diff options
39 files changed, 71 insertions, 71 deletions
diff --git a/arch/cris/arch-v10/drivers/eeprom.c b/arch/cris/arch-v10/drivers/eeprom.c index 6e1f191..284ebfd 100644 --- a/arch/cris/arch-v10/drivers/eeprom.c +++ b/arch/cris/arch-v10/drivers/eeprom.c @@ -1,7 +1,7 @@ /*!***************************************************************************** *! -*! Implements an interface for i2c compatible eeproms to run under linux. -*! Supports 2k, 8k(?) and 16k. Uses adaptive timing adjustents by +*! Implements an interface for i2c compatible eeproms to run under Linux. +*! Supports 2k, 8k(?) and 16k. Uses adaptive timing adjustments by *! Johan.Adolfsson@axis.com *! *! Probing results: @@ -51,7 +51,7 @@ *! Revision 1.8 2001/06/15 13:24:29 jonashg *! * Added verification of pointers from userspace in read and write. *! * Made busy counter volatile. -*! * Added define for inital write delay. +*! * Added define for initial write delay. *! * Removed warnings by using loff_t instead of unsigned long. *! *! Revision 1.7 2001/06/14 15:26:54 jonashg diff --git a/arch/cris/arch-v10/drivers/i2c.c b/arch/cris/arch-v10/drivers/i2c.c index 6114596..092c724 100644 --- a/arch/cris/arch-v10/drivers/i2c.c +++ b/arch/cris/arch-v10/drivers/i2c.c @@ -47,7 +47,7 @@ *! Update Port B register and shadow even when running with hardware support *! to avoid glitches when reading bits *! Never set direction to out in i2c_inbyte -*! Removed incorrect clock togling at end of i2c_inbyte +*! Removed incorrect clock toggling at end of i2c_inbyte *! *! Revision 1.8 2002/08/13 06:31:53 starvik *! Made SDA and SCL line configurable diff --git a/arch/cris/arch-v10/kernel/kgdb.c b/arch/cris/arch-v10/kernel/kgdb.c index 34528da..07628a1 100644 --- a/arch/cris/arch-v10/kernel/kgdb.c +++ b/arch/cris/arch-v10/kernel/kgdb.c @@ -33,7 +33,7 @@ *! *! Revision 1.2 2002/11/19 14:35:24 starvik *! Changes from linux 2.4 -*! Changed struct initializer syntax to the currently prefered notation +*! Changed struct initializer syntax to the currently preferred notation *! *! Revision 1.1 2001/12/17 13:59:27 bjornw *! Initial revision diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c index db8e1fc..14691cd 100644 --- a/arch/ia64/hp/common/sba_iommu.c +++ b/arch/ia64/hp/common/sba_iommu.c @@ -75,7 +75,7 @@ ** If a device prefetches beyond the end of a valid pdir entry, it will cause ** a hard failure, ie. MCA. Version 3.0 and later of the zx1 LBA should ** disconnect on 4k boundaries and prevent such issues. If the device is -** particularly agressive, this option will keep the entire pdir valid such +** particularly aggressive, this option will keep the entire pdir valid such ** that prefetching will hit a valid address. This could severely impact ** error containment, and is therefore off by default. The page that is ** used for spill-over is poisoned, so that should help debugging somewhat. @@ -258,10 +258,10 @@ static u64 prefetch_spill_page; /* ** DMA_CHUNK_SIZE is used by the SCSI mid-layer to break up -** (or rather not merge) DMA's into managable chunks. +** (or rather not merge) DMAs into manageable chunks. ** On parisc, this is more of the software/tuning constraint -** rather than the HW. I/O MMU allocation alogorithms can be -** faster with smaller size is (to some degree). +** rather than the HW. I/O MMU allocation algorithms can be +** faster with smaller sizes (to some degree). */ #define DMA_CHUNK_SIZE (BITS_PER_LONG*iovp_size) diff --git a/arch/sh64/lib/dbg.c b/arch/sh64/lib/dbg.c index 1326f45..4310fc8 100644 --- a/arch/sh64/lib/dbg.c +++ b/arch/sh64/lib/dbg.c @@ -383,7 +383,7 @@ void show_excp_regs(char *from, int trapnr, int signr, struct pt_regs *regs) /* ======================================================================= */ /* -** Depending on <base> scan the MMU, Data or Instrction side +** Depending on <base> scan the MMU, Data or Instruction side ** looking for a valid mapping matching Eaddr & asid. ** Return -1 if not found or the TLB id entry otherwise. ** Note: it works only for 4k pages! diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c index 9ed1c60..bb7ef57 100644 --- a/drivers/atm/iphase.c +++ b/drivers/atm/iphase.c @@ -305,7 +305,7 @@ static void clear_lockup (struct atm_vcc *vcc, IADEV *dev) { ** | R | NZ | 5-bit exponent | 9-bit mantissa | ** +----+----+------------------+-------------------------------+ ** -** R = reserverd (written as 0) +** R = reserved (written as 0) ** NZ = 0 if 0 cells/sec; 1 otherwise ** ** if NZ = 1, rate = 1.mmmmmmmmm x 2^(eeeee) cells/sec diff --git a/drivers/char/rio/riocmd.c b/drivers/char/rio/riocmd.c index 4df6ab2..167ebc8 100644 --- a/drivers/char/rio/riocmd.c +++ b/drivers/char/rio/riocmd.c @@ -922,7 +922,7 @@ int RIOUnUse(unsigned long iPortP, struct CmdBlk *CmdBlkP) ** ** Packet is an actual packet structure to be filled in with the packet ** information associated with the command. You need to fill in everything, -** as the command processore doesn't process the command packet in any way. +** as the command processor doesn't process the command packet in any way. ** ** The PreFuncP is called before the packet is enqueued on the host rup. ** PreFuncP is called as (*PreFuncP)(PreArg, CmdBlkP);. PreFuncP must diff --git a/drivers/char/rio/rioinit.c b/drivers/char/rio/rioinit.c index 99f3df0..0794844 100644 --- a/drivers/char/rio/rioinit.c +++ b/drivers/char/rio/rioinit.c @@ -222,7 +222,7 @@ int RIOBoardTest(unsigned long paddr, void __iomem *caddr, unsigned char type, i ** which value will be written into memory. ** Call with op set to zero means that the RAM will not be read and checked ** before it is written. -** Call with op not zero, and the RAM will be read and compated with val[op-1] +** Call with op not zero and the RAM will be read and compared with val[op-1] ** to check that the data from the previous phase was retained. */ diff --git a/drivers/char/rio/rioparam.c b/drivers/char/rio/rioparam.c index 1066d97..bb498d2 100644 --- a/drivers/char/rio/rioparam.c +++ b/drivers/char/rio/rioparam.c @@ -87,8 +87,8 @@ static char *_rioparam_c_sccs_ = "@(#)rioparam.c 1.3"; ** command bit set onto the port. The command bit is in the len field, ** and gets ORed in with the actual byte count. ** -** When you send a packet with the command bit set, then the first -** data byte ( data[0] ) is interpretted as the command to execute. +** When you send a packet with the command bit set the first +** data byte (data[0]) is interpreted as the command to execute. ** It also governs what data structure overlay should accompany the packet. ** Commands are defined in cirrus/cirrus.h ** @@ -103,7 +103,7 @@ static char *_rioparam_c_sccs_ = "@(#)rioparam.c 1.3"; ** ** Most commands do not use the remaining bytes in the data array. The ** exceptions are OPEN MOPEN and CONFIG. (NB. As with the SI CONFIG and -** OPEN are currently analagous). With these three commands the following +** OPEN are currently analogous). With these three commands the following ** 11 data bytes are all used to pass config information such as baud rate etc. ** The fields are also defined in cirrus.h. Some contain straightforward ** information such as the transmit XON character. Two contain the transmit and diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 8ccee9c..e3a2676 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -1635,7 +1635,7 @@ static int idefloppy_begin_format(ide_drive_t *drive, int __user *arg) /* ** Get ATAPI_FORMAT_UNIT progress indication. ** -** Userland gives a pointer to an int. The int is set to a progresss +** Userland gives a pointer to an int. The int is set to a progress ** indicator 0-65536, with 65536=100%. ** ** If the drive does not support format progress indication, we just check diff --git a/drivers/isdn/hardware/eicon/os_4bri.c b/drivers/isdn/hardware/eicon/os_4bri.c index 11e6f93..7b4ec3f 100644 --- a/drivers/isdn/hardware/eicon/os_4bri.c +++ b/drivers/isdn/hardware/eicon/os_4bri.c @@ -464,7 +464,7 @@ int diva_4bri_init_card(diva_os_xdi_adapter_t * a) /* ** Cleanup function will be called for master adapter only -** this is garanteed by design: cleanup callback is set +** this is guaranteed by design: cleanup callback is set ** by master adapter only */ static int diva_4bri_cleanup_adapter(diva_os_xdi_adapter_t * a) diff --git a/drivers/isdn/hisax/hfc4s8s_l1.h b/drivers/isdn/hisax/hfc4s8s_l1.h index e8f9c07..9d5d2a5 100644 --- a/drivers/isdn/hisax/hfc4s8s_l1.h +++ b/drivers/isdn/hisax/hfc4s8s_l1.h @@ -16,7 +16,7 @@ /* * include Genero generated HFC-4S/8S header file hfc48scu.h -* for comlete register description. This will define _HFC48SCU_H_ +* for complete register description. This will define _HFC48SCU_H_ * to prevent redefinitions */ diff --git a/drivers/media/dvb/ttpci/budget-patch.c b/drivers/media/dvb/ttpci/budget-patch.c index fc1267b..9a15539 100644 --- a/drivers/media/dvb/ttpci/budget-patch.c +++ b/drivers/media/dvb/ttpci/budget-patch.c @@ -500,14 +500,14 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte /* New design (By Emard) ** this rps1 code will copy internal HS event to GPIO3 pin. -** GPIO3 is in budget-patch hardware connectd to port B VSYNC +** GPIO3 is in budget-patch hardware connected to port B VSYNC ** HS is an internal event of 7146, accessible with RPS ** and temporarily raised high every n lines ** (n in defined in the RPS_THRESH1 counter threshold) ** I think HS is raised high on the beginning of the n-th line ** and remains high until this n-th line that triggered -** it is completely received. When the receiption of n-th line +** it is completely received. When the reception of n-th line ** ends, HS is lowered. ** To transmit data over DMA, 7146 needs changing state at @@ -541,7 +541,7 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte ** hardware debug note: a working budget card (including budget patch) ** with vpeirq() interrupt setup in mode "0x90" (every 64K) will ** generate 3 interrupts per 25-Hz DMA frame of 2*188*512 bytes -** and that means 3*25=75 Hz of interrupt freqency, as seen by +** and that means 3*25=75 Hz of interrupt frequency, as seen by ** watch cat /proc/interrupts ** ** If this frequency is 3x lower (and data received in the DMA @@ -550,7 +550,7 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte ** this means VSYNC line is not connected in the hardware. ** (check soldering pcb and pins) ** The same behaviour of missing VSYNC can be duplicated on budget -** cards, by seting DD1_INIT trigger mode 7 in 3rd nibble. +** cards, by setting DD1_INIT trigger mode 7 in 3rd nibble. */ // Setup RPS1 "program" (p35) diff --git a/drivers/net/e100.c b/drivers/net/e100.c index 19ab344..3a8df47 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -1215,7 +1215,7 @@ static void e100_setup_ucode(struct nic *nic, struct cb *cb, struct sk_buff *skb * the literal in the instruction before the code is loaded, the * driver can change the algorithm. * -* INTDELAY - This loads the dead-man timer with its inital value. +* INTDELAY - This loads the dead-man timer with its initial value. * When this timer expires the interrupt is asserted, and the * timer is reset each time a new packet is received. (see * BUNDLEMAX below to set the limit on number of chained packets) diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c index 65077f3..796c4f7d 100644 --- a/drivers/net/e1000/e1000_hw.c +++ b/drivers/net/e1000/e1000_hw.c @@ -3868,7 +3868,7 @@ e1000_phy_hw_reset(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code * -* Sets bit 15 of the MII Control regiser +* Sets bit 15 of the MII Control register ******************************************************************************/ int32_t e1000_phy_reset(struct e1000_hw *hw) diff --git a/drivers/net/sk98lin/h/skdrv2nd.h b/drivers/net/sk98lin/h/skdrv2nd.h index 778d9e6..3fa6717 100644 --- a/drivers/net/sk98lin/h/skdrv2nd.h +++ b/drivers/net/sk98lin/h/skdrv2nd.h @@ -160,7 +160,7 @@ struct s_IOCTL { /* ** Interim definition of SK_DRV_TIMER placed in this file until -** common modules have boon finallized +** common modules have been finalized */ #define SK_DRV_TIMER 11 #define SK_DRV_MODERATION_TIMER 1 diff --git a/drivers/net/sk98lin/skdim.c b/drivers/net/sk98lin/skdim.c index 07c1b4c..37ce03f 100644 --- a/drivers/net/sk98lin/skdim.c +++ b/drivers/net/sk98lin/skdim.c @@ -252,7 +252,7 @@ SkDimEnableModerationIfNeeded(SK_AC *pAC) { /******************************************************************************* ** Function : SkDimDisplayModerationSettings -** Description : Displays the current settings regaring interrupt moderation +** Description : Displays the current settings regarding interrupt moderation ** Programmer : Ralph Roesler ** Last Modified: 22-mar-03 ** Returns : void (!) @@ -510,7 +510,7 @@ EnableIntMod(SK_AC *pAC) { /******************************************************************************* ** Function : DisableIntMod() -** Description : Disbles the interrupt moderation independent of what inter- +** Description : Disables the interrupt moderation independent of what inter- ** rupts are running or not ** Programmer : Ralph Roesler ** Last Modified: 23-mar-03 diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c index 1f74281..72120d5 100644 --- a/drivers/net/wireless/ipw2200.c +++ b/drivers/net/wireless/ipw2200.c @@ -6920,8 +6920,8 @@ static int ipw_qos_association(struct ipw_priv *priv, } /* -* handling the beaconing responces. if we get different QoS setting -* of the network from the the associated setting adjust the QoS +* handling the beaconing responses. if we get different QoS setting +* off the network from the associated setting, adjust the QoS * setting */ static int ipw_qos_association_resp(struct ipw_priv *priv, diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c index 68cb3a0..fe3f5f5 100644 --- a/drivers/parisc/ccio-dma.c +++ b/drivers/parisc/ccio-dma.c @@ -486,7 +486,7 @@ typedef unsigned long space_t; ** This bit tells U2 to do R/M/W for partial cachelines. "Streaming" ** data can avoid this if the mapping covers full cache lines. ** o STOP_MOST is needed for atomicity across cachelines. -** Apperently only "some EISA devices" need this. +** Apparently only "some EISA devices" need this. ** Using CONFIG_ISA is hack. Only the IOA with EISA under it needs ** to use this hint iff the EISA devices needs this feature. ** According to the U2 ERS, STOP_MOST enabled pages hurt performance. diff --git a/drivers/parisc/iosapic.c b/drivers/parisc/iosapic.c index c2949b4..12bab64 100644 --- a/drivers/parisc/iosapic.c +++ b/drivers/parisc/iosapic.c @@ -50,12 +50,12 @@ ** ** PA Firmware ** ----------- -** PA-RISC platforms have two fundementally different types of firmware. +** PA-RISC platforms have two fundamentally different types of firmware. ** For PCI devices, "Legacy" PDC initializes the "INTERRUPT_LINE" register ** and BARs similar to a traditional PC BIOS. ** The newer "PAT" firmware supports PDC calls which return tables. -** PAT firmware only initializes PCI Console and Boot interface. -** With these tables, the OS can progam all other PCI devices. +** PAT firmware only initializes the PCI Console and Boot interface. +** With these tables, the OS can program all other PCI devices. ** ** One such PAT PDC call returns the "Interrupt Routing Table" (IRT). ** The IRT maps each PCI slot's INTA-D "output" line to an I/O SAPIC diff --git a/drivers/pci/hotplug/ibmphp_hpc.c b/drivers/pci/hotplug/ibmphp_hpc.c index c3ac98a..f55ac38 100644 --- a/drivers/pci/hotplug/ibmphp_hpc.c +++ b/drivers/pci/hotplug/ibmphp_hpc.c @@ -531,7 +531,7 @@ static u8 hpc_readcmdtoindex (u8 cmd, u8 index) * * Action: issue a READ command to HPC * -* Input: pslot - can not be NULL for READ_ALLSTAT +* Input: pslot - cannot be NULL for READ_ALLSTAT * pstatus - can be NULL for READ_ALLSTAT * * Return 0 or error codes diff --git a/drivers/s390/net/claw.h b/drivers/s390/net/claw.h index 969be46..1ee9a6f 100644 --- a/drivers/s390/net/claw.h +++ b/drivers/s390/net/claw.h @@ -29,7 +29,7 @@ #define CLAW_COMPLETE 0xff /* flag to indicate i/o completed */ /*-----------------------------------------------------* -* CLAW control comand code * +* CLAW control command code * *------------------------------------------------------*/ #define SYSTEM_VALIDATE_REQUEST 0x01 /* System Validate request */ diff --git a/drivers/scsi/aic94xx/aic94xx_reg_def.h b/drivers/scsi/aic94xx/aic94xx_reg_def.h index b79f45f..a11f4e6 100644 --- a/drivers/scsi/aic94xx/aic94xx_reg_def.h +++ b/drivers/scsi/aic94xx/aic94xx_reg_def.h @@ -2000,7 +2000,7 @@ * The host accesses this scratch in a different manner from the * central sequencer. The sequencer has to use CSEQ registers CSCRPAGE * and CMnSCRPAGE to access the scratch memory. A flat mapping of the - * scratch memory is avaliable for software convenience and to prevent + * scratch memory is available for software convenience and to prevent * corruption while the sequencer is running. This memory is mapped * onto addresses 800h - BFFh, total of 400h bytes. * diff --git a/drivers/scsi/aic94xx/aic94xx_sds.c b/drivers/scsi/aic94xx/aic94xx_sds.c index de7c04d..e5a0ec3 100644 --- a/drivers/scsi/aic94xx/aic94xx_sds.c +++ b/drivers/scsi/aic94xx/aic94xx_sds.c @@ -64,7 +64,7 @@ struct asd_ocm_dir { #define OCM_INIT_DIR_ENTRIES 5 /*************************************************************************** -* OCM dircetory default +* OCM directory default ***************************************************************************/ static struct asd_ocm_dir OCMDirInit = { @@ -73,7 +73,7 @@ static struct asd_ocm_dir OCMDirInit = }; /*************************************************************************** -* OCM dircetory Entries default +* OCM directory Entries default ***************************************************************************/ static struct asd_ocm_dir_ent OCMDirEntriesInit[OCM_INIT_DIR_ENTRIES] = { diff --git a/drivers/scsi/ncr53c8xx.c b/drivers/scsi/ncr53c8xx.c index 6cc2bc2..adb8eb4 100644 --- a/drivers/scsi/ncr53c8xx.c +++ b/drivers/scsi/ncr53c8xx.c @@ -185,7 +185,7 @@ static inline struct list_head *ncr_list_pop(struct list_head *head) ** power of 2 cache line size. ** Enhanced in linux-2.3.44 to provide a memory pool ** per pcidev to support dynamic dma mapping. (I would -** have preferred a real bus astraction, btw). +** have preferred a real bus abstraction, btw). ** **========================================================== */ @@ -1438,7 +1438,7 @@ struct head { ** The first four bytes (scr_st[4]) are used inside the script by ** "COPY" commands. ** Because source and destination must have the same alignment -** in a DWORD, the fields HAVE to be at the choosen offsets. +** in a DWORD, the fields HAVE to be at the chosen offsets. ** xerr_st 0 (0x34) scratcha ** sync_st 1 (0x05) sxfer ** wide_st 3 (0x03) scntl3 @@ -1498,7 +1498,7 @@ struct head { ** the DSA (data structure address) register points ** to this substructure of the ccb. ** This substructure contains the header with -** the script-processor-changable data and +** the script-processor-changeable data and ** data blocks for the indirect move commands. ** **---------------------------------------------------------- @@ -5107,7 +5107,7 @@ void ncr_complete (struct ncb *np, struct ccb *cp) /* ** This CCB has been skipped by the NCR. -** Queue it in the correponding unit queue. +** Queue it in the corresponding unit queue. */ static void ncr_ccb_skipped(struct ncb *np, struct ccb *cp) { @@ -5896,8 +5896,8 @@ static void ncr_log_hard_error(struct ncb *np, u16 sist, u_char dstat) ** ** In normal cases, interrupt conditions occur one at a ** time. The ncr is able to stack in some extra registers -** other interrupts that will occurs after the first one. -** But severall interrupts may occur at the same time. +** other interrupts that will occur after the first one. +** But, several interrupts may occur at the same time. ** ** We probably should only try to deal with the normal ** case, but it seems that multiple interrupts occur in @@ -6796,7 +6796,7 @@ void ncr_int_sir (struct ncb *np) ** The host status field is set to HS_NEGOTIATE to mark this ** situation. ** -** If the target doesn't answer this message immidiately +** If the target doesn't answer this message immediately ** (as required by the standard), the SIR_NEGO_FAIL interrupt ** will be raised eventually. ** The handler removes the HS_NEGOTIATE status, and sets the diff --git a/drivers/scsi/ncr53c8xx.h b/drivers/scsi/ncr53c8xx.h index cb8b770..b39357d 100644 --- a/drivers/scsi/ncr53c8xx.h +++ b/drivers/scsi/ncr53c8xx.h @@ -218,7 +218,7 @@ ** Same as option 1, but also deal with ** misconfigured interrupts. ** -** - Edge triggerred instead of level sensitive. +** - Edge triggered instead of level sensitive. ** - No interrupt line connected. ** - IRQ number misconfigured. ** @@ -549,7 +549,7 @@ struct ncr_driver_setup { /* ** Initial setup. -** Can be overriden at startup by a command line. +** Can be overridden at startup by a command line. */ #define SCSI_NCR_DRIVER_SETUP \ { \ @@ -1093,7 +1093,7 @@ struct scr_tblsel { **----------------------------------------------------------- ** On 810A, 860, 825A, 875, 895 and 896 chips the content ** of SFBR register can be used as data (SCR_SFBR_DATA). -** The 896 has additionnal IO registers starting at +** The 896 has additional IO registers starting at ** offset 0x80. Bit 7 of register offset is stored in ** bit 7 of the SCRIPTS instruction first DWORD. **----------------------------------------------------------- diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c index 32c635e..a00d159 100644 --- a/drivers/usb/host/u132-hcd.c +++ b/drivers/usb/host/u132-hcd.c @@ -211,7 +211,7 @@ int usb_ftdi_elan_read_pcimem(struct platform_device *pdev, u8 addressofs, int usb_ftdi_elan_write_pcimem(struct platform_device *pdev, u8 addressofs, u8 width, u32 data); /* -* these can not be inlines because we need the structure offset!! +* these cannot be inlines because we need the structure offset!! * Does anyone have a better way????? */ #define u132_read_pcimem(u132, member, data) \ @@ -3045,7 +3045,7 @@ static struct hc_driver u132_hc_driver = { * This function may be called by the USB core whilst the "usb_all_devices_rwsem" * is held for writing, thus this module must not call usb_remove_hcd() * synchronously - but instead should immediately stop activity to the -* device and ansynchronously call usb_remove_hcd() +* device and asynchronously call usb_remove_hcd() */ static int __devexit u132_remove(struct platform_device *pdev) { @@ -3241,7 +3241,7 @@ static int u132_resume(struct platform_device *pdev) #define u132_resume NULL #endif /* -* this driver is loaded explicitely by ftdi_u132 +* this driver is loaded explicitly by ftdi_u132 * * the platform_driver struct is static because it is per type of module */ diff --git a/drivers/usb/misc/usb_u132.h b/drivers/usb/misc/usb_u132.h index 551ba89..5b5a3e6 100644 --- a/drivers/usb/misc/usb_u132.h +++ b/drivers/usb/misc/usb_u132.h @@ -52,7 +52,7 @@ * the kernel to load the "u132-hcd" module. * * The "ftdi-u132" module provides the interface to the inserted -* PC card and the "u132-hcd" module uses the API to send and recieve +* PC card and the "u132-hcd" module uses the API to send and receive * data. The API features call-backs, so that part of the "u132-hcd" * module code will run in the context of one of the kernel threads * of the "ftdi-u132" module. diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index bdb5810..5e3ac28 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -157,7 +157,7 @@ * to TASK_RUNNING will be lost and write_chan's subsequent call to * schedule() will never return (unless it catches a signal). * This race condition occurs because write_bulk_callback() (and thus -* the wakeup) are called asynchonously from an interrupt, rather than +* the wakeup) are called asynchronously from an interrupt, rather than * from the scheduler. We can avoid the race by calling the wakeup * from the scheduler queue and that's our fix: Now, at the end of * write_bulk_callback() we queue up a wakeup call on the scheduler diff --git a/fs/reiserfs/journal.c b/fs/reiserfs/journal.c index 85ce232..ac93174 100644 --- a/fs/reiserfs/journal.c +++ b/fs/reiserfs/journal.c @@ -1464,7 +1464,7 @@ static int flush_journal_list(struct super_block *s, } /* if someone has this block in a newer transaction, just make - ** sure they are commited, and don't try writing it to disk + ** sure they are committed, and don't try writing it to disk */ if (pjl) { if (atomic_read(&pjl->j_commit_left)) @@ -3384,7 +3384,7 @@ static int remove_from_transaction(struct super_block *p_s_sb, /* ** for any cnode in a journal list, it can only be dirtied of all the -** transactions that include it are commited to disk. +** transactions that include it are committed to disk. ** this checks through each transaction, and returns 1 if you are allowed to dirty, ** and 0 if you aren't ** @@ -3426,7 +3426,7 @@ static int can_dirty(struct reiserfs_journal_cnode *cn) } /* syncs the commit blocks, but does not force the real buffers to disk -** will wait until the current transaction is done/commited before returning +** will wait until the current transaction is done/committed before returning */ int journal_end_sync(struct reiserfs_transaction_handle *th, struct super_block *p_s_sb, unsigned long nblocks) diff --git a/include/asm-m68knommu/mcfmbus.h b/include/asm-m68knommu/mcfmbus.h index 13df9d4..319899c 100644 --- a/include/asm-m68knommu/mcfmbus.h +++ b/include/asm-m68knommu/mcfmbus.h @@ -37,7 +37,7 @@ #define MCFMBUS_MFDR_MBC(a) ((a)&0x3F) /*M-Bus Clock*/ /* -* Define bit flags in Controll Register +* Define bit flags in Control Register */ #define MCFMBUS_MBCR_MEN (0x80) /* M-Bus Enable */ diff --git a/include/asm-parisc/dma.h b/include/asm-parisc/dma.h index da2cf37..31ad0f0 100644 --- a/include/asm-parisc/dma.h +++ b/include/asm-parisc/dma.h @@ -17,10 +17,10 @@ /* ** DMA_CHUNK_SIZE is used by the SCSI mid-layer to break up -** (or rather not merge) DMA's into managable chunks. +** (or rather not merge) DMAs into manageable chunks. ** On parisc, this is more of the software/tuning constraint -** rather than the HW. I/O MMU allocation alogorithms can be -** faster with smaller size is (to some degree). +** rather than the HW. I/O MMU allocation algorithms can be +** faster with smaller sizes (to some degree). */ #define DMA_CHUNK_SIZE (BITS_PER_LONG*PAGE_SIZE) diff --git a/include/asm-parisc/pci.h b/include/asm-parisc/pci.h index 7b8ad11..7b3be9a 100644 --- a/include/asm-parisc/pci.h +++ b/include/asm-parisc/pci.h @@ -149,7 +149,7 @@ extern int parisc_bus_is_phys; /* in arch/parisc/kernel/setup.c */ /* ** Most PCI devices (eg Tulip, NCR720) also export the same registers ** to both MMIO and I/O port space. Due to poor performance of I/O Port -** access under HP PCI bus adapters, strongly reccomend use of MMIO +** access under HP PCI bus adapters, strongly recommend the use of MMIO ** address space. ** ** While I'm at it more PA programming notes: diff --git a/include/asm-parisc/ropes.h b/include/asm-parisc/ropes.h index 5542dd0..007a8806 100644 --- a/include/asm-parisc/ropes.h +++ b/include/asm-parisc/ropes.h @@ -14,7 +14,7 @@ #endif /* -** The number of pdir entries to "free" before issueing +** The number of pdir entries to "free" before issuing ** a read to PCOM register to flush out PCOM writes. ** Interacts with allocation granularity (ie 4 or 8 entries ** allocated and free'd/purged at a time might make this diff --git a/include/linux/ixjuser.h b/include/linux/ixjuser.h index fd1756d..88b4589 100644 --- a/include/linux/ixjuser.h +++ b/include/linux/ixjuser.h @@ -315,7 +315,7 @@ typedef struct { * structures. If the freq0 variable is non-zero, the tone table contents * for the tone_index are updated to the frequencies and gains defined. It * should be noted that DTMF tones cannot be reassigned, so if DTMF tone -* table indexs are used in a cadence the frequency and gain variables will +* table indexes are used in a cadence the frequency and gain variables will * be ignored. * * If the array elements contain frequency parameters the driver will diff --git a/include/linux/reiserfs_fs_sb.h b/include/linux/reiserfs_fs_sb.h index 73e0bec..62a7169 100644 --- a/include/linux/reiserfs_fs_sb.h +++ b/include/linux/reiserfs_fs_sb.h @@ -429,7 +429,7 @@ enum reiserfs_mount_options { /* -o hash={tea, rupasov, r5, detect} is meant for properly mounting ** reiserfs disks from 3.5.19 or earlier. 99% of the time, this option ** is not required. If the normal autodection code can't determine which -** hash to use (because both hases had the same value for a file) +** hash to use (because both hashes had the same value for a file) ** use this option to force a specific hash. It won't allow you to override ** the existing hash on the FS, so if you have a tea hash disk, and mount ** with -o hash=rupasov, the mount will fail. diff --git a/net/wanrouter/af_wanpipe.c b/net/wanrouter/af_wanpipe.c index 6f39faa..c205973 100644 --- a/net/wanrouter/af_wanpipe.c +++ b/net/wanrouter/af_wanpipe.c @@ -13,7 +13,7 @@ * Due Credit: * Wanpipe socket layer is based on Packet and * the X25 socket layers. The above sockets were -* used for the specific use of Sangoma Technoloiges +* used for the specific use of Sangoma Technologies * API programs. * Packet socket Authors: Ross Biro, Fred N. van Kempen and * Alan Cox. @@ -23,7 +23,7 @@ * Apr 25, 2000 Nenad Corbic o Added the ability to send zero length packets. * Mar 13, 2000 Nenad Corbic o Added a tx buffer check via ioctl call. * Mar 06, 2000 Nenad Corbic o Fixed the corrupt sock lcn problem. -* Server and client applicaton can run +* Server and client application can run * simultaneously without conflicts. * Feb 29, 2000 Nenad Corbic o Added support for PVC protocols, such as * CHDLC, Frame Relay and HDLC API. diff --git a/net/wanrouter/wanmain.c b/net/wanrouter/wanmain.c index 9479659..316211d 100644 --- a/net/wanrouter/wanmain.c +++ b/net/wanrouter/wanmain.c @@ -3,7 +3,7 @@ * * This module is completely hardware-independent and provides * the following common services for the WAN Link Drivers: -* o WAN device managenment (registering, unregistering) +* o WAN device management (registering, unregistering) * o Network interface management * o Physical connection management (dial-up, incoming calls) * o Logical connection management (switched virtual circuits) diff --git a/sound/oss/cs46xx.c b/sound/oss/cs46xx.c index 6e3c41f..b1c5d82 100644 --- a/sound/oss/cs46xx.c +++ b/sound/oss/cs46xx.c @@ -779,7 +779,7 @@ static unsigned int cs_set_adc_rate(struct cs_state *state, unsigned int rate) rate = 48000 / 9; /* - * We can not capture at at rate greater than the Input Rate (48000). + * We cannot capture at at rate greater than the Input Rate (48000). * Return an error if an attempt is made to stray outside that limit. */ if (rate > 48000) @@ -4754,8 +4754,8 @@ static int cs_hardware_init(struct cs_card *card) mdelay(5 * cs_laptop_wait); /* Shouldnt be needed ?? */ /* -* If we are resuming under 2.2.x then we can not schedule a timeout. -* so, just spin the CPU. +* If we are resuming under 2.2.x then we cannot schedule a timeout, +* so just spin the CPU. */ if (card->pm.flags & CS46XX_PM_IDLE) { /* |
