diff options
| -rw-r--r-- | drivers/i2c/busses/i2c-pasemi.c | 7 | ||||
| -rw-r--r-- | drivers/i2c/chips/eeprom.c | 37 | ||||
| -rw-r--r-- | drivers/i2c/i2c-core.c | 3 | ||||
| -rw-r--r-- | drivers/i2c/i2c-dev.c | 86 | ||||
| -rw-r--r-- | include/linux/i2c.h | 5 |
5 files changed, 115 insertions, 23 deletions
diff --git a/drivers/i2c/busses/i2c-pasemi.c b/drivers/i2c/busses/i2c-pasemi.c index 58e3271..ca18e0b 100644 --- a/drivers/i2c/busses/i2c-pasemi.c +++ b/drivers/i2c/busses/i2c-pasemi.c @@ -51,6 +51,7 @@ struct pasemi_smbus { #define MRXFIFO_DATA_M 0x000000ff #define SMSTA_XEN 0x08000000 +#define SMSTA_MTN 0x00200000 #define CTL_MRR 0x00000400 #define CTL_MTR 0x00000200 @@ -98,6 +99,10 @@ static unsigned int pasemi_smb_waitready(struct pasemi_smbus *smbus) status = reg_read(smbus, REG_SMSTA); } + /* Got NACK? */ + if (status & SMSTA_MTN) + return -ENXIO; + if (timeout < 0) { dev_warn(&smbus->dev->dev, "Timeout, status 0x%08x\n", status); reg_write(smbus, REG_SMSTA, status); @@ -364,7 +369,7 @@ static int __devinit pasemi_smb_probe(struct pci_dev *dev, smbus->adapter.algo = &smbus_algorithm; smbus->adapter.algo_data = smbus; - /* set up the driverfs linkage to our parent device */ + /* set up the sysfs linkage to our parent device */ smbus->adapter.dev.parent = &dev->dev; reg_write(smbus, REG_CTL, (CTL_MTR | CTL_MRR | diff --git a/drivers/i2c/chips/eeprom.c b/drivers/i2c/chips/eeprom.c index d3da1fb..1a7eeeb 100644 --- a/drivers/i2c/chips/eeprom.c +++ b/drivers/i2c/chips/eeprom.c @@ -128,13 +128,20 @@ static ssize_t eeprom_read(struct kobject *kobj, struct bin_attribute *bin_attr, for (slice = off >> 5; slice <= (off + count - 1) >> 5; slice++) eeprom_update_client(client, slice); - /* Hide Vaio security settings to regular users (16 first bytes) */ - if (data->nature == VAIO && off < 16 && !capable(CAP_SYS_ADMIN)) { - size_t in_row1 = 16 - off; - in_row1 = min(in_row1, count); - memset(buf, 0, in_row1); - if (count - in_row1 > 0) - memcpy(buf + in_row1, &data->data[16], count - in_row1); + /* Hide Vaio private settings to regular users: + - BIOS passwords: bytes 0x00 to 0x0f + - UUID: bytes 0x10 to 0x1f + - Serial number: 0xc0 to 0xdf */ + if (data->nature == VAIO && !capable(CAP_SYS_ADMIN)) { + int i; + + for (i = 0; i < count; i++) { + if ((off + i <= 0x1f) || + (off + i >= 0xc0 && off + i <= 0xdf)) + buf[i] = 0; + else + buf[i] = data->data[off + i]; + } } else { memcpy(buf, &data->data[off], count); } @@ -197,14 +204,18 @@ static int eeprom_detect(struct i2c_adapter *adapter, int address, int kind) goto exit_kfree; /* Detect the Vaio nature of EEPROMs. - We use the "PCG-" prefix as the signature. */ + We use the "PCG-" or "VGN-" prefix as the signature. */ if (address == 0x57) { - if (i2c_smbus_read_byte_data(new_client, 0x80) == 'P' - && i2c_smbus_read_byte(new_client) == 'C' - && i2c_smbus_read_byte(new_client) == 'G' - && i2c_smbus_read_byte(new_client) == '-') { + char name[4]; + + name[0] = i2c_smbus_read_byte_data(new_client, 0x80); + name[1] = i2c_smbus_read_byte(new_client); + name[2] = i2c_smbus_read_byte(new_client); + name[3] = i2c_smbus_read_byte(new_client); + + if (!memcmp(name, "PCG-", 4) || !memcmp(name, "VGN-", 4)) { dev_info(&new_client->dev, "Vaio EEPROM detected, " - "enabling password protection\n"); + "enabling privacy protection\n"); data->nature = VAIO; } } diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 1a4e8dc..b5e13e4 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -673,7 +673,7 @@ static int __i2c_check_addr(struct i2c_adapter *adapter, unsigned int addr) return 0; } -int i2c_check_addr(struct i2c_adapter *adapter, int addr) +static int i2c_check_addr(struct i2c_adapter *adapter, int addr) { int rval; @@ -683,7 +683,6 @@ int i2c_check_addr(struct i2c_adapter *adapter, int addr) return rval; } -EXPORT_SYMBOL(i2c_check_addr); int i2c_attach_client(struct i2c_client *client) { diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c index 5a15e50..c21ae20 100644 --- a/drivers/i2c/i2c-dev.c +++ b/drivers/i2c/i2c-dev.c @@ -38,6 +38,15 @@ static struct i2c_driver i2cdev_driver; +/* + * An i2c_dev represents an i2c_adapter ... an I2C or SMBus master, not a + * slave (i2c_client) with which messages will be exchanged. It's coupled + * with a character special file which is accessed by user mode drivers. + * + * The list of i2c_dev structures is parallel to the i2c_adapter lists + * maintained by the driver model, and is updated using notifications + * delivered to the i2cdev_driver. + */ struct i2c_dev { struct list_head list; struct i2c_adapter *adap; @@ -103,6 +112,25 @@ static ssize_t show_adapter_name(struct device *dev, } static DEVICE_ATTR(name, S_IRUGO, show_adapter_name, NULL); +/* ------------------------------------------------------------------------- */ + +/* + * After opening an instance of this character special file, a file + * descriptor starts out associated only with an i2c_adapter (and bus). + * + * Using the I2C_RDWR ioctl(), you can then *immediately* issue i2c_msg + * traffic to any devices on the bus used by that adapter. That's because + * the i2c_msg vectors embed all the addressing information they need, and + * are submitted directly to an i2c_adapter. However, SMBus-only adapters + * don't support that interface. + * + * To use read()/write() system calls on that file descriptor, or to use + * SMBus interfaces (and work with SMBus-only hosts!), you must first issue + * an I2C_SLAVE (or I2C_SLAVE_FORCE) ioctl. That configures an anonymous + * (never registered) i2c_client so it holds the addressing information + * needed by those system calls and by this SMBus interface. + */ + static ssize_t i2cdev_read (struct file *file, char __user *buf, size_t count, loff_t *offset) { @@ -154,6 +182,29 @@ static ssize_t i2cdev_write (struct file *file, const char __user *buf, size_t c return ret; } +/* This address checking function differs from the one in i2c-core + in that it considers an address with a registered device, but no + bounded driver, as NOT busy. */ +static int i2cdev_check_addr(struct i2c_adapter *adapter, unsigned int addr) +{ + struct list_head *item; + struct i2c_client *client; + int res = 0; + + mutex_lock(&adapter->clist_lock); + list_for_each(item, &adapter->clients) { + client = list_entry(item, struct i2c_client, list); + if (client->addr == addr) { + if (client->driver) + res = -EBUSY; + break; + } + } + mutex_unlock(&adapter->clist_lock); + + return res; +} + static int i2cdev_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) { @@ -172,11 +223,22 @@ static int i2cdev_ioctl(struct inode *inode, struct file *file, switch ( cmd ) { case I2C_SLAVE: case I2C_SLAVE_FORCE: + /* NOTE: devices set up to work with "new style" drivers + * can't use I2C_SLAVE, even when the device node is not + * bound to a driver. Only I2C_SLAVE_FORCE will work. + * + * Setting the PEC flag here won't affect kernel drivers, + * which will be using the i2c_client node registered with + * the driver model core. Likewise, when that client has + * the PEC flag already set, the i2c-dev driver won't see + * (or use) this setting. + */ if ((arg > 0x3ff) || (((client->flags & I2C_M_TEN) == 0) && arg > 0x7f)) return -EINVAL; - if ((cmd == I2C_SLAVE) && i2c_check_addr(client->adapter,arg)) + if (cmd == I2C_SLAVE && i2cdev_check_addr(client->adapter, arg)) return -EBUSY; + /* REVISIT: address could become busy later */ client->addr = arg; return 0; case I2C_TENBIT: @@ -386,6 +448,13 @@ static int i2cdev_open(struct inode *inode, struct file *file) if (!adap) return -ENODEV; + /* This creates an anonymous i2c_client, which may later be + * pointed to some address using I2C_SLAVE or I2C_SLAVE_FORCE. + * + * This client is ** NEVER REGISTERED ** with the driver model + * or I2C core code!! It just holds private copies of addressing + * information and maybe a PEC flag. + */ client = kzalloc(sizeof(*client), GFP_KERNEL); if (!client) { i2c_put_adapter(adap); @@ -394,7 +463,6 @@ static int i2cdev_open(struct inode *inode, struct file *file) snprintf(client->name, I2C_NAME_SIZE, "i2c-dev %d", adap->nr); client->driver = &i2cdev_driver; - /* registered with adapter, passed as client to user */ client->adapter = adap; file->private_data = client; @@ -422,6 +490,14 @@ static const struct file_operations i2cdev_fops = { .release = i2cdev_release, }; +/* ------------------------------------------------------------------------- */ + +/* + * The legacy "i2cdev_driver" is used primarily to get notifications when + * I2C adapters are added or removed, so that each one gets an i2c_dev + * and is thus made available to userspace driver code. + */ + static struct class *i2c_dev_class; static int i2cdev_attach_adapter(struct i2c_adapter *adap) @@ -486,6 +562,12 @@ static struct i2c_driver i2cdev_driver = { .detach_client = i2cdev_detach_client, }; +/* ------------------------------------------------------------------------- */ + +/* + * module load/unload record keeping + */ + static int __init i2c_dev_init(void) { int res; diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 8033e6b..a100c9f 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -400,11 +400,6 @@ extern int i2c_release_client(struct i2c_client *); extern void i2c_clients_command(struct i2c_adapter *adap, unsigned int cmd, void *arg); -/* returns -EBUSY if address has been taken, 0 if not. Note that the only - other place at which this is called is within i2c_attach_client; so - you can cheat by simply not registering. Not recommended, of course! */ -extern int i2c_check_addr (struct i2c_adapter *adapter, int addr); - /* Detect function. It iterates over all possible addresses itself. * It will only call found_proc if some client is connected at the * specific address (unless a 'force' matched); |
