summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/parport/parport_serial.c339
-rw-r--r--drivers/serial/8250_pci.c21
-rw-r--r--include/linux/8250_pci.h3
-rw-r--r--include/linux/serialP.h40
4 files changed, 167 insertions, 236 deletions
diff --git a/drivers/parport/parport_serial.c b/drivers/parport/parport_serial.c
index 00498e2..d3dad0a 100644
--- a/drivers/parport/parport_serial.c
+++ b/drivers/parport/parport_serial.c
@@ -23,13 +23,8 @@
#include <linux/pci.h>
#include <linux/parport.h>
#include <linux/parport_pc.h>
-#include <linux/serial.h>
-#include <linux/serialP.h>
-#include <linux/list.h>
#include <linux/8250_pci.h>
-#include <asm/serial.h>
-
enum parport_pc_pci_cards {
titan_110l = 0,
titan_210l,
@@ -168,182 +163,147 @@ static struct pci_device_id parport_serial_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci,parport_serial_pci_tbl);
-struct pci_board_no_ids {
- int flags;
- int num_ports;
- int base_baud;
- int uart_offset;
- int reg_shift;
- int (*init_fn)(struct pci_dev *dev, struct pci_board_no_ids *board,
- int enable);
- int first_uart_offset;
-};
-
-static int __devinit siig10x_init_fn(struct pci_dev *dev, struct pci_board_no_ids *board, int enable)
-{
- return pci_siig10x_fn(dev, enable);
-}
-
-static int __devinit siig20x_init_fn(struct pci_dev *dev, struct pci_board_no_ids *board, int enable)
-{
- return pci_siig20x_fn(dev, enable);
-}
-
-static int __devinit netmos_serial_init(struct pci_dev *dev, struct pci_board_no_ids *board, int enable)
-{
- board->num_ports = dev->subsystem_device & 0xf;
- return 0;
-}
-
-static struct pci_board_no_ids pci_boards[] __devinitdata = {
- /*
- * PCI Flags, Number of Ports, Base (Maximum) Baud Rate,
- * Offset to get to next UART's registers,
- * Register shift to use for memory-mapped I/O,
- * Initialization function, first UART offset
- */
-
-// Cards not tested are marked n/t
-// If you have one of these cards and it works for you, please tell me..
-
-/* titan_110l */ { SPCI_FL_BASE1 | SPCI_FL_BASE_TABLE, 1, 921600 },
-/* titan_210l */ { SPCI_FL_BASE1 | SPCI_FL_BASE_TABLE, 2, 921600 },
-/* netmos_9xx5_combo */ { SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 1, 115200, 0, 0, netmos_serial_init },
-/* netmos_9855 */ { SPCI_FL_BASE2 | SPCI_FL_BASE_TABLE, 1, 115200, 0, 0, netmos_serial_init },
-/* avlab_1s1p (n/t) */ { SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 1, 115200 },
-/* avlab_1s1p_650 (nt)*/{ SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 1, 115200 },
-/* avlab_1s1p_850 (nt)*/{ SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 1, 115200 },
-/* avlab_1s2p (n/t) */ { SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 1, 115200 },
-/* avlab_1s2p_650 (nt)*/{ SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 1, 115200 },
-/* avlab_1s2p_850 (nt)*/{ SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 1, 115200 },
-/* avlab_2s1p (n/t) */ { SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 2, 115200 },
-/* avlab_2s1p_650 (nt)*/{ SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 2, 115200 },
-/* avlab_2s1p_850 (nt)*/{ SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 2, 115200 },
-/* siig_1s1p_10x */ { SPCI_FL_BASE2, 1, 460800, 0, 0, siig10x_init_fn },
-/* siig_2s1p_10x */ { SPCI_FL_BASE2, 1, 921600, 0, 0, siig10x_init_fn },
-/* siig_2p1s_20x */ { SPCI_FL_BASE0, 1, 921600, 0, 0, siig20x_init_fn },
-/* siig_1s1p_20x */ { SPCI_FL_BASE0, 1, 921600, 0, 0, siig20x_init_fn },
-/* siig_2s1p_20x */ { SPCI_FL_BASE0, 1, 921600, 0, 0, siig20x_init_fn },
+/*
+ * This table describes the serial "geometry" of these boards. Any
+ * quirks for these can be found in drivers/serial/8250_pci.c
+ *
+ * Cards not tested are marked n/t
+ * If you have one of these cards and it works for you, please tell me..
+ */
+static struct pciserial_board pci_parport_serial_boards[] __devinitdata = {
+ [titan_110l] = {
+ .flags = FL_BASE1 | FL_BASE_BARS,
+ .num_ports = 1,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [titan_210l] = {
+ .flags = FL_BASE1 | FL_BASE_BARS,
+ .num_ports = 2,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [netmos_9xx5_combo] = {
+ .flags = FL_BASE0 | FL_BASE_BARS,
+ .num_ports = 1,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [netmos_9855] = {
+ .flags = FL_BASE2 | FL_BASE_BARS,
+ .num_ports = 1,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [avlab_1s1p] = { /* n/t */
+ .flags = FL_BASE0 | FL_BASE_BARS,
+ .num_ports = 1,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [avlab_1s1p_650] = { /* nt */
+ .flags = FL_BASE0 | FL_BASE_BARS,
+ .num_ports = 1,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [avlab_1s1p_850] = { /* nt */
+ .flags = FL_BASE0 | FL_BASE_BARS,
+ .num_ports = 1,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [avlab_1s2p] = { /* n/t */
+ .flags = FL_BASE0 | FL_BASE_BARS,
+ .num_ports = 1,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [avlab_1s2p_650] = { /* nt */
+ .flags = FL_BASE0 | FL_BASE_BARS,
+ .num_ports = 1,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [avlab_1s2p_850] = { /* nt */
+ .flags = FL_BASE0 | FL_BASE_BARS,
+ .num_ports = 1,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [avlab_2s1p] = { /* n/t */
+ .flags = FL_BASE0 | FL_BASE_BARS,
+ .num_ports = 2,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [avlab_2s1p_650] = { /* nt */
+ .flags = FL_BASE0 | FL_BASE_BARS,
+ .num_ports = 2,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [avlab_2s1p_850] = { /* nt */
+ .flags = FL_BASE0 | FL_BASE_BARS,
+ .num_ports = 2,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [siig_1s1p_10x] = {
+ .flags = FL_BASE2,
+ .num_ports = 1,
+ .base_baud = 460800,
+ .uart_offset = 8,
+ },
+ [siig_2s1p_10x] = {
+ .flags = FL_BASE2,
+ .num_ports = 1,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [siig_2p1s_20x] = {
+ .flags = FL_BASE0,
+ .num_ports = 1,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [siig_1s1p_20x] = {
+ .flags = FL_BASE0,
+ .num_ports = 1,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [siig_2s1p_20x] = {
+ .flags = FL_BASE0,
+ .num_ports = 1,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
};
struct parport_serial_private {
- int num_ser;
- int line[20];
- struct pci_board_no_ids ser;
+ struct serial_private *serial;
int num_par;
struct parport *port[PARPORT_MAX];
struct parport_pc_pci par;
};
-static int __devinit get_pci_port (struct pci_dev *dev,
- struct pci_board_no_ids *board,
- struct serial_struct *req,
- int idx)
-{
- unsigned long port;
- int base_idx;
- int max_port;
- int offset;
-
- base_idx = SPCI_FL_GET_BASE(board->flags);
- if (board->flags & SPCI_FL_BASE_TABLE)
- base_idx += idx;
-
- if (board->flags & SPCI_FL_REGION_SZ_CAP) {
- max_port = pci_resource_len(dev, base_idx) / 8;
- if (idx >= max_port)
- return 1;
- }
-
- offset = board->first_uart_offset;
-
- /* Timedia/SUNIX uses a mixture of BARs and offsets */
- /* Ugh, this is ugly as all hell --- TYT */
- if(dev->vendor == PCI_VENDOR_ID_TIMEDIA ) /* 0x1409 */
- switch(idx) {
- case 0: base_idx=0;
- break;
- case 1: base_idx=0; offset=8;
- break;
- case 2: base_idx=1;
- break;
- case 3: base_idx=1; offset=8;
- break;
- case 4: /* BAR 2*/
- case 5: /* BAR 3 */
- case 6: /* BAR 4*/
- case 7: base_idx=idx-2; /* BAR 5*/
- }
-
- port = pci_resource_start(dev, base_idx) + offset;
-
- if ((board->flags & SPCI_FL_BASE_TABLE) == 0)
- port += idx * (board->uart_offset ? board->uart_offset : 8);
-
- if (pci_resource_flags (dev, base_idx) & IORESOURCE_IO) {
- int high_bits_offset = ((sizeof(long)-sizeof(int))*8);
- req->port = port;
- if (high_bits_offset)
- req->port_high = port >> high_bits_offset;
- else
- req->port_high = 0;
- return 0;
- }
- req->io_type = SERIAL_IO_MEM;
- req->iomem_base = ioremap(port, board->uart_offset);
- req->iomem_reg_shift = board->reg_shift;
- req->port = 0;
- return req->iomem_base ? 0 : 1;
-}
-
/* Register the serial port(s) of a PCI card. */
static int __devinit serial_register (struct pci_dev *dev,
const struct pci_device_id *id)
{
- struct pci_board_no_ids *board;
struct parport_serial_private *priv = pci_get_drvdata (dev);
- struct serial_struct serial_req;
- int base_baud;
- int k;
- int success = 0;
-
- priv->ser = pci_boards[id->driver_data];
- board = &priv->ser;
- if (board->init_fn && ((board->init_fn) (dev, board, 1) != 0))
- return 1;
-
- base_baud = board->base_baud;
- if (!base_baud)
- base_baud = BASE_BAUD;
- memset (&serial_req, 0, sizeof (serial_req));
-
- for (k = 0; k < board->num_ports; k++) {
- int line;
+ struct pciserial_board *board;
+ struct serial_private *serial;
- if (priv->num_ser == ARRAY_SIZE (priv->line)) {
- printk (KERN_WARNING
- "parport_serial: %s: only %u serial lines "
- "supported (%d reported)\n", pci_name (dev),
- ARRAY_SIZE (priv->line), board->num_ports);
- break;
- }
+ board = &pci_parport_serial_boards[id->driver_data];
+ serial = pciserial_init_ports(dev, board);
- serial_req.irq = dev->irq;
- if (get_pci_port (dev, board, &serial_req, k))
- break;
- serial_req.flags = ASYNC_SKIP_TEST | ASYNC_AUTOPROBE;
- serial_req.baud_base = base_baud;
- line = register_serial (&serial_req);
- if (line < 0) {
- printk (KERN_DEBUG
- "parport_serial: register_serial failed\n");
- continue;
- }
- priv->line[priv->num_ser++] = line;
- success = 1;
- }
+ if (IS_ERR(serial))
+ return PTR_ERR(serial);
- return success ? 0 : 1;
+ priv->serial = serial;
+ return 0;
}
/* Register the parallel port(s) of a PCI card. */
@@ -411,7 +371,7 @@ static int __devinit parport_serial_pci_probe (struct pci_dev *dev,
priv = kmalloc (sizeof *priv, GFP_KERNEL);
if (!priv)
return -ENOMEM;
- priv->num_ser = priv->num_par = 0;
+ memset(priv, 0, sizeof(struct parport_serial_private));
pci_set_drvdata (dev, priv);
err = pci_enable_device (dev);
@@ -444,15 +404,12 @@ static void __devexit parport_serial_pci_remove (struct pci_dev *dev)
struct parport_serial_private *priv = pci_get_drvdata (dev);
int i;
+ pci_set_drvdata(dev, NULL);
+
// Serial ports
- for (i = 0; i < priv->num_ser; i++) {
- unregister_serial (priv->line[i]);
+ if (priv->serial)
+ pciserial_remove_ports(priv->serial);
- if (priv->ser.init_fn)
- (priv->ser.init_fn) (dev, &priv->ser, 0);
- }
- pci_set_drvdata (dev, NULL);
-
// Parallel ports
for (i = 0; i < priv->num_par; i++)
parport_pc_unregister_port (priv->port[i]);
@@ -461,11 +418,47 @@ static void __devexit parport_serial_pci_remove (struct pci_dev *dev)
return;
}
+static int parport_serial_pci_suspend(struct pci_dev *dev, pm_message_t state)
+{
+ struct parport_serial_private *priv = pci_get_drvdata(dev);
+
+ if (priv->serial)
+ pciserial_suspend_ports(priv->serial);
+
+ /* FIXME: What about parport? */
+
+ pci_save_state(dev);
+ pci_set_power_state(dev, pci_choose_state(dev, state));
+ return 0;
+}
+
+static int parport_serial_pci_resume(struct pci_dev *dev)
+{
+ struct parport_serial_private *priv = pci_get_drvdata(dev);
+
+ pci_set_power_state(dev, PCI_D0);
+ pci_restore_state(dev);
+
+ /*
+ * The device may have been disabled. Re-enable it.
+ */
+ pci_enable_device(dev);
+
+ if (priv->serial)
+ pciserial_resume_ports(priv->serial);
+
+ /* FIXME: What about parport? */
+
+ return 0;
+}
+
static struct pci_driver parport_serial_pci_driver = {
.name = "parport_serial",
.id_table = parport_serial_pci_tbl,
.probe = parport_serial_pci_probe,
.remove = __devexit_p(parport_serial_pci_remove),
+ .suspend = parport_serial_pci_suspend,
+ .resume = parport_serial_pci_resume,
};
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 4e9084e..52b0a05 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -46,7 +46,7 @@ struct pci_serial_quirk {
u32 subdevice;
int (*init)(struct pci_dev *dev);
int (*setup)(struct serial_private *, struct pciserial_board *,
- struct uart_port *port, int idx);
+ struct uart_port *, int);
void (*exit)(struct pci_dev *dev);
};
@@ -436,25 +436,6 @@ static int pci_siig_init(struct pci_dev *dev)
return -ENODEV;
}
-int pci_siig10x_fn(struct pci_dev *dev, int enable)
-{
- int ret = 0;
- if (enable)
- ret = pci_siig10x_init(dev);
- return ret;
-}
-
-int pci_siig20x_fn(struct pci_dev *dev, int enable)
-{
- int ret = 0;
- if (enable)
- ret = pci_siig20x_init(dev);
- return ret;
-}
-
-EXPORT_SYMBOL(pci_siig10x_fn);
-EXPORT_SYMBOL(pci_siig20x_fn);
-
/*
* Timedia has an explosion of boards, and to avoid the PCI table from
* growing *huge*, we use this function to collapse some 70 entries
diff --git a/include/linux/8250_pci.h b/include/linux/8250_pci.h
index 192c0ff..3209dd4 100644
--- a/include/linux/8250_pci.h
+++ b/include/linux/8250_pci.h
@@ -35,6 +35,3 @@ pciserial_init_ports(struct pci_dev *dev, struct pciserial_board *board);
void pciserial_remove_ports(struct serial_private *priv);
void pciserial_suspend_ports(struct serial_private *priv);
void pciserial_resume_ports(struct serial_private *priv);
-
-int pci_siig10x_fn(struct pci_dev *dev, int enable);
-int pci_siig20x_fn(struct pci_dev *dev, int enable);
diff --git a/include/linux/serialP.h b/include/linux/serialP.h
index 2b2f35a..2b9e6b9 100644
--- a/include/linux/serialP.h
+++ b/include/linux/serialP.h
@@ -140,44 +140,4 @@ struct rs_multiport_struct {
#define ALPHA_KLUDGE_MCR 0
#endif
-/*
- * Definitions for PCI support.
- */
-#define SPCI_FL_BASE_MASK 0x0007
-#define SPCI_FL_BASE0 0x0000
-#define SPCI_FL_BASE1 0x0001
-#define SPCI_FL_BASE2 0x0002
-#define SPCI_FL_BASE3 0x0003
-#define SPCI_FL_BASE4 0x0004
-#define SPCI_FL_GET_BASE(x) (x & SPCI_FL_BASE_MASK)
-
-#define SPCI_FL_IRQ_MASK (0x0007 << 4)
-#define SPCI_FL_IRQBASE0 (0x0000 << 4)
-#define SPCI_FL_IRQBASE1 (0x0001 << 4)
-#define SPCI_FL_IRQBASE2 (0x0002 << 4)
-#define SPCI_FL_IRQBASE3 (0x0003 << 4)
-#define SPCI_FL_IRQBASE4 (0x0004 << 4)
-#define SPCI_FL_GET_IRQBASE(x) ((x & SPCI_FL_IRQ_MASK) >> 4)
-
-/* Use successive BARs (PCI base address registers),
- else use offset into some specified BAR */
-#define SPCI_FL_BASE_TABLE 0x0100
-
-/* Use successive entries in the irq resource table */
-#define SPCI_FL_IRQ_TABLE 0x0200
-
-/* Use the irq resource table instead of dev->irq */
-#define SPCI_FL_IRQRESOURCE 0x0400
-
-/* Use the Base address register size to cap number of ports */
-#define SPCI_FL_REGION_SZ_CAP 0x0800
-
-/* Do not use irq sharing for this device */
-#define SPCI_FL_NO_SHIRQ 0x1000
-
-/* This is a PNP device */
-#define SPCI_FL_ISPNP 0x2000
-
-#define SPCI_FL_PNPDEFAULT (SPCI_FL_IRQRESOURCE|SPCI_FL_ISPNP)
-
#endif /* _LINUX_SERIAL_H */
OpenPOWER on IntegriCloud