summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--tools/testing/ktest/examples/include/patchcheck.conf37
-rwxr-xr-xtools/testing/ktest/ktest.pl110
-rw-r--r--tools/testing/ktest/sample.conf44
3 files changed, 185 insertions, 6 deletions
diff --git a/tools/testing/ktest/examples/include/patchcheck.conf b/tools/testing/ktest/examples/include/patchcheck.conf
index 339d3e1..0eb0a5a 100644
--- a/tools/testing/ktest/examples/include/patchcheck.conf
+++ b/tools/testing/ktest/examples/include/patchcheck.conf
@@ -14,6 +14,16 @@
PATCH_START := HEAD~3
PATCH_END := HEAD
+# Use the oldconfig if build_type wasn't defined
+DEFAULTS IF NOT DEFINED BUILD_TYPE
+DO_BUILD_TYPE := oldconfig
+
+DEFAULTS ELSE
+DO_BUILD_TYPE := ${BUILD_TYPE}
+
+DEFAULTS
+
+
# Change PATCH_CHECKOUT to be the branch you want to test. The test will
# do a git checkout of this branch before starting. Obviously both
# PATCH_START and PATCH_END must be in this branch (and PATCH_START must
@@ -43,6 +53,31 @@ PATCH_TEST_TYPE := boot
# (space delimited)
#IGNORE_WARNINGS = 39eaf7ef884dcc44f7ff1bac803ca2a1dcf43544 6edb2a8a385f0cdef51dae37ff23e74d76d8a6ce
+# Instead of just checking for warnings to files that are changed
+# it can be advantageous to check for any new warnings. If a
+# header file is changed, it could cause a warning in a file not
+# touched by the commit. To detect these kinds of warnings, you
+# can use the WARNINGS_FILE option.
+#
+# If the variable CREATE_WARNINGS_FILE is set, this config will
+# enable the WARNINGS_FILE during the patchcheck test. Also,
+# before running the patchcheck test, it will create the
+# warnings file.
+#
+DEFAULTS IF DEFINED CREATE_WARNINGS_FILE
+WARNINGS_FILE = ${OUTPUT_DIR}/warnings_file
+
+TEST_START IF DEFINED CREATE_WARNINGS_FILE
+# WARNINGS_FILE is already set by the DEFAULTS above
+TEST_TYPE = make_warnings_file
+# Checkout the commit before the patches to test,
+# and record all the warnings that exist before the patches
+# to test are added
+CHECKOUT = ${PATCHCHECK_START}~1
+# Force a full build
+BUILD_NOCLEAN = 0
+BUILD_TYPE = ${DO_BUILD_TYPE}
+
# If you are running a multi test, and the test failed on the first
# test but on, say the 5th patch. If you want to restart on the
# fifth patch, set PATCH_START1. This will make the first test start
@@ -61,6 +96,7 @@ PATCHCHECK_TYPE = ${PATCH_TEST_TYPE}
PATCHCHECK_START = ${PATCH_START1}
PATCHCHECK_END = ${PATCH_END}
CHECKOUT = ${PATCH_CHECKOUT}
+BUILD_TYPE = ${DO_BUILD_TYPE}
TEST_START IF ${TEST} == patchcheck && ${MULTI}
TEST_TYPE = patchcheck
@@ -72,3 +108,4 @@ PATCHCHECK_END = ${PATCH_END}
CHECKOUT = ${PATCH_CHECKOUT}
# Use multi to test different compilers?
MAKE_CMD = CC=gcc-4.5.1 make
+BUILD_TYPE = ${DO_BUILD_TYPE}
diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl
index 3d19ee4..3fd768e 100755
--- a/tools/testing/ktest/ktest.pl
+++ b/tools/testing/ktest/ktest.pl
@@ -126,6 +126,7 @@ my $start_minconfig_defined;
my $output_minconfig;
my $minconfig_type;
my $use_output_minconfig;
+my $warnings_file;
my $ignore_config;
my $ignore_errors;
my $addconfig;
@@ -193,6 +194,9 @@ my $patchcheck_end;
# which would require more options.
my $buildonly = 1;
+# tell build not to worry about warnings, even when WARNINGS_FILE is set
+my $warnings_ok = 0;
+
# set when creating a new config
my $newconfig = 0;
@@ -235,6 +239,7 @@ my %option_map = (
"START_MIN_CONFIG" => \$start_minconfig,
"MIN_CONFIG_TYPE" => \$minconfig_type,
"USE_OUTPUT_MIN_CONFIG" => \$use_output_minconfig,
+ "WARNINGS_FILE" => \$warnings_file,
"IGNORE_CONFIG" => \$ignore_config,
"TEST" => \$run_test,
"ADD_CONFIG" => \$addconfig,
@@ -1924,7 +1929,60 @@ sub start_monitor_and_boot {
return monitor;
}
+my $check_build_re = ".*:.*(warning|error|Error):.*";
+my $utf8_quote = "\\x{e2}\\x{80}(\\x{98}|\\x{99})";
+
+# Read buildlog and check against warnings file for any
+# new warnings.
+#
+# Returns 1 if OK
+# 0 otherwise
sub check_buildlog {
+ return 1 if (!defined $warnings_file);
+
+ my %warnings_list;
+
+ # Failed builds should not reboot the target
+ my $save_no_reboot = $no_reboot;
+ $no_reboot = 1;
+
+ if (-f $warnings_file) {
+ open(IN, $warnings_file) or
+ dodie "Error opening $warnings_file";
+
+ while (<IN>) {
+ if (/$check_build_re/) {
+ chomp;
+ $warnings_list{$_} = 1;
+ }
+ }
+ close(IN);
+ }
+
+ # If warnings file didn't exist, and WARNINGS_FILE exist,
+ # then we fail on any warning!
+
+ open(IN, $buildlog) or dodie "Can't open $buildlog";
+ while (<IN>) {
+ if (/$check_build_re/) {
+
+ # Some compilers use UTF-8 extended for quotes
+ # for distcc heterogeneous systems, this causes issues
+ s/$utf8_quote/'/g;
+
+ chomp;
+ if (!defined $warnings_list{$_}) {
+ fail "New warning found (not in $warnings_file)\n$_\n";
+ $no_reboot = $save_no_reboot;
+ return 0;
+ }
+ }
+ }
+ $no_reboot = $save_no_reboot;
+ close(IN);
+}
+
+sub check_patch_buildlog {
my ($patch) = @_;
my @files = `git show $patch | diffstat -l`;
@@ -3080,11 +3138,13 @@ sub patchcheck {
build "oldconfig" or return 0;
}
-
- if (!defined($ignored_warnings{$sha1})) {
- check_buildlog $sha1 or return 0;
+ # No need to do per patch checking if warnings file exists
+ if (!defined($warnings_file) && !defined($ignored_warnings{$sha1})) {
+ check_patch_buildlog $sha1 or return 0;
}
+ check_buildlog or return 0;
+
next if ($type eq "build");
my $failed = 0;
@@ -3642,6 +3702,39 @@ sub make_min_config {
return 1;
}
+sub make_warnings_file {
+ my ($i) = @_;
+
+ if (!defined($warnings_file)) {
+ dodie "Must define WARNINGS_FILE for make_warnings_file test";
+ }
+
+ if ($build_type eq "nobuild") {
+ dodie "BUILD_TYPE can not be 'nobuild' for make_warnings_file test";
+ }
+
+ build $build_type or dodie "Failed to build";
+
+ open(OUT, ">$warnings_file") or dodie "Can't create $warnings_file";
+
+ open(IN, $buildlog) or dodie "Can't open $buildlog";
+ while (<IN>) {
+
+ # Some compilers use UTF-8 extended for quotes
+ # for distcc heterogeneous systems, this causes issues
+ s/$utf8_quote/'/g;
+
+ if (/$check_build_re/) {
+ print OUT;
+ }
+ }
+ close(IN);
+
+ close(OUT);
+
+ success $i;
+}
+
$#ARGV < 1 or die "ktest.pl version: $VERSION\n usage: ktest.pl config-file\n";
if ($#ARGV == 0) {
@@ -3843,9 +3936,9 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
$run_type = $bisect_type;
} elsif ($test_type eq "config_bisect") {
$run_type = $config_bisect_type;
- }
-
- if ($test_type eq "make_min_config") {
+ } elsif ($test_type eq "make_min_config") {
+ $run_type = "";
+ } elsif ($test_type eq "make_warnings_file") {
$run_type = "";
}
@@ -3902,10 +3995,15 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
} elsif ($test_type eq "make_min_config") {
make_min_config $i;
next;
+ } elsif ($test_type eq "make_warnings_file") {
+ $no_reboot = 1;
+ make_warnings_file $i;
+ next;
}
if ($build_type ne "nobuild") {
build $build_type or next;
+ check_buildlog or next;
}
if ($test_type eq "install") {
diff --git a/tools/testing/ktest/sample.conf b/tools/testing/ktest/sample.conf
index 4012e93..0a290fb 100644
--- a/tools/testing/ktest/sample.conf
+++ b/tools/testing/ktest/sample.conf
@@ -793,6 +793,20 @@
# Example for a virtual guest call "Guest".
#POWER_OFF = virsh destroy Guest
+# To have the build fail on "new" warnings, create a file that
+# contains a list of all known warnings (they must match exactly
+# to the line with 'warning:', 'error:' or 'Error:'. If the option
+# WARNINGS_FILE is set, then that file will be read, and if the
+# build detects a warning, it will examine this file and if the
+# warning does not exist in it, it will fail the build.
+#
+# Note, if this option is defined to a file that does not exist
+# then any warning will fail the build.
+# (see make_warnings_file below)
+#
+# (optional, default undefined)
+#WARNINGS_FILE = ${OUTPUT_DIR}/warnings_file
+
# The way to execute a command on the target
# (default ssh $SSH_USER@$MACHINE $SSH_COMMAND";)
# The variables SSH_USER, MACHINE and SSH_COMMAND are defined
@@ -1222,3 +1236,33 @@
# MIN_CONFIG_TYPE = test
# TEST = ssh ${USER}@${MACHINE} echo hi
#
+#
+#
+#
+# For TEST_TYPE = make_warnings_file
+#
+# If you want the build to fail when a new warning is discovered
+# you set the WARNINGS_FILE to point to a file of known warnings.
+#
+# The test "make_warnings_file" will let you create a new warnings
+# file before you run other tests, like patchcheck.
+#
+# What this test does is to run just a build, you still need to
+# specify BUILD_TYPE to tell the test what type of config to use.
+# A BUILD_TYPE of nobuild will fail this test.
+#
+# The test will do the build and scan for all warnings. Any warning
+# it discovers will be saved in the WARNINGS_FILE (required) option.
+#
+# It is recommended (but not necessary) to make sure BUILD_NOCLEAN is
+# off, so that a full build is done (make mrproper is performed).
+# That way, all warnings will be captured.
+#
+# Example:
+#
+# TEST_TYPE = make_warnings_file
+# WARNINGS_FILE = ${OUTPUT_DIR}
+# BUILD_TYPE = useconfig:oldconfig
+# CHECKOUT = v3.8
+# BUILD_NOCLEAN = 0
+#
OpenPOWER on IntegriCloud