summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--arch/arm/Kconfig7
-rw-r--r--arch/arm/Makefile2
-rw-r--r--arch/arm/mach-s3c2410/include/mach/dma.h2
-rw-r--r--arch/arm/mach-s3c2410/include/mach/irqs.h28
-rw-r--r--arch/arm/mach-s3c2410/include/mach/map.h8
-rw-r--r--arch/arm/mach-s3c2410/include/mach/regs-clock.h2
-rw-r--r--arch/arm/mach-s3c2410/include/mach/regs-dsc.h36
-rw-r--r--arch/arm/mach-s3c2410/include/mach/regs-gpio.h28
-rw-r--r--arch/arm/mach-s3c2410/include/mach/regs-irq.h10
-rw-r--r--arch/arm/mach-s3c2410/include/mach/regs-s3c2416-mem.h30
-rw-r--r--arch/arm/mach-s3c2410/include/mach/regs-s3c2416.h24
-rw-r--r--arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h3
-rw-r--r--arch/arm/mach-s3c2410/include/mach/uncompress.h4
-rw-r--r--arch/arm/mach-s3c2412/Kconfig3
-rw-r--r--arch/arm/mach-s3c2416/Kconfig39
-rw-r--r--arch/arm/mach-s3c2416/Makefile19
-rw-r--r--arch/arm/mach-s3c2416/clock.c135
-rw-r--r--arch/arm/mach-s3c2416/irq.c254
-rw-r--r--arch/arm/mach-s3c2416/mach-smdk2416.c206
-rw-r--r--arch/arm/mach-s3c2416/s3c2416.c130
-rw-r--r--arch/arm/mach-s3c2443/Kconfig1
-rw-r--r--arch/arm/mach-s3c2443/clock.c479
-rw-r--r--arch/arm/mach-s3c64xx/include/mach/pll.h35
-rw-r--r--arch/arm/plat-s3c24xx/Kconfig6
-rw-r--r--arch/arm/plat-s3c24xx/Makefile1
-rw-r--r--arch/arm/plat-s3c24xx/cpu.c21
-rw-r--r--arch/arm/plat-s3c24xx/include/plat/pll.h25
-rw-r--r--arch/arm/plat-s3c24xx/include/plat/s3c2416.h31
-rw-r--r--arch/arm/plat-s3c24xx/include/plat/s3c2443.h19
-rw-r--r--arch/arm/plat-s3c24xx/s3c2410-clock.c15
-rw-r--r--arch/arm/plat-s3c24xx/s3c2443-clock.c472
-rw-r--r--arch/arm/plat-samsung/clock.c15
-rw-r--r--arch/arm/plat-samsung/dev-fb.c1
-rw-r--r--arch/arm/plat-samsung/include/plat/clock.h1
-rw-r--r--arch/arm/plat-samsung/include/plat/cpu.h1
-rw-r--r--arch/arm/plat-samsung/include/plat/fb.h7
-rw-r--r--arch/arm/plat-samsung/include/plat/pll6553x.h51
-rw-r--r--drivers/serial/Kconfig7
38 files changed, 1631 insertions, 527 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 92622eb..3f8718f 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -647,7 +647,7 @@ config ARCH_SA1100
Support for StrongARM 11x0 based boards.
config ARCH_S3C2410
- bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443"
+ bool "Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443, S3C2450"
select GENERIC_GPIO
select ARCH_HAS_CPUFREQ
select HAVE_CLK
@@ -656,6 +656,10 @@ config ARCH_S3C2410
BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
the Samsung SMDK2410 development board (and derivatives).
+ Note, the S3C2416 and the S3C2450 are so close that they even share
+ the same SoC ID code. This means that there is no seperate machine
+ directory (no arch/arm/mach-s3c2450) as the S3C2416 was first.
+
config ARCH_S3C64XX
bool "Samsung S3C64XX"
select PLAT_SAMSUNG
@@ -892,6 +896,7 @@ if ARCH_S3C2410
source "arch/arm/mach-s3c2400/Kconfig"
source "arch/arm/mach-s3c2410/Kconfig"
source "arch/arm/mach-s3c2412/Kconfig"
+source "arch/arm/mach-s3c2416/Kconfig"
source "arch/arm/mach-s3c2440/Kconfig"
source "arch/arm/mach-s3c2443/Kconfig"
endif
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index eddcbba..9505a70 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -162,7 +162,7 @@ machine-$(CONFIG_ARCH_PNX4008) := pnx4008
machine-$(CONFIG_ARCH_PXA) := pxa
machine-$(CONFIG_ARCH_REALVIEW) := realview
machine-$(CONFIG_ARCH_RPC) := rpc
-machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2443
+machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2416 s3c2440 s3c2443
machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0
machine-$(CONFIG_ARCH_S3C64XX) := s3c64xx
machine-$(CONFIG_ARCH_S5P6440) := s5p6440
diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h
index 08ac5f9..cf68136 100644
--- a/arch/arm/mach-s3c2410/include/mach/dma.h
+++ b/arch/arm/mach-s3c2410/include/mach/dma.h
@@ -54,7 +54,7 @@ enum dma_ch {
#define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */
/* we have 4 dma channels */
-#ifndef CONFIG_CPU_S3C2443
+#if !defined(CONFIG_CPU_S3C2443) && !defined(CONFIG_CPU_S3C2416)
#define S3C_DMA_CHANNELS (4)
#else
#define S3C_DMA_CHANNELS (6)
diff --git a/arch/arm/mach-s3c2410/include/mach/irqs.h b/arch/arm/mach-s3c2410/include/mach/irqs.h
index 6c12c63..11bb0f0 100644
--- a/arch/arm/mach-s3c2410/include/mach/irqs.h
+++ b/arch/arm/mach-s3c2410/include/mach/irqs.h
@@ -115,6 +115,26 @@
#define IRQ_S3C2412_SDI S3C2410_IRQSUB(13)
#define IRQ_S3C2412_CF S3C2410_IRQSUB(14)
+
+#define IRQ_S3C2416_EINT8t15 S3C2410_IRQ(5)
+#define IRQ_S3C2416_DMA S3C2410_IRQ(17)
+#define IRQ_S3C2416_UART3 S3C2410_IRQ(18)
+#define IRQ_S3C2416_SDI1 S3C2410_IRQ(20)
+#define IRQ_S3C2416_SDI0 S3C2410_IRQ(21)
+
+#define IRQ_S3C2416_LCD2 S3C2410_IRQSUB(15)
+#define IRQ_S3C2416_LCD3 S3C2410_IRQSUB(16)
+#define IRQ_S3C2416_LCD4 S3C2410_IRQSUB(17)
+#define IRQ_S3C2416_DMA0 S3C2410_IRQSUB(18)
+#define IRQ_S3C2416_DMA1 S3C2410_IRQSUB(19)
+#define IRQ_S3C2416_DMA2 S3C2410_IRQSUB(20)
+#define IRQ_S3C2416_DMA3 S3C2410_IRQSUB(21)
+#define IRQ_S3C2416_DMA4 S3C2410_IRQSUB(22)
+#define IRQ_S3C2416_DMA5 S3C2410_IRQSUB(23)
+#define IRQ_S32416_WDT S3C2410_IRQSUB(27)
+#define IRQ_S32416_AC97 S3C2410_IRQSUB(28)
+
+
/* extra irqs for s3c2440 */
#define IRQ_S3C2440_CAM_C S3C2410_IRQSUB(11) /* S3C2443 too */
@@ -130,7 +150,10 @@
#define IRQ_S3C2443_HSMMC S3C2410_IRQ(20) /* IRQ_SDI */
#define IRQ_S3C2443_NAND S3C2410_IRQ(24) /* reserved */
+#define IRQ_S3C2416_HSMMC0 S3C2410_IRQ(21) /* S3C2416/S3C2450 */
+
#define IRQ_HSMMC0 IRQ_S3C2443_HSMMC
+#define IRQ_HSMMC1 IRQ_S3C2416_HSMMC0
#define IRQ_S3C2443_LCD1 S3C2410_IRQSUB(14)
#define IRQ_S3C2443_LCD2 S3C2410_IRQSUB(15)
@@ -152,7 +175,7 @@
#define IRQ_S3C2443_WDT S3C2410_IRQSUB(27)
#define IRQ_S3C2443_AC97 S3C2410_IRQSUB(28)
-#ifdef CONFIG_CPU_S3C2443
+#if defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416)
#define NR_IRQS (IRQ_S3C2443_AC97+1)
#else
#define NR_IRQS (IRQ_S3C2440_AC97+1)
@@ -164,6 +187,9 @@
#define IRQ_S3CUART_TX3 IRQ_S3C2443_TX3
#define IRQ_S3CUART_ERR3 IRQ_S3C2443_ERR3
+#define IRQ_LCD_VSYNC IRQ_S3C2443_LCD3
+#define IRQ_LCD_SYSTEM IRQ_S3C2443_LCD2
+
#ifdef CONFIG_CPU_S3C2440
#define IRQ_S3C244x_AC97 IRQ_S3C2440_AC97
#else
diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h
index b049e61..091c98a 100644
--- a/arch/arm/mach-s3c2410/include/mach/map.h
+++ b/arch/arm/mach-s3c2410/include/mach/map.h
@@ -63,9 +63,11 @@
#define S3C2440_PA_AC97 (0x5B000000)
#define S3C2440_SZ_AC97 SZ_1M
-/* S3C2443 High-speed SD/MMC */
+/* S3C2443/S3C2416 High-speed SD/MMC */
#define S3C2443_PA_HSMMC (0x4A800000)
-#define S3C2443_SZ_HSMMC (256)
+#define S3C2416_PA_HSMMC0 (0x4AC00000)
+
+#define S3C2443_PA_FB (0x4C800000)
/* S3C2412 memory and IO controls */
#define S3C2412_PA_SSMC (0x4F000000)
@@ -106,10 +108,12 @@
#define S3C24XX_PA_SDI S3C2410_PA_SDI
#define S3C24XX_PA_NAND S3C2410_PA_NAND
+#define S3C_PA_FB S3C2443_PA_FB
#define S3C_PA_IIC S3C2410_PA_IIC
#define S3C_PA_UART S3C24XX_PA_UART
#define S3C_PA_USBHOST S3C2410_PA_USBHOST
#define S3C_PA_HSMMC0 S3C2443_PA_HSMMC
+#define S3C_PA_HSMMC1 S3C2416_PA_HSMMC0
#define S3C_PA_NAND S3C24XX_PA_NAND
#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-clock.h
index 9a0d169..3415b60 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-clock.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-clock.h
@@ -161,4 +161,6 @@
#endif /* CONFIG_CPU_S3C2412 | CONFIG_CPU_S3C2413 */
+#define S3C2416_CLKDIV2 S3C2410_CLKREG(0x28)
+
#endif /* __ASM_ARM_REGS_CLOCK */
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-dsc.h b/arch/arm/mach-s3c2410/include/mach/regs-dsc.h
index 3c3853c..98fd4a0 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-dsc.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-dsc.h
@@ -19,6 +19,42 @@
#define S3C2412_DSC1 S3C2410_GPIOREG(0xe0)
#endif
+#if defined(CONFIG_CPU_S3C2416)
+#define S3C2416_DSC0 S3C2410_GPIOREG(0xc0)
+#define S3C2416_DSC1 S3C2410_GPIOREG(0xc4)
+#define S3C2416_DSC2 S3C2410_GPIOREG(0xc8)
+#define S3C2416_DSC3 S3C2410_GPIOREG(0x110)
+
+#define S3C2416_SELECT_DSC0 (0 << 30)
+#define S3C2416_SELECT_DSC1 (1 << 30)
+#define S3C2416_SELECT_DSC2 (2 << 30)
+#define S3C2416_SELECT_DSC3 (3 << 30)
+
+#define S3C2416_DSC_GETSHIFT(x) (x & 30)
+
+#define S3C2416_DSC0_CF (S3C2416_SELECT_DSC0 | 28)
+#define S3C2416_DSC0_CF_5mA (0 << 28)
+#define S3C2416_DSC0_CF_10mA (1 << 28)
+#define S3C2416_DSC0_CF_15mA (2 << 28)
+#define S3C2416_DSC0_CF_21mA (3 << 28)
+#define S3C2416_DSC0_CF_MASK (3 << 28)
+
+#define S3C2416_DSC0_nRBE (S3C2416_SELECT_DSC0 | 26)
+#define S3C2416_DSC0_nRBE_5mA (0 << 26)
+#define S3C2416_DSC0_nRBE_10mA (1 << 26)
+#define S3C2416_DSC0_nRBE_15mA (2 << 26)
+#define S3C2416_DSC0_nRBE_21mA (3 << 26)
+#define S3C2416_DSC0_nRBE_MASK (3 << 26)
+
+#define S3C2416_DSC0_nROE (S3C2416_SELECT_DSC0 | 24)
+#define S3C2416_DSC0_nROE_5mA (0 << 24)
+#define S3C2416_DSC0_nROE_10mA (1 << 24)
+#define S3C2416_DSC0_nROE_15mA (2 << 24)
+#define S3C2416_DSC0_nROE_21mA (3 << 24)
+#define S3C2416_DSC0_nROE_MASK (3 << 24)
+
+#endif
+
#if defined(CONFIG_CPU_S3C244X)
#define S3C2440_DSC0 S3C2410_GPIOREG(0xc4)
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
index 95e29fe..a0a89d4 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
@@ -592,29 +592,50 @@
#define S3C2410_GPHUP S3C2410_GPIOREG(0x78)
#define S3C2410_GPH0_nCTS0 (0x02 << 0)
+#define S3C2416_GPH0_TXD0 (0x02 << 0)
#define S3C2410_GPH1_nRTS0 (0x02 << 2)
+#define S3C2416_GPH1_RXD0 (0x02 << 2)
#define S3C2410_GPH2_TXD0 (0x02 << 4)
+#define S3C2416_GPH2_TXD1 (0x02 << 4)
#define S3C2410_GPH3_RXD0 (0x02 << 6)
+#define S3C2416_GPH3_RXD1 (0x02 << 6)
#define S3C2410_GPH4_TXD1 (0x02 << 8)
+#define S3C2416_GPH4_TXD2 (0x02 << 8)
#define S3C2410_GPH5_RXD1 (0x02 << 10)
+#define S3C2416_GPH5_RXD2 (0x02 << 10)
#define S3C2410_GPH6_TXD2 (0x02 << 12)
+#define S3C2416_GPH6_TXD3 (0x02 << 12)
#define S3C2410_GPH6_nRTS1 (0x03 << 12)
+#define S3C2416_GPH6_nRTS2 (0x03 << 12)
#define S3C2410_GPH7_RXD2 (0x02 << 14)
+#define S3C2416_GPH7_RXD3 (0x02 << 14)
#define S3C2410_GPH7_nCTS1 (0x03 << 14)
+#define S3C2416_GPH7_nCTS2 (0x03 << 14)
#define S3C2410_GPH8_UCLK (0x02 << 16)
+#define S3C2416_GPH8_nCTS0 (0x02 << 16)
#define S3C2410_GPH9_CLKOUT0 (0x02 << 18)
#define S3C2442_GPH9_nSPICS0 (0x03 << 18)
+#define S3C2416_GPH9_nRTS0 (0x02 << 18)
#define S3C2410_GPH10_CLKOUT1 (0x02 << 20)
+#define S3C2416_GPH10_nCTS1 (0x02 << 20)
+
+#define S3C2416_GPH11_nRTS1 (0x02 << 22)
+
+#define S3C2416_GPH12_EXTUARTCLK (0x02 << 24)
+
+#define S3C2416_GPH13_CLKOUT0 (0x02 << 26)
+
+#define S3C2416_GPH14_CLKOUT1 (0x02 << 28)
/* The S3C2412 and S3C2413 move the GPJ register set to after
* GPH, which means all registers after 0x80 are now offset by 0x10
@@ -685,6 +706,7 @@
#define S3C2412_MISCCR_CLK1_CLKsrc (0<<8)
#define S3C2410_MISCCR_USBSUSPND0 (1<<12)
+#define S3C2416_MISCCR_SEL_SUSPND (1<<12)
#define S3C2410_MISCCR_USBSUSPND1 (1<<13)
#define S3C2410_MISCCR_nRSTCON (1<<16)
@@ -694,6 +716,9 @@
#define S3C2410_MISCCR_nEN_SCLKE (1<<19) /* not 2412 */
#define S3C2410_MISCCR_SDSLEEP (7<<17)
+#define S3C2416_MISCCR_FLT_I2C (1<<24)
+#define S3C2416_MISCCR_HSSPI_EN2 (1<<31)
+
/* external interrupt control... */
/* S3C2410_EXTINT0 -> irq sense control for EINT0..EINT7
* S3C2410_EXTINT1 -> irq sense control for EINT8..EINT15
@@ -761,8 +786,11 @@
#define S3C2410_GSTATUS1_IDMASK (0xffff0000)
#define S3C2410_GSTATUS1_2410 (0x32410000)
#define S3C2410_GSTATUS1_2412 (0x32412001)
+#define S3C2410_GSTATUS1_2416 (0x32416003)
#define S3C2410_GSTATUS1_2440 (0x32440000)
#define S3C2410_GSTATUS1_2442 (0x32440aaa)
+/* some 2416 CPUs report this value also */
+#define S3C2410_GSTATUS1_2450 (0x32450003)
#define S3C2410_GSTATUS2_WTRESET (1<<2)
#define S3C2410_GSTATUS2_OFFRESET (1<<1)
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-irq.h b/arch/arm/mach-s3c2410/include/mach/regs-irq.h
index de86ee8..0f07ba3 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-irq.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-irq.h
@@ -27,6 +27,16 @@
#define S3C2410_SUBSRCPND S3C2410_IRQREG(0x018)
#define S3C2410_INTSUBMSK S3C2410_IRQREG(0x01C)
+#define S3C2416_PRIORITY_MODE1 S3C2410_IRQREG(0x030)
+#define S3C2416_PRIORITY_UPDATE1 S3C2410_IRQREG(0x034)
+#define S3C2416_SRCPND2 S3C2410_IRQREG(0x040)
+#define S3C2416_INTMOD2 S3C2410_IRQREG(0x044)
+#define S3C2416_INTMSK2 S3C2410_IRQREG(0x048)
+#define S3C2416_INTPND2 S3C2410_IRQREG(0x050)
+#define S3C2416_INTOFFSET2 S3C2410_IRQREG(0x054)
+#define S3C2416_PRIORITY_MODE2 S3C2410_IRQREG(0x070)
+#define S3C2416_PRIORITY_UPDATE2 S3C2410_IRQREG(0x074)
+
/* mask: 0=enable, 1=disable
* 1 bit EINT, 4=EINT4, 23=EINT23
* EINT0,1,2,3 are not handled here.
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2416-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2416-mem.h
new file mode 100644
index 0000000..2f31b74
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2416-mem.h
@@ -0,0 +1,30 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-s3c2416-mem.h
+ *
+ * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>,
+ * as part of OpenInkpot project
+ * Copyright (c) 2009 Promwad Innovation Company
+ * Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2416 memory register definitions
+*/
+
+#ifndef __ASM_ARM_REGS_S3C2416_MEM
+#define __ASM_ARM_REGS_S3C2416_MEM
+
+#ifndef S3C2416_MEMREG
+#define S3C2416_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
+#endif
+
+#define S3C2416_BANKCFG S3C2416_MEMREG(0x00)
+#define S3C2416_BANKCON1 S3C2416_MEMREG(0x04)
+#define S3C2416_BANKCON2 S3C2416_MEMREG(0x08)
+#define S3C2416_BANKCON3 S3C2416_MEMREG(0x0C)
+
+#define S3C2416_REFRESH S3C2416_MEMREG(0x10)
+#define S3C2416_TIMEOUT S3C2416_MEMREG(0x14)
+
+#endif /* __ASM_ARM_REGS_S3C2416_MEM */
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2416.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2416.h
new file mode 100644
index 0000000..e443167
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2416.h
@@ -0,0 +1,24 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-s3c2416.h
+ *
+ * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>,
+ * as part of OpenInkpot project
+ * Copyright (c) 2009 Promwad Innovation Company
+ * Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2416 specific register definitions
+*/
+
+#ifndef __ASM_ARCH_REGS_S3C2416_H
+#define __ASM_ARCH_REGS_S3C2416_H "s3c2416"
+
+#define S3C2416_SWRST (S3C24XX_VA_CLKPWR + 0x44)
+#define S3C2416_SWRST_RESET (0x533C2416)
+
+/* see regs-power.h for the other registers in the power block. */
+
+#endif /* __ASM_ARCH_REGS_S3C2416_H */
+
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
index d87ebe0..08ab9df 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
@@ -83,8 +83,7 @@
#define S3C2443_HCLKCON_DMA4 (1<<4)
#define S3C2443_HCLKCON_DMA5 (1<<5)
#define S3C2443_HCLKCON_CAMIF (1<<8)
-#define S3C2443_HCLKCON_DISP (1<<9)
-#define S3C2443_HCLKCON_LCDC (1<<10)
+#define S3C2443_HCLKCON_LCDC (1<<9)
#define S3C2443_HCLKCON_USBH (1<<11)
#define S3C2443_HCLKCON_USBD (1<<12)
#define S3C2443_HCLKCON_HSMMC (1<<16)
diff --git a/arch/arm/mach-s3c2410/include/mach/uncompress.h b/arch/arm/mach-s3c2410/include/mach/uncompress.h
index 72f756c..8b283f8 100644
--- a/arch/arm/mach-s3c2410/include/mach/uncompress.h
+++ b/arch/arm/mach-s3c2410/include/mach/uncompress.h
@@ -40,7 +40,9 @@ static void arch_detect_cpu(void)
cpuid &= S3C2410_GSTATUS1_IDMASK;
if (is_arm926() || cpuid == S3C2410_GSTATUS1_2440 ||
- cpuid == S3C2410_GSTATUS1_2442) {
+ cpuid == S3C2410_GSTATUS1_2442 ||
+ cpuid == S3C2410_GSTATUS1_2416 ||
+ cpuid == S3C2410_GSTATUS1_2450) {
fifo_mask = S3C2440_UFSTAT_TXMASK;
fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT;
} else {
diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
index 9a8c065..cef6a65 100644
--- a/arch/arm/mach-s3c2412/Kconfig
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -16,7 +16,8 @@ config CPU_S3C2412
config CPU_S3C2412_ONLY
bool
depends on ARCH_S3C2410 && !CPU_S3C2400 && !CPU_S3C2410 && \
- !CPU_S3C2440 && !CPU_S3C2442 && !CPU_S3C2443 && CPU_S3C2412
+ !CPU_2416 && !CPU_S3C2440 && !CPU_S3C2442 && \
+ !CPU_S3C2443 && CPU_S3C2412
default y if CPU_S3C2412
config S3C2412_DMA
diff --git a/arch/arm/mach-s3c2416/Kconfig b/arch/arm/mach-s3c2416/Kconfig
new file mode 100644
index 0000000..657e4fe
--- /dev/null
+++ b/arch/arm/mach-s3c2416/Kconfig
@@ -0,0 +1,39 @@
+# arch/arm/mach-s3c2416/Kconfig
+#
+# Copyright 2009 Yauhen Kharuzhy <jekhor@gmail.com>
+#
+# Licensed under GPLv2
+
+# note, this also supports the S3C2450 which is so similar it has the same
+# ID code as the S3C2416.
+
+config CPU_S3C2416
+ bool
+ depends on ARCH_S3C2410
+ select CPU_ARM926T
+ select S3C2416_DMA if S3C2410_DMA
+ select CPU_LLSERIAL_S3C2440
+ select S3C_GPIO_PULL_UPDOWN
+ select SAMSUNG_CLKSRC
+ select S3C2443_CLOCK
+ help
+ Support for the S3C2416 SoC from the S3C24XX line
+
+config S3C2416_DMA
+ bool
+ depends on CPU_S3C2416
+ help
+ Internal config node for S3C2416 DMA support
+
+menu "S3C2416 Machines"
+
+config MACH_SMDK2416
+ bool "SMDK2416"
+ select CPU_S3C2416
+ select S3C_DEV_FB
+ select S3C_DEV_HSMMC
+ select S3C_DEV_HSMMC1
+ help
+ Say Y here if you are using an SMDK2416
+
+endmenu
diff --git a/arch/arm/mach-s3c2416/Makefile b/arch/arm/mach-s3c2416/Makefile
new file mode 100644
index 0000000..6c12c7b
--- /dev/null
+++ b/arch/arm/mach-s3c2416/Makefile
@@ -0,0 +1,19 @@
+# arch/arm/mach-s3c2416/Makefile
+#
+# Copyright 2009 Yauhen Kharuzhy <jekhor@gmail.com>
+#
+# Licensed under GPLv2
+
+obj-y :=
+obj-m :=
+obj-n :=
+obj- :=
+
+obj-$(CONFIG_CPU_S3C2416) += s3c2416.o clock.o
+obj-$(CONFIG_CPU_S3C2416) += irq.o
+
+#obj-$(CONFIG_S3C2416_DMA) += dma.o
+
+# Machine support
+
+obj-$(CONFIG_MACH_SMDK2416) += mach-smdk2416.o
diff --git a/arch/arm/mach-s3c2416/clock.c b/arch/arm/mach-s3c2416/clock.c
new file mode 100644
index 0000000..7ccf5a2
--- /dev/null
+++ b/arch/arm/mach-s3c2416/clock.c
@@ -0,0 +1,135 @@
+/* linux/arch/arm/mach-s3c2416/clock.c
+ *
+ * Copyright (c) 2010 Simtec Electronics
+ * Copyright (c) 2010 Ben Dooks <ben-linux@fluff.org>
+ *
+ * S3C2416 Clock control support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/clk.h>
+
+#include <plat/s3c2416.h>
+#include <plat/s3c2443.h>
+#include <plat/clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/cpu.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/pll6553x.h>
+#include <plat/pll.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/regs-clock.h>
+#include <mach/regs-s3c2443-clock.h>
+
+static unsigned int armdiv[8] = {
+ [0] = 1,
+ [1] = 2,
+ [2] = 3,
+ [3] = 4,
+ [5] = 6,
+ [7] = 8,
+};
+
+/* ID to hardware numbering, 0 is HSMMC1, 1 is HSMMC0 */
+static struct clksrc_clk hsmmc_div[] = {
+ [0] = {
+ .clk = {
+ .name = "hsmmc-div",
+ .id = 1,
+ .parent = &clk_esysclk.clk,
+ },
+ .reg_div = { .reg = S3C2416_CLKDIV2, .size = 2, .shift = 6 },
+ },
+ [1] = {
+ .clk = {
+ .name = "hsmmc-div",
+ .id = 0,
+ .parent = &clk_esysclk.clk,
+ },
+ .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 6 },
+ },
+};
+
+static struct clksrc_clk hsmmc_mux[] = {
+ [0] = {
+ .clk = {
+ .id = 1,
+ .name = "hsmmc-if",
+ .ctrlbit = (1 << 6),
+ .enable = s3c2443_clkcon_enable_s,
+ },
+ .sources = &(struct clksrc_sources) {
+ .nr_sources = 2,
+ .sources = (struct clk *[]) {
+ [0] = &hsmmc_div[0].clk,
+ [1] = NULL, /* to fix */
+ },
+ },
+ .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 16 },
+ },
+ [1] = {
+ .clk = {
+ .id = 0,
+ .name = "hsmmc-if",
+ .ctrlbit = (1 << 12),
+ .enable = s3c2443_clkcon_enable_s,
+ },
+ .sources = &(struct clksrc_sources) {
+ .nr_sources = 2,
+ .sources = (struct clk *[]) {
+ [0] = &hsmmc_div[1].clk,
+ [1] = NULL, /* to fix */
+ },
+ },
+ .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 17 },
+ },
+};
+
+
+static inline unsigned int s3c2416_fclk_div(unsigned long clkcon0)
+{
+ clkcon0 &= 7 << S3C2443_CLKDIV0_ARMDIV_SHIFT;
+
+ return armdiv[clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT];
+}
+
+void __init_or_cpufreq s3c2416_setup_clocks(void)
+{
+ s3c2443_common_setup_clocks(s3c2416_get_pll, s3c2416_fclk_div);
+}
+
+
+static struct clksrc_clk *clksrcs[] __initdata = {
+ &hsmmc_div[0],
+ &hsmmc_div[1],
+ &hsmmc_mux[0],
+ &hsmmc_mux[1],
+};
+
+void __init s3c2416_init_clocks(int xtal)
+{
+ u32 epllcon = __raw_readl(S3C2443_EPLLCON);
+ u32 epllcon1 = __raw_readl(S3C2443_EPLLCON+4);
+ int ptr;
+
+ /* s3c2416 EPLL compatible with s3c64xx */
+ clk_epll.rate = s3c_get_pll6553x(xtal, epllcon, epllcon1);
+
+ clk_epll.parent = &clk_epllref.clk;
+
+ s3c2443_common_init_clocks(xtal, s3c2416_get_pll, s3c2416_fclk_div);
+
+ for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
+ s3c_register_clksrc(clksrcs[ptr], 1);
+
+ s3c_pwmclk_init();
+
+}
diff --git a/arch/arm/mach-s3c2416/irq.c b/arch/arm/mach-s3c2416/irq.c
new file mode 100644
index 0000000..89f521d
--- /dev/null
+++ b/arch/arm/mach-s3c2416/irq.c
@@ -0,0 +1,254 @@
+/* linux/arch/arm/mach-s3c2416/irq.c
+ *
+ * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>,
+ * as part of OpenInkpot project
+ * Copyright (c) 2009 Promwad Innovation Company
+ * Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/sysdev.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <asm/mach/irq.h>
+
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
+
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <plat/irq.h>
+
+#define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1)
+
+static inline void s3c2416_irq_demux(unsigned int irq, unsigned int len)
+{
+ unsigned int subsrc, submsk;
+ unsigned int end;
+
+ /* read the current pending interrupts, and the mask
+ * for what it is available */
+
+ subsrc = __raw_readl(S3C2410_SUBSRCPND);
+ submsk = __raw_readl(S3C2410_INTSUBMSK);
+
+ subsrc &= ~submsk;
+ subsrc >>= (irq - S3C2410_IRQSUB(0));
+ subsrc &= (1 << len)-1;
+
+ end = len + irq;
+
+ for (; irq < end && subsrc; irq++) {
+ if (subsrc & 1)
+ generic_handle_irq(irq);
+
+ subsrc >>= 1;
+ }
+}
+
+/* WDT/AC97 sub interrupts */
+
+static void s3c2416_irq_demux_wdtac97(unsigned int irq, struct irq_desc *desc)
+{
+ s3c2416_irq_demux(IRQ_S3C2443_WDT, 4);
+}
+
+#define INTMSK_WDTAC97 (1UL << (IRQ_WDT - IRQ_EINT0))
+#define SUBMSK_WDTAC97 INTMSK(IRQ_S3C2443_WDT, IRQ_S3C2443_AC97)
+
+static void s3c2416_irq_wdtac97_mask(unsigned int irqno)
+{
+ s3c_irqsub_mask(irqno, INTMSK_WDTAC97, SUBMSK_WDTAC97);
+}
+
+static void s3c2416_irq_wdtac97_unmask(unsigned int irqno)
+{
+ s3c_irqsub_unmask(irqno, INTMSK_WDTAC97);
+}
+
+static void s3c2416_irq_wdtac97_ack(unsigned int irqno)
+{
+ s3c_irqsub_maskack(irqno, INTMSK_WDTAC97, SUBMSK_WDTAC97);
+}
+
+static struct irq_chip s3c2416_irq_wdtac97 = {
+ .mask = s3c2416_irq_wdtac97_mask,
+ .unmask = s3c2416_irq_wdtac97_unmask,
+ .ack = s3c2416_irq_wdtac97_ack,
+};
+
+
+/* LCD sub interrupts */
+
+static void s3c2416_irq_demux_lcd(unsigned int irq, struct irq_desc *desc)
+{
+ s3c2416_irq_demux(IRQ_S3C2443_LCD1, 4);
+}
+
+#define INTMSK_LCD (1UL << (IRQ_LCD - IRQ_EINT0))
+#define SUBMSK_LCD INTMSK(IRQ_S3C2443_LCD1, IRQ_S3C2443_LCD4)
+
+static void s3c2416_irq_lcd_mask(unsigned int irqno)
+{
+ s3c_irqsub_mask(irqno, INTMSK_LCD, SUBMSK_LCD);
+}
+
+static void s3c2416_irq_lcd_unmask(unsigned int irqno)
+{
+ s3c_irqsub_unmask(irqno, INTMSK_LCD);
+}
+
+static void s3c2416_irq_lcd_ack(unsigned int irqno)
+{
+ s3c_irqsub_maskack(irqno, INTMSK_LCD, SUBMSK_LCD);
+}
+
+static struct irq_chip s3c2416_irq_lcd = {
+ .mask = s3c2416_irq_lcd_mask,
+ .unmask = s3c2416_irq_lcd_unmask,
+ .ack = s3c2416_irq_lcd_ack,
+};
+
+
+/* DMA sub interrupts */
+
+static void s3c2416_irq_demux_dma(unsigned int irq, struct irq_desc *desc)
+{
+ s3c2416_irq_demux(IRQ_S3C2443_DMA0, 6);
+}
+
+#define INTMSK_DMA (1UL << (IRQ_S3C2443_DMA - IRQ_EINT0))
+#define SUBMSK_DMA INTMSK(IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5)
+
+
+static void s3c2416_irq_dma_mask(unsigned int irqno)
+{
+ s3c_irqsub_mask(irqno, INTMSK_DMA, SUBMSK_DMA);
+}
+
+static void s3c2416_irq_dma_unmask(unsigned int irqno)
+{
+ s3c_irqsub_unmask(irqno, INTMSK_DMA);
+}
+
+static void s3c2416_irq_dma_ack(unsigned int irqno)
+{
+ s3c_irqsub_maskack(irqno, INTMSK_DMA, SUBMSK_DMA);
+}
+
+static struct irq_chip s3c2416_irq_dma = {
+ .mask = s3c2416_irq_dma_mask,
+ .unmask = s3c2416_irq_dma_unmask,
+ .ack = s3c2416_irq_dma_ack,
+};
+
+
+/* UART3 sub interrupts */
+
+static void s3c2416_irq_demux_uart3(unsigned int irq, struct irq_desc *desc)
+{
+ s3c2416_irq_demux(IRQ_S3C2443_UART3, 3);
+}
+
+#define INTMSK_UART3 (1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0))
+#define SUBMSK_UART3 (0xf << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
+
+
+static void s3c2416_irq_uart3_mask(unsigned int irqno)
+{
+ s3c_irqsub_mask(irqno, INTMSK_UART3, SUBMSK_UART3);
+}
+
+static void s3c2416_irq_uart3_unmask(unsigned int irqno)
+{
+ s3c_irqsub_unmask(irqno, INTMSK_UART3);
+}
+
+static void s3c2416_irq_uart3_ack(unsigned int irqno)
+{
+ s3c_irqsub_maskack(irqno, INTMSK_UART3, SUBMSK_UART3);
+}
+
+static struct irq_chip s3c2416_irq_uart3 = {
+ .mask = s3c2416_irq_uart3_mask,
+ .unmask = s3c2416_irq_uart3_unmask,
+ .ack = s3c2416_irq_uart3_ack,
+};
+
+
+/* IRQ initialisation code */
+
+static int __init s3c2416_add_sub(unsigned int base,
+ void (*demux)(unsigned int,
+ struct irq_desc *),
+ struct irq_chip *chip,
+ unsigned int start, unsigned int end)
+{
+ unsigned int irqno;
+
+ set_irq_chip(base, &s3c_irq_level_chip);
+ set_irq_handler(base, handle_level_irq);
+ set_irq_chained_handler(base, demux);
+
+ for (irqno = start; irqno <= end; irqno++) {
+ set_irq_chip(irqno, chip);
+ set_irq_handler(irqno, handle_level_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
+
+ return 0;
+}
+
+static int __init s3c2416_irq_add(struct sys_device *sysdev)
+{
+ printk(KERN_INFO "S3C2416: IRQ Support\n");
+
+ s3c2416_add_sub(IRQ_LCD, s3c2416_irq_demux_lcd, &s3c2416_irq_lcd,
+ IRQ_S3C2443_LCD2, IRQ_S3C2443_LCD4);
+
+ s3c2416_add_sub(IRQ_S3C2443_DMA, s3c2416_irq_demux_dma,
+ &s3c2416_irq_dma, IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5);
+
+ s3c2416_add_sub(IRQ_S3C2443_UART3, s3c2416_irq_demux_uart3,
+ &s3c2416_irq_uart3,
+ IRQ_S3C2443_RX3, IRQ_S3C2443_ERR3);
+
+ s3c2416_add_sub(IRQ_WDT, s3c2416_irq_demux_wdtac97,
+ &s3c2416_irq_wdtac97,
+ IRQ_S3C2443_WDT, IRQ_S3C2443_AC97);
+
+ return 0;
+}
+
+static struct sysdev_driver s3c2416_irq_driver = {
+ .add = s3c2416_irq_add,
+};
+
+static int __init s3c2416_irq_init(void)
+{
+ return sysdev_driver_register(&s3c2416_sysclass, &s3c2416_irq_driver);
+}
+
+arch_initcall(s3c2416_irq_init);
+
diff --git a/arch/arm/mach-s3c2416/mach-smdk2416.c b/arch/arm/mach-s3c2416/mach-smdk2416.c
new file mode 100644
index 0000000..5fc3f67
--- /dev/null
+++ b/arch/arm/mach-s3c2416/mach-smdk2416.c
@@ -0,0 +1,206 @@
+/* linux/arch/arm/mach-s3c2416/mach-hanlin_v3c.c
+ *
+ * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>,
+ * as part of OpenInkpot project
+ * Copyright (c) 2009 Promwad Innovation Company
+ * Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/mtd/partitions.h>
+#include <linux/gpio.h>
+#include <linux/fb.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
+
+#include <mach/idle.h>
+#include <mach/leds-gpio.h>
+#include <plat/iic.h>
+
+#include <plat/s3c2416.h>
+#include <plat/gpio-cfg.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/nand.h>
+
+#include <plat/regs-fb-v4.h>
+#include <plat/fb.h>
+
+#include <plat/common-smdk.h>
+
+static struct map_desc smdk2416_iodesc[] __initdata = {
+ /* ISA IO Space map (memory space selected by A24) */
+
+ {
+ .virtual = (u32)S3C24XX_VA_ISA_WORD,
+ .pfn = __phys_to_pfn(S3C2410_CS2),
+ .length = 0x10000,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)S3C24XX_VA_ISA_WORD + 0x10000,
+ .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)),
+ .length = SZ_4M,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)S3C24XX_VA_ISA_BYTE,
+ .pfn = __phys_to_pfn(S3C2410_CS2),
+ .length = 0x10000,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)S3C24XX_VA_ISA_BYTE + 0x10000,
+ .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)),
+ .length = SZ_4M,
+ .type = MT_DEVICE,
+ }
+};
+
+#define UCON (S3C2410_UCON_DEFAULT | \
+ S3C2440_UCON_PCLK | \
+ S3C2443_UCON_RXERR_IRQEN)
+
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
+
+#define UFCON (S3C2410_UFCON_RXTRIG8 | \
+ S3C2410_UFCON_FIFOMODE | \
+ S3C2440_UFCON_TXTRIG16)
+
+static struct s3c2410_uartcfg smdk2416_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ /* IR port */
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON | 0x50,
+ .ufcon = UFCON,
+ }
+};
+
+struct s3c_fb_pd_win smdk2416_fb_win[] = {
+ [0] = {
+ /* think this is the same as the smdk6410 */
+ .win_mode = {
+ .pixclock = 41094,
+ .left_margin = 8,
+ .right_margin = 13,
+ .upper_margin = 7,
+ .lower_margin = 5,
+ .hsync_len = 3,
+ .vsync_len = 1,
+ .xres = 800,
+ .yres = 480,
+ },
+ .default_bpp = 16,
+ .max_bpp = 32,
+ },
+};
+
+static void s3c2416_fb_gpio_setup_24bpp(void)
+{
+ unsigned int gpio;
+
+ for (gpio = S3C2410_GPC(1); gpio <= S3C2410_GPC(4); gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ }
+
+ for (gpio = S3C2410_GPC(8); gpio <= S3C2410_GPC(15); gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ }
+
+ for (gpio = S3C2410_GPD(0); gpio <= S3C2410_GPD(15); gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ }
+}
+
+static struct s3c_fb_platdata smdk2416_fb_platdata = {
+ .win[0] = &smdk2416_fb_win[0],
+ .setup_gpio = s3c2416_fb_gpio_setup_24bpp,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+};
+
+static struct platform_device *smdk2416_devices[] __initdata = {
+ &s3c_device_fb,
+ &s3c_device_wdt,
+ &s3c_device_ohci,
+ &s3c_device_i2c0,
+ &s3c_device_hsmmc0,
+ &s3c_device_hsmmc1,
+};
+
+static void __init smdk2416_map_io(void)
+{
+ s3c24xx_init_io(smdk2416_iodesc, ARRAY_SIZE(smdk2416_iodesc));
+ s3c24xx_init_clocks(12000000);
+ s3c24xx_init_uarts(smdk2416_uartcfgs, ARRAY_SIZE(smdk2416_uartcfgs));
+}
+
+static void __init smdk2416_machine_init(void)
+{
+ s3c_i2c0_set_platdata(NULL);
+ s3c_fb_set_platdata(&smdk2416_fb_platdata);
+
+ gpio_request(S3C2410_GPB(4), "USBHost Power");
+ gpio_direction_output(S3C2410_GPB(4), 1);
+
+ gpio_request(S3C2410_GPB(3), "Display Power");
+ gpio_direction_output(S3C2410_GPB(3), 1);
+
+ gpio_request(S3C2410_GPB(1), "Display Reset");
+ gpio_direction_output(S3C2410_GPB(1), 1);
+
+ platform_add_devices(smdk2416_devices, ARRAY_SIZE(smdk2416_devices));
+ smdk_machine_init();
+}
+
+MACHINE_START(SMDK2416, "SMDK2416")
+ /* Maintainer: Yauhen Kharuzhy <jekhor@gmail.com> */
+ .phys_io = S3C2410_PA_UART,
+ .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+ .boot_params = S3C2410_SDRAM_PA + 0x100,
+
+ .init_irq = s3c24xx_init_irq,
+ .map_io = smdk2416_map_io,
+ .init_machine = smdk2416_machine_init,
+ .timer = &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c2416/s3c2416.c b/arch/arm/mach-s3c2416/s3c2416.c
new file mode 100644
index 0000000..35dabcc
--- /dev/null
+++ b/arch/arm/mach-s3c2416/s3c2416.c
@@ -0,0 +1,130 @@
+/* linux/arch/arm/mach-s3c2416/s3c2416.c
+ *
+ * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>,
+ * as part of OpenInkpot project
+ * Copyright (c) 2009 Promwad Innovation Company
+ * Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
+ *
+ * Samsung S3C2416 Mobile CPU support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/sysdev.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <asm/proc-fns.h>
+#include <asm/irq.h>
+
+#include <mach/reset.h>
+#include <mach/idle.h>
+#include <mach/regs-s3c2443-clock.h>
+
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+#include <plat/s3c2416.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#include <plat/iic-core.h>
+
+static struct map_desc s3c2416_iodesc[] __initdata = {
+ IODESC_ENT(WATCHDOG),
+ IODESC_ENT(CLKPWR),
+ IODESC_ENT(TIMER),
+};
+
+struct sysdev_class s3c2416_sysclass = {
+ .name = "s3c2416-core",
+};
+
+static struct sys_device s3c2416_sysdev = {
+ .cls = &s3c2416_sysclass,
+};
+
+static void s3c2416_hard_reset(void)
+{
+ __raw_writel(S3C2443_SWRST_RESET, S3C2443_SWRST);
+}
+
+int __init s3c2416_init(void)
+{
+ printk(KERN_INFO "S3C2416: Initializing architecture\n");
+
+ s3c24xx_reset_hook = s3c2416_hard_reset;
+ /* s3c24xx_idle = s3c2416_idle; */
+
+ /* change WDT IRQ number */
+ s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT;
+ s3c_device_wdt.resource[1].end = IRQ_S3C2443_WDT;
+
+ /* the i2c devices are directly compatible with s3c2440 */
+ s3c_i2c0_setname("s3c2440-i2c");
+ s3c_i2c1_setname("s3c2440-i2c");
+
+ s3c_device_fb.name = "s3c2443-fb";
+
+ return sysdev_register(&s3c2416_sysdev);
+}
+
+void __init s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+ s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no);
+
+ s3c_device_nand.name = "s3c2416-nand";
+}
+
+/* s3c2416_map_io
+ *
+ * register the standard cpu IO areas, and any passed in from the
+ * machine specific initialisation.
+ */
+
+void __init s3c2416_map_io(void)
+{
+ s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_updown;
+ s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_updown;
+
+ iotable_init(s3c2416_iodesc, ARRAY_SIZE(s3c2416_iodesc));
+}
+
+/* need to register class before we actually register the device, and
+ * we also need to ensure that it has been initialised before any of the
+ * drivers even try to use it (even if not on an s3c2416 based system)
+ * as a driver which may support both 2443 and 2440 may try and use it.
+*/
+
+static int __init s3c2416_core_init(void)
+{
+ return sysdev_class_register(&s3c2416_sysclass);
+}
+
+core_initcall(s3c2416_core_init);
diff --git a/arch/arm/mach-s3c2443/Kconfig b/arch/arm/mach-s3c2443/Kconfig
index 698140a..4fef723 100644
--- a/arch/arm/mach-s3c2443/Kconfig
+++ b/arch/arm/mach-s3c2443/Kconfig
@@ -8,6 +8,7 @@ config CPU_S3C2443
select S3C2443_DMA if S3C2410_DMA
select CPU_LLSERIAL_S3C2440
select SAMSUNG_CLKSRC
+ select S3C2443_CLOCK
help
Support for the S3C2443 SoC from the S3C24XX line
diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c
index 62cd4ea..83b1aa6 100644
--- a/arch/arm/mach-s3c2443/clock.c
+++ b/arch/arm/mach-s3c2443/clock.c
@@ -21,6 +21,7 @@
*/
#include <linux/init.h>
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/list.h>
@@ -54,111 +55,13 @@
* set the correct muxing at initialisation
*/
-static int s3c2443_gate(void __iomem *reg, struct clk *clk, int enable)
-{
- u32 ctrlbit = clk->ctrlbit;
- u32 con = __raw_readl(reg);
-
- if (enable)
- con |= ctrlbit;
- else
- con &= ~ctrlbit;
-
- __raw_writel(con, reg);
- return 0;
-}
-
-static int s3c2443_clkcon_enable_h(struct clk *clk, int enable)
-{
- return s3c2443_gate(S3C2443_HCLKCON, clk, enable);
-}
-
-static int s3c2443_clkcon_enable_p(struct clk *clk, int enable)
-{
- return s3c2443_gate(S3C2443_PCLKCON, clk, enable);
-}
-
-static int s3c2443_clkcon_enable_s(struct clk *clk, int enable)
-{
- return s3c2443_gate(S3C2443_SCLKCON, clk, enable);
-}
-
/* clock selections */
-/* mpllref is a direct descendant of clk_xtal by default, but it is not
- * elided as the EPLL can be either sourced by the XTAL or EXTCLK and as
- * such directly equating the two source clocks is impossible.
- */
-static struct clk clk_mpllref = {
- .name = "mpllref",
- .parent = &clk_xtal,
- .id = -1,
-};
-
static struct clk clk_i2s_ext = {
.name = "i2s-ext",
.id = -1,
};
-static struct clk *clk_epllref_sources[] = {
- [0] = &clk_mpllref,
- [1] = &clk_mpllref,
- [2] = &clk_xtal,
- [3] = &clk_ext,
-};
-
-static struct clksrc_clk clk_epllref = {
- .clk = {
- .name = "epllref",
- .id = -1,
- },
- .sources = &(struct clksrc_sources) {
- .sources = clk_epllref_sources,
- .nr_sources = ARRAY_SIZE(clk_epllref_sources),
- },
- .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 7 },
-};
-
-static unsigned long s3c2443_getrate_mdivclk(struct clk *clk)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long div = __raw_readl(S3C2443_CLKDIV0);
-
- div &= S3C2443_CLKDIV0_EXTDIV_MASK;
- div >>= (S3C2443_CLKDIV0_EXTDIV_SHIFT-1); /* x2 */
-
- return parent_rate / (div + 1);
-}
-
-static struct clk clk_mdivclk = {
- .name = "mdivclk",
- .parent = &clk_mpllref,
- .id = -1,
- .ops = &(struct clk_ops) {
- .get_rate = s3c2443_getrate_mdivclk,
- },
-};
-
-static struct clk *clk_msysclk_sources[] = {
- [0] = &clk_mpllref,
- [1] = &clk_mpll,
- [2] = &clk_mdivclk,
- [3] = &clk_mpllref,
-};
-
-static struct clksrc_clk clk_msysclk = {
- .clk = {
- .name = "msysclk",
- .parent = &clk_xtal,
- .id = -1,
- },
- .sources = &(struct clksrc_sources) {
- .sources = clk_msysclk_sources,
- .nr_sources = ARRAY_SIZE(clk_msysclk_sources),
- },
- .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 3 },
-};
-
/* armdiv
*
* this clock is sourced from msysclk and can have a number of
@@ -266,44 +169,6 @@ static struct clksrc_clk clk_arm = {
.reg_src = { .reg = S3C2443_CLKDIV0, .size = 1, .shift = 13 },
};
-/* esysclk
- *
- * this is sourced from either the EPLL or the EPLLref clock
-*/
-
-static struct clk *clk_sysclk_sources[] = {
- [0] = &clk_epllref.clk,
- [1] = &clk_epll,
-};
-
-static struct clksrc_clk clk_esysclk = {
- .clk = {
- .name = "esysclk",
- .parent = &clk_epll,
- .id = -1,
- },
- .sources = &(struct clksrc_sources) {
- .sources = clk_sysclk_sources,
- .nr_sources = ARRAY_SIZE(clk_sysclk_sources),
- },
- .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 6 },
-};
-
-/* uartclk
- *
- * UART baud-rate clock sourced from esysclk via a divisor
-*/
-
-static struct clksrc_clk clk_uart = {
- .clk = {
- .name = "uartclk",
- .id = -1,
- .parent = &clk_esysclk.clk,
- },
- .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 8 },
-};
-
-
/* hsspi
*
* high-speed spi clock, sourced from esysclk
@@ -320,21 +185,6 @@ static struct clksrc_clk clk_hsspi = {
.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 },
};
-/* usbhost
- *
- * usb host bus-clock, usually 48MHz to provide USB bus clock timing
-*/
-
-static struct clksrc_clk clk_usb_bus_host = {
- .clk = {
- .name = "usb-bus-host-parent",
- .id = -1,
- .parent = &clk_esysclk.clk,
- .ctrlbit = S3C2443_SCLKCON_USBHOST,
- .enable = s3c2443_clkcon_enable_s,
- },
- .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 },
-};
/* clk_hsmcc_div
*
@@ -433,89 +283,16 @@ static struct clksrc_clk clk_i2s = {
.reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 14 },
};
-/* cam-if
- *
- * camera interface bus-clock, divided down from esysclk
-*/
-
-static struct clksrc_clk clk_cam = {
- .clk = {
- .name = "camif-upll", /* same as 2440 name */
- .id = -1,
- .parent = &clk_esysclk.clk,
- .ctrlbit = S3C2443_SCLKCON_CAMCLK,
- .enable = s3c2443_clkcon_enable_s,
- },
- .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 26 },
-};
-
-/* display-if
- *
- * display interface clock, divided from esysclk
-*/
-
-static struct clksrc_clk clk_display = {
- .clk = {
- .name = "display-if",
- .id = -1,
- .parent = &clk_esysclk.clk,
- .ctrlbit = S3C2443_SCLKCON_DISPCLK,
- .enable = s3c2443_clkcon_enable_s,
- },
- .reg_div = { .reg = S3C2443_CLKDIV1, .size = 8, .shift = 16 },
-};
-
-/* prediv
- *
- * this divides the msysclk down to pass to h/p/etc.
- */
-
-static unsigned long s3c2443_prediv_getrate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
-
- clkdiv0 &= S3C2443_CLKDIV0_PREDIV_MASK;
- clkdiv0 >>= S3C2443_CLKDIV0_PREDIV_SHIFT;
-
- return rate / (clkdiv0 + 1);
-}
-
-static struct clk clk_prediv = {
- .name = "prediv",
- .id = -1,
- .parent = &clk_msysclk.clk,
- .ops = &(struct clk_ops) {
- .get_rate = s3c2443_prediv_getrate,
- },
-};
-
/* standard clock definitions */
-static struct clk init_clocks_disable[] = {
+static struct clk init_clocks_off[] = {
{
- .name = "nand",
- .id = -1,
- .parent = &clk_h,
- }, {
.name = "sdi",
.id = -1,
.parent = &clk_p,
.enable = s3c2443_clkcon_enable_p,
.ctrlbit = S3C2443_PCLKCON_SDI,
}, {
- .name = "adc",
- .id = -1,
- .parent = &clk_p,
- .enable = s3c2443_clkcon_enable_p,
- .ctrlbit = S3C2443_PCLKCON_ADC,
- }, {
- .name = "i2c",
- .id = -1,
- .parent = &clk_p,
- .enable = s3c2443_clkcon_enable_p,
- .ctrlbit = S3C2443_PCLKCON_IIC,
- }, {
.name = "iis",
.id = -1,
.parent = &clk_p,
@@ -537,179 +314,12 @@ static struct clk init_clocks_disable[] = {
};
static struct clk init_clocks[] = {
- {
- .name = "dma",
- .id = 0,
- .parent = &clk_h,
- .enable = s3c2443_clkcon_enable_h,
- .ctrlbit = S3C2443_HCLKCON_DMA0,
- }, {
- .name = "dma",
- .id = 1,
- .parent = &clk_h,
- .enable = s3c2443_clkcon_enable_h,
- .ctrlbit = S3C2443_HCLKCON_DMA1,
- }, {
- .name = "dma",
- .id = 2,
- .parent = &clk_h,
- .enable = s3c2443_clkcon_enable_h,
- .ctrlbit = S3C2443_HCLKCON_DMA2,
- }, {
- .name = "dma",
- .id = 3,
- .parent = &clk_h,
- .enable = s3c2443_clkcon_enable_h,
- .ctrlbit = S3C2443_HCLKCON_DMA3,
- }, {
- .name = "dma",
- .id = 4,
- .parent = &clk_h,
- .enable = s3c2443_clkcon_enable_h,
- .ctrlbit = S3C2443_HCLKCON_DMA4,
- }, {
- .name = "dma",
- .id = 5,
- .parent = &clk_h,
- .enable = s3c2443_clkcon_enable_h,
- .ctrlbit = S3C2443_HCLKCON_DMA5,
- }, {
- .name = "lcd",
- .id = -1,
- .parent = &clk_h,
- .enable = s3c2443_clkcon_enable_h,
- .ctrlbit = S3C2443_HCLKCON_LCDC,
- }, {
- .name = "gpio",
- .id = -1,
- .parent = &clk_p,
- .enable = s3c2443_clkcon_enable_p,
- .ctrlbit = S3C2443_PCLKCON_GPIO,
- }, {
- .name = "usb-host",
- .id = -1,
- .parent = &clk_h,
- .enable = s3c2443_clkcon_enable_h,
- .ctrlbit = S3C2443_HCLKCON_USBH,
- }, {
- .name = "usb-device",
- .id = -1,
- .parent = &clk_h,
- .enable = s3c2443_clkcon_enable_h,
- .ctrlbit = S3C2443_HCLKCON_USBD,
- }, {
- .name = "hsmmc",
- .id = -1,
- .parent = &clk_h,
- .enable = s3c2443_clkcon_enable_h,
- .ctrlbit = S3C2443_HCLKCON_HSMMC,
- }, {
- .name = "cfc",
- .id = -1,
- .parent = &clk_h,
- .enable = s3c2443_clkcon_enable_h,
- .ctrlbit = S3C2443_HCLKCON_CFC,
- }, {
- .name = "ssmc",
- .id = -1,
- .parent = &clk_h,
- .enable = s3c2443_clkcon_enable_h,
- .ctrlbit = S3C2443_HCLKCON_SSMC,
- }, {
- .name = "timers",
- .id = -1,
- .parent = &clk_p,
- .enable = s3c2443_clkcon_enable_p,
- .ctrlbit = S3C2443_PCLKCON_PWMT,
- }, {
- .name = "uart",
- .id = 0,
- .parent = &clk_p,
- .enable = s3c2443_clkcon_enable_p,
- .ctrlbit = S3C2443_PCLKCON_UART0,
- }, {
- .name = "uart",
- .id = 1,
- .parent = &clk_p,
- .enable = s3c2443_clkcon_enable_p,
- .ctrlbit = S3C2443_PCLKCON_UART1,
- }, {
- .name = "uart",
- .id = 2,
- .parent = &clk_p,
- .enable = s3c2443_clkcon_enable_p,
- .ctrlbit = S3C2443_PCLKCON_UART2,
- }, {
- .name = "uart",
- .id = 3,
- .parent = &clk_p,
- .enable = s3c2443_clkcon_enable_p,
- .ctrlbit = S3C2443_PCLKCON_UART3,
- }, {
- .name = "rtc",
- .id = -1,
- .parent = &clk_p,
- .enable = s3c2443_clkcon_enable_p,
- .ctrlbit = S3C2443_PCLKCON_RTC,
- }, {
- .name = "watchdog",
- .id = -1,
- .parent = &clk_p,
- .ctrlbit = S3C2443_PCLKCON_WDT,
- }, {
- .name = "usb-bus-host",
- .id = -1,
- .parent = &clk_usb_bus_host.clk,
- }, {
- .name = "ac97",
- .id = -1,
- .parent = &clk_p,
- .ctrlbit = S3C2443_PCLKCON_AC97,
- }
-};
-
-/* clocks to add where we need to check their parentage */
-
-static struct clksrc_clk __initdata *init_list[] = {
- &clk_epllref, /* should be first */
- &clk_esysclk,
- &clk_msysclk,
- &clk_arm,
- &clk_i2s_eplldiv,
- &clk_i2s,
- &clk_cam,
- &clk_uart,
- &clk_display,
- &clk_hsmmc_div,
- &clk_usb_bus_host,
};
-static void __init s3c2443_clk_initparents(void)
-{
- int ptr;
-
- for (ptr = 0; ptr < ARRAY_SIZE(init_list); ptr++)
- s3c_set_clksrc(init_list[ptr], true);
-}
-
-static inline unsigned long s3c2443_get_hdiv(unsigned long clkcon0)
-{
- clkcon0 &= S3C2443_CLKDIV0_HCLKDIV_MASK;
-
- return clkcon0 + 1;
-}
-
/* clocks to add straight away */
static struct clksrc_clk *clksrcs[] __initdata = {
- &clk_usb_bus_host,
- &clk_epllref,
- &clk_esysclk,
- &clk_msysclk,
&clk_arm,
- &clk_uart,
- &clk_display,
- &clk_cam,
&clk_i2s_eplldiv,
&clk_i2s,
&clk_hsspi,
@@ -717,92 +327,32 @@ static struct clksrc_clk *clksrcs[] __initdata = {
};
static struct clk *clks[] __initdata = {
- &clk_ext,
- &clk_epll,
- &clk_usb_bus,
- &clk_mpllref,
&clk_hsmmc,
&clk_armdiv,
- &clk_prediv,
};
void __init_or_cpufreq s3c2443_setup_clocks(void)
{
- unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON);
- unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
- struct clk *xtal_clk;
- unsigned long xtal;
- unsigned long pll;
- unsigned long fclk;
- unsigned long hclk;
- unsigned long pclk;
-
- xtal_clk = clk_get(NULL, "xtal");
- xtal = clk_get_rate(xtal_clk);
- clk_put(xtal_clk);
-
- pll = s3c2443_get_mpll(mpllcon, xtal);
- clk_msysclk.clk.rate = pll;
-
- fclk = pll / s3c2443_fclk_div(clkdiv0);
- hclk = s3c2443_prediv_getrate(&clk_prediv);
- hclk /= s3c2443_get_hdiv(clkdiv0);
- pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1);
-
- s3c24xx_setup_clocks(fclk, hclk, pclk);
-
- printk("S3C2443: mpll %s %ld.%03ld MHz, cpu %ld.%03ld MHz, mem %ld.%03ld MHz, pclk %ld.%03ld MHz\n",
- (mpllcon & S3C2443_PLLCON_OFF) ? "off":"on",
- print_mhz(pll), print_mhz(fclk),
- print_mhz(hclk), print_mhz(pclk));
-
- s3c24xx_setup_clocks(fclk, hclk, pclk);
+ s3c2443_common_setup_clocks(s3c2443_get_mpll, s3c2443_fclk_div);
}
void __init s3c2443_init_clocks(int xtal)
{
- struct clk *clkp;
unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
- int ret;
int ptr;
- /* s3c2443 parents h and p clocks from prediv */
- clk_h.parent = &clk_prediv;
- clk_p.parent = &clk_prediv;
+ clk_epll.rate = s3c2443_get_epll(epllcon, xtal);
+ clk_epll.parent = &clk_epllref.clk;
+
+ s3c2443_common_init_clocks(xtal, s3c2443_get_mpll, s3c2443_fclk_div);
- s3c24xx_register_baseclocks(xtal);
s3c2443_setup_clocks();
- s3c2443_clk_initparents();
-
- for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
- clkp = clks[ptr];
- ret = s3c24xx_register_clock(clkp);
- if (ret < 0) {
- printk(KERN_ERR "Failed to register clock %s (%d)\n",
- clkp->name, ret);
- }
- }
+ s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
s3c_register_clksrc(clksrcs[ptr], 1);
- clk_epll.rate = s3c2443_get_epll(epllcon, xtal);
- clk_epll.parent = &clk_epllref.clk;
- clk_usb_bus.parent = &clk_usb_bus_host.clk;
-
- /* ensure usb bus clock is within correct rate of 48MHz */
-
- if (clk_get_rate(&clk_usb_bus_host.clk) != (48 * 1000 * 1000)) {
- printk(KERN_INFO "Warning: USB host bus not at 48MHz\n");
- clk_set_rate(&clk_usb_bus_host.clk, 48*1000*1000);
- }
-
- printk("S3C2443: epll %s %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n",
- (epllcon & S3C2443_PLLCON_OFF) ? "off":"on",
- print_mhz(clk_get_rate(&clk_epll)),
- print_mhz(clk_get_rate(&clk_usb_bus)));
-
/* register clocks from clock array */
s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
@@ -819,17 +369,8 @@ void __init s3c2443_init_clocks(int xtal)
/* install (and disable) the clocks we do not need immediately */
- clkp = init_clocks_disable;
- for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
-
- ret = s3c24xx_register_clock(clkp);
- if (ret < 0) {
- printk(KERN_ERR "Failed to register clock %s (%d)\n",
- clkp->name, ret);
- }
-
- (clkp->enable)(clkp, 0);
- }
+ s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+ s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c_pwmclk_init();
}
diff --git a/arch/arm/mach-s3c64xx/include/mach/pll.h b/arch/arm/mach-s3c64xx/include/mach/pll.h
index 90bbd72..5ef0bb6 100644
--- a/arch/arm/mach-s3c64xx/include/mach/pll.h
+++ b/arch/arm/mach-s3c64xx/include/mach/pll.h
@@ -20,6 +20,7 @@
#define S3C6400_PLL_SDIV_SHIFT (0)
#include <asm/div64.h>
+#include <plat/pll6553x.h>
static inline unsigned long s3c6400_get_pll(unsigned long baseclk,
u32 pllcon)
@@ -37,38 +38,8 @@ static inline unsigned long s3c6400_get_pll(unsigned long baseclk,
return (unsigned long)fvco;
}
-#define S3C6400_EPLL_MDIV_MASK ((1 << (23-16)) - 1)
-#define S3C6400_EPLL_PDIV_MASK ((1 << (13-8)) - 1)
-#define S3C6400_EPLL_SDIV_MASK ((1 << (2-0)) - 1)
-#define S3C6400_EPLL_MDIV_SHIFT (16)
-#define S3C6400_EPLL_PDIV_SHIFT (8)
-#define S3C6400_EPLL_SDIV_SHIFT (0)
-#define S3C6400_EPLL_KDIV_MASK (0xffff)
-
static inline unsigned long s3c6400_get_epll(unsigned long baseclk)
{
- unsigned long result;
- u32 epll0 = __raw_readl(S3C_EPLL_CON0);
- u32 epll1 = __raw_readl(S3C_EPLL_CON1);
- u32 mdiv, pdiv, sdiv, kdiv;
- u64 tmp;
-
- mdiv = (epll0 >> S3C6400_EPLL_MDIV_SHIFT) & S3C6400_EPLL_MDIV_MASK;
- pdiv = (epll0 >> S3C6400_EPLL_PDIV_SHIFT) & S3C6400_EPLL_PDIV_MASK;
- sdiv = (epll0 >> S3C6400_EPLL_SDIV_SHIFT) & S3C6400_EPLL_SDIV_MASK;
- kdiv = epll1 & S3C6400_EPLL_KDIV_MASK;
-
- /* We need to multiple baseclk by mdiv (the integer part) and kdiv
- * which is in 2^16ths, so shift mdiv up (does not overflow) and
- * add kdiv before multiplying. The use of tmp is to avoid any
- * overflows before shifting bac down into result when multipling
- * by the mdiv and kdiv pair.
- */
-
- tmp = baseclk;
- tmp *= (mdiv << 16) + kdiv;
- do_div(tmp, (pdiv << sdiv));
- result = tmp >> 16;
-
- return result;
+ return s3c_get_pll6553x(baseclk, __raw_readl(S3C_EPLL_CON0),
+ __raw_readl(S3C_EPLL_CON1));
}
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index a830fad..3ce8f01 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -45,6 +45,12 @@ config S3C2410_CLOCK
Clock code for the S3C2410, and similar processors which
is currently includes the S3C2410, S3C2440, S3C2442.
+config S3C2443_CLOCK
+ bool
+ help
+ Clock code for the S3C2443 and similar processors, which includes
+ the S3C2416 and S3C2450.
+
config S3C24XX_DCLK
bool
help
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index c2237c4..44aea88 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -30,6 +30,7 @@ obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_PM) += irq-pm.o
obj-$(CONFIG_PM) += sleep.o
obj-$(CONFIG_S3C2410_CLOCK) += s3c2410-clock.o
+obj-$(CONFIG_S3C2443_CLOCK) += s3c2443-clock.o
obj-$(CONFIG_S3C2410_DMA) += dma.o
obj-$(CONFIG_S3C2410_IOTIMING) += s3c2410-iotiming.o
obj-$(CONFIG_S3C2412_IOTIMING) += s3c2412-iotiming.o
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index 9ca64df..76d0858 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -49,6 +49,7 @@
#include <plat/s3c2400.h>
#include <plat/s3c2410.h>
#include <plat/s3c2412.h>
+#include <plat/s3c2416.h>
#include <plat/s3c244x.h>
#include <plat/s3c2443.h>
@@ -57,6 +58,7 @@
static const char name_s3c2400[] = "S3C2400";
static const char name_s3c2410[] = "S3C2410";
static const char name_s3c2412[] = "S3C2412";
+static const char name_s3c2416[] = "S3C2416/S3C2450";
static const char name_s3c2440[] = "S3C2440";
static const char name_s3c2442[] = "S3C2442";
static const char name_s3c2442b[] = "S3C2442B";
@@ -137,6 +139,15 @@ static struct cpu_table cpu_ids[] __initdata = {
.init = s3c2412_init,
.name = name_s3c2412,
},
+ { /* a strange version of the s3c2416 */
+ .idcode = 0x32450003,
+ .idmask = 0xffffffff,
+ .map_io = s3c2416_map_io,
+ .init_clocks = s3c2416_init_clocks,
+ .init_uarts = s3c2416_init_uarts,
+ .init = s3c2416_init,
+ .name = name_s3c2416,
+ },
{
.idcode = 0x32443001,
.idmask = 0xffffffff,
@@ -170,6 +181,16 @@ static struct map_desc s3c_iodesc[] __initdata = {
static unsigned long s3c24xx_read_idcode_v5(void)
{
+#if defined(CONFIG_CPU_S3C2416)
+ /* s3c2416 is v5, with S3C24XX_GSTATUS1 instead of S3C2412_GSTATUS1 */
+
+ u32 gs = __raw_readl(S3C24XX_GSTATUS1);
+
+ /* test for s3c2416 or similar device */
+ if ((gs >> 16) == 0x3245)
+ return gs;
+#endif
+
#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
return __raw_readl(S3C2412_GSTATUS1);
#else
diff --git a/arch/arm/plat-s3c24xx/include/plat/pll.h b/arch/arm/plat-s3c24xx/include/plat/pll.h
index 7ea8bff..005729a 100644
--- a/arch/arm/plat-s3c24xx/include/plat/pll.h
+++ b/arch/arm/plat-s3c24xx/include/plat/pll.h
@@ -35,3 +35,28 @@ s3c24xx_get_pll(unsigned int pllval, unsigned int baseclk)
return (unsigned int)fvco;
}
+
+#define S3C2416_PLL_M_SHIFT (14)
+#define S3C2416_PLL_P_SHIFT (5)
+#define S3C2416_PLL_S_MASK (7)
+#define S3C2416_PLL_M_MASK ((1 << 10) - 1)
+#define S3C2416_PLL_P_MASK (63)
+
+static inline unsigned int
+s3c2416_get_pll(unsigned int pllval, unsigned int baseclk)
+{
+ unsigned int m, p, s;
+ uint64_t fvco;
+
+ m = pllval >> S3C2416_PLL_M_SHIFT;
+ p = pllval >> S3C2416_PLL_P_SHIFT;
+
+ s = pllval & S3C2416_PLL_S_MASK;
+ m &= S3C2416_PLL_M_MASK;
+ p &= S3C2416_PLL_P_MASK;
+
+ fvco = (uint64_t)baseclk * m;
+ do_div(fvco, (p << s));
+
+ return (unsigned int)fvco;
+}
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2416.h b/arch/arm/plat-s3c24xx/include/plat/s3c2416.h
new file mode 100644
index 0000000..dc3c090
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c2416.h
@@ -0,0 +1,31 @@
+/* linux/include/asm-arm/plat-s3c24xx/s3c2443.h
+ *
+ * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>
+ *
+ * Header file for s3c2416 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifdef CONFIG_CPU_S3C2416
+
+struct s3c2410_uartcfg;
+
+extern int s3c2416_init(void);
+
+extern void s3c2416_map_io(void);
+
+extern void s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+extern void s3c2416_init_clocks(int xtal);
+
+extern int s3c2416_baseclk_add(void);
+
+#else
+#define s3c2416_init_clocks NULL
+#define s3c2416_init_uarts NULL
+#define s3c2416_map_io NULL
+#define s3c2416_init NULL
+#endif
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2443.h b/arch/arm/plat-s3c24xx/include/plat/s3c2443.h
index 815b107..a19715f 100644
--- a/arch/arm/plat-s3c24xx/include/plat/s3c2443.h
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c2443.h
@@ -30,3 +30,22 @@ extern int s3c2443_baseclk_add(void);
#define s3c2443_map_io NULL
#define s3c2443_init NULL
#endif
+
+/* common code used by s3c2443 and others.
+ * note, not to be used outside of arch/arm/mach-s3c* */
+
+struct clk; /* some files don't need clk.h otherwise */
+
+typedef unsigned int (*pll_fn)(unsigned int reg, unsigned int base);
+typedef unsigned int (*fdiv_fn)(unsigned long clkcon0);
+
+extern void s3c2443_common_setup_clocks(pll_fn get_mpll, fdiv_fn fdiv);
+extern void s3c2443_common_init_clocks(int xtal, pll_fn get_mpll, fdiv_fn fdiv);
+
+extern int s3c2443_clkcon_enable_h(struct clk *clk, int enable);
+extern int s3c2443_clkcon_enable_p(struct clk *clk, int enable);
+extern int s3c2443_clkcon_enable_s(struct clk *clk, int enable);
+
+extern struct clksrc_clk clk_epllref;
+extern struct clksrc_clk clk_esysclk;
+extern struct clksrc_clk clk_msysclk;
diff --git a/arch/arm/plat-s3c24xx/s3c2410-clock.c b/arch/arm/plat-s3c24xx/s3c2410-clock.c
index b61bdb7..9ecc5d9 100644
--- a/arch/arm/plat-s3c24xx/s3c2410-clock.c
+++ b/arch/arm/plat-s3c24xx/s3c2410-clock.c
@@ -87,7 +87,7 @@ static int s3c2410_upll_enable(struct clk *clk, int enable)
/* standard clock definitions */
-static struct clk init_clocks_disable[] = {
+static struct clk init_clocks_off[] = {
{
.name = "nand",
.id = -1,
@@ -249,17 +249,8 @@ int __init s3c2410_baseclk_add(void)
/* install (and disable) the clocks we do not need immediately */
- clkp = init_clocks_disable;
- for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
-
- ret = s3c24xx_register_clock(clkp);
- if (ret < 0) {
- printk(KERN_ERR "Failed to register clock %s (%d)\n",
- clkp->name, ret);
- }
-
- s3c2410_clkcon_enable(clkp, 0);
- }
+ s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+ s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
/* show the clock-slow value */
diff --git a/arch/arm/plat-s3c24xx/s3c2443-clock.c b/arch/arm/plat-s3c24xx/s3c2443-clock.c
new file mode 100644
index 0000000..461f070
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2443-clock.c
@@ -0,0 +1,472 @@
+/* linux/arch/arm/plat-s3c24xx/s3c2443-clock.c
+ *
+ * Copyright (c) 2007, 2010 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2443 Clock control suport - common code
+ */
+
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/regs-s3c2443-clock.h>
+
+#include <plat/s3c2443.h>
+#include <plat/clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/cpu.h>
+
+#include <plat/cpu-freq.h>
+
+
+static int s3c2443_gate(void __iomem *reg, struct clk *clk, int enable)
+{
+ u32 ctrlbit = clk->ctrlbit;
+ u32 con = __raw_readl(reg);
+
+ if (enable)
+ con |= ctrlbit;
+ else
+ con &= ~ctrlbit;
+
+ __raw_writel(con, reg);
+ return 0;
+}
+
+int s3c2443_clkcon_enable_h(struct clk *clk, int enable)
+{
+ return s3c2443_gate(S3C2443_HCLKCON, clk, enable);
+}
+
+int s3c2443_clkcon_enable_p(struct clk *clk, int enable)
+{
+ return s3c2443_gate(S3C2443_PCLKCON, clk, enable);
+}
+
+int s3c2443_clkcon_enable_s(struct clk *clk, int enable)
+{
+ return s3c2443_gate(S3C2443_SCLKCON, clk, enable);
+}
+
+/* mpllref is a direct descendant of clk_xtal by default, but it is not
+ * elided as the EPLL can be either sourced by the XTAL or EXTCLK and as
+ * such directly equating the two source clocks is impossible.
+ */
+struct clk clk_mpllref = {
+ .name = "mpllref",
+ .parent = &clk_xtal,
+ .id = -1,
+};
+
+static struct clk *clk_epllref_sources[] = {
+ [0] = &clk_mpllref,
+ [1] = &clk_mpllref,
+ [2] = &clk_xtal,
+ [3] = &clk_ext,
+};
+
+struct clksrc_clk clk_epllref = {
+ .clk = {
+ .name = "epllref",
+ .id = -1,
+ },
+ .sources = &(struct clksrc_sources) {
+ .sources = clk_epllref_sources,
+ .nr_sources = ARRAY_SIZE(clk_epllref_sources),
+ },
+ .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 7 },
+};
+
+/* esysclk
+ *
+ * this is sourced from either the EPLL or the EPLLref clock
+*/
+
+static struct clk *clk_sysclk_sources[] = {
+ [0] = &clk_epllref.clk,
+ [1] = &clk_epll,
+};
+
+struct clksrc_clk clk_esysclk = {
+ .clk = {
+ .name = "esysclk",
+ .parent = &clk_epll,
+ .id = -1,
+ },
+ .sources = &(struct clksrc_sources) {
+ .sources = clk_sysclk_sources,
+ .nr_sources = ARRAY_SIZE(clk_sysclk_sources),
+ },
+ .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 6 },
+};
+
+static unsigned long s3c2443_getrate_mdivclk(struct clk *clk)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ unsigned long div = __raw_readl(S3C2443_CLKDIV0);
+
+ div &= S3C2443_CLKDIV0_EXTDIV_MASK;
+ div >>= (S3C2443_CLKDIV0_EXTDIV_SHIFT-1); /* x2 */
+
+ return parent_rate / (div + 1);
+}
+
+static struct clk clk_mdivclk = {
+ .name = "mdivclk",
+ .parent = &clk_mpllref,
+ .id = -1,
+ .ops = &(struct clk_ops) {
+ .get_rate = s3c2443_getrate_mdivclk,
+ },
+};
+
+static struct clk *clk_msysclk_sources[] = {
+ [0] = &clk_mpllref,
+ [1] = &clk_mpll,
+ [2] = &clk_mdivclk,
+ [3] = &clk_mpllref,
+};
+
+struct clksrc_clk clk_msysclk = {
+ .clk = {
+ .name = "msysclk",
+ .parent = &clk_xtal,
+ .id = -1,
+ },
+ .sources = &(struct clksrc_sources) {
+ .sources = clk_msysclk_sources,
+ .nr_sources = ARRAY_SIZE(clk_msysclk_sources),
+ },
+ .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 3 },
+};
+
+/* prediv
+ *
+ * this divides the msysclk down to pass to h/p/etc.
+ */
+
+static unsigned long s3c2443_prediv_getrate(struct clk *clk)
+{
+ unsigned long rate = clk_get_rate(clk->parent);
+ unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
+
+ clkdiv0 &= S3C2443_CLKDIV0_PREDIV_MASK;
+ clkdiv0 >>= S3C2443_CLKDIV0_PREDIV_SHIFT;
+
+ return rate / (clkdiv0 + 1);
+}
+
+static struct clk clk_prediv = {
+ .name = "prediv",
+ .id = -1,
+ .parent = &clk_msysclk.clk,
+ .ops = &(struct clk_ops) {
+ .get_rate = s3c2443_prediv_getrate,
+ },
+};
+
+/* usbhost
+ *
+ * usb host bus-clock, usually 48MHz to provide USB bus clock timing
+*/
+
+static struct clksrc_clk clk_usb_bus_host = {
+ .clk = {
+ .name = "usb-bus-host-parent",
+ .id = -1,
+ .parent = &clk_esysclk.clk,
+ .ctrlbit = S3C2443_SCLKCON_USBHOST,
+ .enable = s3c2443_clkcon_enable_s,
+ },
+ .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 },
+};
+
+/* common clksrc clocks */
+
+static struct clksrc_clk clksrc_clks[] = {
+ {
+ /* ART baud-rate clock sourced from esysclk via a divisor */
+ .clk = {
+ .name = "uartclk",
+ .id = -1,
+ .parent = &clk_esysclk.clk,
+ },
+ .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 8 },
+ }, {
+ /* camera interface bus-clock, divided down from esysclk */
+ .clk = {
+ .name = "camif-upll", /* same as 2440 name */
+ .id = -1,
+ .parent = &clk_esysclk.clk,
+ .ctrlbit = S3C2443_SCLKCON_CAMCLK,
+ .enable = s3c2443_clkcon_enable_s,
+ },
+ .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 26 },
+ }, {
+ .clk = {
+ .name = "display-if",
+ .id = -1,
+ .parent = &clk_esysclk.clk,
+ .ctrlbit = S3C2443_SCLKCON_DISPCLK,
+ .enable = s3c2443_clkcon_enable_s,
+ },
+ .reg_div = { .reg = S3C2443_CLKDIV1, .size = 8, .shift = 16 },
+ },
+};
+
+
+static struct clk init_clocks_off[] = {
+ {
+ .name = "adc",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c2443_clkcon_enable_p,
+ .ctrlbit = S3C2443_PCLKCON_ADC,
+ }, {
+ .name = "i2c",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c2443_clkcon_enable_p,
+ .ctrlbit = S3C2443_PCLKCON_IIC,
+ }
+};
+
+static struct clk init_clocks[] = {
+ {
+ .name = "dma",
+ .id = 0,
+ .parent = &clk_h,
+ .enable = s3c2443_clkcon_enable_h,
+ .ctrlbit = S3C2443_HCLKCON_DMA0,
+ }, {
+ .name = "dma",
+ .id = 1,
+ .parent = &clk_h,
+ .enable = s3c2443_clkcon_enable_h,
+ .ctrlbit = S3C2443_HCLKCON_DMA1,
+ }, {
+ .name = "dma",
+ .id = 2,
+ .parent = &clk_h,
+ .enable = s3c2443_clkcon_enable_h,
+ .ctrlbit = S3C2443_HCLKCON_DMA2,
+ }, {
+ .name = "dma",
+ .id = 3,
+ .parent = &clk_h,
+ .enable = s3c2443_clkcon_enable_h,
+ .ctrlbit = S3C2443_HCLKCON_DMA3,
+ }, {
+ .name = "dma",
+ .id = 4,
+ .parent = &clk_h,
+ .enable = s3c2443_clkcon_enable_h,
+ .ctrlbit = S3C2443_HCLKCON_DMA4,
+ }, {
+ .name = "dma",
+ .id = 5,
+ .parent = &clk_h,
+ .enable = s3c2443_clkcon_enable_h,
+ .ctrlbit = S3C2443_HCLKCON_DMA5,
+ }, {
+ .name = "hsmmc",
+ .id = 0,
+ .parent = &clk_h,
+ .enable = s3c2443_clkcon_enable_h,
+ .ctrlbit = S3C2443_HCLKCON_HSMMC,
+ }, {
+ .name = "gpio",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c2443_clkcon_enable_p,
+ .ctrlbit = S3C2443_PCLKCON_GPIO,
+ }, {
+ .name = "usb-host",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s3c2443_clkcon_enable_h,
+ .ctrlbit = S3C2443_HCLKCON_USBH,
+ }, {
+ .name = "usb-device",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s3c2443_clkcon_enable_h,
+ .ctrlbit = S3C2443_HCLKCON_USBD,
+ }, {
+ .name = "lcd",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s3c2443_clkcon_enable_h,
+ .ctrlbit = S3C2443_HCLKCON_LCDC,
+
+ }, {
+ .name = "timers",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c2443_clkcon_enable_p,
+ .ctrlbit = S3C2443_PCLKCON_PWMT,
+ }, {
+ .name = "cfc",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s3c2443_clkcon_enable_h,
+ .ctrlbit = S3C2443_HCLKCON_CFC,
+ }, {
+ .name = "ssmc",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s3c2443_clkcon_enable_h,
+ .ctrlbit = S3C2443_HCLKCON_SSMC,
+ }, {
+ .name = "uart",
+ .id = 0,
+ .parent = &clk_p,
+ .enable = s3c2443_clkcon_enable_p,
+ .ctrlbit = S3C2443_PCLKCON_UART0,
+ }, {
+ .name = "uart",
+ .id = 1,
+ .parent = &clk_p,
+ .enable = s3c2443_clkcon_enable_p,
+ .ctrlbit = S3C2443_PCLKCON_UART1,
+ }, {
+ .name = "uart",
+ .id = 2,
+ .parent = &clk_p,
+ .enable = s3c2443_clkcon_enable_p,
+ .ctrlbit = S3C2443_PCLKCON_UART2,
+ }, {
+ .name = "uart",
+ .id = 3,
+ .parent = &clk_p,
+ .enable = s3c2443_clkcon_enable_p,
+ .ctrlbit = S3C2443_PCLKCON_UART3,
+ }, {
+ .name = "rtc",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c2443_clkcon_enable_p,
+ .ctrlbit = S3C2443_PCLKCON_RTC,
+ }, {
+ .name = "watchdog",
+ .id = -1,
+ .parent = &clk_p,
+ .ctrlbit = S3C2443_PCLKCON_WDT,
+ }, {
+ .name = "ac97",
+ .id = -1,
+ .parent = &clk_p,
+ .ctrlbit = S3C2443_PCLKCON_AC97,
+ }, {
+ .name = "nand",
+ .id = -1,
+ .parent = &clk_h,
+ }, {
+ .name = "usb-bus-host",
+ .id = -1,
+ .parent = &clk_usb_bus_host.clk,
+ }
+};
+
+static inline unsigned long s3c2443_get_hdiv(unsigned long clkcon0)
+{
+ clkcon0 &= S3C2443_CLKDIV0_HCLKDIV_MASK;
+
+ return clkcon0 + 1;
+}
+
+/* EPLLCON compatible enough to get on/off information */
+
+void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll,
+ fdiv_fn get_fdiv)
+{
+ unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
+ unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON);
+ unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
+ struct clk *xtal_clk;
+ unsigned long xtal;
+ unsigned long pll;
+ unsigned long fclk;
+ unsigned long hclk;
+ unsigned long pclk;
+ int ptr;
+
+ xtal_clk = clk_get(NULL, "xtal");
+ xtal = clk_get_rate(xtal_clk);
+ clk_put(xtal_clk);
+
+ pll = get_mpll(mpllcon, xtal);
+ clk_msysclk.clk.rate = pll;
+
+ fclk = pll / get_fdiv(clkdiv0);
+ hclk = s3c2443_prediv_getrate(&clk_prediv);
+ hclk /= s3c2443_get_hdiv(clkdiv0);
+ pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1);
+
+ s3c24xx_setup_clocks(fclk, hclk, pclk);
+
+ printk("CPU: MPLL %s %ld.%03ld MHz, cpu %ld.%03ld MHz, mem %ld.%03ld MHz, pclk %ld.%03ld MHz\n",
+ (mpllcon & S3C2443_PLLCON_OFF) ? "off":"on",
+ print_mhz(pll), print_mhz(fclk),
+ print_mhz(hclk), print_mhz(pclk));
+
+ for (ptr = 0; ptr < ARRAY_SIZE(clksrc_clks); ptr++)
+ s3c_set_clksrc(&clksrc_clks[ptr], true);
+
+ /* ensure usb bus clock is within correct rate of 48MHz */
+
+ if (clk_get_rate(&clk_usb_bus_host.clk) != (48 * 1000 * 1000)) {
+ printk(KERN_INFO "Warning: USB host bus not at 48MHz\n");
+ clk_set_rate(&clk_usb_bus_host.clk, 48*1000*1000);
+ }
+
+ printk("CPU: EPLL %s %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n",
+ (epllcon & S3C2443_PLLCON_OFF) ? "off":"on",
+ print_mhz(clk_get_rate(&clk_epll)),
+ print_mhz(clk_get_rate(&clk_usb_bus)));
+}
+
+static struct clk *clks[] __initdata = {
+ &clk_prediv,
+ &clk_mpllref,
+ &clk_mdivclk,
+ &clk_ext,
+ &clk_epll,
+ &clk_usb_bus,
+};
+
+static struct clksrc_clk *clksrcs[] __initdata = {
+ &clk_usb_bus_host,
+ &clk_epllref,
+ &clk_esysclk,
+ &clk_msysclk,
+};
+
+void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll,
+ fdiv_fn get_fdiv)
+{
+ int ptr;
+
+ /* s3c2443 parents h and p clocks from prediv */
+ clk_h.parent = &clk_prediv;
+ clk_p.parent = &clk_prediv;
+
+ clk_usb_bus.parent = &clk_usb_bus_host.clk;
+ clk_epll.parent = &clk_epllref.clk;
+
+ s3c24xx_register_baseclocks(xtal);
+ s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
+
+ for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
+ s3c_register_clksrc(clksrcs[ptr], 1);
+
+ s3c_register_clksrc(clksrc_clks, ARRAY_SIZE(clksrc_clks));
+ s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
+
+ /* See s3c2443/etc notes on disabling clocks at init time */
+ s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+ s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+
+ s3c2443_common_setup_clocks(get_mpll, get_fdiv);
+}
diff --git a/arch/arm/plat-samsung/clock.c b/arch/arm/plat-samsung/clock.c
index 1b25c9d..8bf79f3 100644
--- a/arch/arm/plat-samsung/clock.c
+++ b/arch/arm/plat-samsung/clock.c
@@ -376,6 +376,21 @@ void __init s3c_register_clocks(struct clk *clkp, int nr_clks)
}
}
+/**
+ * s3c_disable_clocks() - disable an array of clocks
+ * @clkp: Pointer to the first clock in the array.
+ * @nr_clks: Number of clocks to register.
+ *
+ * for internal use only at initialisation time. disable the clocks in the
+ * @clkp array.
+ */
+
+void __init s3c_disable_clocks(struct clk *clkp, int nr_clks)
+{
+ for (; nr_clks > 0; nr_clks--, clkp++)
+ (clkp->enable)(clkp, 0);
+}
+
/* initalise all the clocks */
int __init s3c24xx_register_baseclocks(unsigned long xtal)
diff --git a/arch/arm/plat-samsung/dev-fb.c b/arch/arm/plat-samsung/dev-fb.c
index 002a15f..bf60204 100644
--- a/arch/arm/plat-samsung/dev-fb.c
+++ b/arch/arm/plat-samsung/dev-fb.c
@@ -19,7 +19,6 @@
#include <mach/irqs.h>
#include <mach/map.h>
-#include <mach/regs-fb.h>
#include <plat/fb.h>
#include <plat/devs.h>
diff --git a/arch/arm/plat-samsung/include/plat/clock.h b/arch/arm/plat-samsung/include/plat/clock.h
index efbc984..0fbcd0e 100644
--- a/arch/arm/plat-samsung/include/plat/clock.h
+++ b/arch/arm/plat-samsung/include/plat/clock.h
@@ -92,6 +92,7 @@ extern int s3c24xx_register_clock(struct clk *clk);
extern int s3c24xx_register_clocks(struct clk **clk, int nr_clks);
extern void s3c_register_clocks(struct clk *clk, int nr_clks);
+extern void s3c_disable_clocks(struct clk *clkp, int nr_clks);
extern int s3c24xx_register_baseclocks(unsigned long xtal);
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index c54f318..6412933 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -73,6 +73,7 @@ extern struct sys_timer s3c24xx_timer;
extern struct sysdev_class s3c2410_sysclass;
extern struct sysdev_class s3c2410a_sysclass;
extern struct sysdev_class s3c2412_sysclass;
+extern struct sysdev_class s3c2416_sysclass;
extern struct sysdev_class s3c2440_sysclass;
extern struct sysdev_class s3c2442_sysclass;
extern struct sysdev_class s3c2443_sysclass;
diff --git a/arch/arm/plat-samsung/include/plat/fb.h b/arch/arm/plat-samsung/include/plat/fb.h
index ffc01a7..1f85649 100644
--- a/arch/arm/plat-samsung/include/plat/fb.h
+++ b/arch/arm/plat-samsung/include/plat/fb.h
@@ -15,6 +15,13 @@
#ifndef __PLAT_S3C_FB_H
#define __PLAT_S3C_FB_H __FILE__
+/* S3C_FB_MAX_WIN
+ * Set to the maximum number of windows that any of the supported hardware
+ * can use. Since the platform data uses this for an array size, having it
+ * set to the maximum of any version of the hardware can do is safe.
+ */
+#define S3C_FB_MAX_WIN (5)
+
/**
* struct s3c_fb_pd_win - per window setup data
* @win_mode: The display parameters to initialise (not for window 0)
diff --git a/arch/arm/plat-samsung/include/plat/pll6553x.h b/arch/arm/plat-samsung/include/plat/pll6553x.h
new file mode 100644
index 0000000..b8b7e1d
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/pll6553x.h
@@ -0,0 +1,51 @@
+/* arch/arm/plat-samsung/include/plat/pll6553x.h
+ * partially from arch/arm/mach-s3c64xx/include/mach/pll.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * Samsung PLL6553x PLL code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* S3C6400 and compatible (S3C2416, etc.) EPLL code */
+
+#define PLL6553X_MDIV_MASK ((1 << (23-16)) - 1)
+#define PLL6553X_PDIV_MASK ((1 << (13-8)) - 1)
+#define PLL6553X_SDIV_MASK ((1 << (2-0)) - 1)
+#define PLL6553X_MDIV_SHIFT (16)
+#define PLL6553X_PDIV_SHIFT (8)
+#define PLL6553X_SDIV_SHIFT (0)
+#define PLL6553X_KDIV_MASK (0xffff)
+
+static inline unsigned long s3c_get_pll6553x(unsigned long baseclk,
+ u32 pll0, u32 pll1)
+{
+ unsigned long result;
+ u32 mdiv, pdiv, sdiv, kdiv;
+ u64 tmp;
+
+ mdiv = (pll0 >> PLL6553X_MDIV_SHIFT) & PLL6553X_MDIV_MASK;
+ pdiv = (pll0 >> PLL6553X_PDIV_SHIFT) & PLL6553X_PDIV_MASK;
+ sdiv = (pll0 >> PLL6553X_SDIV_SHIFT) & PLL6553X_SDIV_MASK;
+ kdiv = pll1 & PLL6553X_KDIV_MASK;
+
+ /* We need to multiple baseclk by mdiv (the integer part) and kdiv
+ * which is in 2^16ths, so shift mdiv up (does not overflow) and
+ * add kdiv before multiplying. The use of tmp is to avoid any
+ * overflows before shifting bac down into result when multipling
+ * by the mdiv and kdiv pair.
+ */
+
+ tmp = baseclk;
+ tmp *= (mdiv << 16) + kdiv;
+ do_div(tmp, (pdiv << sdiv));
+ result = tmp >> 16;
+
+ return result;
+}
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index f55c494..5f3f03d 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -518,12 +518,13 @@ config SERIAL_S3C2412
Serial port support for the Samsung S3C2412 and S3C2413 SoC
config SERIAL_S3C2440
- tristate "Samsung S3C2440/S3C2442 Serial port support"
- depends on SERIAL_SAMSUNG && (CPU_S3C2440 || CPU_S3C2442)
+ tristate "Samsung S3C2440/S3C2442/S3C2416 Serial port support"
+ depends on SERIAL_SAMSUNG && (CPU_S3C2440 || CPU_S3C2442 || CPU_S3C2416)
default y if CPU_S3C2440
default y if CPU_S3C2442
+ select SERIAL_SAMSUNG_UARTS_4 if CPU_S3C2416
help
- Serial port support for the Samsung S3C2440 and S3C2442 SoC
+ Serial port support for the Samsung S3C2440, S3C2416 and S3C2442 SoC
config SERIAL_S3C24A0
tristate "Samsung S3C24A0 Serial port support"
OpenPOWER on IntegriCloud