diff options
| -rw-r--r-- | drivers/scsi/scsi_error.c | 239 |
1 files changed, 123 insertions, 116 deletions
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index 2dce06a..b8edcf5 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -458,6 +458,128 @@ static void scsi_eh_done(struct scsi_cmnd *scmd) } /** + * scsi_try_host_reset - ask host adapter to reset itself + * @scmd: SCSI cmd to send hsot reset. + **/ +static int scsi_try_host_reset(struct scsi_cmnd *scmd) +{ + unsigned long flags; + int rtn; + + SCSI_LOG_ERROR_RECOVERY(3, printk("%s: Snd Host RST\n", + __FUNCTION__)); + + if (!scmd->device->host->hostt->eh_host_reset_handler) + return FAILED; + + rtn = scmd->device->host->hostt->eh_host_reset_handler(scmd); + + if (rtn == SUCCESS) { + if (!scmd->device->host->hostt->skip_settle_delay) + ssleep(HOST_RESET_SETTLE_TIME); + spin_lock_irqsave(scmd->device->host->host_lock, flags); + scsi_report_bus_reset(scmd->device->host, + scmd_channel(scmd)); + spin_unlock_irqrestore(scmd->device->host->host_lock, flags); + } + + return rtn; +} + +/** + * scsi_try_bus_reset - ask host to perform a bus reset + * @scmd: SCSI cmd to send bus reset. + **/ +static int scsi_try_bus_reset(struct scsi_cmnd *scmd) +{ + unsigned long flags; + int rtn; + + SCSI_LOG_ERROR_RECOVERY(3, printk("%s: Snd Bus RST\n", + __FUNCTION__)); + + if (!scmd->device->host->hostt->eh_bus_reset_handler) + return FAILED; + + rtn = scmd->device->host->hostt->eh_bus_reset_handler(scmd); + + if (rtn == SUCCESS) { + if (!scmd->device->host->hostt->skip_settle_delay) + ssleep(BUS_RESET_SETTLE_TIME); + spin_lock_irqsave(scmd->device->host->host_lock, flags); + scsi_report_bus_reset(scmd->device->host, + scmd_channel(scmd)); + spin_unlock_irqrestore(scmd->device->host->host_lock, flags); + } + + return rtn; +} + +/** + * scsi_try_bus_device_reset - Ask host to perform a BDR on a dev + * @scmd: SCSI cmd used to send BDR + * + * Notes: + * There is no timeout for this operation. if this operation is + * unreliable for a given host, then the host itself needs to put a + * timer on it, and set the host back to a consistent state prior to + * returning. + **/ +static int scsi_try_bus_device_reset(struct scsi_cmnd *scmd) +{ + int rtn; + + if (!scmd->device->host->hostt->eh_device_reset_handler) + return FAILED; + + rtn = scmd->device->host->hostt->eh_device_reset_handler(scmd); + if (rtn == SUCCESS) { + scmd->device->was_reset = 1; + scmd->device->expecting_cc_ua = 1; + } + + return rtn; +} + +static int __scsi_try_to_abort_cmd(struct scsi_cmnd *scmd) +{ + if (!scmd->device->host->hostt->eh_abort_handler) + return FAILED; + + return scmd->device->host->hostt->eh_abort_handler(scmd); +} + +/** + * scsi_try_to_abort_cmd - Ask host to abort a running command. + * @scmd: SCSI cmd to abort from Lower Level. + * + * Notes: + * This function will not return until the user's completion function + * has been called. there is no timeout on this operation. if the + * author of the low-level driver wishes this operation to be timed, + * they can provide this facility themselves. helper functions in + * scsi_error.c can be supplied to make this easier to do. + **/ +static int scsi_try_to_abort_cmd(struct scsi_cmnd *scmd) +{ + /* + * scsi_done was called just after the command timed out and before + * we had a chance to process it. (db) + */ + if (scmd->serial_number == 0) + return SUCCESS; + return __scsi_try_to_abort_cmd(scmd); +} + +static void scsi_abort_eh_cmnd(struct scsi_cmnd *scmd) +{ + if (__scsi_try_to_abort_cmd(scmd) != SUCCESS) + if (scsi_try_bus_device_reset(scmd) != SUCCESS) + if (scsi_try_bus_reset(scmd) != SUCCESS) + scsi_try_host_reset(scmd); +} + +/** * scsi_send_eh_cmnd - submit a scsi command as part of error recory * @scmd: SCSI command structure to hijack * @cmnd: CDB to send @@ -584,13 +706,7 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, unsigned char *cmnd, break; } } else { - /* - * FIXME(eric) - we are not tracking whether we could - * abort a timed out command or not. not sure how - * we should treat them differently anyways. - */ - if (shost->hostt->eh_abort_handler) - shost->hostt->eh_abort_handler(scmd); + scsi_abort_eh_cmnd(scmd); rtn = FAILED; } @@ -723,31 +839,6 @@ int scsi_eh_get_sense(struct list_head *work_q, EXPORT_SYMBOL_GPL(scsi_eh_get_sense); /** - * scsi_try_to_abort_cmd - Ask host to abort a running command. - * @scmd: SCSI cmd to abort from Lower Level. - * - * Notes: - * This function will not return until the user's completion function - * has been called. there is no timeout on this operation. if the - * author of the low-level driver wishes this operation to be timed, - * they can provide this facility themselves. helper functions in - * scsi_error.c can be supplied to make this easier to do. - **/ -static int scsi_try_to_abort_cmd(struct scsi_cmnd *scmd) -{ - if (!scmd->device->host->hostt->eh_abort_handler) - return FAILED; - - /* - * scsi_done was called just after the command timed out and before - * we had a chance to process it. (db) - */ - if (scmd->serial_number == 0) - return SUCCESS; - return scmd->device->host->hostt->eh_abort_handler(scmd); -} - -/** * scsi_eh_tur - Send TUR to device. * @scmd: Scsi cmd to send TUR * @@ -821,32 +912,6 @@ static int scsi_eh_abort_cmds(struct list_head *work_q, } /** - * scsi_try_bus_device_reset - Ask host to perform a BDR on a dev - * @scmd: SCSI cmd used to send BDR - * - * Notes: - * There is no timeout for this operation. if this operation is - * unreliable for a given host, then the host itself needs to put a - * timer on it, and set the host back to a consistent state prior to - * returning. - **/ -static int scsi_try_bus_device_reset(struct scsi_cmnd *scmd) -{ - int rtn; - - if (!scmd->device->host->hostt->eh_device_reset_handler) - return FAILED; - - rtn = scmd->device->host->hostt->eh_device_reset_handler(scmd); - if (rtn == SUCCESS) { - scmd->device->was_reset = 1; - scmd->device->expecting_cc_ua = 1; - } - - return rtn; -} - -/** * scsi_eh_try_stu - Send START_UNIT to device. * @scmd: Scsi cmd to send START_UNIT * @@ -977,64 +1042,6 @@ static int scsi_eh_bus_device_reset(struct Scsi_Host *shost, } /** - * scsi_try_bus_reset - ask host to perform a bus reset - * @scmd: SCSI cmd to send bus reset. - **/ -static int scsi_try_bus_reset(struct scsi_cmnd *scmd) -{ - unsigned long flags; - int rtn; - - SCSI_LOG_ERROR_RECOVERY(3, printk("%s: Snd Bus RST\n", - __FUNCTION__)); - - if (!scmd->device->host->hostt->eh_bus_reset_handler) - return FAILED; - - rtn = scmd->device->host->hostt->eh_bus_reset_handler(scmd); - - if (rtn == SUCCESS) { - if (!scmd->device->host->hostt->skip_settle_delay) - ssleep(BUS_RESET_SETTLE_TIME); - spin_lock_irqsave(scmd->device->host->host_lock, flags); - scsi_report_bus_reset(scmd->device->host, - scmd_channel(scmd)); - spin_unlock_irqrestore(scmd->device->host->host_lock, flags); - } - - return rtn; -} - -/** - * scsi_try_host_reset - ask host adapter to reset itself - * @scmd: SCSI cmd to send hsot reset. - **/ -static int scsi_try_host_reset(struct scsi_cmnd *scmd) -{ - unsigned long flags; - int rtn; - - SCSI_LOG_ERROR_RECOVERY(3, printk("%s: Snd Host RST\n", - __FUNCTION__)); - - if (!scmd->device->host->hostt->eh_host_reset_handler) - return FAILED; - - rtn = scmd->device->host->hostt->eh_host_reset_handler(scmd); - - if (rtn == SUCCESS) { - if (!scmd->device->host->hostt->skip_settle_delay) - ssleep(HOST_RESET_SETTLE_TIME); - spin_lock_irqsave(scmd->device->host->host_lock, flags); - scsi_report_bus_reset(scmd->device->host, - scmd_channel(scmd)); - spin_unlock_irqrestore(scmd->device->host->host_lock, flags); - } - - return rtn; -} - -/** * scsi_eh_bus_reset - send a bus reset * @shost: scsi host being recovered. * @eh_done_q: list_head for processed commands. |
