diff options
90 files changed, 863 insertions, 813 deletions
diff --git a/drivers/net/3c507.c b/drivers/net/3c507.c index fbc2311..77cf090 100644 --- a/drivers/net/3c507.c +++ b/drivers/net/3c507.c @@ -56,6 +56,7 @@ static const char version[] = #include <linux/errno.h> #include <linux/netdevice.h> #include <linux/etherdevice.h> +#include <linux/if_ether.h> #include <linux/skbuff.h> #include <linux/slab.h> #include <linux/init.h> @@ -734,8 +735,7 @@ static void init_82586_mem(struct net_device *dev) memcpy_toio(lp->base, init_words + 5, sizeof(init_words) - 10); /* Fill in the station address. */ - memcpy_toio(lp->base+SA_OFFSET, dev->dev_addr, - sizeof(dev->dev_addr)); + memcpy_toio(lp->base+SA_OFFSET, dev->dev_addr, ETH_ALEN); /* The Tx-block list is written as needed. We just set up the values. */ lp->tx_cmd_link = IDLELOOP + 4; diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index e58a653..dd9a09c 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2346,6 +2346,7 @@ config GELIC_NET config GELIC_WIRELESS bool "PS3 Wireless support" + depends on WLAN depends on GELIC_NET select WIRELESS_EXT help @@ -2358,6 +2359,7 @@ config GELIC_WIRELESS config GELIC_WIRELESS_OLD_PSK_INTERFACE bool "PS3 Wireless private PSK interface (OBSOLETE)" depends on GELIC_WIRELESS + select WEXT_PRIV help This option retains the obsolete private interface to pass the PSK from user space programs to the driver. The PSK diff --git a/drivers/net/benet/be.h b/drivers/net/benet/be.h index 9e56014..9fd8e5e 100644 --- a/drivers/net/benet/be.h +++ b/drivers/net/benet/be.h @@ -275,6 +275,7 @@ struct be_adapter { u32 tx_fc; /* Tx flow control */ int link_speed; u8 port_type; + u8 transceiver; }; extern const struct ethtool_ops be_ethtool_ops; diff --git a/drivers/net/benet/be_cmds.c b/drivers/net/benet/be_cmds.c index 1b68bd9..102ade1 100644 --- a/drivers/net/benet/be_cmds.c +++ b/drivers/net/benet/be_cmds.c @@ -1479,6 +1479,41 @@ err: return status; } +int be_cmd_set_loopback(struct be_adapter *adapter, u8 port_num, + u8 loopback_type, u8 enable) +{ + struct be_mcc_wrb *wrb; + struct be_cmd_req_set_lmode *req; + int status; + + spin_lock_bh(&adapter->mcc_lock); + + wrb = wrb_from_mccq(adapter); + if (!wrb) { + status = -EBUSY; + goto err; + } + + req = embedded_payload(wrb); + + be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0, + OPCODE_LOWLEVEL_SET_LOOPBACK_MODE); + + be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_LOWLEVEL, + OPCODE_LOWLEVEL_SET_LOOPBACK_MODE, + sizeof(*req)); + + req->src_port = port_num; + req->dest_port = port_num; + req->loopback_type = loopback_type; + req->loopback_state = enable; + + status = be_mcc_notify_wait(adapter); +err: + spin_unlock_bh(&adapter->mcc_lock); + return status; +} + int be_cmd_loopback_test(struct be_adapter *adapter, u32 port_num, u32 loopback_type, u32 pkt_size, u32 num_pkts, u64 pattern) { @@ -1501,6 +1536,7 @@ int be_cmd_loopback_test(struct be_adapter *adapter, u32 port_num, be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_LOWLEVEL, OPCODE_LOWLEVEL_LOOPBACK_TEST, sizeof(*req)); + req->hdr.timeout = 4; req->pattern = cpu_to_le64(pattern); req->src_port = cpu_to_le32(port_num); diff --git a/drivers/net/benet/be_cmds.h b/drivers/net/benet/be_cmds.h index 92b87ef..c002b83 100644 --- a/drivers/net/benet/be_cmds.h +++ b/drivers/net/benet/be_cmds.h @@ -155,6 +155,7 @@ struct be_mcc_mailbox { #define OPCODE_LOWLEVEL_HOST_DDR_DMA 17 #define OPCODE_LOWLEVEL_LOOPBACK_TEST 18 +#define OPCODE_LOWLEVEL_SET_LOOPBACK_MODE 19 struct be_cmd_req_hdr { u8 opcode; /* dword 0 */ @@ -821,6 +822,19 @@ struct be_cmd_resp_loopback_test { u32 ticks_compl; }; +struct be_cmd_req_set_lmode { + struct be_cmd_req_hdr hdr; + u8 src_port; + u8 dest_port; + u8 loopback_type; + u8 loopback_state; +}; + +struct be_cmd_resp_set_lmode { + struct be_cmd_resp_hdr resp_hdr; + u8 rsvd0[4]; +}; + /********************** DDR DMA test *********************/ struct be_cmd_req_ddrdma_test { struct be_cmd_req_hdr hdr; @@ -912,3 +926,5 @@ extern int be_cmd_loopback_test(struct be_adapter *adapter, u32 port_num, u32 num_pkts, u64 pattern); extern int be_cmd_ddr_dma_test(struct be_adapter *adapter, u64 pattern, u32 byte_cnt, struct be_dma_mem *cmd); +extern int be_cmd_set_loopback(struct be_adapter *adapter, u8 port_num, + u8 loopback_type, u8 enable); diff --git a/drivers/net/benet/be_ethtool.c b/drivers/net/benet/be_ethtool.c index 298b92c..5d001c4 100644 --- a/drivers/net/benet/be_ethtool.c +++ b/drivers/net/benet/be_ethtool.c @@ -118,6 +118,7 @@ static const char et_self_tests[][ETH_GSTRING_LEN] = { #define BE_MAC_LOOPBACK 0x0 #define BE_PHY_LOOPBACK 0x1 #define BE_ONE_PORT_EXT_LOOPBACK 0x2 +#define BE_NO_LOOPBACK 0xff static void be_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *drvinfo) @@ -339,28 +340,50 @@ static int be_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) status = be_cmd_read_port_type(adapter, adapter->port_num, &connector); - switch (connector) { - case 7: - ecmd->port = PORT_FIBRE; - break; - default: - ecmd->port = PORT_TP; - break; + if (!status) { + switch (connector) { + case 7: + ecmd->port = PORT_FIBRE; + ecmd->transceiver = XCVR_EXTERNAL; + break; + case 0: + ecmd->port = PORT_TP; + ecmd->transceiver = XCVR_EXTERNAL; + break; + default: + ecmd->port = PORT_TP; + ecmd->transceiver = XCVR_INTERNAL; + break; + } + } else { + ecmd->port = PORT_AUI; + ecmd->transceiver = XCVR_INTERNAL; } /* Save for future use */ adapter->link_speed = ecmd->speed; adapter->port_type = ecmd->port; + adapter->transceiver = ecmd->transceiver; } else { ecmd->speed = adapter->link_speed; ecmd->port = adapter->port_type; + ecmd->transceiver = adapter->transceiver; } ecmd->duplex = DUPLEX_FULL; ecmd->autoneg = AUTONEG_DISABLE; - ecmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_TP); ecmd->phy_address = adapter->port_num; - ecmd->transceiver = XCVR_INTERNAL; + switch (ecmd->port) { + case PORT_FIBRE: + ecmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE); + break; + case PORT_TP: + ecmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_TP); + break; + case PORT_AUI: + ecmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_AUI); + break; + } return 0; } @@ -489,6 +512,19 @@ err: return ret; } +static u64 be_loopback_test(struct be_adapter *adapter, u8 loopback_type, + u64 *status) +{ + be_cmd_set_loopback(adapter, adapter->port_num, + loopback_type, 1); + *status = be_cmd_loopback_test(adapter, adapter->port_num, + loopback_type, 1500, + 2, 0xabc); + be_cmd_set_loopback(adapter, adapter->port_num, + BE_NO_LOOPBACK, 1); + return *status; +} + static void be_self_test(struct net_device *netdev, struct ethtool_test *test, u64 *data) { @@ -497,23 +533,18 @@ be_self_test(struct net_device *netdev, struct ethtool_test *test, u64 *data) memset(data, 0, sizeof(u64) * ETHTOOL_TESTS_NUM); if (test->flags & ETH_TEST_FL_OFFLINE) { - data[0] = be_cmd_loopback_test(adapter, adapter->port_num, - BE_MAC_LOOPBACK, 1500, - 2, 0xabc); - if (data[0] != 0) + if (be_loopback_test(adapter, BE_MAC_LOOPBACK, + &data[0]) != 0) { test->flags |= ETH_TEST_FL_FAILED; - - data[1] = be_cmd_loopback_test(adapter, adapter->port_num, - BE_PHY_LOOPBACK, 1500, - 2, 0xabc); - if (data[1] != 0) + } + if (be_loopback_test(adapter, BE_PHY_LOOPBACK, + &data[1]) != 0) { test->flags |= ETH_TEST_FL_FAILED; - - data[2] = be_cmd_loopback_test(adapter, adapter->port_num, - BE_ONE_PORT_EXT_LOOPBACK, - 1500, 2, 0xabc); - if (data[2] != 0) + } + if (be_loopback_test(adapter, BE_ONE_PORT_EXT_LOOPBACK, + &data[2]) != 0) { test->flags |= ETH_TEST_FL_FAILED; + } data[3] = be_test_ddr_dma(adapter); if (data[3] != 0) diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index 77ba135..306c2b8 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -7593,6 +7593,8 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode) if (bp->cnic_eth_dev.drv_state & CNIC_DRV_STATE_REGD) { bnx2x_set_iscsi_eth_mac_addr(bp, 1); bp->cnic_flags |= BNX2X_CNIC_FLAG_MAC_SET; + bnx2x_init_sb(bp, bp->cnic_sb, bp->cnic_sb_mapping, + CNIC_SB_ID(bp)); } mutex_unlock(&bp->cnic_mutex); #endif diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c index 0fb7a49..822f586 100644 --- a/drivers/net/bonding/bond_3ad.c +++ b/drivers/net/bonding/bond_3ad.c @@ -1580,7 +1580,7 @@ static void ad_agg_selection_logic(struct aggregator *agg) // check if any partner replys if (best->is_individual) { pr_warning("%s: Warning: No 802.3ad response from the link partner for any adapters in the bond\n", - best->slave->dev->master->name); + best->slave ? best->slave->dev->master->name : "NULL"); } best->is_active = 1; diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index e0620d0..8bd3c9f 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -143,7 +143,6 @@ void gfar_start(struct net_device *dev); static void gfar_clear_exact_match(struct net_device *dev); static void gfar_set_mac_for_addr(struct net_device *dev, int num, u8 *addr); static int gfar_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); -u16 gfar_select_queue(struct net_device *dev, struct sk_buff *skb); MODULE_AUTHOR("Freescale Semiconductor, Inc"); MODULE_DESCRIPTION("Gianfar Ethernet Driver"); @@ -455,7 +454,6 @@ static const struct net_device_ops gfar_netdev_ops = { .ndo_set_multicast_list = gfar_set_multi, .ndo_tx_timeout = gfar_timeout, .ndo_do_ioctl = gfar_ioctl, - .ndo_select_queue = gfar_select_queue, .ndo_get_stats = gfar_get_stats, .ndo_vlan_rx_register = gfar_vlan_rx_register, .ndo_set_mac_address = eth_mac_addr, @@ -506,10 +504,6 @@ static inline int gfar_uses_fcb(struct gfar_private *priv) return priv->vlgrp || priv->rx_csum_enable; } -u16 gfar_select_queue(struct net_device *dev, struct sk_buff *skb) -{ - return skb_get_queue_mapping(skb); -} static void free_tx_pointers(struct gfar_private *priv) { int i = 0; @@ -2470,10 +2464,11 @@ static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb, fcb = (struct rxfcb *)skb->data; /* Remove the FCB from the skb */ - skb_set_queue_mapping(skb, fcb->rq); /* Remove the padded bytes, if there are any */ - if (amount_pull) + if (amount_pull) { + skb_record_rx_queue(skb, fcb->rq); skb_pull(skb, amount_pull); + } if (priv->rx_csum_enable) gfar_rx_checksum(skb, fcb); @@ -2554,7 +2549,7 @@ int gfar_clean_rx_ring(struct gfar_priv_rx_q *rx_queue, int rx_work_limit) /* Remove the FCS from the packet length */ skb_put(skb, pkt_len); rx_queue->stats.rx_bytes += pkt_len; - + skb_record_rx_queue(skb, rx_queue->qindex); gfar_process_frame(dev, skb, amount_pull); } else { diff --git a/drivers/net/ibmlana.c b/drivers/net/ibmlana.c index 090a6d3..052c740 100644 --- a/drivers/net/ibmlana.c +++ b/drivers/net/ibmlana.c @@ -87,6 +87,7 @@ History: #include <linux/module.h> #include <linux/netdevice.h> #include <linux/etherdevice.h> +#include <linux/if_ether.h> #include <linux/skbuff.h> #include <linux/bitops.h> @@ -988,7 +989,7 @@ static int __devinit ibmlana_init_one(struct device *kdev) /* copy out MAC address */ - for (z = 0; z < sizeof(dev->dev_addr); z++) + for (z = 0; z < ETH_ALEN; z++) dev->dev_addr[z] = inb(dev->base_addr + MACADDRPROM + z); /* print config */ diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c index e8e9e91..c505b50d 100644 --- a/drivers/net/igb/e1000_82575.c +++ b/drivers/net/igb/e1000_82575.c @@ -1096,9 +1096,7 @@ static s32 igb_setup_serdes_link_82575(struct e1000_hw *hw) hw_dbg("Configuring Autoneg:PCS_LCTL=0x%08X\n", reg); } else { /* Set PCS register for forced link */ - reg |= E1000_PCS_LCTL_FSD | /* Force Speed */ - E1000_PCS_LCTL_FORCE_LINK | /* Force Link */ - E1000_PCS_LCTL_FLV_LINK_UP; /* Force link value up */ + reg |= E1000_PCS_LCTL_FSD; /* Force Speed */ hw_dbg("Configuring Forced Link:PCS_LCTL=0x%08X\n", reg); } diff --git a/drivers/net/igb/e1000_phy.c b/drivers/net/igb/e1000_phy.c index 5c9d73e..3670a66 100644 --- a/drivers/net/igb/e1000_phy.c +++ b/drivers/net/igb/e1000_phy.c @@ -457,15 +457,6 @@ s32 igb_copper_link_setup_82580(struct e1000_hw *hw) phy_data |= I82580_CFG_ENABLE_DOWNSHIFT; ret_val = phy->ops.write_reg(hw, I82580_CFG_REG, phy_data); - if (ret_val) - goto out; - - /* Set number of link attempts before downshift */ - ret_val = phy->ops.read_reg(hw, I82580_CTRL_REG, &phy_data); - if (ret_val) - goto out; - phy_data &= ~I82580_CTRL_DOWNSHIFT_MASK; - ret_val = phy->ops.write_reg(hw, I82580_CTRL_REG, phy_data); out: return ret_val; diff --git a/drivers/net/igb/igb_ethtool.c b/drivers/net/igb/igb_ethtool.c index ac9d527..f771a6c 100644 --- a/drivers/net/igb/igb_ethtool.c +++ b/drivers/net/igb/igb_ethtool.c @@ -1795,7 +1795,7 @@ static int igb_wol_exclusion(struct igb_adapter *adapter, /* dual port cards only support WoL on port A from now on * unless it was enabled in the eeprom for port B * so exclude FUNC_1 ports from having WoL enabled */ - if (rd32(E1000_STATUS) & E1000_STATUS_FUNC_1 && + if ((rd32(E1000_STATUS) & E1000_STATUS_FUNC_MASK) && !adapter->eeprom_wol) { wol->supported = 0; break; diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index 78963a0..933c64f 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -1306,13 +1306,8 @@ void igb_reset(struct igb_adapter *adapter) hwm = min(((pba << 10) * 9 / 10), ((pba << 10) - 2 * adapter->max_frame_size)); - if (mac->type < e1000_82576) { - fc->high_water = hwm & 0xFFF8; /* 8-byte granularity */ - fc->low_water = fc->high_water - 8; - } else { - fc->high_water = hwm & 0xFFF0; /* 16-byte granularity */ - fc->low_water = fc->high_water - 16; - } + fc->high_water = hwm & 0xFFF0; /* 16-byte granularity */ + fc->low_water = fc->high_water - 16; fc->pause_time = 0xFFFF; fc->send_xon = 1; fc->current_mode = fc->requested_mode; diff --git a/drivers/net/igbvf/netdev.c b/drivers/net/igbvf/netdev.c index e9dd95f..0dbd032 100644 --- a/drivers/net/igbvf/netdev.c +++ b/drivers/net/igbvf/netdev.c @@ -2763,7 +2763,8 @@ static int __devinit igbvf_probe(struct pci_dev *pdev, err = hw->mac.ops.reset_hw(hw); if (err) { dev_info(&pdev->dev, - "PF still in reset state, assigning new address\n"); + "PF still in reset state, assigning new address." + " Is the PF interface up?\n"); random_ether_addr(hw->mac.addr); } else { err = hw->mac.ops.read_mac_addr(hw); diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index bd64387..1a2ea62 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -4373,6 +4373,11 @@ static int ixgbe_resume(struct pci_dev *pdev) pci_set_power_state(pdev, PCI_D0); pci_restore_state(pdev); + /* + * pci_restore_state clears dev->state_saved so call + * pci_save_state to restore it. + */ + pci_save_state(pdev); err = pci_enable_device_mem(pdev); if (err) { diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c index dcc67a3..e154677 100644 --- a/drivers/net/pcnet32.c +++ b/drivers/net/pcnet32.c @@ -45,6 +45,7 @@ static const char *const version = #include <linux/crc32.h> #include <linux/netdevice.h> #include <linux/etherdevice.h> +#include <linux/if_ether.h> #include <linux/skbuff.h> #include <linux/spinlock.h> #include <linux/moduleparam.h> @@ -1765,7 +1766,7 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev) /* if the ethernet address is not valid, force to 00:00:00:00:00:00 */ if (!is_valid_ether_addr(dev->perm_addr)) - memset(dev->dev_addr, 0, sizeof(dev->dev_addr)); + memset(dev->dev_addr, 0, ETH_ALEN); if (pcnet32_debug & NETIF_MSG_PROBE) { printk(" %pM", dev->dev_addr); diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c index f983e3b..103e8b0 100644 --- a/drivers/net/sfc/efx.c +++ b/drivers/net/sfc/efx.c @@ -741,14 +741,14 @@ static int efx_probe_port(struct efx_nic *efx) EFX_LOG(efx, "create port\n"); + if (phy_flash_cfg) + efx->phy_mode = PHY_MODE_SPECIAL; + /* Connect up MAC/PHY operations table */ rc = efx->type->probe_port(efx); if (rc) goto err; - if (phy_flash_cfg) - efx->phy_mode = PHY_MODE_SPECIAL; - /* Sanity check MAC address */ if (is_valid_ether_addr(efx->mac_address)) { memcpy(efx->net_dev->dev_addr, efx->mac_address, ETH_ALEN); diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c index 17afcd2..9d009c4 100644 --- a/drivers/net/sfc/falcon.c +++ b/drivers/net/sfc/falcon.c @@ -925,6 +925,7 @@ static int falcon_probe_port(struct efx_nic *efx) static void falcon_remove_port(struct efx_nic *efx) { + efx->phy_op->remove(efx); efx_nic_free_buffer(efx, &efx->stats_buffer); } diff --git a/drivers/net/sfc/falcon_xmac.c b/drivers/net/sfc/falcon_xmac.c index 3da933f..8ccab2c 100644 --- a/drivers/net/sfc/falcon_xmac.c +++ b/drivers/net/sfc/falcon_xmac.c @@ -111,16 +111,12 @@ static void falcon_mask_status_intr(struct efx_nic *efx, bool enable) efx_writeo(efx, ®, FR_AB_XM_MGT_INT_MASK); } -/* Get status of XAUI link */ -static bool falcon_xaui_link_ok(struct efx_nic *efx) +static bool falcon_xgxs_link_ok(struct efx_nic *efx) { efx_oword_t reg; bool align_done, link_ok = false; int sync_status; - if (LOOPBACK_INTERNAL(efx)) - return true; - /* Read link status */ efx_reado(efx, ®, FR_AB_XX_CORE_STAT); @@ -135,14 +131,24 @@ static bool falcon_xaui_link_ok(struct efx_nic *efx) EFX_SET_OWORD_FIELD(reg, FRF_AB_XX_DISPERR, FFE_AB_XX_STAT_ALL_LANES); efx_writeo(efx, ®, FR_AB_XX_CORE_STAT); - /* If the link is up, then check the phy side of the xaui link */ - if (efx->link_state.up && link_ok) - if (efx->mdio.mmds & (1 << MDIO_MMD_PHYXS)) - link_ok = efx_mdio_phyxgxs_lane_sync(efx); - return link_ok; } +static bool falcon_xmac_link_ok(struct efx_nic *efx) +{ + /* + * Check MAC's XGXS link status except when using XGMII loopback + * which bypasses the XGXS block. + * If possible, check PHY's XGXS link status except when using + * MAC loopback. + */ + return (efx->loopback_mode == LOOPBACK_XGMII || + falcon_xgxs_link_ok(efx)) && + (!(efx->mdio.mmds & (1 << MDIO_MMD_PHYXS)) || + LOOPBACK_INTERNAL(efx) || + efx_mdio_phyxgxs_lane_sync(efx)); +} + void falcon_reconfigure_xmac_core(struct efx_nic *efx) { unsigned int max_frame_len; @@ -245,9 +251,9 @@ static void falcon_reconfigure_xgxs_core(struct efx_nic *efx) /* Try to bring up the Falcon side of the Falcon-Phy XAUI link */ -static bool falcon_check_xaui_link_up(struct efx_nic *efx, int tries) +static bool falcon_xmac_link_ok_retry(struct efx_nic *efx, int tries) { - bool mac_up = falcon_xaui_link_ok(efx); + bool mac_up = falcon_xmac_link_ok(efx); if (LOOPBACK_MASK(efx) & LOOPBACKS_EXTERNAL(efx) & LOOPBACKS_WS || efx_phy_mode_disabled(efx->phy_mode)) @@ -261,7 +267,7 @@ static bool falcon_check_xaui_link_up(struct efx_nic *efx, int tries) falcon_reset_xaui(efx); udelay(200); - mac_up = falcon_xaui_link_ok(efx); + mac_up = falcon_xmac_link_ok(efx); --tries; } @@ -272,7 +278,7 @@ static bool falcon_check_xaui_link_up(struct efx_nic *efx, int tries) static bool falcon_xmac_check_fault(struct efx_nic *efx) { - return !falcon_check_xaui_link_up(efx, 5); + return !falcon_xmac_link_ok_retry(efx, 5); } static int falcon_reconfigure_xmac(struct efx_nic *efx) @@ -284,7 +290,7 @@ static int falcon_reconfigure_xmac(struct efx_nic *efx) falcon_reconfigure_mac_wrapper(efx); - efx->xmac_poll_required = !falcon_check_xaui_link_up(efx, 5); + efx->xmac_poll_required = !falcon_xmac_link_ok_retry(efx, 5); falcon_mask_status_intr(efx, true); return 0; @@ -357,7 +363,7 @@ void falcon_poll_xmac(struct efx_nic *efx) return; falcon_mask_status_intr(efx, false); - efx->xmac_poll_required = !falcon_check_xaui_link_up(efx, 1); + efx->xmac_poll_required = !falcon_xmac_link_ok_retry(efx, 1); falcon_mask_status_intr(efx, true); } diff --git a/drivers/net/sfc/mcdi_phy.c b/drivers/net/sfc/mcdi_phy.c index 0e1bcc5..eb694af 100644 --- a/drivers/net/sfc/mcdi_phy.c +++ b/drivers/net/sfc/mcdi_phy.c @@ -304,31 +304,47 @@ static u32 mcdi_to_ethtool_media(u32 media) static int efx_mcdi_phy_probe(struct efx_nic *efx) { - struct efx_mcdi_phy_cfg *phy_cfg; + struct efx_mcdi_phy_cfg *phy_data; + u8 outbuf[MC_CMD_GET_LINK_OUT_LEN]; + u32 caps; int rc; - /* TODO: Move phy_data initialisation to - * phy_op->probe/remove, rather than init/fini */ - phy_cfg = kzalloc(sizeof(*phy_cfg), GFP_KERNEL); - if (phy_cfg == NULL) { - rc = -ENOMEM; - goto fail_alloc; - } - rc = efx_mcdi_get_phy_cfg(efx, phy_cfg); + /* Initialise and populate phy_data */ + phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL); + if (phy_data == NULL) + return -ENOMEM; + + rc = efx_mcdi_get_phy_cfg(efx, phy_data); if (rc != 0) goto fail; - efx->phy_type = phy_cfg->type; + /* Read initial link advertisement */ + BUILD_BUG_ON(MC_CMD_GET_LINK_IN_LEN != 0); + rc = efx_mcdi_rpc(efx, MC_CMD_GET_LINK, NULL, 0, + outbuf, sizeof(outbuf), NULL); + if (rc) + goto fail; + + /* Fill out nic state */ + efx->phy_data = phy_data; + efx->phy_type = phy_data->type; - efx->mdio_bus = phy_cfg->channel; - efx->mdio.prtad = phy_cfg->port; - efx->mdio.mmds = phy_cfg->mmd_mask & ~(1 << MC_CMD_MMD_CLAUSE22); + efx->mdio_bus = phy_data->channel; + efx->mdio.prtad = phy_data->port; + efx->mdio.mmds = phy_data->mmd_mask & ~(1 << MC_CMD_MMD_CLAUSE22); efx->mdio.mode_support = 0; - if (phy_cfg->mmd_mask & (1 << MC_CMD_MMD_CLAUSE22)) + if (phy_data->mmd_mask & (1 << MC_CMD_MMD_CLAUSE22)) efx->mdio.mode_support |= MDIO_SUPPORTS_C22; - if (phy_cfg->mmd_mask & ~(1 << MC_CMD_MMD_CLAUSE22)) + if (phy_data->mmd_mask & ~(1 << MC_CMD_MMD_CLAUSE22)) efx->mdio.mode_support |= MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22; + caps = MCDI_DWORD(outbuf, GET_LINK_OUT_CAP); + if (caps & (1 << MC_CMD_PHY_CAP_AN_LBN)) + efx->link_advertising = + mcdi_to_ethtool_cap(phy_data->media, caps); + else + phy_data->forced_cap = caps; + /* Assert that we can map efx -> mcdi loopback modes */ BUILD_BUG_ON(LOOPBACK_NONE != MC_CMD_LOOPBACK_NONE); BUILD_BUG_ON(LOOPBACK_DATA != MC_CMD_LOOPBACK_DATA); @@ -365,46 +381,6 @@ static int efx_mcdi_phy_probe(struct efx_nic *efx) * but by convention we don't */ efx->loopback_modes &= ~(1 << LOOPBACK_NONE); - kfree(phy_cfg); - - return 0; - -fail: - kfree(phy_cfg); -fail_alloc: - return rc; -} - -static int efx_mcdi_phy_init(struct efx_nic *efx) -{ - struct efx_mcdi_phy_cfg *phy_data; - u8 outbuf[MC_CMD_GET_LINK_OUT_LEN]; - u32 caps; - int rc; - - phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL); - if (phy_data == NULL) - return -ENOMEM; - - rc = efx_mcdi_get_phy_cfg(efx, phy_data); - if (rc != 0) - goto fail; - - efx->phy_data = phy_data; - - BUILD_BUG_ON(MC_CMD_GET_LINK_IN_LEN != 0); - rc = efx_mcdi_rpc(efx, MC_CMD_GET_LINK, NULL, 0, - outbuf, sizeof(outbuf), NULL); - if (rc) - goto fail; - - caps = MCDI_DWORD(outbuf, GET_LINK_OUT_CAP); - if (caps & (1 << MC_CMD_PHY_CAP_AN_LBN)) - efx->link_advertising = - mcdi_to_ethtool_cap(phy_data->media, caps); - else - phy_data->forced_cap = caps; - return 0; fail: @@ -504,7 +480,7 @@ static bool efx_mcdi_phy_poll(struct efx_nic *efx) return !efx_link_state_equal(&efx->link_state, &old_state); } -static void efx_mcdi_phy_fini(struct efx_nic *efx) +static void efx_mcdi_phy_remove(struct efx_nic *efx) { struct efx_mcdi_phy_data *phy_data = efx->phy_data; @@ -586,10 +562,11 @@ static int efx_mcdi_phy_set_settings(struct efx_nic *efx, struct ethtool_cmd *ec struct efx_phy_operations efx_mcdi_phy_ops = { .probe = efx_mcdi_phy_probe, - .init = efx_mcdi_phy_init, + .init = efx_port_dummy_op_int, .reconfigure = efx_mcdi_phy_reconfigure, .poll = efx_mcdi_phy_poll, - .fini = efx_mcdi_phy_fini, + .fini = efx_port_dummy_op_void, + .remove = efx_mcdi_phy_remove, .get_settings = efx_mcdi_phy_get_settings, .set_settings = efx_mcdi_phy_set_settings, .run_tests = NULL, diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h index 34c381f..d5aab5b 100644 --- a/drivers/net/sfc/net_driver.h +++ b/drivers/net/sfc/net_driver.h @@ -524,6 +524,7 @@ struct efx_phy_operations { int (*probe) (struct efx_nic *efx); int (*init) (struct efx_nic *efx); void (*fini) (struct efx_nic *efx); + void (*remove) (struct efx_nic *efx); int (*reconfigure) (struct efx_nic *efx); bool (*poll) (struct efx_nic *efx); void (*get_settings) (struct efx_nic *efx, diff --git a/drivers/net/sfc/nic.c b/drivers/net/sfc/nic.c index a577be2..db44224 100644 --- a/drivers/net/sfc/nic.c +++ b/drivers/net/sfc/nic.c @@ -1576,6 +1576,8 @@ void efx_nic_init_common(struct efx_nic *efx) EFX_SET_OWORD_FIELD(temp, FRF_AZ_TX_SOFT_EVT_EN, 1); /* Prefetch threshold 2 => fetch when descriptor cache half empty */ EFX_SET_OWORD_FIELD(temp, FRF_AZ_TX_PREF_THRESHOLD, 2); + /* Disable hardware watchdog which can misfire */ + EFX_SET_OWORD_FIELD(temp, FRF_AZ_TX_PREF_WD_TMR, 0x3fffff); /* Squash TX of packets of 16 bytes or less */ if (efx_nic_rev(efx) >= EFX_REV_FALCON_B0) EFX_SET_OWORD_FIELD(temp, FRF_BZ_TX_FLUSH_MIN_LEN_EN, 1); diff --git a/drivers/net/sfc/qt202x_phy.c b/drivers/net/sfc/qt202x_phy.c index 3800fc7..ff8f0a4 100644 --- a/drivers/net/sfc/qt202x_phy.c +++ b/drivers/net/sfc/qt202x_phy.c @@ -33,6 +33,9 @@ #define PCS_FW_HEARTBEAT_REG 0xd7ee #define PCS_FW_HEARTB_LBN 0 #define PCS_FW_HEARTB_WIDTH 8 +#define PCS_FW_PRODUCT_CODE_1 0xd7f0 +#define PCS_FW_VERSION_1 0xd7f3 +#define PCS_FW_BUILD_1 0xd7f6 #define PCS_UC8051_STATUS_REG 0xd7fd #define PCS_UC_STATUS_LBN 0 #define PCS_UC_STATUS_WIDTH 8 @@ -52,14 +55,24 @@ void falcon_qt202x_set_led(struct efx_nic *p, int led, int mode) struct qt202x_phy_data { enum efx_phy_mode phy_mode; + bool bug17190_in_bad_state; + unsigned long bug17190_timer; + u32 firmware_ver; }; #define QT2022C2_MAX_RESET_TIME 500 #define QT2022C2_RESET_WAIT 10 -static int qt2025c_wait_reset(struct efx_nic *efx) +#define QT2025C_MAX_HEARTB_TIME (5 * HZ) +#define QT2025C_HEARTB_WAIT 100 +#define QT2025C_MAX_FWSTART_TIME (25 * HZ / 10) +#define QT2025C_FWSTART_WAIT 100 + +#define BUG17190_INTERVAL (2 * HZ) + +static int qt2025c_wait_heartbeat(struct efx_nic *efx) { - unsigned long timeout = jiffies + 10 * HZ; + unsigned long timeout = jiffies + QT2025C_MAX_HEARTB_TIME; int reg, old_counter = 0; /* Wait for firmware heartbeat to start */ @@ -74,11 +87,25 @@ static int qt2025c_wait_reset(struct efx_nic *efx) old_counter = counter; else if (counter != old_counter) break; - if (time_after(jiffies, timeout)) + if (time_after(jiffies, timeout)) { + /* Some cables have EEPROMs that conflict with the + * PHY's on-board EEPROM so it cannot load firmware */ + EFX_ERR(efx, "If an SFP+ direct attach cable is" + " connected, please check that it complies" + " with the SFP+ specification\n"); return -ETIMEDOUT; - msleep(10); + } + msleep(QT2025C_HEARTB_WAIT); } + return 0; +} + +static int qt2025c_wait_fw_status_good(struct efx_nic *efx) +{ + unsigned long timeout = jiffies + QT2025C_MAX_FWSTART_TIME; + int reg; + /* Wait for firmware status to look good */ for (;;) { reg = efx_mdio_read(efx, MDIO_MMD_PCS, PCS_UC8051_STATUS_REG); @@ -90,7 +117,178 @@ static int qt2025c_wait_reset(struct efx_nic *efx) break; if (time_after(jiffies, timeout)) return -ETIMEDOUT; + msleep(QT2025C_FWSTART_WAIT); + } + + return 0; +} + +static void qt2025c_restart_firmware(struct efx_nic *efx) +{ + /* Restart microcontroller execution of firmware from RAM */ + efx_mdio_write(efx, 3, 0xe854, 0x00c0); + efx_mdio_write(efx, 3, 0xe854, 0x0040); + msleep(50); +} + +static int qt2025c_wait_reset(struct efx_nic *efx) +{ + int rc; + + rc = qt2025c_wait_heartbeat(efx); + if (rc != 0) + return rc; + + rc = qt2025c_wait_fw_status_good(efx); + if (rc == -ETIMEDOUT) { + /* Bug 17689: occasionally heartbeat starts but firmware status + * code never progresses beyond 0x00. Try again, once, after + * restarting execution of the firmware image. */ + EFX_LOG(efx, "bashing QT2025C microcontroller\n"); + qt2025c_restart_firmware(efx); + rc = qt2025c_wait_heartbeat(efx); + if (rc != 0) + return rc; + rc = qt2025c_wait_fw_status_good(efx); + } + + return rc; +} + +static void qt2025c_firmware_id(struct efx_nic *efx) +{ + struct qt202x_phy_data *phy_data = efx->phy_data; + u8 firmware_id[9]; + size_t i; + + for (i = 0; i < sizeof(firmware_id); i++) + firmware_id[i] = efx_mdio_read(efx, MDIO_MMD_PCS, + PCS_FW_PRODUCT_CODE_1 + i); + EFX_INFO(efx, "QT2025C firmware %xr%d v%d.%d.%d.%d [20%02d-%02d-%02d]\n", + (firmware_id[0] << 8) | firmware_id[1], firmware_id[2], + firmware_id[3] >> 4, firmware_id[3] & 0xf, + firmware_id[4], firmware_id[5], + firmware_id[6], firmware_id[7], firmware_id[8]); + phy_data->firmware_ver = ((firmware_id[3] & 0xf0) << 20) | + ((firmware_id[3] & 0x0f) << 16) | + (firmware_id[4] << 8) | firmware_id[5]; +} + +static void qt2025c_bug17190_workaround(struct efx_nic *efx) +{ + struct qt202x_phy_data *phy_data = efx->phy_data; + + /* The PHY can get stuck in a state where it reports PHY_XS and PMA/PMD + * layers up, but PCS down (no block_lock). If we notice this state + * persisting for a couple of seconds, we switch PMA/PMD loopback + * briefly on and then off again, which is normally sufficient to + * recover it. + */ + if (efx->link_state.up || + !efx_mdio_links_ok(efx, MDIO_DEVS_PMAPMD | MDIO_DEVS_PHYXS)) { + phy_data->bug17190_in_bad_state = false; + return; + } + + if (!phy_data->bug17190_in_bad_state) { + phy_data->bug17190_in_bad_state = true; + phy_data->bug17190_timer = jiffies + BUG17190_INTERVAL; + return; + } + + if (time_after_eq(jiffies, phy_data->bug17190_timer)) { + EFX_LOG(efx, "bashing QT2025C PMA/PMD\n"); + efx_mdio_set_flag(efx, MDIO_MMD_PMAPMD, MDIO_CTRL1, + MDIO_PMA_CTRL1_LOOPBACK, true); msleep(100); + efx_mdio_set_flag(efx, MDIO_MMD_PMAPMD, MDIO_CTRL1, + MDIO_PMA_CTRL1_LOOPBACK, false); + phy_data->bug17190_timer = jiffies + BUG17190_INTERVAL; + } +} + +static int qt2025c_select_phy_mode(struct efx_nic *efx) +{ + struct qt202x_phy_data *phy_data = efx->phy_data; + struct falcon_board *board = falcon_board(efx); + int reg, rc, i; + uint16_t phy_op_mode; + + /* Only 2.0.1.0+ PHY firmware supports the more optimal SFP+ + * Self-Configure mode. Don't attempt any switching if we encounter + * older firmware. */ + if (phy_data->firmware_ver < 0x02000100) + return 0; + + /* In general we will get optimal behaviour in "SFP+ Self-Configure" + * mode; however, that powers down most of the PHY when no module is + * present, so we must use a different mode (any fixed mode will do) + * to be sure that loopbacks will work. */ + phy_op_mode = (efx->loopback_mode == LOOPBACK_NONE) ? 0x0038 : 0x0020; + + /* Only change mode if really necessary */ + reg = efx_mdio_read(efx, 1, 0xc319); + if ((reg & 0x0038) == phy_op_mode) + return 0; + EFX_LOG(efx, "Switching PHY to mode 0x%04x\n", phy_op_mode); + + /* This sequence replicates the register writes configured in the boot + * EEPROM (including the differences between board revisions), except + * that the operating mode is changed, and the PHY is prevented from + * unnecessarily reloading the main firmware image again. */ + efx_mdio_write(efx, 1, 0xc300, 0x0000); + /* (Note: this portion of the boot EEPROM sequence, which bit-bashes 9 + * STOPs onto the firmware/module I2C bus to reset it, varies across + * board revisions, as the bus is connected to different GPIO/LED + * outputs on the PHY.) */ + if (board->major == 0 && board->minor < 2) { + efx_mdio_write(efx, 1, 0xc303, 0x4498); + for (i = 0; i < 9; i++) { + efx_mdio_write(efx, 1, 0xc303, 0x4488); + efx_mdio_write(efx, 1, 0xc303, 0x4480); + efx_mdio_write(efx, 1, 0xc303, 0x4490); + efx_mdio_write(efx, 1, 0xc303, 0x4498); + } + } else { + efx_mdio_write(efx, 1, 0xc303, 0x0920); + efx_mdio_write(efx, 1, 0xd008, 0x0004); + for (i = 0; i < 9; i++) { + efx_mdio_write(efx, 1, 0xc303, 0x0900); + efx_mdio_write(efx, 1, 0xd008, 0x0005); + efx_mdio_write(efx, 1, 0xc303, 0x0920); + efx_mdio_write(efx, 1, 0xd008, 0x0004); + } + efx_mdio_write(efx, 1, 0xc303, 0x4900); + } + efx_mdio_write(efx, 1, 0xc303, 0x4900); + efx_mdio_write(efx, 1, 0xc302, 0x0004); + efx_mdio_write(efx, 1, 0xc316, 0x0013); + efx_mdio_write(efx, 1, 0xc318, 0x0054); + efx_mdio_write(efx, 1, 0xc319, phy_op_mode); + efx_mdio_write(efx, 1, 0xc31a, 0x0098); + efx_mdio_write(efx, 3, 0x0026, 0x0e00); + efx_mdio_write(efx, 3, 0x0027, 0x0013); + efx_mdio_write(efx, 3, 0x0028, 0xa528); + efx_mdio_write(efx, 1, 0xd006, 0x000a); + efx_mdio_write(efx, 1, 0xd007, 0x0009); + efx_mdio_write(efx, 1, 0xd008, 0x0004); + /* This additional write is not present in the boot EEPROM. It + * prevents the PHY's internal boot ROM doing another pointless (and + * slow) reload of the firmware image (the microcontroller's code + * memory is not affected by the microcontroller reset). */ + efx_mdio_write(efx, 1, 0xc317, 0x00ff); + efx_mdio_write(efx, 1, 0xc300, 0x0002); + msleep(20); + + /* Restart microcontroller execution of firmware from RAM */ + qt2025c_restart_firmware(efx); + + /* Wait for the microcontroller to be ready again */ + rc = qt2025c_wait_reset(efx); + if (rc < 0) { + EFX_ERR(efx, "PHY microcontroller reset during mode switch " + "timed out\n"); + return rc; } return 0; @@ -137,6 +335,16 @@ static int qt202x_reset_phy(struct efx_nic *efx) static int qt202x_phy_probe(struct efx_nic *efx) { + struct qt202x_phy_data *phy_data; + + phy_data = kzalloc(sizeof(struct qt202x_phy_data), GFP_KERNEL); + if (!phy_data) + return -ENOMEM; + efx->phy_data = phy_data; + phy_data->phy_mode = efx->phy_mode; + phy_data->bug17190_in_bad_state = false; + phy_data->bug17190_timer = 0; + efx->mdio.mmds = QT202X_REQUIRED_DEVS; efx->mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22; efx->loopback_modes = QT202X_LOOPBACKS | FALCON_XMAC_LOOPBACKS; @@ -145,7 +353,6 @@ static int qt202x_phy_probe(struct efx_nic *efx) static int qt202x_phy_init(struct efx_nic *efx) { - struct qt202x_phy_data *phy_data; u32 devid; int rc; @@ -155,17 +362,14 @@ static int qt202x_phy_init(struct efx_nic *efx) return rc; } - phy_data = kzalloc(sizeof(struct qt202x_phy_data), GFP_KERNEL); - if (!phy_data) - return -ENOMEM; - efx->phy_data = phy_data; - devid = efx_mdio_read_id(efx, MDIO_MMD_PHYXS); EFX_INFO(efx, "PHY ID reg %x (OUI %06x model %02x revision %x)\n", devid, efx_mdio_id_oui(devid), efx_mdio_id_model(devid), efx_mdio_id_rev(devid)); - phy_data->phy_mode = efx->phy_mode; + if (efx->phy_type == PHY_TYPE_QT2025C) + qt2025c_firmware_id(efx); + return 0; } @@ -183,6 +387,9 @@ static bool qt202x_phy_poll(struct efx_nic *efx) efx->link_state.fd = true; efx->link_state.fc = efx->wanted_fc; + if (efx->phy_type == PHY_TYPE_QT2025C) + qt2025c_bug17190_workaround(efx); + return efx->link_state.up != was_up; } @@ -191,6 +398,10 @@ static int qt202x_phy_reconfigure(struct efx_nic *efx) struct qt202x_phy_data *phy_data = efx->phy_data; if (efx->phy_type == PHY_TYPE_QT2025C) { + int rc = qt2025c_select_phy_mode(efx); + if (rc) + return rc; + /* There are several different register bits which can * disable TX (and save power) on direct-attach cables * or optical transceivers, varying somewhat between @@ -224,7 +435,7 @@ static void qt202x_phy_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecm mdio45_ethtool_gset(&efx->mdio, ecmd); } -static void qt202x_phy_fini(struct efx_nic *efx) +static void qt202x_phy_remove(struct efx_nic *efx) { /* Free the context block */ kfree(efx->phy_data); @@ -236,7 +447,8 @@ struct efx_phy_operations falcon_qt202x_phy_ops = { .init = qt202x_phy_init, .reconfigure = qt202x_phy_reconfigure, .poll = qt202x_phy_poll, - .fini = qt202x_phy_fini, + .fini = efx_port_dummy_op_void, + .remove = qt202x_phy_remove, .get_settings = qt202x_phy_get_settings, .set_settings = efx_mdio_set_settings, }; diff --git a/drivers/net/sfc/siena.c b/drivers/net/sfc/siena.c index de07a4f..f8c6771 100644 --- a/drivers/net/sfc/siena.c +++ b/drivers/net/sfc/siena.c @@ -133,6 +133,7 @@ static int siena_probe_port(struct efx_nic *efx) void siena_remove_port(struct efx_nic *efx) { + efx->phy_op->remove(efx); efx_nic_free_buffer(efx, &efx->stats_buffer); } diff --git a/drivers/net/sfc/tenxpress.c b/drivers/net/sfc/tenxpress.c index ca11572..3009c29 100644 --- a/drivers/net/sfc/tenxpress.c +++ b/drivers/net/sfc/tenxpress.c @@ -202,10 +202,14 @@ static ssize_t set_phy_short_reach(struct device *dev, int rc; rtnl_lock(); - efx_mdio_set_flag(efx, MDIO_MMD_PMAPMD, MDIO_PMA_10GBT_TXPWR, - MDIO_PMA_10GBT_TXPWR_SHORT, - count != 0 && *buf != '0'); - rc = efx_reconfigure_port(efx); + if (efx->state != STATE_RUNNING) { + rc = -EBUSY; + } else { + efx_mdio_set_flag(efx, MDIO_MMD_PMAPMD, MDIO_PMA_10GBT_TXPWR, + MDIO_PMA_10GBT_TXPWR_SHORT, + count != 0 && *buf != '0'); + rc = efx_reconfigure_port(efx); + } rtnl_unlock(); return rc < 0 ? rc : (ssize_t)count; @@ -298,36 +302,62 @@ static int tenxpress_init(struct efx_nic *efx) return 0; } -static int sfx7101_phy_probe(struct efx_nic *efx) +static int tenxpress_phy_probe(struct efx_nic *efx) { - efx->mdio.mmds = TENXPRESS_REQUIRED_DEVS; - efx->mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22; - efx->loopback_modes = SFX7101_LOOPBACKS | FALCON_XMAC_LOOPBACKS; - return 0; -} + struct tenxpress_phy_data *phy_data; + int rc; + + /* Allocate phy private storage */ + phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL); + if (!phy_data) + return -ENOMEM; + efx->phy_data = phy_data; + phy_data->phy_mode = efx->phy_mode; + + /* Create any special files */ + if (efx->phy_type == PHY_TYPE_SFT9001B) { + rc = device_create_file(&efx->pci_dev->dev, + &dev_attr_phy_short_reach); + if (rc) + goto fail; + } + + if (efx->phy_type == PHY_TYPE_SFX7101) { + efx->mdio.mmds = TENXPRESS_REQUIRED_DEVS; + efx->mdio.mode_support = MDIO_SUPPORTS_C45; + + efx->loopback_modes = SFX7101_LOOPBACKS | FALCON_XMAC_LOOPBACKS; + + efx->link_advertising = (ADVERTISED_TP | ADVERTISED_Autoneg | + ADVERTISED_10000baseT_Full); + } else { + efx->mdio.mmds = TENXPRESS_REQUIRED_DEVS; + efx->mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22; + + efx->loopback_modes = (SFT9001_LOOPBACKS | + FALCON_XMAC_LOOPBACKS | + FALCON_GMAC_LOOPBACKS); + + efx->link_advertising = (ADVERTISED_TP | ADVERTISED_Autoneg | + ADVERTISED_10000baseT_Full | + ADVERTISED_1000baseT_Full | + ADVERTISED_100baseT_Full); + } -static int sft9001_phy_probe(struct efx_nic *efx) -{ - efx->mdio.mmds = TENXPRESS_REQUIRED_DEVS; - efx->mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22; - efx->loopback_modes = (SFT9001_LOOPBACKS | FALCON_XMAC_LOOPBACKS | - FALCON_GMAC_LOOPBACKS); return 0; + +fail: + kfree(efx->phy_data); + efx->phy_data = NULL; + return rc; } static int tenxpress_phy_init(struct efx_nic *efx) { - struct tenxpress_phy_data *phy_data; - int rc = 0; + int rc; falcon_board(efx)->type->init_phy(efx); - phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL); - if (!phy_data) - return -ENOMEM; - efx->phy_data = phy_data; - phy_data->phy_mode = efx->phy_mode; - if (!(efx->phy_mode & PHY_MODE_SPECIAL)) { if (efx->phy_type == PHY_TYPE_SFT9001A) { int reg; @@ -341,44 +371,27 @@ static int tenxpress_phy_init(struct efx_nic *efx) rc = efx_mdio_wait_reset_mmds(efx, TENXPRESS_REQUIRED_DEVS); if (rc < 0) - goto fail; + return rc; rc = efx_mdio_check_mmds(efx, TENXPRESS_REQUIRED_DEVS, 0); if (rc < 0) - goto fail; + return rc; } rc = tenxpress_init(efx); if (rc < 0) - goto fail; + return rc; - /* Initialise advertising flags */ - efx->link_advertising = (ADVERTISED_TP | ADVERTISED_Autoneg | - ADVERTISED_10000baseT_Full); - if (efx->phy_type != PHY_TYPE_SFX7101) - efx->link_advertising |= (ADVERTISED_1000baseT_Full | - ADVERTISED_100baseT_Full); + /* Reinitialise flow control settings */ efx_link_set_wanted_fc(efx, efx->wanted_fc); efx_mdio_an_reconfigure(efx); - if (efx->phy_type == PHY_TYPE_SFT9001B) { - rc = device_create_file(&efx->pci_dev->dev, - &dev_attr_phy_short_reach); - if (rc) - goto fail; - } - schedule_timeout_uninterruptible(HZ / 5); /* 200ms */ /* Let XGXS and SerDes out of reset */ falcon_reset_xaui(efx); return 0; - - fail: - kfree(efx->phy_data); - efx->phy_data = NULL; - return rc; } /* Perform a "special software reset" on the PHY. The caller is @@ -589,25 +602,26 @@ static bool tenxpress_phy_poll(struct efx_nic *efx) return !efx_link_state_equal(&efx->link_state, &old_state); } -static void tenxpress_phy_fini(struct efx_nic *efx) +static void sfx7101_phy_fini(struct efx_nic *efx) { int reg; + /* Power down the LNPGA */ + reg = (1 << PMA_PMD_LNPGA_POWERDOWN_LBN); + efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG, reg); + + /* Waiting here ensures that the board fini, which can turn + * off the power to the PHY, won't get run until the LNPGA + * powerdown has been given long enough to complete. */ + schedule_timeout_uninterruptible(LNPGA_PDOWN_WAIT); /* 200 ms */ +} + +static void tenxpress_phy_remove(struct efx_nic *efx) +{ if (efx->phy_type == PHY_TYPE_SFT9001B) device_remove_file(&efx->pci_dev->dev, &dev_attr_phy_short_reach); - if (efx->phy_type == PHY_TYPE_SFX7101) { - /* Power down the LNPGA */ - reg = (1 << PMA_PMD_LNPGA_POWERDOWN_LBN); - efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG, reg); - - /* Waiting here ensures that the board fini, which can turn - * off the power to the PHY, won't get run until the LNPGA - * powerdown has been given long enough to complete. */ - schedule_timeout_uninterruptible(LNPGA_PDOWN_WAIT); /* 200 ms */ - } - kfree(efx->phy_data); efx->phy_data = NULL; } @@ -819,11 +833,12 @@ static void sft9001_set_npage_adv(struct efx_nic *efx, u32 advertising) } struct efx_phy_operations falcon_sfx7101_phy_ops = { - .probe = sfx7101_phy_probe, + .probe = tenxpress_phy_probe, .init = tenxpress_phy_init, .reconfigure = tenxpress_phy_reconfigure, .poll = tenxpress_phy_poll, - .fini = tenxpress_phy_fini, + .fini = sfx7101_phy_fini, + .remove = tenxpress_phy_remove, .get_settings = tenxpress_get_settings, .set_settings = tenxpress_set_settings, .set_npage_adv = sfx7101_set_npage_adv, @@ -832,11 +847,12 @@ struct efx_phy_operations falcon_sfx7101_phy_ops = { }; struct efx_phy_operations falcon_sft9001_phy_ops = { - .probe = sft9001_phy_probe, + .probe = tenxpress_phy_probe, .init = tenxpress_phy_init, .reconfigure = tenxpress_phy_reconfigure, .poll = tenxpress_phy_poll, - .fini = tenxpress_phy_fini, + .fini = efx_port_dummy_op_void, + .remove = tenxpress_phy_remove, .get_settings = tenxpress_get_settings, .set_settings = tenxpress_set_settings, .set_npage_adv = sft9001_set_npage_adv, diff --git a/drivers/net/sfc/tx.c b/drivers/net/sfc/tx.c index e669f94..a8b70ef 100644 --- a/drivers/net/sfc/tx.c +++ b/drivers/net/sfc/tx.c @@ -821,8 +821,6 @@ static void efx_enqueue_unwind(struct efx_tx_queue *tx_queue) EFX_TXQ_MASK]; efx_tsoh_free(tx_queue, buffer); EFX_BUG_ON_PARANOID(buffer->skb); - buffer->len = 0; - buffer->continuation = true; if (buffer->unmap_len) { unmap_addr = (buffer->dma_addr + buffer->len - buffer->unmap_len); @@ -836,6 +834,8 @@ static void efx_enqueue_unwind(struct efx_tx_queue *tx_queue) PCI_DMA_TODEVICE); buffer->unmap_len = 0; } + buffer->len = 0; + buffer->continuation = true; } } diff --git a/drivers/net/tun.c b/drivers/net/tun.c index 01e99f2..2834a01 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -849,13 +849,13 @@ static void tun_sock_write_space(struct sock *sk) if (sk->sk_sleep && waitqueue_active(sk->sk_sleep)) wake_up_interruptible_sync(sk->sk_sleep); - tun = container_of(sk, struct tun_sock, sk)->tun; + tun = tun_sk(sk)->tun; kill_fasync(&tun->fasync, SIGIO, POLL_OUT); } static void tun_sock_destruct(struct sock *sk) { - free_netdev(container_of(sk, struct tun_sock, sk)->tun->dev); + free_netdev(tun_sk(sk)->tun->dev); } static struct proto tun_proto = { @@ -990,7 +990,7 @@ static int tun_set_iff(struct net *net, struct file *file, struct ifreq *ifr) sk->sk_write_space = tun_sock_write_space; sk->sk_sndbuf = INT_MAX; - container_of(sk, struct tun_sock, sk)->tun = tun; + tun_sk(sk)->tun = tun; security_tun_dev_post_create(sk); diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c index afaf088..41ad2f3 100644 --- a/drivers/net/ucc_geth.c +++ b/drivers/net/ucc_geth.c @@ -1563,7 +1563,10 @@ static int ugeth_disable(struct ucc_geth_private *ugeth, enum comm_dir mode) static void ugeth_quiesce(struct ucc_geth_private *ugeth) { - /* Wait for and prevent any further xmits. */ + /* Prevent any further xmits, plus detach the device. */ + netif_device_detach(ugeth->ndev); + + /* Wait for any current xmits to finish. */ netif_tx_disable(ugeth->ndev); /* Disable the interrupt to avoid NAPI rescheduling. */ @@ -1577,7 +1580,7 @@ static void ugeth_activate(struct ucc_geth_private *ugeth) { napi_enable(&ugeth->napi); enable_irq(ugeth->ug_info->uf_info.irq); - netif_tx_wake_all_queues(ugeth->ndev); + netif_device_attach(ugeth->ndev); } /* Called every time the controller might need to be made @@ -1648,25 +1651,28 @@ static void adjust_link(struct net_device *dev) ugeth->oldspeed = phydev->speed; } - /* - * To change the MAC configuration we need to disable the - * controller. To do so, we have to either grab ugeth->lock, - * which is a bad idea since 'graceful stop' commands might - * take quite a while, or we can quiesce driver's activity. - */ - ugeth_quiesce(ugeth); - ugeth_disable(ugeth, COMM_DIR_RX_AND_TX); - - out_be32(&ug_regs->maccfg2, tempval); - out_be32(&uf_regs->upsmr, upsmr); - - ugeth_enable(ugeth, COMM_DIR_RX_AND_TX); - ugeth_activate(ugeth); - if (!ugeth->oldlink) { new_state = 1; ugeth->oldlink = 1; } + + if (new_state) { + /* + * To change the MAC configuration we need to disable + * the controller. To do so, we have to either grab + * ugeth->lock, which is a bad idea since 'graceful + * stop' commands might take quite a while, or we can + * quiesce driver's activity. + */ + ugeth_quiesce(ugeth); + ugeth_disable(ugeth, COMM_DIR_RX_AND_TX); + + out_be32(&ug_regs->maccfg2, tempval); + out_be32(&uf_regs->upsmr, upsmr); + + ugeth_enable(ugeth, COMM_DIR_RX_AND_TX); + ugeth_activate(ugeth); + } } else if (ugeth->oldlink) { new_state = 1; ugeth->oldlink = 0; @@ -3273,7 +3279,7 @@ static int ucc_geth_tx(struct net_device *dev, u8 txQ) /* Handle the transmitted buffer and release */ /* the BD to be used with the current frame */ - if ((bd == ugeth->txBd[txQ]) && (netif_queue_stopped(dev) == 0)) + if (bd == ugeth->txBd[txQ]) /* queue empty? */ break; dev->stats.tx_packets++; diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c index 593e01f..611b804 100644 --- a/drivers/net/via-rhine.c +++ b/drivers/net/via-rhine.c @@ -102,6 +102,7 @@ static const int multicast_filter_limit = 32; #include <linux/ethtool.h> #include <linux/crc32.h> #include <linux/bitops.h> +#include <linux/workqueue.h> #include <asm/processor.h> /* Processor type for cache alignment. */ #include <asm/io.h> #include <asm/irq.h> @@ -389,6 +390,7 @@ struct rhine_private { struct net_device *dev; struct napi_struct napi; spinlock_t lock; + struct work_struct reset_task; /* Frequently used values: keep some adjacent for cache effect. */ u32 quirks; @@ -407,6 +409,7 @@ struct rhine_private { static int mdio_read(struct net_device *dev, int phy_id, int location); static void mdio_write(struct net_device *dev, int phy_id, int location, int value); static int rhine_open(struct net_device *dev); +static void rhine_reset_task(struct work_struct *work); static void rhine_tx_timeout(struct net_device *dev); static netdev_tx_t rhine_start_tx(struct sk_buff *skb, struct net_device *dev); @@ -775,6 +778,8 @@ static int __devinit rhine_init_one(struct pci_dev *pdev, dev->irq = pdev->irq; spin_lock_init(&rp->lock); + INIT_WORK(&rp->reset_task, rhine_reset_task); + rp->mii_if.dev = dev; rp->mii_if.mdio_read = mdio_read; rp->mii_if.mdio_write = mdio_write; @@ -1179,22 +1184,18 @@ static int rhine_open(struct net_device *dev) return 0; } -static void rhine_tx_timeout(struct net_device *dev) +static void rhine_reset_task(struct work_struct *work) { - struct rhine_private *rp = netdev_priv(dev); - void __iomem *ioaddr = rp->base; - - printk(KERN_WARNING "%s: Transmit timed out, status %4.4x, PHY status " - "%4.4x, resetting...\n", - dev->name, ioread16(ioaddr + IntrStatus), - mdio_read(dev, rp->mii_if.phy_id, MII_BMSR)); + struct rhine_private *rp = container_of(work, struct rhine_private, + reset_task); + struct net_device *dev = rp->dev; /* protect against concurrent rx interrupts */ disable_irq(rp->pdev->irq); napi_disable(&rp->napi); - spin_lock(&rp->lock); + spin_lock_bh(&rp->lock); /* clear all descriptors */ free_tbufs(dev); @@ -1206,7 +1207,7 @@ static void rhine_tx_timeout(struct net_device *dev) rhine_chip_reset(dev); init_registers(dev); - spin_unlock(&rp->lock); + spin_unlock_bh(&rp->lock); enable_irq(rp->pdev->irq); dev->trans_start = jiffies; @@ -1214,6 +1215,19 @@ static void rhine_tx_timeout(struct net_device *dev) netif_wake_queue(dev); } +static void rhine_tx_timeout(struct net_device *dev) +{ + struct rhine_private *rp = netdev_priv(dev); + void __iomem *ioaddr = rp->base; + + printk(KERN_WARNING "%s: Transmit timed out, status %4.4x, PHY status " + "%4.4x, resetting...\n", + dev->name, ioread16(ioaddr + IntrStatus), + mdio_read(dev, rp->mii_if.phy_id, MII_BMSR)); + + schedule_work(&rp->reset_task); +} + static netdev_tx_t rhine_start_tx(struct sk_buff *skb, struct net_device *dev) { @@ -1830,10 +1844,11 @@ static int rhine_close(struct net_device *dev) struct rhine_private *rp = netdev_priv(dev); void __iomem *ioaddr = rp->base; - spin_lock_irq(&rp->lock); - - netif_stop_queue(dev); napi_disable(&rp->napi); + cancel_work_sync(&rp->reset_task); + netif_stop_queue(dev); + + spin_lock_irq(&rp->lock); if (debug > 1) printk(KERN_DEBUG "%s: Shutting down ethercard, " diff --git a/drivers/net/vxge/vxge-main.c b/drivers/net/vxge/vxge-main.c index f1c4b2a..0fdfd58 100644 --- a/drivers/net/vxge/vxge-main.c +++ b/drivers/net/vxge/vxge-main.c @@ -4087,21 +4087,21 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre) goto _exit0; } - if (!pci_set_dma_mask(pdev, 0xffffffffffffffffULL)) { + if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) { vxge_debug_ll_config(VXGE_TRACE, "%s : using 64bit DMA", __func__); high_dma = 1; if (pci_set_consistent_dma_mask(pdev, - 0xffffffffffffffffULL)) { + DMA_BIT_MASK(64))) { vxge_debug_init(VXGE_ERR, "%s : unable to obtain 64bit DMA for " "consistent allocations", __func__); ret = -ENOMEM; goto _exit1; } - } else if (!pci_set_dma_mask(pdev, 0xffffffffUL)) { + } else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) { vxge_debug_ll_config(VXGE_TRACE, "%s : using 32bit DMA", __func__); } else { diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index a4c086f..e63b7c4 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -1903,17 +1903,6 @@ accept: rxs->noise = sc->ah->ah_noise_floor; rxs->signal = rxs->noise + rs.rs_rssi; - /* An rssi of 35 indicates you should be able use - * 54 Mbps reliably. A more elaborate scheme can be used - * here but it requires a map of SNR/throughput for each - * possible mode used */ - rxs->qual = rs.rs_rssi * 100 / 35; - - /* rssi can be more than 35 though, anything above that - * should be considered at 100% */ - if (rxs->qual > 100) - rxs->qual = 100; - rxs->antenna = rs.rs_antenna; rxs->rate_idx = ath5k_hw_to_driver_rix(sc, rs.rs_rate); rxs->flag |= ath5k_rx_decrypted(sc, ds, skb, &rs); @@ -2381,6 +2370,9 @@ ath5k_init(struct ath5k_softc *sc) */ ath5k_stop_locked(sc); + /* Set PHY calibration interval */ + ah->ah_cal_intval = ath5k_calinterval; + /* * The basic interface to setting the hardware in a good * state is ``reset''. On return the hardware is known to @@ -2408,10 +2400,6 @@ ath5k_init(struct ath5k_softc *sc) /* Set ack to be sent at low bit-rates */ ath5k_hw_set_ack_bitrate_high(ah, false); - - /* Set PHY calibration inteval */ - ah->ah_cal_intval = ath5k_calinterval; - ret = 0; done: mmiowb(); diff --git a/drivers/net/wireless/ath/ath9k/mac.c b/drivers/net/wireless/ath/ath9k/mac.c index 71b84d9..efc420c 100644 --- a/drivers/net/wireless/ath/ath9k/mac.c +++ b/drivers/net/wireless/ath/ath9k/mac.c @@ -186,7 +186,7 @@ bool ath9k_hw_stoptxdma(struct ath_hw *ah, u32 q) wait = wait_time; while (ath9k_hw_numtxpending(ah, q)) { if ((--wait) == 0) { - ath_print(common, ATH_DBG_QUEUE, + ath_print(common, ATH_DBG_FATAL, "Failed to stop TX DMA in 100 " "msec after killing last frame\n"); break; diff --git a/drivers/net/wireless/ath/ath9k/mac.h b/drivers/net/wireless/ath/ath9k/mac.h index 0c87771..e185479 100644 --- a/drivers/net/wireless/ath/ath9k/mac.h +++ b/drivers/net/wireless/ath/ath9k/mac.h @@ -77,6 +77,9 @@ #define ATH9K_TXERR_XTXOP 0x08 #define ATH9K_TXERR_TIMER_EXPIRED 0x10 #define ATH9K_TX_ACKED 0x20 +#define ATH9K_TXERR_MASK \ + (ATH9K_TXERR_XRETRY | ATH9K_TXERR_FILT | ATH9K_TXERR_FIFO | \ + ATH9K_TXERR_XTXOP | ATH9K_TXERR_TIMER_EXPIRED) #define ATH9K_TX_BA 0x01 #define ATH9K_TX_PWRMGMT 0x02 diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index c487434..996eb90 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -1973,6 +1973,9 @@ int ath_reset(struct ath_softc *sc, bool retry_tx) struct ieee80211_hw *hw = sc->hw; int r; + /* Stop ANI */ + del_timer_sync(&common->ani.timer); + ath9k_hw_set_interrupts(ah, 0); ath_drain_all_txq(sc, retry_tx); ath_stoprecv(sc); @@ -2014,6 +2017,9 @@ int ath_reset(struct ath_softc *sc, bool retry_tx) } } + /* Start ANI */ + ath_start_ani(common); + return r; } @@ -2508,6 +2514,9 @@ static void ath9k_stop(struct ieee80211_hw *hw) return; /* another wiphy still in use */ } + /* Ensure HW is awake when we try to shut it down. */ + ath9k_ps_wakeup(sc); + if (ah->btcoex_hw.enabled) { ath9k_hw_btcoex_disable(ah); if (ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_3WIRE) @@ -2528,6 +2537,9 @@ static void ath9k_stop(struct ieee80211_hw *hw) /* disable HAL and put h/w to sleep */ ath9k_hw_disable(ah); ath9k_hw_configpcipowersave(ah, 1, 1); + ath9k_ps_restore(sc); + + /* Finally, put the chip in FULL SLEEP mode */ ath9k_setpower(sc, ATH9K_PM_FULL_SLEEP); sc->sc_flags |= SC_OP_INVALID; @@ -2641,8 +2653,10 @@ static void ath9k_remove_interface(struct ieee80211_hw *hw, if ((sc->sc_ah->opmode == NL80211_IFTYPE_AP) || (sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC) || (sc->sc_ah->opmode == NL80211_IFTYPE_MESH_POINT)) { + ath9k_ps_wakeup(sc); ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq); ath_beacon_return(sc, avp); + ath9k_ps_restore(sc); } sc->sc_flags &= ~SC_OP_BEACONS; @@ -3091,15 +3105,21 @@ static int ath9k_ampdu_action(struct ieee80211_hw *hw, case IEEE80211_AMPDU_RX_STOP: break; case IEEE80211_AMPDU_TX_START: + ath9k_ps_wakeup(sc); ath_tx_aggr_start(sc, sta, tid, ssn); ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid); + ath9k_ps_restore(sc); break; case IEEE80211_AMPDU_TX_STOP: + ath9k_ps_wakeup(sc); ath_tx_aggr_stop(sc, sta, tid); ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid); + ath9k_ps_restore(sc); break; case IEEE80211_AMPDU_TX_OPERATIONAL: + ath9k_ps_wakeup(sc); ath_tx_aggr_resume(sc, sta, tid); + ath9k_ps_restore(sc); break; default: ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_FATAL, diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c index 5321f73..f7af5ea 100644 --- a/drivers/net/wireless/ath/ath9k/pci.c +++ b/drivers/net/wireless/ath/ath9k/pci.c @@ -96,7 +96,7 @@ static void ath_pci_bt_coex_prep(struct ath_common *common) pci_write_config_byte(pdev, ATH_PCIE_CAP_LINK_CTRL, aspm); } -const static struct ath_bus_ops ath_pci_bus_ops = { +static const struct ath_bus_ops ath_pci_bus_ops = { .read_cachesize = ath_pci_read_cachesize, .cleanup = ath_pci_cleanup, .eeprom_read = ath_pci_eeprom_read, diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 2a11cc5..fa12b90 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -1108,11 +1108,11 @@ void ath_drain_all_txq(struct ath_softc *sc, bool retry_tx) if (npend) { int r; - ath_print(common, ATH_DBG_XMIT, + ath_print(common, ATH_DBG_FATAL, "Unable to stop TxDMA. Reset HAL!\n"); spin_lock_bh(&sc->sc_resetlock); - r = ath9k_hw_reset(ah, sc->sc_ah->curchan, true); + r = ath9k_hw_reset(ah, sc->sc_ah->curchan, false); if (r) ath_print(common, ATH_DBG_FATAL, "Unable to reset hardware; reset status %d\n", @@ -1414,17 +1414,9 @@ static void assign_aggr_tid_seqno(struct sk_buff *skb, * For HT capable stations, we save tidno for later use. * We also override seqno set by upper layer with the one * in tx aggregation state. - * - * If fragmentation is on, the sequence number is - * not overridden, since it has been - * incremented by the fragmentation routine. - * - * FIXME: check if the fragmentation threshold exceeds - * IEEE80211 max. */ tid = ATH_AN_2_TID(an, bf->bf_tidno); - hdr->seq_ctrl = cpu_to_le16(tid->seq_next << - IEEE80211_SEQ_SEQ_SHIFT); + hdr->seq_ctrl = cpu_to_le16(tid->seq_next << IEEE80211_SEQ_SEQ_SHIFT); bf->bf_seqno = tid->seq_next; INCR(tid->seq_next, IEEE80211_SEQ_MAX); } @@ -1636,7 +1628,8 @@ static int ath_tx_setup_buffer(struct ieee80211_hw *hw, struct ath_buf *bf, bf->bf_keyix = ATH9K_TXKEYIX_INVALID; } - if (ieee80211_is_data_qos(fc) && (sc->sc_flags & SC_OP_TXAGGR)) + if (ieee80211_is_data_qos(fc) && bf_isht(bf) && + (sc->sc_flags & SC_OP_TXAGGR)) assign_aggr_tid_seqno(skb, bf); bf->bf_mpdu = skb; @@ -1780,7 +1773,8 @@ void ath_tx_cabq(struct ieee80211_hw *hw, struct sk_buff *skb) struct ath_wiphy *aphy = hw->priv; struct ath_softc *sc = aphy->sc; struct ath_common *common = ath9k_hw_common(sc->sc_ah); - int hdrlen, padsize; + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + int padpos, padsize; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); struct ath_tx_control txctl; @@ -1792,7 +1786,6 @@ void ath_tx_cabq(struct ieee80211_hw *hw, struct sk_buff *skb) * BSSes. */ if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) { - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT) sc->tx.seq_no += 0x10; hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG); @@ -1800,9 +1793,9 @@ void ath_tx_cabq(struct ieee80211_hw *hw, struct sk_buff *skb) } /* Add the padding after the header if this is not already done */ - hdrlen = ieee80211_get_hdrlen_from_skb(skb); - if (hdrlen & 3) { - padsize = hdrlen % 4; + padpos = ath9k_cmn_padpos(hdr->frame_control); + padsize = padpos & 3; + if (padsize && skb->len>padpos) { if (skb_headroom(skb) < padsize) { ath_print(common, ATH_DBG_XMIT, "TX CABQ padding failed\n"); @@ -1810,7 +1803,7 @@ void ath_tx_cabq(struct ieee80211_hw *hw, struct sk_buff *skb) return; } skb_push(skb, padsize); - memmove(skb->data, skb->data + padsize, hdrlen); + memmove(skb->data, skb->data + padsize, padpos); } txctl.txq = sc->beacon.cabq; @@ -1838,7 +1831,8 @@ static void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb, struct ieee80211_hw *hw = sc->hw; struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); struct ath_common *common = ath9k_hw_common(sc->sc_ah); - int hdrlen, padsize; + struct ieee80211_hdr * hdr = (struct ieee80211_hdr *)skb->data; + int padpos, padsize; ath_print(common, ATH_DBG_XMIT, "TX complete: skb: %p\n", skb); @@ -1853,14 +1847,14 @@ static void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb, tx_info->flags |= IEEE80211_TX_STAT_ACK; } - hdrlen = ieee80211_get_hdrlen_from_skb(skb); - padsize = hdrlen & 3; - if (padsize && hdrlen >= 24) { + padpos = ath9k_cmn_padpos(hdr->frame_control); + padsize = padpos & 3; + if (padsize && skb->len>padpos+padsize) { /* * Remove MAC header padding before giving the frame back to * mac80211. */ - memmove(skb->data + padsize, skb->data, hdrlen); + memmove(skb->data + padsize, skb->data, padpos); skb_pull(skb, padsize); } @@ -2078,7 +2072,7 @@ static void ath_tx_processq(struct ath_softc *sc, struct ath_txq *txq) &txq->axq_q, lastbf->list.prev); txq->axq_depth--; - txok = !(ds->ds_txstat.ts_status & ATH9K_TXERR_FILT); + txok = !(ds->ds_txstat.ts_status & ATH9K_TXERR_MASK); txq->axq_tx_inprogress = false; spin_unlock_bh(&txq->axq_lock); diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c index 027be27..88d1fd0 100644 --- a/drivers/net/wireless/b43/dma.c +++ b/drivers/net/wireless/b43/dma.c @@ -383,160 +383,44 @@ static inline } } -/* Check if a DMA region fits the device constraints. - * Returns true, if the region is OK for usage with this device. */ -static inline bool b43_dma_address_ok(struct b43_dmaring *ring, - dma_addr_t addr, size_t size) -{ - switch (ring->type) { - case B43_DMA_30BIT: - if ((u64)addr + size > (1ULL << 30)) - return 0; - break; - case B43_DMA_32BIT: - if ((u64)addr + size > (1ULL << 32)) - return 0; - break; - case B43_DMA_64BIT: - /* Currently we can't have addresses beyond - * 64bit in the kernel. */ - break; - } - return 1; -} - -#define is_4k_aligned(addr) (((u64)(addr) & 0x0FFFull) == 0) -#define is_8k_aligned(addr) (((u64)(addr) & 0x1FFFull) == 0) - -static void b43_unmap_and_free_ringmem(struct b43_dmaring *ring, void *base, - dma_addr_t dmaaddr, size_t size) -{ - ssb_dma_unmap_single(ring->dev->dev, dmaaddr, size, DMA_TO_DEVICE); - free_pages((unsigned long)base, get_order(size)); -} - -static void * __b43_get_and_map_ringmem(struct b43_dmaring *ring, - dma_addr_t *dmaaddr, size_t size, - gfp_t gfp_flags) -{ - void *base; - - base = (void *)__get_free_pages(gfp_flags, get_order(size)); - if (!base) - return NULL; - memset(base, 0, size); - *dmaaddr = ssb_dma_map_single(ring->dev->dev, base, size, - DMA_TO_DEVICE); - if (ssb_dma_mapping_error(ring->dev->dev, *dmaaddr)) { - free_pages((unsigned long)base, get_order(size)); - return NULL; - } - - return base; -} - -static void * b43_get_and_map_ringmem(struct b43_dmaring *ring, - dma_addr_t *dmaaddr, size_t size) -{ - void *base; - - base = __b43_get_and_map_ringmem(ring, dmaaddr, size, - GFP_KERNEL); - if (!base) { - b43err(ring->dev->wl, "Failed to allocate or map pages " - "for DMA ringmemory\n"); - return NULL; - } - if (!b43_dma_address_ok(ring, *dmaaddr, size)) { - /* The memory does not fit our device constraints. - * Retry with GFP_DMA set to get lower memory. */ - b43_unmap_and_free_ringmem(ring, base, *dmaaddr, size); - base = __b43_get_and_map_ringmem(ring, dmaaddr, size, - GFP_KERNEL | GFP_DMA); - if (!base) { - b43err(ring->dev->wl, "Failed to allocate or map pages " - "in the GFP_DMA region for DMA ringmemory\n"); - return NULL; - } - if (!b43_dma_address_ok(ring, *dmaaddr, size)) { - b43_unmap_and_free_ringmem(ring, base, *dmaaddr, size); - b43err(ring->dev->wl, "Failed to allocate DMA " - "ringmemory that fits device constraints\n"); - return NULL; - } - } - /* We expect the memory to be 4k aligned, at least. */ - if (B43_WARN_ON(!is_4k_aligned(*dmaaddr))) { - b43_unmap_and_free_ringmem(ring, base, *dmaaddr, size); - return NULL; - } - - return base; -} - static int alloc_ringmemory(struct b43_dmaring *ring) { - unsigned int required; - void *base; - dma_addr_t dmaaddr; - - /* There are several requirements to the descriptor ring memory: - * - The memory region needs to fit the address constraints for the - * device (same as for frame buffers). - * - For 30/32bit DMA devices, the descriptor ring must be 4k aligned. - * - For 64bit DMA devices, the descriptor ring must be 8k aligned. + gfp_t flags = GFP_KERNEL; + + /* The specs call for 4K buffers for 30- and 32-bit DMA with 4K + * alignment and 8K buffers for 64-bit DMA with 8K alignment. Testing + * has shown that 4K is sufficient for the latter as long as the buffer + * does not cross an 8K boundary. + * + * For unknown reasons - possibly a hardware error - the BCM4311 rev + * 02, which uses 64-bit DMA, needs the ring buffer in very low memory, + * which accounts for the GFP_DMA flag below. + * + * The flags here must match the flags in free_ringmemory below! */ - if (ring->type == B43_DMA_64BIT) - required = ring->nr_slots * sizeof(struct b43_dmadesc64); - else - required = ring->nr_slots * sizeof(struct b43_dmadesc32); - if (B43_WARN_ON(required > 0x1000)) + flags |= GFP_DMA; + ring->descbase = ssb_dma_alloc_consistent(ring->dev->dev, + B43_DMA_RINGMEMSIZE, + &(ring->dmabase), flags); + if (!ring->descbase) { + b43err(ring->dev->wl, "DMA ringmemory allocation failed\n"); return -ENOMEM; - - ring->alloc_descsize = 0x1000; - base = b43_get_and_map_ringmem(ring, &dmaaddr, ring->alloc_descsize); - if (!base) - return -ENOMEM; - ring->alloc_descbase = base; - ring->alloc_dmabase = dmaaddr; - - if ((ring->type != B43_DMA_64BIT) || is_8k_aligned(dmaaddr)) { - /* We're on <=32bit DMA, or we already got 8k aligned memory. - * That's all we need, so we're fine. */ - ring->descbase = base; - ring->dmabase = dmaaddr; - return 0; - } - b43_unmap_and_free_ringmem(ring, base, dmaaddr, ring->alloc_descsize); - - /* Ok, we failed at the 8k alignment requirement. - * Try to force-align the memory region now. */ - ring->alloc_descsize = 0x2000; - base = b43_get_and_map_ringmem(ring, &dmaaddr, ring->alloc_descsize); - if (!base) - return -ENOMEM; - ring->alloc_descbase = base; - ring->alloc_dmabase = dmaaddr; - - if (is_8k_aligned(dmaaddr)) { - /* We're already 8k aligned. That Ok, too. */ - ring->descbase = base; - ring->dmabase = dmaaddr; - return 0; } - /* Force-align it to 8k */ - ring->descbase = (void *)((u8 *)base + 0x1000); - ring->dmabase = dmaaddr + 0x1000; - B43_WARN_ON(!is_8k_aligned(ring->dmabase)); + memset(ring->descbase, 0, B43_DMA_RINGMEMSIZE); return 0; } static void free_ringmemory(struct b43_dmaring *ring) { - b43_unmap_and_free_ringmem(ring, ring->alloc_descbase, - ring->alloc_dmabase, ring->alloc_descsize); + gfp_t flags = GFP_KERNEL; + + if (ring->type == B43_DMA_64BIT) + flags |= GFP_DMA; + + ssb_dma_free_consistent(ring->dev->dev, B43_DMA_RINGMEMSIZE, + ring->descbase, ring->dmabase, flags); } /* Reset the RX DMA channel */ @@ -646,14 +530,29 @@ static bool b43_dma_mapping_error(struct b43_dmaring *ring, if (unlikely(ssb_dma_mapping_error(ring->dev->dev, addr))) return 1; - if (!b43_dma_address_ok(ring, addr, buffersize)) { - /* We can't support this address. Unmap it again. */ - unmap_descbuffer(ring, addr, buffersize, dma_to_device); - return 1; + switch (ring->type) { + case B43_DMA_30BIT: + if ((u64)addr + buffersize > (1ULL << 30)) + goto address_error; + break; + case B43_DMA_32BIT: + if ((u64)addr + buffersize > (1ULL << 32)) + goto address_error; + break; + case B43_DMA_64BIT: + /* Currently we can't have addresses beyond + * 64bit in the kernel. */ + break; } /* The address is OK. */ return 0; + +address_error: + /* We can't support this address. Unmap it again. */ + unmap_descbuffer(ring, addr, buffersize, dma_to_device); + + return 1; } static bool b43_rx_buffer_is_poisoned(struct b43_dmaring *ring, struct sk_buff *skb) @@ -715,9 +614,6 @@ static int setup_rx_descbuffer(struct b43_dmaring *ring, meta->dmaaddr = dmaaddr; ring->ops->fill_descriptor(ring, desc, dmaaddr, ring->rx_buffersize, 0, 0, 0); - ssb_dma_sync_single_for_device(ring->dev->dev, - ring->alloc_dmabase, - ring->alloc_descsize, DMA_TO_DEVICE); return 0; } @@ -1354,9 +1250,6 @@ static int dma_tx_fragment(struct b43_dmaring *ring, } /* Now transfer the whole frame. */ wmb(); - ssb_dma_sync_single_for_device(ring->dev->dev, - ring->alloc_dmabase, - ring->alloc_descsize, DMA_TO_DEVICE); ops->poke_tx(ring, next_slot(ring, slot)); return 0; diff --git a/drivers/net/wireless/b43/dma.h b/drivers/net/wireless/b43/dma.h index e607b39..f7ab37c 100644 --- a/drivers/net/wireless/b43/dma.h +++ b/drivers/net/wireless/b43/dma.h @@ -157,6 +157,7 @@ struct b43_dmadesc_generic { } __attribute__ ((__packed__)); /* Misc DMA constants */ +#define B43_DMA_RINGMEMSIZE PAGE_SIZE #define B43_DMA0_RX_FRAMEOFFSET 30 /* DMA engine tuning knobs */ @@ -246,12 +247,6 @@ struct b43_dmaring { /* The QOS priority assigned to this ring. Only used for TX rings. * This is the mac80211 "queue" value. */ u8 queue_prio; - /* Pointers and size of the originally allocated and mapped memory - * region for the descriptor ring. */ - void *alloc_descbase; - dma_addr_t alloc_dmabase; - unsigned int alloc_descsize; - /* Pointer to our wireless device. */ struct b43_wldev *dev; #ifdef CONFIG_B43_DEBUG /* Maximum number of used slots. */ diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c index 7da1dab..234891d 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945.c @@ -681,19 +681,13 @@ static void iwl3945_rx_reply_rx(struct iwl_priv *priv, snr = rx_stats_sig_avg / rx_stats_noise_diff; rx_status.noise = rx_status.signal - iwl3945_calc_db_from_ratio(snr); - rx_status.qual = iwl3945_calc_sig_qual(rx_status.signal, - rx_status.noise); - - /* If noise info not available, calculate signal quality indicator (%) - * using just the dBm signal level. */ } else { rx_status.noise = priv->last_rx_noise; - rx_status.qual = iwl3945_calc_sig_qual(rx_status.signal, 0); } - IWL_DEBUG_STATS(priv, "Rssi %d noise %d qual %d sig_avg %d noise_diff %d\n", - rx_status.signal, rx_status.noise, rx_status.qual, + IWL_DEBUG_STATS(priv, "Rssi %d noise %d sig_avg %d noise_diff %d\n", + rx_status.signal, rx_status.noise, rx_stats_sig_avg, rx_stats_noise_diff); header = (struct ieee80211_hdr *)IWL_RX_DATA(pkt); @@ -1835,8 +1829,7 @@ static int iwl3945_send_rxon_assoc(struct iwl_priv *priv) rc = -EIO; } - priv->alloc_rxb_page--; - free_pages(cmd.reply_page, priv->hw_params.rx_page_order); + iwl_free_pages(priv, cmd.reply_page); return rc; } @@ -2836,6 +2829,7 @@ static struct iwl_cfg iwl3945_bg_cfg = { .use_isr_legacy = true, .ht_greenfield_support = false, .led_compensation = 64, + .broken_powersave = true, }; static struct iwl_cfg iwl3945_abg_cfg = { @@ -2852,6 +2846,7 @@ static struct iwl_cfg iwl3945_abg_cfg = { .use_isr_legacy = true, .ht_greenfield_support = false, .led_compensation = 64, + .broken_powersave = true, }; struct pci_device_id iwl3945_hw_card_ids[] = { diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.h b/drivers/net/wireless/iwlwifi/iwl-3945.h index ecc23ec..531fa12 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945.h +++ b/drivers/net/wireless/iwlwifi/iwl-3945.h @@ -222,7 +222,6 @@ struct iwl3945_ibss_seq { * *****************************************************************************/ extern int iwl3945_calc_db_from_ratio(int sig_ratio); -extern int iwl3945_calc_sig_qual(int rssi_dbm, int noise_dbm); extern void iwl3945_rx_replenish(void *data); extern void iwl3945_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq); extern unsigned int iwl3945_fill_beacon_frame(struct iwl_priv *priv, diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index 386513b..484c5fd 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -1204,7 +1204,7 @@ static int iwl4965_fill_txpower_tbl(struct iwl_priv *priv, u8 band, u16 channel, iwl4965_interpolate_chan(priv, channel, &ch_eeprom_info); /* calculate tx gain adjustment based on power supply voltage */ - voltage = priv->calib_info->voltage; + voltage = le16_to_cpu(priv->calib_info->voltage); init_voltage = (s32)le32_to_cpu(priv->card_alive_init.voltage); voltage_compensation = iwl4965_get_voltage_compensation(voltage, init_voltage); diff --git a/drivers/net/wireless/iwlwifi/iwl-5000-hw.h b/drivers/net/wireless/iwlwifi/iwl-5000-hw.h index 4ef6804..bc056e9 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000-hw.h +++ b/drivers/net/wireless/iwlwifi/iwl-5000-hw.h @@ -92,11 +92,15 @@ static inline s32 iwl_temp_calib_to_offset(struct iwl_priv *priv) { - u16 *temp_calib = (u16 *)iwl_eeprom_query_addr(priv, - EEPROM_5000_TEMPERATURE); - /* offset = temperature - voltage / coef */ - s32 offset = (s32)(temp_calib[0] - temp_calib[1] / IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF); - return offset; + u16 temperature, voltage; + __le16 *temp_calib = + (__le16 *)iwl_eeprom_query_addr(priv, EEPROM_5000_TEMPERATURE); + + temperature = le16_to_cpu(temp_calib[0]); + voltage = le16_to_cpu(temp_calib[1]); + + /* offset = temp - volt / coeff */ + return (s32)(temperature - voltage / IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF); } /* Fixed (non-configurable) rx data from phy */ diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index e2f8615..33a5866 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -333,14 +333,15 @@ static void iwl5000_set_ct_threshold(struct iwl_priv *priv) static int iwl5000_set_Xtal_calib(struct iwl_priv *priv) { struct iwl_calib_xtal_freq_cmd cmd; - u16 *xtal_calib = (u16 *)iwl_eeprom_query_addr(priv, EEPROM_5000_XTAL); + __le16 *xtal_calib = + (__le16 *)iwl_eeprom_query_addr(priv, EEPROM_5000_XTAL); cmd.hdr.op_code = IWL_PHY_CALIBRATE_CRYSTAL_FRQ_CMD; cmd.hdr.first_group = 0; cmd.hdr.groups_num = 1; cmd.hdr.data_valid = 1; - cmd.cap_pin1 = (u8)xtal_calib[0]; - cmd.cap_pin2 = (u8)xtal_calib[1]; + cmd.cap_pin1 = le16_to_cpu(xtal_calib[0]); + cmd.cap_pin2 = le16_to_cpu(xtal_calib[1]); return iwl_calib_set(&priv->calib_results[IWL_CALIB_XTAL], (u8 *)&cmd, sizeof(cmd)); } diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c index fe511cb..b93e491 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c @@ -150,7 +150,7 @@ static s32 expected_tpt_mimo3_40MHz[4][IWL_RATE_COUNT] = { }; /* mbps, mcs */ -const static struct iwl_rate_mcs_info iwl_rate_mcs[IWL_RATE_COUNT] = { +static const struct iwl_rate_mcs_info iwl_rate_mcs[IWL_RATE_COUNT] = { { "1", "BPSK DSSS"}, { "2", "QPSK DSSS"}, {"5.5", "BPSK CCK"}, diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index b8377ef..1c9866d 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -1842,7 +1842,7 @@ void iwl_dump_nic_event_log(struct iwl_priv *priv, bool full_log) } #ifdef CONFIG_IWLWIFI_DEBUG - if (!(iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS)) + if (!(iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) && !full_log) size = (size > DEFAULT_DUMP_EVENT_LOG_ENTRIES) ? DEFAULT_DUMP_EVENT_LOG_ENTRIES : size; #else @@ -3173,7 +3173,6 @@ static int iwl_init_drv(struct iwl_priv *priv) priv->ibss_beacon = NULL; - spin_lock_init(&priv->lock); spin_lock_init(&priv->sta_lock); spin_lock_init(&priv->hcmd_lock); @@ -3361,10 +3360,11 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) (unsigned long long) pci_resource_len(pdev, 0)); IWL_DEBUG_INFO(priv, "pci_resource_base = %p\n", priv->hw_base); - /* this spin lock will be used in apm_ops.init and EEPROM access + /* these spin locks will be used in apm_ops.init and EEPROM access * we should init now */ spin_lock_init(&priv->reg_lock); + spin_lock_init(&priv->lock); iwl_hw_detect(priv); IWL_INFO(priv, "Detected Intel Wireless WiFi Link %s REV=0x%X\n", priv->cfg->name, priv->hw_rev); diff --git a/drivers/net/wireless/iwlwifi/iwl-csr.h b/drivers/net/wireless/iwlwifi/iwl-csr.h index a7bfae0..1ec8cb4 100644 --- a/drivers/net/wireless/iwlwifi/iwl-csr.h +++ b/drivers/net/wireless/iwlwifi/iwl-csr.h @@ -77,8 +77,7 @@ * The MAC (uCode processor, etc.) does not need to be powered up for accessing * the CSR registers. * - * NOTE: Newer devices using one-time-programmable (OTP) memory - * require device to be awake in order to read this memory + * NOTE: Device does need to be awake in order to read this memory * via CSR_EEPROM and CSR_OTP registers */ #define CSR_BASE (0x000) @@ -111,9 +110,8 @@ /* * EEPROM and OTP (one-time-programmable) memory reads * - * NOTE: For (newer) devices using OTP, device must be awake, initialized via - * apm_ops.init() in order to read. Older devices (3945/4965/5000) - * use EEPROM and do not require this. + * NOTE: Device must be awake, initialized via apm_ops.init(), + * in order to read. */ #define CSR_EEPROM_REG (CSR_BASE+0x02c) #define CSR_EEPROM_GP (CSR_BASE+0x030) diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h index 2673e9a..165d1f6 100644 --- a/drivers/net/wireless/iwlwifi/iwl-dev.h +++ b/drivers/net/wireless/iwlwifi/iwl-dev.h @@ -1168,7 +1168,7 @@ struct iwl_priv { u32 last_beacon_time; u64 last_tsf; - /* eeprom */ + /* eeprom -- this is in the card's little endian byte order */ u8 *eeprom; int nvm_device_type; struct iwl_eeprom_calib_info *calib_info; @@ -1353,4 +1353,15 @@ static inline int is_channel_ibss(const struct iwl_channel_info *ch) return ((ch->flags & EEPROM_CHANNEL_IBSS)) ? 1 : 0; } +static inline void __iwl_free_pages(struct iwl_priv *priv, struct page *page) +{ + __free_pages(page, priv->hw_params.rx_page_order); + priv->alloc_rxb_page--; +} + +static inline void iwl_free_pages(struct iwl_priv *priv, unsigned long page) +{ + free_pages(page, priv->hw_params.rx_page_order); + priv->alloc_rxb_page--; +} #endif /* __iwl_dev_h__ */ diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.c b/drivers/net/wireless/iwlwifi/iwl-eeprom.c index 3946e5c..4a30969 100644 --- a/drivers/net/wireless/iwlwifi/iwl-eeprom.c +++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.c @@ -370,7 +370,7 @@ static int iwl_init_otp_access(struct iwl_priv *priv) return ret; } -static int iwl_read_otp_word(struct iwl_priv *priv, u16 addr, u16 *eeprom_data) +static int iwl_read_otp_word(struct iwl_priv *priv, u16 addr, __le16 *eeprom_data) { int ret = 0; u32 r; @@ -404,7 +404,7 @@ static int iwl_read_otp_word(struct iwl_priv *priv, u16 addr, u16 *eeprom_data) CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK); IWL_ERR(priv, "Correctable OTP ECC error, continue read\n"); } - *eeprom_data = le16_to_cpu((__force __le16)(r >> 16)); + *eeprom_data = cpu_to_le16(r >> 16); return 0; } @@ -413,7 +413,8 @@ static int iwl_read_otp_word(struct iwl_priv *priv, u16 addr, u16 *eeprom_data) */ static bool iwl_is_otp_empty(struct iwl_priv *priv) { - u16 next_link_addr = 0, link_value; + u16 next_link_addr = 0; + __le16 link_value; bool is_empty = false; /* locate the beginning of OTP link list */ @@ -443,7 +444,8 @@ static bool iwl_is_otp_empty(struct iwl_priv *priv) static int iwl_find_otp_image(struct iwl_priv *priv, u16 *validblockaddr) { - u16 next_link_addr = 0, link_value = 0, valid_addr; + u16 next_link_addr = 0, valid_addr; + __le16 link_value = 0; int usedblocks = 0; /* set addressing mode to absolute to traverse the link list */ @@ -463,7 +465,7 @@ static int iwl_find_otp_image(struct iwl_priv *priv, * check for more block on the link list */ valid_addr = next_link_addr; - next_link_addr = link_value * sizeof(u16); + next_link_addr = le16_to_cpu(link_value) * sizeof(u16); IWL_DEBUG_INFO(priv, "OTP blocks %d addr 0x%x\n", usedblocks, next_link_addr); if (iwl_read_otp_word(priv, next_link_addr, &link_value)) @@ -497,7 +499,7 @@ static int iwl_find_otp_image(struct iwl_priv *priv, */ int iwl_eeprom_init(struct iwl_priv *priv) { - u16 *e; + __le16 *e; u32 gp = iwl_read32(priv, CSR_EEPROM_GP); int sz; int ret; @@ -516,12 +518,9 @@ int iwl_eeprom_init(struct iwl_priv *priv) ret = -ENOMEM; goto alloc_err; } - e = (u16 *)priv->eeprom; + e = (__le16 *)priv->eeprom; - if (priv->nvm_device_type == NVM_DEVICE_TYPE_OTP) { - /* OTP reads require powered-up chip */ - priv->cfg->ops->lib->apm_ops.init(priv); - } + priv->cfg->ops->lib->apm_ops.init(priv); ret = priv->cfg->ops->lib->eeprom_ops.verify_signature(priv); if (ret < 0) { @@ -562,7 +561,7 @@ int iwl_eeprom_init(struct iwl_priv *priv) } for (addr = validblockaddr; addr < validblockaddr + sz; addr += sizeof(u16)) { - u16 eeprom_data; + __le16 eeprom_data; ret = iwl_read_otp_word(priv, addr, &eeprom_data); if (ret) @@ -570,13 +569,6 @@ int iwl_eeprom_init(struct iwl_priv *priv) e[cache_addr / 2] = eeprom_data; cache_addr += sizeof(u16); } - - /* - * Now that OTP reads are complete, reset chip to save - * power until we load uCode during "up". - */ - priv->cfg->ops->lib->apm_ops.stop(priv); - } else { /* eeprom is an array of 16bit values */ for (addr = 0; addr < sz; addr += sizeof(u16)) { @@ -594,7 +586,7 @@ int iwl_eeprom_init(struct iwl_priv *priv) goto done; } r = _iwl_read_direct32(priv, CSR_EEPROM_REG); - e[addr / 2] = le16_to_cpu((__force __le16)(r >> 16)); + e[addr / 2] = cpu_to_le16(r >> 16); } } ret = 0; @@ -603,6 +595,8 @@ done: err: if (ret) iwl_eeprom_free(priv); + /* Reset chip to save power until we load uCode during "up". */ + priv->cfg->ops->lib->apm_ops.stop(priv); alloc_err: return ret; } @@ -755,7 +749,8 @@ static int iwl_mod_ht40_chan_info(struct iwl_priv *priv, ch_info->ht40_eeprom = *eeprom_ch; ch_info->ht40_max_power_avg = eeprom_ch->max_power_avg; ch_info->ht40_flags = eeprom_ch->flags; - ch_info->ht40_extension_channel &= ~clear_ht40_extension_channel; + if (eeprom_ch->flags & EEPROM_CHANNEL_VALID) + ch_info->ht40_extension_channel &= ~clear_ht40_extension_channel; return 0; } diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.h b/drivers/net/wireless/iwlwifi/iwl-eeprom.h index 5cd2b66..0cd9c02 100644 --- a/drivers/net/wireless/iwlwifi/iwl-eeprom.h +++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.h @@ -137,7 +137,7 @@ struct iwl_eeprom_channel { * */ struct iwl_eeprom_enhanced_txpwr { - u16 common; + __le16 common; s8 chain_a_max; s8 chain_b_max; s8 chain_c_max; @@ -360,7 +360,7 @@ struct iwl_eeprom_calib_subband_info { struct iwl_eeprom_calib_info { u8 saturation_power24; /* half-dBm (e.g. "34" = 17 dBm) */ u8 saturation_power52; /* half-dBm */ - s16 voltage; /* signed */ + __le16 voltage; /* signed */ struct iwl_eeprom_calib_subband_info band_info[EEPROM_TX_POWER_BANDS]; } __attribute__ ((packed)); diff --git a/drivers/net/wireless/iwlwifi/iwl-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-hcmd.c index a231659..30e9ea6 100644 --- a/drivers/net/wireless/iwlwifi/iwl-hcmd.c +++ b/drivers/net/wireless/iwlwifi/iwl-hcmd.c @@ -234,7 +234,7 @@ cancel: } fail: if (cmd->reply_page) { - free_pages(cmd->reply_page, priv->hw_params.rx_page_order); + iwl_free_pages(priv, cmd->reply_page); cmd->reply_page = 0; } out: diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c index 6090bc1..6f36b6e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-rx.c +++ b/drivers/net/wireless/iwlwifi/iwl-rx.c @@ -345,10 +345,8 @@ void iwl_rx_queue_free(struct iwl_priv *priv, struct iwl_rx_queue *rxq) pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma, PAGE_SIZE << priv->hw_params.rx_page_order, PCI_DMA_FROMDEVICE); - __free_pages(rxq->pool[i].page, - priv->hw_params.rx_page_order); + __iwl_free_pages(priv, rxq->pool[i].page); rxq->pool[i].page = NULL; - priv->alloc_rxb_page--; } } @@ -416,9 +414,7 @@ void iwl_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq) pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma, PAGE_SIZE << priv->hw_params.rx_page_order, PCI_DMA_FROMDEVICE); - priv->alloc_rxb_page--; - __free_pages(rxq->pool[i].page, - priv->hw_params.rx_page_order); + __iwl_free_pages(priv, rxq->pool[i].page); rxq->pool[i].page = NULL; } list_add_tail(&rxq->pool[i].list, &rxq->rx_used); @@ -654,47 +650,6 @@ void iwl_reply_statistics(struct iwl_priv *priv, } EXPORT_SYMBOL(iwl_reply_statistics); -#define PERFECT_RSSI (-20) /* dBm */ -#define WORST_RSSI (-95) /* dBm */ -#define RSSI_RANGE (PERFECT_RSSI - WORST_RSSI) - -/* Calculate an indication of rx signal quality (a percentage, not dBm!). - * See http://www.ces.clemson.edu/linux/signal_quality.shtml for info - * about formulas used below. */ -static int iwl_calc_sig_qual(int rssi_dbm, int noise_dbm) -{ - int sig_qual; - int degradation = PERFECT_RSSI - rssi_dbm; - - /* If we get a noise measurement, use signal-to-noise ratio (SNR) - * as indicator; formula is (signal dbm - noise dbm). - * SNR at or above 40 is a great signal (100%). - * Below that, scale to fit SNR of 0 - 40 dB within 0 - 100% indicator. - * Weakest usable signal is usually 10 - 15 dB SNR. */ - if (noise_dbm) { - if (rssi_dbm - noise_dbm >= 40) - return 100; - else if (rssi_dbm < noise_dbm) - return 0; - sig_qual = ((rssi_dbm - noise_dbm) * 5) / 2; - - /* Else use just the signal level. - * This formula is a least squares fit of data points collected and - * compared with a reference system that had a percentage (%) display - * for signal quality. */ - } else - sig_qual = (100 * (RSSI_RANGE * RSSI_RANGE) - degradation * - (15 * RSSI_RANGE + 62 * degradation)) / - (RSSI_RANGE * RSSI_RANGE); - - if (sig_qual > 100) - sig_qual = 100; - else if (sig_qual < 1) - sig_qual = 0; - - return sig_qual; -} - /* Calc max signal level (dBm) among 3 possible receivers */ static inline int iwl_calc_rssi(struct iwl_priv *priv, struct iwl_rx_phy_res *rx_resp) @@ -1105,11 +1060,8 @@ void iwl_rx_reply_rx(struct iwl_priv *priv, if (iwl_is_associated(priv) && !test_bit(STATUS_SCANNING, &priv->status)) { rx_status.noise = priv->last_rx_noise; - rx_status.qual = iwl_calc_sig_qual(rx_status.signal, - rx_status.noise); } else { rx_status.noise = IWL_NOISE_MEAS_NOT_AVAILABLE; - rx_status.qual = iwl_calc_sig_qual(rx_status.signal, 0); } /* Reset beacon noise level if not associated. */ @@ -1122,8 +1074,8 @@ void iwl_rx_reply_rx(struct iwl_priv *priv, iwl_dbg_report_frame(priv, phy_res, len, header, 1); #endif iwl_dbg_log_rx_data_frame(priv, len, header); - IWL_DEBUG_STATS_LIMIT(priv, "Rssi %d, noise %d, qual %d, TSF %llu\n", - rx_status.signal, rx_status.noise, rx_status.qual, + IWL_DEBUG_STATS_LIMIT(priv, "Rssi %d, noise %d, TSF %llu\n", + rx_status.signal, rx_status.noise, (unsigned long long)rx_status.mactime); /* diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c index a2b2b83..fa1c89b 100644 --- a/drivers/net/wireless/iwlwifi/iwl-scan.c +++ b/drivers/net/wireless/iwlwifi/iwl-scan.c @@ -144,8 +144,7 @@ static int iwl_send_scan_abort(struct iwl_priv *priv) clear_bit(STATUS_SCAN_HW, &priv->status); } - priv->alloc_rxb_page--; - free_pages(cmd.reply_page, priv->hw_params.rx_page_order); + iwl_free_pages(priv, cmd.reply_page); return ret; } diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c index cd6a690..cde09a8 100644 --- a/drivers/net/wireless/iwlwifi/iwl-sta.c +++ b/drivers/net/wireless/iwlwifi/iwl-sta.c @@ -164,9 +164,7 @@ int iwl_send_add_sta(struct iwl_priv *priv, break; } } - - priv->alloc_rxb_page--; - free_pages(cmd.reply_page, priv->hw_params.rx_page_order); + iwl_free_pages(priv, cmd.reply_page); return ret; } @@ -391,9 +389,7 @@ static int iwl_send_remove_station(struct iwl_priv *priv, const u8 *addr, break; } } - - priv->alloc_rxb_page--; - free_pages(cmd.reply_page, priv->hw_params.rx_page_order); + iwl_free_pages(priv, cmd.reply_page); return ret; } diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c index 00da5e1..87ce2bd 100644 --- a/drivers/net/wireless/iwlwifi/iwl-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-tx.c @@ -407,13 +407,14 @@ void iwl_hw_txq_ctx_free(struct iwl_priv *priv) int txq_id; /* Tx queues */ - if (priv->txq) + if (priv->txq) { for (txq_id = 0; txq_id < priv->hw_params.max_txq_num; txq_id++) if (txq_id == IWL_CMD_QUEUE_NUM) iwl_cmd_queue_free(priv); else iwl_tx_queue_free(priv, txq_id); + } iwl_free_dma_ptr(priv, &priv->kw); iwl_free_dma_ptr(priv, &priv->scd_bc_tbls); diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 2a28a1f..f8e4e4b 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -548,6 +548,9 @@ static int iwl3945_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) txq = &priv->txq[txq_id]; q = &txq->q; + if ((iwl_queue_space(q) < q->high_mark)) + goto drop; + spin_lock_irqsave(&priv->lock, flags); idx = get_cmd_index(q, q->write_ptr, 0); @@ -812,7 +815,7 @@ static int iwl3945_get_measurement(struct iwl_priv *priv, break; } - free_pages(cmd.reply_page, priv->hw_params.rx_page_order); + iwl_free_pages(priv, cmd.reply_page); return rc; } @@ -1198,9 +1201,7 @@ void iwl3945_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq) pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma, PAGE_SIZE << priv->hw_params.rx_page_order, PCI_DMA_FROMDEVICE); - priv->alloc_rxb_page--; - __free_pages(rxq->pool[i].page, - priv->hw_params.rx_page_order); + __iwl_free_pages(priv, rxq->pool[i].page); rxq->pool[i].page = NULL; } list_add_tail(&rxq->pool[i].list, &rxq->rx_used); @@ -1247,10 +1248,8 @@ static void iwl3945_rx_queue_free(struct iwl_priv *priv, struct iwl_rx_queue *rx pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma, PAGE_SIZE << priv->hw_params.rx_page_order, PCI_DMA_FROMDEVICE); - __free_pages(rxq->pool[i].page, - priv->hw_params.rx_page_order); + __iwl_free_pages(priv, rxq->pool[i].page); rxq->pool[i].page = NULL; - priv->alloc_rxb_page--; } } @@ -1300,47 +1299,6 @@ int iwl3945_calc_db_from_ratio(int sig_ratio) return (int)ratio2dB[sig_ratio]; } -#define PERFECT_RSSI (-20) /* dBm */ -#define WORST_RSSI (-95) /* dBm */ -#define RSSI_RANGE (PERFECT_RSSI - WORST_RSSI) - -/* Calculate an indication of rx signal quality (a percentage, not dBm!). - * See http://www.ces.clemson.edu/linux/signal_quality.shtml for info - * about formulas used below. */ -int iwl3945_calc_sig_qual(int rssi_dbm, int noise_dbm) -{ - int sig_qual; - int degradation = PERFECT_RSSI - rssi_dbm; - - /* If we get a noise measurement, use signal-to-noise ratio (SNR) - * as indicator; formula is (signal dbm - noise dbm). - * SNR at or above 40 is a great signal (100%). - * Below that, scale to fit SNR of 0 - 40 dB within 0 - 100% indicator. - * Weakest usable signal is usually 10 - 15 dB SNR. */ - if (noise_dbm) { - if (rssi_dbm - noise_dbm >= 40) - return 100; - else if (rssi_dbm < noise_dbm) - return 0; - sig_qual = ((rssi_dbm - noise_dbm) * 5) / 2; - - /* Else use just the signal level. - * This formula is a least squares fit of data points collected and - * compared with a reference system that had a percentage (%) display - * for signal quality. */ - } else - sig_qual = (100 * (RSSI_RANGE * RSSI_RANGE) - degradation * - (15 * RSSI_RANGE + 62 * degradation)) / - (RSSI_RANGE * RSSI_RANGE); - - if (sig_qual > 100) - sig_qual = 100; - else if (sig_qual < 1) - sig_qual = 0; - - return sig_qual; -} - /** * iwl3945_rx_handle - Main entry function for receiving responses from uCode * @@ -1688,7 +1646,7 @@ void iwl3945_dump_nic_event_log(struct iwl_priv *priv, bool full_log) } #ifdef CONFIG_IWLWIFI_DEBUG - if (!(iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS)) + if (!(iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) && !full_log) size = (size > DEFAULT_IWL3945_DUMP_EVENT_LOG_ENTRIES) ? DEFAULT_IWL3945_DUMP_EVENT_LOG_ENTRIES : size; #else @@ -3867,7 +3825,6 @@ static int iwl3945_init_drv(struct iwl_priv *priv) priv->retry_rate = 1; priv->ibss_beacon = NULL; - spin_lock_init(&priv->lock); spin_lock_init(&priv->sta_lock); spin_lock_init(&priv->hcmd_lock); @@ -3936,9 +3893,11 @@ static int iwl3945_setup_mac(struct iwl_priv *priv) /* Tell mac80211 our characteristics */ hw->flags = IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_NOISE_DBM | - IEEE80211_HW_SPECTRUM_MGMT | - IEEE80211_HW_SUPPORTS_PS | - IEEE80211_HW_SUPPORTS_DYNAMIC_PS; + IEEE80211_HW_SPECTRUM_MGMT; + + if (!priv->cfg->broken_powersave) + hw->flags |= IEEE80211_HW_SUPPORTS_PS | + IEEE80211_HW_SUPPORTS_DYNAMIC_PS; hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | @@ -4057,10 +4016,11 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e * PCI Tx retries from interfering with C3 CPU state */ pci_write_config_byte(pdev, 0x41, 0x00); - /* this spin lock will be used in apm_ops.init and EEPROM access + /* these spin locks will be used in apm_ops.init and EEPROM access * we should init now */ spin_lock_init(&priv->reg_lock); + spin_lock_init(&priv->lock); /*********************** * 4. Read EEPROM diff --git a/drivers/net/wireless/iwmc3200wifi/iwm.h b/drivers/net/wireless/iwmc3200wifi/iwm.h index 5a26bb0..8428111 100644 --- a/drivers/net/wireless/iwmc3200wifi/iwm.h +++ b/drivers/net/wireless/iwmc3200wifi/iwm.h @@ -268,7 +268,7 @@ struct iwm_priv { struct sk_buff_head rx_list; struct list_head rx_tickets; - struct list_head rx_packets[IWM_RX_ID_HASH]; + struct list_head rx_packets[IWM_RX_ID_HASH + 1]; struct workqueue_struct *rx_wq; struct work_struct rx_worker; @@ -349,7 +349,7 @@ int iwm_up(struct iwm_priv *iwm); int iwm_down(struct iwm_priv *iwm); /* TX API */ -u16 iwm_tid_to_queue(u16 tid); +int iwm_tid_to_queue(u16 tid); void iwm_tx_credit_inc(struct iwm_priv *iwm, int id, int total_freed_pages); void iwm_tx_worker(struct work_struct *work); int iwm_xmit_frame(struct sk_buff *skb, struct net_device *netdev); diff --git a/drivers/net/wireless/iwmc3200wifi/netdev.c b/drivers/net/wireless/iwmc3200wifi/netdev.c index e4f0f87..c4c0d23 100644 --- a/drivers/net/wireless/iwmc3200wifi/netdev.c +++ b/drivers/net/wireless/iwmc3200wifi/netdev.c @@ -76,7 +76,7 @@ static int iwm_stop(struct net_device *ndev) */ static const u16 iwm_1d_to_queue[8] = { 1, 0, 0, 1, 2, 2, 3, 3 }; -u16 iwm_tid_to_queue(u16 tid) +int iwm_tid_to_queue(u16 tid) { if (tid > IWM_UMAC_TID_NR - 2) return -EINVAL; diff --git a/drivers/net/wireless/iwmc3200wifi/rx.c b/drivers/net/wireless/iwmc3200wifi/rx.c index 1c57c1f..6d6ed74 100644 --- a/drivers/net/wireless/iwmc3200wifi/rx.c +++ b/drivers/net/wireless/iwmc3200wifi/rx.c @@ -1126,7 +1126,7 @@ static int iwm_ntf_stop_resume_tx(struct iwm_priv *iwm, u8 *buf, if (!stop) { struct iwm_tx_queue *txq; - u16 queue = iwm_tid_to_queue(bit); + int queue = iwm_tid_to_queue(bit); if (queue < 0) continue; diff --git a/drivers/net/wireless/libertas/mesh.c b/drivers/net/wireless/libertas/mesh.c index 2f91c9b..92b7a35 100644 --- a/drivers/net/wireless/libertas/mesh.c +++ b/drivers/net/wireless/libertas/mesh.c @@ -2,6 +2,7 @@ #include <linux/delay.h> #include <linux/etherdevice.h> #include <linux/netdevice.h> +#include <linux/if_ether.h> #include <linux/if_arp.h> #include <linux/kthread.h> #include <linux/kfifo.h> @@ -351,8 +352,7 @@ int lbs_add_mesh(struct lbs_private *priv) mesh_dev->netdev_ops = &mesh_netdev_ops; mesh_dev->ethtool_ops = &lbs_ethtool_ops; - memcpy(mesh_dev->dev_addr, priv->dev->dev_addr, - sizeof(priv->dev->dev_addr)); + memcpy(mesh_dev->dev_addr, priv->dev->dev_addr, ETH_ALEN); SET_NETDEV_DEV(priv->mesh_dev, priv->dev->dev.parent); diff --git a/drivers/net/wireless/libertas/scan.c b/drivers/net/wireless/libertas/scan.c index c6a6c04..b0b1c78 100644 --- a/drivers/net/wireless/libertas/scan.c +++ b/drivers/net/wireless/libertas/scan.c @@ -567,11 +567,8 @@ int lbs_scan_networks(struct lbs_private *priv, int full_scan) chan_count = lbs_scan_create_channel_list(priv, chan_list); netif_stop_queue(priv->dev); - netif_carrier_off(priv->dev); - if (priv->mesh_dev) { + if (priv->mesh_dev) netif_stop_queue(priv->mesh_dev); - netif_carrier_off(priv->mesh_dev); - } /* Prepare to continue an interrupted scan */ lbs_deb_scan("chan_count %d, scan_channel %d\n", @@ -635,16 +632,13 @@ out2: priv->scan_channel = 0; out: - if (priv->connect_status == LBS_CONNECTED) { - netif_carrier_on(priv->dev); - if (!priv->tx_pending_len) - netif_wake_queue(priv->dev); - } - if (priv->mesh_dev && (priv->mesh_connect_status == LBS_CONNECTED)) { - netif_carrier_on(priv->mesh_dev); - if (!priv->tx_pending_len) - netif_wake_queue(priv->mesh_dev); - } + if (priv->connect_status == LBS_CONNECTED && !priv->tx_pending_len) + netif_wake_queue(priv->dev); + + if (priv->mesh_dev && (priv->mesh_connect_status == LBS_CONNECTED) && + !priv->tx_pending_len) + netif_wake_queue(priv->mesh_dev); + kfree(chan_list); lbs_deb_leave_args(LBS_DEB_SCAN, "ret %d", ret); diff --git a/drivers/net/wireless/libertas/wext.c b/drivers/net/wireless/libertas/wext.c index a8eb9e1..4b1aab5 100644 --- a/drivers/net/wireless/libertas/wext.c +++ b/drivers/net/wireless/libertas/wext.c @@ -2025,10 +2025,8 @@ static int lbs_get_essid(struct net_device *dev, struct iw_request_info *info, if (priv->connect_status == LBS_CONNECTED) { memcpy(extra, priv->curbssparams.ssid, priv->curbssparams.ssid_len); - extra[priv->curbssparams.ssid_len] = '\0'; } else { memset(extra, 0, 32); - extra[priv->curbssparams.ssid_len] = '\0'; } /* * If none, we may want to get the one that was set diff --git a/drivers/net/wireless/libertas_tf/main.c b/drivers/net/wireless/libertas_tf/main.c index 019431d..26a1abd 100644 --- a/drivers/net/wireless/libertas_tf/main.c +++ b/drivers/net/wireless/libertas_tf/main.c @@ -495,7 +495,6 @@ int lbtf_rx(struct lbtf_private *priv, struct sk_buff *skb) stats.band = IEEE80211_BAND_2GHZ; stats.signal = prxpd->snr; stats.noise = prxpd->nf; - stats.qual = prxpd->snr - prxpd->nf; /* Marvell rate index has a hole at value 4 */ if (prxpd->rx_rate > 4) --prxpd->rx_rate; diff --git a/drivers/net/wireless/orinoco/wext.c b/drivers/net/wireless/orinoco/wext.c index 7698fdd..31ca241 100644 --- a/drivers/net/wireless/orinoco/wext.c +++ b/drivers/net/wireless/orinoco/wext.c @@ -23,7 +23,7 @@ #define MAX_RID_LEN 1024 /* Helper routine to record keys - * Do not call from interrupt context */ + * It is called under orinoco_lock so it may not sleep */ static int orinoco_set_key(struct orinoco_private *priv, int index, enum orinoco_alg alg, const u8 *key, int key_len, const u8 *seq, int seq_len) @@ -32,14 +32,14 @@ static int orinoco_set_key(struct orinoco_private *priv, int index, kzfree(priv->keys[index].seq); if (key_len) { - priv->keys[index].key = kzalloc(key_len, GFP_KERNEL); + priv->keys[index].key = kzalloc(key_len, GFP_ATOMIC); if (!priv->keys[index].key) goto nomem; } else priv->keys[index].key = NULL; if (seq_len) { - priv->keys[index].seq = kzalloc(seq_len, GFP_KERNEL); + priv->keys[index].seq = kzalloc(seq_len, GFP_ATOMIC); if (!priv->keys[index].seq) goto free_key; } else diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h index c5fe867..1a7eae3 100644 --- a/drivers/net/wireless/rt2x00/rt2800.h +++ b/drivers/net/wireless/rt2x00/rt2800.h @@ -1323,7 +1323,7 @@ #define PAIRWISE_KEY_ENTRY(__idx) \ ( PAIRWISE_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry)) ) #define MAC_IVEIV_ENTRY(__idx) \ - ( MAC_IVEIV_TABLE_BASE + ((__idx) & sizeof(struct mac_iveiv_entry)) ) + ( MAC_IVEIV_TABLE_BASE + ((__idx) * sizeof(struct mac_iveiv_entry)) ) #define MAC_WCID_ATTR_ENTRY(__idx) \ ( MAC_WCID_ATTRIBUTE_BASE + ((__idx) * sizeof(u32)) ) #define SHARED_KEY_ENTRY(__idx) \ diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index eb1e1d0..27bf887 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -37,7 +37,7 @@ #include <linux/module.h> #include "rt2x00.h" -#ifdef CONFIG_RT2800USB +#if defined(CONFIG_RT2800USB) || defined(CONFIG_RT2800USB_MODULE) #include "rt2x00usb.h" #endif #include "rt2800lib.h" @@ -1121,7 +1121,7 @@ int rt2800_init_registers(struct rt2x00_dev *rt2x00dev) if (rt2x00_intf_is_usb(rt2x00dev)) { rt2800_register_write(rt2x00dev, USB_DMA_CFG, 0x00000000); -#ifdef CONFIG_RT2800USB +#if defined(CONFIG_RT2800USB) || defined(CONFIG_RT2800USB_MODULE) rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0, USB_MODE_RESET, REGISTER_TIMEOUT); #endif @@ -2022,6 +2022,12 @@ int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev) u16 eeprom; /* + * Disable powersaving as default on PCI devices. + */ + if (rt2x00_intf_is_pci(rt2x00dev)) + rt2x00dev->hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; + + /* * Initialize all hw fields. */ rt2x00dev->hw->flags = @@ -2074,8 +2080,7 @@ int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev) IEEE80211_HT_CAP_SGI_20 | IEEE80211_HT_CAP_SGI_40 | IEEE80211_HT_CAP_TX_STBC | - IEEE80211_HT_CAP_RX_STBC | - IEEE80211_HT_CAP_PSMP_SUPPORT; + IEEE80211_HT_CAP_RX_STBC; spec->ht.ampdu_factor = 3; spec->ht.ampdu_density = 4; spec->ht.mcs.tx_params = @@ -2140,8 +2145,8 @@ static void rt2800_get_tkip_seq(struct ieee80211_hw *hw, u8 hw_key_idx, rt2800_register_multiread(rt2x00dev, offset, &iveiv_entry, sizeof(iveiv_entry)); - memcpy(&iveiv_entry.iv[0], iv16, sizeof(iv16)); - memcpy(&iveiv_entry.iv[4], iv32, sizeof(iv32)); + memcpy(iv16, &iveiv_entry.iv[0], sizeof(*iv16)); + memcpy(iv32, &iveiv_entry.iv[4], sizeof(*iv32)); } static int rt2800_set_rts_threshold(struct ieee80211_hw *hw, u32 value) diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index af85d18..ab95346 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -922,6 +922,7 @@ static struct usb_device_id rt2800usb_device_table[] = { { USB_DEVICE(0x1737, 0x0070), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x1737, 0x0071), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x1737, 0x0077), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x1737, 0x0079), USB_DEVICE_DATA(&rt2800usb_ops) }, /* Logitec */ { USB_DEVICE(0x0789, 0x0162), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x0789, 0x0163), USB_DEVICE_DATA(&rt2800usb_ops) }, diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index 687e17d..0ca5893 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -2539,6 +2539,11 @@ static int rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) unsigned int i; /* + * Disable powersaving as default. + */ + rt2x00dev->hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; + + /* * Initialize all hw fields. */ rt2x00dev->hw->flags = diff --git a/drivers/net/wireless/rtl818x/rtl8180_dev.c b/drivers/net/wireless/rtl818x/rtl8180_dev.c index a1a3dd1..8a40a14 100644 --- a/drivers/net/wireless/rtl818x/rtl8180_dev.c +++ b/drivers/net/wireless/rtl818x/rtl8180_dev.c @@ -132,7 +132,6 @@ static void rtl8180_handle_rx(struct ieee80211_hw *dev) rx_status.antenna = (flags2 >> 15) & 1; /* TODO: improve signal/rssi reporting */ - rx_status.qual = flags2 & 0xFF; rx_status.signal = (flags2 >> 8) & 0x7F; /* XXX: is this correct? */ rx_status.rate_idx = (flags >> 20) & 0xF; diff --git a/drivers/net/wireless/wl12xx/wl1251_boot.c b/drivers/net/wireless/wl12xx/wl1251_boot.c index 2e733e7..28a8086 100644 --- a/drivers/net/wireless/wl12xx/wl1251_boot.c +++ b/drivers/net/wireless/wl12xx/wl1251_boot.c @@ -256,7 +256,7 @@ int wl1251_boot_run_firmware(struct wl1251 *wl) } } - if (loop >= INIT_LOOP) { + if (loop > INIT_LOOP) { wl1251_error("timeout waiting for the hardware to " "complete initialization"); return -EIO; diff --git a/drivers/net/wireless/wl12xx/wl1271_cmd.c b/drivers/net/wireless/wl12xx/wl1271_cmd.c index 886a9bc..c3385b3 100644 --- a/drivers/net/wireless/wl12xx/wl1271_cmd.c +++ b/drivers/net/wireless/wl12xx/wl1271_cmd.c @@ -777,7 +777,7 @@ out: return ret; } -static int wl1271_build_basic_rates(char *rates, u8 band) +static int wl1271_build_basic_rates(u8 *rates, u8 band) { u8 index = 0; @@ -804,7 +804,7 @@ static int wl1271_build_basic_rates(char *rates, u8 band) return index; } -static int wl1271_build_extended_rates(char *rates, u8 band) +static int wl1271_build_extended_rates(u8 *rates, u8 band) { u8 index = 0; diff --git a/drivers/net/wireless/zd1211rw/zd_chip.c b/drivers/net/wireless/zd1211rw/zd_chip.c index dfa1b9bc..7ca95c4 100644 --- a/drivers/net/wireless/zd1211rw/zd_chip.c +++ b/drivers/net/wireless/zd1211rw/zd_chip.c @@ -1325,151 +1325,11 @@ int zd_chip_set_basic_rates(struct zd_chip *chip, u16 cr_rates) return r; } -static int ofdm_qual_db(u8 status_quality, u8 zd_rate, unsigned int size) -{ - static const u16 constants[] = { - 715, 655, 585, 540, 470, 410, 360, 315, - 270, 235, 205, 175, 150, 125, 105, 85, - 65, 50, 40, 25, 15 - }; - - int i; - u32 x; - - /* It seems that their quality parameter is somehow per signal - * and is now transferred per bit. - */ - switch (zd_rate) { - case ZD_OFDM_RATE_6M: - case ZD_OFDM_RATE_12M: - case ZD_OFDM_RATE_24M: - size *= 2; - break; - case ZD_OFDM_RATE_9M: - case ZD_OFDM_RATE_18M: - case ZD_OFDM_RATE_36M: - case ZD_OFDM_RATE_54M: - size *= 4; - size /= 3; - break; - case ZD_OFDM_RATE_48M: - size *= 3; - size /= 2; - break; - default: - return -EINVAL; - } - - x = (10000 * status_quality)/size; - for (i = 0; i < ARRAY_SIZE(constants); i++) { - if (x > constants[i]) - break; - } - - switch (zd_rate) { - case ZD_OFDM_RATE_6M: - case ZD_OFDM_RATE_9M: - i += 3; - break; - case ZD_OFDM_RATE_12M: - case ZD_OFDM_RATE_18M: - i += 5; - break; - case ZD_OFDM_RATE_24M: - case ZD_OFDM_RATE_36M: - i += 9; - break; - case ZD_OFDM_RATE_48M: - case ZD_OFDM_RATE_54M: - i += 15; - break; - default: - return -EINVAL; - } - - return i; -} - -static int ofdm_qual_percent(u8 status_quality, u8 zd_rate, unsigned int size) -{ - int r; - - r = ofdm_qual_db(status_quality, zd_rate, size); - ZD_ASSERT(r >= 0); - if (r < 0) - r = 0; - - r = (r * 100)/29; - return r <= 100 ? r : 100; -} - -static unsigned int log10times100(unsigned int x) -{ - static const u8 log10[] = { - 0, - 0, 30, 47, 60, 69, 77, 84, 90, 95, 100, - 104, 107, 111, 114, 117, 120, 123, 125, 127, 130, - 132, 134, 136, 138, 139, 141, 143, 144, 146, 147, - 149, 150, 151, 153, 154, 155, 156, 157, 159, 160, - 161, 162, 163, 164, 165, 166, 167, 168, 169, 169, - 170, 171, 172, 173, 174, 174, 175, 176, 177, 177, - 178, 179, 179, 180, 181, 181, 182, 183, 183, 184, - 185, 185, 186, 186, 187, 188, 188, 189, 189, 190, - 190, 191, 191, 192, 192, 193, 193, 194, 194, 195, - 195, 196, 196, 197, 197, 198, 198, 199, 199, 200, - 200, 200, 201, 201, 202, 202, 202, 203, 203, 204, - 204, 204, 205, 205, 206, 206, 206, 207, 207, 207, - 208, 208, 208, 209, 209, 210, 210, 210, 211, 211, - 211, 212, 212, 212, 213, 213, 213, 213, 214, 214, - 214, 215, 215, 215, 216, 216, 216, 217, 217, 217, - 217, 218, 218, 218, 219, 219, 219, 219, 220, 220, - 220, 220, 221, 221, 221, 222, 222, 222, 222, 223, - 223, 223, 223, 224, 224, 224, 224, - }; - - return x < ARRAY_SIZE(log10) ? log10[x] : 225; -} - -enum { - MAX_CCK_EVM_DB = 45, -}; - -static int cck_evm_db(u8 status_quality) -{ - return (20 * log10times100(status_quality)) / 100; -} - -static int cck_snr_db(u8 status_quality) -{ - int r = MAX_CCK_EVM_DB - cck_evm_db(status_quality); - ZD_ASSERT(r >= 0); - return r; -} - -static int cck_qual_percent(u8 status_quality) -{ - int r; - - r = cck_snr_db(status_quality); - r = (100*r)/17; - return r <= 100 ? r : 100; -} - static inline u8 zd_rate_from_ofdm_plcp_header(const void *rx_frame) { return ZD_OFDM | zd_ofdm_plcp_header_rate(rx_frame); } -u8 zd_rx_qual_percent(const void *rx_frame, unsigned int size, - const struct rx_status *status) -{ - return (status->frame_status&ZD_RX_OFDM) ? - ofdm_qual_percent(status->signal_quality_ofdm, - zd_rate_from_ofdm_plcp_header(rx_frame), - size) : - cck_qual_percent(status->signal_quality_cck); -} - /** * zd_rx_rate - report zd-rate * @rx_frame - received frame diff --git a/drivers/net/wireless/zd1211rw/zd_chip.h b/drivers/net/wireless/zd1211rw/zd_chip.h index 9fd8f35..f8bbf7d 100644 --- a/drivers/net/wireless/zd1211rw/zd_chip.h +++ b/drivers/net/wireless/zd1211rw/zd_chip.h @@ -929,9 +929,6 @@ static inline int zd_get_beacon_interval(struct zd_chip *chip, u32 *interval) struct rx_status; -u8 zd_rx_qual_percent(const void *rx_frame, unsigned int size, - const struct rx_status *status); - u8 zd_rx_rate(const void *rx_frame, const struct rx_status *status); struct zd_mc_hash { diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c index cf51e8f..8ebf5c3 100644 --- a/drivers/net/wireless/zd1211rw/zd_mac.c +++ b/drivers/net/wireless/zd1211rw/zd_mac.c @@ -828,9 +828,6 @@ int zd_mac_rx(struct ieee80211_hw *hw, const u8 *buffer, unsigned int length) stats.freq = zd_channels[_zd_chip_get_channel(&mac->chip) - 1].center_freq; stats.band = IEEE80211_BAND_2GHZ; stats.signal = status->signal_strength; - stats.qual = zd_rx_qual_percent(buffer, - length - sizeof(struct rx_status), - status); rate = zd_rx_rate(buffer, status); diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index d9724a2..163c840 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -832,7 +832,7 @@ struct ieee80211_ht_cap { #define IEEE80211_HT_CAP_DELAY_BA 0x0400 #define IEEE80211_HT_CAP_MAX_AMSDU 0x0800 #define IEEE80211_HT_CAP_DSSSCCK40 0x1000 -#define IEEE80211_HT_CAP_PSMP_SUPPORT 0x2000 +#define IEEE80211_HT_CAP_RESERVED 0x2000 #define IEEE80211_HT_CAP_40MHZ_INTOLERANT 0x4000 #define IEEE80211_HT_CAP_LSIG_TXOP_PROT 0x8000 diff --git a/include/linux/inetdevice.h b/include/linux/inetdevice.h index 699e85c..b230492 100644 --- a/include/linux/inetdevice.h +++ b/include/linux/inetdevice.h @@ -81,6 +81,7 @@ static inline void ipv4_devconf_setall(struct in_device *in_dev) #define IN_DEV_FORWARD(in_dev) IN_DEV_CONF_GET((in_dev), FORWARDING) #define IN_DEV_MFORWARD(in_dev) IN_DEV_ANDCONF((in_dev), MC_FORWARDING) #define IN_DEV_RPFILTER(in_dev) IN_DEV_MAXCONF((in_dev), RP_FILTER) +#define IN_DEV_SRC_VMARK(in_dev) IN_DEV_ORCONF((in_dev), SRC_VMARK) #define IN_DEV_SOURCE_ROUTE(in_dev) IN_DEV_ANDCONF((in_dev), \ ACCEPT_SOURCE_ROUTE) #define IN_DEV_ACCEPT_LOCAL(in_dev) IN_DEV_ORCONF((in_dev), ACCEPT_LOCAL) diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h index 877ba03..bd27fbc 100644 --- a/include/linux/sysctl.h +++ b/include/linux/sysctl.h @@ -482,6 +482,7 @@ enum NET_IPV4_CONF_ARP_ACCEPT=21, NET_IPV4_CONF_ARP_NOTIFY=22, NET_IPV4_CONF_ACCEPT_LOCAL=23, + NET_IPV4_CONF_SRC_VMARK=24, __NET_IPV4_CONF_MAX }; diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 2aff490..0bf3697 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -547,7 +547,6 @@ enum mac80211_rx_flags { * unspecified depending on the hardware capabilities flags * @IEEE80211_HW_SIGNAL_* * @noise: noise when receiving this frame, in dBm. - * @qual: overall signal quality indication, in percent (0-100). * @antenna: antenna used * @rate_idx: index of data rate into band's supported rates or MCS index if * HT rates are use (RX_FLAG_HT) @@ -559,7 +558,6 @@ struct ieee80211_rx_status { int freq; int signal; int noise; - int __deprecated qual; int antenna; int rate_idx; int flag; @@ -1737,6 +1735,12 @@ static inline void ieee80211_rx_ni(struct ieee80211_hw *hw, local_bh_enable(); } +/* + * The TX headroom reserved by mac80211 for its own tx_status functions. + * This is enough for the radiotap header. + */ +#define IEEE80211_TX_STATUS_HEADROOM 13 + /** * ieee80211_tx_status - transmit status callback * diff --git a/net/core/pktgen.c b/net/core/pktgen.c index a23b45f..de0c2c7 100644 --- a/net/core/pktgen.c +++ b/net/core/pktgen.c @@ -250,8 +250,7 @@ struct pktgen_dev { __u64 count; /* Default No packets to send */ __u64 sofar; /* How many pkts we've sent so far */ __u64 tx_bytes; /* How many bytes we've transmitted */ - __u64 errors; /* Errors when trying to transmit, - pkts will be re-sent */ + __u64 errors; /* Errors when trying to transmit, */ /* runtime counters relating to clone_skb */ @@ -3465,6 +3464,12 @@ static void pktgen_xmit(struct pktgen_dev *pkt_dev) pkt_dev->seq_num++; pkt_dev->tx_bytes += pkt_dev->last_pkt_size; break; + case NET_XMIT_DROP: + case NET_XMIT_CN: + case NET_XMIT_POLICED: + /* skb has been consumed */ + pkt_dev->errors++; + break; default: /* Drivers are not supposed to return other values! */ if (net_ratelimit()) pr_info("pktgen: %s xmit error: %d\n", diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c index 5cdbc10..040c4f0 100644 --- a/net/ipv4/devinet.c +++ b/net/ipv4/devinet.c @@ -1397,6 +1397,7 @@ static struct devinet_sysctl_table { DEVINET_SYSCTL_RW_ENTRY(ACCEPT_SOURCE_ROUTE, "accept_source_route"), DEVINET_SYSCTL_RW_ENTRY(ACCEPT_LOCAL, "accept_local"), + DEVINET_SYSCTL_RW_ENTRY(SRC_VMARK, "src_valid_mark"), DEVINET_SYSCTL_RW_ENTRY(PROXY_ARP, "proxy_arp"), DEVINET_SYSCTL_RW_ENTRY(MEDIUM_ID, "medium_id"), DEVINET_SYSCTL_RW_ENTRY(BOOTP_RELAY, "bootp_relay"), diff --git a/net/ipv4/fib_frontend.c b/net/ipv4/fib_frontend.c index 3323168..82dbf71 100644 --- a/net/ipv4/fib_frontend.c +++ b/net/ipv4/fib_frontend.c @@ -252,6 +252,8 @@ int fib_validate_source(__be32 src, __be32 dst, u8 tos, int oif, no_addr = in_dev->ifa_list == NULL; rpf = IN_DEV_RPFILTER(in_dev); accept_local = IN_DEV_ACCEPT_LOCAL(in_dev); + if (mark && !IN_DEV_SRC_VMARK(in_dev)) + fl.mark = 0; } rcu_read_unlock(); diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c index 3787455..d7dcee6 100644 --- a/net/mac80211/ht.c +++ b/net/mac80211/ht.c @@ -34,9 +34,28 @@ void ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_supported_band *sband, ht_cap->ht_supported = true; - ht_cap->cap = le16_to_cpu(ht_cap_ie->cap_info) & sband->ht_cap.cap; - ht_cap->cap &= ~IEEE80211_HT_CAP_SM_PS; - ht_cap->cap |= sband->ht_cap.cap & IEEE80211_HT_CAP_SM_PS; + /* + * The bits listed in this expression should be + * the same for the peer and us, if the station + * advertises more then we can't use those thus + * we mask them out. + */ + ht_cap->cap = le16_to_cpu(ht_cap_ie->cap_info) & + (sband->ht_cap.cap | + ~(IEEE80211_HT_CAP_LDPC_CODING | + IEEE80211_HT_CAP_SUP_WIDTH_20_40 | + IEEE80211_HT_CAP_GRN_FLD | + IEEE80211_HT_CAP_SGI_20 | + IEEE80211_HT_CAP_SGI_40 | + IEEE80211_HT_CAP_DSSSCCK40)); + /* + * The STBC bits are asymmetric -- if we don't have + * TX then mask out the peer's RX and vice versa. + */ + if (!(sband->ht_cap.cap & IEEE80211_HT_CAP_TX_STBC)) + ht_cap->cap &= ~IEEE80211_HT_CAP_RX_STBC; + if (!(sband->ht_cap.cap & IEEE80211_HT_CAP_RX_STBC)) + ht_cap->cap &= ~IEEE80211_HT_CAP_TX_STBC; ampdu_info = ht_cap_ie->ampdu_params_info; ht_cap->ampdu_factor = diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index 10d1385..1f2db64 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -382,6 +382,7 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata, struct sta_info *ieee80211_ibss_add_sta(struct ieee80211_sub_if_data *sdata, u8 *bssid,u8 *addr, u32 supp_rates) { + struct ieee80211_if_ibss *ifibss = &sdata->u.ibss; struct ieee80211_local *local = sdata->local; struct sta_info *sta; int band = local->hw.conf.channel->band; @@ -397,6 +398,9 @@ struct sta_info *ieee80211_ibss_add_sta(struct ieee80211_sub_if_data *sdata, return NULL; } + if (ifibss->state == IEEE80211_IBSS_MLME_SEARCH) + return NULL; + if (compare_ether_addr(bssid, sdata->u.ibss.bssid)) return NULL; diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 8116d1a..0d2d948 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -515,6 +515,8 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) * and we need some headroom for passing the frame to monitor * interfaces, but never both at the same time. */ + BUILD_BUG_ON(IEEE80211_TX_STATUS_HEADROOM != + sizeof(struct ieee80211_tx_status_rtap_hdr)); local->tx_headroom = max_t(unsigned int , local->hw.extra_tx_headroom, sizeof(struct ieee80211_tx_status_rtap_hdr)); diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index d8d50fb..c79e59f 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -915,6 +915,14 @@ static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata, sdata->u.mgd.flags &= ~(IEEE80211_STA_CONNECTION_POLL | IEEE80211_STA_BEACON_POLL); + /* + * Always handle WMM once after association regardless + * of the first value the AP uses. Setting -1 here has + * that effect because the AP values is an unsigned + * 4-bit value. + */ + sdata->u.mgd.wmm_last_param_set = -1; + ieee80211_led_assoc(local, 1); sdata->vif.bss_conf.assoc = 1; diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 8834cc9..27ceaef 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -1419,6 +1419,10 @@ static bool need_dynamic_ps(struct ieee80211_local *local) if (!local->ps_sdata) return false; + /* No point if we're going to suspend */ + if (local->quiescing) + return false; + return true; } diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 78a6e92..dc76267 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -1039,7 +1039,19 @@ int ieee80211_reconfig(struct ieee80211_local *local) /* restart hardware */ if (local->open_count) { + /* + * Upon resume hardware can sometimes be goofy due to + * various platform / driver / bus issues, so restarting + * the device may at times not work immediately. Propagate + * the error. + */ res = drv_start(local); + if (res) { + WARN(local->suspended, "Harware became unavailable " + "upon resume. This is could be a software issue" + "prior to suspend or a harware issue\n"); + return res; + } ieee80211_led_radio(local, true); } diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c index 1001db4..82e6002 100644 --- a/net/wireless/mlme.c +++ b/net/wireless/mlme.c @@ -93,7 +93,18 @@ void cfg80211_send_rx_assoc(struct net_device *dev, const u8 *buf, size_t len) } } - WARN_ON(!bss); + /* + * We might be coming here because the driver reported + * a successful association at the same time as the + * user requested a deauth. In that case, we will have + * removed the BSS from the auth_bsses list due to the + * deauth request when the assoc response makes it. If + * the two code paths acquire the lock the other way + * around, that's just the standard situation of a + * deauth being requested while connected. + */ + if (!bss) + goto out; } else if (wdev->conn) { cfg80211_sme_failed_assoc(wdev); /* diff --git a/net/wireless/scan.c b/net/wireless/scan.c index 12dfa62..0c2cbbe 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -601,7 +601,7 @@ int cfg80211_wext_siwscan(struct net_device *dev, struct cfg80211_registered_device *rdev; struct wiphy *wiphy; struct iw_scan_req *wreq = NULL; - struct cfg80211_scan_request *creq; + struct cfg80211_scan_request *creq = NULL; int i, err, n_channels = 0; enum ieee80211_band band; @@ -694,8 +694,10 @@ int cfg80211_wext_siwscan(struct net_device *dev, /* translate "Scan for SSID" request */ if (wreq) { if (wrqu->data.flags & IW_SCAN_THIS_ESSID) { - if (wreq->essid_len > IEEE80211_MAX_SSID_LEN) - return -EINVAL; + if (wreq->essid_len > IEEE80211_MAX_SSID_LEN) { + err = -EINVAL; + goto out; + } memcpy(creq->ssids[0].ssid, wreq->essid, wreq->essid_len); creq->ssids[0].ssid_len = wreq->essid_len; } @@ -707,12 +709,15 @@ int cfg80211_wext_siwscan(struct net_device *dev, err = rdev->ops->scan(wiphy, dev, creq); if (err) { rdev->scan_req = NULL; - kfree(creq); + /* creq will be freed below */ } else { nl80211_send_scan_start(rdev, dev); + /* creq now owned by driver */ + creq = NULL; dev_hold(dev); } out: + kfree(creq); cfg80211_unlock_rdev(rdev); return err; } diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c index cb81ca3..4725a54 100644 --- a/net/xfrm/xfrm_policy.c +++ b/net/xfrm/xfrm_policy.c @@ -1445,7 +1445,7 @@ static struct dst_entry *xfrm_bundle_create(struct xfrm_policy *policy, if (!dev) goto free_dst; - /* Copy neighbout for reachability confirmation */ + /* Copy neighbour for reachability confirmation */ dst0->neighbour = neigh_clone(dst->neighbour); xfrm_init_path((struct xfrm_dst *)dst0, dst, nfheader_len); |
