summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--arch/powerpc/kernel/Makefile9
-rw-r--r--arch/powerpc/kernel/legacy_serial.c478
-rw-r--r--arch/powerpc/kernel/pci_64.c15
-rw-r--r--arch/powerpc/kernel/setup-common.c123
-rw-r--r--arch/powerpc/kernel/setup_32.c8
-rw-r--r--arch/powerpc/kernel/setup_64.c190
-rw-r--r--arch/powerpc/kernel/udbg.c2
-rw-r--r--arch/powerpc/kernel/udbg_16550.c63
-rw-r--r--arch/powerpc/platforms/maple/setup.c14
-rw-r--r--arch/powerpc/platforms/pseries/lpar.c68
-rw-r--r--arch/powerpc/platforms/pseries/setup.c14
-rw-r--r--arch/ppc/kernel/pci.c3
-rw-r--r--include/asm-powerpc/pci-bridge.h3
-rw-r--r--include/asm-powerpc/serial.h2
-rw-r--r--include/asm-powerpc/udbg.h5
15 files changed, 607 insertions, 390 deletions
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index aab0ae3..bf3fd6f 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -33,10 +33,6 @@ obj-$(CONFIG_LPARCFG) += lparcfg.o
obj-$(CONFIG_IBMVIO) += vio.o
obj-$(CONFIG_IBMEBUS) += ibmebus.o
obj-$(CONFIG_GENERIC_TBSYNC) += smp-tbsync.o
-obj-$(CONFIG_PPC_PSERIES) += udbg_16550.o
-obj-$(CONFIG_PPC_MAPLE) += udbg_16550.o
-udbgscc-$(CONFIG_PPC64) := udbg_scc.o
-obj-$(CONFIG_PPC_PMAC) += $(udbgscc-y)
obj64-$(CONFIG_PPC_MULTIPLATFORM) += nvram_64.o
ifeq ($(CONFIG_PPC_MERGE),y)
@@ -59,14 +55,15 @@ obj-$(CONFIG_BOOTX_TEXT) += btext.o
obj-$(CONFIG_6xx) += idle_6xx.o
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_KPROBES) += kprobes.o
-
+obj-$(CONFIG_PPC_MULTIPLATFORM) += legacy_serial.o
+obj64-$(CONFIG_PPC_MULTIPLATFORM) += udbg_16550.o
+obj64-$(CONFIG_PPC_PMAC) += udbg_scc.o
module-$(CONFIG_PPC64) += module_64.o
obj-$(CONFIG_MODULES) += $(module-y)
pci64-$(CONFIG_PPC64) += pci_64.o pci_dn.o pci_iommu.o \
pci_direct_iommu.o iomap.o
obj-$(CONFIG_PCI) += $(pci64-y)
-
kexec-$(CONFIG_PPC64) := machine_kexec_64.o
kexec-$(CONFIG_PPC32) := machine_kexec_32.o
obj-$(CONFIG_KEXEC) += machine_kexec.o $(kexec-y)
diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
new file mode 100644
index 0000000..28ad50e
--- /dev/null
+++ b/arch/powerpc/kernel/legacy_serial.c
@@ -0,0 +1,478 @@
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_core.h>
+#include <linux/console.h>
+#include <linux/pci.h>
+#include <asm/io.h>
+#include <asm/mmu.h>
+#include <asm/prom.h>
+#include <asm/serial.h>
+#include <asm/udbg.h>
+#include <asm/pci-bridge.h>
+#include <asm/ppc-pci.h>
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(fmt...) do { printk(fmt); } while(0)
+#else
+#define DBG(fmt...) do { } while(0)
+#endif
+
+#define MAX_LEGACY_SERIAL_PORTS 8
+
+static struct plat_serial8250_port
+legacy_serial_ports[MAX_LEGACY_SERIAL_PORTS+1];
+static struct legacy_serial_info {
+ struct device_node *np;
+ unsigned int speed;
+ unsigned int clock;
+ phys_addr_t taddr;
+} legacy_serial_infos[MAX_LEGACY_SERIAL_PORTS];
+static unsigned int legacy_serial_count;
+static int legacy_serial_console = -1;
+
+static int __init add_legacy_port(struct device_node *np, int want_index,
+ int iotype, phys_addr_t base,
+ phys_addr_t taddr, unsigned long irq)
+{
+ u32 *clk, *spd, clock;
+ int index;
+
+ /* get clock freq. if present */
+ clk = (u32 *)get_property(np, "clock-frequency", NULL);
+ clock = clk ? *clk : BASE_BAUD * 16;
+
+ /* get default speed if present */
+ spd = (u32 *)get_property(np, "current-speed", NULL);
+
+ /* If we have a location index, then try to use it */
+ if (want_index >= 0 && want_index < MAX_LEGACY_SERIAL_PORTS)
+ index = want_index;
+ else
+ index = legacy_serial_count;
+
+ /* if our index is still out of range, that mean that
+ * array is full, we could scan for a free slot but that
+ * make little sense to bother, just skip the port
+ */
+ if (index >= MAX_LEGACY_SERIAL_PORTS)
+ return -1;
+ if (index >= legacy_serial_count)
+ legacy_serial_count = index + 1;
+
+ /* Check if there is a port who already claimed our slot */
+ if (legacy_serial_infos[index].np != 0) {
+ /* if we still have some room, move it, else override */
+ if (legacy_serial_count < MAX_LEGACY_SERIAL_PORTS) {
+ printk(KERN_INFO "Moved legacy port %d -> %d\n",
+ index, legacy_serial_count);
+ legacy_serial_ports[legacy_serial_count] =
+ legacy_serial_ports[index];
+ legacy_serial_infos[legacy_serial_count] =
+ legacy_serial_infos[index];
+ legacy_serial_count++;
+ } else {
+ printk(KERN_INFO "Replacing legacy port %d\n", index);
+ }
+ }
+
+ /* Now fill the entry */
+ memset(&legacy_serial_ports[index], 0,
+ sizeof(struct plat_serial8250_port));
+ if (iotype == UPIO_PORT)
+ legacy_serial_ports[index].iobase = base;
+ else
+ legacy_serial_ports[index].membase = (void __iomem *)base;
+ legacy_serial_ports[index].iotype = iotype;
+ legacy_serial_ports[index].uartclk = clock;
+ legacy_serial_ports[index].irq = irq;
+ legacy_serial_ports[index].flags = ASYNC_BOOT_AUTOCONF;
+ legacy_serial_infos[index].taddr = taddr;
+ legacy_serial_infos[index].np = of_node_get(np);
+ legacy_serial_infos[index].clock = clock;
+ legacy_serial_infos[index].speed = spd ? *spd : 0;
+
+ printk(KERN_INFO "Found legacy serial port %d for %s\n",
+ index, np->full_name);
+ printk(KERN_INFO " %s=%llx, taddr=%llx, irq=%lx, clk=%d, speed=%d\n",
+ (iotype == UPIO_PORT) ? "port" : "mem",
+ (unsigned long long)base, (unsigned long long)taddr, irq,
+ legacy_serial_ports[index].uartclk,
+ legacy_serial_infos[index].speed);
+
+ return index;
+}
+
+static int __init add_legacy_isa_port(struct device_node *np,
+ struct device_node *isa_bridge)
+{
+ u32 *reg;
+ char *typep;
+ int index = -1;
+ phys_addr_t taddr;
+
+ /* Get the ISA port number */
+ reg = (u32 *)get_property(np, "reg", NULL);
+ if (reg == NULL)
+ return -1;
+
+ /* Verify it's an IO port, we don't support anything else */
+ if (!(reg[0] & 0x00000001))
+ return -1;
+
+ /* Now look for an "ibm,aix-loc" property that gives us ordering
+ * if any...
+ */
+ typep = (char *)get_property(np, "ibm,aix-loc", NULL);
+
+ /* If we have a location index, then use it */
+ if (typep && *typep == 'S')
+ index = simple_strtol(typep+1, NULL, 0) - 1;
+
+ /* Translate ISA address */
+ taddr = of_translate_address(np, reg);
+
+ /* Add port, irq will be dealt with later */
+ return add_legacy_port(np, index, UPIO_PORT, reg[1], taddr, NO_IRQ);
+
+}
+
+static int __init add_legacy_pci_port(struct device_node *np,
+ struct device_node *pci_dev)
+{
+ phys_addr_t addr, base;
+ u32 *addrp;
+ int iotype, index = -1;
+
+#if 0
+ /* We only support ports that have a clock frequency properly
+ * encoded in the device-tree (that is have an fcode). Anything
+ * else can't be used that early and will be normally probed by
+ * the generic 8250_pci driver later on.
+ */
+ if (get_property(np, "clock-frequency", NULL) == NULL)
+ return -1;
+#endif
+
+ /* Get the PCI address. Assume BAR 0 */
+ addrp = of_get_pci_address(pci_dev, 0, NULL);
+ if (addrp == NULL)
+ return -1;
+
+ /* We only support BAR 0 for now */
+ iotype = (addrp[0] & 0x02000000) ? UPIO_MEM : UPIO_PORT;
+ addr = of_translate_address(pci_dev, addrp);
+
+ /* Set the IO base to the same as the translated address for MMIO,
+ * or to the domain local IO base for PIO (it will be fixed up later)
+ */
+ if (iotype == UPIO_MEM)
+ base = addr;
+ else
+ base = addrp[2];
+
+ /* Try to guess an index... If we have subdevices of the pci dev,
+ * we get to their "reg" property
+ */
+ if (np != pci_dev) {
+ u32 *reg = (u32 *)get_property(np, "reg", NULL);
+ if (reg && (*reg < 4))
+ index = legacy_serial_count + *reg;
+ }
+
+ /* Add port, irq will be dealt with later. We passed a translated
+ * IO port value. It will be fixed up later along with the irq
+ */
+ return add_legacy_port(np, index, iotype, base, addr, NO_IRQ);
+}
+
+/*
+ * This is called very early, as part of setup_system() or eventually
+ * setup_arch(), basically before anything else in this file. This function
+ * will try to build a list of all the available 8250-compatible serial ports
+ * in the machine using the Open Firmware device-tree. It currently only deals
+ * with ISA and PCI busses but could be extended. It allows a very early boot
+ * console to be initialized, that list is also used later to provide 8250 with
+ * the machine non-PCI ports and to properly pick the default console port
+ */
+void __init find_legacy_serial_ports(void)
+{
+ struct device_node *np, *stdout;
+ char *path;
+ int index;
+
+ DBG(" -> find_legacy_serial_port()\n");
+
+ /* Now find out if one of these is out firmware console */
+ path = (char *)get_property(of_chosen, "linux,stdout-path", NULL);
+ if (path == NULL) {
+ DBG(" no linux,stdout-path !\n");
+ return;
+ }
+ stdout = of_find_node_by_path(path);
+ if (stdout) {
+ DBG("stdout is %s\n", stdout->full_name);
+ }
+
+ /* First fill our array with ISA ports */
+ for (np = NULL; (np = of_find_node_by_type(np, "serial"));) {
+ struct device_node *isa = of_get_parent(np);
+ if (isa && !strcmp(isa->name, "isa")) {
+ index = add_legacy_isa_port(np, isa);
+ if (index >= 0 && np == stdout)
+ legacy_serial_console = index;
+ }
+ of_node_put(isa);
+ }
+
+ /* Next, try to locate PCI ports */
+ for (np = NULL; (np = of_find_all_nodes(np));) {
+ struct device_node *pci, *parent = of_get_parent(np);
+ if (parent && !strcmp(parent->name, "isa")) {
+ of_node_put(parent);
+ continue;
+ }
+ if (strcmp(np->name, "serial") && strcmp(np->type, "serial")) {
+ of_node_put(parent);
+ continue;
+ }
+ /* Check for known pciclass, and also check wether we have
+ * a device with child nodes for ports or not
+ */
+ if (device_is_compatible(np, "pciclass,0700") ||
+ device_is_compatible(np, "pciclass,070002"))
+ pci = np;
+ else if (device_is_compatible(parent, "pciclass,0700") ||
+ device_is_compatible(parent, "pciclass,070002"))
+ pci = parent;
+ else {
+ of_node_put(parent);
+ continue;
+ }
+ index = add_legacy_pci_port(np, pci);
+ if (index >= 0 && np == stdout)
+ legacy_serial_console = index;
+ of_node_put(parent);
+ }
+
+ DBG("legacy_serial_console = %d\n", legacy_serial_console);
+
+ /* udbg is 64 bits only for now, that will change soon though ... */
+#ifdef CONFIG_PPC64
+ while (legacy_serial_console >= 0) {
+ struct legacy_serial_info *info =
+ &legacy_serial_infos[legacy_serial_console];
+ void __iomem *addr;
+
+ if (info->taddr == 0)
+ break;
+ addr = ioremap(info->taddr, 0x1000);
+ if (addr == NULL)
+ break;
+ if (info->speed == 0)
+ info->speed = udbg_probe_uart_speed(addr, info->clock);
+ DBG("default console speed = %d\n", info->speed);
+ udbg_init_uart(addr, info->speed, info->clock);
+ break;
+ }
+#endif /* CONFIG_PPC64 */
+
+ DBG(" <- find_legacy_serial_port()\n");
+}
+
+static struct platform_device serial_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = legacy_serial_ports,
+ },
+};
+
+static void __init fixup_port_irq(int index,
+ struct device_node *np,
+ struct plat_serial8250_port *port)
+{
+ DBG("fixup_port_irq(%d)\n", index);
+
+ /* Check for interrupts in that node */
+ if (np->n_intrs > 0) {
+ port->irq = np->intrs[0].line;
+ DBG(" port %d (%s), irq=%d\n",
+ index, np->full_name, port->irq);
+ return;
+ }
+
+ /* Check for interrupts in the parent */
+ np = of_get_parent(np);
+ if (np == NULL)
+ return;
+
+ if (np->n_intrs > 0) {
+ port->irq = np->intrs[0].line;
+ DBG(" port %d (%s), irq=%d\n",
+ index, np->full_name, port->irq);
+ }
+ of_node_put(np);
+}
+
+static void __init fixup_port_pio(int index,
+ struct device_node *np,
+ struct plat_serial8250_port *port)
+{
+ struct pci_controller *hose;
+
+ DBG("fixup_port_pio(%d)\n", index);
+
+ hose = pci_find_hose_for_OF_device(np);
+ if (hose) {
+ unsigned long offset = (unsigned long)hose->io_base_virt -
+#ifdef CONFIG_PPC64
+ pci_io_base;
+#else
+ isa_io_base;
+#endif
+ DBG("port %d, IO %lx -> %lx\n",
+ index, port->iobase, port->iobase + offset);
+ port->iobase += offset;
+ }
+}
+
+/*
+ * This is called as an arch initcall, hopefully before the PCI bus is
+ * probed and/or the 8250 driver loaded since we need to register our
+ * platform devices before 8250 PCI ones are detected as some of them
+ * must properly "override" the platform ones.
+ *
+ * This function fixes up the interrupt value for platform ports as it
+ * couldn't be done earlier before interrupt maps have been parsed. It
+ * also "corrects" the IO address for PIO ports for the same reason,
+ * since earlier, the PHBs virtual IO space wasn't assigned yet. It then
+ * registers all those platform ports for use by the 8250 driver when it
+ * finally loads.
+ */
+static int __init serial_dev_init(void)
+{
+ int i;
+
+ if (legacy_serial_count == 0)
+ return -ENODEV;
+
+ /*
+ * Before we register the platfrom serial devices, we need
+ * to fixup their interrutps and their IO ports.
+ */
+ DBG("Fixing serial ports interrupts and IO ports ...\n");
+
+ for (i = 0; i < legacy_serial_count; i++) {
+ struct plat_serial8250_port *port = &legacy_serial_ports[i];
+ struct device_node *np = legacy_serial_infos[i].np;
+
+ if (port->irq == NO_IRQ)
+ fixup_port_irq(i, np, port);
+ if (port->iotype == UPIO_PORT)
+ fixup_port_pio(i, np, port);
+ }
+
+ DBG("Registering platform serial ports\n");
+
+ return platform_device_register(&serial_device);
+}
+arch_initcall(serial_dev_init);
+
+
+/*
+ * This is called very early, as part of console_init() (typically just after
+ * time_init()). This function is respondible for trying to find a good
+ * default console on serial ports. It tries to match the open firmware
+ * default output with one of the available serial console drivers, either
+ * one of the platform serial ports that have been probed earlier by
+ * find_legacy_serial_ports() or some more platform specific ones.
+ */
+static int __init check_legacy_serial_console(void)
+{
+ struct device_node *prom_stdout = NULL;
+ int speed = 0, offset = 0;
+ char *name;
+ u32 *spd;
+
+ DBG(" -> check_legacy_serial_console()\n");
+
+ /* The user has requested a console so this is already set up. */
+ if (strstr(saved_command_line, "console=")) {
+ DBG(" console was specified !\n");
+ return -EBUSY;
+ }
+
+ if (!of_chosen) {
+ DBG(" of_chosen is NULL !\n");
+ return -ENODEV;
+ }
+ /* We are getting a weird phandle from OF ... */
+ /* ... So use the full path instead */
+ name = (char *)get_property(of_chosen, "linux,stdout-path", NULL);
+ if (name == NULL) {
+ DBG(" no linux,stdout-path !\n");
+ return -ENODEV;
+ }
+ prom_stdout = of_find_node_by_path(name);
+ if (!prom_stdout) {
+ DBG(" can't find stdout package %s !\n", name);
+ return -ENODEV;
+ }
+ DBG("stdout is %s\n", prom_stdout->full_name);
+
+ name = (char *)get_property(prom_stdout, "name", NULL);
+ if (!name) {
+ DBG(" stdout package has no name !\n");
+ goto not_found;
+ }
+ spd = (u32 *)get_property(prom_stdout, "current-speed", NULL);
+ if (spd)
+ speed = *spd;
+
+ if (0)
+ ;
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+ else if (strcmp(name, "serial") == 0) {
+ int i;
+ /* Look for it in probed array */
+ for (i = 0; i < legacy_serial_count; i++) {
+ if (prom_stdout != legacy_serial_infos[i].np)
+ continue;
+ offset = i;
+ speed = legacy_serial_infos[i].speed;
+ break;
+ }
+ if (i >= legacy_serial_count)
+ goto not_found;
+ }
+#endif /* CONFIG_SERIAL_8250_CONSOLE */
+#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE
+ else if (strcmp(name, "ch-a") == 0)
+ offset = 0;
+ else if (strcmp(name, "ch-b") == 0)
+ offset = 1;
+#endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */
+ else
+ goto not_found;
+ of_node_put(prom_stdout);
+
+ DBG("Found serial console at ttyS%d\n", offset);
+
+ if (speed) {
+ static char __initdata opt[16];
+ sprintf(opt, "%d", speed);
+ return add_preferred_console("ttyS", offset, opt);
+ } else
+ return add_preferred_console("ttyS", offset, NULL);
+
+ not_found:
+ DBG("No preferred console found !\n");
+ of_node_put(prom_stdout);
+ return -ENODEV;
+}
+console_initcall(check_legacy_serial_console);
+
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index 8b6008a..9a80cdf 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -1223,6 +1223,7 @@ void __devinit pcibios_fixup_device_resources(struct pci_dev *dev,
}
EXPORT_SYMBOL(pcibios_fixup_device_resources);
+
static void __devinit do_bus_setup(struct pci_bus *bus)
{
struct pci_dev *dev;
@@ -1306,6 +1307,20 @@ void pci_resource_to_user(const struct pci_dev *dev, int bar,
*end = rsrc->end + offset;
}
+struct pci_controller* pci_find_hose_for_OF_device(struct device_node* node)
+{
+ if (!have_of)
+ return NULL;
+ while(node) {
+ struct pci_controller *hose, *tmp;
+ list_for_each_entry_safe(hose, tmp, &hose_list, list_node)
+ if (hose->arch_data == node)
+ return hose;
+ node = node->parent;
+ }
+ return NULL;
+}
+
#endif /* CONFIG_PPC_MULTIPLATFORM */
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 6088a39..a6d8aeb 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -294,129 +294,6 @@ struct seq_operations cpuinfo_op = {
.show = show_cpuinfo,
};
-#ifdef CONFIG_PPC_MULTIPLATFORM
-static int __init set_preferred_console(void)
-{
- struct device_node *prom_stdout = NULL;
- char *name;
- u32 *spd;
- int offset = 0;
-
- DBG(" -> set_preferred_console()\n");
-
- /* The user has requested a console so this is already set up. */
- if (strstr(saved_command_line, "console=")) {
- DBG(" console was specified !\n");
- return -EBUSY;
- }
-
- if (!of_chosen) {
- DBG(" of_chosen is NULL !\n");
- return -ENODEV;
- }
- /* We are getting a weird phandle from OF ... */
- /* ... So use the full path instead */
- name = (char *)get_property(of_chosen, "linux,stdout-path", NULL);
- if (name == NULL) {
- DBG(" no linux,stdout-path !\n");
- return -ENODEV;
- }
- prom_stdout = of_find_node_by_path(name);
- if (!prom_stdout) {
- DBG(" can't find stdout package %s !\n", name);
- return -ENODEV;
- }
- DBG("stdout is %s\n", prom_stdout->full_name);
-
- name = (char *)get_property(prom_stdout, "name", NULL);
- if (!name) {
- DBG(" stdout package has no name !\n");
- goto not_found;
- }
- spd = (u32 *)get_property(prom_stdout, "current-speed", NULL);
-
- if (0)
- ;
-#ifdef CONFIG_SERIAL_8250_CONSOLE
- else if (strcmp(name, "serial") == 0) {
- int i;
- u32 *reg = (u32 *)get_property(prom_stdout, "reg", &i);
- if (i > 8) {
- switch (reg[1]) {
- case 0x3f8:
- offset = 0;
- break;
- case 0x2f8:
- offset = 1;
- break;
- case 0x898:
- offset = 2;
- break;
- case 0x890:
- offset = 3;
- break;
- default:
- /* We dont recognise the serial port */
- goto not_found;
- }
- }
- }
-#endif /* CONFIG_SERIAL_8250_CONSOLE */
-#ifdef CONFIG_PPC_PSERIES
- else if (strcmp(name, "vty") == 0) {
- u32 *reg = (u32 *)get_property(prom_stdout, "reg", NULL);
- char *compat = (char *)get_property(prom_stdout, "compatible", NULL);
-
- if (reg && compat && (strcmp(compat, "hvterm-protocol") == 0)) {
- /* Host Virtual Serial Interface */
- switch (reg[0]) {
- case 0x30000000:
- offset = 0;
- break;
- case 0x30000001:
- offset = 1;
- break;
- default:
- goto not_found;
- }
- of_node_put(prom_stdout);
- DBG("Found hvsi console at offset %d\n", offset);
- return add_preferred_console("hvsi", offset, NULL);
- } else {
- /* pSeries LPAR virtual console */
- of_node_put(prom_stdout);
- DBG("Found hvc console\n");
- return add_preferred_console("hvc", 0, NULL);
- }
- }
-#endif /* CONFIG_PPC_PSERIES */
-#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE
- else if (strcmp(name, "ch-a") == 0)
- offset = 0;
- else if (strcmp(name, "ch-b") == 0)
- offset = 1;
-#endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */
- else
- goto not_found;
- of_node_put(prom_stdout);
-
- DBG("Found serial console at ttyS%d\n", offset);
-
- if (spd) {
- static char __initdata opt[16];
- sprintf(opt, "%d", *spd);
- return add_preferred_console("ttyS", offset, opt);
- } else
- return add_preferred_console("ttyS", offset, NULL);
-
- not_found:
- DBG("No preferred console found !\n");
- of_node_put(prom_stdout);
- return -ENODEV;
-}
-console_initcall(set_preferred_console);
-#endif /* CONFIG_PPC_MULTIPLATFORM */
-
void __init check_for_initrd(void)
{
#ifdef CONFIG_BLK_DEV_INITRD
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index e569433..02baacf 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -39,6 +39,7 @@
#include <asm/nvram.h>
#include <asm/xmon.h>
#include <asm/time.h>
+#include <asm/serial.h>
#include "setup.h"
@@ -282,6 +283,13 @@ void __init setup_arch(char **cmdline_p)
unflatten_device_tree();
check_for_initrd();
+
+ if (ppc_md.init_early)
+ ppc_md.init_early();
+
+#ifdef CONFIG_PPC_MULTIPLATFORM
+ find_legacy_serial_ports();
+#endif
finish_device_tree();
smp_setup_cpu_maps();
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index e3fb783..0fc442a 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -459,6 +459,15 @@ void __init setup_system(void)
*/
ppc_md.init_early();
+ /*
+ * We can discover serial ports now since the above did setup the
+ * hash table management for us, thus ioremap works. We do that early
+ * so that further code can be debugged
+ */
+#ifdef CONFIG_PPC_MULTIPLATFORM
+ find_legacy_serial_ports();
+#endif
+
/*
* "Finish" the device-tree, that is do the actual parsing of
* some of the properties like the interrupt map
@@ -657,187 +666,6 @@ void ppc64_terminate_msg(unsigned int src, const char *msg)
printk("[terminate]%04x %s\n", src, msg);
}
-#ifndef CONFIG_PPC_ISERIES
-/*
- * This function can be used by platforms to "find" legacy serial ports.
- * It works for "serial" nodes under an "isa" node, and will try to
- * respect the "ibm,aix-loc" property if any. It works with up to 8
- * ports.
- */
-
-#define MAX_LEGACY_SERIAL_PORTS 8
-static struct plat_serial8250_port serial_ports[MAX_LEGACY_SERIAL_PORTS+1];
-static unsigned int old_serial_count;
-
-void __init generic_find_legacy_serial_ports(u64 *physport,
- unsigned int *default_speed)
-{
- struct device_node *np;
- u32 *sizeprop;
-
- struct isa_reg_property {
- u32 space;
- u32 address;
- u32 size;
- };
- struct pci_reg_property {
- struct pci_address addr;
- u32 size_hi;
- u32 size_lo;
- };
-
- DBG(" -> generic_find_legacy_serial_port()\n");
-
- *physport = 0;
- if (default_speed)
- *default_speed = 0;
-
- np = of_find_node_by_path("/");
- if (!np)
- return;
-
- /* First fill our array */
- for (np = NULL; (np = of_find_node_by_type(np, "serial"));) {
- struct device_node *isa, *pci;
- struct isa_reg_property *reg;
- unsigned long phys_size, addr_size, io_base;
- u32 *rangesp;
- u32 *interrupts, *clk, *spd;
- char *typep;
- int index, rlen, rentsize;
-
- /* Ok, first check if it's under an "isa" parent */
- isa = of_get_parent(np);
- if (!isa || strcmp(isa->name, "isa")) {
- DBG("%s: no isa parent found\n", np->full_name);
- continue;
- }
-
- /* Now look for an "ibm,aix-loc" property that gives us ordering
- * if any...
- */
- typep = (char *)get_property(np, "ibm,aix-loc", NULL);
-
- /* Get the ISA port number */
- reg = (struct isa_reg_property *)get_property(np, "reg", NULL);
- if (reg == NULL)
- goto next_port;
- /* We assume the interrupt number isn't translated ... */
- interrupts = (u32 *)get_property(np, "interrupts", NULL);
- /* get clock freq. if present */
- clk = (u32 *)get_property(np, "clock-frequency", NULL);
- /* get default speed if present */
- spd = (u32 *)get_property(np, "current-speed", NULL);
- /* Default to locate at end of array */
- index = old_serial_count; /* end of the array by default */
-
- /* If we have a location index, then use it */
- if (typep && *typep == 'S') {
- index = simple_strtol(typep+1, NULL, 0) - 1;
- /* if index is out of range, use end of array instead */
- if (index >= MAX_LEGACY_SERIAL_PORTS)
- index = old_serial_count;
- /* if our index is still out of range, that mean that
- * array is full, we could scan for a free slot but that
- * make little sense to bother, just skip the port
- */
- if (index >= MAX_LEGACY_SERIAL_PORTS)
- goto next_port;
- if (index >= old_serial_count)
- old_serial_count = index + 1;
- /* Check if there is a port who already claimed our slot */
- if (serial_ports[index].iobase != 0) {
- /* if we still have some room, move it, else override */
- if (old_serial_count < MAX_LEGACY_SERIAL_PORTS) {
- DBG("Moved legacy port %d -> %d\n", index,
- old_serial_count);
- serial_ports[old_serial_count++] =
- serial_ports[index];
- } else {
- DBG("Replacing legacy port %d\n", index);
- }
- }
- }
- if (index >= MAX_LEGACY_SERIAL_PORTS)
- goto next_port;
- if (index >= old_serial_count)
- old_serial_count = index + 1;
-
- /* Now fill the entry */
- memset(&serial_ports[index], 0, sizeof(struct plat_serial8250_port));
- serial_ports[index].uartclk = clk ? *clk : BASE_BAUD * 16;
- serial_ports[index].iobase = reg->address;
- serial_ports[index].irq = interrupts ? interrupts[0] : 0;
- serial_ports[index].flags = ASYNC_BOOT_AUTOCONF;
-
- DBG("Added legacy port, index: %d, port: %x, irq: %d, clk: %d\n",
- index,
- serial_ports[index].iobase,
- serial_ports[index].irq,
- serial_ports[index].uartclk);
-
- /* Get phys address of IO reg for port 1 */
- if (index != 0)
- goto next_port;
-
- pci = of_get_parent(isa);
- if (!pci) {
- DBG("%s: no pci parent found\n", np->full_name);
- goto next_port;
- }
-
- rangesp = (u32 *)get_property(pci, "ranges", &rlen);
- if (rangesp == NULL) {
- of_node_put(pci);
- goto next_port;
- }
- rlen /= 4;
-
- /* we need the #size-cells of the PCI bridge node itself */
- phys_size = 1;
- sizeprop = (u32 *)get_property(pci, "#size-cells", NULL);
- if (sizeprop != NULL)
- phys_size = *sizeprop;
- /* we need the parent #addr-cells */
- addr_size = prom_n_addr_cells(pci);
- rentsize = 3 + addr_size + phys_size;
- io_base = 0;
- for (;rlen >= rentsize; rlen -= rentsize,rangesp += rentsize) {
- if (((rangesp[0] >> 24) & 0x3) != 1)
- continue; /* not IO space */
- io_base = rangesp[3];
- if (addr_size == 2)
- io_base = (io_base << 32) | rangesp[4];
- }
- if (io_base != 0) {
- *physport = io_base + reg->address;
- if (default_speed && spd)
- *default_speed = *spd;
- }
- of_node_put(pci);
- next_port:
- of_node_put(isa);
- }
-
- DBG(" <- generic_find_legacy_serial_port()\n");
-}
-
-static struct platform_device serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = serial_ports,
- },
-};
-
-static int __init serial_dev_init(void)
-{
- return platform_device_register(&serial_device);
-}
-arch_initcall(serial_dev_init);
-
-#endif /* CONFIG_PPC_ISERIES */
-
int check_legacy_ioport(unsigned long base_port)
{
if (ppc_md.check_legacy_ioport == NULL)
diff --git a/arch/powerpc/kernel/udbg.c b/arch/powerpc/kernel/udbg.c
index 0d878e7..2e37247 100644
--- a/arch/powerpc/kernel/udbg.c
+++ b/arch/powerpc/kernel/udbg.c
@@ -99,7 +99,7 @@ static void udbg_console_write(struct console *con, const char *s,
static struct console udbg_console = {
.name = "udbg",
.write = udbg_console_write,
- .flags = CON_PRINTBUFFER,
+ .flags = CON_PRINTBUFFER | CON_ENABLED,
.index = -1,
};
diff --git a/arch/powerpc/kernel/udbg_16550.c b/arch/powerpc/kernel/udbg_16550.c
index 9313574..50fd376 100644
--- a/arch/powerpc/kernel/udbg_16550.c
+++ b/arch/powerpc/kernel/udbg_16550.c
@@ -43,6 +43,8 @@ struct NS16550 {
#define LSR_TEMT 0x40 /* Xmitter empty */
#define LSR_ERR 0x80 /* Error */
+#define LCR_DLAB 0x80
+
static volatile struct NS16550 __iomem *udbg_comport;
static void udbg_550_putc(unsigned char c)
@@ -77,29 +79,70 @@ static unsigned char udbg_550_getc(void)
return 0;
}
-void udbg_init_uart(void __iomem *comport, unsigned int speed)
+void udbg_init_uart(void __iomem *comport, unsigned int speed,
+ unsigned int clock)
{
- u16 dll = speed ? (115200 / speed) : 12;
+ unsigned int dll, base_bauds = clock / 16;
+
+ if (speed == 0)
+ speed = 9600;
+ dll = base_bauds / speed;
if (comport) {
udbg_comport = (struct NS16550 __iomem *)comport;
out_8(&udbg_comport->lcr, 0x00);
out_8(&udbg_comport->ier, 0xff);
out_8(&udbg_comport->ier, 0x00);
- out_8(&udbg_comport->lcr, 0x80); /* Access baud rate */
- out_8(&udbg_comport->dll, dll & 0xff); /* 1 = 115200, 2 = 57600,
- 3 = 38400, 12 = 9600 baud */
- out_8(&udbg_comport->dlm, dll >> 8); /* dll >> 8 which should be zero
- for fast rates; */
- out_8(&udbg_comport->lcr, 0x03); /* 8 data, 1 stop, no parity */
- out_8(&udbg_comport->mcr, 0x03); /* RTS/DTR */
- out_8(&udbg_comport->fcr ,0x07); /* Clear & enable FIFOs */
+ out_8(&udbg_comport->lcr, LCR_DLAB);
+ out_8(&udbg_comport->dll, dll & 0xff);
+ out_8(&udbg_comport->dlm, dll >> 8);
+ /* 8 data, 1 stop, no parity */
+ out_8(&udbg_comport->lcr, 0x03);
+ /* RTS/DTR */
+ out_8(&udbg_comport->mcr, 0x03);
+ /* Clear & enable FIFOs */
+ out_8(&udbg_comport->fcr ,0x07);
udbg_putc = udbg_550_putc;
udbg_getc = udbg_550_getc;
udbg_getc_poll = udbg_550_getc_poll;
}
}
+unsigned int udbg_probe_uart_speed(void __iomem *comport, unsigned int clock)
+{
+ unsigned int dll, dlm, divisor, prescaler, speed;
+ u8 old_lcr;
+ volatile struct NS16550 __iomem *port = comport;
+
+ old_lcr = in_8(&port->lcr);
+
+ /* select divisor latch registers. */
+ out_8(&port->lcr, LCR_DLAB);
+
+ /* now, read the divisor */
+ dll = in_8(&port->dll);
+ dlm = in_8(&port->dlm);
+ divisor = dlm << 8 | dll;
+
+ /* check prescaling */
+ if (in_8(&port->mcr) & 0x80)
+ prescaler = 4;
+ else
+ prescaler = 1;
+
+ /* restore the LCR */
+ out_8(&port->lcr, old_lcr);
+
+ /* calculate speed */
+ speed = (clock / prescaler) / (divisor * 16);
+
+ /* sanity check */
+ if (speed < 9600 || speed > 115200)
+ speed = 9600;
+
+ return speed;
+}
+
#ifdef CONFIG_PPC_MAPLE
void udbg_maple_real_putc(unsigned char c)
{
diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c
index 95b2352..8724e03 100644
--- a/arch/powerpc/platforms/maple/setup.c
+++ b/arch/powerpc/platforms/maple/setup.c
@@ -192,20 +192,6 @@ static void __init maple_init_early(void)
*/
hpte_init_native();
- /* Find the serial port */
- generic_find_legacy_serial_ports(&physport, &default_speed);
-
- DBG("phys port addr: %lx\n", (long)physport);
-
- if (physport) {
- void *comport;
- /* Map the uart for udbg. */
- comport = (void *)ioremap(physport, 16);
- udbg_init_uart(comport, default_speed);
-
- DBG("Hello World !\n");
- }
-
/* Setup interrupt mapping options */
ppc64_interrupt_controller = IC_OPEN_PIC;
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index cf1bc11..cc0939d 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -24,6 +24,7 @@
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/dma-mapping.h>
+#include <linux/console.h>
#include <asm/processor.h>
#include <asm/mmu.h>
#include <asm/page.h>
@@ -191,7 +192,7 @@ static unsigned char udbg_getcLP(void)
/* call this from early_init() for a working debug console on
* vterm capable LPAR machines
*/
-void udbg_init_debug_lpar(void)
+void __init udbg_init_debug_lpar(void)
{
vtermno = 0;
udbg_putc = udbg_putcLP;
@@ -200,63 +201,54 @@ void udbg_init_debug_lpar(void)
}
/* returns 0 if couldn't find or use /chosen/stdout as console */
-int find_udbg_vterm(void)
+void __init find_udbg_vterm(void)
{
struct device_node *stdout_node;
u32 *termno;
char *name;
- int found = 0;
+ int add_console;
/* find the boot console from /chosen/stdout */
if (!of_chosen)
- return 0;
+ return;
name = (char *)get_property(of_chosen, "linux,stdout-path", NULL);
if (name == NULL)
- return 0;
+ return;
stdout_node = of_find_node_by_path(name);
if (!stdout_node)
- return 0;
-
- /* now we have the stdout node; figure out what type of device it is. */
+ return;
name = (char *)get_property(stdout_node, "name", NULL);
if (!name) {
printk(KERN_WARNING "stdout node missing 'name' property!\n");
goto out;
}
+ /* The user has requested a console so this is already set up. */
+ add_console = !strstr(cmd_line, "console=");
- if (strncmp(name, "vty", 3) == 0) {
- if (device_is_compatible(stdout_node, "hvterm1")) {
- termno = (u32 *)get_property(stdout_node, "reg", NULL);
- if (termno) {
- vtermno = termno[0];
- udbg_putc = udbg_putcLP;
- udbg_getc = udbg_getcLP;
- udbg_getc_poll = udbg_getc_pollLP;
- found = 1;
- }
- } else if (device_is_compatible(stdout_node, "hvterm-protocol")) {
- termno = (u32 *)get_property(stdout_node, "reg", NULL);
- if (termno) {
- vtermno = termno[0];
- udbg_putc = udbg_hvsi_putc;
- udbg_getc = udbg_hvsi_getc;
- udbg_getc_poll = udbg_hvsi_getc_poll;
- found = 1;
- }
- }
- } else if (strncmp(name, "serial", 6)) {
- /* XXX fix ISA serial console */
- printk(KERN_WARNING "serial stdout on LPAR ('%s')! "
- "can't print udbg messages\n",
- stdout_node->full_name);
- } else {
- printk(KERN_WARNING "don't know how to print to stdout '%s'\n",
- stdout_node->full_name);
+ /* Check if it's a virtual terminal */
+ if (strncmp(name, "vty", 3) != 0)
+ goto out;
+ termno = (u32 *)get_property(stdout_node, "reg", NULL);
+ if (termno == NULL)
+ goto out;
+ vtermno = termno[0];
+
+ if (device_is_compatible(stdout_node, "hvterm1")) {
+ udbg_putc = udbg_putcLP;
+ udbg_getc = udbg_getcLP;
+ udbg_getc_poll = udbg_getc_pollLP;
+ if (add_console)
+ add_preferred_console("hvc", termno[0] & 0xff, NULL);
+ } else if (device_is_compatible(stdout_node, "hvterm-protocol")) {
+ vtermno = termno[0];
+ udbg_putc = udbg_hvsi_putc;
+ udbg_getc = udbg_hvsi_getc;
+ udbg_getc_poll = udbg_hvsi_getc_poll;
+ if (add_console)
+ add_preferred_console("hvsi", termno[0] & 0xff, NULL);
}
-
out:
of_node_put(stdout_node);
- return found;
}
void vpa_init(int cpu)
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 8a4238a..8828dc3 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -79,8 +79,6 @@
extern void find_udbg_vterm(void);
extern void system_reset_fwnmi(void); /* from head.S */
extern void machine_check_fwnmi(void); /* from head.S */
-extern void generic_find_legacy_serial_ports(u64 *physport,
- unsigned int *default_speed);
int fwnmi_active; /* TRUE if an FWNMI handler is present */
@@ -366,10 +364,7 @@ static int pseries_set_xdabr(unsigned long dabr)
*/
static void __init pSeries_init_early(void)
{
- void *comport;
int iommu_off = 0;
- unsigned int default_speed;
- u64 physport;
DBG(" -> pSeries_init_early()\n");
@@ -383,17 +378,8 @@ static void __init pSeries_init_early(void)
get_property(of_chosen, "linux,iommu-off", NULL));
}
- generic_find_legacy_serial_ports(&physport, &default_speed);
-
if (platform_is_lpar())
find_udbg_vterm();
- else if (physport) {
- /* Map the uart for udbg. */
- comport = (void *)ioremap(physport, 16);
- udbg_init_uart(comport, default_speed);
-
- DBG("Hello World !\n");
- }
if (firmware_has_feature(FW_FEATURE_DABR))
ppc_md.set_dabr = pseries_set_dabr;
diff --git a/arch/ppc/kernel/pci.c b/arch/ppc/kernel/pci.c
index f7fae5f..0aa1841 100644
--- a/arch/ppc/kernel/pci.c
+++ b/arch/ppc/kernel/pci.c
@@ -815,8 +815,7 @@ EXPORT_SYMBOL(pci_device_to_OF_node);
* to set pci_assign_all_buses to 1 and still use RTAS for PCI
* config cycles.
*/
-struct pci_controller*
-pci_find_hose_for_OF_device(struct device_node* node)
+struct pci_controller* pci_find_hose_for_OF_device(struct device_node* node)
{
if (!have_of)
return NULL;
diff --git a/include/asm-powerpc/pci-bridge.h b/include/asm-powerpc/pci-bridge.h
index 223ec7b..89e73fc 100644
--- a/include/asm-powerpc/pci-bridge.h
+++ b/include/asm-powerpc/pci-bridge.h
@@ -140,6 +140,9 @@ static inline struct pci_controller *pci_bus_to_host(struct pci_bus *bus)
return PCI_DN(busdn)->phb;
}
+extern struct pci_controller*
+pci_find_hose_for_OF_device(struct device_node* node);
+
extern struct pci_controller *
pcibios_alloc_controller(struct device_node *dev);
extern void pcibios_free_controller(struct pci_controller *phb);
diff --git a/include/asm-powerpc/serial.h b/include/asm-powerpc/serial.h
index b273d63..6dc9546 100644
--- a/include/asm-powerpc/serial.h
+++ b/include/asm-powerpc/serial.h
@@ -15,4 +15,6 @@
/* Default baud base if not found in device-tree */
#define BASE_BAUD ( 1843200 / 16 )
+extern void find_legacy_serial_ports(void);
+
#endif /* _PPC64_SERIAL_H */
diff --git a/include/asm-powerpc/udbg.h b/include/asm-powerpc/udbg.h
index a383383..4049a96 100644
--- a/include/asm-powerpc/udbg.h
+++ b/include/asm-powerpc/udbg.h
@@ -24,7 +24,10 @@ extern int udbg_read(char *buf, int buflen);
extern void register_early_udbg_console(void);
extern void udbg_printf(const char *fmt, ...);
-extern void udbg_init_uart(void __iomem *comport, unsigned int speed);
+extern void udbg_init_uart(void __iomem *comport, unsigned int speed,
+ unsigned int clock);
+extern unsigned int udbg_probe_uart_speed(void __iomem *comport,
+ unsigned int clock);
struct device_node;
extern void udbg_init_scc(struct device_node *np);
OpenPOWER on IntegriCloud