summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/ssb/Kconfig6
-rw-r--r--drivers/ssb/Makefile1
-rw-r--r--drivers/ssb/main.c23
-rw-r--r--drivers/ssb/pci.c113
-rw-r--r--drivers/ssb/pcmcia.c518
-rw-r--r--drivers/ssb/sprom.c133
-rw-r--r--drivers/ssb/ssb_private.h17
-rw-r--r--include/linux/ssb/ssb.h4
8 files changed, 648 insertions, 167 deletions
diff --git a/drivers/ssb/Kconfig b/drivers/ssb/Kconfig
index f69ef0b..0f7cce2 100644
--- a/drivers/ssb/Kconfig
+++ b/drivers/ssb/Kconfig
@@ -20,6 +20,10 @@ config SSB
If unsure, say N.
+# Common SPROM support routines
+config SSB_SPROM
+ bool
+
config SSB_PCIHOST_POSSIBLE
bool
depends on SSB && (PCI = y || PCI = SSB)
@@ -28,6 +32,7 @@ config SSB_PCIHOST_POSSIBLE
config SSB_PCIHOST
bool "Support for SSB on PCI-bus host"
depends on SSB_PCIHOST_POSSIBLE
+ select SSB_SPROM
default y
help
Support for a Sonics Silicon Backplane on top
@@ -48,6 +53,7 @@ config SSB_PCMCIAHOST_POSSIBLE
config SSB_PCMCIAHOST
bool "Support for SSB on PCMCIA-bus host (EXPERIMENTAL)"
depends on SSB_PCMCIAHOST_POSSIBLE
+ select SSB_SPROM
help
Support for a Sonics Silicon Backplane on top
of a PCMCIA device.
diff --git a/drivers/ssb/Makefile b/drivers/ssb/Makefile
index 910f35e..6f255e9 100644
--- a/drivers/ssb/Makefile
+++ b/drivers/ssb/Makefile
@@ -1,6 +1,7 @@
# core
ssb-y += main.o scan.o
ssb-$(CONFIG_SSB_EMBEDDED) += embedded.o
+ssb-$(CONFIG_SSB_SPROM) += sprom.o
# host support
ssb-$(CONFIG_SSB_PCIHOST) += pci.o pcihost_wrapper.o
diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c
index 49d7bbb..e123719 100644
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -69,6 +69,25 @@ found:
}
#endif /* CONFIG_SSB_PCIHOST */
+#ifdef CONFIG_SSB_PCMCIAHOST
+struct ssb_bus *ssb_pcmcia_dev_to_bus(struct pcmcia_device *pdev)
+{
+ struct ssb_bus *bus;
+
+ ssb_buses_lock();
+ list_for_each_entry(bus, &buses, list) {
+ if (bus->bustype == SSB_BUSTYPE_PCMCIA &&
+ bus->host_pcmcia == pdev)
+ goto found;
+ }
+ bus = NULL;
+found:
+ ssb_buses_unlock();
+
+ return bus;
+}
+#endif /* CONFIG_SSB_PCMCIAHOST */
+
int ssb_for_each_bus_call(unsigned long data,
int (*func)(struct ssb_bus *bus, unsigned long data))
{
@@ -398,7 +417,7 @@ void ssb_bus_unregister(struct ssb_bus *bus)
list_del(&bus->list);
ssb_buses_unlock();
- /* ssb_pcmcia_exit(bus); */
+ ssb_pcmcia_exit(bus);
ssb_pci_exit(bus);
ssb_iounmap(bus);
}
@@ -663,7 +682,7 @@ out:
err_dequeue:
list_del(&bus->list);
err_pcmcia_exit:
-/* ssb_pcmcia_exit(bus); */
+ ssb_pcmcia_exit(bus);
err_pci_exit:
ssb_pci_exit(bus);
err_unmap:
diff --git a/drivers/ssb/pci.c b/drivers/ssb/pci.c
index 1facc76..f1514b3 100644
--- a/drivers/ssb/pci.c
+++ b/drivers/ssb/pci.c
@@ -227,7 +227,7 @@ static u8 ssb_sprom_crc(const u16 *sprom, u16 size)
return crc;
}
-static int sprom_check_crc(const u16 *sprom, u16 size)
+static int sprom_check_crc(const u16 *sprom, size_t size)
{
u8 crc;
u8 expected_crc;
@@ -242,12 +242,14 @@ static int sprom_check_crc(const u16 *sprom, u16 size)
return 0;
}
-static void sprom_do_read(struct ssb_bus *bus, u16 *sprom)
+static int sprom_do_read(struct ssb_bus *bus, u16 *sprom)
{
int i;
for (i = 0; i < bus->sprom_size; i++)
sprom[i] = ioread16(bus->mmio + SSB_SPROM_BASE + (i * 2));
+
+ return 0;
}
static int sprom_do_write(struct ssb_bus *bus, const u16 *sprom)
@@ -660,71 +662,18 @@ const struct ssb_bus_ops ssb_pci_ops = {
.write32 = ssb_pci_write32,
};
-static int sprom2hex(const u16 *sprom, char *buf, size_t buf_len, u16 size)
-{
- int i, pos = 0;
-
- for (i = 0; i < size; i++)
- pos += snprintf(buf + pos, buf_len - pos - 1,
- "%04X", swab16(sprom[i]) & 0xFFFF);
- pos += snprintf(buf + pos, buf_len - pos - 1, "\n");
-
- return pos + 1;
-}
-
-static int hex2sprom(u16 *sprom, const char *dump, size_t len, u16 size)
-{
- char tmp[5] = { 0 };
- int cnt = 0;
- unsigned long parsed;
-
- if (len < size * 2)
- return -EINVAL;
-
- while (cnt < size) {
- memcpy(tmp, dump, 4);
- dump += 4;
- parsed = simple_strtoul(tmp, NULL, 16);
- sprom[cnt++] = swab16((u16)parsed);
- }
-
- return 0;
-}
-
static ssize_t ssb_pci_attr_sprom_show(struct device *pcidev,
struct device_attribute *attr,
char *buf)
{
struct pci_dev *pdev = container_of(pcidev, struct pci_dev, dev);
struct ssb_bus *bus;
- u16 *sprom;
- int err = -ENODEV;
- ssize_t count = 0;
bus = ssb_pci_dev_to_bus(pdev);
if (!bus)
- goto out;
- err = -ENOMEM;
- sprom = kcalloc(bus->sprom_size, sizeof(u16), GFP_KERNEL);
- if (!sprom)
- goto out;
+ return -ENODEV;
- /* Use interruptible locking, as the SPROM write might
- * be holding the lock for several seconds. So allow userspace
- * to cancel operation. */
- err = -ERESTARTSYS;
- if (mutex_lock_interruptible(&bus->pci_sprom_mutex))
- goto out_kfree;
- sprom_do_read(bus, sprom);
- mutex_unlock(&bus->pci_sprom_mutex);
-
- count = sprom2hex(sprom, buf, PAGE_SIZE, bus->sprom_size);
- err = 0;
-
-out_kfree:
- kfree(sprom);
-out:
- return err ? err : count;
+ return ssb_attr_sprom_show(bus, buf, sprom_do_read);
}
static ssize_t ssb_pci_attr_sprom_store(struct device *pcidev,
@@ -733,55 +682,13 @@ static ssize_t ssb_pci_attr_sprom_store(struct device *pcidev,
{
struct pci_dev *pdev = container_of(pcidev, struct pci_dev, dev);
struct ssb_bus *bus;
- u16 *sprom;
- int res = 0, err = -ENODEV;
bus = ssb_pci_dev_to_bus(pdev);
if (!bus)
- goto out;
- err = -ENOMEM;
- sprom = kcalloc(bus->sprom_size, sizeof(u16), GFP_KERNEL);
- if (!sprom)
- goto out;
- err = hex2sprom(sprom, buf, count, bus->sprom_size);
- if (err) {
- err = -EINVAL;
- goto out_kfree;
- }
- err = sprom_check_crc(sprom, bus->sprom_size);
- if (err) {
- err = -EINVAL;
- goto out_kfree;
- }
+ return -ENODEV;
- /* Use interruptible locking, as the SPROM write might
- * be holding the lock for several seconds. So allow userspace
- * to cancel operation. */
- err = -ERESTARTSYS;
- if (mutex_lock_interruptible(&bus->pci_sprom_mutex))
- goto out_kfree;
- err = ssb_devices_freeze(bus);
- if (err == -EOPNOTSUPP) {
- ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze devices. "
- "No suspend support. Is CONFIG_PM enabled?\n");
- goto out_unlock;
- }
- if (err) {
- ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze all devices\n");
- goto out_unlock;
- }
- res = sprom_do_write(bus, sprom);
- err = ssb_devices_thaw(bus);
- if (err)
- ssb_printk(KERN_ERR PFX "SPROM write: Could not thaw all devices\n");
-out_unlock:
- mutex_unlock(&bus->pci_sprom_mutex);
-out_kfree:
- kfree(sprom);
-out:
- if (res)
- return res;
- return err ? err : count;
+ return ssb_attr_sprom_store(bus, buf, count,
+ sprom_check_crc, sprom_do_write);
}
static DEVICE_ATTR(ssb_sprom, 0600,
@@ -808,7 +715,7 @@ int ssb_pci_init(struct ssb_bus *bus)
return 0;
pdev = bus->host_pci;
- mutex_init(&bus->pci_sprom_mutex);
+ mutex_init(&bus->sprom_mutex);
err = device_create_file(&pdev->dev, &dev_attr_ssb_sprom);
if (err)
goto out;
diff --git a/drivers/ssb/pcmcia.c b/drivers/ssb/pcmcia.c
index 84b3a84..cd49f7c 100644
--- a/drivers/ssb/pcmcia.c
+++ b/drivers/ssb/pcmcia.c
@@ -3,7 +3,7 @@
* PCMCIA-Hostbus related functions
*
* Copyright 2006 Johannes Berg <johannes@sipsolutions.net>
- * Copyright 2007 Michael Buesch <mb@bu3sch.de>
+ * Copyright 2007-2008 Michael Buesch <mb@bu3sch.de>
*
* Licensed under the GNU/GPL. See COPYING for details.
*/
@@ -11,6 +11,7 @@
#include <linux/ssb/ssb.h>
#include <linux/delay.h>
#include <linux/io.h>
+#include <linux/etherdevice.h>
#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
@@ -26,59 +27,132 @@
#define SSB_VERBOSE_PCMCIACORESWITCH_DEBUG 0
+/* PCMCIA configuration registers */
+#define SSB_PCMCIA_CORECTL 0x00
+#define SSB_PCMCIA_CORECTL_RESET 0x80 /* Core reset */
+#define SSB_PCMCIA_CORECTL_IRQEN 0x04 /* IRQ enable */
+#define SSB_PCMCIA_CORECTL_FUNCEN 0x01 /* Function enable */
+#define SSB_PCMCIA_CORECTL2 0x80
+#define SSB_PCMCIA_ADDRESS0 0x2E
+#define SSB_PCMCIA_ADDRESS1 0x30
+#define SSB_PCMCIA_ADDRESS2 0x32
+#define SSB_PCMCIA_MEMSEG 0x34
+#define SSB_PCMCIA_SPROMCTL 0x36
+#define SSB_PCMCIA_SPROMCTL_IDLE 0
+#define SSB_PCMCIA_SPROMCTL_WRITE 1
+#define SSB_PCMCIA_SPROMCTL_READ 2
+#define SSB_PCMCIA_SPROMCTL_WRITEEN 4
+#define SSB_PCMCIA_SPROMCTL_WRITEDIS 7
+#define SSB_PCMCIA_SPROMCTL_DONE 8
+#define SSB_PCMCIA_SPROM_DATALO 0x38
+#define SSB_PCMCIA_SPROM_DATAHI 0x3A
+#define SSB_PCMCIA_SPROM_ADDRLO 0x3C
+#define SSB_PCMCIA_SPROM_ADDRHI 0x3E
+
+/* Hardware invariants CIS tuples */
+#define SSB_PCMCIA_CIS 0x80
+#define SSB_PCMCIA_CIS_ID 0x01
+#define SSB_PCMCIA_CIS_BOARDREV 0x02
+#define SSB_PCMCIA_CIS_PA 0x03
+#define SSB_PCMCIA_CIS_PA_PA0B0_LO 0
+#define SSB_PCMCIA_CIS_PA_PA0B0_HI 1
+#define SSB_PCMCIA_CIS_PA_PA0B1_LO 2
+#define SSB_PCMCIA_CIS_PA_PA0B1_HI 3
+#define SSB_PCMCIA_CIS_PA_PA0B2_LO 4
+#define SSB_PCMCIA_CIS_PA_PA0B2_HI 5
+#define SSB_PCMCIA_CIS_PA_ITSSI 6
+#define SSB_PCMCIA_CIS_PA_MAXPOW 7
+#define SSB_PCMCIA_CIS_OEMNAME 0x04
+#define SSB_PCMCIA_CIS_CCODE 0x05
+#define SSB_PCMCIA_CIS_ANTENNA 0x06
+#define SSB_PCMCIA_CIS_ANTGAIN 0x07
+#define SSB_PCMCIA_CIS_BFLAGS 0x08
+#define SSB_PCMCIA_CIS_LEDS 0x09
+
+/* PCMCIA SPROM size. */
+#define SSB_PCMCIA_SPROM_SIZE 256
+#define SSB_PCMCIA_SPROM_SIZE_BYTES (SSB_PCMCIA_SPROM_SIZE * sizeof(u16))
+
+
+/* Write to a PCMCIA configuration register. */
+static int ssb_pcmcia_cfg_write(struct ssb_bus *bus, u8 offset, u8 value)
+{
+ conf_reg_t reg;
+ int res;
+
+ memset(&reg, 0, sizeof(reg));
+ reg.Offset = offset;
+ reg.Action = CS_WRITE;
+ reg.Value = value;
+ res = pcmcia_access_configuration_register(bus->host_pcmcia, &reg);
+ if (unlikely(res != CS_SUCCESS))
+ return -EBUSY;
+
+ return 0;
+}
+
+/* Read from a PCMCIA configuration register. */
+static int ssb_pcmcia_cfg_read(struct ssb_bus *bus, u8 offset, u8 *value)
+{
+ conf_reg_t reg;
+ int res;
+
+ memset(&reg, 0, sizeof(reg));
+ reg.Offset = offset;
+ reg.Action = CS_READ;
+ res = pcmcia_access_configuration_register(bus->host_pcmcia, &reg);
+ if (unlikely(res != CS_SUCCESS))
+ return -EBUSY;
+ *value = reg.Value;
+
+ return 0;
+}
+
int ssb_pcmcia_switch_coreidx(struct ssb_bus *bus,
u8 coreidx)
{
- struct pcmcia_device *pdev = bus->host_pcmcia;
int err;
int attempts = 0;
u32 cur_core;
- conf_reg_t reg;
u32 addr;
u32 read_addr;
+ u8 val;
addr = (coreidx * SSB_CORE_SIZE) + SSB_ENUM_BASE;
while (1) {
- reg.Action = CS_WRITE;
- reg.Offset = 0x2E;
- reg.Value = (addr & 0x0000F000) >> 12;
- err = pcmcia_access_configuration_register(pdev, &reg);
- if (err != CS_SUCCESS)
+ err = ssb_pcmcia_cfg_write(bus, SSB_PCMCIA_ADDRESS0,
+ (addr & 0x0000F000) >> 12);
+ if (err)
goto error;
- reg.Offset = 0x30;
- reg.Value = (addr & 0x00FF0000) >> 16;
- err = pcmcia_access_configuration_register(pdev, &reg);
- if (err != CS_SUCCESS)
+ err = ssb_pcmcia_cfg_write(bus, SSB_PCMCIA_ADDRESS1,
+ (addr & 0x00FF0000) >> 16);
+ if (err)
goto error;
- reg.Offset = 0x32;
- reg.Value = (addr & 0xFF000000) >> 24;
- err = pcmcia_access_configuration_register(pdev, &reg);
- if (err != CS_SUCCESS)
+ err = ssb_pcmcia_cfg_write(bus, SSB_PCMCIA_ADDRESS2,
+ (addr & 0xFF000000) >> 24);
+ if (err)
goto error;
read_addr = 0;
- reg.Action = CS_READ;
- reg.Offset = 0x2E;
- err = pcmcia_access_configuration_register(pdev, &reg);
- if (err != CS_SUCCESS)
+ err = ssb_pcmcia_cfg_read(bus, SSB_PCMCIA_ADDRESS0, &val);
+ if (err)
goto error;
- read_addr |= ((u32)(reg.Value & 0x0F)) << 12;
- reg.Offset = 0x30;
- err = pcmcia_access_configuration_register(pdev, &reg);
- if (err != CS_SUCCESS)
+ read_addr |= ((u32)(val & 0x0F)) << 12;
+ err = ssb_pcmcia_cfg_read(bus, SSB_PCMCIA_ADDRESS1, &val);
+ if (err)
goto error;
- read_addr |= ((u32)reg.Value) << 16;
- reg.Offset = 0x32;
- err = pcmcia_access_configuration_register(pdev, &reg);
- if (err != CS_SUCCESS)
+ read_addr |= ((u32)val) << 16;
+ err = ssb_pcmcia_cfg_read(bus, SSB_PCMCIA_ADDRESS2, &val);
+ if (err)
goto error;
- read_addr |= ((u32)reg.Value) << 24;
+ read_addr |= ((u32)val) << 24;
cur_core = (read_addr - SSB_ENUM_BASE) / SSB_CORE_SIZE;
if (cur_core == coreidx)
break;
+ err = -ETIMEDOUT;
if (attempts++ > SSB_BAR0_MAX_RETRIES)
goto error;
udelay(10);
@@ -87,7 +161,7 @@ int ssb_pcmcia_switch_coreidx(struct ssb_bus *bus,
return 0;
error:
ssb_printk(KERN_ERR PFX "Failed to switch to core %u\n", coreidx);
- return -ENODEV;
+ return err;
}
int ssb_pcmcia_switch_core(struct ssb_bus *bus,
@@ -112,27 +186,21 @@ int ssb_pcmcia_switch_core(struct ssb_bus *bus,
int ssb_pcmcia_switch_segment(struct ssb_bus *bus, u8 seg)
{
int attempts = 0;
- conf_reg_t reg;
- int res;
+ int err;
+ u8 val;
SSB_WARN_ON((seg != 0) && (seg != 1));
- reg.Offset = 0x34;
- reg.Function = 0;
while (1) {
- reg.Action = CS_WRITE;
- reg.Value = seg;
- res = pcmcia_access_configuration_register(bus->host_pcmcia, &reg);
- if (unlikely(res != CS_SUCCESS))
+ err = ssb_pcmcia_cfg_write(bus, SSB_PCMCIA_MEMSEG, seg);
+ if (err)
goto error;
- reg.Value = 0xFF;
- reg.Action = CS_READ;
- res = pcmcia_access_configuration_register(bus->host_pcmcia, &reg);
- if (unlikely(res != CS_SUCCESS))
+ err = ssb_pcmcia_cfg_read(bus, SSB_PCMCIA_MEMSEG, &val);
+ if (err)
goto error;
-
- if (reg.Value == seg)
+ if (val == seg)
break;
+ err = -ETIMEDOUT;
if (unlikely(attempts++ > SSB_BAR0_MAX_RETRIES))
goto error;
udelay(10);
@@ -142,7 +210,7 @@ int ssb_pcmcia_switch_segment(struct ssb_bus *bus, u8 seg)
return 0;
error:
ssb_printk(KERN_ERR PFX "Failed to switch pcmcia segment\n");
- return -ENODEV;
+ return err;
}
static int select_core_and_segment(struct ssb_device *dev,
@@ -276,18 +344,344 @@ const struct ssb_bus_ops ssb_pcmcia_ops = {
.write32 = ssb_pcmcia_write32,
};
-#include <linux/etherdevice.h>
+static int ssb_pcmcia_sprom_command(struct ssb_bus *bus, u8 command)
+{
+ unsigned int i;
+ int err;
+ u8 value;
+
+ err = ssb_pcmcia_cfg_write(bus, SSB_PCMCIA_SPROMCTL, command);
+ if (err)
+ return err;
+ for (i = 0; i < 1000; i++) {
+ err = ssb_pcmcia_cfg_read(bus, SSB_PCMCIA_SPROMCTL, &value);
+ if (err)
+ return err;
+ if (value & SSB_PCMCIA_SPROMCTL_DONE)
+ return 0;
+ udelay(10);
+ }
+
+ return -ETIMEDOUT;
+}
+
+/* offset is the 16bit word offset */
+static int ssb_pcmcia_sprom_read(struct ssb_bus *bus, u16 offset, u16 *value)
+{
+ int err;
+ u8 lo, hi;
+
+ offset *= 2; /* Make byte offset */
+
+ err = ssb_pcmcia_cfg_write(bus, SSB_PCMCIA_SPROM_ADDRLO,
+ (offset & 0x00FF));
+ if (err)
+ return err;
+ err = ssb_pcmcia_cfg_write(bus, SSB_PCMCIA_SPROM_ADDRHI,
+ (offset & 0xFF00) >> 8);
+ if (err)
+ return err;
+ err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_READ);
+ if (err)
+ return err;
+ err = ssb_pcmcia_cfg_read(bus, SSB_PCMCIA_SPROM_DATALO, &lo);
+ if (err)
+ return err;
+ err = ssb_pcmcia_cfg_read(bus, SSB_PCMCIA_SPROM_DATAHI, &hi);
+ if (err)
+ return err;
+ *value = (lo | (((u16)hi) << 8));
+
+ return 0;
+}
+
+/* offset is the 16bit word offset */
+static int ssb_pcmcia_sprom_write(struct ssb_bus *bus, u16 offset, u16 value)
+{
+ int err;
+
+ offset *= 2; /* Make byte offset */
+
+ err = ssb_pcmcia_cfg_write(bus, SSB_PCMCIA_SPROM_ADDRLO,
+ (offset & 0x00FF));
+ if (err)
+ return err;
+ err = ssb_pcmcia_cfg_write(bus, SSB_PCMCIA_SPROM_ADDRHI,
+ (offset & 0xFF00) >> 8);
+ if (err)
+ return err;
+ err = ssb_pcmcia_cfg_write(bus, SSB_PCMCIA_SPROM_DATALO,
+ (value & 0x00FF));
+ if (err)
+ return err;
+ err = ssb_pcmcia_cfg_write(bus, SSB_PCMCIA_SPROM_DATAHI,
+ (value & 0xFF00) >> 8);
+ if (err)
+ return err;
+ err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITE);
+ if (err)
+ return err;
+ msleep(20);
+
+ return 0;
+}
+
+/* Read the SPROM image. bufsize is in 16bit words. */
+static int ssb_pcmcia_sprom_read_all(struct ssb_bus *bus, u16 *sprom)
+{
+ int err, i;
+
+ for (i = 0; i < SSB_PCMCIA_SPROM_SIZE; i++) {
+ err = ssb_pcmcia_sprom_read(bus, i, &sprom[i]);
+ if (err)
+ return err;
+ }
+
+ return 0;
+}
+
+/* Write the SPROM image. size is in 16bit words. */
+static int ssb_pcmcia_sprom_write_all(struct ssb_bus *bus, const u16 *sprom)
+{
+ int i, err;
+ bool failed = 0;
+ size_t size = SSB_PCMCIA_SPROM_SIZE;
+
+ ssb_printk(KERN_NOTICE PFX
+ "Writing SPROM. Do NOT turn off the power! "
+ "Please stand by...\n");
+ err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEEN);
+ if (err) {
+ ssb_printk(KERN_NOTICE PFX
+ "Could not enable SPROM write access.\n");
+ return -EBUSY;
+ }
+ ssb_printk(KERN_NOTICE PFX "[ 0%%");
+ msleep(500);
+ for (i = 0; i < size; i++) {
+ if (i == size / 4)
+ ssb_printk("25%%");
+ else if (i == size / 2)
+ ssb_printk("50%%");
+ else if (i == (size * 3) / 4)
+ ssb_printk("75%%");
+ else if (i % 2)
+ ssb_printk(".");
+ err = ssb_pcmcia_sprom_write(bus, i, sprom[i]);
+ if (err) {
+ ssb_printk("\n" KERN_NOTICE PFX
+ "Failed to write to SPROM.\n");
+ failed = 1;
+ break;
+ }
+ }
+ err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEDIS);
+ if (err) {
+ ssb_printk("\n" KERN_NOTICE PFX
+ "Could not disable SPROM write access.\n");
+ failed = 1;
+ }
+ msleep(500);
+ if (!failed) {
+ ssb_printk("100%% ]\n");
+ ssb_printk(KERN_NOTICE PFX "SPROM written.\n");
+ }
+
+ return failed ? -EBUSY : 0;
+}
+
+static int ssb_pcmcia_sprom_check_crc(const u16 *sprom, size_t size)
+{
+ //TODO
+ return 0;
+}
+
+#define GOTO_ERROR_ON(condition, description) do { \
+ if (unlikely(condition)) { \
+ error_description = description; \
+ goto error; \
+ } \
+ } while (0)
+
int ssb_pcmcia_get_invariants(struct ssb_bus *bus,
struct ssb_init_invariants *iv)
{
- //TODO
- random_ether_addr(iv->sprom.il0mac);
+ tuple_t tuple;
+ int res;
+ unsigned char buf[32];
+ struct ssb_sprom *sprom = &iv->sprom;
+ struct ssb_boardinfo *bi = &iv->boardinfo;
+ const char *error_description;
+
+ memset(sprom, 0xFF, sizeof(*sprom));
+ sprom->revision = 1;
+ sprom->boardflags_lo = 0;
+ sprom->boardflags_hi = 0;
+
+ /* First fetch the MAC address. */
+ memset(&tuple, 0, sizeof(tuple));
+ tuple.DesiredTuple = CISTPL_FUNCE;
+ tuple.TupleData = buf;
+ tuple.TupleDataMax = sizeof(buf);
+ res = pcmcia_get_first_tuple(bus->host_pcmcia, &tuple);
+ GOTO_ERROR_ON(res != CS_SUCCESS, "MAC first tpl");
+ res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
+ GOTO_ERROR_ON(res != CS_SUCCESS, "MAC first tpl data");
+ while (1) {
+ GOTO_ERROR_ON(tuple.TupleDataLen < 1, "MAC tpl < 1");
+ if (tuple.TupleData[0] == CISTPL_FUNCE_LAN_NODE_ID)
+ break;
+ res = pcmcia_get_next_tuple(bus->host_pcmcia, &tuple);
+ GOTO_ERROR_ON(res != CS_SUCCESS, "MAC next tpl");
+ res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
+ GOTO_ERROR_ON(res != CS_SUCCESS, "MAC next tpl data");
+ }
+ GOTO_ERROR_ON(tuple.TupleDataLen != ETH_ALEN + 2, "MAC tpl size");
+ memcpy(sprom->il0mac, &tuple.TupleData[2], ETH_ALEN);
+
+ /* Fetch the vendor specific tuples. */
+ memset(&tuple, 0, sizeof(tuple));
+ tuple.DesiredTuple = SSB_PCMCIA_CIS;
+ tuple.TupleData = buf;
+ tuple.TupleDataMax = sizeof(buf);
+ res = pcmcia_get_first_tuple(bus->host_pcmcia, &tuple);
+ GOTO_ERROR_ON(res != CS_SUCCESS, "VEN first tpl");
+ res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
+ GOTO_ERROR_ON(res != CS_SUCCESS, "VEN first tpl data");
+ while (1) {
+ GOTO_ERROR_ON(tuple.TupleDataLen < 1, "VEN tpl < 1");
+ switch (tuple.TupleData[0]) {
+ case SSB_PCMCIA_CIS_ID:
+ GOTO_ERROR_ON((tuple.TupleDataLen != 5) &&
+ (tuple.TupleDataLen != 7),
+ "id tpl size");
+ bi->vendor = tuple.TupleData[1] |
+ ((u16)tuple.TupleData[2] << 8);
+ break;
+ case SSB_PCMCIA_CIS_BOARDREV:
+ GOTO_ERROR_ON(tuple.TupleDataLen != 2,
+ "boardrev tpl size");
+ sprom->board_rev = tuple.TupleData[1];
+ break;
+ case SSB_PCMCIA_CIS_PA:
+ GOTO_ERROR_ON(tuple.TupleDataLen != 9,
+ "pa tpl size");
+ sprom->pa0b0 = tuple.TupleData[1] |
+ ((u16)tuple.TupleData[2] << 8);
+ sprom->pa0b1 = tuple.TupleData[3] |
+ ((u16)tuple.TupleData[4] << 8);
+ sprom->pa0b2 = tuple.TupleData[5] |
+ ((u16)tuple.TupleData[6] << 8);
+ sprom->itssi_a = tuple.TupleData[7];
+ sprom->itssi_bg = tuple.TupleData[7];
+ sprom->maxpwr_a = tuple.TupleData[8];
+ sprom->maxpwr_bg = tuple.TupleData[8];
+ break;
+ case SSB_PCMCIA_CIS_OEMNAME:
+ /* We ignore this. */
+ break;
+ case SSB_PCMCIA_CIS_CCODE:
+ GOTO_ERROR_ON(tuple.TupleDataLen != 2,
+ "ccode tpl size");
+ sprom->country_code = tuple.TupleData[1];
+ break;
+ case SSB_PCMCIA_CIS_ANTENNA:
+ GOTO_ERROR_ON(tuple.TupleDataLen != 2,
+ "ant tpl size");
+ sprom->ant_available_a = tuple.TupleData[1];
+ sprom->ant_available_bg = tuple.TupleData[1];
+ break;
+ case SSB_PCMCIA_CIS_ANTGAIN:
+ GOTO_ERROR_ON(tuple.TupleDataLen != 2,
+ "antg tpl size");
+ sprom->antenna_gain.ghz24.a0 = tuple.TupleData[1];
+ sprom->antenna_gain.ghz24.a1 = tuple.TupleData[1];
+ sprom->antenna_gain.ghz24.a2 = tuple.TupleData[1];
+ sprom->antenna_gain.ghz24.a3 = tuple.TupleData[1];
+ sprom->antenna_gain.ghz5.a0 = tuple.TupleData[1];
+ sprom->antenna_gain.ghz5.a1 = tuple.TupleData[1];
+ sprom->antenna_gain.ghz5.a2 = tuple.TupleData[1];
+ sprom->antenna_gain.ghz5.a3 = tuple.TupleData[1];
+ break;
+ case SSB_PCMCIA_CIS_BFLAGS:
+ GOTO_ERROR_ON(tuple.TupleDataLen != 3,
+ "bfl tpl size");
+ sprom->boardflags_lo = tuple.TupleData[1] |
+ ((u16)tuple.TupleData[2] << 8);
+ break;
+ case SSB_PCMCIA_CIS_LEDS:
+ GOTO_ERROR_ON(tuple.TupleDataLen != 5,
+ "leds tpl size");
+ sprom->gpio0 = tuple.TupleData[1];
+ sprom->gpio1 = tuple.TupleData[2];
+ sprom->gpio2 = tuple.TupleData[3];
+ sprom->gpio3 = tuple.TupleData[4];
+ break;
+ }
+ res = pcmcia_get_next_tuple(bus->host_pcmcia, &tuple);
+ if (res == CS_NO_MORE_ITEMS)
+ break;
+ GOTO_ERROR_ON(res != CS_SUCCESS, "VEN next tpl");
+ res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
+ GOTO_ERROR_ON(res != CS_SUCCESS, "VEN next tpl data");
+ }
+
return 0;
+error:
+ ssb_printk(KERN_ERR PFX
+ "PCMCIA: Failed to fetch device invariants: %s\n",
+ error_description);
+ return -ENODEV;
+}
+
+static ssize_t ssb_pcmcia_attr_sprom_show(struct device *pcmciadev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct pcmcia_device *pdev =
+ container_of(pcmciadev, struct pcmcia_device, dev);
+ struct ssb_bus *bus;
+
+ bus = ssb_pcmcia_dev_to_bus(pdev);
+ if (!bus)
+ return -ENODEV;
+
+ return ssb_attr_sprom_show(bus, buf,
+ ssb_pcmcia_sprom_read_all);
+}
+
+static ssize_t ssb_pcmcia_attr_sprom_store(struct device *pcmciadev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct pcmcia_device *pdev =
+ container_of(pcmciadev, struct pcmcia_device, dev);
+ struct ssb_bus *bus;
+
+ bus = ssb_pcmcia_dev_to_bus(pdev);
+ if (!bus)
+ return -ENODEV;
+
+ return ssb_attr_sprom_store(bus, buf, count,
+ ssb_pcmcia_sprom_check_crc,
+ ssb_pcmcia_sprom_write_all);
+}
+
+static DEVICE_ATTR(ssb_sprom, 0600,
+ ssb_pcmcia_attr_sprom_show,
+ ssb_pcmcia_attr_sprom_store);
+
+void ssb_pcmcia_exit(struct ssb_bus *bus)
+{
+ if (bus->bustype != SSB_BUSTYPE_PCMCIA)
+ return;
+
+ device_remove_file(&bus->host_pcmcia->dev, &dev_attr_ssb_sprom);
}
int ssb_pcmcia_init(struct ssb_bus *bus)
{
- conf_reg_t reg;
+ u8 val, offset;
int err;
if (bus->bustype != SSB_BUSTYPE_PCMCIA)
@@ -298,22 +692,26 @@ int ssb_pcmcia_init(struct ssb_bus *bus)
ssb_pcmcia_switch_segment(bus, 0);
/* Init IRQ routing */
- reg.Action = CS_READ;
- reg.Function = 0;
if (bus->chip_id == 0x4306)
- reg.Offset = 0x00;
+ offset = SSB_PCMCIA_CORECTL;
else
- reg.Offset = 0x80;
- err = pcmcia_access_configuration_register(bus->host_pcmcia, &reg);
- if (err != CS_SUCCESS)
+ offset = SSB_PCMCIA_CORECTL2;
+ err = ssb_pcmcia_cfg_read(bus, offset, &val);
+ if (err)
goto error;
- reg.Action = CS_WRITE;
- reg.Value |= 0x04 | 0x01;
- err = pcmcia_access_configuration_register(bus->host_pcmcia, &reg);
- if (err != CS_SUCCESS)
+ val |= SSB_PCMCIA_CORECTL_IRQEN | SSB_PCMCIA_CORECTL_FUNCEN;
+ err = ssb_pcmcia_cfg_write(bus, offset, val);
+ if (err)
+ goto error;
+
+ bus->sprom_size = SSB_PCMCIA_SPROM_SIZE;
+ mutex_init(&bus->sprom_mutex);
+ err = device_create_file(&bus->host_pcmcia->dev, &dev_attr_ssb_sprom);
+ if (err)
goto error;
return 0;
error:
- return -ENODEV;
+ ssb_printk(KERN_ERR PFX "Failed to initialize PCMCIA host device\n");
+ return err;
}
diff --git a/drivers/ssb/sprom.c b/drivers/ssb/sprom.c
new file mode 100644
index 0000000..3668edb
--- /dev/null
+++ b/drivers/ssb/sprom.c
@@ -0,0 +1,133 @@
+/*
+ * Sonics Silicon Backplane
+ * Common SPROM support routines
+ *
+ * Copyright (C) 2005-2008 Michael Buesch <mb@bu3sch.de>
+ * Copyright (C) 2005 Martin Langer <martin-langer@gmx.de>
+ * Copyright (C) 2005 Stefano Brivio <st3@riseup.net>
+ * Copyright (C) 2005 Danny van Dyk <kugelfang@gentoo.org>
+ * Copyright (C) 2005 Andreas Jaggi <andreas.jaggi@waterwave.ch>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "ssb_private.h"
+
+
+static int sprom2hex(const u16 *sprom, char *buf, size_t buf_len,
+ size_t sprom_size_words)
+{
+ int i, pos = 0;
+
+ for (i = 0; i < sprom_size_words; i++)
+ pos += snprintf(buf + pos, buf_len - pos - 1,
+ "%04X", swab16(sprom[i]) & 0xFFFF);
+ pos += snprintf(buf + pos, buf_len - pos - 1, "\n");
+
+ return pos + 1;
+}
+
+static int hex2sprom(u16 *sprom, const char *dump, size_t len,
+ size_t sprom_size_words)
+{
+ char tmp[5] = { 0 };
+ int cnt = 0;
+ unsigned long parsed;
+
+ if (len < sprom_size_words * 2)
+ return -EINVAL;
+
+ while (cnt < sprom_size_words) {
+ memcpy(tmp, dump, 4);
+ dump += 4;
+ parsed = simple_strtoul(tmp, NULL, 16);
+ sprom[cnt++] = swab16((u16)parsed);
+ }
+
+ return 0;
+}
+
+/* Common sprom device-attribute show-handler */
+ssize_t ssb_attr_sprom_show(struct ssb_bus *bus, char *buf,
+ int (*sprom_read)(struct ssb_bus *bus, u16 *sprom))
+{
+ u16 *sprom;
+ int err = -ENOMEM;
+ ssize_t count = 0;
+ size_t sprom_size_words = bus->sprom_size;
+
+ sprom = kcalloc(sprom_size_words, sizeof(u16), GFP_KERNEL);
+ if (!sprom)
+ goto out;
+
+ /* Use interruptible locking, as the SPROM write might
+ * be holding the lock for several seconds. So allow userspace
+ * to cancel operation. */
+ err = -ERESTARTSYS;
+ if (mutex_lock_interruptible(&bus->sprom_mutex))
+ goto out_kfree;
+ err = sprom_read(bus, sprom);
+ mutex_unlock(&bus->sprom_mutex);
+
+ if (!err)
+ count = sprom2hex(sprom, buf, PAGE_SIZE, sprom_size_words);
+
+out_kfree:
+ kfree(sprom);
+out:
+ return err ? err : count;
+}
+
+/* Common sprom device-attribute store-handler */
+ssize_t ssb_attr_sprom_store(struct ssb_bus *bus,
+ const char *buf, size_t count,
+ int (*sprom_check_crc)(const u16 *sprom, size_t size),
+ int (*sprom_write)(struct ssb_bus *bus, const u16 *sprom))
+{
+ u16 *sprom;
+ int res = 0, err = -ENOMEM;
+ size_t sprom_size_words = bus->sprom_size;
+
+ sprom = kcalloc(bus->sprom_size, sizeof(u16), GFP_KERNEL);
+ if (!sprom)
+ goto out;
+ err = hex2sprom(sprom, buf, count, sprom_size_words);
+ if (err) {
+ err = -EINVAL;
+ goto out_kfree;
+ }
+ err = sprom_check_crc(sprom, sprom_size_words);
+ if (err) {
+ err = -EINVAL;
+ goto out_kfree;
+ }
+
+ /* Use interruptible locking, as the SPROM write might
+ * be holding the lock for several seconds. So allow userspace
+ * to cancel operation. */
+ err = -ERESTARTSYS;
+ if (mutex_lock_interruptible(&bus->sprom_mutex))
+ goto out_kfree;
+ err = ssb_devices_freeze(bus);
+ if (err == -EOPNOTSUPP) {
+ ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze devices. "
+ "No suspend support. Is CONFIG_PM enabled?\n");
+ goto out_unlock;
+ }
+ if (err) {
+ ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze all devices\n");
+ goto out_unlock;
+ }
+ res = sprom_write(bus, sprom);
+ err = ssb_devices_thaw(bus);
+ if (err)
+ ssb_printk(KERN_ERR PFX "SPROM write: Could not thaw all devices\n");
+out_unlock:
+ mutex_unlock(&bus->sprom_mutex);
+out_kfree:
+ kfree(sprom);
+out:
+ if (res)
+ return res;
+ return err ? err : count;
+}
diff --git a/drivers/ssb/ssb_private.h b/drivers/ssb/ssb_private.h
index d03b209..a83bf7a 100644
--- a/drivers/ssb/ssb_private.h
+++ b/drivers/ssb/ssb_private.h
@@ -81,6 +81,7 @@ extern int ssb_pcmcia_switch_segment(struct ssb_bus *bus,
u8 seg);
extern int ssb_pcmcia_get_invariants(struct ssb_bus *bus,
struct ssb_init_invariants *iv);
+extern void ssb_pcmcia_exit(struct ssb_bus *bus);
extern int ssb_pcmcia_init(struct ssb_bus *bus);
extern const struct ssb_bus_ops ssb_pcmcia_ops;
#else /* CONFIG_SSB_PCMCIAHOST */
@@ -99,6 +100,9 @@ static inline int ssb_pcmcia_switch_segment(struct ssb_bus *bus,
{
return 0;
}
+static inline void ssb_pcmcia_exit(struct ssb_bus *bus)
+{
+}
static inline int ssb_pcmcia_init(struct ssb_bus *bus)
{
return 0;
@@ -113,6 +117,17 @@ extern int ssb_bus_scan(struct ssb_bus *bus,
extern void ssb_iounmap(struct ssb_bus *ssb);
+/* sprom.c */
+extern
+ssize_t ssb_attr_sprom_show(struct ssb_bus *bus, char *buf,
+ int (*sprom_read)(struct ssb_bus *bus, u16 *sprom));
+extern
+ssize_t ssb_attr_sprom_store(struct ssb_bus *bus,
+ const char *buf, size_t count,
+ int (*sprom_check_crc)(const u16 *sprom, size_t size),
+ int (*sprom_write)(struct ssb_bus *bus, const u16 *sprom));
+
+
/* core.c */
extern u32 ssb_calc_clock_rate(u32 plltype, u32 n, u32 m);
extern int ssb_devices_freeze(struct ssb_bus *bus);
@@ -120,6 +135,8 @@ extern int ssb_devices_thaw(struct ssb_bus *bus);
extern struct ssb_bus *ssb_pci_dev_to_bus(struct pci_dev *pdev);
int ssb_for_each_bus_call(unsigned long data,
int (*func)(struct ssb_bus *bus, unsigned long data));
+extern struct ssb_bus *ssb_pcmcia_dev_to_bus(struct pcmcia_device *pdev);
+
/* b43_pci_bridge.c */
#ifdef CONFIG_SSB_B43_PCI_BRIDGE
diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h
index b7c3889..8644e03 100644
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
@@ -245,9 +245,9 @@ struct ssb_bus {
/* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */
struct pcmcia_device *host_pcmcia;
-#ifdef CONFIG_SSB_PCIHOST
+#ifdef CONFIG_SSB_SPROM
/* Mutex to protect the SPROM writing. */
- struct mutex pci_sprom_mutex;
+ struct mutex sprom_mutex;
#endif
/* ID information about the Chip. */
OpenPOWER on IntegriCloud