summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/edac/i5100_edac.c112
1 files changed, 110 insertions, 2 deletions
diff --git a/drivers/edac/i5100_edac.c b/drivers/edac/i5100_edac.c
index b2fbb45..9a93318 100644
--- a/drivers/edac/i5100_edac.c
+++ b/drivers/edac/i5100_edac.c
@@ -25,6 +25,8 @@
/* device 16, func 1 */
#define I5100_MC 0x40 /* Memory Control Register */
+#define I5100_MC_SCRBEN_MASK (1 << 7)
+#define I5100_MC_SCRBDONE_MASK (1 << 4)
#define I5100_MS 0x44 /* Memory Status Register */
#define I5100_SPDDATA 0x48 /* Serial Presence Detect Status Reg */
#define I5100_SPDCMD 0x4c /* Serial Presence Detect Command Reg */
@@ -72,11 +74,21 @@
/* bit field accessors */
+static inline u32 i5100_mc_scrben(u32 mc)
+{
+ return mc >> 7 & 1;
+}
+
static inline u32 i5100_mc_errdeten(u32 mc)
{
return mc >> 5 & 1;
}
+static inline u32 i5100_mc_scrbdone(u32 mc)
+{
+ return mc >> 4 & 1;
+}
+
static inline u16 i5100_spddata_rdo(u16 a)
{
return a >> 15 & 1;
@@ -272,6 +284,7 @@ static inline u32 i5100_recmemb_ras(u32 a)
#define I5100_MAX_DIMM_SLOTS_PER_CHAN 4
#define I5100_MAX_RANK_INTERLEAVE 4
#define I5100_MAX_DMIRS 5
+#define I5100_SCRUB_REFRESH_RATE (5 * 60 * HZ)
struct i5100_priv {
/* ranks on each dimm -- 0 maps to not present -- obtained via SPD */
@@ -318,6 +331,9 @@ struct i5100_priv {
struct pci_dev *mc; /* device 16 func 1 */
struct pci_dev *ch0mm; /* device 21 func 0 */
struct pci_dev *ch1mm; /* device 22 func 0 */
+
+ struct delayed_work i5100_scrubbing;
+ int scrub_enable;
};
/* map a rank/chan to a slot number on the mainboard */
@@ -534,6 +550,80 @@ static void i5100_check_error(struct mem_ctl_info *mci)
}
}
+/* The i5100 chipset will scrub the entire memory once, then
+ * set a done bit. Continuous scrubbing is achieved by enqueing
+ * delayed work to a workqueue, checking every few minutes if
+ * the scrubbing has completed and if so reinitiating it.
+ */
+
+static void i5100_refresh_scrubbing(struct work_struct *work)
+{
+ struct delayed_work *i5100_scrubbing = container_of(work,
+ struct delayed_work,
+ work);
+ struct i5100_priv *priv = container_of(i5100_scrubbing,
+ struct i5100_priv,
+ i5100_scrubbing);
+ u32 dw;
+
+ pci_read_config_dword(priv->mc, I5100_MC, &dw);
+
+ if (priv->scrub_enable) {
+
+ pci_read_config_dword(priv->mc, I5100_MC, &dw);
+
+ if (i5100_mc_scrbdone(dw)) {
+ dw |= I5100_MC_SCRBEN_MASK;
+ pci_write_config_dword(priv->mc, I5100_MC, dw);
+ pci_read_config_dword(priv->mc, I5100_MC, &dw);
+ }
+
+ schedule_delayed_work(&(priv->i5100_scrubbing),
+ I5100_SCRUB_REFRESH_RATE);
+ }
+}
+/*
+ * The bandwidth is based on experimentation, feel free to refine it.
+ */
+static int i5100_set_scrub_rate(struct mem_ctl_info *mci,
+ u32 *bandwidth)
+{
+ struct i5100_priv *priv = mci->pvt_info;
+ u32 dw;
+
+ pci_read_config_dword(priv->mc, I5100_MC, &dw);
+ if (*bandwidth) {
+ priv->scrub_enable = 1;
+ dw |= I5100_MC_SCRBEN_MASK;
+ schedule_delayed_work(&(priv->i5100_scrubbing),
+ I5100_SCRUB_REFRESH_RATE);
+ } else {
+ priv->scrub_enable = 0;
+ dw &= ~I5100_MC_SCRBEN_MASK;
+ cancel_delayed_work(&(priv->i5100_scrubbing));
+ }
+ pci_write_config_dword(priv->mc, I5100_MC, dw);
+
+ pci_read_config_dword(priv->mc, I5100_MC, &dw);
+
+ *bandwidth = 5900000 * i5100_mc_scrben(dw);
+
+ return 0;
+}
+
+static int i5100_get_scrub_rate(struct mem_ctl_info *mci,
+ u32 *bandwidth)
+{
+ struct i5100_priv *priv = mci->pvt_info;
+ u32 dw;
+
+ pci_read_config_dword(priv->mc, I5100_MC, &dw);
+
+ *bandwidth = 5900000 * i5100_mc_scrben(dw);
+
+ return 0;
+}
+
static struct pci_dev *pci_get_device_func(unsigned vendor,
unsigned device,
unsigned func)
@@ -869,6 +959,16 @@ static int __devinit i5100_init_one(struct pci_dev *pdev,
priv->ch0mm = ch0mm;
priv->ch1mm = ch1mm;
+ INIT_DELAYED_WORK(&(priv->i5100_scrubbing), i5100_refresh_scrubbing);
+
+ /* If scrubbing was already enabled by the bios, start maintaining it */
+ pci_read_config_dword(pdev, I5100_MC, &dw);
+ if (i5100_mc_scrben(dw)) {
+ priv->scrub_enable = 1;
+ schedule_delayed_work(&(priv->i5100_scrubbing),
+ I5100_SCRUB_REFRESH_RATE);
+ }
+
i5100_init_dimm_layout(pdev, mci);
i5100_init_interleaving(pdev, mci);
@@ -882,6 +982,8 @@ static int __devinit i5100_init_one(struct pci_dev *pdev,
mci->ctl_page_to_phys = NULL;
mci->edac_check = i5100_check_error;
+ mci->set_sdram_scrub_rate = i5100_set_scrub_rate;
+ mci->get_sdram_scrub_rate = i5100_get_scrub_rate;
i5100_init_csrows(mci);
@@ -897,12 +999,14 @@ static int __devinit i5100_init_one(struct pci_dev *pdev,
if (edac_mc_add_mc(mci)) {
ret = -ENODEV;
- goto bail_mc;
+ goto bail_scrub;
}
return ret;
-bail_mc:
+bail_scrub:
+ priv->scrub_enable = 0;
+ cancel_delayed_work_sync(&(priv->i5100_scrubbing));
edac_mc_free(mci);
bail_disable_ch1:
@@ -935,6 +1039,10 @@ static void __devexit i5100_remove_one(struct pci_dev *pdev)
return;
priv = mci->pvt_info;
+
+ priv->scrub_enable = 0;
+ cancel_delayed_work_sync(&(priv->i5100_scrubbing));
+
pci_disable_device(pdev);
pci_disable_device(priv->ch0mm);
pci_disable_device(priv->ch1mm);
OpenPOWER on IntegriCloud