diff options
| -rw-r--r-- | include/sound/wm8955.h | 26 | ||||
| -rw-r--r-- | sound/soc/codecs/Kconfig | 4 | ||||
| -rw-r--r-- | sound/soc/codecs/Makefile | 2 | ||||
| -rw-r--r-- | sound/soc/codecs/wm8955.c | 1151 | ||||
| -rw-r--r-- | sound/soc/codecs/wm8955.h | 489 |
5 files changed, 1672 insertions, 0 deletions
diff --git a/include/sound/wm8955.h b/include/sound/wm8955.h new file mode 100644 index 0000000..5074ef4 --- /dev/null +++ b/include/sound/wm8955.h @@ -0,0 +1,26 @@ +/* + * Platform data for WM8955 + * + * Copyright 2009 Wolfson Microelectronics PLC. + * + * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __WM8955_PDATA_H__ +#define __WM8955_PDATA_H__ + +struct wm8955_pdata { + /* Configure LOUT2/ROUT2 to drive a speaker */ + unsigned int out2_speaker:1; + + /* Configure MONOIN+/- in differential mode */ + unsigned int monoin_diff:1; +}; + +#endif diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 691abe7..62ff26a 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -52,6 +52,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_WM8903 if I2C select SND_SOC_WM8904 if I2C select SND_SOC_WM8940 if I2C + select SND_SOC_WM8955 if I2C select SND_SOC_WM8960 if I2C select SND_SOC_WM8961 if I2C select SND_SOC_WM8971 if I2C @@ -214,6 +215,9 @@ config SND_SOC_WM8904 config SND_SOC_WM8940 tristate +config SND_SOC_WM8955 + tristate + config SND_SOC_WM8960 tristate diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index c0fd3c8..ea98354 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -39,6 +39,7 @@ snd-soc-wm8900-objs := wm8900.o snd-soc-wm8903-objs := wm8903.o snd-soc-wm8904-objs := wm8904.o snd-soc-wm8940-objs := wm8940.o +snd-soc-wm8955-objs := wm8955.o snd-soc-wm8960-objs := wm8960.o snd-soc-wm8961-objs := wm8961.o snd-soc-wm8971-objs := wm8971.o @@ -97,6 +98,7 @@ obj-$(CONFIG_SND_SOC_WM8900) += snd-soc-wm8900.o obj-$(CONFIG_SND_SOC_WM8903) += snd-soc-wm8903.o obj-$(CONFIG_SND_SOC_WM8904) += snd-soc-wm8904.o obj-$(CONFIG_SND_SOC_WM8940) += snd-soc-wm8940.o +obj-$(CONFIG_SND_SOC_WM8955) += snd-soc-wm8955.o obj-$(CONFIG_SND_SOC_WM8960) += snd-soc-wm8960.o obj-$(CONFIG_SND_SOC_WM8961) += snd-soc-wm8961.o obj-$(CONFIG_SND_SOC_WM8971) += snd-soc-wm8971.o diff --git a/sound/soc/codecs/wm8955.c b/sound/soc/codecs/wm8955.c new file mode 100644 index 0000000..615dab2 --- /dev/null +++ b/sound/soc/codecs/wm8955.c @@ -0,0 +1,1151 @@ +/* + * wm8955.c -- WM8955 ALSA SoC Audio driver + * + * Copyright 2009 Wolfson Microelectronics plc + * + * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pm.h> +#include <linux/i2c.h> +#include <linux/platform_device.h> +#include <linux/regulator/consumer.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/initval.h> +#include <sound/tlv.h> +#include <sound/wm8955.h> + +#include "wm8955.h" + +static struct snd_soc_codec *wm8955_codec; +struct snd_soc_codec_device soc_codec_dev_wm8955; + +#define WM8955_NUM_SUPPLIES 4 +static const char *wm8955_supply_names[WM8955_NUM_SUPPLIES] = { + "DCVDD", + "DBVDD", + "HPVDD", + "AVDD", +}; + +/* codec private data */ +struct wm8955_priv { + struct snd_soc_codec codec; + u16 reg_cache[WM8955_MAX_REGISTER + 1]; + + unsigned int mclk_rate; + + int deemph; + int fs; + + struct regulator_bulk_data supplies[WM8955_NUM_SUPPLIES]; + + struct wm8955_pdata *pdata; +}; + +static const u16 wm8955_reg[WM8955_MAX_REGISTER + 1] = { + 0x0000, /* R0 */ + 0x0000, /* R1 */ + 0x0079, /* R2 - LOUT1 volume */ + 0x0079, /* R3 - ROUT1 volume */ + 0x0000, /* R4 */ + 0x0008, /* R5 - DAC Control */ + 0x0000, /* R6 */ + 0x000A, /* R7 - Audio Interface */ + 0x0000, /* R8 - Sample Rate */ + 0x0000, /* R9 */ + 0x00FF, /* R10 - Left DAC volume */ + 0x00FF, /* R11 - Right DAC volume */ + 0x000F, /* R12 - Bass control */ + 0x000F, /* R13 - Treble control */ + 0x0000, /* R14 */ + 0x0000, /* R15 - Reset */ + 0x0000, /* R16 */ + 0x0000, /* R17 */ + 0x0000, /* R18 */ + 0x0000, /* R19 */ + 0x0000, /* R20 */ + 0x0000, /* R21 */ + 0x0000, /* R22 */ + 0x00C1, /* R23 - Additional control (1) */ + 0x0000, /* R24 - Additional control (2) */ + 0x0000, /* R25 - Power Management (1) */ + 0x0000, /* R26 - Power Management (2) */ + 0x0000, /* R27 - Additional Control (3) */ + 0x0000, /* R28 */ + 0x0000, /* R29 */ + 0x0000, /* R30 */ + 0x0000, /* R31 */ + 0x0000, /* R32 */ + 0x0000, /* R33 */ + 0x0050, /* R34 - Left out Mix (1) */ + 0x0050, /* R35 - Left out Mix (2) */ + 0x0050, /* R36 - Right out Mix (1) */ + 0x0050, /* R37 - Right Out Mix (2) */ + 0x0050, /* R38 - Mono out Mix (1) */ + 0x0050, /* R39 - Mono out Mix (2) */ + 0x0079, /* R40 - LOUT2 volume */ + 0x0079, /* R41 - ROUT2 volume */ + 0x0079, /* R42 - MONOOUT volume */ + 0x0000, /* R43 - Clocking / PLL */ + 0x0103, /* R44 - PLL Control 1 */ + 0x0024, /* R45 - PLL Control 2 */ + 0x01BA, /* R46 - PLL Control 3 */ + 0x0000, /* R47 */ + 0x0000, /* R48 */ + 0x0000, /* R49 */ + 0x0000, /* R50 */ + 0x0000, /* R51 */ + 0x0000, /* R52 */ + 0x0000, /* R53 */ + 0x0000, /* R54 */ + 0x0000, /* R55 */ + 0x0000, /* R56 */ + 0x0000, /* R57 */ + 0x0000, /* R58 */ + 0x0000, /* R59 - PLL Control 4 */ +}; + +static int wm8955_reset(struct snd_soc_codec *codec) +{ + return snd_soc_write(codec, WM8955_RESET, 0); +} + +struct pll_factors { + int n; + int k; + int outdiv; +}; + +/* The size in bits of the FLL divide multiplied by 10 + * to allow rounding later */ +#define FIXED_FLL_SIZE ((1 << 22) * 10) + +static int wm8995_pll_factors(struct device *dev, + int Fref, int Fout, struct pll_factors *pll) +{ + u64 Kpart; + unsigned int K, Ndiv, Nmod, target; + + dev_dbg(dev, "Fref=%u Fout=%u\n", Fref, Fout); + + /* The oscilator should run at should be 90-100MHz, and + * there's a divide by 4 plus an optional divide by 2 in the + * output path to generate the system clock. The clock table + * is sortd so we should always generate a suitable target. */ + target = Fout * 4; + if (target < 90000000) { + pll->outdiv = 1; + target *= 2; + } else { + pll->outdiv = 0; + } + + WARN_ON(target < 90000000 || target > 100000000); + + dev_dbg(dev, "Fvco=%dHz\n", target); + + /* Now, calculate N.K */ + Ndiv = target / Fref; + + pll->n = Ndiv; + Nmod = target % Fref; + dev_dbg(dev, "Nmod=%d\n", Nmod); + + /* Calculate fractional part - scale up so we can round. */ + Kpart = FIXED_FLL_SIZE * (long long)Nmod; + + do_div(Kpart, Fref); + + K = Kpart & 0xFFFFFFFF; + + if ((K % 10) >= 5) + K += 5; + + /* Move down to proper range now rounding is done */ + pll->k = K / 10; + + dev_dbg(dev, "N=%x K=%x OUTDIV=%x\n", pll->n, pll->k, pll->outdiv); + + return 0; +} + +/* Lookup table specifiying SRATE (table 25 in datasheet); some of the + * output frequencies have been rounded to the standard frequencies + * they are intended to match where the error is slight. */ +static struct { + int mclk; + int fs; + int usb; + int sr; +} clock_cfgs[] = { + { 18432000, 8000, 0, 3, }, + { 18432000, 12000, 0, 9, }, + { 18432000, 16000, 0, 11, }, + { 18432000, 24000, 0, 29, }, + { 18432000, 32000, 0, 13, }, + { 18432000, 48000, 0, 1, }, + { 18432000, 96000, 0, 15, }, + + { 16934400, 8018, 0, 19, }, + { 16934400, 11025, 0, 25, }, + { 16934400, 22050, 0, 27, }, + { 16934400, 44100, 0, 17, }, + { 16934400, 88200, 0, 31, }, + + { 12000000, 8000, 1, 2, }, + { 12000000, 11025, 1, 25, }, + { 12000000, 12000, 1, 8, }, + { 12000000, 16000, 1, 10, }, + { 12000000, 22050, 1, 27, }, + { 12000000, 24000, 1, 28, }, + { 12000000, 32000, 1, 12, }, + { 12000000, 44100, 1, 17, }, + { 12000000, 48000, 1, 0, }, + { 12000000, 88200, 1, 31, }, + { 12000000, 96000, 1, 14, }, + + { 12288000, 8000, 0, 2, }, + { 12288000, 12000, 0, 8, }, + { 12288000, 16000, 0, 10, }, + { 12288000, 24000, 0, 28, }, + { 12288000, 32000, 0, 12, }, + { 12288000, 48000, 0, 0, }, + { 12288000, 96000, 0, 14, }, + + { 12289600, 8018, 0, 18, }, + { 12289600, 11025, 0, 24, }, + { 12289600, 22050, 0, 26, }, + { 11289600, 44100, 0, 16, }, + { 11289600, 88200, 0, 31, }, +}; + +static int wm8955_configure_clocking(struct snd_soc_codec *codec) +{ + struct wm8955_priv *wm8955 = codec->private_data; + int i, ret, val; + int clocking = 0; + int srate = 0; + int sr = -1; + struct pll_factors pll; + + /* If we're not running a sample rate currently just pick one */ + if (wm8955->fs == 0) + wm8955->fs = 8000; + + /* Can we generate an exact output? */ + for (i = 0; i < ARRAY_SIZE(clock_cfgs); i++) { + if (wm8955->fs != clock_cfgs[i].fs) + continue; + sr = i; + + if (wm8955->mclk_rate == clock_cfgs[i].mclk) + break; + } + + /* We should never get here with an unsupported sample rate */ + if (sr == -1) { + dev_err(codec->dev, "Sample rate %dHz unsupported\n", + wm8955->fs); + WARN_ON(sr == -1); + return -EINVAL; + } + + if (i == ARRAY_SIZE(clock_cfgs)) { + /* If we can't generate the right clock from MCLK then + * we should configure the PLL to supply us with an + * appropriate clock. + */ + clocking |= WM8955_MCLKSEL; + + /* Use the last divider configuration we saw for the + * sample rate. */ + ret = wm8995_pll_factors(codec->dev, wm8955->mclk_rate, + clock_cfgs[sr].mclk, &pll); + if (ret != 0) { + dev_err(codec->dev, + "Unable to generate %dHz from %dHz MCLK\n", + wm8955->fs, wm8955->mclk_rate); + return -EINVAL; + } + + snd_soc_update_bits(codec, WM8955_PLL_CONTROL_1, + WM8955_N_MASK | WM8955_K_21_18_MASK, + (pll.n << WM8955_N_SHIFT) | + pll.k >> 18); + snd_soc_update_bits(codec, WM8955_PLL_CONTROL_2, + WM8955_K_17_9_MASK, + (pll.k >> 9) & WM8955_K_17_9_MASK); + snd_soc_update_bits(codec, WM8955_PLL_CONTROL_2, + WM8955_K_8_0_MASK, + pll.k & WM8955_K_8_0_MASK); + if (pll.k) + snd_soc_update_bits(codec, WM8955_PLL_CONTROL_4, + WM8955_KEN, WM8955_KEN); + else + snd_soc_update_bits(codec, WM8955_PLL_CONTROL_4, + WM8955_KEN, 0); + + if (pll.outdiv) + val = WM8955_PLL_RB | WM8955_PLLOUTDIV2; + else + val = WM8955_PLL_RB; + + /* Now start the PLL running */ + snd_soc_update_bits(codec, WM8955_CLOCKING_PLL, + WM8955_PLL_RB | WM8955_PLLOUTDIV2, val); + snd_soc_update_bits(codec, WM8955_CLOCKING_PLL, + WM8955_PLLEN, WM8955_PLLEN); + } + + srate = clock_cfgs[sr].usb | (clock_cfgs[sr].sr << WM8955_SR_SHIFT); + + snd_soc_update_bits(codec, WM8955_SAMPLE_RATE, + WM8955_USB | WM8955_SR_MASK, srate); + snd_soc_update_bits(codec, WM8955_CLOCKING_PLL, + WM8955_MCLKSEL, clocking); + + return 0; +} + +static int wm8955_sysclk(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = w->codec; + int ret = 0; + + /* Always disable the clocks - if we're doing reconfiguration this + * avoids misclocking. + */ + snd_soc_update_bits(codec, WM8955_POWER_MANAGEMENT_1, + WM8955_DIGENB, 0); + snd_soc_update_bits(codec, WM8955_CLOCKING_PLL, + WM8955_PLL_RB | WM8955_PLLEN, 0); + + switch (event) { + case SND_SOC_DAPM_POST_PMD: + break; + case SND_SOC_DAPM_PRE_PMU: + ret = wm8955_configure_clocking(codec); + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} + +static int deemph_settings[] = { 0, 32000, 44100, 48000 }; + +static int wm8955_set_deemph(struct snd_soc_codec *codec) +{ + struct wm8955_priv *wm8955 = codec->private_data; + int val, i, best; + + /* If we're using deemphasis select the nearest available sample + * rate. + */ + if (wm8955->deemph) { + best = 1; + for (i = 2; i < ARRAY_SIZE(deemph_settings); i++) { + if (abs(deemph_settings[i] - wm8955->fs) < + abs(deemph_settings[best] - wm8955->fs)) + best = i; + } + + val = best << WM8955_DEEMPH_SHIFT; + } else { + val = 0; + } + + dev_dbg(codec->dev, "Set deemphasis %d\n", val); + + return snd_soc_update_bits(codec, WM8955_DAC_CONTROL, + WM8955_DEEMPH_MASK, val); +} + +static int wm8955_get_deemph(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + struct wm8955_priv *wm8955 = codec->private_data; + + return wm8955->deemph; +} + +static int wm8955_put_deemph(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + struct wm8955_priv *wm8955 = codec->private_data; + int deemph = ucontrol->value.enumerated.item[0]; + + if (deemph > 1) + return -EINVAL; + + wm8955->deemph = deemph; + + return wm8955_set_deemph(codec); +} + +static const char *bass_mode_text[] = { + "Linear", "Adaptive", +}; + +static const struct soc_enum bass_mode = + SOC_ENUM_SINGLE(WM8955_BASS_CONTROL, 7, 2, bass_mode_text); + +static const char *bass_cutoff_text[] = { + "Low", "High" +}; + +static const struct soc_enum bass_cutoff = + SOC_ENUM_SINGLE(WM8955_BASS_CONTROL, 6, 2, bass_cutoff_text); + +static const char *treble_cutoff_text[] = { + "High", "Low" +}; + +static const struct soc_enum treble_cutoff = + SOC_ENUM_SINGLE(WM8955_TREBLE_CONTROL, 6, 2, treble_cutoff_text); + +static const DECLARE_TLV_DB_SCALE(digital_tlv, -12750, 50, 1); +static const DECLARE_TLV_DB_SCALE(atten_tlv, -600, 600, 0); +static const DECLARE_TLV_DB_SCALE(bypass_tlv, -1500, 300, 0); +static const DECLARE_TLV_DB_SCALE(mono_tlv, -2100, 300, 0); +static const DECLARE_TLV_DB_SCALE(out_tlv, -12100, 100, 1); +static const DECLARE_TLV_DB_SCALE(treble_tlv, -1200, 150, 1); + +static const struct snd_kcontrol_new wm8955_snd_controls[] = { +SOC_DOUBLE_R_TLV("Digital Playback Volume", WM8955_LEFT_DAC_VOLUME, + WM8955_RIGHT_DAC_VOLUME, 0, 255, 0, digital_tlv), +SOC_SINGLE_TLV("Playback Attenuation Volume", WM8955_DAC_CONTROL, 7, 1, 1, + atten_tlv), +SOC_SINGLE_BOOL_EXT("DAC Deemphasis Switch", 0, + wm8955_get_deemph, wm8955_put_deemph), + +SOC_ENUM("Bass Mode", bass_mode), +SOC_ENUM("Bass Cutoff", bass_cutoff), +SOC_SINGLE("Bass Volume", WM8955_BASS_CONTROL, 0, 15, 1), + +SOC_ENUM("Treble Cutoff", treble_cutoff), +SOC_SINGLE_TLV("Treble Volume", WM8955_TREBLE_CONTROL, 0, 14, 1, treble_tlv), + +SOC_SINGLE_TLV("Left Bypass Volume", WM8955_LEFT_OUT_MIX_1, 4, 7, 1, + bypass_tlv), +SOC_SINGLE_TLV("Left Mono Volume", WM8955_LEFT_OUT_MIX_2, 4, 7, 1, + bypass_tlv), + +SOC_SINGLE_TLV("Right Mono Volume", WM8955_RIGHT_OUT_MIX_1, 4, 7, 1, + bypass_tlv), +SOC_SINGLE_TLV("Right Bypass Volume", WM8955_RIGHT_OUT_MIX_2, 4, 7, 1, + bypass_tlv), + +/* Not a stereo pair so they line up with the DAPM switches */ +SOC_SINGLE_TLV("Mono Left Bypass Volume", WM8955_MONO_OUT_MIX_1, 4, 7, 1, + mono_tlv), +SOC_SINGLE_TLV("Mono Right Bypass Volume", WM8955_MONO_OUT_MIX_2, 4, 7, 1, + mono_tlv), + +SOC_DOUBLE_R_TLV("Headphone Volume", WM8955_LOUT1_VOLUME, + WM8955_ROUT1_VOLUME, 0, 127, 0, out_tlv), +SOC_DOUBLE_R("Headphone ZC Switch", WM8955_LOUT1_VOLUME, + WM8955_ROUT1_VOLUME, 7, 1, 0), + +SOC_DOUBLE_R_TLV("Speaker Volume", WM8955_LOUT2_VOLUME, + WM8955_ROUT2_VOLUME, 0, 127, 0, out_tlv), +SOC_DOUBLE_R("Speaker ZC Switch", WM8955_LOUT2_VOLUME, + WM8955_ROUT2_VOLUME, 7, 1, 0), + +SOC_SINGLE_TLV("Mono Volume", WM8955_MONOOUT_VOLUME, 0, 127, 0, out_tlv), +SOC_SINGLE("Mono ZC Switch", WM8955_MONOOUT_VOLUME, 7, 1, 0), +}; + +static const struct snd_kcontrol_new lmixer[] = { +SOC_DAPM_SINGLE("Playback Switch", WM8955_LEFT_OUT_MIX_1, 8, 1, 0), +SOC_DAPM_SINGLE("Bypass Switch", WM8955_LEFT_OUT_MIX_1, 7, 1, 0), +SOC_DAPM_SINGLE("Right Playback Switch", WM8955_LEFT_OUT_MIX_2, 8, 1, 0), +SOC_DAPM_SINGLE("Mono Switch", WM8955_LEFT_OUT_MIX_2, 7, 1, 0), +}; + +static const struct snd_kcontrol_new rmixer[] = { +SOC_DAPM_SINGLE("Left Playback Switch", WM8955_RIGHT_OUT_MIX_1, 8, 1, 0), +SOC_DAPM_SINGLE("Mono Switch", WM8955_RIGHT_OUT_MIX_1, 7, 1, 0), +SOC_DAPM_SINGLE("Playback Switch", WM8955_RIGHT_OUT_MIX_2, 8, 1, 0), +SOC_DAPM_SINGLE("Bypass Switch", WM8955_RIGHT_OUT_MIX_2, 7, 1, 0), +}; + +static const struct snd_kcontrol_new mmixer[] = { +SOC_DAPM_SINGLE("Left Playback Switch", WM8955_MONO_OUT_MIX_1, 8, 1, 0), +SOC_DAPM_SINGLE("Left Bypass Switch", WM8955_MONO_OUT_MIX_1, 7, 1, 0), +SOC_DAPM_SINGLE("Right Playback Switch", WM8955_MONO_OUT_MIX_2, 8, 1, 0), +SOC_DAPM_SINGLE("Right Bypass Switch", WM8955_MONO_OUT_MIX_2, 7, 1, 0), +}; + +static const struct snd_soc_dapm_widget wm8955_dapm_widgets[] = { +SND_SOC_DAPM_INPUT("MONOIN-"), +SND_SOC_DAPM_INPUT("MONOIN+"), +SND_SOC_DAPM_INPUT("LINEINR"), +SND_SOC_DAPM_INPUT("LINEINL"), + +SND_SOC_DAPM_PGA("Mono Input", SND_SOC_NOPM, 0, 0, NULL, 0), + +SND_SOC_DAPM_SUPPLY("SYSCLK", WM8955_POWER_MANAGEMENT_1, 0, 1, wm8955_sysclk, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD), +SND_SOC_DAPM_SUPPLY("TSDEN", WM8955_ADDITIONAL_CONTROL_1, 8, 0, NULL, 0), + +SND_SOC_DAPM_DAC("DACL", "Playback", WM8955_POWER_MANAGEMENT_2, 8, 0), +SND_SOC_DAPM_DAC("DACR", "Playback", WM8955_POWER_MANAGEMENT_2, 7, 0), + +SND_SOC_DAPM_PGA("LOUT1 PGA", WM8955_POWER_MANAGEMENT_2, 6, 0, NULL, 0), +SND_SOC_DAPM_PGA("ROUT1 PGA", WM8955_POWER_MANAGEMENT_2, 5, 0, NULL, 0), +SND_SOC_DAPM_PGA("LOUT2 PGA", WM8955_POWER_MANAGEMENT_2, 4, 0, NULL, 0), +SND_SOC_DAPM_PGA("ROUT2 PGA", WM8955_POWER_MANAGEMENT_2, 3, 0, NULL, 0), +SND_SOC_DAPM_PGA("MOUT PGA", WM8955_POWER_MANAGEMENT_2, 2, 0, NULL, 0), +SND_SOC_DAPM_PGA("OUT3 PGA", WM8955_POWER_MANAGEMENT_2, 1, 0, NULL, 0), + +/* The names are chosen to make the control names nice */ +SND_SOC_DAPM_MIXER("Left", SND_SOC_NOPM, 0, 0, + lmixer, ARRAY_SIZE(lmixer)), +SND_SOC_DAPM_MIXER("Right", SND_SOC_NOPM, 0, 0, + rmixer, ARRAY_SIZE(rmixer)), +SND_SOC_DAPM_MIXER("Mono", SND_SOC_NOPM, 0, 0, + mmixer, ARRAY_SIZE(mmixer)), + +SND_SOC_DAPM_OUTPUT("LOUT1"), +SND_SOC_DAPM_OUTPUT("ROUT1"), +SND_SOC_DAPM_OUTPUT("LOUT2"), +SND_SOC_DAPM_OUTPUT("ROUT2"), +SND_SOC_DAPM_OUTPUT("MONOOUT"), +SND_SOC_DAPM_OUTPUT("OUT3"), +}; + +static const struct snd_soc_dapm_route wm8955_intercon[] = { + { "DACL", NULL, "SYSCLK" }, + { "DACR", NULL, "SYSCLK" }, + + { "Mono Input", NULL, "MONOIN-" }, + { "Mono Input", NULL, "MONOIN+" }, + + { "Left", "Playback Switch", "DACL" }, + { "Left", "Right Playback Switch", "DACR" }, + { "Left", "Bypass Switch", "LINEINL" }, + { "Left", "Mono Switch", "Mono Input" }, + + { "Right", "Playback Switch", "DACR" }, + { "Right", "Left Playback Switch", "DACL" }, + { "Right", "Bypass Switch", "LINEINR" }, + { "Right", "Mono Switch", "Mono Input" }, + + { "Mono", "Left Playback Switch", "DACL" }, + { "Mono", "Right Playback Switch", "DACR" }, + { "Mono", "Left Bypass Switch", "LINEINL" }, + { "Mono", "Right Bypass Switch", "LINEINR" }, + + { "LOUT1 PGA", NULL, "Left" }, + { "LOUT1", NULL, "TSDEN" }, + { "LOUT1", NULL, "LOUT1 PGA" }, + + { "ROUT1 PGA", NULL, "Right" }, + { "ROUT1", NULL, "TSDEN" }, + { "ROUT1", NULL, "ROUT1 PGA" }, + + { "LOUT2 PGA", NULL, "Left" }, + { "LOUT2", NULL, "TSDEN" }, + { "LOUT2", NULL, "LOUT2 PGA" }, + + { "ROUT2 PGA", NULL, "Right" }, + { "ROUT2", NULL, "TSDEN" }, + { "ROUT2", NULL, "ROUT2 PGA" }, + + { "MOUT PGA", NULL, "Mono" }, + { "MONOOUT", NULL, "MOUT PGA" }, + + /* OUT3 not currently implemented */ + { "OUT3", NULL, "OUT3 PGA" }, +}; + +static int wm8955_add_widgets(struct snd_soc_codec *codec) +{ + snd_soc_add_controls(codec, wm8955_snd_controls, + ARRAY_SIZE(wm8955_snd_controls)); + + snd_soc_dapm_new_controls(codec, wm8955_dapm_widgets, + ARRAY_SIZE(wm8955_dapm_widgets)); + + snd_soc_dapm_add_routes(codec, wm8955_intercon, + ARRAY_SIZE(wm8955_intercon)); + + return 0; +} + +static int wm8955_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_codec *codec = dai->codec; + struct wm8955_priv *wm8955 = codec->private_data; + int ret; + int wl; + + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + wl = 0; + break; + case SNDRV_PCM_FORMAT_S20_3LE: + wl = 0x4; + break; + case SNDRV_PCM_FORMAT_S24_LE: + wl = 0x8; + break; + case SNDRV_PCM_FORMAT_S32_LE: + wl = 0xc; + break; + default: + return -EINVAL; + } + snd_soc_update_bits(codec, WM8955_AUDIO_INTERFACE, + WM8955_WL_MASK, wl); + + wm8955->fs = params_rate(params); + wm8955_set_deemph(codec); + + /* If the chip is clocked then disable the clocks and force a + * reconfiguration, otherwise DAPM will power up the + * clocks for us later. */ + ret = snd_soc_read(codec, WM8955_POWER_MANAGEMENT_1); + if (ret < 0) + return ret; + if (ret & WM8955_DIGENB) { + snd_soc_update_bits(codec, WM8955_POWER_MANAGEMENT_1, + WM8955_DIGENB, 0); + snd_soc_update_bits(codec, WM8955_CLOCKING_PLL, + WM8955_PLL_RB | WM8955_PLLEN, 0); + + wm8955_configure_clocking(codec); + } + + return 0; +} + + +static int wm8955_set_sysclk(struct snd_soc_dai *dai, int clk_id, + unsigned int freq, int dir) +{ + struct snd_soc_codec *codec = dai->codec; + struct wm8955_priv *priv = codec->private_data; + int div; + + switch (clk_id) { + case WM8955_CLK_MCLK: + if (freq > 15000000) { + priv->mclk_rate = freq /= 2; + div = WM8955_MCLKDIV2; + } else { + priv->mclk_rate = freq; + div = 0; + } + + snd_soc_update_bits(codec, WM8955_SAMPLE_RATE, + WM8955_MCLKDIV2, div); + break; + + default: + return -EINVAL; + } + + dev_dbg(dai->dev, "Clock source is %d at %uHz\n", clk_id, freq); + + return 0; +} + +static int wm8955_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) +{ + struct snd_soc_codec *codec = dai->codec; + u16 aif = 0; + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBS_CFS: + break; + case SND_SOC_DAIFMT_CBM_CFM: + aif |= WM8955_MS; + break; + default: + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_DSP_B: + aif |= WM8955_LRP; + case SND_SOC_DAIFMT_DSP_A: + aif |= 0x3; + break; + case SND_SOC_DAIFMT_I2S: + aif |= 0x2; + break; + case SND_SOC_DAIFMT_RIGHT_J: + break; + case SND_SOC_DAIFMT_LEFT_J: + aif |= 0x1; + break; + default: + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_DSP_A: + case SND_SOC_DAIFMT_DSP_B: + /* frame inversion not valid for DSP modes */ + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + case SND_SOC_DAIFMT_IB_NF: + aif |= WM8955_BCLKINV; + break; + default: + return -EINVAL; + } + break; + + case SND_SOC_DAIFMT_I2S: + case SND_SOC_DAIFMT_RIGHT_J: + case SND_SOC_DAIFMT_LEFT_J: + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + case SND_SOC_DAIFMT_IB_IF: + aif |= WM8955_BCLKINV | WM8955_LRP; + break; + case SND_SOC_DAIFMT_IB_NF: + aif |= WM8955_BCLKINV; + break; + case SND_SOC_DAIFMT_NB_IF: + aif |= WM8955_LRP; + break; + default: + return -EINVAL; + } + break; + default: + return -EINVAL; + } + + snd_soc_update_bits(codec, WM8955_AUDIO_INTERFACE, + WM8955_MS | WM8955_FORMAT_MASK | WM8955_BCLKINV | + WM8955_LRP, aif); + + return 0; +} + + +static int wm8955_digital_mute(struct snd_soc_dai *codec_dai, int mute) +{ + struct snd_soc_codec *codec = codec_dai->codec; + int val; + + if (mute) + val = WM8955_DACMU; + else + val = 0; + + snd_soc_update_bits(codec, WM8955_DAC_CONTROL, WM8955_DACMU, val); + + return 0; +} + +static int wm8955_set_bias_level(struct snd_soc_codec *codec, + enum snd_soc_bias_level level) +{ + struct wm8955_priv *wm8955 = codec->private_data; + int ret, i; + + switch (level) { + case SND_SOC_BIAS_ON: + break; + + case SND_SOC_BIAS_PREPARE: + /* VMID resistance 2*50k */ + snd_soc_update_bits(codec, WM8955_POWER_MANAGEMENT_1, + WM8955_VMIDSEL_MASK, + 0x1 << WM8955_VMIDSEL_SHIFT); + + /* Default bias current */ + snd_soc_update_bits(codec, WM8955_ADDITIONAL_CONTROL_1, + WM8955_VSEL_MASK, + 0x2 << WM8955_VSEL_SHIFT); + break; + + case SND_SOC_BIAS_STANDBY: + if (codec->bias_level == SND_SOC_BIAS_OFF) { + ret = regulator_bulk_enable(ARRAY_SIZE(wm8955->supplies), + wm8955->supplies); + if (ret != 0) { + dev_err(codec->dev, + "Failed to enable supplies: %d\n", + ret); + return ret; + } + + /* Sync back cached values if they're + * different from the hardware default. + */ + for (i = 0; i < ARRAY_SIZE(wm8955->reg_cache); i++) { + if (i == WM8955_RESET) + continue; + + if (wm8955->reg_cache[i] == wm8955_reg[i]) + continue; + + snd_soc_write(codec, i, wm8955->reg_cache[i]); + } + + /* Enable VREF and VMID */ + snd_soc_update_bits(codec, WM8955_POWER_MANAGEMENT_1, + WM8955_VREF | + WM8955_VMIDSEL_MASK, + WM8955_VREF | + 0x3 << WM8955_VREF_SHIFT); + + /* Let VMID ramp */ + msleep(500); + + /* High resistance VROI to maintain outputs */ + snd_soc_update_bits(codec, + WM8955_ADDITIONAL_CONTROL_3, + WM8955_VROI, WM8955_VROI); + } + + /* Maintain VMID with 2*250k */ + snd_soc_update_bits(codec, WM8955_POWER_MANAGEMENT_1, + WM8955_VMIDSEL_MASK, + 0x2 << WM8955_VMIDSEL_SHIFT); + + /* Minimum bias current */ + snd_soc_update_bits(codec, WM8955_ADDITIONAL_CONTROL_1, + WM8955_VSEL_MASK, 0); + break; + + case SND_SOC_BIAS_OFF: + /* Low resistance VROI to help discharge */ + snd_soc_update_bits(codec, + WM8955_ADDITIONAL_CONTROL_3, + WM8955_VROI, 0); + + /* Turn off VMID and VREF */ + snd_soc_update_bits(codec, WM8955_POWER_MANAGEMENT_1, + WM8955_VREF | + WM8955_VMIDSEL_MASK, 0); + + regulator_bulk_disable(ARRAY_SIZE(wm8955->supplies), + wm8955->supplies); + break; + } + codec->bias_level = level; + return 0; +} + +#define WM8955_RATES SNDRV_PCM_RATE_8000_96000 + +#define WM8955_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\ + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) + +static struct snd_soc_dai_ops wm8955_dai_ops = { + .set_sysclk = wm8955_set_sysclk, + .set_fmt = wm8955_set_fmt, + .hw_params = wm8955_hw_params, + .digital_mute = wm8955_digital_mute, +}; + +struct snd_soc_dai wm8955_dai = { + .name = "WM8955", + .playback = { + .stream_name = "Playback", + .channels_min = 2, + .channels_max = 2, + .rates = WM8955_RATES, + .formats = WM8955_FORMATS, + }, + .ops = &wm8955_dai_ops, +}; +EXPORT_SYMBOL_GPL(wm8955_dai); + +#ifdef CONFIG_PM +static int wm8955_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = socdev->card->codec; + + wm8955_set_bias_level(codec, SND_SOC_BIAS_OFF); + + return 0; +} + +static int wm8955_resume(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = socdev->card->codec; + + wm8955_set_bias_level(codec, SND_SOC_BIAS_STANDBY); + + return 0; +} +#else +#define wm8955_suspend NULL +#define wm8955_resume NULL +#endif + +static int wm8955_probe(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec; + int ret = 0; + + if (wm8955_codec == NULL) { + dev_err(&pdev->dev, "Codec device not registered\n"); + return -ENODEV; + } + + socdev->card->codec = wm8955_codec; + codec = wm8955_codec; + + /* register pcms */ + ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); + if (ret < 0) { + dev_err(codec->dev, "failed to create pcms: %d\n", ret); + goto pcm_err; + } + + wm8955_add_widgets(codec); + + return ret; + +pcm_err: + return ret; +} + +static int wm8955_remove(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + + snd_soc_free_pcms(socdev); + snd_soc_dapm_free(socdev); + + return 0; +} + +struct snd_soc_codec_device soc_codec_dev_wm8955 = { + .probe = wm8955_probe, + .remove = wm8955_remove, + .suspend = wm8955_suspend, + .resume = wm8955_resume, +}; +EXPORT_SYMBOL_GPL(soc_codec_dev_wm8955); + +static int wm8955_register(struct wm8955_priv *wm8955, + enum snd_soc_control_type control) +{ + int ret; + struct snd_soc_codec *codec = &wm8955->codec; + int i; + + if (wm8955_codec) { + dev_err(codec->dev, "Another WM8955 is registered\n"); + return -EINVAL; + } + + mutex_init(&codec->mutex); + INIT_LIST_HEAD(&codec->dapm_widgets); + INIT_LIST_HEAD(&codec->dapm_paths); + + codec->private_data = wm8955; + codec->name = "WM8955"; + codec->owner = THIS_MODULE; + codec->bias_level = SND_SOC_BIAS_OFF; + codec->set_bias_level = wm8955_set_bias_level; + codec->dai = &wm8955_dai; + codec->num_dai = 1; + codec->reg_cache_size = WM8955_MAX_REGISTER; + codec->reg_cache = &wm8955->reg_cache; + + memcpy(codec->reg_cache, wm8955_reg, sizeof(wm8955_reg)); + + ret = snd_soc_codec_set_cache_io(codec, 7, 9, control); + if (ret != 0) { + dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret); + goto err; + } + + for (i = 0; i < ARRAY_SIZE(wm8955->supplies); i++) + wm8955->supplies[i].supply = wm8955_supply_names[i]; + + ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(wm8955->supplies), + wm8955->supplies); + if (ret != 0) { + dev_err(codec->dev, "Failed to request supplies: %d\n", ret); + goto err; + } + + ret = regulator_bulk_enable(ARRAY_SIZE(wm8955->supplies), + wm8955->supplies); + if (ret != 0) { + dev_err(codec->dev, "Failed to enable supplies: %d\n", ret); + goto err_get; + } + + ret = wm8955_reset(codec); + if (ret < 0) { + dev_err(codec->dev, "Failed to issue reset: %d\n", ret); + goto err_enable; + } + + wm8955_dai.dev = codec->dev; + + /* Change some default settings - latch VU and enable ZC */ + wm8955->reg_cache[WM8955_LEFT_DAC_VOLUME] |= WM8955_LDVU; + wm8955->reg_cache[WM8955_RIGHT_DAC_VOLUME] |= WM8955_RDVU; + wm8955->reg_cache[WM8955_LOUT1_VOLUME] |= WM8955_LO1VU | WM8955_LO1ZC; + wm8955->reg_cache[WM8955_ROUT1_VOLUME] |= WM8955_RO1VU | WM8955_RO1ZC; + wm8955->reg_cache[WM8955_LOUT2_VOLUME] |= WM8955_LO2VU | WM8955_LO2ZC; + wm8955->reg_cache[WM8955_ROUT2_VOLUME] |= WM8955_RO2VU | WM8955_RO2ZC; + wm8955->reg_cache[WM8955_MONOOUT_VOLUME] |= WM8955_MOZC; + + /* Also enable adaptive bass boost by default */ + wm8955->reg_cache[WM8955_BASS_CONTROL] |= WM8955_BB; + + /* Set platform data values */ + if (wm8955->pdata) { + if (wm8955->pdata->out2_speaker) + wm8955->reg_cache[WM8955_ADDITIONAL_CONTROL_2] + |= WM8955_ROUT2INV; + + if (wm8955->pdata->monoin_diff) + wm8955->reg_cache[WM8955_MONO_OUT_MIX_1] + |= WM8955_DMEN; + } + + wm8955_set_bias_level(codec, SND_SOC_BIAS_STANDBY); + + /* Bias level configuration will have done an extra enable */ + regulator_bulk_disable(ARRAY_SIZE(wm8955->supplies), wm8955->supplies); + + wm8955_codec = codec; + + ret = snd_soc_register_codec(codec); + if (ret != 0) { + dev_err(codec->dev, "Failed to register codec: %d\n", ret); + return ret; + } + + ret = snd_soc_register_dai(&wm8955_dai); + if (ret != 0) { + dev_err(codec->dev, "Failed to register DAI: %d\n", ret); + snd_soc_unregister_codec(codec); + return ret; + } + + return 0; + +err_enable: + regulator_bulk_disable(ARRAY_SIZE(wm8955->supplies), wm8955->supplies); +err_get: + regulator_bulk_free(ARRAY_SIZE(wm8955->supplies), wm8955->supplies); +err: + kfree(wm8955); + return ret; +} + +static void wm8955_unregister(struct wm8955_priv *wm8955) +{ + wm8955_set_bias_level(&wm8955->codec, SND_SOC_BIAS_OFF); + regulator_bulk_free(ARRAY_SIZE(wm8955->supplies), wm8955->supplies); + snd_soc_unregister_dai(&wm8955_dai); + snd_soc_unregister_codec(&wm8955->codec); + kfree(wm8955); + wm8955_codec = NULL; +} + +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) +static __devinit int wm8955_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct wm8955_priv *wm8955; + struct snd_soc_codec *codec; + + wm8955 = kzalloc(sizeof(struct wm8955_priv), GFP_KERNEL); + if (wm8955 == NULL) + return -ENOMEM; + + codec = &wm8955->codec; + codec->hw_write = (hw_write_t)i2c_master_send; + + i2c_set_clientdata(i2c, wm8955); + codec->control_data = i2c; + wm8955->pdata = i2c->dev.platform_data; + + codec->dev = &i2c->dev; + + return wm8955_register(wm8955, SND_SOC_I2C); +} + +static __devexit int wm8955_i2c_remove(struct i2c_client *client) +{ + struct wm8955_priv *wm8955 = i2c_get_clientdata(client); + wm8955_unregister(wm8955); + return 0; +} + +static const struct i2c_device_id wm8955_i2c_id[] = { + { "wm8955", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, wm8955_i2c_id); + +static struct i2c_driver wm8955_i2c_driver = { + .driver = { + .name = "wm8955", + .owner = THIS_MODULE, + }, + .probe = wm8955_i2c_probe, + .remove = __devexit_p(wm8955_i2c_remove), + .id_table = wm8955_i2c_id, +}; +#endif + +static int __init wm8955_modinit(void) +{ + int ret; +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + ret = i2c_add_driver(&wm8955_i2c_driver); + if (ret != 0) { + printk(KERN_ERR "Failed to register WM8955 I2C driver: %d\n", + ret); + } +#endif + return 0; +} +module_init(wm8955_modinit); + +static void __exit wm8955_exit(void) +{ +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + i2c_del_driver(&wm8955_i2c_driver); +#endif +} +module_exit(wm8955_exit); + +MODULE_DESCRIPTION("ASoC WM8955 driver"); +MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/wm8955.h b/sound/soc/codecs/wm8955.h new file mode 100644 index 0000000..ae349c8 --- /dev/null +++ b/sound/soc/codecs/wm8955.h @@ -0,0 +1,489 @@ +/* + * wm8955.h -- WM8904 ASoC driver + * + * Copyright 2009 Wolfson Microelectronics, plc + * + * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _WM8955_H +#define _WM8955_H + +#define WM8955_CLK_MCLK 1 + +extern struct snd_soc_dai wm8955_dai; +extern struct snd_soc_codec_device soc_codec_dev_wm8955; + +/* + * Register values. + */ +#define WM8955_LOUT1_VOLUME 0x02 +#define WM8955_ROUT1_VOLUME 0x03 +#define WM8955_DAC_CONTROL 0x05 +#define WM8955_AUDIO_INTERFACE 0x07 +#define WM8955_SAMPLE_RATE 0x08 +#define WM8955_LEFT_DAC_VOLUME 0x0A +#define WM8955_RIGHT_DAC_VOLUME 0x0B +#define WM8955_BASS_CONTROL 0x0C +#define WM8955_TREBLE_CONTROL 0x0D +#define WM8955_RESET 0x0F +#define WM8955_ADDITIONAL_CONTROL_1 0x17 +#define WM8955_ADDITIONAL_CONTROL_2 0x18 +#define WM8955_POWER_MANAGEMENT_1 0x19 +#define WM8955_POWER_MANAGEMENT_2 0x1A +#define WM8955_ADDITIONAL_CONTROL_3 0x1B +#define WM8955_LEFT_OUT_MIX_1 0x22 +#define WM8955_LEFT_OUT_MIX_2 0x23 +#define WM8955_RIGHT_OUT_MIX_1 0x24 +#define WM8955_RIGHT_OUT_MIX_2 0x25 +#define WM8955_MONO_OUT_MIX_1 0x26 +#define WM8955_MONO_OUT_MIX_2 0x27 +#define WM8955_LOUT2_VOLUME 0x28 +#define WM8955_ROUT2_VOLUME 0x29 +#define WM8955_MONOOUT_VOLUME 0x2A +#define WM8955_CLOCKING_PLL 0x2B +#define WM8955_PLL_CONTROL_1 0x2C +#define WM8955_PLL_CONTROL_2 0x2D +#define WM8955_PLL_CONTROL_3 0x2E +#define WM8955_PLL_CONTROL_4 0x3B + +#define WM8955_REGISTER_COUNT 29 +#define WM8955_MAX_REGISTER 0x3B + +/* + * Field Definitions. + */ + +/* + * R2 (0x02) - LOUT1 volume + */ +#define WM8955_LO1VU 0x0100 /* LO1VU */ +#define WM8955_LO1VU_MASK 0x0100 /* LO1VU */ +#define WM8955_LO1VU_SHIFT 8 /* LO1VU */ +#define WM8955_LO1VU_WIDTH 1 /* LO1VU */ +#define WM8955_LO1ZC 0x0080 /* LO1ZC */ +#define WM8955_LO1ZC_MASK 0x0080 /* LO1ZC */ +#define WM8955_LO1ZC_SHIFT 7 /* LO1ZC */ +#define WM8955_LO1ZC_WIDTH 1 /* LO1ZC */ +#define WM8955_LOUTVOL_MASK 0x007F /* LOUTVOL - [6:0] */ +#define WM8955_LOUTVOL_SHIFT 0 /* LOUTVOL - [6:0] */ +#define WM8955_LOUTVOL_WIDTH 7 /* LOUTVOL - [6:0] */ + +/* + * R3 (0x03) - ROUT1 volume + */ +#define WM8955_RO1VU 0x0100 /* RO1VU */ +#define WM8955_RO1VU_MASK 0x0100 /* RO1VU */ +#define WM8955_RO1VU_SHIFT 8 /* RO1VU */ +#define WM8955_RO1VU_WIDTH 1 /* RO1VU */ +#define WM8955_RO1ZC 0x0080 /* RO1ZC */ +#define WM8955_RO1ZC_MASK 0x0080 /* RO1ZC */ +#define WM8955_RO1ZC_SHIFT 7 /* RO1ZC */ +#define WM8955_RO1ZC_WIDTH 1 /* RO1ZC */ +#define WM8955_ROUTVOL_MASK 0x007F /* ROUTVOL - [6:0] */ +#define WM8955_ROUTVOL_SHIFT 0 /* ROUTVOL - [6:0] */ +#define WM8955_ROUTVOL_WIDTH 7 /* ROUTVOL - [6:0] */ + +/* + * R5 (0x05) - DAC Control + */ +#define WM8955_DAT 0x0080 /* DAT */ +#define WM8955_DAT_MASK 0x0080 /* DAT */ +#define WM8955_DAT_SHIFT 7 /* DAT */ +#define WM8955_DAT_WIDTH 1 /* DAT */ +#define WM8955_DACMU 0x0008 /* DACMU */ +#define WM8955_DACMU_MASK 0x0008 /* DACMU */ +#define WM8955_DACMU_SHIFT 3 /* DACMU */ +#define WM8955_DACMU_WIDTH 1 /* DACMU */ +#define WM8955_DEEMPH_MASK 0x0006 /* DEEMPH - [2:1] */ +#define WM8955_DEEMPH_SHIFT 1 /* DEEMPH - [2:1] */ +#define WM8955_DEEMPH_WIDTH 2 /* DEEMPH - [2:1] */ + +/* + * R7 (0x07) - Audio Interface + */ +#define WM8955_BCLKINV 0x0080 /* BCLKINV */ +#define WM8955_BCLKINV_MASK 0x0080 /* BCLKINV */ +#define WM8955_BCLKINV_SHIFT 7 /* BCLKINV */ +#define WM8955_BCLKINV_WIDTH 1 /* BCLKINV */ +#define WM8955_MS 0x0040 /* MS */ +#define WM8955_MS_MASK 0x0040 /* MS */ +#define WM8955_MS_SHIFT 6 /* MS */ +#define WM8955_MS_WIDTH 1 /* MS */ +#define WM8955_LRSWAP 0x0020 /* LRSWAP */ +#define WM8955_LRSWAP_MASK 0x0020 /* LRSWAP */ +#define WM8955_LRSWAP_SHIFT 5 /* LRSWAP */ +#define WM8955_LRSWAP_WIDTH 1 /* LRSWAP */ +#define WM8955_LRP 0x0010 /* LRP */ +#define WM8955_LRP_MASK 0x0010 /* LRP */ +#define WM8955_LRP_SHIFT 4 /* LRP */ +#define WM8955_LRP_WIDTH 1 /* LRP */ +#define WM8955_WL_MASK 0x000C /* WL - [3:2] */ +#define WM8955_WL_SHIFT 2 /* WL - [3:2] */ +#define WM8955_WL_WIDTH 2 /* WL - [3:2] */ +#define WM8955_FORMAT_MASK 0x0003 /* FORMAT - [1:0] */ +#define WM8955_FORMAT_SHIFT 0 /* FORMAT - [1:0] */ +#define WM8955_FORMAT_WIDTH 2 /* FORMAT - [1:0] */ + +/* + * R8 (0x08) - Sample Rate + */ +#define WM8955_BCLKDIV2 0x0080 /* BCLKDIV2 */ +#define WM8955_BCLKDIV2_MASK 0x0080 /* BCLKDIV2 */ +#define WM8955_BCLKDIV2_SHIFT 7 /* BCLKDIV2 */ +#define WM8955_BCLKDIV2_WIDTH 1 /* BCLKDIV2 */ +#define WM8955_MCLKDIV2 0x0040 /* MCLKDIV2 */ +#define WM8955_MCLKDIV2_MASK 0x0040 /* MCLKDIV2 */ +#define WM8955_MCLKDIV2_SHIFT 6 /* MCLKDIV2 */ +#define WM8955_MCLKDIV2_WIDTH 1 /* MCLKDIV2 */ +#define WM8955_SR_MASK 0x003E /* SR - [5:1] */ +#define WM8955_SR_SHIFT 1 /* SR - [5:1] */ +#define WM8955_SR_WIDTH 5 /* SR - [5:1] */ +#define WM8955_USB 0x0001 /* USB */ +#define WM8955_USB_MASK 0x0001 /* USB */ +#define WM8955_USB_SHIFT 0 /* USB */ +#define WM8955_USB_WIDTH 1 /* USB */ + +/* + * R10 (0x0A) - Left DAC volume + */ +#define WM8955_LDVU 0x0100 /* LDVU */ +#define WM8955_LDVU_MASK 0x0100 /* LDVU */ +#define WM8955_LDVU_SHIFT 8 /* LDVU */ +#define WM8955_LDVU_WIDTH 1 /* LDVU */ +#define WM8955_LDACVOL_MASK 0x00FF /* LDACVOL - [7:0] */ +#define WM8955_LDACVOL_SHIFT 0 /* LDACVOL - [7:0] */ +#define WM8955_LDACVOL_WIDTH 8 /* LDACVOL - [7:0] */ + +/* + * R11 (0x0B) - Right DAC volume + */ +#define WM8955_RDVU 0x0100 /* RDVU */ +#define WM8955_RDVU_MASK 0x0100 /* RDVU */ +#define WM8955_RDVU_SHIFT 8 /* RDVU */ +#define WM8955_RDVU_WIDTH 1 /* RDVU */ +#define WM8955_RDACVOL_MASK 0x00FF /* RDACVOL - [7:0] */ +#define WM8955_RDACVOL_SHIFT 0 /* RDACVOL - [7:0] */ +#define WM8955_RDACVOL_WIDTH 8 /* RDACVOL - [7:0] */ + +/* + * R12 (0x0C) - Bass control + */ +#define WM8955_BB 0x0080 /* BB */ +#define WM8955_BB_MASK 0x0080 /* BB */ +#define WM8955_BB_SHIFT 7 /* BB */ +#define WM8955_BB_WIDTH 1 /* BB */ +#define WM8955_BC 0x0040 /* BC */ +#define WM8955_BC_MASK 0x0040 /* BC */ +#define WM8955_BC_SHIFT 6 /* BC */ +#define WM8955_BC_WIDTH 1 /* BC */ +#define WM8955_BASS_MASK 0x000F /* BASS - [3:0] */ +#define WM8955_BASS_SHIFT 0 /* BASS - [3:0] */ +#define WM8955_BASS_WIDTH 4 /* BASS - [3:0] */ + +/* + * R13 (0x0D) - Treble control + */ +#define WM8955_TC 0x0040 /* TC */ +#define WM8955_TC_MASK 0x0040 /* TC */ +#define WM8955_TC_SHIFT 6 /* TC */ +#define WM8955_TC_WIDTH 1 /* TC */ +#define WM8955_TRBL_MASK 0x000F /* TRBL - [3:0] */ +#define WM8955_TRBL_SHIFT 0 /* TRBL - [3:0] */ +#define WM8955_TRBL_WIDTH 4 /* TRBL - [3:0] */ + +/* + * R15 (0x0F) - Reset + */ +#define WM8955_RESET_MASK 0x01FF /* RESET - [8:0] */ +#define WM8955_RESET_SHIFT 0 /* RESET - [8:0] */ +#define WM8955_RESET_WIDTH 9 /* RESET - [8:0] */ + +/* + * R23 (0x17) - Additional control (1) + */ +#define WM8955_TSDEN 0x0100 /* TSDEN */ +#define WM8955_TSDEN_MASK 0x0100 /* TSDEN */ +#define WM8955_TSDEN_SHIFT 8 /* TSDEN */ +#define WM8955_TSDEN_WIDTH 1 /* TSDEN */ +#define WM8955_VSEL_MASK 0x00C0 /* VSEL - [7:6] */ +#define WM8955_VSEL_SHIFT 6 /* VSEL - [7:6] */ +#define WM8955_VSEL_WIDTH 2 /* VSEL - [7:6] */ +#define WM8955_DMONOMIX_MASK 0x0030 /* DMONOMIX - [5:4] */ +#define WM8955_DMONOMIX_SHIFT 4 /* DMONOMIX - [5:4] */ +#define WM8955_DMONOMIX_WIDTH 2 /* DMONOMIX - [5:4] */ +#define WM8955_DACINV 0x0002 /* DACINV */ +#define WM8955_DACINV_MASK 0x0002 /* DACINV */ +#define WM8955_DACINV_SHIFT 1 /* DACINV */ +#define WM8955_DACINV_WIDTH 1 /* DACINV */ +#define WM8955_TOEN 0x0001 /* TOEN */ +#define WM8955_TOEN_MASK 0x0001 /* TOEN */ +#define WM8955_TOEN_SHIFT 0 /* TOEN */ +#define WM8955_TOEN_WIDTH 1 /* TOEN */ + +/* + * R24 (0x18) - Additional control (2) + */ +#define WM8955_OUT3SW_MASK 0x0180 /* OUT3SW - [8:7] */ +#define WM8955_OUT3SW_SHIFT 7 /* OUT3SW - [8:7] */ +#define WM8955_OUT3SW_WIDTH 2 /* OUT3SW - [8:7] */ +#define WM8955_ROUT2INV 0x0010 /* ROUT2INV */ +#define WM8955_ROUT2INV_MASK 0x0010 /* ROUT2INV */ +#define WM8955_ROUT2INV_SHIFT 4 /* ROUT2INV */ +#define WM8955_ROUT2INV_WIDTH 1 /* ROUT2INV */ +#define WM8955_DACOSR 0x0001 /* DACOSR */ +#define WM8955_DACOSR_MASK 0x0001 /* DACOSR */ +#define WM8955_DACOSR_SHIFT 0 /* DACOSR */ +#define WM8955_DACOSR_WIDTH 1 /* DACOSR */ + +/* + * R25 (0x19) - Power Management (1) + */ +#define WM8955_VMIDSEL_MASK 0x0180 /* VMIDSEL - [8:7] */ +#define WM8955_VMIDSEL_SHIFT 7 /* VMIDSEL - [8:7] */ +#define WM8955_VMIDSEL_WIDTH 2 /* VMIDSEL - [8:7] */ +#define WM8955_VREF 0x0040 /* VREF */ +#define WM8955_VREF_MASK 0x0040 /* VREF */ +#define WM8955_VREF_SHIFT 6 /* VREF */ +#define WM8955_VREF_WIDTH 1 /* VREF */ +#define WM8955_DIGENB 0x0001 /* DIGENB */ +#define WM8955_DIGENB_MASK 0x0001 /* DIGENB */ +#define WM8955_DIGENB_SHIFT 0 /* DIGENB */ +#define WM8955_DIGENB_WIDTH 1 /* DIGENB */ + +/* + * R26 (0x1A) - Power Management (2) + */ +#define WM8955_DACL 0x0100 /* DACL */ +#define WM8955_DACL_MASK 0x0100 /* DACL */ +#define WM8955_DACL_SHIFT 8 /* DACL */ +#define WM8955_DACL_WIDTH 1 /* DACL */ +#define WM8955_DACR 0x0080 /* DACR */ +#define WM8955_DACR_MASK 0x0080 /* DACR */ +#define WM8955_DACR_SHIFT 7 /* DACR */ +#define WM8955_DACR_WIDTH 1 /* DACR */ +#define WM8955_LOUT1 0x0040 /* LOUT1 */ +#define WM8955_LOUT1_MASK 0x0040 /* LOUT1 */ +#define WM8955_LOUT1_SHIFT 6 /* LOUT1 */ +#define WM8955_LOUT1_WIDTH 1 /* LOUT1 */ +#define WM8955_ROUT1 0x0020 /* ROUT1 */ +#define WM8955_ROUT1_MASK 0x0020 /* ROUT1 */ +#define WM8955_ROUT1_SHIFT 5 /* ROUT1 */ +#define WM8955_ROUT1_WIDTH 1 /* ROUT1 */ +#define WM8955_LOUT2 0x0010 /* LOUT2 */ +#define WM8955_LOUT2_MASK 0x0010 /* LOUT2 */ +#define WM8955_LOUT2_SHIFT 4 /* LOUT2 */ +#define WM8955_LOUT2_WIDTH 1 /* LOUT2 */ +#define WM8955_ROUT2 0x0008 /* ROUT2 */ +#define WM8955_ROUT2_MASK 0x0008 /* ROUT2 */ +#define WM8955_ROUT2_SHIFT 3 /* ROUT2 */ +#define WM8955_ROUT2_WIDTH 1 /* ROUT2 */ +#define WM8955_MONO 0x0004 /* MONO */ +#define WM8955_MONO_MASK 0x0004 /* MONO */ +#define WM8955_MONO_SHIFT 2 /* MONO */ +#define WM8955_MONO_WIDTH 1 /* MONO */ +#define WM8955_OUT3 0x0002 /* OUT3 */ +#define WM8955_OUT3_MASK 0x0002 /* OUT3 */ +#define WM8955_OUT3_SHIFT 1 /* OUT3 */ +#define WM8955_OUT3_WIDTH 1 /* OUT3 */ + +/* + * R27 (0x1B) - Additional Control (3) + */ +#define WM8955_VROI 0x0040 /* VROI */ +#define WM8955_VROI_MASK 0x0040 /* VROI */ +#define WM8955_VROI_SHIFT 6 /* VROI */ +#define WM8955_VROI_WIDTH 1 /* VROI */ + +/* + * R34 (0x22) - Left out Mix (1) + */ +#define WM8955_LD2LO 0x0100 /* LD2LO */ +#define WM8955_LD2LO_MASK 0x0100 /* LD2LO */ +#define WM8955_LD2LO_SHIFT 8 /* LD2LO */ +#define WM8955_LD2LO_WIDTH 1 /* LD2LO */ +#define WM8955_LI2LO 0x0080 /* LI2LO */ +#define WM8955_LI2LO_MASK 0x0080 /* LI2LO */ +#define WM8955_LI2LO_SHIFT 7 /* LI2LO */ +#define WM8955_LI2LO_WIDTH 1 /* LI2LO */ +#define WM8955_LI2LOVOL_MASK 0x0070 /* LI2LOVOL - [6:4] */ +#define WM8955_LI2LOVOL_SHIFT 4 /* LI2LOVOL - [6:4] */ +#define WM8955_LI2LOVOL_WIDTH 3 /* LI2LOVOL - [6:4] */ + +/* + * R35 (0x23) - Left out Mix (2) + */ +#define WM8955_RD2LO 0x0100 /* RD2LO */ +#define WM8955_RD2LO_MASK 0x0100 /* RD2LO */ +#define WM8955_RD2LO_SHIFT 8 /* RD2LO */ +#define WM8955_RD2LO_WIDTH 1 /* RD2LO */ +#define WM8955_RI2LO 0x0080 /* RI2LO */ +#define WM8955_RI2LO_MASK 0x0080 /* RI2LO */ +#define WM8955_RI2LO_SHIFT 7 /* RI2LO */ +#define WM8955_RI2LO_WIDTH 1 /* RI2LO */ +#define WM8955_RI2LOVOL_MASK 0x0070 /* RI2LOVOL - [6:4] */ +#define WM8955_RI2LOVOL_SHIFT 4 /* RI2LOVOL - [6:4] */ +#define WM8955_RI2LOVOL_WIDTH 3 /* RI2LOVOL - [6:4] */ + +/* + * R36 (0x24) - Right out Mix (1) + */ +#define WM8955_LD2RO 0x0100 /* LD2RO */ +#define WM8955_LD2RO_MASK 0x0100 /* LD2RO */ +#define WM8955_LD2RO_SHIFT 8 /* LD2RO */ +#define WM8955_LD2RO_WIDTH 1 /* LD2RO */ +#define WM8955_LI2RO 0x0080 /* LI2RO */ +#define WM8955_LI2RO_MASK 0x0080 /* LI2RO */ +#define WM8955_LI2RO_SHIFT 7 /* LI2RO */ +#define WM8955_LI2RO_WIDTH 1 /* LI2RO */ +#define WM8955_LI2ROVOL_MASK 0x0070 /* LI2ROVOL - [6:4] */ +#define WM8955_LI2ROVOL_SHIFT 4 /* LI2ROVOL - [6:4] */ +#define WM8955_LI2ROVOL_WIDTH 3 /* LI2ROVOL - [6:4] */ + +/* + * R37 (0x25) - Right Out Mix (2) + */ +#define WM8955_RD2RO 0x0100 /* RD2RO */ +#define WM8955_RD2RO_MASK 0x0100 /* RD2RO */ +#define WM8955_RD2RO_SHIFT 8 /* RD2RO */ +#define WM8955_RD2RO_WIDTH 1 /* RD2RO */ +#define WM8955_RI2RO 0x0080 /* RI2RO */ +#define WM8955_RI2RO_MASK 0x0080 /* RI2RO */ +#define WM8955_RI2RO_SHIFT 7 /* RI2RO */ +#define WM8955_RI2RO_WIDTH 1 /* RI2RO */ +#define WM8955_RI2ROVOL_MASK 0x0070 /* RI2ROVOL - [6:4] */ +#define WM8955_RI2ROVOL_SHIFT 4 /* RI2ROVOL - [6:4] */ +#define WM8955_RI2ROVOL_WIDTH 3 /* RI2ROVOL - [6:4] */ + +/* + * R38 (0x26) - Mono out Mix (1) + */ +#define WM8955_LD2MO 0x0100 /* LD2MO */ +#define WM8955_LD2MO_MASK 0x0100 /* LD2MO */ +#define WM8955_LD2MO_SHIFT 8 /* LD2MO */ +#define WM8955_LD2MO_WIDTH 1 /* LD2MO */ +#define WM8955_LI2MO 0x0080 /* LI2MO */ +#define WM8955_LI2MO_MASK 0x0080 /* LI2MO */ +#define WM8955_LI2MO_SHIFT 7 /* LI2MO */ +#define WM8955_LI2MO_WIDTH 1 /* LI2MO */ +#define WM8955_LI2MOVOL_MASK 0x0070 /* LI2MOVOL - [6:4] */ +#define WM8955_LI2MOVOL_SHIFT 4 /* LI2MOVOL - [6:4] */ +#define WM8955_LI2MOVOL_WIDTH 3 /* LI2MOVOL - [6:4] */ +#define WM8955_DMEN 0x0001 /* DMEN */ +#define WM8955_DMEN_MASK 0x0001 /* DMEN */ +#define WM8955_DMEN_SHIFT 0 /* DMEN */ +#define WM8955_DMEN_WIDTH 1 /* DMEN */ + +/* + * R39 (0x27) - Mono out Mix (2) + */ +#define WM8955_RD2MO 0x0100 /* RD2MO */ +#define WM8955_RD2MO_MASK 0x0100 /* RD2MO */ +#define WM8955_RD2MO_SHIFT 8 /* RD2MO */ +#define WM8955_RD2MO_WIDTH 1 /* RD2MO */ +#define WM8955_RI2MO 0x0080 /* RI2MO */ +#define WM8955_RI2MO_MASK 0x0080 /* RI2MO */ +#define WM8955_RI2MO_SHIFT 7 /* RI2MO */ +#define WM8955_RI2MO_WIDTH 1 /* RI2MO */ +#define WM8955_RI2MOVOL_MASK 0x0070 /* RI2MOVOL - [6:4] */ +#define WM8955_RI2MOVOL_SHIFT 4 /* RI2MOVOL - [6:4] */ +#define WM8955_RI2MOVOL_WIDTH 3 /* RI2MOVOL - [6:4] */ + +/* + * R40 (0x28) - LOUT2 volume + */ +#define WM8955_LO2VU 0x0100 /* LO2VU */ +#define WM8955_LO2VU_MASK 0x0100 /* LO2VU */ +#define WM8955_LO2VU_SHIFT 8 /* LO2VU */ +#define WM8955_LO2VU_WIDTH 1 /* LO2VU */ +#define WM8955_LO2ZC 0x0080 /* LO2ZC */ +#define WM8955_LO2ZC_MASK 0x0080 /* LO2ZC */ +#define WM8955_LO2ZC_SHIFT 7 /* LO2ZC */ +#define WM8955_LO2ZC_WIDTH 1 /* LO2ZC */ +#define WM8955_LOUT2VOL_MASK 0x007F /* LOUT2VOL - [6:0] */ +#define WM8955_LOUT2VOL_SHIFT 0 /* LOUT2VOL - [6:0] */ +#define WM8955_LOUT2VOL_WIDTH 7 /* LOUT2VOL - [6:0] */ + +/* + * R41 (0x29) - ROUT2 volume + */ +#define WM8955_RO2VU 0x0100 /* RO2VU */ +#define WM8955_RO2VU_MASK 0x0100 /* RO2VU */ +#define WM8955_RO2VU_SHIFT 8 /* RO2VU */ +#define WM8955_RO2VU_WIDTH 1 /* RO2VU */ +#define WM8955_RO2ZC 0x0080 /* RO2ZC */ +#define WM8955_RO2ZC_MASK 0x0080 /* RO2ZC */ +#define WM8955_RO2ZC_SHIFT 7 /* RO2ZC */ +#define WM8955_RO2ZC_WIDTH 1 /* RO2ZC */ +#define WM8955_ROUT2VOL_MASK 0x007F /* ROUT2VOL - [6:0] */ +#define WM8955_ROUT2VOL_SHIFT 0 /* ROUT2VOL - [6:0] */ +#define WM8955_ROUT2VOL_WIDTH 7 /* ROUT2VOL - [6:0] */ + +/* + * R42 (0x2A) - MONOOUT volume + */ +#define WM8955_MOZC 0x0080 /* MOZC */ +#define WM8955_MOZC_MASK 0x0080 /* MOZC */ +#define WM8955_MOZC_SHIFT 7 /* MOZC */ +#define WM8955_MOZC_WIDTH 1 /* MOZC */ +#define WM8955_MOUTVOL_MASK 0x007F /* MOUTVOL - [6:0] */ +#define WM8955_MOUTVOL_SHIFT 0 /* MOUTVOL - [6:0] */ +#define WM8955_MOUTVOL_WIDTH 7 /* MOUTVOL - [6:0] */ + +/* + * R43 (0x2B) - Clocking / PLL + */ +#define WM8955_MCLKSEL 0x0100 /* MCLKSEL */ +#define WM8955_MCLKSEL_MASK 0x0100 /* MCLKSEL */ +#define WM8955_MCLKSEL_SHIFT 8 /* MCLKSEL */ +#define WM8955_MCLKSEL_WIDTH 1 /* MCLKSEL */ +#define WM8955_PLLOUTDIV2 0x0020 /* PLLOUTDIV2 */ +#define WM8955_PLLOUTDIV2_MASK 0x0020 /* PLLOUTDIV2 */ +#define WM8955_PLLOUTDIV2_SHIFT 5 /* PLLOUTDIV2 */ +#define WM8955_PLLOUTDIV2_WIDTH 1 /* PLLOUTDIV2 */ +#define WM8955_PLL_RB 0x0010 /* PLL_RB */ +#define WM8955_PLL_RB_MASK 0x0010 /* PLL_RB */ +#define WM8955_PLL_RB_SHIFT 4 /* PLL_RB */ +#define WM8955_PLL_RB_WIDTH 1 /* PLL_RB */ +#define WM8955_PLLEN 0x0008 /* PLLEN */ +#define WM8955_PLLEN_MASK 0x0008 /* PLLEN */ +#define WM8955_PLLEN_SHIFT 3 /* PLLEN */ +#define WM8955_PLLEN_WIDTH 1 /* PLLEN */ + +/* + * R44 (0x2C) - PLL Control 1 + */ +#define WM8955_N_MASK 0x01E0 /* N - [8:5] */ +#define WM8955_N_SHIFT 5 /* N - [8:5] */ +#define WM8955_N_WIDTH 4 /* N - [8:5] */ +#define WM8955_K_21_18_MASK 0x000F /* K(21:18) - [3:0] */ +#define WM8955_K_21_18_SHIFT 0 /* K(21:18) - [3:0] */ +#define WM8955_K_21_18_WIDTH 4 /* K(21:18) - [3:0] */ + +/* + * R45 (0x2D) - PLL Control 2 + */ +#define WM8955_K_17_9_MASK 0x01FF /* K(17:9) - [8:0] */ +#define WM8955_K_17_9_SHIFT 0 /* K(17:9) - [8:0] */ +#define WM8955_K_17_9_WIDTH 9 /* K(17:9) - [8:0] */ + +/* + * R46 (0x2E) - PLL Control 3 + */ +#define WM8955_K_8_0_MASK 0x01FF /* K(8:0) - [8:0] */ +#define WM8955_K_8_0_SHIFT 0 /* K(8:0) - [8:0] */ +#define WM8955_K_8_0_WIDTH 9 /* K(8:0) - [8:0] */ + +/* + * R59 (0x3B) - PLL Control 4 + */ +#define WM8955_KEN 0x0080 /* KEN */ +#define WM8955_KEN_MASK 0x0080 /* KEN */ +#define WM8955_KEN_SHIFT 7 /* KEN */ +#define WM8955_KEN_WIDTH 1 /* KEN */ + +#endif |
