diff options
-rw-r--r-- | arch/arm/mach-omap1/board-osk.c | 13 | ||||
-rw-r--r-- | drivers/mtd/maps/omap_nor.c | 23 | ||||
-rw-r--r-- | drivers/pcmcia/omap_cf.c | 25 | ||||
-rw-r--r-- | include/asm-arm/arch-omap/tc.h | 10 |
4 files changed, 43 insertions, 28 deletions
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index a66505f..82ec34c 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -267,13 +267,17 @@ static struct i2c_board_info __initdata osk_i2c_board_info[] = { static void __init osk_init_smc91x(void) { + u32 l; + if ((gpio_request(0, "smc_irq")) < 0) { printk("Error requesting gpio 0 for smc91x irq\n"); return; } /* Check EMIFS wait states to fix errors with SMC_GET_PKT_HDR */ - EMIFS_CCS(1) |= 0x3; + l = omap_readl(EMIFS_CCS(1)); + l |= 0x3; + omap_writel(l, EMIFS_CCS(1)); } static void __init osk_init_cf(void) @@ -526,13 +530,16 @@ static void __init osk_mistral_init(void) { } static void __init osk_init(void) { + u32 l; + /* Workaround for wrong CS3 (NOR flash) timing * There are some U-Boot versions out there which configure * wrong CS3 memory timings. This mainly leads to CRC * or similar errors if you use NOR flash (e.g. with JFFS2) */ - if (EMIFS_CCS(3) != EMIFS_CS3_VAL) - EMIFS_CCS(3) = EMIFS_CS3_VAL; + l = omap_readl(EMIFS_CCS(3)); + if (l != EMIFS_CS3_VAL) + omap_writel(EMIFS_CS3_VAL, EMIFS_CCS(3)); osk_flash_resource.end = osk_flash_resource.start = omap_cs3_phys(); osk_flash_resource.end += SZ_32M - 1; diff --git a/drivers/mtd/maps/omap_nor.c b/drivers/mtd/maps/omap_nor.c index c12d805..68eec6c 100644 --- a/drivers/mtd/maps/omap_nor.c +++ b/drivers/mtd/maps/omap_nor.c @@ -60,13 +60,22 @@ struct omapflash_info { static void omap_set_vpp(struct map_info *map, int enable) { static int count; - - if (enable) { - if (count++ == 0) - OMAP_EMIFS_CONFIG_REG |= OMAP_EMIFS_CONFIG_WP; - } else { - if (count && (--count == 0)) - OMAP_EMIFS_CONFIG_REG &= ~OMAP_EMIFS_CONFIG_WP; + u32 l; + + if (cpu_class_is_omap1()) { + if (enable) { + if (count++ == 0) { + l = omap_readl(EMIFS_CONFIG); + l |= OMAP_EMIFS_CONFIG_WP; + omap_writel(l, EMIFS_CONFIG); + } + } else { + if (count && (--count == 0)) { + l = omap_readl(EMIFS_CONFIG); + l &= ~OMAP_EMIFS_CONFIG_WP; + omap_writel(l, EMIFS_CONFIG); + } + } } } diff --git a/drivers/pcmcia/omap_cf.c b/drivers/pcmcia/omap_cf.c index 46314b4..569b746 100644 --- a/drivers/pcmcia/omap_cf.c +++ b/drivers/pcmcia/omap_cf.c @@ -38,19 +38,19 @@ #define CF_BASE 0xfffe2800 /* status; read after IRQ */ -#define CF_STATUS_REG __REG16(CF_BASE + 0x00) +#define CF_STATUS (CF_BASE + 0x00) # define CF_STATUS_BAD_READ (1 << 2) # define CF_STATUS_BAD_WRITE (1 << 1) # define CF_STATUS_CARD_DETECT (1 << 0) /* which chipselect (CS0..CS3) is used for CF (active low) */ -#define CF_CFG_REG __REG16(CF_BASE + 0x02) +#define CF_CFG (CF_BASE + 0x02) /* card reset */ -#define CF_CONTROL_REG __REG16(CF_BASE + 0x04) +#define CF_CONTROL (CF_BASE + 0x04) # define CF_CONTROL_RESET (1 << 0) -#define omap_cf_present() (!(CF_STATUS_REG & CF_STATUS_CARD_DETECT)) +#define omap_cf_present() (!(omap_readw(CF_STATUS) & CF_STATUS_CARD_DETECT)) /*--------------------------------------------------------------------------*/ @@ -139,11 +139,11 @@ omap_cf_set_socket(struct pcmcia_socket *sock, struct socket_state_t *s) return -EINVAL; } - control = CF_CONTROL_REG; + control = omap_readw(CF_CONTROL); if (s->flags & SS_RESET) - CF_CONTROL_REG = CF_CONTROL_RESET; + omap_writew(CF_CONTROL_RESET, CF_CONTROL); else - CF_CONTROL_REG = 0; + omap_writew(0, CF_CONTROL); pr_debug("%s: Vcc %d, io_irq %d, flags %04x csc %04x\n", driver_name, s->Vcc, s->io_irq, s->flags, s->csc_mask); @@ -270,7 +270,7 @@ static int __init omap_cf_probe(struct platform_device *pdev) omap_cfg_reg(V10_1610_CF_IREQ); omap_cfg_reg(W10_1610_CF_RESET); - CF_CFG_REG = ~(1 << seg); + omap_writew(~(1 << seg), CF_CFG); pr_info("%s: cs%d on irq %d\n", driver_name, seg, irq); @@ -279,14 +279,15 @@ static int __init omap_cf_probe(struct platform_device *pdev) * CF/PCMCIA variants... */ pr_debug("%s: cs%d, previous ccs %08x acs %08x\n", driver_name, - seg, EMIFS_CCS(seg), EMIFS_ACS(seg)); - EMIFS_CCS(seg) = 0x0004a1b3; /* synch mode 4 etc */ - EMIFS_ACS(seg) = 0x00000000; /* OE hold/setup */ + seg, omap_readl(EMIFS_CCS(seg)), omap_readl(EMIFS_ACS(seg))); + omap_writel(0x0004a1b3, EMIFS_CCS(seg)); /* synch mode 4 etc */ + omap_writel(0x00000000, EMIFS_ACS(seg)); /* OE hold/setup */ /* CF uses armxor_ck, which is "always" available */ pr_debug("%s: sts %04x cfg %04x control %04x %s\n", driver_name, - CF_STATUS_REG, CF_CFG_REG, CF_CONTROL_REG, + omap_readw(CF_STATUS), omap_readw(CF_CFG), + omap_readw(CF_CONTROL), omap_cf_present() ? "present" : "(not present)"); cf->socket.owner = THIS_MODULE; diff --git a/include/asm-arm/arch-omap/tc.h b/include/asm-arm/arch-omap/tc.h index 8ded218..65a9c82 100644 --- a/include/asm-arm/arch-omap/tc.h +++ b/include/asm-arm/arch-omap/tc.h @@ -75,16 +75,14 @@ #ifndef __ASSEMBLER__ /* EMIF Slow Interface Configuration Register */ -#define OMAP_EMIFS_CONFIG_REG __REG32(EMIFS_CONFIG) - #define OMAP_EMIFS_CONFIG_FR (1 << 4) #define OMAP_EMIFS_CONFIG_PDE (1 << 3) #define OMAP_EMIFS_CONFIG_PWD_EN (1 << 2) #define OMAP_EMIFS_CONFIG_BM (1 << 1) #define OMAP_EMIFS_CONFIG_WP (1 << 0) -#define EMIFS_CCS(n) __REG32(EMIFS_CS0_CONFIG + (4 * (n))) -#define EMIFS_ACS(n) __REG32(EMIFS_ACS0 + (4 * (n))) +#define EMIFS_CCS(n) (EMIFS_CS0_CONFIG + (4 * (n))) +#define EMIFS_ACS(n) (EMIFS_ACS0 + (4 * (n))) /* Almost all documentation for chip and board memory maps assumes * BM is clear. Most devel boards have a switch to control booting @@ -93,13 +91,13 @@ */ static inline u32 omap_cs0_phys(void) { - return (OMAP_EMIFS_CONFIG_REG & OMAP_EMIFS_CONFIG_BM) + return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM) ? OMAP_CS3_PHYS : 0; } static inline u32 omap_cs3_phys(void) { - return (OMAP_EMIFS_CONFIG_REG & OMAP_EMIFS_CONFIG_BM) + return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM) ? 0 : OMAP_CS3_PHYS; } |