summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/uio/Kconfig11
-rw-r--r--drivers/uio/Makefile1
-rw-r--r--drivers/uio/uio_netx.c172
3 files changed, 184 insertions, 0 deletions
diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig
index 8aa1955..069b144 100644
--- a/drivers/uio/Kconfig
+++ b/drivers/uio/Kconfig
@@ -94,4 +94,15 @@ config UIO_PCI_GENERIC
primarily, for virtualization scenarios.
If you compile this as a module, it will be called uio_pci_generic.
+config UIO_NETX
+ tristate "Hilscher NetX Card driver"
+ depends on PCI
+ help
+ Driver for Hilscher NetX based fieldbus cards (cifX, comX).
+ This driver requires a userspace component that comes with the card
+ or is available from Hilscher (http://www.hilscher.com).
+
+ To compile this driver as a module, choose M here; the module
+ will be called uio_netx.
+
endif
diff --git a/drivers/uio/Makefile b/drivers/uio/Makefile
index 73b2e75..aa7d033 100644
--- a/drivers/uio/Makefile
+++ b/drivers/uio/Makefile
@@ -6,3 +6,4 @@ obj-$(CONFIG_UIO_SMX) += uio_smx.o
obj-$(CONFIG_UIO_AEC) += uio_aec.o
obj-$(CONFIG_UIO_SERCOS3) += uio_sercos3.o
obj-$(CONFIG_UIO_PCI_GENERIC) += uio_pci_generic.o
+obj-$(CONFIG_UIO_NETX) += uio_netx.o
diff --git a/drivers/uio/uio_netx.c b/drivers/uio/uio_netx.c
new file mode 100644
index 0000000..afbf0bd
--- /dev/null
+++ b/drivers/uio/uio_netx.c
@@ -0,0 +1,172 @@
+/*
+ * UIO driver for Hilscher NetX based fieldbus cards (cifX, comX).
+ * See http://www.hilscher.com for details.
+ *
+ * (C) 2007 Hans J. Koch <hjk@linutronix.de>
+ * (C) 2008 Manuel Traut <manut@linutronix.de>
+ *
+ * Licensed under GPL version 2 only.
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/uio_driver.h>
+
+#define PCI_VENDOR_ID_HILSCHER 0x15CF
+#define PCI_DEVICE_ID_HILSCHER_NETX 0x0000
+#define PCI_SUBDEVICE_ID_NXSB_PCA 0x3235
+#define PCI_SUBDEVICE_ID_NXPCA 0x3335
+
+#define DPM_HOST_INT_EN0 0xfff0
+#define DPM_HOST_INT_STAT0 0xffe0
+
+#define DPM_HOST_INT_MASK 0xe600ffff
+#define DPM_HOST_INT_GLOBAL_EN 0x80000000
+
+static irqreturn_t netx_handler(int irq, struct uio_info *dev_info)
+{
+ void __iomem *int_enable_reg = dev_info->mem[0].internal_addr
+ + DPM_HOST_INT_EN0;
+ void __iomem *int_status_reg = dev_info->mem[0].internal_addr
+ + DPM_HOST_INT_STAT0;
+
+ /* Is one of our interrupts enabled and active ? */
+ if (!(ioread32(int_enable_reg) & ioread32(int_status_reg)
+ & DPM_HOST_INT_MASK))
+ return IRQ_NONE;
+
+ /* Disable interrupt */
+ iowrite32(ioread32(int_enable_reg) & ~DPM_HOST_INT_GLOBAL_EN,
+ int_enable_reg);
+ return IRQ_HANDLED;
+}
+
+static int __devinit netx_pci_probe(struct pci_dev *dev,
+ const struct pci_device_id *id)
+{
+ struct uio_info *info;
+ int bar;
+
+ info = kzalloc(sizeof(struct uio_info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ if (pci_enable_device(dev))
+ goto out_free;
+
+ if (pci_request_regions(dev, "netx"))
+ goto out_disable;
+
+ switch (id->device) {
+ case PCI_DEVICE_ID_HILSCHER_NETX:
+ bar = 0;
+ info->name = "netx";
+ break;
+ default:
+ bar = 2;
+ info->name = "netx_plx";
+ }
+
+ /* BAR0 or 2 points to the card's dual port memory */
+ info->mem[0].addr = pci_resource_start(dev, bar);
+ if (!info->mem[0].addr)
+ goto out_release;
+ info->mem[0].internal_addr = ioremap(pci_resource_start(dev, bar),
+ pci_resource_len(dev, bar));
+
+ if (!info->mem[0].internal_addr)
+ goto out_release;
+
+ info->mem[0].size = pci_resource_len(dev, bar);
+ info->mem[0].memtype = UIO_MEM_PHYS;
+ info->irq = dev->irq;
+ info->irq_flags = IRQF_SHARED;
+ info->handler = netx_handler;
+ info->version = "0.0.1";
+
+ /* Make sure all interrupts are disabled */
+ iowrite32(0, info->mem[0].internal_addr + DPM_HOST_INT_EN0);
+
+ if (uio_register_device(&dev->dev, info))
+ goto out_unmap;
+
+ pci_set_drvdata(dev, info);
+ dev_info(&dev->dev, "Found %s card, registered UIO device.\n",
+ info->name);
+
+ return 0;
+
+out_unmap:
+ iounmap(info->mem[0].internal_addr);
+out_release:
+ pci_release_regions(dev);
+out_disable:
+ pci_disable_device(dev);
+out_free:
+ kfree(info);
+ return -ENODEV;
+}
+
+static void netx_pci_remove(struct pci_dev *dev)
+{
+ struct uio_info *info = pci_get_drvdata(dev);
+
+ /* Disable all interrupts */
+ iowrite32(0, info->mem[0].internal_addr + DPM_HOST_INT_EN0);
+ uio_unregister_device(info);
+ pci_release_regions(dev);
+ pci_disable_device(dev);
+ pci_set_drvdata(dev, NULL);
+ iounmap(info->mem[0].internal_addr);
+
+ kfree(info);
+}
+
+static struct pci_device_id netx_pci_ids[] = {
+ {
+ .vendor = PCI_VENDOR_ID_HILSCHER,
+ .device = PCI_DEVICE_ID_HILSCHER_NETX,
+ .subvendor = 0,
+ .subdevice = 0,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_PLX,
+ .device = PCI_DEVICE_ID_PLX_9030,
+ .subvendor = PCI_VENDOR_ID_PLX,
+ .subdevice = PCI_SUBDEVICE_ID_NXSB_PCA,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_PLX,
+ .device = PCI_DEVICE_ID_PLX_9030,
+ .subvendor = PCI_VENDOR_ID_PLX,
+ .subdevice = PCI_SUBDEVICE_ID_NXPCA,
+ },
+ { 0, }
+};
+
+static struct pci_driver netx_pci_driver = {
+ .name = "netx",
+ .id_table = netx_pci_ids,
+ .probe = netx_pci_probe,
+ .remove = netx_pci_remove,
+};
+
+static int __init netx_init_module(void)
+{
+ return pci_register_driver(&netx_pci_driver);
+}
+
+static void __exit netx_exit_module(void)
+{
+ pci_unregister_driver(&netx_pci_driver);
+}
+
+module_init(netx_init_module);
+module_exit(netx_exit_module);
+
+MODULE_DEVICE_TABLE(pci, netx_pci_ids);
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Hans J. Koch, Manuel Traut");
OpenPOWER on IntegriCloud