diff options
| -rw-r--r-- | drivers/char/Kconfig | 4 | ||||
| -rw-r--r-- | drivers/misc/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/net/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/serial/8250.c | 79 | ||||
| -rw-r--r-- | drivers/serial/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/serial/imx.c | 20 | ||||
| -rw-r--r-- | drivers/serial/serial_core.c | 132 | ||||
| -rw-r--r-- | include/linux/serial.h | 4 | ||||
| -rw-r--r-- | include/linux/serial_core.h | 2 |
9 files changed, 24 insertions, 223 deletions
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 7333b41..42734d3 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -896,8 +896,8 @@ source "drivers/char/pcmcia/Kconfig" config MWAVE tristate "ACP Modem (Mwave) support" - depends on X86 - select SERIAL_8250 + depends on X86 && BROKEN + select SERIAL_8250 # PLEASE DO NOT DO THIS - move this driver to drivers/serial ---help--- The ACP modem (Mwave) for Linux is a WinModem. It is composed of a kernel driver and a user level application. Together these components diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 7fc692a..dea6589 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -6,7 +6,7 @@ menu "Misc devices" config IBM_ASM tristate "Device driver for IBM RSA service processor" - depends on X86 && PCI && EXPERIMENTAL + depends on X86 && PCI && EXPERIMENTAL && BROKEN ---help--- This option enables device driver support for in-band access to the IBM RSA (Condor) service processor in eServer xSeries systems. diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index e0239a1..7d8bcb3 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -447,7 +447,7 @@ config NET_SB1250_MAC config SGI_IOC3_ETH bool "SGI IOC3 Ethernet" - depends on NET_ETHERNET && PCI && SGI_IP27 + depends on NET_ETHERNET && PCI && SGI_IP27 && BROKEN select CRC32 select MII help diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index cedb5f2..30a0a3d 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -2590,82 +2590,3 @@ module_param_array(probe_rsa, ulong, &probe_rsa_count, 0444); MODULE_PARM_DESC(probe_rsa, "Probe I/O ports for RSA"); #endif MODULE_ALIAS_CHARDEV_MAJOR(TTY_MAJOR); - -/** - * register_serial - configure a 16x50 serial port at runtime - * @req: request structure - * - * Configure the serial port specified by the request. If the - * port exists and is in use an error is returned. If the port - * is not currently in the table it is added. - * - * The port is then probed and if necessary the IRQ is autodetected - * If this fails an error is returned. - * - * On success the port is ready to use and the line number is returned. - * - * Note: this function is deprecated - use serial8250_register_port - * instead. - */ -int register_serial(struct serial_struct *req) -{ - struct uart_port port; - - port.iobase = req->port; - port.membase = req->iomem_base; - port.irq = req->irq; - port.uartclk = req->baud_base * 16; - port.fifosize = req->xmit_fifo_size; - port.regshift = req->iomem_reg_shift; - port.iotype = req->io_type; - port.flags = req->flags | UPF_BOOT_AUTOCONF; - port.mapbase = req->iomap_base; - port.dev = NULL; - - if (share_irqs) - port.flags |= UPF_SHARE_IRQ; - - if (HIGH_BITS_OFFSET) - port.iobase |= (long) req->port_high << HIGH_BITS_OFFSET; - - /* - * If a clock rate wasn't specified by the low level driver, then - * default to the standard clock rate. This should be 115200 (*16) - * and should not depend on the architecture's BASE_BAUD definition. - * However, since this API will be deprecated, it's probably a - * better idea to convert the drivers to use the new API - * (serial8250_register_port and serial8250_unregister_port). - */ - if (port.uartclk == 0) { - printk(KERN_WARNING - "Serial: registering port at [%08x,%08lx,%p] irq %d with zero baud_base\n", - port.iobase, port.mapbase, port.membase, port.irq); - printk(KERN_WARNING "Serial: see %s:%d for more information\n", - __FILE__, __LINE__); - dump_stack(); - - /* - * Fix it up for now, but this is only a temporary measure. - */ - port.uartclk = BASE_BAUD * 16; - } - - return serial8250_register_port(&port); -} -EXPORT_SYMBOL(register_serial); - -/** - * unregister_serial - remove a 16x50 serial port at runtime - * @line: serial line number - * - * Remove one serial port. This may not be called from interrupt - * context. We hand the port back to our local PM control. - * - * Note: this function is deprecated - use serial8250_unregister_port - * instead. - */ -void unregister_serial(int line) -{ - serial8250_unregister_port(line); -} -EXPORT_SYMBOL(unregister_serial); diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index d579761..74b80f7 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -830,7 +830,7 @@ config SERIAL_M32R_PLDSIO config SERIAL_TXX9 bool "TMPTX39XX/49XX SIO support" - depends HAS_TXX9_SERIAL + depends HAS_TXX9_SERIAL && BROKEN select SERIAL_CORE default y diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index 8861bcf..4c985e6 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -291,13 +291,31 @@ static unsigned int imx_tx_empty(struct uart_port *port) return USR2((u32)sport->port.membase) & USR2_TXDC ? TIOCSER_TEMT : 0; } +/* + * We have a modem side uart, so the meanings of RTS and CTS are inverted. + */ static unsigned int imx_get_mctrl(struct uart_port *port) { - return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; + struct imx_port *sport = (struct imx_port *)port; + unsigned int tmp = TIOCM_DSR | TIOCM_CAR; + + if (USR1((u32)sport->port.membase) & USR1_RTSS) + tmp |= TIOCM_CTS; + + if (UCR2((u32)sport->port.membase) & UCR2_CTS) + tmp |= TIOCM_RTS; + + return tmp; } static void imx_set_mctrl(struct uart_port *port, unsigned int mctrl) { + struct imx_port *sport = (struct imx_port *)port; + + if (mctrl & TIOCM_RTS) + UCR2((u32)sport->port.membase) |= UCR2_CTS; + else + UCR2((u32)sport->port.membase) &= ~UCR2_CTS; } /* diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index ac3a0bf..dea156a 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -2289,143 +2289,11 @@ int uart_match_port(struct uart_port *port1, struct uart_port *port2) } EXPORT_SYMBOL(uart_match_port); -/* - * Try to find an unused uart_state slot for a port. - */ -static struct uart_state * -uart_find_match_or_unused(struct uart_driver *drv, struct uart_port *port) -{ - int i; - - /* - * First, find a port entry which matches. Note: if we do - * find a matching entry, and it has a non-zero use count, - * then we can't register the port. - */ - for (i = 0; i < drv->nr; i++) - if (uart_match_port(drv->state[i].port, port)) - return &drv->state[i]; - - /* - * We didn't find a matching entry, so look for the first - * free entry. We look for one which hasn't been previously - * used (indicated by zero iobase). - */ - for (i = 0; i < drv->nr; i++) - if (drv->state[i].port->type == PORT_UNKNOWN && - drv->state[i].port->iobase == 0 && - drv->state[i].count == 0) - return &drv->state[i]; - - /* - * That also failed. Last resort is to find any currently - * entry which doesn't have a real port associated with it. - */ - for (i = 0; i < drv->nr; i++) - if (drv->state[i].port->type == PORT_UNKNOWN && - drv->state[i].count == 0) - return &drv->state[i]; - - return NULL; -} - -/** - * uart_register_port: register uart settings with a port - * @drv: pointer to the uart low level driver structure for this port - * @port: uart port structure describing the port - * - * Register UART settings with the specified low level driver. Detect - * the type of the port if UPF_BOOT_AUTOCONF is set, and detect the - * IRQ if UPF_AUTO_IRQ is set. - * - * We try to pick the same port for the same IO base address, so that - * when a modem is plugged in, unplugged and plugged back in, it gets - * allocated the same port. - * - * Returns negative error, or positive line number. - */ -int uart_register_port(struct uart_driver *drv, struct uart_port *port) -{ - struct uart_state *state; - int ret; - - down(&port_sem); - - state = uart_find_match_or_unused(drv, port); - - if (state) { - /* - * Ok, we've found a line that we can use. - * - * If we find a port that matches this one, and it appears - * to be in-use (even if it doesn't have a type) we shouldn't - * alter it underneath itself - the port may be open and - * trying to do useful work. - */ - if (uart_users(state) != 0) { - ret = -EBUSY; - goto out; - } - - /* - * If the port is already initialised, don't touch it. - */ - if (state->port->type == PORT_UNKNOWN) { - state->port->iobase = port->iobase; - state->port->membase = port->membase; - state->port->irq = port->irq; - state->port->uartclk = port->uartclk; - state->port->fifosize = port->fifosize; - state->port->regshift = port->regshift; - state->port->iotype = port->iotype; - state->port->flags = port->flags; - state->port->line = state - drv->state; - state->port->mapbase = port->mapbase; - - uart_configure_port(drv, state, state->port); - } - - ret = state->port->line; - } else - ret = -ENOSPC; - out: - up(&port_sem); - return ret; -} - -/** - * uart_unregister_port - de-allocate a port - * @drv: pointer to the uart low level driver structure for this port - * @line: line index previously returned from uart_register_port() - * - * Hang up the specified line associated with the low level driver, - * and mark the port as unused. - */ -void uart_unregister_port(struct uart_driver *drv, int line) -{ - struct uart_state *state; - - if (line < 0 || line >= drv->nr) { - printk(KERN_ERR "Attempt to unregister "); - printk("%s%d", drv->dev_name, line); - printk("\n"); - return; - } - - state = drv->state + line; - - down(&port_sem); - uart_unconfigure_port(drv, state); - up(&port_sem); -} - EXPORT_SYMBOL(uart_write_wakeup); EXPORT_SYMBOL(uart_register_driver); EXPORT_SYMBOL(uart_unregister_driver); EXPORT_SYMBOL(uart_suspend_port); EXPORT_SYMBOL(uart_resume_port); -EXPORT_SYMBOL(uart_register_port); -EXPORT_SYMBOL(uart_unregister_port); EXPORT_SYMBOL(uart_add_one_port); EXPORT_SYMBOL(uart_remove_one_port); diff --git a/include/linux/serial.h b/include/linux/serial.h index 9f2d852..12cd9cf6 100644 --- a/include/linux/serial.h +++ b/include/linux/serial.h @@ -176,10 +176,6 @@ struct serial_icounter_struct { #ifdef __KERNEL__ #include <linux/compiler.h> -/* Export to allow PCMCIA to use this - Dave Hinds */ -extern int __deprecated register_serial(struct serial_struct *req); -extern void __deprecated unregister_serial(int line); - /* Allow architectures to override entries in serial8250_ports[] at run time: */ struct uart_port; /* forward declaration */ extern int early_serial_setup(struct uart_port *port); diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 1c53302..cf0f64e 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -360,8 +360,6 @@ struct tty_driver *uart_console_device(struct console *co, int *index); */ int uart_register_driver(struct uart_driver *uart); void uart_unregister_driver(struct uart_driver *uart); -void __deprecated uart_unregister_port(struct uart_driver *reg, int line); -int __deprecated uart_register_port(struct uart_driver *reg, struct uart_port *port); int uart_add_one_port(struct uart_driver *reg, struct uart_port *port); int uart_remove_one_port(struct uart_driver *reg, struct uart_port *port); int uart_match_port(struct uart_port *port1, struct uart_port *port2); |
