summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/md/Kconfig14
-rw-r--r--init/do_mounts_md.c40
-rw-r--r--init/main.c2
-rw-r--r--scripts/bootgraph.pl147
4 files changed, 193 insertions, 10 deletions
diff --git a/drivers/md/Kconfig b/drivers/md/Kconfig
index 07d92c1..2281b50 100644
--- a/drivers/md/Kconfig
+++ b/drivers/md/Kconfig
@@ -30,6 +30,20 @@ config BLK_DEV_MD
If unsure, say N.
+config MD_AUTODETECT
+ bool "Autodetect RAID arrays during kernel boot"
+ depends on BLK_DEV_MD=y
+ default y
+ ---help---
+ If you say Y here, then the kernel will try to autodetect raid
+ arrays as part of its boot process.
+
+ If you don't use raid and say Y, this autodetection can cause
+ a several-second delay in the boot time due to various
+ synchronisation steps that are part of this step.
+
+ If unsure, say Y.
+
config MD_LINEAR
tristate "Linear (append) mode"
depends on BLK_DEV_MD
diff --git a/init/do_mounts_md.c b/init/do_mounts_md.c
index 693d246..48b3fad 100644
--- a/init/do_mounts_md.c
+++ b/init/do_mounts_md.c
@@ -12,7 +12,12 @@
* The code for that is here.
*/
-static int __initdata raid_noautodetect, raid_autopart;
+#ifdef CONFIG_MD_AUTODETECT
+static int __initdata raid_noautodetect;
+#else
+static int __initdata raid_noautodetect=1;
+#endif
+static int __initdata raid_autopart;
static struct {
int minor;
@@ -252,6 +257,8 @@ static int __init raid_setup(char *str)
if (!strncmp(str, "noautodetect", wlen))
raid_noautodetect = 1;
+ if (!strncmp(str, "autodetect", wlen))
+ raid_noautodetect = 0;
if (strncmp(str, "partitionable", wlen)==0)
raid_autopart = 1;
if (strncmp(str, "part", wlen)==0)
@@ -264,17 +271,32 @@ static int __init raid_setup(char *str)
__setup("raid=", raid_setup);
__setup("md=", md_setup);
+static void autodetect_raid(void)
+{
+ int fd;
+
+ /*
+ * Since we don't want to detect and use half a raid array, we need to
+ * wait for the known devices to complete their probing
+ */
+ printk(KERN_INFO "md: Waiting for all devices to be available before autodetect\n");
+ printk(KERN_INFO "md: If you don't use raid, use raid=noautodetect\n");
+ while (driver_probe_done() < 0)
+ msleep(100);
+ fd = sys_open("/dev/md0", 0, 0);
+ if (fd >= 0) {
+ sys_ioctl(fd, RAID_AUTORUN, raid_autopart);
+ sys_close(fd);
+ }
+}
+
void __init md_run_setup(void)
{
create_dev("/dev/md0", MKDEV(MD_MAJOR, 0));
+
if (raid_noautodetect)
- printk(KERN_INFO "md: Skipping autodetection of RAID arrays. (raid=noautodetect)\n");
- else {
- int fd = sys_open("/dev/md0", 0, 0);
- if (fd >= 0) {
- sys_ioctl(fd, RAID_AUTORUN, raid_autopart);
- sys_close(fd);
- }
- }
+ printk(KERN_INFO "md: Skipping autodetection of RAID arrays. (raid=autodetect will force)\n");
+ else
+ autodetect_raid();
md_setup_drive();
}
diff --git a/init/main.c b/init/main.c
index 3820323..27f6bf6 100644
--- a/init/main.c
+++ b/init/main.c
@@ -708,7 +708,7 @@ int do_one_initcall(initcall_t fn)
int result;
if (initcall_debug) {
- printk("calling %pF\n", fn);
+ printk("calling %pF @ %i\n", fn, task_pid_nr(current));
t0 = ktime_get();
}
diff --git a/scripts/bootgraph.pl b/scripts/bootgraph.pl
new file mode 100644
index 0000000..2243353
--- /dev/null
+++ b/scripts/bootgraph.pl
@@ -0,0 +1,147 @@
+#!/usr/bin/perl
+
+# Copyright 2008, Intel Corporation
+#
+# This file is part of the Linux kernel
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+#
+# Authors:
+# Arjan van de Ven <arjan@linux.intel.com>
+
+
+#
+# This script turns a dmesg output into a SVG graphic that shows which
+# functions take how much time. You can view SVG graphics with various
+# programs, including Inkscape, The Gimp and Firefox.
+#
+#
+# For this script to work, the kernel needs to be compiled with the
+# CONFIG_PRINTK_TIME configuration option enabled, and with
+# "initcall_debug" passed on the kernel command line.
+#
+# usage:
+# dmesg | perl scripts/bootgraph.pl > output.svg
+#
+
+my @rows;
+my %start, %end, %row;
+my $done = 0;
+my $rowcount = 0;
+my $maxtime = 0;
+my $firsttime = 100;
+my $count = 0;
+while (<>) {
+ my $line = $_;
+ if ($line =~ /([0-9\.]+)\] calling ([a-zA-Z0-9\_]+)\+/) {
+ my $func = $2;
+ if ($done == 0) {
+ $start{$func} = $1;
+ if ($1 < $firsttime) {
+ $firsttime = $1;
+ }
+ }
+ $row{$func} = 1;
+ if ($line =~ /\@ ([0-9]+)/) {
+ my $pid = $1;
+ if (!defined($rows[$pid])) {
+ $rowcount = $rowcount + 1;
+ $rows[$pid] = $rowcount;
+ }
+ $row{$func} = $rows[$pid];
+ }
+ $count = $count + 1;
+ }
+
+ if ($line =~ /([0-9\.]+)\] initcall ([a-zA-Z0-9\_]+)\+.*returned/) {
+ if ($done == 0) {
+ $end{$2} = $1;
+ $maxtime = $1;
+ }
+ }
+ if ($line =~ /Write protecting the/) {
+ $done = 1;
+ }
+ if ($line =~ /Freeing unused kernel memory/) {
+ $done = 1;
+ }
+}
+
+if ($count == 0) {
+ print "No data found in the dmesg. Make sure that 'printk.time=1' and\n";
+ print "'initcall_debug' are passed on the kernel command line.\n\n";
+ print "Usage: \n";
+ print " dmesg | perl scripts/bootgraph.pl > output.svg\n\n";
+ exit;
+}
+
+print "<?xml version=\"1.0\" standalone=\"no\"?> \n";
+print "<svg width=\"1000\" height=\"100%\" version=\"1.1\" xmlns=\"http://www.w3.org/2000/svg\">\n";
+
+my @styles;
+
+$styles[0] = "fill:rgb(0,0,255);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
+$styles[1] = "fill:rgb(0,255,0);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
+$styles[2] = "fill:rgb(255,0,20);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
+$styles[3] = "fill:rgb(255,255,20);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
+$styles[4] = "fill:rgb(255,0,255);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
+$styles[5] = "fill:rgb(0,255,255);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
+$styles[6] = "fill:rgb(0,128,255);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
+$styles[7] = "fill:rgb(0,255,128);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
+$styles[8] = "fill:rgb(255,0,128);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
+$styles[9] = "fill:rgb(255,255,128);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
+$styles[10] = "fill:rgb(255,128,255);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
+$styles[11] = "fill:rgb(128,255,255);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
+
+my $mult = 950.0 / ($maxtime - $firsttime);
+my $threshold = ($maxtime - $firsttime) / 60.0;
+my $stylecounter = 0;
+while (($key,$value) = each %start) {
+ my $duration = $end{$key} - $start{$key};
+
+ if ($duration >= $threshold) {
+ my $s, $s2, $e, $y;
+ $s = ($value - $firsttime) * $mult;
+ $s2 = $s + 6;
+ $e = ($end{$key} - $firsttime) * $mult;
+ $w = $e - $s;
+
+ $y = $row{$key} * 150;
+ $y2 = $y + 4;
+
+ $style = $styles[$stylecounter];
+ $stylecounter = $stylecounter + 1;
+ if ($stylecounter > 11) {
+ $stylecounter = 0;
+ };
+
+ print "<rect x=\"$s\" width=\"$w\" y=\"$y\" height=\"145\" style=\"$style\"/>\n";
+ print "<text transform=\"translate($s2,$y2) rotate(90)\">$key</text>\n";
+ }
+}
+
+
+# print the time line on top
+my $time = $firsttime;
+my $step = ($maxtime - $firsttime) / 15;
+while ($time < $maxtime) {
+ my $s2 = ($time - $firsttime) * $mult;
+ my $tm = int($time * 100) / 100.0;
+ print "<text transform=\"translate($s2,89) rotate(90)\">$tm</text>\n";
+ $time = $time + $step;
+}
+
+print "</svg>\n";
OpenPOWER on IntegriCloud