summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/net/ixgbe/ixgbe.h6
-rw-r--r--drivers/net/ixgbe/ixgbe_ethtool.c21
-rw-r--r--drivers/net/ixgbe/ixgbe_main.c64
-rw-r--r--drivers/net/ixgbe/ixgbe_type.h11
4 files changed, 71 insertions, 31 deletions
diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h
index 0b54717..c26433d1 100644
--- a/drivers/net/ixgbe/ixgbe.h
+++ b/drivers/net/ixgbe/ixgbe.h
@@ -189,10 +189,11 @@ struct ixgbe_q_vector {
};
/* Helper macros to switch between ints/sec and what the register uses.
- * And yes, it's the same math going both ways.
+ * And yes, it's the same math going both ways. The lowest value
+ * supported by all of the ixgbe hardware is 8.
*/
#define EITR_INTS_PER_SEC_TO_REG(_eitr) \
- ((_eitr) ? (1000000000 / ((_eitr) * 256)) : 0)
+ ((_eitr) ? (1000000000 / ((_eitr) * 256)) : 8)
#define EITR_REG_TO_INTS_PER_SEC EITR_INTS_PER_SEC_TO_REG
#define IXGBE_DESC_UNUSED(R) \
@@ -366,5 +367,6 @@ extern void ixgbe_reset_interrupt_capability(struct ixgbe_adapter *adapter);
extern int ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter);
void ixgbe_napi_add_all(struct ixgbe_adapter *adapter);
void ixgbe_napi_del_all(struct ixgbe_adapter *adapter);
+extern void ixgbe_write_eitr(struct ixgbe_adapter *, int, u32);
#endif /* _IXGBE_H_ */
diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c
index ae38bca..3a99781 100644
--- a/drivers/net/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ixgbe/ixgbe_ethtool.c
@@ -977,40 +977,47 @@ static int ixgbe_set_coalesce(struct net_device *netdev,
struct ethtool_coalesce *ec)
{
struct ixgbe_adapter *adapter = netdev_priv(netdev);
- struct ixgbe_hw *hw = &adapter->hw;
int i;
if (ec->tx_max_coalesced_frames_irq)
adapter->tx_ring[0].work_limit = ec->tx_max_coalesced_frames_irq;
if (ec->rx_coalesce_usecs > 1) {
+ /* check the limits */
+ if ((1000000/ec->rx_coalesce_usecs > IXGBE_MAX_INT_RATE) ||
+ (1000000/ec->rx_coalesce_usecs < IXGBE_MIN_INT_RATE))
+ return -EINVAL;
+
/* store the value in ints/second */
adapter->eitr_param = 1000000/ec->rx_coalesce_usecs;
/* static value of interrupt rate */
adapter->itr_setting = adapter->eitr_param;
- /* clear the lower bit */
+ /* clear the lower bit as its used for dynamic state */
adapter->itr_setting &= ~1;
} else if (ec->rx_coalesce_usecs == 1) {
/* 1 means dynamic mode */
adapter->eitr_param = 20000;
adapter->itr_setting = 1;
} else {
- /* any other value means disable eitr, which is best
- * served by setting the interrupt rate very high */
- adapter->eitr_param = 3000000;
+ /*
+ * any other value means disable eitr, which is best
+ * served by setting the interrupt rate very high
+ */
+ adapter->eitr_param = IXGBE_MAX_INT_RATE;
adapter->itr_setting = 0;
}
for (i = 0; i < adapter->num_msix_vectors - NON_Q_VECTORS; i++) {
struct ixgbe_q_vector *q_vector = &adapter->q_vector[i];
if (q_vector->txr_count && !q_vector->rxr_count)
+ /* tx vector gets half the rate */
q_vector->eitr = (adapter->eitr_param >> 1);
else
/* rx only or mixed */
q_vector->eitr = adapter->eitr_param;
- IXGBE_WRITE_REG(hw, IXGBE_EITR(i),
- EITR_INTS_PER_SEC_TO_REG(q_vector->eitr));
+ ixgbe_write_eitr(adapter, i,
+ EITR_INTS_PER_SEC_TO_REG(q_vector->eitr));
}
return 0;
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 881bbf9..76fd5c6 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -808,10 +808,14 @@ static void ixgbe_configure_msix(struct ixgbe_adapter *adapter)
/* if this is a tx only vector halve the interrupt rate */
if (q_vector->txr_count && !q_vector->rxr_count)
q_vector->eitr = (adapter->eitr_param >> 1);
- else
+ else if (q_vector->rxr_count)
/* rx only */
q_vector->eitr = adapter->eitr_param;
+ /*
+ * since ths is initial set up don't need to call
+ * ixgbe_write_eitr helper
+ */
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EITR(v_idx),
EITR_INTS_PER_SEC_TO_REG(q_vector->eitr));
}
@@ -896,10 +900,35 @@ update_itr_done:
return retval;
}
+/**
+ * ixgbe_write_eitr - write EITR register in hardware specific way
+ * @adapter: pointer to adapter struct
+ * @v_idx: vector index into q_vector array
+ * @itr_reg: new value to be written in *register* format, not ints/s
+ *
+ * This function is made to be called by ethtool and by the driver
+ * when it needs to update EITR registers at runtime. Hardware
+ * specific quirks/differences are taken care of here.
+ */
+void ixgbe_write_eitr(struct ixgbe_adapter *adapter, int v_idx, u32 itr_reg)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
+ /* must write high and low 16 bits to reset counter */
+ itr_reg |= (itr_reg << 16);
+ } else if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
+ /*
+ * set the WDIS bit to not clear the timer bits and cause an
+ * immediate assertion of the interrupt
+ */
+ itr_reg |= IXGBE_EITR_CNT_WDIS;
+ }
+ IXGBE_WRITE_REG(hw, IXGBE_EITR(v_idx), itr_reg);
+}
+
static void ixgbe_set_itr_msix(struct ixgbe_q_vector *q_vector)
{
struct ixgbe_adapter *adapter = q_vector->adapter;
- struct ixgbe_hw *hw = &adapter->hw;
u32 new_itr;
u8 current_itr, ret_itr;
int i, r_idx, v_idx = ((void *)q_vector - (void *)(adapter->q_vector)) /
@@ -954,17 +983,13 @@ static void ixgbe_set_itr_msix(struct ixgbe_q_vector *q_vector)
if (new_itr != q_vector->eitr) {
u32 itr_reg;
+
+ /* save the algorithm value here, not the smoothed one */
+ q_vector->eitr = new_itr;
/* do an exponential smoothing */
new_itr = ((q_vector->eitr * 90)/100) + ((new_itr * 10)/100);
- q_vector->eitr = new_itr;
itr_reg = EITR_INTS_PER_SEC_TO_REG(new_itr);
- if (adapter->hw.mac.type == ixgbe_mac_82599EB)
- /* Resolution is 2 usec on 82599, so halve the rate */
- itr_reg >>= 1;
- /* must write high and low 16 bits to reset counter */
- DPRINTK(TX_ERR, DEBUG, "writing eitr(%d): %08X\n", v_idx,
- itr_reg);
- IXGBE_WRITE_REG(hw, IXGBE_EITR(v_idx), itr_reg | (itr_reg)<<16);
+ ixgbe_write_eitr(adapter, v_idx, itr_reg);
}
return;
@@ -1141,7 +1166,7 @@ static int ixgbe_clean_rxonly(struct napi_struct *napi, int budget)
/* If all Rx work done, exit the polling mode */
if (work_done < budget) {
napi_complete(napi);
- if (adapter->itr_setting & 3)
+ if (adapter->itr_setting & 1)
ixgbe_set_itr_msix(q_vector);
if (!test_bit(__IXGBE_DOWN, &adapter->state))
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, rx_ring->v_idx);
@@ -1190,7 +1215,7 @@ static int ixgbe_clean_rxonly_many(struct napi_struct *napi, int budget)
/* If all Rx work done, exit the polling mode */
if (work_done < budget) {
napi_complete(napi);
- if (adapter->itr_setting & 3)
+ if (adapter->itr_setting & 1)
ixgbe_set_itr_msix(q_vector);
if (!test_bit(__IXGBE_DOWN, &adapter->state))
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, enable_mask);
@@ -1360,7 +1385,6 @@ out:
static void ixgbe_set_itr(struct ixgbe_adapter *adapter)
{
- struct ixgbe_hw *hw = &adapter->hw;
struct ixgbe_q_vector *q_vector = adapter->q_vector;
u8 current_itr;
u32 new_itr = q_vector->eitr;
@@ -1395,15 +1419,13 @@ static void ixgbe_set_itr(struct ixgbe_adapter *adapter)
if (new_itr != q_vector->eitr) {
u32 itr_reg;
+
+ /* save the algorithm value here, not the smoothed one */
+ q_vector->eitr = new_itr;
/* do an exponential smoothing */
new_itr = ((q_vector->eitr * 90)/100) + ((new_itr * 10)/100);
- q_vector->eitr = new_itr;
itr_reg = EITR_INTS_PER_SEC_TO_REG(new_itr);
- if (adapter->hw.mac.type == ixgbe_mac_82599EB)
- /* Resolution is 2 usec on 82599, so halve the rate */
- itr_reg >>= 1;
- /* must write high and low 16 bits to reset counter */
- IXGBE_WRITE_REG(hw, IXGBE_EITR(0), itr_reg | (itr_reg)<<16);
+ ixgbe_write_eitr(adapter, 0, itr_reg);
}
return;
@@ -1701,7 +1723,7 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
0xA54F2BEC, 0xEA49AF7C, 0xE214AD3D, 0xB855AABE,
0x6A3E67EA, 0x14364D17, 0x3BED200D};
u32 fctrl, hlreg0;
- u32 reta = 0, mrqc;
+ u32 reta = 0, mrqc = 0;
u32 rdrxctl;
int rx_buf_len;
@@ -2589,7 +2611,7 @@ static int ixgbe_poll(struct napi_struct *napi, int budget)
/* If budget not fully consumed, exit the polling mode */
if (work_done < budget) {
napi_complete(napi);
- if (adapter->itr_setting & 3)
+ if (adapter->itr_setting & 1)
ixgbe_set_itr(adapter);
if (!test_bit(__IXGBE_DOWN, &adapter->state))
ixgbe_irq_enable(adapter);
diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h
index 6090593..95fc36c 100644
--- a/drivers/net/ixgbe/ixgbe_type.h
+++ b/drivers/net/ixgbe/ixgbe_type.h
@@ -98,9 +98,18 @@
#define IXGBE_EIMS_EX(_i) (0x00AA0 + (_i) * 4)
#define IXGBE_EIMC_EX(_i) (0x00AB0 + (_i) * 4)
#define IXGBE_EIAM_EX(_i) (0x00AD0 + (_i) * 4)
+/*
+ * 82598 EITR is 16 bits but set the limits based on the max
+ * supported by all ixgbe hardware. 82599 EITR is only 12 bits,
+ * with the lower 3 always zero.
+ */
+#define IXGBE_MAX_INT_RATE 488281
+#define IXGBE_MIN_INT_RATE 956
+#define IXGBE_MAX_EITR 0x00000FF8
+#define IXGBE_MIN_EITR 8
#define IXGBE_EITR(_i) (((_i) <= 23) ? (0x00820 + ((_i) * 4)) : \
(0x012300 + (((_i) - 24) * 4)))
-#define IXGBE_EITR_ITR_INT_MASK 0x00000FFF
+#define IXGBE_EITR_ITR_INT_MASK 0x00000FF8
#define IXGBE_EITR_LLI_MOD 0x00008000
#define IXGBE_EITR_CNT_WDIS 0x80000000
#define IXGBE_IVAR(_i) (0x00900 + ((_i) * 4)) /* 24 at 0x900-0x960 */
OpenPOWER on IntegriCloud