diff options
-rw-r--r-- | arch/arm/mach-spear3xx/include/mach/irqs.h | 101 | ||||
-rw-r--r-- | arch/arm/mach-spear3xx/include/mach/spear300.h | 16 | ||||
-rw-r--r-- | arch/arm/mach-spear3xx/include/mach/spear310.h | 24 | ||||
-rw-r--r-- | arch/arm/mach-spear3xx/include/mach/spear320.h | 26 | ||||
-rw-r--r-- | arch/arm/mach-spear3xx/spear300.c | 67 | ||||
-rw-r--r-- | arch/arm/mach-spear3xx/spear310.c | 148 | ||||
-rw-r--r-- | arch/arm/mach-spear3xx/spear320.c | 150 | ||||
-rw-r--r-- | arch/arm/mach-spear6xx/include/mach/irqs.h | 1 | ||||
-rw-r--r-- | arch/arm/plat-spear/Makefile | 2 | ||||
-rw-r--r-- | arch/arm/plat-spear/include/plat/shirq.h | 73 | ||||
-rw-r--r-- | arch/arm/plat-spear/shirq.c | 118 |
11 files changed, 718 insertions, 8 deletions
diff --git a/arch/arm/mach-spear3xx/include/mach/irqs.h b/arch/arm/mach-spear3xx/include/mach/irqs.h index fe980e0..7f940b8 100644 --- a/arch/arm/mach-spear3xx/include/mach/irqs.h +++ b/arch/arm/mach-spear3xx/include/mach/irqs.h @@ -14,7 +14,7 @@ #ifndef __MACH_IRQS_H #define __MACH_IRQS_H -/* IRQ definitions */ +/* SPEAr3xx IRQ definitions */ #define IRQ_HW_ACCEL_MOD_0 0 #define IRQ_INTRCOMM_RAS_ARM 1 #define IRQ_CPU_GPT1_1 2 @@ -50,16 +50,103 @@ #define IRQ_HW_ACCEL_MOD_1 31 #define IRQ_VIC_END 32 -#define SPEAR_GPIO_INT_BASE IRQ_VIC_END +#define VIRQ_START IRQ_VIC_END +/* SPEAr300 Virtual irq definitions */ #ifdef CONFIG_MACH_SPEAR300 -#define SPEAR_GPIO1_INT_BASE (SPEAR_GPIO_INT_BASE + 8) -#define SPEAR_GPIO_INT_END (SPEAR_GPIO1_INT_BASE + 8) +/* IRQs sharing IRQ_GEN_RAS_1 */ +#define VIRQ_IT_PERS_S (VIRQ_START + 0) +#define VIRQ_IT_CHANGE_S (VIRQ_START + 1) +#define VIRQ_I2S (VIRQ_START + 2) +#define VIRQ_TDM (VIRQ_START + 3) +#define VIRQ_CAMERA_L (VIRQ_START + 4) +#define VIRQ_CAMERA_F (VIRQ_START + 5) +#define VIRQ_CAMERA_V (VIRQ_START + 6) +#define VIRQ_KEYBOARD (VIRQ_START + 7) +#define VIRQ_GPIO1 (VIRQ_START + 8) + +/* IRQs sharing IRQ_GEN_RAS_3 */ +#define IRQ_CLCD IRQ_GEN_RAS_3 + +/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */ +#define IRQ_SDIO IRQ_INTRCOMM_RAS_ARM + +/* GPIO pins virtual irqs */ +#define SPEAR_GPIO_INT_BASE (VIRQ_START + 9) +#define SPEAR_GPIO1_INT_BASE (SPEAR_GPIO_INT_BASE + 8) +#define SPEAR_GPIO_INT_END (SPEAR_GPIO1_INT_BASE + 8) + +/* SPEAr310 Virtual irq definitions */ +#elif defined(CONFIG_MACH_SPEAR310) +/* IRQs sharing IRQ_GEN_RAS_1 */ +#define VIRQ_SMII0 (VIRQ_START + 0) +#define VIRQ_SMII1 (VIRQ_START + 1) +#define VIRQ_SMII2 (VIRQ_START + 2) +#define VIRQ_SMII3 (VIRQ_START + 3) +#define VIRQ_WAKEUP_SMII0 (VIRQ_START + 4) +#define VIRQ_WAKEUP_SMII1 (VIRQ_START + 5) +#define VIRQ_WAKEUP_SMII2 (VIRQ_START + 6) +#define VIRQ_WAKEUP_SMII3 (VIRQ_START + 7) + +/* IRQs sharing IRQ_GEN_RAS_2 */ +#define VIRQ_UART1 (VIRQ_START + 8) +#define VIRQ_UART2 (VIRQ_START + 9) +#define VIRQ_UART3 (VIRQ_START + 10) +#define VIRQ_UART4 (VIRQ_START + 11) +#define VIRQ_UART5 (VIRQ_START + 12) + +/* IRQs sharing IRQ_GEN_RAS_3 */ +#define VIRQ_EMI (VIRQ_START + 13) +#define VIRQ_PLGPIO (VIRQ_START + 14) + +/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */ +#define VIRQ_TDM_HDLC (VIRQ_START + 15) +#define VIRQ_RS485_0 (VIRQ_START + 16) +#define VIRQ_RS485_1 (VIRQ_START + 17) + +/* GPIO pins virtual irqs */ +#define SPEAR_GPIO_INT_BASE (VIRQ_START + 18) + +/* SPEAr320 Virtual irq definitions */ #else -#define SPEAR_GPIO_INT_END (SPEAR_GPIO_INT_BASE + 8) +/* IRQs sharing IRQ_GEN_RAS_1 */ +#define VIRQ_EMI (VIRQ_START + 0) +#define VIRQ_CLCD (VIRQ_START + 1) +#define VIRQ_SPP (VIRQ_START + 2) + +/* IRQs sharing IRQ_GEN_RAS_2 */ +#define IRQ_SDIO IRQ_GEN_RAS_2 + +/* IRQs sharing IRQ_GEN_RAS_3 */ +#define VIRQ_PLGPIO (VIRQ_START + 3) +#define VIRQ_I2S_PLAY (VIRQ_START + 4) +#define VIRQ_I2S_REC (VIRQ_START + 5) + +/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */ +#define VIRQ_CANU (VIRQ_START + 6) +#define VIRQ_CANL (VIRQ_START + 7) +#define VIRQ_UART1 (VIRQ_START + 8) +#define VIRQ_UART2 (VIRQ_START + 9) +#define VIRQ_SSP1 (VIRQ_START + 10) +#define VIRQ_SSP2 (VIRQ_START + 11) +#define VIRQ_SMII0 (VIRQ_START + 12) +#define VIRQ_MII1_SMII1 (VIRQ_START + 13) +#define VIRQ_WAKEUP_SMII0 (VIRQ_START + 14) +#define VIRQ_WAKEUP_MII1_SMII1 (VIRQ_START + 15) +#define VIRQ_I2C (VIRQ_START + 16) + +/* GPIO pins virtual irqs */ +#define SPEAR_GPIO_INT_BASE (VIRQ_START + 17) + +#endif + +/* PLGPIO Virtual IRQs */ +#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320) +#define SPEAR_PLGPIO_INT_BASE (SPEAR_GPIO_INT_BASE + 8) +#define SPEAR_GPIO_INT_END (SPEAR_PLGPIO_INT_BASE + 102) #endif -#define VIRTUAL_IRQS (SPEAR_GPIO_INT_END - IRQ_VIC_END) -#define NR_IRQS (IRQ_VIC_END + VIRTUAL_IRQS) +#define VIRQ_END SPEAR_GPIO_INT_END +#define NR_IRQS VIRQ_END #endif /* __MACH_IRQS_H */ diff --git a/arch/arm/mach-spear3xx/include/mach/spear300.h b/arch/arm/mach-spear3xx/include/mach/spear300.h index 40c16f3..ccaa765 100644 --- a/arch/arm/mach-spear3xx/include/mach/spear300.h +++ b/arch/arm/mach-spear3xx/include/mach/spear300.h @@ -20,6 +20,22 @@ #define SPEAR300_TELECOM_BASE 0x50000000 #define SPEAR300_TELECOM_SIZE 0x10000000 +/* Interrupt registers offsets and masks */ +#define SPEAR300_TELECOM_REG_SIZE 0x00010000 +#define INT_ENB_MASK_REG 0x54 +#define INT_STS_MASK_REG 0x58 +#define IT_PERS_S_IRQ_MASK (1 << 0) +#define IT_CHANGE_S_IRQ_MASK (1 << 1) +#define I2S_IRQ_MASK (1 << 2) +#define TDM_IRQ_MASK (1 << 3) +#define CAMERA_L_IRQ_MASK (1 << 4) +#define CAMERA_F_IRQ_MASK (1 << 5) +#define CAMERA_V_IRQ_MASK (1 << 6) +#define KEYBOARD_IRQ_MASK (1 << 7) +#define GPIO1_IRQ_MASK (1 << 8) + +#define SHIRQ_RAS1_MASK 0x1FF + #define SPEAR300_CLCD_BASE 0x60000000 #define SPEAR300_CLCD_SIZE 0x10000000 diff --git a/arch/arm/mach-spear3xx/include/mach/spear310.h b/arch/arm/mach-spear3xx/include/mach/spear310.h index d4f58d6..b27bb8a 100644 --- a/arch/arm/mach-spear3xx/include/mach/spear310.h +++ b/arch/arm/mach-spear3xx/include/mach/spear310.h @@ -40,6 +40,30 @@ #define SPEAR310_SOC_CONFIG_BASE 0xB4000000 #define SPEAR310_SOC_CONFIG_SIZE 0x00000070 +/* Interrupt registers offsets and masks */ +#define INT_STS_MASK_REG 0x04 +#define SMII0_IRQ_MASK (1 << 0) +#define SMII1_IRQ_MASK (1 << 1) +#define SMII2_IRQ_MASK (1 << 2) +#define SMII3_IRQ_MASK (1 << 3) +#define WAKEUP_SMII0_IRQ_MASK (1 << 4) +#define WAKEUP_SMII1_IRQ_MASK (1 << 5) +#define WAKEUP_SMII2_IRQ_MASK (1 << 6) +#define WAKEUP_SMII3_IRQ_MASK (1 << 7) +#define UART1_IRQ_MASK (1 << 8) +#define UART2_IRQ_MASK (1 << 9) +#define UART3_IRQ_MASK (1 << 10) +#define UART4_IRQ_MASK (1 << 11) +#define UART5_IRQ_MASK (1 << 12) +#define EMI_IRQ_MASK (1 << 13) +#define TDM_HDLC_IRQ_MASK (1 << 14) +#define RS485_0_IRQ_MASK (1 << 15) +#define RS485_1_IRQ_MASK (1 << 16) + +#define SHIRQ_RAS1_MASK 0x000FF +#define SHIRQ_RAS2_MASK 0x01F00 +#define SHIRQ_RAS3_MASK 0x02000 +#define SHIRQ_INTRCOMM_RAS_MASK 0x1C000 #endif /* __MACH_SPEAR310_H */ diff --git a/arch/arm/mach-spear3xx/include/mach/spear320.h b/arch/arm/mach-spear3xx/include/mach/spear320.h index e8ad2ed..cacf17a 100644 --- a/arch/arm/mach-spear3xx/include/mach/spear320.h +++ b/arch/arm/mach-spear3xx/include/mach/spear320.h @@ -64,6 +64,32 @@ #define SPEAR320_SOC_CONFIG_BASE 0xB4000000 #define SPEAR320_SOC_CONFIG_SIZE 0x00000070 +/* Interrupt registers offsets and masks */ +#define INT_STS_MASK_REG 0x04 +#define INT_CLR_MASK_REG 0x04 +#define INT_ENB_MASK_REG 0x08 +#define GPIO_IRQ_MASK (1 << 0) +#define I2S_PLAY_IRQ_MASK (1 << 1) +#define I2S_REC_IRQ_MASK (1 << 2) +#define EMI_IRQ_MASK (1 << 7) +#define CLCD_IRQ_MASK (1 << 8) +#define SPP_IRQ_MASK (1 << 9) +#define SDIO_IRQ_MASK (1 << 10) +#define CAN_U_IRQ_MASK (1 << 11) +#define CAN_L_IRQ_MASK (1 << 12) +#define UART1_IRQ_MASK (1 << 13) +#define UART2_IRQ_MASK (1 << 14) +#define SSP1_IRQ_MASK (1 << 15) +#define SSP2_IRQ_MASK (1 << 16) +#define SMII0_IRQ_MASK (1 << 17) +#define MII1_SMII1_IRQ_MASK (1 << 18) +#define WAKEUP_SMII0_IRQ_MASK (1 << 19) +#define WAKEUP_MII1_SMII1_IRQ_MASK (1 << 20) +#define I2C1_IRQ_MASK (1 << 21) + +#define SHIRQ_RAS1_MASK 0x000380 +#define SHIRQ_RAS3_MASK 0x000007 +#define SHIRQ_INTRCOMM_RAS_MASK 0x3FF800 #endif /* __MACH_SPEAR320_H */ diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c index 66e7fcd..3560f8c 100644 --- a/arch/arm/mach-spear3xx/spear300.c +++ b/arch/arm/mach-spear3xx/spear300.c @@ -17,6 +17,7 @@ #include <asm/irq.h> #include <mach/generic.h> #include <mach/spear.h> +#include <plat/shirq.h> /* pad multiplexing support */ /* muxing registers */ @@ -386,14 +387,78 @@ struct amba_device gpio1_device = { .end = SPEAR300_GPIO_BASE + SPEAR300_GPIO_SIZE - 1, .flags = IORESOURCE_MEM, }, - .irq = {IRQ_GEN_RAS_1, NO_IRQ}, + .irq = {VIRQ_GPIO1, NO_IRQ}, +}; + +/* spear3xx shared irq */ +struct shirq_dev_config shirq_ras1_config[] = { + { + .virq = VIRQ_IT_PERS_S, + .enb_mask = IT_PERS_S_IRQ_MASK, + .status_mask = IT_PERS_S_IRQ_MASK, + }, { + .virq = VIRQ_IT_CHANGE_S, + .enb_mask = IT_CHANGE_S_IRQ_MASK, + .status_mask = IT_CHANGE_S_IRQ_MASK, + }, { + .virq = VIRQ_I2S, + .enb_mask = I2S_IRQ_MASK, + .status_mask = I2S_IRQ_MASK, + }, { + .virq = VIRQ_TDM, + .enb_mask = TDM_IRQ_MASK, + .status_mask = TDM_IRQ_MASK, + }, { + .virq = VIRQ_CAMERA_L, + .enb_mask = CAMERA_L_IRQ_MASK, + .status_mask = CAMERA_L_IRQ_MASK, + }, { + .virq = VIRQ_CAMERA_F, + .enb_mask = CAMERA_F_IRQ_MASK, + .status_mask = CAMERA_F_IRQ_MASK, + }, { + .virq = VIRQ_CAMERA_V, + .enb_mask = CAMERA_V_IRQ_MASK, + .status_mask = CAMERA_V_IRQ_MASK, + }, { + .virq = VIRQ_KEYBOARD, + .enb_mask = KEYBOARD_IRQ_MASK, + .status_mask = KEYBOARD_IRQ_MASK, + }, { + .virq = VIRQ_GPIO1, + .enb_mask = GPIO1_IRQ_MASK, + .status_mask = GPIO1_IRQ_MASK, + }, +}; + +struct spear_shirq shirq_ras1 = { + .irq = IRQ_GEN_RAS_1, + .dev_config = shirq_ras1_config, + .dev_count = ARRAY_SIZE(shirq_ras1_config), + .regs = { + .enb_reg = INT_ENB_MASK_REG, + .status_reg = INT_STS_MASK_REG, + .status_reg_mask = SHIRQ_RAS1_MASK, + .clear_reg = -1, + }, }; /* spear300 routines */ void __init spear300_init(void) { + int ret = 0; + /* call spear3xx family common init function */ spear3xx_init(); + + /* shared irq registeration */ + shirq_ras1.regs.base = + ioremap(SPEAR300_TELECOM_BASE, SPEAR300_TELECOM_REG_SIZE); + if (shirq_ras1.regs.base) { + ret = spear_shirq_register(&shirq_ras1); + if (ret) + printk(KERN_ERR "Error registering Shared IRQ\n"); + } } void spear300_pmx_init(void) diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c index dd5a572..96a1ab8 100644 --- a/arch/arm/mach-spear3xx/spear310.c +++ b/arch/arm/mach-spear3xx/spear310.c @@ -15,6 +15,7 @@ #include <asm/irq.h> #include <mach/generic.h> #include <mach/spear.h> +#include <plat/shirq.h> /* pad multiplexing support */ /* muxing registers */ @@ -140,11 +141,158 @@ struct pmx_driver pmx_driver = { /* Add spear310 specific devices here */ +/* spear3xx shared irq */ +struct shirq_dev_config shirq_ras1_config[] = { + { + .virq = VIRQ_SMII0, + .status_mask = SMII0_IRQ_MASK, + }, { + .virq = VIRQ_SMII1, + .status_mask = SMII1_IRQ_MASK, + }, { + .virq = VIRQ_SMII2, + .status_mask = SMII2_IRQ_MASK, + }, { + .virq = VIRQ_SMII3, + .status_mask = SMII3_IRQ_MASK, + }, { + .virq = VIRQ_WAKEUP_SMII0, + .status_mask = WAKEUP_SMII0_IRQ_MASK, + }, { + .virq = VIRQ_WAKEUP_SMII1, + .status_mask = WAKEUP_SMII1_IRQ_MASK, + }, { + .virq = VIRQ_WAKEUP_SMII2, + .status_mask = WAKEUP_SMII2_IRQ_MASK, + }, { + .virq = VIRQ_WAKEUP_SMII3, + .status_mask = WAKEUP_SMII3_IRQ_MASK, + }, +}; + +struct spear_shirq shirq_ras1 = { + .irq = IRQ_GEN_RAS_1, + .dev_config = shirq_ras1_config, + .dev_count = ARRAY_SIZE(shirq_ras1_config), + .regs = { + .enb_reg = -1, + .status_reg = INT_STS_MASK_REG, + .status_reg_mask = SHIRQ_RAS1_MASK, + .clear_reg = -1, + }, +}; + +struct shirq_dev_config shirq_ras2_config[] = { + { + .virq = VIRQ_UART1, + .status_mask = UART1_IRQ_MASK, + }, { + .virq = VIRQ_UART2, + .status_mask = UART2_IRQ_MASK, + }, { + .virq = VIRQ_UART3, + .status_mask = UART3_IRQ_MASK, + }, { + .virq = VIRQ_UART4, + .status_mask = UART4_IRQ_MASK, + }, { + .virq = VIRQ_UART5, + .status_mask = UART5_IRQ_MASK, + }, +}; + +struct spear_shirq shirq_ras2 = { + .irq = IRQ_GEN_RAS_2, + .dev_config = shirq_ras2_config, + .dev_count = ARRAY_SIZE(shirq_ras2_config), + .regs = { + .enb_reg = -1, + .status_reg = INT_STS_MASK_REG, + .status_reg_mask = SHIRQ_RAS2_MASK, + .clear_reg = -1, + }, +}; + +struct shirq_dev_config shirq_ras3_config[] = { + { + .virq = VIRQ_EMI, + .status_mask = EMI_IRQ_MASK, + }, +}; + +struct spear_shirq shirq_ras3 = { + .irq = IRQ_GEN_RAS_3, + .dev_config = shirq_ras3_config, + .dev_count = ARRAY_SIZE(shirq_ras3_config), + .regs = { + .enb_reg = -1, + .status_reg = INT_STS_MASK_REG, + .status_reg_mask = SHIRQ_RAS3_MASK, + .clear_reg = -1, + }, +}; + +struct shirq_dev_config shirq_intrcomm_ras_config[] = { + { + .virq = VIRQ_TDM_HDLC, + .status_mask = TDM_HDLC_IRQ_MASK, + }, { + .virq = VIRQ_RS485_0, + .status_mask = RS485_0_IRQ_MASK, + }, { + .virq = VIRQ_RS485_1, + .status_mask = RS485_1_IRQ_MASK, + }, +}; + +struct spear_shirq shirq_intrcomm_ras = { + .irq = IRQ_INTRCOMM_RAS_ARM, + .dev_config = shirq_intrcomm_ras_config, + .dev_count = ARRAY_SIZE(shirq_intrcomm_ras_config), + .regs = { + .enb_reg = -1, + .status_reg = INT_STS_MASK_REG, + .status_reg_mask = SHIRQ_INTRCOMM_RAS_MASK, + .clear_reg = -1, + }, +}; + /* spear310 routines */ void __init spear310_init(void) { + void __iomem *base; + int ret = 0; + /* call spear3xx family common init function */ spear3xx_init(); + + /* shared irq registeration */ + base = ioremap(SPEAR310_SOC_CONFIG_BASE, SPEAR310_SOC_CONFIG_SIZE); + if (base) { + /* shirq 1 */ + shirq_ras1.regs.base = base; + ret = spear_shirq_register(&shirq_ras1); + if (ret) + printk(KERN_ERR "Error registering Shared IRQ 1\n"); + + /* shirq 2 */ + shirq_ras2.regs.base = base; + ret = spear_shirq_register(&shirq_ras2); + if (ret) + printk(KERN_ERR "Error registering Shared IRQ 2\n"); + + /* shirq 3 */ + shirq_ras3.regs.base = base; + ret = spear_shirq_register(&shirq_ras3); + if (ret) + printk(KERN_ERR "Error registering Shared IRQ 3\n"); + + /* shirq 4 */ + shirq_intrcomm_ras.regs.base = base; + ret = spear_shirq_register(&shirq_intrcomm_ras); + if (ret) + printk(KERN_ERR "Error registering Shared IRQ 4\n"); + } } void spear310_pmx_init(void) diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c index 2cedf5e..6a121954 100644 --- a/arch/arm/mach-spear3xx/spear320.c +++ b/arch/arm/mach-spear3xx/spear320.c @@ -15,6 +15,7 @@ #include <asm/irq.h> #include <mach/generic.h> #include <mach/spear.h> +#include <plat/shirq.h> /* pad multiplexing support */ /* muxing registers */ @@ -385,11 +386,160 @@ struct pmx_driver pmx_driver = { /* Add spear320 specific devices here */ +/* spear3xx shared irq */ +struct shirq_dev_config shirq_ras1_config[] = { + { + .virq = VIRQ_EMI, + .status_mask = EMI_IRQ_MASK, + .clear_mask = EMI_IRQ_MASK, + }, { + .virq = VIRQ_CLCD, + .status_mask = CLCD_IRQ_MASK, + .clear_mask = CLCD_IRQ_MASK, + }, { + .virq = VIRQ_SPP, + .status_mask = SPP_IRQ_MASK, + .clear_mask = SPP_IRQ_MASK, + }, +}; + +struct spear_shirq shirq_ras1 = { + .irq = IRQ_GEN_RAS_1, + .dev_config = shirq_ras1_config, + .dev_count = ARRAY_SIZE(shirq_ras1_config), + .regs = { + .enb_reg = -1, + .status_reg = INT_STS_MASK_REG, + .status_reg_mask = SHIRQ_RAS1_MASK, + .clear_reg = INT_CLR_MASK_REG, + .reset_to_clear = 1, + }, +}; + +struct shirq_dev_config shirq_ras3_config[] = { + { + .virq = VIRQ_PLGPIO, + .enb_mask = GPIO_IRQ_MASK, + .status_mask = GPIO_IRQ_MASK, + .clear_mask = GPIO_IRQ_MASK, + }, { + .virq = VIRQ_I2S_PLAY, + .enb_mask = I2S_PLAY_IRQ_MASK, + .status_mask = I2S_PLAY_IRQ_MASK, + .clear_mask = I2S_PLAY_IRQ_MASK, + }, { + .virq = VIRQ_I2S_REC, + .enb_mask = I2S_REC_IRQ_MASK, + .status_mask = I2S_REC_IRQ_MASK, + .clear_mask = I2S_REC_IRQ_MASK, + }, +}; + +struct spear_shirq shirq_ras3 = { + .irq = IRQ_GEN_RAS_3, + .dev_config = shirq_ras3_config, + .dev_count = ARRAY_SIZE(shirq_ras3_config), + .regs = { + .enb_reg = INT_ENB_MASK_REG, + .reset_to_enb = 1, + .status_reg = INT_STS_MASK_REG, + .status_reg_mask = SHIRQ_RAS3_MASK, + .clear_reg = INT_CLR_MASK_REG, + .reset_to_clear = 1, + }, +}; + +struct shirq_dev_config shirq_intrcomm_ras_config[] = { + { + .virq = VIRQ_CANU, + .status_mask = CAN_U_IRQ_MASK, + .clear_mask = CAN_U_IRQ_MASK, + }, { + .virq = VIRQ_CANL, + .status_mask = CAN_L_IRQ_MASK, + .clear_mask = CAN_L_IRQ_MASK, + }, { + .virq = VIRQ_UART1, + .status_mask = UART1_IRQ_MASK, + .clear_mask = UART1_IRQ_MASK, + }, { + .virq = VIRQ_UART2, + .status_mask = UART2_IRQ_MASK, + .clear_mask = UART2_IRQ_MASK, + }, { + .virq = VIRQ_SSP1, + .status_mask = SSP1_IRQ_MASK, + .clear_mask = SSP1_IRQ_MASK, + }, { + .virq = VIRQ_SSP2, + .status_mask = SSP2_IRQ_MASK, + .clear_mask = SSP2_IRQ_MASK, + }, { + .virq = VIRQ_SMII0, + .status_mask = SMII0_IRQ_MASK, + .clear_mask = SMII0_IRQ_MASK, + }, { + .virq = VIRQ_MII1_SMII1, + .status_mask = MII1_SMII1_IRQ_MASK, + .clear_mask = MII1_SMII1_IRQ_MASK, + }, { + .virq = VIRQ_WAKEUP_SMII0, + .status_mask = WAKEUP_SMII0_IRQ_MASK, + .clear_mask = WAKEUP_SMII0_IRQ_MASK, + }, { + .virq = VIRQ_WAKEUP_MII1_SMII1, + .status_mask = WAKEUP_MII1_SMII1_IRQ_MASK, + .clear_mask = WAKEUP_MII1_SMII1_IRQ_MASK, + }, { + .virq = VIRQ_I2C, + .status_mask = I2C1_IRQ_MASK, + .clear_mask = I2C1_IRQ_MASK, + }, +}; + +struct spear_shirq shirq_intrcomm_ras = { + .irq = IRQ_INTRCOMM_RAS_ARM, + .dev_config = shirq_intrcomm_ras_config, + .dev_count = ARRAY_SIZE(shirq_intrcomm_ras_config), + .regs = { + .enb_reg = -1, + .status_reg = INT_STS_MASK_REG, + .status_reg_mask = SHIRQ_INTRCOMM_RAS_MASK, + .clear_reg = INT_CLR_MASK_REG, + .reset_to_clear = 1, + }, +}; + /* spear320 routines */ void __init spear320_init(void) { + void __iomem *base; + int ret = 0; + /* call spear3xx family common init function */ spear3xx_init(); + + /* shared irq registeration */ + base = ioremap(SPEAR320_SOC_CONFIG_BASE, SPEAR320_SOC_CONFIG_SIZE); + if (base) { + /* shirq 1 */ + shirq_ras1.regs.base = base; + ret = spear_shirq_register(&shirq_ras1); + if (ret) + printk(KERN_ERR "Error registering Shared IRQ 1\n"); + + /* shirq 3 */ + shirq_ras3.regs.base = base; + ret = spear_shirq_register(&shirq_ras3); + if (ret) + printk(KERN_ERR "Error registering Shared IRQ 3\n"); + + /* shirq 4 */ + shirq_intrcomm_ras.regs.base = base; + ret = spear_shirq_register(&shirq_intrcomm_ras); + if (ret) + printk(KERN_ERR "Error registering Shared IRQ 4\n"); + } } void spear320_pmx_init(void) diff --git a/arch/arm/mach-spear6xx/include/mach/irqs.h b/arch/arm/mach-spear6xx/include/mach/irqs.h index 08a3abc..8f214b0 100644 --- a/arch/arm/mach-spear6xx/include/mach/irqs.h +++ b/arch/arm/mach-spear6xx/include/mach/irqs.h @@ -85,6 +85,7 @@ #define IRQ_VIC_END 64 +/* GPIO pins virtual irqs */ #define SPEAR_GPIO_INT_BASE IRQ_VIC_END #define SPEAR_GPIO0_INT_BASE SPEAR_GPIO_INT_BASE #define SPEAR_GPIO1_INT_BASE (SPEAR_GPIO0_INT_BASE + 8) diff --git a/arch/arm/plat-spear/Makefile b/arch/arm/plat-spear/Makefile index 6f4ad5e..eb89540 100644 --- a/arch/arm/plat-spear/Makefile +++ b/arch/arm/plat-spear/Makefile @@ -4,3 +4,5 @@ # Common support obj-y := clock.o padmux.o time.o + +obj-$(CONFIG_ARCH_SPEAR3XX) += shirq.o diff --git a/arch/arm/plat-spear/include/plat/shirq.h b/arch/arm/plat-spear/include/plat/shirq.h new file mode 100644 index 0000000..03ed8b5 --- /dev/null +++ b/arch/arm/plat-spear/include/plat/shirq.h @@ -0,0 +1,73 @@ +/* + * arch/arm/plat-spear/include/plat/shirq.h + * + * SPEAr platform shared irq layer header file + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __PLAT_SHIRQ_H +#define __PLAT_SHIRQ_H + +#include <linux/irq.h> +#include <linux/types.h> + +/* + * struct shirq_dev_config: shared irq device configuration + * + * virq: virtual irq number of device + * enb_mask: enable mask of device + * status_mask: status mask of device + * clear_mask: clear mask of device + */ +struct shirq_dev_config { + u32 virq; + u32 enb_mask; + u32 status_mask; + u32 clear_mask; +}; + +/* + * struct shirq_regs: shared irq register configuration + * + * base: base address of shared irq register + * enb_reg: enable register offset + * reset_to_enb: val 1 indicates, we need to clear bit for enabling interrupt + * status_reg: status register offset + * status_reg_mask: status register valid mask + * clear_reg: clear register offset + * reset_to_clear: val 1 indicates, we need to clear bit for clearing interrupt + */ +struct shirq_regs { + void __iomem *base; + u32 enb_reg; + u32 reset_to_enb; + u32 status_reg; + u32 status_reg_mask; + u32 clear_reg; + u32 reset_to_clear; +}; + +/* + * struct spear_shirq: shared irq structure + * + * irq: hardware irq number + * dev_config: array of device config structures which are using "irq" line + * dev_count: size of dev_config array + * regs: register configuration for shared irq block + */ +struct spear_shirq { + u32 irq; + struct shirq_dev_config *dev_config; + u32 dev_count; + struct shirq_regs regs; +}; + +int spear_shirq_register(struct spear_shirq *shirq); + +#endif /* __PLAT_SHIRQ_H */ diff --git a/arch/arm/plat-spear/shirq.c b/arch/arm/plat-spear/shirq.c new file mode 100644 index 0000000..2172d69 --- /dev/null +++ b/arch/arm/plat-spear/shirq.c @@ -0,0 +1,118 @@ +/* + * arch/arm/plat-spear/shirq.c + * + * SPEAr platform shared irq layer source file + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/err.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/spinlock.h> +#include <plat/shirq.h> + +struct spear_shirq *shirq; +static DEFINE_SPINLOCK(lock); + +static void shirq_irq_mask(unsigned irq) +{ + struct spear_shirq *shirq = get_irq_chip_data(irq); + u32 val, id = irq - shirq->dev_config[0].virq; + unsigned long flags; + + if ((shirq->regs.enb_reg == -1) || shirq->dev_config[id].enb_mask == -1) + return; + + spin_lock_irqsave(&lock, flags); + val = readl(shirq->regs.base + shirq->regs.enb_reg); + if (shirq->regs.reset_to_enb) + val |= shirq->dev_config[id].enb_mask; + else + val &= ~(shirq->dev_config[id].enb_mask); + writel(val, shirq->regs.base + shirq->regs.enb_reg); + spin_unlock_irqrestore(&lock, flags); +} + +static void shirq_irq_unmask(unsigned irq) +{ + struct spear_shirq *shirq = get_irq_chip_data(irq); + u32 val, id = irq - shirq->dev_config[0].virq; + unsigned long flags; + + if ((shirq->regs.enb_reg == -1) || shirq->dev_config[id].enb_mask == -1) + return; + + spin_lock_irqsave(&lock, flags); + val = readl(shirq->regs.base + shirq->regs.enb_reg); + if (shirq->regs.reset_to_enb) + val &= ~(shirq->dev_config[id].enb_mask); + else + val |= shirq->dev_config[id].enb_mask; + writel(val, shirq->regs.base + shirq->regs.enb_reg); + spin_unlock_irqrestore(&lock, flags); +} + +static struct irq_chip shirq_chip = { + .name = "spear_shirq", + .ack = shirq_irq_mask, + .mask = shirq_irq_mask, + .unmask = shirq_irq_unmask, +}; + +static void shirq_handler(unsigned irq, struct irq_desc *desc) +{ + u32 i, val, mask; + struct spear_shirq *shirq = get_irq_data(irq); + + desc->chip->ack(irq); + while ((val = readl(shirq->regs.base + shirq->regs.status_reg) & + shirq->regs.status_reg_mask)) { + for (i = 0; (i < shirq->dev_count) && val; i++) { + if (!(shirq->dev_config[i].status_mask & val)) + continue; + + generic_handle_irq(shirq->dev_config[i].virq); + + /* clear interrupt */ + val &= ~shirq->dev_config[i].status_mask; + if ((shirq->regs.clear_reg == -1) || + shirq->dev_config[i].clear_mask == -1) + continue; + mask = readl(shirq->regs.base + shirq->regs.clear_reg); + if (shirq->regs.reset_to_clear) + mask &= ~shirq->dev_config[i].clear_mask; + else + mask |= shirq->dev_config[i].clear_mask; + writel(mask, shirq->regs.base + shirq->regs.clear_reg); + } + } + desc->chip->unmask(irq); +} + +int spear_shirq_register(struct spear_shirq *shirq) +{ + int i; + + if (!shirq || !shirq->dev_config || !shirq->regs.base) + return -EFAULT; + + if (!shirq->dev_count) + return -EINVAL; + + set_irq_chained_handler(shirq->irq, shirq_handler); + for (i = 0; i < shirq->dev_count; i++) { + set_irq_chip(shirq->dev_config[i].virq, &shirq_chip); + set_irq_handler(shirq->dev_config[i].virq, handle_simple_irq); + set_irq_flags(shirq->dev_config[i].virq, IRQF_VALID); + set_irq_chip_data(shirq->dev_config[i].virq, shirq); + } + + set_irq_data(shirq->irq, shirq); + return 0; +} |