts/tegra114-pluto.dts b/arch/arm/boot/dts/tegra114-pluto.dts index 9bea8f5..6bbc8ef 100644 --- a/arch/arm/boot/dts/tegra114-pluto.dts +++ b/arch/arm/boot/dts/tegra114-pluto.dts @@ -12,10 +12,22 @@ serial@70006300 { status = "okay"; - clock-frequency = <408000000>; }; pmc { nvidia,invert-interrupt; }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; }; diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi index 1dfaf28..c1110a9 100644 --- a/arch/arm/boot/dts/tegra114.dtsi +++ b/arch/arm/boot/dts/tegra114.dtsi @@ -24,10 +24,11 @@ 0 42 0x04 0 121 0x04 0 122 0x04>; + clocks = <&tegra_car 5>; }; tegra_car: clock { - compatible = "nvidia,tegra114-car, nvidia,tegra30-car"; + compatible = "nvidia,tegra114-car"; reg = <0x60006000 0x1000>; #clock-cells = <1>; }; @@ -66,6 +67,7 @@ reg-shift = <2>; interrupts = <0 36 0x04>; status = "disabled"; + clocks = <&tegra_car 6>; }; serial@70006040 { @@ -74,6 +76,7 @@ reg-shift = <2>; interrupts = <0 37 0x04>; status = "disabled"; + clocks = <&tegra_car 192>; }; serial@70006200 { @@ -82,6 +85,7 @@ reg-shift = <2>; interrupts = <0 46 0x04>; status = "disabled"; + clocks = <&tegra_car 55>; }; serial@70006300 { @@ -90,17 +94,21 @@ reg-shift = <2>; interrupts = <0 90 0x04>; status = "disabled"; + clocks = <&tegra_car 65>; }; rtc { compatible = "nvidia,tegra114-rtc", "nvidia,tegra20-rtc"; reg = <0x7000e000 0x100>; interrupts = <0 2 0x04>; + clocks = <&tegra_car 4>; }; pmc { - compatible = "nvidia,tegra114-pmc", "nvidia,tegra30-pmc"; + compatible = "nvidia,tegra114-pmc"; reg = <0x7000e400 0x400>; + clocks = <&tegra_car 261>, <&clk32k_in>; + clock-names = "pclk", "clk32k_in"; }; iommu { diff --git a/arch/arm/boot/dts/tegra20-colibri-512.dtsi b/arch/arm/boot/dts/tegra20-colibri-512.dtsi index 4441620..4e3afde 100644 --- a/arch/arm/boot/dts/tegra20-colibri-512.dtsi +++ b/arch/arm/boot/dts/tegra20-colibri-512.dtsi @@ -444,7 +444,20 @@ }; sdhci@c8000600 { - cd-gpios = <&gpio 23 0>; /* gpio PC7 */ + cd-gpios = <&gpio 23 1>; /* gpio PC7 */ + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; }; sound { diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts index 61d027f..ae9d5a2 100644 --- a/arch/arm/boot/dts/tegra20-harmony.dts +++ b/arch/arm/boot/dts/tegra20-harmony.dts @@ -437,7 +437,7 @@ sdhci@c8000200 { status = "okay"; - cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + cd-gpios = <&gpio 69 1>; /* gpio PI5 */ wp-gpios = <&gpio 57 0>; /* gpio PH1 */ power-gpios = <&gpio 155 0>; /* gpio PT3 */ bus-width = <4>; @@ -445,12 +445,25 @@ sdhci@c8000600 { status = "okay"; - cd-gpios = <&gpio 58 0>; /* gpio PH2 */ + cd-gpios = <&gpio 58 1>; /* gpio PH2 */ wp-gpios = <&gpio 59 0>; /* gpio PH3 */ power-gpios = <&gpio 70 0>; /* gpio PI6 */ bus-width = <8>; }; + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + kbc { status = "okay"; nvidia,debounce-delay-ms = <2>; diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index 54d6fce..fd60940 100644 --- a/arch/arm/boot/dts/tegra20-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -436,7 +436,7 @@ sdhci@c8000000 { status = "okay"; - cd-gpios = <&gpio 173 0>; /* gpio PV5 */ + cd-gpios = <&gpio 173 1>; /* gpio PV5 */ wp-gpios = <&gpio 57 0>; /* gpio PH1 */ power-gpios = <&gpio 169 0>; /* gpio PV1 */ bus-width = <4>; @@ -447,6 +447,19 @@ bus-width = <8>; }; + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + gpio-keys { compatible = "gpio-keys"; diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index 37b3a57..4ee700a 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -584,7 +584,7 @@ sdhci@c8000400 { status = "okay"; - cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + cd-gpios = <&gpio 69 1>; /* gpio PI5 */ wp-gpios = <&gpio 57 0>; /* gpio PH1 */ power-gpios = <&gpio 70 0>; /* gpio PI6 */ bus-width = <4>; @@ -595,6 +595,19 @@ bus-width = <8>; }; + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + gpio-keys { compatible = "gpio-keys"; diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi index 4766aba..c190257 100644 --- a/arch/arm/boot/dts/tegra20-tamonten.dtsi +++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi @@ -465,12 +465,25 @@ }; sdhci@c8000600 { - cd-gpios = <&gpio 58 0>; /* gpio PH2 */ + cd-gpios = <&gpio 58 1>; /* gpio PH2 */ wp-gpios = <&gpio 59 0>; /* gpio PH3 */ bus-width = <4>; status = "okay"; }; + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + regulators { compatible = "simple-bus"; diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts index 5d79e4f..a9f3f06 100644 --- a/arch/arm/boot/dts/tegra20-trimslice.dts +++ b/arch/arm/boot/dts/tegra20-trimslice.dts @@ -325,11 +325,24 @@ sdhci@c8000600 { status = "okay"; - cd-gpios = <&gpio 121 0>; /* gpio PP1 */ + cd-gpios = <&gpio 121 1>; /* gpio PP1 */ wp-gpios = <&gpio 122 0>; /* gpio PP2 */ bus-width = <4>; }; + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + poweroff { compatible = "gpio-poweroff"; gpios = <&gpio 191 1>; /* gpio PX7, active low */ diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts index 425c890..f544806 100644 --- a/arch/arm/boot/dts/tegra20-ventana.dts +++ b/arch/arm/boot/dts/tegra20-ventana.dts @@ -520,7 +520,7 @@ sdhci@c8000400 { status = "okay"; - cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + cd-gpios = <&gpio 69 1>; /* gpio PI5 */ wp-gpios = <&gpio 57 0>; /* gpio PH1 */ power-gpios = <&gpio 70 0>; /* gpio PI6 */ bus-width = <4>; @@ -531,6 +531,19 @@ bus-width = <8>; }; + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + regulators { compatible = "simple-bus"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts index ea57c0f..258cf94 100644 --- a/arch/arm/boot/dts/tegra20-whistler.dts +++ b/arch/arm/boot/dts/tegra20-whistler.dts @@ -510,6 +510,7 @@ sdhci@c8000400 { status = "okay"; + cd-gpios = <&gpio 69 1>; /* gpio PI5 */ wp-gpios = <&gpio 173 0>; /* gpio PV5 */ bus-width = <8>; }; @@ -519,6 +520,19 @@ bus-width = <8>; }; + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + kbc { status = "okay"; nvidia,debounce-delay-ms = <20>; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 3d3f64d..fc7febc 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -145,6 +145,7 @@ 0 1 0x04 0 41 0x04 0 42 0x04>; + clocks = <&tegra_car 5>; }; tegra_car: clock { @@ -304,6 +305,7 @@ compatible = "nvidia,tegra20-rtc"; reg = <0x7000e000 0x100>; interrupts = <0 2 0x04>; + clocks = <&tegra_car 4>; }; i2c@7000c000 { @@ -416,6 +418,8 @@ pmc { compatible = "nvidia,tegra20-pmc"; reg = <0x7000e400 0x400>; + clocks = <&tegra_car 110>, <&clk32k_in>; + clock-names = "pclk", "clk32k_in"; }; memory-controller@7000f000 { diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts index 8ff2ff2..6248b24 100644 --- a/arch/arm/boot/dts/tegra30-beaver.dts +++ b/arch/arm/boot/dts/tegra30-beaver.dts @@ -257,7 +257,7 @@ sdhci@78000000 { status = "okay"; - cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + cd-gpios = <&gpio 69 1>; /* gpio PI5 */ wp-gpios = <&gpio 155 0>; /* gpio PT3 */ power-gpios = <&gpio 31 0>; /* gpio PD7 */ bus-width = <4>; @@ -268,6 +268,19 @@ bus-width = <8>; }; + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + regulators { compatible = "simple-bus"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index 1749927..65bf2b6 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -311,7 +311,7 @@ sdhci@78000000 { status = "okay"; - cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + cd-gpios = <&gpio 69 1>; /* gpio PI5 */ wp-gpios = <&gpio 155 0>; /* gpio PT3 */ power-gpios = <&gpio 31 0>; /* gpio PD7 */ bus-width = <4>; @@ -322,6 +322,19 @@ bus-width = <8>; }; + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + regulators { compatible = "simple-bus"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index dbf46c2..9fe7a92 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -148,6 +148,7 @@ 0 42 0x04 0 121 0x04 0 122 0x04>; + clocks = <&tegra_car 5>; }; tegra_car: clock { @@ -291,6 +292,7 @@ compatible = "nvidia,tegra30-rtc", "nvidia,tegra20-rtc"; reg = <0x7000e000 0x100>; interrupts = <0 2 0x04>; + clocks = <&tegra_car 4>; }; i2c@7000c000 { @@ -423,8 +425,10 @@ }; pmc { - compatible = "nvidia,tegra20-pmc", "nvidia,tegra30-pmc"; + compatible = "nvidia,tegra30-pmc"; reg = <0x7000e400 0x400>; + clocks = <&tegra_car 218>, <&clk32k_in>; + clock-names = "pclk", "clk32k_in"; }; memory-controller { diff --git a/arch/arm/boot/dts/vt8500.dtsi b/arch/arm/boot/dts/vt8500.dtsi index cf31ced..e1c3926 100644 --- a/arch/arm/boot/dts/vt8500.dtsi +++ b/arch/arm/boot/dts/vt8500.dtsi @@ -25,11 +25,13 @@ #interrupt-cells = <1>; }; - gpio: gpio-controller@d8110000 { - compatible = "via,vt8500-gpio"; - gpio-controller; + pinctrl: pinctrl@d8110000 { + compatible = "via,vt8500-pinctrl"; reg = <0xd8110000 0x10000>; - #gpio-cells = <3>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; }; pmc@d8130000 { diff --git a/arch/arm/boot/dts/wm8505.dtsi b/arch/arm/boot/dts/wm8505.dtsi index e74a1c0..bb92ef8 100644 --- a/arch/arm/boot/dts/wm8505.dtsi +++ b/arch/arm/boot/dts/wm8505.dtsi @@ -40,11 +40,13 @@ interrupts = <56 57 58 59 60 61 62 63>; }; - gpio: gpio-controller@d8110000 { - compatible = "wm,wm8505-gpio"; - gpio-controller; + pinctrl: pinctrl@d8110000 { + compatible = "wm,wm8505-pinctrl"; reg = <0xd8110000 0x10000>; - #gpio-cells = <3>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; }; pmc@d8130000 { diff --git a/arch/arm/boot/dts/wm8650.dtsi b/arch/arm/boot/dts/wm8650.dtsi index db3c0a1..bb4af58 100644 --- a/arch/arm/boot/dts/wm8650.dtsi +++ b/arch/arm/boot/dts/wm8650.dtsi @@ -34,11 +34,13 @@ interrupts = <56 57 58 59 60 61 62 63>; }; - gpio: gpio-controller@d8110000 { - compatible = "wm,wm8650-gpio"; - gpio-controller; + pinctrl: pinctrl@d8110000 { + compatible = "wm,wm8650-pinctrl"; reg = <0xd8110000 0x10000>; - #gpio-cells = <3>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; }; pmc@d8130000 { diff --git a/arch/arm/boot/dts/wm8850.dtsi b/arch/arm/boot/dts/wm8850.dtsi index e8cbfdc..11cd180 100644 --- a/arch/arm/boot/dts/wm8850.dtsi +++ b/arch/arm/boot/dts/wm8850.dtsi @@ -41,11 +41,13 @@ interrupts = <56 57 58 59 60 61 62 63>; }; - gpio: gpio-controller@d8110000 { - compatible = "wm,wm8650-gpio"; - gpio-controller; + pinctrl: pinctrl@d8110000 { + compatible = "wm,wm8850-pinctrl"; reg = <0xd8110000 0x10000>; - #gpio-cells = <3>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; }; pmc@d8130000 { diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index 5914b56..51243db 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -111,56 +111,23 @@ }; ttc0: ttc0@f8001000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "xlnx,ttc"; + interrupt-parent = <&intc>; + interrupts = < 0 10 4 0 11 4 0 12 4 >; + compatible = "cdns,ttc"; reg = <0xF8001000 0x1000>; clocks = <&cpu_clk 3>; clock-names = "cpu_1x"; clock-ranges; - - ttc0_0: ttc0.0 { - status = "disabled"; - reg = <0>; - interrupts = <0 10 4>; - }; - ttc0_1: ttc0.1 { - status = "disabled"; - reg = <1>; - interrupts = <0 11 4>; - }; - ttc0_2: ttc0.2 { - status = "disabled"; - reg = <2>; - interrupts = <0 12 4>; - }; }; ttc1: ttc1@f8002000 { - #interrupt-parent = <&intc>; - #address-cells = <1>; - #size-cells = <0>; - compatible = "xlnx,ttc"; + interrupt-parent = <&intc>; + interrupts = < 0 37 4 0 38 4 0 39 4 >; + compatible = "cdns,ttc"; reg = <0xF8002000 0x1000>; clocks = <&cpu_clk 3>; clock-names = "cpu_1x"; clock-ranges; - - ttc1_0: ttc1.0 { - status = "disabled"; - reg = <0>; - interrupts = <0 37 4>; - }; - ttc1_1: ttc1.1 { - status = "disabled"; - reg = <1>; - interrupts = <0 38 4>; - }; - ttc1_2: ttc1.2 { - status = "disabled"; - reg = <2>; - interrupts = <0 39 4>; - }; }; }; }; diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts index c772942..86f44d5 100644 --- a/arch/arm/boot/dts/zynq-zc702.dts +++ b/arch/arm/boot/dts/zynq-zc702.dts @@ -32,13 +32,3 @@ &ps_clk { clock-frequency = <33333330>; }; - -&ttc0_0 { - status = "ok"; - compatible = "xlnx,ttc-counter-clocksource"; -}; - -&ttc0_1 { - status = "ok"; - compatible = "xlnx,ttc-counter-clockevent"; -}; diff --git a/arch/arm/include/asm/smp_twd.h b/arch/arm/include/asm/smp_twd.h index 0f01f46..7b2899c 100644 --- a/arch/arm/include/asm/smp_twd.h +++ b/arch/arm/include/asm/smp_twd.h @@ -34,12 +34,4 @@ struct twd_local_timer name __initdata = { \ int twd_local_timer_register(struct twd_local_timer *); -#ifdef CONFIG_HAVE_ARM_TWD -void twd_local_timer_of_register(void); -#else -static inline void twd_local_timer_of_register(void) -{ -} -#endif - #endif diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 0f82098..cd22d82 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -562,21 +562,21 @@ ENDPROC(__und_usr) @ Fall-through from Thumb-2 __und_usr @ #ifdef CONFIG_NEON + get_thread_info r10 @ get current thread adr r6, .LCneon_thumb_opcodes b 2f #endif call_fpe: + get_thread_info r10 @ get current thread #ifdef CONFIG_NEON adr r6, .LCneon_arm_opcodes -2: - ldr r7, [r6], #4 @ mask value - cmp r7, #0 @ end mask? - beq 1f - and r8, r0, r7 +2: ldr r5, [r6], #4 @ mask value ldr r7, [r6], #4 @ opcode bits matching in mask + cmp r5, #0 @ end mask? + beq 1f + and r8, r0, r5 cmp r8, r7 @ NEON instruction? bne 2b - get_thread_info r10 mov r7, #1 strb r7, [r10, #TI_USED_CP + 10] @ mark CP#10 as used strb r7, [r10, #TI_USED_CP + 11] @ mark CP#11 as used @@ -586,7 +586,6 @@ call_fpe: tst r0, #0x08000000 @ only CDP/CPRT/LDC/STC have bit 27 tstne r0, #0x04000000 @ bit 26 set on both ARM and Thumb-2 moveq pc, lr - get_thread_info r10 @ get current thread and r8, r0, #0x00000f00 @ mask out CP number THUMB( lsr r8, r8, #8 ) mov r7, #1 diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 047d3e4..cbd0f51 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -459,15 +459,16 @@ unsigned long arch_randomize_brk(struct mm_struct *mm) * atomic helpers and the signal restart code. Insert it into the * gate_vma so that it is visible through ptrace and /proc/<pid>/mem. */ -static struct vm_area_struct gate_vma; +static struct vm_area_struct gate_vma = { + .vm_start = 0xffff0000, + .vm_end = 0xffff0000 + PAGE_SIZE, + .vm_flags = VM_READ | VM_EXEC | VM_MAYREAD | VM_MAYEXEC, + .vm_mm = &init_mm, +}; static int __init gate_vma_init(void) { - gate_vma.vm_start = 0xffff0000; - gate_vma.vm_end = 0xffff0000 + PAGE_SIZE; - gate_vma.vm_page_prot = PAGE_READONLY_EXEC; - gate_vma.vm_flags = VM_READ | VM_EXEC | - VM_MAYREAD | VM_MAYEXEC; + gate_vma.vm_page_prot = PAGE_READONLY_EXEC; return 0; } arch_initcall(gate_vma_init); diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index 3f25650..90525d9 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -362,25 +362,13 @@ int __init twd_local_timer_register(struct twd_local_timer *tlt) } #ifdef CONFIG_OF -const static struct of_device_id twd_of_match[] __initconst = { - { .compatible = "arm,cortex-a9-twd-timer", }, - { .compatible = "arm,cortex-a5-twd-timer", }, - { .compatible = "arm,arm11mp-twd-timer", }, - { }, -}; - -void __init twd_local_timer_of_register(void) +static void __init twd_local_timer_of_register(struct device_node *np) { - struct device_node *np; int err; if (!is_smp() || !setup_max_cpus) return; - np = of_find_matching_node(NULL, twd_of_match); - if (!np) - return; - twd_ppi = irq_of_parse_and_map(np, 0); if (!twd_ppi) { err = -EINVAL; @@ -398,4 +386,7 @@ void __init twd_local_timer_of_register(void) out: WARN(err, "twd_local_timer_of_register failed (%d)\n", err); } +CLOCKSOURCE_OF_DECLARE(arm_twd_a9, "arm,cortex-a9-twd-timer", twd_local_timer_of_register); +CLOCKSOURCE_OF_DECLARE(arm_twd_a5, "arm,cortex-a5-twd-timer", twd_local_timer_of_register); +CLOCKSOURCE_OF_DECLARE(arm_twd_11mp, "arm,arm11mp-twd-timer", twd_local_timer_of_register); #endif diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index 2998a08..0204f4c 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -169,6 +169,8 @@ static struct clk *periph_clocks[] __initdata = { }; static struct clk_lookup periph_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("hclk", "at91sam9261-lcdfb.0", &hck1), + CLKDEV_CON_DEV_ID("hclk", "at91sam9g10-lcdfb.0", &hck1), CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 92e0f86..629ea5f 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -488,7 +488,6 @@ static struct resource lcdc_resources[] = { }; static struct platform_device at91_lcdc_device = { - .name = "atmel_lcdfb", .id = 0, .dev = { .dma_mask = &lcdc_dmamask, @@ -505,6 +504,11 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) return; } + if (cpu_is_at91sam9g10()) + at91_lcdc_device.name = "at91sam9g10-lcdfb"; + else + at91_lcdc_device.name = "at91sam9261-lcdfb"; + #if defined(CONFIG_FB_ATMEL_STN) at91_set_A_periph(AT91_PIN_PB0, 0); /* LCDVSYNC */ at91_set_A_periph(AT91_PIN_PB1, 0); /* LCDHSYNC */ diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index b9fc60d..2282fd7 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -190,6 +190,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.1", &ssc1_clk), CLKDEV_CON_DEV_ID("pclk", "fff98000.ssc", &ssc0_clk), CLKDEV_CON_DEV_ID("pclk", "fff9c000.ssc", &ssc1_clk), + CLKDEV_CON_DEV_ID("hclk", "at91sam9263-lcdfb.0", &lcdc_clk), CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.0", &mmc0_clk), CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.1", &mmc1_clk), CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index ed666f5..858c8aa 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -848,7 +848,7 @@ static struct resource lcdc_resources[] = { }; static struct platform_device at91_lcdc_device = { - .name = "atmel_lcdfb", + .name = "at91sam9263-lcdfb", .id = 0, .dev = { .dma_mask = &lcdc_dmamask, diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index d3addee..c68960d 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -228,6 +228,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_ID("hclk", &macb_clk), /* One additional fake clock for ohci */ CLKDEV_CON_ID("ohci_clk", &uhphs_clk), + CLKDEV_CON_DEV_ID("hclk", "at91sam9g45-lcdfb.0", &lcdc_clk), + CLKDEV_CON_DEV_ID("hclk", "at91sam9g45es-lcdfb.0", &lcdc_clk), CLKDEV_CON_DEV_ID("ehci_clk", "atmel-ehci", &uhphs_clk), CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk), CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk), diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index 827c9f2..fe626d4 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -981,7 +981,6 @@ static struct resource lcdc_resources[] = { }; static struct platform_device at91_lcdc_device = { - .name = "atmel_lcdfb", .id = 0, .dev = { .dma_mask = &lcdc_dmamask, @@ -997,6 +996,11 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) if (!data) return; + if (cpu_is_at91sam9g45es()) + at91_lcdc_device.name = "at91sam9g45es-lcdfb"; + else + at91_lcdc_device.name = "at91sam9g45-lcdfb"; + at91_set_A_periph(AT91_PIN_PE0, 0); /* LCDDPWR */ at91_set_A_periph(AT91_PIN_PE2, 0); /* LCDCC */ diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index eb98704..3de3e04 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -179,6 +179,7 @@ static struct clk *periph_clocks[] __initdata = { }; static struct clk_lookup periph_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("hclk", "at91sam9rl-lcdfb.0", &lcdc_clk), CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk), CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk), CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index ddf223f..352468f 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -514,7 +514,7 @@ static struct resource lcdc_resources[] = { }; static struct platform_device at91_lcdc_device = { - .name = "atmel_lcdfb", + .name = "at91sam9rl-lcdfb", .id = 0, .dev = { .dma_mask = &lcdc_dmamask, diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index 02e35ab..d3efd67 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -797,6 +797,7 @@ static int __init exynos_init_irq_eint(void) static const struct of_device_id exynos_pinctrl_ids[] = { { .compatible = "samsung,exynos4210-pinctrl", }, { .compatible = "samsung,exynos4x12-pinctrl", }, + { .compatible = "samsung,exynos5250-pinctrl", }, }; struct device_node *pctrl_np, *wkup_np; const char *wkup_compat = "samsung,exynos4210-wakeup-eint"; diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c index a4f9f50..76c1170 100644 --- a/arch/arm/mach-highbank/highbank.c +++ b/arch/arm/mach-highbank/highbank.c @@ -32,7 +32,6 @@ #include <asm/cacheflush.h> #include <asm/cputype.h> #include <asm/smp_plat.h> -#include <asm/smp_twd.h> #include <asm/hardware/arm_timer.h> #include <asm/hardware/timer-sp.h> #include <asm/hardware/cache-l2x0.h> @@ -119,10 +118,10 @@ static void __init highbank_timer_init(void) sp804_clocksource_and_sched_clock_init(timer_base + 0x20, "timer1"); sp804_clockevents_init(timer_base, irq, "timer0"); - twd_local_timer_of_register(); - arch_timer_of_register(); arch_timer_sched_clock_init(); + + clocksource_of_init(); } static void highbank_power_off(void) diff --git a/arch/arm/mach-imx/clk-busy.c b/arch/arm/mach-imx/clk-busy.c index 1ab91b5..85b728c 100644 --- a/arch/arm/mach-imx/clk-busy.c +++ b/arch/arm/mach-imx/clk-busy.c @@ -169,7 +169,7 @@ struct clk *imx_clk_busy_mux(const char *name, void __iomem *reg, u8 shift, busy->mux.reg = reg; busy->mux.shift = shift; - busy->mux.width = width; + busy->mux.mask = BIT(width) - 1; busy->mux.lock = &imx_ccm_lock; busy->mux_ops = &clk_mux_ops; diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 9ffd103..b59ddcb 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -12,6 +12,7 @@ #include <linux/clk.h> #include <linux/clkdev.h> +#include <linux/clocksource.h> #include <linux/cpu.h> #include <linux/delay.h> #include <linux/export.h> @@ -28,11 +29,9 @@ #include <linux/regmap.h> #include <linux/micrel_phy.h> #include <linux/mfd/syscon.h> -#include <asm/smp_twd.h> #include <asm/hardware/cache-l2x0.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <asm/mach/time.h> #include <asm/system_misc.h> #include "common.h" @@ -292,7 +291,7 @@ static void __init imx6q_init_irq(void) static void __init imx6q_timer_init(void) { mx6q_clocks_init(); - twd_local_timer_of_register(); + clocksource_of_init(); imx_print_silicon_rev("i.MX6Q", imx6q_revision()); } diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index ea96144..b23c8e4 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -536,16 +536,14 @@ static void __init ap_init_of(void) 'A' + (ap_sc_id & 0x0f)); soc_dev = soc_device_register(soc_dev_attr); - if (IS_ERR_OR_NULL(soc_dev)) { + if (IS_ERR(soc_dev)) { kfree(soc_dev_attr->revision); kfree(soc_dev_attr); return; } parent = soc_device_to_device(soc_dev); - - if (!IS_ERR_OR_NULL(parent)) - integrator_init_sysfs(parent, ap_sc_id); + integrator_init_sysfs(parent, ap_sc_id); of_platform_populate(root, of_default_bus_match_table, ap_auxdata_lookup, parent); diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index 2b0db82..da1091b 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -360,17 +360,14 @@ static void __init intcp_init_of(void) 'A' + (intcp_sc_id & 0x0f)); soc_dev = soc_device_register(soc_dev_attr); - if (IS_ERR_OR_NULL(soc_dev)) { + if (IS_ERR(soc_dev)) { kfree(soc_dev_attr->revision); kfree(soc_dev_attr); return; } parent = soc_device_to_device(soc_dev); - - if (!IS_ERR_OR_NULL(parent)) - integrator_init_sysfs(parent, intcp_sc_id); - + integrator_init_sysfs(parent, intcp_sc_id); of_platform_populate(root, of_default_bus_match_table, intcp_auxdata_lookup, parent); } diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index 903da8e..cdd05f2 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -55,12 +55,6 @@ config MACH_OMAP_H3 TI OMAP 1710 H3 board support. Say Y here if you have such a board. -config MACH_OMAP_HTCWIZARD - bool "HTC Wizard" - depends on ARCH_OMAP850 - help - HTC Wizard smartphone support (AKA QTEK 9100, ...) - config MACH_HERALD bool "HTC Herald" depends on ARCH_OMAP850 diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 8111cd9..b9c0ed3 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -408,7 +408,7 @@ config OMAP3_SDRC_AC_TIMING config OMAP4_ERRATA_I688 bool "OMAP4 errata: Async Bridge Corruption" - depends on ARCH_OMAP4 && !ARCH_MULTIPLATFORM + depends on (ARCH_OMAP4 || SOC_OMAP5) && !ARCH_MULTIPLATFORM select ARCH_HAS_BARRIERS help If a data is stalled inside asynchronous bridge because of back diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index a3e0aaa..cb0596b 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -166,7 +166,7 @@ static void __init sdp2430_display_init(void) omap_display_init(&sdp2430_dss_data); } -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91x_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) static struct omap_smc91x_platform_data board_smc91x_data = { .cs = 5, diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index ce812de..7eb9651 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -445,16 +445,23 @@ static void enable_board_wakeup_source(void) OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP); } +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 1, + .reset_gpio = 57, + .vcc_gpio = -EINVAL, + }, + { + .port = 2, + .reset_gpio = 61, + .vcc_gpio = -EINVAL, + }, +}; + static struct usbhs_omap_platform_data usbhs_bdata __initdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = 57, - .reset_gpio_port[1] = 61, - .reset_gpio_port[2] = -EINVAL }; #ifdef CONFIG_OMAP_MUX @@ -606,6 +613,8 @@ static void __init omap_3430sdp_init(void) board_flash_init(sdp_flash_partitions, chip_sel_3430, 0); sdp3430_display_init(); enable_board_wakeup_source(); + + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); } diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c index 67447bd..20d6d81 100644 --- a/arch/arm/mach-omap2/board-3630sdp.c +++ b/arch/arm/mach-omap2/board-3630sdp.c @@ -53,16 +53,23 @@ static void enable_board_wakeup_source(void) OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP); } +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 1, + .reset_gpio = 126, + .vcc_gpio = -EINVAL, + }, + { + .port = 2, + .reset_gpio = 61, + .vcc_gpio = -EINVAL, + }, +}; + static struct usbhs_omap_platform_data usbhs_bdata __initdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = 126, - .reset_gpio_port[1] = 61, - .reset_gpio_port[2] = -EINVAL }; #ifdef CONFIG_OMAP_MUX @@ -199,6 +206,8 @@ static void __init omap_sdp_init(void) board_smc91x_init(); board_flash_init(sdp_flash_partitions, chip_sel_sdp, NAND_BUSWIDTH_16); enable_board_wakeup_source(); + + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); } diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c index 7d3358b..fc53911 100644 --- a/arch/arm/mach-omap2/board-am3517crane.c +++ b/arch/arm/mach-omap2/board-am3517crane.c @@ -47,15 +47,17 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 1, + .reset_gpio = GPIO_USB_NRESET, + .vcc_gpio = GPIO_USB_POWER, + .vcc_polarity = 1, + }, +}; + static struct usbhs_omap_platform_data usbhs_bdata __initdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = GPIO_USB_NRESET, - .reset_gpio_port[1] = -EINVAL, - .reset_gpio_port[2] = -EINVAL }; static struct mtd_partition crane_nand_partitions[] = { @@ -131,13 +133,7 @@ static void __init am3517_crane_init(void) return; } - ret = gpio_request_one(GPIO_USB_POWER, GPIOF_OUT_INIT_HIGH, - "usb_ehci_enable"); - if (ret < 0) { - pr_err("Can not request GPIO %d\n", GPIO_USB_POWER); - return; - } - + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); am35xx_emac_init(AM35XX_DEFAULT_MDIO_FREQUENCY, 1); } diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 9fb8590..191f976 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -274,6 +274,14 @@ static __init void am3517_evm_mcbsp1_init(void) omap_ctrl_writel(devconf0, OMAP2_CONTROL_DEVCONF0); } +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 1, + .reset_gpio = 57, + .vcc_gpio = -EINVAL, + }, +}; + static struct usbhs_omap_platform_data usbhs_bdata __initdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, #if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \ @@ -282,12 +290,6 @@ static struct usbhs_omap_platform_data usbhs_bdata __initdata = { #else .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, #endif - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = 57, - .reset_gpio_port[1] = -EINVAL, - .reset_gpio_port[2] = -EINVAL }; #ifdef CONFIG_OMAP_MUX @@ -349,7 +351,6 @@ static struct omap2_hsmmc_info mmc[] = { {} /* Terminator */ }; - static void __init am3517_evm_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); @@ -361,6 +362,8 @@ static void __init am3517_evm_init(void) /* Configure GPIO for EHCI port */ omap_mux_init_gpio(57, OMAP_PIN_OUTPUT); + + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); am3517_evm_hecc_init(&am3517_evm_hecc_pdata); /* DSS */ diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index af2bb21..7fda3f5 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -419,15 +419,22 @@ static struct omap2_hsmmc_info mmc[] = { {} /* Terminator */ }; +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 1, + .reset_gpio = OMAP_MAX_GPIO_LINES + 6, + .vcc_gpio = -EINVAL, + }, + { + .port = 2, + .reset_gpio = OMAP_MAX_GPIO_LINES + 7, + .vcc_gpio = -EINVAL, + }, +}; + static struct usbhs_omap_platform_data usbhs_bdata __initdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = OMAP_MAX_GPIO_LINES + 6, - .reset_gpio_port[1] = OMAP_MAX_GPIO_LINES + 7, - .reset_gpio_port[2] = -EINVAL }; static void __init cm_t35_init_usbh(void) @@ -444,6 +451,7 @@ static void __init cm_t35_init_usbh(void) msleep(1); } + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); } diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index a66da80..4eb5e6f 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -188,15 +188,22 @@ static inline void cm_t3517_init_rtc(void) {} #define HSUSB2_RESET_GPIO (147) #define USB_HUB_RESET_GPIO (152) +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 1, + .reset_gpio = HSUSB1_RESET_GPIO, + .vcc_gpio = -EINVAL, + }, + { + .port = 2, + .reset_gpio = HSUSB2_RESET_GPIO, + .vcc_gpio = -EINVAL, + }, +}; + static struct usbhs_omap_platform_data cm_t3517_ehci_pdata __initdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = HSUSB1_RESET_GPIO, - .reset_gpio_port[1] = HSUSB2_RESET_GPIO, - .reset_gpio_port[2] = -EINVAL, }; static int __init cm_t3517_init_usbh(void) @@ -213,6 +220,7 @@ static int __init cm_t3517_init_usbh(void) msleep(1); } + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&cm_t3517_ehci_pdata); return 0; @@ -324,6 +332,6 @@ MACHINE_START(CM_T3517, "Compulab CM-T3517") .handle_irq = omap3_intc_handle_irq, .init_machine = cm_t3517_init, .init_late = am35xx_init_late, - .init_time = omap3_gp_gptimer_timer_init, + .init_time = omap3_gptimer_timer_init, .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 53056c3..42fbf1e 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -437,15 +437,7 @@ static struct platform_device *devkit8000_devices[] __initdata = { }; static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = -EINVAL, - .reset_gpio_port[2] = -EINVAL }; #ifdef CONFIG_OMAP_MUX diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index e54a480..78813b3 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -140,7 +140,7 @@ DT_MACHINE_START(AM33XX_DT, "Generic AM33XX (Flattened Device Tree)") .init_irq = omap_intc_of_init, .handle_irq = omap3_intc_handle_irq, .init_machine = omap_generic_init, - .init_time = omap3_am33xx_gptimer_timer_init, + .init_time = omap3_gptimer_timer_init, .dt_compat = am33xx_boards_compat, .restart = am33xx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index 812c829..5b4ec51 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -246,7 +246,7 @@ static u32 is_gpmc_muxed(void) return 0; } -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91x_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) static struct omap_smc91x_platform_data board_smc91x_data = { .cs = 1, diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index bf92678..95ccec0 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -527,26 +527,28 @@ static void __init igep_i2c_init(void) omap3_pmic_init("twl4030", &igep_twldata); } +static struct usbhs_phy_data igep2_phy_data[] __initdata = { + { + .port = 1, + .reset_gpio = IGEP2_GPIO_USBH_NRESET, + .vcc_gpio = -EINVAL, + }, +}; + +static struct usbhs_phy_data igep3_phy_data[] __initdata = { + { + .port = 2, + .reset_gpio = IGEP3_GPIO_USBH_NRESET, + .vcc_gpio = -EINVAL, + }, +}; + static struct usbhs_omap_platform_data igep2_usbhs_bdata __initdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = IGEP2_GPIO_USBH_NRESET, - .reset_gpio_port[1] = -EINVAL, - .reset_gpio_port[2] = -EINVAL, }; static struct usbhs_omap_platform_data igep3_usbhs_bdata __initdata = { - .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = IGEP3_GPIO_USBH_NRESET, - .reset_gpio_port[2] = -EINVAL, }; #ifdef CONFIG_OMAP_MUX @@ -642,8 +644,10 @@ static void __init igep_init(void) if (machine_is_igep0020()) { omap_display_init(&igep2_dss_data); igep2_init_smsc911x(); + usbhs_init_phys(igep2_phy_data, ARRAY_SIZE(igep2_phy_data)); usbhs_init(&igep2_usbhs_bdata); } else { + usbhs_init_phys(igep3_phy_data, ARRAY_SIZE(igep3_phy_data)); usbhs_init(&igep3_usbhs_bdata); } } diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index c3558f9..6955a42 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -33,6 +33,7 @@ #include <linux/mtd/nand.h> #include <linux/mmc/host.h> #include <linux/usb/phy.h> +#include <linux/usb/nop-usb-xceiv.h> #include <linux/regulator/machine.h> #include <linux/i2c/twl.h> @@ -277,6 +278,21 @@ static struct regulator_consumer_supply beagle_vsim_supply[] = { static struct gpio_led gpio_leds[]; +/* PHY's VCC regulator might be added later, so flag that we need it */ +static struct nop_usb_xceiv_platform_data hsusb2_phy_data = { + .needs_vcc = true, +}; + +static struct usbhs_phy_data phy_data[] = { + { + .port = 2, + .reset_gpio = 147, + .vcc_gpio = -1, /* updated in beagle_twl_gpio_setup */ + .vcc_polarity = 1, /* updated in beagle_twl_gpio_setup */ + .platform_data = &hsusb2_phy_data, + }, +}; + static int beagle_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { @@ -318,9 +334,11 @@ static int beagle_twl_gpio_setup(struct device *dev, } dvi_panel.power_down_gpio = beagle_config.dvi_pd_gpio; - gpio_request_one(gpio + TWL4030_GPIO_MAX, beagle_config.usb_pwr_level, - "nEN_USB_PWR"); + /* TWL4030_GPIO_MAX i.e. LED_GPO controls HS USB Port 2 power */ + phy_data[0].vcc_gpio = gpio + TWL4030_GPIO_MAX; + phy_data[0].vcc_polarity = beagle_config.usb_pwr_level; + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); return 0; } @@ -453,15 +471,7 @@ static struct platform_device *omap3_beagle_devices[] __initdata = { }; static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - - .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = 147, - .reset_gpio_port[2] = -EINVAL }; #ifdef CONFIG_OMAP_MUX @@ -479,7 +489,7 @@ static int __init beagle_opp_init(void) /* Initialize the omap3 opp table if not already created. */ r = omap3_opp_init(); - if (IS_ERR_VALUE(r) && (r != -EEXIST)) { + if (r < 0 && (r != -EEXIST)) { pr_err("%s: opp default init failed\n", __func__); return r; } @@ -543,7 +553,9 @@ static void __init omap3_beagle_init(void) usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(NULL); + usbhs_init(&usbhs_bdata); + board_nand_init(omap3beagle_nand_partitions, ARRAY_SIZE(omap3beagle_nand_partitions), NAND_CS, NAND_BUSWIDTH_16, NULL); diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 48789e0..2de92fa 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -496,7 +496,7 @@ struct wl12xx_platform_data omap3evm_wlan_data __initdata = { static struct regulator_consumer_supply omap3evm_vaux2_supplies[] = { REGULATOR_SUPPLY("VDD_CSIPHY1", "omap3isp"), /* OMAP ISP */ REGULATOR_SUPPLY("VDD_CSIPHY2", "omap3isp"), /* OMAP ISP */ - REGULATOR_SUPPLY("hsusb1", "ehci-omap.0"), + REGULATOR_SUPPLY("vcc", "nop_usb_xceiv.2"), /* hsusb port 2 */ REGULATOR_SUPPLY("vaux2", NULL), }; @@ -539,17 +539,16 @@ static int __init omap3_evm_i2c_init(void) return 0; } -static struct usbhs_omap_platform_data usbhs_bdata __initdata = { +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 2, + .reset_gpio = -1, /* set at runtime */ + .vcc_gpio = -EINVAL, + }, +}; - .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, +static struct usbhs_omap_platform_data usbhs_bdata __initdata = { .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - /* PHY reset GPIO will be runtime programmed based on EVM version */ - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = -EINVAL, - .reset_gpio_port[2] = -EINVAL }; #ifdef CONFIG_OMAP_MUX @@ -725,7 +724,7 @@ static void __init omap3_evm_init(void) /* setup EHCI phy reset config */ omap_mux_init_gpio(21, OMAP_PIN_INPUT_PULLUP); - usbhs_bdata.reset_gpio_port[1] = 21; + phy_data[0].reset_gpio = 21; /* EVM REV >= E can supply 500mA with EXTVBUS programming */ musb_board_data.power = 500; @@ -733,10 +732,12 @@ static void __init omap3_evm_init(void) } else { /* setup EHCI phy reset on MDC */ omap_mux_init_gpio(135, OMAP_PIN_OUTPUT); - usbhs_bdata.reset_gpio_port[1] = 135; + phy_data[0].reset_gpio = 135; } usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(&musb_board_data); + + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); board_nand_init(omap3evm_nand_partitions, ARRAY_SIZE(omap3evm_nand_partitions), NAND_CS, diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 2bba362..1004d2a 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -346,7 +346,7 @@ static struct regulator_consumer_supply pandora_vcc_lcd_supply[] = { }; static struct regulator_consumer_supply pandora_usb_phy_supply[] = { - REGULATOR_SUPPLY("hsusb1", "ehci-omap.0"), + REGULATOR_SUPPLY("vcc", "nop_usb_xceiv.2"), /* hsusb port 2 */ }; /* ads7846 on SPI and 2 nub controllers on I2C */ @@ -561,6 +561,14 @@ fail: printk(KERN_ERR "wl1251 board initialisation failed\n"); } +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 2, + .reset_gpio = 16, + .vcc_gpio = -EINVAL, + }, +}; + static struct platform_device *omap3pandora_devices[] __initdata = { &pandora_leds_gpio, &pandora_keys_gpio, @@ -569,15 +577,7 @@ static struct platform_device *omap3pandora_devices[] __initdata = { }; static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - - .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = 16, - .reset_gpio_port[2] = -EINVAL }; #ifdef CONFIG_OMAP_MUX @@ -601,7 +601,10 @@ static void __init omap3pandora_init(void) spi_register_board_info(omap3pandora_spi_board_info, ARRAY_SIZE(omap3pandora_spi_board_info)); omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 0, NULL); + + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); + usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(NULL); gpmc_nand_init(&pandora_nand_data, NULL); diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index 95c10b3..bf09564 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -358,19 +358,20 @@ static int __init omap3_stalker_i2c_init(void) #define OMAP3_STALKER_TS_GPIO 175 +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 2, + .reset_gpio = 21, + .vcc_gpio = -EINVAL, + }, +}; + static struct platform_device *omap3_stalker_devices[] __initdata = { &keys_gpio, }; static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = 21, - .reset_gpio_port[2] = -EINVAL, }; #ifdef CONFIG_OMAP_MUX @@ -407,6 +408,8 @@ static void __init omap3_stalker_init(void) omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL); usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(NULL); + + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); omap_ads7846_init(1, OMAP3_STALKER_TS_GPIO, 310, NULL); diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index bcd44fb..7da48bc 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -305,21 +305,22 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 2, + .reset_gpio = 147, + .vcc_gpio = -EINVAL, + }, +}; + static struct platform_device *omap3_touchbook_devices[] __initdata = { &leds_gpio, &keys_gpio, }; static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = 147, - .reset_gpio_port[2] = -EINVAL }; static void omap3_touchbook_poweroff(void) @@ -368,6 +369,8 @@ static void __init omap3_touchbook_init(void) omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata); usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(NULL); + + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); board_nand_init(omap3touchbook_nand_partitions, ARRAY_SIZE(omap3touchbook_nand_partitions), NAND_CS, diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index b02c2f0..a71ad34 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -31,6 +31,7 @@ #include <linux/ti_wilink_st.h> #include <linux/usb/musb.h> #include <linux/usb/phy.h> +#include <linux/usb/nop-usb-xceiv.h> #include <linux/wl12xx.h> #include <linux/irqchip/arm-gic.h> #include <linux/platform_data/omap-abe-twl6040.h> @@ -132,6 +133,22 @@ static struct platform_device btwilink_device = { .id = -1, }; +/* PHY device on HS USB Port 1 i.e. nop_usb_xceiv.1 */ +static struct nop_usb_xceiv_platform_data hsusb1_phy_data = { + /* FREF_CLK3 provides the 19.2 MHz reference clock to the PHY */ + .clk_rate = 19200000, +}; + +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 1, + .reset_gpio = GPIO_HUB_NRESET, + .vcc_gpio = GPIO_HUB_POWER, + .vcc_polarity = 1, + .platform_data = &hsusb1_phy_data, + }, +}; + static struct platform_device *panda_devices[] __initdata = { &leds_gpio, &wl1271_device, @@ -142,49 +159,19 @@ static struct platform_device *panda_devices[] __initdata = { static struct usbhs_omap_platform_data usbhs_bdata __initdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - .phy_reset = false, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = -EINVAL, - .reset_gpio_port[2] = -EINVAL -}; - -static struct gpio panda_ehci_gpios[] __initdata = { - { GPIO_HUB_POWER, GPIOF_OUT_INIT_LOW, "hub_power" }, - { GPIO_HUB_NRESET, GPIOF_OUT_INIT_LOW, "hub_nreset" }, }; static void __init omap4_ehci_init(void) { int ret; - struct clk *phy_ref_clk; /* FREF_CLK3 provides the 19.2 MHz reference clock to the PHY */ - phy_ref_clk = clk_get(NULL, "auxclk3_ck"); - if (IS_ERR(phy_ref_clk)) { - pr_err("Cannot request auxclk3\n"); - return; - } - clk_set_rate(phy_ref_clk, 19200000); - clk_prepare_enable(phy_ref_clk); - - /* disable the power to the usb hub prior to init and reset phy+hub */ - ret = gpio_request_array(panda_ehci_gpios, - ARRAY_SIZE(panda_ehci_gpios)); - if (ret) { - pr_err("Unable to initialize EHCI power/reset\n"); - return; - } - - gpio_export(GPIO_HUB_POWER, 0); - gpio_export(GPIO_HUB_NRESET, 0); - gpio_set_value(GPIO_HUB_NRESET, 1); + ret = clk_add_alias("main_clk", "nop_usb_xceiv.1", "auxclk3_ck", NULL); + if (ret) + pr_err("Failed to add main_clk alias to auxclk3_ck\n"); + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); - - /* enable power to hub */ - gpio_set_value(GPIO_HUB_POWER, 1); } static struct omap_musb_board_data musb_board_data = { diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 86bab51..ab79a44 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -458,14 +458,16 @@ static int __init overo_spi_init(void) return 0; } +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 2, + .reset_gpio = OVERO_GPIO_USBH_NRESET, + .vcc_gpio = -EINVAL, + }, +}; + static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - .phy_reset = true, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = OVERO_GPIO_USBH_NRESET, - .reset_gpio_port[2] = -EINVAL }; #ifdef CONFIG_OMAP_MUX @@ -502,6 +504,8 @@ static void __init overo_init(void) ARRAY_SIZE(overo_nand_partitions), NAND_CS, 0, NULL); usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(NULL); + + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); overo_spi_init(); overo_init_smsc911x(); diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c index 5e4d4c9..1a3dd86 100644 --- a/arch/arm/mach-omap2/board-zoom.c +++ b/arch/arm/mach-omap2/board-zoom.c @@ -92,14 +92,16 @@ static struct mtd_partition zoom_nand_partitions[] = { }, }; +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 2, + .reset_gpio = ZOOM3_EHCI_RESET_GPIO, + .vcc_gpio = -EINVAL, + }, +}; + static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - .phy_reset = true, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = ZOOM3_EHCI_RESET_GPIO, - .reset_gpio_port[2] = -EINVAL, }; static void __init omap_zoom_init(void) @@ -109,6 +111,8 @@ static void __init omap_zoom_init(void) } else if (machine_is_omap_zoom3()) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBP); omap_mux_init_gpio(ZOOM3_EHCI_RESET_GPIO, OMAP_PIN_OUTPUT); + + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); } diff --git a/arch/arm/mach-omap2/cclock33xx_data.c b/arch/arm/mach-omap2/cclock33xx_data.c index 476b820..7f091c8 100644 --- a/arch/arm/mach-omap2/cclock33xx_data.c +++ b/arch/arm/mach-omap2/cclock33xx_data.c @@ -958,6 +958,14 @@ int __init am33xx_clk_init(void) clk_set_parent(&timer3_fck, &sys_clkin_ck); clk_set_parent(&timer6_fck, &sys_clkin_ck); + /* + * The On-Chip 32K RC Osc clock is not an accurate clock-source as per + * the design/spec, so as a result, for example, timer which supposed + * to get expired @60Sec, but will expire somewhere ~@40Sec, which is + * not expected by any use-case, so change WDT1 clock source to PRCM + * 32KHz clock. + */ + clk_set_parent(&wdt1_fck, &clkdiv32k_ick); return 0; } diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index e4ec3a6..2191f25 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -596,7 +596,7 @@ int __init omap2_clk_switch_mpurate_at_boot(const char *mpurate_ck_name) return -ENOENT; r = clk_set_rate(mpurate_ck, mpurate); - if (IS_ERR_VALUE(r)) { + if (r < 0) { WARN(1, "clock: %s: unable to set MPU rate to %d: %d\n", mpurate_ck_name, mpurate, r); clk_put(mpurate_ck); diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index 40f4a03..bf70e2b 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -82,8 +82,7 @@ extern void omap2_init_common_infrastructure(void); extern void omap2_sync32k_timer_init(void); extern void omap3_sync32k_timer_init(void); extern void omap3_secure_sync32k_timer_init(void); -extern void omap3_gp_gptimer_timer_init(void); -extern void omap3_am33xx_gptimer_timer_init(void); +extern void omap3_gptimer_timer_init(void); extern void omap4_local_timer_init(void); extern void omap5_realtime_timer_init(void); diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c index 3aed4b0..3a0296c 100644 --- a/arch/arm/mach-omap2/dpll3xxx.c +++ b/arch/arm/mach-omap2/dpll3xxx.c @@ -307,10 +307,10 @@ static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel) _omap3_noncore_dpll_bypass(clk); /* - * Set jitter correction. No jitter correction for OMAP4 and 3630 - * since freqsel field is no longer present + * Set jitter correction. Jitter correction applicable for OMAP343X + * only since freqsel field is no longer present on other devices. */ - if (!soc_is_am33xx() && !cpu_is_omap44xx() && !cpu_is_omap3630()) { + if (cpu_is_omap343x()) { v = __raw_readl(dd->control_reg); v &= ~dd->freqsel_mask; v |= freqsel << __ffs(dd->freqsel_mask); @@ -480,29 +480,30 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate, if (!dd) return -EINVAL; - __clk_prepare(dd->clk_bypass); - clk_enable(dd->clk_bypass); - __clk_prepare(dd->clk_ref); - clk_enable(dd->clk_ref); - if (__clk_get_rate(dd->clk_bypass) == rate && (dd->modes & (1 << DPLL_LOW_POWER_BYPASS))) { pr_debug("%s: %s: set rate: entering bypass.\n", __func__, __clk_get_name(hw->clk)); + __clk_prepare(dd->clk_bypass); + clk_enable(dd->clk_bypass); ret = _omap3_noncore_dpll_bypass(clk); if (!ret) new_parent = dd->clk_bypass; + clk_disable(dd->clk_bypass); + __clk_unprepare(dd->clk_bypass); } else { + __clk_prepare(dd->clk_ref); + clk_enable(dd->clk_ref); + if (dd->last_rounded_rate != rate) rate = __clk_round_rate(hw->clk, rate); if (dd->last_rounded_rate == 0) return -EINVAL; - /* No freqsel on AM335x, OMAP4 and OMAP3630 */ - if (!soc_is_am33xx() && !cpu_is_omap44xx() && - !cpu_is_omap3630()) { + /* Freqsel is available only on OMAP343X devices */ + if (cpu_is_omap343x()) { freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n); WARN_ON(!freqsel); @@ -514,6 +515,8 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate, ret = omap3_noncore_dpll_program(clk, freqsel); if (!ret) new_parent = dd->clk_ref; + clk_disable(dd->clk_ref); + __clk_unprepare(dd->clk_ref); } /* * FIXME - this is all wrong. common code handles reparenting and @@ -525,11 +528,6 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate, if (!ret) __clk_reparent(hw->clk, new_parent); - clk_disable(dd->clk_ref); - __clk_unprepare(dd->clk_ref); - clk_disable(dd->clk_bypass); - __clk_unprepare(dd->clk_bypass); - return 0; } diff --git a/arch/arm/mach-omap2/dsp.c b/arch/arm/mach-omap2/dsp.c index b155500..b8208b4 100644 --- a/arch/arm/mach-omap2/dsp.c +++ b/arch/arm/mach-omap2/dsp.c @@ -26,7 +26,7 @@ #include "control.h" #include "cm2xxx_3xxx.h" #include "prm2xxx_3xxx.h" -#ifdef CONFIG_BRIDGE_DVFS +#ifdef CONFIG_TIDSPBRIDGE_DVFS #include "omap-pm.h" #endif @@ -35,7 +35,7 @@ static struct platform_device *omap_dsp_pdev; static struct omap_dsp_platform_data omap_dsp_pdata __initdata = { -#ifdef CONFIG_BRIDGE_DVFS +#ifdef CONFIG_TIDSPBRIDGE_DVFS .dsp_set_min_opp = omap_pm_dsp_set_min_opp, .dsp_get_opp = omap_pm_dsp_get_opp, .cpu_set_freq = omap_pm_cpu_set_freq, diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c index afc1e8c..d9c2719 100644 --- a/arch/arm/mach-omap2/gpmc-nand.c +++ b/arch/arm/mach-omap2/gpmc-nand.c @@ -74,14 +74,6 @@ static int omap2_nand_gpmc_retime( t.cs_wr_off = gpmc_t->cs_wr_off; t.wr_cycle = gpmc_t->wr_cycle; - /* Configure GPMC */ - if (gpmc_nand_data->devsize == NAND_BUSWIDTH_16) - gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_DEV_SIZE, 1); - else - gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_DEV_SIZE, 0); - gpmc_cs_configure(gpmc_nand_data->cs, - GPMC_CONFIG_DEV_TYPE, GPMC_DEVICETYPE_NAND); - gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_WP, 0); err = gpmc_cs_set_timings(gpmc_nand_data->cs, &t); if (err) return err; @@ -115,14 +107,18 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data, struct gpmc_timings *gpmc_t) { int err = 0; + struct gpmc_settings s; struct device *dev = &gpmc_nand_device.dev; + memset(&s, 0, sizeof(struct gpmc_settings)); + gpmc_nand_device.dev.platform_data = gpmc_nand_data; err = gpmc_cs_request(gpmc_nand_data->cs, NAND_IO_SIZE, (unsigned long *)&gpmc_nand_resource[0].start); if (err < 0) { - dev_err(dev, "Cannot request GPMC CS\n"); + dev_err(dev, "Cannot request GPMC CS %d, error %d\n", + gpmc_nand_data->cs, err); return err; } @@ -140,11 +136,31 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data, dev_err(dev, "Unable to set gpmc timings: %d\n", err); return err; } - } - /* Enable RD PIN Monitoring Reg */ - if (gpmc_nand_data->dev_ready) { - gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_RDY_BSY, 1); + if (gpmc_nand_data->of_node) { + gpmc_read_settings_dt(gpmc_nand_data->of_node, &s); + } else { + s.device_nand = true; + + /* Enable RD PIN Monitoring Reg */ + if (gpmc_nand_data->dev_ready) { + s.wait_on_read = true; + s.wait_on_write = true; + } + } + + if (gpmc_nand_data->devsize == NAND_BUSWIDTH_16) + s.device_width = GPMC_DEVWIDTH_16BIT; + else + s.device_width = GPMC_DEVWIDTH_8BIT; + + err = gpmc_cs_program_settings(gpmc_nand_data->cs, &s); + if (err < 0) + goto out_free_cs; + + err = gpmc_configure(GPMC_CONFIG_WP, 0); + if (err < 0) + goto out_free_cs; } gpmc_update_nand_reg(&gpmc_nand_data->reg, gpmc_nand_data->cs); diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c index fadd8743..64b5a83 100644 --- a/arch/arm/mach-omap2/gpmc-onenand.c +++ b/arch/arm/mach-omap2/gpmc-onenand.c @@ -47,11 +47,23 @@ static struct platform_device gpmc_onenand_device = { .resource = &gpmc_onenand_resource, }; -static struct gpmc_timings omap2_onenand_calc_async_timings(void) +static struct gpmc_settings onenand_async = { + .device_width = GPMC_DEVWIDTH_16BIT, + .mux_add_data = GPMC_MUX_AD, +}; + +static struct gpmc_settings onenand_sync = { + .burst_read = true, + .burst_wrap = true, + .burst_len = GPMC_BURST_16, + .device_width = GPMC_DEVWIDTH_16BIT, + .mux_add_data = GPMC_MUX_AD, + .wait_pin = 0, +}; + +static void omap2_onenand_calc_async_timings(struct gpmc_timings *t) { struct gpmc_device_timings dev_t; - struct gpmc_timings t; - const int t_cer = 15; const int t_avdp = 12; const int t_aavdh = 7; @@ -64,7 +76,6 @@ static struct gpmc_timings omap2_onenand_calc_async_timings(void) memset(&dev_t, 0, sizeof(dev_t)); - dev_t.mux = true; dev_t.t_avdp_r = max_t(int, t_avdp, t_cer) * 1000; dev_t.t_avdp_w = dev_t.t_avdp_r; dev_t.t_aavdh = t_aavdh * 1000; @@ -76,19 +87,7 @@ static struct gpmc_timings omap2_onenand_calc_async_timings(void) dev_t.t_wpl = t_wpl * 1000; dev_t.t_wph = t_wph * 1000; - gpmc_calc_timings(&t, &dev_t); - - return t; -} - -static int gpmc_set_async_mode(int cs, struct gpmc_timings *t) -{ - /* Configure GPMC for asynchronous read */ - gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, - GPMC_CONFIG1_DEVICESIZE_16 | - GPMC_CONFIG1_MUXADDDATA); - - return gpmc_cs_set_timings(cs, t); + gpmc_calc_timings(t, &onenand_async, &dev_t); } static void omap2_onenand_set_async_mode(void __iomem *onenand_base) @@ -158,12 +157,11 @@ static int omap2_onenand_get_freq(struct omap_onenand_platform_data *cfg, return freq; } -static struct gpmc_timings -omap2_onenand_calc_sync_timings(struct omap_onenand_platform_data *cfg, - int freq) +static void omap2_onenand_calc_sync_timings(struct gpmc_timings *t, + unsigned int flags, + int freq) { struct gpmc_device_timings dev_t; - struct gpmc_timings t; const int t_cer = 15; const int t_avdp = 12; const int t_cez = 20; /* max of t_cez, t_oez */ @@ -172,9 +170,9 @@ omap2_onenand_calc_sync_timings(struct omap_onenand_platform_data *cfg, int min_gpmc_clk_period, t_ces, t_avds, t_avdh, t_ach, t_aavdh, t_rdyo; int div, gpmc_clk_ns; - if (cfg->flags & ONENAND_SYNC_READ) + if (flags & ONENAND_SYNC_READ) onenand_flags = ONENAND_FLAG_SYNCREAD; - else if (cfg->flags & ONENAND_SYNC_READWRITE) + else if (flags & ONENAND_SYNC_READWRITE) onenand_flags = ONENAND_FLAG_SYNCREAD | ONENAND_FLAG_SYNCWRITE; switch (freq) { @@ -239,10 +237,11 @@ omap2_onenand_calc_sync_timings(struct omap_onenand_platform_data *cfg, /* Set synchronous read timings */ memset(&dev_t, 0, sizeof(dev_t)); - dev_t.mux = true; - dev_t.sync_read = true; + if (onenand_flags & ONENAND_FLAG_SYNCREAD) + onenand_sync.sync_read = true; if (onenand_flags & ONENAND_FLAG_SYNCWRITE) { - dev_t.sync_write = true; + onenand_sync.sync_write = true; + onenand_sync.burst_write = true; } else { dev_t.t_avdp_w = max(t_avdp, t_cer) * 1000; dev_t.t_wpl = t_wpl * 1000; @@ -265,32 +264,7 @@ omap2_onenand_calc_sync_timings(struct omap_onenand_platform_data *cfg, dev_t.cyc_aavdh_oe = 1; dev_t.t_rdyo = t_rdyo * 1000 + min_gpmc_clk_period; - gpmc_calc_timings(&t, &dev_t); - - return t; -} - -static int gpmc_set_sync_mode(int cs, struct gpmc_timings *t) -{ - unsigned sync_read = onenand_flags & ONENAND_FLAG_SYNCREAD; - unsigned sync_write = onenand_flags & ONENAND_FLAG_SYNCWRITE; - - /* Configure GPMC for synchronous read */ - gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, - GPMC_CONFIG1_WRAPBURST_SUPP | - GPMC_CONFIG1_READMULTIPLE_SUPP | - (sync_read ? GPMC_CONFIG1_READTYPE_SYNC : 0) | - (sync_write ? GPMC_CONFIG1_WRITEMULTIPLE_SUPP : 0) | - (sync_write ? GPMC_CONFIG1_WRITETYPE_SYNC : 0) | - GPMC_CONFIG1_PAGE_LEN(2) | - (cpu_is_omap34xx() ? 0 : - (GPMC_CONFIG1_WAIT_READ_MON | - GPMC_CONFIG1_WAIT_PIN_SEL(0))) | - GPMC_CONFIG1_DEVICESIZE_16 | - GPMC_CONFIG1_DEVICETYPE_NOR | - GPMC_CONFIG1_MUXADDDATA); - - return gpmc_cs_set_timings(cs, t); + gpmc_calc_timings(t, &onenand_sync, &dev_t); } static int omap2_onenand_setup_async(void __iomem *onenand_base) @@ -298,12 +272,20 @@ static int omap2_onenand_setup_async(void __iomem *onenand_base) struct gpmc_timings t; int ret; + if (gpmc_onenand_data->of_node) + gpmc_read_settings_dt(gpmc_onenand_data->of_node, + &onenand_async); + omap2_onenand_set_async_mode(onenand_base); - t = omap2_onenand_calc_async_timings(); + omap2_onenand_calc_async_timings(&t); + + ret = gpmc_cs_program_settings(gpmc_onenand_data->cs, &onenand_async); + if (ret < 0) + return ret; - ret = gpmc_set_async_mode(gpmc_onenand_data->cs, &t); - if (IS_ERR_VALUE(ret)) + ret = gpmc_cs_set_timings(gpmc_onenand_data->cs, &t); + if (ret < 0) return ret; omap2_onenand_set_async_mode(onenand_base); @@ -322,10 +304,26 @@ static int omap2_onenand_setup_sync(void __iomem *onenand_base, int *freq_ptr) set_onenand_cfg(onenand_base); } - t = omap2_onenand_calc_sync_timings(gpmc_onenand_data, freq); + if (gpmc_onenand_data->of_node) { + gpmc_read_settings_dt(gpmc_onenand_data->of_node, + &onenand_sync); + } else { + /* + * FIXME: Appears to be legacy code from initial ONENAND commit. + * Unclear what boards this is for and if this can be removed. + */ + if (!cpu_is_omap34xx()) + onenand_sync.wait_on_read = true; + } + + omap2_onenand_calc_sync_timings(&t, gpmc_onenand_data->flags, freq); - ret = gpmc_set_sync_mode(gpmc_onenand_data->cs, &t); - if (IS_ERR_VALUE(ret)) + ret = gpmc_cs_program_settings(gpmc_onenand_data->cs, &onenand_sync); + if (ret < 0) + return ret; + + ret = gpmc_cs_set_timings(gpmc_onenand_data->cs, &t); + if (ret < 0) return ret; set_onenand_cfg(onenand_base); @@ -359,6 +357,7 @@ static int gpmc_onenand_setup(void __iomem *onenand_base, int *freq_ptr) void gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data) { int err; + struct device *dev = &gpmc_onenand_device.dev; gpmc_onenand_data = _onenand_data; gpmc_onenand_data->onenand_setup = gpmc_onenand_setup; @@ -366,7 +365,7 @@ void gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data) if (cpu_is_omap24xx() && (gpmc_onenand_data->flags & ONENAND_SYNC_READWRITE)) { - printk(KERN_ERR "Onenand using only SYNC_READ on 24xx\n"); + dev_warn(dev, "OneNAND using only SYNC_READ on 24xx\n"); gpmc_onenand_data->flags &= ~ONENAND_SYNC_READWRITE; gpmc_onenand_data->flags |= ONENAND_SYNC_READ; } @@ -379,7 +378,8 @@ void gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data) err = gpmc_cs_request(gpmc_onenand_data->cs, ONENAND_IO_SIZE, (unsigned long *)&gpmc_onenand_resource.start); if (err < 0) { - pr_err("%s: Cannot request GPMC CS\n", __func__); + dev_err(dev, "Cannot request GPMC CS %d, error %d\n", + gpmc_onenand_data->cs, err); return; } @@ -387,7 +387,7 @@ void gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data) ONENAND_IO_SIZE - 1; if (platform_device_register(&gpmc_onenand_device) < 0) { - pr_err("%s: Unable to register OneNAND device\n", __func__); + dev_err(dev, "Unable to register OneNAND device\n"); gpmc_cs_free(gpmc_onenand_data->cs); return; } diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c index 11d0b75..61a0635 100644 --- a/arch/arm/mach-omap2/gpmc-smc91x.c +++ b/arch/arm/mach-omap2/gpmc-smc91x.c @@ -49,6 +49,10 @@ static struct platform_device gpmc_smc91x_device = { .resource = gpmc_smc91x_resources, }; +static struct gpmc_settings smc91x_settings = { + .device_width = GPMC_DEVWIDTH_16BIT, +}; + /* * Set the gpmc timings for smc91c96. The timings are taken * from the data sheet available at: @@ -67,18 +71,6 @@ static int smc91c96_gpmc_retime(void) const int t7 = 5; /* Figure 12.4 write */ const int t8 = 5; /* Figure 12.4 write */ const int t20 = 185; /* Figure 12.2 read and 12.4 write */ - u32 l; - - l = GPMC_CONFIG1_DEVICESIZE_16; - if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA) - l |= GPMC_CONFIG1_MUXADDDATA; - if (gpmc_cfg->flags & GPMC_READ_MON) - l |= GPMC_CONFIG1_WAIT_READ_MON; - if (gpmc_cfg->flags & GPMC_WRITE_MON) - l |= GPMC_CONFIG1_WAIT_WRITE_MON; - if (gpmc_cfg->wait_pin) - l |= GPMC_CONFIG1_WAIT_PIN_SEL(gpmc_cfg->wait_pin); - gpmc_cs_write_reg(gpmc_cfg->cs, GPMC_CS_CONFIG1, l); /* * FIXME: Calculate the address and data bus muxed timings. @@ -104,7 +96,7 @@ static int smc91c96_gpmc_retime(void) dev_t.t_cez_w = t4_w * 1000; dev_t.t_wr_cycle = (t20 - t3) * 1000; - gpmc_calc_timings(&t, &dev_t); + gpmc_calc_timings(&t, &smc91x_settings, &dev_t); return gpmc_cs_set_timings(gpmc_cfg->cs, &t); } @@ -133,6 +125,18 @@ void __init gpmc_smc91x_init(struct omap_smc91x_platform_data *board_data) gpmc_smc91x_resources[0].end = cs_mem_base + 0x30f; gpmc_smc91x_resources[1].flags |= (gpmc_cfg->flags & IRQF_TRIGGER_MASK); + if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA) + smc91x_settings.mux_add_data = GPMC_MUX_AD; + if (gpmc_cfg->flags & GPMC_READ_MON) + smc91x_settings.wait_on_read = true; + if (gpmc_cfg->flags & GPMC_WRITE_MON) + smc91x_settings.wait_on_write = true; + if (gpmc_cfg->wait_pin) + smc91x_settings.wait_pin = gpmc_cfg->wait_pin; + ret = gpmc_cs_program_settings(gpmc_cfg->cs, &smc91x_settings); + if (ret < 0) + goto free1; + if (gpmc_cfg->retime) { ret = gpmc_cfg->retime(); if (ret != 0) diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 410e1ba..ed946df 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -26,6 +26,7 @@ #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/of.h> +#include <linux/of_address.h> #include <linux/of_mtd.h> #include <linux/of_device.h> #include <linux/mtd/nand.h> @@ -91,9 +92,7 @@ #define GPMC_CS_SIZE 0x30 #define GPMC_BCH_SIZE 0x10 -#define GPMC_MEM_START 0x00000000 #define GPMC_MEM_END 0x3FFFFFFF -#define BOOT_ROM_SPACE 0x100000 /* 1MB */ #define GPMC_CHUNK_SHIFT 24 /* 16 MB */ #define GPMC_SECTION_SHIFT 28 /* 128 MB */ @@ -107,6 +106,9 @@ #define GPMC_HAS_WR_ACCESS 0x1 #define GPMC_HAS_WR_DATA_MUX_BUS 0x2 +#define GPMC_HAS_MUX_AAD 0x4 + +#define GPMC_NR_WAITPINS 4 /* XXX: Only NAND irq has been considered,currently these are the only ones used */ @@ -153,6 +155,7 @@ static struct resource gpmc_cs_mem[GPMC_CS_NUM]; static DEFINE_SPINLOCK(gpmc_mem_lock); /* Define chip-selects as reserved by default until probe completes */ static unsigned int gpmc_cs_map = ((1 << GPMC_CS_NUM) - 1); +static unsigned int gpmc_nr_waitpins; static struct device *gpmc_dev; static int gpmc_irq; static resource_size_t phys_base, mem_size; @@ -181,7 +184,7 @@ void gpmc_cs_write_reg(int cs, int idx, u32 val) __raw_writel(val, reg_addr); } -u32 gpmc_cs_read_reg(int cs, int idx) +static u32 gpmc_cs_read_reg(int cs, int idx) { void __iomem *reg_addr; @@ -190,7 +193,7 @@ u32 gpmc_cs_read_reg(int cs, int idx) } /* TODO: Add support for gpmc_fck to clock framework and use it */ -unsigned long gpmc_get_fclk_period(void) +static unsigned long gpmc_get_fclk_period(void) { unsigned long rate = clk_get_rate(gpmc_l3_clk); @@ -205,7 +208,7 @@ unsigned long gpmc_get_fclk_period(void) return rate; } -unsigned int gpmc_ns_to_ticks(unsigned int time_ns) +static unsigned int gpmc_ns_to_ticks(unsigned int time_ns) { unsigned long tick_ps; @@ -215,7 +218,7 @@ unsigned int gpmc_ns_to_ticks(unsigned int time_ns) return (time_ns * 1000 + tick_ps - 1) / tick_ps; } -unsigned int gpmc_ps_to_ticks(unsigned int time_ps) +static unsigned int gpmc_ps_to_ticks(unsigned int time_ps) { unsigned long tick_ps; @@ -230,13 +233,6 @@ unsigned int gpmc_ticks_to_ns(unsigned int ticks) return ticks * gpmc_get_fclk_period() / 1000; } -unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns) -{ - unsigned long ticks = gpmc_ns_to_ticks(time_ns); - - return ticks * gpmc_get_fclk_period() / 1000; -} - static unsigned int gpmc_ticks_to_ps(unsigned int ticks) { return ticks * gpmc_get_fclk_period(); @@ -405,11 +401,18 @@ int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t) return 0; } -static void gpmc_cs_enable_mem(int cs, u32 base, u32 size) +static int gpmc_cs_enable_mem(int cs, u32 base, u32 size) { u32 l; u32 mask; + /* + * Ensure that base address is aligned on a + * boundary equal to or greater than size. + */ + if (base & (size - 1)) + return -EINVAL; + mask = (1 << GPMC_SECTION_SHIFT) - size; l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7); l &= ~0x3f; @@ -418,6 +421,8 @@ static void gpmc_cs_enable_mem(int cs, u32 base, u32 size) l |= ((mask >> GPMC_CHUNK_SHIFT) & 0x0f) << 8; l |= GPMC_CONFIG7_CSVALID; gpmc_cs_write_reg(cs, GPMC_CS_CONFIG7, l); + + return 0; } static void gpmc_cs_disable_mem(int cs) @@ -448,22 +453,14 @@ static int gpmc_cs_mem_enabled(int cs) return l & GPMC_CONFIG7_CSVALID; } -int gpmc_cs_set_reserved(int cs, int reserved) +static void gpmc_cs_set_reserved(int cs, int reserved) { - if (cs > GPMC_CS_NUM) - return -ENODEV; - gpmc_cs_map &= ~(1 << cs); gpmc_cs_map |= (reserved ? 1 : 0) << cs; - - return 0; } -int gpmc_cs_reserved(int cs) +static bool gpmc_cs_reserved(int cs) { - if (cs > GPMC_CS_NUM) - return -ENODEV; - return gpmc_cs_map & (1 << cs); } @@ -510,6 +507,39 @@ static int gpmc_cs_delete_mem(int cs) return r; } +/** + * gpmc_cs_remap - remaps a chip-select physical base address + * @cs: chip-select to remap + * @base: physical base address to re-map chip-select to + * + * Re-maps a chip-select to a new physical base address specified by + * "base". Returns 0 on success and appropriate negative error code + * on failure. + */ +static int gpmc_cs_remap(int cs, u32 base) +{ + int ret; + u32 old_base, size; + + if (cs > GPMC_CS_NUM) + return -ENODEV; + gpmc_cs_get_memconf(cs, &old_base, &size); + if (base == old_base) + return 0; + gpmc_cs_disable_mem(cs); + ret = gpmc_cs_delete_mem(cs); + if (ret < 0) + return ret; + ret = gpmc_cs_insert_mem(cs, base, size); + if (ret < 0) + return ret; + ret = gpmc_cs_enable_mem(cs, base, size); + if (ret < 0) + return ret; + + return 0; +} + int gpmc_cs_request(int cs, unsigned long size, unsigned long *base) { struct resource *res = &gpmc_cs_mem[cs]; @@ -535,7 +565,12 @@ int gpmc_cs_request(int cs, unsigned long size, unsigned long *base) if (r < 0) goto out; - gpmc_cs_enable_mem(cs, res->start, resource_size(res)); + r = gpmc_cs_enable_mem(cs, res->start, resource_size(res)); + if (r < 0) { + release_resource(res); + goto out; + } + *base = res->start; gpmc_cs_set_reserved(cs, 1); out: @@ -561,16 +596,14 @@ void gpmc_cs_free(int cs) EXPORT_SYMBOL(gpmc_cs_free); /** - * gpmc_cs_configure - write request to configure gpmc - * @cs: chip select number + * gpmc_configure - write request to configure gpmc * @cmd: command type * @wval: value to write * @return status of the operation */ -int gpmc_cs_configure(int cs, int cmd, int wval) +int gpmc_configure(int cmd, int wval) { - int err = 0; - u32 regval = 0; + u32 regval; switch (cmd) { case GPMC_ENABLE_IRQ: @@ -590,43 +623,14 @@ int gpmc_cs_configure(int cs, int cmd, int wval) gpmc_write_reg(GPMC_CONFIG, regval); break; - case GPMC_CONFIG_RDY_BSY: - regval = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); - if (wval) - regval |= WR_RD_PIN_MONITORING; - else - regval &= ~WR_RD_PIN_MONITORING; - gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval); - break; - - case GPMC_CONFIG_DEV_SIZE: - regval = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); - - /* clear 2 target bits */ - regval &= ~GPMC_CONFIG1_DEVICESIZE(3); - - /* set the proper value */ - regval |= GPMC_CONFIG1_DEVICESIZE(wval); - - gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval); - break; - - case GPMC_CONFIG_DEV_TYPE: - regval = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); - regval |= GPMC_CONFIG1_DEVICETYPE(wval); - if (wval == GPMC_DEVICETYPE_NOR) - regval |= GPMC_CONFIG1_MUXADDDATA; - gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval); - break; - default: - printk(KERN_ERR "gpmc_configure_cs: Not supported\n"); - err = -EINVAL; + pr_err("%s: command not supported\n", __func__); + return -EINVAL; } - return err; + return 0; } -EXPORT_SYMBOL(gpmc_cs_configure); +EXPORT_SYMBOL(gpmc_configure); void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs) { @@ -716,7 +720,7 @@ static int gpmc_setup_irq(void) return -EINVAL; gpmc_irq_start = irq_alloc_descs(-1, 0, GPMC_NR_IRQ, 0); - if (IS_ERR_VALUE(gpmc_irq_start)) { + if (gpmc_irq_start < 0) { pr_err("irq_alloc_descs failed\n"); return gpmc_irq_start; } @@ -781,16 +785,16 @@ static void gpmc_mem_exit(void) } -static int gpmc_mem_init(void) +static void gpmc_mem_init(void) { - int cs, rc; - unsigned long boot_rom_space = 0; + int cs; - /* never allocate the first page, to facilitate bug detection; - * even if we didn't boot from ROM. + /* + * The first 1MB of GPMC address space is typically mapped to + * the internal ROM. Never allocate the first page, to + * facilitate bug detection; even if we didn't boot from ROM. */ - boot_rom_space = BOOT_ROM_SPACE; - gpmc_mem_root.start = GPMC_MEM_START + boot_rom_space; + gpmc_mem_root.start = SZ_1M; gpmc_mem_root.end = GPMC_MEM_END; /* Reserve all regions that has been set up by bootloader */ @@ -800,16 +804,12 @@ static int gpmc_mem_init(void) if (!gpmc_cs_mem_enabled(cs)) continue; gpmc_cs_get_memconf(cs, &base, &size); - rc = gpmc_cs_insert_mem(cs, base, size); - if (IS_ERR_VALUE(rc)) { - while (--cs >= 0) - if (gpmc_cs_mem_enabled(cs)) - gpmc_cs_delete_mem(cs); - return rc; + if (gpmc_cs_insert_mem(cs, base, size)) { + pr_warn("%s: disabling cs %d mapped at 0x%x-0x%x\n", + __func__, cs, base, base + size); + gpmc_cs_disable_mem(cs); } } - - return 0; } static u32 gpmc_round_ps_to_sync_clk(u32 time_ps, u32 sync_clk) @@ -825,9 +825,9 @@ static u32 gpmc_round_ps_to_sync_clk(u32 time_ps, u32 sync_clk) /* XXX: can the cycles be avoided ? */ static int gpmc_calc_sync_read_timings(struct gpmc_timings *gpmc_t, - struct gpmc_device_timings *dev_t) + struct gpmc_device_timings *dev_t, + bool mux) { - bool mux = dev_t->mux; u32 temp; /* adv_rd_off */ @@ -880,9 +880,9 @@ static int gpmc_calc_sync_read_timings(struct gpmc_timings *gpmc_t, } static int gpmc_calc_sync_write_timings(struct gpmc_timings *gpmc_t, - struct gpmc_device_timings *dev_t) + struct gpmc_device_timings *dev_t, + bool mux) { - bool mux = dev_t->mux; u32 temp; /* adv_wr_off */ @@ -942,9 +942,9 @@ static int gpmc_calc_sync_write_timings(struct gpmc_timings *gpmc_t, } static int gpmc_calc_async_read_timings(struct gpmc_timings *gpmc_t, - struct gpmc_device_timings *dev_t) + struct gpmc_device_timings *dev_t, + bool mux) { - bool mux = dev_t->mux; u32 temp; /* adv_rd_off */ @@ -982,9 +982,9 @@ static int gpmc_calc_async_read_timings(struct gpmc_timings *gpmc_t, } static int gpmc_calc_async_write_timings(struct gpmc_timings *gpmc_t, - struct gpmc_device_timings *dev_t) + struct gpmc_device_timings *dev_t, + bool mux) { - bool mux = dev_t->mux; u32 temp; /* adv_wr_off */ @@ -1054,7 +1054,8 @@ static int gpmc_calc_sync_common_timings(struct gpmc_timings *gpmc_t, } static int gpmc_calc_common_timings(struct gpmc_timings *gpmc_t, - struct gpmc_device_timings *dev_t) + struct gpmc_device_timings *dev_t, + bool sync) { u32 temp; @@ -1068,7 +1069,7 @@ static int gpmc_calc_common_timings(struct gpmc_timings *gpmc_t, gpmc_t->cs_on + dev_t->t_ce_avd); gpmc_t->adv_on = gpmc_round_ps_to_ticks(temp); - if (dev_t->sync_write || dev_t->sync_read) + if (sync) gpmc_calc_sync_common_timings(gpmc_t, dev_t); return 0; @@ -1103,21 +1104,29 @@ static void gpmc_convert_ps_to_ns(struct gpmc_timings *t) } int gpmc_calc_timings(struct gpmc_timings *gpmc_t, - struct gpmc_device_timings *dev_t) + struct gpmc_settings *gpmc_s, + struct gpmc_device_timings *dev_t) { + bool mux = false, sync = false; + + if (gpmc_s) { + mux = gpmc_s->mux_add_data ? true : false; + sync = (gpmc_s->sync_read || gpmc_s->sync_write); + } + memset(gpmc_t, 0, sizeof(*gpmc_t)); - gpmc_calc_common_timings(gpmc_t, dev_t); + gpmc_calc_common_timings(gpmc_t, dev_t, sync); - if (dev_t->sync_read) - gpmc_calc_sync_read_timings(gpmc_t, dev_t); + if (gpmc_s && gpmc_s->sync_read) + gpmc_calc_sync_read_timings(gpmc_t, dev_t, mux); else - gpmc_calc_async_read_timings(gpmc_t, dev_t); + gpmc_calc_async_read_timings(gpmc_t, dev_t, mux); - if (dev_t->sync_write) - gpmc_calc_sync_write_timings(gpmc_t, dev_t); + if (gpmc_s && gpmc_s->sync_write) + gpmc_calc_sync_write_timings(gpmc_t, dev_t, mux); else - gpmc_calc_async_write_timings(gpmc_t, dev_t); + gpmc_calc_async_write_timings(gpmc_t, dev_t, mux); /* TODO: remove, see function definition */ gpmc_convert_ps_to_ns(gpmc_t); @@ -1125,6 +1134,90 @@ int gpmc_calc_timings(struct gpmc_timings *gpmc_t, return 0; } +/** + * gpmc_cs_program_settings - programs non-timing related settings + * @cs: GPMC chip-select to program + * @p: pointer to GPMC settings structure + * + * Programs non-timing related settings for a GPMC chip-select, such as + * bus-width, burst configuration, etc. Function should be called once + * for each chip-select that is being used and must be called before + * calling gpmc_cs_set_timings() as timing parameters in the CONFIG1 + * register will be initialised to zero by this function. Returns 0 on + * success and appropriate negative error code on failure. + */ +int gpmc_cs_program_settings(int cs, struct gpmc_settings *p) +{ + u32 config1; + + if ((!p->device_width) || (p->device_width > GPMC_DEVWIDTH_16BIT)) { + pr_err("%s: invalid width %d!", __func__, p->device_width); + return -EINVAL; + } + + /* Address-data multiplexing not supported for NAND devices */ + if (p->device_nand && p->mux_add_data) { + pr_err("%s: invalid configuration!\n", __func__); + return -EINVAL; + } + + if ((p->mux_add_data > GPMC_MUX_AD) || + ((p->mux_add_data == GPMC_MUX_AAD) && + !(gpmc_capability & GPMC_HAS_MUX_AAD))) { + pr_err("%s: invalid multiplex configuration!\n", __func__); + return -EINVAL; + } + + /* Page/burst mode supports lengths of 4, 8 and 16 bytes */ + if (p->burst_read || p->burst_write) { + switch (p->burst_len) { + case GPMC_BURST_4: + case GPMC_BURST_8: + case GPMC_BURST_16: + break; + default: + pr_err("%s: invalid page/burst-length (%d)\n", + __func__, p->burst_len); + return -EINVAL; + } + } + + if ((p->wait_on_read || p->wait_on_write) && + (p->wait_pin > gpmc_nr_waitpins)) { + pr_err("%s: invalid wait-pin (%d)\n", __func__, p->wait_pin); + return -EINVAL; + } + + config1 = GPMC_CONFIG1_DEVICESIZE((p->device_width - 1)); + + if (p->sync_read) + config1 |= GPMC_CONFIG1_READTYPE_SYNC; + if (p->sync_write) + config1 |= GPMC_CONFIG1_WRITETYPE_SYNC; + if (p->wait_on_read) + config1 |= GPMC_CONFIG1_WAIT_READ_MON; + if (p->wait_on_write) + config1 |= GPMC_CONFIG1_WAIT_WRITE_MON; + if (p->wait_on_read || p->wait_on_write) + config1 |= GPMC_CONFIG1_WAIT_PIN_SEL(p->wait_pin); + if (p->device_nand) + config1 |= GPMC_CONFIG1_DEVICETYPE(GPMC_DEVICETYPE_NAND); + if (p->mux_add_data) + config1 |= GPMC_CONFIG1_MUXTYPE(p->mux_add_data); + if (p->burst_read) + config1 |= GPMC_CONFIG1_READMULTIPLE_SUPP; + if (p->burst_write) + config1 |= GPMC_CONFIG1_WRITEMULTIPLE_SUPP; + if (p->burst_read || p->burst_write) { + config1 |= GPMC_CONFIG1_PAGE_LEN(p->burst_len >> 3); + config1 |= p->burst_wrap ? GPMC_CONFIG1_WRAPBURST_SUPP : 0; + } + + gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, config1); + + return 0; +} + #ifdef CONFIG_OF static struct of_device_id gpmc_dt_ids[] = { { .compatible = "ti,omap2420-gpmc" }, @@ -1136,70 +1229,110 @@ static struct of_device_id gpmc_dt_ids[] = { }; MODULE_DEVICE_TABLE(of, gpmc_dt_ids); +/** + * gpmc_read_settings_dt - read gpmc settings from device-tree + * @np: pointer to device-tree node for a gpmc child device + * @p: pointer to gpmc settings structure + * + * Reads the GPMC settings for a GPMC child device from device-tree and + * stores them in the GPMC settings structure passed. The GPMC settings + * structure is initialised to zero by this function and so any + * previously stored settings will be cleared. + */ +void gpmc_read_settings_dt(struct device_node *np, struct gpmc_settings *p) +{ + memset(p, 0, sizeof(struct gpmc_settings)); + + p->sync_read = of_property_read_bool(np, "gpmc,sync-read"); + p->sync_write = of_property_read_bool(np, "gpmc,sync-write"); + p->device_nand = of_property_read_bool(np, "gpmc,device-nand"); + of_property_read_u32(np, "gpmc,device-width", &p->device_width); + of_property_read_u32(np, "gpmc,mux-add-data", &p->mux_add_data); + + if (!of_property_read_u32(np, "gpmc,burst-length", &p->burst_len)) { + p->burst_wrap = of_property_read_bool(np, "gpmc,burst-wrap"); + p->burst_read = of_property_read_bool(np, "gpmc,burst-read"); + p->burst_write = of_property_read_bool(np, "gpmc,burst-write"); + if (!p->burst_read && !p->burst_write) + pr_warn("%s: page/burst-length set but not used!\n", + __func__); + } + + if (!of_property_read_u32(np, "gpmc,wait-pin", &p->wait_pin)) { + p->wait_on_read = of_property_read_bool(np, + "gpmc,wait-on-read"); + p->wait_on_write = of_property_read_bool(np, + "gpmc,wait-on-write"); + if (!p->wait_on_read && !p->wait_on_write) + pr_warn("%s: read/write wait monitoring not enabled!\n", + __func__); + } +} + static void __maybe_unused gpmc_read_timings_dt(struct device_node *np, struct gpmc_timings *gpmc_t) { - u32 val; + struct gpmc_bool_timings *p; + + if (!np || !gpmc_t) + return; memset(gpmc_t, 0, sizeof(*gpmc_t)); /* minimum clock period for syncronous mode */ - if (!of_property_read_u32(np, "gpmc,sync-clk", &val)) - gpmc_t->sync_clk = val; + of_property_read_u32(np, "gpmc,sync-clk-ps", &gpmc_t->sync_clk); /* chip select timtings */ - if (!of_property_read_u32(np, "gpmc,cs-on", &val)) - gpmc_t->cs_on = val; - - if (!of_property_read_u32(np, "gpmc,cs-rd-off", &val)) - gpmc_t->cs_rd_off = val; - - if (!of_property_read_u32(np, "gpmc,cs-wr-off", &val)) - gpmc_t->cs_wr_off = val; + of_property_read_u32(np, "gpmc,cs-on-ns", &gpmc_t->cs_on); + of_property_read_u32(np, "gpmc,cs-rd-off-ns", &gpmc_t->cs_rd_off); + of_property_read_u32(np, "gpmc,cs-wr-off-ns", &gpmc_t->cs_wr_off); /* ADV signal timings */ - if (!of_property_read_u32(np, "gpmc,adv-on", &val)) - gpmc_t->adv_on = val; - - if (!of_property_read_u32(np, "gpmc,adv-rd-off", &val)) - gpmc_t->adv_rd_off = val; - - if (!of_property_read_u32(np, "gpmc,adv-wr-off", &val)) - gpmc_t->adv_wr_off = val; + of_property_read_u32(np, "gpmc,adv-on-ns", &gpmc_t->adv_on); + of_property_read_u32(np, "gpmc,adv-rd-off-ns", &gpmc_t->adv_rd_off); + of_property_read_u32(np, "gpmc,adv-wr-off-ns", &gpmc_t->adv_wr_off); /* WE signal timings */ - if (!of_property_read_u32(np, "gpmc,we-on", &val)) - gpmc_t->we_on = val; - - if (!of_property_read_u32(np, "gpmc,we-off", &val)) - gpmc_t->we_off = val; + of_property_read_u32(np, "gpmc,we-on-ns", &gpmc_t->we_on); + of_property_read_u32(np, "gpmc,we-off-ns", &gpmc_t->we_off); /* OE signal timings */ - if (!of_property_read_u32(np, "gpmc,oe-on", &val)) - gpmc_t->oe_on = val; - - if (!of_property_read_u32(np, "gpmc,oe-off", &val)) - gpmc_t->oe_off = val; + of_property_read_u32(np, "gpmc,oe-on-ns", &gpmc_t->oe_on); + of_property_read_u32(np, "gpmc,oe-off-ns", &gpmc_t->oe_off); /* access and cycle timings */ - if (!of_property_read_u32(np, "gpmc,page-burst-access", &val)) - gpmc_t->page_burst_access = val; - - if (!of_property_read_u32(np, "gpmc,access", &val)) - gpmc_t->access = val; - - if (!of_property_read_u32(np, "gpmc,rd-cycle", &val)) - gpmc_t->rd_cycle = val; - - if (!of_property_read_u32(np, "gpmc,wr-cycle", &val)) - gpmc_t->wr_cycle = val; - - /* only for OMAP3430 */ - if (!of_property_read_u32(np, "gpmc,wr-access", &val)) - gpmc_t->wr_access = val; - - if (!of_property_read_u32(np, "gpmc,wr-data-mux-bus", &val)) - gpmc_t->wr_data_mux_bus = val; + of_property_read_u32(np, "gpmc,page-burst-access-ns", + &gpmc_t->page_burst_access); + of_property_read_u32(np, "gpmc,access-ns", &gpmc_t->access); + of_property_read_u32(np, "gpmc,rd-cycle-ns", &gpmc_t->rd_cycle); + of_property_read_u32(np, "gpmc,wr-cycle-ns", &gpmc_t->wr_cycle); + of_property_read_u32(np, "gpmc,bus-turnaround-ns", + &gpmc_t->bus_turnaround); + of_property_read_u32(np, "gpmc,cycle2cycle-delay-ns", + &gpmc_t->cycle2cycle_delay); + of_property_read_u32(np, "gpmc,wait-monitoring-ns", + &gpmc_t->wait_monitoring); + of_property_read_u32(np, "gpmc,clk-activation-ns", + &gpmc_t->clk_activation); + + /* only applicable to OMAP3+ */ + of_property_read_u32(np, "gpmc,wr-access-ns", &gpmc_t->wr_access); + of_property_read_u32(np, "gpmc,wr-data-mux-bus-ns", + &gpmc_t->wr_data_mux_bus); + + /* bool timing parameters */ + p = &gpmc_t->bool_timings; + + p->cycle2cyclediffcsen = + of_property_read_bool(np, "gpmc,cycle2cycle-diffcsen"); + p->cycle2cyclesamecsen = + of_property_read_bool(np, "gpmc,cycle2cycle-samecsen"); + p->we_extra_delay = of_property_read_bool(np, "gpmc,we-extra-delay"); + p->oe_extra_delay = of_property_read_bool(np, "gpmc,oe-extra-delay"); + p->adv_extra_delay = of_property_read_bool(np, "gpmc,adv-extra-delay"); + p->cs_extra_delay = of_property_read_bool(np, "gpmc,cs-extra-delay"); + p->time_para_granularity = + of_property_read_bool(np, "gpmc,time-para-granularity"); } #ifdef CONFIG_MTD_NAND @@ -1295,6 +1428,81 @@ static int gpmc_probe_onenand_child(struct platform_device *pdev, } #endif +/** + * gpmc_probe_generic_child - configures the gpmc for a child device + * @pdev: pointer to gpmc platform device + * @child: pointer to device-tree node for child device + * + * Allocates and configures a GPMC chip-select for a child device. + * Returns 0 on success and appropriate negative error code on failure. + */ +static int gpmc_probe_generic_child(struct platform_device *pdev, + struct device_node *child) +{ + struct gpmc_settings gpmc_s; + struct gpmc_timings gpmc_t; + struct resource res; + unsigned long base; + int ret, cs; + + if (of_property_read_u32(child, "reg", &cs) < 0) { + dev_err(&pdev->dev, "%s has no 'reg' property\n", + child->full_name); + return -ENODEV; + } + + if (of_address_to_resource(child, 0, &res) < 0) { + dev_err(&pdev->dev, "%s has malformed 'reg' property\n", + child->full_name); + return -ENODEV; + } + + ret = gpmc_cs_request(cs, resource_size(&res), &base); + if (ret < 0) { + dev_err(&pdev->dev, "cannot request GPMC CS %d\n", cs); + return ret; + } + + /* + * FIXME: gpmc_cs_request() will map the CS to an arbitary + * location in the gpmc address space. When booting with + * device-tree we want the NOR flash to be mapped to the + * location specified in the device-tree blob. So remap the + * CS to this location. Once DT migration is complete should + * just make gpmc_cs_request() map a specific address. + */ + ret = gpmc_cs_remap(cs, res.start); + if (ret < 0) { + dev_err(&pdev->dev, "cannot remap GPMC CS %d to 0x%x\n", + cs, res.start); + goto err; + } + + gpmc_read_settings_dt(child, &gpmc_s); + + ret = of_property_read_u32(child, "bank-width", &gpmc_s.device_width); + if (ret < 0) + goto err; + + ret = gpmc_cs_program_settings(cs, &gpmc_s); + if (ret < 0) + goto err; + + gpmc_read_timings_dt(child, &gpmc_t); + gpmc_cs_set_timings(cs, &gpmc_t); + + if (of_platform_device_create(child, NULL, &pdev->dev)) + return 0; + + dev_err(&pdev->dev, "failed to create gpmc child %s\n", child->name); + ret = -ENODEV; + +err: + gpmc_cs_free(cs); + + return ret; +} + static int gpmc_probe_dt(struct platform_device *pdev) { int ret; @@ -1305,6 +1513,13 @@ static int gpmc_probe_dt(struct platform_device *pdev) if (!of_id) return 0; + ret = of_property_read_u32(pdev->dev.of_node, "gpmc,num-waitpins", + &gpmc_nr_waitpins); + if (ret < 0) { + pr_err("%s: number of wait pins not found!\n", __func__); + return ret; + } + for_each_node_by_name(child, "nand") { ret = gpmc_probe_nand_child(pdev, child); if (ret < 0) { @@ -1320,6 +1535,23 @@ static int gpmc_probe_dt(struct platform_device *pdev) return ret; } } + + for_each_node_by_name(child, "nor") { + ret = gpmc_probe_generic_child(pdev, child); + if (ret < 0) { + of_node_put(child); + return ret; + } + } + + for_each_node_by_name(child, "ethernet") { + ret = gpmc_probe_generic_child(pdev, child); + if (ret < 0) { + of_node_put(child); + return ret; + } + } + return 0; } #else @@ -1364,25 +1596,37 @@ static int gpmc_probe(struct platform_device *pdev) gpmc_dev = &pdev->dev; l = gpmc_read_reg(GPMC_REVISION); + + /* + * FIXME: Once device-tree migration is complete the below flags + * should be populated based upon the device-tree compatible + * string. For now just use the IP revision. OMAP3+ devices have + * the wr_access and wr_data_mux_bus register fields. OMAP4+ + * devices support the addr-addr-data multiplex protocol. + * + * GPMC IP revisions: + * - OMAP24xx = 2.0 + * - OMAP3xxx = 5.0 + * - OMAP44xx/54xx/AM335x = 6.0 + */ if (GPMC_REVISION_MAJOR(l) > 0x4) gpmc_capability = GPMC_HAS_WR_ACCESS | GPMC_HAS_WR_DATA_MUX_BUS; + if (GPMC_REVISION_MAJOR(l) > 0x5) + gpmc_capability |= GPMC_HAS_MUX_AAD; dev_info(gpmc_dev, "GPMC revision %d.%d\n", GPMC_REVISION_MAJOR(l), GPMC_REVISION_MINOR(l)); - rc = gpmc_mem_init(); - if (IS_ERR_VALUE(rc)) { - clk_disable_unprepare(gpmc_l3_clk); - clk_put(gpmc_l3_clk); - dev_err(gpmc_dev, "failed to reserve memory\n"); - return rc; - } + gpmc_mem_init(); - if (IS_ERR_VALUE(gpmc_setup_irq())) + if (gpmc_setup_irq() < 0) dev_warn(gpmc_dev, "gpmc_setup_irq failed\n"); /* Now the GPMC is initialised, unreserve the chip-selects */ gpmc_cs_map = 0; + if (!pdev->dev.of_node) + gpmc_nr_waitpins = GPMC_NR_WAITPINS; + rc = gpmc_probe_dt(pdev); if (rc < 0) { clk_disable_unprepare(gpmc_l3_clk); diff --git a/arch/arm/mach-omap2/gpmc.h b/arch/arm/mach-omap2/gpmc.h index fe0a844..707f6d5 100644 --- a/arch/arm/mach-omap2/gpmc.h +++ b/arch/arm/mach-omap2/gpmc.h @@ -58,7 +58,7 @@ #define GPMC_CONFIG1_DEVICESIZE_16 GPMC_CONFIG1_DEVICESIZE(1) #define GPMC_CONFIG1_DEVICETYPE(val) ((val & 3) << 10) #define GPMC_CONFIG1_DEVICETYPE_NOR GPMC_CONFIG1_DEVICETYPE(0) -#define GPMC_CONFIG1_MUXADDDATA (1 << 9) +#define GPMC_CONFIG1_MUXTYPE(val) ((val & 3) << 8) #define GPMC_CONFIG1_TIME_PARA_GRAN (1 << 4) #define GPMC_CONFIG1_FCLK_DIV(val) (val & 3) #define GPMC_CONFIG1_FCLK_DIV2 (GPMC_CONFIG1_FCLK_DIV(1)) @@ -73,6 +73,13 @@ #define GPMC_IRQ_FIFOEVENTENABLE 0x01 #define GPMC_IRQ_COUNT_EVENT 0x02 +#define GPMC_BURST_4 4 /* 4 word burst */ +#define GPMC_BURST_8 8 /* 8 word burst */ +#define GPMC_BURST_16 16 /* 16 word burst */ +#define GPMC_DEVWIDTH_8BIT 1 /* 8-bit device width */ +#define GPMC_DEVWIDTH_16BIT 2 /* 16-bit device width */ +#define GPMC_MUX_AAD 1 /* Addr-Addr-Data multiplex */ +#define GPMC_MUX_AD 2 /* Addr-Data multiplex */ /* bool type time settings */ struct gpmc_bool_timings { @@ -178,10 +185,6 @@ struct gpmc_device_timings { u8 cyc_wpl; /* write deassertion time in cycles */ u32 cyc_iaa; /* initial access time in cycles */ - bool mux; /* address & data muxed */ - bool sync_write;/* synchronous write */ - bool sync_read; /* synchronous read */ - /* extra delays */ bool ce_xdelay; bool avd_xdelay; @@ -189,28 +192,40 @@ struct gpmc_device_timings { bool we_xdelay; }; +struct gpmc_settings { + bool burst_wrap; /* enables wrap bursting */ + bool burst_read; /* enables read page/burst mode */ + bool burst_write; /* enables write page/burst mode */ + bool device_nand; /* device is NAND */ + bool sync_read; /* enables synchronous reads */ + bool sync_write; /* enables synchronous writes */ + bool wait_on_read; /* monitor wait on reads */ + bool wait_on_write; /* monitor wait on writes */ + u32 burst_len; /* page/burst length */ + u32 device_width; /* device bus width (8 or 16 bit) */ + u32 mux_add_data; /* multiplex address & data */ + u32 wait_pin; /* wait-pin to be used */ +}; + extern int gpmc_calc_timings(struct gpmc_timings *gpmc_t, - struct gpmc_device_timings *dev_t); + struct gpmc_settings *gpmc_s, + struct gpmc_device_timings *dev_t); extern void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs); extern int gpmc_get_client_irq(unsigned irq_config); -extern unsigned int gpmc_ns_to_ticks(unsigned int time_ns); -extern unsigned int gpmc_ps_to_ticks(unsigned int time_ps); extern unsigned int gpmc_ticks_to_ns(unsigned int ticks); -extern unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns); -extern unsigned long gpmc_get_fclk_period(void); extern void gpmc_cs_write_reg(int cs, int idx, u32 val); -extern u32 gpmc_cs_read_reg(int cs, int idx); extern int gpmc_calc_divider(unsigned int sync_clk); extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t); +extern int gpmc_cs_program_settings(int cs, struct gpmc_settings *p); extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base); extern void gpmc_cs_free(int cs); -extern int gpmc_cs_set_reserved(int cs, int reserved); -extern int gpmc_cs_reserved(int cs); extern void omap3_gpmc_save_context(void); extern void omap3_gpmc_restore_context(void); -extern int gpmc_cs_configure(int cs, int cmd, int wval); +extern int gpmc_configure(int cmd, int wval); +extern void gpmc_read_settings_dt(struct device_node *np, + struct gpmc_settings *p); #endif diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 8a68f1e..ff0bc9e 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -529,22 +529,28 @@ void __init omap5xxx_check_revision(void) case 0xb942: switch (rev) { case 0: - default: omap_revision = OMAP5430_REV_ES1_0; + break; + case 1: + default: + omap_revision = OMAP5430_REV_ES2_0; } break; case 0xb998: switch (rev) { case 0: - default: omap_revision = OMAP5432_REV_ES1_0; + break; + case 1: + default: + omap_revision = OMAP5432_REV_ES2_0; } break; default: /* Unknown default to latest silicon rev as default*/ - omap_revision = OMAP5430_REV_ES1_0; + omap_revision = OMAP5430_REV_ES2_0; } pr_info("OMAP%04x ES%d.0\n", diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 2c3fdd6..2bef5a7 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -271,6 +271,14 @@ static struct map_desc omap54xx_io_desc[] __initdata = { .length = L4_PER_54XX_SIZE, .type = MT_DEVICE, }, +#ifdef CONFIG_OMAP4_ERRATA_I688 + { + .virtual = OMAP4_SRAM_VA, + .pfn = __phys_to_pfn(OMAP4_SRAM_PA), + .length = PAGE_SIZE, + .type = MT_MEMORY_SO, + }, +#endif }; #endif @@ -323,6 +331,7 @@ void __init omap4_map_io(void) void __init omap5_map_io(void) { iotable_init(omap54xx_io_desc, ARRAY_SIZE(omap54xx_io_desc)); + omap_barriers_init(); } #endif /* diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index 708bb11..2aeb928 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -240,15 +240,21 @@ void __iomem *omap4_get_sar_ram_base(void) */ static int __init omap4_sar_ram_init(void) { + unsigned long sar_base; + /* * To avoid code running on other OMAPs in * multi-omap builds */ - if (!cpu_is_omap44xx()) + if (cpu_is_omap44xx()) + sar_base = OMAP44XX_SAR_RAM_BASE; + else if (soc_is_omap54xx()) + sar_base = OMAP54XX_SAR_RAM_BASE; + else return -ENOMEM; /* Static mapping, never released */ - sar_ram_base = ioremap(OMAP44XX_SAR_RAM_BASE, SZ_16K); + sar_ram_base = ioremap(sar_base, SZ_16K); if (WARN_ON(!sar_ram_base)) return -ENOMEM; diff --git a/arch/arm/mach-omap2/omap4-sar-layout.h b/arch/arm/mach-omap2/omap4-sar-layout.h index e170fe8..9374175 100644 --- a/arch/arm/mach-omap2/omap4-sar-layout.h +++ b/arch/arm/mach-omap2/omap4-sar-layout.h @@ -48,13 +48,13 @@ #define SAR_BACKUP_STATUS_WAKEUPGEN 0x10 /* WakeUpGen save restore offset from OMAP54XX_SAR_RAM_BASE */ -#define OMAP5_WAKEUPGENENB_OFFSET_CPU0 (SAR_BANK3_OFFSET + 0x8d4) -#define OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU0 (SAR_BANK3_OFFSET + 0x8e8) -#define OMAP5_WAKEUPGENENB_OFFSET_CPU1 (SAR_BANK3_OFFSET + 0x8fc) -#define OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU1 (SAR_BANK3_OFFSET + 0x910) -#define OMAP5_AUXCOREBOOT0_OFFSET (SAR_BANK3_OFFSET + 0x924) -#define OMAP5_AUXCOREBOOT1_OFFSET (SAR_BANK3_OFFSET + 0x928) -#define OMAP5_AMBA_IF_MODE_OFFSET (SAR_BANK3_OFFSET + 0x92c) +#define OMAP5_WAKEUPGENENB_OFFSET_CPU0 (SAR_BANK3_OFFSET + 0x9dc) +#define OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU0 (SAR_BANK3_OFFSET + 0x9f0) +#define OMAP5_WAKEUPGENENB_OFFSET_CPU1 (SAR_BANK3_OFFSET + 0xa04) +#define OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU1 (SAR_BANK3_OFFSET + 0xa18) +#define OMAP5_AUXCOREBOOT0_OFFSET (SAR_BANK3_OFFSET + 0xa2c) +#define OMAP5_AUXCOREBOOT1_OFFSET (SAR_BANK3_OFFSET + 0x930) +#define OMAP5_AMBA_IF_MODE_OFFSET (SAR_BANK3_OFFSET + 0xa34) #define OMAP5_SAR_BACKUP_STATUS_OFFSET (SAR_BANK3_OFFSET + 0x800) #endif diff --git a/arch/arm/mach-omap2/omap54xx.h b/arch/arm/mach-omap2/omap54xx.h index a2582bb..a086ba1 100644 --- a/arch/arm/mach-omap2/omap54xx.h +++ b/arch/arm/mach-omap2/omap54xx.h @@ -28,5 +28,6 @@ #define OMAP54XX_PRCM_MPU_BASE 0x48243000 #define OMAP54XX_SCM_BASE 0x4a002000 #define OMAP54XX_CTRL_BASE 0x4a002800 +#define OMAP54XX_SAR_RAM_BASE 0x4ae26000 #endif /* __ASM_SOC_OMAP555554XX_H */ diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index 381be7a..eeea4fa 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -131,7 +131,7 @@ static int omap_device_build_from_dt(struct platform_device *pdev) int oh_cnt, i, ret = 0; oh_cnt = of_property_count_strings(node, "ti,hwmods"); - if (!oh_cnt || IS_ERR_VALUE(oh_cnt)) { + if (oh_cnt <= 0) { dev_dbg(&pdev->dev, "No 'hwmods' to build omap_device\n"); return -ENODEV; } @@ -815,20 +815,17 @@ struct device *omap_device_get_by_hwmod_name(const char *oh_name) } oh = omap_hwmod_lookup(oh_name); - if (IS_ERR_OR_NULL(oh)) { + if (!oh) { WARN(1, "%s: no hwmod for %s\n", __func__, oh_name); - return ERR_PTR(oh ? PTR_ERR(oh) : -ENODEV); + return ERR_PTR(-ENODEV); } - if (IS_ERR_OR_NULL(oh->od)) { + if (!oh->od) { WARN(1, "%s: no omap_device for %s\n", __func__, oh_name); - return ERR_PTR(oh->od ? PTR_ERR(oh->od) : -ENODEV); + return ERR_PTR(-ENODEV); } - if (IS_ERR_OR_NULL(oh->od->pdev)) - return ERR_PTR(oh->od->pdev ? PTR_ERR(oh->od->pdev) : -ENODEV); - return &oh->od->pdev->dev; } diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index c2c798c..2520d46 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -610,8 +610,6 @@ static int _enable_wakeup(struct omap_hwmod *oh, u32 *v) /* XXX test pwrdm_get_wken for this hwmod's subsystem */ - oh->_int_flags |= _HWMOD_WAKEUP_ENABLED; - return 0; } @@ -645,8 +643,6 @@ static int _disable_wakeup(struct omap_hwmod *oh, u32 *v) /* XXX test pwrdm_get_wken for this hwmod's subsystem */ - oh->_int_flags &= ~_HWMOD_WAKEUP_ENABLED; - return 0; } @@ -1663,7 +1659,7 @@ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name) return -ENOSYS; ret = _lookup_hardreset(oh, name, &ohri); - if (IS_ERR_VALUE(ret)) + if (ret < 0) return ret; if (oh->clkdm) { @@ -2413,7 +2409,7 @@ static int __init _init(struct omap_hwmod *oh, void *data) _init_mpu_rt_base(oh, NULL); r = _init_clocks(oh, NULL); - if (IS_ERR_VALUE(r)) { + if (r < 0) { WARN(1, "omap_hwmod: %s: couldn't init clocks\n", oh->name); return -EINVAL; } diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index d43d9b6..28f4dea 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -477,15 +477,13 @@ struct omap_hwmod_omap4_prcm { * These are for internal use only and are managed by the omap_hwmod code. * * _HWMOD_NO_MPU_PORT: no path exists for the MPU to write to this module - * _HWMOD_WAKEUP_ENABLED: set when the omap_hwmod code has enabled ENAWAKEUP * _HWMOD_SYSCONFIG_LOADED: set when the OCP_SYSCONFIG value has been cached * _HWMOD_SKIP_ENABLE: set if hwmod enabled during init (HWMOD_INIT_NO_IDLE) - * causes the first call to _enable() to only update the pinmux */ #define _HWMOD_NO_MPU_PORT (1 << 0) -#define _HWMOD_WAKEUP_ENABLED (1 << 1) -#define _HWMOD_SYSCONFIG_LOADED (1 << 2) -#define _HWMOD_SKIP_ENABLE (1 << 3) +#define _HWMOD_SYSCONFIG_LOADED (1 << 1) +#define _HWMOD_SKIP_ENABLE (1 << 2) /* * omap_hwmod._state definitions diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c index 26eee4a..31bea1c 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -28,6 +28,7 @@ #include "prm-regbits-33xx.h" #include "i2c.h" #include "mmc.h" +#include "wd_timer.h" /* * IP blocks @@ -2087,8 +2088,21 @@ static struct omap_hwmod am33xx_uart6_hwmod = { }; /* 'wd_timer' class */ +static struct omap_hwmod_class_sysconfig wdt_sysc = { + .rev_offs = 0x0, + .sysc_offs = 0x10, + .syss_offs = 0x14, + .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + static struct omap_hwmod_class am33xx_wd_timer_hwmod_class = { .name = "wd_timer", + .sysc = &wdt_sysc, + .pre_shutdown = &omap2_wd_timer_disable, }; /* @@ -2099,6 +2113,7 @@ static struct omap_hwmod am33xx_wd_timer1_hwmod = { .name = "wd_timer2", .class = &am33xx_wd_timer_hwmod_class, .clkdm_name = "l4_wkup_clkdm", + .flags = HWMOD_SWSUP_SIDLE, .main_clk = "wdt1_fck", .prcm = { .omap4 = { diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index 1edd000..0b33986 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -217,7 +217,7 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *dir) return 0; d = debugfs_create_dir(pwrdm->name, (struct dentry *)dir); - if (!(IS_ERR_OR_NULL(d))) + if (d) (void) debugfs_create_file("suspend", S_IRUGO|S_IWUSR, d, (void *)pwrdm, &pwrdm_suspend_fops); @@ -261,8 +261,8 @@ static int __init pm_dbg_init(void) return 0; d = debugfs_create_dir("pm_debug", NULL); - if (IS_ERR_OR_NULL(d)) - return PTR_ERR(d); + if (!d) + return -EINVAL; (void) debugfs_create_file("count", S_IRUGO, d, (void *)DEBUG_FILE_COUNTERS, &debug_fops); diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 8e61d80..86babd7 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -52,7 +52,6 @@ enum { #define ALREADYACTIVE_SWITCH 0 #define FORCEWAKEUP_SWITCH 1 #define LOWPOWERSTATE_SWITCH 2 -#define ERROR_SWITCH 3 /* pwrdm_list contains all registered struct powerdomains */ static LIST_HEAD(pwrdm_list); @@ -233,10 +232,7 @@ static u8 _pwrdm_save_clkdm_state_and_activate(struct powerdomain *pwrdm, { u8 sleep_switch; - if (curr_pwrst < 0) { - WARN_ON(1); - sleep_switch = ERROR_SWITCH; - } else if (curr_pwrst < PWRDM_POWER_ON) { + if (curr_pwrst < PWRDM_POWER_ON) { if (curr_pwrst > pwrst && pwrdm->flags & PWRDM_HAS_LOWPOWERSTATECHANGE && arch_pwrdm->pwrdm_set_lowpwrstchange) { @@ -1091,7 +1087,8 @@ int pwrdm_post_transition(struct powerdomain *pwrdm) */ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u8 pwrst) { - u8 curr_pwrst, next_pwrst, sleep_switch; + u8 next_pwrst, sleep_switch; + int curr_pwrst; int ret = 0; bool hwsup = false; @@ -1107,16 +1104,17 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u8 pwrst) pwrdm_lock(pwrdm); curr_pwrst = pwrdm_read_pwrst(pwrdm); + if (curr_pwrst < 0) { + ret = -EINVAL; + goto osps_out; + } + next_pwrst = pwrdm_read_next_pwrst(pwrdm); if (curr_pwrst == pwrst && next_pwrst == pwrst) goto osps_out; sleep_switch = _pwrdm_save_clkdm_state_and_activate(pwrdm, curr_pwrst, pwrst, &hwsup); - if (sleep_switch == ERROR_SWITCH) { - ret = -EINVAL; - goto osps_out; - } ret = pwrdm_set_next_pwrst(pwrdm, pwrst); if (ret) @@ -1182,7 +1180,7 @@ bool pwrdm_can_ever_lose_context(struct powerdomain *pwrdm) { int i; - if (IS_ERR_OR_NULL(pwrdm)) { + if (!pwrdm) { pr_debug("powerdomain: %s: invalid powerdomain pointer\n", __func__); return 1; diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index d35f98a..415c7e0 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c @@ -81,13 +81,13 @@ static struct prm_reset_src_map omap44xx_prm_reset_src_map[] = { /* Read a register in a CM/PRM instance in the PRM module */ u32 omap4_prm_read_inst_reg(s16 inst, u16 reg) { - return __raw_readl(OMAP44XX_PRM_REGADDR(inst, reg)); + return __raw_readl(prm_base + inst + reg); } /* Write into a register in a CM/PRM instance in the PRM module */ void omap4_prm_write_inst_reg(u32 val, s16 inst, u16 reg) { - __raw_writel(val, OMAP44XX_PRM_REGADDR(inst, reg)); + __raw_writel(val, prm_base + inst + reg); } /* Read-modify-write a register in a PRM module. Caller must lock */ @@ -650,7 +650,7 @@ static struct prm_ll_data omap44xx_prm_ll_data = { int __init omap44xx_prm_init(void) { - if (!cpu_is_omap44xx()) + if (!cpu_is_omap44xx() && !soc_is_omap54xx()) return 0; return prm_register(&omap44xx_prm_ll_data); diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h index c62116b..18fdeeb 100644 --- a/arch/arm/mach-omap2/soc.h +++ b/arch/arm/mach-omap2/soc.h @@ -413,7 +413,9 @@ IS_OMAP_TYPE(3430, 0x3430) #define OMAP54XX_CLASS 0x54000054 #define OMAP5430_REV_ES1_0 (OMAP54XX_CLASS | (0x30 << 16) | (0x10 << 8)) +#define OMAP5430_REV_ES2_0 (OMAP54XX_CLASS | (0x30 << 16) | (0x20 << 8)) #define OMAP5432_REV_ES1_0 (OMAP54XX_CLASS | (0x32 << 16) | (0x10 << 8)) +#define OMAP5432_REV_ES2_0 (OMAP54XX_CLASS | (0x32 << 16) | (0x20 << 8)) void omap2xxx_check_revision(void); void omap3xxx_check_revision(void); diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 2bdd4cf..f12aa6c 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -57,15 +57,6 @@ #include "common.h" #include "powerdomain.h" -/* Parent clocks, eventually these will come from the clock framework */ - -#define OMAP2_MPU_SOURCE "sys_ck" -#define OMAP3_MPU_SOURCE OMAP2_MPU_SOURCE -#define OMAP4_MPU_SOURCE "sys_clkin_ck" -#define OMAP2_32K_SOURCE "func_32k_ck" -#define OMAP3_32K_SOURCE "omap_32k_fck" -#define OMAP4_32K_SOURCE "sys_32k_ck" - #define REALTIME_COUNTER_BASE 0x48243200 #define INCREMENTER_NUMERATOR_OFFSET 0x10 #define INCREMENTER_DENUMERATOR_RELOAD_OFFSET 0x14 @@ -129,7 +120,6 @@ static void omap2_gp_timer_set_mode(enum clock_event_mode mode, } static struct clock_event_device clockevent_gpt = { - .name = "gp_timer", .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, .rating = 300, .set_next_event = omap2_gp_timer_set_next_event, @@ -170,6 +160,12 @@ static struct device_node * __init omap_get_timer_dt(struct of_device_id *match, if (property && !of_get_property(np, property, NULL)) continue; + if (!property && (of_get_property(np, "ti,timer-alwon", NULL) || + of_get_property(np, "ti,timer-dsp", NULL) || + of_get_property(np, "ti,timer-pwm", NULL) || + of_get_property(np, "ti,timer-secure", NULL))) + continue; + of_add_property(np, &device_disabled); return np; } @@ -214,16 +210,17 @@ static u32 __init omap_dm_timer_get_errata(void) } static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, - int gptimer_id, - const char *fck_source, - const char *property, - int posted) + const char *fck_source, + const char *property, + const char **timer_name, + int posted) { char name[10]; /* 10 = sizeof("gptXX_Xck0") */ const char *oh_name; struct device_node *np; struct omap_hwmod *oh; struct resource irq, mem; + struct clk *src; int r = 0; if (of_have_populated_dt()) { @@ -243,10 +240,10 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, of_node_put(np); } else { - if (omap_dm_timer_reserve_systimer(gptimer_id)) + if (omap_dm_timer_reserve_systimer(timer->id)) return -ENODEV; - sprintf(name, "timer%d", gptimer_id); + sprintf(name, "timer%d", timer->id); oh_name = name; } @@ -254,6 +251,8 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, if (!oh) return -ENODEV; + *timer_name = oh->name; + if (!of_have_populated_dt()) { r = omap_hwmod_get_resource_byname(oh, IORESOURCE_IRQ, NULL, &irq); @@ -276,24 +275,24 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, /* After the dmtimer is using hwmod these clocks won't be needed */ timer->fclk = clk_get(NULL, omap_hwmod_get_main_clk(oh)); if (IS_ERR(timer->fclk)) - return -ENODEV; + return PTR_ERR(timer->fclk); - /* FIXME: Need to remove hard-coded test on timer ID */ - if (gptimer_id != 12) { - struct clk *src; - - src = clk_get(NULL, fck_source); - if (IS_ERR(src)) { - r = -EINVAL; - } else { - r = clk_set_parent(timer->fclk, src); - if (IS_ERR_VALUE(r)) - pr_warn("%s: %s cannot set source\n", - __func__, oh->name); + src = clk_get(NULL, fck_source); + if (IS_ERR(src)) + return PTR_ERR(src); + + if (clk_get_parent(timer->fclk) != src) { + r = clk_set_parent(timer->fclk, src); + if (r < 0) { + pr_warn("%s: %s cannot set source\n", __func__, + oh->name); clk_put(src); + return r; } } + clk_put(src); + omap_hwmod_setup_one(oh_name); omap_hwmod_enable(oh); __omap_dm_timer_init_regs(timer); @@ -317,6 +316,7 @@ static void __init omap2_gp_clockevent_init(int gptimer_id, { int res; + clkev.id = gptimer_id; clkev.errata = omap_dm_timer_get_errata(); /* @@ -326,8 +326,8 @@ static void __init omap2_gp_clockevent_init(int gptimer_id, */ __omap_dm_timer_override_errata(&clkev, OMAP_TIMER_ERRATA_I103_I767); - res = omap_dm_timer_init_one(&clkev, gptimer_id, fck_source, property, - OMAP_TIMER_POSTED); + res = omap_dm_timer_init_one(&clkev, fck_source, property, + &clockevent_gpt.name, OMAP_TIMER_POSTED); BUG_ON(res); omap2_gp_timer_irq.dev_id = &clkev; @@ -341,8 +341,8 @@ static void __init omap2_gp_clockevent_init(int gptimer_id, 3, /* Timer internal resynch latency */ 0xffffffff); - pr_info("OMAP clockevent source: GPTIMER%d at %lu Hz\n", - gptimer_id, clkev.rate); + pr_info("OMAP clockevent source: %s at %lu Hz\n", clockevent_gpt.name, + clkev.rate); } /* Clocksource code */ @@ -359,7 +359,6 @@ static cycle_t clocksource_read_cycles(struct clocksource *cs) } static struct clocksource clocksource_gpt = { - .name = "gp_timer", .rating = 300, .read = clocksource_read_cycles, .mask = CLOCKSOURCE_MASK(32), @@ -442,13 +441,16 @@ static int __init __maybe_unused omap2_sync32k_clocksource_init(void) } static void __init omap2_gptimer_clocksource_init(int gptimer_id, - const char *fck_source) + const char *fck_source, + const char *property) { int res; + clksrc.id = gptimer_id; clksrc.errata = omap_dm_timer_get_errata(); - res = omap_dm_timer_init_one(&clksrc, gptimer_id, fck_source, NULL, + res = omap_dm_timer_init_one(&clksrc, fck_source, property, + &clocksource_gpt.name, OMAP_TIMER_NONPOSTED); BUG_ON(res); @@ -461,8 +463,8 @@ static void __init omap2_gptimer_clocksource_init(int gptimer_id, pr_err("Could not register clocksource %s\n", clocksource_gpt.name); else - pr_info("OMAP clocksource: GPTIMER%d at %lu Hz\n", - gptimer_id, clksrc.rate); + pr_info("OMAP clocksource: %s at %lu Hz\n", + clocksource_gpt.name, clksrc.rate); } #ifdef CONFIG_SOC_HAS_REALTIME_COUNTER @@ -487,7 +489,7 @@ static void __init realtime_counter_init(void) pr_err("%s: ioremap failed\n", __func__); return; } - sys_clk = clk_get(NULL, "sys_clkin_ck"); + sys_clk = clk_get(NULL, "sys_clkin"); if (IS_ERR(sys_clk)) { pr_err("%s: failed to get system clock handle\n", __func__); iounmap(base); @@ -544,49 +546,52 @@ static inline void __init realtime_counter_init(void) #endif #define OMAP_SYS_GP_TIMER_INIT(name, clkev_nr, clkev_src, clkev_prop, \ - clksrc_nr, clksrc_src) \ + clksrc_nr, clksrc_src, clksrc_prop) \ void __init omap##name##_gptimer_timer_init(void) \ { \ omap_dmtimer_init(); \ omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \ - omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src); \ + omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src, \ + clksrc_prop); \ } #define OMAP_SYS_32K_TIMER_INIT(name, clkev_nr, clkev_src, clkev_prop, \ - clksrc_nr, clksrc_src) \ + clksrc_nr, clksrc_src, clksrc_prop) \ void __init omap##name##_sync32k_timer_init(void) \ { \ omap_dmtimer_init(); \ omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \ /* Enable the use of clocksource="gp_timer" kernel parameter */ \ if (use_gptimer_clksrc) \ - omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src);\ + omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src, \ + clksrc_prop); \ else \ omap2_sync32k_clocksource_init(); \ } #ifdef CONFIG_ARCH_OMAP2 -OMAP_SYS_32K_TIMER_INIT(2, 1, OMAP2_32K_SOURCE, "ti,timer-alwon", - 2, OMAP2_MPU_SOURCE); +OMAP_SYS_32K_TIMER_INIT(2, 1, "timer_32k_ck", "ti,timer-alwon", + 2, "timer_sys_ck", NULL); #endif /* CONFIG_ARCH_OMAP2 */ #ifdef CONFIG_ARCH_OMAP3 -OMAP_SYS_32K_TIMER_INIT(3, 1, OMAP3_32K_SOURCE, "ti,timer-alwon", - 2, OMAP3_MPU_SOURCE); -OMAP_SYS_32K_TIMER_INIT(3_secure, 12, OMAP3_32K_SOURCE, "ti,timer-secure", - 2, OMAP3_MPU_SOURCE); -OMAP_SYS_GP_TIMER_INIT(3_gp, 1, OMAP3_MPU_SOURCE, "ti,timer-alwon", - 2, OMAP3_MPU_SOURCE); +OMAP_SYS_32K_TIMER_INIT(3, 1, "timer_32k_ck", "ti,timer-alwon", + 2, "timer_sys_ck", NULL); +OMAP_SYS_32K_TIMER_INIT(3_secure, 12, "secure_32k_fck", "ti,timer-secure", + 2, "timer_sys_ck", NULL); #endif /* CONFIG_ARCH_OMAP3 */ -#ifdef CONFIG_SOC_AM33XX -OMAP_SYS_GP_TIMER_INIT(3_am33xx, 1, OMAP4_MPU_SOURCE, "ti,timer-alwon", - 2, OMAP4_MPU_SOURCE); -#endif /* CONFIG_SOC_AM33XX */ +#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX) +OMAP_SYS_GP_TIMER_INIT(3, 2, "timer_sys_ck", NULL, + 1, "timer_sys_ck", "ti,timer-alwon"); +#endif + +#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) +static OMAP_SYS_32K_TIMER_INIT(4, 1, "timer_32k_ck", "ti,timer-alwon", + 2, "sys_clkin_ck", NULL); +#endif #ifdef CONFIG_ARCH_OMAP4 -OMAP_SYS_32K_TIMER_INIT(4, 1, OMAP4_32K_SOURCE, "ti,timer-alwon", - 2, OMAP4_MPU_SOURCE); #ifdef CONFIG_LOCAL_TIMERS static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, OMAP44XX_LOCAL_TWD_BASE, 29); void __init omap4_local_timer_init(void) @@ -597,7 +602,7 @@ void __init omap4_local_timer_init(void) int err; if (of_have_populated_dt()) { - twd_local_timer_of_register(); + clocksource_of_init(); return; } @@ -615,13 +620,11 @@ void __init omap4_local_timer_init(void) #endif /* CONFIG_ARCH_OMAP4 */ #ifdef CONFIG_SOC_OMAP5 -OMAP_SYS_32K_TIMER_INIT(5, 1, OMAP4_32K_SOURCE, "ti,timer-alwon", - 2, OMAP4_MPU_SOURCE); void __init omap5_realtime_timer_init(void) { int err; - omap5_sync32k_timer_init(); + omap4_sync32k_timer_init(); realtime_counter_init(); err = arch_timer_of_register(); diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c index 5706bdc..aa27d7f 100644 --- a/arch/arm/mach-omap2/usb-host.c +++ b/arch/arm/mach-omap2/usb-host.c @@ -22,8 +22,12 @@ #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/dma-mapping.h> - -#include <asm/io.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> +#include <linux/string.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/usb/phy.h> #include "soc.h" #include "omap_device.h" @@ -526,3 +530,155 @@ void __init usbhs_init(struct usbhs_omap_platform_data *pdata) } #endif + +/* Template for PHY regulators */ +static struct fixed_voltage_config hsusb_reg_config = { + /* .supply_name filled later */ + .microvolts = 3300000, + .gpio = -1, /* updated later */ + .startup_delay = 70000, /* 70msec */ + .enable_high = 1, /* updated later */ + .enabled_at_boot = 0, /* keep in RESET */ + /* .init_data filled later */ +}; + +static const char *nop_name = "nop_usb_xceiv"; /* NOP PHY driver */ +static const char *reg_name = "reg-fixed-voltage"; /* Regulator driver */ + +/** + * usbhs_add_regulator - Add a gpio based fixed voltage regulator device + * @name: name for the regulator + * @dev_id: device id of the device this regulator supplies power to + * @dev_supply: supply name that the device expects + * @gpio: GPIO number + * @polarity: 1 - Active high, 0 - Active low + */ +static int usbhs_add_regulator(char *name, char *dev_id, char *dev_supply, + int gpio, int polarity) +{ + struct regulator_consumer_supply *supplies; + struct regulator_init_data *reg_data; + struct fixed_voltage_config *config; + struct platform_device *pdev; + int ret; + + supplies = kzalloc(sizeof(*supplies), GFP_KERNEL); + if (!supplies) + return -ENOMEM; + + supplies->supply = dev_supply; + supplies->dev_name = dev_id; + + reg_data = kzalloc(sizeof(*reg_data), GFP_KERNEL); + if (!reg_data) + return -ENOMEM; + + reg_data->constraints.valid_ops_mask = REGULATOR_CHANGE_STATUS; + reg_data->consumer_supplies = supplies; + reg_data->num_consumer_supplies = 1; + + config = kmemdup(&hsusb_reg_config, sizeof(hsusb_reg_config), + GFP_KERNEL); + if (!config) + return -ENOMEM; + + config->supply_name = name; + config->gpio = gpio; + config->enable_high = polarity; + config->init_data = reg_data; + + /* create a regulator device */ + pdev = kzalloc(sizeof(*pdev), GFP_KERNEL); + if (!pdev) + return -ENOMEM; + + pdev->id = PLATFORM_DEVID_AUTO; + pdev->name = reg_name; + pdev->dev.platform_data = config; + + ret = platform_device_register(pdev); + if (ret) + pr_err("%s: Failed registering regulator %s for %s\n", + __func__, name, dev_id); + + return ret; +} + +int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys) +{ + char *rail_name; + int i, len; + struct platform_device *pdev; + char *phy_id; + + /* the phy_id will be something like "nop_usb_xceiv.1" */ + len = strlen(nop_name) + 3; /* 3 -> ".1" and NULL terminator */ + + for (i = 0; i < num_phys; i++) { + + if (!phy->port) { + pr_err("%s: Invalid port 0. Must start from 1\n", + __func__); + continue; + } + + /* do we need a NOP PHY device ? */ + if (!gpio_is_valid(phy->reset_gpio) && + !gpio_is_valid(phy->vcc_gpio)) + continue; + + /* create a NOP PHY device */ + pdev = kzalloc(sizeof(*pdev), GFP_KERNEL); + if (!pdev) + return -ENOMEM; + + pdev->id = phy->port; + pdev->name = nop_name; + pdev->dev.platform_data = phy->platform_data; + + phy_id = kmalloc(len, GFP_KERNEL); + if (!phy_id) + return -ENOMEM; + + scnprintf(phy_id, len, "nop_usb_xceiv.%d\n", + pdev->id); + + if (platform_device_register(pdev)) { + pr_err("%s: Failed to register device %s\n", + __func__, phy_id); + continue; + } + + usb_bind_phy("ehci-omap.0", phy->port - 1, phy_id); + + /* Do we need RESET regulator ? */ + if (gpio_is_valid(phy->reset_gpio)) { + + rail_name = kmalloc(13, GFP_KERNEL); + if (!rail_name) + return -ENOMEM; + + scnprintf(rail_name, 13, "hsusb%d_reset", phy->port); + + usbhs_add_regulator(rail_name, phy_id, "reset", + phy->reset_gpio, 1); + } + + /* Do we need VCC regulator ? */ + if (gpio_is_valid(phy->vcc_gpio)) { + + rail_name = kmalloc(13, GFP_KERNEL); + if (!rail_name) + return -ENOMEM; + + scnprintf(rail_name, 13, "hsusb%d_vcc", phy->port); + + usbhs_add_regulator(rail_name, phy_id, "vcc", + phy->vcc_gpio, phy->vcc_polarity); + } + + phy++; + } + + return 0; +} diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c index c5a3c6f..e832bc7 100644 --- a/arch/arm/mach-omap2/usb-tusb6010.c +++ b/arch/arm/mach-omap2/usb-tusb6010.c @@ -8,6 +8,7 @@ * published by the Free Software Foundation. */ +#include <linux/err.h> #include <linux/string.h> #include <linux/types.h> #include <linux/errno.h> @@ -26,6 +27,24 @@ static u8 async_cs, sync_cs; static unsigned refclk_psec; +static struct gpmc_settings tusb_async = { + .wait_on_read = true, + .wait_on_write = true, + .device_width = GPMC_DEVWIDTH_16BIT, + .mux_add_data = GPMC_MUX_AD, +}; + +static struct gpmc_settings tusb_sync = { + .burst_read = true, + .burst_write = true, + .sync_read = true, + .sync_write = true, + .wait_on_read = true, + .wait_on_write = true, + .burst_len = GPMC_BURST_16, + .device_width = GPMC_DEVWIDTH_16BIT, + .mux_add_data = GPMC_MUX_AD, +}; /* NOTE: timings are from tusb 6010 datasheet Rev 1.8, 12-Sept 2006 */ @@ -37,8 +56,6 @@ static int tusb_set_async_mode(unsigned sysclk_ps) memset(&dev_t, 0, sizeof(dev_t)); - dev_t.mux = true; - dev_t.t_ceasu = 8 * 1000; dev_t.t_avdasu = t_acsnh_advnh - 7000; dev_t.t_ce_avd = 1000; @@ -52,7 +69,7 @@ static int tusb_set_async_mode(unsigned sysclk_ps) dev_t.t_wpl = 300; dev_t.cyc_aavdh_we = 1; - gpmc_calc_timings(&t, &dev_t); + gpmc_calc_timings(&t, &tusb_async, &dev_t); return gpmc_cs_set_timings(async_cs, &t); } @@ -65,10 +82,6 @@ static int tusb_set_sync_mode(unsigned sysclk_ps) memset(&dev_t, 0, sizeof(dev_t)); - dev_t.mux = true; - dev_t.sync_read = true; - dev_t.sync_write = true; - dev_t.clk = 11100; dev_t.t_bacc = 1000; dev_t.t_ces = 1000; @@ -84,7 +97,7 @@ static int tusb_set_sync_mode(unsigned sysclk_ps) dev_t.cyc_wpl = 6; dev_t.t_ce_rdyz = 7000; - gpmc_calc_timings(&t, &dev_t); + gpmc_calc_timings(&t, &tusb_sync, &dev_t); return gpmc_cs_set_timings(sync_cs, &t); } @@ -165,18 +178,12 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data, return status; } tusb_resources[0].end = tusb_resources[0].start + 0x9ff; + tusb_async.wait_pin = waitpin; async_cs = async; - gpmc_cs_write_reg(async, GPMC_CS_CONFIG1, - GPMC_CONFIG1_PAGE_LEN(2) - | GPMC_CONFIG1_WAIT_READ_MON - | GPMC_CONFIG1_WAIT_WRITE_MON - | GPMC_CONFIG1_WAIT_PIN_SEL(waitpin) - | GPMC_CONFIG1_READTYPE_ASYNC - | GPMC_CONFIG1_WRITETYPE_ASYNC - | GPMC_CONFIG1_DEVICESIZE_16 - | GPMC_CONFIG1_DEVICETYPE_NOR - | GPMC_CONFIG1_MUXADDDATA); + status = gpmc_cs_program_settings(async_cs, &tusb_async); + if (status < 0) + return status; /* SYNC region, primarily for DMA */ status = gpmc_cs_request(sync, SZ_16M, (unsigned long *) @@ -186,21 +193,12 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data, return status; } tusb_resources[1].end = tusb_resources[1].start + 0x9ff; + tusb_sync.wait_pin = waitpin; sync_cs = sync; - gpmc_cs_write_reg(sync, GPMC_CS_CONFIG1, - GPMC_CONFIG1_READMULTIPLE_SUPP - | GPMC_CONFIG1_READTYPE_SYNC - | GPMC_CONFIG1_WRITEMULTIPLE_SUPP - | GPMC_CONFIG1_WRITETYPE_SYNC - | GPMC_CONFIG1_PAGE_LEN(2) - | GPMC_CONFIG1_WAIT_READ_MON - | GPMC_CONFIG1_WAIT_WRITE_MON - | GPMC_CONFIG1_WAIT_PIN_SEL(waitpin) - | GPMC_CONFIG1_DEVICESIZE_16 - | GPMC_CONFIG1_DEVICETYPE_NOR - | GPMC_CONFIG1_MUXADDDATA - /* fclk divider gets set later */ - ); + + status = gpmc_cs_program_settings(sync_cs, &tusb_sync); + if (status < 0) + return status; /* IRQ */ status = gpio_request_one(irq, GPIOF_IN, "TUSB6010 irq"); diff --git a/arch/arm/mach-omap2/usb.h b/arch/arm/mach-omap2/usb.h index 3319f5c..e7261eb 100644 --- a/arch/arm/mach-omap2/usb.h +++ b/arch/arm/mach-omap2/usb.h @@ -53,8 +53,17 @@ #define USBPHY_OTGSESSEND_EN (1 << 20) #define USBPHY_DATA_POLARITY (1 << 23) +struct usbhs_phy_data { + int port; /* 1 indexed port number */ + int reset_gpio; + int vcc_gpio; + bool vcc_polarity; /* 1 active high, 0 active low */ + void *platform_data; +}; + extern void usb_musb_init(struct omap_musb_board_data *board_data); extern void usbhs_init(struct usbhs_omap_platform_data *pdata); +extern int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys); extern void am35x_musb_reset(void); extern void am35x_musb_phy_power(u8 on); diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index 0c5e4fb..0a8663c 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -407,6 +407,7 @@ config S3C2412_DMA config S3C2412_PM bool select S3C2412_PM_SLEEP + select SAMSUNG_WAKEMASK help Internal config node to apply S3C2412 power management diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile index af53d27..6f46ecf 100644 --- a/arch/arm/mach-s3c24xx/Makefile +++ b/arch/arm/mach-s3c24xx/Makefile @@ -14,7 +14,7 @@ obj- := # core -obj-y += common.o irq.o +obj-y += common.o obj-$(CONFIG_CPU_S3C2410) += s3c2410.o obj-$(CONFIG_S3C2410_CPUFREQ) += cpufreq-s3c2410.o @@ -22,7 +22,7 @@ obj-$(CONFIG_S3C2410_DMA) += dma-s3c2410.o obj-$(CONFIG_S3C2410_PLL) += pll-s3c2410.o obj-$(CONFIG_S3C2410_PM) += pm-s3c2410.o sleep-s3c2410.o -obj-$(CONFIG_CPU_S3C2412) += s3c2412.o irq-s3c2412.o clock-s3c2412.o +obj-$(CONFIG_CPU_S3C2412) += s3c2412.o clock-s3c2412.o obj-$(CONFIG_S3C2412_CPUFREQ) += cpufreq-s3c2412.o obj-$(CONFIG_S3C2412_DMA) += dma-s3c2412.o obj-$(CONFIG_S3C2412_PM) += pm-s3c2412.o @@ -31,9 +31,9 @@ obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep-s3c2412.o obj-$(CONFIG_CPU_S3C2416) += s3c2416.o clock-s3c2416.o obj-$(CONFIG_S3C2416_PM) += pm-s3c2416.o -obj-$(CONFIG_CPU_S3C2440) += s3c2440.o irq-s3c2440.o clock-s3c2440.o +obj-$(CONFIG_CPU_S3C2440) += s3c2440.o clock-s3c2440.o obj-$(CONFIG_CPU_S3C2442) += s3c2442.o -obj-$(CONFIG_CPU_S3C244X) += s3c244x.o irq-s3c244x.o clock-s3c244x.o +obj-$(CONFIG_CPU_S3C244X) += s3c244x.o clock-s3c244x.o obj-$(CONFIG_S3C2440_CPUFREQ) += cpufreq-s3c2440.o obj-$(CONFIG_S3C2440_DMA) += dma-s3c2440.o obj-$(CONFIG_S3C2440_PLL_12000000) += pll-s3c2440-12000000.o diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c24xx/common.h index 8a2b413..307c371 100644 --- a/arch/arm/mach-s3c24xx/common.h +++ b/arch/arm/mach-s3c24xx/common.h @@ -21,6 +21,7 @@ extern void s3c2410_map_io(void); extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no); extern void s3c2410_init_clocks(int xtal); extern void s3c2410_restart(char mode, const char *cmd); +extern void s3c2410_init_irq(void); #else #define s3c2410_init_clocks NULL #define s3c2410_init_uarts NULL @@ -36,6 +37,7 @@ extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no); extern void s3c2412_init_clocks(int xtal); extern int s3c2412_baseclk_add(void); extern void s3c2412_restart(char mode, const char *cmd); +extern void s3c2412_init_irq(void); #else #define s3c2412_init_clocks NULL #define s3c2412_init_uarts NULL @@ -73,6 +75,7 @@ extern void s3c244x_restart(char mode, const char *cmd); #ifdef CONFIG_CPU_S3C2440 extern int s3c2440_init(void); extern void s3c2440_map_io(void); +extern void s3c2440_init_irq(void); #else #define s3c2440_init NULL #define s3c2440_map_io NULL @@ -81,6 +84,7 @@ extern void s3c2440_map_io(void); #ifdef CONFIG_CPU_S3C2442 extern int s3c2442_init(void); extern void s3c2442_map_io(void); +extern void s3c2442_init_irq(void); #else #define s3c2442_init NULL #define s3c2442_map_io NULL diff --git a/arch/arm/mach-s3c24xx/include/mach/entry-macro.S b/arch/arm/mach-s3c24xx/include/mach/entry-macro.S deleted file mode 100644 index 6a21bee..0000000 --- a/arch/arm/mach-s3c24xx/include/mach/entry-macro.S +++ /dev/null @@ -1,70 +0,0 @@ -/* - * arch/arm/mach-s3c2410/include/mach/entry-macro.S - * - * Low-level IRQ helper macros for S3C2410-based platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. -*/ - -/* We have a problem that the INTOFFSET register does not always - * show one interrupt. Occasionally we get two interrupts through - * the prioritiser, and this causes the INTOFFSET register to show - * what looks like the logical-or of the two interrupt numbers. - * - * Thanks to Klaus, Shannon, et al for helping to debug this problem -*/ - -#define INTPND (0x10) -#define INTOFFSET (0x14) - -#include <mach/hardware.h> -#include <asm/irq.h> - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - - mov \base, #S3C24XX_VA_IRQ - - @@ try the interrupt offset register, since it is there - - ldr \irqstat, [\base, #INTPND ] - teq \irqstat, #0 - beq 1002f - ldr \irqnr, [\base, #INTOFFSET ] - mov \tmp, #1 - tst \irqstat, \tmp, lsl \irqnr - bne 1001f - - @@ the number specified is not a valid irq, so try - @@ and work it out for ourselves - - mov \irqnr, #0 @@ start here - - @@ work out which irq (if any) we got - - movs \tmp, \irqstat, lsl#16 - addeq \irqnr, \irqnr, #16 - moveq \irqstat, \irqstat, lsr#16 - tst \irqstat, #0xff - addeq \irqnr, \irqnr, #8 - moveq \irqstat, \irqstat, lsr#8 - tst \irqstat, #0xf - addeq \irqnr, \irqnr, #4 - moveq \irqstat, \irqstat, lsr#4 - tst \irqstat, #0x3 - addeq \irqnr, \irqnr, #2 - moveq \irqstat, \irqstat, lsr#2 - tst \irqstat, #0x1 - addeq \irqnr, \irqnr, #1 - - @@ we have the value -1001: - adds \irqnr, \irqnr, #IRQ_EINT0 -1002: - @@ exit here, Z flag unset if IRQ - - .endm diff --git a/arch/arm/mach-s3c24xx/include/mach/irqs.h b/arch/arm/mach-s3c24xx/include/mach/irqs.h index b7a9f4d..43cada8 100644 --- a/arch/arm/mach-s3c24xx/include/mach/irqs.h +++ b/arch/arm/mach-s3c24xx/include/mach/irqs.h @@ -59,49 +59,53 @@ #define IRQ_ADCPARENT S3C2410_IRQ(31) /* interrupts generated from the external interrupts sources */ -#define IRQ_EINT4 S3C2410_IRQ(32) /* 48 */ -#define IRQ_EINT5 S3C2410_IRQ(33) -#define IRQ_EINT6 S3C2410_IRQ(34) -#define IRQ_EINT7 S3C2410_IRQ(35) -#define IRQ_EINT8 S3C2410_IRQ(36) -#define IRQ_EINT9 S3C2410_IRQ(37) -#define IRQ_EINT10 S3C2410_IRQ(38) -#define IRQ_EINT11 S3C2410_IRQ(39) -#define IRQ_EINT12 S3C2410_IRQ(40) -#define IRQ_EINT13 S3C2410_IRQ(41) -#define IRQ_EINT14 S3C2410_IRQ(42) -#define IRQ_EINT15 S3C2410_IRQ(43) -#define IRQ_EINT16 S3C2410_IRQ(44) -#define IRQ_EINT17 S3C2410_IRQ(45) -#define IRQ_EINT18 S3C2410_IRQ(46) -#define IRQ_EINT19 S3C2410_IRQ(47) -#define IRQ_EINT20 S3C2410_IRQ(48) /* 64 */ -#define IRQ_EINT21 S3C2410_IRQ(49) -#define IRQ_EINT22 S3C2410_IRQ(50) -#define IRQ_EINT23 S3C2410_IRQ(51) +#define IRQ_EINT0_2412 S3C2410_IRQ(32) +#define IRQ_EINT1_2412 S3C2410_IRQ(33) +#define IRQ_EINT2_2412 S3C2410_IRQ(34) +#define IRQ_EINT3_2412 S3C2410_IRQ(35) +#define IRQ_EINT4 S3C2410_IRQ(36) /* 52 */ +#define IRQ_EINT5 S3C2410_IRQ(37) +#define IRQ_EINT6 S3C2410_IRQ(38) +#define IRQ_EINT7 S3C2410_IRQ(39) +#define IRQ_EINT8 S3C2410_IRQ(40) +#define IRQ_EINT9 S3C2410_IRQ(41) +#define IRQ_EINT10 S3C2410_IRQ(42) +#define IRQ_EINT11 S3C2410_IRQ(43) +#define IRQ_EINT12 S3C2410_IRQ(44) +#define IRQ_EINT13 S3C2410_IRQ(45) +#define IRQ_EINT14 S3C2410_IRQ(46) +#define IRQ_EINT15 S3C2410_IRQ(47) +#define IRQ_EINT16 S3C2410_IRQ(48) +#define IRQ_EINT17 S3C2410_IRQ(49) +#define IRQ_EINT18 S3C2410_IRQ(50) +#define IRQ_EINT19 S3C2410_IRQ(51) +#define IRQ_EINT20 S3C2410_IRQ(52) /* 68 */ +#define IRQ_EINT21 S3C2410_IRQ(53) +#define IRQ_EINT22 S3C2410_IRQ(54) +#define IRQ_EINT23 S3C2410_IRQ(55) #define IRQ_EINT_BIT(x) ((x) - IRQ_EINT4 + 4) #define IRQ_EINT(x) (((x) >= 4) ? (IRQ_EINT4 + (x) - 4) : (IRQ_EINT0 + (x))) -#define IRQ_LCD_FIFO S3C2410_IRQ(52) -#define IRQ_LCD_FRAME S3C2410_IRQ(53) +#define IRQ_LCD_FIFO S3C2410_IRQ(56) +#define IRQ_LCD_FRAME S3C2410_IRQ(57) /* IRQs for the interal UARTs, and ADC * these need to be ordered in number of appearance in the * SUBSRC mask register */ -#define S3C2410_IRQSUB(x) S3C2410_IRQ((x)+54) +#define S3C2410_IRQSUB(x) S3C2410_IRQ((x)+58) -#define IRQ_S3CUART_RX0 S3C2410_IRQSUB(0) /* 70 */ +#define IRQ_S3CUART_RX0 S3C2410_IRQSUB(0) /* 74 */ #define IRQ_S3CUART_TX0 S3C2410_IRQSUB(1) #define IRQ_S3CUART_ERR0 S3C2410_IRQSUB(2) -#define IRQ_S3CUART_RX1 S3C2410_IRQSUB(3) /* 73 */ +#define IRQ_S3CUART_RX1 S3C2410_IRQSUB(3) /* 77 */ #define IRQ_S3CUART_TX1 S3C2410_IRQSUB(4) #define IRQ_S3CUART_ERR1 S3C2410_IRQSUB(5) -#define IRQ_S3CUART_RX2 S3C2410_IRQSUB(6) /* 76 */ +#define IRQ_S3CUART_RX2 S3C2410_IRQSUB(6) /* 80 */ #define IRQ_S3CUART_TX2 S3C2410_IRQSUB(7) #define IRQ_S3CUART_ERR2 S3C2410_IRQSUB(8) @@ -136,7 +140,7 @@ /* second interrupt-register of s3c2416/s3c2450 */ -#define S3C2416_IRQ(x) S3C2410_IRQ((x) + 54 + 29) +#define S3C2416_IRQ(x) S3C2410_IRQ((x) + 58 + 29) #define IRQ_S3C2416_2D S3C2416_IRQ(0) #define IRQ_S3C2416_IIC1 S3C2416_IRQ(1) #define IRQ_S3C2416_RESERVED2 S3C2416_IRQ(2) diff --git a/arch/arm/mach-s3c24xx/irq-s3c2412.c b/arch/arm/mach-s3c24xx/irq-s3c2412.c deleted file mode 100644 index 67d7631..0000000 --- a/arch/arm/mach-s3c24xx/irq-s3c2412.c +++ /dev/null @@ -1,215 +0,0 @@ -/* linux/arch/arm/mach-s3c2412/irq.c - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/device.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <asm/irq.h> - -#include <asm/mach/irq.h> - -#include <mach/regs-irq.h> -#include <mach/regs-gpio.h> - -#include <plat/cpu.h> -#include <plat/irq.h> -#include <plat/pm.h> - -#include "s3c2412-power.h" - -#define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1) -#define INTMSK_SUB(start, end) (INTMSK(start, end) << ((start - S3C2410_IRQSUB(0)))) - -/* the s3c2412 changes the behaviour of IRQ_EINT0 through IRQ_EINT3 by - * having them turn up in both the INT* and the EINT* registers. Whilst - * both show the status, they both now need to be acked when the IRQs - * go off. -*/ - -static void -s3c2412_irq_mask(struct irq_data *data) -{ - unsigned long bitval = 1UL << (data->irq - IRQ_EINT0); - unsigned long mask; - - mask = __raw_readl(S3C2410_INTMSK); - __raw_writel(mask | bitval, S3C2410_INTMSK); - - mask = __raw_readl(S3C2412_EINTMASK); - __raw_writel(mask | bitval, S3C2412_EINTMASK); -} - -static inline void -s3c2412_irq_ack(struct irq_data *data) -{ - unsigned long bitval = 1UL << (data->irq - IRQ_EINT0); - - __raw_writel(bitval, S3C2412_EINTPEND); - __raw_writel(bitval, S3C2410_SRCPND); - __raw_writel(bitval, S3C2410_INTPND); -} - -static inline void -s3c2412_irq_maskack(struct irq_data *data) -{ - unsigned long bitval = 1UL << (data->irq - IRQ_EINT0); - unsigned long mask; - - mask = __raw_readl(S3C2410_INTMSK); - __raw_writel(mask|bitval, S3C2410_INTMSK); - - mask = __raw_readl(S3C2412_EINTMASK); - __raw_writel(mask | bitval, S3C2412_EINTMASK); - - __raw_writel(bitval, S3C2412_EINTPEND); - __raw_writel(bitval, S3C2410_SRCPND); - __raw_writel(bitval, S3C2410_INTPND); -} - -static void -s3c2412_irq_unmask(struct irq_data *data) -{ - unsigned long bitval = 1UL << (data->irq - IRQ_EINT0); - unsigned long mask; - - mask = __raw_readl(S3C2412_EINTMASK); - __raw_writel(mask & ~bitval, S3C2412_EINTMASK); - - mask = __raw_readl(S3C2410_INTMSK); - __raw_writel(mask & ~bitval, S3C2410_INTMSK); -} - -static struct irq_chip s3c2412_irq_eint0t4 = { - .irq_ack = s3c2412_irq_ack, - .irq_mask = s3c2412_irq_mask, - .irq_unmask = s3c2412_irq_unmask, - .irq_set_wake = s3c_irq_wake, - .irq_set_type = s3c_irqext_type, -}; - -#define INTBIT(x) (1 << ((x) - S3C2410_IRQSUB(0))) - -/* CF and SDI sub interrupts */ - -static void s3c2412_irq_demux_cfsdi(unsigned int irq, struct irq_desc *desc) -{ - unsigned int subsrc, submsk; - - subsrc = __raw_readl(S3C2410_SUBSRCPND); - submsk = __raw_readl(S3C2410_INTSUBMSK); - - subsrc &= ~submsk; - - if (subsrc & INTBIT(IRQ_S3C2412_SDI)) - generic_handle_irq(IRQ_S3C2412_SDI); - - if (subsrc & INTBIT(IRQ_S3C2412_CF)) - generic_handle_irq(IRQ_S3C2412_CF); -} - -#define INTMSK_CFSDI (1UL << (IRQ_S3C2412_CFSDI - IRQ_EINT0)) -#define SUBMSK_CFSDI INTMSK_SUB(IRQ_S3C2412_SDI, IRQ_S3C2412_CF) - -static void s3c2412_irq_cfsdi_mask(struct irq_data *data) -{ - s3c_irqsub_mask(data->irq, INTMSK_CFSDI, SUBMSK_CFSDI); -} - -static void s3c2412_irq_cfsdi_unmask(struct irq_data *data) -{ - s3c_irqsub_unmask(data->irq, INTMSK_CFSDI); -} - -static void s3c2412_irq_cfsdi_ack(struct irq_data *data) -{ - s3c_irqsub_maskack(data->irq, INTMSK_CFSDI, SUBMSK_CFSDI); -} - -static struct irq_chip s3c2412_irq_cfsdi = { - .name = "s3c2412-cfsdi", - .irq_ack = s3c2412_irq_cfsdi_ack, - .irq_mask = s3c2412_irq_cfsdi_mask, - .irq_unmask = s3c2412_irq_cfsdi_unmask, -}; - -static int s3c2412_irq_rtc_wake(struct irq_data *data, unsigned int state) -{ - unsigned long pwrcfg; - - pwrcfg = __raw_readl(S3C2412_PWRCFG); - if (state) - pwrcfg &= ~S3C2412_PWRCFG_RTC_MASKIRQ; - else - pwrcfg |= S3C2412_PWRCFG_RTC_MASKIRQ; - __raw_writel(pwrcfg, S3C2412_PWRCFG); - - return s3c_irq_chip.irq_set_wake(data, state); -} - -static struct irq_chip s3c2412_irq_rtc_chip; - -static int s3c2412_irq_add(struct device *dev, struct subsys_interface *sif) -{ - unsigned int irqno; - - for (irqno = IRQ_EINT0; irqno <= IRQ_EINT3; irqno++) { - irq_set_chip_and_handler(irqno, &s3c2412_irq_eint0t4, - handle_edge_irq); - set_irq_flags(irqno, IRQF_VALID); - } - - /* add demux support for CF/SDI */ - - irq_set_chained_handler(IRQ_S3C2412_CFSDI, s3c2412_irq_demux_cfsdi); - - for (irqno = IRQ_S3C2412_SDI; irqno <= IRQ_S3C2412_CF; irqno++) { - irq_set_chip_and_handler(irqno, &s3c2412_irq_cfsdi, - handle_level_irq); - set_irq_flags(irqno, IRQF_VALID); - } - - /* change RTC IRQ's set wake method */ - - s3c2412_irq_rtc_chip = s3c_irq_chip; - s3c2412_irq_rtc_chip.irq_set_wake = s3c2412_irq_rtc_wake; - - irq_set_chip(IRQ_RTC, &s3c2412_irq_rtc_chip); - - return 0; -} - -static struct subsys_interface s3c2412_irq_interface = { - .name = "s3c2412_irq", - .subsys = &s3c2412_subsys, - .add_dev = s3c2412_irq_add, -}; - -static int s3c2412_irq_init(void) -{ - return subsys_interface_register(&s3c2412_irq_interface); -} - -arch_initcall(s3c2412_irq_init); diff --git a/arch/arm/mach-s3c24xx/irq-s3c2440.c b/arch/arm/mach-s3c24xx/irq-s3c2440.c deleted file mode 100644 index 4a18cde..0000000 --- a/arch/arm/mach-s3c24xx/irq-s3c2440.c +++ /dev/null @@ -1,128 +0,0 @@ -/* linux/arch/arm/mach-s3c2440/irq.c - * - * Copyright (c) 2003-2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/device.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <asm/irq.h> - -#include <asm/mach/irq.h> - -#include <mach/regs-irq.h> -#include <mach/regs-gpio.h> - -#include <plat/cpu.h> -#include <plat/pm.h> -#include <plat/irq.h> - -/* WDT/AC97 */ - -static void s3c_irq_demux_wdtac97(unsigned int irq, - struct irq_desc *desc) -{ - unsigned int subsrc, submsk; - - /* read the current pending interrupts, and the mask - * for what it is available */ - - subsrc = __raw_readl(S3C2410_SUBSRCPND); - submsk = __raw_readl(S3C2410_INTSUBMSK); - - subsrc &= ~submsk; - subsrc >>= 13; - subsrc &= 3; - - if (subsrc != 0) { - if (subsrc & 1) { - generic_handle_irq(IRQ_S3C2440_WDT); - } - if (subsrc & 2) { - generic_handle_irq(IRQ_S3C2440_AC97); - } - } -} - - -#define INTMSK_WDT (1UL << (IRQ_WDT - IRQ_EINT0)) - -static void -s3c_irq_wdtac97_mask(struct irq_data *data) -{ - s3c_irqsub_mask(data->irq, INTMSK_WDT, 3 << 13); -} - -static void -s3c_irq_wdtac97_unmask(struct irq_data *data) -{ - s3c_irqsub_unmask(data->irq, INTMSK_WDT); -} - -static void -s3c_irq_wdtac97_ack(struct irq_data *data) -{ - s3c_irqsub_maskack(data->irq, INTMSK_WDT, 3 << 13); -} - -static struct irq_chip s3c_irq_wdtac97 = { - .irq_mask = s3c_irq_wdtac97_mask, - .irq_unmask = s3c_irq_wdtac97_unmask, - .irq_ack = s3c_irq_wdtac97_ack, -}; - -static int s3c2440_irq_add(struct device *dev, struct subsys_interface *sif) -{ - unsigned int irqno; - - printk("S3C2440: IRQ Support\n"); - - /* add new chained handler for wdt, ac7 */ - - irq_set_chip_and_handler(IRQ_WDT, &s3c_irq_level_chip, - handle_level_irq); - irq_set_chained_handler(IRQ_WDT, s3c_irq_demux_wdtac97); - - for (irqno = IRQ_S3C2440_WDT; irqno <= IRQ_S3C2440_AC97; irqno++) { - irq_set_chip_and_handler(irqno, &s3c_irq_wdtac97, - handle_level_irq); - set_irq_flags(irqno, IRQF_VALID); - } - - return 0; -} - -static struct subsys_interface s3c2440_irq_interface = { - .name = "s3c2440_irq", - .subsys = &s3c2440_subsys, - .add_dev = s3c2440_irq_add, -}; - -static int s3c2440_irq_init(void) -{ - return subsys_interface_register(&s3c2440_irq_interface); -} - -arch_initcall(s3c2440_irq_init); - diff --git a/arch/arm/mach-s3c24xx/irq-s3c244x.c b/arch/arm/mach-s3c24xx/irq-s3c244x.c deleted file mode 100644 index 5fe8e58..0000000 --- a/arch/arm/mach-s3c24xx/irq-s3c244x.c +++ /dev/null @@ -1,142 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/s3c244x-irq.c - * - * Copyright (c) 2003-2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/device.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <asm/irq.h> - -#include <asm/mach/irq.h> - -#include <mach/regs-irq.h> -#include <mach/regs-gpio.h> - -#include <plat/cpu.h> -#include <plat/pm.h> -#include <plat/irq.h> - -/* camera irq */ - -static void s3c_irq_demux_cam(unsigned int irq, - struct irq_desc *desc) -{ - unsigned int subsrc, submsk; - - /* read the current pending interrupts, and the mask - * for what it is available */ - - subsrc = __raw_readl(S3C2410_SUBSRCPND); - submsk = __raw_readl(S3C2410_INTSUBMSK); - - subsrc &= ~submsk; - subsrc >>= 11; - subsrc &= 3; - - if (subsrc != 0) { - if (subsrc & 1) { - generic_handle_irq(IRQ_S3C2440_CAM_C); - } - if (subsrc & 2) { - generic_handle_irq(IRQ_S3C2440_CAM_P); - } - } -} - -#define INTMSK_CAM (1UL << (IRQ_CAM - IRQ_EINT0)) - -static void -s3c_irq_cam_mask(struct irq_data *data) -{ - s3c_irqsub_mask(data->irq, INTMSK_CAM, 3 << 11); -} - -static void -s3c_irq_cam_unmask(struct irq_data *data) -{ - s3c_irqsub_unmask(data->irq, INTMSK_CAM); -} - -static void -s3c_irq_cam_ack(struct irq_data *data) -{ - s3c_irqsub_maskack(data->irq, INTMSK_CAM, 3 << 11); -} - -static struct irq_chip s3c_irq_cam = { - .irq_mask = s3c_irq_cam_mask, - .irq_unmask = s3c_irq_cam_unmask, - .irq_ack = s3c_irq_cam_ack, -}; - -static int s3c244x_irq_add(struct device *dev, struct subsys_interface *sif) -{ - unsigned int irqno; - - irq_set_chip_and_handler(IRQ_NFCON, &s3c_irq_level_chip, - handle_level_irq); - set_irq_flags(IRQ_NFCON, IRQF_VALID); - - /* add chained handler for camera */ - - irq_set_chip_and_handler(IRQ_CAM, &s3c_irq_level_chip, - handle_level_irq); - irq_set_chained_handler(IRQ_CAM, s3c_irq_demux_cam); - - for (irqno = IRQ_S3C2440_CAM_C; irqno <= IRQ_S3C2440_CAM_P; irqno++) { - irq_set_chip_and_handler(irqno, &s3c_irq_cam, - handle_level_irq); - set_irq_flags(irqno, IRQF_VALID); - } - - return 0; -} - -static struct subsys_interface s3c2440_irq_interface = { - .name = "s3c2440_irq", - .subsys = &s3c2440_subsys, - .add_dev = s3c244x_irq_add, -}; - -static int s3c2440_irq_init(void) -{ - return subsys_interface_register(&s3c2440_irq_interface); -} - -arch_initcall(s3c2440_irq_init); - -static struct subsys_interface s3c2442_irq_interface = { - .name = "s3c2442_irq", - .subsys = &s3c2442_subsys, - .add_dev = s3c244x_irq_add, -}; - - -static int s3c2442_irq_init(void) -{ - return subsys_interface_register(&s3c2442_irq_interface); -} - -arch_initcall(s3c2442_irq_init); diff --git a/arch/arm/mach-s3c24xx/mach-amlm5900.c b/arch/arm/mach-s3c24xx/mach-amlm5900.c index 432144c..e27b5c9 100644 --- a/arch/arm/mach-s3c24xx/mach-amlm5900.c +++ b/arch/arm/mach-s3c24xx/mach-amlm5900.c @@ -238,7 +238,7 @@ static void __init amlm5900_init(void) MACHINE_START(AML_M5900, "AML_M5900") .atag_offset = 0x100, .map_io = amlm5900_map_io, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2410_init_irq, .init_machine = amlm5900_init, .init_time = samsung_timer_init, .restart = s3c2410_restart, diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c index 24f1a04..c1fb6c3 100644 --- a/arch/arm/mach-s3c24xx/mach-anubis.c +++ b/arch/arm/mach-s3c24xx/mach-anubis.c @@ -445,7 +445,7 @@ MACHINE_START(ANUBIS, "Simtec-Anubis") .atag_offset = 0x100, .map_io = anubis_map_io, .init_machine = anubis_init, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2440_init_irq, .init_time = samsung_timer_init, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c index 2bf6c8c..6dfeeb7 100644 --- a/arch/arm/mach-s3c24xx/mach-at2440evb.c +++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c @@ -211,7 +211,7 @@ MACHINE_START(AT2440EVB, "AT2440EVB") .atag_offset = 0x100, .map_io = at2440evb_map_io, .init_machine = at2440evb_init, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2440_init_irq, .init_time = samsung_timer_init, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-bast.c b/arch/arm/mach-s3c24xx/mach-bast.c index eabe2db..22d6ae9 100644 --- a/arch/arm/mach-s3c24xx/mach-bast.c +++ b/arch/arm/mach-s3c24xx/mach-bast.c @@ -605,7 +605,7 @@ MACHINE_START(BAST, "Simtec-BAST") /* Maintainer: Ben Dooks <ben@simtec.co.uk> */ .atag_offset = 0x100, .map_io = bast_map_io, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2410_init_irq, .init_machine = bast_init, .init_time = samsung_timer_init, .restart = s3c2410_restart, diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c index 84a750d..13d8d07 100644 --- a/arch/arm/mach-s3c24xx/mach-gta02.c +++ b/arch/arm/mach-s3c24xx/mach-gta02.c @@ -589,7 +589,7 @@ MACHINE_START(NEO1973_GTA02, "GTA02") /* Maintainer: Nelson Castillo <arhuaco@freaks-unidos.net> */ .atag_offset = 0x100, .map_io = gta02_map_io, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2442_init_irq, .init_machine = gta02_machine_init, .init_time = samsung_timer_init, .restart = s3c244x_restart, diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c index 8dd6601..af4334d 100644 --- a/arch/arm/mach-s3c24xx/mach-h1940.c +++ b/arch/arm/mach-s3c24xx/mach-h1940.c @@ -667,11 +667,6 @@ static void __init h1940_reserve(void) memblock_reserve(0x30081000, 0x1000); } -static void __init h1940_init_irq(void) -{ - s3c24xx_init_irq(); -} - static void __init h1940_init(void) { u32 tmp; @@ -740,7 +735,7 @@ MACHINE_START(H1940, "IPAQ-H1940") .atag_offset = 0x100, .map_io = h1940_map_io, .reserve = h1940_reserve, - .init_irq = h1940_init_irq, + .init_irq = s3c2410_init_irq, .init_machine = h1940_init, .init_time = samsung_timer_init, .restart = s3c2410_restart, diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c index aade943..a45fcd8 100644 --- a/arch/arm/mach-s3c24xx/mach-jive.c +++ b/arch/arm/mach-s3c24xx/mach-jive.c @@ -660,7 +660,7 @@ MACHINE_START(JIVE, "JIVE") /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ .atag_offset = 0x100, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2412_init_irq, .map_io = jive_map_io, .init_machine = jive_machine_init, .init_time = samsung_timer_init, diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c index 29f106c..a83db46 100644 --- a/arch/arm/mach-s3c24xx/mach-mini2440.c +++ b/arch/arm/mach-s3c24xx/mach-mini2440.c @@ -688,7 +688,7 @@ MACHINE_START(MINI2440, "MINI2440") .atag_offset = 0x100, .map_io = mini2440_map_io, .init_machine = mini2440_init, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2440_init_irq, .init_time = samsung_timer_init, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c index 73a690f..2cb46c3 100644 --- a/arch/arm/mach-s3c24xx/mach-n30.c +++ b/arch/arm/mach-s3c24xx/mach-n30.c @@ -592,7 +592,7 @@ MACHINE_START(N30, "Acer-N30") .atag_offset = 0x100, .init_time = samsung_timer_init, .init_machine = n30_init, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2410_init_irq, .map_io = n30_map_io, .restart = s3c2410_restart, MACHINE_END @@ -603,7 +603,7 @@ MACHINE_START(N35, "Acer-N35") .atag_offset = 0x100, .init_time = samsung_timer_init, .init_machine = n30_init, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2410_init_irq, .map_io = n30_map_io, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-nexcoder.c b/arch/arm/mach-s3c24xx/mach-nexcoder.c index 5c826d1..01f4354 100644 --- a/arch/arm/mach-s3c24xx/mach-nexcoder.c +++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c @@ -152,7 +152,7 @@ MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440") .atag_offset = 0x100, .map_io = nexcoder_map_io, .init_machine = nexcoder_init, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2440_init_irq, .init_time = samsung_timer_init, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c index 4c90ffd..58d6fbe 100644 --- a/arch/arm/mach-s3c24xx/mach-osiris.c +++ b/arch/arm/mach-s3c24xx/mach-osiris.c @@ -426,7 +426,7 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS") /* Maintainer: Ben Dooks <ben@simtec.co.uk> */ .atag_offset = 0x100, .map_io = osiris_map_io, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2440_init_irq, .init_machine = osiris_init, .init_time = samsung_timer_init, .restart = s3c244x_restart, diff --git a/arch/arm/mach-s3c24xx/mach-otom.c b/arch/arm/mach-s3c24xx/mach-otom.c index 7b86707..7e16b07 100644 --- a/arch/arm/mach-s3c24xx/mach-otom.c +++ b/arch/arm/mach-s3c24xx/mach-otom.c @@ -116,7 +116,7 @@ MACHINE_START(OTOM, "Nex Vision - Otom 1.1") .atag_offset = 0x100, .map_io = otom11_map_io, .init_machine = otom11_init, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2410_init_irq, .init_time = samsung_timer_init, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c index 71cf29b..f8feaea 100644 --- a/arch/arm/mach-s3c24xx/mach-qt2410.c +++ b/arch/arm/mach-s3c24xx/mach-qt2410.c @@ -343,7 +343,7 @@ static void __init qt2410_machine_init(void) MACHINE_START(QT2410, "QT2410") .atag_offset = 0x100, .map_io = qt2410_map_io, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2410_init_irq, .init_machine = qt2410_machine_init, .init_time = samsung_timer_init, .restart = s3c2410_restart, diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c index 799af43..e4d67a3 100644 --- a/arch/arm/mach-s3c24xx/mach-rx1950.c +++ b/arch/arm/mach-s3c24xx/mach-rx1950.c @@ -813,7 +813,7 @@ MACHINE_START(RX1950, "HP iPAQ RX1950") .atag_offset = 0x100, .map_io = rx1950_map_io, .reserve = rx1950_reserve, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2442_init_irq, .init_machine = rx1950_init_machine, .init_time = samsung_timer_init, .restart = s3c244x_restart, diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c index 0a3c964..3bc6231 100644 --- a/arch/arm/mach-s3c24xx/mach-rx3715.c +++ b/arch/arm/mach-s3c24xx/mach-rx3715.c @@ -190,11 +190,6 @@ static void __init rx3715_reserve(void) memblock_reserve(0x30081000, 0x1000); } -static void __init rx3715_init_irq(void) -{ - s3c24xx_init_irq(); -} - static void __init rx3715_init_machine(void) { #ifdef CONFIG_PM_H1940 @@ -212,7 +207,7 @@ MACHINE_START(RX3715, "IPAQ-RX3715") .atag_offset = 0x100, .map_io = rx3715_map_io, .reserve = rx3715_reserve, - .init_irq = rx3715_init_irq, + .init_irq = s3c2440_init_irq, .init_machine = rx3715_init_machine, .init_time = samsung_timer_init, .restart = s3c244x_restart, diff --git a/arch/arm/mach-s3c24xx/mach-smdk2410.c b/arch/arm/mach-s3c24xx/mach-smdk2410.c index fd96f7f..a773789 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2410.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2410.c @@ -116,7 +116,7 @@ MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switc /* Maintainer: Jonas Dietsche */ .atag_offset = 0x100, .map_io = smdk2410_map_io, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2410_init_irq, .init_machine = smdk2410_init, .init_time = samsung_timer_init, .restart = s3c2410_restart, diff --git a/arch/arm/mach-s3c24xx/mach-smdk2413.c b/arch/arm/mach-s3c24xx/mach-smdk2413.c index 8e3f1d9..8146e92 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2413.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c @@ -130,7 +130,7 @@ MACHINE_START(S3C2413, "S3C2413") .atag_offset = 0x100, .fixup = smdk2413_fixup, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2412_init_irq, .map_io = smdk2413_map_io, .init_machine = smdk2413_machine_init, .init_time = samsung_timer_init, @@ -142,7 +142,7 @@ MACHINE_START(SMDK2412, "SMDK2412") .atag_offset = 0x100, .fixup = smdk2413_fixup, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2412_init_irq, .map_io = smdk2413_map_io, .init_machine = smdk2413_machine_init, .init_time = samsung_timer_init, @@ -154,7 +154,7 @@ MACHINE_START(SMDK2413, "SMDK2413") .atag_offset = 0x100, .fixup = smdk2413_fixup, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2412_init_irq, .map_io = smdk2413_map_io, .init_machine = smdk2413_machine_init, .init_time = samsung_timer_init, diff --git a/arch/arm/mach-s3c24xx/mach-smdk2440.c b/arch/arm/mach-s3c24xx/mach-smdk2440.c index f56cb08..de2e5d3 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2440.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2440.c @@ -177,7 +177,7 @@ MACHINE_START(S3C2440, "SMDK2440") /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ .atag_offset = 0x100, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2440_init_irq, .map_io = smdk2440_map_io, .init_machine = smdk2440_machine_init, .init_time = samsung_timer_init, diff --git a/arch/arm/mach-s3c24xx/mach-tct_hammer.c b/arch/arm/mach-s3c24xx/mach-tct_hammer.c index 31dfe58..7fad8f0 100644 --- a/arch/arm/mach-s3c24xx/mach-tct_hammer.c +++ b/arch/arm/mach-s3c24xx/mach-tct_hammer.c @@ -149,7 +149,7 @@ static void __init tct_hammer_init(void) MACHINE_START(TCT_HAMMER, "TCT_HAMMER") .atag_offset = 0x100, .map_io = tct_hammer_map_io, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2410_init_irq, .init_machine = tct_hammer_init, .init_time = samsung_timer_init, .restart = s3c2410_restart, diff --git a/arch/arm/mach-s3c24xx/mach-vr1000.c b/arch/arm/mach-s3c24xx/mach-vr1000.c index deeb8a0..42e7187 100644 --- a/arch/arm/mach-s3c24xx/mach-vr1000.c +++ b/arch/arm/mach-s3c24xx/mach-vr1000.c @@ -355,7 +355,7 @@ MACHINE_START(VR1000, "Thorcom-VR1000") .atag_offset = 0x100, .map_io = vr1000_map_io, .init_machine = vr1000_init, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2410_init_irq, .init_time = samsung_timer_init, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c index 622a1ed..b665884 100644 --- a/arch/arm/mach-s3c24xx/mach-vstms.c +++ b/arch/arm/mach-s3c24xx/mach-vstms.c @@ -158,7 +158,7 @@ MACHINE_START(VSTMS, "VSTMS") .atag_offset = 0x100, .fixup = vstms_fixup, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2412_init_irq, .init_machine = vstms_init, .map_io = vstms_map_io, .init_time = samsung_timer_init, diff --git a/arch/arm/mach-s3c24xx/pm-s3c2412.c b/arch/arm/mach-s3c24xx/pm-s3c2412.c index 4c4bc1c..d75f95e 100644 --- a/arch/arm/mach-s3c24xx/pm-s3c2412.c +++ b/arch/arm/mach-s3c24xx/pm-s3c2412.c @@ -29,6 +29,7 @@ #include <plat/cpu.h> #include <plat/pm.h> +#include <plat/wakeup-mask.h> #include "regs-dsc.h" #include "s3c2412-power.h" @@ -51,8 +52,15 @@ static int s3c2412_cpu_suspend(unsigned long arg) return 1; /* Aborting suspend */ } +/* mapping of interrupts to parts of the wakeup mask */ +static struct samsung_wakeup_mask wake_irqs[] = { + { .irq = IRQ_RTC, .bit = S3C2412_PWRCFG_RTC_MASKIRQ, }, +}; + static void s3c2412_pm_prepare(void) { + samsung_sync_wakemask(S3C2412_PWRCFG, + wake_irqs, ARRAY_SIZE(wake_irqs)); } static int s3c2412_pm_add(struct device *dev, struct subsys_interface *sif) diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 9255546..75d413c 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -16,6 +16,7 @@ config ARCH_SH73A0 select CPU_V7 select I2C select SH_CLK_CPG + select RENESAS_INTC_IRQPIN config ARCH_R8A7740 bool "R-Mobile A1 (R8A77400)" @@ -31,6 +32,7 @@ config ARCH_R8A7779 select SH_CLK_CPG select USB_ARCH_HAS_EHCI select USB_ARCH_HAS_OHCI + select RENESAS_INTC_IRQPIN config ARCH_EMEV2 bool "Emma Mobile EV2" diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index e1fac57..b646ff4 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -14,10 +14,9 @@ obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o clock-emev2.o # SMP objects smp-y := platsmp.o headsmp.o -smp-$(CONFIG_HOTPLUG_CPU) += hotplug.o -smp-$(CONFIG_ARCH_SH73A0) += smp-sh73a0.o headsmp-sh73a0.o -smp-$(CONFIG_ARCH_R8A7779) += smp-r8a7779.o -smp-$(CONFIG_ARCH_EMEV2) += smp-emev2.o +smp-$(CONFIG_ARCH_SH73A0) += smp-sh73a0.o headsmp-scu.o +smp-$(CONFIG_ARCH_R8A7779) += smp-r8a7779.o headsmp-scu.o +smp-$(CONFIG_ARCH_EMEV2) += smp-emev2.o headsmp-scu.o # IRQ objects obj-$(CONFIG_ARCH_SH7372) += entry-intc.o diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c index 7f3a6b7..d34d12a 100644 --- a/arch/arm/mach-shmobile/board-kzm9g.c +++ b/arch/arm/mach-shmobile/board-kzm9g.c @@ -81,7 +81,7 @@ static struct resource smsc9221_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = intcs_evt2irq(0x260), /* IRQ3 */ + .start = irq_pin(3), /* IRQ3 */ .flags = IORESOURCE_IRQ, }, }; @@ -115,7 +115,7 @@ static struct resource usb_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = intcs_evt2irq(0x220), /* IRQ1 */ + .start = irq_pin(1), /* IRQ1 */ .flags = IORESOURCE_IRQ, }, }; @@ -138,7 +138,7 @@ struct usbhs_private { struct renesas_usbhs_platform_info info; }; -#define IRQ15 intcs_evt2irq(0x03e0) +#define IRQ15 irq_pin(15) #define USB_PHY_MODE (1 << 4) #define USB_PHY_INT_EN ((1 << 3) | (1 << 2)) #define USB_PHY_ON (1 << 1) @@ -563,25 +563,25 @@ static struct i2c_board_info i2c0_devices[] = { }, { I2C_BOARD_INFO("ak8975", 0x0c), - .irq = intcs_evt2irq(0x3380), /* IRQ28 */ + .irq = irq_pin(28), /* IRQ28 */ }, { I2C_BOARD_INFO("adxl34x", 0x1d), - .irq = intcs_evt2irq(0x3340), /* IRQ26 */ + .irq = irq_pin(26), /* IRQ26 */ }, }; static struct i2c_board_info i2c1_devices[] = { { I2C_BOARD_INFO("st1232-ts", 0x55), - .irq = intcs_evt2irq(0x300), /* IRQ8 */ + .irq = irq_pin(8), /* IRQ8 */ }, }; static struct i2c_board_info i2c3_devices[] = { { I2C_BOARD_INFO("pcf8575", 0x20), - .irq = intcs_evt2irq(0x3260), /* IRQ19 */ + .irq = irq_pin(19), /* IRQ19 */ .platform_data = &pcf8575_pdata, }, }; diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c index 19ce885..1feb9a2 100644 --- a/arch/arm/mach-shmobile/clock-r8a7740.c +++ b/arch/arm/mach-shmobile/clock-r8a7740.c @@ -593,29 +593,42 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh_mobile_ceu.1", &mstp_clks[MSTP128]), CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), + CLKDEV_DEV_ID("e6c80000.sci", &mstp_clks[MSTP200]), CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP201]), + CLKDEV_DEV_ID("e6c70000.sci", &mstp_clks[MSTP201]), CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP202]), + CLKDEV_DEV_ID("e6c60000.sci", &mstp_clks[MSTP202]), CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), + CLKDEV_DEV_ID("e6c50000.sci", &mstp_clks[MSTP203]), CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), + CLKDEV_DEV_ID("e6c40000.sci", &mstp_clks[MSTP204]), CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]), + CLKDEV_DEV_ID("e6c30000.sci", &mstp_clks[MSTP206]), CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), + CLKDEV_DEV_ID("e6cb0000.sci", &mstp_clks[MSTP207]), CLKDEV_DEV_ID("sh-dma-engine.3", &mstp_clks[MSTP214]), CLKDEV_DEV_ID("sh-dma-engine.2", &mstp_clks[MSTP216]), CLKDEV_DEV_ID("sh-dma-engine.1", &mstp_clks[MSTP217]), CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]), CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP222]), + CLKDEV_DEV_ID("e6cd0000.sci", &mstp_clks[MSTP222]), CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP230]), + CLKDEV_DEV_ID("e6cc0000.sci", &mstp_clks[MSTP230]), CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP320]), CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), + CLKDEV_DEV_ID("e6850000.sdhi", &mstp_clks[MSTP314]), CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), + CLKDEV_DEV_ID("e6860000.sdhi", &mstp_clks[MSTP313]), CLKDEV_DEV_ID("sh_mmcif", &mstp_clks[MSTP312]), + CLKDEV_DEV_ID("e6bd0000.mmcif", &mstp_clks[MSTP312]), CLKDEV_DEV_ID("sh-eth", &mstp_clks[MSTP309]), CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP415]), + CLKDEV_DEV_ID("e6870000.sdhi", &mstp_clks[MSTP415]), /* ICK */ CLKDEV_ICK_ID("host", "renesas_usbhs", &mstp_clks[MSTP416]), diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c index 1db3653..d9edeaf 100644 --- a/arch/arm/mach-shmobile/clock-r8a7779.c +++ b/arch/arm/mach-shmobile/clock-r8a7779.c @@ -87,7 +87,8 @@ static struct clk div4_clks[DIV4_NR] = { }; enum { MSTP323, MSTP322, MSTP321, MSTP320, - MSTP101, MSTP100, + MSTP115, + MSTP103, MSTP101, MSTP100, MSTP030, MSTP029, MSTP028, MSTP027, MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021, MSTP016, MSTP015, MSTP014, @@ -99,6 +100,8 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP322] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 22, 0), /* SDHI1 */ [MSTP321] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 21, 0), /* SDHI2 */ [MSTP320] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 20, 0), /* SDHI3 */ + [MSTP115] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 15, 0), /* SATA */ + [MSTP103] = SH_CLK_MSTP32(&div4_clks[DIV4_S], MSTPCR1, 3, 0), /* DU */ [MSTP101] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 1, 0), /* USB2 */ [MSTP100] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 0, 0), /* USB0/1 */ [MSTP030] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 30, 0), /* I2C0 */ @@ -156,6 +159,8 @@ static struct clk_lookup lookups[] = { CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]), /* MSTP32 clocks */ + CLKDEV_DEV_ID("sata_rcar", &mstp_clks[MSTP115]), /* SATA */ + CLKDEV_DEV_ID("fc600000.sata", &mstp_clks[MSTP115]), /* SATA w/DT */ CLKDEV_DEV_ID("ehci-platform.1", &mstp_clks[MSTP101]), /* USB EHCI port2 */ CLKDEV_DEV_ID("ohci-platform.1", &mstp_clks[MSTP101]), /* USB OHCI port2 */ CLKDEV_DEV_ID("ehci-platform.0", &mstp_clks[MSTP100]), /* USB EHCI port0/1 */ @@ -180,6 +185,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP322]), /* SDHI1 */ CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP321]), /* SDHI2 */ CLKDEV_DEV_ID("sh_mobile_sdhi.3", &mstp_clks[MSTP320]), /* SDHI3 */ + CLKDEV_DEV_ID("rcar-du.0", &mstp_clks[MSTP103]), /* DU */ }; void __init r8a7779_clock_init(void) diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index afa5423..71843dd 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -265,12 +265,12 @@ enum { DIV4_I, DIV4_ZG, DIV4_M3, DIV4_B, DIV4_M1, DIV4_M2, static struct clk div4_clks[DIV4_NR] = { [DIV4_I] = DIV4(FRQCRA, 20, 0xdff, CLK_ENABLE_ON_INIT), - [DIV4_ZG] = DIV4(FRQCRA, 16, 0xd7f, CLK_ENABLE_ON_INIT), + [DIV4_ZG] = SH_CLK_DIV4(&pll0_clk, FRQCRA, 16, 0xd7f, CLK_ENABLE_ON_INIT), [DIV4_M3] = DIV4(FRQCRA, 12, 0x1dff, CLK_ENABLE_ON_INIT), [DIV4_B] = DIV4(FRQCRA, 8, 0xdff, CLK_ENABLE_ON_INIT), [DIV4_M1] = DIV4(FRQCRA, 4, 0x1dff, 0), [DIV4_M2] = DIV4(FRQCRA, 0, 0x1dff, 0), - [DIV4_Z] = DIV4(FRQCRB, 24, 0x97f, 0), + [DIV4_Z] = SH_CLK_DIV4(&pll0_clk, FRQCRB, 24, 0x97f, 0), [DIV4_ZTR] = DIV4(FRQCRB, 20, 0xdff, 0), [DIV4_ZT] = DIV4(FRQCRB, 16, 0xdff, 0), [DIV4_ZX] = DIV4(FRQCRB, 12, 0xdff, 0), @@ -581,10 +581,13 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("e6822000.i2c", &mstp_clks[MSTP323]), /* I2C1 */ CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP322]), /* USB */ CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */ + CLKDEV_DEV_ID("ee100000.sdhi", &mstp_clks[MSTP314]), /* SDHI0 */ CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */ + CLKDEV_DEV_ID("ee120000.sdhi", &mstp_clks[MSTP313]), /* SDHI1 */ CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMCIF0 */ CLKDEV_DEV_ID("e6bd0000.mmcif", &mstp_clks[MSTP312]), /* MMCIF0 */ CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP311]), /* SDHI2 */ + CLKDEV_DEV_ID("ee140000.sdhi", &mstp_clks[MSTP311]), /* SDHI2 */ CLKDEV_DEV_ID("leds-renesas-tpu.12", &mstp_clks[MSTP303]), /* TPU1 */ CLKDEV_DEV_ID("leds-renesas-tpu.21", &mstp_clks[MSTP302]), /* TPU2 */ CLKDEV_DEV_ID("leds-renesas-tpu.30", &mstp_clks[MSTP301]), /* TPU3 */ diff --git a/arch/arm/mach-shmobile/headsmp-sh73a0.S b/arch/arm/mach-shmobile/headsmp-scu.S index bec4c0d..7d113f8 100644 --- a/arch/arm/mach-shmobile/headsmp-sh73a0.S +++ b/arch/arm/mach-shmobile/headsmp-scu.S @@ -1,5 +1,5 @@ /* - * SMP support for SoC sh73a0 + * Shared SCU setup for mach-shmobile * * Copyright (C) 2012 Bastian Hecht * @@ -35,11 +35,12 @@ * the physical address as the MMU is still turned off. */ .align 12 -ENTRY(sh73a0_secondary_vector) +ENTRY(shmobile_secondary_vector_scu) mrc p15, 0, r0, c0, c0, 5 @ read MIPDR and r0, r0, #3 @ mask out cpu ID lsl r0, r0, #3 @ we will shift by cpu_id * 8 bits - mov r1, #0xf0000000 @ SCU base address + ldr r1, 2f + ldr r1, [r1] @ SCU base address ldr r2, [r1, #8] @ SCU Power Status Register mov r3, #3 bic r2, r2, r3, lsl r0 @ Clear bits of our CPU (Run Mode) @@ -47,4 +48,10 @@ ENTRY(sh73a0_secondary_vector) ldr pc, 1f 1: .long shmobile_invalidate_start - PAGE_OFFSET + PLAT_PHYS_OFFSET -ENDPROC(sh73a0_secondary_vector) +2: .long shmobile_scu_base - PAGE_OFFSET + PLAT_PHYS_OFFSET +ENDPROC(shmobile_secondary_vector_scu) + + .text + .globl shmobile_scu_base +shmobile_scu_base: + .space 4 diff --git a/arch/arm/mach-shmobile/hotplug.c b/arch/arm/mach-shmobile/hotplug.c deleted file mode 100644 index a1524e3..0000000 --- a/arch/arm/mach-shmobile/hotplug.c +++ /dev/null @@ -1,68 +0,0 @@ -/* - * SMP support for R-Mobile / SH-Mobile - * - * Copyright (C) 2010 Magnus Damm - * - * Based on realview, Copyright (C) 2002 ARM Ltd, All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/smp.h> -#include <linux/cpumask.h> -#include <linux/delay.h> -#include <linux/of.h> -#include <mach/common.h> -#include <mach/r8a7779.h> -#include <mach/emev2.h> -#include <asm/cacheflush.h> -#include <asm/mach-types.h> - -static cpumask_t dead_cpus; - -void shmobile_cpu_die(unsigned int cpu) -{ - /* hardware shutdown code running on the CPU that is being offlined */ - flush_cache_all(); - dsb(); - - /* notify platform_cpu_kill() that hardware shutdown is finished */ - cpumask_set_cpu(cpu, &dead_cpus); - - /* wait for SoC code in platform_cpu_kill() to shut off CPU core - * power. CPU bring up starts from the reset vector. - */ - while (1) { - /* - * here's the WFI - */ - asm(".word 0xe320f003\n" - : - : - : "memory", "cc"); - } -} - -int shmobile_cpu_disable(unsigned int cpu) -{ - cpumask_clear_cpu(cpu, &dead_cpus); - /* - * we don't allow CPU 0 to be shutdown (it is still too special - * e.g. clock tick interrupts) - */ - return cpu == 0 ? -EPERM : 0; -} - -int shmobile_cpu_disable_any(unsigned int cpu) -{ - cpumask_clear_cpu(cpu, &dead_cpus); - return 0; -} - -int shmobile_cpu_is_dead(unsigned int cpu) -{ - return cpumask_test_cpu(cpu, &dead_cpus); -} diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h index e48606d..03f73de 100644 --- a/arch/arm/mach-shmobile/include/mach/common.h +++ b/arch/arm/mach-shmobile/include/mach/common.h @@ -8,6 +8,7 @@ extern void shmobile_setup_delay(unsigned int max_cpu_core_mhz, struct twd_local_timer; extern void shmobile_setup_console(void); extern void shmobile_secondary_vector(void); +extern void shmobile_secondary_vector_scu(void); struct clk; extern int shmobile_clk_init(void); extern void shmobile_handle_irq_intc(struct pt_regs *); @@ -33,23 +34,23 @@ extern int sh7372_do_idle_sysc(unsigned long sleep_mode); extern struct clk sh7372_extal1_clk; extern struct clk sh7372_extal2_clk; +extern void sh73a0_init_delay(void); extern void sh73a0_init_irq(void); extern void sh73a0_init_irq_dt(void); extern void sh73a0_map_io(void); extern void sh73a0_earlytimer_init(void); extern void sh73a0_add_early_devices(void); -extern void sh73a0_add_early_devices_dt(void); extern void sh73a0_add_standard_devices(void); extern void sh73a0_add_standard_devices_dt(void); extern void sh73a0_clock_init(void); extern void sh73a0_pinmux_init(void); extern void sh73a0_pm_init(void); -extern void sh73a0_secondary_vector(void); extern struct clk sh73a0_extal1_clk; extern struct clk sh73a0_extal2_clk; extern struct clk sh73a0_extcki_clk; extern struct clk sh73a0_extalr_clk; +extern void r8a7740_meram_workaround(void); extern void r8a7740_init_irq(void); extern void r8a7740_map_io(void); extern void r8a7740_add_early_devices(void); @@ -58,16 +59,18 @@ extern void r8a7740_clock_init(u8 md_ck); extern void r8a7740_pinmux_init(void); extern void r8a7740_pm_init(void); +extern void r8a7779_init_delay(void); extern void r8a7779_init_irq(void); +extern void r8a7779_init_irq_extpin(int irlm); +extern void r8a7779_init_irq_dt(void); extern void r8a7779_map_io(void); extern void r8a7779_earlytimer_init(void); extern void r8a7779_add_early_devices(void); extern void r8a7779_add_standard_devices(void); +extern void r8a7779_add_standard_devices_dt(void); extern void r8a7779_clock_init(void); extern void r8a7779_pinmux_init(void); extern void r8a7779_pm_init(void); -extern void r8a7740_meram_workaround(void); - extern void r8a7779_register_twd(void); #ifdef CONFIG_SUSPEND @@ -82,16 +85,7 @@ int shmobile_cpuidle_init(void); static inline int shmobile_cpuidle_init(void) { return 0; } #endif -extern void shmobile_cpu_die(unsigned int cpu); -extern int shmobile_cpu_disable(unsigned int cpu); -extern int shmobile_cpu_disable_any(unsigned int cpu); - -#ifdef CONFIG_HOTPLUG_CPU -extern int shmobile_cpu_is_dead(unsigned int cpu); -#else -static inline int shmobile_cpu_is_dead(unsigned int cpu) { return 1; } -#endif - +extern void __iomem *shmobile_scu_base; extern void shmobile_smp_init_cpus(unsigned int ncores); static inline void __init shmobile_init_late(void) diff --git a/arch/arm/mach-shmobile/include/mach/irqs.h b/arch/arm/mach-shmobile/include/mach/irqs.h index 06a5da3..b2074e2 100644 --- a/arch/arm/mach-shmobile/include/mach/irqs.h +++ b/arch/arm/mach-shmobile/include/mach/irqs.h @@ -5,10 +5,15 @@ /* GIC */ #define gic_spi(nr) ((nr) + 32) +#define gic_iid(nr) (nr) /* ICCIAR / interrupt ID */ /* INTCS */ #define INTCS_VECT_BASE 0x3400 #define INTCS_VECT(n, vect) INTC_VECT((n), INTCS_VECT_BASE + (vect)) #define intcs_evt2irq(evt) evt2irq(INTCS_VECT_BASE + (evt)) +/* External IRQ pins */ +#define IRQPIN_BASE 2000 +#define irq_pin(nr) ((nr) + IRQPIN_BASE) + #endif /* __ASM_MACH_IRQS_H */ diff --git a/arch/arm/mach-shmobile/intc-r8a7779.c b/arch/arm/mach-shmobile/intc-r8a7779.c index 8807c27..b86dc89 100644 --- a/arch/arm/mach-shmobile/intc-r8a7779.c +++ b/arch/arm/mach-shmobile/intc-r8a7779.c @@ -19,12 +19,16 @@ */ #include <linux/kernel.h> #include <linux/init.h> +#include <linux/platform_device.h> #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/io.h> #include <linux/irqchip/arm-gic.h> +#include <linux/platform_data/irq-renesas-intc-irqpin.h> +#include <linux/irqchip.h> #include <mach/common.h> #include <mach/intc.h> +#include <mach/irqs.h> #include <mach/r8a7779.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -38,18 +42,61 @@ #define INT2NTSR0 IOMEM(0xfe700060) #define INT2NTSR1 IOMEM(0xfe700064) +static struct renesas_intc_irqpin_config irqpin0_platform_data = { + .irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */ + .sense_bitfield_width = 2, +}; + +static struct resource irqpin0_resources[] = { + DEFINE_RES_MEM(0xfe78001c, 4), /* ICR1 */ + DEFINE_RES_MEM(0xfe780010, 4), /* INTPRI */ + DEFINE_RES_MEM(0xfe780024, 4), /* INTREQ */ + DEFINE_RES_MEM(0xfe780044, 4), /* INTMSK0 */ + DEFINE_RES_MEM(0xfe780064, 4), /* INTMSKCLR0 */ + DEFINE_RES_IRQ(gic_spi(27)), /* IRQ0 */ + DEFINE_RES_IRQ(gic_spi(28)), /* IRQ1 */ + DEFINE_RES_IRQ(gic_spi(29)), /* IRQ2 */ + DEFINE_RES_IRQ(gic_spi(30)), /* IRQ3 */ +}; + +static struct platform_device irqpin0_device = { + .name = "renesas_intc_irqpin", + .id = 0, + .resource = irqpin0_resources, + .num_resources = ARRAY_SIZE(irqpin0_resources), + .dev = { + .platform_data = &irqpin0_platform_data, + }, +}; + +void __init r8a7779_init_irq_extpin(int irlm) +{ + void __iomem *icr0 = ioremap_nocache(0xfe780000, PAGE_SIZE); + unsigned long tmp; + + if (icr0) { + tmp = ioread32(icr0); + if (irlm) + tmp |= 1 << 23; /* IRQ0 -> IRQ3 as individual pins */ + else + tmp &= ~(1 << 23); /* IRL mode - not supported */ + tmp |= (1 << 21); /* LVLMODE = 1 */ + iowrite32(tmp, icr0); + iounmap(icr0); + + if (irlm) + platform_device_register(&irqpin0_device); + } else + pr_warn("r8a7779: unable to setup external irq pin mode\n"); +} + static int r8a7779_set_wake(struct irq_data *data, unsigned int on) { return 0; /* always allow wakeup */ } -void __init r8a7779_init_irq(void) +static void __init r8a7779_init_irq_common(void) { - void __iomem *gic_dist_base = IOMEM(0xf0001000); - void __iomem *gic_cpu_base = IOMEM(0xf0000100); - - /* use GIC to handle interrupts */ - gic_init(0, 29, gic_dist_base, gic_cpu_base); gic_arch_extn.irq_set_wake = r8a7779_set_wake; /* route all interrupts to ARM */ @@ -63,3 +110,22 @@ void __init r8a7779_init_irq(void) __raw_writel(0xbffffffc, INT2SMSKCR3); __raw_writel(0x003fee3f, INT2SMSKCR4); } + +void __init r8a7779_init_irq(void) +{ + void __iomem *gic_dist_base = IOMEM(0xf0001000); + void __iomem *gic_cpu_base = IOMEM(0xf0000100); + + /* use GIC to handle interrupts */ + gic_init(0, 29, gic_dist_base, gic_cpu_base); + + r8a7779_init_irq_common(); +} + +#ifdef CONFIG_OF +void __init r8a7779_init_irq_dt(void) +{ + irqchip_init(); + r8a7779_init_irq_common(); +} +#endif diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c index 91faba6..19a26f4 100644 --- a/arch/arm/mach-shmobile/intc-sh73a0.c +++ b/arch/arm/mach-shmobile/intc-sh73a0.c @@ -260,108 +260,6 @@ static int sh73a0_set_wake(struct irq_data *data, unsigned int on) return 0; /* always allow wakeup */ } -#define RELOC_BASE 0x1200 - -/* INTCA IRQ pins at INTCS + RELOC_BASE to make space for GIC+INTC handling */ -#define INTCS_VECT_RELOC(n, vect) INTCS_VECT((n), (vect) + RELOC_BASE) - -INTC_IRQ_PINS_32(intca_irq_pins, 0xe6900000, - INTCS_VECT_RELOC, "sh73a0-intca-irq-pins"); - -static int to_gic_irq(struct irq_data *data) -{ - unsigned int vect = irq2evt(data->irq) - INTCS_VECT_BASE; - - if (vect >= 0x3200) - vect -= 0x3000; - else - vect -= 0x0200; - - return gic_spi((vect >> 5) + 1); -} - -static int to_intca_reloc_irq(struct irq_data *data) -{ - return data->irq + (RELOC_BASE >> 5); -} - -#define irq_cb(cb, irq) irq_get_chip(irq)->cb(irq_get_irq_data(irq)) -#define irq_cbp(cb, irq, p...) irq_get_chip(irq)->cb(irq_get_irq_data(irq), p) - -static void intca_gic_enable(struct irq_data *data) -{ - irq_cb(irq_unmask, to_intca_reloc_irq(data)); - irq_cb(irq_unmask, to_gic_irq(data)); -} - -static void intca_gic_disable(struct irq_data *data) -{ - irq_cb(irq_mask, to_gic_irq(data)); - irq_cb(irq_mask, to_intca_reloc_irq(data)); -} - -static void intca_gic_mask_ack(struct irq_data *data) -{ - irq_cb(irq_mask, to_gic_irq(data)); - irq_cb(irq_mask_ack, to_intca_reloc_irq(data)); -} - -static void intca_gic_eoi(struct irq_data *data) -{ - irq_cb(irq_eoi, to_gic_irq(data)); -} - -static int intca_gic_set_type(struct irq_data *data, unsigned int type) -{ - return irq_cbp(irq_set_type, to_intca_reloc_irq(data), type); -} - -#ifdef CONFIG_SMP -static int intca_gic_set_affinity(struct irq_data *data, - const struct cpumask *cpumask, - bool force) -{ - return irq_cbp(irq_set_affinity, to_gic_irq(data), cpumask, force); -} -#endif - -struct irq_chip intca_gic_irq_chip = { - .name = "INTCA-GIC", - .irq_mask = intca_gic_disable, - .irq_unmask = intca_gic_enable, - .irq_mask_ack = intca_gic_mask_ack, - .irq_eoi = intca_gic_eoi, - .irq_enable = intca_gic_enable, - .irq_disable = intca_gic_disable, - .irq_shutdown = intca_gic_disable, - .irq_set_type = intca_gic_set_type, - .irq_set_wake = sh73a0_set_wake, -#ifdef CONFIG_SMP - .irq_set_affinity = intca_gic_set_affinity, -#endif -}; - -static int to_intc_vect(int irq) -{ - unsigned int irq_pin = irq - gic_spi(1); - unsigned int offs; - - if (irq_pin < 16) - offs = 0x0200; - else - offs = 0x3000; - - return offs + (irq_pin << 5); -} - -static irqreturn_t sh73a0_irq_pin_demux(int irq, void *dev_id) -{ - generic_handle_irq(intcs_evt2irq(to_intc_vect(irq))); - return IRQ_HANDLED; -} - -static struct irqaction sh73a0_irq_pin_cascade[32]; - #define PINTER0_PHYS 0xe69000a0 #define PINTER1_PHYS 0xe69000a4 #define PINTER0_VIRT IOMEM(0xe69000a0) @@ -422,13 +320,11 @@ void __init sh73a0_init_irq(void) void __iomem *gic_dist_base = IOMEM(0xf0001000); void __iomem *gic_cpu_base = IOMEM(0xf0000100); void __iomem *intevtsa = ioremap_nocache(0xffd20100, PAGE_SIZE); - int k, n; gic_init(0, 29, gic_dist_base, gic_cpu_base); gic_arch_extn.irq_set_wake = sh73a0_set_wake; register_intc_controller(&intcs_desc); - register_intc_controller(&intca_irq_pins_desc); register_intc_controller(&intc_pint0_desc); register_intc_controller(&intc_pint1_desc); @@ -438,19 +334,6 @@ void __init sh73a0_init_irq(void) sh73a0_intcs_cascade.dev_id = intevtsa; setup_irq(gic_spi(50), &sh73a0_intcs_cascade); - /* IRQ pins require special handling through INTCA and GIC */ - for (k = 0; k < 32; k++) { - sh73a0_irq_pin_cascade[k].name = "INTCA-GIC cascade"; - sh73a0_irq_pin_cascade[k].handler = sh73a0_irq_pin_demux; - setup_irq(gic_spi(1 + k), &sh73a0_irq_pin_cascade[k]); - - n = intcs_evt2irq(to_intc_vect(gic_spi(1 + k))); - WARN_ON(irq_alloc_desc_at(n, numa_node_id()) != n); - irq_set_chip_and_handler_name(n, &intca_gic_irq_chip, - handle_level_irq, "level"); - set_irq_flags(n, IRQF_VALID); /* yuck */ - } - /* PINT pins are sanely tied to the GIC as SPI */ sh73a0_pint0_cascade.name = "PINT0 cascade"; sh73a0_pint0_cascade.handler = sh73a0_pint0_demux; @@ -460,11 +343,3 @@ void __init sh73a0_init_irq(void) sh73a0_pint1_cascade.handler = sh73a0_pint1_demux; setup_irq(gic_spi(34), &sh73a0_pint1_cascade); } - -#ifdef CONFIG_OF -void __init sh73a0_init_irq_dt(void) -{ - irqchip_init(); - gic_arch_extn.irq_set_wake = sh73a0_set_wake; -} -#endif diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c index 47662a5..e4545c1 100644 --- a/arch/arm/mach-shmobile/setup-emev2.c +++ b/arch/arm/mach-shmobile/setup-emev2.c @@ -404,7 +404,7 @@ void __init emev2_add_standard_devices(void) ARRAY_SIZE(emev2_late_devices)); } -void __init emev2_init_delay(void) +static void __init emev2_init_delay(void) { shmobile_setup_delay(533, 1, 3); /* Cortex-A9 @ 533MHz */ } @@ -439,7 +439,7 @@ static const struct of_dev_auxdata emev2_auxdata_lookup[] __initconst = { { } }; -void __init emev2_add_standard_devices_dt(void) +static void __init emev2_add_standard_devices_dt(void) { of_platform_populate(NULL, of_default_bus_match_table, emev2_auxdata_lookup, NULL); diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c index c54ff9b..042df35 100644 --- a/arch/arm/mach-shmobile/setup-r8a7779.c +++ b/arch/arm/mach-shmobile/setup-r8a7779.c @@ -21,6 +21,7 @@ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/of_platform.h> #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/input.h> @@ -28,6 +29,7 @@ #include <linux/serial_sci.h> #include <linux/sh_intc.h> #include <linux/sh_timer.h> +#include <linux/dma-mapping.h> #include <mach/hardware.h> #include <mach/irqs.h> #include <mach/r8a7779.h> @@ -91,7 +93,7 @@ static struct plat_sci_port scif0_platform_data = { .scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE1, .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, - .irqs = SCIx_IRQ_MUXED(gic_spi(88)), + .irqs = SCIx_IRQ_MUXED(gic_iid(0x78)), }; static struct platform_device scif0_device = { @@ -108,7 +110,7 @@ static struct plat_sci_port scif1_platform_data = { .scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE1, .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, - .irqs = SCIx_IRQ_MUXED(gic_spi(89)), + .irqs = SCIx_IRQ_MUXED(gic_iid(0x79)), }; static struct platform_device scif1_device = { @@ -125,7 +127,7 @@ static struct plat_sci_port scif2_platform_data = { .scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE1, .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, - .irqs = SCIx_IRQ_MUXED(gic_spi(90)), + .irqs = SCIx_IRQ_MUXED(gic_iid(0x7a)), }; static struct platform_device scif2_device = { @@ -142,7 +144,7 @@ static struct plat_sci_port scif3_platform_data = { .scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE1, .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, - .irqs = SCIx_IRQ_MUXED(gic_spi(91)), + .irqs = SCIx_IRQ_MUXED(gic_iid(0x7b)), }; static struct platform_device scif3_device = { @@ -159,7 +161,7 @@ static struct plat_sci_port scif4_platform_data = { .scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE1, .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, - .irqs = SCIx_IRQ_MUXED(gic_spi(92)), + .irqs = SCIx_IRQ_MUXED(gic_iid(0x7c)), }; static struct platform_device scif4_device = { @@ -176,7 +178,7 @@ static struct plat_sci_port scif5_platform_data = { .scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE1, .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, - .irqs = SCIx_IRQ_MUXED(gic_spi(93)), + .irqs = SCIx_IRQ_MUXED(gic_iid(0x7d)), }; static struct platform_device scif5_device = { @@ -203,7 +205,7 @@ static struct resource tmu00_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gic_spi(32), + .start = gic_iid(0x40), .flags = IORESOURCE_IRQ, }, }; @@ -233,7 +235,7 @@ static struct resource tmu01_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gic_spi(33), + .start = gic_iid(0x41), .flags = IORESOURCE_IRQ, }, }; @@ -255,7 +257,7 @@ static struct resource rcar_i2c0_res[] = { .end = 0xffc70fff, .flags = IORESOURCE_MEM, }, { - .start = gic_spi(79), + .start = gic_iid(0x6f), .flags = IORESOURCE_IRQ, }, }; @@ -273,7 +275,7 @@ static struct resource rcar_i2c1_res[] = { .end = 0xffc71fff, .flags = IORESOURCE_MEM, }, { - .start = gic_spi(82), + .start = gic_iid(0x72), .flags = IORESOURCE_IRQ, }, }; @@ -291,7 +293,7 @@ static struct resource rcar_i2c2_res[] = { .end = 0xffc72fff, .flags = IORESOURCE_MEM, }, { - .start = gic_spi(80), + .start = gic_iid(0x70), .flags = IORESOURCE_IRQ, }, }; @@ -309,7 +311,7 @@ static struct resource rcar_i2c3_res[] = { .end = 0xffc73fff, .flags = IORESOURCE_MEM, }, { - .start = gic_spi(81), + .start = gic_iid(0x71), .flags = IORESOURCE_IRQ, }, }; @@ -321,7 +323,31 @@ static struct platform_device i2c3_device = { .num_resources = ARRAY_SIZE(rcar_i2c3_res), }; -static struct platform_device *r8a7779_early_devices[] __initdata = { +static struct resource sata_resources[] = { + [0] = { + .name = "rcar-sata", + .start = 0xfc600000, + .end = 0xfc601fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = gic_iid(0x84), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sata_device = { + .name = "sata_rcar", + .id = -1, + .resource = sata_resources, + .num_resources = ARRAY_SIZE(sata_resources), + .dev = { + .dma_mask = &sata_device.dev.coherent_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +static struct platform_device *r8a7779_devices_dt[] __initdata = { &scif0_device, &scif1_device, &scif2_device, @@ -330,13 +356,14 @@ static struct platform_device *r8a7779_early_devices[] __initdata = { &scif5_device, &tmu00_device, &tmu01_device, +}; + +static struct platform_device *r8a7779_late_devices[] __initdata = { &i2c0_device, &i2c1_device, &i2c2_device, &i2c3_device, -}; - -static struct platform_device *r8a7779_late_devices[] __initdata = { + &sata_device, }; void __init r8a7779_add_standard_devices(void) @@ -349,8 +376,8 @@ void __init r8a7779_add_standard_devices(void) r8a7779_init_pm_domains(); - platform_add_devices(r8a7779_early_devices, - ARRAY_SIZE(r8a7779_early_devices)); + platform_add_devices(r8a7779_devices_dt, + ARRAY_SIZE(r8a7779_devices_dt)); platform_add_devices(r8a7779_late_devices, ARRAY_SIZE(r8a7779_late_devices)); } @@ -367,8 +394,8 @@ void __init r8a7779_earlytimer_init(void) void __init r8a7779_add_early_devices(void) { - early_platform_add_devices(r8a7779_early_devices, - ARRAY_SIZE(r8a7779_early_devices)); + early_platform_add_devices(r8a7779_devices_dt, + ARRAY_SIZE(r8a7779_devices_dt)); /* Early serial console setup is not included here due to * memory map collisions. The SCIF serial ports in r8a7779 @@ -386,3 +413,40 @@ void __init r8a7779_add_early_devices(void) * command line in case of the marzen board. */ } + +#ifdef CONFIG_USE_OF +void __init r8a7779_init_delay(void) +{ + shmobile_setup_delay(1000, 2, 4); /* Cortex-A9 @ 1000MHz */ +} + +static const struct of_dev_auxdata r8a7779_auxdata_lookup[] __initconst = { + {}, +}; + +void __init r8a7779_add_standard_devices_dt(void) +{ + /* clocks are setup late during boot in the case of DT */ + r8a7779_clock_init(); + + platform_add_devices(r8a7779_devices_dt, + ARRAY_SIZE(r8a7779_devices_dt)); + of_platform_populate(NULL, of_default_bus_match_table, + r8a7779_auxdata_lookup, NULL); +} + +static const char *r8a7779_compat_dt[] __initdata = { + "renesas,r8a7779", + NULL, +}; + +DT_MACHINE_START(R8A7779_DT, "Generic R8A7779 (Flattened Device Tree)") + .map_io = r8a7779_map_io, + .init_early = r8a7779_init_delay, + .nr_irqs = NR_IRQS_LEGACY, + .init_irq = r8a7779_init_irq_dt, + .init_machine = r8a7779_add_standard_devices_dt, + .init_time = shmobile_timer_init, + .dt_compat = r8a7779_compat_dt, +MACHINE_END +#endif /* CONFIG_USE_OF */ diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c index bdab575..e8cd93a 100644 --- a/arch/arm/mach-shmobile/setup-sh73a0.c +++ b/arch/arm/mach-shmobile/setup-sh73a0.c @@ -22,6 +22,7 @@ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/irqchip.h> #include <linux/platform_device.h> #include <linux/of_platform.h> #include <linux/delay.h> @@ -32,6 +33,7 @@ #include <linux/sh_intc.h> #include <linux/sh_timer.h> #include <linux/platform_data/sh_ipmmu.h> +#include <linux/platform_data/irq-renesas-intc-irqpin.h> #include <mach/dma-register.h> #include <mach/hardware.h> #include <mach/irqs.h> @@ -810,7 +812,128 @@ static struct platform_device ipmmu_device = { .num_resources = ARRAY_SIZE(ipmmu_resources), }; -static struct platform_device *sh73a0_early_devices_dt[] __initdata = { +static struct renesas_intc_irqpin_config irqpin0_platform_data = { + .irq_base = irq_pin(0), /* IRQ0 -> IRQ7 */ +}; + +static struct resource irqpin0_resources[] = { + DEFINE_RES_MEM(0xe6900000, 4), /* ICR1A */ + DEFINE_RES_MEM(0xe6900010, 4), /* INTPRI00A */ + DEFINE_RES_MEM(0xe6900020, 1), /* INTREQ00A */ + DEFINE_RES_MEM(0xe6900040, 1), /* INTMSK00A */ + DEFINE_RES_MEM(0xe6900060, 1), /* INTMSKCLR00A */ + DEFINE_RES_IRQ(gic_spi(1)), /* IRQ0 */ + DEFINE_RES_IRQ(gic_spi(2)), /* IRQ1 */ + DEFINE_RES_IRQ(gic_spi(3)), /* IRQ2 */ + DEFINE_RES_IRQ(gic_spi(4)), /* IRQ3 */ + DEFINE_RES_IRQ(gic_spi(5)), /* IRQ4 */ + DEFINE_RES_IRQ(gic_spi(6)), /* IRQ5 */ + DEFINE_RES_IRQ(gic_spi(7)), /* IRQ6 */ + DEFINE_RES_IRQ(gic_spi(8)), /* IRQ7 */ +}; + +static struct platform_device irqpin0_device = { + .name = "renesas_intc_irqpin", + .id = 0, + .resource = irqpin0_resources, + .num_resources = ARRAY_SIZE(irqpin0_resources), + .dev = { + .platform_data = &irqpin0_platform_data, + }, +}; + +static struct renesas_intc_irqpin_config irqpin1_platform_data = { + .irq_base = irq_pin(8), /* IRQ8 -> IRQ15 */ + .control_parent = true, /* Disable spurious IRQ10 */ +}; + +static struct resource irqpin1_resources[] = { + DEFINE_RES_MEM(0xe6900004, 4), /* ICR2A */ + DEFINE_RES_MEM(0xe6900014, 4), /* INTPRI10A */ + DEFINE_RES_MEM(0xe6900024, 1), /* INTREQ10A */ + DEFINE_RES_MEM(0xe6900044, 1), /* INTMSK10A */ + DEFINE_RES_MEM(0xe6900064, 1), /* INTMSKCLR10A */ + DEFINE_RES_IRQ(gic_spi(9)), /* IRQ8 */ + DEFINE_RES_IRQ(gic_spi(10)), /* IRQ9 */ + DEFINE_RES_IRQ(gic_spi(11)), /* IRQ10 */ + DEFINE_RES_IRQ(gic_spi(12)), /* IRQ11 */ + DEFINE_RES_IRQ(gic_spi(13)), /* IRQ12 */ + DEFINE_RES_IRQ(gic_spi(14)), /* IRQ13 */ + DEFINE_RES_IRQ(gic_spi(15)), /* IRQ14 */ + DEFINE_RES_IRQ(gic_spi(16)), /* IRQ15 */ +}; + +static struct platform_device irqpin1_device = { + .name = "renesas_intc_irqpin", + .id = 1, + .resource = irqpin1_resources, + .num_resources = ARRAY_SIZE(irqpin1_resources), + .dev = { + .platform_data = &irqpin1_platform_data, + }, +}; + +static struct renesas_intc_irqpin_config irqpin2_platform_data = { + .irq_base = irq_pin(16), /* IRQ16 -> IRQ23 */ +}; + +static struct resource irqpin2_resources[] = { + DEFINE_RES_MEM(0xe6900008, 4), /* ICR3A */ + DEFINE_RES_MEM(0xe6900018, 4), /* INTPRI20A */ + DEFINE_RES_MEM(0xe6900028, 1), /* INTREQ20A */ + DEFINE_RES_MEM(0xe6900048, 1), /* INTMSK20A */ + DEFINE_RES_MEM(0xe6900068, 1), /* INTMSKCLR20A */ + DEFINE_RES_IRQ(gic_spi(17)), /* IRQ16 */ + DEFINE_RES_IRQ(gic_spi(18)), /* IRQ17 */ + DEFINE_RES_IRQ(gic_spi(19)), /* IRQ18 */ + DEFINE_RES_IRQ(gic_spi(20)), /* IRQ19 */ + DEFINE_RES_IRQ(gic_spi(21)), /* IRQ20 */ + DEFINE_RES_IRQ(gic_spi(22)), /* IRQ21 */ + DEFINE_RES_IRQ(gic_spi(23)), /* IRQ22 */ + DEFINE_RES_IRQ(gic_spi(24)), /* IRQ23 */ +}; + +static struct platform_device irqpin2_device = { + .name = "renesas_intc_irqpin", + .id = 2, + .resource = irqpin2_resources, + .num_resources = ARRAY_SIZE(irqpin2_resources), + .dev = { + .platform_data = &irqpin2_platform_data, + }, +}; + +static struct renesas_intc_irqpin_config irqpin3_platform_data = { + .irq_base = irq_pin(24), /* IRQ24 -> IRQ31 */ +}; + +static struct resource irqpin3_resources[] = { + DEFINE_RES_MEM(0xe690000c, 4), /* ICR4A */ + DEFINE_RES_MEM(0xe690001c, 4), /* INTPRI30A */ + DEFINE_RES_MEM(0xe690002c, 1), /* INTREQ30A */ + DEFINE_RES_MEM(0xe690004c, 1), /* INTMSK30A */ + DEFINE_RES_MEM(0xe690006c, 1), /* INTMSKCLR30A */ + DEFINE_RES_IRQ(gic_spi(25)), /* IRQ24 */ + DEFINE_RES_IRQ(gic_spi(26)), /* IRQ25 */ + DEFINE_RES_IRQ(gic_spi(27)), /* IRQ26 */ + DEFINE_RES_IRQ(gic_spi(28)), /* IRQ27 */ + DEFINE_RES_IRQ(gic_spi(29)), /* IRQ28 */ + DEFINE_RES_IRQ(gic_spi(30)), /* IRQ29 */ + DEFINE_RES_IRQ(gic_spi(31)), /* IRQ30 */ + DEFINE_RES_IRQ(gic_spi(32)), /* IRQ31 */ +}; + +static struct platform_device irqpin3_device = { + .name = "renesas_intc_irqpin", + .id = 3, + .resource = irqpin3_resources, + .num_resources = ARRAY_SIZE(irqpin3_resources), + .dev = { + .platform_data = &irqpin3_platform_data, + }, +}; + +static struct platform_device *sh73a0_devices_dt[] __initdata = { &scif0_device, &scif1_device, &scif2_device, @@ -838,6 +961,10 @@ static struct platform_device *sh73a0_late_devices[] __initdata = { &dma0_device, &mpdma0_device, &pmu_device, + &irqpin0_device, + &irqpin1_device, + &irqpin2_device, + &irqpin3_device, }; #define SRCR2 IOMEM(0xe61580b0) @@ -847,8 +974,8 @@ void __init sh73a0_add_standard_devices(void) /* Clear software reset bit on SY-DMAC module */ __raw_writel(__raw_readl(SRCR2) & ~(1 << 18), SRCR2); - platform_add_devices(sh73a0_early_devices_dt, - ARRAY_SIZE(sh73a0_early_devices_dt)); + platform_add_devices(sh73a0_devices_dt, + ARRAY_SIZE(sh73a0_devices_dt)); platform_add_devices(sh73a0_early_devices, ARRAY_SIZE(sh73a0_early_devices)); platform_add_devices(sh73a0_late_devices, @@ -867,8 +994,8 @@ void __init sh73a0_earlytimer_init(void) void __init sh73a0_add_early_devices(void) { - early_platform_add_devices(sh73a0_early_devices_dt, - ARRAY_SIZE(sh73a0_early_devices_dt)); + early_platform_add_devices(sh73a0_devices_dt, + ARRAY_SIZE(sh73a0_devices_dt)); early_platform_add_devices(sh73a0_early_devices, ARRAY_SIZE(sh73a0_early_devices)); @@ -878,23 +1005,9 @@ void __init sh73a0_add_early_devices(void) #ifdef CONFIG_USE_OF -/* Please note that the clock initialisation shcheme used in - * sh73a0_add_early_devices_dt() and sh73a0_add_standard_devices_dt() - * does not work with SMP as there is a yet to be resolved lock-up in - * workqueue initialisation. - * - * CONFIG_SMP should be disabled when using this code. - */ - -void __init sh73a0_add_early_devices_dt(void) +void __init sh73a0_init_delay(void) { shmobile_setup_delay(1196, 44, 46); /* Cortex-A9 @ 1196MHz */ - - early_platform_add_devices(sh73a0_early_devices_dt, - ARRAY_SIZE(sh73a0_early_devices_dt)); - - /* setup early console here as well */ - shmobile_setup_console(); } static const struct of_dev_auxdata sh73a0_auxdata_lookup[] __initconst = { @@ -906,8 +1019,8 @@ void __init sh73a0_add_standard_devices_dt(void) /* clocks are setup late during boot in the case of DT */ sh73a0_clock_init(); - platform_add_devices(sh73a0_early_devices_dt, - ARRAY_SIZE(sh73a0_early_devices_dt)); + platform_add_devices(sh73a0_devices_dt, + ARRAY_SIZE(sh73a0_devices_dt)); of_platform_populate(NULL, of_default_bus_match_table, sh73a0_auxdata_lookup, NULL); } @@ -918,10 +1031,11 @@ static const char *sh73a0_boards_compat_dt[] __initdata = { }; DT_MACHINE_START(SH73A0_DT, "Generic SH73A0 (Flattened Device Tree)") + .smp = smp_ops(sh73a0_smp_ops), .map_io = sh73a0_map_io, - .init_early = sh73a0_add_early_devices_dt, + .init_early = sh73a0_init_delay, .nr_irqs = NR_IRQS_LEGACY, - .init_irq = sh73a0_init_irq_dt, + .init_irq = irqchip_init, .init_machine = sh73a0_add_standard_devices_dt, .init_time = shmobile_timer_init, .dt_compat = sh73a0_boards_compat_dt, diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c index 953eb1f..8225c16 100644 --- a/arch/arm/mach-shmobile/smp-emev2.c +++ b/arch/arm/mach-shmobile/smp-emev2.c @@ -28,63 +28,9 @@ #include <mach/emev2.h> #include <asm/smp_plat.h> #include <asm/smp_scu.h> -#include <asm/cacheflush.h> #define EMEV2_SCU_BASE 0x1e000000 -static DEFINE_SPINLOCK(scu_lock); -static void __iomem *scu_base; - -static void modify_scu_cpu_psr(unsigned long set, unsigned long clr) -{ - unsigned long tmp; - - /* we assume this code is running on a different cpu - * than the one that is changing coherency setting */ - spin_lock(&scu_lock); - tmp = readl(scu_base + 8); - tmp &= ~clr; - tmp |= set; - writel(tmp, scu_base + 8); - spin_unlock(&scu_lock); - -} - -static unsigned int __init emev2_get_core_count(void) -{ - if (!scu_base) { - scu_base = ioremap(EMEV2_SCU_BASE, PAGE_SIZE); - emev2_clock_init(); /* need ioremapped SMU */ - } - - WARN_ON_ONCE(!scu_base); - - return scu_base ? scu_get_core_count(scu_base) : 1; -} - -static int emev2_platform_cpu_kill(unsigned int cpu) -{ - return 0; /* not supported yet */ -} - -static int __maybe_unused emev2_cpu_kill(unsigned int cpu) -{ - int k; - - /* this function is running on another CPU than the offline target, - * here we need wait for shutdown code in platform_cpu_die() to - * finish before asking SoC-specific code to power off the CPU core. - */ - for (k = 0; k < 1000; k++) { - if (shmobile_cpu_is_dead(cpu)) - return emev2_platform_cpu_kill(cpu); - mdelay(1); - } - - return 0; -} - - static void __cpuinit emev2_secondary_init(unsigned int cpu) { gic_secondary_init(0); @@ -92,31 +38,30 @@ static void __cpuinit emev2_secondary_init(unsigned int cpu) static int __cpuinit emev2_boot_secondary(unsigned int cpu, struct task_struct *idle) { - cpu = cpu_logical_map(cpu); - - /* enable cache coherency */ - modify_scu_cpu_psr(0, 3 << (cpu * 8)); - - /* Tell ROM loader about our vector (in headsmp.S) */ - emev2_set_boot_vector(__pa(shmobile_secondary_vector)); - - arch_send_wakeup_ipi_mask(cpumask_of(cpu)); + arch_send_wakeup_ipi_mask(cpumask_of(cpu_logical_map(cpu))); return 0; } static void __init emev2_smp_prepare_cpus(unsigned int max_cpus) { - int cpu = cpu_logical_map(0); + scu_enable(shmobile_scu_base); - scu_enable(scu_base); + /* Tell ROM loader about our vector (in headsmp-scu.S) */ + emev2_set_boot_vector(__pa(shmobile_secondary_vector_scu)); - /* enable cache coherency on CPU0 */ - modify_scu_cpu_psr(0, 3 << (cpu * 8)); + /* enable cache coherency on booting CPU */ + scu_power_mode(shmobile_scu_base, SCU_PM_NORMAL); } static void __init emev2_smp_init_cpus(void) { - unsigned int ncores = emev2_get_core_count(); + unsigned int ncores; + + /* setup EMEV2 specific SCU base */ + shmobile_scu_base = ioremap(EMEV2_SCU_BASE, PAGE_SIZE); + emev2_clock_init(); /* need ioremapped SMU */ + + ncores = shmobile_scu_base ? scu_get_core_count(shmobile_scu_base) : 1; shmobile_smp_init_cpus(ncores); } @@ -126,9 +71,4 @@ struct smp_operations emev2_smp_ops __initdata = { .smp_prepare_cpus = emev2_smp_prepare_cpus, .smp_secondary_init = emev2_secondary_init, .smp_boot_secondary = emev2_boot_secondary, -#ifdef CONFIG_HOTPLUG_CPU - .cpu_kill = emev2_cpu_kill, - .cpu_die = shmobile_cpu_die, - .cpu_disable = shmobile_cpu_disable, -#endif }; diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c index 3a4acf2..ea4535a 100644 --- a/arch/arm/mach-shmobile/smp-r8a7779.c +++ b/arch/arm/mach-shmobile/smp-r8a7779.c @@ -26,11 +26,13 @@ #include <linux/irqchip/arm-gic.h> #include <mach/common.h> #include <mach/r8a7779.h> +#include <asm/cacheflush.h> #include <asm/smp_plat.h> #include <asm/smp_scu.h> #include <asm/smp_twd.h> #define AVECR IOMEM(0xfe700040) +#define R8A7779_SCU_BASE 0xf0000000 static struct r8a7779_pm_ch r8a7779_ch_cpu1 = { .chan_offs = 0x40, /* PWRSR0 .. PWRER0 */ @@ -56,44 +58,14 @@ static struct r8a7779_pm_ch *r8a7779_ch_cpu[4] = { [3] = &r8a7779_ch_cpu3, }; -static void __iomem *scu_base_addr(void) -{ - return (void __iomem *)0xf0000000; -} - -static DEFINE_SPINLOCK(scu_lock); -static unsigned long tmp; - #ifdef CONFIG_HAVE_ARM_TWD -static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, 0xf0000600, 29); - +static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, R8A7779_SCU_BASE + 0x600, 29); void __init r8a7779_register_twd(void) { twd_local_timer_register(&twd_local_timer); } #endif -static void modify_scu_cpu_psr(unsigned long set, unsigned long clr) -{ - void __iomem *scu_base = scu_base_addr(); - - spin_lock(&scu_lock); - tmp = __raw_readl(scu_base + 8); - tmp &= ~clr; - tmp |= set; - spin_unlock(&scu_lock); - - /* disable cache coherency after releasing the lock */ - __raw_writel(tmp, scu_base + 8); -} - -static unsigned int __init r8a7779_get_core_count(void) -{ - void __iomem *scu_base = scu_base_addr(); - - return scu_get_core_count(scu_base); -} - static int r8a7779_platform_cpu_kill(unsigned int cpu) { struct r8a7779_pm_ch *ch = NULL; @@ -101,9 +73,6 @@ static int r8a7779_platform_cpu_kill(unsigned int cpu) cpu = cpu_logical_map(cpu); - /* disable cache coherency */ - modify_scu_cpu_psr(3 << (cpu * 8), 0); - if (cpu < ARRAY_SIZE(r8a7779_ch_cpu)) ch = r8a7779_ch_cpu[cpu]; @@ -113,25 +82,6 @@ static int r8a7779_platform_cpu_kill(unsigned int cpu) return ret ? ret : 1; } -static int __maybe_unused r8a7779_cpu_kill(unsigned int cpu) -{ - int k; - - /* this function is running on another CPU than the offline target, - * here we need wait for shutdown code in platform_cpu_die() to - * finish before asking SoC-specific code to power off the CPU core. - */ - for (k = 0; k < 1000; k++) { - if (shmobile_cpu_is_dead(cpu)) - return r8a7779_platform_cpu_kill(cpu); - - mdelay(1); - } - - return 0; -} - - static void __cpuinit r8a7779_secondary_init(unsigned int cpu) { gic_secondary_init(0); @@ -144,9 +94,6 @@ static int __cpuinit r8a7779_boot_secondary(unsigned int cpu, struct task_struct cpu = cpu_logical_map(cpu); - /* enable cache coherency */ - modify_scu_cpu_psr(0, 3 << (cpu * 8)); - if (cpu < ARRAY_SIZE(r8a7779_ch_cpu)) ch = r8a7779_ch_cpu[cpu]; @@ -158,15 +105,13 @@ static int __cpuinit r8a7779_boot_secondary(unsigned int cpu, struct task_struct static void __init r8a7779_smp_prepare_cpus(unsigned int max_cpus) { - int cpu = cpu_logical_map(0); + scu_enable(shmobile_scu_base); - scu_enable(scu_base_addr()); + /* Map the reset vector (in headsmp-scu.S) */ + __raw_writel(__pa(shmobile_secondary_vector_scu), AVECR); - /* Map the reset vector (in headsmp.S) */ - __raw_writel(__pa(shmobile_secondary_vector), AVECR); - - /* enable cache coherency on CPU0 */ - modify_scu_cpu_psr(0, 3 << (cpu * 8)); + /* enable cache coherency on booting CPU */ + scu_power_mode(shmobile_scu_base, SCU_PM_NORMAL); r8a7779_pm_init(); @@ -178,10 +123,60 @@ static void __init r8a7779_smp_prepare_cpus(unsigned int max_cpus) static void __init r8a7779_smp_init_cpus(void) { - unsigned int ncores = r8a7779_get_core_count(); + /* setup r8a7779 specific SCU base */ + shmobile_scu_base = IOMEM(R8A7779_SCU_BASE); + + shmobile_smp_init_cpus(scu_get_core_count(shmobile_scu_base)); +} - shmobile_smp_init_cpus(ncores); +#ifdef CONFIG_HOTPLUG_CPU +static int r8a7779_scu_psr_core_disabled(int cpu) +{ + unsigned long mask = 3 << (cpu * 8); + + if ((__raw_readl(shmobile_scu_base + 8) & mask) == mask) + return 1; + + return 0; +} + +static int r8a7779_cpu_kill(unsigned int cpu) +{ + int k; + + /* this function is running on another CPU than the offline target, + * here we need wait for shutdown code in platform_cpu_die() to + * finish before asking SoC-specific code to power off the CPU core. + */ + for (k = 0; k < 1000; k++) { + if (r8a7779_scu_psr_core_disabled(cpu)) + return r8a7779_platform_cpu_kill(cpu); + + mdelay(1); + } + + return 0; +} + +static void r8a7779_cpu_die(unsigned int cpu) +{ + dsb(); + flush_cache_all(); + + /* disable cache coherency */ + scu_power_mode(shmobile_scu_base, SCU_PM_POWEROFF); + + /* Endless loop until power off from r8a7779_cpu_kill() */ + while (1) + cpu_do_idle(); +} + +static int r8a7779_cpu_disable(unsigned int cpu) +{ + /* only CPU1->3 have power domains, do not allow hotplug of CPU0 */ + return cpu == 0 ? -EPERM : 0; } +#endif /* CONFIG_HOTPLUG_CPU */ struct smp_operations r8a7779_smp_ops __initdata = { .smp_init_cpus = r8a7779_smp_init_cpus, @@ -190,7 +185,7 @@ struct smp_operations r8a7779_smp_ops __initdata = { .smp_boot_secondary = r8a7779_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_kill = r8a7779_cpu_kill, - .cpu_die = shmobile_cpu_die, - .cpu_disable = shmobile_cpu_disable, + .cpu_die = r8a7779_cpu_die, + .cpu_disable = r8a7779_cpu_disable, #endif }; diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c index acb46a9..5ae502b 100644 --- a/arch/arm/mach-shmobile/smp-sh73a0.c +++ b/arch/arm/mach-shmobile/smp-sh73a0.c @@ -39,26 +39,16 @@ #define PSTR_SHUTDOWN_MODE 3 -static void __iomem *scu_base_addr(void) -{ - return (void __iomem *)0xf0000000; -} +#define SH73A0_SCU_BASE 0xf0000000 #ifdef CONFIG_HAVE_ARM_TWD -static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, 0xf0000600, 29); +static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, SH73A0_SCU_BASE + 0x600, 29); void __init sh73a0_register_twd(void) { twd_local_timer_register(&twd_local_timer); } #endif -static unsigned int __init sh73a0_get_core_count(void) -{ - void __iomem *scu_base = scu_base_addr(); - - return scu_get_core_count(scu_base); -} - static void __cpuinit sh73a0_secondary_init(unsigned int cpu) { gic_secondary_init(0); @@ -78,21 +68,22 @@ static int __cpuinit sh73a0_boot_secondary(unsigned int cpu, struct task_struct static void __init sh73a0_smp_prepare_cpus(unsigned int max_cpus) { - scu_enable(scu_base_addr()); + scu_enable(shmobile_scu_base); - /* Map the reset vector (in headsmp-sh73a0.S) */ + /* Map the reset vector (in headsmp-scu.S) */ __raw_writel(0, APARMBAREA); /* 4k */ - __raw_writel(__pa(sh73a0_secondary_vector), SBAR); + __raw_writel(__pa(shmobile_secondary_vector_scu), SBAR); /* enable cache coherency on booting CPU */ - scu_power_mode(scu_base_addr(), SCU_PM_NORMAL); + scu_power_mode(shmobile_scu_base, SCU_PM_NORMAL); } static void __init sh73a0_smp_init_cpus(void) { - unsigned int ncores = sh73a0_get_core_count(); + /* setup sh73a0 specific SCU base */ + shmobile_scu_base = IOMEM(SH73A0_SCU_BASE); - shmobile_smp_init_cpus(ncores); + shmobile_smp_init_cpus(scu_get_core_count(shmobile_scu_base)); } #ifdef CONFIG_HOTPLUG_CPU @@ -128,11 +119,16 @@ static void sh73a0_cpu_die(unsigned int cpu) flush_cache_all(); /* Set power off mode. This takes the CPU out of the MP cluster */ - scu_power_mode(scu_base_addr(), SCU_PM_POWEROFF); + scu_power_mode(shmobile_scu_base, SCU_PM_POWEROFF); /* Enter shutdown mode */ cpu_do_idle(); } + +static int sh73a0_cpu_disable(unsigned int cpu) +{ + return 0; /* CPU0 and CPU1 supported */ +} #endif /* CONFIG_HOTPLUG_CPU */ struct smp_operations sh73a0_smp_ops __initdata = { @@ -143,6 +139,6 @@ struct smp_operations sh73a0_smp_ops __initdata = { #ifdef CONFIG_HOTPLUG_CPU .cpu_kill = sh73a0_cpu_kill, .cpu_die = sh73a0_cpu_die, - .cpu_disable = shmobile_cpu_disable_any, + .cpu_disable = sh73a0_cpu_disable, #endif }; diff --git a/arch/arm/mach-spear13xx/spear13xx.c b/arch/arm/mach-spear13xx/spear13xx.c index c7d2b4a..25a1019 100644 --- a/arch/arm/mach-spear13xx/spear13xx.c +++ b/arch/arm/mach-spear13xx/spear13xx.c @@ -15,12 +15,12 @@ #include <linux/amba/pl022.h> #include <linux/clk.h> +#include <linux/clocksource.h> #include <linux/dw_dmac.h> #include <linux/err.h> #include <linux/of.h> #include <asm/hardware/cache-l2x0.h> #include <asm/mach/map.h> -#include <asm/smp_twd.h> #include <mach/dma.h> #include <mach/generic.h> #include <mach/spear.h> @@ -179,5 +179,5 @@ void __init spear13xx_timer_init(void) clk_put(pclk); spear_setup_of_timer(); - twd_local_timer_of_register(); + clocksource_of_init(); } diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index f6b46ae..e40326d 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -10,6 +10,7 @@ obj-y += pm.o obj-y += reset.o obj-y += reset-handler.o obj-y += sleep.o +obj-y += tegra.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20_speedo.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_emc.o @@ -27,9 +28,7 @@ obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_CPU_FREQ) += cpu-tegra.o obj-$(CONFIG_TEGRA_PCI) += pcie.o -obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += board-dt-tegra20.o -obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += board-dt-tegra30.o -obj-$(CONFIG_ARCH_TEGRA_114_SOC) += board-dt-tegra114.o +obj-$(CONFIG_ARCH_TEGRA_114_SOC) += tegra114_speedo.o ifeq ($(CONFIG_CPU_IDLE),y) obj-$(CONFIG_ARCH_TEGRA_114_SOC) += cpuidle-tegra114.o endif diff --git a/arch/arm/mach-tegra/board-dt-tegra114.c b/arch/arm/mach-tegra/board-dt-tegra114.c deleted file mode 100644 index 085d636..0000000 --- a/arch/arm/mach-tegra/board-dt-tegra114.c +++ /dev/null @@ -1,46 +0,0 @@ -/* - * NVIDIA Tegra114 device tree board support - * - * Copyright (C) 2013 NVIDIA Corporation - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/of.h> -#include <linux/of_platform.h> -#include <linux/clocksource.h> - -#include <asm/mach/arch.h> - -#include "board.h" -#include "common.h" - -static void __init tegra114_dt_init(void) -{ - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -} - -static const char * const tegra114_dt_board_compat[] = { - "nvidia,tegra114", - NULL, -}; - -DT_MACHINE_START(TEGRA114_DT, "NVIDIA Tegra114 (Flattened Device Tree)") - .smp = smp_ops(tegra_smp_ops), - .map_io = tegra_map_common_io, - .init_early = tegra114_init_early, - .init_irq = tegra_dt_init_irq, - .init_time = clocksource_of_init, - .init_machine = tegra114_dt_init, - .init_late = tegra_init_late, - .restart = tegra_assert_system_reset, - .dt_compat = tegra114_dt_board_compat, -MACHINE_END diff --git a/arch/arm/mach-tegra/board-dt-tegra30.c b/arch/arm/mach-tegra/board-dt-tegra30.c deleted file mode 100644 index bf68567..0000000 --- a/arch/arm/mach-tegra/board-dt-tegra30.c +++ /dev/null @@ -1,60 +0,0 @@ -/* - * arch/arm/mach-tegra/board-dt-tegra30.c - * - * NVIDIA Tegra30 device tree board support - * - * Copyright (C) 2011 NVIDIA Corporation - * - * Derived from: - * - * arch/arm/mach-tegra/board-dt-tegra20.c - * - * Copyright (C) 2010 Secret Lab Technologies, Ltd. - * Copyright (C) 2010 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/clocksource.h> -#include <linux/kernel.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_fdt.h> -#include <linux/of_irq.h> -#include <linux/of_platform.h> - -#include <asm/mach/arch.h> - -#include "board.h" -#include "common.h" -#include "iomap.h" - -static void __init tegra30_dt_init(void) -{ - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -} - -static const char *tegra30_dt_board_compat[] = { - "nvidia,tegra30", - NULL -}; - -DT_MACHINE_START(TEGRA30_DT, "NVIDIA Tegra30 (Flattened Device Tree)") - .smp = smp_ops(tegra_smp_ops), - .map_io = tegra_map_common_io, - .init_early = tegra30_init_early, - .init_irq = tegra_dt_init_irq, - .init_time = clocksource_of_init, - .init_machine = tegra30_dt_init, - .init_late = tegra_init_late, - .restart = tegra_assert_system_reset, - .dt_compat = tegra30_dt_board_compat, -MACHINE_END diff --git a/arch/arm/mach-tegra/board-harmony-pcie.c b/arch/arm/mach-tegra/board-harmony-pcie.c index 3cdc1bb..035b240 100644 --- a/arch/arm/mach-tegra/board-harmony-pcie.c +++ b/arch/arm/mach-tegra/board-harmony-pcie.c @@ -56,13 +56,17 @@ int __init harmony_pcie_init(void) gpio_direction_output(en_vdd_1v05, 1); regulator = regulator_get(NULL, "vdd_ldo0,vddio_pex_clk"); - if (IS_ERR_OR_NULL(regulator)) { - pr_err("%s: regulator_get failed: %d\n", __func__, - (int)PTR_ERR(regulator)); + if (IS_ERR(regulator)) { + err = PTR_ERR(regulator); + pr_err("%s: regulator_get failed: %d\n", __func__, err); goto err_reg; } - regulator_enable(regulator); + err = regulator_enable(regulator); + if (err) { + pr_err("%s: regulator_enable failed: %d\n", __func__, err); + goto err_en; + } err = tegra_pcie_init(true, true); if (err) { @@ -74,6 +78,7 @@ int __init harmony_pcie_init(void) err_pcie: regulator_disable(regulator); +err_en: regulator_put(regulator); err_reg: gpio_free(en_vdd_1v05); diff --git a/arch/arm/mach-tegra/board.h b/arch/arm/mach-tegra/board.h index 86851c8..60431de 100644 --- a/arch/arm/mach-tegra/board.h +++ b/arch/arm/mach-tegra/board.h @@ -26,9 +26,7 @@ void tegra_assert_system_reset(char mode, const char *cmd); -void __init tegra20_init_early(void); -void __init tegra30_init_early(void); -void __init tegra114_init_early(void); +void __init tegra_init_early(void); void __init tegra_map_common_io(void); void __init tegra_init_irq(void); void __init tegra_dt_init_irq(void); diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c index 5449a3f..eb1f3c8 100644 --- a/arch/arm/mach-tegra/common.c +++ b/arch/arm/mach-tegra/common.c @@ -33,6 +33,7 @@ #include "common.h" #include "fuse.h" #include "iomap.h" +#include "irq.h" #include "pmc.h" #include "apbio.h" #include "sleep.h" @@ -61,8 +62,10 @@ u32 tegra_uart_config[4] = { void __init tegra_dt_init_irq(void) { tegra_clocks_init(); + tegra_pmc_init(); tegra_init_irq(); irqchip_init(); + tegra_legacy_irq_syscore_init(); } #endif @@ -94,40 +97,18 @@ static void __init tegra_init_cache(void) } -static void __init tegra_init_early(void) +void __init tegra_init_early(void) { tegra_cpu_reset_handler_init(); tegra_apb_io_init(); tegra_init_fuse(); tegra_init_cache(); - tegra_pmc_init(); tegra_powergate_init(); + tegra_hotplug_init(); } -#ifdef CONFIG_ARCH_TEGRA_2x_SOC -void __init tegra20_init_early(void) -{ - tegra_init_early(); - tegra20_hotplug_init(); -} -#endif - -#ifdef CONFIG_ARCH_TEGRA_3x_SOC -void __init tegra30_init_early(void) -{ - tegra_init_early(); - tegra30_hotplug_init(); -} -#endif - -#ifdef CONFIG_ARCH_TEGRA_114_SOC -void __init tegra114_init_early(void) -{ - tegra_init_early(); -} -#endif - void __init tegra_init_late(void) { + tegra_init_suspend(); tegra_powergate_debugfs_init(); } diff --git a/arch/arm/mach-tegra/cpuidle-tegra20.c b/arch/arm/mach-tegra/cpuidle-tegra20.c index 825ced4..8bbbdeb 100644 --- a/arch/arm/mach-tegra/cpuidle-tegra20.c +++ b/arch/arm/mach-tegra/cpuidle-tegra20.c @@ -130,10 +130,6 @@ static bool tegra20_cpu_cluster_power_down(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { - struct cpuidle_state *state = &drv->states[index]; - u32 cpu_on_time = state->exit_latency; - u32 cpu_off_time = state->target_residency - state->exit_latency; - while (tegra20_cpu_is_resettable_soon()) cpu_relax(); @@ -142,7 +138,7 @@ static bool tegra20_cpu_cluster_power_down(struct cpuidle_device *dev, clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &dev->cpu); - tegra_idle_lp2_last(cpu_on_time, cpu_off_time); + tegra_idle_lp2_last(); clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &dev->cpu); diff --git a/arch/arm/mach-tegra/cpuidle-tegra30.c b/arch/arm/mach-tegra/cpuidle-tegra30.c index 8b50cf4..c0931c8 100644 --- a/arch/arm/mach-tegra/cpuidle-tegra30.c +++ b/arch/arm/mach-tegra/cpuidle-tegra30.c @@ -72,10 +72,6 @@ static bool tegra30_cpu_cluster_power_down(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { - struct cpuidle_state *state = &drv->states[index]; - u32 cpu_on_time = state->exit_latency; - u32 cpu_off_time = state->target_residency - state->exit_latency; - /* All CPUs entering LP2 is not working. * Don't let CPU0 enter LP2 when any secondary CPU is online. */ @@ -86,7 +82,7 @@ static bool tegra30_cpu_cluster_power_down(struct cpuidle_device *dev, clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &dev->cpu); - tegra_idle_lp2_last(cpu_on_time, cpu_off_time); + tegra_idle_lp2_last(); clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &dev->cpu); @@ -102,12 +98,8 @@ static bool tegra30_cpu_core_power_down(struct cpuidle_device *dev, smp_wmb(); - save_cpu_arch_register(); - cpu_suspend(0, tegra30_sleep_cpu_secondary_finish); - restore_cpu_arch_register(); - clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &dev->cpu); return true; diff --git a/arch/arm/mach-tegra/fuse.c b/arch/arm/mach-tegra/fuse.c index f7db078..e035cd2 100644 --- a/arch/arm/mach-tegra/fuse.c +++ b/arch/arm/mach-tegra/fuse.c @@ -2,6 +2,7 @@ * arch/arm/mach-tegra/fuse.c * * Copyright (C) 2010 Google, Inc. + * Copyright (c) 2013, NVIDIA CORPORATION. All rights reserved. * * Author: * Colin Cross <ccross@android.com> @@ -137,6 +138,9 @@ void tegra_init_fuse(void) tegra_fuse_spare_bit = TEGRA30_FUSE_SPARE_BIT; tegra_init_speedo_data = &tegra30_init_speedo_data; break; + case TEGRA114: + tegra_init_speedo_data = &tegra114_init_speedo_data; + break; default: pr_warn("Tegra: unknown chip id %d\n", tegra_chip_id); tegra_fuse_spare_bit = TEGRA20_FUSE_SPARE_BIT; diff --git a/arch/arm/mach-tegra/fuse.h b/arch/arm/mach-tegra/fuse.h index da78434..aacc00d 100644 --- a/arch/arm/mach-tegra/fuse.h +++ b/arch/arm/mach-tegra/fuse.h @@ -1,5 +1,6 @@ /* * Copyright (C) 2010 Google, Inc. + * Copyright (c) 2013, NVIDIA CORPORATION. All rights reserved. * * Author: * Colin Cross <ccross@android.com> @@ -66,4 +67,10 @@ void tegra30_init_speedo_data(void); static inline void tegra30_init_speedo_data(void) {} #endif +#ifdef CONFIG_ARCH_TEGRA_114_SOC +void tegra114_init_speedo_data(void); +#else +static inline void tegra114_init_speedo_data(void) {} +#endif + #endif diff --git a/arch/arm/mach-tegra/headsmp.S b/arch/arm/mach-tegra/headsmp.S index fd473f2..045c16f 100644 --- a/arch/arm/mach-tegra/headsmp.S +++ b/arch/arm/mach-tegra/headsmp.S @@ -7,8 +7,5 @@ ENTRY(tegra_secondary_startup) bl v7_invalidate_l1 - /* Enable coresight */ - mov32 r0, 0xC5ACCE55 - mcr p14, 0, r0, c7, c12, 6 b secondary_startup ENDPROC(tegra_secondary_startup) diff --git a/arch/arm/mach-tegra/hotplug.c b/arch/arm/mach-tegra/hotplug.c index a599f6e..8da9f78 100644 --- a/arch/arm/mach-tegra/hotplug.c +++ b/arch/arm/mach-tegra/hotplug.c @@ -1,8 +1,7 @@ /* - * * Copyright (C) 2002 ARM Ltd. * All Rights Reserved - * Copyright (c) 2010, 2012 NVIDIA Corporation. All rights reserved. + * Copyright (c) 2010, 2012-2013, NVIDIA Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -15,6 +14,7 @@ #include <asm/cacheflush.h> #include <asm/smp_plat.h> +#include "fuse.h" #include "sleep.h" static void (*tegra_hotplug_shutdown)(void); @@ -56,18 +56,13 @@ int tegra_cpu_disable(unsigned int cpu) return cpu == 0 ? -EPERM : 0; } -#ifdef CONFIG_ARCH_TEGRA_2x_SOC -extern void tegra20_hotplug_shutdown(void); -void __init tegra20_hotplug_init(void) +void __init tegra_hotplug_init(void) { - tegra_hotplug_shutdown = tegra20_hotplug_shutdown; -} -#endif + if (!IS_ENABLED(CONFIG_HOTPLUG_CPU)) + return; -#ifdef CONFIG_ARCH_TEGRA_3x_SOC -extern void tegra30_hotplug_shutdown(void); -void __init tegra30_hotplug_init(void) -{ - tegra_hotplug_shutdown = tegra30_hotplug_shutdown; + if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC) && tegra_chip_id == TEGRA20) + tegra_hotplug_shutdown = tegra20_hotplug_shutdown; + if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) && tegra_chip_id == TEGRA30) + tegra_hotplug_shutdown = tegra30_hotplug_shutdown; } -#endif diff --git a/arch/arm/mach-tegra/irq.c b/arch/arm/mach-tegra/irq.c index 1952e82..0de4eed 100644 --- a/arch/arm/mach-tegra/irq.c +++ b/arch/arm/mach-tegra/irq.c @@ -4,7 +4,7 @@ * Author: * Colin Cross <ccross@android.com> * - * Copyright (C) 2010, NVIDIA Corporation + * Copyright (C) 2010,2013, NVIDIA Corporation * * This software is licensed under the terms of the GNU General Public * License version 2, as published by the Free Software Foundation, and @@ -23,6 +23,7 @@ #include <linux/io.h> #include <linux/of.h> #include <linux/irqchip/arm-gic.h> +#include <linux/syscore_ops.h> #include "board.h" #include "iomap.h" @@ -43,6 +44,7 @@ #define ICTLR_COP_IEP_CLASS 0x3c #define FIRST_LEGACY_IRQ 32 +#define TEGRA_MAX_NUM_ICTLRS 5 #define SGI_MASK 0xFFFF @@ -56,6 +58,15 @@ static void __iomem *ictlr_reg_base[] = { IO_ADDRESS(TEGRA_QUINARY_ICTLR_BASE), }; +#ifdef CONFIG_PM_SLEEP +static u32 cop_ier[TEGRA_MAX_NUM_ICTLRS]; +static u32 cop_iep[TEGRA_MAX_NUM_ICTLRS]; +static u32 cpu_ier[TEGRA_MAX_NUM_ICTLRS]; +static u32 cpu_iep[TEGRA_MAX_NUM_ICTLRS]; + +static u32 ictlr_wake_mask[TEGRA_MAX_NUM_ICTLRS]; +#endif + bool tegra_pending_sgi(void) { u32 pending_set; @@ -125,6 +136,87 @@ static int tegra_retrigger(struct irq_data *d) return 1; } +#ifdef CONFIG_PM_SLEEP +static int tegra_set_wake(struct irq_data *d, unsigned int enable) +{ + u32 irq = d->irq; + u32 index, mask; + + if (irq < FIRST_LEGACY_IRQ || + irq >= FIRST_LEGACY_IRQ + num_ictlrs * 32) + return -EINVAL; + + index = ((irq - FIRST_LEGACY_IRQ) / 32); + mask = BIT((irq - FIRST_LEGACY_IRQ) % 32); + if (enable) + ictlr_wake_mask[index] |= mask; + else + ictlr_wake_mask[index] &= ~mask; + + return 0; +} + +static int tegra_legacy_irq_suspend(void) +{ + unsigned long flags; + int i; + + local_irq_save(flags); + for (i = 0; i < num_ictlrs; i++) { + void __iomem *ictlr = ictlr_reg_base[i]; + /* Save interrupt state */ + cpu_ier[i] = readl_relaxed(ictlr + ICTLR_CPU_IER); + cpu_iep[i] = readl_relaxed(ictlr + ICTLR_CPU_IEP_CLASS); + cop_ier[i] = readl_relaxed(ictlr + ICTLR_COP_IER); + cop_iep[i] = readl_relaxed(ictlr + ICTLR_COP_IEP_CLASS); + + /* Disable COP interrupts */ + writel_relaxed(~0ul, ictlr + ICTLR_COP_IER_CLR); + + /* Disable CPU interrupts */ + writel_relaxed(~0ul, ictlr + ICTLR_CPU_IER_CLR); + + /* Enable the wakeup sources of ictlr */ + writel_relaxed(ictlr_wake_mask[i], ictlr + ICTLR_CPU_IER_SET); + } + local_irq_restore(flags); + + return 0; +} + +static void tegra_legacy_irq_resume(void) +{ + unsigned long flags; + int i; + + local_irq_save(flags); + for (i = 0; i < num_ictlrs; i++) { + void __iomem *ictlr = ictlr_reg_base[i]; + writel_relaxed(cpu_iep[i], ictlr + ICTLR_CPU_IEP_CLASS); + writel_relaxed(~0ul, ictlr + ICTLR_CPU_IER_CLR); + writel_relaxed(cpu_ier[i], ictlr + ICTLR_CPU_IER_SET); + writel_relaxed(cop_iep[i], ictlr + ICTLR_COP_IEP_CLASS); + writel_relaxed(~0ul, ictlr + ICTLR_COP_IER_CLR); + writel_relaxed(cop_ier[i], ictlr + ICTLR_COP_IER_SET); + } + local_irq_restore(flags); +} + +static struct syscore_ops tegra_legacy_irq_syscore_ops = { + .suspend = tegra_legacy_irq_suspend, + .resume = tegra_legacy_irq_resume, +}; + +int tegra_legacy_irq_syscore_init(void) +{ + register_syscore_ops(&tegra_legacy_irq_syscore_ops); + + return 0; +} +#else +#define tegra_set_wake NULL +#endif + void __init tegra_init_irq(void) { int i; @@ -150,6 +242,8 @@ void __init tegra_init_irq(void) gic_arch_extn.irq_mask = tegra_mask; gic_arch_extn.irq_unmask = tegra_unmask; gic_arch_extn.irq_retrigger = tegra_retrigger; + gic_arch_extn.irq_set_wake = tegra_set_wake; + gic_arch_extn.flags = IRQCHIP_MASK_ON_SUSPEND; /* * Check if there is a devicetree present, since the GIC will be diff --git a/arch/arm/mach-tegra/irq.h b/arch/arm/mach-tegra/irq.h index 5142649..bc05ce5 100644 --- a/arch/arm/mach-tegra/irq.h +++ b/arch/arm/mach-tegra/irq.h @@ -19,4 +19,10 @@ bool tegra_pending_sgi(void); +#ifdef CONFIG_PM_SLEEP +int tegra_legacy_irq_syscore_init(void); +#else +static inline int tegra_legacy_irq_syscore_init(void) { return 0; } +#endif + #endif diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c index 2c6b3d5..516aab2 100644 --- a/arch/arm/mach-tegra/platsmp.c +++ b/arch/arm/mach-tegra/platsmp.c @@ -26,22 +26,16 @@ #include <asm/smp_scu.h> #include <asm/smp_plat.h> -#include <mach/powergate.h> - #include "fuse.h" #include "flowctrl.h" #include "reset.h" +#include "pmc.h" #include "common.h" #include "iomap.h" -extern void tegra_secondary_startup(void); - static cpumask_t tegra_cpu_init_mask; -#define EVP_CPU_RESET_VECTOR \ - (IO_ADDRESS(TEGRA_EXCEPTION_VECTORS_BASE) + 0x100) - static void __cpuinit tegra_secondary_init(unsigned int cpu) { /* @@ -54,25 +48,43 @@ static void __cpuinit tegra_secondary_init(unsigned int cpu) cpumask_set_cpu(cpu, &tegra_cpu_init_mask); } -static int tegra20_power_up_cpu(unsigned int cpu) + +static int tegra20_boot_secondary(unsigned int cpu, struct task_struct *idle) { - /* Enable the CPU clock. */ - tegra_enable_cpu_clock(cpu); + cpu = cpu_logical_map(cpu); + + /* + * Force the CPU into reset. The CPU must remain in reset when + * the flow controller state is cleared (which will cause the + * flow controller to stop driving reset if the CPU has been + * power-gated via the flow controller). This will have no + * effect on first boot of the CPU since it should already be + * in reset. + */ + tegra_put_cpu_in_reset(cpu); - /* Clear flow controller CSR. */ - flowctrl_write_cpu_csr(cpu, 0); + /* + * Unhalt the CPU. If the flow controller was used to + * power-gate the CPU this will cause the flow controller to + * stop driving reset. The CPU will remain in reset because the + * clock and reset block is now driving reset. + */ + flowctrl_write_cpu_halt(cpu, 0); + tegra_enable_cpu_clock(cpu); + flowctrl_write_cpu_csr(cpu, 0); /* Clear flow controller CSR. */ + tegra_cpu_out_of_reset(cpu); return 0; } -static int tegra30_power_up_cpu(unsigned int cpu) +static int tegra30_boot_secondary(unsigned int cpu, struct task_struct *idle) { - int ret, pwrgateid; + int ret; unsigned long timeout; - pwrgateid = tegra_cpu_powergate_id(cpu); - if (pwrgateid < 0) - return pwrgateid; + cpu = cpu_logical_map(cpu); + tegra_put_cpu_in_reset(cpu); + flowctrl_write_cpu_halt(cpu, 0); /* * The power up sequence of cold boot CPU and warm boot CPU @@ -85,13 +97,13 @@ static int tegra30_power_up_cpu(unsigned int cpu) * the IO clamps. * For cold boot CPU, do not wait. After the cold boot CPU be * booted, it will run to tegra_secondary_init() and set - * tegra_cpu_init_mask which influences what tegra30_power_up_cpu() + * tegra_cpu_init_mask which influences what tegra30_boot_secondary() * next time around. */ if (cpumask_test_cpu(cpu, &tegra_cpu_init_mask)) { timeout = jiffies + msecs_to_jiffies(50); do { - if (!tegra_powergate_is_powered(pwrgateid)) + if (tegra_pmc_cpu_is_powered(cpu)) goto remove_clamps; udelay(10); } while (time_before(jiffies, timeout)); @@ -103,14 +115,14 @@ static int tegra30_power_up_cpu(unsigned int cpu) * be un-gated by un-toggling the power gate register * manually. */ - if (!tegra_powergate_is_powered(pwrgateid)) { - ret = tegra_powergate_power_on(pwrgateid); + if (!tegra_pmc_cpu_is_powered(cpu)) { + ret = tegra_pmc_cpu_power_on(cpu); if (ret) return ret; /* Wait for the power to come up. */ timeout = jiffies + msecs_to_jiffies(100); - while (tegra_powergate_is_powered(pwrgateid)) { + while (tegra_pmc_cpu_is_powered(cpu)) { if (time_after(jiffies, timeout)) return -ETIMEDOUT; udelay(10); @@ -123,57 +135,34 @@ remove_clamps: udelay(10); /* Remove I/O clamps. */ - ret = tegra_powergate_remove_clamping(pwrgateid); - udelay(10); + ret = tegra_pmc_cpu_remove_clamping(cpu); + if (ret) + return ret; - /* Clear flow controller CSR. */ - flowctrl_write_cpu_csr(cpu, 0); + udelay(10); + flowctrl_write_cpu_csr(cpu, 0); /* Clear flow controller CSR. */ + tegra_cpu_out_of_reset(cpu); return 0; } -static int __cpuinit tegra_boot_secondary(unsigned int cpu, struct task_struct *idle) +static int tegra114_boot_secondary(unsigned int cpu, struct task_struct *idle) { - int status; - cpu = cpu_logical_map(cpu); + return tegra_pmc_cpu_power_on(cpu); +} - /* - * Force the CPU into reset. The CPU must remain in reset when the - * flow controller state is cleared (which will cause the flow - * controller to stop driving reset if the CPU has been power-gated - * via the flow controller). This will have no effect on first boot - * of the CPU since it should already be in reset. - */ - tegra_put_cpu_in_reset(cpu); - - /* - * Unhalt the CPU. If the flow controller was used to power-gate the - * CPU this will cause the flow controller to stop driving reset. - * The CPU will remain in reset because the clock and reset block - * is now driving reset. - */ - flowctrl_write_cpu_halt(cpu, 0); - - switch (tegra_chip_id) { - case TEGRA20: - status = tegra20_power_up_cpu(cpu); - break; - case TEGRA30: - status = tegra30_power_up_cpu(cpu); - break; - default: - status = -EINVAL; - break; - } - - if (status) - goto done; - - /* Take the CPU out of reset. */ - tegra_cpu_out_of_reset(cpu); -done: - return status; +static int __cpuinit tegra_boot_secondary(unsigned int cpu, + struct task_struct *idle) +{ + if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC) && tegra_chip_id == TEGRA20) + return tegra20_boot_secondary(cpu, idle); + if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) && tegra_chip_id == TEGRA30) + return tegra30_boot_secondary(cpu, idle); + if (IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) && tegra_chip_id == TEGRA114) + return tegra114_boot_secondary(cpu, idle); + + return -EINVAL; } static void __init tegra_smp_prepare_cpus(unsigned int max_cpus) diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c index 523604d..d0b7400 100644 --- a/arch/arm/mach-tegra/pm.c +++ b/arch/arm/mach-tegra/pm.c @@ -22,7 +22,7 @@ #include <linux/cpumask.h> #include <linux/delay.h> #include <linux/cpu_pm.h> -#include <linux/clk.h> +#include <linux/suspend.h> #include <linux/err.h> #include <linux/clk/tegra.h> @@ -37,67 +37,13 @@ #include "reset.h" #include "flowctrl.h" #include "fuse.h" +#include "pmc.h" #include "sleep.h" -#define TEGRA_POWER_CPU_PWRREQ_OE (1 << 16) /* CPU pwr req enable */ - -#define PMC_CTRL 0x0 -#define PMC_CPUPWRGOOD_TIMER 0xc8 -#define PMC_CPUPWROFF_TIMER 0xcc - #ifdef CONFIG_PM_SLEEP -static unsigned int g_diag_reg; static DEFINE_SPINLOCK(tegra_lp2_lock); -static void __iomem *pmc = IO_ADDRESS(TEGRA_PMC_BASE); -static struct clk *tegra_pclk; void (*tegra_tear_down_cpu)(void); -void save_cpu_arch_register(void) -{ - /* read diagnostic register */ - asm("mrc p15, 0, %0, c15, c0, 1" : "=r"(g_diag_reg) : : "cc"); - return; -} - -void restore_cpu_arch_register(void) -{ - /* write diagnostic register */ - asm("mcr p15, 0, %0, c15, c0, 1" : : "r"(g_diag_reg) : "cc"); - return; -} - -static void set_power_timers(unsigned long us_on, unsigned long us_off) -{ - unsigned long long ticks; - unsigned long long pclk; - unsigned long rate; - static unsigned long tegra_last_pclk; - - if (tegra_pclk == NULL) { - tegra_pclk = clk_get_sys(NULL, "pclk"); - WARN_ON(IS_ERR(tegra_pclk)); - } - - rate = clk_get_rate(tegra_pclk); - - if (WARN_ON_ONCE(rate <= 0)) - pclk = 100000000; - else - pclk = rate; - - if ((rate != tegra_last_pclk)) { - ticks = (us_on * pclk) + 999999ull; - do_div(ticks, 1000000); - writel((unsigned long)ticks, pmc + PMC_CPUPWRGOOD_TIMER); - - ticks = (us_off * pclk) + 999999ull; - do_div(ticks, 1000000); - writel((unsigned long)ticks, pmc + PMC_CPUPWROFF_TIMER); - wmb(); - } - tegra_last_pclk = pclk; -} - /* * restore_cpu_complex * @@ -119,8 +65,6 @@ static void restore_cpu_complex(void) tegra_cpu_clock_resume(); flowctrl_cpu_suspend_exit(cpu); - - restore_cpu_arch_register(); } /* @@ -145,8 +89,6 @@ static void suspend_cpu_complex(void) tegra_cpu_clock_suspend(); flowctrl_cpu_suspend_enter(cpu); - - save_cpu_arch_register(); } void tegra_clear_cpu_in_lp2(int phy_cpu_id) @@ -197,16 +139,9 @@ static int tegra_sleep_cpu(unsigned long v2p) return 0; } -void tegra_idle_lp2_last(u32 cpu_on_time, u32 cpu_off_time) +void tegra_idle_lp2_last(void) { - u32 mode; - - /* Only the last cpu down does the final suspend steps */ - mode = readl(pmc + PMC_CTRL); - mode |= TEGRA_POWER_CPU_PWRREQ_OE; - writel(mode, pmc + PMC_CTRL); - - set_power_timers(cpu_on_time, cpu_off_time); + tegra_pmc_pm_set(TEGRA_SUSPEND_LP2); cpu_cluster_pm_enter(); suspend_cpu_complex(); @@ -216,4 +151,81 @@ void tegra_idle_lp2_last(u32 cpu_on_time, u32 cpu_off_time) restore_cpu_complex(); cpu_cluster_pm_exit(); } + +enum tegra_suspend_mode tegra_pm_validate_suspend_mode( + enum tegra_suspend_mode mode) +{ + /* Tegra114 didn't support any suspending mode yet. */ + if (tegra_chip_id == TEGRA114) + return TEGRA_SUSPEND_NONE; + + /* + * The Tegra devices only support suspending to LP2 currently. + */ + if (mode > TEGRA_SUSPEND_LP2) + return TEGRA_SUSPEND_LP2; + + return mode; +} + +static const char *lp_state[TEGRA_MAX_SUSPEND_MODE] = { + [TEGRA_SUSPEND_NONE] = "none", + [TEGRA_SUSPEND_LP2] = "LP2", + [TEGRA_SUSPEND_LP1] = "LP1", + [TEGRA_SUSPEND_LP0] = "LP0", +}; + +static int __cpuinit tegra_suspend_enter(suspend_state_t state) +{ + enum tegra_suspend_mode mode = tegra_pmc_get_suspend_mode(); + + if (WARN_ON(mode < TEGRA_SUSPEND_NONE || + mode >= TEGRA_MAX_SUSPEND_MODE)) + return -EINVAL; + + pr_info("Entering suspend state %s\n", lp_state[mode]); + + tegra_pmc_pm_set(mode); + + local_fiq_disable(); + + suspend_cpu_complex(); + switch (mode) { + case TEGRA_SUSPEND_LP2: + tegra_set_cpu_in_lp2(0); + break; + default: + break; + } + + cpu_suspend(PHYS_OFFSET - PAGE_OFFSET, &tegra_sleep_cpu); + + switch (mode) { + case TEGRA_SUSPEND_LP2: + tegra_clear_cpu_in_lp2(0); + break; + default: + break; + } + restore_cpu_complex(); + + local_fiq_enable(); + + return 0; +} + +static const struct platform_suspend_ops tegra_suspend_ops = { + .valid = suspend_valid_only_mem, + .enter = tegra_suspend_enter, +}; + +void __init tegra_init_suspend(void) +{ + if (tegra_pmc_get_suspend_mode() == TEGRA_SUSPEND_NONE) + return; + + tegra_pmc_suspend_init(); + + suspend_set_ops(&tegra_suspend_ops); +} #endif diff --git a/arch/arm/mach-tegra/pm.h b/arch/arm/mach-tegra/pm.h index 787335c..9d2d038 100644 --- a/arch/arm/mach-tegra/pm.h +++ b/arch/arm/mach-tegra/pm.h @@ -21,6 +21,8 @@ #ifndef _MACH_TEGRA_PM_H_ #define _MACH_TEGRA_PM_H_ +#include "pmc.h" + extern unsigned long l2x0_saved_regs_addr; void save_cpu_arch_register(void); @@ -29,7 +31,20 @@ void restore_cpu_arch_register(void); void tegra_clear_cpu_in_lp2(int phy_cpu_id); bool tegra_set_cpu_in_lp2(int phy_cpu_id); -void tegra_idle_lp2_last(u32 cpu_on_time, u32 cpu_off_time); +void tegra_idle_lp2_last(void); extern void (*tegra_tear_down_cpu)(void); +#ifdef CONFIG_PM_SLEEP +enum tegra_suspend_mode tegra_pm_validate_suspend_mode( + enum tegra_suspend_mode mode); +void tegra_init_suspend(void); +#else +enum tegra_suspend_mode tegra_pm_validate_suspend_mode( + enum tegra_suspend_mode mode) +{ + return TEGRA_SUSPEND_NONE; +} +static inline void tegra_init_suspend(void) {} +#endif + #endif /* _MACH_TEGRA_PM_H_ */ diff --git a/arch/arm/mach-tegra/pmc.c b/arch/arm/mach-tegra/pmc.c index d4fdb5f..32360e5 100644 --- a/arch/arm/mach-tegra/pmc.c +++ b/arch/arm/mach-tegra/pmc.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2012 NVIDIA CORPORATION. All rights reserved. + * Copyright (C) 2012,2013 NVIDIA CORPORATION. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, @@ -16,59 +16,313 @@ */ #include <linux/kernel.h> +#include <linux/clk.h> #include <linux/io.h> #include <linux/of.h> +#include <linux/of_address.h> -#include "iomap.h" +#include "fuse.h" +#include "pm.h" +#include "pmc.h" +#include "sleep.h" -#define PMC_CTRL 0x0 -#define PMC_CTRL_INTR_LOW (1 << 17) +#define TEGRA_POWER_EFFECT_LP0 (1 << 14) /* LP0 when CPU pwr gated */ +#define TEGRA_POWER_CPU_PWRREQ_POLARITY (1 << 15) /* CPU pwr req polarity */ +#define TEGRA_POWER_CPU_PWRREQ_OE (1 << 16) /* CPU pwr req enable */ + +#define PMC_CTRL 0x0 +#define PMC_CTRL_INTR_LOW (1 << 17) +#define PMC_PWRGATE_TOGGLE 0x30 +#define PMC_PWRGATE_TOGGLE_START (1 << 8) +#define PMC_REMOVE_CLAMPING 0x34 +#define PMC_PWRGATE_STATUS 0x38 + +#define PMC_CPUPWRGOOD_TIMER 0xc8 +#define PMC_CPUPWROFF_TIMER 0xcc + +#define TEGRA_POWERGATE_PCIE 3 +#define TEGRA_POWERGATE_VDEC 4 +#define TEGRA_POWERGATE_CPU1 9 +#define TEGRA_POWERGATE_CPU2 10 +#define TEGRA_POWERGATE_CPU3 11 + +static u8 tegra_cpu_domains[] = { + 0xFF, /* not available for CPU0 */ + TEGRA_POWERGATE_CPU1, + TEGRA_POWERGATE_CPU2, + TEGRA_POWERGATE_CPU3, +}; +static DEFINE_SPINLOCK(tegra_powergate_lock); + +static void __iomem *tegra_pmc_base; +static bool tegra_pmc_invert_interrupt; +static struct clk *tegra_pclk; + +struct pmc_pm_data { + u32 cpu_good_time; /* CPU power good time in uS */ + u32 cpu_off_time; /* CPU power off time in uS */ + u32 core_osc_time; /* Core power good osc time in uS */ + u32 core_pmu_time; /* Core power good pmu time in uS */ + u32 core_off_time; /* Core power off time in uS */ + bool corereq_high; /* Core power request active-high */ + bool sysclkreq_high; /* System clock request active-high */ + bool combined_req; /* Combined pwr req for CPU & Core */ + bool cpu_pwr_good_en; /* CPU power good signal is enabled */ + u32 lp0_vec_phy_addr; /* The phy addr of LP0 warm boot code */ + u32 lp0_vec_size; /* The size of LP0 warm boot code */ + enum tegra_suspend_mode suspend_mode; +}; +static struct pmc_pm_data pmc_pm_data; static inline u32 tegra_pmc_readl(u32 reg) { - return readl(IO_ADDRESS(TEGRA_PMC_BASE + reg)); + return readl(tegra_pmc_base + reg); } static inline void tegra_pmc_writel(u32 val, u32 reg) { - writel(val, IO_ADDRESS(TEGRA_PMC_BASE + reg)); + writel(val, tegra_pmc_base + reg); +} + +static int tegra_pmc_get_cpu_powerdomain_id(int cpuid) +{ + if (cpuid <= 0 || cpuid >= num_possible_cpus()) + return -EINVAL; + return tegra_cpu_domains[cpuid]; +} + +static bool tegra_pmc_powergate_is_powered(int id) +{ + return (tegra_pmc_readl(PMC_PWRGATE_STATUS) >> id) & 1; +} + +static int tegra_pmc_powergate_set(int id, bool new_state) +{ + bool old_state; + unsigned long flags; + + spin_lock_irqsave(&tegra_powergate_lock, flags); + + old_state = tegra_pmc_powergate_is_powered(id); + WARN_ON(old_state == new_state); + + tegra_pmc_writel(PMC_PWRGATE_TOGGLE_START | id, PMC_PWRGATE_TOGGLE); + + spin_unlock_irqrestore(&tegra_powergate_lock, flags); + + return 0; +} + +static int tegra_pmc_powergate_remove_clamping(int id) +{ + u32 mask; + + /* + * Tegra has a bug where PCIE and VDE clamping masks are + * swapped relatively to the partition ids. + */ + if (id == TEGRA_POWERGATE_VDEC) + mask = (1 << TEGRA_POWERGATE_PCIE); + else if (id == TEGRA_POWERGATE_PCIE) + mask = (1 << TEGRA_POWERGATE_VDEC); + else + mask = (1 << id); + + tegra_pmc_writel(mask, PMC_REMOVE_CLAMPING); + + return 0; +} + +bool tegra_pmc_cpu_is_powered(int cpuid) +{ + int id; + + id = tegra_pmc_get_cpu_powerdomain_id(cpuid); + if (id < 0) + return false; + return tegra_pmc_powergate_is_powered(id); } -#ifdef CONFIG_OF +int tegra_pmc_cpu_power_on(int cpuid) +{ + int id; + + id = tegra_pmc_get_cpu_powerdomain_id(cpuid); + if (id < 0) + return id; + return tegra_pmc_powergate_set(id, true); +} + +int tegra_pmc_cpu_remove_clamping(int cpuid) +{ + int id; + + id = tegra_pmc_get_cpu_powerdomain_id(cpuid); + if (id < 0) + return id; + return tegra_pmc_powergate_remove_clamping(id); +} + +#ifdef CONFIG_PM_SLEEP +static void set_power_timers(u32 us_on, u32 us_off, unsigned long rate) +{ + unsigned long long ticks; + unsigned long long pclk; + static unsigned long tegra_last_pclk; + + if (WARN_ON_ONCE(rate <= 0)) + pclk = 100000000; + else + pclk = rate; + + if ((rate != tegra_last_pclk)) { + ticks = (us_on * pclk) + 999999ull; + do_div(ticks, 1000000); + tegra_pmc_writel((unsigned long)ticks, PMC_CPUPWRGOOD_TIMER); + + ticks = (us_off * pclk) + 999999ull; + do_div(ticks, 1000000); + tegra_pmc_writel((unsigned long)ticks, PMC_CPUPWROFF_TIMER); + wmb(); + } + tegra_last_pclk = pclk; +} + +enum tegra_suspend_mode tegra_pmc_get_suspend_mode(void) +{ + return pmc_pm_data.suspend_mode; +} + +void tegra_pmc_pm_set(enum tegra_suspend_mode mode) +{ + u32 reg; + unsigned long rate = 0; + + reg = tegra_pmc_readl(PMC_CTRL); + reg |= TEGRA_POWER_CPU_PWRREQ_OE; + reg &= ~TEGRA_POWER_EFFECT_LP0; + + switch (mode) { + case TEGRA_SUSPEND_LP2: + rate = clk_get_rate(tegra_pclk); + break; + default: + break; + } + + set_power_timers(pmc_pm_data.cpu_good_time, pmc_pm_data.cpu_off_time, + rate); + + tegra_pmc_writel(reg, PMC_CTRL); +} + +void tegra_pmc_suspend_init(void) +{ + u32 reg; + + /* Always enable CPU power request */ + reg = tegra_pmc_readl(PMC_CTRL); + reg |= TEGRA_POWER_CPU_PWRREQ_OE; + tegra_pmc_writel(reg, PMC_CTRL); +} +#endif + static const struct of_device_id matches[] __initconst = { + { .compatible = "nvidia,tegra114-pmc" }, + { .compatible = "nvidia,tegra30-pmc" }, { .compatible = "nvidia,tegra20-pmc" }, { } }; -#endif -void __init tegra_pmc_init(void) +static void tegra_pmc_parse_dt(void) { - /* - * For now, Harmony is the only board that uses the PMC, and it wants - * the signal inverted. Seaboard would too if it used the PMC. - * Hopefully by the time other boards want to use the PMC, everything - * will be device-tree, or they also want it inverted. - */ - bool invert_interrupt = true; - u32 val; + struct device_node *np; + u32 prop; + enum tegra_suspend_mode suspend_mode; + u32 core_good_time[2] = {0, 0}; + u32 lp0_vec[2] = {0, 0}; -#ifdef CONFIG_OF - if (of_have_populated_dt()) { - struct device_node *np; + np = of_find_matching_node(NULL, matches); + BUG_ON(!np); - invert_interrupt = false; + tegra_pmc_base = of_iomap(np, 0); - np = of_find_matching_node(NULL, matches); - if (np) { - if (of_find_property(np, "nvidia,invert-interrupt", - NULL)) - invert_interrupt = true; + tegra_pmc_invert_interrupt = of_property_read_bool(np, + "nvidia,invert-interrupt"); + tegra_pclk = of_clk_get_by_name(np, "pclk"); + WARN_ON(IS_ERR(tegra_pclk)); + + /* Grabbing the power management configurations */ + if (of_property_read_u32(np, "nvidia,suspend-mode", &prop)) { + suspend_mode = TEGRA_SUSPEND_NONE; + } else { + switch (prop) { + case 0: + suspend_mode = TEGRA_SUSPEND_LP0; + break; + case 1: + suspend_mode = TEGRA_SUSPEND_LP1; + break; + case 2: + suspend_mode = TEGRA_SUSPEND_LP2; + break; + default: + suspend_mode = TEGRA_SUSPEND_NONE; + break; } } -#endif + suspend_mode = tegra_pm_validate_suspend_mode(suspend_mode); + + if (of_property_read_u32(np, "nvidia,cpu-pwr-good-time", &prop)) + suspend_mode = TEGRA_SUSPEND_NONE; + pmc_pm_data.cpu_good_time = prop; + + if (of_property_read_u32(np, "nvidia,cpu-pwr-off-time", &prop)) + suspend_mode = TEGRA_SUSPEND_NONE; + pmc_pm_data.cpu_off_time = prop; + + if (of_property_read_u32_array(np, "nvidia,core-pwr-good-time", + core_good_time, ARRAY_SIZE(core_good_time))) + suspend_mode = TEGRA_SUSPEND_NONE; + pmc_pm_data.core_osc_time = core_good_time[0]; + pmc_pm_data.core_pmu_time = core_good_time[1]; + + if (of_property_read_u32(np, "nvidia,core-pwr-off-time", + &prop)) + suspend_mode = TEGRA_SUSPEND_NONE; + pmc_pm_data.core_off_time = prop; + + pmc_pm_data.corereq_high = of_property_read_bool(np, + "nvidia,core-power-req-active-high"); + + pmc_pm_data.sysclkreq_high = of_property_read_bool(np, + "nvidia,sys-clock-req-active-high"); + + pmc_pm_data.combined_req = of_property_read_bool(np, + "nvidia,combined-power-req"); + + pmc_pm_data.cpu_pwr_good_en = of_property_read_bool(np, + "nvidia,cpu-pwr-good-en"); + + if (of_property_read_u32_array(np, "nvidia,lp0-vec", lp0_vec, + ARRAY_SIZE(lp0_vec))) + if (suspend_mode == TEGRA_SUSPEND_LP0) + suspend_mode = TEGRA_SUSPEND_LP1; + + pmc_pm_data.lp0_vec_phy_addr = lp0_vec[0]; + pmc_pm_data.lp0_vec_size = lp0_vec[1]; + + pmc_pm_data.suspend_mode = suspend_mode; +} + +void __init tegra_pmc_init(void) +{ + u32 val; + + tegra_pmc_parse_dt(); val = tegra_pmc_readl(PMC_CTRL); - if (invert_interrupt) + if (tegra_pmc_invert_interrupt) val |= PMC_CTRL_INTR_LOW; else val &= ~PMC_CTRL_INTR_LOW; diff --git a/arch/arm/mach-tegra/pmc.h b/arch/arm/mach-tegra/pmc.h index 8995ee4..e1c2df2 100644 --- a/arch/arm/mach-tegra/pmc.h +++ b/arch/arm/mach-tegra/pmc.h @@ -18,6 +18,24 @@ #ifndef __MACH_TEGRA_PMC_H #define __MACH_TEGRA_PMC_H +enum tegra_suspend_mode { + TEGRA_SUSPEND_NONE = 0, + TEGRA_SUSPEND_LP2, /* CPU voltage off */ + TEGRA_SUSPEND_LP1, /* CPU voltage off, DRAM self-refresh */ + TEGRA_SUSPEND_LP0, /* CPU + core voltage off, DRAM self-refresh */ + TEGRA_MAX_SUSPEND_MODE, +}; + +#ifdef CONFIG_PM_SLEEP +enum tegra_suspend_mode tegra_pmc_get_suspend_mode(void); +void tegra_pmc_pm_set(enum tegra_suspend_mode mode); +void tegra_pmc_suspend_init(void); +#endif + +bool tegra_pmc_cpu_is_powered(int cpuid); +int tegra_pmc_cpu_power_on(int cpuid); +int tegra_pmc_cpu_remove_clamping(int cpuid); + void tegra_pmc_init(void); #endif diff --git a/arch/arm/mach-tegra/reset-handler.S b/arch/arm/mach-tegra/reset-handler.S index 54382ce..1676aba5e7 100644 --- a/arch/arm/mach-tegra/reset-handler.S +++ b/arch/arm/mach-tegra/reset-handler.S @@ -41,9 +41,6 @@ */ ENTRY(tegra_resume) bl v7_invalidate_l1 - /* Enable coresight */ - mov32 r0, 0xC5ACCE55 - mcr p14, 0, r0, c7, c12, 6 cpu_id r0 cmp r0, #0 @ CPU0? @@ -99,6 +96,8 @@ ENTRY(__tegra_cpu_reset_handler_start) * * Register usage within the reset handler: * + * Others: scratch + * R6 = SoC ID << 8 * R7 = CPU present (to the OS) mask * R8 = CPU in LP1 state mask * R9 = CPU in LP2 state mask @@ -114,6 +113,40 @@ ENTRY(__tegra_cpu_reset_handler_start) ENTRY(__tegra_cpu_reset_handler) cpsid aif, 0x13 @ SVC mode, interrupts disabled + + mov32 r6, TEGRA_APB_MISC_BASE + ldr r6, [r6, #APB_MISC_GP_HIDREV] + and r6, r6, #0xff00 +#ifdef CONFIG_ARCH_TEGRA_2x_SOC +t20_check: + cmp r6, #(0x20 << 8) + bne after_t20_check +t20_errata: + # Tegra20 is a Cortex-A9 r1p1 + mrc p15, 0, r0, c1, c0, 0 @ read system control register + orr r0, r0, #1 << 14 @ erratum 716044 + mcr p15, 0, r0, c1, c0, 0 @ write system control register + mrc p15, 0, r0, c15, c0, 1 @ read diagnostic register + orr r0, r0, #1 << 4 @ erratum 742230 + orr r0, r0, #1 << 11 @ erratum 751472 + mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register + b after_errata +after_t20_check: +#endif +#ifdef CONFIG_ARCH_TEGRA_3x_SOC +t30_check: + cmp r6, #(0x30 << 8) + bne after_t30_check +t30_errata: + # Tegra30 is a Cortex-A9 r2p9 + mrc p15, 0, r0, c15, c0, 1 @ read diagnostic register + orr r0, r0, #1 << 6 @ erratum 743622 + orr r0, r0, #1 << 11 @ erratum 751472 + mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register + b after_errata +after_t30_check: +#endif +after_errata: mrc p15, 0, r10, c0, c0, 5 @ MPIDR and r10, r10, #0x3 @ R10 = CPU number mov r11, #1 @@ -129,16 +162,13 @@ ENTRY(__tegra_cpu_reset_handler) #ifdef CONFIG_ARCH_TEGRA_2x_SOC /* Are we on Tegra20? */ - mov32 r6, TEGRA_APB_MISC_BASE - ldr r0, [r6, #APB_MISC_GP_HIDREV] - and r0, r0, #0xff00 - cmp r0, #(0x20 << 8) + cmp r6, #(0x20 << 8) bne 1f /* If not CPU0, don't let CPU0 reset CPU1 now that CPU1 is coming up. */ - mov32 r6, TEGRA_PMC_BASE + mov32 r5, TEGRA_PMC_BASE mov r0, #0 cmp r10, #0 - strne r0, [r6, #PMC_SCRATCH41] + strne r0, [r5, #PMC_SCRATCH41] 1: #endif diff --git a/arch/arm/mach-tegra/sleep.h b/arch/arm/mach-tegra/sleep.h index 4ffae54..970ebd5 100644 --- a/arch/arm/mach-tegra/sleep.h +++ b/arch/arm/mach-tegra/sleep.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2010-2012, NVIDIA Corporation. All rights reserved. + * Copyright (c) 2010-2013, NVIDIA Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, @@ -124,11 +124,11 @@ int tegra_sleep_cpu_finish(unsigned long); void tegra_disable_clean_inv_dcache(void); #ifdef CONFIG_HOTPLUG_CPU -void tegra20_hotplug_init(void); -void tegra30_hotplug_init(void); +void tegra20_hotplug_shutdown(void); +void tegra30_hotplug_shutdown(void); +void tegra_hotplug_init(void); #else -static inline void tegra20_hotplug_init(void) {} -static inline void tegra30_hotplug_init(void) {} +static inline void tegra_hotplug_init(void) {} #endif void tegra20_cpu_shutdown(int cpu); diff --git a/arch/arm/mach-tegra/board-dt-tegra20.c b/arch/arm/mach-tegra/tegra.c index a0edf25..61749e2 100644 --- a/arch/arm/mach-tegra/board-dt-tegra20.c +++ b/arch/arm/mach-tegra/tegra.c @@ -1,6 +1,7 @@ /* - * nVidia Tegra device tree board support + * NVIDIA Tegra SoC device tree board support * + * Copyright (C) 2011, 2013, NVIDIA Corporation * Copyright (C) 2010 Secret Lab Technologies, Ltd. * Copyright (C) 2010 Google, Inc. * @@ -32,7 +33,10 @@ #include <linux/io.h> #include <linux/i2c.h> #include <linux/i2c-tegra.h> +#include <linux/slab.h> +#include <linux/sys_soc.h> #include <linux/usb/tegra_usb_phy.h> +#include <linux/clk/tegra.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -41,6 +45,7 @@ #include "board.h" #include "common.h" +#include "fuse.h" #include "iomap.h" static struct tegra_ehci_platform_data tegra_ehci1_pdata = { @@ -79,12 +84,38 @@ static struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = { static void __init tegra_dt_init(void) { + struct soc_device_attribute *soc_dev_attr; + struct soc_device *soc_dev; + struct device *parent = NULL; + + tegra_clocks_apply_init_table(); + + soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); + if (!soc_dev_attr) + goto out; + + soc_dev_attr->family = kasprintf(GFP_KERNEL, "Tegra"); + soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%d", tegra_revision); + soc_dev_attr->soc_id = kasprintf(GFP_KERNEL, "%d", tegra_chip_id); + + soc_dev = soc_device_register(soc_dev_attr); + if (IS_ERR(soc_dev)) { + kfree(soc_dev_attr->family); + kfree(soc_dev_attr->revision); + kfree(soc_dev_attr->soc_id); + kfree(soc_dev_attr); + goto out; + } + + parent = soc_device_to_device(soc_dev); + /* * Finished with the static registrations now; fill in the missing * devices */ +out: of_platform_populate(NULL, of_default_bus_match_table, - tegra20_auxdata_lookup, NULL); + tegra20_auxdata_lookup, parent); } static void __init trimslice_init(void) @@ -111,7 +142,8 @@ static void __init harmony_init(void) static void __init paz00_init(void) { - tegra_paz00_wifikill_init(); + if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC)) + tegra_paz00_wifikill_init(); } static struct { @@ -137,19 +169,21 @@ static void __init tegra_dt_init_late(void) } } -static const char *tegra20_dt_board_compat[] = { +static const char * const tegra_dt_board_compat[] = { + "nvidia,tegra114", + "nvidia,tegra30", "nvidia,tegra20", NULL }; -DT_MACHINE_START(TEGRA_DT, "nVidia Tegra20 (Flattened Device Tree)") +DT_MACHINE_START(TEGRA_DT, "NVIDIA Tegra SoC (Flattened Device Tree)") .map_io = tegra_map_common_io, .smp = smp_ops(tegra_smp_ops), - .init_early = tegra20_init_early, + .init_early = tegra_init_early, .init_irq = tegra_dt_init_irq, .init_time = clocksource_of_init, .init_machine = tegra_dt_init, .init_late = tegra_dt_init_late, .restart = tegra_assert_system_reset, - .dt_compat = tegra20_dt_board_compat, + .dt_compat = tegra_dt_board_compat, MACHINE_END diff --git a/arch/arm/mach-tegra/tegra114_speedo.c b/arch/arm/mach-tegra/tegra114_speedo.c new file mode 100644 index 0000000..5218d48 --- /dev/null +++ b/arch/arm/mach-tegra/tegra114_speedo.c @@ -0,0 +1,104 @@ +/* + * Copyright (c) 2013, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/kernel.h> +#include <linux/bug.h> + +#include "fuse.h" + +#define CORE_PROCESS_CORNERS_NUM 2 +#define CPU_PROCESS_CORNERS_NUM 2 + +enum { + THRESHOLD_INDEX_0, + THRESHOLD_INDEX_1, + THRESHOLD_INDEX_COUNT, +}; + +static const u32 core_process_speedos[][CORE_PROCESS_CORNERS_NUM] = { + {1123, UINT_MAX}, + {0, UINT_MAX}, +}; + +static const u32 cpu_process_speedos[][CPU_PROCESS_CORNERS_NUM] = { + {1695, UINT_MAX}, + {0, UINT_MAX}, +}; + +static void rev_sku_to_speedo_ids(int rev, int sku, int *threshold) +{ + u32 tmp; + + switch (sku) { + case 0x00: + case 0x10: + case 0x05: + case 0x06: + tegra_cpu_speedo_id = 1; + tegra_soc_speedo_id = 0; + *threshold = THRESHOLD_INDEX_0; + break; + + case 0x03: + case 0x04: + tegra_cpu_speedo_id = 2; + tegra_soc_speedo_id = 1; + *threshold = THRESHOLD_INDEX_1; + break; + + default: + pr_err("Tegra114 Unknown SKU %d\n", sku); + tegra_cpu_speedo_id = 0; + tegra_soc_speedo_id = 0; + *threshold = THRESHOLD_INDEX_0; + break; + } + + if (rev == TEGRA_REVISION_A01) { + tmp = tegra_fuse_readl(0x270) << 1; + tmp |= tegra_fuse_readl(0x26c); + if (!tmp) + tegra_cpu_speedo_id = 0; + } +} + +void tegra114_init_speedo_data(void) +{ + u32 cpu_speedo_val; + u32 core_speedo_val; + int threshold; + int i; + + BUILD_BUG_ON(ARRAY_SIZE(cpu_process_speedos) != + THRESHOLD_INDEX_COUNT); + BUILD_BUG_ON(ARRAY_SIZE(core_process_speedos) != + THRESHOLD_INDEX_COUNT); + + rev_sku_to_speedo_ids(tegra_revision, tegra_sku_id, &threshold); + + cpu_speedo_val = tegra_fuse_readl(0x12c) + 1024; + core_speedo_val = tegra_fuse_readl(0x134); + + for (i = 0; i < CPU_PROCESS_CORNERS_NUM; i++) + if (cpu_speedo_val < cpu_process_speedos[threshold][i]) + break; + tegra_cpu_process_id = i; + + for (i = 0; i < CORE_PROCESS_CORNERS_NUM; i++) + if (core_speedo_val < core_process_speedos[threshold][i]) + break; + tegra_core_process_id = i; +} diff --git a/arch/arm/mach-tegra/tegra2_emc.c b/arch/arm/mach-tegra/tegra2_emc.c index ce7ce42..9e8bdfa 100644 --- a/arch/arm/mach-tegra/tegra2_emc.c +++ b/arch/arm/mach-tegra/tegra2_emc.c @@ -276,7 +276,7 @@ static struct tegra_emc_pdata *tegra_emc_fill_pdata(struct platform_device *pdev int i; WARN_ON(pdev->dev.platform_data); - BUG_ON(IS_ERR_OR_NULL(c)); + BUG_ON(IS_ERR(c)); pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); pdata->tables = devm_kzalloc(&pdev->dev, sizeof(*pdata->tables), diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c index 0a3f30d..152ae38 100644 --- a/arch/arm/mach-ux500/board-mop500-pins.c +++ b/arch/arm/mach-ux500/board-mop500-pins.c @@ -48,8 +48,12 @@ BIAS(slpm_in_nopull_wkup, PIN_SLEEPMODE_ENABLED| PIN_SLPM_DIR_INPUT|PIN_SLPM_PULL_NONE|PIN_SLPM_WAKEUP_ENABLE); BIAS(slpm_in_wkup_pdis, PIN_SLEEPMODE_ENABLED| PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); +BIAS(slpm_in_wkup_pdis_en, PIN_SLEEPMODE_ENABLED| + PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_ENABLED); BIAS(slpm_wkup_pdis, PIN_SLEEPMODE_ENABLED| PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); +BIAS(slpm_wkup_pdis_en, PIN_SLEEPMODE_ENABLED| + PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_ENABLED); BIAS(slpm_out_lo_pdis, PIN_SLEEPMODE_ENABLED| PIN_SLPM_OUTPUT_LOW|PIN_SLPM_WAKEUP_DISABLE|PIN_SLPM_PDIS_DISABLED); BIAS(slpm_out_lo_wkup, PIN_SLEEPMODE_ENABLED| @@ -78,9 +82,6 @@ BIAS(out_wkup_pdis, PIN_SLPM_DIR_OUTPUT|PIN_SLPM_WAKEUP_ENABLE| PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-db8500", group, func) #define DB8500_PIN_HOG(pin,conf) \ PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-db8500", pin, conf) -#define DB8500_PIN_SLEEP(pin, conf, dev) \ - PIN_MAP_CONFIGS_PIN(dev, PINCTRL_STATE_SLEEP, "pinctrl-db8500", \ - pin, conf) /* These are default states associated with device and changed runtime */ #define DB8500_MUX(group,func,dev) \ @@ -309,8 +310,23 @@ static struct pinctrl_map __initdata mop500_family_pinmap[] = { DB8500_PIN_SLEEP("GPIO207_AJ23", slpm_in_wkup_pdis, "sdi4"), /* DAT4 */ /* Mux in USB pins, drive STP high */ - DB8500_MUX("usb_a_1", "usb", "musb-ux500.0"), - DB8500_PIN("GPIO257_AE29", out_hi, "musb-ux500.0"), /* STP */ + /* USB default state */ + DB8500_MUX("usb_a_1", "usb", "ab8500-usb.0"), + DB8500_PIN("GPIO257_AE29", out_hi, "ab8500-usb.0"), /* STP */ + /* USB sleep state */ + DB8500_PIN_SLEEP("GPIO256_AF28", slpm_wkup_pdis_en, "ab8500-usb.0"), /* NXT */ + DB8500_PIN_SLEEP("GPIO257_AE29", slpm_out_hi_wkup_pdis, "ab8500-usb.0"), /* STP */ + DB8500_PIN_SLEEP("GPIO258_AD29", slpm_wkup_pdis_en, "ab8500-usb.0"), /* XCLK */ + DB8500_PIN_SLEEP("GPIO259_AC29", slpm_wkup_pdis_en, "ab8500-usb.0"), /* DIR */ + DB8500_PIN_SLEEP("GPIO260_AD28", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT7 */ + DB8500_PIN_SLEEP("GPIO261_AD26", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT6 */ + DB8500_PIN_SLEEP("GPIO262_AE26", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT5 */ + DB8500_PIN_SLEEP("GPIO263_AG29", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT4 */ + DB8500_PIN_SLEEP("GPIO264_AE27", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT3 */ + DB8500_PIN_SLEEP("GPIO265_AD27", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT2 */ + DB8500_PIN_SLEEP("GPIO266_AC28", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT1 */ + DB8500_PIN_SLEEP("GPIO267_AC27", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT0 */ + /* Mux in SPI2 pins on the "other C1" altfunction */ DB8500_MUX("spi2_oc1_2", "spi2", "spi2"), DB8500_PIN("GPIO216_AG12", gpio_out_hi, "spi2"), /* FRM */ @@ -318,9 +334,9 @@ static struct pinctrl_map __initdata mop500_family_pinmap[] = { DB8500_PIN("GPIO215_AH13", out_lo, "spi2"), /* TXD */ DB8500_PIN("GPIO217_AH12", out_lo, "spi2"), /* CLK */ /* SPI2 idle state */ - DB8500_PIN_SLEEP("GPIO218_AH11", slpm_in_wkup_pdis, "spi2"), /* RXD */ - DB8500_PIN_SLEEP("GPIO215_AH13", slpm_out_lo_wkup_pdis, "spi2"), /* TXD */ - DB8500_PIN_SLEEP("GPIO217_AH12", slpm_wkup_pdis, "spi2"), /* CLK */ + DB8500_PIN_IDLE("GPIO218_AH11", slpm_in_wkup_pdis, "spi2"), /* RXD */ + DB8500_PIN_IDLE("GPIO215_AH13", slpm_out_lo_wkup_pdis, "spi2"), /* TXD */ + DB8500_PIN_IDLE("GPIO217_AH12", slpm_wkup_pdis, "spi2"), /* CLK */ /* SPI2 sleep state */ DB8500_PIN_SLEEP("GPIO216_AG12", slpm_in_wkup_pdis, "spi2"), /* FRM */ DB8500_PIN_SLEEP("GPIO218_AH11", slpm_in_wkup_pdis, "spi2"), /* RXD */ @@ -747,6 +763,8 @@ static struct pinctrl_map __initdata snowball_pinmap[] = { DB8500_PIN_HOG("GPIO21_AB3", out_hi), /* Mux in "SM" which is used for the SMSC911x Ethernet adapter */ DB8500_MUX_HOG("sm_b_1", "sm"), + /* User LED */ + DB8500_PIN_HOG("GPIO142_C11", gpio_out_hi), /* Drive RSTn_LAN high */ DB8500_PIN_HOG("GPIO141_C12", gpio_out_hi), /* Accelerometer/Magnetometer */ diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c index 537870d..002da9a 100644 --- a/arch/arm/mach-ux500/cpu.c +++ b/arch/arm/mach-ux500/cpu.c @@ -140,14 +140,13 @@ struct device * __init ux500_soc_device_init(const char *soc_id) soc_info_populate(soc_dev_attr, soc_id); soc_dev = soc_device_register(soc_dev_attr); - if (IS_ERR_OR_NULL(soc_dev)) { + if (IS_ERR(soc_dev)) { kfree(soc_dev_attr); return NULL; } parent = soc_device_to_device(soc_dev); - if (!IS_ERR_OR_NULL(parent)) - device_create_file(parent, &ux500_soc_attr); + device_create_file(parent, &ux500_soc_attr); return parent; } diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c index a6af0b8..d07bbe7 100644 --- a/arch/arm/mach-ux500/timer.c +++ b/arch/arm/mach-ux500/timer.c @@ -7,6 +7,7 @@ #include <linux/io.h> #include <linux/errno.h> #include <linux/clksrc-dbx500-prcmu.h> +#include <linux/clocksource.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/platform_data/clocksource-nomadik-mtu.h> @@ -32,7 +33,7 @@ static void __init ux500_twd_init(void) twd_local_timer = &u8500_twd_local_timer; if (of_have_populated_dt()) - twd_local_timer_of_register(); + clocksource_of_init(); else { err = twd_local_timer_register(twd_local_timer); if (err) diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index 915683c..d0ad789 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -5,6 +5,7 @@ #include <linux/amba/bus.h> #include <linux/amba/mmci.h> #include <linux/io.h> +#include <linux/clocksource.h> #include <linux/smp.h> #include <linux/init.h> #include <linux/irqchip.h> @@ -25,7 +26,6 @@ #include <asm/arch_timer.h> #include <asm/mach-types.h> #include <asm/sizes.h> -#include <asm/smp_twd.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/time.h> @@ -435,6 +435,7 @@ static void __init v2m_dt_timer_init(void) vexpress_clk_of_init(); + clocksource_of_init(); do { node = of_find_compatible_node(node, NULL, "arm,sp804"); } while (node && vexpress_get_site_by_node(node) != VEXPRESS_SITE_MB); @@ -445,8 +446,7 @@ static void __init v2m_dt_timer_init(void) irq_of_parse_and_map(node, 0)); } - if (arch_timer_of_register() != 0) - twd_local_timer_of_register(); + arch_timer_of_register(); if (arch_timer_sched_clock_init() != 0) versatile_sched_clock_init(vexpress_get_24mhz_clock_base(), diff --git a/arch/arm/mach-vt8500/Kconfig b/arch/arm/mach-vt8500/Kconfig index e3e94b2..9b25293 100644 --- a/arch/arm/mach-vt8500/Kconfig +++ b/arch/arm/mach-vt8500/Kconfig @@ -7,6 +7,7 @@ config ARCH_VT8500 select GENERIC_CLOCKEVENTS select HAVE_CLK select VT8500_TIMER + select PINCTRL help Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip. diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig index adb6c0e..d70651e 100644 --- a/arch/arm/mach-zynq/Kconfig +++ b/arch/arm/mach-zynq/Kconfig @@ -9,5 +9,6 @@ config ARCH_ZYNQ select MIGHT_HAVE_CACHE_L2X0 select USE_OF select SPARSE_IRQ + select CADENCE_TTC_TIMER help Support for Xilinx Zynq ARM Cortex A9 Platform diff --git a/arch/arm/mach-zynq/Makefile b/arch/arm/mach-zynq/Makefile index 397268c..320faed 100644 --- a/arch/arm/mach-zynq/Makefile +++ b/arch/arm/mach-zynq/Makefile @@ -3,4 +3,4 @@ # # Common support -obj-y := common.o timer.o +obj-y := common.o diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c index 5c89832..68e0907 100644 --- a/arch/arm/mach-zynq/common.c +++ b/arch/arm/mach-zynq/common.c @@ -20,6 +20,7 @@ #include <linux/platform_device.h> #include <linux/clk.h> #include <linux/clk/zynq.h> +#include <linux/clocksource.h> #include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/of_platform.h> @@ -77,7 +78,7 @@ static void __init xilinx_zynq_timer_init(void) xilinx_zynq_clocks_init(slcr); - xttcps_timer_init(); + clocksource_of_init(); } /** diff --git a/arch/arm/mach-zynq/common.h b/arch/arm/mach-zynq/common.h index 8b4dbba..5050bb1 100644 --- a/arch/arm/mach-zynq/common.h +++ b/arch/arm/mach-zynq/common.h @@ -17,6 +17,4 @@ #ifndef __MACH_ZYNQ_COMMON_H__ #define __MACH_ZYNQ_COMMON_H__ -void __init xttcps_timer_init(void); - #endif diff --git a/arch/arm/mach-zynq/timer.c b/arch/arm/mach-zynq/timer.c deleted file mode 100644 index f9fbc9c..0000000 --- a/arch/arm/mach-zynq/timer.c +++ /dev/null @@ -1,324 +0,0 @@ -/* - * This file contains driver for the Xilinx PS Timer Counter IP. - * - * Copyright (C) 2011 Xilinx - * - * based on arch/mips/kernel/time.c timer driver - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/interrupt.h> -#include <linux/clockchips.h> -#include <linux/of_address.h> -#include <linux/of_irq.h> -#include <linux/slab.h> -#include <linux/clk-provider.h> -#include "common.h" - -/* - * Timer Register Offset Definitions of Timer 1, Increment base address by 4 - * and use same offsets for Timer 2 - */ -#define XTTCPS_CLK_CNTRL_OFFSET 0x00 /* Clock Control Reg, RW */ -#define XTTCPS_CNT_CNTRL_OFFSET 0x0C /* Counter Control Reg, RW */ -#define XTTCPS_COUNT_VAL_OFFSET 0x18 /* Counter Value Reg, RO */ -#define XTTCPS_INTR_VAL_OFFSET 0x24 /* Interval Count Reg, RW */ -#define XTTCPS_ISR_OFFSET 0x54 /* Interrupt Status Reg, RO */ -#define XTTCPS_IER_OFFSET 0x60 /* Interrupt Enable Reg, RW */ - -#define XTTCPS_CNT_CNTRL_DISABLE_MASK 0x1 - -/* - * Setup the timers to use pre-scaling, using a fixed value for now that will - * work across most input frequency, but it may need to be more dynamic - */ -#define PRESCALE_EXPONENT 11 /* 2 ^ PRESCALE_EXPONENT = PRESCALE */ -#define PRESCALE 2048 /* The exponent must match this */ -#define CLK_CNTRL_PRESCALE ((PRESCALE_EXPONENT - 1) << 1) -#define CLK_CNTRL_PRESCALE_EN 1 -#define CNT_CNTRL_RESET (1<<4) - -/** - * struct xttcps_timer - This definition defines local timer structure - * - * @base_addr: Base address of timer - **/ -struct xttcps_timer { - void __iomem *base_addr; -}; - -struct xttcps_timer_clocksource { - struct xttcps_timer xttc; - struct clocksource cs; -}; - -#define to_xttcps_timer_clksrc(x) \ - container_of(x, struct xttcps_timer_clocksource, cs) - -struct xttcps_timer_clockevent { - struct xttcps_timer xttc; - struct clock_event_device ce; - struct clk *clk; -}; - -#define to_xttcps_timer_clkevent(x) \ - container_of(x, struct xttcps_timer_clockevent, ce) - -/** - * xttcps_set_interval - Set the timer interval value - * - * @timer: Pointer to the timer instance - * @cycles: Timer interval ticks - **/ -static void xttcps_set_interval(struct xttcps_timer *timer, - unsigned long cycles) -{ - u32 ctrl_reg; - - /* Disable the counter, set the counter value and re-enable counter */ - ctrl_reg = __raw_readl(timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET); - ctrl_reg |= XTTCPS_CNT_CNTRL_DISABLE_MASK; - __raw_writel(ctrl_reg, timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET); - - __raw_writel(cycles, timer->base_addr + XTTCPS_INTR_VAL_OFFSET); - - /* - * Reset the counter (0x10) so that it starts from 0, one-shot - * mode makes this needed for timing to be right. - */ - ctrl_reg |= CNT_CNTRL_RESET; - ctrl_reg &= ~XTTCPS_CNT_CNTRL_DISABLE_MASK; - __raw_writel(ctrl_reg, timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET); -} - -/** - * xttcps_clock_event_interrupt - Clock event timer interrupt handler - * - * @irq: IRQ number of the Timer - * @dev_id: void pointer to the xttcps_timer instance - * - * returns: Always IRQ_HANDLED - success - **/ -static irqreturn_t xttcps_clock_event_interrupt(int irq, void *dev_id) -{ - struct xttcps_timer_clockevent *xttce = dev_id; - struct xttcps_timer *timer = &xttce->xttc; - - /* Acknowledge the interrupt and call event handler */ - __raw_readl(timer->base_addr + XTTCPS_ISR_OFFSET); - - xttce->ce.event_handler(&xttce->ce); - - return IRQ_HANDLED; -} - -/** - * __xttc_clocksource_read - Reads the timer counter register - * - * returns: Current timer counter register value - **/ -static cycle_t __xttc_clocksource_read(struct clocksource *cs) -{ - struct xttcps_timer *timer = &to_xttcps_timer_clksrc(cs)->xttc; - - return (cycle_t)__raw_readl(timer->base_addr + - XTTCPS_COUNT_VAL_OFFSET); -} - -/** - * xttcps_set_next_event - Sets the time interval for next event - * - * @cycles: Timer interval ticks - * @evt: Address of clock event instance - * - * returns: Always 0 - success - **/ -static int xttcps_set_next_event(unsigned long cycles, - struct clock_event_device *evt) -{ - struct xttcps_timer_clockevent *xttce = to_xttcps_timer_clkevent(evt); - struct xttcps_timer *timer = &xttce->xttc; - - xttcps_set_interval(timer, cycles); - return 0; -} - -/** - * xttcps_set_mode - Sets the mode of timer - * - * @mode: Mode to be set - * @evt: Address of clock event instance - **/ -static void xttcps_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) -{ - struct xttcps_timer_clockevent *xttce = to_xttcps_timer_clkevent(evt); - struct xttcps_timer *timer = &xttce->xttc; - u32 ctrl_reg; - - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - xttcps_set_interval(timer, - DIV_ROUND_CLOSEST(clk_get_rate(xttce->clk), - PRESCALE * HZ)); - break; - case CLOCK_EVT_MODE_ONESHOT: - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - ctrl_reg = __raw_readl(timer->base_addr + - XTTCPS_CNT_CNTRL_OFFSET); - ctrl_reg |= XTTCPS_CNT_CNTRL_DISABLE_MASK; - __raw_writel(ctrl_reg, - timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET); - break; - case CLOCK_EVT_MODE_RESUME: - ctrl_reg = __raw_readl(timer->base_addr + - XTTCPS_CNT_CNTRL_OFFSET); - ctrl_reg &= ~XTTCPS_CNT_CNTRL_DISABLE_MASK; - __raw_writel(ctrl_reg, - timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET); - break; - } -} - -static void __init zynq_ttc_setup_clocksource(struct device_node *np, - void __iomem *base) -{ - struct xttcps_timer_clocksource *ttccs; - struct clk *clk; - int err; - u32 reg; - - ttccs = kzalloc(sizeof(*ttccs), GFP_KERNEL); - if (WARN_ON(!ttccs)) - return; - - err = of_property_read_u32(np, "reg", ®); - if (WARN_ON(err)) - return; - - clk = of_clk_get_by_name(np, "cpu_1x"); - if (WARN_ON(IS_ERR(clk))) - return; - - err = clk_prepare_enable(clk); - if (WARN_ON(err)) - return; - - ttccs->xttc.base_addr = base + reg * 4; - - ttccs->cs.name = np->name; - ttccs->cs.rating = 200; - ttccs->cs.read = __xttc_clocksource_read; - ttccs->cs.mask = CLOCKSOURCE_MASK(16); - ttccs->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS; - - __raw_writel(0x0, ttccs->xttc.base_addr + XTTCPS_IER_OFFSET); - __raw_writel(CLK_CNTRL_PRESCALE | CLK_CNTRL_PRESCALE_EN, - ttccs->xttc.base_addr + XTTCPS_CLK_CNTRL_OFFSET); - __raw_writel(CNT_CNTRL_RESET, - ttccs->xttc.base_addr + XTTCPS_CNT_CNTRL_OFFSET); - - err = clocksource_register_hz(&ttccs->cs, clk_get_rate(clk) / PRESCALE); - if (WARN_ON(err)) - return; -} - -static void __init zynq_ttc_setup_clockevent(struct device_node *np, - void __iomem *base) -{ - struct xttcps_timer_clockevent *ttcce; - int err, irq; - u32 reg; - - ttcce = kzalloc(sizeof(*ttcce), GFP_KERNEL); - if (WARN_ON(!ttcce)) - return; - - err = of_property_read_u32(np, "reg", ®); - if (WARN_ON(err)) - return; - - ttcce->xttc.base_addr = base + reg * 4; - - ttcce->clk = of_clk_get_by_name(np, "cpu_1x"); - if (WARN_ON(IS_ERR(ttcce->clk))) - return; - - err = clk_prepare_enable(ttcce->clk); - if (WARN_ON(err)) - return; - - irq = irq_of_parse_and_map(np, 0); - if (WARN_ON(!irq)) - return; - - ttcce->ce.name = np->name; - ttcce->ce.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT; - ttcce->ce.set_next_event = xttcps_set_next_event; - ttcce->ce.set_mode = xttcps_set_mode; - ttcce->ce.rating = 200; - ttcce->ce.irq = irq; - ttcce->ce.cpumask = cpu_possible_mask; - - __raw_writel(0x23, ttcce->xttc.base_addr + XTTCPS_CNT_CNTRL_OFFSET); - __raw_writel(CLK_CNTRL_PRESCALE | CLK_CNTRL_PRESCALE_EN, - ttcce->xttc.base_addr + XTTCPS_CLK_CNTRL_OFFSET); - __raw_writel(0x1, ttcce->xttc.base_addr + XTTCPS_IER_OFFSET); - - err = request_irq(irq, xttcps_clock_event_interrupt, IRQF_TIMER, - np->name, ttcce); - if (WARN_ON(err)) - return; - - clockevents_config_and_register(&ttcce->ce, - clk_get_rate(ttcce->clk) / PRESCALE, - 1, 0xfffe); -} - -static const __initconst struct of_device_id zynq_ttc_match[] = { - { .compatible = "xlnx,ttc-counter-clocksource", - .data = zynq_ttc_setup_clocksource, }, - { .compatible = "xlnx,ttc-counter-clockevent", - .data = zynq_ttc_setup_clockevent, }, - {} -}; - -/** - * xttcps_timer_init - Initialize the timer - * - * Initializes the timer hardware and register the clock source and clock event - * timers with Linux kernal timer framework - **/ -void __init xttcps_timer_init(void) -{ - struct device_node *np; - - for_each_compatible_node(np, NULL, "xlnx,ttc") { - struct device_node *np_chld; - void __iomem *base; - - base = of_iomap(np, 0); - if (WARN_ON(!base)) - return; - - for_each_available_child_of_node(np, np_chld) { - int (*cb)(struct device_node *np, void __iomem *base); - const struct of_device_id *match; - - match = of_match_node(zynq_ttc_match, np_chld); - if (match) { - cb = match->data; - cb(np_chld, base); - } - } - } -} diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index a0daa2f..e6dbc8d 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -140,8 +140,7 @@ static int omap_dm_timer_prepare(struct omap_dm_timer *timer) */ if (!(timer->capability & OMAP_TIMER_NEEDS_RESET)) { timer->fclk = clk_get(&timer->pdev->dev, "fck"); - if (WARN_ON_ONCE(IS_ERR_OR_NULL(timer->fclk))) { - timer->fclk = NULL; + if (WARN_ON_ONCE(IS_ERR(timer->fclk))) { dev_err(&timer->pdev->dev, ": No fclk handle.\n"); return -EINVAL; } @@ -373,7 +372,7 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_modify_idlect_mask); struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer) { - if (timer) + if (timer && !IS_ERR(timer->fclk)) return timer->fclk; return NULL; } @@ -482,7 +481,7 @@ int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) if (pdata && pdata->set_timer_src) return pdata->set_timer_src(timer->pdev, source); - if (!timer->fclk) + if (IS_ERR(timer->fclk)) return -EINVAL; switch (source) { @@ -500,13 +499,13 @@ int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) } parent = clk_get(&timer->pdev->dev, parent_name); - if (IS_ERR_OR_NULL(parent)) { + if (IS_ERR(parent)) { pr_err("%s: %s not found\n", __func__, parent_name); return -EINVAL; } ret = clk_set_parent(timer->fclk, parent); - if (IS_ERR_VALUE(ret)) + if (ret < 0) pr_err("%s: failed to set %s as parent\n", __func__, parent_name); @@ -808,6 +807,7 @@ static int omap_dm_timer_probe(struct platform_device *pdev) return -ENOMEM; } + timer->fclk = ERR_PTR(-ENODEV); timer->io_base = devm_ioremap_resource(dev, mem); if (IS_ERR(timer->io_base)) return PTR_ERR(timer->io_base); diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h index e126644..989fefe 100644 --- a/arch/arm/plat-samsung/include/plat/cpu.h +++ b/arch/arm/plat-samsung/include/plat/cpu.h @@ -23,6 +23,9 @@ extern unsigned long samsung_cpu_id; #define S3C24XX_CPU_ID 0x32400000 #define S3C24XX_CPU_MASK 0xFFF00000 +#define S3C2412_CPU_ID 0x32412000 +#define S3C2412_CPU_MASK 0xFFFFF000 + #define S3C6400_CPU_ID 0x36400000 #define S3C6410_CPU_ID 0x36410000 #define S3C64XX_CPU_MASK 0xFFFFF000 @@ -53,6 +56,7 @@ static inline int is_samsung_##name(void) \ } IS_SAMSUNG_CPU(s3c24xx, S3C24XX_CPU_ID, S3C24XX_CPU_MASK) +IS_SAMSUNG_CPU(s3c2412, S3C2412_CPU_ID, S3C2412_CPU_MASK) IS_SAMSUNG_CPU(s3c6400, S3C6400_CPU_ID, S3C64XX_CPU_MASK) IS_SAMSUNG_CPU(s3c6410, S3C6410_CPU_ID, S3C64XX_CPU_MASK) IS_SAMSUNG_CPU(s5p6440, S5P6440_CPU_ID, S5P64XX_CPU_MASK) @@ -74,6 +78,12 @@ IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK) # define soc_is_s3c24xx() 0 #endif +#if defined(CONFIG_CPU_S3C2412) +# define soc_is_s3c2412() is_samsung_s3c2412() +#else +# define soc_is_s3c2412() 0 +#endif + #if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410) # define soc_is_s3c64xx() (is_samsung_s3c6400() || is_samsung_s3c6410()) #else @@ -173,7 +183,6 @@ extern void s3c_init_cpu(unsigned long idcode, /* core initialisation functions */ -extern void s3c24xx_init_irq(void); extern void s5p_init_irq(u32 *vic, u32 num_vic); extern void s3c24xx_init_io(struct map_desc *mach_desc, int size); diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c index b323d8d..7c2f668 100644 --- a/arch/avr32/mach-at32ap/at32ap700x.c +++ b/arch/avr32/mach-at32ap/at32ap700x.c @@ -1453,7 +1453,7 @@ static struct resource atmel_lcdfb0_resource[] = { }, }; DEFINE_DEV_DATA(atmel_lcdfb, 0); -DEV_CLK(hck1, atmel_lcdfb0, hsb, 7); +DEV_CLK(hclk, atmel_lcdfb0, hsb, 7); static struct clk atmel_lcdfb0_pixclk = { .name = "lcdc_clk", .dev = &atmel_lcdfb0_device.dev, @@ -1530,6 +1530,8 @@ at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data, memcpy(info, data, sizeof(struct atmel_lcdfb_info)); info->default_monspecs = monspecs; + pdev->name = "at32ap-lcdfb"; + platform_device_register(pdev); return pdev; @@ -2246,7 +2248,7 @@ static __initdata struct clk *init_clocks[] = { &atmel_twi0_pclk, &atmel_mci0_pclk, #if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7002) - &atmel_lcdfb0_hck1, + &atmel_lcdfb0_hclk, &atmel_lcdfb0_pixclk, #endif &ssc0_pclk, diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index a47e6ee..a64caef 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -63,6 +63,14 @@ config CLK_TWL6040 McPDM. McPDM module is using the external bit clock on the McPDM bus as functional clock. +config COMMON_CLK_AXI_CLKGEN + tristate "AXI clkgen driver" + depends on ARCH_ZYNQ || MICROBLAZE + help + ---help--- + Support for the Analog Devices axi-clkgen pcore clock generator for Xilinx + FPGAs. It is commonly used in Analog Devices' reference designs. + endmenu source "drivers/clk/mvebu/Kconfig" diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 0147022..17e8dc4 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -7,6 +7,7 @@ obj-$(CONFIG_COMMON_CLK) += clk-fixed-factor.o obj-$(CONFIG_COMMON_CLK) += clk-fixed-rate.o obj-$(CONFIG_COMMON_CLK) += clk-gate.o obj-$(CONFIG_COMMON_CLK) += clk-mux.o +obj-$(CONFIG_COMMON_CLK) += clk-composite.o # SoCs specific obj-$(CONFIG_ARCH_BCM2835) += clk-bcm2835.o @@ -23,6 +24,7 @@ ifeq ($(CONFIG_COMMON_CLK), y) obj-$(CONFIG_ARCH_MMP) += mmp/ endif obj-$(CONFIG_MACH_LOONGSON1) += clk-ls1x.o +obj-$(CONFIG_ARCH_SUNXI) += sunxi/ obj-$(CONFIG_ARCH_U8500) += ux500/ obj-$(CONFIG_ARCH_VT8500) += clk-vt8500.o obj-$(CONFIG_ARCH_ZYNQ) += clk-zynq.o @@ -32,6 +34,7 @@ obj-$(CONFIG_PLAT_SAMSUNG) += samsung/ obj-$(CONFIG_X86) += x86/ # Chip specific +obj-$(CONFIG_COMMON_CLK_AXI_CLKGEN) += clk-axi-clkgen.o obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o obj-$(CONFIG_COMMON_CLK_MAX77686) += clk-max77686.o obj-$(CONFIG_CLK_TWL6040) += clk-twl6040.o diff --git a/drivers/clk/clk-axi-clkgen.c b/drivers/clk/clk-axi-clkgen.c new file mode 100644 index 0000000..8137327 --- /dev/null +++ b/drivers/clk/clk-axi-clkgen.c @@ -0,0 +1,331 @@ +/* + * AXI clkgen driver + * + * Copyright 2012-2013 Analog Devices Inc. + * Author: Lars-Peter Clausen <lars@metafoo.de> + * + * Licensed under the GPL-2. + * + */ + +#include <linux/platform_device.h> +#include <linux/clk-provider.h> +#include <linux/clk.h> +#include <linux/slab.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/module.h> +#include <linux/err.h> + +#define AXI_CLKGEN_REG_UPDATE_ENABLE 0x04 +#define AXI_CLKGEN_REG_CLK_OUT1 0x08 +#define AXI_CLKGEN_REG_CLK_OUT2 0x0c +#define AXI_CLKGEN_REG_CLK_DIV 0x10 +#define AXI_CLKGEN_REG_CLK_FB1 0x14 +#define AXI_CLKGEN_REG_CLK_FB2 0x18 +#define AXI_CLKGEN_REG_LOCK1 0x1c +#define AXI_CLKGEN_REG_LOCK2 0x20 +#define AXI_CLKGEN_REG_LOCK3 0x24 +#define AXI_CLKGEN_REG_FILTER1 0x28 +#define AXI_CLKGEN_REG_FILTER2 0x2c + +struct axi_clkgen { + void __iomem *base; + struct clk_hw clk_hw; +}; + +static uint32_t axi_clkgen_lookup_filter(unsigned int m) +{ + switch (m) { + case 0: + return 0x01001990; + case 1: + return 0x01001190; + case 2: + return 0x01009890; + case 3: + return 0x01001890; + case 4: + return 0x01008890; + case 5 ... 8: + return 0x01009090; + case 9 ... 11: + return 0x01000890; + case 12: + return 0x08009090; + case 13 ... 22: + return 0x01001090; + case 23 ... 36: + return 0x01008090; + case 37 ... 46: + return 0x08001090; + default: + return 0x08008090; + } +} + +static const uint32_t axi_clkgen_lock_table[] = { + 0x060603e8, 0x060603e8, 0x080803e8, 0x0b0b03e8, + 0x0e0e03e8, 0x111103e8, 0x131303e8, 0x161603e8, + 0x191903e8, 0x1c1c03e8, 0x1f1f0384, 0x1f1f0339, + 0x1f1f02ee, 0x1f1f02bc, 0x1f1f028a, 0x1f1f0271, + 0x1f1f023f, 0x1f1f0226, 0x1f1f020d, 0x1f1f01f4, + 0x1f1f01db, 0x1f1f01c2, 0x1f1f01a9, 0x1f1f0190, + 0x1f1f0190, 0x1f1f0177, 0x1f1f015e, 0x1f1f015e, + 0x1f1f0145, 0x1f1f0145, 0x1f1f012c, 0x1f1f012c, + 0x1f1f012c, 0x1f1f0113, 0x1f1f0113, 0x1f1f0113, +}; + +static uint32_t axi_clkgen_lookup_lock(unsigned int m) +{ + if (m < ARRAY_SIZE(axi_clkgen_lock_table)) + return axi_clkgen_lock_table[m]; + return 0x1f1f00fa; +} + +static const unsigned int fpfd_min = 10000; +static const unsigned int fpfd_max = 300000; +static const unsigned int fvco_min = 600000; +static const unsigned int fvco_max = 1200000; + +static void axi_clkgen_calc_params(unsigned long fin, unsigned long fout, + unsigned int *best_d, unsigned int *best_m, unsigned int *best_dout) +{ + unsigned long d, d_min, d_max, _d_min, _d_max; + unsigned long m, m_min, m_max; + unsigned long f, dout, best_f, fvco; + + fin /= 1000; + fout /= 1000; + + best_f = ULONG_MAX; + *best_d = 0; + *best_m = 0; + *best_dout = 0; + + d_min = max_t(unsigned long, DIV_ROUND_UP(fin, fpfd_max), 1); + d_max = min_t(unsigned long, fin / fpfd_min, 80); + + m_min = max_t(unsigned long, DIV_ROUND_UP(fvco_min, fin) * d_min, 1); + m_max = min_t(unsigned long, fvco_max * d_max / fin, 64); + + for (m = m_min; m <= m_max; m++) { + _d_min = max(d_min, DIV_ROUND_UP(fin * m, fvco_max)); + _d_max = min(d_max, fin * m / fvco_min); + + for (d = _d_min; d <= _d_max; d++) { + fvco = fin * m / d; + + dout = DIV_ROUND_CLOSEST(fvco, fout); + dout = clamp_t(unsigned long, dout, 1, 128); + f = fvco / dout; + if (abs(f - fout) < abs(best_f - fout)) { + best_f = f; + *best_d = d; + *best_m = m; + *best_dout = dout; + if (best_f == fout) + return; + } + } + } +} + +static void axi_clkgen_calc_clk_params(unsigned int divider, unsigned int *low, + unsigned int *high, unsigned int *edge, unsigned int *nocount) +{ + if (divider == 1) + *nocount = 1; + else + *nocount = 0; + + *high = divider / 2; + *edge = divider % 2; + *low = divider - *high; +} + +static void axi_clkgen_write(struct axi_clkgen *axi_clkgen, + unsigned int reg, unsigned int val) +{ + writel(val, axi_clkgen->base + reg); +} + +static void axi_clkgen_read(struct axi_clkgen *axi_clkgen, + unsigned int reg, unsigned int *val) +{ + *val = readl(axi_clkgen->base + reg); +} + +static struct axi_clkgen *clk_hw_to_axi_clkgen(struct clk_hw *clk_hw) +{ + return container_of(clk_hw, struct axi_clkgen, clk_hw); +} + +static int axi_clkgen_set_rate(struct clk_hw *clk_hw, + unsigned long rate, unsigned long parent_rate) +{ + struct axi_clkgen *axi_clkgen = clk_hw_to_axi_clkgen(clk_hw); + unsigned int d, m, dout; + unsigned int nocount; + unsigned int high; + unsigned int edge; + unsigned int low; + uint32_t filter; + uint32_t lock; + + if (parent_rate == 0 || rate == 0) + return -EINVAL; + + axi_clkgen_calc_params(parent_rate, rate, &d, &m, &dout); + + if (d == 0 || dout == 0 || m == 0) + return -EINVAL; + + filter = axi_clkgen_lookup_filter(m - 1); + lock = axi_clkgen_lookup_lock(m - 1); + + axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_UPDATE_ENABLE, 0); + + axi_clkgen_calc_clk_params(dout, &low, &high, &edge, &nocount); + axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_CLK_OUT1, + (high << 6) | low); + axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_CLK_OUT2, + (edge << 7) | (nocount << 6)); + + axi_clkgen_calc_clk_params(d, &low, &high, &edge, &nocount); + axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_CLK_DIV, + (edge << 13) | (nocount << 12) | (high << 6) | low); + + axi_clkgen_calc_clk_params(m, &low, &high, &edge, &nocount); + axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_CLK_FB1, + (high << 6) | low); + axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_CLK_FB2, + (edge << 7) | (nocount << 6)); + + axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_LOCK1, lock & 0x3ff); + axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_LOCK2, + (((lock >> 16) & 0x1f) << 10) | 0x1); + axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_LOCK3, + (((lock >> 24) & 0x1f) << 10) | 0x3e9); + axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_FILTER1, filter >> 16); + axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_FILTER2, filter); + + axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_UPDATE_ENABLE, 1); + + return 0; +} + +static long axi_clkgen_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + unsigned int d, m, dout; + + axi_clkgen_calc_params(*parent_rate, rate, &d, &m, &dout); + + if (d == 0 || dout == 0 || m == 0) + return -EINVAL; + + return *parent_rate / d * m / dout; +} + +static unsigned long axi_clkgen_recalc_rate(struct clk_hw *clk_hw, + unsigned long parent_rate) +{ + struct axi_clkgen *axi_clkgen = clk_hw_to_axi_clkgen(clk_hw); + unsigned int d, m, dout; + unsigned int reg; + unsigned long long tmp; + + axi_clkgen_read(axi_clkgen, AXI_CLKGEN_REG_CLK_OUT1, ®); + dout = (reg & 0x3f) + ((reg >> 6) & 0x3f); + axi_clkgen_read(axi_clkgen, AXI_CLKGEN_REG_CLK_DIV, ®); + d = (reg & 0x3f) + ((reg >> 6) & 0x3f); + axi_clkgen_read(axi_clkgen, AXI_CLKGEN_REG_CLK_FB1, ®); + m = (reg & 0x3f) + ((reg >> 6) & 0x3f); + + if (d == 0 || dout == 0) + return 0; + + tmp = (unsigned long long)(parent_rate / d) * m; + do_div(tmp, dout); + + if (tmp > ULONG_MAX) + return ULONG_MAX; + + return tmp; +} + +static const struct clk_ops axi_clkgen_ops = { + .recalc_rate = axi_clkgen_recalc_rate, + .round_rate = axi_clkgen_round_rate, + .set_rate = axi_clkgen_set_rate, +}; + +static int axi_clkgen_probe(struct platform_device *pdev) +{ + struct axi_clkgen *axi_clkgen; + struct clk_init_data init; + const char *parent_name; + const char *clk_name; + struct resource *mem; + struct clk *clk; + + axi_clkgen = devm_kzalloc(&pdev->dev, sizeof(*axi_clkgen), GFP_KERNEL); + if (!axi_clkgen) + return -ENOMEM; + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + axi_clkgen->base = devm_ioremap_resource(&pdev->dev, mem); + if (IS_ERR(axi_clkgen->base)) + return PTR_ERR(axi_clkgen->base); + + parent_name = of_clk_get_parent_name(pdev->dev.of_node, 0); + if (!parent_name) + return -EINVAL; + + clk_name = pdev->dev.of_node->name; + of_property_read_string(pdev->dev.of_node, "clock-output-names", + &clk_name); + + init.name = clk_name; + init.ops = &axi_clkgen_ops; + init.flags = 0; + init.parent_names = &parent_name; + init.num_parents = 1; + + axi_clkgen->clk_hw.init = &init; + clk = devm_clk_register(&pdev->dev, &axi_clkgen->clk_hw); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + return of_clk_add_provider(pdev->dev.of_node, of_clk_src_simple_get, + clk); +} + +static int axi_clkgen_remove(struct platform_device *pdev) +{ + of_clk_del_provider(pdev->dev.of_node); + + return 0; +} + +static const struct of_device_id axi_clkgen_ids[] = { + { .compatible = "adi,axi-clkgen-1.00.a" }, + { }, +}; +MODULE_DEVICE_TABLE(of, axi_clkgen_ids); + +static struct platform_driver axi_clkgen_driver = { + .driver = { + .name = "adi-axi-clkgen", + .owner = THIS_MODULE, + .of_match_table = axi_clkgen_ids, + }, + .probe = axi_clkgen_probe, + .remove = axi_clkgen_remove, +}; +module_platform_driver(axi_clkgen_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>"); +MODULE_DESCRIPTION("Driver for the Analog Devices' AXI clkgen pcore clock generator"); diff --git a/drivers/clk/clk-composite.c b/drivers/clk/clk-composite.c new file mode 100644 index 0000000..097dee4 --- /dev/null +++ b/drivers/clk/clk-composite.c @@ -0,0 +1,201 @@ +/* + * Copyright (c) 2013 NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/err.h> +#include <linux/slab.h> + +#define to_clk_composite(_hw) container_of(_hw, struct clk_composite, hw) + +static u8 clk_composite_get_parent(struct clk_hw *hw) +{ + struct clk_composite *composite = to_clk_composite(hw); + const struct clk_ops *mux_ops = composite->mux_ops; + struct clk_hw *mux_hw = composite->mux_hw; + + mux_hw->clk = hw->clk; + + return mux_ops->get_parent(mux_hw); +} + +static int clk_composite_set_parent(struct clk_hw *hw, u8 index) +{ + struct clk_composite *composite = to_clk_composite(hw); + const struct clk_ops *mux_ops = composite->mux_ops; + struct clk_hw *mux_hw = composite->mux_hw; + + mux_hw->clk = hw->clk; + + return mux_ops->set_parent(mux_hw, index); +} + +static unsigned long clk_composite_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct clk_composite *composite = to_clk_composite(hw); + const struct clk_ops *div_ops = composite->div_ops; + struct clk_hw *div_hw = composite->div_hw; + + div_hw->clk = hw->clk; + + return div_ops->recalc_rate(div_hw, parent_rate); +} + +static long clk_composite_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *prate) +{ + struct clk_composite *composite = to_clk_composite(hw); + const struct clk_ops *div_ops = composite->div_ops; + struct clk_hw *div_hw = composite->div_hw; + + div_hw->clk = hw->clk; + + return div_ops->round_rate(div_hw, rate, prate); +} + +static int clk_composite_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct clk_composite *composite = to_clk_composite(hw); + const struct clk_ops *div_ops = composite->div_ops; + struct clk_hw *div_hw = composite->div_hw; + + div_hw->clk = hw->clk; + + return div_ops->set_rate(div_hw, rate, parent_rate); +} + +static int clk_composite_is_enabled(struct clk_hw *hw) +{ + struct clk_composite *composite = to_clk_composite(hw); + const struct clk_ops *gate_ops = composite->gate_ops; + struct clk_hw *gate_hw = composite->gate_hw; + + gate_hw->clk = hw->clk; + + return gate_ops->is_enabled(gate_hw); +} + +static int clk_composite_enable(struct clk_hw *hw) +{ + struct clk_composite *composite = to_clk_composite(hw); + const struct clk_ops *gate_ops = composite->gate_ops; + struct clk_hw *gate_hw = composite->gate_hw; + + gate_hw->clk = hw->clk; + + return gate_ops->enable(gate_hw); +} + +static void clk_composite_disable(struct clk_hw *hw) +{ + struct clk_composite *composite = to_clk_composite(hw); + const struct clk_ops *gate_ops = composite->gate_ops; + struct clk_hw *gate_hw = composite->gate_hw; + + gate_hw->clk = hw->clk; + + gate_ops->disable(gate_hw); +} + +struct clk *clk_register_composite(struct device *dev, const char *name, + const char **parent_names, int num_parents, + struct clk_hw *mux_hw, const struct clk_ops *mux_ops, + struct clk_hw *div_hw, const struct clk_ops *div_ops, + struct clk_hw *gate_hw, const struct clk_ops *gate_ops, + unsigned long flags) +{ + struct clk *clk; + struct clk_init_data init; + struct clk_composite *composite; + struct clk_ops *clk_composite_ops; + + composite = kzalloc(sizeof(*composite), GFP_KERNEL); + if (!composite) { + pr_err("%s: could not allocate composite clk\n", __func__); + return ERR_PTR(-ENOMEM); + } + + init.name = name; + init.flags = flags | CLK_IS_BASIC; + init.parent_names = parent_names; + init.num_parents = num_parents; + + clk_composite_ops = &composite->ops; + + if (mux_hw && mux_ops) { + if (!mux_ops->get_parent || !mux_ops->set_parent) { + clk = ERR_PTR(-EINVAL); + goto err; + } + + composite->mux_hw = mux_hw; + composite->mux_ops = mux_ops; + clk_composite_ops->get_parent = clk_composite_get_parent; + clk_composite_ops->set_parent = clk_composite_set_parent; + } + + if (div_hw && div_ops) { + if (!div_ops->recalc_rate || !div_ops->round_rate || + !div_ops->set_rate) { + clk = ERR_PTR(-EINVAL); + goto err; + } + + composite->div_hw = div_hw; + composite->div_ops = div_ops; + clk_composite_ops->recalc_rate = clk_composite_recalc_rate; + clk_composite_ops->round_rate = clk_composite_round_rate; + clk_composite_ops->set_rate = clk_composite_set_rate; + } + + if (gate_hw && gate_ops) { + if (!gate_ops->is_enabled || !gate_ops->enable || + !gate_ops->disable) { + clk = ERR_PTR(-EINVAL); + goto err; + } + + composite->gate_hw = gate_hw; + composite->gate_ops = gate_ops; + clk_composite_ops->is_enabled = clk_composite_is_enabled; + clk_composite_ops->enable = clk_composite_enable; + clk_composite_ops->disable = clk_composite_disable; + } + + init.ops = clk_composite_ops; + composite->hw.init = &init; + + clk = clk_register(dev, &composite->hw); + if (IS_ERR(clk)) + goto err; + + if (composite->mux_hw) + composite->mux_hw->clk = clk; + + if (composite->div_hw) + composite->div_hw->clk = clk; + + if (composite->gate_hw) + composite->gate_hw->clk = clk; + + return clk; + +err: + kfree(composite); + return clk; +} diff --git a/drivers/clk/clk-mux.c b/drivers/clk/clk-mux.c index 508c032..25b1734 100644 --- a/drivers/clk/clk-mux.c +++ b/drivers/clk/clk-mux.c @@ -32,6 +32,7 @@ static u8 clk_mux_get_parent(struct clk_hw *hw) { struct clk_mux *mux = to_clk_mux(hw); + int num_parents = __clk_get_num_parents(hw->clk); u32 val; /* @@ -42,7 +43,16 @@ static u8 clk_mux_get_parent(struct clk_hw *hw) * val = 0x4 really means "bit 2, index starts at bit 0" */ val = readl(mux->reg) >> mux->shift; - val &= (1 << mux->width) - 1; + val &= mux->mask; + + if (mux->table) { + int i; + + for (i = 0; i < num_parents; i++) + if (mux->table[i] == val) + return i; + return -EINVAL; + } if (val && (mux->flags & CLK_MUX_INDEX_BIT)) val = ffs(val) - 1; @@ -50,7 +60,7 @@ static u8 clk_mux_get_parent(struct clk_hw *hw) if (val && (mux->flags & CLK_MUX_INDEX_ONE)) val--; - if (val >= __clk_get_num_parents(hw->clk)) + if (val >= num_parents) return -EINVAL; return val; @@ -62,17 +72,22 @@ static int clk_mux_set_parent(struct clk_hw *hw, u8 index) u32 val; unsigned long flags = 0; - if (mux->flags & CLK_MUX_INDEX_BIT) - index = (1 << ffs(index)); + if (mux->table) + index = mux->table[index]; - if (mux->flags & CLK_MUX_INDEX_ONE) - index++; + else { + if (mux->flags & CLK_MUX_INDEX_BIT) + index = (1 << ffs(index)); + + if (mux->flags & CLK_MUX_INDEX_ONE) + index++; + } if (mux->lock) spin_lock_irqsave(mux->lock, flags); val = readl(mux->reg); - val &= ~(((1 << mux->width) - 1) << mux->shift); + val &= ~(mux->mask << mux->shift); val |= index << mux->shift; writel(val, mux->reg); @@ -88,10 +103,10 @@ const struct clk_ops clk_mux_ops = { }; EXPORT_SYMBOL_GPL(clk_mux_ops); -struct clk *clk_register_mux(struct device *dev, const char *name, +struct clk *clk_register_mux_table(struct device *dev, const char *name, const char **parent_names, u8 num_parents, unsigned long flags, - void __iomem *reg, u8 shift, u8 width, - u8 clk_mux_flags, spinlock_t *lock) + void __iomem *reg, u8 shift, u32 mask, + u8 clk_mux_flags, u32 *table, spinlock_t *lock) { struct clk_mux *mux; struct clk *clk; @@ -113,9 +128,10 @@ struct clk *clk_register_mux(struct device *dev, const char *name, /* struct clk_mux assignments */ mux->reg = reg; mux->shift = shift; - mux->width = width; + mux->mask = mask; mux->flags = clk_mux_flags; mux->lock = lock; + mux->table = table; mux->hw.init = &init; clk = clk_register(dev, &mux->hw); @@ -125,3 +141,15 @@ struct clk *clk_register_mux(struct device *dev, const char *name, return clk; } + +struct clk *clk_register_mux(struct device *dev, const char *name, + const char **parent_names, u8 num_parents, unsigned long flags, + void __iomem *reg, u8 shift, u8 width, + u8 clk_mux_flags, spinlock_t *lock) +{ + u32 mask = BIT(width) - 1; + + return clk_register_mux_table(dev, name, parent_names, num_parents, + flags, reg, shift, mask, clk_mux_flags, + NULL, lock); +} diff --git a/drivers/clk/clk-prima2.c b/drivers/clk/clk-prima2.c index f8e9d0c..643ca65 100644 --- a/drivers/clk/clk-prima2.c +++ b/drivers/clk/clk-prima2.c @@ -1113,7 +1113,7 @@ void __init sirfsoc_of_clk_init(void) for (i = pll1; i < maxclk; i++) { prima2_clks[i] = clk_register(NULL, prima2_clk_hw_array[i]); - BUG_ON(!prima2_clks[i]); + BUG_ON(IS_ERR(prima2_clks[i])); } clk_register_clkdev(prima2_clks[cpu], NULL, "cpu"); clk_register_clkdev(prima2_clks[io], NULL, "io"); diff --git a/drivers/clk/clk-zynq.c b/drivers/clk/clk-zynq.c index b14a25f..3206297 100644 --- a/drivers/clk/clk-zynq.c +++ b/drivers/clk/clk-zynq.c @@ -20,6 +20,7 @@ #include <linux/slab.h> #include <linux/kernel.h> #include <linux/clk-provider.h> +#include <linux/clk/zynq.h> static void __iomem *slcr_base; diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index ed87b24..0230c9d 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -19,14 +19,77 @@ #include <linux/of.h> #include <linux/device.h> #include <linux/init.h> +#include <linux/sched.h> static DEFINE_SPINLOCK(enable_lock); static DEFINE_MUTEX(prepare_lock); +static struct task_struct *prepare_owner; +static struct task_struct *enable_owner; + +static int prepare_refcnt; +static int enable_refcnt; + static HLIST_HEAD(clk_root_list); static HLIST_HEAD(clk_orphan_list); static LIST_HEAD(clk_notifier_list); +/*** locking ***/ +static void clk_prepare_lock(void) +{ + if (!mutex_trylock(&prepare_lock)) { + if (prepare_owner == current) { + prepare_refcnt++; + return; + } + mutex_lock(&prepare_lock); + } + WARN_ON_ONCE(prepare_owner != NULL); + WARN_ON_ONCE(prepare_refcnt != 0); + prepare_owner = current; + prepare_refcnt = 1; +} + +static void clk_prepare_unlock(void) +{ + WARN_ON_ONCE(prepare_owner != current); + WARN_ON_ONCE(prepare_refcnt == 0); + + if (--prepare_refcnt) + return; + prepare_owner = NULL; + mutex_unlock(&prepare_lock); +} + +static unsigned long clk_enable_lock(void) +{ + unsigned long flags; + + if (!spin_trylock_irqsave(&enable_lock, flags)) { + if (enable_owner == current) { + enable_refcnt++; + return flags; + } + spin_lock_irqsave(&enable_lock, flags); + } + WARN_ON_ONCE(enable_owner != NULL); + WARN_ON_ONCE(enable_refcnt != 0); + enable_owner = current; + enable_refcnt = 1; + return flags; +} + +static void clk_enable_unlock(unsigned long flags) +{ + WARN_ON_ONCE(enable_owner != current); + WARN_ON_ONCE(enable_refcnt == 0); + + if (--enable_refcnt) + return; + enable_owner = NULL; + spin_unlock_irqrestore(&enable_lock, flags); +} + /*** debugfs support ***/ #ifdef CONFIG_COMMON_CLK_DEBUG @@ -69,7 +132,7 @@ static int clk_summary_show(struct seq_file *s, void *data) seq_printf(s, " clock enable_cnt prepare_cnt rate\n"); seq_printf(s, "---------------------------------------------------------------------\n"); - mutex_lock(&prepare_lock); + clk_prepare_lock(); hlist_for_each_entry(c, &clk_root_list, child_node) clk_summary_show_subtree(s, c, 0); @@ -77,7 +140,7 @@ static int clk_summary_show(struct seq_file *s, void *data) hlist_for_each_entry(c, &clk_orphan_list, child_node) clk_summary_show_subtree(s, c, 0); - mutex_unlock(&prepare_lock); + clk_prepare_unlock(); return 0; } @@ -130,7 +193,7 @@ static int clk_dump(struct seq_file *s, void *data) seq_printf(s, "{"); - mutex_lock(&prepare_lock); + clk_prepare_lock(); hlist_for_each_entry(c, &clk_root_list, child_node) { if (!first_node) @@ -144,7 +207,7 @@ static int clk_dump(struct seq_file *s, void *data) clk_dump_subtree(s, c, 0); } - mutex_unlock(&prepare_lock); + clk_prepare_unlock(); seq_printf(s, "}"); return 0; @@ -316,7 +379,7 @@ static int __init clk_debug_init(void) if (!orphandir) return -ENOMEM; - mutex_lock(&prepare_lock); + clk_prepare_lock(); hlist_for_each_entry(clk, &clk_root_list, child_node) clk_debug_create_subtree(clk, rootdir); @@ -326,7 +389,7 @@ static int __init clk_debug_init(void) inited = 1; - mutex_unlock(&prepare_lock); + clk_prepare_unlock(); return 0; } @@ -336,6 +399,31 @@ static inline int clk_debug_register(struct clk *clk) { return 0; } #endif /* caller must hold prepare_lock */ +static void clk_unprepare_unused_subtree(struct clk *clk) +{ + struct clk *child; + + if (!clk) + return; + + hlist_for_each_entry(child, &clk->children, child_node) + clk_unprepare_unused_subtree(child); + + if (clk->prepare_count) + return; + + if (clk->flags & CLK_IGNORE_UNUSED) + return; + + if (__clk_is_prepared(clk)) { + if (clk->ops->unprepare_unused) + clk->ops->unprepare_unused(clk->hw); + else if (clk->ops->unprepare) + clk->ops->unprepare(clk->hw); + } +} + +/* caller must hold prepare_lock */ static void clk_disable_unused_subtree(struct clk *clk) { struct clk *child; @@ -347,7 +435,7 @@ static void clk_disable_unused_subtree(struct clk *clk) hlist_for_each_entry(child, &clk->children, child_node) clk_disable_unused_subtree(child); - spin_lock_irqsave(&enable_lock, flags); + flags = clk_enable_lock(); if (clk->enable_count) goto unlock_out; @@ -368,7 +456,7 @@ static void clk_disable_unused_subtree(struct clk *clk) } unlock_out: - spin_unlock_irqrestore(&enable_lock, flags); + clk_enable_unlock(flags); out: return; @@ -378,7 +466,7 @@ static int clk_disable_unused(void) { struct clk *clk; - mutex_lock(&prepare_lock); + clk_prepare_lock(); hlist_for_each_entry(clk, &clk_root_list, child_node) clk_disable_unused_subtree(clk); @@ -386,7 +474,13 @@ static int clk_disable_unused(void) hlist_for_each_entry(clk, &clk_orphan_list, child_node) clk_disable_unused_subtree(clk); - mutex_unlock(&prepare_lock); + hlist_for_each_entry(clk, &clk_root_list, child_node) + clk_unprepare_unused_subtree(clk); + + hlist_for_each_entry(clk, &clk_orphan_list, child_node) + clk_unprepare_unused_subtree(clk); + + clk_prepare_unlock(); return 0; } @@ -451,6 +545,27 @@ unsigned long __clk_get_flags(struct clk *clk) return !clk ? 0 : clk->flags; } +bool __clk_is_prepared(struct clk *clk) +{ + int ret; + + if (!clk) + return false; + + /* + * .is_prepared is optional for clocks that can prepare + * fall back to software usage counter if it is missing + */ + if (!clk->ops->is_prepared) { + ret = clk->prepare_count ? 1 : 0; + goto out; + } + + ret = clk->ops->is_prepared(clk->hw); +out: + return !!ret; +} + bool __clk_is_enabled(struct clk *clk) { int ret; @@ -548,9 +663,9 @@ void __clk_unprepare(struct clk *clk) */ void clk_unprepare(struct clk *clk) { - mutex_lock(&prepare_lock); + clk_prepare_lock(); __clk_unprepare(clk); - mutex_unlock(&prepare_lock); + clk_prepare_unlock(); } EXPORT_SYMBOL_GPL(clk_unprepare); @@ -596,9 +711,9 @@ int clk_prepare(struct clk *clk) { int ret; - mutex_lock(&prepare_lock); + clk_prepare_lock(); ret = __clk_prepare(clk); - mutex_unlock(&prepare_lock); + clk_prepare_unlock(); return ret; } @@ -640,9 +755,9 @@ void clk_disable(struct clk *clk) { unsigned long flags; - spin_lock_irqsave(&enable_lock, flags); + flags = clk_enable_lock(); __clk_disable(clk); - spin_unlock_irqrestore(&enable_lock, flags); + clk_enable_unlock(flags); } EXPORT_SYMBOL_GPL(clk_disable); @@ -693,9 +808,9 @@ int clk_enable(struct clk *clk) unsigned long flags; int ret; - spin_lock_irqsave(&enable_lock, flags); + flags = clk_enable_lock(); ret = __clk_enable(clk); - spin_unlock_irqrestore(&enable_lock, flags); + clk_enable_unlock(flags); return ret; } @@ -740,9 +855,9 @@ long clk_round_rate(struct clk *clk, unsigned long rate) { unsigned long ret; - mutex_lock(&prepare_lock); + clk_prepare_lock(); ret = __clk_round_rate(clk, rate); - mutex_unlock(&prepare_lock); + clk_prepare_unlock(); return ret; } @@ -837,13 +952,13 @@ unsigned long clk_get_rate(struct clk *clk) { unsigned long rate; - mutex_lock(&prepare_lock); + clk_prepare_lock(); if (clk && (clk->flags & CLK_GET_RATE_NOCACHE)) __clk_recalc_rates(clk, 0); rate = __clk_get_rate(clk); - mutex_unlock(&prepare_lock); + clk_prepare_unlock(); return rate; } @@ -974,7 +1089,7 @@ static struct clk *clk_propagate_rate_change(struct clk *clk, unsigned long even int ret = NOTIFY_DONE; if (clk->rate == clk->new_rate) - return 0; + return NULL; if (clk->notifier_count) { ret = __clk_notify(clk, event, clk->rate, clk->new_rate); @@ -1048,7 +1163,7 @@ int clk_set_rate(struct clk *clk, unsigned long rate) int ret = 0; /* prevent racing with updates to the clock topology */ - mutex_lock(&prepare_lock); + clk_prepare_lock(); /* bail early if nothing to do */ if (rate == clk->rate) @@ -1080,7 +1195,7 @@ int clk_set_rate(struct clk *clk, unsigned long rate) clk_change_rate(top); out: - mutex_unlock(&prepare_lock); + clk_prepare_unlock(); return ret; } @@ -1096,9 +1211,9 @@ struct clk *clk_get_parent(struct clk *clk) { struct clk *parent; - mutex_lock(&prepare_lock); + clk_prepare_lock(); parent = __clk_get_parent(clk); - mutex_unlock(&prepare_lock); + clk_prepare_unlock(); return parent; } @@ -1242,19 +1357,19 @@ static int __clk_set_parent(struct clk *clk, struct clk *parent) __clk_prepare(parent); /* FIXME replace with clk_is_enabled(clk) someday */ - spin_lock_irqsave(&enable_lock, flags); + flags = clk_enable_lock(); if (clk->enable_count) __clk_enable(parent); - spin_unlock_irqrestore(&enable_lock, flags); + clk_enable_unlock(flags); /* change clock input source */ ret = clk->ops->set_parent(clk->hw, i); /* clean up old prepare and enable */ - spin_lock_irqsave(&enable_lock, flags); + flags = clk_enable_lock(); if (clk->enable_count) __clk_disable(old_parent); - spin_unlock_irqrestore(&enable_lock, flags); + clk_enable_unlock(flags); if (clk->prepare_count) __clk_unprepare(old_parent); @@ -1286,7 +1401,7 @@ int clk_set_parent(struct clk *clk, struct clk *parent) return -ENOSYS; /* prevent racing with updates to the clock topology */ - mutex_lock(&prepare_lock); + clk_prepare_lock(); if (clk->parent == parent) goto out; @@ -1315,7 +1430,7 @@ int clk_set_parent(struct clk *clk, struct clk *parent) __clk_reparent(clk, parent); out: - mutex_unlock(&prepare_lock); + clk_prepare_unlock(); return ret; } @@ -1338,7 +1453,7 @@ int __clk_init(struct device *dev, struct clk *clk) if (!clk) return -EINVAL; - mutex_lock(&prepare_lock); + clk_prepare_lock(); /* check to see if a clock with this name is already registered */ if (__clk_lookup(clk->name)) { @@ -1462,7 +1577,7 @@ int __clk_init(struct device *dev, struct clk *clk) clk_debug_register(clk); out: - mutex_unlock(&prepare_lock); + clk_prepare_unlock(); return ret; } @@ -1696,7 +1811,7 @@ int clk_notifier_register(struct clk *clk, struct notifier_block *nb) if (!clk || !nb) return -EINVAL; - mutex_lock(&prepare_lock); + clk_prepare_lock(); /* search the list of notifiers for this clk */ list_for_each_entry(cn, &clk_notifier_list, node) @@ -1720,7 +1835,7 @@ int clk_notifier_register(struct clk *clk, struct notifier_block *nb) clk->notifier_count++; out: - mutex_unlock(&prepare_lock); + clk_prepare_unlock(); return ret; } @@ -1745,7 +1860,7 @@ int clk_notifier_unregister(struct clk *clk, struct notifier_block *nb) if (!clk || !nb) return -EINVAL; - mutex_lock(&prepare_lock); + clk_prepare_lock(); list_for_each_entry(cn, &clk_notifier_list, node) if (cn->clk == clk) @@ -1766,7 +1881,7 @@ int clk_notifier_unregister(struct clk *clk, struct notifier_block *nb) ret = -ENOENT; } - mutex_unlock(&prepare_lock); + clk_prepare_unlock(); return ret; } diff --git a/drivers/clk/mxs/clk.c b/drivers/clk/mxs/clk.c index b24d560..5301bce 100644 --- a/drivers/clk/mxs/clk.c +++ b/drivers/clk/mxs/clk.c @@ -13,6 +13,7 @@ #include <linux/io.h> #include <linux/jiffies.h> #include <linux/spinlock.h> +#include "clk.h" DEFINE_SPINLOCK(mxs_lock); diff --git a/drivers/clk/spear/spear1340_clock.c b/drivers/clk/spear/spear1340_clock.c index 82abea3..35e7e26 100644 --- a/drivers/clk/spear/spear1340_clock.c +++ b/drivers/clk/spear/spear1340_clock.c @@ -960,47 +960,47 @@ void __init spear1340_clk_init(void) SPEAR1340_SPDIF_IN_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "d0100000.spdif-in"); - clk = clk_register_gate(NULL, "acp_clk", "acp_mclk", 0, + clk = clk_register_gate(NULL, "acp_clk", "ahb_clk", 0, SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_ACP_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "acp_clk"); - clk = clk_register_gate(NULL, "plgpio_clk", "plgpio_mclk", 0, + clk = clk_register_gate(NULL, "plgpio_clk", "ahb_clk", 0, SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_PLGPIO_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "e2800000.gpio"); - clk = clk_register_gate(NULL, "video_dec_clk", "video_dec_mclk", 0, + clk = clk_register_gate(NULL, "video_dec_clk", "ahb_clk", 0, SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_VIDEO_DEC_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "video_dec"); - clk = clk_register_gate(NULL, "video_enc_clk", "video_enc_mclk", 0, + clk = clk_register_gate(NULL, "video_enc_clk", "ahb_clk", 0, SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_VIDEO_ENC_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "video_enc"); - clk = clk_register_gate(NULL, "video_in_clk", "video_in_mclk", 0, + clk = clk_register_gate(NULL, "video_in_clk", "ahb_clk", 0, SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_VIDEO_IN_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "spear_vip"); - clk = clk_register_gate(NULL, "cam0_clk", "cam0_mclk", 0, + clk = clk_register_gate(NULL, "cam0_clk", "ahb_clk", 0, SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM0_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "d0200000.cam0"); - clk = clk_register_gate(NULL, "cam1_clk", "cam1_mclk", 0, + clk = clk_register_gate(NULL, "cam1_clk", "ahb_clk", 0, SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM1_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "d0300000.cam1"); - clk = clk_register_gate(NULL, "cam2_clk", "cam2_mclk", 0, + clk = clk_register_gate(NULL, "cam2_clk", "ahb_clk", 0, SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM2_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "d0400000.cam2"); - clk = clk_register_gate(NULL, "cam3_clk", "cam3_mclk", 0, + clk = clk_register_gate(NULL, "cam3_clk", "ahb_clk", 0, SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM3_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "d0500000.cam3"); diff --git a/drivers/clk/sunxi/Makefile b/drivers/clk/sunxi/Makefile new file mode 100644 index 0000000..b5bac91 --- /dev/null +++ b/drivers/clk/sunxi/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for sunxi specific clk +# + +obj-y += clk-sunxi.o clk-factors.o diff --git a/drivers/clk/sunxi/clk-factors.c b/drivers/clk/sunxi/clk-factors.c new file mode 100644 index 0000000..88523f9 --- /dev/null +++ b/drivers/clk/sunxi/clk-factors.c @@ -0,0 +1,180 @@ +/* + * Copyright (C) 2013 Emilio López <emilio@elopez.com.ar> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Adjustable factor-based clock implementation + */ + +#include <linux/clk-provider.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/io.h> +#include <linux/err.h> +#include <linux/string.h> + +#include <linux/delay.h> + +#include "clk-factors.h" + +/* + * DOC: basic adjustable factor-based clock that cannot gate + * + * Traits of this clock: + * prepare - clk_prepare only ensures that parents are prepared + * enable - clk_enable only ensures that parents are enabled + * rate - rate is adjustable. + * clk->rate = (parent->rate * N * (K + 1) >> P) / (M + 1) + * parent - fixed parent. No clk_set_parent support + */ + +struct clk_factors { + struct clk_hw hw; + void __iomem *reg; + struct clk_factors_config *config; + void (*get_factors) (u32 *rate, u32 parent, u8 *n, u8 *k, u8 *m, u8 *p); + spinlock_t *lock; +}; + +#define to_clk_factors(_hw) container_of(_hw, struct clk_factors, hw) + +#define SETMASK(len, pos) (((-1U) >> (31-len)) << (pos)) +#define CLRMASK(len, pos) (~(SETMASK(len, pos))) +#define FACTOR_GET(bit, len, reg) (((reg) & SETMASK(len, bit)) >> (bit)) + +#define FACTOR_SET(bit, len, reg, val) \ + (((reg) & CLRMASK(len, bit)) | (val << (bit))) + +static unsigned long clk_factors_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + u8 n = 1, k = 0, p = 0, m = 0; + u32 reg; + unsigned long rate; + struct clk_factors *factors = to_clk_factors(hw); + struct clk_factors_config *config = factors->config; + + /* Fetch the register value */ + reg = readl(factors->reg); + + /* Get each individual factor if applicable */ + if (config->nwidth != SUNXI_FACTORS_NOT_APPLICABLE) + n = FACTOR_GET(config->nshift, config->nwidth, reg); + if (config->kwidth != SUNXI_FACTORS_NOT_APPLICABLE) + k = FACTOR_GET(config->kshift, config->kwidth, reg); + if (config->mwidth != SUNXI_FACTORS_NOT_APPLICABLE) + m = FACTOR_GET(config->mshift, config->mwidth, reg); + if (config->pwidth != SUNXI_FACTORS_NOT_APPLICABLE) + p = FACTOR_GET(config->pshift, config->pwidth, reg); + + /* Calculate the rate */ + rate = (parent_rate * n * (k + 1) >> p) / (m + 1); + + return rate; +} + +static long clk_factors_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + struct clk_factors *factors = to_clk_factors(hw); + factors->get_factors((u32 *)&rate, (u32)*parent_rate, + NULL, NULL, NULL, NULL); + + return rate; +} + +static int clk_factors_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + u8 n, k, m, p; + u32 reg; + struct clk_factors *factors = to_clk_factors(hw); + struct clk_factors_config *config = factors->config; + unsigned long flags = 0; + + factors->get_factors((u32 *)&rate, (u32)parent_rate, &n, &k, &m, &p); + + if (factors->lock) + spin_lock_irqsave(factors->lock, flags); + + /* Fetch the register value */ + reg = readl(factors->reg); + + /* Set up the new factors - macros do not do anything if width is 0 */ + reg = FACTOR_SET(config->nshift, config->nwidth, reg, n); + reg = FACTOR_SET(config->kshift, config->kwidth, reg, k); + reg = FACTOR_SET(config->mshift, config->mwidth, reg, m); + reg = FACTOR_SET(config->pshift, config->pwidth, reg, p); + + /* Apply them now */ + writel(reg, factors->reg); + + /* delay 500us so pll stabilizes */ + __delay((rate >> 20) * 500 / 2); + + if (factors->lock) + spin_unlock_irqrestore(factors->lock, flags); + + return 0; +} + +static const struct clk_ops clk_factors_ops = { + .recalc_rate = clk_factors_recalc_rate, + .round_rate = clk_factors_round_rate, + .set_rate = clk_factors_set_rate, +}; + +/** + * clk_register_factors - register a factors clock with + * the clock framework + * @dev: device registering this clock + * @name: name of this clock + * @parent_name: name of clock's parent + * @flags: framework-specific flags + * @reg: register address to adjust factors + * @config: shift and width of factors n, k, m and p + * @get_factors: function to calculate the factors for a given frequency + * @lock: shared register lock for this clock + */ +struct clk *clk_register_factors(struct device *dev, const char *name, + const char *parent_name, + unsigned long flags, void __iomem *reg, + struct clk_factors_config *config, + void (*get_factors)(u32 *rate, u32 parent, + u8 *n, u8 *k, u8 *m, u8 *p), + spinlock_t *lock) +{ + struct clk_factors *factors; + struct clk *clk; + struct clk_init_data init; + + /* allocate the factors */ + factors = kzalloc(sizeof(struct clk_factors), GFP_KERNEL); + if (!factors) { + pr_err("%s: could not allocate factors clk\n", __func__); + return ERR_PTR(-ENOMEM); + } + + init.name = name; + init.ops = &clk_factors_ops; + init.flags = flags; + init.parent_names = (parent_name ? &parent_name : NULL); + init.num_parents = (parent_name ? 1 : 0); + + /* struct clk_factors assignments */ + factors->reg = reg; + factors->config = config; + factors->lock = lock; + factors->hw.init = &init; + factors->get_factors = get_factors; + + /* register the clock */ + clk = clk_register(dev, &factors->hw); + + if (IS_ERR(clk)) + kfree(factors); + + return clk; +} diff --git a/drivers/clk/sunxi/clk-factors.h b/drivers/clk/sunxi/clk-factors.h new file mode 100644 index 0000000..f49851c --- /dev/null +++ b/drivers/clk/sunxi/clk-factors.h @@ -0,0 +1,27 @@ +#ifndef __MACH_SUNXI_CLK_FACTORS_H +#define __MACH_SUNXI_CLK_FACTORS_H + +#include <linux/clk-provider.h> +#include <linux/clkdev.h> + +#define SUNXI_FACTORS_NOT_APPLICABLE (0) + +struct clk_factors_config { + u8 nshift; + u8 nwidth; + u8 kshift; + u8 kwidth; + u8 mshift; + u8 mwidth; + u8 pshift; + u8 pwidth; +}; + +struct clk *clk_register_factors(struct device *dev, const char *name, + const char *parent_name, + unsigned long flags, void __iomem *reg, + struct clk_factors_config *config, + void (*get_factors) (u32 *rate, u32 parent_rate, + u8 *n, u8 *k, u8 *m, u8 *p), + spinlock_t *lock); +#endif diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c new file mode 100644 index 0000000..d528a24 --- /dev/null +++ b/drivers/clk/sunxi/clk-sunxi.c @@ -0,0 +1,362 @@ +/* + * Copyright 2013 Emilio López + * + * Emilio López <emilio@elopez.com.ar> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/clk-provider.h> +#include <linux/clkdev.h> +#include <linux/clk/sunxi.h> +#include <linux/of.h> +#include <linux/of_address.h> + +#include "clk-factors.h" + +static DEFINE_SPINLOCK(clk_lock); + +/** + * sunxi_osc_clk_setup() - Setup function for gatable oscillator + */ + +#define SUNXI_OSC24M_GATE 0 + +static void __init sunxi_osc_clk_setup(struct device_node *node) +{ + struct clk *clk; + const char *clk_name = node->name; + const char *parent; + void *reg; + + reg = of_iomap(node, 0); + + parent = of_clk_get_parent_name(node, 0); + + clk = clk_register_gate(NULL, clk_name, parent, CLK_IGNORE_UNUSED, + reg, SUNXI_OSC24M_GATE, 0, &clk_lock); + + if (clk) { + of_clk_add_provider(node, of_clk_src_simple_get, clk); + clk_register_clkdev(clk, clk_name, NULL); + } +} + + + +/** + * sunxi_get_pll1_factors() - calculates n, k, m, p factors for PLL1 + * PLL1 rate is calculated as follows + * rate = (parent_rate * n * (k + 1) >> p) / (m + 1); + * parent_rate is always 24Mhz + */ + +static void sunxi_get_pll1_factors(u32 *freq, u32 parent_rate, + u8 *n, u8 *k, u8 *m, u8 *p) +{ + u8 div; + + /* Normalize value to a 6M multiple */ + div = *freq / 6000000; + *freq = 6000000 * div; + + /* we were called to round the frequency, we can now return */ + if (n == NULL) + return; + + /* m is always zero for pll1 */ + *m = 0; + + /* k is 1 only on these cases */ + if (*freq >= 768000000 || *freq == 42000000 || *freq == 54000000) + *k = 1; + else + *k = 0; + + /* p will be 3 for divs under 10 */ + if (div < 10) + *p = 3; + + /* p will be 2 for divs between 10 - 20 and odd divs under 32 */ + else if (div < 20 || (div < 32 && (div & 1))) + *p = 2; + + /* p will be 1 for even divs under 32, divs under 40 and odd pairs + * of divs between 40-62 */ + else if (div < 40 || (div < 64 && (div & 2))) + *p = 1; + + /* any other entries have p = 0 */ + else + *p = 0; + + /* calculate a suitable n based on k and p */ + div <<= *p; + div /= (*k + 1); + *n = div / 4; +} + + + +/** + * sunxi_get_apb1_factors() - calculates m, p factors for APB1 + * APB1 rate is calculated as follows + * rate = (parent_rate >> p) / (m + 1); + */ + +static void sunxi_get_apb1_factors(u32 *freq, u32 parent_rate, + u8 *n, u8 *k, u8 *m, u8 *p) +{ + u8 calcm, calcp; + + if (parent_rate < *freq) + *freq = parent_rate; + + parent_rate = (parent_rate + (*freq - 1)) / *freq; + + /* Invalid rate! */ + if (parent_rate > 32) + return; + + if (parent_rate <= 4) + calcp = 0; + else if (parent_rate <= 8) + calcp = 1; + else if (parent_rate <= 16) + calcp = 2; + else + calcp = 3; + + calcm = (parent_rate >> calcp) - 1; + + *freq = (parent_rate >> calcp) / (calcm + 1); + + /* we were called to round the frequency, we can now return */ + if (n == NULL) + return; + + *m = calcm; + *p = calcp; +} + + + +/** + * sunxi_factors_clk_setup() - Setup function for factor clocks + */ + +struct factors_data { + struct clk_factors_config *table; + void (*getter) (u32 *rate, u32 parent_rate, u8 *n, u8 *k, u8 *m, u8 *p); +}; + +static struct clk_factors_config pll1_config = { + .nshift = 8, + .nwidth = 5, + .kshift = 4, + .kwidth = 2, + .mshift = 0, + .mwidth = 2, + .pshift = 16, + .pwidth = 2, +}; + +static struct clk_factors_config apb1_config = { + .mshift = 0, + .mwidth = 5, + .pshift = 16, + .pwidth = 2, +}; + +static const __initconst struct factors_data pll1_data = { + .table = &pll1_config, + .getter = sunxi_get_pll1_factors, +}; + +static const __initconst struct factors_data apb1_data = { + .table = &apb1_config, + .getter = sunxi_get_apb1_factors, +}; + +static void __init sunxi_factors_clk_setup(struct device_node *node, + struct factors_data *data) +{ + struct clk *clk; + const char *clk_name = node->name; + const char *parent; + void *reg; + + reg = of_iomap(node, 0); + + parent = of_clk_get_parent_name(node, 0); + + clk = clk_register_factors(NULL, clk_name, parent, CLK_IGNORE_UNUSED, + reg, data->table, data->getter, &clk_lock); + + if (clk) { + of_clk_add_provider(node, of_clk_src_simple_get, clk); + clk_register_clkdev(clk, clk_name, NULL); + } +} + + + +/** + * sunxi_mux_clk_setup() - Setup function for muxes + */ + +#define SUNXI_MUX_GATE_WIDTH 2 + +struct mux_data { + u8 shift; +}; + +static const __initconst struct mux_data cpu_data = { + .shift = 16, +}; + +static const __initconst struct mux_data apb1_mux_data = { + .shift = 24, +}; + +static void __init sunxi_mux_clk_setup(struct device_node *node, + struct mux_data *data) +{ + struct clk *clk; + const char *clk_name = node->name; + const char **parents = kmalloc(sizeof(char *) * 5, GFP_KERNEL); + void *reg; + int i = 0; + + reg = of_iomap(node, 0); + + while (i < 5 && (parents[i] = of_clk_get_parent_name(node, i)) != NULL) + i++; + + clk = clk_register_mux(NULL, clk_name, parents, i, 0, reg, + data->shift, SUNXI_MUX_GATE_WIDTH, + 0, &clk_lock); + + if (clk) { + of_clk_add_provider(node, of_clk_src_simple_get, clk); + clk_register_clkdev(clk, clk_name, NULL); + } +} + + + +/** + * sunxi_divider_clk_setup() - Setup function for simple divider clocks + */ + +#define SUNXI_DIVISOR_WIDTH 2 + +struct div_data { + u8 shift; + u8 pow; +}; + +static const __initconst struct div_data axi_data = { + .shift = 0, + .pow = 0, +}; + +static const __initconst struct div_data ahb_data = { + .shift = 4, + .pow = 1, +}; + +static const __initconst struct div_data apb0_data = { + .shift = 8, + .pow = 1, +}; + +static void __init sunxi_divider_clk_setup(struct device_node *node, + struct div_data *data) +{ + struct clk *clk; + const char *clk_name = node->name; + const char *clk_parent; + void *reg; + + reg = of_iomap(node, 0); + + clk_parent = of_clk_get_parent_name(node, 0); + + clk = clk_register_divider(NULL, clk_name, clk_parent, 0, + reg, data->shift, SUNXI_DIVISOR_WIDTH, + data->pow ? CLK_DIVIDER_POWER_OF_TWO : 0, + &clk_lock); + if (clk) { + of_clk_add_provider(node, of_clk_src_simple_get, clk); + clk_register_clkdev(clk, clk_name, NULL); + } +} + + +/* Matches for of_clk_init */ +static const __initconst struct of_device_id clk_match[] = { + {.compatible = "fixed-clock", .data = of_fixed_clk_setup,}, + {.compatible = "allwinner,sun4i-osc-clk", .data = sunxi_osc_clk_setup,}, + {} +}; + +/* Matches for factors clocks */ +static const __initconst struct of_device_id clk_factors_match[] = { + {.compatible = "allwinner,sun4i-pll1-clk", .data = &pll1_data,}, + {.compatible = "allwinner,sun4i-apb1-clk", .data = &apb1_data,}, + {} +}; + +/* Matches for divider clocks */ +static const __initconst struct of_device_id clk_div_match[] = { + {.compatible = "allwinner,sun4i-axi-clk", .data = &axi_data,}, + {.compatible = "allwinner,sun4i-ahb-clk", .data = &ahb_data,}, + {.compatible = "allwinner,sun4i-apb0-clk", .data = &apb0_data,}, + {} +}; + +/* Matches for mux clocks */ +static const __initconst struct of_device_id clk_mux_match[] = { + {.compatible = "allwinner,sun4i-cpu-clk", .data = &cpu_data,}, + {.compatible = "allwinner,sun4i-apb1-mux-clk", .data = &apb1_mux_data,}, + {} +}; + +static void __init of_sunxi_table_clock_setup(const struct of_device_id *clk_match, + void *function) +{ + struct device_node *np; + const struct div_data *data; + const struct of_device_id *match; + void (*setup_function)(struct device_node *, const void *) = function; + + for_each_matching_node(np, clk_match) { + match = of_match_node(clk_match, np); + data = match->data; + setup_function(np, data); + } +} + +void __init sunxi_init_clocks(void) +{ + /* Register all the simple sunxi clocks on DT */ + of_clk_init(clk_match); + + /* Register factor clocks */ + of_sunxi_table_clock_setup(clk_factors_match, sunxi_factors_clk_setup); + + /* Register divider clocks */ + of_sunxi_table_clock_setup(clk_div_match, sunxi_divider_clk_setup); + + /* Register mux clocks */ + of_sunxi_table_clock_setup(clk_mux_match, sunxi_mux_clk_setup); +} diff --git a/drivers/clk/tegra/Makefile b/drivers/clk/tegra/Makefile index 2b41b0f..f49fac2 100644 --- a/drivers/clk/tegra/Makefile +++ b/drivers/clk/tegra/Makefile @@ -9,3 +9,4 @@ obj-y += clk-super.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += clk-tegra20.o obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += clk-tegra30.o +obj-$(CONFIG_ARCH_TEGRA_114_SOC) += clk-tegra114.o diff --git a/drivers/clk/tegra/clk-periph-gate.c b/drivers/clk/tegra/clk-periph-gate.c index 6dd5332..bafee98 100644 --- a/drivers/clk/tegra/clk-periph-gate.c +++ b/drivers/clk/tegra/clk-periph-gate.c @@ -41,7 +41,9 @@ static DEFINE_SPINLOCK(periph_ref_lock); #define write_rst_clr(val, gate) \ writel_relaxed(val, gate->clk_base + (gate->regs->rst_clr_reg)) -#define periph_clk_to_bit(periph) (1 << (gate->clk_num % 32)) +#define periph_clk_to_bit(gate) (1 << (gate->clk_num % 32)) + +#define LVL2_CLK_GATE_OVRE 0x554 /* Peripheral gate clock ops */ static int clk_periph_is_enabled(struct clk_hw *hw) @@ -83,6 +85,13 @@ static int clk_periph_enable(struct clk_hw *hw) } } + if (gate->flags & TEGRA_PERIPH_WAR_1005168) { + writel_relaxed(0, gate->clk_base + LVL2_CLK_GATE_OVRE); + writel_relaxed(BIT(22), gate->clk_base + LVL2_CLK_GATE_OVRE); + udelay(1); + writel_relaxed(0, gate->clk_base + LVL2_CLK_GATE_OVRE); + } + spin_unlock_irqrestore(&periph_ref_lock, flags); return 0; diff --git a/drivers/clk/tegra/clk-periph.c b/drivers/clk/tegra/clk-periph.c index 788486e6..b2309d3 100644 --- a/drivers/clk/tegra/clk-periph.c +++ b/drivers/clk/tegra/clk-periph.c @@ -16,6 +16,7 @@ #include <linux/clk.h> #include <linux/clk-provider.h> +#include <linux/export.h> #include <linux/slab.h> #include <linux/err.h> @@ -128,6 +129,7 @@ void tegra_periph_reset_deassert(struct clk *c) tegra_periph_reset(gate, 0); } +EXPORT_SYMBOL(tegra_periph_reset_deassert); void tegra_periph_reset_assert(struct clk *c) { @@ -147,6 +149,7 @@ void tegra_periph_reset_assert(struct clk *c) tegra_periph_reset(gate, 1); } +EXPORT_SYMBOL(tegra_periph_reset_assert); const struct clk_ops tegra_clk_periph_ops = { .get_parent = clk_periph_get_parent, @@ -170,14 +173,15 @@ const struct clk_ops tegra_clk_periph_nodiv_ops = { static struct clk *_tegra_clk_register_periph(const char *name, const char **parent_names, int num_parents, struct tegra_clk_periph *periph, - void __iomem *clk_base, u32 offset, bool div) + void __iomem *clk_base, u32 offset, bool div, + unsigned long flags) { struct clk *clk; struct clk_init_data init; init.name = name; init.ops = div ? &tegra_clk_periph_ops : &tegra_clk_periph_nodiv_ops; - init.flags = div ? 0 : CLK_SET_RATE_PARENT; + init.flags = flags; init.parent_names = parent_names; init.num_parents = num_parents; @@ -202,10 +206,10 @@ static struct clk *_tegra_clk_register_periph(const char *name, struct clk *tegra_clk_register_periph(const char *name, const char **parent_names, int num_parents, struct tegra_clk_periph *periph, void __iomem *clk_base, - u32 offset) + u32 offset, unsigned long flags) { return _tegra_clk_register_periph(name, parent_names, num_parents, - periph, clk_base, offset, true); + periph, clk_base, offset, true, flags); } struct clk *tegra_clk_register_periph_nodiv(const char *name, @@ -214,5 +218,5 @@ struct clk *tegra_clk_register_periph_nodiv(const char *name, u32 offset) { return _tegra_clk_register_periph(name, parent_names, num_parents, - periph, clk_base, offset, false); + periph, clk_base, offset, false, CLK_SET_RATE_PARENT); } diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c index 165f247..17c2cc0 100644 --- a/drivers/clk/tegra/clk-pll.c +++ b/drivers/clk/tegra/clk-pll.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved. + * Copyright (c) 2012, 2013, NVIDIA CORPORATION. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, @@ -79,6 +79,48 @@ #define PLLE_SS_CTRL 0x68 #define PLLE_SS_DISABLE (7 << 10) +#define PLLE_AUX_PLLP_SEL BIT(2) +#define PLLE_AUX_ENABLE_SWCTL BIT(4) +#define PLLE_AUX_SEQ_ENABLE BIT(24) +#define PLLE_AUX_PLLRE_SEL BIT(28) + +#define PLLE_MISC_PLLE_PTS BIT(8) +#define PLLE_MISC_IDDQ_SW_VALUE BIT(13) +#define PLLE_MISC_IDDQ_SW_CTRL BIT(14) +#define PLLE_MISC_VREG_BG_CTRL_SHIFT 4 +#define PLLE_MISC_VREG_BG_CTRL_MASK (3 << PLLE_MISC_VREG_BG_CTRL_SHIFT) +#define PLLE_MISC_VREG_CTRL_SHIFT 2 +#define PLLE_MISC_VREG_CTRL_MASK (2 << PLLE_MISC_VREG_CTRL_SHIFT) + +#define PLLCX_MISC_STROBE BIT(31) +#define PLLCX_MISC_RESET BIT(30) +#define PLLCX_MISC_SDM_DIV_SHIFT 28 +#define PLLCX_MISC_SDM_DIV_MASK (0x3 << PLLCX_MISC_SDM_DIV_SHIFT) +#define PLLCX_MISC_FILT_DIV_SHIFT 26 +#define PLLCX_MISC_FILT_DIV_MASK (0x3 << PLLCX_MISC_FILT_DIV_SHIFT) +#define PLLCX_MISC_ALPHA_SHIFT 18 +#define PLLCX_MISC_DIV_LOW_RANGE \ + ((0x1 << PLLCX_MISC_SDM_DIV_SHIFT) | \ + (0x1 << PLLCX_MISC_FILT_DIV_SHIFT)) +#define PLLCX_MISC_DIV_HIGH_RANGE \ + ((0x2 << PLLCX_MISC_SDM_DIV_SHIFT) | \ + (0x2 << PLLCX_MISC_FILT_DIV_SHIFT)) +#define PLLCX_MISC_COEF_LOW_RANGE \ + ((0x14 << PLLCX_MISC_KA_SHIFT) | (0x38 << PLLCX_MISC_KB_SHIFT)) +#define PLLCX_MISC_KA_SHIFT 2 +#define PLLCX_MISC_KB_SHIFT 9 +#define PLLCX_MISC_DEFAULT (PLLCX_MISC_COEF_LOW_RANGE | \ + (0x19 << PLLCX_MISC_ALPHA_SHIFT) | \ + PLLCX_MISC_DIV_LOW_RANGE | \ + PLLCX_MISC_RESET) +#define PLLCX_MISC1_DEFAULT 0x000d2308 +#define PLLCX_MISC2_DEFAULT 0x30211200 +#define PLLCX_MISC3_DEFAULT 0x200 + +#define PMC_PLLM_WB0_OVERRIDE 0x1dc +#define PMC_PLLM_WB0_OVERRIDE_2 0x2b0 +#define PMC_PLLM_WB0_OVERRIDE_2_DIVP_MASK BIT(27) + #define PMC_SATA_PWRGT 0x1ac #define PMC_SATA_PWRGT_PLLE_IDDQ_VALUE BIT(5) #define PMC_SATA_PWRGT_PLLE_IDDQ_SWCTL BIT(4) @@ -101,6 +143,24 @@ #define divn_max(p) (divn_mask(p)) #define divp_max(p) (1 << (divp_mask(p))) + +#ifdef CONFIG_ARCH_TEGRA_114_SOC +/* PLLXC has 4-bit PDIV, but entry 15 is not allowed in h/w */ +#define PLLXC_PDIV_MAX 14 + +/* non-monotonic mapping below is not a typo */ +static u8 pllxc_p[PLLXC_PDIV_MAX + 1] = { + /* PDIV: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 */ + /* p: */ 1, 2, 3, 4, 5, 6, 8, 10, 12, 16, 12, 16, 20, 24, 32 +}; + +#define PLLCX_PDIV_MAX 7 +static u8 pllcx_p[PLLCX_PDIV_MAX + 1] = { + /* PDIV: 0, 1, 2, 3, 4, 5, 6, 7 */ + /* p: */ 1, 2, 3, 4, 6, 8, 12, 16 +}; +#endif + static void clk_pll_enable_lock(struct tegra_clk_pll *pll) { u32 val; @@ -108,25 +168,36 @@ static void clk_pll_enable_lock(struct tegra_clk_pll *pll) if (!(pll->flags & TEGRA_PLL_USE_LOCK)) return; + if (!(pll->flags & TEGRA_PLL_HAS_LOCK_ENABLE)) + return; + val = pll_readl_misc(pll); val |= BIT(pll->params->lock_enable_bit_idx); pll_writel_misc(val, pll); } -static int clk_pll_wait_for_lock(struct tegra_clk_pll *pll, - void __iomem *lock_addr, u32 lock_bit_idx) +static int clk_pll_wait_for_lock(struct tegra_clk_pll *pll) { int i; - u32 val; + u32 val, lock_mask; + void __iomem *lock_addr; if (!(pll->flags & TEGRA_PLL_USE_LOCK)) { udelay(pll->params->lock_delay); return 0; } + lock_addr = pll->clk_base; + if (pll->flags & TEGRA_PLL_LOCK_MISC) + lock_addr += pll->params->misc_reg; + else + lock_addr += pll->params->base_reg; + + lock_mask = pll->params->lock_mask; + for (i = 0; i < pll->params->lock_delay; i++) { val = readl_relaxed(lock_addr); - if (val & BIT(lock_bit_idx)) { + if ((val & lock_mask) == lock_mask) { udelay(PLL_POST_LOCK_DELAY); return 0; } @@ -155,7 +226,7 @@ static int clk_pll_is_enabled(struct clk_hw *hw) return val & PLL_BASE_ENABLE ? 1 : 0; } -static int _clk_pll_enable(struct clk_hw *hw) +static void _clk_pll_enable(struct clk_hw *hw) { struct tegra_clk_pll *pll = to_clk_pll(hw); u32 val; @@ -163,7 +234,8 @@ static int _clk_pll_enable(struct clk_hw *hw) clk_pll_enable_lock(pll); val = pll_readl_base(pll); - val &= ~PLL_BASE_BYPASS; + if (pll->flags & TEGRA_PLL_BYPASS) + val &= ~PLL_BASE_BYPASS; val |= PLL_BASE_ENABLE; pll_writel_base(val, pll); @@ -172,11 +244,6 @@ static int _clk_pll_enable(struct clk_hw *hw) val |= PMC_PLLP_WB0_OVERRIDE_PLLM_ENABLE; writel_relaxed(val, pll->pmc + PMC_PLLP_WB0_OVERRIDE); } - - clk_pll_wait_for_lock(pll, pll->clk_base + pll->params->base_reg, - pll->params->lock_bit_idx); - - return 0; } static void _clk_pll_disable(struct clk_hw *hw) @@ -185,7 +252,9 @@ static void _clk_pll_disable(struct clk_hw *hw) u32 val; val = pll_readl_base(pll); - val &= ~(PLL_BASE_BYPASS | PLL_BASE_ENABLE); + if (pll->flags & TEGRA_PLL_BYPASS) + val &= ~PLL_BASE_BYPASS; + val &= ~PLL_BASE_ENABLE; pll_writel_base(val, pll); if (pll->flags & TEGRA_PLLM) { @@ -204,7 +273,9 @@ static int clk_pll_enable(struct clk_hw *hw) if (pll->lock) spin_lock_irqsave(pll->lock, flags); - ret = _clk_pll_enable(hw); + _clk_pll_enable(hw); + + ret = clk_pll_wait_for_lock(pll); if (pll->lock) spin_unlock_irqrestore(pll->lock, flags); @@ -241,8 +312,6 @@ static int _get_table_rate(struct clk_hw *hw, if (sel->input_rate == 0) return -EINVAL; - BUG_ON(sel->p < 1); - cfg->input_rate = sel->input_rate; cfg->output_rate = sel->output_rate; cfg->m = sel->m; @@ -257,6 +326,7 @@ static int _calc_rate(struct clk_hw *hw, struct tegra_clk_pll_freq_table *cfg, unsigned long rate, unsigned long parent_rate) { struct tegra_clk_pll *pll = to_clk_pll(hw); + struct pdiv_map *p_tohw = pll->params->pdiv_tohw; unsigned long cfreq; u32 p_div = 0; @@ -290,88 +360,119 @@ static int _calc_rate(struct clk_hw *hw, struct tegra_clk_pll_freq_table *cfg, cfg->output_rate <<= 1) p_div++; - cfg->p = 1 << p_div; cfg->m = parent_rate / cfreq; cfg->n = cfg->output_rate / cfreq; cfg->cpcon = OUT_OF_TABLE_CPCON; if (cfg->m > divm_max(pll) || cfg->n > divn_max(pll) || - cfg->p > divp_max(pll) || cfg->output_rate > pll->params->vco_max) { + (1 << p_div) > divp_max(pll) + || cfg->output_rate > pll->params->vco_max) { pr_err("%s: Failed to set %s rate %lu\n", __func__, __clk_get_name(hw->clk), rate); return -EINVAL; } + if (p_tohw) { + p_div = 1 << p_div; + while (p_tohw->pdiv) { + if (p_div <= p_tohw->pdiv) { + cfg->p = p_tohw->hw_val; + break; + } + p_tohw++; + } + if (!p_tohw->pdiv) + return -EINVAL; + } else + cfg->p = p_div; + return 0; } -static int _program_pll(struct clk_hw *hw, struct tegra_clk_pll_freq_table *cfg, - unsigned long rate) +static void _update_pll_mnp(struct tegra_clk_pll *pll, + struct tegra_clk_pll_freq_table *cfg) { - struct tegra_clk_pll *pll = to_clk_pll(hw); - unsigned long flags = 0; - u32 divp, val, old_base; - int state; - - divp = __ffs(cfg->p); - - if (pll->flags & TEGRA_PLLU) - divp ^= 1; + u32 val; - if (pll->lock) - spin_lock_irqsave(pll->lock, flags); + val = pll_readl_base(pll); - old_base = val = pll_readl_base(pll); val &= ~((divm_mask(pll) << pll->divm_shift) | (divn_mask(pll) << pll->divn_shift) | (divp_mask(pll) << pll->divp_shift)); val |= ((cfg->m << pll->divm_shift) | (cfg->n << pll->divn_shift) | - (divp << pll->divp_shift)); - if (val == old_base) { - if (pll->lock) - spin_unlock_irqrestore(pll->lock, flags); - return 0; + (cfg->p << pll->divp_shift)); + + pll_writel_base(val, pll); +} + +static void _get_pll_mnp(struct tegra_clk_pll *pll, + struct tegra_clk_pll_freq_table *cfg) +{ + u32 val; + + val = pll_readl_base(pll); + + cfg->m = (val >> pll->divm_shift) & (divm_mask(pll)); + cfg->n = (val >> pll->divn_shift) & (divn_mask(pll)); + cfg->p = (val >> pll->divp_shift) & (divp_mask(pll)); +} + +static void _update_pll_cpcon(struct tegra_clk_pll *pll, + struct tegra_clk_pll_freq_table *cfg, + unsigned long rate) +{ + u32 val; + + val = pll_readl_misc(pll); + + val &= ~(PLL_MISC_CPCON_MASK << PLL_MISC_CPCON_SHIFT); + val |= cfg->cpcon << PLL_MISC_CPCON_SHIFT; + + if (pll->flags & TEGRA_PLL_SET_LFCON) { + val &= ~(PLL_MISC_LFCON_MASK << PLL_MISC_LFCON_SHIFT); + if (cfg->n >= PLLDU_LFCON_SET_DIVN) + val |= 1 << PLL_MISC_LFCON_SHIFT; + } else if (pll->flags & TEGRA_PLL_SET_DCCON) { + val &= ~(1 << PLL_MISC_DCCON_SHIFT); + if (rate >= (pll->params->vco_max >> 1)) + val |= 1 << PLL_MISC_DCCON_SHIFT; } + pll_writel_misc(val, pll); +} + +static int _program_pll(struct clk_hw *hw, struct tegra_clk_pll_freq_table *cfg, + unsigned long rate) +{ + struct tegra_clk_pll *pll = to_clk_pll(hw); + int state, ret = 0; + state = clk_pll_is_enabled(hw); - if (state) { + if (state) _clk_pll_disable(hw); - val &= ~(PLL_BASE_BYPASS | PLL_BASE_ENABLE); - } - pll_writel_base(val, pll); - if (pll->flags & TEGRA_PLL_HAS_CPCON) { - val = pll_readl_misc(pll); - val &= ~(PLL_MISC_CPCON_MASK << PLL_MISC_CPCON_SHIFT); - val |= cfg->cpcon << PLL_MISC_CPCON_SHIFT; - if (pll->flags & TEGRA_PLL_SET_LFCON) { - val &= ~(PLL_MISC_LFCON_MASK << PLL_MISC_LFCON_SHIFT); - if (cfg->n >= PLLDU_LFCON_SET_DIVN) - val |= 0x1 << PLL_MISC_LFCON_SHIFT; - } else if (pll->flags & TEGRA_PLL_SET_DCCON) { - val &= ~(0x1 << PLL_MISC_DCCON_SHIFT); - if (rate >= (pll->params->vco_max >> 1)) - val |= 0x1 << PLL_MISC_DCCON_SHIFT; - } - pll_writel_misc(val, pll); - } + _update_pll_mnp(pll, cfg); - if (pll->lock) - spin_unlock_irqrestore(pll->lock, flags); + if (pll->flags & TEGRA_PLL_HAS_CPCON) + _update_pll_cpcon(pll, cfg, rate); - if (state) - clk_pll_enable(hw); + if (state) { + _clk_pll_enable(hw); + ret = clk_pll_wait_for_lock(pll); + } - return 0; + return ret; } static int clk_pll_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long parent_rate) { struct tegra_clk_pll *pll = to_clk_pll(hw); - struct tegra_clk_pll_freq_table cfg; + struct tegra_clk_pll_freq_table cfg, old_cfg; + unsigned long flags = 0; + int ret = 0; if (pll->flags & TEGRA_PLL_FIXED) { if (rate != pll->fixed_rate) { @@ -387,7 +488,18 @@ static int clk_pll_set_rate(struct clk_hw *hw, unsigned long rate, _calc_rate(hw, &cfg, rate, parent_rate)) return -EINVAL; - return _program_pll(hw, &cfg, rate); + if (pll->lock) + spin_lock_irqsave(pll->lock, flags); + + _get_pll_mnp(pll, &old_cfg); + + if (old_cfg.m != cfg.m || old_cfg.n != cfg.n || old_cfg.p != cfg.p) + ret = _program_pll(hw, &cfg, rate); + + if (pll->lock) + spin_unlock_irqrestore(pll->lock, flags); + + return ret; } static long clk_pll_round_rate(struct clk_hw *hw, unsigned long rate, @@ -409,7 +521,7 @@ static long clk_pll_round_rate(struct clk_hw *hw, unsigned long rate, return -EINVAL; output_rate *= cfg.n; - do_div(output_rate, cfg.m * cfg.p); + do_div(output_rate, cfg.m * (1 << cfg.p)); return output_rate; } @@ -418,11 +530,15 @@ static unsigned long clk_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) { struct tegra_clk_pll *pll = to_clk_pll(hw); - u32 val = pll_readl_base(pll); - u32 divn = 0, divm = 0, divp = 0; + struct tegra_clk_pll_freq_table cfg; + struct pdiv_map *p_tohw = pll->params->pdiv_tohw; + u32 val; u64 rate = parent_rate; + int pdiv; + + val = pll_readl_base(pll); - if (val & PLL_BASE_BYPASS) + if ((pll->flags & TEGRA_PLL_BYPASS) && (val & PLL_BASE_BYPASS)) return parent_rate; if ((pll->flags & TEGRA_PLL_FIXED) && !(val & PLL_BASE_OVERRIDE)) { @@ -435,16 +551,29 @@ static unsigned long clk_pll_recalc_rate(struct clk_hw *hw, return pll->fixed_rate; } - divp = (val >> pll->divp_shift) & (divp_mask(pll)); - if (pll->flags & TEGRA_PLLU) - divp ^= 1; + _get_pll_mnp(pll, &cfg); - divn = (val >> pll->divn_shift) & (divn_mask(pll)); - divm = (val >> pll->divm_shift) & (divm_mask(pll)); - divm *= (1 << divp); + if (p_tohw) { + while (p_tohw->pdiv) { + if (cfg.p == p_tohw->hw_val) { + pdiv = p_tohw->pdiv; + break; + } + p_tohw++; + } + + if (!p_tohw->pdiv) { + WARN_ON(1); + pdiv = 1; + } + } else + pdiv = 1 << cfg.p; + + cfg.m *= pdiv; + + rate *= cfg.n; + do_div(rate, cfg.m); - rate *= divn; - do_div(rate, divm); return rate; } @@ -538,8 +667,8 @@ static int clk_plle_enable(struct clk_hw *hw) val |= (PLL_BASE_BYPASS | PLL_BASE_ENABLE); pll_writel_base(val, pll); - clk_pll_wait_for_lock(pll, pll->clk_base + pll->params->misc_reg, - pll->params->lock_bit_idx); + clk_pll_wait_for_lock(pll); + return 0; } @@ -577,28 +706,531 @@ const struct clk_ops tegra_clk_plle_ops = { .enable = clk_plle_enable, }; -static struct clk *_tegra_clk_register_pll(const char *name, - const char *parent_name, void __iomem *clk_base, - void __iomem *pmc, unsigned long flags, - unsigned long fixed_rate, - struct tegra_clk_pll_params *pll_params, u8 pll_flags, - struct tegra_clk_pll_freq_table *freq_table, spinlock_t *lock, - const struct clk_ops *ops) +#ifdef CONFIG_ARCH_TEGRA_114_SOC + +static int _pll_fixed_mdiv(struct tegra_clk_pll_params *pll_params, + unsigned long parent_rate) +{ + if (parent_rate > pll_params->cf_max) + return 2; + else + return 1; +} + +static int clk_pll_iddq_enable(struct clk_hw *hw) +{ + struct tegra_clk_pll *pll = to_clk_pll(hw); + unsigned long flags = 0; + + u32 val; + int ret; + + if (pll->lock) + spin_lock_irqsave(pll->lock, flags); + + val = pll_readl(pll->params->iddq_reg, pll); + val &= ~BIT(pll->params->iddq_bit_idx); + pll_writel(val, pll->params->iddq_reg, pll); + udelay(2); + + _clk_pll_enable(hw); + + ret = clk_pll_wait_for_lock(pll); + + if (pll->lock) + spin_unlock_irqrestore(pll->lock, flags); + + return 0; +} + +static void clk_pll_iddq_disable(struct clk_hw *hw) +{ + struct tegra_clk_pll *pll = to_clk_pll(hw); + unsigned long flags = 0; + u32 val; + + if (pll->lock) + spin_lock_irqsave(pll->lock, flags); + + _clk_pll_disable(hw); + + val = pll_readl(pll->params->iddq_reg, pll); + val |= BIT(pll->params->iddq_bit_idx); + pll_writel(val, pll->params->iddq_reg, pll); + udelay(2); + + if (pll->lock) + spin_unlock_irqrestore(pll->lock, flags); +} + +static int _calc_dynamic_ramp_rate(struct clk_hw *hw, + struct tegra_clk_pll_freq_table *cfg, + unsigned long rate, unsigned long parent_rate) +{ + struct tegra_clk_pll *pll = to_clk_pll(hw); + unsigned int p; + + if (!rate) + return -EINVAL; + + p = DIV_ROUND_UP(pll->params->vco_min, rate); + cfg->m = _pll_fixed_mdiv(pll->params, parent_rate); + cfg->p = p; + cfg->output_rate = rate * cfg->p; + cfg->n = cfg->output_rate * cfg->m / parent_rate; + + if (cfg->n > divn_max(pll) || cfg->output_rate > pll->params->vco_max) + return -EINVAL; + + return 0; +} + +static int _pll_ramp_calc_pll(struct clk_hw *hw, + struct tegra_clk_pll_freq_table *cfg, + unsigned long rate, unsigned long parent_rate) +{ + struct tegra_clk_pll *pll = to_clk_pll(hw); + int err = 0; + + err = _get_table_rate(hw, cfg, rate, parent_rate); + if (err < 0) + err = _calc_dynamic_ramp_rate(hw, cfg, rate, parent_rate); + else if (cfg->m != _pll_fixed_mdiv(pll->params, parent_rate)) { + WARN_ON(1); + err = -EINVAL; + goto out; + } + + if (!cfg->p || (cfg->p > pll->params->max_p)) + err = -EINVAL; + +out: + return err; +} + +static int clk_pllxc_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct tegra_clk_pll *pll = to_clk_pll(hw); + struct tegra_clk_pll_freq_table cfg, old_cfg; + unsigned long flags = 0; + int ret = 0; + u8 old_p; + + ret = _pll_ramp_calc_pll(hw, &cfg, rate, parent_rate); + if (ret < 0) + return ret; + + if (pll->lock) + spin_lock_irqsave(pll->lock, flags); + + _get_pll_mnp(pll, &old_cfg); + + old_p = pllxc_p[old_cfg.p]; + if (old_cfg.m != cfg.m || old_cfg.n != cfg.n || old_p != cfg.p) { + cfg.p -= 1; + ret = _program_pll(hw, &cfg, rate); + } + + if (pll->lock) + spin_unlock_irqrestore(pll->lock, flags); + + return ret; +} + +static long clk_pll_ramp_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *prate) +{ + struct tegra_clk_pll_freq_table cfg; + int ret = 0; + u64 output_rate = *prate; + + ret = _pll_ramp_calc_pll(hw, &cfg, rate, *prate); + if (ret < 0) + return ret; + + output_rate *= cfg.n; + do_div(output_rate, cfg.m * cfg.p); + + return output_rate; +} + +static int clk_pllm_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct tegra_clk_pll_freq_table cfg; + struct tegra_clk_pll *pll = to_clk_pll(hw); + unsigned long flags = 0; + int state, ret = 0; + u32 val; + + if (pll->lock) + spin_lock_irqsave(pll->lock, flags); + + state = clk_pll_is_enabled(hw); + if (state) { + if (rate != clk_get_rate(hw->clk)) { + pr_err("%s: Cannot change active PLLM\n", __func__); + ret = -EINVAL; + goto out; + } + goto out; + } + + ret = _pll_ramp_calc_pll(hw, &cfg, rate, parent_rate); + if (ret < 0) + goto out; + + cfg.p -= 1; + + val = readl_relaxed(pll->pmc + PMC_PLLM_WB0_OVERRIDE); + if (val & PMC_PLLP_WB0_OVERRIDE_PLLM_OVERRIDE) { + val = readl_relaxed(pll->pmc + PMC_PLLM_WB0_OVERRIDE_2); + val = cfg.p ? (val | PMC_PLLM_WB0_OVERRIDE_2_DIVP_MASK) : + (val & ~PMC_PLLM_WB0_OVERRIDE_2_DIVP_MASK); + writel_relaxed(val, pll->pmc + PMC_PLLM_WB0_OVERRIDE_2); + + val = readl_relaxed(pll->pmc + PMC_PLLM_WB0_OVERRIDE); + val &= ~(divn_mask(pll) | divm_mask(pll)); + val |= (cfg.m << pll->divm_shift) | (cfg.n << pll->divn_shift); + writel_relaxed(val, pll->pmc + PMC_PLLM_WB0_OVERRIDE); + } else + _update_pll_mnp(pll, &cfg); + + +out: + if (pll->lock) + spin_unlock_irqrestore(pll->lock, flags); + + return ret; +} + +static void _pllcx_strobe(struct tegra_clk_pll *pll) +{ + u32 val; + + val = pll_readl_misc(pll); + val |= PLLCX_MISC_STROBE; + pll_writel_misc(val, pll); + udelay(2); + + val &= ~PLLCX_MISC_STROBE; + pll_writel_misc(val, pll); +} + +static int clk_pllc_enable(struct clk_hw *hw) +{ + struct tegra_clk_pll *pll = to_clk_pll(hw); + u32 val; + int ret = 0; + unsigned long flags = 0; + + if (pll->lock) + spin_lock_irqsave(pll->lock, flags); + + _clk_pll_enable(hw); + udelay(2); + + val = pll_readl_misc(pll); + val &= ~PLLCX_MISC_RESET; + pll_writel_misc(val, pll); + udelay(2); + + _pllcx_strobe(pll); + + ret = clk_pll_wait_for_lock(pll); + + if (pll->lock) + spin_unlock_irqrestore(pll->lock, flags); + + return ret; +} + +static void _clk_pllc_disable(struct clk_hw *hw) +{ + struct tegra_clk_pll *pll = to_clk_pll(hw); + u32 val; + + _clk_pll_disable(hw); + + val = pll_readl_misc(pll); + val |= PLLCX_MISC_RESET; + pll_writel_misc(val, pll); + udelay(2); +} + +static void clk_pllc_disable(struct clk_hw *hw) +{ + struct tegra_clk_pll *pll = to_clk_pll(hw); + unsigned long flags = 0; + + if (pll->lock) + spin_lock_irqsave(pll->lock, flags); + + _clk_pllc_disable(hw); + + if (pll->lock) + spin_unlock_irqrestore(pll->lock, flags); +} + +static int _pllcx_update_dynamic_coef(struct tegra_clk_pll *pll, + unsigned long input_rate, u32 n) +{ + u32 val, n_threshold; + + switch (input_rate) { + case 12000000: + n_threshold = 70; + break; + case 13000000: + case 26000000: + n_threshold = 71; + break; + case 16800000: + n_threshold = 55; + break; + case 19200000: + n_threshold = 48; + break; + default: + pr_err("%s: Unexpected reference rate %lu\n", + __func__, input_rate); + return -EINVAL; + } + + val = pll_readl_misc(pll); + val &= ~(PLLCX_MISC_SDM_DIV_MASK | PLLCX_MISC_FILT_DIV_MASK); + val |= n <= n_threshold ? + PLLCX_MISC_DIV_LOW_RANGE : PLLCX_MISC_DIV_HIGH_RANGE; + pll_writel_misc(val, pll); + + return 0; +} + +static int clk_pllc_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct tegra_clk_pll_freq_table cfg; + struct tegra_clk_pll *pll = to_clk_pll(hw); + unsigned long flags = 0; + int state, ret = 0; + u32 val; + u16 old_m, old_n; + u8 old_p; + + if (pll->lock) + spin_lock_irqsave(pll->lock, flags); + + ret = _pll_ramp_calc_pll(hw, &cfg, rate, parent_rate); + if (ret < 0) + goto out; + + val = pll_readl_base(pll); + old_m = (val >> pll->divm_shift) & (divm_mask(pll)); + old_n = (val >> pll->divn_shift) & (divn_mask(pll)); + old_p = pllcx_p[(val >> pll->divp_shift) & (divp_mask(pll))]; + + if (cfg.m != old_m) { + WARN_ON(1); + goto out; + } + + if (old_n == cfg.n && old_p == cfg.p) + goto out; + + cfg.p -= 1; + + state = clk_pll_is_enabled(hw); + if (state) + _clk_pllc_disable(hw); + + ret = _pllcx_update_dynamic_coef(pll, parent_rate, cfg.n); + if (ret < 0) + goto out; + + _update_pll_mnp(pll, &cfg); + + if (state) + ret = clk_pllc_enable(hw); + +out: + if (pll->lock) + spin_unlock_irqrestore(pll->lock, flags); + + return ret; +} + +static long _pllre_calc_rate(struct tegra_clk_pll *pll, + struct tegra_clk_pll_freq_table *cfg, + unsigned long rate, unsigned long parent_rate) +{ + u16 m, n; + u64 output_rate = parent_rate; + + m = _pll_fixed_mdiv(pll->params, parent_rate); + n = rate * m / parent_rate; + + output_rate *= n; + do_div(output_rate, m); + + if (cfg) { + cfg->m = m; + cfg->n = n; + } + + return output_rate; +} +static int clk_pllre_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct tegra_clk_pll_freq_table cfg, old_cfg; + struct tegra_clk_pll *pll = to_clk_pll(hw); + unsigned long flags = 0; + int state, ret = 0; + + if (pll->lock) + spin_lock_irqsave(pll->lock, flags); + + _pllre_calc_rate(pll, &cfg, rate, parent_rate); + _get_pll_mnp(pll, &old_cfg); + cfg.p = old_cfg.p; + + if (cfg.m != old_cfg.m || cfg.n != old_cfg.n) { + state = clk_pll_is_enabled(hw); + if (state) + _clk_pll_disable(hw); + + _update_pll_mnp(pll, &cfg); + + if (state) { + _clk_pll_enable(hw); + ret = clk_pll_wait_for_lock(pll); + } + } + + if (pll->lock) + spin_unlock_irqrestore(pll->lock, flags); + + return ret; +} + +static unsigned long clk_pllre_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct tegra_clk_pll_freq_table cfg; + struct tegra_clk_pll *pll = to_clk_pll(hw); + u64 rate = parent_rate; + + _get_pll_mnp(pll, &cfg); + + rate *= cfg.n; + do_div(rate, cfg.m); + + return rate; +} + +static long clk_pllre_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *prate) +{ + struct tegra_clk_pll *pll = to_clk_pll(hw); + + return _pllre_calc_rate(pll, NULL, rate, *prate); +} + +static int clk_plle_tegra114_enable(struct clk_hw *hw) +{ + struct tegra_clk_pll *pll = to_clk_pll(hw); + struct tegra_clk_pll_freq_table sel; + u32 val; + int ret; + unsigned long flags = 0; + unsigned long input_rate = clk_get_rate(clk_get_parent(hw->clk)); + + if (_get_table_rate(hw, &sel, pll->fixed_rate, input_rate)) + return -EINVAL; + + if (pll->lock) + spin_lock_irqsave(pll->lock, flags); + + val = pll_readl_base(pll); + val &= ~BIT(29); /* Disable lock override */ + pll_writel_base(val, pll); + + val = pll_readl(pll->params->aux_reg, pll); + val |= PLLE_AUX_ENABLE_SWCTL; + val &= ~PLLE_AUX_SEQ_ENABLE; + pll_writel(val, pll->params->aux_reg, pll); + udelay(1); + + val = pll_readl_misc(pll); + val |= PLLE_MISC_LOCK_ENABLE; + val |= PLLE_MISC_IDDQ_SW_CTRL; + val &= ~PLLE_MISC_IDDQ_SW_VALUE; + val |= PLLE_MISC_PLLE_PTS; + val |= PLLE_MISC_VREG_BG_CTRL_MASK | PLLE_MISC_VREG_CTRL_MASK; + pll_writel_misc(val, pll); + udelay(5); + + val = pll_readl(PLLE_SS_CTRL, pll); + val |= PLLE_SS_DISABLE; + pll_writel(val, PLLE_SS_CTRL, pll); + + val = pll_readl_base(pll); + val &= ~(divm_mask(pll) | divn_mask(pll) | divp_mask(pll)); + val &= ~(PLLE_BASE_DIVCML_WIDTH << PLLE_BASE_DIVCML_SHIFT); + val |= sel.m << pll->divm_shift; + val |= sel.n << pll->divn_shift; + val |= sel.cpcon << PLLE_BASE_DIVCML_SHIFT; + pll_writel_base(val, pll); + udelay(1); + + _clk_pll_enable(hw); + ret = clk_pll_wait_for_lock(pll); + + if (ret < 0) + goto out; + + /* TODO: enable hw control of xusb brick pll */ + +out: + if (pll->lock) + spin_unlock_irqrestore(pll->lock, flags); + + return ret; +} + +static void clk_plle_tegra114_disable(struct clk_hw *hw) +{ + struct tegra_clk_pll *pll = to_clk_pll(hw); + unsigned long flags = 0; + u32 val; + + if (pll->lock) + spin_lock_irqsave(pll->lock, flags); + + _clk_pll_disable(hw); + + val = pll_readl_misc(pll); + val |= PLLE_MISC_IDDQ_SW_CTRL | PLLE_MISC_IDDQ_SW_VALUE; + pll_writel_misc(val, pll); + udelay(1); + + if (pll->lock) + spin_unlock_irqrestore(pll->lock, flags); +} +#endif + +static struct tegra_clk_pll *_tegra_init_pll(void __iomem *clk_base, + void __iomem *pmc, unsigned long fixed_rate, + struct tegra_clk_pll_params *pll_params, u32 pll_flags, + struct tegra_clk_pll_freq_table *freq_table, spinlock_t *lock) { struct tegra_clk_pll *pll; - struct clk *clk; - struct clk_init_data init; pll = kzalloc(sizeof(*pll), GFP_KERNEL); if (!pll) return ERR_PTR(-ENOMEM); - init.name = name; - init.ops = ops; - init.flags = flags; - init.parent_names = (parent_name ? &parent_name : NULL); - init.num_parents = (parent_name ? 1 : 0); - pll->clk_base = clk_base; pll->pmc = pmc; @@ -615,34 +1247,336 @@ static struct clk *_tegra_clk_register_pll(const char *name, pll->divm_shift = PLL_BASE_DIVM_SHIFT; pll->divm_width = PLL_BASE_DIVM_WIDTH; + return pll; +} + +static struct clk *_tegra_clk_register_pll(struct tegra_clk_pll *pll, + const char *name, const char *parent_name, unsigned long flags, + const struct clk_ops *ops) +{ + struct clk_init_data init; + + init.name = name; + init.ops = ops; + init.flags = flags; + init.parent_names = (parent_name ? &parent_name : NULL); + init.num_parents = (parent_name ? 1 : 0); + /* Data in .init is copied by clk_register(), so stack variable OK */ pll->hw.init = &init; - clk = clk_register(NULL, &pll->hw); - if (IS_ERR(clk)) - kfree(pll); - - return clk; + return clk_register(NULL, &pll->hw); } struct clk *tegra_clk_register_pll(const char *name, const char *parent_name, void __iomem *clk_base, void __iomem *pmc, unsigned long flags, unsigned long fixed_rate, - struct tegra_clk_pll_params *pll_params, u8 pll_flags, + struct tegra_clk_pll_params *pll_params, u32 pll_flags, struct tegra_clk_pll_freq_table *freq_table, spinlock_t *lock) { - return _tegra_clk_register_pll(name, parent_name, clk_base, pmc, - flags, fixed_rate, pll_params, pll_flags, freq_table, - lock, &tegra_clk_pll_ops); + struct tegra_clk_pll *pll; + struct clk *clk; + + pll_flags |= TEGRA_PLL_BYPASS; + pll_flags |= TEGRA_PLL_HAS_LOCK_ENABLE; + pll = _tegra_init_pll(clk_base, pmc, fixed_rate, pll_params, pll_flags, + freq_table, lock); + if (IS_ERR(pll)) + return ERR_CAST(pll); + + clk = _tegra_clk_register_pll(pll, name, parent_name, flags, + &tegra_clk_pll_ops); + if (IS_ERR(clk)) + kfree(pll); + + return clk; } struct clk *tegra_clk_register_plle(const char *name, const char *parent_name, void __iomem *clk_base, void __iomem *pmc, unsigned long flags, unsigned long fixed_rate, - struct tegra_clk_pll_params *pll_params, u8 pll_flags, + struct tegra_clk_pll_params *pll_params, u32 pll_flags, struct tegra_clk_pll_freq_table *freq_table, spinlock_t *lock) { - return _tegra_clk_register_pll(name, parent_name, clk_base, pmc, - flags, fixed_rate, pll_params, pll_flags, freq_table, - lock, &tegra_clk_plle_ops); + struct tegra_clk_pll *pll; + struct clk *clk; + + pll_flags |= TEGRA_PLL_LOCK_MISC | TEGRA_PLL_BYPASS; + pll_flags |= TEGRA_PLL_HAS_LOCK_ENABLE; + pll = _tegra_init_pll(clk_base, pmc, fixed_rate, pll_params, pll_flags, + freq_table, lock); + if (IS_ERR(pll)) + return ERR_CAST(pll); + + clk = _tegra_clk_register_pll(pll, name, parent_name, flags, + &tegra_clk_plle_ops); + if (IS_ERR(clk)) + kfree(pll); + + return clk; +} + +#ifdef CONFIG_ARCH_TEGRA_114_SOC +const struct clk_ops tegra_clk_pllxc_ops = { + .is_enabled = clk_pll_is_enabled, + .enable = clk_pll_iddq_enable, + .disable = clk_pll_iddq_disable, + .recalc_rate = clk_pll_recalc_rate, + .round_rate = clk_pll_ramp_round_rate, + .set_rate = clk_pllxc_set_rate, +}; + +const struct clk_ops tegra_clk_pllm_ops = { + .is_enabled = clk_pll_is_enabled, + .enable = clk_pll_iddq_enable, + .disable = clk_pll_iddq_disable, + .recalc_rate = clk_pll_recalc_rate, + .round_rate = clk_pll_ramp_round_rate, + .set_rate = clk_pllm_set_rate, +}; + +const struct clk_ops tegra_clk_pllc_ops = { + .is_enabled = clk_pll_is_enabled, + .enable = clk_pllc_enable, + .disable = clk_pllc_disable, + .recalc_rate = clk_pll_recalc_rate, + .round_rate = clk_pll_ramp_round_rate, + .set_rate = clk_pllc_set_rate, +}; + +const struct clk_ops tegra_clk_pllre_ops = { + .is_enabled = clk_pll_is_enabled, + .enable = clk_pll_iddq_enable, + .disable = clk_pll_iddq_disable, + .recalc_rate = clk_pllre_recalc_rate, + .round_rate = clk_pllre_round_rate, + .set_rate = clk_pllre_set_rate, +}; + +const struct clk_ops tegra_clk_plle_tegra114_ops = { + .is_enabled = clk_pll_is_enabled, + .enable = clk_plle_tegra114_enable, + .disable = clk_plle_tegra114_disable, + .recalc_rate = clk_pll_recalc_rate, +}; + + +struct clk *tegra_clk_register_pllxc(const char *name, const char *parent_name, + void __iomem *clk_base, void __iomem *pmc, + unsigned long flags, unsigned long fixed_rate, + struct tegra_clk_pll_params *pll_params, + u32 pll_flags, + struct tegra_clk_pll_freq_table *freq_table, + spinlock_t *lock) +{ + struct tegra_clk_pll *pll; + struct clk *clk; + + if (!pll_params->pdiv_tohw) + return ERR_PTR(-EINVAL); + + pll_flags |= TEGRA_PLL_HAS_LOCK_ENABLE; + pll = _tegra_init_pll(clk_base, pmc, fixed_rate, pll_params, pll_flags, + freq_table, lock); + if (IS_ERR(pll)) + return ERR_CAST(pll); + + clk = _tegra_clk_register_pll(pll, name, parent_name, flags, + &tegra_clk_pllxc_ops); + if (IS_ERR(clk)) + kfree(pll); + + return clk; +} + +struct clk *tegra_clk_register_pllre(const char *name, const char *parent_name, + void __iomem *clk_base, void __iomem *pmc, + unsigned long flags, unsigned long fixed_rate, + struct tegra_clk_pll_params *pll_params, + u32 pll_flags, + struct tegra_clk_pll_freq_table *freq_table, + spinlock_t *lock, unsigned long parent_rate) +{ + u32 val; + struct tegra_clk_pll *pll; + struct clk *clk; + + pll_flags |= TEGRA_PLL_HAS_LOCK_ENABLE; + pll = _tegra_init_pll(clk_base, pmc, fixed_rate, pll_params, pll_flags, + freq_table, lock); + if (IS_ERR(pll)) + return ERR_CAST(pll); + + /* program minimum rate by default */ + + val = pll_readl_base(pll); + if (val & PLL_BASE_ENABLE) + WARN_ON(val & pll_params->iddq_bit_idx); + else { + int m; + + m = _pll_fixed_mdiv(pll_params, parent_rate); + val = m << PLL_BASE_DIVM_SHIFT; + val |= (pll_params->vco_min / parent_rate) + << PLL_BASE_DIVN_SHIFT; + pll_writel_base(val, pll); + } + + /* disable lock override */ + + val = pll_readl_misc(pll); + val &= ~BIT(29); + pll_writel_misc(val, pll); + + pll_flags |= TEGRA_PLL_LOCK_MISC; + clk = _tegra_clk_register_pll(pll, name, parent_name, flags, + &tegra_clk_pllre_ops); + if (IS_ERR(clk)) + kfree(pll); + + return clk; +} + +struct clk *tegra_clk_register_pllm(const char *name, const char *parent_name, + void __iomem *clk_base, void __iomem *pmc, + unsigned long flags, unsigned long fixed_rate, + struct tegra_clk_pll_params *pll_params, + u32 pll_flags, + struct tegra_clk_pll_freq_table *freq_table, + spinlock_t *lock) +{ + struct tegra_clk_pll *pll; + struct clk *clk; + + if (!pll_params->pdiv_tohw) + return ERR_PTR(-EINVAL); + + pll_flags |= TEGRA_PLL_BYPASS; + pll_flags |= TEGRA_PLL_HAS_LOCK_ENABLE; + pll = _tegra_init_pll(clk_base, pmc, fixed_rate, pll_params, pll_flags, + freq_table, lock); + if (IS_ERR(pll)) + return ERR_CAST(pll); + + clk = _tegra_clk_register_pll(pll, name, parent_name, flags, + &tegra_clk_pllm_ops); + if (IS_ERR(clk)) + kfree(pll); + + return clk; +} + +struct clk *tegra_clk_register_pllc(const char *name, const char *parent_name, + void __iomem *clk_base, void __iomem *pmc, + unsigned long flags, unsigned long fixed_rate, + struct tegra_clk_pll_params *pll_params, + u32 pll_flags, + struct tegra_clk_pll_freq_table *freq_table, + spinlock_t *lock) +{ + struct clk *parent, *clk; + struct pdiv_map *p_tohw = pll_params->pdiv_tohw; + struct tegra_clk_pll *pll; + struct tegra_clk_pll_freq_table cfg; + unsigned long parent_rate; + + if (!p_tohw) + return ERR_PTR(-EINVAL); + + parent = __clk_lookup(parent_name); + if (IS_ERR(parent)) { + WARN(1, "parent clk %s of %s must be registered first\n", + name, parent_name); + return ERR_PTR(-EINVAL); + } + + pll_flags |= TEGRA_PLL_BYPASS; + pll = _tegra_init_pll(clk_base, pmc, fixed_rate, pll_params, pll_flags, + freq_table, lock); + if (IS_ERR(pll)) + return ERR_CAST(pll); + + parent_rate = __clk_get_rate(parent); + + /* + * Most of PLLC register fields are shadowed, and can not be read + * directly from PLL h/w. Hence, actual PLLC boot state is unknown. + * Initialize PLL to default state: disabled, reset; shadow registers + * loaded with default parameters; dividers are preset for half of + * minimum VCO rate (the latter assured that shadowed divider settings + * are within supported range). + */ + + cfg.m = _pll_fixed_mdiv(pll_params, parent_rate); + cfg.n = cfg.m * pll_params->vco_min / parent_rate; + + while (p_tohw->pdiv) { + if (p_tohw->pdiv == 2) { + cfg.p = p_tohw->hw_val; + break; + } + p_tohw++; + } + + if (!p_tohw->pdiv) { + WARN_ON(1); + return ERR_PTR(-EINVAL); + } + + pll_writel_base(0, pll); + _update_pll_mnp(pll, &cfg); + + pll_writel_misc(PLLCX_MISC_DEFAULT, pll); + pll_writel(PLLCX_MISC1_DEFAULT, pll_params->ext_misc_reg[0], pll); + pll_writel(PLLCX_MISC2_DEFAULT, pll_params->ext_misc_reg[1], pll); + pll_writel(PLLCX_MISC3_DEFAULT, pll_params->ext_misc_reg[2], pll); + + _pllcx_update_dynamic_coef(pll, parent_rate, cfg.n); + + clk = _tegra_clk_register_pll(pll, name, parent_name, flags, + &tegra_clk_pllc_ops); + if (IS_ERR(clk)) + kfree(pll); + + return clk; +} + +struct clk *tegra_clk_register_plle_tegra114(const char *name, + const char *parent_name, + void __iomem *clk_base, unsigned long flags, + unsigned long fixed_rate, + struct tegra_clk_pll_params *pll_params, + struct tegra_clk_pll_freq_table *freq_table, + spinlock_t *lock) +{ + struct tegra_clk_pll *pll; + struct clk *clk; + u32 val, val_aux; + + pll = _tegra_init_pll(clk_base, NULL, fixed_rate, pll_params, + TEGRA_PLL_HAS_LOCK_ENABLE, freq_table, lock); + if (IS_ERR(pll)) + return ERR_CAST(pll); + + /* ensure parent is set to pll_re_vco */ + + val = pll_readl_base(pll); + val_aux = pll_readl(pll_params->aux_reg, pll); + + if (val & PLL_BASE_ENABLE) { + if (!(val_aux & PLLE_AUX_PLLRE_SEL)) + WARN(1, "pll_e enabled with unsupported parent %s\n", + (val & PLLE_AUX_PLLP_SEL) ? "pllp_out0" : "pll_ref"); + } else { + val_aux |= PLLE_AUX_PLLRE_SEL; + pll_writel(val, pll_params->aux_reg, pll); + } + + clk = _tegra_clk_register_pll(pll, name, parent_name, flags, + &tegra_clk_plle_tegra114_ops); + if (IS_ERR(clk)) + kfree(pll); + + return clk; } +#endif diff --git a/drivers/clk/tegra/clk-tegra114.c b/drivers/clk/tegra/clk-tegra114.c new file mode 100644 index 0000000..d78e16e --- /dev/null +++ b/drivers/clk/tegra/clk-tegra114.c @@ -0,0 +1,2085 @@ +/* + * Copyright (c) 2012, 2013, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/io.h> +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/clkdev.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/delay.h> +#include <linux/clk/tegra.h> + +#include "clk.h" + +#define RST_DEVICES_L 0x004 +#define RST_DEVICES_H 0x008 +#define RST_DEVICES_U 0x00C +#define RST_DEVICES_V 0x358 +#define RST_DEVICES_W 0x35C +#define RST_DEVICES_X 0x28C +#define RST_DEVICES_SET_L 0x300 +#define RST_DEVICES_CLR_L 0x304 +#define RST_DEVICES_SET_H 0x308 +#define RST_DEVICES_CLR_H 0x30c +#define RST_DEVICES_SET_U 0x310 +#define RST_DEVICES_CLR_U 0x314 +#define RST_DEVICES_SET_V 0x430 +#define RST_DEVICES_CLR_V 0x434 +#define RST_DEVICES_SET_W 0x438 +#define RST_DEVICES_CLR_W 0x43c +#define RST_DEVICES_NUM 5 + +#define CLK_OUT_ENB_L 0x010 +#define CLK_OUT_ENB_H 0x014 +#define CLK_OUT_ENB_U 0x018 +#define CLK_OUT_ENB_V 0x360 +#define CLK_OUT_ENB_W 0x364 +#define CLK_OUT_ENB_X 0x280 +#define CLK_OUT_ENB_SET_L 0x320 +#define CLK_OUT_ENB_CLR_L 0x324 +#define CLK_OUT_ENB_SET_H 0x328 +#define CLK_OUT_ENB_CLR_H 0x32c +#define CLK_OUT_ENB_SET_U 0x330 +#define CLK_OUT_ENB_CLR_U 0x334 +#define CLK_OUT_ENB_SET_V 0x440 +#define CLK_OUT_ENB_CLR_V 0x444 +#define CLK_OUT_ENB_SET_W 0x448 +#define CLK_OUT_ENB_CLR_W 0x44c +#define CLK_OUT_ENB_SET_X 0x284 +#define CLK_OUT_ENB_CLR_X 0x288 +#define CLK_OUT_ENB_NUM 6 + +#define PLLC_BASE 0x80 +#define PLLC_MISC2 0x88 +#define PLLC_MISC 0x8c +#define PLLC2_BASE 0x4e8 +#define PLLC2_MISC 0x4ec +#define PLLC3_BASE 0x4fc +#define PLLC3_MISC 0x500 +#define PLLM_BASE 0x90 +#define PLLM_MISC 0x9c +#define PLLP_BASE 0xa0 +#define PLLP_MISC 0xac +#define PLLX_BASE 0xe0 +#define PLLX_MISC 0xe4 +#define PLLX_MISC2 0x514 +#define PLLX_MISC3 0x518 +#define PLLD_BASE 0xd0 +#define PLLD_MISC 0xdc +#define PLLD2_BASE 0x4b8 +#define PLLD2_MISC 0x4bc +#define PLLE_BASE 0xe8 +#define PLLE_MISC 0xec +#define PLLA_BASE 0xb0 +#define PLLA_MISC 0xbc +#define PLLU_BASE 0xc0 +#define PLLU_MISC 0xcc +#define PLLRE_BASE 0x4c4 +#define PLLRE_MISC 0x4c8 + +#define PLL_MISC_LOCK_ENABLE 18 +#define PLLC_MISC_LOCK_ENABLE 24 +#define PLLDU_MISC_LOCK_ENABLE 22 +#define PLLE_MISC_LOCK_ENABLE 9 +#define PLLRE_MISC_LOCK_ENABLE 30 + +#define PLLC_IDDQ_BIT 26 +#define PLLX_IDDQ_BIT 3 +#define PLLRE_IDDQ_BIT 16 + +#define PLL_BASE_LOCK BIT(27) +#define PLLE_MISC_LOCK BIT(11) +#define PLLRE_MISC_LOCK BIT(24) +#define PLLCX_BASE_LOCK (BIT(26)|BIT(27)) + +#define PLLE_AUX 0x48c +#define PLLC_OUT 0x84 +#define PLLM_OUT 0x94 +#define PLLP_OUTA 0xa4 +#define PLLP_OUTB 0xa8 +#define PLLA_OUT 0xb4 + +#define AUDIO_SYNC_CLK_I2S0 0x4a0 +#define AUDIO_SYNC_CLK_I2S1 0x4a4 +#define AUDIO_SYNC_CLK_I2S2 0x4a8 +#define AUDIO_SYNC_CLK_I2S3 0x4ac +#define AUDIO_SYNC_CLK_I2S4 0x4b0 +#define AUDIO_SYNC_CLK_SPDIF 0x4b4 + +#define AUDIO_SYNC_DOUBLER 0x49c + +#define PMC_CLK_OUT_CNTRL 0x1a8 +#define PMC_DPD_PADS_ORIDE 0x1c +#define PMC_DPD_PADS_ORIDE_BLINK_ENB 20 +#define PMC_CTRL 0 +#define PMC_CTRL_BLINK_ENB 7 + +#define OSC_CTRL 0x50 +#define OSC_CTRL_OSC_FREQ_SHIFT 28 +#define OSC_CTRL_PLL_REF_DIV_SHIFT 26 + +#define PLLXC_SW_MAX_P 6 + +#define CCLKG_BURST_POLICY 0x368 +#define CCLKLP_BURST_POLICY 0x370 +#define SCLK_BURST_POLICY 0x028 +#define SYSTEM_CLK_RATE 0x030 + +#define UTMIP_PLL_CFG2 0x488 +#define UTMIP_PLL_CFG2_STABLE_COUNT(x) (((x) & 0xffff) << 6) +#define UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(x) (((x) & 0x3f) << 18) +#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN BIT(0) +#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN BIT(2) +#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN BIT(4) + +#define UTMIP_PLL_CFG1 0x484 +#define UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 6) +#define UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(x) (((x) & 0xfff) << 0) +#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERUP BIT(17) +#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN BIT(16) +#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP BIT(15) +#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN BIT(14) +#define UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN BIT(12) + +#define UTMIPLL_HW_PWRDN_CFG0 0x52c +#define UTMIPLL_HW_PWRDN_CFG0_SEQ_START_STATE BIT(25) +#define UTMIPLL_HW_PWRDN_CFG0_SEQ_ENABLE BIT(24) +#define UTMIPLL_HW_PWRDN_CFG0_USE_LOCKDET BIT(6) +#define UTMIPLL_HW_PWRDN_CFG0_SEQ_RESET_INPUT_VALUE BIT(5) +#define UTMIPLL_HW_PWRDN_CFG0_SEQ_IN_SWCTL BIT(4) +#define UTMIPLL_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL BIT(2) +#define UTMIPLL_HW_PWRDN_CFG0_IDDQ_OVERRIDE BIT(1) +#define UTMIPLL_HW_PWRDN_CFG0_IDDQ_SWCTL BIT(0) + +#define CLK_SOURCE_I2S0 0x1d8 +#define CLK_SOURCE_I2S1 0x100 +#define CLK_SOURCE_I2S2 0x104 +#define CLK_SOURCE_NDFLASH 0x160 +#define CLK_SOURCE_I2S3 0x3bc +#define CLK_SOURCE_I2S4 0x3c0 +#define CLK_SOURCE_SPDIF_OUT 0x108 +#define CLK_SOURCE_SPDIF_IN 0x10c +#define CLK_SOURCE_PWM 0x110 +#define CLK_SOURCE_ADX 0x638 +#define CLK_SOURCE_AMX 0x63c +#define CLK_SOURCE_HDA 0x428 +#define CLK_SOURCE_HDA2CODEC_2X 0x3e4 +#define CLK_SOURCE_SBC1 0x134 +#define CLK_SOURCE_SBC2 0x118 +#define CLK_SOURCE_SBC3 0x11c +#define CLK_SOURCE_SBC4 0x1b4 +#define CLK_SOURCE_SBC5 0x3c8 +#define CLK_SOURCE_SBC6 0x3cc +#define CLK_SOURCE_SATA_OOB 0x420 +#define CLK_SOURCE_SATA 0x424 +#define CLK_SOURCE_NDSPEED 0x3f8 +#define CLK_SOURCE_VFIR 0x168 +#define CLK_SOURCE_SDMMC1 0x150 +#define CLK_SOURCE_SDMMC2 0x154 +#define CLK_SOURCE_SDMMC3 0x1bc +#define CLK_SOURCE_SDMMC4 0x164 +#define CLK_SOURCE_VDE 0x1c8 +#define CLK_SOURCE_CSITE 0x1d4 +#define CLK_SOURCE_LA 0x1f8 +#define CLK_SOURCE_TRACE 0x634 +#define CLK_SOURCE_OWR 0x1cc +#define CLK_SOURCE_NOR 0x1d0 +#define CLK_SOURCE_MIPI 0x174 +#define CLK_SOURCE_I2C1 0x124 +#define CLK_SOURCE_I2C2 0x198 +#define CLK_SOURCE_I2C3 0x1b8 +#define CLK_SOURCE_I2C4 0x3c4 +#define CLK_SOURCE_I2C5 0x128 +#define CLK_SOURCE_UARTA 0x178 +#define CLK_SOURCE_UARTB 0x17c +#define CLK_SOURCE_UARTC 0x1a0 +#define CLK_SOURCE_UARTD 0x1c0 +#define CLK_SOURCE_UARTE 0x1c4 +#define CLK_SOURCE_UARTA_DBG 0x178 +#define CLK_SOURCE_UARTB_DBG 0x17c +#define CLK_SOURCE_UARTC_DBG 0x1a0 +#define CLK_SOURCE_UARTD_DBG 0x1c0 +#define CLK_SOURCE_UARTE_DBG 0x1c4 +#define CLK_SOURCE_3D 0x158 +#define CLK_SOURCE_2D 0x15c +#define CLK_SOURCE_VI_SENSOR 0x1a8 +#define CLK_SOURCE_VI 0x148 +#define CLK_SOURCE_EPP 0x16c +#define CLK_SOURCE_MSENC 0x1f0 +#define CLK_SOURCE_TSEC 0x1f4 +#define CLK_SOURCE_HOST1X 0x180 +#define CLK_SOURCE_HDMI 0x18c +#define CLK_SOURCE_DISP1 0x138 +#define CLK_SOURCE_DISP2 0x13c +#define CLK_SOURCE_CILAB 0x614 +#define CLK_SOURCE_CILCD 0x618 +#define CLK_SOURCE_CILE 0x61c +#define CLK_SOURCE_DSIALP 0x620 +#define CLK_SOURCE_DSIBLP 0x624 +#define CLK_SOURCE_TSENSOR 0x3b8 +#define CLK_SOURCE_D_AUDIO 0x3d0 +#define CLK_SOURCE_DAM0 0x3d8 +#define CLK_SOURCE_DAM1 0x3dc +#define CLK_SOURCE_DAM2 0x3e0 +#define CLK_SOURCE_ACTMON 0x3e8 +#define CLK_SOURCE_EXTERN1 0x3ec +#define CLK_SOURCE_EXTERN2 0x3f0 +#define CLK_SOURCE_EXTERN3 0x3f4 +#define CLK_SOURCE_I2CSLOW 0x3fc +#define CLK_SOURCE_SE 0x42c +#define CLK_SOURCE_MSELECT 0x3b4 +#define CLK_SOURCE_SOC_THERM 0x644 +#define CLK_SOURCE_XUSB_HOST_SRC 0x600 +#define CLK_SOURCE_XUSB_FALCON_SRC 0x604 +#define CLK_SOURCE_XUSB_FS_SRC 0x608 +#define CLK_SOURCE_XUSB_SS_SRC 0x610 +#define CLK_SOURCE_XUSB_DEV_SRC 0x60c +#define CLK_SOURCE_EMC 0x19c + +static int periph_clk_enb_refcnt[CLK_OUT_ENB_NUM * 32]; + +static void __iomem *clk_base; +static void __iomem *pmc_base; + +static DEFINE_SPINLOCK(pll_d_lock); +static DEFINE_SPINLOCK(pll_d2_lock); +static DEFINE_SPINLOCK(pll_u_lock); +static DEFINE_SPINLOCK(pll_div_lock); +static DEFINE_SPINLOCK(pll_re_lock); +static DEFINE_SPINLOCK(clk_doubler_lock); +static DEFINE_SPINLOCK(clk_out_lock); +static DEFINE_SPINLOCK(sysrate_lock); + +static struct pdiv_map pllxc_p[] = { + { .pdiv = 1, .hw_val = 0 }, + { .pdiv = 2, .hw_val = 1 }, + { .pdiv = 3, .hw_val = 2 }, + { .pdiv = 4, .hw_val = 3 }, + { .pdiv = 5, .hw_val = 4 }, + { .pdiv = 6, .hw_val = 5 }, + { .pdiv = 8, .hw_val = 6 }, + { .pdiv = 10, .hw_val = 7 }, + { .pdiv = 12, .hw_val = 8 }, + { .pdiv = 16, .hw_val = 9 }, + { .pdiv = 12, .hw_val = 10 }, + { .pdiv = 16, .hw_val = 11 }, + { .pdiv = 20, .hw_val = 12 }, + { .pdiv = 24, .hw_val = 13 }, + { .pdiv = 32, .hw_val = 14 }, + { .pdiv = 0, .hw_val = 0 }, +}; + +static struct tegra_clk_pll_freq_table pll_c_freq_table[] = { + { 12000000, 624000000, 104, 0, 2}, + { 12000000, 600000000, 100, 0, 2}, + { 13000000, 600000000, 92, 0, 2}, /* actual: 598.0 MHz */ + { 16800000, 600000000, 71, 0, 2}, /* actual: 596.4 MHz */ + { 19200000, 600000000, 62, 0, 2}, /* actual: 595.2 MHz */ + { 26000000, 600000000, 92, 1, 2}, /* actual: 598.0 MHz */ + { 0, 0, 0, 0, 0, 0 }, +}; + +static struct tegra_clk_pll_params pll_c_params = { + .input_min = 12000000, + .input_max = 800000000, + .cf_min = 12000000, + .cf_max = 19200000, /* s/w policy, h/w capability 50 MHz */ + .vco_min = 600000000, + .vco_max = 1400000000, + .base_reg = PLLC_BASE, + .misc_reg = PLLC_MISC, + .lock_mask = PLL_BASE_LOCK, + .lock_enable_bit_idx = PLLC_MISC_LOCK_ENABLE, + .lock_delay = 300, + .iddq_reg = PLLC_MISC, + .iddq_bit_idx = PLLC_IDDQ_BIT, + .max_p = PLLXC_SW_MAX_P, + .dyn_ramp_reg = PLLC_MISC2, + .stepa_shift = 17, + .stepb_shift = 9, + .pdiv_tohw = pllxc_p, +}; + +static struct pdiv_map pllc_p[] = { + { .pdiv = 1, .hw_val = 0 }, + { .pdiv = 2, .hw_val = 1 }, + { .pdiv = 4, .hw_val = 3 }, + { .pdiv = 8, .hw_val = 5 }, + { .pdiv = 16, .hw_val = 7 }, + { .pdiv = 0, .hw_val = 0 }, +}; + +static struct tegra_clk_pll_freq_table pll_cx_freq_table[] = { + {12000000, 600000000, 100, 0, 2}, + {13000000, 600000000, 92, 0, 2}, /* actual: 598.0 MHz */ + {16800000, 600000000, 71, 0, 2}, /* actual: 596.4 MHz */ + {19200000, 600000000, 62, 0, 2}, /* actual: 595.2 MHz */ + {26000000, 600000000, 92, 1, 2}, /* actual: 598.0 MHz */ + {0, 0, 0, 0, 0, 0}, +}; + +static struct tegra_clk_pll_params pll_c2_params = { + .input_min = 12000000, + .input_max = 48000000, + .cf_min = 12000000, + .cf_max = 19200000, + .vco_min = 600000000, + .vco_max = 1200000000, + .base_reg = PLLC2_BASE, + .misc_reg = PLLC2_MISC, + .lock_mask = PLL_BASE_LOCK, + .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE, + .lock_delay = 300, + .pdiv_tohw = pllc_p, + .ext_misc_reg[0] = 0x4f0, + .ext_misc_reg[1] = 0x4f4, + .ext_misc_reg[2] = 0x4f8, +}; + +static struct tegra_clk_pll_params pll_c3_params = { + .input_min = 12000000, + .input_max = 48000000, + .cf_min = 12000000, + .cf_max = 19200000, + .vco_min = 600000000, + .vco_max = 1200000000, + .base_reg = PLLC3_BASE, + .misc_reg = PLLC3_MISC, + .lock_mask = PLL_BASE_LOCK, + .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE, + .lock_delay = 300, + .pdiv_tohw = pllc_p, + .ext_misc_reg[0] = 0x504, + .ext_misc_reg[1] = 0x508, + .ext_misc_reg[2] = 0x50c, +}; + +static struct pdiv_map pllm_p[] = { + { .pdiv = 1, .hw_val = 0 }, + { .pdiv = 2, .hw_val = 1 }, + { .pdiv = 0, .hw_val = 0 }, +}; + +static struct tegra_clk_pll_freq_table pll_m_freq_table[] = { + {12000000, 800000000, 66, 0, 1}, /* actual: 792.0 MHz */ + {13000000, 800000000, 61, 0, 1}, /* actual: 793.0 MHz */ + {16800000, 800000000, 47, 0, 1}, /* actual: 789.6 MHz */ + {19200000, 800000000, 41, 0, 1}, /* actual: 787.2 MHz */ + {26000000, 800000000, 61, 1, 1}, /* actual: 793.0 MHz */ + {0, 0, 0, 0, 0, 0}, +}; + +static struct tegra_clk_pll_params pll_m_params = { + .input_min = 12000000, + .input_max = 500000000, + .cf_min = 12000000, + .cf_max = 19200000, /* s/w policy, h/w capability 50 MHz */ + .vco_min = 400000000, + .vco_max = 1066000000, + .base_reg = PLLM_BASE, + .misc_reg = PLLM_MISC, + .lock_mask = PLL_BASE_LOCK, + .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE, + .lock_delay = 300, + .max_p = 2, + .pdiv_tohw = pllm_p, +}; + +static struct tegra_clk_pll_freq_table pll_p_freq_table[] = { + {12000000, 216000000, 432, 12, 1, 8}, + {13000000, 216000000, 432, 13, 1, 8}, + {16800000, 216000000, 360, 14, 1, 8}, + {19200000, 216000000, 360, 16, 1, 8}, + {26000000, 216000000, 432, 26, 1, 8}, + {0, 0, 0, 0, 0, 0}, +}; + +static struct tegra_clk_pll_params pll_p_params = { + .input_min = 2000000, + .input_max = 31000000, + .cf_min = 1000000, + .cf_max = 6000000, + .vco_min = 200000000, + .vco_max = 700000000, + .base_reg = PLLP_BASE, + .misc_reg = PLLP_MISC, + .lock_mask = PLL_BASE_LOCK, + .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE, + .lock_delay = 300, +}; + +static struct tegra_clk_pll_freq_table pll_a_freq_table[] = { + {9600000, 282240000, 147, 5, 0, 4}, + {9600000, 368640000, 192, 5, 0, 4}, + {9600000, 240000000, 200, 8, 0, 8}, + + {28800000, 282240000, 245, 25, 0, 8}, + {28800000, 368640000, 320, 25, 0, 8}, + {28800000, 240000000, 200, 24, 0, 8}, + {0, 0, 0, 0, 0, 0}, +}; + + +static struct tegra_clk_pll_params pll_a_params = { + .input_min = 2000000, + .input_max = 31000000, + .cf_min = 1000000, + .cf_max = 6000000, + .vco_min = 200000000, + .vco_max = 700000000, + .base_reg = PLLA_BASE, + .misc_reg = PLLA_MISC, + .lock_mask = PLL_BASE_LOCK, + .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE, + .lock_delay = 300, +}; + +static struct tegra_clk_pll_freq_table pll_d_freq_table[] = { + {12000000, 216000000, 864, 12, 2, 12}, + {13000000, 216000000, 864, 13, 2, 12}, + {16800000, 216000000, 720, 14, 2, 12}, + {19200000, 216000000, 720, 16, 2, 12}, + {26000000, 216000000, 864, 26, 2, 12}, + + {12000000, 594000000, 594, 12, 0, 12}, + {13000000, 594000000, 594, 13, 0, 12}, + {16800000, 594000000, 495, 14, 0, 12}, + {19200000, 594000000, 495, 16, 0, 12}, + {26000000, 594000000, 594, 26, 0, 12}, + + {12000000, 1000000000, 1000, 12, 0, 12}, + {13000000, 1000000000, 1000, 13, 0, 12}, + {19200000, 1000000000, 625, 12, 0, 12}, + {26000000, 1000000000, 1000, 26, 0, 12}, + + {0, 0, 0, 0, 0, 0}, +}; + +static struct tegra_clk_pll_params pll_d_params = { + .input_min = 2000000, + .input_max = 40000000, + .cf_min = 1000000, + .cf_max = 6000000, + .vco_min = 500000000, + .vco_max = 1000000000, + .base_reg = PLLD_BASE, + .misc_reg = PLLD_MISC, + .lock_mask = PLL_BASE_LOCK, + .lock_enable_bit_idx = PLLDU_MISC_LOCK_ENABLE, + .lock_delay = 1000, +}; + +static struct tegra_clk_pll_params pll_d2_params = { + .input_min = 2000000, + .input_max = 40000000, + .cf_min = 1000000, + .cf_max = 6000000, + .vco_min = 500000000, + .vco_max = 1000000000, + .base_reg = PLLD2_BASE, + .misc_reg = PLLD2_MISC, + .lock_mask = PLL_BASE_LOCK, + .lock_enable_bit_idx = PLLDU_MISC_LOCK_ENABLE, + .lock_delay = 1000, +}; + +static struct pdiv_map pllu_p[] = { + { .pdiv = 1, .hw_val = 1 }, + { .pdiv = 2, .hw_val = 0 }, + { .pdiv = 0, .hw_val = 0 }, +}; + +static struct tegra_clk_pll_freq_table pll_u_freq_table[] = { + {12000000, 480000000, 960, 12, 0, 12}, + {13000000, 480000000, 960, 13, 0, 12}, + {16800000, 480000000, 400, 7, 0, 5}, + {19200000, 480000000, 200, 4, 0, 3}, + {26000000, 480000000, 960, 26, 0, 12}, + {0, 0, 0, 0, 0, 0}, +}; + +static struct tegra_clk_pll_params pll_u_params = { + .input_min = 2000000, + .input_max = 40000000, + .cf_min = 1000000, + .cf_max = 6000000, + .vco_min = 480000000, + .vco_max = 960000000, + .base_reg = PLLU_BASE, + .misc_reg = PLLU_MISC, + .lock_mask = PLL_BASE_LOCK, + .lock_enable_bit_idx = PLLDU_MISC_LOCK_ENABLE, + .lock_delay = 1000, + .pdiv_tohw = pllu_p, +}; + +static struct tegra_clk_pll_freq_table pll_x_freq_table[] = { + /* 1 GHz */ + {12000000, 1000000000, 83, 0, 1}, /* actual: 996.0 MHz */ + {13000000, 1000000000, 76, 0, 1}, /* actual: 988.0 MHz */ + {16800000, 1000000000, 59, 0, 1}, /* actual: 991.2 MHz */ + {19200000, 1000000000, 52, 0, 1}, /* actual: 998.4 MHz */ + {26000000, 1000000000, 76, 1, 1}, /* actual: 988.0 MHz */ + + {0, 0, 0, 0, 0, 0}, +}; + +static struct tegra_clk_pll_params pll_x_params = { + .input_min = 12000000, + .input_max = 800000000, + .cf_min = 12000000, + .cf_max = 19200000, /* s/w policy, h/w capability 50 MHz */ + .vco_min = 700000000, + .vco_max = 2400000000U, + .base_reg = PLLX_BASE, + .misc_reg = PLLX_MISC, + .lock_mask = PLL_BASE_LOCK, + .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE, + .lock_delay = 300, + .iddq_reg = PLLX_MISC3, + .iddq_bit_idx = PLLX_IDDQ_BIT, + .max_p = PLLXC_SW_MAX_P, + .dyn_ramp_reg = PLLX_MISC2, + .stepa_shift = 16, + .stepb_shift = 24, + .pdiv_tohw = pllxc_p, +}; + +static struct tegra_clk_pll_freq_table pll_e_freq_table[] = { + /* PLLE special case: use cpcon field to store cml divider value */ + {336000000, 100000000, 100, 21, 16, 11}, + {312000000, 100000000, 200, 26, 24, 13}, + {0, 0, 0, 0, 0, 0}, +}; + +static struct tegra_clk_pll_params pll_e_params = { + .input_min = 12000000, + .input_max = 1000000000, + .cf_min = 12000000, + .cf_max = 75000000, + .vco_min = 1600000000, + .vco_max = 2400000000U, + .base_reg = PLLE_BASE, + .misc_reg = PLLE_MISC, + .aux_reg = PLLE_AUX, + .lock_mask = PLLE_MISC_LOCK, + .lock_enable_bit_idx = PLLE_MISC_LOCK_ENABLE, + .lock_delay = 300, +}; + +static struct tegra_clk_pll_params pll_re_vco_params = { + .input_min = 12000000, + .input_max = 1000000000, + .cf_min = 12000000, + .cf_max = 19200000, /* s/w policy, h/w capability 38 MHz */ + .vco_min = 300000000, + .vco_max = 600000000, + .base_reg = PLLRE_BASE, + .misc_reg = PLLRE_MISC, + .lock_mask = PLLRE_MISC_LOCK, + .lock_enable_bit_idx = PLLRE_MISC_LOCK_ENABLE, + .lock_delay = 300, + .iddq_reg = PLLRE_MISC, + .iddq_bit_idx = PLLRE_IDDQ_BIT, +}; + +/* Peripheral clock registers */ + +static struct tegra_clk_periph_regs periph_l_regs = { + .enb_reg = CLK_OUT_ENB_L, + .enb_set_reg = CLK_OUT_ENB_SET_L, + .enb_clr_reg = CLK_OUT_ENB_CLR_L, + .rst_reg = RST_DEVICES_L, + .rst_set_reg = RST_DEVICES_SET_L, + .rst_clr_reg = RST_DEVICES_CLR_L, +}; + +static struct tegra_clk_periph_regs periph_h_regs = { + .enb_reg = CLK_OUT_ENB_H, + .enb_set_reg = CLK_OUT_ENB_SET_H, + .enb_clr_reg = CLK_OUT_ENB_CLR_H, + .rst_reg = RST_DEVICES_H, + .rst_set_reg = RST_DEVICES_SET_H, + .rst_clr_reg = RST_DEVICES_CLR_H, +}; + +static struct tegra_clk_periph_regs periph_u_regs = { + .enb_reg = CLK_OUT_ENB_U, + .enb_set_reg = CLK_OUT_ENB_SET_U, + .enb_clr_reg = CLK_OUT_ENB_CLR_U, + .rst_reg = RST_DEVICES_U, + .rst_set_reg = RST_DEVICES_SET_U, + .rst_clr_reg = RST_DEVICES_CLR_U, +}; + +static struct tegra_clk_periph_regs periph_v_regs = { + .enb_reg = CLK_OUT_ENB_V, + .enb_set_reg = CLK_OUT_ENB_SET_V, + .enb_clr_reg = CLK_OUT_ENB_CLR_V, + .rst_reg = RST_DEVICES_V, + .rst_set_reg = RST_DEVICES_SET_V, + .rst_clr_reg = RST_DEVICES_CLR_V, +}; + +static struct tegra_clk_periph_regs periph_w_regs = { + .enb_reg = CLK_OUT_ENB_W, + .enb_set_reg = CLK_OUT_ENB_SET_W, + .enb_clr_reg = CLK_OUT_ENB_CLR_W, + .rst_reg = RST_DEVICES_W, + .rst_set_reg = RST_DEVICES_SET_W, + .rst_clr_reg = RST_DEVICES_CLR_W, +}; + +/* possible OSC frequencies in Hz */ +static unsigned long tegra114_input_freq[] = { + [0] = 13000000, + [1] = 16800000, + [4] = 19200000, + [5] = 38400000, + [8] = 12000000, + [9] = 48000000, + [12] = 260000000, +}; + +#define MASK(x) (BIT(x) - 1) + +#define TEGRA_INIT_DATA_MUX(_name, _con_id, _dev_id, _parents, _offset, \ + _clk_num, _regs, _gate_flags, _clk_id) \ + TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parents, _offset,\ + 30, MASK(2), 0, 0, 8, 1, 0, _regs, _clk_num, \ + periph_clk_enb_refcnt, _gate_flags, _clk_id, \ + _parents##_idx, 0) + +#define TEGRA_INIT_DATA_MUX_FLAGS(_name, _con_id, _dev_id, _parents, _offset,\ + _clk_num, _regs, _gate_flags, _clk_id, flags)\ + TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parents, _offset,\ + 30, MASK(2), 0, 0, 8, 1, 0, _regs, _clk_num, \ + periph_clk_enb_refcnt, _gate_flags, _clk_id, \ + _parents##_idx, flags) + +#define TEGRA_INIT_DATA_MUX8(_name, _con_id, _dev_id, _parents, _offset, \ + _clk_num, _regs, _gate_flags, _clk_id) \ + TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parents, _offset,\ + 29, MASK(3), 0, 0, 8, 1, 0, _regs, _clk_num, \ + periph_clk_enb_refcnt, _gate_flags, _clk_id, \ + _parents##_idx, 0) + +#define TEGRA_INIT_DATA_INT(_name, _con_id, _dev_id, _parents, _offset, \ + _clk_num, _regs, _gate_flags, _clk_id) \ + TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parents, _offset,\ + 30, MASK(2), 0, 0, 8, 1, TEGRA_DIVIDER_INT, _regs,\ + _clk_num, periph_clk_enb_refcnt, _gate_flags, \ + _clk_id, _parents##_idx, 0) + +#define TEGRA_INIT_DATA_INT_FLAGS(_name, _con_id, _dev_id, _parents, _offset,\ + _clk_num, _regs, _gate_flags, _clk_id, flags)\ + TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parents, _offset,\ + 30, MASK(2), 0, 0, 8, 1, TEGRA_DIVIDER_INT, _regs,\ + _clk_num, periph_clk_enb_refcnt, _gate_flags, \ + _clk_id, _parents##_idx, flags) + +#define TEGRA_INIT_DATA_INT8(_name, _con_id, _dev_id, _parents, _offset,\ + _clk_num, _regs, _gate_flags, _clk_id) \ + TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parents, _offset,\ + 29, MASK(3), 0, 0, 8, 1, TEGRA_DIVIDER_INT, _regs,\ + _clk_num, periph_clk_enb_refcnt, _gate_flags, \ + _clk_id, _parents##_idx, 0) + +#define TEGRA_INIT_DATA_UART(_name, _con_id, _dev_id, _parents, _offset,\ + _clk_num, _regs, _clk_id) \ + TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parents, _offset,\ + 30, MASK(2), 0, 0, 16, 1, TEGRA_DIVIDER_UART, _regs,\ + _clk_num, periph_clk_enb_refcnt, 0, _clk_id, \ + _parents##_idx, 0) + +#define TEGRA_INIT_DATA_I2C(_name, _con_id, _dev_id, _parents, _offset,\ + _clk_num, _regs, _clk_id) \ + TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parents, _offset,\ + 30, MASK(2), 0, 0, 16, 0, 0, _regs, _clk_num, \ + periph_clk_enb_refcnt, 0, _clk_id, _parents##_idx, 0) + +#define TEGRA_INIT_DATA_NODIV(_name, _con_id, _dev_id, _parents, _offset, \ + _mux_shift, _mux_mask, _clk_num, _regs, \ + _gate_flags, _clk_id) \ + TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parents, _offset,\ + _mux_shift, _mux_mask, 0, 0, 0, 0, 0, _regs, \ + _clk_num, periph_clk_enb_refcnt, _gate_flags, \ + _clk_id, _parents##_idx, 0) + +#define TEGRA_INIT_DATA_XUSB(_name, _con_id, _dev_id, _parents, _offset, \ + _clk_num, _regs, _gate_flags, _clk_id) \ + TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parents, _offset, \ + 29, MASK(3), 0, 0, 8, 1, TEGRA_DIVIDER_INT, _regs, \ + _clk_num, periph_clk_enb_refcnt, _gate_flags, \ + _clk_id, _parents##_idx, 0) + +#define TEGRA_INIT_DATA_AUDIO(_name, _con_id, _dev_id, _offset, _clk_num,\ + _regs, _gate_flags, _clk_id) \ + TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, mux_d_audio_clk, \ + _offset, 16, 0xE01F, 0, 0, 8, 1, 0, _regs, _clk_num, \ + periph_clk_enb_refcnt, _gate_flags , _clk_id, \ + mux_d_audio_clk_idx, 0) + +enum tegra114_clk { + rtc = 4, timer = 5, uarta = 6, sdmmc2 = 9, i2s1 = 11, i2c1 = 12, + ndflash = 13, sdmmc1 = 14, sdmmc4 = 15, pwm = 17, i2s2 = 18, epp = 19, + gr_2d = 21, usbd = 22, isp = 23, gr_3d = 24, disp2 = 26, disp1 = 27, + host1x = 28, vcp = 29, i2s0 = 30, apbdma = 34, kbc = 36, kfuse = 40, + sbc1 = 41, nor = 42, sbc2 = 44, sbc3 = 46, i2c5 = 47, dsia = 48, + mipi = 50, hdmi = 51, csi = 52, i2c2 = 54, uartc = 55, mipi_cal = 56, + emc, usb2, usb3, vde = 61, bsea = 62, bsev = 63, uartd = 65, + i2c3 = 67, sbc4 = 68, sdmmc3 = 69, owr = 71, csite = 73, + la = 76, trace = 77, soc_therm = 78, dtv = 79, ndspeed = 80, + i2cslow = 81, dsib = 82, tsec = 83, xusb_host = 89, msenc = 91, + csus = 92, mselect = 99, tsensor = 100, i2s3 = 101, i2s4 = 102, + i2c4 = 103, sbc5 = 104, sbc6 = 105, d_audio, apbif = 107, dam0, dam1, + dam2, hda2codec_2x = 111, audio0_2x = 113, audio1_2x, audio2_2x, + audio3_2x, audio4_2x, spdif_2x, actmon = 119, extern1 = 120, + extern2 = 121, extern3 = 122, hda = 125, se = 127, hda2hdmi = 128, + cilab = 144, cilcd = 145, cile = 146, dsialp = 147, dsiblp = 148, + dds = 150, dp2 = 152, amx = 153, adx = 154, xusb_ss = 156, uartb = 192, + vfir, spdif_in, spdif_out, vi, vi_sensor, fuse, fuse_burn, clk_32k, + clk_m, clk_m_div2, clk_m_div4, pll_ref, pll_c, pll_c_out1, pll_c2, + pll_c3, pll_m, pll_m_out1, pll_p, pll_p_out1, pll_p_out2, pll_p_out3, + pll_p_out4, pll_a, pll_a_out0, pll_d, pll_d_out0, pll_d2, pll_d2_out0, + pll_u, pll_u_480M, pll_u_60M, pll_u_48M, pll_u_12M, pll_x, pll_x_out0, + pll_re_vco, pll_re_out, pll_e_out0, spdif_in_sync, i2s0_sync, + i2s1_sync, i2s2_sync, i2s3_sync, i2s4_sync, vimclk_sync, audio0, + audio1, audio2, audio3, audio4, spdif, clk_out_1, clk_out_2, clk_out_3, + blink, xusb_host_src = 252, xusb_falcon_src, xusb_fs_src, xusb_ss_src, + xusb_dev_src, xusb_dev, xusb_hs_src, sclk, hclk, pclk, cclk_g, cclk_lp, + + /* Mux clocks */ + + audio0_mux = 300, audio1_mux, audio2_mux, audio3_mux, audio4_mux, + spdif_mux, clk_out_1_mux, clk_out_2_mux, clk_out_3_mux, dsia_mux, + dsib_mux, clk_max, +}; + +struct utmi_clk_param { + /* Oscillator Frequency in KHz */ + u32 osc_frequency; + /* UTMIP PLL Enable Delay Count */ + u8 enable_delay_count; + /* UTMIP PLL Stable count */ + u8 stable_count; + /* UTMIP PLL Active delay count */ + u8 active_delay_count; + /* UTMIP PLL Xtal frequency count */ + u8 xtal_freq_count; +}; + +static const struct utmi_clk_param utmi_parameters[] = { + {.osc_frequency = 13000000, .enable_delay_count = 0x02, + .stable_count = 0x33, .active_delay_count = 0x05, + .xtal_freq_count = 0x7F}, + {.osc_frequency = 19200000, .enable_delay_count = 0x03, + .stable_count = 0x4B, .active_delay_count = 0x06, + .xtal_freq_count = 0xBB}, + {.osc_frequency = 12000000, .enable_delay_count = 0x02, + .stable_count = 0x2F, .active_delay_count = 0x04, + .xtal_freq_count = 0x76}, + {.osc_frequency = 26000000, .enable_delay_count = 0x04, + .stable_count = 0x66, .active_delay_count = 0x09, + .xtal_freq_count = 0xFE}, + {.osc_frequency = 16800000, .enable_delay_count = 0x03, + .stable_count = 0x41, .active_delay_count = 0x0A, + .xtal_freq_count = 0xA4}, +}; + +/* peripheral mux definitions */ + +#define MUX_I2S_SPDIF(_id) \ +static const char *mux_pllaout0_##_id##_2x_pllp_clkm[] = { "pll_a_out0", \ + #_id, "pll_p",\ + "clk_m"}; +MUX_I2S_SPDIF(audio0) +MUX_I2S_SPDIF(audio1) +MUX_I2S_SPDIF(audio2) +MUX_I2S_SPDIF(audio3) +MUX_I2S_SPDIF(audio4) +MUX_I2S_SPDIF(audio) + +#define mux_pllaout0_audio0_2x_pllp_clkm_idx NULL +#define mux_pllaout0_audio1_2x_pllp_clkm_idx NULL +#define mux_pllaout0_audio2_2x_pllp_clkm_idx NULL +#define mux_pllaout0_audio3_2x_pllp_clkm_idx NULL +#define mux_pllaout0_audio4_2x_pllp_clkm_idx NULL +#define mux_pllaout0_audio_2x_pllp_clkm_idx NULL + +static const char *mux_pllp_pllc_pllm_clkm[] = { + "pll_p", "pll_c", "pll_m", "clk_m" +}; +#define mux_pllp_pllc_pllm_clkm_idx NULL + +static const char *mux_pllp_pllc_pllm[] = { "pll_p", "pll_c", "pll_m" }; +#define mux_pllp_pllc_pllm_idx NULL + +static const char *mux_pllp_pllc_clk32_clkm[] = { + "pll_p", "pll_c", "clk_32k", "clk_m" +}; +#define mux_pllp_pllc_clk32_clkm_idx NULL + +static const char *mux_plla_pllc_pllp_clkm[] = { + "pll_a_out0", "pll_c", "pll_p", "clk_m" +}; +#define mux_plla_pllc_pllp_clkm_idx mux_pllp_pllc_pllm_clkm_idx + +static const char *mux_pllp_pllc2_c_c3_pllm_clkm[] = { + "pll_p", "pll_c2", "pll_c", "pll_c3", "pll_m", "clk_m" +}; +static u32 mux_pllp_pllc2_c_c3_pllm_clkm_idx[] = { + [0] = 0, [1] = 1, [2] = 2, [3] = 3, [4] = 4, [5] = 6, +}; + +static const char *mux_pllp_clkm[] = { + "pll_p", "clk_m" +}; +static u32 mux_pllp_clkm_idx[] = { + [0] = 0, [1] = 3, +}; + +static const char *mux_pllm_pllc2_c_c3_pllp_plla[] = { + "pll_m", "pll_c2", "pll_c", "pll_c3", "pll_p", "pll_a_out0" +}; +#define mux_pllm_pllc2_c_c3_pllp_plla_idx mux_pllp_pllc2_c_c3_pllm_clkm_idx + +static const char *mux_pllp_pllm_plld_plla_pllc_plld2_clkm[] = { + "pll_p", "pll_m", "pll_d_out0", "pll_a_out0", "pll_c", + "pll_d2_out0", "clk_m" +}; +#define mux_pllp_pllm_plld_plla_pllc_plld2_clkm_idx NULL + +static const char *mux_pllm_pllc_pllp_plla[] = { + "pll_m", "pll_c", "pll_p", "pll_a_out0" +}; +#define mux_pllm_pllc_pllp_plla_idx mux_pllp_pllc_pllm_clkm_idx + +static const char *mux_pllp_pllc_clkm[] = { + "pll_p", "pll_c", "pll_m" +}; +static u32 mux_pllp_pllc_clkm_idx[] = { + [0] = 0, [1] = 1, [2] = 3, +}; + +static const char *mux_pllp_pllc_clkm_clk32[] = { + "pll_p", "pll_c", "clk_m", "clk_32k" +}; +#define mux_pllp_pllc_clkm_clk32_idx NULL + +static const char *mux_plla_clk32_pllp_clkm_plle[] = { + "pll_a_out0", "clk_32k", "pll_p", "clk_m", "pll_e_out0" +}; +#define mux_plla_clk32_pllp_clkm_plle_idx NULL + +static const char *mux_clkm_pllp_pllc_pllre[] = { + "clk_m", "pll_p", "pll_c", "pll_re_out" +}; +static u32 mux_clkm_pllp_pllc_pllre_idx[] = { + [0] = 0, [1] = 1, [2] = 3, [3] = 5, +}; + +static const char *mux_clkm_48M_pllp_480M[] = { + "clk_m", "pll_u_48M", "pll_p", "pll_u_480M" +}; +#define mux_clkm_48M_pllp_480M_idx NULL + +static const char *mux_clkm_pllre_clk32_480M_pllc_ref[] = { + "clk_m", "pll_re_out", "clk_32k", "pll_u_480M", "pll_c", "pll_ref" +}; +static u32 mux_clkm_pllre_clk32_480M_pllc_ref_idx[] = { + [0] = 0, [1] = 1, [2] = 3, [3] = 3, [4] = 4, [5] = 7, +}; + +static const char *mux_plld_out0_plld2_out0[] = { + "pll_d_out0", "pll_d2_out0", +}; +#define mux_plld_out0_plld2_out0_idx NULL + +static const char *mux_d_audio_clk[] = { + "pll_a_out0", "pll_p", "clk_m", "spdif_in_sync", "i2s0_sync", + "i2s1_sync", "i2s2_sync", "i2s3_sync", "i2s4_sync", "vimclk_sync", +}; +static u32 mux_d_audio_clk_idx[] = { + [0] = 0, [1] = 0x8000, [2] = 0xc000, [3] = 0xE000, [4] = 0xE001, + [5] = 0xE002, [6] = 0xE003, [7] = 0xE004, [8] = 0xE005, [9] = 0xE007, +}; + +static const char *mux_pllmcp_clkm[] = { + "pll_m_out0", "pll_c_out0", "pll_p_out0", "clk_m", "pll_m_ud", +}; + +static const struct clk_div_table pll_re_div_table[] = { + { .val = 0, .div = 1 }, + { .val = 1, .div = 2 }, + { .val = 2, .div = 3 }, + { .val = 3, .div = 4 }, + { .val = 4, .div = 5 }, + { .val = 5, .div = 6 }, + { .val = 0, .div = 0 }, +}; + +static struct clk *clks[clk_max]; +static struct clk_onecell_data clk_data; + +static unsigned long osc_freq; +static unsigned long pll_ref_freq; + +static int __init tegra114_osc_clk_init(void __iomem *clk_base) +{ + struct clk *clk; + u32 val, pll_ref_div; + + val = readl_relaxed(clk_base + OSC_CTRL); + + osc_freq = tegra114_input_freq[val >> OSC_CTRL_OSC_FREQ_SHIFT]; + if (!osc_freq) { + WARN_ON(1); + return -EINVAL; + } + + /* clk_m */ + clk = clk_register_fixed_rate(NULL, "clk_m", NULL, CLK_IS_ROOT, + osc_freq); + clk_register_clkdev(clk, "clk_m", NULL); + clks[clk_m] = clk; + + /* pll_ref */ + val = (val >> OSC_CTRL_PLL_REF_DIV_SHIFT) & 3; + pll_ref_div = 1 << val; + clk = clk_register_fixed_factor(NULL, "pll_ref", "clk_m", + CLK_SET_RATE_PARENT, 1, pll_ref_div); + clk_register_clkdev(clk, "pll_ref", NULL); + clks[pll_ref] = clk; + + pll_ref_freq = osc_freq / pll_ref_div; + + return 0; +} + +static void __init tegra114_fixed_clk_init(void __iomem *clk_base) +{ + struct clk *clk; + + /* clk_32k */ + clk = clk_register_fixed_rate(NULL, "clk_32k", NULL, CLK_IS_ROOT, + 32768); + clk_register_clkdev(clk, "clk_32k", NULL); + clks[clk_32k] = clk; + + /* clk_m_div2 */ + clk = clk_register_fixed_factor(NULL, "clk_m_div2", "clk_m", + CLK_SET_RATE_PARENT, 1, 2); + clk_register_clkdev(clk, "clk_m_div2", NULL); + clks[clk_m_div2] = clk; + + /* clk_m_div4 */ + clk = clk_register_fixed_factor(NULL, "clk_m_div4", "clk_m", + CLK_SET_RATE_PARENT, 1, 4); + clk_register_clkdev(clk, "clk_m_div4", NULL); + clks[clk_m_div4] = clk; + +} + +static __init void tegra114_utmi_param_configure(void __iomem *clk_base) +{ + u32 reg; + int i; + + for (i = 0; i < ARRAY_SIZE(utmi_parameters); i++) { + if (osc_freq == utmi_parameters[i].osc_frequency) + break; + } + + if (i >= ARRAY_SIZE(utmi_parameters)) { + pr_err("%s: Unexpected oscillator freq %lu\n", __func__, + osc_freq); + return; + } + + reg = readl_relaxed(clk_base + UTMIP_PLL_CFG2); + + /* Program UTMIP PLL stable and active counts */ + /* [FIXME] arclk_rst.h says WRONG! This should be 1ms -> 0x50 Check! */ + reg &= ~UTMIP_PLL_CFG2_STABLE_COUNT(~0); + reg |= UTMIP_PLL_CFG2_STABLE_COUNT(utmi_parameters[i].stable_count); + + reg &= ~UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(~0); + + reg |= UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(utmi_parameters[i]. + active_delay_count); + + /* Remove power downs from UTMIP PLL control bits */ + reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN; + reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN; + reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN; + + writel_relaxed(reg, clk_base + UTMIP_PLL_CFG2); + + /* Program UTMIP PLL delay and oscillator frequency counts */ + reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1); + reg &= ~UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(~0); + + reg |= UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(utmi_parameters[i]. + enable_delay_count); + + reg &= ~UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(~0); + reg |= UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(utmi_parameters[i]. + xtal_freq_count); + + /* Remove power downs from UTMIP PLL control bits */ + reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN; + reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN; + reg &= ~UTMIP_PLL_CFG1_FORCE_PLLU_POWERUP; + reg &= ~UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN; + writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1); + + /* Setup HW control of UTMIPLL */ + reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0); + reg |= UTMIPLL_HW_PWRDN_CFG0_USE_LOCKDET; + reg &= ~UTMIPLL_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL; + reg |= UTMIPLL_HW_PWRDN_CFG0_SEQ_START_STATE; + writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0); + + reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1); + reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP; + reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN; + writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1); + + udelay(1); + + /* Setup SW override of UTMIPLL assuming USB2.0 + ports are assigned to USB2 */ + reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0); + reg |= UTMIPLL_HW_PWRDN_CFG0_IDDQ_SWCTL; + reg &= ~UTMIPLL_HW_PWRDN_CFG0_IDDQ_OVERRIDE; + writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0); + + udelay(1); + + /* Enable HW control UTMIPLL */ + reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0); + reg |= UTMIPLL_HW_PWRDN_CFG0_SEQ_ENABLE; + writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0); +} + +static void __init _clip_vco_min(struct tegra_clk_pll_params *pll_params) +{ + pll_params->vco_min = + DIV_ROUND_UP(pll_params->vco_min, pll_ref_freq) * pll_ref_freq; +} + +static int __init _setup_dynamic_ramp(struct tegra_clk_pll_params *pll_params, + void __iomem *clk_base) +{ + u32 val; + u32 step_a, step_b; + + switch (pll_ref_freq) { + case 12000000: + case 13000000: + case 26000000: + step_a = 0x2B; + step_b = 0x0B; + break; + case 16800000: + step_a = 0x1A; + step_b = 0x09; + break; + case 19200000: + step_a = 0x12; + step_b = 0x08; + break; + default: + pr_err("%s: Unexpected reference rate %lu\n", + __func__, pll_ref_freq); + WARN_ON(1); + return -EINVAL; + } + + val = step_a << pll_params->stepa_shift; + val |= step_b << pll_params->stepb_shift; + writel_relaxed(val, clk_base + pll_params->dyn_ramp_reg); + + return 0; +} + +static void __init _init_iddq(struct tegra_clk_pll_params *pll_params, + void __iomem *clk_base) +{ + u32 val, val_iddq; + + val = readl_relaxed(clk_base + pll_params->base_reg); + val_iddq = readl_relaxed(clk_base + pll_params->iddq_reg); + + if (val & BIT(30)) + WARN_ON(val_iddq & BIT(pll_params->iddq_bit_idx)); + else { + val_iddq |= BIT(pll_params->iddq_bit_idx); + writel_relaxed(val_iddq, clk_base + pll_params->iddq_reg); + } +} + +static void __init tegra114_pll_init(void __iomem *clk_base, + void __iomem *pmc) +{ + u32 val; + struct clk *clk; + + /* PLLC */ + _clip_vco_min(&pll_c_params); + if (_setup_dynamic_ramp(&pll_c_params, clk_base) >= 0) { + _init_iddq(&pll_c_params, clk_base); + clk = tegra_clk_register_pllxc("pll_c", "pll_ref", clk_base, + pmc, 0, 0, &pll_c_params, TEGRA_PLL_USE_LOCK, + pll_c_freq_table, NULL); + clk_register_clkdev(clk, "pll_c", NULL); + clks[pll_c] = clk; + + /* PLLC_OUT1 */ + clk = tegra_clk_register_divider("pll_c_out1_div", "pll_c", + clk_base + PLLC_OUT, 0, TEGRA_DIVIDER_ROUND_UP, + 8, 8, 1, NULL); + clk = tegra_clk_register_pll_out("pll_c_out1", "pll_c_out1_div", + clk_base + PLLC_OUT, 1, 0, + CLK_SET_RATE_PARENT, 0, NULL); + clk_register_clkdev(clk, "pll_c_out1", NULL); + clks[pll_c_out1] = clk; + } + + /* PLLC2 */ + _clip_vco_min(&pll_c2_params); + clk = tegra_clk_register_pllc("pll_c2", "pll_ref", clk_base, pmc, 0, 0, + &pll_c2_params, TEGRA_PLL_USE_LOCK, + pll_cx_freq_table, NULL); + clk_register_clkdev(clk, "pll_c2", NULL); + clks[pll_c2] = clk; + + /* PLLC3 */ + _clip_vco_min(&pll_c3_params); + clk = tegra_clk_register_pllc("pll_c3", "pll_ref", clk_base, pmc, 0, 0, + &pll_c3_params, TEGRA_PLL_USE_LOCK, + pll_cx_freq_table, NULL); + clk_register_clkdev(clk, "pll_c3", NULL); + clks[pll_c3] = clk; + + /* PLLP */ + clk = tegra_clk_register_pll("pll_p", "pll_ref", clk_base, pmc, 0, + 408000000, &pll_p_params, + TEGRA_PLL_FIXED | TEGRA_PLL_USE_LOCK, + pll_p_freq_table, NULL); + clk_register_clkdev(clk, "pll_p", NULL); + clks[pll_p] = clk; + + /* PLLP_OUT1 */ + clk = tegra_clk_register_divider("pll_p_out1_div", "pll_p", + clk_base + PLLP_OUTA, 0, TEGRA_DIVIDER_FIXED | + TEGRA_DIVIDER_ROUND_UP, 8, 8, 1, &pll_div_lock); + clk = tegra_clk_register_pll_out("pll_p_out1", "pll_p_out1_div", + clk_base + PLLP_OUTA, 1, 0, + CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0, + &pll_div_lock); + clk_register_clkdev(clk, "pll_p_out1", NULL); + clks[pll_p_out1] = clk; + + /* PLLP_OUT2 */ + clk = tegra_clk_register_divider("pll_p_out2_div", "pll_p", + clk_base + PLLP_OUTA, 0, TEGRA_DIVIDER_FIXED | + TEGRA_DIVIDER_ROUND_UP, 24, 8, 1, + &pll_div_lock); + clk = tegra_clk_register_pll_out("pll_p_out2", "pll_p_out2_div", + clk_base + PLLP_OUTA, 17, 16, + CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0, + &pll_div_lock); + clk_register_clkdev(clk, "pll_p_out2", NULL); + clks[pll_p_out2] = clk; + + /* PLLP_OUT3 */ + clk = tegra_clk_register_divider("pll_p_out3_div", "pll_p", + clk_base + PLLP_OUTB, 0, TEGRA_DIVIDER_FIXED | + TEGRA_DIVIDER_ROUND_UP, 8, 8, 1, &pll_div_lock); + clk = tegra_clk_register_pll_out("pll_p_out3", "pll_p_out3_div", + clk_base + PLLP_OUTB, 1, 0, + CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0, + &pll_div_lock); + clk_register_clkdev(clk, "pll_p_out3", NULL); + clks[pll_p_out3] = clk; + + /* PLLP_OUT4 */ + clk = tegra_clk_register_divider("pll_p_out4_div", "pll_p", + clk_base + PLLP_OUTB, 0, TEGRA_DIVIDER_FIXED | + TEGRA_DIVIDER_ROUND_UP, 24, 8, 1, + &pll_div_lock); + clk = tegra_clk_register_pll_out("pll_p_out4", "pll_p_out4_div", + clk_base + PLLP_OUTB, 17, 16, + CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0, + &pll_div_lock); + clk_register_clkdev(clk, "pll_p_out4", NULL); + clks[pll_p_out4] = clk; + + /* PLLM */ + _clip_vco_min(&pll_m_params); + clk = tegra_clk_register_pllm("pll_m", "pll_ref", clk_base, pmc, + CLK_IGNORE_UNUSED | CLK_SET_RATE_GATE, 0, + &pll_m_params, TEGRA_PLL_USE_LOCK, + pll_m_freq_table, NULL); + clk_register_clkdev(clk, "pll_m", NULL); + clks[pll_m] = clk; + + /* PLLM_OUT1 */ + clk = tegra_clk_register_divider("pll_m_out1_div", "pll_m", + clk_base + PLLM_OUT, 0, TEGRA_DIVIDER_ROUND_UP, + 8, 8, 1, NULL); + clk = tegra_clk_register_pll_out("pll_m_out1", "pll_m_out1_div", + clk_base + PLLM_OUT, 1, 0, CLK_IGNORE_UNUSED | + CLK_SET_RATE_PARENT, 0, NULL); + clk_register_clkdev(clk, "pll_m_out1", NULL); + clks[pll_m_out1] = clk; + + /* PLLM_UD */ + clk = clk_register_fixed_factor(NULL, "pll_m_ud", "pll_m", + CLK_SET_RATE_PARENT, 1, 1); + + /* PLLX */ + _clip_vco_min(&pll_x_params); + if (_setup_dynamic_ramp(&pll_x_params, clk_base) >= 0) { + _init_iddq(&pll_x_params, clk_base); + clk = tegra_clk_register_pllxc("pll_x", "pll_ref", clk_base, + pmc, CLK_IGNORE_UNUSED, 0, &pll_x_params, + TEGRA_PLL_USE_LOCK, pll_x_freq_table, NULL); + clk_register_clkdev(clk, "pll_x", NULL); + clks[pll_x] = clk; + } + + /* PLLX_OUT0 */ + clk = clk_register_fixed_factor(NULL, "pll_x_out0", "pll_x", + CLK_SET_RATE_PARENT, 1, 2); + clk_register_clkdev(clk, "pll_x_out0", NULL); + clks[pll_x_out0] = clk; + + /* PLLU */ + val = readl(clk_base + pll_u_params.base_reg); + val &= ~BIT(24); /* disable PLLU_OVERRIDE */ + writel(val, clk_base + pll_u_params.base_reg); + + clk = tegra_clk_register_pll("pll_u", "pll_ref", clk_base, pmc, 0, + 0, &pll_u_params, TEGRA_PLLU | + TEGRA_PLL_HAS_CPCON | TEGRA_PLL_SET_LFCON | + TEGRA_PLL_USE_LOCK, pll_u_freq_table, &pll_u_lock); + clk_register_clkdev(clk, "pll_u", NULL); + clks[pll_u] = clk; + + tegra114_utmi_param_configure(clk_base); + + /* PLLU_480M */ + clk = clk_register_gate(NULL, "pll_u_480M", "pll_u", + CLK_SET_RATE_PARENT, clk_base + PLLU_BASE, + 22, 0, &pll_u_lock); + clk_register_clkdev(clk, "pll_u_480M", NULL); + clks[pll_u_480M] = clk; + + /* PLLU_60M */ + clk = clk_register_fixed_factor(NULL, "pll_u_60M", "pll_u", + CLK_SET_RATE_PARENT, 1, 8); + clk_register_clkdev(clk, "pll_u_60M", NULL); + clks[pll_u_60M] = clk; + + /* PLLU_48M */ + clk = clk_register_fixed_factor(NULL, "pll_u_48M", "pll_u", + CLK_SET_RATE_PARENT, 1, 10); + clk_register_clkdev(clk, "pll_u_48M", NULL); + clks[pll_u_48M] = clk; + + /* PLLU_12M */ + clk = clk_register_fixed_factor(NULL, "pll_u_12M", "pll_u", + CLK_SET_RATE_PARENT, 1, 40); + clk_register_clkdev(clk, "pll_u_12M", NULL); + clks[pll_u_12M] = clk; + + /* PLLD */ + clk = tegra_clk_register_pll("pll_d", "pll_ref", clk_base, pmc, 0, + 0, &pll_d_params, + TEGRA_PLL_HAS_CPCON | TEGRA_PLL_SET_LFCON | + TEGRA_PLL_USE_LOCK, pll_d_freq_table, &pll_d_lock); + clk_register_clkdev(clk, "pll_d", NULL); + clks[pll_d] = clk; + + /* PLLD_OUT0 */ + clk = clk_register_fixed_factor(NULL, "pll_d_out0", "pll_d", + CLK_SET_RATE_PARENT, 1, 2); + clk_register_clkdev(clk, "pll_d_out0", NULL); + clks[pll_d_out0] = clk; + + /* PLLD2 */ + clk = tegra_clk_register_pll("pll_d2", "pll_ref", clk_base, pmc, 0, + 0, &pll_d2_params, + TEGRA_PLL_HAS_CPCON | TEGRA_PLL_SET_LFCON | + TEGRA_PLL_USE_LOCK, pll_d_freq_table, &pll_d2_lock); + clk_register_clkdev(clk, "pll_d2", NULL); + clks[pll_d2] = clk; + + /* PLLD2_OUT0 */ + clk = clk_register_fixed_factor(NULL, "pll_d2_out0", "pll_d2", + CLK_SET_RATE_PARENT, 1, 2); + clk_register_clkdev(clk, "pll_d2_out0", NULL); + clks[pll_d2_out0] = clk; + + /* PLLA */ + clk = tegra_clk_register_pll("pll_a", "pll_p_out1", clk_base, pmc, 0, + 0, &pll_a_params, TEGRA_PLL_HAS_CPCON | + TEGRA_PLL_USE_LOCK, pll_a_freq_table, NULL); + clk_register_clkdev(clk, "pll_a", NULL); + clks[pll_a] = clk; + + /* PLLA_OUT0 */ + clk = tegra_clk_register_divider("pll_a_out0_div", "pll_a", + clk_base + PLLA_OUT, 0, TEGRA_DIVIDER_ROUND_UP, + 8, 8, 1, NULL); + clk = tegra_clk_register_pll_out("pll_a_out0", "pll_a_out0_div", + clk_base + PLLA_OUT, 1, 0, CLK_IGNORE_UNUSED | + CLK_SET_RATE_PARENT, 0, NULL); + clk_register_clkdev(clk, "pll_a_out0", NULL); + clks[pll_a_out0] = clk; + + /* PLLRE */ + _clip_vco_min(&pll_re_vco_params); + clk = tegra_clk_register_pllre("pll_re_vco", "pll_ref", clk_base, pmc, + 0, 0, &pll_re_vco_params, TEGRA_PLL_USE_LOCK, + NULL, &pll_re_lock, pll_ref_freq); + clk_register_clkdev(clk, "pll_re_vco", NULL); + clks[pll_re_vco] = clk; + + clk = clk_register_divider_table(NULL, "pll_re_out", "pll_re_vco", 0, + clk_base + PLLRE_BASE, 16, 4, 0, + pll_re_div_table, &pll_re_lock); + clk_register_clkdev(clk, "pll_re_out", NULL); + clks[pll_re_out] = clk; + + /* PLLE */ + clk = tegra_clk_register_plle_tegra114("pll_e_out0", "pll_re_vco", + clk_base, 0, 100000000, &pll_e_params, + pll_e_freq_table, NULL); + clk_register_clkdev(clk, "pll_e_out0", NULL); + clks[pll_e_out0] = clk; +} + +static const char *mux_audio_sync_clk[] = { "spdif_in_sync", "i2s0_sync", + "i2s1_sync", "i2s2_sync", "i2s3_sync", "i2s4_sync", "vimclk_sync", +}; + +static const char *clk_out1_parents[] = { "clk_m", "clk_m_div2", + "clk_m_div4", "extern1", +}; + +static const char *clk_out2_parents[] = { "clk_m", "clk_m_div2", + "clk_m_div4", "extern2", +}; + +static const char *clk_out3_parents[] = { "clk_m", "clk_m_div2", + "clk_m_div4", "extern3", +}; + +static void __init tegra114_audio_clk_init(void __iomem *clk_base) +{ + struct clk *clk; + + /* spdif_in_sync */ + clk = tegra_clk_register_sync_source("spdif_in_sync", 24000000, + 24000000); + clk_register_clkdev(clk, "spdif_in_sync", NULL); + clks[spdif_in_sync] = clk; + + /* i2s0_sync */ + clk = tegra_clk_register_sync_source("i2s0_sync", 24000000, 24000000); + clk_register_clkdev(clk, "i2s0_sync", NULL); + clks[i2s0_sync] = clk; + + /* i2s1_sync */ + clk = tegra_clk_register_sync_source("i2s1_sync", 24000000, 24000000); + clk_register_clkdev(clk, "i2s1_sync", NULL); + clks[i2s1_sync] = clk; + + /* i2s2_sync */ + clk = tegra_clk_register_sync_source("i2s2_sync", 24000000, 24000000); + clk_register_clkdev(clk, "i2s2_sync", NULL); + clks[i2s2_sync] = clk; + + /* i2s3_sync */ + clk = tegra_clk_register_sync_source("i2s3_sync", 24000000, 24000000); + clk_register_clkdev(clk, "i2s3_sync", NULL); + clks[i2s3_sync] = clk; + + /* i2s4_sync */ + clk = tegra_clk_register_sync_source("i2s4_sync", 24000000, 24000000); + clk_register_clkdev(clk, "i2s4_sync", NULL); + clks[i2s4_sync] = clk; + + /* vimclk_sync */ + clk = tegra_clk_register_sync_source("vimclk_sync", 24000000, 24000000); + clk_register_clkdev(clk, "vimclk_sync", NULL); + clks[vimclk_sync] = clk; + + /* audio0 */ + clk = clk_register_mux(NULL, "audio0_mux", mux_audio_sync_clk, + ARRAY_SIZE(mux_audio_sync_clk), 0, + clk_base + AUDIO_SYNC_CLK_I2S0, 0, 3, 0, + NULL); + clks[audio0_mux] = clk; + clk = clk_register_gate(NULL, "audio0", "audio0_mux", 0, + clk_base + AUDIO_SYNC_CLK_I2S0, 4, + CLK_GATE_SET_TO_DISABLE, NULL); + clk_register_clkdev(clk, "audio0", NULL); + clks[audio0] = clk; + + /* audio1 */ + clk = clk_register_mux(NULL, "audio1_mux", mux_audio_sync_clk, + ARRAY_SIZE(mux_audio_sync_clk), 0, + clk_base + AUDIO_SYNC_CLK_I2S1, 0, 3, 0, + NULL); + clks[audio1_mux] = clk; + clk = clk_register_gate(NULL, "audio1", "audio1_mux", 0, + clk_base + AUDIO_SYNC_CLK_I2S1, 4, + CLK_GATE_SET_TO_DISABLE, NULL); + clk_register_clkdev(clk, "audio1", NULL); + clks[audio1] = clk; + + /* audio2 */ + clk = clk_register_mux(NULL, "audio2_mux", mux_audio_sync_clk, + ARRAY_SIZE(mux_audio_sync_clk), 0, + clk_base + AUDIO_SYNC_CLK_I2S2, 0, 3, 0, + NULL); + clks[audio2_mux] = clk; + clk = clk_register_gate(NULL, "audio2", "audio2_mux", 0, + clk_base + AUDIO_SYNC_CLK_I2S2, 4, + CLK_GATE_SET_TO_DISABLE, NULL); + clk_register_clkdev(clk, "audio2", NULL); + clks[audio2] = clk; + + /* audio3 */ + clk = clk_register_mux(NULL, "audio3_mux", mux_audio_sync_clk, + ARRAY_SIZE(mux_audio_sync_clk), 0, + clk_base + AUDIO_SYNC_CLK_I2S3, 0, 3, 0, + NULL); + clks[audio3_mux] = clk; + clk = clk_register_gate(NULL, "audio3", "audio3_mux", 0, + clk_base + AUDIO_SYNC_CLK_I2S3, 4, + CLK_GATE_SET_TO_DISABLE, NULL); + clk_register_clkdev(clk, "audio3", NULL); + clks[audio3] = clk; + + /* audio4 */ + clk = clk_register_mux(NULL, "audio4_mux", mux_audio_sync_clk, + ARRAY_SIZE(mux_audio_sync_clk), 0, + clk_base + AUDIO_SYNC_CLK_I2S4, 0, 3, 0, + NULL); + clks[audio4_mux] = clk; + clk = clk_register_gate(NULL, "audio4", "audio4_mux", 0, + clk_base + AUDIO_SYNC_CLK_I2S4, 4, + CLK_GATE_SET_TO_DISABLE, NULL); + clk_register_clkdev(clk, "audio4", NULL); + clks[audio4] = clk; + + /* spdif */ + clk = clk_register_mux(NULL, "spdif_mux", mux_audio_sync_clk, + ARRAY_SIZE(mux_audio_sync_clk), 0, + clk_base + AUDIO_SYNC_CLK_SPDIF, 0, 3, 0, + NULL); + clks[spdif_mux] = clk; + clk = clk_register_gate(NULL, "spdif", "spdif_mux", 0, + clk_base + AUDIO_SYNC_CLK_SPDIF, 4, + CLK_GATE_SET_TO_DISABLE, NULL); + clk_register_clkdev(clk, "spdif", NULL); + clks[spdif] = clk; + + /* audio0_2x */ + clk = clk_register_fixed_factor(NULL, "audio0_doubler", "audio0", + CLK_SET_RATE_PARENT, 2, 1); + clk = tegra_clk_register_divider("audio0_div", "audio0_doubler", + clk_base + AUDIO_SYNC_DOUBLER, 0, 0, 24, 1, + 0, &clk_doubler_lock); + clk = tegra_clk_register_periph_gate("audio0_2x", "audio0_div", + TEGRA_PERIPH_NO_RESET, clk_base, + CLK_SET_RATE_PARENT, 113, &periph_v_regs, + periph_clk_enb_refcnt); + clk_register_clkdev(clk, "audio0_2x", NULL); + clks[audio0_2x] = clk; + + /* audio1_2x */ + clk = clk_register_fixed_factor(NULL, "audio1_doubler", "audio1", + CLK_SET_RATE_PARENT, 2, 1); + clk = tegra_clk_register_divider("audio1_div", "audio1_doubler", + clk_base + AUDIO_SYNC_DOUBLER, 0, 0, 25, 1, + 0, &clk_doubler_lock); + clk = tegra_clk_register_periph_gate("audio1_2x", "audio1_div", + TEGRA_PERIPH_NO_RESET, clk_base, + CLK_SET_RATE_PARENT, 114, &periph_v_regs, + periph_clk_enb_refcnt); + clk_register_clkdev(clk, "audio1_2x", NULL); + clks[audio1_2x] = clk; + + /* audio2_2x */ + clk = clk_register_fixed_factor(NULL, "audio2_doubler", "audio2", + CLK_SET_RATE_PARENT, 2, 1); + clk = tegra_clk_register_divider("audio2_div", "audio2_doubler", + clk_base + AUDIO_SYNC_DOUBLER, 0, 0, 26, 1, + 0, &clk_doubler_lock); + clk = tegra_clk_register_periph_gate("audio2_2x", "audio2_div", + TEGRA_PERIPH_NO_RESET, clk_base, + CLK_SET_RATE_PARENT, 115, &periph_v_regs, + periph_clk_enb_refcnt); + clk_register_clkdev(clk, "audio2_2x", NULL); + clks[audio2_2x] = clk; + + /* audio3_2x */ + clk = clk_register_fixed_factor(NULL, "audio3_doubler", "audio3", + CLK_SET_RATE_PARENT, 2, 1); + clk = tegra_clk_register_divider("audio3_div", "audio3_doubler", + clk_base + AUDIO_SYNC_DOUBLER, 0, 0, 27, 1, + 0, &clk_doubler_lock); + clk = tegra_clk_register_periph_gate("audio3_2x", "audio3_div", + TEGRA_PERIPH_NO_RESET, clk_base, + CLK_SET_RATE_PARENT, 116, &periph_v_regs, + periph_clk_enb_refcnt); + clk_register_clkdev(clk, "audio3_2x", NULL); + clks[audio3_2x] = clk; + + /* audio4_2x */ + clk = clk_register_fixed_factor(NULL, "audio4_doubler", "audio4", + CLK_SET_RATE_PARENT, 2, 1); + clk = tegra_clk_register_divider("audio4_div", "audio4_doubler", + clk_base + AUDIO_SYNC_DOUBLER, 0, 0, 28, 1, + 0, &clk_doubler_lock); + clk = tegra_clk_register_periph_gate("audio4_2x", "audio4_div", + TEGRA_PERIPH_NO_RESET, clk_base, + CLK_SET_RATE_PARENT, 117, &periph_v_regs, + periph_clk_enb_refcnt); + clk_register_clkdev(clk, "audio4_2x", NULL); + clks[audio4_2x] = clk; + + /* spdif_2x */ + clk = clk_register_fixed_factor(NULL, "spdif_doubler", "spdif", + CLK_SET_RATE_PARENT, 2, 1); + clk = tegra_clk_register_divider("spdif_div", "spdif_doubler", + clk_base + AUDIO_SYNC_DOUBLER, 0, 0, 29, 1, + 0, &clk_doubler_lock); + clk = tegra_clk_register_periph_gate("spdif_2x", "spdif_div", + TEGRA_PERIPH_NO_RESET, clk_base, + CLK_SET_RATE_PARENT, 118, + &periph_v_regs, periph_clk_enb_refcnt); + clk_register_clkdev(clk, "spdif_2x", NULL); + clks[spdif_2x] = clk; +} + +static void __init tegra114_pmc_clk_init(void __iomem *pmc_base) +{ + struct clk *clk; + + /* clk_out_1 */ + clk = clk_register_mux(NULL, "clk_out_1_mux", clk_out1_parents, + ARRAY_SIZE(clk_out1_parents), 0, + pmc_base + PMC_CLK_OUT_CNTRL, 6, 3, 0, + &clk_out_lock); + clks[clk_out_1_mux] = clk; + clk = clk_register_gate(NULL, "clk_out_1", "clk_out_1_mux", 0, + pmc_base + PMC_CLK_OUT_CNTRL, 2, 0, + &clk_out_lock); + clk_register_clkdev(clk, "extern1", "clk_out_1"); + clks[clk_out_1] = clk; + + /* clk_out_2 */ + clk = clk_register_mux(NULL, "clk_out_2_mux", clk_out2_parents, + ARRAY_SIZE(clk_out1_parents), 0, + pmc_base + PMC_CLK_OUT_CNTRL, 14, 3, 0, + &clk_out_lock); + clks[clk_out_2_mux] = clk; + clk = clk_register_gate(NULL, "clk_out_2", "clk_out_2_mux", 0, + pmc_base + PMC_CLK_OUT_CNTRL, 10, 0, + &clk_out_lock); + clk_register_clkdev(clk, "extern2", "clk_out_2"); + clks[clk_out_2] = clk; + + /* clk_out_3 */ + clk = clk_register_mux(NULL, "clk_out_3_mux", clk_out3_parents, + ARRAY_SIZE(clk_out1_parents), 0, + pmc_base + PMC_CLK_OUT_CNTRL, 22, 3, 0, + &clk_out_lock); + clks[clk_out_3_mux] = clk; + clk = clk_register_gate(NULL, "clk_out_3", "clk_out_3_mux", 0, + pmc_base + PMC_CLK_OUT_CNTRL, 18, 0, + &clk_out_lock); + clk_register_clkdev(clk, "extern3", "clk_out_3"); + clks[clk_out_3] = clk; + + /* blink */ + clk = clk_register_gate(NULL, "blink_override", "clk_32k", 0, + pmc_base + PMC_DPD_PADS_ORIDE, + PMC_DPD_PADS_ORIDE_BLINK_ENB, 0, NULL); + clk = clk_register_gate(NULL, "blink", "blink_override", 0, + pmc_base + PMC_CTRL, + PMC_CTRL_BLINK_ENB, 0, NULL); + clk_register_clkdev(clk, "blink", NULL); + clks[blink] = clk; + +} + +static const char *sclk_parents[] = { "clk_m", "pll_c_out1", "pll_p_out4", + "pll_p_out3", "pll_p_out2", "unused", + "clk_32k", "pll_m_out1" }; + +static const char *cclk_g_parents[] = { "clk_m", "pll_c", "clk_32k", "pll_m", + "pll_p", "pll_p_out4", "unused", + "unused", "pll_x" }; + +static const char *cclk_lp_parents[] = { "clk_m", "pll_c", "clk_32k", "pll_m", + "pll_p", "pll_p_out4", "unused", + "unused", "pll_x", "pll_x_out0" }; + +static void __init tegra114_super_clk_init(void __iomem *clk_base) +{ + struct clk *clk; + + /* CCLKG */ + clk = tegra_clk_register_super_mux("cclk_g", cclk_g_parents, + ARRAY_SIZE(cclk_g_parents), + CLK_SET_RATE_PARENT, + clk_base + CCLKG_BURST_POLICY, + 0, 4, 0, 0, NULL); + clk_register_clkdev(clk, "cclk_g", NULL); + clks[cclk_g] = clk; + + /* CCLKLP */ + clk = tegra_clk_register_super_mux("cclk_lp", cclk_lp_parents, + ARRAY_SIZE(cclk_lp_parents), + CLK_SET_RATE_PARENT, + clk_base + CCLKLP_BURST_POLICY, + 0, 4, 8, 9, NULL); + clk_register_clkdev(clk, "cclk_lp", NULL); + clks[cclk_lp] = clk; + + /* SCLK */ + clk = tegra_clk_register_super_mux("sclk", sclk_parents, + ARRAY_SIZE(sclk_parents), + CLK_SET_RATE_PARENT, + clk_base + SCLK_BURST_POLICY, + 0, 4, 0, 0, NULL); + clk_register_clkdev(clk, "sclk", NULL); + clks[sclk] = clk; + + /* HCLK */ + clk = clk_register_divider(NULL, "hclk_div", "sclk", 0, + clk_base + SYSTEM_CLK_RATE, 4, 2, 0, + &sysrate_lock); + clk = clk_register_gate(NULL, "hclk", "hclk_div", CLK_SET_RATE_PARENT | + CLK_IGNORE_UNUSED, clk_base + SYSTEM_CLK_RATE, + 7, CLK_GATE_SET_TO_DISABLE, &sysrate_lock); + clk_register_clkdev(clk, "hclk", NULL); + clks[hclk] = clk; + + /* PCLK */ + clk = clk_register_divider(NULL, "pclk_div", "hclk", 0, + clk_base + SYSTEM_CLK_RATE, 0, 2, 0, + &sysrate_lock); + clk = clk_register_gate(NULL, "pclk", "pclk_div", CLK_SET_RATE_PARENT | + CLK_IGNORE_UNUSED, clk_base + SYSTEM_CLK_RATE, + 3, CLK_GATE_SET_TO_DISABLE, &sysrate_lock); + clk_register_clkdev(clk, "pclk", NULL); + clks[pclk] = clk; +} + +static struct tegra_periph_init_data tegra_periph_clk_list[] = { + TEGRA_INIT_DATA_MUX("i2s0", NULL, "tegra30-i2s.0", mux_pllaout0_audio0_2x_pllp_clkm, CLK_SOURCE_I2S0, 30, &periph_l_regs, TEGRA_PERIPH_ON_APB, i2s0), + TEGRA_INIT_DATA_MUX("i2s1", NULL, "tegra30-i2s.1", mux_pllaout0_audio1_2x_pllp_clkm, CLK_SOURCE_I2S1, 11, &periph_l_regs, TEGRA_PERIPH_ON_APB, i2s1), + TEGRA_INIT_DATA_MUX("i2s2", NULL, "tegra30-i2s.2", mux_pllaout0_audio2_2x_pllp_clkm, CLK_SOURCE_I2S2, 18, &periph_l_regs, TEGRA_PERIPH_ON_APB, i2s2), + TEGRA_INIT_DATA_MUX("i2s3", NULL, "tegra30-i2s.3", mux_pllaout0_audio3_2x_pllp_clkm, CLK_SOURCE_I2S3, 101, &periph_v_regs, TEGRA_PERIPH_ON_APB, i2s3), + TEGRA_INIT_DATA_MUX("i2s4", NULL, "tegra30-i2s.4", mux_pllaout0_audio4_2x_pllp_clkm, CLK_SOURCE_I2S4, 102, &periph_v_regs, TEGRA_PERIPH_ON_APB, i2s4), + TEGRA_INIT_DATA_MUX("spdif_out", "spdif_out", "tegra30-spdif", mux_pllaout0_audio_2x_pllp_clkm, CLK_SOURCE_SPDIF_OUT, 10, &periph_l_regs, TEGRA_PERIPH_ON_APB, spdif_out), + TEGRA_INIT_DATA_MUX("spdif_in", "spdif_in", "tegra30-spdif", mux_pllp_pllc_pllm, CLK_SOURCE_SPDIF_IN, 10, &periph_l_regs, TEGRA_PERIPH_ON_APB, spdif_in), + TEGRA_INIT_DATA_MUX("pwm", NULL, "pwm", mux_pllp_pllc_clk32_clkm, CLK_SOURCE_PWM, 17, &periph_l_regs, TEGRA_PERIPH_ON_APB, pwm), + TEGRA_INIT_DATA_MUX("adx", NULL, "adx", mux_plla_pllc_pllp_clkm, CLK_SOURCE_ADX, 154, &periph_w_regs, TEGRA_PERIPH_ON_APB, adx), + TEGRA_INIT_DATA_MUX("amx", NULL, "amx", mux_plla_pllc_pllp_clkm, CLK_SOURCE_AMX, 153, &periph_w_regs, TEGRA_PERIPH_ON_APB, amx), + TEGRA_INIT_DATA_MUX("hda", "hda", "tegra30-hda", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_HDA, 125, &periph_v_regs, TEGRA_PERIPH_ON_APB, hda), + TEGRA_INIT_DATA_MUX("hda2codec_2x", "hda2codec", "tegra30-hda", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_HDA2CODEC_2X, 111, &periph_v_regs, TEGRA_PERIPH_ON_APB, hda2codec_2x), + TEGRA_INIT_DATA_MUX("sbc1", NULL, "tegra11-spi.0", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SBC1, 41, &periph_h_regs, TEGRA_PERIPH_ON_APB, sbc1), + TEGRA_INIT_DATA_MUX("sbc2", NULL, "tegra11-spi.1", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SBC2, 44, &periph_h_regs, TEGRA_PERIPH_ON_APB, sbc2), + TEGRA_INIT_DATA_MUX("sbc3", NULL, "tegra11-spi.2", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SBC3, 46, &periph_h_regs, TEGRA_PERIPH_ON_APB, sbc3), + TEGRA_INIT_DATA_MUX("sbc4", NULL, "tegra11-spi.3", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SBC4, 68, &periph_u_regs, TEGRA_PERIPH_ON_APB, sbc4), + TEGRA_INIT_DATA_MUX("sbc5", NULL, "tegra11-spi.4", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SBC5, 104, &periph_v_regs, TEGRA_PERIPH_ON_APB, sbc5), + TEGRA_INIT_DATA_MUX("sbc6", NULL, "tegra11-spi.5", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SBC6, 105, &periph_v_regs, TEGRA_PERIPH_ON_APB, sbc6), + TEGRA_INIT_DATA_MUX8("ndflash", NULL, "tegra_nand", mux_pllp_pllc2_c_c3_pllm_clkm, CLK_SOURCE_NDFLASH, 13, &periph_u_regs, TEGRA_PERIPH_ON_APB, ndspeed), + TEGRA_INIT_DATA_MUX8("ndspeed", NULL, "tegra_nand_speed", mux_pllp_pllc2_c_c3_pllm_clkm, CLK_SOURCE_NDSPEED, 80, &periph_u_regs, TEGRA_PERIPH_ON_APB, ndspeed), + TEGRA_INIT_DATA_MUX("vfir", NULL, "vfir", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_VFIR, 7, &periph_l_regs, TEGRA_PERIPH_ON_APB, vfir), + TEGRA_INIT_DATA_MUX("sdmmc1", NULL, "sdhci-tegra.0", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SDMMC1, 14, &periph_l_regs, 0, sdmmc1), + TEGRA_INIT_DATA_MUX("sdmmc2", NULL, "sdhci-tegra.1", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SDMMC2, 9, &periph_l_regs, 0, sdmmc2), + TEGRA_INIT_DATA_MUX("sdmmc3", NULL, "sdhci-tegra.2", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SDMMC3, 69, &periph_u_regs, 0, sdmmc3), + TEGRA_INIT_DATA_MUX("sdmmc4", NULL, "sdhci-tegra.3", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SDMMC4, 15, &periph_l_regs, 0, sdmmc4), + TEGRA_INIT_DATA_INT("vde", NULL, "vde", mux_pllp_pllc2_c_c3_pllm_clkm, CLK_SOURCE_VDE, 61, &periph_h_regs, 0, vde), + TEGRA_INIT_DATA_MUX_FLAGS("csite", NULL, "csite", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_CSITE, 73, &periph_u_regs, TEGRA_PERIPH_ON_APB, csite, CLK_IGNORE_UNUSED), + TEGRA_INIT_DATA_MUX("la", NULL, "la", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_LA, 76, &periph_u_regs, TEGRA_PERIPH_ON_APB, la), + TEGRA_INIT_DATA_MUX("trace", NULL, "trace", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_TRACE, 77, &periph_u_regs, TEGRA_PERIPH_ON_APB, trace), + TEGRA_INIT_DATA_MUX("owr", NULL, "tegra_w1", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_OWR, 71, &periph_u_regs, TEGRA_PERIPH_ON_APB, owr), + TEGRA_INIT_DATA_MUX("nor", NULL, "tegra-nor", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_NOR, 42, &periph_h_regs, 0, nor), + TEGRA_INIT_DATA_MUX("mipi", NULL, "mipi", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_MIPI, 50, &periph_h_regs, TEGRA_PERIPH_ON_APB, mipi), + TEGRA_INIT_DATA_I2C("i2c1", "div-clk", "tegra11-i2c.0", mux_pllp_clkm, CLK_SOURCE_I2C1, 12, &periph_l_regs, i2c1), + TEGRA_INIT_DATA_I2C("i2c2", "div-clk", "tegra11-i2c.1", mux_pllp_clkm, CLK_SOURCE_I2C2, 54, &periph_h_regs, i2c2), + TEGRA_INIT_DATA_I2C("i2c3", "div-clk", "tegra11-i2c.2", mux_pllp_clkm, CLK_SOURCE_I2C3, 67, &periph_u_regs, i2c3), + TEGRA_INIT_DATA_I2C("i2c4", "div-clk", "tegra11-i2c.3", mux_pllp_clkm, CLK_SOURCE_I2C4, 103, &periph_v_regs, i2c4), + TEGRA_INIT_DATA_I2C("i2c5", "div-clk", "tegra11-i2c.4", mux_pllp_clkm, CLK_SOURCE_I2C5, 47, &periph_h_regs, i2c5), + TEGRA_INIT_DATA_UART("uarta", NULL, "tegra_uart.0", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_UARTA, 6, &periph_l_regs, uarta), + TEGRA_INIT_DATA_UART("uartb", NULL, "tegra_uart.1", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_UARTB, 7, &periph_l_regs, uartb), + TEGRA_INIT_DATA_UART("uartc", NULL, "tegra_uart.2", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_UARTC, 55, &periph_h_regs, uartc), + TEGRA_INIT_DATA_UART("uartd", NULL, "tegra_uart.3", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_UARTD, 65, &periph_u_regs, uartd), + TEGRA_INIT_DATA_INT("3d", NULL, "3d", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_3D, 24, &periph_l_regs, 0, gr_3d), + TEGRA_INIT_DATA_INT("2d", NULL, "2d", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_2D, 21, &periph_l_regs, 0, gr_2d), + TEGRA_INIT_DATA_MUX("vi_sensor", "vi_sensor", "tegra_camera", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_VI_SENSOR, 20, &periph_l_regs, TEGRA_PERIPH_NO_RESET, vi_sensor), + TEGRA_INIT_DATA_INT8("vi", "vi", "tegra_camera", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_VI, 20, &periph_l_regs, 0, vi), + TEGRA_INIT_DATA_INT8("epp", NULL, "epp", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_EPP, 19, &periph_l_regs, 0, epp), + TEGRA_INIT_DATA_INT8("msenc", NULL, "msenc", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_MSENC, 91, &periph_h_regs, TEGRA_PERIPH_WAR_1005168, msenc), + TEGRA_INIT_DATA_INT8("tsec", NULL, "tsec", mux_pllp_pllc2_c_c3_pllm_clkm, CLK_SOURCE_TSEC, 83, &periph_u_regs, 0, tsec), + TEGRA_INIT_DATA_INT8("host1x", NULL, "host1x", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_HOST1X, 28, &periph_l_regs, 0, host1x), + TEGRA_INIT_DATA_MUX8("hdmi", NULL, "hdmi", mux_pllp_pllm_plld_plla_pllc_plld2_clkm, CLK_SOURCE_HDMI, 51, &periph_h_regs, 0, hdmi), + TEGRA_INIT_DATA_MUX("cilab", "cilab", "tegra_camera", mux_pllp_pllc_clkm, CLK_SOURCE_CILAB, 144, &periph_w_regs, 0, cilab), + TEGRA_INIT_DATA_MUX("cilcd", "cilcd", "tegra_camera", mux_pllp_pllc_clkm, CLK_SOURCE_CILCD, 145, &periph_w_regs, 0, cilcd), + TEGRA_INIT_DATA_MUX("cile", "cile", "tegra_camera", mux_pllp_pllc_clkm, CLK_SOURCE_CILE, 146, &periph_w_regs, 0, cile), + TEGRA_INIT_DATA_MUX("dsialp", "dsialp", "tegradc.0", mux_pllp_pllc_clkm, CLK_SOURCE_DSIALP, 147, &periph_w_regs, 0, dsialp), + TEGRA_INIT_DATA_MUX("dsiblp", "dsiblp", "tegradc.1", mux_pllp_pllc_clkm, CLK_SOURCE_DSIBLP, 148, &periph_w_regs, 0, dsiblp), + TEGRA_INIT_DATA_MUX("tsensor", NULL, "tegra-tsensor", mux_pllp_pllc_clkm_clk32, CLK_SOURCE_TSENSOR, 100, &periph_v_regs, TEGRA_PERIPH_ON_APB, tsensor), + TEGRA_INIT_DATA_MUX("actmon", NULL, "actmon", mux_pllp_pllc_clk32_clkm, CLK_SOURCE_ACTMON, 119, &periph_v_regs, 0, actmon), + TEGRA_INIT_DATA_MUX8("extern1", NULL, "extern1", mux_plla_clk32_pllp_clkm_plle, CLK_SOURCE_EXTERN1, 120, &periph_v_regs, 0, extern1), + TEGRA_INIT_DATA_MUX8("extern2", NULL, "extern2", mux_plla_clk32_pllp_clkm_plle, CLK_SOURCE_EXTERN2, 121, &periph_v_regs, 0, extern2), + TEGRA_INIT_DATA_MUX8("extern3", NULL, "extern3", mux_plla_clk32_pllp_clkm_plle, CLK_SOURCE_EXTERN3, 122, &periph_v_regs, 0, extern3), + TEGRA_INIT_DATA_MUX("i2cslow", NULL, "i2cslow", mux_pllp_pllc_clk32_clkm, CLK_SOURCE_I2CSLOW, 81, &periph_u_regs, TEGRA_PERIPH_ON_APB, i2cslow), + TEGRA_INIT_DATA_INT8("se", NULL, "se", mux_pllp_pllc2_c_c3_pllm_clkm, CLK_SOURCE_SE, 127, &periph_v_regs, TEGRA_PERIPH_ON_APB, se), + TEGRA_INIT_DATA_INT_FLAGS("mselect", NULL, "mselect", mux_pllp_clkm, CLK_SOURCE_MSELECT, 99, &periph_v_regs, 0, mselect, CLK_IGNORE_UNUSED), + TEGRA_INIT_DATA_MUX8("soc_therm", NULL, "soc_therm", mux_pllm_pllc_pllp_plla, CLK_SOURCE_SOC_THERM, 78, &periph_u_regs, TEGRA_PERIPH_ON_APB, soc_therm), + TEGRA_INIT_DATA_XUSB("xusb_host_src", "host_src", "tegra_xhci", mux_clkm_pllp_pllc_pllre, CLK_SOURCE_XUSB_HOST_SRC, 143, &periph_w_regs, TEGRA_PERIPH_ON_APB | TEGRA_PERIPH_NO_RESET, xusb_host_src), + TEGRA_INIT_DATA_XUSB("xusb_falcon_src", "falcon_src", "tegra_xhci", mux_clkm_pllp_pllc_pllre, CLK_SOURCE_XUSB_FALCON_SRC, 143, &periph_w_regs, TEGRA_PERIPH_NO_RESET, xusb_falcon_src), + TEGRA_INIT_DATA_XUSB("xusb_fs_src", "fs_src", "tegra_xhci", mux_clkm_48M_pllp_480M, CLK_SOURCE_XUSB_FS_SRC, 143, &periph_w_regs, TEGRA_PERIPH_NO_RESET, xusb_fs_src), + TEGRA_INIT_DATA_XUSB("xusb_ss_src", "ss_src", "tegra_xhci", mux_clkm_pllre_clk32_480M_pllc_ref, CLK_SOURCE_XUSB_SS_SRC, 143, &periph_w_regs, TEGRA_PERIPH_NO_RESET, xusb_ss_src), + TEGRA_INIT_DATA_XUSB("xusb_dev_src", "dev_src", "tegra_xhci", mux_clkm_pllp_pllc_pllre, CLK_SOURCE_XUSB_DEV_SRC, 95, &periph_u_regs, TEGRA_PERIPH_ON_APB | TEGRA_PERIPH_NO_RESET, xusb_dev_src), + TEGRA_INIT_DATA_AUDIO("d_audio", "d_audio", "tegra30-ahub", CLK_SOURCE_D_AUDIO, 106, &periph_v_regs, TEGRA_PERIPH_ON_APB, d_audio), + TEGRA_INIT_DATA_AUDIO("dam0", NULL, "tegra30-dam.0", CLK_SOURCE_DAM0, 108, &periph_v_regs, TEGRA_PERIPH_ON_APB, dam0), + TEGRA_INIT_DATA_AUDIO("dam1", NULL, "tegra30-dam.1", CLK_SOURCE_DAM1, 109, &periph_v_regs, TEGRA_PERIPH_ON_APB, dam1), + TEGRA_INIT_DATA_AUDIO("dam2", NULL, "tegra30-dam.2", CLK_SOURCE_DAM2, 110, &periph_v_regs, TEGRA_PERIPH_ON_APB, dam2), +}; + +static struct tegra_periph_init_data tegra_periph_nodiv_clk_list[] = { + TEGRA_INIT_DATA_NODIV("disp1", NULL, "tegradc.0", mux_pllp_pllm_plld_plla_pllc_plld2_clkm, CLK_SOURCE_DISP1, 29, 7, 27, &periph_l_regs, 0, disp1), + TEGRA_INIT_DATA_NODIV("disp2", NULL, "tegradc.1", mux_pllp_pllm_plld_plla_pllc_plld2_clkm, CLK_SOURCE_DISP2, 29, 7, 26, &periph_l_regs, 0, disp2), +}; + +static __init void tegra114_periph_clk_init(void __iomem *clk_base) +{ + struct tegra_periph_init_data *data; + struct clk *clk; + int i; + u32 val; + + /* apbdma */ + clk = tegra_clk_register_periph_gate("apbdma", "clk_m", 0, clk_base, + 0, 34, &periph_h_regs, + periph_clk_enb_refcnt); + clks[apbdma] = clk; + + /* rtc */ + clk = tegra_clk_register_periph_gate("rtc", "clk_32k", + TEGRA_PERIPH_ON_APB | + TEGRA_PERIPH_NO_RESET, clk_base, + 0, 4, &periph_l_regs, + periph_clk_enb_refcnt); + clk_register_clkdev(clk, NULL, "rtc-tegra"); + clks[rtc] = clk; + + /* kbc */ + clk = tegra_clk_register_periph_gate("kbc", "clk_32k", + TEGRA_PERIPH_ON_APB | + TEGRA_PERIPH_NO_RESET, clk_base, + 0, 36, &periph_h_regs, + periph_clk_enb_refcnt); + clks[kbc] = clk; + + /* timer */ + clk = tegra_clk_register_periph_gate("timer", "clk_m", 0, clk_base, + 0, 5, &periph_l_regs, + periph_clk_enb_refcnt); + clk_register_clkdev(clk, NULL, "timer"); + clks[timer] = clk; + + /* kfuse */ + clk = tegra_clk_register_periph_gate("kfuse", "clk_m", + TEGRA_PERIPH_ON_APB, clk_base, 0, 40, + &periph_h_regs, periph_clk_enb_refcnt); + clks[kfuse] = clk; + + /* fuse */ + clk = tegra_clk_register_periph_gate("fuse", "clk_m", + TEGRA_PERIPH_ON_APB, clk_base, 0, 39, + &periph_h_regs, periph_clk_enb_refcnt); + clks[fuse] = clk; + + /* fuse_burn */ + clk = tegra_clk_register_periph_gate("fuse_burn", "clk_m", + TEGRA_PERIPH_ON_APB, clk_base, 0, 39, + &periph_h_regs, periph_clk_enb_refcnt); + clks[fuse_burn] = clk; + + /* apbif */ + clk = tegra_clk_register_periph_gate("apbif", "clk_m", + TEGRA_PERIPH_ON_APB, clk_base, 0, 107, + &periph_v_regs, periph_clk_enb_refcnt); + clks[apbif] = clk; + + /* hda2hdmi */ + clk = tegra_clk_register_periph_gate("hda2hdmi", "clk_m", + TEGRA_PERIPH_ON_APB, clk_base, 0, 128, + &periph_w_regs, periph_clk_enb_refcnt); + clks[hda2hdmi] = clk; + + /* vcp */ + clk = tegra_clk_register_periph_gate("vcp", "clk_m", 0, clk_base, 0, + 29, &periph_l_regs, + periph_clk_enb_refcnt); + clks[vcp] = clk; + + /* bsea */ + clk = tegra_clk_register_periph_gate("bsea", "clk_m", 0, clk_base, + 0, 62, &periph_h_regs, + periph_clk_enb_refcnt); + clks[bsea] = clk; + + /* bsev */ + clk = tegra_clk_register_periph_gate("bsev", "clk_m", 0, clk_base, + 0, 63, &periph_h_regs, + periph_clk_enb_refcnt); + clks[bsev] = clk; + + /* mipi-cal */ + clk = tegra_clk_register_periph_gate("mipi-cal", "clk_m", 0, clk_base, + 0, 56, &periph_h_regs, + periph_clk_enb_refcnt); + clks[mipi_cal] = clk; + + /* usbd */ + clk = tegra_clk_register_periph_gate("usbd", "clk_m", 0, clk_base, + 0, 22, &periph_l_regs, + periph_clk_enb_refcnt); + clks[usbd] = clk; + + /* usb2 */ + clk = tegra_clk_register_periph_gate("usb2", "clk_m", 0, clk_base, + 0, 58, &periph_h_regs, + periph_clk_enb_refcnt); + clks[usb2] = clk; + + /* usb3 */ + clk = tegra_clk_register_periph_gate("usb3", "clk_m", 0, clk_base, + 0, 59, &periph_h_regs, + periph_clk_enb_refcnt); + clks[usb3] = clk; + + /* csi */ + clk = tegra_clk_register_periph_gate("csi", "pll_p_out3", 0, clk_base, + 0, 52, &periph_h_regs, + periph_clk_enb_refcnt); + clks[csi] = clk; + + /* isp */ + clk = tegra_clk_register_periph_gate("isp", "clk_m", 0, clk_base, 0, + 23, &periph_l_regs, + periph_clk_enb_refcnt); + clks[isp] = clk; + + /* csus */ + clk = tegra_clk_register_periph_gate("csus", "clk_m", + TEGRA_PERIPH_NO_RESET, clk_base, 0, 92, + &periph_u_regs, periph_clk_enb_refcnt); + clks[csus] = clk; + + /* dds */ + clk = tegra_clk_register_periph_gate("dds", "clk_m", + TEGRA_PERIPH_ON_APB, clk_base, 0, 150, + &periph_w_regs, periph_clk_enb_refcnt); + clks[dds] = clk; + + /* dp2 */ + clk = tegra_clk_register_periph_gate("dp2", "clk_m", + TEGRA_PERIPH_ON_APB, clk_base, 0, 152, + &periph_w_regs, periph_clk_enb_refcnt); + clks[dp2] = clk; + + /* dtv */ + clk = tegra_clk_register_periph_gate("dtv", "clk_m", + TEGRA_PERIPH_ON_APB, clk_base, 0, 79, + &periph_u_regs, periph_clk_enb_refcnt); + clks[dtv] = clk; + + /* dsia */ + clk = clk_register_mux(NULL, "dsia_mux", mux_plld_out0_plld2_out0, + ARRAY_SIZE(mux_plld_out0_plld2_out0), 0, + clk_base + PLLD_BASE, 25, 1, 0, &pll_d_lock); + clks[dsia_mux] = clk; + clk = tegra_clk_register_periph_gate("dsia", "dsia_mux", 0, clk_base, + 0, 48, &periph_h_regs, + periph_clk_enb_refcnt); + clks[dsia] = clk; + + /* dsib */ + clk = clk_register_mux(NULL, "dsib_mux", mux_plld_out0_plld2_out0, + ARRAY_SIZE(mux_plld_out0_plld2_out0), 0, + clk_base + PLLD2_BASE, 25, 1, 0, &pll_d2_lock); + clks[dsib_mux] = clk; + clk = tegra_clk_register_periph_gate("dsib", "dsib_mux", 0, clk_base, + 0, 82, &periph_u_regs, + periph_clk_enb_refcnt); + clks[dsib] = clk; + + /* xusb_hs_src */ + val = readl(clk_base + CLK_SOURCE_XUSB_SS_SRC); + val |= BIT(25); /* always select PLLU_60M */ + writel(val, clk_base + CLK_SOURCE_XUSB_SS_SRC); + + clk = clk_register_fixed_factor(NULL, "xusb_hs_src", "pll_u_60M", 0, + 1, 1); + clks[xusb_hs_src] = clk; + + /* xusb_host */ + clk = tegra_clk_register_periph_gate("xusb_host", "xusb_host_src", 0, + clk_base, 0, 89, &periph_u_regs, + periph_clk_enb_refcnt); + clks[xusb_host] = clk; + + /* xusb_ss */ + clk = tegra_clk_register_periph_gate("xusb_ss", "xusb_ss_src", 0, + clk_base, 0, 156, &periph_w_regs, + periph_clk_enb_refcnt); + clks[xusb_host] = clk; + + /* xusb_dev */ + clk = tegra_clk_register_periph_gate("xusb_dev", "xusb_dev_src", 0, + clk_base, 0, 95, &periph_u_regs, + periph_clk_enb_refcnt); + clks[xusb_dev] = clk; + + /* emc */ + clk = clk_register_mux(NULL, "emc_mux", mux_pllmcp_clkm, + ARRAY_SIZE(mux_pllmcp_clkm), 0, + clk_base + CLK_SOURCE_EMC, + 29, 3, 0, NULL); + clk = tegra_clk_register_periph_gate("emc", "emc_mux", 0, clk_base, + CLK_IGNORE_UNUSED, 57, &periph_h_regs, + periph_clk_enb_refcnt); + clks[emc] = clk; + + for (i = 0; i < ARRAY_SIZE(tegra_periph_clk_list); i++) { + data = &tegra_periph_clk_list[i]; + clk = tegra_clk_register_periph(data->name, data->parent_names, + data->num_parents, &data->periph, + clk_base, data->offset, data->flags); + clks[data->clk_id] = clk; + } + + for (i = 0; i < ARRAY_SIZE(tegra_periph_nodiv_clk_list); i++) { + data = &tegra_periph_nodiv_clk_list[i]; + clk = tegra_clk_register_periph_nodiv(data->name, + data->parent_names, data->num_parents, + &data->periph, clk_base, data->offset); + clks[data->clk_id] = clk; + } +} + +static struct tegra_cpu_car_ops tegra114_cpu_car_ops; + +static const struct of_device_id pmc_match[] __initconst = { + { .compatible = "nvidia,tegra114-pmc" }, + {}, +}; + +static __initdata struct tegra_clk_init_table init_table[] = { + {uarta, pll_p, 408000000, 0}, + {uartb, pll_p, 408000000, 0}, + {uartc, pll_p, 408000000, 0}, + {uartd, pll_p, 408000000, 0}, + {pll_a, clk_max, 564480000, 1}, + {pll_a_out0, clk_max, 11289600, 1}, + {extern1, pll_a_out0, 0, 1}, + {clk_out_1_mux, extern1, 0, 1}, + {clk_out_1, clk_max, 0, 1}, + {i2s0, pll_a_out0, 11289600, 0}, + {i2s1, pll_a_out0, 11289600, 0}, + {i2s2, pll_a_out0, 11289600, 0}, + {i2s3, pll_a_out0, 11289600, 0}, + {i2s4, pll_a_out0, 11289600, 0}, + {clk_max, clk_max, 0, 0}, /* This MUST be the last entry. */ +}; + +static void __init tegra114_clock_apply_init_table(void) +{ + tegra_init_from_table(init_table, clks, clk_max); +} + +void __init tegra114_clock_init(struct device_node *np) +{ + struct device_node *node; + int i; + + clk_base = of_iomap(np, 0); + if (!clk_base) { + pr_err("ioremap tegra114 CAR failed\n"); + return; + } + + node = of_find_matching_node(NULL, pmc_match); + if (!node) { + pr_err("Failed to find pmc node\n"); + WARN_ON(1); + return; + } + + pmc_base = of_iomap(node, 0); + if (!pmc_base) { + pr_err("Can't map pmc registers\n"); + WARN_ON(1); + return; + } + + if (tegra114_osc_clk_init(clk_base) < 0) + return; + + tegra114_fixed_clk_init(clk_base); + tegra114_pll_init(clk_base, pmc_base); + tegra114_periph_clk_init(clk_base); + tegra114_audio_clk_init(clk_base); + tegra114_pmc_clk_init(pmc_base); + tegra114_super_clk_init(clk_base); + + for (i = 0; i < ARRAY_SIZE(clks); i++) { + if (IS_ERR(clks[i])) { + pr_err + ("Tegra114 clk %d: register failed with %ld\n", + i, PTR_ERR(clks[i])); + } + if (!clks[i]) + clks[i] = ERR_PTR(-EINVAL); + } + + clk_data.clks = clks; + clk_data.clk_num = ARRAY_SIZE(clks); + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); + + tegra_clk_apply_init_table = tegra114_clock_apply_init_table; + + tegra_cpu_car_ops = &tegra114_cpu_car_ops; +} diff --git a/drivers/clk/tegra/clk-tegra20.c b/drivers/clk/tegra/clk-tegra20.c index 1e2de73..b0405b6 100644 --- a/drivers/clk/tegra/clk-tegra20.c +++ b/drivers/clk/tegra/clk-tegra20.c @@ -86,8 +86,8 @@ #define PLLE_BASE 0xe8 #define PLLE_MISC 0xec -#define PLL_BASE_LOCK 27 -#define PLLE_MISC_LOCK 11 +#define PLL_BASE_LOCK BIT(27) +#define PLLE_MISC_LOCK BIT(11) #define PLL_MISC_LOCK_ENABLE 18 #define PLLDU_MISC_LOCK_ENABLE 22 @@ -236,7 +236,7 @@ enum tegra20_clk { dvc, dsi, mipi = 50, hdmi, csi, tvdac, i2c2, uartc, emc = 57, usb2, usb3, mpe, vde, bsea, bsev, speedo, uartd, uarte, i2c3, sbc4, sdmmc3, pex, owr, afi, csite, pcie_xclk, avpucq = 75, la, irama = 84, iramb, - iramc, iramd, cram2, audio_2x, clk_d, csus = 92, cdev1, cdev2, + iramc, iramd, cram2, audio_2x, clk_d, csus = 92, cdev2, cdev1, uartb = 96, vfir, spdif_in, spdif_out, vi, vi_sensor, tvo, cve, osc, clk_32k, clk_m, sclk, cclk, hclk, pclk, blink, pll_a, pll_a_out0, pll_c, pll_c_out1, pll_d, pll_d_out0, pll_e, pll_m, pll_m_out1, @@ -248,125 +248,125 @@ static struct clk *clks[clk_max]; static struct clk_onecell_data clk_data; static struct tegra_clk_pll_freq_table pll_c_freq_table[] = { - { 12000000, 600000000, 600, 12, 1, 8 }, - { 13000000, 600000000, 600, 13, 1, 8 }, - { 19200000, 600000000, 500, 16, 1, 6 }, - { 26000000, 600000000, 600, 26, 1, 8 }, + { 12000000, 600000000, 600, 12, 0, 8 }, + { 13000000, 600000000, 600, 13, 0, 8 }, + { 19200000, 600000000, 500, 16, 0, 6 }, + { 26000000, 600000000, 600, 26, 0, 8 }, { 0, 0, 0, 0, 0, 0 }, }; static struct tegra_clk_pll_freq_table pll_m_freq_table[] = { - { 12000000, 666000000, 666, 12, 1, 8}, - { 13000000, 666000000, 666, 13, 1, 8}, - { 19200000, 666000000, 555, 16, 1, 8}, - { 26000000, 666000000, 666, 26, 1, 8}, - { 12000000, 600000000, 600, 12, 1, 8}, - { 13000000, 600000000, 600, 13, 1, 8}, - { 19200000, 600000000, 375, 12, 1, 6}, - { 26000000, 600000000, 600, 26, 1, 8}, + { 12000000, 666000000, 666, 12, 0, 8}, + { 13000000, 666000000, 666, 13, 0, 8}, + { 19200000, 666000000, 555, 16, 0, 8}, + { 26000000, 666000000, 666, 26, 0, 8}, + { 12000000, 600000000, 600, 12, 0, 8}, + { 13000000, 600000000, 600, 13, 0, 8}, + { 19200000, 600000000, 375, 12, 0, 6}, + { 26000000, 600000000, 600, 26, 0, 8}, { 0, 0, 0, 0, 0, 0 }, }; static struct tegra_clk_pll_freq_table pll_p_freq_table[] = { - { 12000000, 216000000, 432, 12, 2, 8}, - { 13000000, 216000000, 432, 13, 2, 8}, - { 19200000, 216000000, 90, 4, 2, 1}, - { 26000000, 216000000, 432, 26, 2, 8}, - { 12000000, 432000000, 432, 12, 1, 8}, - { 13000000, 432000000, 432, 13, 1, 8}, - { 19200000, 432000000, 90, 4, 1, 1}, - { 26000000, 432000000, 432, 26, 1, 8}, + { 12000000, 216000000, 432, 12, 1, 8}, + { 13000000, 216000000, 432, 13, 1, 8}, + { 19200000, 216000000, 90, 4, 1, 1}, + { 26000000, 216000000, 432, 26, 1, 8}, + { 12000000, 432000000, 432, 12, 0, 8}, + { 13000000, 432000000, 432, 13, 0, 8}, + { 19200000, 432000000, 90, 4, 0, 1}, + { 26000000, 432000000, 432, 26, 0, 8}, { 0, 0, 0, 0, 0, 0 }, }; static struct tegra_clk_pll_freq_table pll_a_freq_table[] = { - { 28800000, 56448000, 49, 25, 1, 1}, - { 28800000, 73728000, 64, 25, 1, 1}, - { 28800000, 24000000, 5, 6, 1, 1}, + { 28800000, 56448000, 49, 25, 0, 1}, + { 28800000, 73728000, 64, 25, 0, 1}, + { 28800000, 24000000, 5, 6, 0, 1}, { 0, 0, 0, 0, 0, 0 }, }; static struct tegra_clk_pll_freq_table pll_d_freq_table[] = { - { 12000000, 216000000, 216, 12, 1, 4}, - { 13000000, 216000000, 216, 13, 1, 4}, - { 19200000, 216000000, 135, 12, 1, 3}, - { 26000000, 216000000, 216, 26, 1, 4}, + { 12000000, 216000000, 216, 12, 0, 4}, + { 13000000, 216000000, 216, 13, 0, 4}, + { 19200000, 216000000, 135, 12, 0, 3}, + { 26000000, 216000000, 216, 26, 0, 4}, - { 12000000, 594000000, 594, 12, 1, 8}, - { 13000000, 594000000, 594, 13, 1, 8}, - { 19200000, 594000000, 495, 16, 1, 8}, - { 26000000, 594000000, 594, 26, 1, 8}, + { 12000000, 594000000, 594, 12, 0, 8}, + { 13000000, 594000000, 594, 13, 0, 8}, + { 19200000, 594000000, 495, 16, 0, 8}, + { 26000000, 594000000, 594, 26, 0, 8}, - { 12000000, 1000000000, 1000, 12, 1, 12}, - { 13000000, 1000000000, 1000, 13, 1, 12}, - { 19200000, 1000000000, 625, 12, 1, 8}, - { 26000000, 1000000000, 1000, 26, 1, 12}, + { 12000000, 1000000000, 1000, 12, 0, 12}, + { 13000000, 1000000000, 1000, 13, 0, 12}, + { 19200000, 1000000000, 625, 12, 0, 8}, + { 26000000, 1000000000, 1000, 26, 0, 12}, { 0, 0, 0, 0, 0, 0 }, }; static struct tegra_clk_pll_freq_table pll_u_freq_table[] = { - { 12000000, 480000000, 960, 12, 2, 0}, - { 13000000, 480000000, 960, 13, 2, 0}, - { 19200000, 480000000, 200, 4, 2, 0}, - { 26000000, 480000000, 960, 26, 2, 0}, + { 12000000, 480000000, 960, 12, 0, 0}, + { 13000000, 480000000, 960, 13, 0, 0}, + { 19200000, 480000000, 200, 4, 0, 0}, + { 26000000, 480000000, 960, 26, 0, 0}, { 0, 0, 0, 0, 0, 0 }, }; static struct tegra_clk_pll_freq_table pll_x_freq_table[] = { /* 1 GHz */ - { 12000000, 1000000000, 1000, 12, 1, 12}, - { 13000000, 1000000000, 1000, 13, 1, 12}, - { 19200000, 1000000000, 625, 12, 1, 8}, - { 26000000, 1000000000, 1000, 26, 1, 12}, + { 12000000, 1000000000, 1000, 12, 0, 12}, + { 13000000, 1000000000, 1000, 13, 0, 12}, + { 19200000, 1000000000, 625, 12, 0, 8}, + { 26000000, 1000000000, 1000, 26, 0, 12}, /* 912 MHz */ - { 12000000, 912000000, 912, 12, 1, 12}, - { 13000000, 912000000, 912, 13, 1, 12}, - { 19200000, 912000000, 760, 16, 1, 8}, - { 26000000, 912000000, 912, 26, 1, 12}, + { 12000000, 912000000, 912, 12, 0, 12}, + { 13000000, 912000000, 912, 13, 0, 12}, + { 19200000, 912000000, 760, 16, 0, 8}, + { 26000000, 912000000, 912, 26, 0, 12}, /* 816 MHz */ - { 12000000, 816000000, 816, 12, 1, 12}, - { 13000000, 816000000, 816, 13, 1, 12}, - { 19200000, 816000000, 680, 16, 1, 8}, - { 26000000, 816000000, 816, 26, 1, 12}, + { 12000000, 816000000, 816, 12, 0, 12}, + { 13000000, 816000000, 816, 13, 0, 12}, + { 19200000, 816000000, 680, 16, 0, 8}, + { 26000000, 816000000, 816, 26, 0, 12}, /* 760 MHz */ - { 12000000, 760000000, 760, 12, 1, 12}, - { 13000000, 760000000, 760, 13, 1, 12}, - { 19200000, 760000000, 950, 24, 1, 8}, - { 26000000, 760000000, 760, 26, 1, 12}, + { 12000000, 760000000, 760, 12, 0, 12}, + { 13000000, 760000000, 760, 13, 0, 12}, + { 19200000, 760000000, 950, 24, 0, 8}, + { 26000000, 760000000, 760, 26, 0, 12}, /* 750 MHz */ - { 12000000, 750000000, 750, 12, 1, 12}, - { 13000000, 750000000, 750, 13, 1, 12}, - { 19200000, 750000000, 625, 16, 1, 8}, - { 26000000, 750000000, 750, 26, 1, 12}, + { 12000000, 750000000, 750, 12, 0, 12}, + { 13000000, 750000000, 750, 13, 0, 12}, + { 19200000, 750000000, 625, 16, 0, 8}, + { 26000000, 750000000, 750, 26, 0, 12}, /* 608 MHz */ - { 12000000, 608000000, 608, 12, 1, 12}, - { 13000000, 608000000, 608, 13, 1, 12}, - { 19200000, 608000000, 380, 12, 1, 8}, - { 26000000, 608000000, 608, 26, 1, 12}, + { 12000000, 608000000, 608, 12, 0, 12}, + { 13000000, 608000000, 608, 13, 0, 12}, + { 19200000, 608000000, 380, 12, 0, 8}, + { 26000000, 608000000, 608, 26, 0, 12}, /* 456 MHz */ - { 12000000, 456000000, 456, 12, 1, 12}, - { 13000000, 456000000, 456, 13, 1, 12}, - { 19200000, 456000000, 380, 16, 1, 8}, - { 26000000, 456000000, 456, 26, 1, 12}, + { 12000000, 456000000, 456, 12, 0, 12}, + { 13000000, 456000000, 456, 13, 0, 12}, + { 19200000, 456000000, 380, 16, 0, 8}, + { 26000000, 456000000, 456, 26, 0, 12}, /* 312 MHz */ - { 12000000, 312000000, 312, 12, 1, 12}, - { 13000000, 312000000, 312, 13, 1, 12}, - { 19200000, 312000000, 260, 16, 1, 8}, - { 26000000, 312000000, 312, 26, 1, 12}, + { 12000000, 312000000, 312, 12, 0, 12}, + { 13000000, 312000000, 312, 13, 0, 12}, + { 19200000, 312000000, 260, 16, 0, 8}, + { 26000000, 312000000, 312, 26, 0, 12}, { 0, 0, 0, 0, 0, 0 }, }; static struct tegra_clk_pll_freq_table pll_e_freq_table[] = { - { 12000000, 100000000, 200, 24, 1, 0 }, + { 12000000, 100000000, 200, 24, 0, 0 }, { 0, 0, 0, 0, 0, 0 }, }; @@ -380,7 +380,7 @@ static struct tegra_clk_pll_params pll_c_params = { .vco_max = 1400000000, .base_reg = PLLC_BASE, .misc_reg = PLLC_MISC, - .lock_bit_idx = PLL_BASE_LOCK, + .lock_mask = PLL_BASE_LOCK, .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE, .lock_delay = 300, }; @@ -394,7 +394,7 @@ static struct tegra_clk_pll_params pll_m_params = { .vco_max = 1200000000, .base_reg = PLLM_BASE, .misc_reg = PLLM_MISC, - .lock_bit_idx = PLL_BASE_LOCK, + .lock_mask = PLL_BASE_LOCK, .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE, .lock_delay = 300, }; @@ -408,7 +408,7 @@ static struct tegra_clk_pll_params pll_p_params = { .vco_max = 1400000000, .base_reg = PLLP_BASE, .misc_reg = PLLP_MISC, - .lock_bit_idx = PLL_BASE_LOCK, + .lock_mask = PLL_BASE_LOCK, .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE, .lock_delay = 300, }; @@ -422,7 +422,7 @@ static struct tegra_clk_pll_params pll_a_params = { .vco_max = 1400000000, .base_reg = PLLA_BASE, .misc_reg = PLLA_MISC, - .lock_bit_idx = PLL_BASE_LOCK, + .lock_mask = PLL_BASE_LOCK, .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE, .lock_delay = 300, }; @@ -436,11 +436,17 @@ static struct tegra_clk_pll_params pll_d_params = { .vco_max = 1000000000, .base_reg = PLLD_BASE, .misc_reg = PLLD_MISC, - .lock_bit_idx = PLL_BASE_LOCK, + .lock_mask = PLL_BASE_LOCK, .lock_enable_bit_idx = PLLDU_MISC_LOCK_ENABLE, .lock_delay = 1000, }; +static struct pdiv_map pllu_p[] = { + { .pdiv = 1, .hw_val = 1 }, + { .pdiv = 2, .hw_val = 0 }, + { .pdiv = 0, .hw_val = 0 }, +}; + static struct tegra_clk_pll_params pll_u_params = { .input_min = 2000000, .input_max = 40000000, @@ -450,9 +456,10 @@ static struct tegra_clk_pll_params pll_u_params = { .vco_max = 960000000, .base_reg = PLLU_BASE, .misc_reg = PLLU_MISC, - .lock_bit_idx = PLL_BASE_LOCK, + .lock_mask = PLL_BASE_LOCK, .lock_enable_bit_idx = PLLDU_MISC_LOCK_ENABLE, .lock_delay = 1000, + .pdiv_tohw = pllu_p, }; static struct tegra_clk_pll_params pll_x_params = { @@ -464,7 +471,7 @@ static struct tegra_clk_pll_params pll_x_params = { .vco_max = 1200000000, .base_reg = PLLX_BASE, .misc_reg = PLLX_MISC, - .lock_bit_idx = PLL_BASE_LOCK, + .lock_mask = PLL_BASE_LOCK, .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE, .lock_delay = 300, }; @@ -478,7 +485,7 @@ static struct tegra_clk_pll_params pll_e_params = { .vco_max = 0, .base_reg = PLLE_BASE, .misc_reg = PLLE_MISC, - .lock_bit_idx = PLLE_MISC_LOCK, + .lock_mask = PLLE_MISC_LOCK, .lock_enable_bit_idx = PLLE_MISC_LOCK_ENABLE, .lock_delay = 0, }; @@ -711,8 +718,8 @@ static void tegra20_pll_init(void) } static const char *cclk_parents[] = { "clk_m", "pll_c", "clk_32k", "pll_m", - "pll_p_cclk", "pll_p_out4_cclk", - "pll_p_out3_cclk", "clk_d", "pll_x" }; + "pll_p", "pll_p_out4", + "pll_p_out3", "clk_d", "pll_x" }; static const char *sclk_parents[] = { "clk_m", "pll_c_out1", "pll_p_out4", "pll_p_out3", "pll_p_out2", "clk_d", "clk_32k", "pll_m_out1" }; @@ -721,38 +728,6 @@ static void tegra20_super_clk_init(void) { struct clk *clk; - /* - * DIV_U71 dividers for CCLK, these dividers are used only - * if parent clock is fixed rate. - */ - - /* - * Clock input to cclk divided from pll_p using - * U71 divider of cclk. - */ - clk = tegra_clk_register_divider("pll_p_cclk", "pll_p", - clk_base + SUPER_CCLK_DIVIDER, 0, - TEGRA_DIVIDER_INT, 16, 8, 1, NULL); - clk_register_clkdev(clk, "pll_p_cclk", NULL); - - /* - * Clock input to cclk divided from pll_p_out3 using - * U71 divider of cclk. - */ - clk = tegra_clk_register_divider("pll_p_out3_cclk", "pll_p_out3", - clk_base + SUPER_CCLK_DIVIDER, 0, - TEGRA_DIVIDER_INT, 16, 8, 1, NULL); - clk_register_clkdev(clk, "pll_p_out3_cclk", NULL); - - /* - * Clock input to cclk divided from pll_p_out4 using - * U71 divider of cclk. - */ - clk = tegra_clk_register_divider("pll_p_out4_cclk", "pll_p_out4", - clk_base + SUPER_CCLK_DIVIDER, 0, - TEGRA_DIVIDER_INT, 16, 8, 1, NULL); - clk_register_clkdev(clk, "pll_p_out4_cclk", NULL); - /* CCLK */ clk = tegra_clk_register_super_mux("cclk", cclk_parents, ARRAY_SIZE(cclk_parents), CLK_SET_RATE_PARENT, @@ -1044,7 +1019,7 @@ static void __init tegra20_periph_clk_init(void) data = &tegra_periph_clk_list[i]; clk = tegra_clk_register_periph(data->name, data->parent_names, data->num_parents, &data->periph, - clk_base, data->offset); + clk_base, data->offset, data->flags); clk_register_clkdev(clk, data->con_id, data->dev_id); clks[data->clk_id] = clk; } @@ -1279,9 +1254,16 @@ static __initdata struct tegra_clk_init_table init_table[] = { {host1x, pll_c, 150000000, 0}, {disp1, pll_p, 600000000, 0}, {disp2, pll_p, 600000000, 0}, + {gr2d, pll_c, 300000000, 0}, + {gr3d, pll_c, 300000000, 0}, {clk_max, clk_max, 0, 0}, /* This MUST be the last entry */ }; +static void __init tegra20_clock_apply_init_table(void) +{ + tegra_init_from_table(init_table, clks, clk_max); +} + /* * Some clocks may be used by different drivers depending on the board * configuration. List those here to register them twice in the clock lookup @@ -1348,7 +1330,7 @@ void __init tegra20_clock_init(struct device_node *np) clk_data.clk_num = ARRAY_SIZE(clks); of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); - tegra_init_from_table(init_table, clks, clk_max); + tegra_clk_apply_init_table = tegra20_clock_apply_init_table; tegra_cpu_car_ops = &tegra20_cpu_car_ops; } diff --git a/drivers/clk/tegra/clk-tegra30.c b/drivers/clk/tegra/clk-tegra30.c index ba6f51b..2dc0c56 100644 --- a/drivers/clk/tegra/clk-tegra30.c +++ b/drivers/clk/tegra/clk-tegra30.c @@ -116,8 +116,8 @@ #define PLLDU_MISC_LOCK_ENABLE 22 #define PLLE_MISC_LOCK_ENABLE 9 -#define PLL_BASE_LOCK 27 -#define PLLE_MISC_LOCK 11 +#define PLL_BASE_LOCK BIT(27) +#define PLLE_MISC_LOCK BIT(11) #define PLLE_AUX 0x48c #define PLLC_OUT 0x84 @@ -330,7 +330,7 @@ enum tegra30_clk { usb3, mpe, vde, bsea, bsev, speedo, uartd, uarte, i2c3, sbc4, sdmmc3, pcie, owr, afi, csite, pciex, avpucq, la, dtv = 79, ndspeed, i2cslow, dsib, irama = 84, iramb, iramc, iramd, cram2, audio_2x = 90, csus = 92, - cdev1, cdev2, cpu_g = 96, cpu_lp, gr3d2, mselect, tsensor, i2s3, i2s4, + cdev2, cdev1, cpu_g = 96, cpu_lp, gr3d2, mselect, tsensor, i2s3, i2s4, i2c4, sbc5, sbc6, d_audio, apbif, dam0, dam1, dam2, hda2codec_2x, atomics, audio0_2x, audio1_2x, audio2_2x, audio3_2x, audio4_2x, spdif_2x, actmon, extern1, extern2, extern3, sata_oob, sata, hda, @@ -374,164 +374,170 @@ static const struct utmi_clk_param utmi_parameters[] = { }; static struct tegra_clk_pll_freq_table pll_c_freq_table[] = { - { 12000000, 1040000000, 520, 6, 1, 8}, - { 13000000, 1040000000, 480, 6, 1, 8}, - { 16800000, 1040000000, 495, 8, 1, 8}, /* actual: 1039.5 MHz */ - { 19200000, 1040000000, 325, 6, 1, 6}, - { 26000000, 1040000000, 520, 13, 1, 8}, - - { 12000000, 832000000, 416, 6, 1, 8}, - { 13000000, 832000000, 832, 13, 1, 8}, - { 16800000, 832000000, 396, 8, 1, 8}, /* actual: 831.6 MHz */ - { 19200000, 832000000, 260, 6, 1, 8}, - { 26000000, 832000000, 416, 13, 1, 8}, - - { 12000000, 624000000, 624, 12, 1, 8}, - { 13000000, 624000000, 624, 13, 1, 8}, - { 16800000, 600000000, 520, 14, 1, 8}, - { 19200000, 624000000, 520, 16, 1, 8}, - { 26000000, 624000000, 624, 26, 1, 8}, - - { 12000000, 600000000, 600, 12, 1, 8}, - { 13000000, 600000000, 600, 13, 1, 8}, - { 16800000, 600000000, 500, 14, 1, 8}, - { 19200000, 600000000, 375, 12, 1, 6}, - { 26000000, 600000000, 600, 26, 1, 8}, - - { 12000000, 520000000, 520, 12, 1, 8}, - { 13000000, 520000000, 520, 13, 1, 8}, - { 16800000, 520000000, 495, 16, 1, 8}, /* actual: 519.75 MHz */ - { 19200000, 520000000, 325, 12, 1, 6}, - { 26000000, 520000000, 520, 26, 1, 8}, - - { 12000000, 416000000, 416, 12, 1, 8}, - { 13000000, 416000000, 416, 13, 1, 8}, - { 16800000, 416000000, 396, 16, 1, 8}, /* actual: 415.8 MHz */ - { 19200000, 416000000, 260, 12, 1, 6}, - { 26000000, 416000000, 416, 26, 1, 8}, + { 12000000, 1040000000, 520, 6, 0, 8}, + { 13000000, 1040000000, 480, 6, 0, 8}, + { 16800000, 1040000000, 495, 8, 0, 8}, /* actual: 1039.5 MHz */ + { 19200000, 1040000000, 325, 6, 0, 6}, + { 26000000, 1040000000, 520, 13, 0, 8}, + + { 12000000, 832000000, 416, 6, 0, 8}, + { 13000000, 832000000, 832, 13, 0, 8}, + { 16800000, 832000000, 396, 8, 0, 8}, /* actual: 831.6 MHz */ + { 19200000, 832000000, 260, 6, 0, 8}, + { 26000000, 832000000, 416, 13, 0, 8}, + + { 12000000, 624000000, 624, 12, 0, 8}, + { 13000000, 624000000, 624, 13, 0, 8}, + { 16800000, 600000000, 520, 14, 0, 8}, + { 19200000, 624000000, 520, 16, 0, 8}, + { 26000000, 624000000, 624, 26, 0, 8}, + + { 12000000, 600000000, 600, 12, 0, 8}, + { 13000000, 600000000, 600, 13, 0, 8}, + { 16800000, 600000000, 500, 14, 0, 8}, + { 19200000, 600000000, 375, 12, 0, 6}, + { 26000000, 600000000, 600, 26, 0, 8}, + + { 12000000, 520000000, 520, 12, 0, 8}, + { 13000000, 520000000, 520, 13, 0, 8}, + { 16800000, 520000000, 495, 16, 0, 8}, /* actual: 519.75 MHz */ + { 19200000, 520000000, 325, 12, 0, 6}, + { 26000000, 520000000, 520, 26, 0, 8}, + + { 12000000, 416000000, 416, 12, 0, 8}, + { 13000000, 416000000, 416, 13, 0, 8}, + { 16800000, 416000000, 396, 16, 0, 8}, /* actual: 415.8 MHz */ + { 19200000, 416000000, 260, 12, 0, 6}, + { 26000000, 416000000, 416, 26, 0, 8}, { 0, 0, 0, 0, 0, 0 }, }; static struct tegra_clk_pll_freq_table pll_m_freq_table[] = { - { 12000000, 666000000, 666, 12, 1, 8}, - { 13000000, 666000000, 666, 13, 1, 8}, - { 16800000, 666000000, 555, 14, 1, 8}, - { 19200000, 666000000, 555, 16, 1, 8}, - { 26000000, 666000000, 666, 26, 1, 8}, - { 12000000, 600000000, 600, 12, 1, 8}, - { 13000000, 600000000, 600, 13, 1, 8}, - { 16800000, 600000000, 500, 14, 1, 8}, - { 19200000, 600000000, 375, 12, 1, 6}, - { 26000000, 600000000, 600, 26, 1, 8}, + { 12000000, 666000000, 666, 12, 0, 8}, + { 13000000, 666000000, 666, 13, 0, 8}, + { 16800000, 666000000, 555, 14, 0, 8}, + { 19200000, 666000000, 555, 16, 0, 8}, + { 26000000, 666000000, 666, 26, 0, 8}, + { 12000000, 600000000, 600, 12, 0, 8}, + { 13000000, 600000000, 600, 13, 0, 8}, + { 16800000, 600000000, 500, 14, 0, 8}, + { 19200000, 600000000, 375, 12, 0, 6}, + { 26000000, 600000000, 600, 26, 0, 8}, { 0, 0, 0, 0, 0, 0 }, }; static struct tegra_clk_pll_freq_table pll_p_freq_table[] = { - { 12000000, 216000000, 432, 12, 2, 8}, - { 13000000, 216000000, 432, 13, 2, 8}, - { 16800000, 216000000, 360, 14, 2, 8}, - { 19200000, 216000000, 360, 16, 2, 8}, - { 26000000, 216000000, 432, 26, 2, 8}, + { 12000000, 216000000, 432, 12, 1, 8}, + { 13000000, 216000000, 432, 13, 1, 8}, + { 16800000, 216000000, 360, 14, 1, 8}, + { 19200000, 216000000, 360, 16, 1, 8}, + { 26000000, 216000000, 432, 26, 1, 8}, { 0, 0, 0, 0, 0, 0 }, }; static struct tegra_clk_pll_freq_table pll_a_freq_table[] = { - { 9600000, 564480000, 294, 5, 1, 4}, - { 9600000, 552960000, 288, 5, 1, 4}, - { 9600000, 24000000, 5, 2, 1, 1}, + { 9600000, 564480000, 294, 5, 0, 4}, + { 9600000, 552960000, 288, 5, 0, 4}, + { 9600000, 24000000, 5, 2, 0, 1}, - { 28800000, 56448000, 49, 25, 1, 1}, - { 28800000, 73728000, 64, 25, 1, 1}, - { 28800000, 24000000, 5, 6, 1, 1}, + { 28800000, 56448000, 49, 25, 0, 1}, + { 28800000, 73728000, 64, 25, 0, 1}, + { 28800000, 24000000, 5, 6, 0, 1}, { 0, 0, 0, 0, 0, 0 }, }; static struct tegra_clk_pll_freq_table pll_d_freq_table[] = { - { 12000000, 216000000, 216, 12, 1, 4}, - { 13000000, 216000000, 216, 13, 1, 4}, - { 16800000, 216000000, 180, 14, 1, 4}, - { 19200000, 216000000, 180, 16, 1, 4}, - { 26000000, 216000000, 216, 26, 1, 4}, - - { 12000000, 594000000, 594, 12, 1, 8}, - { 13000000, 594000000, 594, 13, 1, 8}, - { 16800000, 594000000, 495, 14, 1, 8}, - { 19200000, 594000000, 495, 16, 1, 8}, - { 26000000, 594000000, 594, 26, 1, 8}, - - { 12000000, 1000000000, 1000, 12, 1, 12}, - { 13000000, 1000000000, 1000, 13, 1, 12}, - { 19200000, 1000000000, 625, 12, 1, 8}, - { 26000000, 1000000000, 1000, 26, 1, 12}, + { 12000000, 216000000, 216, 12, 0, 4}, + { 13000000, 216000000, 216, 13, 0, 4}, + { 16800000, 216000000, 180, 14, 0, 4}, + { 19200000, 216000000, 180, 16, 0, 4}, + { 26000000, 216000000, 216, 26, 0, 4}, + + { 12000000, 594000000, 594, 12, 0, 8}, + { 13000000, 594000000, 594, 13, 0, 8}, + { 16800000, 594000000, 495, 14, 0, 8}, + { 19200000, 594000000, 495, 16, 0, 8}, + { 26000000, 594000000, 594, 26, 0, 8}, + + { 12000000, 1000000000, 1000, 12, 0, 12}, + { 13000000, 1000000000, 1000, 13, 0, 12}, + { 19200000, 1000000000, 625, 12, 0, 8}, + { 26000000, 1000000000, 1000, 26, 0, 12}, { 0, 0, 0, 0, 0, 0 }, }; +static struct pdiv_map pllu_p[] = { + { .pdiv = 1, .hw_val = 1 }, + { .pdiv = 2, .hw_val = 0 }, + { .pdiv = 0, .hw_val = 0 }, +}; + static struct tegra_clk_pll_freq_table pll_u_freq_table[] = { - { 12000000, 480000000, 960, 12, 2, 12}, - { 13000000, 480000000, 960, 13, 2, 12}, - { 16800000, 480000000, 400, 7, 2, 5}, - { 19200000, 480000000, 200, 4, 2, 3}, - { 26000000, 480000000, 960, 26, 2, 12}, + { 12000000, 480000000, 960, 12, 0, 12}, + { 13000000, 480000000, 960, 13, 0, 12}, + { 16800000, 480000000, 400, 7, 0, 5}, + { 19200000, 480000000, 200, 4, 0, 3}, + { 26000000, 480000000, 960, 26, 0, 12}, { 0, 0, 0, 0, 0, 0 }, }; static struct tegra_clk_pll_freq_table pll_x_freq_table[] = { /* 1.7 GHz */ - { 12000000, 1700000000, 850, 6, 1, 8}, - { 13000000, 1700000000, 915, 7, 1, 8}, /* actual: 1699.2 MHz */ - { 16800000, 1700000000, 708, 7, 1, 8}, /* actual: 1699.2 MHz */ - { 19200000, 1700000000, 885, 10, 1, 8}, /* actual: 1699.2 MHz */ - { 26000000, 1700000000, 850, 13, 1, 8}, + { 12000000, 1700000000, 850, 6, 0, 8}, + { 13000000, 1700000000, 915, 7, 0, 8}, /* actual: 1699.2 MHz */ + { 16800000, 1700000000, 708, 7, 0, 8}, /* actual: 1699.2 MHz */ + { 19200000, 1700000000, 885, 10, 0, 8}, /* actual: 1699.2 MHz */ + { 26000000, 1700000000, 850, 13, 0, 8}, /* 1.6 GHz */ - { 12000000, 1600000000, 800, 6, 1, 8}, - { 13000000, 1600000000, 738, 6, 1, 8}, /* actual: 1599.0 MHz */ - { 16800000, 1600000000, 857, 9, 1, 8}, /* actual: 1599.7 MHz */ - { 19200000, 1600000000, 500, 6, 1, 8}, - { 26000000, 1600000000, 800, 13, 1, 8}, + { 12000000, 1600000000, 800, 6, 0, 8}, + { 13000000, 1600000000, 738, 6, 0, 8}, /* actual: 1599.0 MHz */ + { 16800000, 1600000000, 857, 9, 0, 8}, /* actual: 1599.7 MHz */ + { 19200000, 1600000000, 500, 6, 0, 8}, + { 26000000, 1600000000, 800, 13, 0, 8}, /* 1.5 GHz */ - { 12000000, 1500000000, 750, 6, 1, 8}, - { 13000000, 1500000000, 923, 8, 1, 8}, /* actual: 1499.8 MHz */ - { 16800000, 1500000000, 625, 7, 1, 8}, - { 19200000, 1500000000, 625, 8, 1, 8}, - { 26000000, 1500000000, 750, 13, 1, 8}, + { 12000000, 1500000000, 750, 6, 0, 8}, + { 13000000, 1500000000, 923, 8, 0, 8}, /* actual: 1499.8 MHz */ + { 16800000, 1500000000, 625, 7, 0, 8}, + { 19200000, 1500000000, 625, 8, 0, 8}, + { 26000000, 1500000000, 750, 13, 0, 8}, /* 1.4 GHz */ - { 12000000, 1400000000, 700, 6, 1, 8}, - { 13000000, 1400000000, 969, 9, 1, 8}, /* actual: 1399.7 MHz */ - { 16800000, 1400000000, 1000, 12, 1, 8}, - { 19200000, 1400000000, 875, 12, 1, 8}, - { 26000000, 1400000000, 700, 13, 1, 8}, + { 12000000, 1400000000, 700, 6, 0, 8}, + { 13000000, 1400000000, 969, 9, 0, 8}, /* actual: 1399.7 MHz */ + { 16800000, 1400000000, 1000, 12, 0, 8}, + { 19200000, 1400000000, 875, 12, 0, 8}, + { 26000000, 1400000000, 700, 13, 0, 8}, /* 1.3 GHz */ - { 12000000, 1300000000, 975, 9, 1, 8}, - { 13000000, 1300000000, 1000, 10, 1, 8}, - { 16800000, 1300000000, 928, 12, 1, 8}, /* actual: 1299.2 MHz */ - { 19200000, 1300000000, 812, 12, 1, 8}, /* actual: 1299.2 MHz */ - { 26000000, 1300000000, 650, 13, 1, 8}, + { 12000000, 1300000000, 975, 9, 0, 8}, + { 13000000, 1300000000, 1000, 10, 0, 8}, + { 16800000, 1300000000, 928, 12, 0, 8}, /* actual: 1299.2 MHz */ + { 19200000, 1300000000, 812, 12, 0, 8}, /* actual: 1299.2 MHz */ + { 26000000, 1300000000, 650, 13, 0, 8}, /* 1.2 GHz */ - { 12000000, 1200000000, 1000, 10, 1, 8}, - { 13000000, 1200000000, 923, 10, 1, 8}, /* actual: 1199.9 MHz */ - { 16800000, 1200000000, 1000, 14, 1, 8}, - { 19200000, 1200000000, 1000, 16, 1, 8}, - { 26000000, 1200000000, 600, 13, 1, 8}, + { 12000000, 1200000000, 1000, 10, 0, 8}, + { 13000000, 1200000000, 923, 10, 0, 8}, /* actual: 1199.9 MHz */ + { 16800000, 1200000000, 1000, 14, 0, 8}, + { 19200000, 1200000000, 1000, 16, 0, 8}, + { 26000000, 1200000000, 600, 13, 0, 8}, /* 1.1 GHz */ - { 12000000, 1100000000, 825, 9, 1, 8}, - { 13000000, 1100000000, 846, 10, 1, 8}, /* actual: 1099.8 MHz */ - { 16800000, 1100000000, 982, 15, 1, 8}, /* actual: 1099.8 MHz */ - { 19200000, 1100000000, 859, 15, 1, 8}, /* actual: 1099.5 MHz */ - { 26000000, 1100000000, 550, 13, 1, 8}, + { 12000000, 1100000000, 825, 9, 0, 8}, + { 13000000, 1100000000, 846, 10, 0, 8}, /* actual: 1099.8 MHz */ + { 16800000, 1100000000, 982, 15, 0, 8}, /* actual: 1099.8 MHz */ + { 19200000, 1100000000, 859, 15, 0, 8}, /* actual: 1099.5 MHz */ + { 26000000, 1100000000, 550, 13, 0, 8}, /* 1 GHz */ - { 12000000, 1000000000, 1000, 12, 1, 8}, - { 13000000, 1000000000, 1000, 13, 1, 8}, - { 16800000, 1000000000, 833, 14, 1, 8}, /* actual: 999.6 MHz */ - { 19200000, 1000000000, 625, 12, 1, 8}, - { 26000000, 1000000000, 1000, 26, 1, 8}, + { 12000000, 1000000000, 1000, 12, 0, 8}, + { 13000000, 1000000000, 1000, 13, 0, 8}, + { 16800000, 1000000000, 833, 14, 0, 8}, /* actual: 999.6 MHz */ + { 19200000, 1000000000, 625, 12, 0, 8}, + { 26000000, 1000000000, 1000, 26, 0, 8}, { 0, 0, 0, 0, 0, 0 }, }; @@ -553,7 +559,7 @@ static struct tegra_clk_pll_params pll_c_params = { .vco_max = 1400000000, .base_reg = PLLC_BASE, .misc_reg = PLLC_MISC, - .lock_bit_idx = PLL_BASE_LOCK, + .lock_mask = PLL_BASE_LOCK, .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE, .lock_delay = 300, }; @@ -567,7 +573,7 @@ static struct tegra_clk_pll_params pll_m_params = { .vco_max = 1200000000, .base_reg = PLLM_BASE, .misc_reg = PLLM_MISC, - .lock_bit_idx = PLL_BASE_LOCK, + .lock_mask = PLL_BASE_LOCK, .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE, .lock_delay = 300, }; @@ -581,7 +587,7 @@ static struct tegra_clk_pll_params pll_p_params = { .vco_max = 1400000000, .base_reg = PLLP_BASE, .misc_reg = PLLP_MISC, - .lock_bit_idx = PLL_BASE_LOCK, + .lock_mask = PLL_BASE_LOCK, .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE, .lock_delay = 300, }; @@ -595,7 +601,7 @@ static struct tegra_clk_pll_params pll_a_params = { .vco_max = 1400000000, .base_reg = PLLA_BASE, .misc_reg = PLLA_MISC, - .lock_bit_idx = PLL_BASE_LOCK, + .lock_mask = PLL_BASE_LOCK, .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE, .lock_delay = 300, }; @@ -609,7 +615,7 @@ static struct tegra_clk_pll_params pll_d_params = { .vco_max = 1000000000, .base_reg = PLLD_BASE, .misc_reg = PLLD_MISC, - .lock_bit_idx = PLL_BASE_LOCK, + .lock_mask = PLL_BASE_LOCK, .lock_enable_bit_idx = PLLDU_MISC_LOCK_ENABLE, .lock_delay = 1000, }; @@ -623,7 +629,7 @@ static struct tegra_clk_pll_params pll_d2_params = { .vco_max = 1000000000, .base_reg = PLLD2_BASE, .misc_reg = PLLD2_MISC, - .lock_bit_idx = PLL_BASE_LOCK, + .lock_mask = PLL_BASE_LOCK, .lock_enable_bit_idx = PLLDU_MISC_LOCK_ENABLE, .lock_delay = 1000, }; @@ -637,9 +643,10 @@ static struct tegra_clk_pll_params pll_u_params = { .vco_max = 960000000, .base_reg = PLLU_BASE, .misc_reg = PLLU_MISC, - .lock_bit_idx = PLL_BASE_LOCK, + .lock_mask = PLL_BASE_LOCK, .lock_enable_bit_idx = PLLDU_MISC_LOCK_ENABLE, .lock_delay = 1000, + .pdiv_tohw = pllu_p, }; static struct tegra_clk_pll_params pll_x_params = { @@ -651,7 +658,7 @@ static struct tegra_clk_pll_params pll_x_params = { .vco_max = 1700000000, .base_reg = PLLX_BASE, .misc_reg = PLLX_MISC, - .lock_bit_idx = PLL_BASE_LOCK, + .lock_mask = PLL_BASE_LOCK, .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE, .lock_delay = 300, }; @@ -665,7 +672,7 @@ static struct tegra_clk_pll_params pll_e_params = { .vco_max = 2400000000U, .base_reg = PLLE_BASE, .misc_reg = PLLE_MISC, - .lock_bit_idx = PLLE_MISC_LOCK, + .lock_mask = PLLE_MISC_LOCK, .lock_enable_bit_idx = PLLE_MISC_LOCK_ENABLE, .lock_delay = 300, }; @@ -1661,7 +1668,7 @@ static void __init tegra30_periph_clk_init(void) data = &tegra_periph_clk_list[i]; clk = tegra_clk_register_periph(data->name, data->parent_names, data->num_parents, &data->periph, - clk_base, data->offset); + clk_base, data->offset, data->flags); clk_register_clkdev(clk, data->con_id, data->dev_id); clks[data->clk_id] = clk; } @@ -1911,9 +1918,16 @@ static __initdata struct tegra_clk_init_table init_table[] = { {disp1, pll_p, 600000000, 0}, {disp2, pll_p, 600000000, 0}, {twd, clk_max, 0, 1}, + {gr2d, pll_c, 300000000, 0}, + {gr3d, pll_c, 300000000, 0}, {clk_max, clk_max, 0, 0}, /* This MUST be the last entry. */ }; +static void __init tegra30_clock_apply_init_table(void) +{ + tegra_init_from_table(init_table, clks, clk_max); +} + /* * Some clocks may be used by different drivers depending on the board * configuration. List those here to register them twice in the clock lookup @@ -1987,7 +2001,7 @@ void __init tegra30_clock_init(struct device_node *np) clk_data.clk_num = ARRAY_SIZE(clks); of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); - tegra_init_from_table(init_table, clks, clk_max); + tegra_clk_apply_init_table = tegra30_clock_apply_init_table; tegra_cpu_car_ops = &tegra30_cpu_car_ops; } diff --git a/drivers/clk/tegra/clk.c b/drivers/clk/tegra/clk.c index a603b9a..923ca7e 100644 --- a/drivers/clk/tegra/clk.c +++ b/drivers/clk/tegra/clk.c @@ -22,7 +22,8 @@ #include "clk.h" /* Global data of Tegra CPU CAR ops */ -struct tegra_cpu_car_ops *tegra_cpu_car_ops; +static struct tegra_cpu_car_ops dummy_car_ops; +struct tegra_cpu_car_ops *tegra_cpu_car_ops = &dummy_car_ops; void __init tegra_init_dup_clks(struct tegra_clk_duplicate *dup_list, struct clk *clks[], int clk_max) @@ -76,6 +77,7 @@ void __init tegra_init_from_table(struct tegra_clk_init_table *tbl, static const struct of_device_id tegra_dt_clk_match[] = { { .compatible = "nvidia,tegra20-car", .data = tegra20_clock_init }, { .compatible = "nvidia,tegra30-car", .data = tegra30_clock_init }, + { .compatible = "nvidia,tegra114-car", .data = tegra114_clock_init }, { } }; @@ -83,3 +85,13 @@ void __init tegra_clocks_init(void) { of_clk_init(tegra_dt_clk_match); } + +tegra_clk_apply_init_table_func tegra_clk_apply_init_table; + +void __init tegra_clocks_apply_init_table(void) +{ + if (!tegra_clk_apply_init_table) + return; + + tegra_clk_apply_init_table(); +} diff --git a/drivers/clk/tegra/clk.h b/drivers/clk/tegra/clk.h index 0744731..e056562 100644 --- a/drivers/clk/tegra/clk.h +++ b/drivers/clk/tegra/clk.h @@ -1,4 +1,4 @@ -/* + /* * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved. * * This program is free software; you can redistribute it and/or modify it @@ -117,6 +117,17 @@ struct tegra_clk_pll_freq_table { }; /** + * struct pdiv_map - map post divider to hw value + * + * @pdiv: post divider + * @hw_val: value to be written to the PLL hw + */ +struct pdiv_map { + u8 pdiv; + u8 hw_val; +}; + +/** * struct clk_pll_params - PLL parameters * * @input_min: Minimum input frequency @@ -143,9 +154,18 @@ struct tegra_clk_pll_params { u32 base_reg; u32 misc_reg; u32 lock_reg; - u32 lock_bit_idx; + u32 lock_mask; u32 lock_enable_bit_idx; + u32 iddq_reg; + u32 iddq_bit_idx; + u32 aux_reg; + u32 dyn_ramp_reg; + u32 ext_misc_reg[3]; + int stepa_shift; + int stepb_shift; int lock_delay; + int max_p; + struct pdiv_map *pdiv_tohw; }; /** @@ -182,12 +202,16 @@ struct tegra_clk_pll_params { * TEGRA_PLL_FIXED - We are not supposed to change output frequency * of some plls. * TEGRA_PLLE_CONFIGURE - Configure PLLE when enabling. + * TEGRA_PLL_LOCK_MISC - Lock bit is in the misc register instead of the + * base register. + * TEGRA_PLL_BYPASS - PLL has bypass bit + * TEGRA_PLL_HAS_LOCK_ENABLE - PLL has bit to enable lock monitoring */ struct tegra_clk_pll { struct clk_hw hw; void __iomem *clk_base; void __iomem *pmc; - u8 flags; + u32 flags; unsigned long fixed_rate; spinlock_t *lock; u8 divn_shift; @@ -210,20 +234,64 @@ struct tegra_clk_pll { #define TEGRA_PLLM BIT(5) #define TEGRA_PLL_FIXED BIT(6) #define TEGRA_PLLE_CONFIGURE BIT(7) +#define TEGRA_PLL_LOCK_MISC BIT(8) +#define TEGRA_PLL_BYPASS BIT(9) +#define TEGRA_PLL_HAS_LOCK_ENABLE BIT(10) extern const struct clk_ops tegra_clk_pll_ops; extern const struct clk_ops tegra_clk_plle_ops; struct clk *tegra_clk_register_pll(const char *name, const char *parent_name, void __iomem *clk_base, void __iomem *pmc, unsigned long flags, unsigned long fixed_rate, - struct tegra_clk_pll_params *pll_params, u8 pll_flags, + struct tegra_clk_pll_params *pll_params, u32 pll_flags, struct tegra_clk_pll_freq_table *freq_table, spinlock_t *lock); + struct clk *tegra_clk_register_plle(const char *name, const char *parent_name, void __iomem *clk_base, void __iomem *pmc, unsigned long flags, unsigned long fixed_rate, - struct tegra_clk_pll_params *pll_params, u8 pll_flags, + struct tegra_clk_pll_params *pll_params, u32 pll_flags, struct tegra_clk_pll_freq_table *freq_table, spinlock_t *lock); +struct clk *tegra_clk_register_pllxc(const char *name, const char *parent_name, + void __iomem *clk_base, void __iomem *pmc, + unsigned long flags, unsigned long fixed_rate, + struct tegra_clk_pll_params *pll_params, + u32 pll_flags, + struct tegra_clk_pll_freq_table *freq_table, + spinlock_t *lock); + +struct clk *tegra_clk_register_pllm(const char *name, const char *parent_name, + void __iomem *clk_base, void __iomem *pmc, + unsigned long flags, unsigned long fixed_rate, + struct tegra_clk_pll_params *pll_params, + u32 pll_flags, + struct tegra_clk_pll_freq_table *freq_table, + spinlock_t *lock); + +struct clk *tegra_clk_register_pllc(const char *name, const char *parent_name, + void __iomem *clk_base, void __iomem *pmc, + unsigned long flags, unsigned long fixed_rate, + struct tegra_clk_pll_params *pll_params, + u32 pll_flags, + struct tegra_clk_pll_freq_table *freq_table, + spinlock_t *lock); + +struct clk *tegra_clk_register_pllre(const char *name, const char *parent_name, + void __iomem *clk_base, void __iomem *pmc, + unsigned long flags, unsigned long fixed_rate, + struct tegra_clk_pll_params *pll_params, + u32 pll_flags, + struct tegra_clk_pll_freq_table *freq_table, + spinlock_t *lock, unsigned long parent_rate); + +struct clk *tegra_clk_register_plle_tegra114(const char *name, + const char *parent_name, + void __iomem *clk_base, unsigned long flags, + unsigned long fixed_rate, + struct tegra_clk_pll_params *pll_params, + struct tegra_clk_pll_freq_table *freq_table, + spinlock_t *lock); + /** * struct tegra_clk_pll_out - PLL divider down clock * @@ -290,6 +358,7 @@ struct tegra_clk_periph_regs { * TEGRA_PERIPH_ON_APB - If peripheral is in the APB bus then read the * bus to flush the write operation in apb bus. This flag indicates * that this peripheral is in apb bus. + * TEGRA_PERIPH_WAR_1005168 - Apply workaround for Tegra114 MSENC bug */ struct tegra_clk_periph_gate { u32 magic; @@ -309,6 +378,7 @@ struct tegra_clk_periph_gate { #define TEGRA_PERIPH_NO_RESET BIT(0) #define TEGRA_PERIPH_MANUAL_RESET BIT(1) #define TEGRA_PERIPH_ON_APB BIT(2) +#define TEGRA_PERIPH_WAR_1005168 BIT(3) void tegra_periph_reset(struct tegra_clk_periph_gate *gate, bool assert); extern const struct clk_ops tegra_clk_periph_gate_ops; @@ -349,21 +419,22 @@ extern const struct clk_ops tegra_clk_periph_ops; struct clk *tegra_clk_register_periph(const char *name, const char **parent_names, int num_parents, struct tegra_clk_periph *periph, void __iomem *clk_base, - u32 offset); + u32 offset, unsigned long flags); struct clk *tegra_clk_register_periph_nodiv(const char *name, const char **parent_names, int num_parents, struct tegra_clk_periph *periph, void __iomem *clk_base, u32 offset); -#define TEGRA_CLK_PERIPH(_mux_shift, _mux_width, _mux_flags, \ +#define TEGRA_CLK_PERIPH(_mux_shift, _mux_mask, _mux_flags, \ _div_shift, _div_width, _div_frac_width, \ _div_flags, _clk_num, _enb_refcnt, _regs, \ - _gate_flags) \ + _gate_flags, _table) \ { \ .mux = { \ .flags = _mux_flags, \ .shift = _mux_shift, \ - .width = _mux_width, \ + .mask = _mux_mask, \ + .table = _table, \ }, \ .divider = { \ .flags = _div_flags, \ @@ -391,28 +462,41 @@ struct tegra_periph_init_data { u32 offset; const char *con_id; const char *dev_id; + unsigned long flags; }; -#define TEGRA_INIT_DATA(_name, _con_id, _dev_id, _parent_names, _offset, \ - _mux_shift, _mux_width, _mux_flags, _div_shift, \ +#define TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parent_names, _offset,\ + _mux_shift, _mux_mask, _mux_flags, _div_shift, \ _div_width, _div_frac_width, _div_flags, _regs, \ - _clk_num, _enb_refcnt, _gate_flags, _clk_id) \ + _clk_num, _enb_refcnt, _gate_flags, _clk_id, _table,\ + _flags) \ { \ .name = _name, \ .clk_id = _clk_id, \ .parent_names = _parent_names, \ .num_parents = ARRAY_SIZE(_parent_names), \ - .periph = TEGRA_CLK_PERIPH(_mux_shift, _mux_width, \ + .periph = TEGRA_CLK_PERIPH(_mux_shift, _mux_mask, \ _mux_flags, _div_shift, \ _div_width, _div_frac_width, \ _div_flags, _clk_num, \ _enb_refcnt, _regs, \ - _gate_flags), \ + _gate_flags, _table), \ .offset = _offset, \ .con_id = _con_id, \ .dev_id = _dev_id, \ + .flags = _flags \ } +#define TEGRA_INIT_DATA(_name, _con_id, _dev_id, _parent_names, _offset,\ + _mux_shift, _mux_width, _mux_flags, _div_shift, \ + _div_width, _div_frac_width, _div_flags, _regs, \ + _clk_num, _enb_refcnt, _gate_flags, _clk_id) \ + TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parent_names, _offset,\ + _mux_shift, BIT(_mux_width) - 1, _mux_flags, \ + _div_shift, _div_width, _div_frac_width, _div_flags, \ + _regs, _clk_num, _enb_refcnt, _gate_flags, _clk_id,\ + NULL, 0) + /** * struct clk_super_mux - super clock * @@ -499,4 +583,13 @@ void tegra30_clock_init(struct device_node *np); static inline void tegra30_clock_init(struct device_node *np) {} #endif /* CONFIG_ARCH_TEGRA_3x_SOC */ +#ifdef CONFIG_ARCH_TEGRA_114_SOC +void tegra114_clock_init(struct device_node *np); +#else +static inline void tegra114_clock_init(struct device_node *np) {} +#endif /* CONFIG_ARCH_TEGRA114_SOC */ + +typedef void (*tegra_clk_apply_init_table_func)(void); +extern tegra_clk_apply_init_table_func tegra_clk_apply_init_table; + #endif /* TEGRA_CLK_H */ diff --git a/drivers/clk/ux500/clk-prcmu.c b/drivers/clk/ux500/clk-prcmu.c index 74faa7e..293a288 100644 --- a/drivers/clk/ux500/clk-prcmu.c +++ b/drivers/clk/ux500/clk-prcmu.c @@ -20,15 +20,23 @@ struct clk_prcmu { struct clk_hw hw; u8 cg_sel; + int is_prepared; int is_enabled; + int opp_requested; }; /* PRCMU clock operations. */ static int clk_prcmu_prepare(struct clk_hw *hw) { + int ret; struct clk_prcmu *clk = to_clk_prcmu(hw); - return prcmu_request_clock(clk->cg_sel, true); + + ret = prcmu_request_clock(clk->cg_sel, true); + if (!ret) + clk->is_prepared = 1; + + return ret;; } static void clk_prcmu_unprepare(struct clk_hw *hw) @@ -36,7 +44,15 @@ static void clk_prcmu_unprepare(struct clk_hw *hw) struct clk_prcmu *clk = to_clk_prcmu(hw); if (prcmu_request_clock(clk->cg_sel, false)) pr_err("clk_prcmu: %s failed to disable %s.\n", __func__, - hw->init->name); + __clk_get_name(hw->clk)); + else + clk->is_prepared = 0; +} + +static int clk_prcmu_is_prepared(struct clk_hw *hw) +{ + struct clk_prcmu *clk = to_clk_prcmu(hw); + return clk->is_prepared; } static int clk_prcmu_enable(struct clk_hw *hw) @@ -79,58 +95,52 @@ static int clk_prcmu_set_rate(struct clk_hw *hw, unsigned long rate, return prcmu_set_clock_rate(clk->cg_sel, rate); } -static int request_ape_opp100(bool enable) -{ - static int reqs; - int err = 0; - - if (enable) { - if (!reqs) - err = prcmu_qos_add_requirement(PRCMU_QOS_APE_OPP, - "clock", 100); - if (!err) - reqs++; - } else { - reqs--; - if (!reqs) - prcmu_qos_remove_requirement(PRCMU_QOS_APE_OPP, - "clock"); - } - return err; -} - static int clk_prcmu_opp_prepare(struct clk_hw *hw) { int err; struct clk_prcmu *clk = to_clk_prcmu(hw); - err = request_ape_opp100(true); - if (err) { - pr_err("clk_prcmu: %s failed to request APE OPP100 for %s.\n", - __func__, hw->init->name); - return err; + if (!clk->opp_requested) { + err = prcmu_qos_add_requirement(PRCMU_QOS_APE_OPP, + (char *)__clk_get_name(hw->clk), + 100); + if (err) { + pr_err("clk_prcmu: %s fail req APE OPP for %s.\n", + __func__, __clk_get_name(hw->clk)); + return err; + } + clk->opp_requested = 1; } err = prcmu_request_clock(clk->cg_sel, true); - if (err) - request_ape_opp100(false); + if (err) { + prcmu_qos_remove_requirement(PRCMU_QOS_APE_OPP, + (char *)__clk_get_name(hw->clk)); + clk->opp_requested = 0; + return err; + } - return err; + clk->is_prepared = 1; + return 0; } static void clk_prcmu_opp_unprepare(struct clk_hw *hw) { struct clk_prcmu *clk = to_clk_prcmu(hw); - if (prcmu_request_clock(clk->cg_sel, false)) - goto out_error; - if (request_ape_opp100(false)) - goto out_error; - return; - -out_error: - pr_err("clk_prcmu: %s failed to disable %s.\n", __func__, - hw->init->name); + if (prcmu_request_clock(clk->cg_sel, false)) { + pr_err("clk_prcmu: %s failed to disable %s.\n", __func__, + __clk_get_name(hw->clk)); + return; + } + + if (clk->opp_requested) { + prcmu_qos_remove_requirement(PRCMU_QOS_APE_OPP, + (char *)__clk_get_name(hw->clk)); + clk->opp_requested = 0; + } + + clk->is_prepared = 0; } static int clk_prcmu_opp_volt_prepare(struct clk_hw *hw) @@ -138,38 +148,49 @@ static int clk_prcmu_opp_volt_prepare(struct clk_hw *hw) int err; struct clk_prcmu *clk = to_clk_prcmu(hw); - err = prcmu_request_ape_opp_100_voltage(true); - if (err) { - pr_err("clk_prcmu: %s failed to request APE OPP VOLT for %s.\n", - __func__, hw->init->name); - return err; + if (!clk->opp_requested) { + err = prcmu_request_ape_opp_100_voltage(true); + if (err) { + pr_err("clk_prcmu: %s fail req APE OPP VOLT for %s.\n", + __func__, __clk_get_name(hw->clk)); + return err; + } + clk->opp_requested = 1; } err = prcmu_request_clock(clk->cg_sel, true); - if (err) + if (err) { prcmu_request_ape_opp_100_voltage(false); + clk->opp_requested = 0; + return err; + } - return err; + clk->is_prepared = 1; + return 0; } static void clk_prcmu_opp_volt_unprepare(struct clk_hw *hw) { struct clk_prcmu *clk = to_clk_prcmu(hw); - if (prcmu_request_clock(clk->cg_sel, false)) - goto out_error; - if (prcmu_request_ape_opp_100_voltage(false)) - goto out_error; - return; - -out_error: - pr_err("clk_prcmu: %s failed to disable %s.\n", __func__, - hw->init->name); + if (prcmu_request_clock(clk->cg_sel, false)) { + pr_err("clk_prcmu: %s failed to disable %s.\n", __func__, + __clk_get_name(hw->clk)); + return; + } + + if (clk->opp_requested) { + prcmu_request_ape_opp_100_voltage(false); + clk->opp_requested = 0; + } + + clk->is_prepared = 0; } static struct clk_ops clk_prcmu_scalable_ops = { .prepare = clk_prcmu_prepare, .unprepare = clk_prcmu_unprepare, + .is_prepared = clk_prcmu_is_prepared, .enable = clk_prcmu_enable, .disable = clk_prcmu_disable, .is_enabled = clk_prcmu_is_enabled, @@ -181,6 +202,7 @@ static struct clk_ops clk_prcmu_scalable_ops = { static struct clk_ops clk_prcmu_gate_ops = { .prepare = clk_prcmu_prepare, .unprepare = clk_prcmu_unprepare, + .is_prepared = clk_prcmu_is_prepared, .enable = clk_prcmu_enable, .disable = clk_prcmu_disable, .is_enabled = clk_prcmu_is_enabled, @@ -202,6 +224,7 @@ static struct clk_ops clk_prcmu_rate_ops = { static struct clk_ops clk_prcmu_opp_gate_ops = { .prepare = clk_prcmu_opp_prepare, .unprepare = clk_prcmu_opp_unprepare, + .is_prepared = clk_prcmu_is_prepared, .enable = clk_prcmu_enable, .disable = clk_prcmu_disable, .is_enabled = clk_prcmu_is_enabled, @@ -211,6 +234,7 @@ static struct clk_ops clk_prcmu_opp_gate_ops = { static struct clk_ops clk_prcmu_opp_volt_scalable_ops = { .prepare = clk_prcmu_opp_volt_prepare, .unprepare = clk_prcmu_opp_volt_unprepare, + .is_prepared = clk_prcmu_is_prepared, .enable = clk_prcmu_enable, .disable = clk_prcmu_disable, .is_enabled = clk_prcmu_is_enabled, @@ -242,7 +266,9 @@ static struct clk *clk_reg_prcmu(const char *name, } clk->cg_sel = cg_sel; + clk->is_prepared = 1; clk->is_enabled = 1; + clk->opp_requested = 0; /* "rate" can be used for changing the initial frequency */ if (rate) prcmu_set_clock_rate(cg_sel, rate); diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index e8c4532..73fcddb 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -31,6 +31,9 @@ config SUNXI_TIMER config VT8500_TIMER bool +config CADENCE_TTC_TIMER + bool + config CLKSRC_NOMADIK_MTU bool depends on (ARCH_NOMADIK || ARCH_U8500) diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index 1c1b15d..cd1f09c 100644 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -19,6 +19,7 @@ obj-$(CONFIG_ARCH_BCM2835) += bcm2835_timer.o obj-$(CONFIG_SUNXI_TIMER) += sunxi_timer.o obj-$(CONFIG_ARCH_TEGRA) += tegra20_timer.o obj-$(CONFIG_VT8500_TIMER) += vt8500_timer.o +obj-$(CONFIG_CADENCE_TTC_TIMER) += cadence_ttc_timer.o obj-$(CONFIG_CLKSRC_EXYNOS_MCT) += exynos_mct.o obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o diff --git a/drivers/clocksource/bcm2835_timer.c b/drivers/clocksource/bcm2835_timer.c index 50c68fe..766611d 100644 --- a/drivers/clocksource/bcm2835_timer.c +++ b/drivers/clocksource/bcm2835_timer.c @@ -95,23 +95,13 @@ static irqreturn_t bcm2835_time_interrupt(int irq, void *dev_id) } } -static struct of_device_id bcm2835_time_match[] __initconst = { - { .compatible = "brcm,bcm2835-system-timer" }, - {} -}; - -static void __init bcm2835_timer_init(void) +static void __init bcm2835_timer_init(struct device_node *node) { - struct device_node *node; void __iomem *base; u32 freq; int irq; struct bcm2835_timer *timer; - node = of_find_matching_node(NULL, bcm2835_time_match); - if (!node) - panic("No bcm2835 timer node"); - base = of_iomap(node, 0); if (!base) panic("Can't remap registers"); diff --git a/drivers/clocksource/cadence_ttc_timer.c b/drivers/clocksource/cadence_ttc_timer.c new file mode 100644 index 0000000..685bc60 --- /dev/null +++ b/drivers/clocksource/cadence_ttc_timer.c @@ -0,0 +1,436 @@ +/* + * This file contains driver for the Cadence Triple Timer Counter Rev 06 + * + * Copyright (C) 2011-2013 Xilinx + * + * based on arch/mips/kernel/time.c timer driver + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/clk.h> +#include <linux/interrupt.h> +#include <linux/clockchips.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/slab.h> +#include <linux/clk-provider.h> + +/* + * This driver configures the 2 16-bit count-up timers as follows: + * + * T1: Timer 1, clocksource for generic timekeeping + * T2: Timer 2, clockevent source for hrtimers + * T3: Timer 3, <unused> + * + * The input frequency to the timer module for emulation is 2.5MHz which is + * common to all the timer channels (T1, T2, and T3). With a pre-scaler of 32, + * the timers are clocked at 78.125KHz (12.8 us resolution). + + * The input frequency to the timer module in silicon is configurable and + * obtained from device tree. The pre-scaler of 32 is used. + */ + +/* + * Timer Register Offset Definitions of Timer 1, Increment base address by 4 + * and use same offsets for Timer 2 + */ +#define TTC_CLK_CNTRL_OFFSET 0x00 /* Clock Control Reg, RW */ +#define TTC_CNT_CNTRL_OFFSET 0x0C /* Counter Control Reg, RW */ +#define TTC_COUNT_VAL_OFFSET 0x18 /* Counter Value Reg, RO */ +#define TTC_INTR_VAL_OFFSET 0x24 /* Interval Count Reg, RW */ +#define TTC_ISR_OFFSET 0x54 /* Interrupt Status Reg, RO */ +#define TTC_IER_OFFSET 0x60 /* Interrupt Enable Reg, RW */ + +#define TTC_CNT_CNTRL_DISABLE_MASK 0x1 + +/* + * Setup the timers to use pre-scaling, using a fixed value for now that will + * work across most input frequency, but it may need to be more dynamic + */ +#define PRESCALE_EXPONENT 11 /* 2 ^ PRESCALE_EXPONENT = PRESCALE */ +#define PRESCALE 2048 /* The exponent must match this */ +#define CLK_CNTRL_PRESCALE ((PRESCALE_EXPONENT - 1) << 1) +#define CLK_CNTRL_PRESCALE_EN 1 +#define CNT_CNTRL_RESET (1 << 4) + +/** + * struct ttc_timer - This definition defines local timer structure + * + * @base_addr: Base address of timer + * @clk: Associated clock source + * @clk_rate_change_nb Notifier block for clock rate changes + */ +struct ttc_timer { + void __iomem *base_addr; + struct clk *clk; + struct notifier_block clk_rate_change_nb; +}; + +#define to_ttc_timer(x) \ + container_of(x, struct ttc_timer, clk_rate_change_nb) + +struct ttc_timer_clocksource { + struct ttc_timer ttc; + struct clocksource cs; +}; + +#define to_ttc_timer_clksrc(x) \ + container_of(x, struct ttc_timer_clocksource, cs) + +struct ttc_timer_clockevent { + struct ttc_timer ttc; + struct clock_event_device ce; +}; + +#define to_ttc_timer_clkevent(x) \ + container_of(x, struct ttc_timer_clockevent, ce) + +/** + * ttc_set_interval - Set the timer interval value + * + * @timer: Pointer to the timer instance + * @cycles: Timer interval ticks + **/ +static void ttc_set_interval(struct ttc_timer *timer, + unsigned long cycles) +{ + u32 ctrl_reg; + + /* Disable the counter, set the counter value and re-enable counter */ + ctrl_reg = __raw_readl(timer->base_addr + TTC_CNT_CNTRL_OFFSET); + ctrl_reg |= TTC_CNT_CNTRL_DISABLE_MASK; + __raw_writel(ctrl_reg, timer->base_addr + TTC_CNT_CNTRL_OFFSET); + + __raw_writel(cycles, timer->base_addr + TTC_INTR_VAL_OFFSET); + + /* + * Reset the counter (0x10) so that it starts from 0, one-shot + * mode makes this needed for timing to be right. + */ + ctrl_reg |= CNT_CNTRL_RESET; + ctrl_reg &= ~TTC_CNT_CNTRL_DISABLE_MASK; + __raw_writel(ctrl_reg, timer->base_addr + TTC_CNT_CNTRL_OFFSET); +} + +/** + * ttc_clock_event_interrupt - Clock event timer interrupt handler + * + * @irq: IRQ number of the Timer + * @dev_id: void pointer to the ttc_timer instance + * + * returns: Always IRQ_HANDLED - success + **/ +static irqreturn_t ttc_clock_event_interrupt(int irq, void *dev_id) +{ + struct ttc_timer_clockevent *ttce = dev_id; + struct ttc_timer *timer = &ttce->ttc; + + /* Acknowledge the interrupt and call event handler */ + __raw_readl(timer->base_addr + TTC_ISR_OFFSET); + + ttce->ce.event_handler(&ttce->ce); + + return IRQ_HANDLED; +} + +/** + * __ttc_clocksource_read - Reads the timer counter register + * + * returns: Current timer counter register value + **/ +static cycle_t __ttc_clocksource_read(struct clocksource *cs) +{ + struct ttc_timer *timer = &to_ttc_timer_clksrc(cs)->ttc; + + return (cycle_t)__raw_readl(timer->base_addr + + TTC_COUNT_VAL_OFFSET); +} + +/** + * ttc_set_next_event - Sets the time interval for next event + * + * @cycles: Timer interval ticks + * @evt: Address of clock event instance + * + * returns: Always 0 - success + **/ +static int ttc_set_next_event(unsigned long cycles, + struct clock_event_device *evt) +{ + struct ttc_timer_clockevent *ttce = to_ttc_timer_clkevent(evt); + struct ttc_timer *timer = &ttce->ttc; + + ttc_set_interval(timer, cycles); + return 0; +} + +/** + * ttc_set_mode - Sets the mode of timer + * + * @mode: Mode to be set + * @evt: Address of clock event instance + **/ +static void ttc_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + struct ttc_timer_clockevent *ttce = to_ttc_timer_clkevent(evt); + struct ttc_timer *timer = &ttce->ttc; + u32 ctrl_reg; + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + ttc_set_interval(timer, + DIV_ROUND_CLOSEST(clk_get_rate(ttce->ttc.clk), + PRESCALE * HZ)); + break; + case CLOCK_EVT_MODE_ONESHOT: + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + ctrl_reg = __raw_readl(timer->base_addr + + TTC_CNT_CNTRL_OFFSET); + ctrl_reg |= TTC_CNT_CNTRL_DISABLE_MASK; + __raw_writel(ctrl_reg, + timer->base_addr + TTC_CNT_CNTRL_OFFSET); + break; + case CLOCK_EVT_MODE_RESUME: + ctrl_reg = __raw_readl(timer->base_addr + + TTC_CNT_CNTRL_OFFSET); + ctrl_reg &= ~TTC_CNT_CNTRL_DISABLE_MASK; + __raw_writel(ctrl_reg, + timer->base_addr + TTC_CNT_CNTRL_OFFSET); + break; + } +} + +static int ttc_rate_change_clocksource_cb(struct notifier_block *nb, + unsigned long event, void *data) +{ + struct clk_notifier_data *ndata = data; + struct ttc_timer *ttc = to_ttc_timer(nb); + struct ttc_timer_clocksource *ttccs = container_of(ttc, + struct ttc_timer_clocksource, ttc); + + switch (event) { + case POST_RATE_CHANGE: + /* + * Do whatever is necessary to maintain a proper time base + * + * I cannot find a way to adjust the currently used clocksource + * to the new frequency. __clocksource_updatefreq_hz() sounds + * good, but does not work. Not sure what's that missing. + * + * This approach works, but triggers two clocksource switches. + * The first after unregister to clocksource jiffies. And + * another one after the register to the newly registered timer. + * + * Alternatively we could 'waste' another HW timer to ping pong + * between clock sources. That would also use one register and + * one unregister call, but only trigger one clocksource switch + * for the cost of another HW timer used by the OS. + */ + clocksource_unregister(&ttccs->cs); + clocksource_register_hz(&ttccs->cs, + ndata->new_rate / PRESCALE); + /* fall through */ + case PRE_RATE_CHANGE: + case ABORT_RATE_CHANGE: + default: + return NOTIFY_DONE; + } +} + +static void __init ttc_setup_clocksource(struct clk *clk, void __iomem *base) +{ + struct ttc_timer_clocksource *ttccs; + int err; + + ttccs = kzalloc(sizeof(*ttccs), GFP_KERNEL); + if (WARN_ON(!ttccs)) + return; + + ttccs->ttc.clk = clk; + + err = clk_prepare_enable(ttccs->ttc.clk); + if (WARN_ON(err)) { + kfree(ttccs); + return; + } + + ttccs->ttc.clk_rate_change_nb.notifier_call = + ttc_rate_change_clocksource_cb; + ttccs->ttc.clk_rate_change_nb.next = NULL; + if (clk_notifier_register(ttccs->ttc.clk, + &ttccs->ttc.clk_rate_change_nb)) + pr_warn("Unable to register clock notifier.\n"); + + ttccs->ttc.base_addr = base; + ttccs->cs.name = "ttc_clocksource"; + ttccs->cs.rating = 200; + ttccs->cs.read = __ttc_clocksource_read; + ttccs->cs.mask = CLOCKSOURCE_MASK(16); + ttccs->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS; + + /* + * Setup the clock source counter to be an incrementing counter + * with no interrupt and it rolls over at 0xFFFF. Pre-scale + * it by 32 also. Let it start running now. + */ + __raw_writel(0x0, ttccs->ttc.base_addr + TTC_IER_OFFSET); + __raw_writel(CLK_CNTRL_PRESCALE | CLK_CNTRL_PRESCALE_EN, + ttccs->ttc.base_addr + TTC_CLK_CNTRL_OFFSET); + __raw_writel(CNT_CNTRL_RESET, + ttccs->ttc.base_addr + TTC_CNT_CNTRL_OFFSET); + + err = clocksource_register_hz(&ttccs->cs, + clk_get_rate(ttccs->ttc.clk) / PRESCALE); + if (WARN_ON(err)) { + kfree(ttccs); + return; + } +} + +static int ttc_rate_change_clockevent_cb(struct notifier_block *nb, + unsigned long event, void *data) +{ + struct clk_notifier_data *ndata = data; + struct ttc_timer *ttc = to_ttc_timer(nb); + struct ttc_timer_clockevent *ttcce = container_of(ttc, + struct ttc_timer_clockevent, ttc); + + switch (event) { + case POST_RATE_CHANGE: + { + unsigned long flags; + + /* + * clockevents_update_freq should be called with IRQ disabled on + * the CPU the timer provides events for. The timer we use is + * common to both CPUs, not sure if we need to run on both + * cores. + */ + local_irq_save(flags); + clockevents_update_freq(&ttcce->ce, + ndata->new_rate / PRESCALE); + local_irq_restore(flags); + + /* fall through */ + } + case PRE_RATE_CHANGE: + case ABORT_RATE_CHANGE: + default: + return NOTIFY_DONE; + } +} + +static void __init ttc_setup_clockevent(struct clk *clk, + void __iomem *base, u32 irq) +{ + struct ttc_timer_clockevent *ttcce; + int err; + + ttcce = kzalloc(sizeof(*ttcce), GFP_KERNEL); + if (WARN_ON(!ttcce)) + return; + + ttcce->ttc.clk = clk; + + err = clk_prepare_enable(ttcce->ttc.clk); + if (WARN_ON(err)) { + kfree(ttcce); + return; + } + + ttcce->ttc.clk_rate_change_nb.notifier_call = + ttc_rate_change_clockevent_cb; + ttcce->ttc.clk_rate_change_nb.next = NULL; + if (clk_notifier_register(ttcce->ttc.clk, + &ttcce->ttc.clk_rate_change_nb)) + pr_warn("Unable to register clock notifier.\n"); + + ttcce->ttc.base_addr = base; + ttcce->ce.name = "ttc_clockevent"; + ttcce->ce.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT; + ttcce->ce.set_next_event = ttc_set_next_event; + ttcce->ce.set_mode = ttc_set_mode; + ttcce->ce.rating = 200; + ttcce->ce.irq = irq; + ttcce->ce.cpumask = cpu_possible_mask; + + /* + * Setup the clock event timer to be an interval timer which + * is prescaled by 32 using the interval interrupt. Leave it + * disabled for now. + */ + __raw_writel(0x23, ttcce->ttc.base_addr + TTC_CNT_CNTRL_OFFSET); + __raw_writel(CLK_CNTRL_PRESCALE | CLK_CNTRL_PRESCALE_EN, + ttcce->ttc.base_addr + TTC_CLK_CNTRL_OFFSET); + __raw_writel(0x1, ttcce->ttc.base_addr + TTC_IER_OFFSET); + + err = request_irq(irq, ttc_clock_event_interrupt, + IRQF_DISABLED | IRQF_TIMER, + ttcce->ce.name, ttcce); + if (WARN_ON(err)) { + kfree(ttcce); + return; + } + + clockevents_config_and_register(&ttcce->ce, + clk_get_rate(ttcce->ttc.clk) / PRESCALE, 1, 0xfffe); +} + +/** + * ttc_timer_init - Initialize the timer + * + * Initializes the timer hardware and register the clock source and clock event + * timers with Linux kernal timer framework + */ +static void __init ttc_timer_init(struct device_node *timer) +{ + unsigned int irq; + void __iomem *timer_baseaddr; + struct clk *clk; + static int initialized; + + if (initialized) + return; + + initialized = 1; + + /* + * Get the 1st Triple Timer Counter (TTC) block from the device tree + * and use it. Note that the event timer uses the interrupt and it's the + * 2nd TTC hence the irq_of_parse_and_map(,1) + */ + timer_baseaddr = of_iomap(timer, 0); + if (!timer_baseaddr) { + pr_err("ERROR: invalid timer base address\n"); + BUG(); + } + + irq = irq_of_parse_and_map(timer, 1); + if (irq <= 0) { + pr_err("ERROR: invalid interrupt number\n"); + BUG(); + } + + clk = of_clk_get_by_name(timer, "cpu_1x"); + if (IS_ERR(clk)) { + pr_err("ERROR: timer input clock not found\n"); + BUG(); + } + + ttc_setup_clocksource(clk, timer_baseaddr); + ttc_setup_clockevent(clk, timer_baseaddr + 4, irq); + + pr_info("%s #0 at %p, irq=%d\n", timer->name, timer_baseaddr, irq); +} + +CLOCKSOURCE_OF_DECLARE(ttc, "cdns,ttc", ttc_timer_init); diff --git a/drivers/clocksource/clksrc-of.c b/drivers/clocksource/clksrc-of.c index bdabdaa..37f5325 100644 --- a/drivers/clocksource/clksrc-of.c +++ b/drivers/clocksource/clksrc-of.c @@ -16,6 +16,7 @@ #include <linux/init.h> #include <linux/of.h> +#include <linux/clocksource.h> extern struct of_device_id __clksrc_of_table[]; @@ -26,10 +27,10 @@ void __init clocksource_of_init(void) { struct device_node *np; const struct of_device_id *match; - void (*init_func)(void); + clocksource_of_init_fn init_func; for_each_matching_node_and_match(np, __clksrc_of_table, &match) { init_func = match->data; - init_func(); + init_func(np); } } diff --git a/drivers/clocksource/em_sti.c b/drivers/clocksource/em_sti.c index e6a553c..4329a29 100644 --- a/drivers/clocksource/em_sti.c +++ b/drivers/clocksource/em_sti.c @@ -399,7 +399,18 @@ static struct platform_driver em_sti_device_driver = { } }; -module_platform_driver(em_sti_device_driver); +static int __init em_sti_init(void) +{ + return platform_driver_register(&em_sti_device_driver); +} + +static void __exit em_sti_exit(void) +{ + platform_driver_unregister(&em_sti_device_driver); +} + +subsys_initcall(em_sti_init); +module_exit(em_sti_exit); MODULE_AUTHOR("Magnus Damm"); MODULE_DESCRIPTION("Renesas Emma Mobile STI Timer Driver"); diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c index 203ac05..509a601 100644 --- a/drivers/clocksource/exynos_mct.c +++ b/drivers/clocksource/exynos_mct.c @@ -477,7 +477,7 @@ static struct local_timer_ops exynos4_mct_tick_ops __cpuinitdata = { }; #endif /* CONFIG_LOCAL_TIMERS */ -static void __init exynos4_timer_resources(struct device_node *np) +static void __init exynos4_timer_resources(struct device_node *np, void __iomem *base) { struct clk *mct_clk, *tick_clk; @@ -492,7 +492,7 @@ static void __init exynos4_timer_resources(struct device_node *np) panic("%s: unable to retrieve mct clock instance\n", __func__); clk_prepare_enable(mct_clk); - reg_base = np ? of_iomap(np, 0) : S5P_VA_SYSTIMER; + reg_base = base; if (!reg_base) panic("%s: unable to ioremap mct address space\n", __func__); @@ -511,37 +511,9 @@ static void __init exynos4_timer_resources(struct device_node *np) #endif /* CONFIG_LOCAL_TIMERS */ } -static const struct of_device_id exynos_mct_ids[] = { - { .compatible = "samsung,exynos4210-mct", .data = (void *)MCT_INT_SPI }, - { .compatible = "samsung,exynos4412-mct", .data = (void *)MCT_INT_PPI }, -}; - void __init mct_init(void) { - struct device_node *np = NULL; - const struct of_device_id *match; - u32 nr_irqs, i; - -#ifdef CONFIG_OF - np = of_find_matching_node_and_match(NULL, exynos_mct_ids, &match); -#endif - if (np) { - mct_int_type = (u32)(match->data); - - /* This driver uses only one global timer interrupt */ - mct_irqs[MCT_G0_IRQ] = irq_of_parse_and_map(np, MCT_G0_IRQ); - - /* - * Find out the number of local irqs specified. The local - * timer irqs are specified after the four global timer - * irqs are specified. - */ -#ifdef CONFIG_OF - nr_irqs = of_irq_count(np); -#endif - for (i = MCT_L0_IRQ; i < nr_irqs; i++) - mct_irqs[i] = irq_of_parse_and_map(np, i); - } else if (soc_is_exynos4210()) { + if (soc_is_exynos4210()) { mct_irqs[MCT_G0_IRQ] = EXYNOS4_IRQ_MCT_G0; mct_irqs[MCT_L0_IRQ] = EXYNOS4_IRQ_MCT_L0; mct_irqs[MCT_L1_IRQ] = EXYNOS4_IRQ_MCT_L1; @@ -550,9 +522,43 @@ void __init mct_init(void) panic("unable to determine mct controller type\n"); } - exynos4_timer_resources(np); + exynos4_timer_resources(NULL, S5P_VA_SYSTIMER); exynos4_clocksource_init(); exynos4_clockevent_init(); } -CLOCKSOURCE_OF_DECLARE(exynos4210, "samsung,exynos4210-mct", mct_init) -CLOCKSOURCE_OF_DECLARE(exynos4412, "samsung,exynos4412-mct", mct_init) + +static void __init mct_init_dt(struct device_node *np, unsigned int int_type) +{ + u32 nr_irqs, i; + + mct_int_type = int_type; + + /* This driver uses only one global timer interrupt */ + mct_irqs[MCT_G0_IRQ] = irq_of_parse_and_map(np, MCT_G0_IRQ); + + /* + * Find out the number of local irqs specified. The local + * timer irqs are specified after the four global timer + * irqs are specified. + */ + nr_irqs = of_irq_count(np); + for (i = MCT_L0_IRQ; i < nr_irqs; i++) + mct_irqs[i] = irq_of_parse_and_map(np, i); + + exynos4_timer_resources(np, of_iomap(np, 0)); + exynos4_clocksource_init(); + exynos4_clockevent_init(); +} + + +static void __init mct_init_spi(struct device_node *np) +{ + return mct_init_dt(np, MCT_INT_SPI); +} + +static void __init mct_init_ppi(struct device_node *np) +{ + return mct_init_dt(np, MCT_INT_PPI); +} +CLOCKSOURCE_OF_DECLARE(exynos4210, "samsung,exynos4210-mct", mct_init_spi); +CLOCKSOURCE_OF_DECLARE(exynos4412, "samsung,exynos4412-mct", mct_init_ppi); diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c index 488c14c..08d0c41 100644 --- a/drivers/clocksource/sh_cmt.c +++ b/drivers/clocksource/sh_cmt.c @@ -54,62 +54,100 @@ struct sh_cmt_priv { struct clocksource cs; unsigned long total_cycles; bool cs_enabled; + + /* callbacks for CMSTR and CMCSR access */ + unsigned long (*read_control)(void __iomem *base, unsigned long offs); + void (*write_control)(void __iomem *base, unsigned long offs, + unsigned long value); + + /* callbacks for CMCNT and CMCOR access */ + unsigned long (*read_count)(void __iomem *base, unsigned long offs); + void (*write_count)(void __iomem *base, unsigned long offs, + unsigned long value); }; -static DEFINE_RAW_SPINLOCK(sh_cmt_lock); +/* Examples of supported CMT timer register layouts and I/O access widths: + * + * "16-bit counter and 16-bit control" as found on sh7263: + * CMSTR 0xfffec000 16-bit + * CMCSR 0xfffec002 16-bit + * CMCNT 0xfffec004 16-bit + * CMCOR 0xfffec006 16-bit + * + * "32-bit counter and 16-bit control" as found on sh7372, sh73a0, r8a7740: + * CMSTR 0xffca0000 16-bit + * CMCSR 0xffca0060 16-bit + * CMCNT 0xffca0064 32-bit + * CMCOR 0xffca0068 32-bit + */ + +static unsigned long sh_cmt_read16(void __iomem *base, unsigned long offs) +{ + return ioread16(base + (offs << 1)); +} + +static unsigned long sh_cmt_read32(void __iomem *base, unsigned long offs) +{ + return ioread32(base + (offs << 2)); +} + +static void sh_cmt_write16(void __iomem *base, unsigned long offs, + unsigned long value) +{ + iowrite16(value, base + (offs << 1)); +} + +static void sh_cmt_write32(void __iomem *base, unsigned long offs, + unsigned long value) +{ + iowrite32(value, base + (offs << 2)); +} -#define CMSTR -1 /* shared register */ #define CMCSR 0 /* channel register */ #define CMCNT 1 /* channel register */ #define CMCOR 2 /* channel register */ -static inline unsigned long sh_cmt_read(struct sh_cmt_priv *p, int reg_nr) +static inline unsigned long sh_cmt_read_cmstr(struct sh_cmt_priv *p) { struct sh_timer_config *cfg = p->pdev->dev.platform_data; - void __iomem *base = p->mapbase; - unsigned long offs; - - if (reg_nr == CMSTR) { - offs = 0; - base -= cfg->channel_offset; - } else - offs = reg_nr; - - if (p->width == 16) - offs <<= 1; - else { - offs <<= 2; - if ((reg_nr == CMCNT) || (reg_nr == CMCOR)) - return ioread32(base + offs); - } - return ioread16(base + offs); + return p->read_control(p->mapbase - cfg->channel_offset, 0); } -static inline void sh_cmt_write(struct sh_cmt_priv *p, int reg_nr, - unsigned long value) +static inline unsigned long sh_cmt_read_cmcsr(struct sh_cmt_priv *p) +{ + return p->read_control(p->mapbase, CMCSR); +} + +static inline unsigned long sh_cmt_read_cmcnt(struct sh_cmt_priv *p) +{ + return p->read_count(p->mapbase, CMCNT); +} + +static inline void sh_cmt_write_cmstr(struct sh_cmt_priv *p, + unsigned long value) { struct sh_timer_config *cfg = p->pdev->dev.platform_data; - void __iomem *base = p->mapbase; - unsigned long offs; - - if (reg_nr == CMSTR) { - offs = 0; - base -= cfg->channel_offset; - } else - offs = reg_nr; - - if (p->width == 16) - offs <<= 1; - else { - offs <<= 2; - if ((reg_nr == CMCNT) || (reg_nr == CMCOR)) { - iowrite32(value, base + offs); - return; - } - } - iowrite16(value, base + offs); + p->write_control(p->mapbase - cfg->channel_offset, 0, value); +} + +static inline void sh_cmt_write_cmcsr(struct sh_cmt_priv *p, + unsigned long value) +{ + p->write_control(p->mapbase, CMCSR, value); +} + +static inline void sh_cmt_write_cmcnt(struct sh_cmt_priv *p, + unsigned long value) +{ + p->write_count(p->mapbase, CMCNT, value); +} + +static inline void sh_cmt_write_cmcor(struct sh_cmt_priv *p, + unsigned long value) +{ + p->write_count(p->mapbase, CMCOR, value); } static unsigned long sh_cmt_get_counter(struct sh_cmt_priv *p, @@ -118,15 +156,15 @@ static unsigned long sh_cmt_get_counter(struct sh_cmt_priv *p, unsigned long v1, v2, v3; int o1, o2; - o1 = sh_cmt_read(p, CMCSR) & p->overflow_bit; + o1 = sh_cmt_read_cmcsr(p) & p->overflow_bit; /* Make sure the timer value is stable. Stolen from acpi_pm.c */ do { o2 = o1; - v1 = sh_cmt_read(p, CMCNT); - v2 = sh_cmt_read(p, CMCNT); - v3 = sh_cmt_read(p, CMCNT); - o1 = sh_cmt_read(p, CMCSR) & p->overflow_bit; + v1 = sh_cmt_read_cmcnt(p); + v2 = sh_cmt_read_cmcnt(p); + v3 = sh_cmt_read_cmcnt(p); + o1 = sh_cmt_read_cmcsr(p) & p->overflow_bit; } while (unlikely((o1 != o2) || (v1 > v2 && v1 < v3) || (v2 > v3 && v2 < v1) || (v3 > v1 && v3 < v2))); @@ -134,6 +172,7 @@ static unsigned long sh_cmt_get_counter(struct sh_cmt_priv *p, return v2; } +static DEFINE_RAW_SPINLOCK(sh_cmt_lock); static void sh_cmt_start_stop_ch(struct sh_cmt_priv *p, int start) { @@ -142,14 +181,14 @@ static void sh_cmt_start_stop_ch(struct sh_cmt_priv *p, int start) /* start stop register shared by multiple timer channels */ raw_spin_lock_irqsave(&sh_cmt_lock, flags); - value = sh_cmt_read(p, CMSTR); + value = sh_cmt_read_cmstr(p); if (start) value |= 1 << cfg->timer_bit; else value &= ~(1 << cfg->timer_bit); - sh_cmt_write(p, CMSTR, value); + sh_cmt_write_cmstr(p, value); raw_spin_unlock_irqrestore(&sh_cmt_lock, flags); } @@ -173,14 +212,14 @@ static int sh_cmt_enable(struct sh_cmt_priv *p, unsigned long *rate) /* configure channel, periodic mode and maximum timeout */ if (p->width == 16) { *rate = clk_get_rate(p->clk) / 512; - sh_cmt_write(p, CMCSR, 0x43); + sh_cmt_write_cmcsr(p, 0x43); } else { *rate = clk_get_rate(p->clk) / 8; - sh_cmt_write(p, CMCSR, 0x01a4); + sh_cmt_write_cmcsr(p, 0x01a4); } - sh_cmt_write(p, CMCOR, 0xffffffff); - sh_cmt_write(p, CMCNT, 0); + sh_cmt_write_cmcor(p, 0xffffffff); + sh_cmt_write_cmcnt(p, 0); /* * According to the sh73a0 user's manual, as CMCNT can be operated @@ -194,12 +233,12 @@ static int sh_cmt_enable(struct sh_cmt_priv *p, unsigned long *rate) * take RCLKx2 at maximum. */ for (k = 0; k < 100; k++) { - if (!sh_cmt_read(p, CMCNT)) + if (!sh_cmt_read_cmcnt(p)) break; udelay(1); } - if (sh_cmt_read(p, CMCNT)) { + if (sh_cmt_read_cmcnt(p)) { dev_err(&p->pdev->dev, "cannot clear CMCNT\n"); ret = -ETIMEDOUT; goto err1; @@ -222,7 +261,7 @@ static void sh_cmt_disable(struct sh_cmt_priv *p) sh_cmt_start_stop_ch(p, 0); /* disable interrupts in CMT block */ - sh_cmt_write(p, CMCSR, 0); + sh_cmt_write_cmcsr(p, 0); /* stop clock */ clk_disable(p->clk); @@ -270,7 +309,7 @@ static void sh_cmt_clock_event_program_verify(struct sh_cmt_priv *p, if (new_match > p->max_match_value) new_match = p->max_match_value; - sh_cmt_write(p, CMCOR, new_match); + sh_cmt_write_cmcor(p, new_match); now = sh_cmt_get_counter(p, &has_wrapped); if (has_wrapped && (new_match > p->match_value)) { @@ -346,7 +385,7 @@ static irqreturn_t sh_cmt_interrupt(int irq, void *dev_id) struct sh_cmt_priv *p = dev_id; /* clear flags */ - sh_cmt_write(p, CMCSR, sh_cmt_read(p, CMCSR) & p->clear_bits); + sh_cmt_write_cmcsr(p, sh_cmt_read_cmcsr(p) & p->clear_bits); /* update clock source counter to begin with if enabled * the wrap flag should be cleared by the timer specific @@ -625,14 +664,6 @@ static int sh_cmt_register(struct sh_cmt_priv *p, char *name, unsigned long clockevent_rating, unsigned long clocksource_rating) { - if (p->width == (sizeof(p->max_match_value) * 8)) - p->max_match_value = ~0; - else - p->max_match_value = (1 << p->width) - 1; - - p->match_value = p->max_match_value; - raw_spin_lock_init(&p->lock); - if (clockevent_rating) sh_cmt_register_clockevent(p, name, clockevent_rating); @@ -657,8 +688,6 @@ static int sh_cmt_setup(struct sh_cmt_priv *p, struct platform_device *pdev) goto err0; } - platform_set_drvdata(pdev, p); - res = platform_get_resource(p->pdev, IORESOURCE_MEM, 0); if (!res) { dev_err(&p->pdev->dev, "failed to get I/O memory\n"); @@ -693,32 +722,51 @@ static int sh_cmt_setup(struct sh_cmt_priv *p, struct platform_device *pdev) goto err1; } + p->read_control = sh_cmt_read16; + p->write_control = sh_cmt_write16; + if (resource_size(res) == 6) { p->width = 16; + p->read_count = sh_cmt_read16; + p->write_count = sh_cmt_write16; p->overflow_bit = 0x80; p->clear_bits = ~0x80; } else { p->width = 32; + p->read_count = sh_cmt_read32; + p->write_count = sh_cmt_write32; p->overflow_bit = 0x8000; p->clear_bits = ~0xc000; } + if (p->width == (sizeof(p->max_match_value) * 8)) + p->max_match_value = ~0; + else + p->max_match_value = (1 << p->width) - 1; + + p->match_value = p->max_match_value; + raw_spin_lock_init(&p->lock); + ret = sh_cmt_register(p, (char *)dev_name(&p->pdev->dev), cfg->clockevent_rating, cfg->clocksource_rating); if (ret) { dev_err(&p->pdev->dev, "registration failed\n"); - goto err1; + goto err2; } p->cs_enabled = false; ret = setup_irq(irq, &p->irqaction); if (ret) { dev_err(&p->pdev->dev, "failed to request irq %d\n", irq); - goto err1; + goto err2; } + platform_set_drvdata(pdev, p); + return 0; +err2: + clk_put(p->clk); err1: iounmap(p->mapbase); @@ -751,7 +799,6 @@ static int sh_cmt_probe(struct platform_device *pdev) ret = sh_cmt_setup(p, pdev); if (ret) { kfree(p); - platform_set_drvdata(pdev, NULL); pm_runtime_idle(&pdev->dev); return ret; } @@ -791,7 +838,7 @@ static void __exit sh_cmt_exit(void) } early_platform_init("earlytimer", &sh_cmt_device_driver); -module_init(sh_cmt_init); +subsys_initcall(sh_cmt_init); module_exit(sh_cmt_exit); MODULE_AUTHOR("Magnus Damm"); diff --git a/drivers/clocksource/sh_mtu2.c b/drivers/clocksource/sh_mtu2.c index 83943e2..4aac9ee 100644 --- a/drivers/clocksource/sh_mtu2.c +++ b/drivers/clocksource/sh_mtu2.c @@ -386,7 +386,7 @@ static void __exit sh_mtu2_exit(void) } early_platform_init("earlytimer", &sh_mtu2_device_driver); -module_init(sh_mtu2_init); +subsys_initcall(sh_mtu2_init); module_exit(sh_mtu2_exit); MODULE_AUTHOR("Magnus Damm"); diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c index b4502edc..78b8dae 100644 --- a/drivers/clocksource/sh_tmu.c +++ b/drivers/clocksource/sh_tmu.c @@ -549,7 +549,7 @@ static void __exit sh_tmu_exit(void) } early_platform_init("earlytimer", &sh_tmu_device_driver); -module_init(sh_tmu_init); +subsys_initcall(sh_tmu_init); module_exit(sh_tmu_exit); MODULE_AUTHOR("Magnus Damm"); diff --git a/drivers/clocksource/sunxi_timer.c b/drivers/clocksource/sunxi_timer.c index 4086b91..0ce85e2 100644 --- a/drivers/clocksource/sunxi_timer.c +++ b/drivers/clocksource/sunxi_timer.c @@ -23,7 +23,7 @@ #include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/sunxi_timer.h> -#include <linux/clk-provider.h> +#include <linux/clk/sunxi.h> #define TIMER_CTL_REG 0x00 #define TIMER_CTL_ENABLE (1 << 0) @@ -123,7 +123,7 @@ void __init sunxi_timer_init(void) if (irq <= 0) panic("Can't parse IRQ"); - of_clk_init(NULL); + sunxi_init_clocks(); clk = of_clk_get(node, 0); if (IS_ERR(clk)) diff --git a/drivers/clocksource/tegra20_timer.c b/drivers/clocksource/tegra20_timer.c index 0bde03f..ae877b0 100644 --- a/drivers/clocksource/tegra20_timer.c +++ b/drivers/clocksource/tegra20_timer.c @@ -154,29 +154,12 @@ static struct irqaction tegra_timer_irq = { .dev_id = &tegra_clockevent, }; -static const struct of_device_id timer_match[] __initconst = { - { .compatible = "nvidia,tegra20-timer" }, - {} -}; - -static const struct of_device_id rtc_match[] __initconst = { - { .compatible = "nvidia,tegra20-rtc" }, - {} -}; - -static void __init tegra20_init_timer(void) +static void __init tegra20_init_timer(struct device_node *np) { - struct device_node *np; struct clk *clk; unsigned long rate; int ret; - np = of_find_matching_node(NULL, timer_match); - if (!np) { - pr_err("Failed to find timer DT node\n"); - BUG(); - } - timer_reg_base = of_iomap(np, 0); if (!timer_reg_base) { pr_err("Can't map timer registers\n"); @@ -189,7 +172,7 @@ static void __init tegra20_init_timer(void) BUG(); } - clk = clk_get_sys("timer", NULL); + clk = of_clk_get(np, 0); if (IS_ERR(clk)) { pr_warn("Unable to get timer clock. Assuming 12Mhz input clock.\n"); rate = 12000000; @@ -200,30 +183,6 @@ static void __init tegra20_init_timer(void) of_node_put(np); - np = of_find_matching_node(NULL, rtc_match); - if (!np) { - pr_err("Failed to find RTC DT node\n"); - BUG(); - } - - rtc_base = of_iomap(np, 0); - if (!rtc_base) { - pr_err("Can't map RTC registers"); - BUG(); - } - - /* - * rtc registers are used by read_persistent_clock, keep the rtc clock - * enabled - */ - clk = clk_get_sys("rtc-tegra", NULL); - if (IS_ERR(clk)) - pr_warn("Unable to get rtc-tegra clock\n"); - else - clk_prepare_enable(clk); - - of_node_put(np); - switch (rate) { case 12000000: timer_writel(0x000b, TIMERUS_USEC_CFG); @@ -259,12 +218,34 @@ static void __init tegra20_init_timer(void) tegra_clockevent.irq = tegra_timer_irq.irq; clockevents_config_and_register(&tegra_clockevent, 1000000, 0x1, 0x1fffffff); -#ifdef CONFIG_HAVE_ARM_TWD - twd_local_timer_of_register(); -#endif +} +CLOCKSOURCE_OF_DECLARE(tegra20_timer, "nvidia,tegra20-timer", tegra20_init_timer); + +static void __init tegra20_init_rtc(struct device_node *np) +{ + struct clk *clk; + + rtc_base = of_iomap(np, 0); + if (!rtc_base) { + pr_err("Can't map RTC registers"); + BUG(); + } + + /* + * rtc registers are used by read_persistent_clock, keep the rtc clock + * enabled + */ + clk = of_clk_get(np, 0); + if (IS_ERR(clk)) + pr_warn("Unable to get rtc-tegra clock\n"); + else + clk_prepare_enable(clk); + + of_node_put(np); + register_persistent_clock(NULL, tegra_read_persistent_clock); } -CLOCKSOURCE_OF_DECLARE(tegra20, "nvidia,tegra20-timer", tegra20_init_timer); +CLOCKSOURCE_OF_DECLARE(tegra20_rtc, "nvidia,tegra20-rtc", tegra20_init_rtc); #ifdef CONFIG_PM static u32 usec_config; diff --git a/drivers/clocksource/vt8500_timer.c b/drivers/clocksource/vt8500_timer.c index 8efc86b..64f553f 100644 --- a/drivers/clocksource/vt8500_timer.c +++ b/drivers/clocksource/vt8500_timer.c @@ -129,22 +129,10 @@ static struct irqaction irq = { .dev_id = &clockevent, }; -static struct of_device_id vt8500_timer_ids[] = { - { .compatible = "via,vt8500-timer" }, - { } -}; - -static void __init vt8500_timer_init(void) +static void __init vt8500_timer_init(struct device_node *np) { - struct device_node *np; int timer_irq; - np = of_find_matching_node(NULL, vt8500_timer_ids); - if (!np) { - pr_err("%s: Timer description missing from Device Tree\n", - __func__); - return; - } regbase = of_iomap(np, 0); if (!regbase) { pr_err("%s: Missing iobase description in Device Tree\n", @@ -177,4 +165,4 @@ static void __init vt8500_timer_init(void) 4, 0xf0000000); } -CLOCKSOURCE_OF_DECLARE(vt8500, "via,vt8500-timer", vt8500_timer_init) +CLOCKSOURCE_OF_DECLARE(vt8500, "via,vt8500-timer", vt8500_timer_init); diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 93aaadf..b166e30 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -227,12 +227,6 @@ config GPIO_TS5500 blocks of the TS-5500: DIO1, DIO2 and the LCD port, and the TS-5600 LCD port. -config GPIO_VT8500 - bool "VIA/Wondermedia SoC GPIO Support" - depends on ARCH_VT8500 - help - Say yes here to support the VT8500/WM8505/WM8650 GPIO controller. - config GPIO_XILINX bool "Xilinx GPIO support" depends on PPC_OF || MICROBLAZE diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 22e07bc..a274d7d 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -80,7 +80,6 @@ obj-$(CONFIG_GPIO_TWL6040) += gpio-twl6040.o obj-$(CONFIG_GPIO_UCB1400) += gpio-ucb1400.o obj-$(CONFIG_GPIO_VIPERBOARD) += gpio-viperboard.o obj-$(CONFIG_GPIO_VR41XX) += gpio-vr41xx.o -obj-$(CONFIG_GPIO_VT8500) += gpio-vt8500.o obj-$(CONFIG_GPIO_VX855) += gpio-vx855.o obj-$(CONFIG_GPIO_WM831X) += gpio-wm831x.o obj-$(CONFIG_GPIO_WM8350) += gpio-wm8350.o diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c index b3643ff..99e0fa4 100644 --- a/drivers/gpio/gpio-samsung.c +++ b/drivers/gpio/gpio-samsung.c @@ -1122,8 +1122,12 @@ int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset) #ifdef CONFIG_PLAT_S3C24XX static int s3c24xx_gpiolib_fbank_to_irq(struct gpio_chip *chip, unsigned offset) { - if (offset < 4) - return IRQ_EINT0 + offset; + if (offset < 4) { + if (soc_is_s3c2412()) + return IRQ_EINT0_2412 + offset; + else + return IRQ_EINT0 + offset; + } if (offset < 8) return IRQ_EINT4 + offset - 4; @@ -3024,6 +3028,7 @@ static __init int samsung_gpiolib_init(void) static const struct of_device_id exynos_pinctrl_ids[] = { { .compatible = "samsung,exynos4210-pinctrl", }, { .compatible = "samsung,exynos4x12-pinctrl", }, + { .compatible = "samsung,exynos5250-pinctrl", }, { .compatible = "samsung,exynos5440-pinctrl", }, }; for_each_matching_node(pctrl_np, exynos_pinctrl_ids) diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c index 414ad91..e395635 100644 --- a/drivers/gpio/gpio-tegra.c +++ b/drivers/gpio/gpio-tegra.c @@ -72,6 +72,7 @@ struct tegra_gpio_bank { u32 oe[4]; u32 int_enb[4]; u32 int_lvl[4]; + u32 wake_enb[4]; #endif }; @@ -333,15 +334,31 @@ static int tegra_gpio_suspend(struct device *dev) bank->oe[p] = tegra_gpio_readl(GPIO_OE(gpio)); bank->int_enb[p] = tegra_gpio_readl(GPIO_INT_ENB(gpio)); bank->int_lvl[p] = tegra_gpio_readl(GPIO_INT_LVL(gpio)); + + /* Enable gpio irq for wake up source */ + tegra_gpio_writel(bank->wake_enb[p], + GPIO_INT_ENB(gpio)); } } local_irq_restore(flags); return 0; } -static int tegra_gpio_wake_enable(struct irq_data *d, unsigned int enable) +static int tegra_gpio_irq_set_wake(struct irq_data *d, unsigned int enable) { struct tegra_gpio_bank *bank = irq_data_get_irq_chip_data(d); + int gpio = d->hwirq; + u32 port, bit, mask; + + port = GPIO_PORT(gpio); + bit = GPIO_BIT(gpio); + mask = BIT(bit); + + if (enable) + bank->wake_enb[port] |= mask; + else + bank->wake_enb[port] &= ~mask; + return irq_set_irq_wake(bank->irq, enable); } #endif @@ -353,7 +370,7 @@ static struct irq_chip tegra_gpio_irq_chip = { .irq_unmask = tegra_gpio_irq_unmask, .irq_set_type = tegra_gpio_irq_set_type, #ifdef CONFIG_PM_SLEEP - .irq_set_wake = tegra_gpio_wake_enable, + .irq_set_wake = tegra_gpio_irq_set_wake, #endif }; diff --git a/drivers/gpio/gpio-vt8500.c b/drivers/gpio/gpio-vt8500.c deleted file mode 100644 index 81683ca..0000000 --- a/drivers/gpio/gpio-vt8500.c +++ /dev/null @@ -1,355 +0,0 @@ -/* drivers/gpio/gpio-vt8500.c - * - * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz> - * Based on arch/arm/mach-vt8500/gpio.c: - * - Copyright (C) 2010 Alexey Charkov <alchark@gmail.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/module.h> -#include <linux/err.h> -#include <linux/io.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/bitops.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_irq.h> -#include <linux/of_device.h> - -/* - We handle GPIOs by bank, each bank containing up to 32 GPIOs covered - by one set of registers (although not all may be valid). - - Because different SoC's have different register offsets, we pass the - register offsets as data in vt8500_gpio_dt_ids[]. - - A value of NO_REG is used to indicate that this register is not - supported. Only used for ->en at the moment. -*/ - -#define NO_REG 0xFFFF - -/* - * struct vt8500_gpio_bank_regoffsets - * @en: offset to enable register of the bank - * @dir: offset to direction register of the bank - * @data_out: offset to the data out register of the bank - * @data_in: offset to the data in register of the bank - * @ngpio: highest valid pin in this bank - */ - -struct vt8500_gpio_bank_regoffsets { - unsigned int en; - unsigned int dir; - unsigned int data_out; - unsigned int data_in; - unsigned char ngpio; -}; - -struct vt8500_gpio_data { - unsigned int num_banks; - struct vt8500_gpio_bank_regoffsets banks[]; -}; - -#define VT8500_BANK(__en, __dir, __out, __in, __ngpio) \ -{ \ - .en = __en, \ - .dir = __dir, \ - .data_out = __out, \ - .data_in = __in, \ - .ngpio = __ngpio, \ -} - -static struct vt8500_gpio_data vt8500_data = { - .num_banks = 7, - .banks = { - VT8500_BANK(NO_REG, 0x3C, 0x5C, 0x7C, 9), - VT8500_BANK(0x00, 0x20, 0x40, 0x60, 26), - VT8500_BANK(0x04, 0x24, 0x44, 0x64, 28), - VT8500_BANK(0x08, 0x28, 0x48, 0x68, 31), - VT8500_BANK(0x0C, 0x2C, 0x4C, 0x6C, 19), - VT8500_BANK(0x10, 0x30, 0x50, 0x70, 19), - VT8500_BANK(0x14, 0x34, 0x54, 0x74, 23), - }, -}; - -static struct vt8500_gpio_data wm8505_data = { - .num_banks = 10, - .banks = { - VT8500_BANK(0x64, 0x8C, 0xB4, 0xDC, 22), - VT8500_BANK(0x40, 0x68, 0x90, 0xB8, 8), - VT8500_BANK(0x44, 0x6C, 0x94, 0xBC, 32), - VT8500_BANK(0x48, 0x70, 0x98, 0xC0, 6), - VT8500_BANK(0x4C, 0x74, 0x9C, 0xC4, 16), - VT8500_BANK(0x50, 0x78, 0xA0, 0xC8, 25), - VT8500_BANK(0x54, 0x7C, 0xA4, 0xCC, 5), - VT8500_BANK(0x58, 0x80, 0xA8, 0xD0, 5), - VT8500_BANK(0x5C, 0x84, 0xAC, 0xD4, 12), - VT8500_BANK(0x60, 0x88, 0xB0, 0xD8, 16), - VT8500_BANK(0x500, 0x504, 0x508, 0x50C, 6), - }, -}; - -/* - * No information about which bits are valid so we just make - * them all available until its figured out. - */ -static struct vt8500_gpio_data wm8650_data = { - .num_banks = 9, - .banks = { - VT8500_BANK(0x40, 0x80, 0xC0, 0x00, 32), - VT8500_BANK(0x44, 0x84, 0xC4, 0x04, 32), - VT8500_BANK(0x48, 0x88, 0xC8, 0x08, 32), - VT8500_BANK(0x4C, 0x8C, 0xCC, 0x0C, 32), - VT8500_BANK(0x50, 0x90, 0xD0, 0x10, 32), - VT8500_BANK(0x54, 0x94, 0xD4, 0x14, 32), - VT8500_BANK(0x58, 0x98, 0xD8, 0x18, 32), - VT8500_BANK(0x5C, 0x9C, 0xDC, 0x1C, 32), - VT8500_BANK(0x7C, 0xBC, 0xFC, 0x3C, 32), - VT8500_BANK(0x500, 0x504, 0x508, 0x50C, 6), - }, -}; - -struct vt8500_gpio_chip { - struct gpio_chip chip; - - const struct vt8500_gpio_bank_regoffsets *regs; - void __iomem *base; -}; - -struct vt8500_data { - struct vt8500_gpio_chip *chip; - void __iomem *iobase; - int num_banks; -}; - - -#define to_vt8500(__chip) container_of(__chip, struct vt8500_gpio_chip, chip) - -static int vt8500_gpio_request(struct gpio_chip *chip, unsigned offset) -{ - u32 val; - struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip); - - if (vt8500_chip->regs->en == NO_REG) - return 0; - - val = readl_relaxed(vt8500_chip->base + vt8500_chip->regs->en); - val |= BIT(offset); - writel_relaxed(val, vt8500_chip->base + vt8500_chip->regs->en); - - return 0; -} - -static void vt8500_gpio_free(struct gpio_chip *chip, unsigned offset) -{ - struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip); - u32 val; - - if (vt8500_chip->regs->en == NO_REG) - return; - - val = readl_relaxed(vt8500_chip->base + vt8500_chip->regs->en); - val &= ~BIT(offset); - writel_relaxed(val, vt8500_chip->base + vt8500_chip->regs->en); -} - -static int vt8500_gpio_direction_input(struct gpio_chip *chip, unsigned offset) -{ - struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip); - - u32 val = readl_relaxed(vt8500_chip->base + vt8500_chip->regs->dir); - val &= ~BIT(offset); - writel_relaxed(val, vt8500_chip->base + vt8500_chip->regs->dir); - - return 0; -} - -static int vt8500_gpio_direction_output(struct gpio_chip *chip, unsigned offset, - int value) -{ - struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip); - - u32 val = readl_relaxed(vt8500_chip->base + vt8500_chip->regs->dir); - val |= BIT(offset); - writel_relaxed(val, vt8500_chip->base + vt8500_chip->regs->dir); - - if (value) { - val = readl_relaxed(vt8500_chip->base + - vt8500_chip->regs->data_out); - val |= BIT(offset); - writel_relaxed(val, vt8500_chip->base + - vt8500_chip->regs->data_out); - } - return 0; -} - -static int vt8500_gpio_get_value(struct gpio_chip *chip, unsigned offset) -{ - struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip); - - return (readl_relaxed(vt8500_chip->base + vt8500_chip->regs->data_in) >> - offset) & 1; -} - -static void vt8500_gpio_set_value(struct gpio_chip *chip, unsigned offset, - int value) -{ - struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip); - - u32 val = readl_relaxed(vt8500_chip->base + - vt8500_chip->regs->data_out); - if (value) - val |= BIT(offset); - else - val &= ~BIT(offset); - - writel_relaxed(val, vt8500_chip->base + vt8500_chip->regs->data_out); -} - -static int vt8500_of_xlate(struct gpio_chip *gc, - const struct of_phandle_args *gpiospec, u32 *flags) -{ - /* bank if specificed in gpiospec->args[0] */ - if (flags) - *flags = gpiospec->args[2]; - - return gpiospec->args[1]; -} - -static int vt8500_add_chips(struct platform_device *pdev, void __iomem *base, - const struct vt8500_gpio_data *data) -{ - struct vt8500_data *priv; - struct vt8500_gpio_chip *vtchip; - struct gpio_chip *chip; - int i; - int pin_cnt = 0; - - priv = devm_kzalloc(&pdev->dev, sizeof(struct vt8500_data), GFP_KERNEL); - if (!priv) { - dev_err(&pdev->dev, "failed to allocate memory\n"); - return -ENOMEM; - } - - priv->chip = devm_kzalloc(&pdev->dev, - sizeof(struct vt8500_gpio_chip) * data->num_banks, - GFP_KERNEL); - if (!priv->chip) { - dev_err(&pdev->dev, "failed to allocate chip memory\n"); - return -ENOMEM; - } - - priv->iobase = base; - priv->num_banks = data->num_banks; - platform_set_drvdata(pdev, priv); - - vtchip = priv->chip; - - for (i = 0; i < data->num_banks; i++) { - vtchip[i].base = base; - vtchip[i].regs = &data->banks[i]; - - chip = &vtchip[i].chip; - - chip->of_xlate = vt8500_of_xlate; - chip->of_gpio_n_cells = 3; - chip->of_node = pdev->dev.of_node; - - chip->request = vt8500_gpio_request; - chip->free = vt8500_gpio_free; - chip->direction_input = vt8500_gpio_direction_input; - chip->direction_output = vt8500_gpio_direction_output; - chip->get = vt8500_gpio_get_value; - chip->set = vt8500_gpio_set_value; - chip->can_sleep = 0; - chip->base = pin_cnt; - chip->ngpio = data->banks[i].ngpio; - - pin_cnt += data->banks[i].ngpio; - - gpiochip_add(chip); - } - return 0; -} - -static struct of_device_id vt8500_gpio_dt_ids[] = { - { .compatible = "via,vt8500-gpio", .data = &vt8500_data, }, - { .compatible = "wm,wm8505-gpio", .data = &wm8505_data, }, - { .compatible = "wm,wm8650-gpio", .data = &wm8650_data, }, - { /* Sentinel */ }, -}; - -static int vt8500_gpio_probe(struct platform_device *pdev) -{ - int ret; - void __iomem *gpio_base; - struct resource *res; - const struct of_device_id *of_id = - of_match_device(vt8500_gpio_dt_ids, &pdev->dev); - - if (!of_id) { - dev_err(&pdev->dev, "No matching driver data\n"); - return -ENODEV; - } - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "Unable to get IO resource\n"); - return -ENODEV; - } - - gpio_base = devm_request_and_ioremap(&pdev->dev, res); - if (!gpio_base) { - dev_err(&pdev->dev, "Unable to map GPIO registers\n"); - return -ENOMEM; - } - - ret = vt8500_add_chips(pdev, gpio_base, of_id->data); - - return ret; -} - -static int vt8500_gpio_remove(struct platform_device *pdev) -{ - int i; - int ret; - struct vt8500_data *priv = platform_get_drvdata(pdev); - struct vt8500_gpio_chip *vtchip = priv->chip; - - for (i = 0; i < priv->num_banks; i++) { - ret = gpiochip_remove(&vtchip[i].chip); - if (ret) - dev_warn(&pdev->dev, "gpiochip_remove returned %d\n", - ret); - } - - return 0; -} - -static struct platform_driver vt8500_gpio_driver = { - .probe = vt8500_gpio_probe, - .remove = vt8500_gpio_remove, - .driver = { - .name = "vt8500-gpio", - .owner = THIS_MODULE, - .of_match_table = vt8500_gpio_dt_ids, - }, -}; - -module_platform_driver(vt8500_gpio_driver); - -MODULE_DESCRIPTION("VT8500 GPIO Driver"); -MODULE_AUTHOR("Tony Prisk <linux@prisktech.co.nz>"); -MODULE_LICENSE("GPL v2"); -MODULE_DEVICE_TABLE(of, vt8500_gpio_dt_ids); diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig index a350969..4a33351 100644 --- a/drivers/irqchip/Kconfig +++ b/drivers/irqchip/Kconfig @@ -25,6 +25,14 @@ config ARM_VIC_NR The maximum number of VICs available in the system, for power management. +config RENESAS_INTC_IRQPIN + bool + select IRQ_DOMAIN + +config RENESAS_IRQC + bool + select IRQ_DOMAIN + config VERSATILE_FPGA_IRQ bool select IRQ_DOMAIN diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile index 98e3b87..acf9895 100644 --- a/drivers/irqchip/Makefile +++ b/drivers/irqchip/Makefile @@ -2,10 +2,13 @@ obj-$(CONFIG_IRQCHIP) += irqchip.o obj-$(CONFIG_ARCH_BCM2835) += irq-bcm2835.o obj-$(CONFIG_ARCH_EXYNOS) += exynos-combiner.o +obj-$(CONFIG_ARCH_S3C24XX) += irq-s3c24xx.o obj-$(CONFIG_METAG) += irq-metag-ext.o obj-$(CONFIG_METAG_PERFCOUNTER_IRQS) += irq-metag.o obj-$(CONFIG_ARCH_SUNXI) += irq-sunxi.o obj-$(CONFIG_ARCH_SPEAR3XX) += spear-shirq.o obj-$(CONFIG_ARM_GIC) += irq-gic.o obj-$(CONFIG_ARM_VIC) += irq-vic.o +obj-$(CONFIG_RENESAS_INTC_IRQPIN) += irq-renesas-intc-irqpin.o +obj-$(CONFIG_RENESAS_IRQC) += irq-renesas-irqc.o obj-$(CONFIG_VERSATILE_FPGA_IRQ) += irq-versatile-fpga.o diff --git a/drivers/irqchip/irq-renesas-intc-irqpin.c b/drivers/irqchip/irq-renesas-intc-irqpin.c new file mode 100644 index 0000000..5a68e5a --- /dev/null +++ b/drivers/irqchip/irq-renesas-intc-irqpin.c @@ -0,0 +1,547 @@ +/* + * Renesas INTC External IRQ Pin Driver + * + * Copyright (C) 2013 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/irqdomain.h> +#include <linux/err.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/platform_data/irq-renesas-intc-irqpin.h> + +#define INTC_IRQPIN_MAX 8 /* maximum 8 interrupts per driver instance */ + +#define INTC_IRQPIN_REG_SENSE 0 /* ICRn */ +#define INTC_IRQPIN_REG_PRIO 1 /* INTPRInn */ +#define INTC_IRQPIN_REG_SOURCE 2 /* INTREQnn */ +#define INTC_IRQPIN_REG_MASK 3 /* INTMSKnn */ +#define INTC_IRQPIN_REG_CLEAR 4 /* INTMSKCLRnn */ +#define INTC_IRQPIN_REG_NR 5 + +/* INTC external IRQ PIN hardware register access: + * + * SENSE is read-write 32-bit with 2-bits or 4-bits per IRQ (*) + * PRIO is read-write 32-bit with 4-bits per IRQ (**) + * SOURCE is read-only 32-bit or 8-bit with 1-bit per IRQ (***) + * MASK is write-only 32-bit or 8-bit with 1-bit per IRQ (***) + * CLEAR is write-only 32-bit or 8-bit with 1-bit per IRQ (***) + * + * (*) May be accessed by more than one driver instance - lock needed + * (**) Read-modify-write access by one driver instance - lock needed + * (***) Accessed by one driver instance only - no locking needed + */ + +struct intc_irqpin_iomem { + void __iomem *iomem; + unsigned long (*read)(void __iomem *iomem); + void (*write)(void __iomem *iomem, unsigned long data); + int width; +}; + +struct intc_irqpin_irq { + int hw_irq; + int requested_irq; + int domain_irq; + struct intc_irqpin_priv *p; +}; + +struct intc_irqpin_priv { + struct intc_irqpin_iomem iomem[INTC_IRQPIN_REG_NR]; + struct intc_irqpin_irq irq[INTC_IRQPIN_MAX]; + struct renesas_intc_irqpin_config config; + unsigned int number_of_irqs; + struct platform_device *pdev; + struct irq_chip irq_chip; + struct irq_domain *irq_domain; + bool shared_irqs; + u8 shared_irq_mask; +}; + +static unsigned long intc_irqpin_read32(void __iomem *iomem) +{ + return ioread32(iomem); +} + +static unsigned long intc_irqpin_read8(void __iomem *iomem) +{ + return ioread8(iomem); +} + +static void intc_irqpin_write32(void __iomem *iomem, unsigned long data) +{ + iowrite32(data, iomem); +} + +static void intc_irqpin_write8(void __iomem *iomem, unsigned long data) +{ + iowrite8(data, iomem); +} + +static inline unsigned long intc_irqpin_read(struct intc_irqpin_priv *p, + int reg) +{ + struct intc_irqpin_iomem *i = &p->iomem[reg]; + + return i->read(i->iomem); +} + +static inline void intc_irqpin_write(struct intc_irqpin_priv *p, + int reg, unsigned long data) +{ + struct intc_irqpin_iomem *i = &p->iomem[reg]; + + i->write(i->iomem, data); +} + +static inline unsigned long intc_irqpin_hwirq_mask(struct intc_irqpin_priv *p, + int reg, int hw_irq) +{ + return BIT((p->iomem[reg].width - 1) - hw_irq); +} + +static inline void intc_irqpin_irq_write_hwirq(struct intc_irqpin_priv *p, + int reg, int hw_irq) +{ + intc_irqpin_write(p, reg, intc_irqpin_hwirq_mask(p, reg, hw_irq)); +} + +static DEFINE_RAW_SPINLOCK(intc_irqpin_lock); /* only used by slow path */ + +static void intc_irqpin_read_modify_write(struct intc_irqpin_priv *p, + int reg, int shift, + int width, int value) +{ + unsigned long flags; + unsigned long tmp; + + raw_spin_lock_irqsave(&intc_irqpin_lock, flags); + + tmp = intc_irqpin_read(p, reg); + tmp &= ~(((1 << width) - 1) << shift); + tmp |= value << shift; + intc_irqpin_write(p, reg, tmp); + + raw_spin_unlock_irqrestore(&intc_irqpin_lock, flags); +} + +static void intc_irqpin_mask_unmask_prio(struct intc_irqpin_priv *p, + int irq, int do_mask) +{ + int bitfield_width = 4; /* PRIO assumed to have fixed bitfield width */ + int shift = (7 - irq) * bitfield_width; /* PRIO assumed to be 32-bit */ + + intc_irqpin_read_modify_write(p, INTC_IRQPIN_REG_PRIO, + shift, bitfield_width, + do_mask ? 0 : (1 << bitfield_width) - 1); +} + +static int intc_irqpin_set_sense(struct intc_irqpin_priv *p, int irq, int value) +{ + int bitfield_width = p->config.sense_bitfield_width; + int shift = (7 - irq) * bitfield_width; /* SENSE assumed to be 32-bit */ + + dev_dbg(&p->pdev->dev, "sense irq = %d, mode = %d\n", irq, value); + + if (value >= (1 << bitfield_width)) + return -EINVAL; + + intc_irqpin_read_modify_write(p, INTC_IRQPIN_REG_SENSE, shift, + bitfield_width, value); + return 0; +} + +static void intc_irqpin_dbg(struct intc_irqpin_irq *i, char *str) +{ + dev_dbg(&i->p->pdev->dev, "%s (%d:%d:%d)\n", + str, i->requested_irq, i->hw_irq, i->domain_irq); +} + +static void intc_irqpin_irq_enable(struct irq_data *d) +{ + struct intc_irqpin_priv *p = irq_data_get_irq_chip_data(d); + int hw_irq = irqd_to_hwirq(d); + + intc_irqpin_dbg(&p->irq[hw_irq], "enable"); + intc_irqpin_irq_write_hwirq(p, INTC_IRQPIN_REG_CLEAR, hw_irq); +} + +static void intc_irqpin_irq_disable(struct irq_data *d) +{ + struct intc_irqpin_priv *p = irq_data_get_irq_chip_data(d); + int hw_irq = irqd_to_hwirq(d); + + intc_irqpin_dbg(&p->irq[hw_irq], "disable"); + intc_irqpin_irq_write_hwirq(p, INTC_IRQPIN_REG_MASK, hw_irq); +} + +static void intc_irqpin_shared_irq_enable(struct irq_data *d) +{ + struct intc_irqpin_priv *p = irq_data_get_irq_chip_data(d); + int hw_irq = irqd_to_hwirq(d); + + intc_irqpin_dbg(&p->irq[hw_irq], "shared enable"); + intc_irqpin_irq_write_hwirq(p, INTC_IRQPIN_REG_CLEAR, hw_irq); + + p->shared_irq_mask &= ~BIT(hw_irq); +} + +static void intc_irqpin_shared_irq_disable(struct irq_data *d) +{ + struct intc_irqpin_priv *p = irq_data_get_irq_chip_data(d); + int hw_irq = irqd_to_hwirq(d); + + intc_irqpin_dbg(&p->irq[hw_irq], "shared disable"); + intc_irqpin_irq_write_hwirq(p, INTC_IRQPIN_REG_MASK, hw_irq); + + p->shared_irq_mask |= BIT(hw_irq); +} + +static void intc_irqpin_irq_enable_force(struct irq_data *d) +{ + struct intc_irqpin_priv *p = irq_data_get_irq_chip_data(d); + int irq = p->irq[irqd_to_hwirq(d)].requested_irq; + + intc_irqpin_irq_enable(d); + + /* enable interrupt through parent interrupt controller, + * assumes non-shared interrupt with 1:1 mapping + * needed for busted IRQs on some SoCs like sh73a0 + */ + irq_get_chip(irq)->irq_unmask(irq_get_irq_data(irq)); +} + +static void intc_irqpin_irq_disable_force(struct irq_data *d) +{ + struct intc_irqpin_priv *p = irq_data_get_irq_chip_data(d); + int irq = p->irq[irqd_to_hwirq(d)].requested_irq; + + /* disable interrupt through parent interrupt controller, + * assumes non-shared interrupt with 1:1 mapping + * needed for busted IRQs on some SoCs like sh73a0 + */ + irq_get_chip(irq)->irq_mask(irq_get_irq_data(irq)); + intc_irqpin_irq_disable(d); +} + +#define INTC_IRQ_SENSE_VALID 0x10 +#define INTC_IRQ_SENSE(x) (x + INTC_IRQ_SENSE_VALID) + +static unsigned char intc_irqpin_sense[IRQ_TYPE_SENSE_MASK + 1] = { + [IRQ_TYPE_EDGE_FALLING] = INTC_IRQ_SENSE(0x00), + [IRQ_TYPE_EDGE_RISING] = INTC_IRQ_SENSE(0x01), + [IRQ_TYPE_LEVEL_LOW] = INTC_IRQ_SENSE(0x02), + [IRQ_TYPE_LEVEL_HIGH] = INTC_IRQ_SENSE(0x03), + [IRQ_TYPE_EDGE_BOTH] = INTC_IRQ_SENSE(0x04), +}; + +static int intc_irqpin_irq_set_type(struct irq_data *d, unsigned int type) +{ + unsigned char value = intc_irqpin_sense[type & IRQ_TYPE_SENSE_MASK]; + struct intc_irqpin_priv *p = irq_data_get_irq_chip_data(d); + + if (!(value & INTC_IRQ_SENSE_VALID)) + return -EINVAL; + + return intc_irqpin_set_sense(p, irqd_to_hwirq(d), + value ^ INTC_IRQ_SENSE_VALID); +} + +static irqreturn_t intc_irqpin_irq_handler(int irq, void *dev_id) +{ + struct intc_irqpin_irq *i = dev_id; + struct intc_irqpin_priv *p = i->p; + unsigned long bit; + + intc_irqpin_dbg(i, "demux1"); + bit = intc_irqpin_hwirq_mask(p, INTC_IRQPIN_REG_SOURCE, i->hw_irq); + + if (intc_irqpin_read(p, INTC_IRQPIN_REG_SOURCE) & bit) { + intc_irqpin_write(p, INTC_IRQPIN_REG_SOURCE, ~bit); + intc_irqpin_dbg(i, "demux2"); + generic_handle_irq(i->domain_irq); + return IRQ_HANDLED; + } + return IRQ_NONE; +} + +static irqreturn_t intc_irqpin_shared_irq_handler(int irq, void *dev_id) +{ + struct intc_irqpin_priv *p = dev_id; + unsigned int reg_source = intc_irqpin_read(p, INTC_IRQPIN_REG_SOURCE); + irqreturn_t status = IRQ_NONE; + int k; + + for (k = 0; k < 8; k++) { + if (reg_source & BIT(7 - k)) { + if (BIT(k) & p->shared_irq_mask) + continue; + + status |= intc_irqpin_irq_handler(irq, &p->irq[k]); + } + } + + return status; +} + +static int intc_irqpin_irq_domain_map(struct irq_domain *h, unsigned int virq, + irq_hw_number_t hw) +{ + struct intc_irqpin_priv *p = h->host_data; + + p->irq[hw].domain_irq = virq; + p->irq[hw].hw_irq = hw; + + intc_irqpin_dbg(&p->irq[hw], "map"); + irq_set_chip_data(virq, h->host_data); + irq_set_chip_and_handler(virq, &p->irq_chip, handle_level_irq); + set_irq_flags(virq, IRQF_VALID); /* kill me now */ + return 0; +} + +static struct irq_domain_ops intc_irqpin_irq_domain_ops = { + .map = intc_irqpin_irq_domain_map, + .xlate = irq_domain_xlate_twocell, +}; + +static int intc_irqpin_probe(struct platform_device *pdev) +{ + struct renesas_intc_irqpin_config *pdata = pdev->dev.platform_data; + struct intc_irqpin_priv *p; + struct intc_irqpin_iomem *i; + struct resource *io[INTC_IRQPIN_REG_NR]; + struct resource *irq; + struct irq_chip *irq_chip; + void (*enable_fn)(struct irq_data *d); + void (*disable_fn)(struct irq_data *d); + const char *name = dev_name(&pdev->dev); + int ref_irq; + int ret; + int k; + + p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL); + if (!p) { + dev_err(&pdev->dev, "failed to allocate driver data\n"); + ret = -ENOMEM; + goto err0; + } + + /* deal with driver instance configuration */ + if (pdata) + memcpy(&p->config, pdata, sizeof(*pdata)); + if (!p->config.sense_bitfield_width) + p->config.sense_bitfield_width = 4; /* default to 4 bits */ + + p->pdev = pdev; + platform_set_drvdata(pdev, p); + + /* get hold of manadatory IOMEM */ + for (k = 0; k < INTC_IRQPIN_REG_NR; k++) { + io[k] = platform_get_resource(pdev, IORESOURCE_MEM, k); + if (!io[k]) { + dev_err(&pdev->dev, "not enough IOMEM resources\n"); + ret = -EINVAL; + goto err0; + } + } + + /* allow any number of IRQs between 1 and INTC_IRQPIN_MAX */ + for (k = 0; k < INTC_IRQPIN_MAX; k++) { + irq = platform_get_resource(pdev, IORESOURCE_IRQ, k); + if (!irq) + break; + + p->irq[k].p = p; + p->irq[k].requested_irq = irq->start; + } + + p->number_of_irqs = k; + if (p->number_of_irqs < 1) { + dev_err(&pdev->dev, "not enough IRQ resources\n"); + ret = -EINVAL; + goto err0; + } + + /* ioremap IOMEM and setup read/write callbacks */ + for (k = 0; k < INTC_IRQPIN_REG_NR; k++) { + i = &p->iomem[k]; + + switch (resource_size(io[k])) { + case 1: + i->width = 8; + i->read = intc_irqpin_read8; + i->write = intc_irqpin_write8; + break; + case 4: + i->width = 32; + i->read = intc_irqpin_read32; + i->write = intc_irqpin_write32; + break; + default: + dev_err(&pdev->dev, "IOMEM size mismatch\n"); + ret = -EINVAL; + goto err0; + } + + i->iomem = devm_ioremap_nocache(&pdev->dev, io[k]->start, + resource_size(io[k])); + if (!i->iomem) { + dev_err(&pdev->dev, "failed to remap IOMEM\n"); + ret = -ENXIO; + goto err0; + } + } + + /* mask all interrupts using priority */ + for (k = 0; k < p->number_of_irqs; k++) + intc_irqpin_mask_unmask_prio(p, k, 1); + + /* clear all pending interrupts */ + intc_irqpin_write(p, INTC_IRQPIN_REG_SOURCE, 0x0); + + /* scan for shared interrupt lines */ + ref_irq = p->irq[0].requested_irq; + p->shared_irqs = true; + for (k = 1; k < p->number_of_irqs; k++) { + if (ref_irq != p->irq[k].requested_irq) { + p->shared_irqs = false; + break; + } + } + + /* use more severe masking method if requested */ + if (p->config.control_parent) { + enable_fn = intc_irqpin_irq_enable_force; + disable_fn = intc_irqpin_irq_disable_force; + } else if (!p->shared_irqs) { + enable_fn = intc_irqpin_irq_enable; + disable_fn = intc_irqpin_irq_disable; + } else { + enable_fn = intc_irqpin_shared_irq_enable; + disable_fn = intc_irqpin_shared_irq_disable; + } + + irq_chip = &p->irq_chip; + irq_chip->name = name; + irq_chip->irq_mask = disable_fn; + irq_chip->irq_unmask = enable_fn; + irq_chip->irq_enable = enable_fn; + irq_chip->irq_disable = disable_fn; + irq_chip->irq_set_type = intc_irqpin_irq_set_type; + irq_chip->flags = IRQCHIP_SKIP_SET_WAKE; + + p->irq_domain = irq_domain_add_simple(pdev->dev.of_node, + p->number_of_irqs, + p->config.irq_base, + &intc_irqpin_irq_domain_ops, p); + if (!p->irq_domain) { + ret = -ENXIO; + dev_err(&pdev->dev, "cannot initialize irq domain\n"); + goto err0; + } + + if (p->shared_irqs) { + /* request one shared interrupt */ + if (devm_request_irq(&pdev->dev, p->irq[0].requested_irq, + intc_irqpin_shared_irq_handler, + IRQF_SHARED, name, p)) { + dev_err(&pdev->dev, "failed to request low IRQ\n"); + ret = -ENOENT; + goto err1; + } + } else { + /* request interrupts one by one */ + for (k = 0; k < p->number_of_irqs; k++) { + if (devm_request_irq(&pdev->dev, + p->irq[k].requested_irq, + intc_irqpin_irq_handler, + 0, name, &p->irq[k])) { + dev_err(&pdev->dev, + "failed to request low IRQ\n"); + ret = -ENOENT; + goto err1; + } + } + } + + /* unmask all interrupts on prio level */ + for (k = 0; k < p->number_of_irqs; k++) + intc_irqpin_mask_unmask_prio(p, k, 0); + + dev_info(&pdev->dev, "driving %d irqs\n", p->number_of_irqs); + + /* warn in case of mismatch if irq base is specified */ + if (p->config.irq_base) { + if (p->config.irq_base != p->irq[0].domain_irq) + dev_warn(&pdev->dev, "irq base mismatch (%d/%d)\n", + p->config.irq_base, p->irq[0].domain_irq); + } + + return 0; + +err1: + irq_domain_remove(p->irq_domain); +err0: + return ret; +} + +static int intc_irqpin_remove(struct platform_device *pdev) +{ + struct intc_irqpin_priv *p = platform_get_drvdata(pdev); + + irq_domain_remove(p->irq_domain); + + return 0; +} + +static const struct of_device_id intc_irqpin_dt_ids[] = { + { .compatible = "renesas,intc-irqpin", }, + {}, +}; +MODULE_DEVICE_TABLE(of, intc_irqpin_dt_ids); + +static struct platform_driver intc_irqpin_device_driver = { + .probe = intc_irqpin_probe, + .remove = intc_irqpin_remove, + .driver = { + .name = "renesas_intc_irqpin", + .of_match_table = intc_irqpin_dt_ids, + .owner = THIS_MODULE, + } +}; + +static int __init intc_irqpin_init(void) +{ + return platform_driver_register(&intc_irqpin_device_driver); +} +postcore_initcall(intc_irqpin_init); + +static void __exit intc_irqpin_exit(void) +{ + platform_driver_unregister(&intc_irqpin_device_driver); +} +module_exit(intc_irqpin_exit); + +MODULE_AUTHOR("Magnus Damm"); +MODULE_DESCRIPTION("Renesas INTC External IRQ Pin Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/irqchip/irq-renesas-irqc.c b/drivers/irqchip/irq-renesas-irqc.c new file mode 100644 index 0000000..927bff3 --- /dev/null +++ b/drivers/irqchip/irq-renesas-irqc.c @@ -0,0 +1,307 @@ +/* + * Renesas IRQC Driver + * + * Copyright (C) 2013 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/irqdomain.h> +#include <linux/err.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/platform_data/irq-renesas-irqc.h> + +#define IRQC_IRQ_MAX 32 /* maximum 32 interrupts per driver instance */ + +#define IRQC_REQ_STS 0x00 +#define IRQC_EN_STS 0x04 +#define IRQC_EN_SET 0x08 +#define IRQC_INT_CPU_BASE(n) (0x000 + ((n) * 0x10)) +#define DETECT_STATUS 0x100 +#define IRQC_CONFIG(n) (0x180 + ((n) * 0x04)) + +struct irqc_irq { + int hw_irq; + int requested_irq; + int domain_irq; + struct irqc_priv *p; +}; + +struct irqc_priv { + void __iomem *iomem; + void __iomem *cpu_int_base; + struct irqc_irq irq[IRQC_IRQ_MAX]; + struct renesas_irqc_config config; + unsigned int number_of_irqs; + struct platform_device *pdev; + struct irq_chip irq_chip; + struct irq_domain *irq_domain; +}; + +static void irqc_dbg(struct irqc_irq *i, char *str) +{ + dev_dbg(&i->p->pdev->dev, "%s (%d:%d:%d)\n", + str, i->requested_irq, i->hw_irq, i->domain_irq); +} + +static void irqc_irq_enable(struct irq_data *d) +{ + struct irqc_priv *p = irq_data_get_irq_chip_data(d); + int hw_irq = irqd_to_hwirq(d); + + irqc_dbg(&p->irq[hw_irq], "enable"); + iowrite32(BIT(hw_irq), p->cpu_int_base + IRQC_EN_SET); +} + +static void irqc_irq_disable(struct irq_data *d) +{ + struct irqc_priv *p = irq_data_get_irq_chip_data(d); + int hw_irq = irqd_to_hwirq(d); + + irqc_dbg(&p->irq[hw_irq], "disable"); + iowrite32(BIT(hw_irq), p->cpu_int_base + IRQC_EN_STS); +} + +#define INTC_IRQ_SENSE_VALID 0x10 +#define INTC_IRQ_SENSE(x) (x + INTC_IRQ_SENSE_VALID) + +static unsigned char irqc_sense[IRQ_TYPE_SENSE_MASK + 1] = { + [IRQ_TYPE_LEVEL_LOW] = INTC_IRQ_SENSE(0x01), + [IRQ_TYPE_LEVEL_HIGH] = INTC_IRQ_SENSE(0x02), + [IRQ_TYPE_EDGE_FALLING] = INTC_IRQ_SENSE(0x04), /* Synchronous */ + [IRQ_TYPE_EDGE_RISING] = INTC_IRQ_SENSE(0x08), /* Synchronous */ + [IRQ_TYPE_EDGE_BOTH] = INTC_IRQ_SENSE(0x0c), /* Synchronous */ +}; + +static int irqc_irq_set_type(struct irq_data *d, unsigned int type) +{ + struct irqc_priv *p = irq_data_get_irq_chip_data(d); + int hw_irq = irqd_to_hwirq(d); + unsigned char value = irqc_sense[type & IRQ_TYPE_SENSE_MASK]; + unsigned long tmp; + + irqc_dbg(&p->irq[hw_irq], "sense"); + + if (!(value & INTC_IRQ_SENSE_VALID)) + return -EINVAL; + + tmp = ioread32(p->iomem + IRQC_CONFIG(hw_irq)); + tmp &= ~0x3f; + tmp |= value ^ INTC_IRQ_SENSE_VALID; + iowrite32(tmp, p->iomem + IRQC_CONFIG(hw_irq)); + return 0; +} + +static irqreturn_t irqc_irq_handler(int irq, void *dev_id) +{ + struct irqc_irq *i = dev_id; + struct irqc_priv *p = i->p; + unsigned long bit = BIT(i->hw_irq); + + irqc_dbg(i, "demux1"); + + if (ioread32(p->iomem + DETECT_STATUS) & bit) { + iowrite32(bit, p->iomem + DETECT_STATUS); + irqc_dbg(i, "demux2"); + generic_handle_irq(i->domain_irq); + return IRQ_HANDLED; + } + return IRQ_NONE; +} + +static int irqc_irq_domain_map(struct irq_domain *h, unsigned int virq, + irq_hw_number_t hw) +{ + struct irqc_priv *p = h->host_data; + + p->irq[hw].domain_irq = virq; + p->irq[hw].hw_irq = hw; + + irqc_dbg(&p->irq[hw], "map"); + irq_set_chip_data(virq, h->host_data); + irq_set_chip_and_handler(virq, &p->irq_chip, handle_level_irq); + set_irq_flags(virq, IRQF_VALID); /* kill me now */ + return 0; +} + +static struct irq_domain_ops irqc_irq_domain_ops = { + .map = irqc_irq_domain_map, + .xlate = irq_domain_xlate_twocell, +}; + +static int irqc_probe(struct platform_device *pdev) +{ + struct renesas_irqc_config *pdata = pdev->dev.platform_data; + struct irqc_priv *p; + struct resource *io; + struct resource *irq; + struct irq_chip *irq_chip; + const char *name = dev_name(&pdev->dev); + int ret; + int k; + + p = kzalloc(sizeof(*p), GFP_KERNEL); + if (!p) { + dev_err(&pdev->dev, "failed to allocate driver data\n"); + ret = -ENOMEM; + goto err0; + } + + /* deal with driver instance configuration */ + if (pdata) + memcpy(&p->config, pdata, sizeof(*pdata)); + + p->pdev = pdev; + platform_set_drvdata(pdev, p); + + /* get hold of manadatory IOMEM */ + io = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!io) { + dev_err(&pdev->dev, "not enough IOMEM resources\n"); + ret = -EINVAL; + goto err1; + } + + /* allow any number of IRQs between 1 and IRQC_IRQ_MAX */ + for (k = 0; k < IRQC_IRQ_MAX; k++) { + irq = platform_get_resource(pdev, IORESOURCE_IRQ, k); + if (!irq) + break; + + p->irq[k].p = p; + p->irq[k].requested_irq = irq->start; + } + + p->number_of_irqs = k; + if (p->number_of_irqs < 1) { + dev_err(&pdev->dev, "not enough IRQ resources\n"); + ret = -EINVAL; + goto err1; + } + + /* ioremap IOMEM and setup read/write callbacks */ + p->iomem = ioremap_nocache(io->start, resource_size(io)); + if (!p->iomem) { + dev_err(&pdev->dev, "failed to remap IOMEM\n"); + ret = -ENXIO; + goto err2; + } + + p->cpu_int_base = p->iomem + IRQC_INT_CPU_BASE(0); /* SYS-SPI */ + + irq_chip = &p->irq_chip; + irq_chip->name = name; + irq_chip->irq_mask = irqc_irq_disable; + irq_chip->irq_unmask = irqc_irq_enable; + irq_chip->irq_enable = irqc_irq_enable; + irq_chip->irq_disable = irqc_irq_disable; + irq_chip->irq_set_type = irqc_irq_set_type; + irq_chip->flags = IRQCHIP_SKIP_SET_WAKE; + + p->irq_domain = irq_domain_add_simple(pdev->dev.of_node, + p->number_of_irqs, + p->config.irq_base, + &irqc_irq_domain_ops, p); + if (!p->irq_domain) { + ret = -ENXIO; + dev_err(&pdev->dev, "cannot initialize irq domain\n"); + goto err2; + } + + /* request interrupts one by one */ + for (k = 0; k < p->number_of_irqs; k++) { + if (request_irq(p->irq[k].requested_irq, irqc_irq_handler, + 0, name, &p->irq[k])) { + dev_err(&pdev->dev, "failed to request IRQ\n"); + ret = -ENOENT; + goto err3; + } + } + + dev_info(&pdev->dev, "driving %d irqs\n", p->number_of_irqs); + + /* warn in case of mismatch if irq base is specified */ + if (p->config.irq_base) { + if (p->config.irq_base != p->irq[0].domain_irq) + dev_warn(&pdev->dev, "irq base mismatch (%d/%d)\n", + p->config.irq_base, p->irq[0].domain_irq); + } + + return 0; +err3: + for (; k >= 0; k--) + free_irq(p->irq[k - 1].requested_irq, &p->irq[k - 1]); + + irq_domain_remove(p->irq_domain); +err2: + iounmap(p->iomem); +err1: + kfree(p); +err0: + return ret; +} + +static int irqc_remove(struct platform_device *pdev) +{ + struct irqc_priv *p = platform_get_drvdata(pdev); + int k; + + for (k = 0; k < p->number_of_irqs; k++) + free_irq(p->irq[k].requested_irq, &p->irq[k]); + + irq_domain_remove(p->irq_domain); + iounmap(p->iomem); + kfree(p); + return 0; +} + +static const struct of_device_id irqc_dt_ids[] = { + { .compatible = "renesas,irqc", }, + {}, +}; +MODULE_DEVICE_TABLE(of, irqc_dt_ids); + +static struct platform_driver irqc_device_driver = { + .probe = irqc_probe, + .remove = irqc_remove, + .driver = { + .name = "renesas_irqc", + .of_match_table = irqc_dt_ids, + .owner = THIS_MODULE, + } +}; + +static int __init irqc_init(void) +{ + return platform_driver_register(&irqc_device_driver); +} +postcore_initcall(irqc_init); + +static void __exit irqc_exit(void) +{ + platform_driver_unregister(&irqc_device_driver); +} +module_exit(irqc_exit); + +MODULE_AUTHOR("Magnus Damm"); +MODULE_DESCRIPTION("Renesas IRQC Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/arch/arm/mach-s3c24xx/irq.c b/drivers/irqchip/irq-s3c24xx.c index c1b96f7..5e40b34 100644 --- a/arch/arm/mach-s3c24xx/irq.c +++ b/drivers/irqchip/irq-s3c24xx.c @@ -25,7 +25,11 @@ #include <linux/ioport.h> #include <linux/device.h> #include <linux/irqdomain.h> +#include <linux/of.h> +#include <linux/of_irq.h> +#include <linux/of_address.h> +#include <asm/exception.h> #include <asm/mach/irq.h> #include <mach/regs-irq.h> @@ -35,6 +39,8 @@ #include <plat/regs-irqtype.h> #include <plat/pm.h> +#include "irqchip.h" + #define S3C_IRQTYPE_NONE 0 #define S3C_IRQTYPE_EINT 1 #define S3C_IRQTYPE_EDGE 2 @@ -42,6 +48,7 @@ struct s3c_irq_data { unsigned int type; + unsigned long offset; unsigned long parent_irq; /* data gets filled during init */ @@ -68,23 +75,34 @@ struct s3c_irq_intc { struct s3c_irq_data *irqs; }; +/* + * Array holding pointers to the global controller structs + * [0] ... main_intc + * [1] ... sub_intc + * [2] ... main_intc2 on s3c2416 + */ +static struct s3c_irq_intc *s3c_intc[3]; + static void s3c_irq_mask(struct irq_data *data) { - struct s3c_irq_intc *intc = data->domain->host_data; + struct s3c_irq_data *irq_data = irq_data_get_irq_chip_data(data); + struct s3c_irq_intc *intc = irq_data->intc; struct s3c_irq_intc *parent_intc = intc->parent; - struct s3c_irq_data *irq_data = &intc->irqs[data->hwirq]; struct s3c_irq_data *parent_data; unsigned long mask; unsigned int irqno; mask = __raw_readl(intc->reg_mask); - mask |= (1UL << data->hwirq); + mask |= (1UL << irq_data->offset); __raw_writel(mask, intc->reg_mask); - if (parent_intc && irq_data->parent_irq) { + if (parent_intc) { parent_data = &parent_intc->irqs[irq_data->parent_irq]; - /* check to see if we need to mask the parent IRQ */ + /* check to see if we need to mask the parent IRQ + * The parent_irq is always in main_intc, so the hwirq + * for find_mapping does not need an offset in any case. + */ if ((mask & parent_data->sub_bits) == parent_data->sub_bits) { irqno = irq_find_mapping(parent_intc->domain, irq_data->parent_irq); @@ -95,17 +113,17 @@ static void s3c_irq_mask(struct irq_data *data) static void s3c_irq_unmask(struct irq_data *data) { - struct s3c_irq_intc *intc = data->domain->host_data; + struct s3c_irq_data *irq_data = irq_data_get_irq_chip_data(data); + struct s3c_irq_intc *intc = irq_data->intc; struct s3c_irq_intc *parent_intc = intc->parent; - struct s3c_irq_data *irq_data = &intc->irqs[data->hwirq]; unsigned long mask; unsigned int irqno; mask = __raw_readl(intc->reg_mask); - mask &= ~(1UL << data->hwirq); + mask &= ~(1UL << irq_data->offset); __raw_writel(mask, intc->reg_mask); - if (parent_intc && irq_data->parent_irq) { + if (parent_intc) { irqno = irq_find_mapping(parent_intc->domain, irq_data->parent_irq); s3c_irq_unmask(irq_get_irq_data(irqno)); @@ -114,14 +132,37 @@ static void s3c_irq_unmask(struct irq_data *data) static inline void s3c_irq_ack(struct irq_data *data) { - struct s3c_irq_intc *intc = data->domain->host_data; - unsigned long bitval = 1UL << data->hwirq; + struct s3c_irq_data *irq_data = irq_data_get_irq_chip_data(data); + struct s3c_irq_intc *intc = irq_data->intc; + unsigned long bitval = 1UL << irq_data->offset; __raw_writel(bitval, intc->reg_pending); if (intc->reg_intpnd) __raw_writel(bitval, intc->reg_intpnd); } +static int s3c_irq_type(struct irq_data *data, unsigned int type) +{ + switch (type) { + case IRQ_TYPE_NONE: + break; + case IRQ_TYPE_EDGE_RISING: + case IRQ_TYPE_EDGE_FALLING: + case IRQ_TYPE_EDGE_BOTH: + irq_set_handler(data->irq, handle_edge_irq); + break; + case IRQ_TYPE_LEVEL_LOW: + case IRQ_TYPE_LEVEL_HIGH: + irq_set_handler(data->irq, handle_level_irq); + break; + default: + pr_err("No such irq type %d", type); + return -EINVAL; + } + + return 0; +} + static int s3c_irqext_type_set(void __iomem *gpcon_reg, void __iomem *extint_reg, unsigned long gpcon_offset, @@ -227,6 +268,7 @@ static struct irq_chip s3c_irq_chip = { .irq_ack = s3c_irq_ack, .irq_mask = s3c_irq_mask, .irq_unmask = s3c_irq_unmask, + .irq_set_type = s3c_irq_type, .irq_set_wake = s3c_irq_wake }; @@ -235,6 +277,7 @@ static struct irq_chip s3c_irq_level_chip = { .irq_mask = s3c_irq_mask, .irq_unmask = s3c_irq_unmask, .irq_ack = s3c_irq_ack, + .irq_set_type = s3c_irq_type, }; static struct irq_chip s3c_irqext_chip = { @@ -258,12 +301,19 @@ static struct irq_chip s3c_irq_eint0t4 = { static void s3c_irq_demux(unsigned int irq, struct irq_desc *desc) { struct irq_chip *chip = irq_desc_get_chip(desc); - struct s3c_irq_intc *intc = desc->irq_data.domain->host_data; - struct s3c_irq_data *irq_data = &intc->irqs[desc->irq_data.hwirq]; + struct s3c_irq_data *irq_data = irq_desc_get_chip_data(desc); + struct s3c_irq_intc *intc = irq_data->intc; struct s3c_irq_intc *sub_intc = irq_data->sub_intc; unsigned long src; unsigned long msk; unsigned int n; + unsigned int offset; + + /* we're using individual domains for the non-dt case + * and one big domain for the dt case where the subintc + * starts at hwirq number 32. + */ + offset = (intc->domain->of_node) ? 32 : 0; chained_irq_enter(chip, desc); @@ -276,12 +326,64 @@ static void s3c_irq_demux(unsigned int irq, struct irq_desc *desc) while (src) { n = __ffs(src); src &= ~(1 << n); - generic_handle_irq(irq_find_mapping(sub_intc->domain, n)); + irq = irq_find_mapping(sub_intc->domain, offset + n); + generic_handle_irq(irq); } chained_irq_exit(chip, desc); } +static inline int s3c24xx_handle_intc(struct s3c_irq_intc *intc, + struct pt_regs *regs, int intc_offset) +{ + int pnd; + int offset; + int irq; + + pnd = __raw_readl(intc->reg_intpnd); + if (!pnd) + return false; + + /* non-dt machines use individual domains */ + if (!intc->domain->of_node) + intc_offset = 0; + + /* We have a problem that the INTOFFSET register does not always + * show one interrupt. Occasionally we get two interrupts through + * the prioritiser, and this causes the INTOFFSET register to show + * what looks like the logical-or of the two interrupt numbers. + * + * Thanks to Klaus, Shannon, et al for helping to debug this problem + */ + offset = __raw_readl(intc->reg_intpnd + 4); + + /* Find the bit manually, when the offset is wrong. + * The pending register only ever contains the one bit of the next + * interrupt to handle. + */ + if (!(pnd & (1 << offset))) + offset = __ffs(pnd); + + irq = irq_find_mapping(intc->domain, intc_offset + offset); + handle_IRQ(irq, regs); + return true; +} + +asmlinkage void __exception_irq_entry s3c24xx_handle_irq(struct pt_regs *regs) +{ + do { + if (likely(s3c_intc[0])) + if (s3c24xx_handle_intc(s3c_intc[0], regs, 0)) + continue; + + if (s3c_intc[2]) + if (s3c24xx_handle_intc(s3c_intc[2], regs, 64)) + continue; + + break; + } while (1); +} + #ifdef CONFIG_FIQ /** * s3c24xx_set_fiq - set the FIQ routing @@ -324,25 +426,21 @@ static int s3c24xx_irq_map(struct irq_domain *h, unsigned int virq, struct s3c_irq_data *parent_irq_data; unsigned int irqno; - if (!intc) { - pr_err("irq-s3c24xx: no controller found for hwirq %lu\n", hw); - return -EINVAL; - } - - if (!irq_data) { - pr_err("irq-s3c24xx: no irq data found for hwirq %lu\n", hw); - return -EINVAL; - } - /* attach controller pointer to irq_data */ irq_data->intc = intc; + irq_data->offset = hw; + + parent_intc = intc->parent; /* set handler and flags */ switch (irq_data->type) { case S3C_IRQTYPE_NONE: return 0; case S3C_IRQTYPE_EINT: - if (irq_data->parent_irq) + /* On the S3C2412, the EINT0to3 have a parent irq + * but need the s3c_irq_eint0t4 chip + */ + if (parent_intc && (!soc_is_s3c2412() || hw >= 4)) irq_set_chip_and_handler(virq, &s3c_irqext_chip, handle_edge_irq); else @@ -350,8 +448,7 @@ static int s3c24xx_irq_map(struct irq_domain *h, unsigned int virq, handle_edge_irq); break; case S3C_IRQTYPE_EDGE: - if (irq_data->parent_irq || - intc->reg_pending == S3C2416_SRCPND2) + if (parent_intc || intc->reg_pending == S3C2416_SRCPND2) irq_set_chip_and_handler(virq, &s3c_irq_level_chip, handle_edge_irq); else @@ -359,7 +456,7 @@ static int s3c24xx_irq_map(struct irq_domain *h, unsigned int virq, handle_edge_irq); break; case S3C_IRQTYPE_LEVEL: - if (irq_data->parent_irq) + if (parent_intc) irq_set_chip_and_handler(virq, &s3c_irq_level_chip, handle_level_irq); else @@ -370,23 +467,19 @@ static int s3c24xx_irq_map(struct irq_domain *h, unsigned int virq, pr_err("irq-s3c24xx: unsupported irqtype %d\n", irq_data->type); return -EINVAL; } + + irq_set_chip_data(virq, irq_data); + set_irq_flags(virq, IRQF_VALID); - if (irq_data->parent_irq) { - parent_intc = intc->parent; - if (!parent_intc) { - pr_err("irq-s3c24xx: no parent controller found for hwirq %lu\n", - hw); + if (parent_intc && irq_data->type != S3C_IRQTYPE_NONE) { + if (irq_data->parent_irq > 31) { + pr_err("irq-s3c24xx: parent irq %lu is out of range\n", + irq_data->parent_irq); goto err; } parent_irq_data = &parent_intc->irqs[irq_data->parent_irq]; - if (!irq_data) { - pr_err("irq-s3c24xx: no irq data found for hwirq %lu\n", - hw); - goto err; - } - parent_irq_data->sub_intc = intc; parent_irq_data->sub_bits |= (1UL << hw); @@ -441,7 +534,7 @@ static void s3c24xx_clear_intc(struct s3c_irq_intc *intc) } } -struct s3c_irq_intc *s3c24xx_init_intc(struct device_node *np, +static struct s3c_irq_intc *s3c24xx_init_intc(struct device_node *np, struct s3c_irq_data *irq_data, struct s3c_irq_intc *parent, unsigned long address) @@ -450,7 +543,6 @@ struct s3c_irq_intc *s3c24xx_init_intc(struct device_node *np, void __iomem *base = (void *)0xf6000000; /* static mapping */ int irq_num; int irq_start; - int irq_offset; int ret; intc = kzalloc(sizeof(struct s3c_irq_intc), GFP_KERNEL); @@ -474,7 +566,6 @@ struct s3c_irq_intc *s3c24xx_init_intc(struct device_node *np, intc->reg_intpnd = base + 0x10; irq_num = 32; irq_start = S3C2410_IRQ(0); - irq_offset = 0; break; case 0x4a000018: pr_debug("irq: found subintc\n"); @@ -482,7 +573,6 @@ struct s3c_irq_intc *s3c24xx_init_intc(struct device_node *np, intc->reg_mask = base + 0x1c; irq_num = 29; irq_start = S3C2410_IRQSUB(0); - irq_offset = 0; break; case 0x4a000040: pr_debug("irq: found intc2\n"); @@ -491,7 +581,6 @@ struct s3c_irq_intc *s3c24xx_init_intc(struct device_node *np, intc->reg_intpnd = base + 0x50; irq_num = 8; irq_start = S3C2416_IRQ(0); - irq_offset = 0; break; case 0x560000a4: pr_debug("irq: found eintc\n"); @@ -499,9 +588,8 @@ struct s3c_irq_intc *s3c24xx_init_intc(struct device_node *np, intc->reg_mask = base + 0xa4; intc->reg_pending = base + 0x08; - irq_num = 20; + irq_num = 24; irq_start = S3C2410_IRQ(32); - irq_offset = 4; break; default: pr_err("irq: unsupported controller address\n"); @@ -512,7 +600,7 @@ struct s3c_irq_intc *s3c24xx_init_intc(struct device_node *np, /* now that all the data is complete, init the irq-domain */ s3c24xx_clear_intc(intc); intc->domain = irq_domain_add_legacy(np, irq_num, irq_start, - irq_offset, &s3c24xx_irq_ops, + 0, &s3c24xx_irq_ops, intc); if (!intc->domain) { pr_err("irq: could not create irq-domain\n"); @@ -520,6 +608,8 @@ struct s3c_irq_intc *s3c24xx_init_intc(struct device_node *np, goto err; } + set_handle_irq(s3c24xx_handle_irq); + return intc; err: @@ -527,12 +617,35 @@ err: return ERR_PTR(ret); } -/* s3c24xx_init_irq - * - * Initialise S3C2410 IRQ system -*/ +static struct s3c_irq_data init_eint[32] = { + { .type = S3C_IRQTYPE_NONE, }, /* reserved */ + { .type = S3C_IRQTYPE_NONE, }, /* reserved */ + { .type = S3C_IRQTYPE_NONE, }, /* reserved */ + { .type = S3C_IRQTYPE_NONE, }, /* reserved */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT4 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT5 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT6 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT7 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT8 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT9 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT10 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT11 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT12 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT13 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT14 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT15 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT16 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT17 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT18 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT19 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT20 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT21 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT22 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT23 */ +}; -static struct s3c_irq_data init_base[32] = { +#ifdef CONFIG_CPU_S3C2410 +static struct s3c_irq_data init_s3c2410base[32] = { { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */ { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */ { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */ @@ -567,11 +680,80 @@ static struct s3c_irq_data init_base[32] = { { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */ }; -static struct s3c_irq_data init_eint[32] = { - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ +static struct s3c_irq_data init_s3c2410subint[32] = { + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */ + { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */ + { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */ +}; + +void __init s3c2410_init_irq(void) +{ +#ifdef CONFIG_FIQ + init_FIQ(FIQ_START); +#endif + + s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2410base[0], NULL, + 0x4a000000); + if (IS_ERR(s3c_intc[0])) { + pr_err("irq: could not create main interrupt controller\n"); + return; + } + + s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2410subint[0], + s3c_intc[0], 0x4a000018); + s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4); +} +#endif + +#ifdef CONFIG_CPU_S3C2412 +static struct s3c_irq_data init_s3c2412base[32] = { + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT0 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT1 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT2 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT3 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */ { .type = S3C_IRQTYPE_NONE, }, /* reserved */ + { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */ + { .type = S3C_IRQTYPE_EDGE, }, /* TICK */ + { .type = S3C_IRQTYPE_EDGE, }, /* WDT */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */ + { .type = S3C_IRQTYPE_EDGE, }, /* LCD */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* SDI/CF */ + { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */ { .type = S3C_IRQTYPE_NONE, }, /* reserved */ + { .type = S3C_IRQTYPE_EDGE, }, /* USBD */ + { .type = S3C_IRQTYPE_EDGE, }, /* USBH */ + { .type = S3C_IRQTYPE_EDGE, }, /* IIC */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* RTC */ + { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */ +}; + +static struct s3c_irq_data init_s3c2412eint[32] = { + { .type = S3C_IRQTYPE_EINT, .parent_irq = 0 }, /* EINT0 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 1 }, /* EINT1 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 2 }, /* EINT2 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 3 }, /* EINT3 */ { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT4 */ { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT5 */ { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT6 */ @@ -594,7 +776,7 @@ static struct s3c_irq_data init_eint[32] = { { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT23 */ }; -static struct s3c_irq_data init_subint[32] = { +static struct s3c_irq_data init_s3c2412subint[32] = { { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */ @@ -606,25 +788,32 @@ static struct s3c_irq_data init_subint[32] = { { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */ { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */ { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */ + { .type = S3C_IRQTYPE_NONE, }, + { .type = S3C_IRQTYPE_NONE, }, + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 21 }, /* SDI */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 21 }, /* CF */ }; -void __init s3c24xx_init_irq(void) +void s3c2412_init_irq(void) { - struct s3c_irq_intc *main_intc; + pr_info("S3C2412: IRQ Support\n"); #ifdef CONFIG_FIQ init_FIQ(FIQ_START); #endif - main_intc = s3c24xx_init_intc(NULL, &init_base[0], NULL, 0x4a000000); - if (IS_ERR(main_intc)) { + s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2412base[0], NULL, + 0x4a000000); + if (IS_ERR(s3c_intc[0])) { pr_err("irq: could not create main interrupt controller\n"); return; } - s3c24xx_init_intc(NULL, &init_subint[0], main_intc, 0x4a000018); - s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4); + s3c24xx_init_intc(NULL, &init_s3c2412eint[0], s3c_intc[0], 0x560000a4); + s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2412subint[0], + s3c_intc[0], 0x4a000018); } +#endif #ifdef CONFIG_CPU_S3C2416 static struct s3c_irq_data init_s3c2416base[32] = { @@ -696,37 +885,185 @@ static struct s3c_irq_data init_s3c2416subint[32] = { static struct s3c_irq_data init_s3c2416_second[32] = { { .type = S3C_IRQTYPE_EDGE }, /* 2D */ - { .type = S3C_IRQTYPE_EDGE }, /* IIC1 */ + { .type = S3C_IRQTYPE_NONE }, /* reserved */ { .type = S3C_IRQTYPE_NONE }, /* reserved */ { .type = S3C_IRQTYPE_NONE }, /* reserved */ { .type = S3C_IRQTYPE_EDGE }, /* PCM0 */ - { .type = S3C_IRQTYPE_EDGE }, /* PCM1 */ + { .type = S3C_IRQTYPE_NONE }, /* reserved */ { .type = S3C_IRQTYPE_EDGE }, /* I2S0 */ - { .type = S3C_IRQTYPE_EDGE }, /* I2S1 */ }; void __init s3c2416_init_irq(void) { - struct s3c_irq_intc *main_intc; - pr_info("S3C2416: IRQ Support\n"); #ifdef CONFIG_FIQ init_FIQ(FIQ_START); #endif - main_intc = s3c24xx_init_intc(NULL, &init_s3c2416base[0], NULL, 0x4a000000); - if (IS_ERR(main_intc)) { + s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2416base[0], NULL, + 0x4a000000); + if (IS_ERR(s3c_intc[0])) { pr_err("irq: could not create main interrupt controller\n"); return; } - s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4); - s3c24xx_init_intc(NULL, &init_s3c2416subint[0], main_intc, 0x4a000018); + s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4); + s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2416subint[0], + s3c_intc[0], 0x4a000018); + + s3c_intc[2] = s3c24xx_init_intc(NULL, &init_s3c2416_second[0], + NULL, 0x4a000040); +} + +#endif + +#ifdef CONFIG_CPU_S3C2440 +static struct s3c_irq_data init_s3c2440base[32] = { + { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* CAM */ + { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */ + { .type = S3C_IRQTYPE_EDGE, }, /* TICK */ + { .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */ + { .type = S3C_IRQTYPE_EDGE, }, /* LCD */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */ + { .type = S3C_IRQTYPE_EDGE, }, /* SDI */ + { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* NFCON */ + { .type = S3C_IRQTYPE_EDGE, }, /* USBD */ + { .type = S3C_IRQTYPE_EDGE, }, /* USBH */ + { .type = S3C_IRQTYPE_EDGE, }, /* IIC */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* RTC */ + { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */ +}; + +static struct s3c_irq_data init_s3c2440subint[32] = { + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */ + { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */ + { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_C */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_P */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */ +}; + +void __init s3c2440_init_irq(void) +{ + pr_info("S3C2440: IRQ Support\n"); - s3c24xx_init_intc(NULL, &init_s3c2416_second[0], NULL, 0x4a000040); +#ifdef CONFIG_FIQ + init_FIQ(FIQ_START); +#endif + + s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2440base[0], NULL, + 0x4a000000); + if (IS_ERR(s3c_intc[0])) { + pr_err("irq: could not create main interrupt controller\n"); + return; + } + + s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4); + s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2440subint[0], + s3c_intc[0], 0x4a000018); } +#endif +#ifdef CONFIG_CPU_S3C2442 +static struct s3c_irq_data init_s3c2442base[32] = { + { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* CAM */ + { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */ + { .type = S3C_IRQTYPE_EDGE, }, /* TICK */ + { .type = S3C_IRQTYPE_EDGE, }, /* WDT */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */ + { .type = S3C_IRQTYPE_EDGE, }, /* LCD */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */ + { .type = S3C_IRQTYPE_EDGE, }, /* SDI */ + { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* NFCON */ + { .type = S3C_IRQTYPE_EDGE, }, /* USBD */ + { .type = S3C_IRQTYPE_EDGE, }, /* USBH */ + { .type = S3C_IRQTYPE_EDGE, }, /* IIC */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* RTC */ + { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */ +}; + +static struct s3c_irq_data init_s3c2442subint[32] = { + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */ + { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */ + { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_C */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_P */ +}; + +void __init s3c2442_init_irq(void) +{ + pr_info("S3C2442: IRQ Support\n"); + +#ifdef CONFIG_FIQ + init_FIQ(FIQ_START); +#endif + + s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2442base[0], NULL, + 0x4a000000); + if (IS_ERR(s3c_intc[0])) { + pr_err("irq: could not create main interrupt controller\n"); + return; + } + + s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4); + s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2442subint[0], + s3c_intc[0], 0x4a000018); +} #endif #ifdef CONFIG_CPU_S3C2443 @@ -800,21 +1137,219 @@ static struct s3c_irq_data init_s3c2443subint[32] = { void __init s3c2443_init_irq(void) { - struct s3c_irq_intc *main_intc; - pr_info("S3C2443: IRQ Support\n"); #ifdef CONFIG_FIQ init_FIQ(FIQ_START); #endif - main_intc = s3c24xx_init_intc(NULL, &init_s3c2443base[0], NULL, 0x4a000000); - if (IS_ERR(main_intc)) { + s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2443base[0], NULL, + 0x4a000000); + if (IS_ERR(s3c_intc[0])) { pr_err("irq: could not create main interrupt controller\n"); return; } - s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4); - s3c24xx_init_intc(NULL, &init_s3c2443subint[0], main_intc, 0x4a000018); + s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4); + s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2443subint[0], + s3c_intc[0], 0x4a000018); +} +#endif + +#ifdef CONFIG_OF +static int s3c24xx_irq_map_of(struct irq_domain *h, unsigned int virq, + irq_hw_number_t hw) +{ + unsigned int ctrl_num = hw / 32; + unsigned int intc_hw = hw % 32; + struct s3c_irq_intc *intc = s3c_intc[ctrl_num]; + struct s3c_irq_intc *parent_intc = intc->parent; + struct s3c_irq_data *irq_data = &intc->irqs[intc_hw]; + + /* attach controller pointer to irq_data */ + irq_data->intc = intc; + irq_data->offset = intc_hw; + + if (!parent_intc) + irq_set_chip_and_handler(virq, &s3c_irq_chip, handle_edge_irq); + else + irq_set_chip_and_handler(virq, &s3c_irq_level_chip, + handle_edge_irq); + + irq_set_chip_data(virq, irq_data); + + set_irq_flags(virq, IRQF_VALID); + + return 0; +} + +/* Translate our of irq notation + * format: <ctrl_num ctrl_irq parent_irq type> + */ +static int s3c24xx_irq_xlate_of(struct irq_domain *d, struct device_node *n, + const u32 *intspec, unsigned int intsize, + irq_hw_number_t *out_hwirq, unsigned int *out_type) +{ + struct s3c_irq_intc *intc; + struct s3c_irq_intc *parent_intc; + struct s3c_irq_data *irq_data; + struct s3c_irq_data *parent_irq_data; + int irqno; + + if (WARN_ON(intsize < 4)) + return -EINVAL; + + if (intspec[0] > 2 || !s3c_intc[intspec[0]]) { + pr_err("controller number %d invalid\n", intspec[0]); + return -EINVAL; + } + intc = s3c_intc[intspec[0]]; + + *out_hwirq = intspec[0] * 32 + intspec[2]; + *out_type = intspec[3] & IRQ_TYPE_SENSE_MASK; + + parent_intc = intc->parent; + if (parent_intc) { + irq_data = &intc->irqs[intspec[2]]; + irq_data->parent_irq = intspec[1]; + parent_irq_data = &parent_intc->irqs[irq_data->parent_irq]; + parent_irq_data->sub_intc = intc; + parent_irq_data->sub_bits |= (1UL << intspec[2]); + + /* parent_intc is always s3c_intc[0], so no offset */ + irqno = irq_create_mapping(parent_intc->domain, intspec[1]); + if (irqno < 0) { + pr_err("irq: could not map parent interrupt\n"); + return irqno; + } + + irq_set_chained_handler(irqno, s3c_irq_demux); + } + + return 0; +} + +static struct irq_domain_ops s3c24xx_irq_ops_of = { + .map = s3c24xx_irq_map_of, + .xlate = s3c24xx_irq_xlate_of, +}; + +struct s3c24xx_irq_of_ctrl { + char *name; + unsigned long offset; + struct s3c_irq_intc **handle; + struct s3c_irq_intc **parent; + struct irq_domain_ops *ops; +}; + +static int __init s3c_init_intc_of(struct device_node *np, + struct device_node *interrupt_parent, + struct s3c24xx_irq_of_ctrl *s3c_ctrl, int num_ctrl) +{ + struct s3c_irq_intc *intc; + struct s3c24xx_irq_of_ctrl *ctrl; + struct irq_domain *domain; + void __iomem *reg_base; + int i; + + reg_base = of_iomap(np, 0); + if (!reg_base) { + pr_err("irq-s3c24xx: could not map irq registers\n"); + return -EINVAL; + } + + domain = irq_domain_add_linear(np, num_ctrl * 32, + &s3c24xx_irq_ops_of, NULL); + if (!domain) { + pr_err("irq: could not create irq-domain\n"); + return -EINVAL; + } + + for (i = 0; i < num_ctrl; i++) { + ctrl = &s3c_ctrl[i]; + + pr_debug("irq: found controller %s\n", ctrl->name); + + intc = kzalloc(sizeof(struct s3c_irq_intc), GFP_KERNEL); + if (!intc) + return -ENOMEM; + + intc->domain = domain; + intc->irqs = kzalloc(sizeof(struct s3c_irq_data) * 32, + GFP_KERNEL); + if (!intc->irqs) { + kfree(intc); + return -ENOMEM; + } + + if (ctrl->parent) { + intc->reg_pending = reg_base + ctrl->offset; + intc->reg_mask = reg_base + ctrl->offset + 0x4; + + if (*(ctrl->parent)) { + intc->parent = *(ctrl->parent); + } else { + pr_warn("irq: parent of %s missing\n", + ctrl->name); + kfree(intc->irqs); + kfree(intc); + continue; + } + } else { + intc->reg_pending = reg_base + ctrl->offset; + intc->reg_mask = reg_base + ctrl->offset + 0x08; + intc->reg_intpnd = reg_base + ctrl->offset + 0x10; + } + + s3c24xx_clear_intc(intc); + s3c_intc[i] = intc; + } + + set_handle_irq(s3c24xx_handle_irq); + + return 0; +} + +static struct s3c24xx_irq_of_ctrl s3c2410_ctrl[] = { + { + .name = "intc", + .offset = 0, + }, { + .name = "subintc", + .offset = 0x18, + .parent = &s3c_intc[0], + } +}; + +int __init s3c2410_init_intc_of(struct device_node *np, + struct device_node *interrupt_parent, + struct s3c24xx_irq_of_ctrl *ctrl, int num_ctrl) +{ + return s3c_init_intc_of(np, interrupt_parent, + s3c2410_ctrl, ARRAY_SIZE(s3c2410_ctrl)); +} +IRQCHIP_DECLARE(s3c2410_irq, "samsung,s3c2410-irq", s3c2410_init_intc_of); + +static struct s3c24xx_irq_of_ctrl s3c2416_ctrl[] = { + { + .name = "intc", + .offset = 0, + }, { + .name = "subintc", + .offset = 0x18, + .parent = &s3c_intc[0], + }, { + .name = "intc2", + .offset = 0x40, + } +}; + +int __init s3c2416_init_intc_of(struct device_node *np, + struct device_node *interrupt_parent, + struct s3c24xx_irq_of_ctrl *ctrl, int num_ctrl) +{ + return s3c_init_intc_of(np, interrupt_parent, + s3c2416_ctrl, ARRAY_SIZE(s3c2416_ctrl)); } +IRQCHIP_DECLARE(s3c2416_irq, "samsung,s3c2416-irq", s3c2416_init_intc_of); #endif diff --git a/drivers/of/base.c b/drivers/of/base.c index 321d3ef..c6443de 100644 --- a/drivers/of/base.c +++ b/drivers/of/base.c @@ -746,6 +746,64 @@ struct device_node *of_find_node_by_phandle(phandle handle) EXPORT_SYMBOL(of_find_node_by_phandle); /** + * of_find_property_value_of_size + * + * @np: device node from which the property value is to be read. + * @propname: name of the property to be searched. + * @len: requested length of property value + * + * Search for a property in a device node and valid the requested size. + * Returns the property value on success, -EINVAL if the property does not + * exist, -ENODATA if property does not have a value, and -EOVERFLOW if the + * property data isn't large enough. + * + */ +static void *of_find_property_value_of_size(const struct device_node *np, + const char *propname, u32 len) +{ + struct property *prop = of_find_property(np, propname, NULL); + + if (!prop) + return ERR_PTR(-EINVAL); + if (!prop->value) + return ERR_PTR(-ENODATA); + if (len > prop->length) + return ERR_PTR(-EOVERFLOW); + + return prop->value; +} + +/** + * of_property_read_u32_index - Find and read a u32 from a multi-value property. + * + * @np: device node from which the property value is to be read. + * @propname: name of the property to be searched. + * @index: index of the u32 in the list of values + * @out_value: pointer to return value, modified only if no error. + * + * Search for a property in a device node and read nth 32-bit value from + * it. Returns 0 on success, -EINVAL if the property does not exist, + * -ENODATA if property does not have a value, and -EOVERFLOW if the + * property data isn't large enough. + * + * The out_value is modified only if a valid u32 value can be decoded. + */ +int of_property_read_u32_index(const struct device_node *np, + const char *propname, + u32 index, u32 *out_value) +{ + const u32 *val = of_find_property_value_of_size(np, propname, + ((index + 1) * sizeof(*out_value))); + + if (IS_ERR(val)) + return PTR_ERR(val); + + *out_value = be32_to_cpup(((__be32 *)val) + index); + return 0; +} +EXPORT_SYMBOL_GPL(of_property_read_u32_index); + +/** * of_property_read_u8_array - Find and read an array of u8 from a property. * * @np: device node from which the property value is to be read. @@ -766,17 +824,12 @@ EXPORT_SYMBOL(of_find_node_by_phandle); int of_property_read_u8_array(const struct device_node *np, const char *propname, u8 *out_values, size_t sz) { - struct property *prop = of_find_property(np, propname, NULL); - const u8 *val; + const u8 *val = of_find_property_value_of_size(np, propname, + (sz * sizeof(*out_values))); - if (!prop) - return -EINVAL; - if (!prop->value) - return -ENODATA; - if ((sz * sizeof(*out_values)) > prop->length) - return -EOVERFLOW; + if (IS_ERR(val)) + return PTR_ERR(val); - val = prop->value; while (sz--) *out_values++ = *val++; return 0; @@ -804,17 +857,12 @@ EXPORT_SYMBOL_GPL(of_property_read_u8_array); int of_property_read_u16_array(const struct device_node *np, const char *propname, u16 *out_values, size_t sz) { - struct property *prop = of_find_property(np, propname, NULL); - const __be16 *val; + const __be16 *val = of_find_property_value_of_size(np, propname, + (sz * sizeof(*out_values))); - if (!prop) - return -EINVAL; - if (!prop->value) - return -ENODATA; - if ((sz * sizeof(*out_values)) > prop->length) - return -EOVERFLOW; + if (IS_ERR(val)) + return PTR_ERR(val); - val = prop->value; while (sz--) *out_values++ = be16_to_cpup(val++); return 0; @@ -841,17 +889,12 @@ int of_property_read_u32_array(const struct device_node *np, const char *propname, u32 *out_values, size_t sz) { - struct property *prop = of_find_property(np, propname, NULL); - const __be32 *val; + const __be32 *val = of_find_property_value_of_size(np, propname, + (sz * sizeof(*out_values))); - if (!prop) - return -EINVAL; - if (!prop->value) - return -ENODATA; - if ((sz * sizeof(*out_values)) > prop->length) - return -EOVERFLOW; + if (IS_ERR(val)) + return PTR_ERR(val); - val = prop->value; while (sz--) *out_values++ = be32_to_cpup(val++); return 0; @@ -874,15 +917,13 @@ EXPORT_SYMBOL_GPL(of_property_read_u32_array); int of_property_read_u64(const struct device_node *np, const char *propname, u64 *out_value) { - struct property *prop = of_find_property(np, propname, NULL); + const __be32 *val = of_find_property_value_of_size(np, propname, + sizeof(*out_value)); - if (!prop) - return -EINVAL; - if (!prop->value) - return -ENODATA; - if (sizeof(*out_value) > prop->length) - return -EOVERFLOW; - *out_value = of_read_number(prop->value, 2); + if (IS_ERR(val)) + return PTR_ERR(val); + + *out_value = of_read_number(val, 2); return 0; } EXPORT_SYMBOL_GPL(of_property_read_u64); diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index 34f51d2..35e9400 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -229,6 +229,7 @@ config PINCTRL_EXYNOS5440 source "drivers/pinctrl/mvebu/Kconfig" source "drivers/pinctrl/sh-pfc/Kconfig" source "drivers/pinctrl/spear/Kconfig" +source "drivers/pinctrl/vt8500/Kconfig" config PINCTRL_XWAY bool diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index f82cc5b..a5a52c8 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -52,3 +52,4 @@ obj-$(CONFIG_PLAT_ORION) += mvebu/ obj-$(CONFIG_ARCH_SHMOBILE) += sh-pfc/ obj-$(CONFIG_SUPERH) += sh-pfc/ obj-$(CONFIG_PLAT_SPEAR) += spear/ +obj-$(CONFIG_ARCH_VT8500) += vt8500/ diff --git a/drivers/pinctrl/pinctrl-bcm2835.c b/drivers/pinctrl/pinctrl-bcm2835.c index 4eb6d2c..2a2e427 100644 --- a/drivers/pinctrl/pinctrl-bcm2835.c +++ b/drivers/pinctrl/pinctrl-bcm2835.c @@ -699,11 +699,6 @@ static int bcm2835_pctl_dt_node_to_map_pull(struct bcm2835_pinctrl *pc, return 0; } -static inline u32 prop_u32(struct property *p, int i) -{ - return be32_to_cpup(((__be32 *)p->value) + i); -} - static int bcm2835_pctl_dt_node_to_map(struct pinctrl_dev *pctldev, struct device_node *np, struct pinctrl_map **map, unsigned *num_maps) @@ -761,7 +756,9 @@ static int bcm2835_pctl_dt_node_to_map(struct pinctrl_dev *pctldev, return -ENOMEM; for (i = 0; i < num_pins; i++) { - pin = prop_u32(pins, i); + err = of_property_read_u32_index(np, "brcm,pins", i, &pin); + if (err) + goto out; if (pin >= ARRAY_SIZE(bcm2835_gpio_pins)) { dev_err(pc->dev, "%s: invalid brcm,pins value %d\n", of_node_full_name(np), pin); @@ -770,14 +767,20 @@ static int bcm2835_pctl_dt_node_to_map(struct pinctrl_dev *pctldev, } if (num_funcs) { - func = prop_u32(funcs, (num_funcs > 1) ? i : 0); + err = of_property_read_u32_index(np, "brcm,function", + (num_funcs > 1) ? i : 0, &func); + if (err) + goto out; err = bcm2835_pctl_dt_node_to_map_func(pc, np, pin, func, &cur_map); if (err) goto out; } if (num_pulls) { - pull = prop_u32(pulls, (num_pulls > 1) ? i : 0); + err = of_property_read_u32_index(np, "brcm,pull", + (num_funcs > 1) ? i : 0, &pull); + if (err) + goto out; err = bcm2835_pctl_dt_node_to_map_pull(pc, np, pin, pull, &cur_map); if (err) diff --git a/drivers/pinctrl/pinctrl-exynos.c b/drivers/pinctrl/pinctrl-exynos.c index 538b9dd..8738933 100644 --- a/drivers/pinctrl/pinctrl-exynos.c +++ b/drivers/pinctrl/pinctrl-exynos.c @@ -677,3 +677,111 @@ struct samsung_pin_ctrl exynos4x12_pin_ctrl[] = { .label = "exynos4x12-gpio-ctrl3", }, }; + +/* pin banks of exynos5250 pin-controller 0 */ +static struct samsung_pin_bank exynos5250_pin_banks0[] = { + EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00), + EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpa1", 0x04), + EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpa2", 0x08), + EXYNOS_PIN_BANK_EINTG(5, 0x060, "gpb0", 0x0c), + EXYNOS_PIN_BANK_EINTG(5, 0x080, "gpb1", 0x10), + EXYNOS_PIN_BANK_EINTG(4, 0x0A0, "gpb2", 0x14), + EXYNOS_PIN_BANK_EINTG(4, 0x0C0, "gpb3", 0x18), + EXYNOS_PIN_BANK_EINTG(7, 0x0E0, "gpc0", 0x1c), + EXYNOS_PIN_BANK_EINTG(4, 0x100, "gpc1", 0x20), + EXYNOS_PIN_BANK_EINTG(7, 0x120, "gpc2", 0x24), + EXYNOS_PIN_BANK_EINTG(7, 0x140, "gpc3", 0x28), + EXYNOS_PIN_BANK_EINTG(4, 0x160, "gpd0", 0x2c), + EXYNOS_PIN_BANK_EINTG(8, 0x180, "gpd1", 0x30), + EXYNOS_PIN_BANK_EINTG(7, 0x2E0, "gpc4", 0x34), + EXYNOS_PIN_BANK_EINTN(6, 0x1A0, "gpy0"), + EXYNOS_PIN_BANK_EINTN(4, 0x1C0, "gpy1"), + EXYNOS_PIN_BANK_EINTN(6, 0x1E0, "gpy2"), + EXYNOS_PIN_BANK_EINTN(8, 0x200, "gpy3"), + EXYNOS_PIN_BANK_EINTN(8, 0x220, "gpy4"), + EXYNOS_PIN_BANK_EINTN(8, 0x240, "gpy5"), + EXYNOS_PIN_BANK_EINTN(8, 0x260, "gpy6"), + EXYNOS_PIN_BANK_EINTW(8, 0xC00, "gpx0", 0x00), + EXYNOS_PIN_BANK_EINTW(8, 0xC20, "gpx1", 0x04), + EXYNOS_PIN_BANK_EINTW(8, 0xC40, "gpx2", 0x08), + EXYNOS_PIN_BANK_EINTW(8, 0xC60, "gpx3", 0x0c), +}; + +/* pin banks of exynos5250 pin-controller 1 */ +static struct samsung_pin_bank exynos5250_pin_banks1[] = { + EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpe0", 0x00), + EXYNOS_PIN_BANK_EINTG(2, 0x020, "gpe1", 0x04), + EXYNOS_PIN_BANK_EINTG(4, 0x040, "gpf0", 0x08), + EXYNOS_PIN_BANK_EINTG(4, 0x060, "gpf1", 0x0c), + EXYNOS_PIN_BANK_EINTG(8, 0x080, "gpg0", 0x10), + EXYNOS_PIN_BANK_EINTG(8, 0x0A0, "gpg1", 0x14), + EXYNOS_PIN_BANK_EINTG(2, 0x0C0, "gpg2", 0x18), + EXYNOS_PIN_BANK_EINTG(4, 0x0E0, "gph0", 0x1c), + EXYNOS_PIN_BANK_EINTG(8, 0x100, "gph1", 0x20), +}; + +/* pin banks of exynos5250 pin-controller 2 */ +static struct samsung_pin_bank exynos5250_pin_banks2[] = { + EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpv0", 0x00), + EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpv1", 0x04), + EXYNOS_PIN_BANK_EINTG(8, 0x060, "gpv2", 0x08), + EXYNOS_PIN_BANK_EINTG(8, 0x080, "gpv3", 0x0c), + EXYNOS_PIN_BANK_EINTG(2, 0x0C0, "gpv4", 0x10), +}; + +/* pin banks of exynos5250 pin-controller 3 */ +static struct samsung_pin_bank exynos5250_pin_banks3[] = { + EXYNOS_PIN_BANK_EINTG(7, 0x000, "gpz", 0x00), +}; + +/* + * Samsung pinctrl driver data for Exynos5250 SoC. Exynos5250 SoC includes + * four gpio/pin-mux/pinconfig controllers. + */ +struct samsung_pin_ctrl exynos5250_pin_ctrl[] = { + { + /* pin-controller instance 0 data */ + .pin_banks = exynos5250_pin_banks0, + .nr_banks = ARRAY_SIZE(exynos5250_pin_banks0), + .geint_con = EXYNOS_GPIO_ECON_OFFSET, + .geint_mask = EXYNOS_GPIO_EMASK_OFFSET, + .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, + .weint_con = EXYNOS_WKUP_ECON_OFFSET, + .weint_mask = EXYNOS_WKUP_EMASK_OFFSET, + .weint_pend = EXYNOS_WKUP_EPEND_OFFSET, + .svc = EXYNOS_SVC_OFFSET, + .eint_gpio_init = exynos_eint_gpio_init, + .eint_wkup_init = exynos_eint_wkup_init, + .label = "exynos5250-gpio-ctrl0", + }, { + /* pin-controller instance 1 data */ + .pin_banks = exynos5250_pin_banks1, + .nr_banks = ARRAY_SIZE(exynos5250_pin_banks1), + .geint_con = EXYNOS_GPIO_ECON_OFFSET, + .geint_mask = EXYNOS_GPIO_EMASK_OFFSET, + .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, + .svc = EXYNOS_SVC_OFFSET, + .eint_gpio_init = exynos_eint_gpio_init, + .label = "exynos5250-gpio-ctrl1", + }, { + /* pin-controller instance 2 data */ + .pin_banks = exynos5250_pin_banks2, + .nr_banks = ARRAY_SIZE(exynos5250_pin_banks2), + .geint_con = EXYNOS_GPIO_ECON_OFFSET, + .geint_mask = EXYNOS_GPIO_EMASK_OFFSET, + .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, + .svc = EXYNOS_SVC_OFFSET, + .eint_gpio_init = exynos_eint_gpio_init, + .label = "exynos5250-gpio-ctrl2", + }, { + /* pin-controller instance 3 data */ + .pin_banks = exynos5250_pin_banks3, + .nr_banks = ARRAY_SIZE(exynos5250_pin_banks3), + .geint_con = EXYNOS_GPIO_ECON_OFFSET, + .geint_mask = EXYNOS_GPIO_EMASK_OFFSET, + .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, + .svc = EXYNOS_SVC_OFFSET, + .eint_gpio_init = exynos_eint_gpio_init, + .label = "exynos5250-gpio-ctrl3", + }, +}; diff --git a/drivers/pinctrl/pinctrl-samsung.c b/drivers/pinctrl/pinctrl-samsung.c index f206df1..3d5cf63 100644 --- a/drivers/pinctrl/pinctrl-samsung.c +++ b/drivers/pinctrl/pinctrl-samsung.c @@ -948,6 +948,8 @@ static const struct of_device_id samsung_pinctrl_dt_match[] = { .data = (void *)exynos4210_pin_ctrl }, { .compatible = "samsung,exynos4x12-pinctrl", .data = (void *)exynos4x12_pin_ctrl }, + { .compatible = "samsung,exynos5250-pinctrl", + .data = (void *)exynos5250_pin_ctrl }, {}, }; MODULE_DEVICE_TABLE(of, samsung_pinctrl_dt_match); diff --git a/drivers/pinctrl/pinctrl-samsung.h b/drivers/pinctrl/pinctrl-samsung.h index e2d4e67..ee964aa 100644 --- a/drivers/pinctrl/pinctrl-samsung.h +++ b/drivers/pinctrl/pinctrl-samsung.h @@ -237,5 +237,6 @@ struct samsung_pmx_func { /* list of all exported SoC specific data */ extern struct samsung_pin_ctrl exynos4210_pin_ctrl[]; extern struct samsung_pin_ctrl exynos4x12_pin_ctrl[]; +extern struct samsung_pin_ctrl exynos5250_pin_ctrl[]; #endif /* __PINCTRL_SAMSUNG_H */ diff --git a/drivers/pinctrl/sh-pfc/pfc-sh73a0.c b/drivers/pinctrl/sh-pfc/pfc-sh73a0.c index 709008e..6f15c03 100644 --- a/drivers/pinctrl/sh-pfc/pfc-sh73a0.c +++ b/drivers/pinctrl/sh-pfc/pfc-sh73a0.c @@ -2733,9 +2733,9 @@ static struct pinmux_data_reg pinmux_data_regs[] = { { }, }; -/* IRQ pins through INTCS with IRQ0->15 from 0x200 and IRQ16-31 from 0x3200 */ -#define EXT_IRQ16L(n) intcs_evt2irq(0x200 + ((n) << 5)) -#define EXT_IRQ16H(n) intcs_evt2irq(0x3200 + ((n - 16) << 5)) +/* External IRQ pins mapped at IRQPIN_BASE */ +#define EXT_IRQ16L(n) irq_pin(n) +#define EXT_IRQ16H(n) irq_pin(n) static struct pinmux_irq pinmux_irqs[] = { PINMUX_IRQ(EXT_IRQ16H(19), PORT9_FN0), diff --git a/drivers/pinctrl/vt8500/Kconfig b/drivers/pinctrl/vt8500/Kconfig new file mode 100644 index 0000000..55724a7 --- /dev/null +++ b/drivers/pinctrl/vt8500/Kconfig @@ -0,0 +1,52 @@ +# +# VIA/Wondermedia PINCTRL drivers +# + +if ARCH_VT8500 + +config PINCTRL_WMT + bool + select PINMUX + select GENERIC_PINCONF + +config PINCTRL_VT8500 + bool "VIA VT8500 pin controller driver" + depends on ARCH_WM8505 + select PINCTRL_WMT + help + Say yes here to support the gpio/pin control module on + VIA VT8500 SoCs. + +config PINCTRL_WM8505 + bool "Wondermedia WM8505 pin controller driver" + depends on ARCH_WM8505 + select PINCTRL_WMT + help + Say yes here to support the gpio/pin control module on + Wondermedia WM8505 SoCs. + +config PINCTRL_WM8650 + bool "Wondermedia WM8650 pin controller driver" + depends on ARCH_WM8505 + select PINCTRL_WMT + help + Say yes here to support the gpio/pin control module on + Wondermedia WM8650 SoCs. + +config PINCTRL_WM8750 + bool "Wondermedia WM8750 pin controller driver" + depends on ARCH_WM8750 + select PINCTRL_WMT + help + Say yes here to support the gpio/pin control module on + Wondermedia WM8750 SoCs. + +config PINCTRL_WM8850 + bool "Wondermedia WM8850 pin controller driver" + depends on ARCH_WM8850 + select PINCTRL_WMT + help + Say yes here to support the gpio/pin control module on + Wondermedia WM8850 SoCs. + +endif diff --git a/drivers/pinctrl/vt8500/Makefile b/drivers/pinctrl/vt8500/Makefile new file mode 100644 index 0000000..24ec45d --- /dev/null +++ b/drivers/pinctrl/vt8500/Makefile @@ -0,0 +1,8 @@ +# VIA/Wondermedia pinctrl support + +obj-$(CONFIG_PINCTRL_WMT) += pinctrl-wmt.o +obj-$(CONFIG_PINCTRL_VT8500) += pinctrl-vt8500.o +obj-$(CONFIG_PINCTRL_WM8505) += pinctrl-wm8505.o +obj-$(CONFIG_PINCTRL_WM8650) += pinctrl-wm8650.o +obj-$(CONFIG_PINCTRL_WM8750) += pinctrl-wm8750.o +obj-$(CONFIG_PINCTRL_WM8850) += pinctrl-wm8850.o diff --git a/drivers/pinctrl/vt8500/pinctrl-vt8500.c b/drivers/pinctrl/vt8500/pinctrl-vt8500.c new file mode 100644 index 0000000..f2fe9f8 --- /dev/null +++ b/drivers/pinctrl/vt8500/pinctrl-vt8500.c @@ -0,0 +1,501 @@ +/* + * Pinctrl data for VIA VT8500 SoC + * + * Copyright (c) 2013 Tony Prisk <linux@prisktech.co.nz> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include <linux/io.h> +#include <linux/module.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +#include "pinctrl-wmt.h" + +/* + * Describe the register offsets within the GPIO memory space + * The dedicated external GPIO's should always be listed in bank 0 + * so they are exported in the 0..31 range which is what users + * expect. + * + * Do not reorder these banks as it will change the pin numbering + */ +static const struct wmt_pinctrl_bank_registers vt8500_banks[] = { + WMT_PINCTRL_BANK(NO_REG, 0x3C, 0x5C, 0x7C, NO_REG, NO_REG), /* 0 */ + WMT_PINCTRL_BANK(0x00, 0x20, 0x40, 0x60, NO_REG, NO_REG), /* 1 */ + WMT_PINCTRL_BANK(0x04, 0x24, 0x44, 0x64, NO_REG, NO_REG), /* 2 */ + WMT_PINCTRL_BANK(0x08, 0x28, 0x48, 0x68, NO_REG, NO_REG), /* 3 */ + WMT_PINCTRL_BANK(0x0C, 0x2C, 0x4C, 0x6C, NO_REG, NO_REG), /* 4 */ + WMT_PINCTRL_BANK(0x10, 0x30, 0x50, 0x70, NO_REG, NO_REG), /* 5 */ + WMT_PINCTRL_BANK(0x14, 0x34, 0x54, 0x74, NO_REG, NO_REG), /* 6 */ +}; + +/* Please keep sorted by bank/bit */ +#define WMT_PIN_EXTGPIO0 WMT_PIN(0, 0) +#define WMT_PIN_EXTGPIO1 WMT_PIN(0, 1) +#define WMT_PIN_EXTGPIO2 WMT_PIN(0, 2) +#define WMT_PIN_EXTGPIO3 WMT_PIN(0, 3) +#define WMT_PIN_EXTGPIO4 WMT_PIN(0, 4) +#define WMT_PIN_EXTGPIO5 WMT_PIN(0, 5) +#define WMT_PIN_EXTGPIO6 WMT_PIN(0, 6) +#define WMT_PIN_EXTGPIO7 WMT_PIN(0, 7) +#define WMT_PIN_EXTGPIO8 WMT_PIN(0, 8) +#define WMT_PIN_UART0RTS WMT_PIN(1, 0) +#define WMT_PIN_UART0TXD WMT_PIN(1, 1) +#define WMT_PIN_UART0CTS WMT_PIN(1, 2) +#define WMT_PIN_UART0RXD WMT_PIN(1, 3) +#define WMT_PIN_UART1RTS WMT_PIN(1, 4) +#define WMT_PIN_UART1TXD WMT_PIN(1, 5) +#define WMT_PIN_UART1CTS WMT_PIN(1, 6) +#define WMT_PIN_UART1RXD WMT_PIN(1, 7) +#define WMT_PIN_SPI0CLK WMT_PIN(1, 8) +#define WMT_PIN_SPI0SS WMT_PIN(1, 9) +#define WMT_PIN_SPI0MISO WMT_PIN(1, 10) +#define WMT_PIN_SPI0MOSI WMT_PIN(1, 11) +#define WMT_PIN_SPI1CLK WMT_PIN(1, 12) +#define WMT_PIN_SPI1SS WMT_PIN(1, 13) +#define WMT_PIN_SPI1MISO WMT_PIN(1, 14) +#define WMT_PIN_SPI1MOSI WMT_PIN(1, 15) +#define WMT_PIN_SPI2CLK WMT_PIN(1, 16) +#define WMT_PIN_SPI2SS WMT_PIN(1, 17) +#define WMT_PIN_SPI2MISO WMT_PIN(1, 18) +#define WMT_PIN_SPI2MOSI WMT_PIN(1, 19) +#define WMT_PIN_SDDATA0 WMT_PIN(2, 0) +#define WMT_PIN_SDDATA1 WMT_PIN(2, 1) +#define WMT_PIN_SDDATA2 WMT_PIN(2, 2) +#define WMT_PIN_SDDATA3 WMT_PIN(2, 3) +#define WMT_PIN_MMCDATA0 WMT_PIN(2, 4) +#define WMT_PIN_MMCDATA1 WMT_PIN(2, 5) +#define WMT_PIN_MMCDATA2 WMT_PIN(2, 6) +#define WMT_PIN_MMCDATA3 WMT_PIN(2, 7) +#define WMT_PIN_SDCLK WMT_PIN(2, 8) +#define WMT_PIN_SDWP WMT_PIN(2, 9) +#define WMT_PIN_SDCMD WMT_PIN(2, 10) +#define WMT_PIN_MSDATA0 WMT_PIN(2, 16) +#define WMT_PIN_MSDATA1 WMT_PIN(2, 17) +#define WMT_PIN_MSDATA2 WMT_PIN(2, 18) +#define WMT_PIN_MSDATA3 WMT_PIN(2, 19) +#define WMT_PIN_MSCLK WMT_PIN(2, 20) +#define WMT_PIN_MSBS WMT_PIN(2, 21) +#define WMT_PIN_MSINS WMT_PIN(2, 22) +#define WMT_PIN_I2C0SCL WMT_PIN(2, 24) +#define WMT_PIN_I2C0SDA WMT_PIN(2, 25) +#define WMT_PIN_I2C1SCL WMT_PIN(2, 26) +#define WMT_PIN_I2C1SDA WMT_PIN(2, 27) +#define WMT_PIN_MII0RXD0 WMT_PIN(3, 0) +#define WMT_PIN_MII0RXD1 WMT_PIN(3, 1) +#define WMT_PIN_MII0RXD2 WMT_PIN(3, 2) +#define WMT_PIN_MII0RXD3 WMT_PIN(3, 3) +#define WMT_PIN_MII0RXCLK WMT_PIN(3, 4) +#define WMT_PIN_MII0RXDV WMT_PIN(3, 5) +#define WMT_PIN_MII0RXERR WMT_PIN(3, 6) +#define WMT_PIN_MII0PHYRST WMT_PIN(3, 7) +#define WMT_PIN_MII0TXD0 WMT_PIN(3, 8) +#define WMT_PIN_MII0TXD1 WMT_PIN(3, 9) +#define WMT_PIN_MII0TXD2 WMT_PIN(3, 10) +#define WMT_PIN_MII0TXD3 WMT_PIN(3, 11) +#define WMT_PIN_MII0TXCLK WMT_PIN(3, 12) +#define WMT_PIN_MII0TXEN WMT_PIN(3, 13) +#define WMT_PIN_MII0TXERR WMT_PIN(3, 14) +#define WMT_PIN_MII0PHYPD WMT_PIN(3, 15) +#define WMT_PIN_MII0COL WMT_PIN(3, 16) +#define WMT_PIN_MII0CRS WMT_PIN(3, 17) +#define WMT_PIN_MII0MDIO WMT_PIN(3, 18) +#define WMT_PIN_MII0MDC WMT_PIN(3, 19) +#define WMT_PIN_SEECS WMT_PIN(3, 20) +#define WMT_PIN_SEECK WMT_PIN(3, 21) +#define WMT_PIN_SEEDI WMT_PIN(3, 22) +#define WMT_PIN_SEEDO WMT_PIN(3, 23) +#define WMT_PIN_IDEDREQ0 WMT_PIN(3, 24) +#define WMT_PIN_IDEDREQ1 WMT_PIN(3, 25) +#define WMT_PIN_IDEIOW WMT_PIN(3, 26) +#define WMT_PIN_IDEIOR WMT_PIN(3, 27) +#define WMT_PIN_IDEDACK WMT_PIN(3, 28) +#define WMT_PIN_IDEIORDY WMT_PIN(3, 29) +#define WMT_PIN_IDEINTRQ WMT_PIN(3, 30) +#define WMT_PIN_VDIN0 WMT_PIN(4, 0) +#define WMT_PIN_VDIN1 WMT_PIN(4, 1) +#define WMT_PIN_VDIN2 WMT_PIN(4, 2) +#define WMT_PIN_VDIN3 WMT_PIN(4, 3) +#define WMT_PIN_VDIN4 WMT_PIN(4, 4) +#define WMT_PIN_VDIN5 WMT_PIN(4, 5) +#define WMT_PIN_VDIN6 WMT_PIN(4, 6) +#define WMT_PIN_VDIN7 WMT_PIN(4, 7) +#define WMT_PIN_VDOUT0 WMT_PIN(4, 8) +#define WMT_PIN_VDOUT1 WMT_PIN(4, 9) +#define WMT_PIN_VDOUT2 WMT_PIN(4, 10) +#define WMT_PIN_VDOUT3 WMT_PIN(4, 11) +#define WMT_PIN_VDOUT4 WMT_PIN(4, 12) +#define WMT_PIN_VDOUT5 WMT_PIN(4, 13) +#define WMT_PIN_NANDCLE0 WMT_PIN(4, 14) +#define WMT_PIN_NANDCLE1 WMT_PIN(4, 15) +#define WMT_PIN_VDOUT6_7 WMT_PIN(4, 16) +#define WMT_PIN_VHSYNC WMT_PIN(4, 17) +#define WMT_PIN_VVSYNC WMT_PIN(4, 18) +#define WMT_PIN_TSDIN0 WMT_PIN(5, 8) +#define WMT_PIN_TSDIN1 WMT_PIN(5, 9) +#define WMT_PIN_TSDIN2 WMT_PIN(5, 10) +#define WMT_PIN_TSDIN3 WMT_PIN(5, 11) +#define WMT_PIN_TSDIN4 WMT_PIN(5, 12) +#define WMT_PIN_TSDIN5 WMT_PIN(5, 13) +#define WMT_PIN_TSDIN6 WMT_PIN(5, 14) +#define WMT_PIN_TSDIN7 WMT_PIN(5, 15) +#define WMT_PIN_TSSYNC WMT_PIN(5, 16) +#define WMT_PIN_TSVALID WMT_PIN(5, 17) +#define WMT_PIN_TSCLK WMT_PIN(5, 18) +#define WMT_PIN_LCDD0 WMT_PIN(6, 0) +#define WMT_PIN_LCDD1 WMT_PIN(6, 1) +#define WMT_PIN_LCDD2 WMT_PIN(6, 2) +#define WMT_PIN_LCDD3 WMT_PIN(6, 3) +#define WMT_PIN_LCDD4 WMT_PIN(6, 4) +#define WMT_PIN_LCDD5 WMT_PIN(6, 5) +#define WMT_PIN_LCDD6 WMT_PIN(6, 6) +#define WMT_PIN_LCDD7 WMT_PIN(6, 7) +#define WMT_PIN_LCDD8 WMT_PIN(6, 8) +#define WMT_PIN_LCDD9 WMT_PIN(6, 9) +#define WMT_PIN_LCDD10 WMT_PIN(6, 10) +#define WMT_PIN_LCDD11 WMT_PIN(6, 11) +#define WMT_PIN_LCDD12 WMT_PIN(6, 12) +#define WMT_PIN_LCDD13 WMT_PIN(6, 13) +#define WMT_PIN_LCDD14 WMT_PIN(6, 14) +#define WMT_PIN_LCDD15 WMT_PIN(6, 15) +#define WMT_PIN_LCDD16 WMT_PIN(6, 16) +#define WMT_PIN_LCDD17 WMT_PIN(6, 17) +#define WMT_PIN_LCDCLK WMT_PIN(6, 18) +#define WMT_PIN_LCDDEN WMT_PIN(6, 19) +#define WMT_PIN_LCDLINE WMT_PIN(6, 20) +#define WMT_PIN_LCDFRM WMT_PIN(6, 21) +#define WMT_PIN_LCDBIAS WMT_PIN(6, 22) + +static const struct pinctrl_pin_desc vt8500_pins[] = { + PINCTRL_PIN(WMT_PIN_EXTGPIO0, "extgpio0"), + PINCTRL_PIN(WMT_PIN_EXTGPIO1, "extgpio1"), + PINCTRL_PIN(WMT_PIN_EXTGPIO2, "extgpio2"), + PINCTRL_PIN(WMT_PIN_EXTGPIO3, "extgpio3"), + PINCTRL_PIN(WMT_PIN_EXTGPIO4, "extgpio4"), + PINCTRL_PIN(WMT_PIN_EXTGPIO5, "extgpio5"), + PINCTRL_PIN(WMT_PIN_EXTGPIO6, "extgpio6"), + PINCTRL_PIN(WMT_PIN_EXTGPIO7, "extgpio7"), + PINCTRL_PIN(WMT_PIN_EXTGPIO8, "extgpio8"), + PINCTRL_PIN(WMT_PIN_UART0RTS, "uart0_rts"), + PINCTRL_PIN(WMT_PIN_UART0TXD, "uart0_txd"), + PINCTRL_PIN(WMT_PIN_UART0CTS, "uart0_cts"), + PINCTRL_PIN(WMT_PIN_UART0RXD, "uart0_rxd"), + PINCTRL_PIN(WMT_PIN_UART1RTS, "uart1_rts"), + PINCTRL_PIN(WMT_PIN_UART1TXD, "uart1_txd"), + PINCTRL_PIN(WMT_PIN_UART1CTS, "uart1_cts"), + PINCTRL_PIN(WMT_PIN_UART1RXD, "uart1_rxd"), + PINCTRL_PIN(WMT_PIN_SPI0CLK, "spi0_clk"), + PINCTRL_PIN(WMT_PIN_SPI0SS, "spi0_ss"), + PINCTRL_PIN(WMT_PIN_SPI0MISO, "spi0_miso"), + PINCTRL_PIN(WMT_PIN_SPI0MOSI, "spi0_mosi"), + PINCTRL_PIN(WMT_PIN_SPI1CLK, "spi1_clk"), + PINCTRL_PIN(WMT_PIN_SPI1SS, "spi1_ss"), + PINCTRL_PIN(WMT_PIN_SPI1MISO, "spi1_miso"), + PINCTRL_PIN(WMT_PIN_SPI1MOSI, "spi1_mosi"), + PINCTRL_PIN(WMT_PIN_SPI2CLK, "spi2_clk"), + PINCTRL_PIN(WMT_PIN_SPI2SS, "spi2_ss"), + PINCTRL_PIN(WMT_PIN_SPI2MISO, "spi2_miso"), + PINCTRL_PIN(WMT_PIN_SPI2MOSI, "spi2_mosi"), + PINCTRL_PIN(WMT_PIN_SDDATA0, "sd_data0"), + PINCTRL_PIN(WMT_PIN_SDDATA1, "sd_data1"), + PINCTRL_PIN(WMT_PIN_SDDATA2, "sd_data2"), + PINCTRL_PIN(WMT_PIN_SDDATA3, "sd_data3"), + PINCTRL_PIN(WMT_PIN_MMCDATA0, "mmc_data0"), + PINCTRL_PIN(WMT_PIN_MMCDATA1, "mmc_data1"), + PINCTRL_PIN(WMT_PIN_MMCDATA2, "mmc_data2"), + PINCTRL_PIN(WMT_PIN_MMCDATA3, "mmc_data3"), + PINCTRL_PIN(WMT_PIN_SDCLK, "sd_clk"), + PINCTRL_PIN(WMT_PIN_SDWP, "sd_wp"), + PINCTRL_PIN(WMT_PIN_SDCMD, "sd_cmd"), + PINCTRL_PIN(WMT_PIN_MSDATA0, "ms_data0"), + PINCTRL_PIN(WMT_PIN_MSDATA1, "ms_data1"), + PINCTRL_PIN(WMT_PIN_MSDATA2, "ms_data2"), + PINCTRL_PIN(WMT_PIN_MSDATA3, "ms_data3"), + PINCTRL_PIN(WMT_PIN_MSCLK, "ms_clk"), + PINCTRL_PIN(WMT_PIN_MSBS, "ms_bs"), + PINCTRL_PIN(WMT_PIN_MSINS, "ms_ins"), + PINCTRL_PIN(WMT_PIN_I2C0SCL, "i2c0_scl"), + PINCTRL_PIN(WMT_PIN_I2C0SDA, "i2c0_sda"), + PINCTRL_PIN(WMT_PIN_I2C1SCL, "i2c1_scl"), + PINCTRL_PIN(WMT_PIN_I2C1SDA, "i2c1_sda"), + PINCTRL_PIN(WMT_PIN_MII0RXD0, "mii0_rxd0"), + PINCTRL_PIN(WMT_PIN_MII0RXD1, "mii0_rxd1"), + PINCTRL_PIN(WMT_PIN_MII0RXD2, "mii0_rxd2"), + PINCTRL_PIN(WMT_PIN_MII0RXD3, "mii0_rxd3"), + PINCTRL_PIN(WMT_PIN_MII0RXCLK, "mii0_rxclk"), + PINCTRL_PIN(WMT_PIN_MII0RXDV, "mii0_rxdv"), + PINCTRL_PIN(WMT_PIN_MII0RXERR, "mii0_rxerr"), + PINCTRL_PIN(WMT_PIN_MII0PHYRST, "mii0_phyrst"), + PINCTRL_PIN(WMT_PIN_MII0TXD0, "mii0_txd0"), + PINCTRL_PIN(WMT_PIN_MII0TXD1, "mii0_txd1"), + PINCTRL_PIN(WMT_PIN_MII0TXD2, "mii0_txd2"), + PINCTRL_PIN(WMT_PIN_MII0TXD3, "mii0_txd3"), + PINCTRL_PIN(WMT_PIN_MII0TXCLK, "mii0_txclk"), + PINCTRL_PIN(WMT_PIN_MII0TXEN, "mii0_txen"), + PINCTRL_PIN(WMT_PIN_MII0TXERR, "mii0_txerr"), + PINCTRL_PIN(WMT_PIN_MII0PHYPD, "mii0_phypd"), + PINCTRL_PIN(WMT_PIN_MII0COL, "mii0_col"), + PINCTRL_PIN(WMT_PIN_MII0CRS, "mii0_crs"), + PINCTRL_PIN(WMT_PIN_MII0MDIO, "mii0_mdio"), + PINCTRL_PIN(WMT_PIN_MII0MDC, "mii0_mdc"), + PINCTRL_PIN(WMT_PIN_SEECS, "see_cs"), + PINCTRL_PIN(WMT_PIN_SEECK, "see_ck"), + PINCTRL_PIN(WMT_PIN_SEEDI, "see_di"), + PINCTRL_PIN(WMT_PIN_SEEDO, "see_do"), + PINCTRL_PIN(WMT_PIN_IDEDREQ0, "ide_dreq0"), + PINCTRL_PIN(WMT_PIN_IDEDREQ1, "ide_dreq1"), + PINCTRL_PIN(WMT_PIN_IDEIOW, "ide_iow"), + PINCTRL_PIN(WMT_PIN_IDEIOR, "ide_ior"), + PINCTRL_PIN(WMT_PIN_IDEDACK, "ide_dack"), + PINCTRL_PIN(WMT_PIN_IDEIORDY, "ide_iordy"), + PINCTRL_PIN(WMT_PIN_IDEINTRQ, "ide_intrq"), + PINCTRL_PIN(WMT_PIN_VDIN0, "vdin0"), + PINCTRL_PIN(WMT_PIN_VDIN1, "vdin1"), + PINCTRL_PIN(WMT_PIN_VDIN2, "vdin2"), + PINCTRL_PIN(WMT_PIN_VDIN3, "vdin3"), + PINCTRL_PIN(WMT_PIN_VDIN4, "vdin4"), + PINCTRL_PIN(WMT_PIN_VDIN5, "vdin5"), + PINCTRL_PIN(WMT_PIN_VDIN6, "vdin6"), + PINCTRL_PIN(WMT_PIN_VDIN7, "vdin7"), + PINCTRL_PIN(WMT_PIN_VDOUT0, "vdout0"), + PINCTRL_PIN(WMT_PIN_VDOUT1, "vdout1"), + PINCTRL_PIN(WMT_PIN_VDOUT2, "vdout2"), + PINCTRL_PIN(WMT_PIN_VDOUT3, "vdout3"), + PINCTRL_PIN(WMT_PIN_VDOUT4, "vdout4"), + PINCTRL_PIN(WMT_PIN_VDOUT5, "vdout5"), + PINCTRL_PIN(WMT_PIN_NANDCLE0, "nand_cle0"), + PINCTRL_PIN(WMT_PIN_NANDCLE1, "nand_cle1"), + PINCTRL_PIN(WMT_PIN_VDOUT6_7, "vdout6_7"), + PINCTRL_PIN(WMT_PIN_VHSYNC, "vhsync"), + PINCTRL_PIN(WMT_PIN_VVSYNC, "vvsync"), + PINCTRL_PIN(WMT_PIN_TSDIN0, "tsdin0"), + PINCTRL_PIN(WMT_PIN_TSDIN1, "tsdin1"), + PINCTRL_PIN(WMT_PIN_TSDIN2, "tsdin2"), + PINCTRL_PIN(WMT_PIN_TSDIN3, "tsdin3"), + PINCTRL_PIN(WMT_PIN_TSDIN4, "tsdin4"), + PINCTRL_PIN(WMT_PIN_TSDIN5, "tsdin5"), + PINCTRL_PIN(WMT_PIN_TSDIN6, "tsdin6"), + PINCTRL_PIN(WMT_PIN_TSDIN7, "tsdin7"), + PINCTRL_PIN(WMT_PIN_TSSYNC, "tssync"), + PINCTRL_PIN(WMT_PIN_TSVALID, "tsvalid"), + PINCTRL_PIN(WMT_PIN_TSCLK, "tsclk"), + PINCTRL_PIN(WMT_PIN_LCDD0, "lcd_d0"), + PINCTRL_PIN(WMT_PIN_LCDD1, "lcd_d1"), + PINCTRL_PIN(WMT_PIN_LCDD2, "lcd_d2"), + PINCTRL_PIN(WMT_PIN_LCDD3, "lcd_d3"), + PINCTRL_PIN(WMT_PIN_LCDD4, "lcd_d4"), + PINCTRL_PIN(WMT_PIN_LCDD5, "lcd_d5"), + PINCTRL_PIN(WMT_PIN_LCDD6, "lcd_d6"), + PINCTRL_PIN(WMT_PIN_LCDD7, "lcd_d7"), + PINCTRL_PIN(WMT_PIN_LCDD8, "lcd_d8"), + PINCTRL_PIN(WMT_PIN_LCDD9, "lcd_d9"), + PINCTRL_PIN(WMT_PIN_LCDD10, "lcd_d10"), + PINCTRL_PIN(WMT_PIN_LCDD11, "lcd_d11"), + PINCTRL_PIN(WMT_PIN_LCDD12, "lcd_d12"), + PINCTRL_PIN(WMT_PIN_LCDD13, "lcd_d13"), + PINCTRL_PIN(WMT_PIN_LCDD14, "lcd_d14"), + PINCTRL_PIN(WMT_PIN_LCDD15, "lcd_d15"), + PINCTRL_PIN(WMT_PIN_LCDD16, "lcd_d16"), + PINCTRL_PIN(WMT_PIN_LCDD17, "lcd_d17"), + PINCTRL_PIN(WMT_PIN_LCDCLK, "lcd_clk"), + PINCTRL_PIN(WMT_PIN_LCDDEN, "lcd_den"), + PINCTRL_PIN(WMT_PIN_LCDLINE, "lcd_line"), + PINCTRL_PIN(WMT_PIN_LCDFRM, "lcd_frm"), + PINCTRL_PIN(WMT_PIN_LCDBIAS, "lcd_bias"), +}; + +/* Order of these names must match the above list */ +static const char * const vt8500_groups[] = { + "extgpio0", + "extgpio1", + "extgpio2", + "extgpio3", + "extgpio4", + "extgpio5", + "extgpio6", + "extgpio7", + "extgpio8", + "uart0_rts", + "uart0_txd", + "uart0_cts", + "uart0_rxd", + "uart1_rts", + "uart1_txd", + "uart1_cts", + "uart1_rxd", + "spi0_clk", + "spi0_ss", + "spi0_miso", + "spi0_mosi", + "spi1_clk", + "spi1_ss", + "spi1_miso", + "spi1_mosi", + "spi2_clk", + "spi2_ss", + "spi2_miso", + "spi2_mosi", + "sd_data0", + "sd_data1", + "sd_data2", + "sd_data3", + "mmc_data0", + "mmc_data1", + "mmc_data2", + "mmc_data3", + "sd_clk", + "sd_wp", + "sd_cmd", + "ms_data0", + "ms_data1", + "ms_data2", + "ms_data3", + "ms_clk", + "ms_bs", + "ms_ins", + "i2c0_scl", + "i2c0_sda", + "i2c1_scl", + "i2c1_sda", + "mii0_rxd0", + "mii0_rxd1", + "mii0_rxd2", + "mii0_rxd3", + "mii0_rxclk", + "mii0_rxdv", + "mii0_rxerr", + "mii0_phyrst", + "mii0_txd0", + "mii0_txd1", + "mii0_txd2", + "mii0_txd3", + "mii0_txclk", + "mii0_txen", + "mii0_txerr", + "mii0_phypd", + "mii0_col", + "mii0_crs", + "mii0_mdio", + "mii0_mdc", + "see_cs", + "see_ck", + "see_di", + "see_do", + "ide_dreq0", + "ide_dreq1", + "ide_iow", + "ide_ior", + "ide_dack", + "ide_iordy", + "ide_intrq", + "vdin0", + "vdin1", + "vdin2", + "vdin3", + "vdin4", + "vdin5", + "vdin6", + "vdin7", + "vdout0", + "vdout1", + "vdout2", + "vdout3", + "vdout4", + "vdout5", + "nand_cle0", + "nand_cle1", + "vdout6_7", + "vhsync", + "vvsync", + "tsdin0", + "tsdin1", + "tsdin2", + "tsdin3", + "tsdin4", + "tsdin5", + "tsdin6", + "tsdin7", + "tssync", + "tsvalid", + "tsclk", + "lcd_d0", + "lcd_d1", + "lcd_d2", + "lcd_d3", + "lcd_d4", + "lcd_d5", + "lcd_d6", + "lcd_d7", + "lcd_d8", + "lcd_d9", + "lcd_d10", + "lcd_d11", + "lcd_d12", + "lcd_d13", + "lcd_d14", + "lcd_d15", + "lcd_d16", + "lcd_d17", + "lcd_clk", + "lcd_den", + "lcd_line", + "lcd_frm", + "lcd_bias", +}; + +static int vt8500_pinctrl_probe(struct platform_device *pdev) +{ + struct wmt_pinctrl_data *data; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) { + dev_err(&pdev->dev, "failed to allocate data\n"); + return -ENOMEM; + } + + data->banks = vt8500_banks; + data->nbanks = ARRAY_SIZE(vt8500_banks); + data->pins = vt8500_pins; + data->npins = ARRAY_SIZE(vt8500_pins); + data->groups = vt8500_groups; + data->ngroups = ARRAY_SIZE(vt8500_groups); + + return wmt_pinctrl_probe(pdev, data); +} + +static int vt8500_pinctrl_remove(struct platform_device *pdev) +{ + return wmt_pinctrl_remove(pdev); +} + +static struct of_device_id wmt_pinctrl_of_match[] = { + { .compatible = "via,vt8500-pinctrl" }, + { /* sentinel */ }, +}; + +static struct platform_driver wmt_pinctrl_driver = { + .probe = vt8500_pinctrl_probe, + .remove = vt8500_pinctrl_remove, + .driver = { + .name = "pinctrl-vt8500", + .owner = THIS_MODULE, + .of_match_table = wmt_pinctrl_of_match, + }, +}; + +module_platform_driver(wmt_pinctrl_driver); + +MODULE_AUTHOR("Tony Prisk <linux@prisktech.co.nz>"); +MODULE_DESCRIPTION("VIA VT8500 Pincontrol driver"); +MODULE_LICENSE("GPL v2"); +MODULE_DEVICE_TABLE(of, wmt_pinctrl_of_match); diff --git a/drivers/pinctrl/vt8500/pinctrl-wm8505.c b/drivers/pinctrl/vt8500/pinctrl-wm8505.c new file mode 100644 index 0000000..483ba73 --- /dev/null +++ b/drivers/pinctrl/vt8500/pinctrl-wm8505.c @@ -0,0 +1,532 @@ +/* + * Pinctrl data for Wondermedia WM8505 SoC + * + * Copyright (c) 2013 Tony Prisk <linux@prisktech.co.nz> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include <linux/io.h> +#include <linux/module.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +#include "pinctrl-wmt.h" + +/* + * Describe the register offsets within the GPIO memory space + * The dedicated external GPIO's should always be listed in bank 0 + * so they are exported in the 0..31 range which is what users + * expect. + * + * Do not reorder these banks as it will change the pin numbering + */ +static const struct wmt_pinctrl_bank_registers wm8505_banks[] = { + WMT_PINCTRL_BANK(0x64, 0x8C, 0xB4, 0xDC, NO_REG, NO_REG), /* 0 */ + WMT_PINCTRL_BANK(0x40, 0x68, 0x90, 0xB8, NO_REG, NO_REG), /* 1 */ + WMT_PINCTRL_BANK(0x44, 0x6C, 0x94, 0xBC, NO_REG, NO_REG), /* 2 */ + WMT_PINCTRL_BANK(0x48, 0x70, 0x98, 0xC0, NO_REG, NO_REG), /* 3 */ + WMT_PINCTRL_BANK(0x4C, 0x74, 0x9C, 0xC4, NO_REG, NO_REG), /* 4 */ + WMT_PINCTRL_BANK(0x50, 0x78, 0xA0, 0xC8, NO_REG, NO_REG), /* 5 */ + WMT_PINCTRL_BANK(0x54, 0x7C, 0xA4, 0xD0, NO_REG, NO_REG), /* 6 */ + WMT_PINCTRL_BANK(0x58, 0x80, 0xA8, 0xD4, NO_REG, NO_REG), /* 7 */ + WMT_PINCTRL_BANK(0x5C, 0x84, 0xAC, 0xD8, NO_REG, NO_REG), /* 8 */ + WMT_PINCTRL_BANK(0x60, 0x88, 0xB0, 0xDC, NO_REG, NO_REG), /* 9 */ + WMT_PINCTRL_BANK(0x500, 0x504, 0x508, 0x50C, NO_REG, NO_REG), /* 10 */ +}; + +/* Please keep sorted by bank/bit */ +#define WMT_PIN_EXTGPIO0 WMT_PIN(0, 0) +#define WMT_PIN_EXTGPIO1 WMT_PIN(0, 1) +#define WMT_PIN_EXTGPIO2 WMT_PIN(0, 2) +#define WMT_PIN_EXTGPIO3 WMT_PIN(0, 3) +#define WMT_PIN_EXTGPIO4 WMT_PIN(0, 4) +#define WMT_PIN_EXTGPIO5 WMT_PIN(0, 5) +#define WMT_PIN_EXTGPIO6 WMT_PIN(0, 6) +#define WMT_PIN_EXTGPIO7 WMT_PIN(0, 7) +#define WMT_PIN_WAKEUP0 WMT_PIN(0, 16) +#define WMT_PIN_WAKEUP1 WMT_PIN(0, 17) +#define WMT_PIN_WAKEUP2 WMT_PIN(0, 18) +#define WMT_PIN_WAKEUP3 WMT_PIN(0, 19) +#define WMT_PIN_SUSGPIO0 WMT_PIN(0, 21) +#define WMT_PIN_SDDATA0 WMT_PIN(1, 0) +#define WMT_PIN_SDDATA1 WMT_PIN(1, 1) +#define WMT_PIN_SDDATA2 WMT_PIN(1, 2) +#define WMT_PIN_SDDATA3 WMT_PIN(1, 3) +#define WMT_PIN_MMCDATA0 WMT_PIN(1, 4) +#define WMT_PIN_MMCDATA1 WMT_PIN(1, 5) +#define WMT_PIN_MMCDATA2 WMT_PIN(1, 6) +#define WMT_PIN_MMCDATA3 WMT_PIN(1, 7) +#define WMT_PIN_VDIN0 WMT_PIN(2, 0) +#define WMT_PIN_VDIN1 WMT_PIN(2, 1) +#define WMT_PIN_VDIN2 WMT_PIN(2, 2) +#define WMT_PIN_VDIN3 WMT_PIN(2, 3) +#define WMT_PIN_VDIN4 WMT_PIN(2, 4) +#define WMT_PIN_VDIN5 WMT_PIN(2, 5) +#define WMT_PIN_VDIN6 WMT_PIN(2, 6) +#define WMT_PIN_VDIN7 WMT_PIN(2, 7) +#define WMT_PIN_VDOUT0 WMT_PIN(2, 8) +#define WMT_PIN_VDOUT1 WMT_PIN(2, 9) +#define WMT_PIN_VDOUT2 WMT_PIN(2, 10) +#define WMT_PIN_VDOUT3 WMT_PIN(2, 11) +#define WMT_PIN_VDOUT4 WMT_PIN(2, 12) +#define WMT_PIN_VDOUT5 WMT_PIN(2, 13) +#define WMT_PIN_VDOUT6 WMT_PIN(2, 14) +#define WMT_PIN_VDOUT7 WMT_PIN(2, 15) +#define WMT_PIN_VDOUT8 WMT_PIN(2, 16) +#define WMT_PIN_VDOUT9 WMT_PIN(2, 17) +#define WMT_PIN_VDOUT10 WMT_PIN(2, 18) +#define WMT_PIN_VDOUT11 WMT_PIN(2, 19) +#define WMT_PIN_VDOUT12 WMT_PIN(2, 20) +#define WMT_PIN_VDOUT13 WMT_PIN(2, 21) +#define WMT_PIN_VDOUT14 WMT_PIN(2, 22) +#define WMT_PIN_VDOUT15 WMT_PIN(2, 23) +#define WMT_PIN_VDOUT16 WMT_PIN(2, 24) +#define WMT_PIN_VDOUT17 WMT_PIN(2, 25) +#define WMT_PIN_VDOUT18 WMT_PIN(2, 26) +#define WMT_PIN_VDOUT19 WMT_PIN(2, 27) +#define WMT_PIN_VDOUT20 WMT_PIN(2, 28) +#define WMT_PIN_VDOUT21 WMT_PIN(2, 29) +#define WMT_PIN_VDOUT22 WMT_PIN(2, 30) +#define WMT_PIN_VDOUT23 WMT_PIN(2, 31) +#define WMT_PIN_VHSYNC WMT_PIN(3, 0) +#define WMT_PIN_VVSYNC WMT_PIN(3, 1) +#define WMT_PIN_VGAHSYNC WMT_PIN(3, 2) +#define WMT_PIN_VGAVSYNC WMT_PIN(3, 3) +#define WMT_PIN_VDHSYNC WMT_PIN(3, 4) +#define WMT_PIN_VDVSYNC WMT_PIN(3, 5) +#define WMT_PIN_NORD0 WMT_PIN(4, 0) +#define WMT_PIN_NORD1 WMT_PIN(4, 1) +#define WMT_PIN_NORD2 WMT_PIN(4, 2) +#define WMT_PIN_NORD3 WMT_PIN(4, 3) +#define WMT_PIN_NORD4 WMT_PIN(4, 4) +#define WMT_PIN_NORD5 WMT_PIN(4, 5) +#define WMT_PIN_NORD6 WMT_PIN(4, 6) +#define WMT_PIN_NORD7 WMT_PIN(4, 7) +#define WMT_PIN_NORD8 WMT_PIN(4, 8) +#define WMT_PIN_NORD9 WMT_PIN(4, 9) +#define WMT_PIN_NORD10 WMT_PIN(4, 10) +#define WMT_PIN_NORD11 WMT_PIN(4, 11) +#define WMT_PIN_NORD12 WMT_PIN(4, 12) +#define WMT_PIN_NORD13 WMT_PIN(4, 13) +#define WMT_PIN_NORD14 WMT_PIN(4, 14) +#define WMT_PIN_NORD15 WMT_PIN(4, 15) +#define WMT_PIN_NORA0 WMT_PIN(5, 0) +#define WMT_PIN_NORA1 WMT_PIN(5, 1) +#define WMT_PIN_NORA2 WMT_PIN(5, 2) +#define WMT_PIN_NORA3 WMT_PIN(5, 3) +#define WMT_PIN_NORA4 WMT_PIN(5, 4) +#define WMT_PIN_NORA5 WMT_PIN(5, 5) +#define WMT_PIN_NORA6 WMT_PIN(5, 6) +#define WMT_PIN_NORA7 WMT_PIN(5, 7) +#define WMT_PIN_NORA8 WMT_PIN(5, 8) +#define WMT_PIN_NORA9 WMT_PIN(5, 9) +#define WMT_PIN_NORA10 WMT_PIN(5, 10) +#define WMT_PIN_NORA11 WMT_PIN(5, 11) +#define WMT_PIN_NORA12 WMT_PIN(5, 12) +#define WMT_PIN_NORA13 WMT_PIN(5, 13) +#define WMT_PIN_NORA14 WMT_PIN(5, 14) +#define WMT_PIN_NORA15 WMT_PIN(5, 15) +#define WMT_PIN_NORA16 WMT_PIN(5, 16) +#define WMT_PIN_NORA17 WMT_PIN(5, 17) +#define WMT_PIN_NORA18 WMT_PIN(5, 18) +#define WMT_PIN_NORA19 WMT_PIN(5, 19) +#define WMT_PIN_NORA20 WMT_PIN(5, 20) +#define WMT_PIN_NORA21 WMT_PIN(5, 21) +#define WMT_PIN_NORA22 WMT_PIN(5, 22) +#define WMT_PIN_NORA23 WMT_PIN(5, 23) +#define WMT_PIN_NORA24 WMT_PIN(5, 24) +#define WMT_PIN_AC97SDI WMT_PIN(6, 0) +#define WMT_PIN_AC97SYNC WMT_PIN(6, 1) +#define WMT_PIN_AC97SDO WMT_PIN(6, 2) +#define WMT_PIN_AC97BCLK WMT_PIN(6, 3) +#define WMT_PIN_AC97RST WMT_PIN(6, 4) +#define WMT_PIN_SFDO WMT_PIN(7, 0) +#define WMT_PIN_SFCS0 WMT_PIN(7, 1) +#define WMT_PIN_SFCS1 WMT_PIN(7, 2) +#define WMT_PIN_SFCLK WMT_PIN(7, 3) +#define WMT_PIN_SFDI WMT_PIN(7, 4) +#define WMT_PIN_SPI0CLK WMT_PIN(8, 0) +#define WMT_PIN_SPI0MISO WMT_PIN(8, 1) +#define WMT_PIN_SPI0MOSI WMT_PIN(8, 2) +#define WMT_PIN_SPI0SS WMT_PIN(8, 3) +#define WMT_PIN_SPI1CLK WMT_PIN(8, 4) +#define WMT_PIN_SPI1MISO WMT_PIN(8, 5) +#define WMT_PIN_SPI1MOSI WMT_PIN(8, 6) +#define WMT_PIN_SPI1SS WMT_PIN(8, 7) +#define WMT_PIN_SPI2CLK WMT_PIN(8, 8) +#define WMT_PIN_SPI2MISO WMT_PIN(8, 9) +#define WMT_PIN_SPI2MOSI WMT_PIN(8, 10) +#define WMT_PIN_SPI2SS WMT_PIN(8, 11) +#define WMT_PIN_UART0_RTS WMT_PIN(9, 0) +#define WMT_PIN_UART0_TXD WMT_PIN(9, 1) +#define WMT_PIN_UART0_CTS WMT_PIN(9, 2) +#define WMT_PIN_UART0_RXD WMT_PIN(9, 3) +#define WMT_PIN_UART1_RTS WMT_PIN(9, 4) +#define WMT_PIN_UART1_TXD WMT_PIN(9, 5) +#define WMT_PIN_UART1_CTS WMT_PIN(9, 6) +#define WMT_PIN_UART1_RXD WMT_PIN(9, 7) +#define WMT_PIN_UART2_RTS WMT_PIN(9, 8) +#define WMT_PIN_UART2_TXD WMT_PIN(9, 9) +#define WMT_PIN_UART2_CTS WMT_PIN(9, 10) +#define WMT_PIN_UART2_RXD WMT_PIN(9, 11) +#define WMT_PIN_UART3_RTS WMT_PIN(9, 12) +#define WMT_PIN_UART3_TXD WMT_PIN(9, 13) +#define WMT_PIN_UART3_CTS WMT_PIN(9, 14) +#define WMT_PIN_UART3_RXD WMT_PIN(9, 15) +#define WMT_PIN_I2C0SCL WMT_PIN(10, 0) +#define WMT_PIN_I2C0SDA WMT_PIN(10, 1) +#define WMT_PIN_I2C1SCL WMT_PIN(10, 2) +#define WMT_PIN_I2C1SDA WMT_PIN(10, 3) +#define WMT_PIN_I2C2SCL WMT_PIN(10, 4) +#define WMT_PIN_I2C2SDA WMT_PIN(10, 5) + +static const struct pinctrl_pin_desc wm8505_pins[] = { + PINCTRL_PIN(WMT_PIN_EXTGPIO0, "extgpio0"), + PINCTRL_PIN(WMT_PIN_EXTGPIO1, "extgpio1"), + PINCTRL_PIN(WMT_PIN_EXTGPIO2, "extgpio2"), + PINCTRL_PIN(WMT_PIN_EXTGPIO3, "extgpio3"), + PINCTRL_PIN(WMT_PIN_EXTGPIO4, "extgpio4"), + PINCTRL_PIN(WMT_PIN_EXTGPIO5, "extgpio5"), + PINCTRL_PIN(WMT_PIN_EXTGPIO6, "extgpio6"), + PINCTRL_PIN(WMT_PIN_EXTGPIO7, "extgpio7"), + PINCTRL_PIN(WMT_PIN_WAKEUP0, "wakeup0"), + PINCTRL_PIN(WMT_PIN_WAKEUP1, "wakeup1"), + PINCTRL_PIN(WMT_PIN_WAKEUP2, "wakeup2"), + PINCTRL_PIN(WMT_PIN_WAKEUP3, "wakeup3"), + PINCTRL_PIN(WMT_PIN_SUSGPIO0, "susgpio0"), + PINCTRL_PIN(WMT_PIN_SDDATA0, "sd_data0"), + PINCTRL_PIN(WMT_PIN_SDDATA1, "sd_data1"), + PINCTRL_PIN(WMT_PIN_SDDATA2, "sd_data2"), + PINCTRL_PIN(WMT_PIN_SDDATA3, "sd_data3"), + PINCTRL_PIN(WMT_PIN_MMCDATA0, "mmc_data0"), + PINCTRL_PIN(WMT_PIN_MMCDATA1, "mmc_data1"), + PINCTRL_PIN(WMT_PIN_MMCDATA2, "mmc_data2"), + PINCTRL_PIN(WMT_PIN_MMCDATA3, "mmc_data3"), + PINCTRL_PIN(WMT_PIN_VDIN0, "vdin0"), + PINCTRL_PIN(WMT_PIN_VDIN1, "vdin1"), + PINCTRL_PIN(WMT_PIN_VDIN2, "vdin2"), + PINCTRL_PIN(WMT_PIN_VDIN3, "vdin3"), + PINCTRL_PIN(WMT_PIN_VDIN4, "vdin4"), + PINCTRL_PIN(WMT_PIN_VDIN5, "vdin5"), + PINCTRL_PIN(WMT_PIN_VDIN6, "vdin6"), + PINCTRL_PIN(WMT_PIN_VDIN7, "vdin7"), + PINCTRL_PIN(WMT_PIN_VDOUT0, "vdout0"), + PINCTRL_PIN(WMT_PIN_VDOUT1, "vdout1"), + PINCTRL_PIN(WMT_PIN_VDOUT2, "vdout2"), + PINCTRL_PIN(WMT_PIN_VDOUT3, "vdout3"), + PINCTRL_PIN(WMT_PIN_VDOUT4, "vdout4"), + PINCTRL_PIN(WMT_PIN_VDOUT5, "vdout5"), + PINCTRL_PIN(WMT_PIN_VDOUT6, "vdout6"), + PINCTRL_PIN(WMT_PIN_VDOUT7, "vdout7"), + PINCTRL_PIN(WMT_PIN_VDOUT8, "vdout8"), + PINCTRL_PIN(WMT_PIN_VDOUT9, "vdout9"), + PINCTRL_PIN(WMT_PIN_VDOUT10, "vdout10"), + PINCTRL_PIN(WMT_PIN_VDOUT11, "vdout11"), + PINCTRL_PIN(WMT_PIN_VDOUT12, "vdout12"), + PINCTRL_PIN(WMT_PIN_VDOUT13, "vdout13"), + PINCTRL_PIN(WMT_PIN_VDOUT14, "vdout14"), + PINCTRL_PIN(WMT_PIN_VDOUT15, "vdout15"), + PINCTRL_PIN(WMT_PIN_VDOUT16, "vdout16"), + PINCTRL_PIN(WMT_PIN_VDOUT17, "vdout17"), + PINCTRL_PIN(WMT_PIN_VDOUT18, "vdout18"), + PINCTRL_PIN(WMT_PIN_VDOUT19, "vdout19"), + PINCTRL_PIN(WMT_PIN_VDOUT20, "vdout20"), + PINCTRL_PIN(WMT_PIN_VDOUT21, "vdout21"), + PINCTRL_PIN(WMT_PIN_VDOUT22, "vdout22"), + PINCTRL_PIN(WMT_PIN_VDOUT23, "vdout23"), + PINCTRL_PIN(WMT_PIN_VHSYNC, "v_hsync"), + PINCTRL_PIN(WMT_PIN_VVSYNC, "v_vsync"), + PINCTRL_PIN(WMT_PIN_VGAHSYNC, "vga_hsync"), + PINCTRL_PIN(WMT_PIN_VGAVSYNC, "vga_vsync"), + PINCTRL_PIN(WMT_PIN_VDHSYNC, "vd_hsync"), + PINCTRL_PIN(WMT_PIN_VDVSYNC, "vd_vsync"), + PINCTRL_PIN(WMT_PIN_NORD0, "nor_d0"), + PINCTRL_PIN(WMT_PIN_NORD1, "nor_d1"), + PINCTRL_PIN(WMT_PIN_NORD2, "nor_d2"), + PINCTRL_PIN(WMT_PIN_NORD3, "nor_d3"), + PINCTRL_PIN(WMT_PIN_NORD4, "nor_d4"), + PINCTRL_PIN(WMT_PIN_NORD5, "nor_d5"), + PINCTRL_PIN(WMT_PIN_NORD6, "nor_d6"), + PINCTRL_PIN(WMT_PIN_NORD7, "nor_d7"), + PINCTRL_PIN(WMT_PIN_NORD8, "nor_d8"), + PINCTRL_PIN(WMT_PIN_NORD9, "nor_d9"), + PINCTRL_PIN(WMT_PIN_NORD10, "nor_d10"), + PINCTRL_PIN(WMT_PIN_NORD11, "nor_d11"), + PINCTRL_PIN(WMT_PIN_NORD12, "nor_d12"), + PINCTRL_PIN(WMT_PIN_NORD13, "nor_d13"), + PINCTRL_PIN(WMT_PIN_NORD14, "nor_d14"), + PINCTRL_PIN(WMT_PIN_NORD15, "nor_d15"), + PINCTRL_PIN(WMT_PIN_NORA0, "nor_a0"), + PINCTRL_PIN(WMT_PIN_NORA1, "nor_a1"), + PINCTRL_PIN(WMT_PIN_NORA2, "nor_a2"), + PINCTRL_PIN(WMT_PIN_NORA3, "nor_a3"), + PINCTRL_PIN(WMT_PIN_NORA4, "nor_a4"), + PINCTRL_PIN(WMT_PIN_NORA5, "nor_a5"), + PINCTRL_PIN(WMT_PIN_NORA6, "nor_a6"), + PINCTRL_PIN(WMT_PIN_NORA7, "nor_a7"), + PINCTRL_PIN(WMT_PIN_NORA8, "nor_a8"), + PINCTRL_PIN(WMT_PIN_NORA9, "nor_a9"), + PINCTRL_PIN(WMT_PIN_NORA10, "nor_a10"), + PINCTRL_PIN(WMT_PIN_NORA11, "nor_a11"), + PINCTRL_PIN(WMT_PIN_NORA12, "nor_a12"), + PINCTRL_PIN(WMT_PIN_NORA13, "nor_a13"), + PINCTRL_PIN(WMT_PIN_NORA14, "nor_a14"), + PINCTRL_PIN(WMT_PIN_NORA15, "nor_a15"), + PINCTRL_PIN(WMT_PIN_NORA16, "nor_a16"), + PINCTRL_PIN(WMT_PIN_NORA17, "nor_a17"), + PINCTRL_PIN(WMT_PIN_NORA18, "nor_a18"), + PINCTRL_PIN(WMT_PIN_NORA19, "nor_a19"), + PINCTRL_PIN(WMT_PIN_NORA20, "nor_a20"), + PINCTRL_PIN(WMT_PIN_NORA21, "nor_a21"), + PINCTRL_PIN(WMT_PIN_NORA22, "nor_a22"), + PINCTRL_PIN(WMT_PIN_NORA23, "nor_a23"), + PINCTRL_PIN(WMT_PIN_NORA24, "nor_a24"), + PINCTRL_PIN(WMT_PIN_AC97SDI, "ac97_sdi"), + PINCTRL_PIN(WMT_PIN_AC97SYNC, "ac97_sync"), + PINCTRL_PIN(WMT_PIN_AC97SDO, "ac97_sdo"), + PINCTRL_PIN(WMT_PIN_AC97BCLK, "ac97_bclk"), + PINCTRL_PIN(WMT_PIN_AC97RST, "ac97_rst"), + PINCTRL_PIN(WMT_PIN_SFDO, "sf_do"), + PINCTRL_PIN(WMT_PIN_SFCS0, "sf_cs0"), + PINCTRL_PIN(WMT_PIN_SFCS1, "sf_cs1"), + PINCTRL_PIN(WMT_PIN_SFCLK, "sf_clk"), + PINCTRL_PIN(WMT_PIN_SFDI, "sf_di"), + PINCTRL_PIN(WMT_PIN_SPI0CLK, "spi0_clk"), + PINCTRL_PIN(WMT_PIN_SPI0MISO, "spi0_miso"), + PINCTRL_PIN(WMT_PIN_SPI0MOSI, "spi0_mosi"), + PINCTRL_PIN(WMT_PIN_SPI0SS, "spi0_ss"), + PINCTRL_PIN(WMT_PIN_SPI1CLK, "spi1_clk"), + PINCTRL_PIN(WMT_PIN_SPI1MISO, "spi1_miso"), + PINCTRL_PIN(WMT_PIN_SPI1MOSI, "spi1_mosi"), + PINCTRL_PIN(WMT_PIN_SPI1SS, "spi1_ss"), + PINCTRL_PIN(WMT_PIN_SPI2CLK, "spi2_clk"), + PINCTRL_PIN(WMT_PIN_SPI2MISO, "spi2_miso"), + PINCTRL_PIN(WMT_PIN_SPI2MOSI, "spi2_mosi"), + PINCTRL_PIN(WMT_PIN_SPI2SS, "spi2_ss"), + PINCTRL_PIN(WMT_PIN_UART0_RTS, "uart0_rts"), + PINCTRL_PIN(WMT_PIN_UART0_TXD, "uart0_txd"), + PINCTRL_PIN(WMT_PIN_UART0_CTS, "uart0_cts"), + PINCTRL_PIN(WMT_PIN_UART0_RXD, "uart0_rxd"), + PINCTRL_PIN(WMT_PIN_UART1_RTS, "uart1_rts"), + PINCTRL_PIN(WMT_PIN_UART1_TXD, "uart1_txd"), + PINCTRL_PIN(WMT_PIN_UART1_CTS, "uart1_cts"), + PINCTRL_PIN(WMT_PIN_UART1_RXD, "uart1_rxd"), + PINCTRL_PIN(WMT_PIN_UART2_RTS, "uart2_rts"), + PINCTRL_PIN(WMT_PIN_UART2_TXD, "uart2_txd"), + PINCTRL_PIN(WMT_PIN_UART2_CTS, "uart2_cts"), + PINCTRL_PIN(WMT_PIN_UART2_RXD, "uart2_rxd"), + PINCTRL_PIN(WMT_PIN_UART3_RTS, "uart3_rts"), + PINCTRL_PIN(WMT_PIN_UART3_TXD, "uart3_txd"), + PINCTRL_PIN(WMT_PIN_UART3_CTS, "uart3_cts"), + PINCTRL_PIN(WMT_PIN_UART3_RXD, "uart3_rxd"), + PINCTRL_PIN(WMT_PIN_I2C0SCL, "i2c0_scl"), + PINCTRL_PIN(WMT_PIN_I2C0SDA, "i2c0_sda"), + PINCTRL_PIN(WMT_PIN_I2C1SCL, "i2c1_scl"), + PINCTRL_PIN(WMT_PIN_I2C1SDA, "i2c1_sda"), + PINCTRL_PIN(WMT_PIN_I2C2SCL, "i2c2_scl"), + PINCTRL_PIN(WMT_PIN_I2C2SDA, "i2c2_sda"), +}; + +/* Order of these names must match the above list */ +static const char * const wm8505_groups[] = { + "extgpio0", + "extgpio1", + "extgpio2", + "extgpio3", + "extgpio4", + "extgpio5", + "extgpio6", + "extgpio7", + "wakeup0", + "wakeup1", + "wakeup2", + "wakeup3", + "susgpio0", + "sd_data0", + "sd_data1", + "sd_data2", + "sd_data3", + "mmc_data0", + "mmc_data1", + "mmc_data2", + "mmc_data3", + "vdin0", + "vdin1", + "vdin2", + "vdin3", + "vdin4", + "vdin5", + "vdin6", + "vdin7", + "vdout0", + "vdout1", + "vdout2", + "vdout3", + "vdout4", + "vdout5", + "vdout6", + "vdout7", + "vdout8", + "vdout9", + "vdout10", + "vdout11", + "vdout12", + "vdout13", + "vdout14", + "vdout15", + "vdout16", + "vdout17", + "vdout18", + "vdout19", + "vdout20", + "vdout21", + "vdout22", + "vdout23", + "v_hsync", + "v_vsync", + "vga_hsync", + "vga_vsync", + "vd_hsync", + "vd_vsync", + "nor_d0", + "nor_d1", + "nor_d2", + "nor_d3", + "nor_d4", + "nor_d5", + "nor_d6", + "nor_d7", + "nor_d8", + "nor_d9", + "nor_d10", + "nor_d11", + "nor_d12", + "nor_d13", + "nor_d14", + "nor_d15", + "nor_a0", + "nor_a1", + "nor_a2", + "nor_a3", + "nor_a4", + "nor_a5", + "nor_a6", + "nor_a7", + "nor_a8", + "nor_a9", + "nor_a10", + "nor_a11", + "nor_a12", + "nor_a13", + "nor_a14", + "nor_a15", + "nor_a16", + "nor_a17", + "nor_a18", + "nor_a19", + "nor_a20", + "nor_a21", + "nor_a22", + "nor_a23", + "nor_a24", + "ac97_sdi", + "ac97_sync", + "ac97_sdo", + "ac97_bclk", + "ac97_rst", + "sf_do", + "sf_cs0", + "sf_cs1", + "sf_clk", + "sf_di", + "spi0_clk", + "spi0_miso", + "spi0_mosi", + "spi0_ss", + "spi1_clk", + "spi1_miso", + "spi1_mosi", + "spi1_ss", + "spi2_clk", + "spi2_miso", + "spi2_mosi", + "spi2_ss", + "uart0_rts", + "uart0_txd", + "uart0_cts", + "uart0_rxd", + "uart1_rts", + "uart1_txd", + "uart1_cts", + "uart1_rxd", + "uart2_rts", + "uart2_txd", + "uart2_cts", + "uart2_rxd", + "uart3_rts", + "uart3_txd", + "uart3_cts", + "uart3_rxd", + "i2c0_scl", + "i2c0_sda", + "i2c1_scl", + "i2c1_sda", + "i2c2_scl", + "i2c2_sda", +}; + +static int wm8505_pinctrl_probe(struct platform_device *pdev) +{ + struct wmt_pinctrl_data *data; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) { + dev_err(&pdev->dev, "failed to allocate data\n"); + return -ENOMEM; + } + + data->banks = wm8505_banks; + data->nbanks = ARRAY_SIZE(wm8505_banks); + data->pins = wm8505_pins; + data->npins = ARRAY_SIZE(wm8505_pins); + data->groups = wm8505_groups; + data->ngroups = ARRAY_SIZE(wm8505_groups); + + return wmt_pinctrl_probe(pdev, data); +} + +static int wm8505_pinctrl_remove(struct platform_device *pdev) +{ + return wmt_pinctrl_remove(pdev); +} + +static struct of_device_id wmt_pinctrl_of_match[] = { + { .compatible = "wm,wm8505-pinctrl" }, + { /* sentinel */ }, +}; + +static struct platform_driver wmt_pinctrl_driver = { + .probe = wm8505_pinctrl_probe, + .remove = wm8505_pinctrl_remove, + .driver = { + .name = "pinctrl-wm8505", + .owner = THIS_MODULE, + .of_match_table = wmt_pinctrl_of_match, + }, +}; + +module_platform_driver(wmt_pinctrl_driver); + +MODULE_AUTHOR("Tony Prisk <linux@prisktech.co.nz>"); +MODULE_DESCRIPTION("Wondermedia WM8505 Pincontrol driver"); +MODULE_LICENSE("GPL v2"); +MODULE_DEVICE_TABLE(of, wmt_pinctrl_of_match); diff --git a/drivers/pinctrl/vt8500/pinctrl-wm8650.c b/drivers/pinctrl/vt8500/pinctrl-wm8650.c new file mode 100644 index 0000000..7de57f0 --- /dev/null +++ b/drivers/pinctrl/vt8500/pinctrl-wm8650.c @@ -0,0 +1,370 @@ +/* + * Pinctrl data for Wondermedia WM8650 SoC + * + * Copyright (c) 2013 Tony Prisk <linux@prisktech.co.nz> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include <linux/io.h> +#include <linux/module.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +#include "pinctrl-wmt.h" + +/* + * Describe the register offsets within the GPIO memory space + * The dedicated external GPIO's should always be listed in bank 0 + * so they are exported in the 0..31 range which is what users + * expect. + * + * Do not reorder these banks as it will change the pin numbering + */ +static const struct wmt_pinctrl_bank_registers wm8650_banks[] = { + WMT_PINCTRL_BANK(0x40, 0x80, 0xC0, 0x00, 0x480, 0x4C0), /* 0 */ + WMT_PINCTRL_BANK(0x44, 0x84, 0xC4, 0x04, 0x484, 0x4C4), /* 1 */ + WMT_PINCTRL_BANK(0x48, 0x88, 0xC8, 0x08, 0x488, 0x4C8), /* 2 */ + WMT_PINCTRL_BANK(0x4C, 0x8C, 0xCC, 0x0C, 0x48C, 0x4CC), /* 3 */ + WMT_PINCTRL_BANK(0x50, 0x90, 0xD0, 0x10, 0x490, 0x4D0), /* 4 */ + WMT_PINCTRL_BANK(0x54, 0x94, 0xD4, 0x14, 0x494, 0x4D4), /* 5 */ + WMT_PINCTRL_BANK(0x58, 0x98, 0xD8, 0x18, 0x498, 0x4D8), /* 6 */ + WMT_PINCTRL_BANK(0x5C, 0x9C, 0xDC, 0x1C, 0x49C, 0x4DC), /* 7 */ +}; + +/* Please keep sorted by bank/bit */ +#define WMT_PIN_EXTGPIO0 WMT_PIN(0, 0) +#define WMT_PIN_EXTGPIO1 WMT_PIN(0, 1) +#define WMT_PIN_EXTGPIO2 WMT_PIN(0, 2) +#define WMT_PIN_EXTGPIO3 WMT_PIN(0, 3) +#define WMT_PIN_EXTGPIO4 WMT_PIN(0, 4) +#define WMT_PIN_EXTGPIO5 WMT_PIN(0, 5) +#define WMT_PIN_EXTGPIO6 WMT_PIN(0, 6) +#define WMT_PIN_EXTGPIO7 WMT_PIN(0, 7) +#define WMT_PIN_WAKEUP0 WMT_PIN(0, 16) +#define WMT_PIN_WAKEUP1 WMT_PIN(0, 17) +#define WMT_PIN_SUSGPIO0 WMT_PIN(0, 21) +#define WMT_PIN_SD0CD WMT_PIN(0, 28) +#define WMT_PIN_SD1CD WMT_PIN(0, 29) +#define WMT_PIN_VDOUT0 WMT_PIN(1, 0) +#define WMT_PIN_VDOUT1 WMT_PIN(1, 1) +#define WMT_PIN_VDOUT2 WMT_PIN(1, 2) +#define WMT_PIN_VDOUT3 WMT_PIN(1, 3) +#define WMT_PIN_VDOUT4 WMT_PIN(1, 4) +#define WMT_PIN_VDOUT5 WMT_PIN(1, 5) +#define WMT_PIN_VDOUT6 WMT_PIN(1, 6) +#define WMT_PIN_VDOUT7 WMT_PIN(1, 7) +#define WMT_PIN_VDOUT8 WMT_PIN(1, 8) +#define WMT_PIN_VDOUT9 WMT_PIN(1, 9) +#define WMT_PIN_VDOUT10 WMT_PIN(1, 10) +#define WMT_PIN_VDOUT11 WMT_PIN(1, 11) +#define WMT_PIN_VDOUT12 WMT_PIN(1, 12) +#define WMT_PIN_VDOUT13 WMT_PIN(1, 13) +#define WMT_PIN_VDOUT14 WMT_PIN(1, 14) +#define WMT_PIN_VDOUT15 WMT_PIN(1, 15) +#define WMT_PIN_VDOUT16 WMT_PIN(1, 16) +#define WMT_PIN_VDOUT17 WMT_PIN(1, 17) +#define WMT_PIN_VDOUT18 WMT_PIN(1, 18) +#define WMT_PIN_VDOUT19 WMT_PIN(1, 19) +#define WMT_PIN_VDOUT20 WMT_PIN(1, 20) +#define WMT_PIN_VDOUT21 WMT_PIN(1, 21) +#define WMT_PIN_VDOUT22 WMT_PIN(1, 22) +#define WMT_PIN_VDOUT23 WMT_PIN(1, 23) +#define WMT_PIN_VDIN0 WMT_PIN(2, 0) +#define WMT_PIN_VDIN1 WMT_PIN(2, 1) +#define WMT_PIN_VDIN2 WMT_PIN(2, 2) +#define WMT_PIN_VDIN3 WMT_PIN(2, 3) +#define WMT_PIN_VDIN4 WMT_PIN(2, 4) +#define WMT_PIN_VDIN5 WMT_PIN(2, 5) +#define WMT_PIN_VDIN6 WMT_PIN(2, 6) +#define WMT_PIN_VDIN7 WMT_PIN(2, 7) +#define WMT_PIN_I2C1SCL WMT_PIN(2, 12) +#define WMT_PIN_I2C1SDA WMT_PIN(2, 13) +#define WMT_PIN_SPI0MOSI WMT_PIN(2, 24) +#define WMT_PIN_SPI0MISO WMT_PIN(2, 25) +#define WMT_PIN_SPI0SS0 WMT_PIN(2, 26) +#define WMT_PIN_SPI0CLK WMT_PIN(2, 27) +#define WMT_PIN_SD0DATA0 WMT_PIN(3, 8) +#define WMT_PIN_SD0DATA1 WMT_PIN(3, 9) +#define WMT_PIN_SD0DATA2 WMT_PIN(3, 10) +#define WMT_PIN_SD0DATA3 WMT_PIN(3, 11) +#define WMT_PIN_SD0CLK WMT_PIN(3, 12) +#define WMT_PIN_SD0WP WMT_PIN(3, 13) +#define WMT_PIN_SD0CMD WMT_PIN(3, 14) +#define WMT_PIN_SD1DATA0 WMT_PIN(3, 24) +#define WMT_PIN_SD1DATA1 WMT_PIN(3, 25) +#define WMT_PIN_SD1DATA2 WMT_PIN(3, 26) +#define WMT_PIN_SD1DATA3 WMT_PIN(3, 27) +#define WMT_PIN_SD1DATA4 WMT_PIN(3, 28) +#define WMT_PIN_SD1DATA5 WMT_PIN(3, 29) +#define WMT_PIN_SD1DATA6 WMT_PIN(3, 30) +#define WMT_PIN_SD1DATA7 WMT_PIN(3, 31) +#define WMT_PIN_I2C0SCL WMT_PIN(5, 8) +#define WMT_PIN_I2C0SDA WMT_PIN(5, 9) +#define WMT_PIN_UART0RTS WMT_PIN(5, 16) +#define WMT_PIN_UART0TXD WMT_PIN(5, 17) +#define WMT_PIN_UART0CTS WMT_PIN(5, 18) +#define WMT_PIN_UART0RXD WMT_PIN(5, 19) +#define WMT_PIN_UART1RTS WMT_PIN(5, 20) +#define WMT_PIN_UART1TXD WMT_PIN(5, 21) +#define WMT_PIN_UART1CTS WMT_PIN(5, 22) +#define WMT_PIN_UART1RXD WMT_PIN(5, 23) +#define WMT_PIN_UART2RTS WMT_PIN(5, 24) +#define WMT_PIN_UART2TXD WMT_PIN(5, 25) +#define WMT_PIN_UART2CTS WMT_PIN(5, 26) +#define WMT_PIN_UART2RXD WMT_PIN(5, 27) +#define WMT_PIN_UART3RTS WMT_PIN(5, 28) +#define WMT_PIN_UART3TXD WMT_PIN(5, 29) +#define WMT_PIN_UART3CTS WMT_PIN(5, 30) +#define WMT_PIN_UART3RXD WMT_PIN(5, 31) +#define WMT_PIN_KPADROW0 WMT_PIN(6, 16) +#define WMT_PIN_KPADROW1 WMT_PIN(6, 17) +#define WMT_PIN_KPADCOL0 WMT_PIN(6, 18) +#define WMT_PIN_KPADCOL1 WMT_PIN(6, 19) +#define WMT_PIN_SD1CLK WMT_PIN(7, 0) +#define WMT_PIN_SD1CMD WMT_PIN(7, 1) +#define WMT_PIN_SD1WP WMT_PIN(7, 13) + +static const struct pinctrl_pin_desc wm8650_pins[] = { + PINCTRL_PIN(WMT_PIN_EXTGPIO0, "extgpio0"), + PINCTRL_PIN(WMT_PIN_EXTGPIO1, "extgpio1"), + PINCTRL_PIN(WMT_PIN_EXTGPIO2, "extgpio2"), + PINCTRL_PIN(WMT_PIN_EXTGPIO3, "extgpio3"), + PINCTRL_PIN(WMT_PIN_EXTGPIO4, "extgpio4"), + PINCTRL_PIN(WMT_PIN_EXTGPIO5, "extgpio5"), + PINCTRL_PIN(WMT_PIN_EXTGPIO6, "extgpio6"), + PINCTRL_PIN(WMT_PIN_EXTGPIO7, "extgpio7"), + PINCTRL_PIN(WMT_PIN_WAKEUP0, "wakeup0"), + PINCTRL_PIN(WMT_PIN_WAKEUP1, "wakeup1"), + PINCTRL_PIN(WMT_PIN_SUSGPIO0, "susgpio0"), + PINCTRL_PIN(WMT_PIN_SD0CD, "sd0_cd"), + PINCTRL_PIN(WMT_PIN_SD1CD, "sd1_cd"), + PINCTRL_PIN(WMT_PIN_VDOUT0, "vdout0"), + PINCTRL_PIN(WMT_PIN_VDOUT1, "vdout1"), + PINCTRL_PIN(WMT_PIN_VDOUT2, "vdout2"), + PINCTRL_PIN(WMT_PIN_VDOUT3, "vdout3"), + PINCTRL_PIN(WMT_PIN_VDOUT4, "vdout4"), + PINCTRL_PIN(WMT_PIN_VDOUT5, "vdout5"), + PINCTRL_PIN(WMT_PIN_VDOUT6, "vdout6"), + PINCTRL_PIN(WMT_PIN_VDOUT7, "vdout7"), + PINCTRL_PIN(WMT_PIN_VDOUT8, "vdout8"), + PINCTRL_PIN(WMT_PIN_VDOUT9, "vdout9"), + PINCTRL_PIN(WMT_PIN_VDOUT10, "vdout10"), + PINCTRL_PIN(WMT_PIN_VDOUT11, "vdout11"), + PINCTRL_PIN(WMT_PIN_VDOUT12, "vdout12"), + PINCTRL_PIN(WMT_PIN_VDOUT13, "vdout13"), + PINCTRL_PIN(WMT_PIN_VDOUT14, "vdout14"), + PINCTRL_PIN(WMT_PIN_VDOUT15, "vdout15"), + PINCTRL_PIN(WMT_PIN_VDOUT16, "vdout16"), + PINCTRL_PIN(WMT_PIN_VDOUT17, "vdout17"), + PINCTRL_PIN(WMT_PIN_VDOUT18, "vdout18"), + PINCTRL_PIN(WMT_PIN_VDOUT19, "vdout19"), + PINCTRL_PIN(WMT_PIN_VDOUT20, "vdout20"), + PINCTRL_PIN(WMT_PIN_VDOUT21, "vdout21"), + PINCTRL_PIN(WMT_PIN_VDOUT22, "vdout22"), + PINCTRL_PIN(WMT_PIN_VDOUT23, "vdout23"), + PINCTRL_PIN(WMT_PIN_VDIN0, "vdin0"), + PINCTRL_PIN(WMT_PIN_VDIN1, "vdin1"), + PINCTRL_PIN(WMT_PIN_VDIN2, "vdin2"), + PINCTRL_PIN(WMT_PIN_VDIN3, "vdin3"), + PINCTRL_PIN(WMT_PIN_VDIN4, "vdin4"), + PINCTRL_PIN(WMT_PIN_VDIN5, "vdin5"), + PINCTRL_PIN(WMT_PIN_VDIN6, "vdin6"), + PINCTRL_PIN(WMT_PIN_VDIN7, "vdin7"), + PINCTRL_PIN(WMT_PIN_I2C1SCL, "i2c1_scl"), + PINCTRL_PIN(WMT_PIN_I2C1SDA, "i2c1_sda"), + PINCTRL_PIN(WMT_PIN_SPI0MOSI, "spi0_mosi"), + PINCTRL_PIN(WMT_PIN_SPI0MISO, "spi0_miso"), + PINCTRL_PIN(WMT_PIN_SPI0SS0, "spi0_ss0"), + PINCTRL_PIN(WMT_PIN_SPI0CLK, "spi0_clk"), + PINCTRL_PIN(WMT_PIN_SD0DATA0, "sd0_data0"), + PINCTRL_PIN(WMT_PIN_SD0DATA1, "sd0_data1"), + PINCTRL_PIN(WMT_PIN_SD0DATA2, "sd0_data2"), + PINCTRL_PIN(WMT_PIN_SD0DATA3, "sd0_data3"), + PINCTRL_PIN(WMT_PIN_SD0CLK, "sd0_clk"), + PINCTRL_PIN(WMT_PIN_SD0WP, "sd0_wp"), + PINCTRL_PIN(WMT_PIN_SD0CMD, "sd0_cmd"), + PINCTRL_PIN(WMT_PIN_SD1DATA0, "sd1_data0"), + PINCTRL_PIN(WMT_PIN_SD1DATA1, "sd1_data1"), + PINCTRL_PIN(WMT_PIN_SD1DATA2, "sd1_data2"), + PINCTRL_PIN(WMT_PIN_SD1DATA3, "sd1_data3"), + PINCTRL_PIN(WMT_PIN_SD1DATA4, "sd1_data4"), + PINCTRL_PIN(WMT_PIN_SD1DATA5, "sd1_data5"), + PINCTRL_PIN(WMT_PIN_SD1DATA6, "sd1_data6"), + PINCTRL_PIN(WMT_PIN_SD1DATA7, "sd1_data7"), + PINCTRL_PIN(WMT_PIN_I2C0SCL, "i2c0_scl"), + PINCTRL_PIN(WMT_PIN_I2C0SDA, "i2c0_sda"), + PINCTRL_PIN(WMT_PIN_UART0RTS, "uart0_rts"), + PINCTRL_PIN(WMT_PIN_UART0TXD, "uart0_txd"), + PINCTRL_PIN(WMT_PIN_UART0CTS, "uart0_cts"), + PINCTRL_PIN(WMT_PIN_UART0RXD, "uart0_rxd"), + PINCTRL_PIN(WMT_PIN_UART1RTS, "uart1_rts"), + PINCTRL_PIN(WMT_PIN_UART1TXD, "uart1_txd"), + PINCTRL_PIN(WMT_PIN_UART1CTS, "uart1_cts"), + PINCTRL_PIN(WMT_PIN_UART1RXD, "uart1_rxd"), + PINCTRL_PIN(WMT_PIN_UART2RTS, "uart2_rts"), + PINCTRL_PIN(WMT_PIN_UART2TXD, "uart2_txd"), + PINCTRL_PIN(WMT_PIN_UART2CTS, "uart2_cts"), + PINCTRL_PIN(WMT_PIN_UART2RXD, "uart2_rxd"), + PINCTRL_PIN(WMT_PIN_UART3RTS, "uart3_rts"), + PINCTRL_PIN(WMT_PIN_UART3TXD, "uart3_txd"), + PINCTRL_PIN(WMT_PIN_UART3CTS, "uart3_cts"), + PINCTRL_PIN(WMT_PIN_UART3RXD, "uart3_rxd"), + PINCTRL_PIN(WMT_PIN_KPADROW0, "kpadrow0"), + PINCTRL_PIN(WMT_PIN_KPADROW1, "kpadrow1"), + PINCTRL_PIN(WMT_PIN_KPADCOL0, "kpadcol0"), + PINCTRL_PIN(WMT_PIN_KPADCOL1, "kpadcol1"), + PINCTRL_PIN(WMT_PIN_SD1CLK, "sd1_clk"), + PINCTRL_PIN(WMT_PIN_SD1CMD, "sd1_cmd"), + PINCTRL_PIN(WMT_PIN_SD1WP, "sd1_wp"), +}; + +/* Order of these names must match the above list */ +static const char * const wm8650_groups[] = { + "extgpio0", + "extgpio1", + "extgpio2", + "extgpio3", + "extgpio4", + "extgpio5", + "extgpio6", + "extgpio7", + "wakeup0", + "wakeup1", + "susgpio0", + "sd0_cd", + "sd1_cd", + "vdout0", + "vdout1", + "vdout2", + "vdout3", + "vdout4", + "vdout5", + "vdout6", + "vdout7", + "vdout8", + "vdout9", + "vdout10", + "vdout11", + "vdout12", + "vdout13", + "vdout14", + "vdout15", + "vdout16", + "vdout17", + "vdout18", + "vdout19", + "vdout20", + "vdout21", + "vdout22", + "vdout23", + "vdin0", + "vdin1", + "vdin2", + "vdin3", + "vdin4", + "vdin5", + "vdin6", + "vdin7", + "i2c1_scl", + "i2c1_sda", + "spi0_mosi", + "spi0_miso", + "spi0_ss0", + "spi0_clk", + "sd0_data0", + "sd0_data1", + "sd0_data2", + "sd0_data3", + "sd0_clk", + "sd0_wp", + "sd0_cmd", + "sd1_data0", + "sd1_data1", + "sd1_data2", + "sd1_data3", + "sd1_data4", + "sd1_data5", + "sd1_data6", + "sd1_data7", + "i2c0_scl", + "i2c0_sda", + "uart0_rts", + "uart0_txd", + "uart0_cts", + "uart0_rxd", + "uart1_rts", + "uart1_txd", + "uart1_cts", + "uart1_rxd", + "uart2_rts", + "uart2_txd", + "uart2_cts", + "uart2_rxd", + "uart3_rts", + "uart3_txd", + "uart3_cts", + "uart3_rxd", + "kpadrow0", + "kpadrow1", + "kpadcol0", + "kpadcol1", + "sd1_clk", + "sd1_cmd", + "sd1_wp", +}; + +static int wm8650_pinctrl_probe(struct platform_device *pdev) +{ + struct wmt_pinctrl_data *data; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) { + dev_err(&pdev->dev, "failed to allocate data\n"); + return -ENOMEM; + } + + data->banks = wm8650_banks; + data->nbanks = ARRAY_SIZE(wm8650_banks); + data->pins = wm8650_pins; + data->npins = ARRAY_SIZE(wm8650_pins); + data->groups = wm8650_groups; + data->ngroups = ARRAY_SIZE(wm8650_groups); + + return wmt_pinctrl_probe(pdev, data); +} + +static int wm8650_pinctrl_remove(struct platform_device *pdev) +{ + return wmt_pinctrl_remove(pdev); +} + +static struct of_device_id wmt_pinctrl_of_match[] = { + { .compatible = "wm,wm8650-pinctrl" }, + { /* sentinel */ }, +}; + +static struct platform_driver wmt_pinctrl_driver = { + .probe = wm8650_pinctrl_probe, + .remove = wm8650_pinctrl_remove, + .driver = { + .name = "pinctrl-wm8650", + .owner = THIS_MODULE, + .of_match_table = wmt_pinctrl_of_match, + }, +}; + +module_platform_driver(wmt_pinctrl_driver); + +MODULE_AUTHOR("Tony Prisk <linux@prisktech.co.nz>"); +MODULE_DESCRIPTION("Wondermedia WM8650 Pincontrol driver"); +MODULE_LICENSE("GPL v2"); +MODULE_DEVICE_TABLE(of, wmt_pinctrl_of_match); diff --git a/drivers/pinctrl/vt8500/pinctrl-wm8750.c b/drivers/pinctrl/vt8500/pinctrl-wm8750.c new file mode 100644 index 0000000..b964cc5 --- /dev/null +++ b/drivers/pinctrl/vt8500/pinctrl-wm8750.c @@ -0,0 +1,409 @@ +/* + * Pinctrl data for Wondermedia WM8750 SoC + * + * Copyright (c) 2013 Tony Prisk <linux@prisktech.co.nz> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include <linux/io.h> +#include <linux/module.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +#include "pinctrl-wmt.h" + +/* + * Describe the register offsets within the GPIO memory space + * The dedicated external GPIO's should always be listed in bank 0 + * so they are exported in the 0..31 range which is what users + * expect. + * + * Do not reorder these banks as it will change the pin numbering + */ +static const struct wmt_pinctrl_bank_registers wm8750_banks[] = { + WMT_PINCTRL_BANK(0x40, 0x80, 0xC0, 0x00, 0x480, 0x4C0), /* 0 */ + WMT_PINCTRL_BANK(0x44, 0x84, 0xC4, 0x04, 0x484, 0x4C4), /* 1 */ + WMT_PINCTRL_BANK(0x48, 0x88, 0xC8, 0x08, 0x488, 0x4C8), /* 2 */ + WMT_PINCTRL_BANK(0x4C, 0x8C, 0xCC, 0x0C, 0x48C, 0x4CC), /* 3 */ + WMT_PINCTRL_BANK(0x50, 0x90, 0xD0, 0x10, 0x490, 0x4D0), /* 4 */ + WMT_PINCTRL_BANK(0x54, 0x94, 0xD4, 0x14, 0x494, 0x4D4), /* 5 */ + WMT_PINCTRL_BANK(0x58, 0x98, 0xD8, 0x18, 0x498, 0x4D8), /* 6 */ + WMT_PINCTRL_BANK(0x5C, 0x9C, 0xDC, 0x1C, 0x49C, 0x4DC), /* 7 */ + WMT_PINCTRL_BANK(0x60, 0xA0, 0xE0, 0x20, 0x4A0, 0x4E0), /* 8 */ + WMT_PINCTRL_BANK(0x70, 0xB0, 0xF0, 0x30, 0x4B0, 0x4F0), /* 9 */ + WMT_PINCTRL_BANK(0x7C, 0xBC, 0xDC, 0x3C, 0x4BC, 0x4FC), /* 10 */ +}; + +/* Please keep sorted by bank/bit */ +#define WMT_PIN_EXTGPIO0 WMT_PIN(0, 0) +#define WMT_PIN_EXTGPIO1 WMT_PIN(0, 1) +#define WMT_PIN_EXTGPIO2 WMT_PIN(0, 2) +#define WMT_PIN_EXTGPIO3 WMT_PIN(0, 3) +#define WMT_PIN_EXTGPIO4 WMT_PIN(0, 4) +#define WMT_PIN_EXTGPIO5 WMT_PIN(0, 5) +#define WMT_PIN_EXTGPIO6 WMT_PIN(0, 6) +#define WMT_PIN_EXTGPIO7 WMT_PIN(0, 7) +#define WMT_PIN_WAKEUP0 WMT_PIN(0, 16) +#define WMT_PIN_WAKEUP1 WMT_PIN(0, 16) +#define WMT_PIN_SD0CD WMT_PIN(0, 28) +#define WMT_PIN_VDOUT0 WMT_PIN(1, 0) +#define WMT_PIN_VDOUT1 WMT_PIN(1, 1) +#define WMT_PIN_VDOUT2 WMT_PIN(1, 2) +#define WMT_PIN_VDOUT3 WMT_PIN(1, 3) +#define WMT_PIN_VDOUT4 WMT_PIN(1, 4) +#define WMT_PIN_VDOUT5 WMT_PIN(1, 5) +#define WMT_PIN_VDOUT6 WMT_PIN(1, 6) +#define WMT_PIN_VDOUT7 WMT_PIN(1, 7) +#define WMT_PIN_VDOUT8 WMT_PIN(1, 8) +#define WMT_PIN_VDOUT9 WMT_PIN(1, 9) +#define WMT_PIN_VDOUT10 WMT_PIN(1, 10) +#define WMT_PIN_VDOUT11 WMT_PIN(1, 11) +#define WMT_PIN_VDOUT12 WMT_PIN(1, 12) +#define WMT_PIN_VDOUT13 WMT_PIN(1, 13) +#define WMT_PIN_VDOUT14 WMT_PIN(1, 14) +#define WMT_PIN_VDOUT15 WMT_PIN(1, 15) +#define WMT_PIN_VDOUT16 WMT_PIN(1, 16) +#define WMT_PIN_VDOUT17 WMT_PIN(1, 17) +#define WMT_PIN_VDOUT18 WMT_PIN(1, 18) +#define WMT_PIN_VDOUT19 WMT_PIN(1, 19) +#define WMT_PIN_VDOUT20 WMT_PIN(1, 20) +#define WMT_PIN_VDOUT21 WMT_PIN(1, 21) +#define WMT_PIN_VDOUT22 WMT_PIN(1, 22) +#define WMT_PIN_VDOUT23 WMT_PIN(1, 23) +#define WMT_PIN_VDIN0 WMT_PIN(2, 0) +#define WMT_PIN_VDIN1 WMT_PIN(2, 1) +#define WMT_PIN_VDIN2 WMT_PIN(2, 2) +#define WMT_PIN_VDIN3 WMT_PIN(2, 3) +#define WMT_PIN_VDIN4 WMT_PIN(2, 4) +#define WMT_PIN_VDIN5 WMT_PIN(2, 5) +#define WMT_PIN_VDIN6 WMT_PIN(2, 6) +#define WMT_PIN_VDIN7 WMT_PIN(2, 7) +#define WMT_PIN_SPI0_MOSI WMT_PIN(2, 24) +#define WMT_PIN_SPI0_MISO WMT_PIN(2, 25) +#define WMT_PIN_SPI0_SS WMT_PIN(2, 26) +#define WMT_PIN_SPI0_CLK WMT_PIN(2, 27) +#define WMT_PIN_SPI0_SSB WMT_PIN(2, 28) +#define WMT_PIN_SD0CLK WMT_PIN(3, 17) +#define WMT_PIN_SD0CMD WMT_PIN(3, 18) +#define WMT_PIN_SD0WP WMT_PIN(3, 19) +#define WMT_PIN_SD0DATA0 WMT_PIN(3, 20) +#define WMT_PIN_SD0DATA1 WMT_PIN(3, 21) +#define WMT_PIN_SD0DATA2 WMT_PIN(3, 22) +#define WMT_PIN_SD0DATA3 WMT_PIN(3, 23) +#define WMT_PIN_SD1DATA0 WMT_PIN(3, 24) +#define WMT_PIN_SD1DATA1 WMT_PIN(3, 25) +#define WMT_PIN_SD1DATA2 WMT_PIN(3, 26) +#define WMT_PIN_SD1DATA3 WMT_PIN(3, 27) +#define WMT_PIN_SD1DATA4 WMT_PIN(3, 28) +#define WMT_PIN_SD1DATA5 WMT_PIN(3, 29) +#define WMT_PIN_SD1DATA6 WMT_PIN(3, 30) +#define WMT_PIN_SD1DATA7 WMT_PIN(3, 31) +#define WMT_PIN_I2C0_SCL WMT_PIN(5, 8) +#define WMT_PIN_I2C0_SDA WMT_PIN(5, 9) +#define WMT_PIN_I2C1_SCL WMT_PIN(5, 10) +#define WMT_PIN_I2C1_SDA WMT_PIN(5, 11) +#define WMT_PIN_I2C2_SCL WMT_PIN(5, 12) +#define WMT_PIN_I2C2_SDA WMT_PIN(5, 13) +#define WMT_PIN_UART0_RTS WMT_PIN(5, 16) +#define WMT_PIN_UART0_TXD WMT_PIN(5, 17) +#define WMT_PIN_UART0_CTS WMT_PIN(5, 18) +#define WMT_PIN_UART0_RXD WMT_PIN(5, 19) +#define WMT_PIN_UART1_RTS WMT_PIN(5, 20) +#define WMT_PIN_UART1_TXD WMT_PIN(5, 21) +#define WMT_PIN_UART1_CTS WMT_PIN(5, 22) +#define WMT_PIN_UART1_RXD WMT_PIN(5, 23) +#define WMT_PIN_UART2_RTS WMT_PIN(5, 24) +#define WMT_PIN_UART2_TXD WMT_PIN(5, 25) +#define WMT_PIN_UART2_CTS WMT_PIN(5, 26) +#define WMT_PIN_UART2_RXD WMT_PIN(5, 27) +#define WMT_PIN_UART3_RTS WMT_PIN(5, 28) +#define WMT_PIN_UART3_TXD WMT_PIN(5, 29) +#define WMT_PIN_UART3_CTS WMT_PIN(5, 30) +#define WMT_PIN_UART3_RXD WMT_PIN(5, 31) +#define WMT_PIN_SD2CD WMT_PIN(6, 0) +#define WMT_PIN_SD2DATA3 WMT_PIN(6, 1) +#define WMT_PIN_SD2DATA0 WMT_PIN(6, 2) +#define WMT_PIN_SD2WP WMT_PIN(6, 3) +#define WMT_PIN_SD2DATA1 WMT_PIN(6, 4) +#define WMT_PIN_SD2DATA2 WMT_PIN(6, 5) +#define WMT_PIN_SD2CMD WMT_PIN(6, 6) +#define WMT_PIN_SD2CLK WMT_PIN(6, 7) +#define WMT_PIN_SD2PWR WMT_PIN(6, 9) +#define WMT_PIN_SD1CLK WMT_PIN(7, 0) +#define WMT_PIN_SD1CMD WMT_PIN(7, 1) +#define WMT_PIN_SD1PWR WMT_PIN(7, 10) +#define WMT_PIN_SD1WP WMT_PIN(7, 11) +#define WMT_PIN_SD1CD WMT_PIN(7, 12) +#define WMT_PIN_SPI0SS3 WMT_PIN(7, 24) +#define WMT_PIN_SPI0SS2 WMT_PIN(7, 25) +#define WMT_PIN_PWMOUT1 WMT_PIN(7, 26) +#define WMT_PIN_PWMOUT0 WMT_PIN(7, 27) + +static const struct pinctrl_pin_desc wm8750_pins[] = { + PINCTRL_PIN(WMT_PIN_EXTGPIO0, "extgpio0"), + PINCTRL_PIN(WMT_PIN_EXTGPIO1, "extgpio1"), + PINCTRL_PIN(WMT_PIN_EXTGPIO2, "extgpio2"), + PINCTRL_PIN(WMT_PIN_EXTGPIO3, "extgpio3"), + PINCTRL_PIN(WMT_PIN_EXTGPIO4, "extgpio4"), + PINCTRL_PIN(WMT_PIN_EXTGPIO5, "extgpio5"), + PINCTRL_PIN(WMT_PIN_EXTGPIO6, "extgpio6"), + PINCTRL_PIN(WMT_PIN_EXTGPIO7, "extgpio7"), + PINCTRL_PIN(WMT_PIN_WAKEUP0, "wakeup0"), + PINCTRL_PIN(WMT_PIN_WAKEUP1, "wakeup1"), + PINCTRL_PIN(WMT_PIN_SD0CD, "sd0_cd"), + PINCTRL_PIN(WMT_PIN_VDOUT0, "vdout0"), + PINCTRL_PIN(WMT_PIN_VDOUT1, "vdout1"), + PINCTRL_PIN(WMT_PIN_VDOUT2, "vdout2"), + PINCTRL_PIN(WMT_PIN_VDOUT3, "vdout3"), + PINCTRL_PIN(WMT_PIN_VDOUT4, "vdout4"), + PINCTRL_PIN(WMT_PIN_VDOUT5, "vdout5"), + PINCTRL_PIN(WMT_PIN_VDOUT6, "vdout6"), + PINCTRL_PIN(WMT_PIN_VDOUT7, "vdout7"), + PINCTRL_PIN(WMT_PIN_VDOUT8, "vdout8"), + PINCTRL_PIN(WMT_PIN_VDOUT9, "vdout9"), + PINCTRL_PIN(WMT_PIN_VDOUT10, "vdout10"), + PINCTRL_PIN(WMT_PIN_VDOUT11, "vdout11"), + PINCTRL_PIN(WMT_PIN_VDOUT12, "vdout12"), + PINCTRL_PIN(WMT_PIN_VDOUT13, "vdout13"), + PINCTRL_PIN(WMT_PIN_VDOUT14, "vdout14"), + PINCTRL_PIN(WMT_PIN_VDOUT15, "vdout15"), + PINCTRL_PIN(WMT_PIN_VDOUT16, "vdout16"), + PINCTRL_PIN(WMT_PIN_VDOUT17, "vdout17"), + PINCTRL_PIN(WMT_PIN_VDOUT18, "vdout18"), + PINCTRL_PIN(WMT_PIN_VDOUT19, "vdout19"), + PINCTRL_PIN(WMT_PIN_VDOUT20, "vdout20"), + PINCTRL_PIN(WMT_PIN_VDOUT21, "vdout21"), + PINCTRL_PIN(WMT_PIN_VDOUT22, "vdout22"), + PINCTRL_PIN(WMT_PIN_VDOUT23, "vdout23"), + PINCTRL_PIN(WMT_PIN_VDIN0, "vdin0"), + PINCTRL_PIN(WMT_PIN_VDIN1, "vdin1"), + PINCTRL_PIN(WMT_PIN_VDIN2, "vdin2"), + PINCTRL_PIN(WMT_PIN_VDIN3, "vdin3"), + PINCTRL_PIN(WMT_PIN_VDIN4, "vdin4"), + PINCTRL_PIN(WMT_PIN_VDIN5, "vdin5"), + PINCTRL_PIN(WMT_PIN_VDIN6, "vdin6"), + PINCTRL_PIN(WMT_PIN_VDIN7, "vdin7"), + PINCTRL_PIN(WMT_PIN_SPI0_MOSI, "spi0_mosi"), + PINCTRL_PIN(WMT_PIN_SPI0_MISO, "spi0_miso"), + PINCTRL_PIN(WMT_PIN_SPI0_SS, "spi0_ss"), + PINCTRL_PIN(WMT_PIN_SPI0_CLK, "spi0_clk"), + PINCTRL_PIN(WMT_PIN_SPI0_SSB, "spi0_ssb"), + PINCTRL_PIN(WMT_PIN_SD0CLK, "sd0_clk"), + PINCTRL_PIN(WMT_PIN_SD0CMD, "sd0_cmd"), + PINCTRL_PIN(WMT_PIN_SD0WP, "sd0_wp"), + PINCTRL_PIN(WMT_PIN_SD0DATA0, "sd0_data0"), + PINCTRL_PIN(WMT_PIN_SD0DATA1, "sd0_data1"), + PINCTRL_PIN(WMT_PIN_SD0DATA2, "sd0_data2"), + PINCTRL_PIN(WMT_PIN_SD0DATA3, "sd0_data3"), + PINCTRL_PIN(WMT_PIN_SD1DATA0, "sd1_data0"), + PINCTRL_PIN(WMT_PIN_SD1DATA1, "sd1_data1"), + PINCTRL_PIN(WMT_PIN_SD1DATA2, "sd1_data2"), + PINCTRL_PIN(WMT_PIN_SD1DATA3, "sd1_data3"), + PINCTRL_PIN(WMT_PIN_SD1DATA4, "sd1_data4"), + PINCTRL_PIN(WMT_PIN_SD1DATA5, "sd1_data5"), + PINCTRL_PIN(WMT_PIN_SD1DATA6, "sd1_data6"), + PINCTRL_PIN(WMT_PIN_SD1DATA7, "sd1_data7"), + PINCTRL_PIN(WMT_PIN_I2C0_SCL, "i2c0_scl"), + PINCTRL_PIN(WMT_PIN_I2C0_SDA, "i2c0_sda"), + PINCTRL_PIN(WMT_PIN_I2C1_SCL, "i2c1_scl"), + PINCTRL_PIN(WMT_PIN_I2C1_SDA, "i2c1_sda"), + PINCTRL_PIN(WMT_PIN_I2C2_SCL, "i2c2_scl"), + PINCTRL_PIN(WMT_PIN_I2C2_SDA, "i2c2_sda"), + PINCTRL_PIN(WMT_PIN_UART0_RTS, "uart0_rts"), + PINCTRL_PIN(WMT_PIN_UART0_TXD, "uart0_txd"), + PINCTRL_PIN(WMT_PIN_UART0_CTS, "uart0_cts"), + PINCTRL_PIN(WMT_PIN_UART0_RXD, "uart0_rxd"), + PINCTRL_PIN(WMT_PIN_UART1_RTS, "uart1_rts"), + PINCTRL_PIN(WMT_PIN_UART1_TXD, "uart1_txd"), + PINCTRL_PIN(WMT_PIN_UART1_CTS, "uart1_cts"), + PINCTRL_PIN(WMT_PIN_UART1_RXD, "uart1_rxd"), + PINCTRL_PIN(WMT_PIN_UART2_RTS, "uart2_rts"), + PINCTRL_PIN(WMT_PIN_UART2_TXD, "uart2_txd"), + PINCTRL_PIN(WMT_PIN_UART2_CTS, "uart2_cts"), + PINCTRL_PIN(WMT_PIN_UART2_RXD, "uart2_rxd"), + PINCTRL_PIN(WMT_PIN_UART3_RTS, "uart3_rts"), + PINCTRL_PIN(WMT_PIN_UART3_TXD, "uart3_txd"), + PINCTRL_PIN(WMT_PIN_UART3_CTS, "uart3_cts"), + PINCTRL_PIN(WMT_PIN_UART3_RXD, "uart3_rxd"), + PINCTRL_PIN(WMT_PIN_SD2CD, "sd2_cd"), + PINCTRL_PIN(WMT_PIN_SD2DATA3, "sd2_data3"), + PINCTRL_PIN(WMT_PIN_SD2DATA0, "sd2_data0"), + PINCTRL_PIN(WMT_PIN_SD2WP, "sd2_wp"), + PINCTRL_PIN(WMT_PIN_SD2DATA1, "sd2_data1"), + PINCTRL_PIN(WMT_PIN_SD2DATA2, "sd2_data2"), + PINCTRL_PIN(WMT_PIN_SD2CMD, "sd2_cmd"), + PINCTRL_PIN(WMT_PIN_SD2CLK, "sd2_clk"), + PINCTRL_PIN(WMT_PIN_SD2PWR, "sd2_pwr"), + PINCTRL_PIN(WMT_PIN_SD1CLK, "sd1_clk"), + PINCTRL_PIN(WMT_PIN_SD1CMD, "sd1_cmd"), + PINCTRL_PIN(WMT_PIN_SD1PWR, "sd1_pwr"), + PINCTRL_PIN(WMT_PIN_SD1WP, "sd1_wp"), + PINCTRL_PIN(WMT_PIN_SD1CD, "sd1_cd"), + PINCTRL_PIN(WMT_PIN_SPI0SS3, "spi0_ss3"), + PINCTRL_PIN(WMT_PIN_SPI0SS2, "spi0_ss2"), + PINCTRL_PIN(WMT_PIN_PWMOUT1, "pwmout1"), + PINCTRL_PIN(WMT_PIN_PWMOUT0, "pwmout0"), +}; + +/* Order of these names must match the above list */ +static const char * const wm8750_groups[] = { + "extgpio0", + "extgpio1", + "extgpio2", + "extgpio3", + "extgpio4", + "extgpio5", + "extgpio6", + "extgpio7", + "wakeup0", + "wakeup1", + "sd0_cd", + "vdout0", + "vdout1", + "vdout2", + "vdout3", + "vdout4", + "vdout5", + "vdout6", + "vdout7", + "vdout8", + "vdout9", + "vdout10", + "vdout11", + "vdout12", + "vdout13", + "vdout14", + "vdout15", + "vdout16", + "vdout17", + "vdout18", + "vdout19", + "vdout20", + "vdout21", + "vdout22", + "vdout23", + "vdin0", + "vdin1", + "vdin2", + "vdin3", + "vdin4", + "vdin5", + "vdin6", + "vdin7", + "spi0_mosi", + "spi0_miso", + "spi0_ss", + "spi0_clk", + "spi0_ssb", + "sd0_clk", + "sd0_cmd", + "sd0_wp", + "sd0_data0", + "sd0_data1", + "sd0_data2", + "sd0_data3", + "sd1_data0", + "sd1_data1", + "sd1_data2", + "sd1_data3", + "sd1_data4", + "sd1_data5", + "sd1_data6", + "sd1_data7", + "i2c0_scl", + "i2c0_sda", + "i2c1_scl", + "i2c1_sda", + "i2c2_scl", + "i2c2_sda", + "uart0_rts", + "uart0_txd", + "uart0_cts", + "uart0_rxd", + "uart1_rts", + "uart1_txd", + "uart1_cts", + "uart1_rxd", + "uart2_rts", + "uart2_txd", + "uart2_cts", + "uart2_rxd", + "uart3_rts", + "uart3_txd", + "uart3_cts", + "uart3_rxd", + "sd2_cd", + "sd2_data3", + "sd2_data0", + "sd2_wp", + "sd2_data1", + "sd2_data2", + "sd2_cmd", + "sd2_clk", + "sd2_pwr", + "sd1_clk", + "sd1_cmd", + "sd1_pwr", + "sd1_wp", + "sd1_cd", + "spi0_ss3", + "spi0_ss2", + "pwmout1", + "pwmout0", +}; + +static int wm8750_pinctrl_probe(struct platform_device *pdev) +{ + struct wmt_pinctrl_data *data; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) { + dev_err(&pdev->dev, "failed to allocate data\n"); + return -ENOMEM; + } + + data->banks = wm8750_banks; + data->nbanks = ARRAY_SIZE(wm8750_banks); + data->pins = wm8750_pins; + data->npins = ARRAY_SIZE(wm8750_pins); + data->groups = wm8750_groups; + data->ngroups = ARRAY_SIZE(wm8750_groups); + + return wmt_pinctrl_probe(pdev, data); +} + +static int wm8750_pinctrl_remove(struct platform_device *pdev) +{ + return wmt_pinctrl_remove(pdev); +} + +static struct of_device_id wmt_pinctrl_of_match[] = { + { .compatible = "wm,wm8750-pinctrl" }, + { /* sentinel */ }, +}; + +static struct platform_driver wmt_pinctrl_driver = { + .probe = wm8750_pinctrl_probe, + .remove = wm8750_pinctrl_remove, + .driver = { + .name = "pinctrl-wm8750", + .owner = THIS_MODULE, + .of_match_table = wmt_pinctrl_of_match, + }, +}; + +module_platform_driver(wmt_pinctrl_driver); + +MODULE_AUTHOR("Tony Prisk <linux@prisktech.co.nz>"); +MODULE_DESCRIPTION("Wondermedia WM8750 Pincontrol driver"); +MODULE_LICENSE("GPL v2"); +MODULE_DEVICE_TABLE(of, wmt_pinctrl_of_match); diff --git a/drivers/pinctrl/vt8500/pinctrl-wm8850.c b/drivers/pinctrl/vt8500/pinctrl-wm8850.c new file mode 100644 index 0000000..ecadce9c --- /dev/null +++ b/drivers/pinctrl/vt8500/pinctrl-wm8850.c @@ -0,0 +1,388 @@ +/* + * Pinctrl data for Wondermedia WM8850 SoC + * + * Copyright (c) 2013 Tony Prisk <linux@prisktech.co.nz> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include <linux/io.h> +#include <linux/module.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +#include "pinctrl-wmt.h" + +/* + * Describe the register offsets within the GPIO memory space + * The dedicated external GPIO's should always be listed in bank 0 + * so they are exported in the 0..31 range which is what users + * expect. + * + * Do not reorder these banks as it will change the pin numbering + */ +static const struct wmt_pinctrl_bank_registers wm8850_banks[] = { + WMT_PINCTRL_BANK(0x40, 0x80, 0xC0, 0x00, 0x480, 0x4C0), /* 0 */ + WMT_PINCTRL_BANK(0x44, 0x84, 0xC4, 0x04, 0x484, 0x4C4), /* 1 */ + WMT_PINCTRL_BANK(0x48, 0x88, 0xC8, 0x08, 0x488, 0x4C8), /* 2 */ + WMT_PINCTRL_BANK(0x4C, 0x8C, 0xCC, 0x0C, 0x48C, 0x4CC), /* 3 */ + WMT_PINCTRL_BANK(0x50, 0x90, 0xD0, 0x10, 0x490, 0x4D0), /* 4 */ + WMT_PINCTRL_BANK(0x54, 0x94, 0xD4, 0x14, 0x494, 0x4D4), /* 5 */ + WMT_PINCTRL_BANK(0x58, 0x98, 0xD8, 0x18, 0x498, 0x4D8), /* 6 */ + WMT_PINCTRL_BANK(0x5C, 0x9C, 0xDC, 0x1C, 0x49C, 0x4DC), /* 7 */ + WMT_PINCTRL_BANK(0x60, 0xA0, 0xE0, 0x20, 0x4A0, 0x4E0), /* 8 */ + WMT_PINCTRL_BANK(0x70, 0xB0, 0xF0, 0x30, 0x4B0, 0x4F0), /* 9 */ + WMT_PINCTRL_BANK(0x7C, 0xBC, 0xDC, 0x3C, 0x4BC, 0x4FC), /* 10 */ +}; + +/* Please keep sorted by bank/bit */ +#define WMT_PIN_EXTGPIO0 WMT_PIN(0, 0) +#define WMT_PIN_EXTGPIO1 WMT_PIN(0, 1) +#define WMT_PIN_EXTGPIO2 WMT_PIN(0, 2) +#define WMT_PIN_EXTGPIO3 WMT_PIN(0, 3) +#define WMT_PIN_EXTGPIO4 WMT_PIN(0, 4) +#define WMT_PIN_EXTGPIO5 WMT_PIN(0, 5) +#define WMT_PIN_EXTGPIO6 WMT_PIN(0, 6) +#define WMT_PIN_EXTGPIO7 WMT_PIN(0, 7) +#define WMT_PIN_WAKEUP0 WMT_PIN(0, 16) +#define WMT_PIN_WAKEUP1 WMT_PIN(0, 17) +#define WMT_PIN_WAKEUP2 WMT_PIN(0, 18) +#define WMT_PIN_WAKEUP3 WMT_PIN(0, 19) +#define WMT_PIN_SUSGPIO0 WMT_PIN(0, 21) +#define WMT_PIN_SUSGPIO1 WMT_PIN(0, 22) +#define WMT_PIN_SD0CD WMT_PIN(0, 28) +#define WMT_PIN_VDOUT0 WMT_PIN(1, 0) +#define WMT_PIN_VDOUT1 WMT_PIN(1, 1) +#define WMT_PIN_VDOUT2 WMT_PIN(1, 2) +#define WMT_PIN_VDOUT3 WMT_PIN(1, 3) +#define WMT_PIN_VDOUT4 WMT_PIN(1, 4) +#define WMT_PIN_VDOUT5 WMT_PIN(1, 5) +#define WMT_PIN_VDOUT6 WMT_PIN(1, 6) +#define WMT_PIN_VDOUT7 WMT_PIN(1, 7) +#define WMT_PIN_VDOUT8 WMT_PIN(1, 8) +#define WMT_PIN_VDOUT9 WMT_PIN(1, 9) +#define WMT_PIN_VDOUT10 WMT_PIN(1, 10) +#define WMT_PIN_VDOUT11 WMT_PIN(1, 11) +#define WMT_PIN_VDOUT12 WMT_PIN(1, 12) +#define WMT_PIN_VDOUT13 WMT_PIN(1, 13) +#define WMT_PIN_VDOUT14 WMT_PIN(1, 14) +#define WMT_PIN_VDOUT15 WMT_PIN(1, 15) +#define WMT_PIN_VDOUT16 WMT_PIN(1, 16) +#define WMT_PIN_VDOUT17 WMT_PIN(1, 17) +#define WMT_PIN_VDOUT18 WMT_PIN(1, 18) +#define WMT_PIN_VDOUT19 WMT_PIN(1, 19) +#define WMT_PIN_VDOUT20 WMT_PIN(1, 20) +#define WMT_PIN_VDOUT21 WMT_PIN(1, 21) +#define WMT_PIN_VDOUT22 WMT_PIN(1, 22) +#define WMT_PIN_VDOUT23 WMT_PIN(1, 23) +#define WMT_PIN_VDIN0 WMT_PIN(2, 0) +#define WMT_PIN_VDIN1 WMT_PIN(2, 1) +#define WMT_PIN_VDIN2 WMT_PIN(2, 2) +#define WMT_PIN_VDIN3 WMT_PIN(2, 3) +#define WMT_PIN_VDIN4 WMT_PIN(2, 4) +#define WMT_PIN_VDIN5 WMT_PIN(2, 5) +#define WMT_PIN_VDIN6 WMT_PIN(2, 6) +#define WMT_PIN_VDIN7 WMT_PIN(2, 7) +#define WMT_PIN_SPI0_MOSI WMT_PIN(2, 24) +#define WMT_PIN_SPI0_MISO WMT_PIN(2, 25) +#define WMT_PIN_SPI0_SS WMT_PIN(2, 26) +#define WMT_PIN_SPI0_CLK WMT_PIN(2, 27) +#define WMT_PIN_SPI0_SSB WMT_PIN(2, 28) +#define WMT_PIN_SD0CLK WMT_PIN(3, 17) +#define WMT_PIN_SD0CMD WMT_PIN(3, 18) +#define WMT_PIN_SD0WP WMT_PIN(3, 19) +#define WMT_PIN_SD0DATA0 WMT_PIN(3, 20) +#define WMT_PIN_SD0DATA1 WMT_PIN(3, 21) +#define WMT_PIN_SD0DATA2 WMT_PIN(3, 22) +#define WMT_PIN_SD0DATA3 WMT_PIN(3, 23) +#define WMT_PIN_SD1DATA0 WMT_PIN(3, 24) +#define WMT_PIN_SD1DATA1 WMT_PIN(3, 25) +#define WMT_PIN_SD1DATA2 WMT_PIN(3, 26) +#define WMT_PIN_SD1DATA3 WMT_PIN(3, 27) +#define WMT_PIN_SD1DATA4 WMT_PIN(3, 28) +#define WMT_PIN_SD1DATA5 WMT_PIN(3, 29) +#define WMT_PIN_SD1DATA6 WMT_PIN(3, 30) +#define WMT_PIN_SD1DATA7 WMT_PIN(3, 31) +#define WMT_PIN_I2C0_SCL WMT_PIN(5, 8) +#define WMT_PIN_I2C0_SDA WMT_PIN(5, 9) +#define WMT_PIN_I2C1_SCL WMT_PIN(5, 10) +#define WMT_PIN_I2C1_SDA WMT_PIN(5, 11) +#define WMT_PIN_I2C2_SCL WMT_PIN(5, 12) +#define WMT_PIN_I2C2_SDA WMT_PIN(5, 13) +#define WMT_PIN_UART0_RTS WMT_PIN(5, 16) +#define WMT_PIN_UART0_TXD WMT_PIN(5, 17) +#define WMT_PIN_UART0_CTS WMT_PIN(5, 18) +#define WMT_PIN_UART0_RXD WMT_PIN(5, 19) +#define WMT_PIN_UART1_RTS WMT_PIN(5, 20) +#define WMT_PIN_UART1_TXD WMT_PIN(5, 21) +#define WMT_PIN_UART1_CTS WMT_PIN(5, 22) +#define WMT_PIN_UART1_RXD WMT_PIN(5, 23) +#define WMT_PIN_UART2_RTS WMT_PIN(5, 24) +#define WMT_PIN_UART2_TXD WMT_PIN(5, 25) +#define WMT_PIN_UART2_CTS WMT_PIN(5, 26) +#define WMT_PIN_UART2_RXD WMT_PIN(5, 27) +#define WMT_PIN_SD2WP WMT_PIN(6, 3) +#define WMT_PIN_SD2CMD WMT_PIN(6, 6) +#define WMT_PIN_SD2CLK WMT_PIN(6, 7) +#define WMT_PIN_SD2PWR WMT_PIN(6, 9) +#define WMT_PIN_SD1CLK WMT_PIN(7, 0) +#define WMT_PIN_SD1CMD WMT_PIN(7, 1) +#define WMT_PIN_SD1PWR WMT_PIN(7, 10) +#define WMT_PIN_SD1WP WMT_PIN(7, 11) +#define WMT_PIN_SD1CD WMT_PIN(7, 12) +#define WMT_PIN_PWMOUT1 WMT_PIN(7, 26) +#define WMT_PIN_PWMOUT0 WMT_PIN(7, 27) + +static const struct pinctrl_pin_desc wm8850_pins[] = { + PINCTRL_PIN(WMT_PIN_EXTGPIO0, "extgpio0"), + PINCTRL_PIN(WMT_PIN_EXTGPIO1, "extgpio1"), + PINCTRL_PIN(WMT_PIN_EXTGPIO2, "extgpio2"), + PINCTRL_PIN(WMT_PIN_EXTGPIO3, "extgpio3"), + PINCTRL_PIN(WMT_PIN_EXTGPIO4, "extgpio4"), + PINCTRL_PIN(WMT_PIN_EXTGPIO5, "extgpio5"), + PINCTRL_PIN(WMT_PIN_EXTGPIO6, "extgpio6"), + PINCTRL_PIN(WMT_PIN_EXTGPIO7, "extgpio7"), + PINCTRL_PIN(WMT_PIN_WAKEUP0, "wakeup0"), + PINCTRL_PIN(WMT_PIN_WAKEUP1, "wakeup1"), + PINCTRL_PIN(WMT_PIN_WAKEUP2, "wakeup2"), + PINCTRL_PIN(WMT_PIN_WAKEUP3, "wakeup3"), + PINCTRL_PIN(WMT_PIN_SUSGPIO0, "susgpio0"), + PINCTRL_PIN(WMT_PIN_SUSGPIO1, "susgpio1"), + PINCTRL_PIN(WMT_PIN_SD0CD, "sd0_cd"), + PINCTRL_PIN(WMT_PIN_VDOUT0, "vdout0"), + PINCTRL_PIN(WMT_PIN_VDOUT1, "vdout1"), + PINCTRL_PIN(WMT_PIN_VDOUT2, "vdout2"), + PINCTRL_PIN(WMT_PIN_VDOUT3, "vdout3"), + PINCTRL_PIN(WMT_PIN_VDOUT4, "vdout4"), + PINCTRL_PIN(WMT_PIN_VDOUT5, "vdout5"), + PINCTRL_PIN(WMT_PIN_VDOUT6, "vdout6"), + PINCTRL_PIN(WMT_PIN_VDOUT7, "vdout7"), + PINCTRL_PIN(WMT_PIN_VDOUT8, "vdout8"), + PINCTRL_PIN(WMT_PIN_VDOUT9, "vdout9"), + PINCTRL_PIN(WMT_PIN_VDOUT10, "vdout10"), + PINCTRL_PIN(WMT_PIN_VDOUT11, "vdout11"), + PINCTRL_PIN(WMT_PIN_VDOUT12, "vdout12"), + PINCTRL_PIN(WMT_PIN_VDOUT13, "vdout13"), + PINCTRL_PIN(WMT_PIN_VDOUT14, "vdout14"), + PINCTRL_PIN(WMT_PIN_VDOUT15, "vdout15"), + PINCTRL_PIN(WMT_PIN_VDOUT16, "vdout16"), + PINCTRL_PIN(WMT_PIN_VDOUT17, "vdout17"), + PINCTRL_PIN(WMT_PIN_VDOUT18, "vdout18"), + PINCTRL_PIN(WMT_PIN_VDOUT19, "vdout19"), + PINCTRL_PIN(WMT_PIN_VDOUT20, "vdout20"), + PINCTRL_PIN(WMT_PIN_VDOUT21, "vdout21"), + PINCTRL_PIN(WMT_PIN_VDOUT22, "vdout22"), + PINCTRL_PIN(WMT_PIN_VDOUT23, "vdout23"), + PINCTRL_PIN(WMT_PIN_VDIN0, "vdin0"), + PINCTRL_PIN(WMT_PIN_VDIN1, "vdin1"), + PINCTRL_PIN(WMT_PIN_VDIN2, "vdin2"), + PINCTRL_PIN(WMT_PIN_VDIN3, "vdin3"), + PINCTRL_PIN(WMT_PIN_VDIN4, "vdin4"), + PINCTRL_PIN(WMT_PIN_VDIN5, "vdin5"), + PINCTRL_PIN(WMT_PIN_VDIN6, "vdin6"), + PINCTRL_PIN(WMT_PIN_VDIN7, "vdin7"), + PINCTRL_PIN(WMT_PIN_SPI0_MOSI, "spi0_mosi"), + PINCTRL_PIN(WMT_PIN_SPI0_MISO, "spi0_miso"), + PINCTRL_PIN(WMT_PIN_SPI0_SS, "spi0_ss"), + PINCTRL_PIN(WMT_PIN_SPI0_CLK, "spi0_clk"), + PINCTRL_PIN(WMT_PIN_SPI0_SSB, "spi0_ssb"), + PINCTRL_PIN(WMT_PIN_SD0CLK, "sd0_clk"), + PINCTRL_PIN(WMT_PIN_SD0CMD, "sd0_cmd"), + PINCTRL_PIN(WMT_PIN_SD0WP, "sd0_wp"), + PINCTRL_PIN(WMT_PIN_SD0DATA0, "sd0_data0"), + PINCTRL_PIN(WMT_PIN_SD0DATA1, "sd0_data1"), + PINCTRL_PIN(WMT_PIN_SD0DATA2, "sd0_data2"), + PINCTRL_PIN(WMT_PIN_SD0DATA3, "sd0_data3"), + PINCTRL_PIN(WMT_PIN_SD1DATA0, "sd1_data0"), + PINCTRL_PIN(WMT_PIN_SD1DATA1, "sd1_data1"), + PINCTRL_PIN(WMT_PIN_SD1DATA2, "sd1_data2"), + PINCTRL_PIN(WMT_PIN_SD1DATA3, "sd1_data3"), + PINCTRL_PIN(WMT_PIN_SD1DATA4, "sd1_data4"), + PINCTRL_PIN(WMT_PIN_SD1DATA5, "sd1_data5"), + PINCTRL_PIN(WMT_PIN_SD1DATA6, "sd1_data6"), + PINCTRL_PIN(WMT_PIN_SD1DATA7, "sd1_data7"), + PINCTRL_PIN(WMT_PIN_I2C0_SCL, "i2c0_scl"), + PINCTRL_PIN(WMT_PIN_I2C0_SDA, "i2c0_sda"), + PINCTRL_PIN(WMT_PIN_I2C1_SCL, "i2c1_scl"), + PINCTRL_PIN(WMT_PIN_I2C1_SDA, "i2c1_sda"), + PINCTRL_PIN(WMT_PIN_I2C2_SCL, "i2c2_scl"), + PINCTRL_PIN(WMT_PIN_I2C2_SDA, "i2c2_sda"), + PINCTRL_PIN(WMT_PIN_UART0_RTS, "uart0_rts"), + PINCTRL_PIN(WMT_PIN_UART0_TXD, "uart0_txd"), + PINCTRL_PIN(WMT_PIN_UART0_CTS, "uart0_cts"), + PINCTRL_PIN(WMT_PIN_UART0_RXD, "uart0_rxd"), + PINCTRL_PIN(WMT_PIN_UART1_RTS, "uart1_rts"), + PINCTRL_PIN(WMT_PIN_UART1_TXD, "uart1_txd"), + PINCTRL_PIN(WMT_PIN_UART1_CTS, "uart1_cts"), + PINCTRL_PIN(WMT_PIN_UART1_RXD, "uart1_rxd"), + PINCTRL_PIN(WMT_PIN_UART2_RTS, "uart2_rts"), + PINCTRL_PIN(WMT_PIN_UART2_TXD, "uart2_txd"), + PINCTRL_PIN(WMT_PIN_UART2_CTS, "uart2_cts"), + PINCTRL_PIN(WMT_PIN_UART2_RXD, "uart2_rxd"), + PINCTRL_PIN(WMT_PIN_SD2WP, "sd2_wp"), + PINCTRL_PIN(WMT_PIN_SD2CMD, "sd2_cmd"), + PINCTRL_PIN(WMT_PIN_SD2CLK, "sd2_clk"), + PINCTRL_PIN(WMT_PIN_SD2PWR, "sd2_pwr"), + PINCTRL_PIN(WMT_PIN_SD1CLK, "sd1_clk"), + PINCTRL_PIN(WMT_PIN_SD1CMD, "sd1_cmd"), + PINCTRL_PIN(WMT_PIN_SD1PWR, "sd1_pwr"), + PINCTRL_PIN(WMT_PIN_SD1WP, "sd1_wp"), + PINCTRL_PIN(WMT_PIN_SD1CD, "sd1_cd"), + PINCTRL_PIN(WMT_PIN_PWMOUT1, "pwmout1"), + PINCTRL_PIN(WMT_PIN_PWMOUT0, "pwmout0"), +}; + +/* Order of these names must match the above list */ +static const char * const wm8850_groups[] = { + "extgpio0", + "extgpio1", + "extgpio2", + "extgpio3", + "extgpio4", + "extgpio5", + "extgpio6", + "extgpio7", + "wakeup0", + "wakeup1", + "wakeup2", + "wakeup3", + "susgpio0", + "susgpio1", + "sd0_cd", + "vdout0", + "vdout1", + "vdout2", + "vdout3", + "vdout4", + "vdout5", + "vdout6", + "vdout7", + "vdout8", + "vdout9", + "vdout10", + "vdout11", + "vdout12", + "vdout13", + "vdout14", + "vdout15", + "vdout16", + "vdout17", + "vdout18", + "vdout19", + "vdout20", + "vdout21", + "vdout22", + "vdout23", + "vdin0", + "vdin1", + "vdin2", + "vdin3", + "vdin4", + "vdin5", + "vdin6", + "vdin7", + "spi0_mosi", + "spi0_miso", + "spi0_ss", + "spi0_clk", + "spi0_ssb", + "sd0_clk", + "sd0_cmd", + "sd0_wp", + "sd0_data0", + "sd0_data1", + "sd0_data2", + "sd0_data3", + "sd1_data0", + "sd1_data1", + "sd1_data2", + "sd1_data3", + "sd1_data4", + "sd1_data5", + "sd1_data6", + "sd1_data7", + "i2c0_scl", + "i2c0_sda", + "i2c1_scl", + "i2c1_sda", + "i2c2_scl", + "i2c2_sda", + "uart0_rts", + "uart0_txd", + "uart0_cts", + "uart0_rxd", + "uart1_rts", + "uart1_txd", + "uart1_cts", + "uart1_rxd", + "uart2_rts", + "uart2_txd", + "uart2_cts", + "uart2_rxd", + "sd2_wp", + "sd2_cmd", + "sd2_clk", + "sd2_pwr", + "sd1_clk", + "sd1_cmd", + "sd1_pwr", + "sd1_wp", + "sd1_cd", + "pwmout1", + "pwmout0", +}; + +static int wm8850_pinctrl_probe(struct platform_device *pdev) +{ + struct wmt_pinctrl_data *data; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) { + dev_err(&pdev->dev, "failed to allocate data\n"); + return -ENOMEM; + } + + data->banks = wm8850_banks; + data->nbanks = ARRAY_SIZE(wm8850_banks); + data->pins = wm8850_pins; + data->npins = ARRAY_SIZE(wm8850_pins); + data->groups = wm8850_groups; + data->ngroups = ARRAY_SIZE(wm8850_groups); + + return wmt_pinctrl_probe(pdev, data); +} + +static int wm8850_pinctrl_remove(struct platform_device *pdev) +{ + return wmt_pinctrl_remove(pdev); +} + +static struct of_device_id wmt_pinctrl_of_match[] = { + { .compatible = "wm,wm8850-pinctrl" }, + { /* sentinel */ }, +}; + +static struct platform_driver wmt_pinctrl_driver = { + .probe = wm8850_pinctrl_probe, + .remove = wm8850_pinctrl_remove, + .driver = { + .name = "pinctrl-wm8850", + .owner = THIS_MODULE, + .of_match_table = wmt_pinctrl_of_match, + }, +}; + +module_platform_driver(wmt_pinctrl_driver); + +MODULE_AUTHOR("Tony Prisk <linux@prisktech.co.nz>"); +MODULE_DESCRIPTION("Wondermedia WM8850 Pincontrol driver"); +MODULE_LICENSE("GPL v2"); +MODULE_DEVICE_TABLE(of, wmt_pinctrl_of_match); diff --git a/drivers/pinctrl/vt8500/pinctrl-wmt.c b/drivers/pinctrl/vt8500/pinctrl-wmt.c new file mode 100644 index 0000000..14400a7 --- /dev/null +++ b/drivers/pinctrl/vt8500/pinctrl-wmt.c @@ -0,0 +1,632 @@ +/* + * Pinctrl driver for the Wondermedia SoC's + * + * Copyright (c) 2013 Tony Prisk <linux@prisktech.co.nz> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include <linux/err.h> +#include <linux/gpio.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_irq.h> +#include <linux/pinctrl/consumer.h> +#include <linux/pinctrl/machine.h> +#include <linux/pinctrl/pinconf.h> +#include <linux/pinctrl/pinconf-generic.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/pinctrl/pinmux.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +#include "pinctrl-wmt.h" + +static inline void wmt_setbits(struct wmt_pinctrl_data *data, u32 reg, + u32 mask) +{ + u32 val; + + val = readl_relaxed(data->base + reg); + val |= mask; + writel_relaxed(val, data->base + reg); +} + +static inline void wmt_clearbits(struct wmt_pinctrl_data *data, u32 reg, + u32 mask) +{ + u32 val; + + val = readl_relaxed(data->base + reg); + val &= ~mask; + writel_relaxed(val, data->base + reg); +} + +enum wmt_func_sel { + WMT_FSEL_GPIO_IN = 0, + WMT_FSEL_GPIO_OUT = 1, + WMT_FSEL_ALT = 2, + WMT_FSEL_COUNT = 3, +}; + +static const char * const wmt_functions[WMT_FSEL_COUNT] = { + [WMT_FSEL_GPIO_IN] = "gpio_in", + [WMT_FSEL_GPIO_OUT] = "gpio_out", + [WMT_FSEL_ALT] = "alt", +}; + +static int wmt_pmx_get_functions_count(struct pinctrl_dev *pctldev) +{ + return WMT_FSEL_COUNT; +} + +static const char *wmt_pmx_get_function_name(struct pinctrl_dev *pctldev, + unsigned selector) +{ + return wmt_functions[selector]; +} + +static int wmt_pmx_get_function_groups(struct pinctrl_dev *pctldev, + unsigned selector, + const char * const **groups, + unsigned * const num_groups) +{ + struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev); + + /* every pin does every function */ + *groups = data->groups; + *num_groups = data->ngroups; + + return 0; +} + +static int wmt_set_pinmux(struct wmt_pinctrl_data *data, unsigned func, + unsigned pin) +{ + u32 bank = WMT_BANK_FROM_PIN(pin); + u32 bit = WMT_BIT_FROM_PIN(pin); + u32 reg_en = data->banks[bank].reg_en; + u32 reg_dir = data->banks[bank].reg_dir; + + if (reg_dir == NO_REG) { + dev_err(data->dev, "pin:%d no direction register defined\n", + pin); + return -EINVAL; + } + + /* + * If reg_en == NO_REG, we assume it is a dedicated GPIO and cannot be + * disabled (as on VT8500) and that no alternate function is available. + */ + switch (func) { + case WMT_FSEL_GPIO_IN: + if (reg_en != NO_REG) + wmt_setbits(data, reg_en, BIT(bit)); + wmt_clearbits(data, reg_dir, BIT(bit)); + break; + case WMT_FSEL_GPIO_OUT: + if (reg_en != NO_REG) + wmt_setbits(data, reg_en, BIT(bit)); + wmt_setbits(data, reg_dir, BIT(bit)); + break; + case WMT_FSEL_ALT: + if (reg_en == NO_REG) { + dev_err(data->dev, "pin:%d no alt function available\n", + pin); + return -EINVAL; + } + wmt_clearbits(data, reg_en, BIT(bit)); + } + + return 0; +} + +static int wmt_pmx_enable(struct pinctrl_dev *pctldev, + unsigned func_selector, + unsigned group_selector) +{ + struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev); + u32 pinnum = data->pins[group_selector].number; + + return wmt_set_pinmux(data, func_selector, pinnum); +} + +static void wmt_pmx_disable(struct pinctrl_dev *pctldev, + unsigned func_selector, + unsigned group_selector) +{ + struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev); + u32 pinnum = data->pins[group_selector].number; + + /* disable by setting GPIO_IN */ + wmt_set_pinmux(data, WMT_FSEL_GPIO_IN, pinnum); +} + +static void wmt_pmx_gpio_disable_free(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, + unsigned offset) +{ + struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev); + + /* disable by setting GPIO_IN */ + wmt_set_pinmux(data, WMT_FSEL_GPIO_IN, offset); +} + +static int wmt_pmx_gpio_set_direction(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, + unsigned offset, + bool input) +{ + struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev); + + wmt_set_pinmux(data, (input ? WMT_FSEL_GPIO_IN : WMT_FSEL_GPIO_OUT), + offset); + + return 0; +} + +static struct pinmux_ops wmt_pinmux_ops = { + .get_functions_count = wmt_pmx_get_functions_count, + .get_function_name = wmt_pmx_get_function_name, + .get_function_groups = wmt_pmx_get_function_groups, + .enable = wmt_pmx_enable, + .disable = wmt_pmx_disable, + .gpio_disable_free = wmt_pmx_gpio_disable_free, + .gpio_set_direction = wmt_pmx_gpio_set_direction, +}; + +static int wmt_get_groups_count(struct pinctrl_dev *pctldev) +{ + struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev); + + return data->ngroups; +} + +static const char *wmt_get_group_name(struct pinctrl_dev *pctldev, + unsigned selector) +{ + struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev); + + return data->groups[selector]; +} + +static int wmt_get_group_pins(struct pinctrl_dev *pctldev, + unsigned selector, + const unsigned **pins, + unsigned *num_pins) +{ + struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev); + + *pins = &data->pins[selector].number; + *num_pins = 1; + + return 0; +} + +static int wmt_pctl_find_group_by_pin(struct wmt_pinctrl_data *data, u32 pin) +{ + int i; + + for (i = 0; i < data->npins; i++) { + if (data->pins[i].number == pin) + return i; + } + + return -EINVAL; +} + +static int wmt_pctl_dt_node_to_map_func(struct wmt_pinctrl_data *data, + struct device_node *np, + u32 pin, u32 fnum, + struct pinctrl_map **maps) +{ + int group; + struct pinctrl_map *map = *maps; + + if (fnum >= ARRAY_SIZE(wmt_functions)) { + dev_err(data->dev, "invalid wm,function %d\n", fnum); + return -EINVAL; + } + + group = wmt_pctl_find_group_by_pin(data, pin); + if (group < 0) { + dev_err(data->dev, "unable to match pin %d to group\n", pin); + return group; + } + + map->type = PIN_MAP_TYPE_MUX_GROUP; + map->data.mux.group = data->groups[group]; + map->data.mux.function = wmt_functions[fnum]; + (*maps)++; + + return 0; +} + +static int wmt_pctl_dt_node_to_map_pull(struct wmt_pinctrl_data *data, + struct device_node *np, + u32 pin, u32 pull, + struct pinctrl_map **maps) +{ + int group; + unsigned long *configs; + struct pinctrl_map *map = *maps; + + if (pull > 2) { + dev_err(data->dev, "invalid wm,pull %d\n", pull); + return -EINVAL; + } + + group = wmt_pctl_find_group_by_pin(data, pin); + if (group < 0) { + dev_err(data->dev, "unable to match pin %d to group\n", pin); + return group; + } + + configs = kzalloc(sizeof(*configs), GFP_KERNEL); + if (!configs) + return -ENOMEM; + + configs[0] = pull; + + map->type = PIN_MAP_TYPE_CONFIGS_PIN; + map->data.configs.group_or_pin = data->groups[group]; + map->data.configs.configs = configs; + map->data.configs.num_configs = 1; + (*maps)++; + + return 0; +} + +static void wmt_pctl_dt_free_map(struct pinctrl_dev *pctldev, + struct pinctrl_map *maps, + unsigned num_maps) +{ + int i; + + for (i = 0; i < num_maps; i++) + if (maps[i].type == PIN_MAP_TYPE_CONFIGS_PIN) + kfree(maps[i].data.configs.configs); + + kfree(maps); +} + +static int wmt_pctl_dt_node_to_map(struct pinctrl_dev *pctldev, + struct device_node *np, + struct pinctrl_map **map, + unsigned *num_maps) +{ + struct pinctrl_map *maps, *cur_map; + struct property *pins, *funcs, *pulls; + u32 pin, func, pull; + int num_pins, num_funcs, num_pulls, maps_per_pin; + int i, err; + struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev); + + pins = of_find_property(np, "wm,pins", NULL); + if (!pins) { + dev_err(data->dev, "missing wmt,pins property\n"); + return -EINVAL; + } + + funcs = of_find_property(np, "wm,function", NULL); + pulls = of_find_property(np, "wm,pull", NULL); + + if (!funcs && !pulls) { + dev_err(data->dev, "neither wm,function nor wm,pull specified\n"); + return -EINVAL; + } + + /* + * The following lines calculate how many values are defined for each + * of the properties. + */ + num_pins = pins->length / sizeof(u32); + num_funcs = funcs ? (funcs->length / sizeof(u32)) : 0; + num_pulls = pulls ? (pulls->length / sizeof(u32)) : 0; + + if (num_funcs > 1 && num_funcs != num_pins) { + dev_err(data->dev, "wm,function must have 1 or %d entries\n", + num_pins); + return -EINVAL; + } + + if (num_pulls > 1 && num_pulls != num_pins) { + dev_err(data->dev, "wm,pull must have 1 or %d entries\n", + num_pins); + return -EINVAL; + } + + maps_per_pin = 0; + if (num_funcs) + maps_per_pin++; + if (num_pulls) + maps_per_pin++; + + cur_map = maps = kzalloc(num_pins * maps_per_pin * sizeof(*maps), + GFP_KERNEL); + if (!maps) + return -ENOMEM; + + for (i = 0; i < num_pins; i++) { + err = of_property_read_u32_index(np, "wm,pins", i, &pin); + if (err) + goto fail; + + if (pin >= (data->nbanks * 32)) { + dev_err(data->dev, "invalid wm,pins value\n"); + err = -EINVAL; + goto fail; + } + + if (num_funcs) { + err = of_property_read_u32_index(np, "wm,function", + (num_funcs > 1 ? i : 0), &func); + if (err) + goto fail; + + err = wmt_pctl_dt_node_to_map_func(data, np, pin, func, + &cur_map); + if (err) + goto fail; + } + + if (num_pulls) { + err = of_property_read_u32_index(np, "wm,pull", + (num_pulls > 1 ? i : 0), &pull); + if (err) + goto fail; + + err = wmt_pctl_dt_node_to_map_pull(data, np, pin, pull, + &cur_map); + if (err) + goto fail; + } + } + *map = maps; + *num_maps = num_pins * maps_per_pin; + return 0; + +/* + * The fail path removes any maps that have been allocated. The fail path is + * only called from code after maps has been kzalloc'd. It is also safe to + * pass 'num_pins * maps_per_pin' as the map count even though we probably + * failed before all the mappings were read as all maps are allocated at once, + * and configs are only allocated for .type = PIN_MAP_TYPE_CONFIGS_PIN - there + * is no failpath where a config can be allocated without .type being set. + */ +fail: + wmt_pctl_dt_free_map(pctldev, maps, num_pins * maps_per_pin); + return err; +} + +static struct pinctrl_ops wmt_pctl_ops = { + .get_groups_count = wmt_get_groups_count, + .get_group_name = wmt_get_group_name, + .get_group_pins = wmt_get_group_pins, + .dt_node_to_map = wmt_pctl_dt_node_to_map, + .dt_free_map = wmt_pctl_dt_free_map, +}; + +static int wmt_pinconf_get(struct pinctrl_dev *pctldev, unsigned pin, + unsigned long *config) +{ + return -ENOTSUPP; +} + +static int wmt_pinconf_set(struct pinctrl_dev *pctldev, unsigned pin, + unsigned long config) +{ + struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev); + enum pin_config_param param = pinconf_to_config_param(config); + u16 arg = pinconf_to_config_argument(config); + u32 bank = WMT_BANK_FROM_PIN(pin); + u32 bit = WMT_BIT_FROM_PIN(pin); + u32 reg_pull_en = data->banks[bank].reg_pull_en; + u32 reg_pull_cfg = data->banks[bank].reg_pull_cfg; + + if ((reg_pull_en == NO_REG) || (reg_pull_cfg == NO_REG)) { + dev_err(data->dev, "bias functions not supported on pin %d\n", + pin); + return -EINVAL; + } + + if ((param == PIN_CONFIG_BIAS_PULL_DOWN) || + (param == PIN_CONFIG_BIAS_PULL_UP)) { + if (arg == 0) + param = PIN_CONFIG_BIAS_DISABLE; + } + + switch (param) { + case PIN_CONFIG_BIAS_DISABLE: + wmt_clearbits(data, reg_pull_en, BIT(bit)); + break; + case PIN_CONFIG_BIAS_PULL_DOWN: + wmt_clearbits(data, reg_pull_cfg, BIT(bit)); + wmt_setbits(data, reg_pull_en, BIT(bit)); + break; + case PIN_CONFIG_BIAS_PULL_UP: + wmt_setbits(data, reg_pull_cfg, BIT(bit)); + wmt_setbits(data, reg_pull_en, BIT(bit)); + break; + default: + dev_err(data->dev, "unknown pinconf param\n"); + return -EINVAL; + } + + return 0; +} + +static struct pinconf_ops wmt_pinconf_ops = { + .pin_config_get = wmt_pinconf_get, + .pin_config_set = wmt_pinconf_set, +}; + +static struct pinctrl_desc wmt_desc = { + .owner = THIS_MODULE, + .name = "pinctrl-wmt", + .pctlops = &wmt_pctl_ops, + .pmxops = &wmt_pinmux_ops, + .confops = &wmt_pinconf_ops, +}; + +static int wmt_gpio_request(struct gpio_chip *chip, unsigned offset) +{ + return pinctrl_request_gpio(chip->base + offset); +} + +static void wmt_gpio_free(struct gpio_chip *chip, unsigned offset) +{ + pinctrl_free_gpio(chip->base + offset); +} + +static int wmt_gpio_get_direction(struct gpio_chip *chip, unsigned offset) +{ + struct wmt_pinctrl_data *data = dev_get_drvdata(chip->dev); + u32 bank = WMT_BANK_FROM_PIN(offset); + u32 bit = WMT_BIT_FROM_PIN(offset); + u32 reg_dir = data->banks[bank].reg_dir; + u32 val; + + val = readl_relaxed(data->base + reg_dir); + if (val & BIT(bit)) + return GPIOF_DIR_OUT; + else + return GPIOF_DIR_IN; +} + +static int wmt_gpio_direction_input(struct gpio_chip *chip, unsigned offset) +{ + return pinctrl_gpio_direction_input(chip->base + offset); +} + +static int wmt_gpio_direction_output(struct gpio_chip *chip, unsigned offset, + int value) +{ + return pinctrl_gpio_direction_output(chip->base + offset); +} + +static int wmt_gpio_get_value(struct gpio_chip *chip, unsigned offset) +{ + struct wmt_pinctrl_data *data = dev_get_drvdata(chip->dev); + u32 bank = WMT_BANK_FROM_PIN(offset); + u32 bit = WMT_BIT_FROM_PIN(offset); + u32 reg_data_in = data->banks[bank].reg_data_in; + + if (reg_data_in == NO_REG) { + dev_err(data->dev, "no data in register defined\n"); + return -EINVAL; + } + + return !!(readl_relaxed(data->base + reg_data_in) & BIT(bit)); +} + +static void wmt_gpio_set_value(struct gpio_chip *chip, unsigned offset, + int val) +{ + struct wmt_pinctrl_data *data = dev_get_drvdata(chip->dev); + u32 bank = WMT_BANK_FROM_PIN(offset); + u32 bit = WMT_BIT_FROM_PIN(offset); + u32 reg_data_out = data->banks[bank].reg_data_out; + + if (reg_data_out == NO_REG) { + dev_err(data->dev, "no data out register defined\n"); + return; + } + + if (val) + wmt_setbits(data, reg_data_out, BIT(bit)); + else + wmt_clearbits(data, reg_data_out, BIT(bit)); +} + +static struct gpio_chip wmt_gpio_chip = { + .label = "gpio-wmt", + .owner = THIS_MODULE, + .request = wmt_gpio_request, + .free = wmt_gpio_free, + .get_direction = wmt_gpio_get_direction, + .direction_input = wmt_gpio_direction_input, + .direction_output = wmt_gpio_direction_output, + .get = wmt_gpio_get_value, + .set = wmt_gpio_set_value, + .can_sleep = 0, +}; + +int wmt_pinctrl_probe(struct platform_device *pdev, + struct wmt_pinctrl_data *data) +{ + int err; + struct resource *res; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + data->base = devm_request_and_ioremap(&pdev->dev, res); + if (!data->base) { + dev_err(&pdev->dev, "failed to map memory resource\n"); + return -EBUSY; + } + + wmt_desc.pins = data->pins; + wmt_desc.npins = data->npins; + + data->gpio_chip = wmt_gpio_chip; + data->gpio_chip.dev = &pdev->dev; + data->gpio_chip.of_node = pdev->dev.of_node; + data->gpio_chip.ngpio = data->nbanks * 32; + + platform_set_drvdata(pdev, data); + + data->dev = &pdev->dev; + + data->pctl_dev = pinctrl_register(&wmt_desc, &pdev->dev, data); + if (IS_ERR(data->pctl_dev)) { + dev_err(&pdev->dev, "Failed to register pinctrl\n"); + return -EINVAL; + } + + err = gpiochip_add(&data->gpio_chip); + if (err) { + dev_err(&pdev->dev, "could not add GPIO chip\n"); + goto fail_gpio; + } + + err = gpiochip_add_pin_range(&data->gpio_chip, dev_name(data->dev), + 0, 0, data->nbanks * 32); + if (err) + goto fail_range; + + dev_info(&pdev->dev, "Pin controller initialized\n"); + + return 0; + +fail_range: + err = gpiochip_remove(&data->gpio_chip); + if (err) + dev_err(&pdev->dev, "failed to remove gpio chip\n"); +fail_gpio: + pinctrl_unregister(data->pctl_dev); + return err; +} + +int wmt_pinctrl_remove(struct platform_device *pdev) +{ + struct wmt_pinctrl_data *data = platform_get_drvdata(pdev); + int err; + + err = gpiochip_remove(&data->gpio_chip); + if (err) + dev_err(&pdev->dev, "failed to remove gpio chip\n"); + + pinctrl_unregister(data->pctl_dev); + + return 0; +} diff --git a/drivers/pinctrl/vt8500/pinctrl-wmt.h b/drivers/pinctrl/vt8500/pinctrl-wmt.h new file mode 100644 index 0000000..41f5f2d --- /dev/null +++ b/drivers/pinctrl/vt8500/pinctrl-wmt.h @@ -0,0 +1,79 @@ +/* + * Pinctrl driver for the Wondermedia SoC's + * + * Copyright (c) 2013 Tony Prisk <linux@prisktech.co.nz> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include <linux/gpio.h> + +/* VT8500 has no enable register in the extgpio bank. */ +#define NO_REG 0xFFFF + +#define WMT_PINCTRL_BANK(__en, __dir, __dout, __din, __pen, __pcfg) \ +{ \ + .reg_en = __en, \ + .reg_dir = __dir, \ + .reg_data_out = __dout, \ + .reg_data_in = __din, \ + .reg_pull_en = __pen, \ + .reg_pull_cfg = __pcfg, \ +} + +/* Encode/decode the bank/bit pairs into a pin value */ +#define WMT_PIN(__bank, __offset) ((__bank << 5) | __offset) +#define WMT_BANK_FROM_PIN(__pin) (__pin >> 5) +#define WMT_BIT_FROM_PIN(__pin) (__pin & 0x1f) + +#define WMT_GROUP(__name, __data) \ +{ \ + .name = __name, \ + .pins = __data, \ + .npins = ARRAY_SIZE(__data), \ +} + +struct wmt_pinctrl_bank_registers { + u32 reg_en; + u32 reg_dir; + u32 reg_data_out; + u32 reg_data_in; + + u32 reg_pull_en; + u32 reg_pull_cfg; +}; + +struct wmt_pinctrl_group { + const char *name; + const unsigned int *pins; + const unsigned npins; +}; + +struct wmt_pinctrl_data { + struct device *dev; + struct pinctrl_dev *pctl_dev; + + /* must be initialized before calling wmt_pinctrl_probe */ + void __iomem *base; + const struct wmt_pinctrl_bank_registers *banks; + const struct pinctrl_pin_desc *pins; + const char * const *groups; + + u32 nbanks; + u32 npins; + u32 ngroups; + + struct gpio_chip gpio_chip; + struct pinctrl_gpio_range gpio_range; +}; + +int wmt_pinctrl_probe(struct platform_device *pdev, + struct wmt_pinctrl_data *data); +int wmt_pinctrl_remove(struct platform_device *pdev); diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c index 025428e..c1a2914 100644 --- a/drivers/video/atmel_lcdfb.c +++ b/drivers/video/atmel_lcdfb.c @@ -34,6 +34,77 @@ #define ATMEL_LCDC_DMA_BURST_LEN 8 /* words */ #define ATMEL_LCDC_FIFO_SIZE 512 /* words */ +struct atmel_lcdfb_config { + bool have_alt_pixclock; + bool have_hozval; + bool have_intensity_bit; +}; + +static struct atmel_lcdfb_config at91sam9261_config = { + .have_hozval = true, + .have_intensity_bit = true, +}; + +static struct atmel_lcdfb_config at91sam9263_config = { + .have_intensity_bit = true, +}; + +static struct atmel_lcdfb_config at91sam9g10_config = { + .have_hozval = true, +}; + +static struct atmel_lcdfb_config at91sam9g45_config = { + .have_alt_pixclock = true, +}; + +static struct atmel_lcdfb_config at91sam9g45es_config = { +}; + +static struct atmel_lcdfb_config at91sam9rl_config = { + .have_intensity_bit = true, +}; + +static struct atmel_lcdfb_config at32ap_config = { + .have_hozval = true, +}; + +static const struct platform_device_id atmel_lcdfb_devtypes[] = { + { + .name = "at91sam9261-lcdfb", + .driver_data = (unsigned long)&at91sam9261_config, + }, { + .name = "at91sam9263-lcdfb", + .driver_data = (unsigned long)&at91sam9263_config, + }, { + .name = "at91sam9g10-lcdfb", + .driver_data = (unsigned long)&at91sam9g10_config, + }, { + .name = "at91sam9g45-lcdfb", + .driver_data = (unsigned long)&at91sam9g45_config, + }, { + .name = "at91sam9g45es-lcdfb", + .driver_data = (unsigned long)&at91sam9g45es_config, + }, { + .name = "at91sam9rl-lcdfb", + .driver_data = (unsigned long)&at91sam9rl_config, + }, { + .name = "at32ap-lcdfb", + .driver_data = (unsigned long)&at32ap_config, + }, { + /* terminator */ + } +}; + +static struct atmel_lcdfb_config * +atmel_lcdfb_get_config(struct platform_device *pdev) +{ + unsigned long data; + + data = platform_get_device_id(pdev)->driver_data; + + return (struct atmel_lcdfb_config *)data; +} + #if defined(CONFIG_ARCH_AT91) #define ATMEL_LCDFB_FBINFO_DEFAULT (FBINFO_DEFAULT \ | FBINFO_PARTIAL_PAN_OK \ @@ -193,14 +264,16 @@ static struct fb_fix_screeninfo atmel_lcdfb_fix __initdata = { .accel = FB_ACCEL_NONE, }; -static unsigned long compute_hozval(unsigned long xres, unsigned long lcdcon2) +static unsigned long compute_hozval(struct atmel_lcdfb_info *sinfo, + unsigned long xres) { + unsigned long lcdcon2; unsigned long value; - if (!(cpu_is_at91sam9261() || cpu_is_at91sam9g10() - || cpu_is_at32ap7000())) + if (!sinfo->config->have_hozval) return xres; + lcdcon2 = lcdc_readl(sinfo, ATMEL_LCDC_LCDCON2); value = xres; if ((lcdcon2 & ATMEL_LCDC_DISTYPE) != ATMEL_LCDC_DISTYPE_TFT) { /* STN display */ @@ -423,7 +496,7 @@ static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var, break; case 16: /* Older SOCs use IBGR:555 rather than BGR:565. */ - if (sinfo->have_intensity_bit) + if (sinfo->config->have_intensity_bit) var->green.length = 5; else var->green.length = 6; @@ -531,7 +604,7 @@ static int atmel_lcdfb_set_par(struct fb_info *info) /* Now, the LCDC core... */ /* Set pixel clock */ - if (cpu_is_at91sam9g45() && !cpu_is_at91sam9g45es()) + if (sinfo->config->have_alt_pixclock) pix_factor = 1; clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000; @@ -591,8 +664,7 @@ static int atmel_lcdfb_set_par(struct fb_info *info) lcdc_writel(sinfo, ATMEL_LCDC_TIM2, value); /* Horizontal value (aka line size) */ - hozval_linesz = compute_hozval(info->var.xres, - lcdc_readl(sinfo, ATMEL_LCDC_LCDCON2)); + hozval_linesz = compute_hozval(sinfo, info->var.xres); /* Display size */ value = (hozval_linesz - 1) << ATMEL_LCDC_HOZVAL_OFFSET; @@ -684,7 +756,7 @@ static int atmel_lcdfb_setcolreg(unsigned int regno, unsigned int red, case FB_VISUAL_PSEUDOCOLOR: if (regno < 256) { - if (sinfo->have_intensity_bit) { + if (sinfo->config->have_intensity_bit) { /* old style I+BGR:555 */ val = ((red >> 11) & 0x001f); val |= ((green >> 6) & 0x03e0); @@ -821,15 +893,13 @@ static int __init atmel_lcdfb_init_fbinfo(struct atmel_lcdfb_info *sinfo) static void atmel_lcdfb_start_clock(struct atmel_lcdfb_info *sinfo) { - if (sinfo->bus_clk) - clk_enable(sinfo->bus_clk); + clk_enable(sinfo->bus_clk); clk_enable(sinfo->lcdc_clk); } static void atmel_lcdfb_stop_clock(struct atmel_lcdfb_info *sinfo) { - if (sinfo->bus_clk) - clk_disable(sinfo->bus_clk); + clk_disable(sinfo->bus_clk); clk_disable(sinfo->lcdc_clk); } @@ -874,10 +944,9 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev) } sinfo->info = info; sinfo->pdev = pdev; - if (cpu_is_at91sam9261() || cpu_is_at91sam9263() || - cpu_is_at91sam9rl()) { - sinfo->have_intensity_bit = true; - } + sinfo->config = atmel_lcdfb_get_config(pdev); + if (!sinfo->config) + goto free_info; strcpy(info->fix.id, sinfo->pdev->name); info->flags = ATMEL_LCDFB_FBINFO_DEFAULT; @@ -888,13 +957,10 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev) info->fix = atmel_lcdfb_fix; /* Enable LCDC Clocks */ - if (cpu_is_at91sam9261() || cpu_is_at91sam9g10() - || cpu_is_at32ap7000()) { - sinfo->bus_clk = clk_get(dev, "hck1"); - if (IS_ERR(sinfo->bus_clk)) { - ret = PTR_ERR(sinfo->bus_clk); - goto free_info; - } + sinfo->bus_clk = clk_get(dev, "hclk"); + if (IS_ERR(sinfo->bus_clk)) { + ret = PTR_ERR(sinfo->bus_clk); + goto free_info; } sinfo->lcdc_clk = clk_get(dev, "lcdc_clk"); if (IS_ERR(sinfo->lcdc_clk)) { @@ -1055,8 +1121,7 @@ stop_clk: atmel_lcdfb_stop_clock(sinfo); clk_put(sinfo->lcdc_clk); put_bus_clk: - if (sinfo->bus_clk) - clk_put(sinfo->bus_clk); + clk_put(sinfo->bus_clk); free_info: framebuffer_release(info); out: @@ -1081,8 +1146,7 @@ static int __exit atmel_lcdfb_remove(struct platform_device *pdev) unregister_framebuffer(info); atmel_lcdfb_stop_clock(sinfo); clk_put(sinfo->lcdc_clk); - if (sinfo->bus_clk) - clk_put(sinfo->bus_clk); + clk_put(sinfo->bus_clk); fb_dealloc_cmap(&info->cmap); free_irq(sinfo->irq_base, info); iounmap(sinfo->mmio); @@ -1151,7 +1215,7 @@ static struct platform_driver atmel_lcdfb_driver = { .remove = __exit_p(atmel_lcdfb_remove), .suspend = atmel_lcdfb_suspend, .resume = atmel_lcdfb_resume, - + .id_table = atmel_lcdfb_devtypes, .driver = { .name = "atmel_lcdfb", .owner = THIS_MODULE, diff --git a/include/linux/clk-private.h b/include/linux/clk-private.h index 9c7f580..dd7adff 100644 --- a/include/linux/clk-private.h +++ b/include/linux/clk-private.h @@ -152,7 +152,7 @@ struct clk { }, \ .reg = _reg, \ .shift = _shift, \ - .width = _width, \ + .mask = BIT(_width) - 1, \ .flags = _mux_flags, \ .lock = _lock, \ }; \ diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index 7f197d7..1f03528 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -45,6 +45,14 @@ struct clk_hw; * undo any work done in the @prepare callback. Called with * prepare_lock held. * + * @is_prepared: Queries the hardware to determine if the clock is prepared. + * This function is allowed to sleep. Optional, if this op is not + * set then the prepare count will be used. + * + * @unprepare_unused: Unprepare the clock atomically. Only called from + * clk_disable_unused for prepare clocks with special needs. + * Called with prepare mutex held. This function may sleep. + * * @enable: Enable the clock atomically. This must not return until the * clock is generating a valid clock signal, usable by consumer * devices. Called with enable_lock held. This function must not @@ -108,6 +116,8 @@ struct clk_hw; struct clk_ops { int (*prepare)(struct clk_hw *hw); void (*unprepare)(struct clk_hw *hw); + int (*is_prepared)(struct clk_hw *hw); + void (*unprepare_unused)(struct clk_hw *hw); int (*enable)(struct clk_hw *hw); void (*disable)(struct clk_hw *hw); int (*is_enabled)(struct clk_hw *hw); @@ -287,8 +297,9 @@ struct clk *clk_register_divider_table(struct device *dev, const char *name, struct clk_mux { struct clk_hw hw; void __iomem *reg; + u32 *table; + u32 mask; u8 shift; - u8 width; u8 flags; spinlock_t *lock; }; @@ -297,11 +308,17 @@ struct clk_mux { #define CLK_MUX_INDEX_BIT BIT(1) extern const struct clk_ops clk_mux_ops; + struct clk *clk_register_mux(struct device *dev, const char *name, const char **parent_names, u8 num_parents, unsigned long flags, void __iomem *reg, u8 shift, u8 width, u8 clk_mux_flags, spinlock_t *lock); +struct clk *clk_register_mux_table(struct device *dev, const char *name, + const char **parent_names, u8 num_parents, unsigned long flags, + void __iomem *reg, u8 shift, u32 mask, + u8 clk_mux_flags, u32 *table, spinlock_t *lock); + /** * struct clk_fixed_factor - fixed multiplier and divider clock * @@ -325,6 +342,37 @@ struct clk *clk_register_fixed_factor(struct device *dev, const char *name, const char *parent_name, unsigned long flags, unsigned int mult, unsigned int div); +/*** + * struct clk_composite - aggregate clock of mux, divider and gate clocks + * + * @hw: handle between common and hardware-specific interfaces + * @mux_hw: handle between composite and hardware-specifix mux clock + * @div_hw: handle between composite and hardware-specifix divider clock + * @gate_hw: handle between composite and hardware-specifix gate clock + * @mux_ops: clock ops for mux + * @div_ops: clock ops for divider + * @gate_ops: clock ops for gate + */ +struct clk_composite { + struct clk_hw hw; + struct clk_ops ops; + + struct clk_hw *mux_hw; + struct clk_hw *div_hw; + struct clk_hw *gate_hw; + + const struct clk_ops *mux_ops; + const struct clk_ops *div_ops; + const struct clk_ops *gate_ops; +}; + +struct clk *clk_register_composite(struct device *dev, const char *name, + const char **parent_names, int num_parents, + struct clk_hw *mux_hw, const struct clk_ops *mux_ops, + struct clk_hw *div_hw, const struct clk_ops *div_ops, + struct clk_hw *gate_hw, const struct clk_ops *gate_ops, + unsigned long flags); + /** * clk_register - allocate a new clock, register it and return an opaque cookie * @dev: device that is registering this clock @@ -351,6 +399,7 @@ unsigned int __clk_get_enable_count(struct clk *clk); unsigned int __clk_get_prepare_count(struct clk *clk); unsigned long __clk_get_rate(struct clk *clk); unsigned long __clk_get_flags(struct clk *clk); +bool __clk_is_prepared(struct clk *clk); bool __clk_is_enabled(struct clk *clk); struct clk *__clk_lookup(const char *name); diff --git a/include/linux/clk/sunxi.h b/include/linux/clk/sunxi.h new file mode 100644 index 0000000..e074fdd --- /dev/null +++ b/include/linux/clk/sunxi.h @@ -0,0 +1,22 @@ +/* + * Copyright 2012 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __LINUX_CLK_SUNXI_H_ +#define __LINUX_CLK_SUNXI_H_ + +void __init sunxi_init_clocks(void); + +#endif diff --git a/include/linux/clk/tegra.h b/include/linux/clk/tegra.h index 404d6f9..642789b 100644 --- a/include/linux/clk/tegra.h +++ b/include/linux/clk/tegra.h @@ -123,5 +123,6 @@ static inline void tegra_cpu_clock_resume(void) void tegra_periph_reset_deassert(struct clk *c); void tegra_periph_reset_assert(struct clk *c); void tegra_clocks_init(void); +void tegra_clocks_apply_init_table(void); #endif /* __LINUX_CLK_TEGRA_H_ */ diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h index 27cfda4..192d6d1 100644 --- a/include/linux/clocksource.h +++ b/include/linux/clocksource.h @@ -332,15 +332,23 @@ extern int clocksource_mmio_init(void __iomem *, const char *, extern int clocksource_i8253_init(void); +struct device_node; +typedef void(*clocksource_of_init_fn)(struct device_node *); #ifdef CONFIG_CLKSRC_OF extern void clocksource_of_init(void); #define CLOCKSOURCE_OF_DECLARE(name, compat, fn) \ static const struct of_device_id __clksrc_of_table_##name \ __used __section(__clksrc_of_table) \ - = { .compatible = compat, .data = fn }; + = { .compatible = compat, \ + .data = (fn == (clocksource_of_init_fn)NULL) ? fn : fn } #else -#define CLOCKSOURCE_OF_DECLARE(name, compat, fn) +static inline void clocksource_of_init(void) {} +#define CLOCKSOURCE_OF_DECLARE(name, compat, fn) \ + static const struct of_device_id __clksrc_of_table_##name \ + __attribute__((unused)) \ + = { .compatible = compat, \ + .data = (fn == (clocksource_of_init_fn)NULL) ? fn : fn } #endif #endif /* _LINUX_CLOCKSOURCE_H */ diff --git a/include/linux/of.h b/include/linux/of.h index a0f1292..c0747a4 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -235,6 +235,9 @@ extern struct device_node *of_find_node_with_property( extern struct property *of_find_property(const struct device_node *np, const char *name, int *lenp); +extern int of_property_read_u32_index(const struct device_node *np, + const char *propname, + u32 index, u32 *out_value); extern int of_property_read_u8_array(const struct device_node *np, const char *propname, u8 *out_values, size_t sz); extern int of_property_read_u16_array(const struct device_node *np, @@ -394,6 +397,12 @@ static inline struct device_node *of_find_compatible_node( return NULL; } +static inline int of_property_read_u32_index(const struct device_node *np, + const char *propname, u32 index, u32 *out_value) +{ + return -ENOSYS; +} + static inline int of_property_read_u8_array(const struct device_node *np, const char *propname, u8 *out_values, size_t sz) { diff --git a/include/linux/platform_data/irq-renesas-intc-irqpin.h b/include/linux/platform_data/irq-renesas-intc-irqpin.h new file mode 100644 index 0000000..e4cb911 --- /dev/null +++ b/include/linux/platform_data/irq-renesas-intc-irqpin.h @@ -0,0 +1,29 @@ +/* + * Renesas INTC External IRQ Pin Driver + * + * Copyright (C) 2013 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __IRQ_RENESAS_INTC_IRQPIN_H__ +#define __IRQ_RENESAS_INTC_IRQPIN_H__ + +struct renesas_intc_irqpin_config { + unsigned int sense_bitfield_width; + unsigned int irq_base; + bool control_parent; +}; + +#endif /* __IRQ_RENESAS_INTC_IRQPIN_H__ */ diff --git a/include/linux/platform_data/irq-renesas-irqc.h b/include/linux/platform_data/irq-renesas-irqc.h new file mode 100644 index 0000000..3ae17b3 --- /dev/null +++ b/include/linux/platform_data/irq-renesas-irqc.h @@ -0,0 +1,27 @@ +/* + * Renesas IRQC Driver + * + * Copyright (C) 2013 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __IRQ_RENESAS_IRQC_H__ +#define __IRQ_RENESAS_IRQC_H__ + +struct renesas_irqc_config { + unsigned int irq_base; +}; + +#endif /* __IRQ_RENESAS_IRQC_H__ */ diff --git a/include/linux/usb/nop-usb-xceiv.h b/include/linux/usb/nop-usb-xceiv.h index 28884c7..148d351 100644 --- a/include/linux/usb/nop-usb-xceiv.h +++ b/include/linux/usb/nop-usb-xceiv.h @@ -5,6 +5,11 @@ struct nop_usb_xceiv_platform_data { enum usb_phy_type type; + unsigned long clk_rate; + + /* if set fails with -EPROBE_DEFER if can't get regulator */ + unsigned int needs_vcc:1; + unsigned int needs_reset:1; }; #if defined(CONFIG_NOP_USB_XCEIV) || (defined(CONFIG_NOP_USB_XCEIV_MODULE) && defined(MODULE)) diff --git a/include/video/atmel_lcdc.h b/include/video/atmel_lcdc.h index 8deb226..0f5a2fc 100644 --- a/include/video/atmel_lcdc.h +++ b/include/video/atmel_lcdc.h @@ -31,6 +31,7 @@ #define ATMEL_LCDC_WIRING_BGR 0 #define ATMEL_LCDC_WIRING_RGB 1 +struct atmel_lcdfb_config; /* LCD Controller info data structure, stored in device platform_data */ struct atmel_lcdfb_info { @@ -61,7 +62,8 @@ struct atmel_lcdfb_info { void (*atmel_lcdfb_power_control)(int on); struct fb_monspecs *default_monspecs; u32 pseudo_palette[16]; - bool have_intensity_bit; + + struct atmel_lcdfb_config *config; }; #define ATMEL_LCDC_DMABADDR1 0x00 |
