summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/net/can/Kconfig5
-rw-r--r--net/can/Kconfig7
2 files changed, 4 insertions, 8 deletions
diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig
index b56bd9e..8088d8f 100644
--- a/drivers/net/can/Kconfig
+++ b/drivers/net/can/Kconfig
@@ -1,9 +1,7 @@
menu "CAN Device Drivers"
- depends on CAN
config CAN_VCAN
tristate "Virtual Local CAN Interface (vcan)"
- depends on CAN
---help---
Similar to the network loopback devices, vcan offers a
virtual local CAN interface.
@@ -13,7 +11,6 @@ config CAN_VCAN
config CAN_SLCAN
tristate "Serial / USB serial CAN Adaptors (slcan)"
- depends on CAN
---help---
CAN driver for several 'low cost' CAN interfaces that are attached
via serial lines or via USB-to-serial adapters using the LAWICEL
@@ -33,7 +30,6 @@ config CAN_SLCAN
config CAN_DEV
tristate "Platform CAN drivers with Netlink support"
- depends on CAN
default y
---help---
Enables the common framework for platform CAN drivers with Netlink
@@ -133,7 +129,6 @@ source "drivers/net/can/softing/Kconfig"
config CAN_DEBUG_DEVICES
bool "CAN devices debugging messages"
- depends on CAN
---help---
Say Y here if you want the CAN device drivers to produce a bunch of
debug messages to the system log. Select this if you are having
diff --git a/net/can/Kconfig b/net/can/Kconfig
index 0320069..0435fc4 100644
--- a/net/can/Kconfig
+++ b/net/can/Kconfig
@@ -16,9 +16,10 @@ menuconfig CAN
If you want CAN support you should say Y here and also to the
specific driver for your controller(s) below.
+if CAN
+
config CAN_RAW
tristate "Raw CAN Protocol (raw access with CAN-ID filtering)"
- depends on CAN
default N
---help---
The raw CAN protocol option offers access to the CAN bus via
@@ -29,7 +30,6 @@ config CAN_RAW
config CAN_BCM
tristate "Broadcast Manager CAN Protocol (with content filtering)"
- depends on CAN
default N
---help---
The Broadcast Manager offers content filtering, timeout monitoring,
@@ -42,7 +42,6 @@ config CAN_BCM
config CAN_GW
tristate "CAN Gateway/Router (with netlink configuration)"
- depends on CAN
default N
---help---
The CAN Gateway/Router is used to route (and modify) CAN frames.
@@ -53,3 +52,5 @@ config CAN_GW
by the netlink configuration interface known e.g. from iptables.
source "drivers/net/can/Kconfig"
+
+endif
OpenPOWER on IntegriCloud