summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/feature-removal-schedule.txt9
-rw-r--r--Documentation/hwmon/f71805f56
-rw-r--r--Documentation/hwmon/it8715
-rw-r--r--Documentation/hwmon/k8temp2
-rw-r--r--Documentation/hwmon/pc8742738
-rw-r--r--Documentation/hwmon/sysfs-interface4
-rw-r--r--Documentation/hwmon/w83627ehf2
-rw-r--r--Documentation/hwmon/w83791d2
-rw-r--r--Documentation/hwmon/w83793110
-rw-r--r--MAINTAINERS15
-rw-r--r--drivers/hwmon/Kconfig56
-rw-r--r--drivers/hwmon/Makefile3
-rw-r--r--drivers/hwmon/ams/Makefile8
-rw-r--r--drivers/hwmon/ams/ams-core.c265
-rw-r--r--drivers/hwmon/ams/ams-i2c.c299
-rw-r--r--drivers/hwmon/ams/ams-input.c160
-rw-r--r--drivers/hwmon/ams/ams-pmu.c207
-rw-r--r--drivers/hwmon/ams/ams.h72
-rw-r--r--drivers/hwmon/f71805f.c569
-rw-r--r--drivers/hwmon/hdaps.c68
-rw-r--r--drivers/hwmon/hwmon-vid.c4
-rw-r--r--drivers/hwmon/it87.c202
-rw-r--r--drivers/hwmon/k8temp.c4
-rw-r--r--drivers/hwmon/pc87360.c2
-rw-r--r--drivers/hwmon/pc87427.c627
-rw-r--r--drivers/hwmon/w83627ehf.c2
-rw-r--r--drivers/hwmon/w83792d.c2
-rw-r--r--drivers/hwmon/w83793.c1609
-rw-r--r--drivers/i2c/busses/i2c-ali1563.c2
-rw-r--r--include/linux/i2c-id.h1
30 files changed, 4115 insertions, 300 deletions
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 64ce44d..040f437 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -151,15 +151,6 @@ Who: Thomas Gleixner <tglx@linutronix.de>
---------------------------
-What: I2C interface of the it87 driver
-When: January 2007
-Why: The ISA interface is faster and should be always available. The I2C
- probing is also known to cause trouble in at least one case (see
- bug #5889.)
-Who: Jean Delvare <khali@linux-fr.org>
-
----------------------------
-
What: Unused EXPORT_SYMBOL/EXPORT_SYMBOL_GPL exports
(temporary transition config option provided until then)
The transition config option will also be removed at the same time.
diff --git a/Documentation/hwmon/f71805f b/Documentation/hwmon/f71805f
index 2ca69df..bfd0f15 100644
--- a/Documentation/hwmon/f71805f
+++ b/Documentation/hwmon/f71805f
@@ -6,6 +6,10 @@ Supported chips:
Prefix: 'f71805f'
Addresses scanned: none, address read from Super I/O config space
Datasheet: Provided by Fintek on request
+ * Fintek F71872F/FG
+ Prefix: 'f71872f'
+ Addresses scanned: none, address read from Super I/O config space
+ Datasheet: Provided by Fintek on request
Author: Jean Delvare <khali@linux-fr.org>
@@ -13,8 +17,8 @@ Thanks to Denis Kieft from Barracuda Networks for the donation of a
test system (custom Jetway K8M8MS motherboard, with CPU and RAM) and
for providing initial documentation.
-Thanks to Kris Chen from Fintek for answering technical questions and
-providing additional documentation.
+Thanks to Kris Chen and Aaron Huang from Fintek for answering technical
+questions and providing additional documentation.
Thanks to Chris Lin from Jetway for providing wiring schematics and
answering technical questions.
@@ -28,8 +32,11 @@ capabilities. It can monitor up to 9 voltages (counting its own power
source), 3 fans and 3 temperature sensors.
This chip also has fan controlling features, using either DC or PWM, in
-three different modes (one manual, two automatic). The driver doesn't
-support these features yet.
+three different modes (one manual, two automatic).
+
+The Fintek F71872F/FG Super I/O chip is almost the same, with two
+additional internal voltages monitored (VSB and battery). It also features
+6 VID inputs. The VID inputs are not yet supported by this driver.
The driver assumes that no more than one chip is present, which seems
reasonable.
@@ -42,7 +49,8 @@ Voltages are sampled by an 8-bit ADC with a LSB of 8 mV. The supported
range is thus from 0 to 2.040 V. Voltage values outside of this range
need external resistors. An exception is in0, which is used to monitor
the chip's own power source (+3.3V), and is divided internally by a
-factor 2.
+factor 2. For the F71872F/FG, in9 (VSB) and in10 (battery) are also
+divided internally by a factor 2.
The two LSB of the voltage limit registers are not used (always 0), so
you can only set the limits in steps of 32 mV (before scaling).
@@ -61,9 +69,12 @@ in5 VIN5 +12V 200K 20K 11.00 1.05 V
in6 VIN6 VCC1.5V 10K - 1.00 1.50 V
in7 VIN7 VCORE 10K - 1.00 ~1.40 V (1)
in8 VIN8 VSB5V 200K 47K 1.00 0.95 V
+in10 VSB VSB3.3V int. int. 2.00 1.65 V (3)
+in9 VBAT VBATTERY int. int. 2.00 1.50 V (3)
(1) Depends on your hardware setup.
(2) Obviously not correct, swapping R1 and R2 would make more sense.
+(3) F71872F/FG only.
These values can be used as hints at best, as motherboard manufacturers
are free to use a completely different setup. As a matter of fact, the
@@ -103,3 +114,38 @@ sensor. Each channel can be used for connecting either a thermal diode
or a thermistor. The driver reports the currently selected mode, but
doesn't allow changing it. In theory, the BIOS should have configured
everything properly.
+
+
+Fan Control
+-----------
+
+Both PWM (pulse-width modulation) and DC fan speed control methods are
+supported. The right one to use depends on external circuitry on the
+motherboard, so the driver assumes that the BIOS set the method
+properly. The driver will report the method, but won't let you change
+it.
+
+When the PWM method is used, you can select the operating frequency,
+from 187.5 kHz (default) to 31 Hz. The best frequency depends on the
+fan model. As a rule of thumb, lower frequencies seem to give better
+control, but may generate annoying high-pitch noise. Fintek recommends
+not going below 1 kHz, as the fan tachometers get confused by lower
+frequencies as well.
+
+When the DC method is used, Fintek recommends not going below 5 V, which
+corresponds to a pwm value of 106 for the driver. The driver doesn't
+enforce this limit though.
+
+Three different fan control modes are supported:
+
+* Manual mode
+ You ask for a specific PWM duty cycle or DC voltage.
+
+* Fan speed mode
+ You ask for a specific fan speed. This mode assumes that pwm1
+ corresponds to fan1, pwm2 to fan2 and pwm3 to fan3.
+
+* Temperature mode
+ You define 3 temperature/fan speed trip points, and the fan speed is
+ adjusted depending on the measured temperature, using interpolation.
+ This mode is not yet supported by the driver.
diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87
index e783fd6..74a8099 100644
--- a/Documentation/hwmon/it87
+++ b/Documentation/hwmon/it87
@@ -9,8 +9,7 @@ Supported chips:
http://www.ite.com.tw/
* IT8712F
Prefix: 'it8712'
- Addresses scanned: I2C 0x2d
- from Super I/O config space (8 I/O ports)
+ Addresses scanned: from Super I/O config space (8 I/O ports)
Datasheet: Publicly available at the ITE website
http://www.ite.com.tw/
* IT8716F
@@ -53,6 +52,18 @@ Module Parameters
misconfigured by BIOS - PWM values would be inverted. This option tries
to fix this. Please contact your BIOS manufacturer and ask him for fix.
+
+Hardware Interfaces
+-------------------
+
+All the chips suported by this driver are LPC Super-I/O chips, accessed
+through the LPC bus (ISA-like I/O ports). The IT8712F additionally has an
+SMBus interface to the hardware monitoring functions. This driver no
+longer supports this interface though, as it is slower and less reliable
+than the ISA access, and was only available on a small number of
+motherboard models.
+
+
Description
-----------
diff --git a/Documentation/hwmon/k8temp b/Documentation/hwmon/k8temp
index 30d123b..0005c71 100644
--- a/Documentation/hwmon/k8temp
+++ b/Documentation/hwmon/k8temp
@@ -8,7 +8,7 @@ Supported chips:
Datasheet: http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/32559.pdf
Author: Rudolf Marek
-Contact: Rudolf Marek <r.marek@sh.cvut.cz>
+Contact: Rudolf Marek <r.marek@assembler.cz>
Description
-----------
diff --git a/Documentation/hwmon/pc87427 b/Documentation/hwmon/pc87427
new file mode 100644
index 0000000..9a0708f
--- /dev/null
+++ b/Documentation/hwmon/pc87427
@@ -0,0 +1,38 @@
+Kernel driver pc87427
+=====================
+
+Supported chips:
+ * National Semiconductor PC87427
+ Prefix: 'pc87427'
+ Addresses scanned: none, address read from Super I/O config space
+ Datasheet: http://www.winbond.com.tw/E-WINBONDHTM/partner/apc_007.html
+
+Author: Jean Delvare <khali@linux-fr.org>
+
+Thanks to Amir Habibi at Candelis for setting up a test system, and to
+Michael Kress for testing several iterations of this driver.
+
+
+Description
+-----------
+
+The National Semiconductor Super I/O chip includes complete hardware
+monitoring capabilities. It can monitor up to 18 voltages, 8 fans and
+6 temperature sensors. Only the fans are supported at the moment.
+
+This chip also has fan controlling features, which are not yet supported
+by this driver either.
+
+The driver assumes that no more than one chip is present, which seems
+reasonable.
+
+
+Fan Monitoring
+--------------
+
+Fan rotation speeds are reported as 14-bit values from a gated clock
+signal. Speeds down to 83 RPM can be measured.
+
+An alarm is triggered if the rotation speed drops below a programmable
+limit. Another alarm is triggered if the speed is too low to to be measured
+(including stalled or missing fan).
diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface
index d1d390a..efef3b9 100644
--- a/Documentation/hwmon/sysfs-interface
+++ b/Documentation/hwmon/sysfs-interface
@@ -208,12 +208,14 @@ temp[1-*]_auto_point[1-*]_temp_hyst
****************
temp[1-*]_type Sensor type selection.
- Integers 1 to 4 or thermistor Beta value (typically 3435)
+ Integers 1 to 6 or thermistor Beta value (typically 3435)
RW
1: PII/Celeron Diode
2: 3904 transistor
3: thermal diode
4: thermistor (default/unknown Beta)
+ 5: AMD AMDSI
+ 6: Intel PECI
Not all types are supported by all chips
temp[1-*]_max Temperature max value.
diff --git a/Documentation/hwmon/w83627ehf b/Documentation/hwmon/w83627ehf
index caa610a..8a15a74 100644
--- a/Documentation/hwmon/w83627ehf
+++ b/Documentation/hwmon/w83627ehf
@@ -10,7 +10,7 @@ Supported chips:
Authors:
Jean Delvare <khali@linux-fr.org>
Yuan Mu (Winbond)
- Rudolf Marek <r.marek@sh.cvut.cz>
+ Rudolf Marek <r.marek@assembler.cz>
Description
-----------
diff --git a/Documentation/hwmon/w83791d b/Documentation/hwmon/w83791d
index 19b2ed7..db9881d 100644
--- a/Documentation/hwmon/w83791d
+++ b/Documentation/hwmon/w83791d
@@ -18,7 +18,7 @@ Credits:
and Mark Studebaker <mdsxyz123@yahoo.com>
w83792d.c:
Chunhao Huang <DZShen@Winbond.com.tw>,
- Rudolf Marek <r.marek@sh.cvut.cz>
+ Rudolf Marek <r.marek@assembler.cz>
Additional contributors:
Sven Anders <anders@anduras.de>
diff --git a/Documentation/hwmon/w83793 b/Documentation/hwmon/w83793
new file mode 100644
index 0000000..45e5408
--- /dev/null
+++ b/Documentation/hwmon/w83793
@@ -0,0 +1,110 @@
+Kernel driver w83793
+====================
+
+Supported chips:
+ * Winbond W83793G/W83793R
+ Prefix: 'w83793'
+ Addresses scanned: I2C 0x2c - 0x2f
+ Datasheet: Still not published
+
+Authors:
+ Yuan Mu (Winbond Electronics)
+ Rudolf Marek <r.marek@assembler.cz>
+
+
+Module parameters
+-----------------
+
+* reset int
+ (default 0)
+ This parameter is not recommended, it will lose motherboard specific
+ settings. Use 'reset=1' to reset the chip when loading this module.
+
+* force_subclients=bus,caddr,saddr1,saddr2
+ This is used to force the i2c addresses for subclients of
+ a certain chip. Typical usage is `force_subclients=0,0x2f,0x4a,0x4b'
+ to force the subclients of chip 0x2f on bus 0 to i2c addresses
+ 0x4a and 0x4b.
+
+
+Description
+-----------
+
+This driver implements support for Winbond W83793G/W83793R chips.
+
+* Exported features
+ This driver exports 10 voltage sensors, up to 12 fan tachometer inputs,
+ 6 remote temperatures, up to 8 sets of PWM fan controls, SmartFan
+ (automatic fan speed control) on all temperature/PWM combinations, 2
+ sets of 6-pin CPU VID input.
+
+* Sensor resolutions
+ If your motherboard maker used the reference design, the resolution of
+ voltage0-2 is 2mV, resolution of voltage3/4/5 is 16mV, 8mV for voltage6,
+ 24mV for voltage7/8. Temp1-4 have a 0.25 degree Celsius resolution,
+ temp5-6 have a 1 degree Celsiis resolution.
+
+* Temperature sensor types
+ Temp1-4 have 3 possible types. It can be read from (and written to)
+ temp[1-4]_type.
+ - If the value of 0, the related temperature channel stops
+ monitoring.
+ - If the value is 3, it starts monitoring using a remote termal diode
+ (default).
+ - If the value is 5, it starts monitoring using the temperature sensor
+ in AMD CPU and get result by AMDSI.
+ - If the value is 6, it starts monitoring using the temperature sensor
+ in Intel CPU and get result by PECI.
+ Temp5-6 can be connected to external thermistors (value of
+ temp[5-6]_type is 4). They can also be disabled (value is 0).
+
+* Alarm mechanism
+ For voltage sensors, an alarm triggers if the measured value is below
+ the low voltage limit or over the high voltage limit.
+ For temperature sensors, an alarm triggers if the measured value goes
+ above the high temperature limit, and wears off only after the measured
+ value drops below the hysteresis value.
+ For fan sensors, an alarm triggers if the measured value is below the
+ low speed limit.
+
+* SmartFan/PWM control
+ If you want to set a pwm fan to manual mode, you just need to make sure it
+ is not controlled by any temp channel, for example, you want to set fan1
+ to manual mode, you need to check the value of temp[1-6]_fan_map, make
+ sure bit 0 is cleared in the 6 values. And then set the pwm1 value to
+ control the fan.
+
+ Each temperature channel can control all the 8 PWM outputs (by setting the
+ corresponding bit in tempX_fan_map), you can set the temperature channel
+ mode using temp[1-6]_pwm_enable, 2 is Thermal Cruise mode and 3
+ is the SmartFanII mode. Temperature channels will try to speed up or
+ slow down all controlled fans, this means one fan can receive different
+ PWM value requests from different temperature channels, but the chip
+ will always pick the safest (max) PWM value for each fan.
+
+ In Thermal Cruise mode, the chip attempts to keep the temperature at a
+ predefined value, within a tolerance margin. So if tempX_input >
+ thermal_cruiseX + toleranceX, the chip will increase the PWM value,
+ if tempX_input < thermal_cruiseX - toleranceX, the chip will decrease
+ the PWM value. If the temperature is within the tolerance range, the PWM
+ value is left unchanged.
+
+ SmartFanII works differently, you have to define up to 7 PWM, temperature
+ trip points, defining a PWM/temperature curve which the chip will follow.
+ While not fundamentally different from the Thermal Cruise mode, the
+ implementation is quite different, giving you a finer-grained control.
+
+* Chassis
+ If the case open alarm triggers, it will stay in this state unless cleared
+ by any write to the sysfs file "chassis".
+
+* VID and VRM
+ The VRM version is detected automatically, don't modify the it unless you
+ *do* know the cpu VRM version and it's not properly detected.
+
+
+Notes
+-----
+
+ Only Fan1-5 and PWM1-3 are guaranteed to always exist, other fan inputs and
+ PWM outputs may or may not exist depending on the chip pin configuration.
diff --git a/MAINTAINERS b/MAINTAINERS
index 38df725..dea5b2a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -277,7 +277,7 @@ S: Maintained
ALI1563 I2C DRIVER
P: Rudolf Marek
-M: r.marek@sh.cvut.cz
+M: r.marek@assembler.cz
L: i2c@lm-sensors.org
S: Maintained
@@ -296,6 +296,13 @@ L: info-linux@geode.amd.com
W: http://www.amd.com/us-en/ConnectivitySolutions/TechnicalResources/0,,50_2334_2452_11363,00.html
S: Supported
+AMS (Apple Motion Sensor) DRIVER
+P: Stelian Pop
+M: stelian@popies.net
+P: Michael Hanselmann
+M: linux-kernel@hansmi.ch
+S: Supported
+
AMSO1100 RNIC DRIVER
P: Tom Tucker
M: tom@opengridcomputing.com
@@ -3436,6 +3443,12 @@ M: bezaur@gmail.com
L: lm-sensors@lm-sensors.org
S: Maintained
+W83793 HARDWARE MONITORING DRIVER
+P: Rudolf Marek
+M: r.marek@assembler.cz
+L: lm-sensors@lm-sensors.org
+S: Maintained
+
W83L51xD SD/MMC CARD INTERFACE DRIVER
P: Pierre Ossman
M: drzeus-wbsd@drzeus.cx
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index e76d919..891ef6d 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -106,6 +106,31 @@ config SENSORS_K8TEMP
This driver can also be built as a module. If so, the module
will be called k8temp.
+config SENSORS_AMS
+ tristate "Apple Motion Sensor driver"
+ depends on HWMON && PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C) && EXPERIMENTAL
+ help
+ Support for the motion sensor included in PowerBooks. Includes
+ implementations for PMU and I2C.
+
+ This driver can also be built as a module. If so, the module
+ will be called ams.
+
+config SENSORS_AMS_PMU
+ bool "PMU variant"
+ depends on SENSORS_AMS && ADB_PMU
+ default y
+ help
+ PMU variant of motion sensor, found in late 2005 PowerBooks.
+
+config SENSORS_AMS_I2C
+ bool "I2C variant"
+ depends on SENSORS_AMS && I2C
+ default y
+ help
+ I2C variant of motion sensor, found in early 2005 PowerBooks and
+ iBooks.
+
config SENSORS_ASB100
tristate "Asus ASB100 Bach"
depends on HWMON && I2C && EXPERIMENTAL
@@ -142,11 +167,12 @@ config SENSORS_DS1621
will be called ds1621.
config SENSORS_F71805F
- tristate "Fintek F71805F/FG"
+ tristate "Fintek F71805F/FG and F71872F/FG"
depends on HWMON && EXPERIMENTAL
help
If you say yes here you get support for hardware monitoring
- features of the Fintek F71805F/FG chips.
+ features of the Fintek F71805F/FG and F71872F/FG Super-I/O
+ chips.
This driver can also be built as a module. If so, the module
will be called f71805f.
@@ -353,6 +379,19 @@ config SENSORS_PC87360
This driver can also be built as a module. If so, the module
will be called pc87360.
+config SENSORS_PC87427
+ tristate "National Semiconductor PC87427"
+ depends on HWMON && EXPERIMENTAL
+ help
+ If you say yes here you get access to the hardware monitoring
+ functions of the National Semiconductor PC87427 Super-I/O chip.
+ The chip has two distinct logical devices, one for fan speed
+ monitoring and control, and one for voltage and temperature
+ monitoring. Only fan speed monitoring is supported right now.
+
+ This driver can also be built as a module. If so, the module
+ will be called pc87427.
+
config SENSORS_SIS5595
tristate "Silicon Integrated Systems Corp. SiS5595"
depends on HWMON && I2C && PCI && EXPERIMENTAL
@@ -474,6 +513,16 @@ config SENSORS_W83792D
This driver can also be built as a module. If so, the module
will be called w83792d.
+config SENSORS_W83793
+ tristate "Winbond W83793"
+ depends on HWMON && I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for the Winbond W83793
+ hardware monitoring chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called w83793.
+
config SENSORS_W83L785TS
tristate "Winbond W83L785TS-S"
depends on HWMON && I2C && EXPERIMENTAL
@@ -527,6 +576,9 @@ config SENSORS_HDAPS
This driver also provides an absolute input class device, allowing
the laptop to act as a pinball machine-esque joystick.
+ If your ThinkPad is not recognized by the driver, please update to latest
+ BIOS. This is especially the case for some R52 ThinkPads.
+
Say Y here if you have an applicable laptop and want to experience
the awesome power of hdaps.
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index af01cc6..3166112 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_HWMON_VID) += hwmon-vid.o
obj-$(CONFIG_SENSORS_ASB100) += asb100.o
obj-$(CONFIG_SENSORS_W83627HF) += w83627hf.o
obj-$(CONFIG_SENSORS_W83792D) += w83792d.o
+obj-$(CONFIG_SENSORS_W83793) += w83793.o
obj-$(CONFIG_SENSORS_W83781D) += w83781d.o
obj-$(CONFIG_SENSORS_W83791D) += w83791d.o
@@ -18,6 +19,7 @@ obj-$(CONFIG_SENSORS_ADM1025) += adm1025.o
obj-$(CONFIG_SENSORS_ADM1026) += adm1026.o
obj-$(CONFIG_SENSORS_ADM1031) += adm1031.o
obj-$(CONFIG_SENSORS_ADM9240) += adm9240.o
+obj-$(CONFIG_SENSORS_AMS) += ams/
obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o
obj-$(CONFIG_SENSORS_DS1621) += ds1621.o
obj-$(CONFIG_SENSORS_F71805F) += f71805f.o
@@ -41,6 +43,7 @@ obj-$(CONFIG_SENSORS_LM90) += lm90.o
obj-$(CONFIG_SENSORS_LM92) += lm92.o
obj-$(CONFIG_SENSORS_MAX1619) += max1619.o
obj-$(CONFIG_SENSORS_PC87360) += pc87360.o
+obj-$(CONFIG_SENSORS_PC87427) += pc87427.o
obj-$(CONFIG_SENSORS_SIS5595) += sis5595.o
obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o
obj-$(CONFIG_SENSORS_SMSC47M1) += smsc47m1.o
diff --git a/drivers/hwmon/ams/Makefile b/drivers/hwmon/ams/Makefile
new file mode 100644
index 0000000..41c95b2
--- /dev/null
+++ b/drivers/hwmon/ams/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for Apple Motion Sensor driver
+#
+
+ams-y := ams-core.o ams-input.o
+ams-$(CONFIG_SENSORS_AMS_PMU) += ams-pmu.o
+ams-$(CONFIG_SENSORS_AMS_I2C) += ams-i2c.o
+obj-$(CONFIG_SENSORS_AMS) += ams.o
diff --git a/drivers/hwmon/ams/ams-core.c b/drivers/hwmon/ams/ams-core.c
new file mode 100644
index 0000000..f1f0f5d
--- /dev/null
+++ b/drivers/hwmon/ams/ams-core.c
@@ -0,0 +1,265 @@
+/*
+ * Apple Motion Sensor driver
+ *
+ * Copyright (C) 2005 Stelian Pop (stelian@popies.net)
+ * Copyright (C) 2006 Michael Hanselmann (linux-kernel@hansmi.ch)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <asm/pmac_pfunc.h>
+#include <asm/of_platform.h>
+
+#include "ams.h"
+
+/* There is only one motion sensor per machine */
+struct ams ams_info;
+
+static unsigned int verbose;
+module_param(verbose, bool, 0644);
+MODULE_PARM_DESC(verbose, "Show free falls and shocks in kernel output");
+
+/* Call with ams_info.lock held! */
+void ams_sensors(s8 *x, s8 *y, s8 *z)
+{
+ u32 orient = ams_info.vflag? ams_info.orient1 : ams_info.orient2;
+
+ if (orient & 0x80)
+ /* X and Y swapped */
+ ams_info.get_xyz(y, x, z);
+ else
+ ams_info.get_xyz(x, y, z);
+
+ if (orient & 0x04)
+ *z = ~(*z);
+ if (orient & 0x02)
+ *y = ~(*y);
+ if (orient & 0x01)
+ *x = ~(*x);
+}
+
+static ssize_t ams_show_current(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ s8 x, y, z;
+
+ mutex_lock(&ams_info.lock);
+ ams_sensors(&x, &y, &z);
+ mutex_unlock(&ams_info.lock);
+
+ return snprintf(buf, PAGE_SIZE, "%d %d %d\n", x, y, z);
+}
+
+static DEVICE_ATTR(current, S_IRUGO, ams_show_current, NULL);
+
+static void ams_handle_irq(void *data)
+{
+ enum ams_irq irq = *((enum ams_irq *)data);
+
+ spin_lock(&ams_info.irq_lock);
+
+ ams_info.worker_irqs |= irq;
+ schedule_work(&ams_info.worker);
+
+ spin_unlock(&ams_info.irq_lock);
+}
+
+static enum ams_irq ams_freefall_irq_data = AMS_IRQ_FREEFALL;
+static struct pmf_irq_client ams_freefall_client = {
+ .owner = THIS_MODULE,
+ .handler = ams_handle_irq,
+ .data = &ams_freefall_irq_data,
+};
+
+static enum ams_irq ams_shock_irq_data = AMS_IRQ_SHOCK;
+static struct pmf_irq_client ams_shock_client = {
+ .owner = THIS_MODULE,
+ .handler = ams_handle_irq,
+ .data = &ams_shock_irq_data,
+};
+
+/* Once hard disk parking is implemented in the kernel, this function can
+ * trigger it.
+ */
+static void ams_worker(struct work_struct *work)
+{
+ mutex_lock(&ams_info.lock);
+
+ if (ams_info.has_device) {
+ unsigned long flags;
+
+ spin_lock_irqsave(&ams_info.irq_lock, flags);
+
+ if (ams_info.worker_irqs & AMS_IRQ_FREEFALL) {
+ if (verbose)
+ printk(KERN_INFO "ams: freefall detected!\n");
+
+ ams_info.worker_irqs &= ~AMS_IRQ_FREEFALL;
+
+ /* we must call this with interrupts enabled */
+ spin_unlock_irqrestore(&ams_info.irq_lock, flags);
+ ams_info.clear_irq(AMS_IRQ_FREEFALL);
+ spin_lock_irqsave(&ams_info.irq_lock, flags);
+ }
+
+ if (ams_info.worker_irqs & AMS_IRQ_SHOCK) {
+ if (verbose)
+ printk(KERN_INFO "ams: shock detected!\n");
+
+ ams_info.worker_irqs &= ~AMS_IRQ_SHOCK;
+
+ /* we must call this with interrupts enabled */
+ spin_unlock_irqrestore(&ams_info.irq_lock, flags);
+ ams_info.clear_irq(AMS_IRQ_SHOCK);
+ spin_lock_irqsave(&ams_info.irq_lock, flags);
+ }
+
+ spin_unlock_irqrestore(&ams_info.irq_lock, flags);
+ }
+
+ mutex_unlock(&ams_info.lock);
+}
+
+/* Call with ams_info.lock held! */
+int ams_sensor_attach(void)
+{
+ int result;
+ u32 *prop;
+
+ /* Get orientation */
+ prop = (u32*)get_property(ams_info.of_node, "orientation", NULL);
+ if (!prop)
+ return -ENODEV;
+ ams_info.orient1 = *prop;
+ ams_info.orient2 = *(prop + 1);
+
+ /* Register freefall interrupt handler */
+ result = pmf_register_irq_client(ams_info.of_node,
+ "accel-int-1",
+ &ams_freefall_client);
+ if (result < 0)
+ return -ENODEV;
+
+ /* Reset saved irqs */
+ ams_info.worker_irqs = 0;
+
+ /* Register shock interrupt handler */
+ result = pmf_register_irq_client(ams_info.of_node,
+ "accel-int-2",
+ &ams_shock_client);
+ if (result < 0)
+ goto release_freefall;
+
+ /* Create device */
+ ams_info.of_dev = of_platform_device_create(ams_info.of_node, "ams", NULL);
+ if (!ams_info.of_dev) {
+ result = -ENODEV;
+ goto release_shock;
+ }
+
+ /* Create attributes */
+ result = device_create_file(&ams_info.of_dev->dev, &dev_attr_current);
+ if (result)
+ goto release_of;
+
+ ams_info.vflag = !!(ams_info.get_vendor() & 0x10);
+
+ /* Init input device */
+ result = ams_input_init();
+ if (result)
+ goto release_device_file;
+
+ return result;
+release_device_file:
+ device_remove_file(&ams_info.of_dev->dev, &dev_attr_current);
+release_of:
+ of_device_unregister(ams_info.of_dev);
+release_shock:
+ pmf_unregister_irq_client(&ams_shock_client);
+release_freefall:
+ pmf_unregister_irq_client(&ams_freefall_client);
+ return result;
+}
+
+int __init ams_init(void)
+{
+ struct device_node *np;
+
+ spin_lock_init(&ams_info.irq_lock);
+ mutex_init(&ams_info.lock);
+ INIT_WORK(&ams_info.worker, ams_worker);
+
+#ifdef CONFIG_SENSORS_AMS_I2C
+ np = of_find_node_by_name(NULL, "accelerometer");
+ if (np && device_is_compatible(np, "AAPL,accelerometer_1"))
+ /* Found I2C motion sensor */
+ return ams_i2c_init(np);
+#endif
+
+#ifdef CONFIG_SENSORS_AMS_PMU
+ np = of_find_node_by_name(NULL, "sms");
+ if (np && device_is_compatible(np, "sms"))
+ /* Found PMU motion sensor */
+ return ams_pmu_init(np);
+#endif
+
+ printk(KERN_ERR "ams: No motion sensor found.\n");
+
+ return -ENODEV;
+}
+
+void ams_exit(void)
+{
+ mutex_lock(&ams_info.lock);
+
+ if (ams_info.has_device) {
+ /* Remove input device */
+ ams_input_exit();
+
+ /* Shut down implementation */
+ ams_info.exit();
+
+ /* Flush interrupt worker
+ *
+ * We do this after ams_info.exit(), because an interrupt might
+ * have arrived before disabling them.
+ */
+ flush_scheduled_work();
+
+ /* Remove attributes */
+ device_remove_file(&ams_info.of_dev->dev, &dev_attr_current);
+
+ /* Remove device */
+ of_device_unregister(ams_info.of_dev);
+
+ /* Remove handler */
+ pmf_unregister_irq_client(&ams_shock_client);
+ pmf_unregister_irq_client(&ams_freefall_client);
+ }
+
+ mutex_unlock(&ams_info.lock);
+}
+
+MODULE_AUTHOR("Stelian Pop, Michael Hanselmann");
+MODULE_DESCRIPTION("Apple Motion Sensor driver");
+MODULE_LICENSE("GPL");
+
+module_init(ams_init);
+module_exit(ams_exit);
diff --git a/drivers/hwmon/ams/ams-i2c.c b/drivers/hwmon/ams/ams-i2c.c
new file mode 100644
index 0000000..0d24bdf
--- /dev/null
+++ b/drivers/hwmon/ams/ams-i2c.c
@@ -0,0 +1,299 @@
+/*
+ * Apple Motion Sensor driver (I2C variant)
+ *
+ * Copyright (C) 2005 Stelian Pop (stelian@popies.net)
+ * Copyright (C) 2006 Michael Hanselmann (linux-kernel@hansmi.ch)
+ *
+ * Clean room implementation based on the reverse engineered Mac OS X driver by
+ * Johannes Berg <johannes@sipsolutions.net>, documentation available at
+ * http://johannes.sipsolutions.net/PowerBook/Apple_Motion_Sensor_Specification
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+
+#include "ams.h"
+
+/* AMS registers */
+#define AMS_COMMAND 0x00 /* command register */
+#define AMS_STATUS 0x01 /* status register */
+#define AMS_CTRL1 0x02 /* read control 1 (number of values) */
+#define AMS_CTRL2 0x03 /* read control 2 (offset?) */
+#define AMS_CTRL3 0x04 /* read control 3 (size of each value?) */
+#define AMS_DATA1 0x05 /* read data 1 */
+#define AMS_DATA2 0x06 /* read data 2 */
+#define AMS_DATA3 0x07 /* read data 3 */
+#define AMS_DATA4 0x08 /* read data 4 */
+#define AMS_DATAX 0x20 /* data X */
+#define AMS_DATAY 0x21 /* data Y */
+#define AMS_DATAZ 0x22 /* data Z */
+#define AMS_FREEFALL 0x24 /* freefall int control */
+#define AMS_SHOCK 0x25 /* shock int control */
+#define AMS_SENSLOW 0x26 /* sensitivity low limit */
+#define AMS_SENSHIGH 0x27 /* sensitivity high limit */
+#define AMS_CTRLX 0x28 /* control X */
+#define AMS_CTRLY 0x29 /* control Y */
+#define AMS_CTRLZ 0x2A /* control Z */
+#define AMS_UNKNOWN1 0x2B /* unknown 1 */
+#define AMS_UNKNOWN2 0x2C /* unknown 2 */
+#define AMS_UNKNOWN3 0x2D /* unknown 3 */
+#define AMS_VENDOR 0x2E /* vendor */
+
+/* AMS commands - use with the AMS_COMMAND register */
+enum ams_i2c_cmd {
+ AMS_CMD_NOOP = 0,
+ AMS_CMD_VERSION,
+ AMS_CMD_READMEM,
+ AMS_CMD_WRITEMEM,
+ AMS_CMD_ERASEMEM,
+ AMS_CMD_READEE,
+ AMS_CMD_WRITEEE,
+ AMS_CMD_RESET,
+ AMS_CMD_START,
+};
+
+static int ams_i2c_attach(struct i2c_adapter *adapter);
+static int ams_i2c_detach(struct i2c_adapter *adapter);
+
+static struct i2c_driver ams_i2c_driver = {
+ .driver = {
+ .name = "ams",
+ .owner = THIS_MODULE,
+ },
+ .attach_adapter = ams_i2c_attach,
+ .detach_adapter = ams_i2c_detach,
+};
+
+static s32 ams_i2c_read(u8 reg)
+{
+ return i2c_smbus_read_byte_data(&ams_info.i2c_client, reg);
+}
+
+static int ams_i2c_write(u8 reg, u8 value)
+{
+ return i2c_smbus_write_byte_data(&ams_info.i2c_client, reg, value);
+}
+
+static int ams_i2c_cmd(enum ams_i2c_cmd cmd)
+{
+ s32 result;
+ int remaining = HZ / 20;
+
+ ams_i2c_write(AMS_COMMAND, cmd);
+ mdelay(5);
+
+ while (remaining) {
+ result = ams_i2c_read(AMS_COMMAND);
+ if (result == 0 || result & 0x80)
+ return 0;
+
+ remaining = schedule_timeout(remaining);
+ }
+
+ return -1;
+}
+
+static void ams_i2c_set_irq(enum ams_irq reg, char enable)
+{
+ if (reg & AMS_IRQ_FREEFALL) {
+ u8 val = ams_i2c_read(AMS_CTRLX);
+ if (enable)
+ val |= 0x80;
+ else
+ val &= ~0x80;
+ ams_i2c_write(AMS_CTRLX, val);
+ }
+
+ if (reg & AMS_IRQ_SHOCK) {
+ u8 val = ams_i2c_read(AMS_CTRLY);
+ if (enable)
+ val |= 0x80;
+ else
+ val &= ~0x80;
+ ams_i2c_write(AMS_CTRLY, val);
+ }
+
+ if (reg & AMS_IRQ_GLOBAL) {
+ u8 val = ams_i2c_read(AMS_CTRLZ);
+ if (enable)
+ val |= 0x80;
+ else
+ val &= ~0x80;
+ ams_i2c_write(AMS_CTRLZ, val);
+ }
+}
+
+static void ams_i2c_clear_irq(enum ams_irq reg)
+{
+ if (reg & AMS_IRQ_FREEFALL)
+ ams_i2c_write(AMS_FREEFALL, 0);
+
+ if (reg & AMS_IRQ_SHOCK)
+ ams_i2c_write(AMS_SHOCK, 0);
+}
+
+static u8 ams_i2c_get_vendor(void)
+{
+ return ams_i2c_read(AMS_VENDOR);
+}
+
+static void ams_i2c_get_xyz(s8 *x, s8 *y, s8 *z)
+{
+ *x = ams_i2c_read(AMS_DATAX);
+ *y = ams_i2c_read(AMS_DATAY);
+ *z = ams_i2c_read(AMS_DATAZ);
+}
+
+static int ams_i2c_attach(struct i2c_adapter *adapter)
+{
+ unsigned long bus;
+ int vmaj, vmin;
+ int result;
+
+ /* There can be only one */
+ if (unlikely(ams_info.has_device))
+ return -ENODEV;
+
+ if (strncmp(adapter->name, "uni-n", 5))
+ return -ENODEV;
+
+ bus = simple_strtoul(adapter->name + 6, NULL, 10);
+ if (bus != ams_info.i2c_bus)
+ return -ENODEV;
+
+ ams_info.i2c_client.addr = ams_info.i2c_address;
+ ams_info.i2c_client.adapter = adapter;
+ ams_info.i2c_client.driver = &ams_i2c_driver;
+ strcpy(ams_info.i2c_client.name, "Apple Motion Sensor");
+
+ if (ams_i2c_cmd(AMS_CMD_RESET)) {
+ printk(KERN_INFO "ams: Failed to reset the device\n");
+ return -ENODEV;
+ }
+
+ if (ams_i2c_cmd(AMS_CMD_START)) {
+ printk(KERN_INFO "ams: Failed to start the device\n");
+ return -ENODEV;
+ }
+
+ /* get version/vendor information */
+ ams_i2c_write(AMS_CTRL1, 0x02);
+ ams_i2c_write(AMS_CTRL2, 0x85);
+ ams_i2c_write(AMS_CTRL3, 0x01);
+
+ ams_i2c_cmd(AMS_CMD_READMEM);
+
+ vmaj = ams_i2c_read(AMS_DATA1);
+ vmin = ams_i2c_read(AMS_DATA2);
+ if (vmaj != 1 || vmin != 52) {
+ printk(KERN_INFO "ams: Incorrect device version (%d.%d)\n",
+ vmaj, vmin);
+ return -ENODEV;
+ }
+
+ ams_i2c_cmd(AMS_CMD_VERSION);
+
+ vmaj = ams_i2c_read(AMS_DATA1);
+ vmin = ams_i2c_read(AMS_DATA2);
+ if (vmaj != 0 || vmin != 1) {
+ printk(KERN_INFO "ams: Incorrect firmware version (%d.%d)\n",
+ vmaj, vmin);
+ return -ENODEV;
+ }
+
+ /* Disable interrupts */
+ ams_i2c_set_irq(AMS_IRQ_ALL, 0);
+
+ result = ams_sensor_attach();
+ if (result < 0)
+ return result;
+
+ /* Set default values */
+ ams_i2c_write(AMS_SENSLOW, 0x15);
+ ams_i2c_write(AMS_SENSHIGH, 0x60);
+ ams_i2c_write(AMS_CTRLX, 0x08);
+ ams_i2c_write(AMS_CTRLY, 0x0F);
+ ams_i2c_write(AMS_CTRLZ, 0x4F);
+ ams_i2c_write(AMS_UNKNOWN1, 0x14);
+
+ /* Clear interrupts */
+ ams_i2c_clear_irq(AMS_IRQ_ALL);
+
+ ams_info.has_device = 1;
+
+ /* Enable interrupts */
+ ams_i2c_set_irq(AMS_IRQ_ALL, 1);
+
+ printk(KERN_INFO "ams: Found I2C based motion sensor\n");
+
+ return 0;
+}
+
+static int ams_i2c_detach(struct i2c_adapter *adapter)
+{
+ if (ams_info.has_device) {
+ /* Disable interrupts */
+ ams_i2c_set_irq(AMS_IRQ_ALL, 0);
+
+ /* Clear interrupts */
+ ams_i2c_clear_irq(AMS_IRQ_ALL);
+
+ printk(KERN_INFO "ams: Unloading\n");
+
+ ams_info.has_device = 0;
+ }
+
+ return 0;
+}
+
+static void ams_i2c_exit(void)
+{
+ i2c_del_driver(&ams_i2c_driver);
+}
+
+int __init ams_i2c_init(struct device_node *np)
+{
+ char *tmp_bus;
+ int result;
+ u32 *prop;
+
+ mutex_lock(&ams_info.lock);
+
+ /* Set implementation stuff */
+ ams_info.of_node = np;
+ ams_info.exit = ams_i2c_exit;
+ ams_info.get_vendor = ams_i2c_get_vendor;
+ ams_info.get_xyz = ams_i2c_get_xyz;
+ ams_info.clear_irq = ams_i2c_clear_irq;
+ ams_info.bustype = BUS_I2C;
+
+ /* look for bus either using "reg" or by path */
+ prop = (u32*)get_property(ams_info.of_node, "reg", NULL);
+ if (!prop) {
+ result = -ENODEV;
+
+ goto exit;
+ }
+
+ tmp_bus = strstr(ams_info.of_node->full_name, "/i2c-bus@");
+ if (tmp_bus)
+ ams_info.i2c_bus = *(tmp_bus + 9) - '0';
+ else
+ ams_info.i2c_bus = ((*prop) >> 8) & 0x0f;
+ ams_info.i2c_address = ((*prop) & 0xff) >> 1;
+
+ result = i2c_add_driver(&ams_i2c_driver);
+
+exit:
+ mutex_unlock(&ams_info.lock);
+
+ return result;
+}
diff --git a/drivers/hwmon/ams/ams-input.c b/drivers/hwmon/ams/ams-input.c
new file mode 100644
index 0000000..f126aa4
--- /dev/null
+++ b/drivers/hwmon/ams/ams-input.c
@@ -0,0 +1,160 @@
+/*
+ * Apple Motion Sensor driver (joystick emulation)
+ *
+ * Copyright (C) 2005 Stelian Pop (stelian@popies.net)
+ * Copyright (C) 2006 Michael Hanselmann (linux-kernel@hansmi.ch)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+
+#include "ams.h"
+
+static unsigned int joystick;
+module_param(joystick, bool, 0644);
+MODULE_PARM_DESC(joystick, "Enable the input class device on module load");
+
+static unsigned int invert;
+module_param(invert, bool, 0644);
+MODULE_PARM_DESC(invert, "Invert input data on X and Y axis");
+
+static int ams_input_kthread(void *data)
+{
+ s8 x, y, z;
+
+ while (!kthread_should_stop()) {
+ mutex_lock(&ams_info.lock);
+
+ ams_sensors(&x, &y, &z);
+
+ x -= ams_info.xcalib;
+ y -= ams_info.ycalib;
+ z -= ams_info.zcalib;
+
+ input_report_abs(ams_info.idev, ABS_X, invert ? -x : x);
+ input_report_abs(ams_info.idev, ABS_Y, invert ? -y : y);
+ input_report_abs(ams_info.idev, ABS_Z, z);
+
+ input_sync(ams_info.idev);
+
+ mutex_unlock(&ams_info.lock);
+
+ msleep(25);
+ }
+
+ return 0;
+}
+
+static int ams_input_open(struct input_dev *dev)
+{
+ ams_info.kthread = kthread_run(ams_input_kthread, NULL, "kams");
+ return IS_ERR(ams_info.kthread) ? PTR_ERR(ams_info.kthread) : 0;
+}
+
+static void ams_input_close(struct input_dev *dev)
+{
+ kthread_stop(ams_info.kthread);
+}
+
+/* Call with ams_info.lock held! */
+static void ams_input_enable(void)
+{
+ s8 x, y, z;
+
+ if (ams_info.idev)
+ return;
+
+ ams_sensors(&x, &y, &z);
+ ams_info.xcalib = x;
+ ams_info.ycalib = y;
+ ams_info.zcalib = z;
+
+ ams_info.idev = input_allocate_device();
+ if (!ams_info.idev)
+ return;
+
+ ams_info.idev->name = "Apple Motion Sensor";
+ ams_info.idev->id.bustype = ams_info.bustype;
+ ams_info.idev->id.vendor = 0;
+ ams_info.idev->open = ams_input_open;
+ ams_info.idev->close = ams_input_close;
+ ams_info.idev->cdev.dev = &ams_info.of_dev->dev;
+
+ input_set_abs_params(ams_info.idev, ABS_X, -50, 50, 3, 0);
+ input_set_abs_params(ams_info.idev, ABS_Y, -50, 50, 3, 0);
+ input_set_abs_params(ams_info.idev, ABS_Z, -50, 50, 3, 0);
+
+ set_bit(EV_ABS, ams_info.idev->evbit);
+ set_bit(EV_KEY, ams_info.idev->evbit);
+ set_bit(BTN_TOUCH, ams_info.idev->keybit);
+
+ if (input_register_device(ams_info.idev)) {
+ input_free_device(ams_info.idev);
+ ams_info.idev = NULL;
+ return;
+ }
+}
+
+/* Call with ams_info.lock held! */
+static void ams_input_disable(void)
+{
+ if (ams_info.idev) {
+ input_unregister_device(ams_info.idev);
+ ams_info.idev = NULL;
+ }
+}
+
+static ssize_t ams_input_show_joystick(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%d\n", joystick);
+}
+
+static ssize_t ams_input_store_joystick(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ if (sscanf(buf, "%d\n", &joystick) != 1)
+ return -EINVAL;
+
+ mutex_lock(&ams_info.lock);
+
+ if (joystick)
+ ams_input_enable();
+ else
+ ams_input_disable();
+
+ mutex_unlock(&ams_info.lock);
+
+ return count;
+}
+
+static DEVICE_ATTR(joystick, S_IRUGO | S_IWUSR,
+ ams_input_show_joystick, ams_input_store_joystick);
+
+/* Call with ams_info.lock held! */
+int ams_input_init(void)
+{
+ int result;
+
+ result = device_create_file(&ams_info.of_dev->dev, &dev_attr_joystick);
+
+ if (!result && joystick)
+ ams_input_enable();
+ return result;
+}
+
+/* Call with ams_info.lock held! */
+void ams_input_exit()
+{
+ ams_input_disable();
+ device_remove_file(&ams_info.of_dev->dev, &dev_attr_joystick);
+}
diff --git a/drivers/hwmon/ams/ams-pmu.c b/drivers/hwmon/ams/ams-pmu.c
new file mode 100644
index 0000000..4636ae0
--- /dev/null
+++ b/drivers/hwmon/ams/ams-pmu.c
@@ -0,0 +1,207 @@
+/*
+ * Apple Motion Sensor driver (PMU variant)
+ *
+ * Copyright (C) 2006 Michael Hanselmann (linux-kernel@hansmi.ch)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/adb.h>
+#include <linux/pmu.h>
+
+#include "ams.h"
+
+/* Attitude */
+#define AMS_X 0x00
+#define AMS_Y 0x01
+#define AMS_Z 0x02
+
+/* Not exactly known, maybe chip vendor */
+#define AMS_VENDOR 0x03
+
+/* Freefall registers */
+#define AMS_FF_CLEAR 0x04
+#define AMS_FF_ENABLE 0x05
+#define AMS_FF_LOW_LIMIT 0x06
+#define AMS_FF_DEBOUNCE 0x07
+
+/* Shock registers */
+#define AMS_SHOCK_CLEAR 0x08
+#define AMS_SHOCK_ENABLE 0x09
+#define AMS_SHOCK_HIGH_LIMIT 0x0a
+#define AMS_SHOCK_DEBOUNCE 0x0b
+
+/* Global interrupt and power control register */
+#define AMS_CONTROL 0x0c
+
+static u8 ams_pmu_cmd;
+
+static void ams_pmu_req_complete(struct adb_request *req)
+{
+ complete((struct completion *)req->arg);
+}
+
+/* Only call this function from task context */
+static void ams_pmu_set_register(u8 reg, u8 value)
+{
+ static struct adb_request req;
+ DECLARE_COMPLETION(req_complete);
+
+ req.arg = &req_complete;
+ if (pmu_request(&req, ams_pmu_req_complete, 4, ams_pmu_cmd, 0x00, reg, value))
+ return;
+
+ wait_for_completion(&req_complete);
+}
+
+/* Only call this function from task context */
+static u8 ams_pmu_get_register(u8 reg)
+{
+ static struct adb_request req;
+ DECLARE_COMPLETION(req_complete);
+
+ req.arg = &req_complete;
+ if (pmu_request(&req, ams_pmu_req_complete, 3, ams_pmu_cmd, 0x01, reg))
+ return 0;
+
+ wait_for_completion(&req_complete);
+
+ if (req.reply_len > 0)
+ return req.reply[0];
+ else
+ return 0;
+}
+
+/* Enables or disables the specified interrupts */
+static void ams_pmu_set_irq(enum ams_irq reg, char enable)
+{
+ if (reg & AMS_IRQ_FREEFALL) {
+ u8 val = ams_pmu_get_register(AMS_FF_ENABLE);
+ if (enable)
+ val |= 0x80;
+ else
+ val &= ~0x80;
+ ams_pmu_set_register(AMS_FF_ENABLE, val);
+ }
+
+ if (reg & AMS_IRQ_SHOCK) {
+ u8 val = ams_pmu_get_register(AMS_SHOCK_ENABLE);
+ if (enable)
+ val |= 0x80;
+ else
+ val &= ~0x80;
+ ams_pmu_set_register(AMS_SHOCK_ENABLE, val);
+ }
+
+ if (reg & AMS_IRQ_GLOBAL) {
+ u8 val = ams_pmu_get_register(AMS_CONTROL);
+ if (enable)
+ val |= 0x80;
+ else
+ val &= ~0x80;
+ ams_pmu_set_register(AMS_CONTROL, val);
+ }
+}
+
+static void ams_pmu_clear_irq(enum ams_irq reg)
+{
+ if (reg & AMS_IRQ_FREEFALL)
+ ams_pmu_set_register(AMS_FF_CLEAR, 0x00);
+
+ if (reg & AMS_IRQ_SHOCK)
+ ams_pmu_set_register(AMS_SHOCK_CLEAR, 0x00);
+}
+
+static u8 ams_pmu_get_vendor(void)
+{
+ return ams_pmu_get_register(AMS_VENDOR);
+}
+
+static void ams_pmu_get_xyz(s8 *x, s8 *y, s8 *z)
+{
+ *x = ams_pmu_get_register(AMS_X);
+ *y = ams_pmu_get_register(AMS_Y);
+ *z = ams_pmu_get_register(AMS_Z);
+}
+
+static void ams_pmu_exit(void)
+{
+ /* Disable interrupts */
+ ams_pmu_set_irq(AMS_IRQ_ALL, 0);
+
+ /* Clear interrupts */
+ ams_pmu_clear_irq(AMS_IRQ_ALL);
+
+ ams_info.has_device = 0;
+
+ printk(KERN_INFO "ams: Unloading\n");
+}
+
+int __init ams_pmu_init(struct device_node *np)
+{
+ u32 *prop;
+ int result;
+
+ mutex_lock(&ams_info.lock);
+
+ /* Set implementation stuff */
+ ams_info.of_node = np;
+ ams_info.exit = ams_pmu_exit;
+ ams_info.get_vendor = ams_pmu_get_vendor;
+ ams_info.get_xyz = ams_pmu_get_xyz;
+ ams_info.clear_irq = ams_pmu_clear_irq;
+ ams_info.bustype = BUS_HOST;
+
+ /* Get PMU command, should be 0x4e, but we can never know */
+ prop = (u32*)get_property(ams_info.of_node, "reg", NULL);
+ if (!prop) {
+ result = -ENODEV;
+ goto exit;
+ }
+ ams_pmu_cmd = ((*prop) >> 8) & 0xff;
+
+ /* Disable interrupts */
+ ams_pmu_set_irq(AMS_IRQ_ALL, 0);
+
+ /* Clear interrupts */
+ ams_pmu_clear_irq(AMS_IRQ_ALL);
+
+ result = ams_sensor_attach();
+ if (result < 0)
+ goto exit;
+
+ /* Set default values */
+ ams_pmu_set_register(AMS_FF_LOW_LIMIT, 0x15);
+ ams_pmu_set_register(AMS_FF_ENABLE, 0x08);
+ ams_pmu_set_register(AMS_FF_DEBOUNCE, 0x14);
+
+ ams_pmu_set_register(AMS_SHOCK_HIGH_LIMIT, 0x60);
+ ams_pmu_set_register(AMS_SHOCK_ENABLE, 0x0f);
+ ams_pmu_set_register(AMS_SHOCK_DEBOUNCE, 0x14);
+
+ ams_pmu_set_register(AMS_CONTROL, 0x4f);
+
+ /* Clear interrupts */
+ ams_pmu_clear_irq(AMS_IRQ_ALL);
+
+ ams_info.has_device = 1;
+
+ /* Enable interrupts */
+ ams_pmu_set_irq(AMS_IRQ_ALL, 1);
+
+ printk(KERN_INFO "ams: Found PMU based motion sensor\n");
+
+ result = 0;
+
+exit:
+ mutex_unlock(&ams_info.lock);
+
+ return result;
+}
diff --git a/drivers/hwmon/ams/ams.h b/drivers/hwmon/ams/ams.h
new file mode 100644
index 0000000..240730e
--- /dev/null
+++ b/drivers/hwmon/ams/ams.h
@@ -0,0 +1,72 @@
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/kthread.h>
+#include <linux/mutex.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <asm/of_device.h>
+
+enum ams_irq {
+ AMS_IRQ_FREEFALL = 0x01,
+ AMS_IRQ_SHOCK = 0x02,
+ AMS_IRQ_GLOBAL = 0x04,
+ AMS_IRQ_ALL =
+ AMS_IRQ_FREEFALL |
+ AMS_IRQ_SHOCK |
+ AMS_IRQ_GLOBAL,
+};
+
+struct ams {
+ /* Locks */
+ spinlock_t irq_lock;
+ struct mutex lock;
+
+ /* General properties */
+ struct device_node *of_node;
+ struct of_device *of_dev;
+ char has_device;
+ char vflag;
+ u32 orient1;
+ u32 orient2;
+
+ /* Interrupt worker */
+ struct work_struct worker;
+ u8 worker_irqs;
+
+ /* Implementation
+ *
+ * Only call these functions with the main lock held.
+ */
+ void (*exit)(void);
+
+ void (*get_xyz)(s8 *x, s8 *y, s8 *z);
+ u8 (*get_vendor)(void);
+
+ void (*clear_irq)(enum ams_irq reg);
+
+#ifdef CONFIG_SENSORS_AMS_I2C
+ /* I2C properties */
+ int i2c_bus;
+ int i2c_address;
+ struct i2c_client i2c_client;
+#endif
+
+ /* Joystick emulation */
+ struct task_struct *kthread;
+ struct input_dev *idev;
+ __u16 bustype;
+
+ /* calibrated null values */
+ int xcalib, ycalib, zcalib;
+};
+
+extern struct ams ams_info;
+
+extern void ams_sensors(s8 *x, s8 *y, s8 *z);
+extern int ams_sensor_attach(void);
+
+extern int ams_pmu_init(struct device_node *np);
+extern int ams_i2c_init(struct device_node *np);
+
+extern int ams_input_init(void);
+extern void ams_input_exit(void);
diff --git a/drivers/hwmon/f71805f.c b/drivers/hwmon/f71805f.c
index de17a72..a272cae 100644
--- a/drivers/hwmon/f71805f.c
+++ b/drivers/hwmon/f71805f.c
@@ -1,12 +1,15 @@
/*
- * f71805f.c - driver for the Fintek F71805F/FG Super-I/O chip integrated
- * hardware monitoring features
+ * f71805f.c - driver for the Fintek F71805F/FG and F71872F/FG Super-I/O
+ * chips integrated hardware monitoring features
* Copyright (C) 2005-2006 Jean Delvare <khali@linux-fr.org>
*
* The F71805F/FG is a LPC Super-I/O chip made by Fintek. It integrates
* complete hardware monitoring features: voltage, fan and temperature
* sensors, and manual and automatic fan speed control.
*
+ * The F71872F/FG is almost the same, with two more voltages monitored,
+ * and 6 VID inputs.
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
@@ -37,6 +40,7 @@
static struct platform_device *pdev;
#define DRVNAME "f71805f"
+enum kinds { f71805f, f71872f };
/*
* Super-I/O constants and functions
@@ -48,11 +52,13 @@ static struct platform_device *pdev;
#define SIO_REG_DEVID 0x20 /* Device ID (2 bytes) */
#define SIO_REG_DEVREV 0x22 /* Device revision */
#define SIO_REG_MANID 0x23 /* Fintek ID (2 bytes) */
+#define SIO_REG_FNSEL1 0x29 /* Multi Function Select 1 (F71872F) */
#define SIO_REG_ENABLE 0x30 /* Logical device enable */
#define SIO_REG_ADDR 0x60 /* Logical device address (2 bytes) */
#define SIO_FINTEK_ID 0x1934
#define SIO_F71805F_ID 0x0406
+#define SIO_F71872F_ID 0x0341
static inline int
superio_inb(int base, int reg)
@@ -96,22 +102,25 @@ superio_exit(int base)
* ISA constants
*/
-#define REGION_LENGTH 2
-#define ADDR_REG_OFFSET 0
-#define DATA_REG_OFFSET 1
+#define REGION_LENGTH 8
+#define ADDR_REG_OFFSET 5
+#define DATA_REG_OFFSET 6
/*
* Registers
*/
-/* in nr from 0 to 8 (8-bit values) */
+/* in nr from 0 to 10 (8-bit values) */
#define F71805F_REG_IN(nr) (0x10 + (nr))
-#define F71805F_REG_IN_HIGH(nr) (0x40 + 2 * (nr))
-#define F71805F_REG_IN_LOW(nr) (0x41 + 2 * (nr))
+#define F71805F_REG_IN_HIGH(nr) ((nr) < 10 ? 0x40 + 2 * (nr) : 0x2E)
+#define F71805F_REG_IN_LOW(nr) ((nr) < 10 ? 0x41 + 2 * (nr) : 0x2F)
/* fan nr from 0 to 2 (12-bit values, two registers) */
#define F71805F_REG_FAN(nr) (0x20 + 2 * (nr))
#define F71805F_REG_FAN_LOW(nr) (0x28 + 2 * (nr))
+#define F71805F_REG_FAN_TARGET(nr) (0x69 + 16 * (nr))
#define F71805F_REG_FAN_CTRL(nr) (0x60 + 16 * (nr))
+#define F71805F_REG_PWM_FREQ(nr) (0x63 + 16 * (nr))
+#define F71805F_REG_PWM_DUTY(nr) (0x6B + 16 * (nr))
/* temp nr from 0 to 2 (8-bit values) */
#define F71805F_REG_TEMP(nr) (0x1B + (nr))
#define F71805F_REG_TEMP_HIGH(nr) (0x54 + 2 * (nr))
@@ -122,6 +131,14 @@ superio_exit(int base)
/* status nr from 0 to 2 */
#define F71805F_REG_STATUS(nr) (0x36 + (nr))
+/* individual register bits */
+#define FAN_CTRL_DC_MODE 0x10
+#define FAN_CTRL_LATCH_FULL 0x08
+#define FAN_CTRL_MODE_MASK 0x03
+#define FAN_CTRL_MODE_SPEED 0x00
+#define FAN_CTRL_MODE_TEMPERATURE 0x01
+#define FAN_CTRL_MODE_MANUAL 0x02
+
/*
* Data structures and manipulation thereof
*/
@@ -138,12 +155,16 @@ struct f71805f_data {
unsigned long last_limits; /* In jiffies */
/* Register values */
- u8 in[9];
- u8 in_high[9];
- u8 in_low[9];
+ u8 in[11];
+ u8 in_high[11];
+ u8 in_low[11];
+ u16 has_in;
u16 fan[3];
u16 fan_low[3];
- u8 fan_enabled; /* Read once at init time */
+ u16 fan_target[3];
+ u8 fan_ctrl[3];
+ u8 pwm[3];
+ u8 pwm_freq[3];
u8 temp[3];
u8 temp_high[3];
u8 temp_hyst[3];
@@ -151,6 +172,11 @@ struct f71805f_data {
unsigned long alarms;
};
+struct f71805f_sio_data {
+ enum kinds kind;
+ u8 fnsel1;
+};
+
static inline long in_from_reg(u8 reg)
{
return (reg * 8);
@@ -200,6 +226,33 @@ static inline u16 fan_to_reg(long rpm)
return (1500000 / rpm);
}
+static inline unsigned long pwm_freq_from_reg(u8 reg)
+{
+ unsigned long clock = (reg & 0x80) ? 48000000UL : 1000000UL;
+
+ reg &= 0x7f;
+ if (reg == 0)
+ reg++;
+ return clock / (reg << 8);
+}
+
+static inline u8 pwm_freq_to_reg(unsigned long val)
+{
+ if (val >= 187500) /* The highest we can do */
+ return 0x80;
+ if (val >= 1475) /* Use 48 MHz clock */
+ return 0x80 | (48000000UL / (val << 8));
+ if (val < 31) /* The lowest we can do */
+ return 0x7f;
+ else /* Use 1 MHz clock */
+ return 1000000UL / (val << 8);
+}
+
+static inline int pwm_mode_from_reg(u8 reg)
+{
+ return !(reg & FAN_CTRL_DC_MODE);
+}
+
static inline long temp_from_reg(u8 reg)
{
return (reg * 1000);
@@ -274,16 +327,21 @@ static struct f71805f_data *f71805f_update_device(struct device *dev)
/* Limit registers cache is refreshed after 60 seconds */
if (time_after(jiffies, data->last_updated + 60 * HZ)
|| !data->valid) {
- for (nr = 0; nr < 9; nr++) {
+ for (nr = 0; nr < 11; nr++) {
+ if (!(data->has_in & (1 << nr)))
+ continue;
data->in_high[nr] = f71805f_read8(data,
F71805F_REG_IN_HIGH(nr));
data->in_low[nr] = f71805f_read8(data,
F71805F_REG_IN_LOW(nr));
}
for (nr = 0; nr < 3; nr++) {
- if (data->fan_enabled & (1 << nr))
- data->fan_low[nr] = f71805f_read16(data,
- F71805F_REG_FAN_LOW(nr));
+ data->fan_low[nr] = f71805f_read16(data,
+ F71805F_REG_FAN_LOW(nr));
+ data->fan_target[nr] = f71805f_read16(data,
+ F71805F_REG_FAN_TARGET(nr));
+ data->pwm_freq[nr] = f71805f_read8(data,
+ F71805F_REG_PWM_FREQ(nr));
}
for (nr = 0; nr < 3; nr++) {
data->temp_high[nr] = f71805f_read8(data,
@@ -299,14 +357,19 @@ static struct f71805f_data *f71805f_update_device(struct device *dev)
/* Measurement registers cache is refreshed after 1 second */
if (time_after(jiffies, data->last_updated + HZ)
|| !data->valid) {
- for (nr = 0; nr < 9; nr++) {
+ for (nr = 0; nr < 11; nr++) {
+ if (!(data->has_in & (1 << nr)))
+ continue;
data->in[nr] = f71805f_read8(data,
F71805F_REG_IN(nr));
}
for (nr = 0; nr < 3; nr++) {
- if (data->fan_enabled & (1 << nr))
- data->fan[nr] = f71805f_read16(data,
- F71805F_REG_FAN(nr));
+ data->fan[nr] = f71805f_read16(data,
+ F71805F_REG_FAN(nr));
+ data->fan_ctrl[nr] = f71805f_read8(data,
+ F71805F_REG_FAN_CTRL(nr));
+ data->pwm[nr] = f71805f_read8(data,
+ F71805F_REG_PWM_DUTY(nr));
}
for (nr = 0; nr < 3; nr++) {
data->temp[nr] = f71805f_read8(data,
@@ -333,35 +396,43 @@ static ssize_t show_in0(struct device *dev, struct device_attribute *devattr,
char *buf)
{
struct f71805f_data *data = f71805f_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
- return sprintf(buf, "%ld\n", in0_from_reg(data->in[0]));
+ return sprintf(buf, "%ld\n", in0_from_reg(data->in[nr]));
}
static ssize_t show_in0_max(struct device *dev, struct device_attribute
*devattr, char *buf)
{
struct f71805f_data *data = f71805f_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
- return sprintf(buf, "%ld\n", in0_from_reg(data->in_high[0]));
+ return sprintf(buf, "%ld\n", in0_from_reg(data->in_high[nr]));
}
static ssize_t show_in0_min(struct device *dev, struct device_attribute
*devattr, char *buf)
{
struct f71805f_data *data = f71805f_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
- return sprintf(buf, "%ld\n", in0_from_reg(data->in_low[0]));
+ return sprintf(buf, "%ld\n", in0_from_reg(data->in_low[nr]));
}
static ssize_t set_in0_max(struct device *dev, struct device_attribute
*devattr, const char *buf, size_t count)
{
struct f71805f_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
long val = simple_strtol(buf, NULL, 10);
mutex_lock(&data->update_lock);
- data->in_high[0] = in0_to_reg(val);
- f71805f_write8(data, F71805F_REG_IN_HIGH(0), data->in_high[0]);
+ data->in_high[nr] = in0_to_reg(val);
+ f71805f_write8(data, F71805F_REG_IN_HIGH(nr), data->in_high[nr]);
mutex_unlock(&data->update_lock);
return count;
@@ -371,11 +442,13 @@ static ssize_t set_in0_min(struct device *dev, struct device_attribute
*devattr, const char *buf, size_t count)
{
struct f71805f_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
long val = simple_strtol(buf, NULL, 10);
mutex_lock(&data->update_lock);
- data->in_low[0] = in0_to_reg(val);
- f71805f_write8(data, F71805F_REG_IN_LOW(0), data->in_low[0]);
+ data->in_low[nr] = in0_to_reg(val);
+ f71805f_write8(data, F71805F_REG_IN_LOW(nr), data->in_low[nr]);
mutex_unlock(&data->update_lock);
return count;
@@ -463,6 +536,16 @@ static ssize_t show_fan_min(struct device *dev, struct device_attribute
return sprintf(buf, "%ld\n", fan_from_reg(data->fan_low[nr]));
}
+static ssize_t show_fan_target(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct f71805f_data *data = f71805f_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
+
+ return sprintf(buf, "%ld\n", fan_from_reg(data->fan_target[nr]));
+}
+
static ssize_t set_fan_min(struct device *dev, struct device_attribute
*devattr, const char *buf, size_t count)
{
@@ -479,6 +562,157 @@ static ssize_t set_fan_min(struct device *dev, struct device_attribute
return count;
}
+static ssize_t set_fan_target(struct device *dev, struct device_attribute
+ *devattr, const char *buf, size_t count)
+{
+ struct f71805f_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
+ long val = simple_strtol(buf, NULL, 10);
+
+ mutex_lock(&data->update_lock);
+ data->fan_target[nr] = fan_to_reg(val);
+ f71805f_write16(data, F71805F_REG_FAN_TARGET(nr),
+ data->fan_target[nr]);
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+static ssize_t show_pwm(struct device *dev, struct device_attribute *devattr,
+ char *buf)
+{
+ struct f71805f_data *data = f71805f_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
+
+ return sprintf(buf, "%d\n", (int)data->pwm[nr]);
+}
+
+static ssize_t show_pwm_enable(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct f71805f_data *data = f71805f_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
+ int mode;
+
+ switch (data->fan_ctrl[nr] & FAN_CTRL_MODE_MASK) {
+ case FAN_CTRL_MODE_SPEED:
+ mode = 3;
+ break;
+ case FAN_CTRL_MODE_TEMPERATURE:
+ mode = 2;
+ break;
+ default: /* MANUAL */
+ mode = 1;
+ }
+
+ return sprintf(buf, "%d\n", mode);
+}
+
+static ssize_t show_pwm_freq(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct f71805f_data *data = f71805f_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
+
+ return sprintf(buf, "%lu\n", pwm_freq_from_reg(data->pwm_freq[nr]));
+}
+
+static ssize_t show_pwm_mode(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct f71805f_data *data = f71805f_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
+
+ return sprintf(buf, "%d\n", pwm_mode_from_reg(data->fan_ctrl[nr]));
+}
+
+static ssize_t set_pwm(struct device *dev, struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ struct f71805f_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
+ unsigned long val = simple_strtoul(buf, NULL, 10);
+
+ if (val > 255)
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ data->pwm[nr] = val;
+ f71805f_write8(data, F71805F_REG_PWM_DUTY(nr), data->pwm[nr]);
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+static struct attribute *f71805f_attr_pwm[];
+
+static ssize_t set_pwm_enable(struct device *dev, struct device_attribute
+ *devattr, const char *buf, size_t count)
+{
+ struct f71805f_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
+ unsigned long val = simple_strtoul(buf, NULL, 10);
+ u8 reg;
+
+ if (val < 1 || val > 3)
+ return -EINVAL;
+
+ if (val > 1) { /* Automatic mode, user can't set PWM value */
+ if (sysfs_chmod_file(&dev->kobj, f71805f_attr_pwm[nr],
+ S_IRUGO))
+ dev_dbg(dev, "chmod -w pwm%d failed\n", nr + 1);
+ }
+
+ mutex_lock(&data->update_lock);
+ reg = f71805f_read8(data, F71805F_REG_FAN_CTRL(nr))
+ & ~FAN_CTRL_MODE_MASK;
+ switch (val) {
+ case 1:
+ reg |= FAN_CTRL_MODE_MANUAL;
+ break;
+ case 2:
+ reg |= FAN_CTRL_MODE_TEMPERATURE;
+ break;
+ case 3:
+ reg |= FAN_CTRL_MODE_SPEED;
+ break;
+ }
+ data->fan_ctrl[nr] = reg;
+ f71805f_write8(data, F71805F_REG_FAN_CTRL(nr), reg);
+ mutex_unlock(&data->update_lock);
+
+ if (val == 1) { /* Manual mode, user can set PWM value */
+ if (sysfs_chmod_file(&dev->kobj, f71805f_attr_pwm[nr],
+ S_IRUGO | S_IWUSR))
+ dev_dbg(dev, "chmod +w pwm%d failed\n", nr + 1);
+ }
+
+ return count;
+}
+
+static ssize_t set_pwm_freq(struct device *dev, struct device_attribute
+ *devattr, const char *buf, size_t count)
+{
+ struct f71805f_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
+ unsigned long val = simple_strtoul(buf, NULL, 10);
+
+ mutex_lock(&data->update_lock);
+ data->pwm_freq[nr] = pwm_freq_to_reg(val);
+ f71805f_write8(data, F71805F_REG_PWM_FREQ(nr), data->pwm_freq[nr]);
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
static ssize_t show_temp(struct device *dev, struct device_attribute *devattr,
char *buf)
{
@@ -557,7 +791,7 @@ static ssize_t show_alarms_in(struct device *dev, struct device_attribute
{
struct f71805f_data *data = f71805f_update_device(dev);
- return sprintf(buf, "%lu\n", data->alarms & 0x1ff);
+ return sprintf(buf, "%lu\n", data->alarms & 0x7ff);
}
static ssize_t show_alarms_fan(struct device *dev, struct device_attribute
@@ -594,9 +828,11 @@ static ssize_t show_name(struct device *dev, struct device_attribute
return sprintf(buf, "%s\n", data->name);
}
-static DEVICE_ATTR(in0_input, S_IRUGO, show_in0, NULL);
-static DEVICE_ATTR(in0_max, S_IRUGO| S_IWUSR, show_in0_max, set_in0_max);
-static DEVICE_ATTR(in0_min, S_IRUGO| S_IWUSR, show_in0_min, set_in0_min);
+static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, show_in0, NULL, 0);
+static SENSOR_DEVICE_ATTR(in0_max, S_IRUGO| S_IWUSR,
+ show_in0_max, set_in0_max, 0);
+static SENSOR_DEVICE_ATTR(in0_min, S_IRUGO| S_IWUSR,
+ show_in0_min, set_in0_min, 0);
static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_in, NULL, 1);
static SENSOR_DEVICE_ATTR(in1_max, S_IRUGO | S_IWUSR,
show_in_max, set_in_max, 1);
@@ -637,16 +873,32 @@ static SENSOR_DEVICE_ATTR(in8_max, S_IRUGO | S_IWUSR,
show_in_max, set_in_max, 8);
static SENSOR_DEVICE_ATTR(in8_min, S_IRUGO | S_IWUSR,
show_in_min, set_in_min, 8);
+static SENSOR_DEVICE_ATTR(in9_input, S_IRUGO, show_in0, NULL, 9);
+static SENSOR_DEVICE_ATTR(in9_max, S_IRUGO | S_IWUSR,
+ show_in0_max, set_in0_max, 9);
+static SENSOR_DEVICE_ATTR(in9_min, S_IRUGO | S_IWUSR,
+ show_in0_min, set_in0_min, 9);
+static SENSOR_DEVICE_ATTR(in10_input, S_IRUGO, show_in0, NULL, 10);
+static SENSOR_DEVICE_ATTR(in10_max, S_IRUGO | S_IWUSR,
+ show_in0_max, set_in0_max, 10);
+static SENSOR_DEVICE_ATTR(in10_min, S_IRUGO | S_IWUSR,
+ show_in0_min, set_in0_min, 10);
static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0);
static SENSOR_DEVICE_ATTR(fan1_min, S_IRUGO | S_IWUSR,
show_fan_min, set_fan_min, 0);
+static SENSOR_DEVICE_ATTR(fan1_target, S_IRUGO | S_IWUSR,
+ show_fan_target, set_fan_target, 0);
static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1);
static SENSOR_DEVICE_ATTR(fan2_min, S_IRUGO | S_IWUSR,
show_fan_min, set_fan_min, 1);
+static SENSOR_DEVICE_ATTR(fan2_target, S_IRUGO | S_IWUSR,
+ show_fan_target, set_fan_target, 1);
static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2);
static SENSOR_DEVICE_ATTR(fan3_min, S_IRUGO | S_IWUSR,
show_fan_min, set_fan_min, 2);
+static SENSOR_DEVICE_ATTR(fan3_target, S_IRUGO | S_IWUSR,
+ show_fan_target, set_fan_target, 2);
static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO | S_IWUSR,
@@ -667,6 +919,27 @@ static SENSOR_DEVICE_ATTR(temp3_max_hyst, S_IRUGO | S_IWUSR,
show_temp_hyst, set_temp_hyst, 2);
static SENSOR_DEVICE_ATTR(temp3_type, S_IRUGO, show_temp_type, NULL, 2);
+/* pwm (value) files are created read-only, write permission is
+ then added or removed dynamically as needed */
+static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO, show_pwm, set_pwm, 0);
+static SENSOR_DEVICE_ATTR(pwm1_enable, S_IRUGO | S_IWUSR,
+ show_pwm_enable, set_pwm_enable, 0);
+static SENSOR_DEVICE_ATTR(pwm1_freq, S_IRUGO | S_IWUSR,
+ show_pwm_freq, set_pwm_freq, 0);
+static SENSOR_DEVICE_ATTR(pwm1_mode, S_IRUGO, show_pwm_mode, NULL, 0);
+static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO, show_pwm, set_pwm, 1);
+static SENSOR_DEVICE_ATTR(pwm2_enable, S_IRUGO | S_IWUSR,
+ show_pwm_enable, set_pwm_enable, 1);
+static SENSOR_DEVICE_ATTR(pwm2_freq, S_IRUGO | S_IWUSR,
+ show_pwm_freq, set_pwm_freq, 1);
+static SENSOR_DEVICE_ATTR(pwm2_mode, S_IRUGO, show_pwm_mode, NULL, 1);
+static SENSOR_DEVICE_ATTR(pwm3, S_IRUGO, show_pwm, set_pwm, 2);
+static SENSOR_DEVICE_ATTR(pwm3_enable, S_IRUGO | S_IWUSR,
+ show_pwm_enable, set_pwm_enable, 2);
+static SENSOR_DEVICE_ATTR(pwm3_freq, S_IRUGO | S_IWUSR,
+ show_pwm_freq, set_pwm_freq, 2);
+static SENSOR_DEVICE_ATTR(pwm3_mode, S_IRUGO, show_pwm_mode, NULL, 2);
+
static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0);
static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1);
static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2);
@@ -676,6 +949,8 @@ static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 5);
static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 6);
static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, 7);
static SENSOR_DEVICE_ATTR(in8_alarm, S_IRUGO, show_alarm, NULL, 8);
+static SENSOR_DEVICE_ATTR(in9_alarm, S_IRUGO, show_alarm, NULL, 9);
+static SENSOR_DEVICE_ATTR(in10_alarm, S_IRUGO, show_alarm, NULL, 10);
static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 11);
static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 12);
static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 13);
@@ -689,9 +964,9 @@ static DEVICE_ATTR(alarms_temp, S_IRUGO, show_alarms_temp, NULL);
static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
static struct attribute *f71805f_attributes[] = {
- &dev_attr_in0_input.attr,
- &dev_attr_in0_max.attr,
- &dev_attr_in0_min.attr,
+ &sensor_dev_attr_in0_input.dev_attr.attr,
+ &sensor_dev_attr_in0_max.dev_attr.attr,
+ &sensor_dev_attr_in0_min.dev_attr.attr,
&sensor_dev_attr_in1_input.dev_attr.attr,
&sensor_dev_attr_in1_max.dev_attr.attr,
&sensor_dev_attr_in1_min.dev_attr.attr,
@@ -701,9 +976,6 @@ static struct attribute *f71805f_attributes[] = {
&sensor_dev_attr_in3_input.dev_attr.attr,
&sensor_dev_attr_in3_max.dev_attr.attr,
&sensor_dev_attr_in3_min.dev_attr.attr,
- &sensor_dev_attr_in4_input.dev_attr.attr,
- &sensor_dev_attr_in4_max.dev_attr.attr,
- &sensor_dev_attr_in4_min.dev_attr.attr,
&sensor_dev_attr_in5_input.dev_attr.attr,
&sensor_dev_attr_in5_max.dev_attr.attr,
&sensor_dev_attr_in5_min.dev_attr.attr,
@@ -713,9 +985,29 @@ static struct attribute *f71805f_attributes[] = {
&sensor_dev_attr_in7_input.dev_attr.attr,
&sensor_dev_attr_in7_max.dev_attr.attr,
&sensor_dev_attr_in7_min.dev_attr.attr,
- &sensor_dev_attr_in8_input.dev_attr.attr,
- &sensor_dev_attr_in8_max.dev_attr.attr,
- &sensor_dev_attr_in8_min.dev_attr.attr,
+
+ &sensor_dev_attr_fan1_input.dev_attr.attr,
+ &sensor_dev_attr_fan1_min.dev_attr.attr,
+ &sensor_dev_attr_fan1_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan1_target.dev_attr.attr,
+ &sensor_dev_attr_fan2_input.dev_attr.attr,
+ &sensor_dev_attr_fan2_min.dev_attr.attr,
+ &sensor_dev_attr_fan2_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan2_target.dev_attr.attr,
+ &sensor_dev_attr_fan3_input.dev_attr.attr,
+ &sensor_dev_attr_fan3_min.dev_attr.attr,
+ &sensor_dev_attr_fan3_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan3_target.dev_attr.attr,
+
+ &sensor_dev_attr_pwm1.dev_attr.attr,
+ &sensor_dev_attr_pwm1_enable.dev_attr.attr,
+ &sensor_dev_attr_pwm1_mode.dev_attr.attr,
+ &sensor_dev_attr_pwm2.dev_attr.attr,
+ &sensor_dev_attr_pwm2_enable.dev_attr.attr,
+ &sensor_dev_attr_pwm2_mode.dev_attr.attr,
+ &sensor_dev_attr_pwm3.dev_attr.attr,
+ &sensor_dev_attr_pwm3_enable.dev_attr.attr,
+ &sensor_dev_attr_pwm3_mode.dev_attr.attr,
&sensor_dev_attr_temp1_input.dev_attr.attr,
&sensor_dev_attr_temp1_max.dev_attr.attr,
@@ -734,11 +1026,9 @@ static struct attribute *f71805f_attributes[] = {
&sensor_dev_attr_in1_alarm.dev_attr.attr,
&sensor_dev_attr_in2_alarm.dev_attr.attr,
&sensor_dev_attr_in3_alarm.dev_attr.attr,
- &sensor_dev_attr_in4_alarm.dev_attr.attr,
&sensor_dev_attr_in5_alarm.dev_attr.attr,
&sensor_dev_attr_in6_alarm.dev_attr.attr,
&sensor_dev_attr_in7_alarm.dev_attr.attr,
- &sensor_dev_attr_in8_alarm.dev_attr.attr,
&dev_attr_alarms_in.attr,
&sensor_dev_attr_temp1_alarm.dev_attr.attr,
&sensor_dev_attr_temp2_alarm.dev_attr.attr,
@@ -754,29 +1044,59 @@ static const struct attribute_group f71805f_group = {
.attrs = f71805f_attributes,
};
-static struct attribute *f71805f_attributes_fan[3][4] = {
+static struct attribute *f71805f_attributes_optin[4][5] = {
{
- &sensor_dev_attr_fan1_input.dev_attr.attr,
- &sensor_dev_attr_fan1_min.dev_attr.attr,
- &sensor_dev_attr_fan1_alarm.dev_attr.attr,
+ &sensor_dev_attr_in4_input.dev_attr.attr,
+ &sensor_dev_attr_in4_max.dev_attr.attr,
+ &sensor_dev_attr_in4_min.dev_attr.attr,
+ &sensor_dev_attr_in4_alarm.dev_attr.attr,
+ NULL
+ }, {
+ &sensor_dev_attr_in8_input.dev_attr.attr,
+ &sensor_dev_attr_in8_max.dev_attr.attr,
+ &sensor_dev_attr_in8_min.dev_attr.attr,
+ &sensor_dev_attr_in8_alarm.dev_attr.attr,
NULL
}, {
- &sensor_dev_attr_fan2_input.dev_attr.attr,
- &sensor_dev_attr_fan2_min.dev_attr.attr,
- &sensor_dev_attr_fan2_alarm.dev_attr.attr,
+ &sensor_dev_attr_in9_input.dev_attr.attr,
+ &sensor_dev_attr_in9_max.dev_attr.attr,
+ &sensor_dev_attr_in9_min.dev_attr.attr,
+ &sensor_dev_attr_in9_alarm.dev_attr.attr,
NULL
}, {
- &sensor_dev_attr_fan3_input.dev_attr.attr,
- &sensor_dev_attr_fan3_min.dev_attr.attr,
- &sensor_dev_attr_fan3_alarm.dev_attr.attr,
+ &sensor_dev_attr_in10_input.dev_attr.attr,
+ &sensor_dev_attr_in10_max.dev_attr.attr,
+ &sensor_dev_attr_in10_min.dev_attr.attr,
+ &sensor_dev_attr_in10_alarm.dev_attr.attr,
NULL
}
};
-static const struct attribute_group f71805f_group_fan[3] = {
- { .attrs = f71805f_attributes_fan[0] },
- { .attrs = f71805f_attributes_fan[1] },
- { .attrs = f71805f_attributes_fan[2] },
+static const struct attribute_group f71805f_group_optin[4] = {
+ { .attrs = f71805f_attributes_optin[0] },
+ { .attrs = f71805f_attributes_optin[1] },
+ { .attrs = f71805f_attributes_optin[2] },
+ { .attrs = f71805f_attributes_optin[3] },
+};
+
+/* We don't include pwm_freq files in the arrays above, because they must be
+ created conditionally (only if pwm_mode is 1 == PWM) */
+static struct attribute *f71805f_attributes_pwm_freq[] = {
+ &sensor_dev_attr_pwm1_freq.dev_attr.attr,
+ &sensor_dev_attr_pwm2_freq.dev_attr.attr,
+ &sensor_dev_attr_pwm3_freq.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group f71805f_group_pwm_freq = {
+ .attrs = f71805f_attributes_pwm_freq,
+};
+
+/* We also need an indexed access to pwmN files to toggle writability */
+static struct attribute *f71805f_attr_pwm[] = {
+ &sensor_dev_attr_pwm1.dev_attr.attr,
+ &sensor_dev_attr_pwm2.dev_attr.attr,
+ &sensor_dev_attr_pwm3.dev_attr.attr,
};
/*
@@ -798,18 +1118,30 @@ static void __devinit f71805f_init_device(struct f71805f_data *data)
/* Fan monitoring can be disabled. If it is, we won't be polling
the register values, and won't create the related sysfs files. */
for (i = 0; i < 3; i++) {
- reg = f71805f_read8(data, F71805F_REG_FAN_CTRL(i));
- if (!(reg & 0x80))
- data->fan_enabled |= (1 << i);
+ data->fan_ctrl[i] = f71805f_read8(data,
+ F71805F_REG_FAN_CTRL(i));
+ /* Clear latch full bit, else "speed mode" fan speed control
+ doesn't work */
+ if (data->fan_ctrl[i] & FAN_CTRL_LATCH_FULL) {
+ data->fan_ctrl[i] &= ~FAN_CTRL_LATCH_FULL;
+ f71805f_write8(data, F71805F_REG_FAN_CTRL(i),
+ data->fan_ctrl[i]);
+ }
}
}
static int __devinit f71805f_probe(struct platform_device *pdev)
{
+ struct f71805f_sio_data *sio_data = pdev->dev.platform_data;
struct f71805f_data *data;
struct resource *res;
int i, err;
+ static const char *names[] = {
+ "f71805f",
+ "f71872f",
+ };
+
if (!(data = kzalloc(sizeof(struct f71805f_data), GFP_KERNEL))) {
err = -ENOMEM;
printk(KERN_ERR DRVNAME ": Out of memory\n");
@@ -819,24 +1151,69 @@ static int __devinit f71805f_probe(struct platform_device *pdev)
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
data->addr = res->start;
mutex_init(&data->lock);
- data->name = "f71805f";
+ data->name = names[sio_data->kind];
mutex_init(&data->update_lock);
platform_set_drvdata(pdev, data);
+ /* Some voltage inputs depend on chip model and configuration */
+ switch (sio_data->kind) {
+ case f71805f:
+ data->has_in = 0x1ff;
+ break;
+ case f71872f:
+ data->has_in = 0x6ef;
+ if (sio_data->fnsel1 & 0x01)
+ data->has_in |= (1 << 4); /* in4 */
+ if (sio_data->fnsel1 & 0x02)
+ data->has_in |= (1 << 8); /* in8 */
+ break;
+ }
+
/* Initialize the F71805F chip */
f71805f_init_device(data);
/* Register sysfs interface files */
if ((err = sysfs_create_group(&pdev->dev.kobj, &f71805f_group)))
goto exit_free;
- for (i = 0; i < 3; i++) {
- if (!(data->fan_enabled & (1 << i)))
- continue;
+ if (data->has_in & (1 << 4)) { /* in4 */
+ if ((err = sysfs_create_group(&pdev->dev.kobj,
+ &f71805f_group_optin[0])))
+ goto exit_remove_files;
+ }
+ if (data->has_in & (1 << 8)) { /* in8 */
+ if ((err = sysfs_create_group(&pdev->dev.kobj,
+ &f71805f_group_optin[1])))
+ goto exit_remove_files;
+ }
+ if (data->has_in & (1 << 9)) { /* in9 (F71872F/FG only) */
if ((err = sysfs_create_group(&pdev->dev.kobj,
- &f71805f_group_fan[i])))
+ &f71805f_group_optin[2])))
goto exit_remove_files;
}
+ if (data->has_in & (1 << 10)) { /* in9 (F71872F/FG only) */
+ if ((err = sysfs_create_group(&pdev->dev.kobj,
+ &f71805f_group_optin[3])))
+ goto exit_remove_files;
+ }
+ for (i = 0; i < 3; i++) {
+ /* If control mode is PWM, create pwm_freq file */
+ if (!(data->fan_ctrl[i] & FAN_CTRL_DC_MODE)) {
+ if ((err = sysfs_create_file(&pdev->dev.kobj,
+ f71805f_attributes_pwm_freq[i])))
+ goto exit_remove_files;
+ }
+ /* If PWM is in manual mode, add write permission */
+ if (data->fan_ctrl[i] & FAN_CTRL_MODE_MANUAL) {
+ if ((err = sysfs_chmod_file(&pdev->dev.kobj,
+ f71805f_attr_pwm[i],
+ S_IRUGO | S_IWUSR))) {
+ dev_err(&pdev->dev, "chmod +w pwm%d failed\n",
+ i + 1);
+ goto exit_remove_files;
+ }
+ }
+ }
data->class_dev = hwmon_device_register(&pdev->dev);
if (IS_ERR(data->class_dev)) {
@@ -849,8 +1226,9 @@ static int __devinit f71805f_probe(struct platform_device *pdev)
exit_remove_files:
sysfs_remove_group(&pdev->dev.kobj, &f71805f_group);
- for (i = 0; i < 3; i++)
- sysfs_remove_group(&pdev->dev.kobj, &f71805f_group_fan[i]);
+ for (i = 0; i < 4; i++)
+ sysfs_remove_group(&pdev->dev.kobj, &f71805f_group_optin[i]);
+ sysfs_remove_group(&pdev->dev.kobj, &f71805f_group_pwm_freq);
exit_free:
platform_set_drvdata(pdev, NULL);
kfree(data);
@@ -866,8 +1244,9 @@ static int __devexit f71805f_remove(struct platform_device *pdev)
platform_set_drvdata(pdev, NULL);
hwmon_device_unregister(data->class_dev);
sysfs_remove_group(&pdev->dev.kobj, &f71805f_group);
- for (i = 0; i < 3; i++)
- sysfs_remove_group(&pdev->dev.kobj, &f71805f_group_fan[i]);
+ for (i = 0; i < 4; i++)
+ sysfs_remove_group(&pdev->dev.kobj, &f71805f_group_optin[i]);
+ sysfs_remove_group(&pdev->dev.kobj, &f71805f_group_pwm_freq);
kfree(data);
return 0;
@@ -882,7 +1261,8 @@ static struct platform_driver f71805f_driver = {
.remove = __devexit_p(f71805f_remove),
};
-static int __init f71805f_device_add(unsigned short address)
+static int __init f71805f_device_add(unsigned short address,
+ const struct f71805f_sio_data *sio_data)
{
struct resource res = {
.start = address,
@@ -906,26 +1286,45 @@ static int __init f71805f_device_add(unsigned short address)
goto exit_device_put;
}
+ pdev->dev.platform_data = kmalloc(sizeof(struct f71805f_sio_data),
+ GFP_KERNEL);
+ if (!pdev->dev.platform_data) {
+ err = -ENOMEM;
+ printk(KERN_ERR DRVNAME ": Platform data allocation failed\n");
+ goto exit_device_put;
+ }
+ memcpy(pdev->dev.platform_data, sio_data,
+ sizeof(struct f71805f_sio_data));
+
err = platform_device_add(pdev);
if (err) {
printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
err);
- goto exit_device_put;
+ goto exit_kfree_data;
}
return 0;
+exit_kfree_data:
+ kfree(pdev->dev.platform_data);
+ pdev->dev.platform_data = NULL;
exit_device_put:
platform_device_put(pdev);
exit:
return err;
}
-static int __init f71805f_find(int sioaddr, unsigned short *address)
+static int __init f71805f_find(int sioaddr, unsigned short *address,
+ struct f71805f_sio_data *sio_data)
{
int err = -ENODEV;
u16 devid;
+ static const char *names[] = {
+ "F71805F/FG",
+ "F71872F/FG",
+ };
+
superio_enter(sioaddr);
devid = superio_inw(sioaddr, SIO_REG_MANID);
@@ -933,7 +1332,15 @@ static int __init f71805f_find(int sioaddr, unsigned short *address)
goto exit;
devid = superio_inw(sioaddr, SIO_REG_DEVID);
- if (devid != SIO_F71805F_ID) {
+ switch (devid) {
+ case SIO_F71805F_ID:
+ sio_data->kind = f71805f;
+ break;
+ case SIO_F71872F_ID:
+ sio_data->kind = f71872f;
+ sio_data->fnsel1 = superio_inb(sioaddr, SIO_REG_FNSEL1);
+ break;
+ default:
printk(KERN_INFO DRVNAME ": Unsupported Fintek device, "
"skipping\n");
goto exit;
@@ -952,10 +1359,12 @@ static int __init f71805f_find(int sioaddr, unsigned short *address)
"skipping\n");
goto exit;
}
+ *address &= ~(REGION_LENGTH - 1); /* Ignore 3 LSB */
err = 0;
- printk(KERN_INFO DRVNAME ": Found F71805F chip at %#x, revision %u\n",
- *address, superio_inb(sioaddr, SIO_REG_DEVREV));
+ printk(KERN_INFO DRVNAME ": Found %s chip at %#x, revision %u\n",
+ names[sio_data->kind], *address,
+ superio_inb(sioaddr, SIO_REG_DEVREV));
exit:
superio_exit(sioaddr);
@@ -966,9 +1375,10 @@ static int __init f71805f_init(void)
{
int err;
unsigned short address;
+ struct f71805f_sio_data sio_data;
- if (f71805f_find(0x2e, &address)
- && f71805f_find(0x4e, &address))
+ if (f71805f_find(0x2e, &address, &sio_data)
+ && f71805f_find(0x4e, &address, &sio_data))
return -ENODEV;
err = platform_driver_register(&f71805f_driver);
@@ -976,7 +1386,7 @@ static int __init f71805f_init(void)
goto exit;
/* Sets global pdev as a side effect */
- err = f71805f_device_add(address);
+ err = f71805f_device_add(address, &sio_data);
if (err)
goto exit_driver;
@@ -990,13 +1400,16 @@ exit:
static void __exit f71805f_exit(void)
{
+ kfree(pdev->dev.platform_data);
+ pdev->dev.platform_data = NULL;
platform_device_unregister(pdev);
+
platform_driver_unregister(&f71805f_driver);
}
MODULE_AUTHOR("Jean Delvare <khali@linux-fr>");
MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("F71805F hardware monitoring driver");
+MODULE_DESCRIPTION("F71805F/F71872F hardware monitoring driver");
module_init(f71805f_init);
module_exit(f71805f_exit);
diff --git a/drivers/hwmon/hdaps.c b/drivers/hwmon/hdaps.c
index e8ef62b..bf759ea 100644
--- a/drivers/hwmon/hdaps.c
+++ b/drivers/hwmon/hdaps.c
@@ -478,74 +478,64 @@ static struct attribute_group hdaps_attribute_group = {
/* Module stuff */
/* hdaps_dmi_match - found a match. return one, short-circuiting the hunt. */
-static int hdaps_dmi_match(struct dmi_system_id *id)
+static int __init hdaps_dmi_match(struct dmi_system_id *id)
{
printk(KERN_INFO "hdaps: %s detected.\n", id->ident);
return 1;
}
/* hdaps_dmi_match_invert - found an inverted match. */
-static int hdaps_dmi_match_invert(struct dmi_system_id *id)
+static int __init hdaps_dmi_match_invert(struct dmi_system_id *id)
{
hdaps_invert = 1;
printk(KERN_INFO "hdaps: inverting axis readings.\n");
return hdaps_dmi_match(id);
}
-#define HDAPS_DMI_MATCH_NORMAL(model) { \
- .ident = "IBM " model, \
+#define HDAPS_DMI_MATCH_NORMAL(vendor, model) { \
+ .ident = vendor " " model, \
.callback = hdaps_dmi_match, \
.matches = { \
- DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), \
+ DMI_MATCH(DMI_BOARD_VENDOR, vendor), \
DMI_MATCH(DMI_PRODUCT_VERSION, model) \
} \
}
-#define HDAPS_DMI_MATCH_INVERT(model) { \
- .ident = "IBM " model, \
+#define HDAPS_DMI_MATCH_INVERT(vendor, model) { \
+ .ident = vendor " " model, \
.callback = hdaps_dmi_match_invert, \
.matches = { \
- DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), \
+ DMI_MATCH(DMI_BOARD_VENDOR, vendor), \
DMI_MATCH(DMI_PRODUCT_VERSION, model) \
} \
}
-#define HDAPS_DMI_MATCH_LENOVO(model) { \
- .ident = "Lenovo " model, \
- .callback = hdaps_dmi_match_invert, \
- .matches = { \
- DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"), \
- DMI_MATCH(DMI_PRODUCT_VERSION, model) \
- } \
-}
+/* Note that HDAPS_DMI_MATCH_NORMAL("ThinkPad T42") would match
+ "ThinkPad T42p", so the order of the entries matters.
+ If your ThinkPad is not recognized, please update to latest
+ BIOS. This is especially the case for some R52 ThinkPads. */
+static struct dmi_system_id __initdata hdaps_whitelist[] = {
+ HDAPS_DMI_MATCH_INVERT("IBM", "ThinkPad R50p"),
+ HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad R50"),
+ HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad R51"),
+ HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad R52"),
+ HDAPS_DMI_MATCH_INVERT("IBM", "ThinkPad T41p"),
+ HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad T41"),
+ HDAPS_DMI_MATCH_INVERT("IBM", "ThinkPad T42p"),
+ HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad T42"),
+ HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad T43"),
+ HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad T60"),
+ HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad X40"),
+ HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad X41"),
+ HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad X60"),
+ HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad Z60m"),
+ { .ident = NULL }
+};
static int __init hdaps_init(void)
{
int ret;
- /* Note that HDAPS_DMI_MATCH_NORMAL("ThinkPad T42") would match
- "ThinkPad T42p", so the order of the entries matters */
- struct dmi_system_id hdaps_whitelist[] = {
- HDAPS_DMI_MATCH_NORMAL("ThinkPad H"),
- HDAPS_DMI_MATCH_INVERT("ThinkPad R50p"),
- HDAPS_DMI_MATCH_NORMAL("ThinkPad R50"),
- HDAPS_DMI_MATCH_NORMAL("ThinkPad R51"),
- HDAPS_DMI_MATCH_NORMAL("ThinkPad R52"),
- HDAPS_DMI_MATCH_NORMAL("ThinkPad H"), /* R52 (1846AQG) */
- HDAPS_DMI_MATCH_INVERT("ThinkPad T41p"),
- HDAPS_DMI_MATCH_NORMAL("ThinkPad T41"),
- HDAPS_DMI_MATCH_INVERT("ThinkPad T42p"),
- HDAPS_DMI_MATCH_NORMAL("ThinkPad T42"),
- HDAPS_DMI_MATCH_NORMAL("ThinkPad T43"),
- HDAPS_DMI_MATCH_LENOVO("ThinkPad T60p"),
- HDAPS_DMI_MATCH_LENOVO("ThinkPad T60"),
- HDAPS_DMI_MATCH_NORMAL("ThinkPad X40"),
- HDAPS_DMI_MATCH_NORMAL("ThinkPad X41"),
- HDAPS_DMI_MATCH_LENOVO("ThinkPad X60"),
- HDAPS_DMI_MATCH_NORMAL("ThinkPad Z60m"),
- { .ident = NULL }
- };
-
if (!dmi_check_system(hdaps_whitelist)) {
printk(KERN_WARNING "hdaps: supported laptop not found!\n");
ret = -ENODEV;
diff --git a/drivers/hwmon/hwmon-vid.c b/drivers/hwmon/hwmon-vid.c
index 9d67320..31c4200 100644
--- a/drivers/hwmon/hwmon-vid.c
+++ b/drivers/hwmon/hwmon-vid.c
@@ -1,7 +1,7 @@
/*
hwmon-vid.c - VID/VRM/VRD voltage conversions
- Copyright (c) 2004 Rudolf Marek <r.marek@sh.cvut.cz>
+ Copyright (c) 2004 Rudolf Marek <r.marek@assembler.cz>
Partly imported from i2c-vid.h of the lm_sensors project
Copyright (c) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com>
@@ -232,7 +232,7 @@ u8 vid_which_vrm(void)
EXPORT_SYMBOL(vid_from_reg);
EXPORT_SYMBOL(vid_which_vrm);
-MODULE_AUTHOR("Rudolf Marek <r.marek@sh.cvut.cz>");
+MODULE_AUTHOR("Rudolf Marek <r.marek@assembler.cz>");
MODULE_DESCRIPTION("hwmon-vid driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index 323ef06..1ed8b7e 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -3,7 +3,7 @@
monitoring.
Supports: IT8705F Super I/O chip w/LPC interface
- IT8712F Super I/O chip w/LPC interface & SMBus
+ IT8712F Super I/O chip w/LPC interface
IT8716F Super I/O chip w/LPC interface
IT8718F Super I/O chip w/LPC interface
Sis950 A clone of the IT8705F
@@ -41,12 +41,8 @@
#include <asm/io.h>
-/* Addresses to scan */
-static unsigned short normal_i2c[] = { 0x2d, I2C_CLIENT_END };
static unsigned short isa_address;
-
-/* Insmod parameters */
-I2C_CLIENT_INSMOD_4(it87, it8712, it8716, it8718);
+enum chips { it87, it8712, it8716, it8718 };
#define REG 0x2e /* The register to read/write */
#define DEV 0x07 /* Register: Logical device select */
@@ -162,8 +158,6 @@ static u8 vid_value;
#define IT87_REG_TEMP_HIGH(nr) (0x40 + (nr) * 2)
#define IT87_REG_TEMP_LOW(nr) (0x41 + (nr) * 2)
-#define IT87_REG_I2C_ADDR 0x48
-
#define IT87_REG_VIN_ENABLE 0x50
#define IT87_REG_TEMP_ENABLE 0x51
@@ -242,33 +236,22 @@ struct it87_data {
};
-static int it87_attach_adapter(struct i2c_adapter *adapter);
-static int it87_isa_attach_adapter(struct i2c_adapter *adapter);
-static int it87_detect(struct i2c_adapter *adapter, int address, int kind);
+static int it87_detect(struct i2c_adapter *adapter);
static int it87_detach_client(struct i2c_client *client);
static int it87_read_value(struct i2c_client *client, u8 reg);
-static int it87_write_value(struct i2c_client *client, u8 reg, u8 value);
+static void it87_write_value(struct i2c_client *client, u8 reg, u8 value);
static struct it87_data *it87_update_device(struct device *dev);
static int it87_check_pwm(struct i2c_client *client);
static void it87_init_client(struct i2c_client *client, struct it87_data *data);
-static struct i2c_driver it87_driver = {
- .driver = {
- .name = "it87",
- },
- .id = I2C_DRIVERID_IT87,
- .attach_adapter = it87_attach_adapter,
- .detach_client = it87_detach_client,
-};
-
static struct i2c_driver it87_isa_driver = {
.driver = {
.owner = THIS_MODULE,
.name = "it87-isa",
},
- .attach_adapter = it87_isa_attach_adapter,
+ .attach_adapter = it87_detect,
.detach_client = it87_detach_client,
};
@@ -850,22 +833,6 @@ static const struct attribute_group it87_group_opt = {
.attrs = it87_attributes_opt,
};
-/* This function is called when:
- * it87_driver is inserted (when this module is loaded), for each
- available adapter
- * when a new adapter is inserted (and it87_driver is still present) */
-static int it87_attach_adapter(struct i2c_adapter *adapter)
-{
- if (!(adapter->class & I2C_CLASS_HWMON))
- return 0;
- return i2c_probe(adapter, &addr_data, it87_detect);
-}
-
-static int it87_isa_attach_adapter(struct i2c_adapter *adapter)
-{
- return it87_detect(adapter, isa_address, -1);
-}
-
/* SuperIO detection - will change isa_address if a chip is found */
static int __init it87_find(unsigned short *address)
{
@@ -916,29 +883,20 @@ exit:
}
/* This function is called by i2c_probe */
-static int it87_detect(struct i2c_adapter *adapter, int address, int kind)
+static int it87_detect(struct i2c_adapter *adapter)
{
- int i;
struct i2c_client *new_client;
struct it87_data *data;
int err = 0;
- const char *name = "";
- int is_isa = i2c_is_isa_adapter(adapter);
+ const char *name;
int enable_pwm_interface;
- if (!is_isa &&
- !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- goto ERROR0;
-
/* Reserve the ISA region */
- if (is_isa)
- if (!request_region(address, IT87_EXTENT,
- it87_isa_driver.driver.name))
- goto ERROR0;
-
- /* For now, we presume we have a valid client. We create the
- client structure, even though we cannot fill it completely yet.
- But it allows us to access it87_{read,write}_value. */
+ if (!request_region(isa_address, IT87_EXTENT,
+ it87_isa_driver.driver.name)){
+ err = -EBUSY;
+ goto ERROR0;
+ }
if (!(data = kzalloc(sizeof(struct it87_data), GFP_KERNEL))) {
err = -ENOMEM;
@@ -946,80 +904,46 @@ static int it87_detect(struct i2c_adapter *adapter, int address, int kind)
}
new_client = &data->client;
- if (is_isa)
- mutex_init(&data->lock);
+ mutex_init(&data->lock);
i2c_set_clientdata(new_client, data);
- new_client->addr = address;
+ new_client->addr = isa_address;
new_client->adapter = adapter;
- new_client->driver = is_isa ? &it87_isa_driver : &it87_driver;
- new_client->flags = 0;
+ new_client->driver = &it87_isa_driver;
/* Now, we do the remaining detection. */
-
- if (kind < 0) {
- if ((it87_read_value(new_client, IT87_REG_CONFIG) & 0x80)
- || (!is_isa
- && it87_read_value(new_client, IT87_REG_I2C_ADDR) != address)) {
- err = -ENODEV;
- goto ERROR2;
- }
+ if ((it87_read_value(new_client, IT87_REG_CONFIG) & 0x80)
+ || it87_read_value(new_client, IT87_REG_CHIPID) != 0x90) {
+ err = -ENODEV;
+ goto ERROR2;
}
/* Determine the chip type. */
- if (kind <= 0) {
- i = it87_read_value(new_client, IT87_REG_CHIPID);
- if (i == 0x90) {
- kind = it87;
- if (is_isa) {
- switch (chip_type) {
- case IT8712F_DEVID:
- kind = it8712;
- break;
- case IT8716F_DEVID:
- kind = it8716;
- break;
- case IT8718F_DEVID:
- kind = it8718;
- break;
- }
- }
- }
- else {
- if (kind == 0)
- dev_info(&adapter->dev,
- "Ignoring 'force' parameter for unknown chip at "
- "adapter %d, address 0x%02x\n",
- i2c_adapter_id(adapter), address);
- err = -ENODEV;
- goto ERROR2;
- }
- }
-
- if (kind == it87) {
- name = "it87";
- } else if (kind == it8712) {
+ switch (chip_type) {
+ case IT8712F_DEVID:
+ data->type = it8712;
name = "it8712";
- } else if (kind == it8716) {
+ break;
+ case IT8716F_DEVID:
+ data->type = it8716;
name = "it8716";
- } else if (kind == it8718) {
+ break;
+ case IT8718F_DEVID:
+ data->type = it8718;
name = "it8718";
+ break;
+ default:
+ data->type = it87;
+ name = "it87";
}
/* Fill in the remaining client fields and put it into the global list */
strlcpy(new_client->name, name, I2C_NAME_SIZE);
- data->type = kind;
- data->valid = 0;
mutex_init(&data->update_lock);
/* Tell the I2C layer a new client has arrived */
if ((err = i2c_attach_client(new_client)))
goto ERROR2;
- if (!is_isa)
- dev_info(&new_client->dev, "The I2C interface to IT87xxF "
- "hardware monitoring chips is deprecated. Please "
- "report if you still rely on it.\n");
-
/* Check PWM configuration */
enable_pwm_interface = it87_check_pwm(new_client);
@@ -1129,8 +1053,7 @@ ERROR3:
ERROR2:
kfree(data);
ERROR1:
- if (is_isa)
- release_region(address, IT87_EXTENT);
+ release_region(isa_address, IT87_EXTENT);
ERROR0:
return err;
}
@@ -1147,50 +1070,39 @@ static int it87_detach_client(struct i2c_client *client)
if ((err = i2c_detach_client(client)))
return err;
- if(i2c_is_isa_client(client))
- release_region(client->addr, IT87_EXTENT);
+ release_region(client->addr, IT87_EXTENT);
kfree(data);
return 0;
}
-/* The SMBus locks itself, but ISA access must be locked explicitly!
- We don't want to lock the whole ISA bus, so we lock each client
- separately.
+/* ISA access must be locked explicitly!
We ignore the IT87 BUSY flag at this moment - it could lead to deadlocks,
would slow down the IT87 access and should not be necessary. */
static int it87_read_value(struct i2c_client *client, u8 reg)
{
struct it87_data *data = i2c_get_clientdata(client);
-
int res;
- if (i2c_is_isa_client(client)) {
- mutex_lock(&data->lock);
- outb_p(reg, client->addr + IT87_ADDR_REG_OFFSET);
- res = inb_p(client->addr + IT87_DATA_REG_OFFSET);
- mutex_unlock(&data->lock);
- return res;
- } else
- return i2c_smbus_read_byte_data(client, reg);
+
+ mutex_lock(&data->lock);
+ outb_p(reg, client->addr + IT87_ADDR_REG_OFFSET);
+ res = inb_p(client->addr + IT87_DATA_REG_OFFSET);
+ mutex_unlock(&data->lock);
+
+ return res;
}
-/* The SMBus locks itself, but ISA access muse be locked explicitly!
- We don't want to lock the whole ISA bus, so we lock each client
- separately.
+/* ISA access must be locked explicitly!
We ignore the IT87 BUSY flag at this moment - it could lead to deadlocks,
would slow down the IT87 access and should not be necessary. */
-static int it87_write_value(struct i2c_client *client, u8 reg, u8 value)
+static void it87_write_value(struct i2c_client *client, u8 reg, u8 value)
{
struct it87_data *data = i2c_get_clientdata(client);
- if (i2c_is_isa_client(client)) {
- mutex_lock(&data->lock);
- outb_p(reg, client->addr + IT87_ADDR_REG_OFFSET);
- outb_p(value, client->addr + IT87_DATA_REG_OFFSET);
- mutex_unlock(&data->lock);
- return 0;
- } else
- return i2c_smbus_write_byte_data(client, reg, value);
+ mutex_lock(&data->lock);
+ outb_p(reg, client->addr + IT87_ADDR_REG_OFFSET);
+ outb_p(value, client->addr + IT87_DATA_REG_OFFSET);
+ mutex_unlock(&data->lock);
}
/* Return 1 if and only if the PWM interface is safe to use */
@@ -1426,26 +1338,14 @@ static int __init sm_it87_init(void)
{
int res;
- res = i2c_add_driver(&it87_driver);
- if (res)
+ if ((res = it87_find(&isa_address)))
return res;
-
- if (!it87_find(&isa_address)) {
- res = i2c_isa_add_driver(&it87_isa_driver);
- if (res) {
- i2c_del_driver(&it87_driver);
- return res;
- }
- }
-
- return 0;
+ return i2c_isa_add_driver(&it87_isa_driver);
}
static void __exit sm_it87_exit(void)
{
- if (isa_address)
- i2c_isa_del_driver(&it87_isa_driver);
- i2c_del_driver(&it87_driver);
+ i2c_isa_del_driver(&it87_isa_driver);
}
diff --git a/drivers/hwmon/k8temp.c b/drivers/hwmon/k8temp.c
index f58b64e..5d8d0ca 100644
--- a/drivers/hwmon/k8temp.c
+++ b/drivers/hwmon/k8temp.c
@@ -1,7 +1,7 @@
/*
* k8temp.c - Linux kernel module for hardware monitoring
*
- * Copyright (C) 2006 Rudolf Marek <r.marek@sh.cvut.cz>
+ * Copyright (C) 2006 Rudolf Marek <r.marek@assembler.cz>
*
* Inspired from the w83785 and amd756 drivers.
*
@@ -286,7 +286,7 @@ static void __exit k8temp_exit(void)
pci_unregister_driver(&k8temp_driver);
}
-MODULE_AUTHOR("Rudolf Marek <r.marek@sh.cvut.cz>");
+MODULE_AUTHOR("Rudolf Marek <r.marek@assembler.cz>");
MODULE_DESCRIPTION("AMD K8 core temperature monitor");
MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/pc87360.c b/drivers/hwmon/pc87360.c
index 3b8b819..c8a21be 100644
--- a/drivers/hwmon/pc87360.c
+++ b/drivers/hwmon/pc87360.c
@@ -1000,7 +1000,7 @@ static int pc87360_detect(struct i2c_adapter *adapter)
(i&0x02) ? "external" : "internal");
data->vid_conf = confreg[3];
- data->vrm = 90;
+ data->vrm = vid_which_vrm();
}
/* Fan clock dividers may be needed before any data is read */
diff --git a/drivers/hwmon/pc87427.c b/drivers/hwmon/pc87427.c
new file mode 100644
index 0000000..affa21a
--- /dev/null
+++ b/drivers/hwmon/pc87427.c
@@ -0,0 +1,627 @@
+/*
+ * pc87427.c - hardware monitoring driver for the
+ * National Semiconductor PC87427 Super-I/O chip
+ * Copyright (C) 2006 Jean Delvare <khali@linux-fr.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Supports the following chips:
+ *
+ * Chip #vin #fan #pwm #temp devid
+ * PC87427 - 8 - - 0xF2
+ *
+ * This driver assumes that no more than one chip is present.
+ * Only fan inputs are supported so far, although the chip can do much more.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/platform_device.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/sysfs.h>
+#include <asm/io.h>
+
+static struct platform_device *pdev;
+
+#define DRVNAME "pc87427"
+
+/* The lock mutex protects both the I/O accesses (needed because the
+ device is using banked registers) and the register cache (needed to keep
+ the data in the registers and the cache in sync at any time). */
+struct pc87427_data {
+ struct class_device *class_dev;
+ struct mutex lock;
+ int address[2];
+ const char *name;
+
+ unsigned long last_updated; /* in jiffies */
+ u8 fan_enabled; /* bit vector */
+ u16 fan[8]; /* register values */
+ u16 fan_min[8]; /* register values */
+ u8 fan_status[8]; /* register values */
+};
+
+/*
+ * Super-I/O registers and operations
+ */
+
+#define SIOREG_LDSEL 0x07 /* Logical device select */
+#define SIOREG_DEVID 0x20 /* Device ID */
+#define SIOREG_ACT 0x30 /* Device activation */
+#define SIOREG_MAP 0x50 /* I/O or memory mapping */
+#define SIOREG_IOBASE 0x60 /* I/O base address */
+
+static const u8 logdev[2] = { 0x09, 0x14 };
+static const char *logdev_str[2] = { DRVNAME " FMC", DRVNAME " HMC" };
+#define LD_FAN 0
+#define LD_IN 1
+#define LD_TEMP 1
+
+static inline void superio_outb(int sioaddr, int reg, int val)
+{
+ outb(reg, sioaddr);
+ outb(val, sioaddr + 1);
+}
+
+static inline int superio_inb(int sioaddr, int reg)
+{
+ outb(reg, sioaddr);
+ return inb(sioaddr + 1);
+}
+
+static inline void superio_exit(int sioaddr)
+{
+ outb(0x02, sioaddr);
+ outb(0x02, sioaddr + 1);
+}
+
+/*
+ * Logical devices
+ */
+
+#define REGION_LENGTH 32
+#define PC87427_REG_BANK 0x0f
+#define BANK_FM(nr) (nr)
+#define BANK_FT(nr) (0x08 + (nr))
+#define BANK_FC(nr) (0x10 + (nr) * 2)
+
+/*
+ * I/O access functions
+ */
+
+/* ldi is the logical device index */
+static inline int pc87427_read8(struct pc87427_data *data, u8 ldi, u8 reg)
+{
+ return inb(data->address[ldi] + reg);
+}
+
+/* Must be called with data->lock held, except during init */
+static inline int pc87427_read8_bank(struct pc87427_data *data, u8 ldi,
+ u8 bank, u8 reg)
+{
+ outb(bank, data->address[ldi] + PC87427_REG_BANK);
+ return inb(data->address[ldi] + reg);
+}
+
+/* Must be called with data->lock held, except during init */
+static inline void pc87427_write8_bank(struct pc87427_data *data, u8 ldi,
+ u8 bank, u8 reg, u8 value)
+{
+ outb(bank, data->address[ldi] + PC87427_REG_BANK);
+ outb(value, data->address[ldi] + reg);
+}
+
+/*
+ * Fan registers and conversions
+ */
+
+/* fan data registers are 16-bit wide */
+#define PC87427_REG_FAN 0x12
+#define PC87427_REG_FAN_MIN 0x14
+#define PC87427_REG_FAN_STATUS 0x10
+
+#define FAN_STATUS_STALL (1 << 3)
+#define FAN_STATUS_LOSPD (1 << 1)
+#define FAN_STATUS_MONEN (1 << 0)
+
+/* Dedicated function to read all registers related to a given fan input.
+ This saves us quite a few locks and bank selections.
+ Must be called with data->lock held.
+ nr is from 0 to 7 */
+static void pc87427_readall_fan(struct pc87427_data *data, u8 nr)
+{
+ int iobase = data->address[LD_FAN];
+
+ outb(BANK_FM(nr), iobase + PC87427_REG_BANK);
+ data->fan[nr] = inw(iobase + PC87427_REG_FAN);
+ data->fan_min[nr] = inw(iobase + PC87427_REG_FAN_MIN);
+ data->fan_status[nr] = inb(iobase + PC87427_REG_FAN_STATUS);
+ /* Clear fan alarm bits */
+ outb(data->fan_status[nr], iobase + PC87427_REG_FAN_STATUS);
+}
+
+/* The 2 LSB of fan speed registers are used for something different.
+ The actual 2 LSB of the measurements are not available. */
+static inline unsigned long fan_from_reg(u16 reg)
+{
+ reg &= 0xfffc;
+ if (reg == 0x0000 || reg == 0xfffc)
+ return 0;
+ return 5400000UL / reg;
+}
+
+/* The 2 LSB of the fan speed limit registers are not significant. */
+static inline u16 fan_to_reg(unsigned long val)
+{
+ if (val < 83UL)
+ return 0xffff;
+ if (val >= 1350000UL)
+ return 0x0004;
+ return ((1350000UL + val / 2) / val) << 2;
+}
+
+/*
+ * Data interface
+ */
+
+static struct pc87427_data *pc87427_update_device(struct device *dev)
+{
+ struct pc87427_data *data = dev_get_drvdata(dev);
+ int i;
+
+ mutex_lock(&data->lock);
+ if (!time_after(jiffies, data->last_updated + HZ)
+ && data->last_updated)
+ goto done;
+
+ /* Fans */
+ for (i = 0; i < 8; i++) {
+ if (!(data->fan_enabled & (1 << i)))
+ continue;
+ pc87427_readall_fan(data, i);
+ }
+ data->last_updated = jiffies;
+
+done:
+ mutex_unlock(&data->lock);
+ return data;
+}
+
+static ssize_t show_fan_input(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct pc87427_data *data = pc87427_update_device(dev);
+ int nr = attr->index;
+
+ return sprintf(buf, "%lu\n", fan_from_reg(data->fan[nr]));
+}
+
+static ssize_t show_fan_min(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct pc87427_data *data = pc87427_update_device(dev);
+ int nr = attr->index;
+
+ return sprintf(buf, "%lu\n", fan_from_reg(data->fan_min[nr]));
+}
+
+static ssize_t show_fan_alarm(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct pc87427_data *data = pc87427_update_device(dev);
+ int nr = attr->index;
+
+ return sprintf(buf, "%d\n", !!(data->fan_status[nr]
+ & FAN_STATUS_LOSPD));
+}
+
+static ssize_t show_fan_fault(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct pc87427_data *data = pc87427_update_device(dev);
+ int nr = attr->index;
+
+ return sprintf(buf, "%d\n", !!(data->fan_status[nr]
+ & FAN_STATUS_STALL));
+}
+
+static ssize_t set_fan_min(struct device *dev, struct device_attribute
+ *devattr, const char *buf, size_t count)
+{
+ struct pc87427_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
+ unsigned long val = simple_strtoul(buf, NULL, 10);
+ int iobase = data->address[LD_FAN];
+
+ mutex_lock(&data->lock);
+ outb(BANK_FM(nr), iobase + PC87427_REG_BANK);
+ /* The low speed limit registers are read-only while monitoring
+ is enabled, so we have to disable monitoring, then change the
+ limit, and finally enable monitoring again. */
+ outb(0, iobase + PC87427_REG_FAN_STATUS);
+ data->fan_min[nr] = fan_to_reg(val);
+ outw(data->fan_min[nr], iobase + PC87427_REG_FAN_MIN);
+ outb(FAN_STATUS_MONEN, iobase + PC87427_REG_FAN_STATUS);
+ mutex_unlock(&data->lock);
+
+ return count;
+}
+
+static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan_input, NULL, 0);
+static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan_input, NULL, 1);
+static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan_input, NULL, 2);
+static SENSOR_DEVICE_ATTR(fan4_input, S_IRUGO, show_fan_input, NULL, 3);
+static SENSOR_DEVICE_ATTR(fan5_input, S_IRUGO, show_fan_input, NULL, 4);
+static SENSOR_DEVICE_ATTR(fan6_input, S_IRUGO, show_fan_input, NULL, 5);
+static SENSOR_DEVICE_ATTR(fan7_input, S_IRUGO, show_fan_input, NULL, 6);
+static SENSOR_DEVICE_ATTR(fan8_input, S_IRUGO, show_fan_input, NULL, 7);
+
+static SENSOR_DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO,
+ show_fan_min, set_fan_min, 0);
+static SENSOR_DEVICE_ATTR(fan2_min, S_IWUSR | S_IRUGO,
+ show_fan_min, set_fan_min, 1);
+static SENSOR_DEVICE_ATTR(fan3_min, S_IWUSR | S_IRUGO,
+ show_fan_min, set_fan_min, 2);
+static SENSOR_DEVICE_ATTR(fan4_min, S_IWUSR | S_IRUGO,
+ show_fan_min, set_fan_min, 3);
+static SENSOR_DEVICE_ATTR(fan5_min, S_IWUSR | S_IRUGO,
+ show_fan_min, set_fan_min, 4);
+static SENSOR_DEVICE_ATTR(fan6_min, S_IWUSR | S_IRUGO,
+ show_fan_min, set_fan_min, 5);
+static SENSOR_DEVICE_ATTR(fan7_min, S_IWUSR | S_IRUGO,
+ show_fan_min, set_fan_min, 6);
+static SENSOR_DEVICE_ATTR(fan8_min, S_IWUSR | S_IRUGO,
+ show_fan_min, set_fan_min, 7);
+
+static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_fan_alarm, NULL, 0);
+static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_fan_alarm, NULL, 1);
+static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_fan_alarm, NULL, 2);
+static SENSOR_DEVICE_ATTR(fan4_alarm, S_IRUGO, show_fan_alarm, NULL, 3);
+static SENSOR_DEVICE_ATTR(fan5_alarm, S_IRUGO, show_fan_alarm, NULL, 4);
+static SENSOR_DEVICE_ATTR(fan6_alarm, S_IRUGO, show_fan_alarm, NULL, 5);
+static SENSOR_DEVICE_ATTR(fan7_alarm, S_IRUGO, show_fan_alarm, NULL, 6);
+static SENSOR_DEVICE_ATTR(fan8_alarm, S_IRUGO, show_fan_alarm, NULL, 7);
+
+static SENSOR_DEVICE_ATTR(fan1_fault, S_IRUGO, show_fan_fault, NULL, 0);
+static SENSOR_DEVICE_ATTR(fan2_fault, S_IRUGO, show_fan_fault, NULL, 1);
+static SENSOR_DEVICE_ATTR(fan3_fault, S_IRUGO, show_fan_fault, NULL, 2);
+static SENSOR_DEVICE_ATTR(fan4_fault, S_IRUGO, show_fan_fault, NULL, 3);
+static SENSOR_DEVICE_ATTR(fan5_fault, S_IRUGO, show_fan_fault, NULL, 4);
+static SENSOR_DEVICE_ATTR(fan6_fault, S_IRUGO, show_fan_fault, NULL, 5);
+static SENSOR_DEVICE_ATTR(fan7_fault, S_IRUGO, show_fan_fault, NULL, 6);
+static SENSOR_DEVICE_ATTR(fan8_fault, S_IRUGO, show_fan_fault, NULL, 7);
+
+static struct attribute *pc87427_attributes_fan[8][5] = {
+ {
+ &sensor_dev_attr_fan1_input.dev_attr.attr,
+ &sensor_dev_attr_fan1_min.dev_attr.attr,
+ &sensor_dev_attr_fan1_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan1_fault.dev_attr.attr,
+ NULL
+ }, {
+ &sensor_dev_attr_fan2_input.dev_attr.attr,
+ &sensor_dev_attr_fan2_min.dev_attr.attr,
+ &sensor_dev_attr_fan2_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan2_fault.dev_attr.attr,
+ NULL
+ }, {
+ &sensor_dev_attr_fan3_input.dev_attr.attr,
+ &sensor_dev_attr_fan3_min.dev_attr.attr,
+ &sensor_dev_attr_fan3_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan3_fault.dev_attr.attr,
+ NULL
+ }, {
+ &sensor_dev_attr_fan4_input.dev_attr.attr,
+ &sensor_dev_attr_fan4_min.dev_attr.attr,
+ &sensor_dev_attr_fan4_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan4_fault.dev_attr.attr,
+ NULL
+ }, {
+ &sensor_dev_attr_fan5_input.dev_attr.attr,
+ &sensor_dev_attr_fan5_min.dev_attr.attr,
+ &sensor_dev_attr_fan5_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan5_fault.dev_attr.attr,
+ NULL
+ }, {
+ &sensor_dev_attr_fan6_input.dev_attr.attr,
+ &sensor_dev_attr_fan6_min.dev_attr.attr,
+ &sensor_dev_attr_fan6_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan6_fault.dev_attr.attr,
+ NULL
+ }, {
+ &sensor_dev_attr_fan7_input.dev_attr.attr,
+ &sensor_dev_attr_fan7_min.dev_attr.attr,
+ &sensor_dev_attr_fan7_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan7_fault.dev_attr.attr,
+ NULL
+ }, {
+ &sensor_dev_attr_fan8_input.dev_attr.attr,
+ &sensor_dev_attr_fan8_min.dev_attr.attr,
+ &sensor_dev_attr_fan8_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan8_fault.dev_attr.attr,
+ NULL
+ }
+};
+
+static const struct attribute_group pc87427_group_fan[8] = {
+ { .attrs = pc87427_attributes_fan[0] },
+ { .attrs = pc87427_attributes_fan[1] },
+ { .attrs = pc87427_attributes_fan[2] },
+ { .attrs = pc87427_attributes_fan[3] },
+ { .attrs = pc87427_attributes_fan[4] },
+ { .attrs = pc87427_attributes_fan[5] },
+ { .attrs = pc87427_attributes_fan[6] },
+ { .attrs = pc87427_attributes_fan[7] },
+};
+
+static ssize_t show_name(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct pc87427_data *data = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%s\n", data->name);
+}
+static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
+
+
+/*
+ * Device detection, attach and detach
+ */
+
+static void __devinit pc87427_init_device(struct device *dev)
+{
+ struct pc87427_data *data = dev_get_drvdata(dev);
+ int i;
+ u8 reg;
+
+ /* The FMC module should be ready */
+ reg = pc87427_read8(data, LD_FAN, PC87427_REG_BANK);
+ if (!(reg & 0x80))
+ dev_warn(dev, "FMC module not ready!\n");
+
+ /* Check which fans are enabled */
+ for (i = 0; i < 8; i++) {
+ reg = pc87427_read8_bank(data, LD_FAN, BANK_FM(i),
+ PC87427_REG_FAN_STATUS);
+ if (reg & FAN_STATUS_MONEN)
+ data->fan_enabled |= (1 << i);
+ }
+
+ if (!data->fan_enabled) {
+ dev_dbg(dev, "Enabling all fan inputs\n");
+ for (i = 0; i < 8; i++)
+ pc87427_write8_bank(data, LD_FAN, BANK_FM(i),
+ PC87427_REG_FAN_STATUS,
+ FAN_STATUS_MONEN);
+ data->fan_enabled = 0xff;
+ }
+}
+
+static int __devinit pc87427_probe(struct platform_device *pdev)
+{
+ struct pc87427_data *data;
+ struct resource *res;
+ int i, err;
+
+ if (!(data = kzalloc(sizeof(struct pc87427_data), GFP_KERNEL))) {
+ err = -ENOMEM;
+ printk(KERN_ERR DRVNAME ": Out of memory\n");
+ goto exit;
+ }
+
+ /* This will need to be revisited when we add support for
+ temperature and voltage monitoring. */
+ res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ data->address[0] = res->start;
+
+ mutex_init(&data->lock);
+ data->name = "pc87427";
+ platform_set_drvdata(pdev, data);
+ pc87427_init_device(&pdev->dev);
+
+ /* Register sysfs hooks */
+ if ((err = device_create_file(&pdev->dev, &dev_attr_name)))
+ goto exit_kfree;
+ for (i = 0; i < 8; i++) {
+ if (!(data->fan_enabled & (1 << i)))
+ continue;
+ if ((err = sysfs_create_group(&pdev->dev.kobj,
+ &pc87427_group_fan[i])))
+ goto exit_remove_files;
+ }
+
+ data->class_dev = hwmon_device_register(&pdev->dev);
+ if (IS_ERR(data->class_dev)) {
+ err = PTR_ERR(data->class_dev);
+ dev_err(&pdev->dev, "Class registration failed (%d)\n", err);
+ goto exit_remove_files;
+ }
+
+ return 0;
+
+exit_remove_files:
+ for (i = 0; i < 8; i++) {
+ if (!(data->fan_enabled & (1 << i)))
+ continue;
+ sysfs_remove_group(&pdev->dev.kobj, &pc87427_group_fan[i]);
+ }
+exit_kfree:
+ platform_set_drvdata(pdev, NULL);
+ kfree(data);
+exit:
+ return err;
+}
+
+static int __devexit pc87427_remove(struct platform_device *pdev)
+{
+ struct pc87427_data *data = platform_get_drvdata(pdev);
+ int i;
+
+ platform_set_drvdata(pdev, NULL);
+ hwmon_device_unregister(data->class_dev);
+ device_remove_file(&pdev->dev, &dev_attr_name);
+ for (i = 0; i < 8; i++) {
+ if (!(data->fan_enabled & (1 << i)))
+ continue;
+ sysfs_remove_group(&pdev->dev.kobj, &pc87427_group_fan[i]);
+ }
+ kfree(data);
+
+ return 0;
+}
+
+
+static struct platform_driver pc87427_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = DRVNAME,
+ },
+ .probe = pc87427_probe,
+ .remove = __devexit_p(pc87427_remove),
+};
+
+static int __init pc87427_device_add(unsigned short address)
+{
+ struct resource res = {
+ .start = address,
+ .end = address + REGION_LENGTH - 1,
+ .name = logdev_str[0],
+ .flags = IORESOURCE_IO,
+ };
+ int err;
+
+ pdev = platform_device_alloc(DRVNAME, address);
+ if (!pdev) {
+ err = -ENOMEM;
+ printk(KERN_ERR DRVNAME ": Device allocation failed\n");
+ goto exit;
+ }
+
+ err = platform_device_add_resources(pdev, &res, 1);
+ if (err) {
+ printk(KERN_ERR DRVNAME ": Device resource addition failed "
+ "(%d)\n", err);
+ goto exit_device_put;
+ }
+
+ err = platform_device_add(pdev);
+ if (err) {
+ printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
+ err);
+ goto exit_device_put;
+ }
+
+ return 0;
+
+exit_device_put:
+ platform_device_put(pdev);
+exit:
+ return err;
+}
+
+static int __init pc87427_find(int sioaddr, unsigned short *address)
+{
+ u16 val;
+ int i, err = 0;
+
+ /* Identify device */
+ val = superio_inb(sioaddr, SIOREG_DEVID);
+ if (val != 0xf2) { /* PC87427 */
+ err = -ENODEV;
+ goto exit;
+ }
+
+ for (i = 0; i < 2; i++) {
+ address[i] = 0;
+ /* Select logical device */
+ superio_outb(sioaddr, SIOREG_LDSEL, logdev[i]);
+
+ val = superio_inb(sioaddr, SIOREG_ACT);
+ if (!(val & 0x01)) {
+ printk(KERN_INFO DRVNAME ": Logical device 0x%02x "
+ "not activated\n", logdev[i]);
+ continue;
+ }
+
+ val = superio_inb(sioaddr, SIOREG_MAP);
+ if (val & 0x01) {
+ printk(KERN_WARNING DRVNAME ": Logical device 0x%02x "
+ "is memory-mapped, can't use\n", logdev[i]);
+ continue;
+ }
+
+ val = (superio_inb(sioaddr, SIOREG_IOBASE) << 8)
+ | superio_inb(sioaddr, SIOREG_IOBASE + 1);
+ if (!val) {
+ printk(KERN_INFO DRVNAME ": I/O base address not set "
+ "for logical device 0x%02x\n", logdev[i]);
+ continue;
+ }
+ address[i] = val;
+ }
+
+exit:
+ superio_exit(sioaddr);
+ return err;
+}
+
+static int __init pc87427_init(void)
+{
+ int err;
+ unsigned short address[2];
+
+ if (pc87427_find(0x2e, address)
+ && pc87427_find(0x4e, address))
+ return -ENODEV;
+
+ /* For now the driver only handles fans so we only care about the
+ first address. */
+ if (!address[0])
+ return -ENODEV;
+
+ err = platform_driver_register(&pc87427_driver);
+ if (err)
+ goto exit;
+
+ /* Sets global pdev as a side effect */
+ err = pc87427_device_add(address[0]);
+ if (err)
+ goto exit_driver;
+
+ return 0;
+
+exit_driver:
+ platform_driver_unregister(&pc87427_driver);
+exit:
+ return err;
+}
+
+static void __exit pc87427_exit(void)
+{
+ platform_device_unregister(pdev);
+ platform_driver_unregister(&pc87427_driver);
+}
+
+MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
+MODULE_DESCRIPTION("PC87427 hardware monitoring driver");
+MODULE_LICENSE("GPL");
+
+module_init(pc87427_init);
+module_exit(pc87427_exit);
diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c
index 2257806..212a155 100644
--- a/drivers/hwmon/w83627ehf.c
+++ b/drivers/hwmon/w83627ehf.c
@@ -3,7 +3,7 @@
the Winbond W83627EHF Super-I/O chip
Copyright (C) 2005 Jean Delvare <khali@linux-fr.org>
Copyright (C) 2006 Yuan Mu (Winbond),
- Rudolf Marek <r.marek@sh.cvut.cz>
+ Rudolf Marek <r.marek@assembler.cz>
David Hubbard <david.c.hubbard@gmail.com>
Shamelessly ripped from the w83627hf driver
diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c
index 4e10826..b0fa296 100644
--- a/drivers/hwmon/w83792d.c
+++ b/drivers/hwmon/w83792d.c
@@ -3,7 +3,7 @@
monitoring
Copyright (C) 2004, 2005 Winbond Electronics Corp.
Chunhao Huang <DZShen@Winbond.com.tw>,
- Rudolf Marek <r.marek@sh.cvut.cz>
+ Rudolf Marek <r.marek@assembler.cz>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
diff --git a/drivers/hwmon/w83793.c b/drivers/hwmon/w83793.c
new file mode 100644
index 0000000..c12ac5a
--- /dev/null
+++ b/drivers/hwmon/w83793.c
@@ -0,0 +1,1609 @@
+/*
+ w83793.c - Linux kernel driver for hardware monitoring
+ Copyright (C) 2006 Winbond Electronics Corp.
+ Yuan Mu
+ Rudolf Marek <r.marek@assembler.cz>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation - version 2.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ 02110-1301 USA.
+*/
+
+/*
+ Supports following chips:
+
+ Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA
+ w83793 10 12 8 6 0x7b 0x5ca3 yes no
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-vid.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f, I2C_CLIENT_END };
+
+/* Insmod parameters */
+I2C_CLIENT_INSMOD_1(w83793);
+I2C_CLIENT_MODULE_PARM(force_subclients, "List of subclient addresses: "
+ "{bus, clientaddr, subclientaddr1, subclientaddr2}");
+
+static int reset;
+module_param(reset, bool, 0);
+MODULE_PARM_DESC(reset, "Set to 1 to reset chip, not recommended");
+
+/*
+ Address 0x00, 0x0d, 0x0e, 0x0f in all three banks are reserved
+ as ID, Bank Select registers
+*/
+#define W83793_REG_BANKSEL 0x00
+#define W83793_REG_VENDORID 0x0d
+#define W83793_REG_CHIPID 0x0e
+#define W83793_REG_DEVICEID 0x0f
+
+#define W83793_REG_CONFIG 0x40
+#define W83793_REG_MFC 0x58
+#define W83793_REG_FANIN_CTRL 0x5c
+#define W83793_REG_FANIN_SEL 0x5d
+#define W83793_REG_I2C_ADDR 0x0b
+#define W83793_REG_I2C_SUBADDR 0x0c
+#define W83793_REG_VID_INA 0x05
+#define W83793_REG_VID_INB 0x06
+#define W83793_REG_VID_LATCHA 0x07
+#define W83793_REG_VID_LATCHB 0x08
+#define W83793_REG_VID_CTRL 0x59
+
+static u16 W83793_REG_TEMP_MODE[2] = { 0x5e, 0x5f };
+
+#define TEMP_READ 0
+#define TEMP_CRIT 1
+#define TEMP_CRIT_HYST 2
+#define TEMP_WARN 3
+#define TEMP_WARN_HYST 4
+/* only crit and crit_hyst affect real-time alarm status
+ current crit crit_hyst warn warn_hyst */
+static u16 W83793_REG_TEMP[][5] = {
+ {0x1c, 0x78, 0x79, 0x7a, 0x7b},
+ {0x1d, 0x7c, 0x7d, 0x7e, 0x7f},
+ {0x1e, 0x80, 0x81, 0x82, 0x83},
+ {0x1f, 0x84, 0x85, 0x86, 0x87},
+ {0x20, 0x88, 0x89, 0x8a, 0x8b},
+ {0x21, 0x8c, 0x8d, 0x8e, 0x8f},
+};
+
+#define W83793_REG_TEMP_LOW_BITS 0x22
+
+#define W83793_REG_BEEP(index) (0x53 + (index))
+#define W83793_REG_ALARM(index) (0x4b + (index))
+
+#define W83793_REG_CLR_CHASSIS 0x4a /* SMI MASK4 */
+#define W83793_REG_IRQ_CTRL 0x50
+#define W83793_REG_OVT_CTRL 0x51
+#define W83793_REG_OVT_BEEP 0x52
+
+#define IN_READ 0
+#define IN_MAX 1
+#define IN_LOW 2
+static const u16 W83793_REG_IN[][3] = {
+ /* Current, High, Low */
+ {0x10, 0x60, 0x61}, /* Vcore A */
+ {0x11, 0x62, 0x63}, /* Vcore B */
+ {0x12, 0x64, 0x65}, /* Vtt */
+ {0x14, 0x6a, 0x6b}, /* VSEN1 */
+ {0x15, 0x6c, 0x6d}, /* VSEN2 */
+ {0x16, 0x6e, 0x6f}, /* +3VSEN */
+ {0x17, 0x70, 0x71}, /* +12VSEN */
+ {0x18, 0x72, 0x73}, /* 5VDD */
+ {0x19, 0x74, 0x75}, /* 5VSB */
+ {0x1a, 0x76, 0x77}, /* VBAT */
+};
+
+/* Low Bits of Vcore A/B Vtt Read/High/Low */
+static const u16 W83793_REG_IN_LOW_BITS[] = { 0x1b, 0x68, 0x69 };
+static u8 scale_in[] = { 2, 2, 2, 16, 16, 16, 8, 24, 24, 16 };
+
+#define W83793_REG_FAN(index) (0x23 + 2 * (index)) /* High byte */
+#define W83793_REG_FAN_MIN(index) (0x90 + 2 * (index)) /* High byte */
+
+#define W83793_REG_PWM_DEFAULT 0xb2
+#define W83793_REG_PWM_ENABLE 0x207
+#define W83793_REG_PWM_UPTIME 0xc3 /* Unit in 0.1 second */
+#define W83793_REG_PWM_DOWNTIME 0xc4 /* Unit in 0.1 second */
+#define W83793_REG_TEMP_CRITICAL 0xc5
+
+#define PWM_DUTY 0
+#define PWM_START 1
+#define PWM_NONSTOP 2
+#define W83793_REG_PWM(index, nr) (((nr) == 0 ? 0xb3 : \
+ (nr) == 1 ? 0x220 : 0x218) + (index))
+
+/* bit field, fan1 is bit0, fan2 is bit1 ... */
+#define W83793_REG_TEMP_FAN_MAP(index) (0x201 + (index))
+#define W83793_REG_TEMP_TOL(index) (0x208 + (index))
+#define W83793_REG_TEMP_CRUISE(index) (0x210 + (index))
+#define W83793_REG_PWM_STOP_TIME(index) (0x228 + (index))
+#define W83793_REG_SF2_TEMP(index, nr) (0x230 + ((index) << 4) + (nr))
+#define W83793_REG_SF2_PWM(index, nr) (0x238 + ((index) << 4) + (nr))
+
+static inline unsigned long FAN_FROM_REG(u16 val)
+{
+ if ((val >= 0xfff) || (val == 0))
+ return 0;
+ return (1350000UL / val);
+}
+
+static inline u16 FAN_TO_REG(long rpm)
+{
+ if (rpm <= 0)
+ return 0x0fff;
+ return SENSORS_LIMIT((1350000 + (rpm >> 1)) / rpm, 1, 0xffe);
+}
+
+static inline unsigned long TIME_FROM_REG(u8 reg)
+{
+ return (reg * 100);
+}
+
+static inline u8 TIME_TO_REG(unsigned long val)
+{
+ return SENSORS_LIMIT((val + 50) / 100, 0, 0xff);
+}
+
+static inline long TEMP_FROM_REG(s8 reg)
+{
+ return (reg * 1000);
+}
+
+static inline s8 TEMP_TO_REG(long val, s8 min, s8 max)
+{
+ return SENSORS_LIMIT((val + (val < 0 ? -500 : 500)) / 1000, min, max);
+}
+
+struct w83793_data {
+ struct i2c_client client;
+ struct i2c_client *lm75[2];
+ struct class_device *class_dev;
+ struct mutex update_lock;
+ char valid; /* !=0 if following fields are valid */
+ unsigned long last_updated; /* In jiffies */
+ unsigned long last_nonvolatile; /* In jiffies, last time we update the
+ nonvolatile registers */
+
+ u8 bank;
+ u8 vrm;
+ u8 vid[2];
+ u8 in[10][3]; /* Register value, read/high/low */
+ u8 in_low_bits[3]; /* Additional resolution for VCore A/B Vtt */
+
+ u16 has_fan; /* Only fan1- fan5 has own pins */
+ u16 fan[12]; /* Register value combine */
+ u16 fan_min[12]; /* Register value combine */
+
+ s8 temp[6][5]; /* current, crit, crit_hyst,warn, warn_hyst */
+ u8 temp_low_bits; /* Additional resolution TD1-TD4 */
+ u8 temp_mode[2]; /* byte 0: Temp D1-D4 mode each has 2 bits
+ byte 1: Temp R1,R2 mode, each has 1 bit */
+ u8 temp_critical; /* If reached all fan will be at full speed */
+ u8 temp_fan_map[6]; /* Temp controls which pwm fan, bit field */
+
+ u8 has_pwm;
+ u8 pwm_enable; /* Register value, each Temp has 1 bit */
+ u8 pwm_uptime; /* Register value */
+ u8 pwm_downtime; /* Register value */
+ u8 pwm_default; /* All fan default pwm, next poweron valid */
+ u8 pwm[8][3]; /* Register value */
+ u8 pwm_stop_time[8];
+ u8 temp_cruise[6];
+
+ u8 alarms[5]; /* realtime status registers */
+ u8 beeps[5];
+ u8 beep_enable;
+ u8 tolerance[3]; /* Temp tolerance(Smart Fan I/II) */
+ u8 sf2_pwm[6][7]; /* Smart FanII: Fan duty cycle */
+ u8 sf2_temp[6][7]; /* Smart FanII: Temp level point */
+};
+
+static u8 w83793_read_value(struct i2c_client *client, u16 reg);
+static int w83793_write_value(struct i2c_client *client, u16 reg, u8 value);
+static int w83793_attach_adapter(struct i2c_adapter *adapter);
+static int w83793_detect(struct i2c_adapter *adapter, int address, int kind);
+static int w83793_detach_client(struct i2c_client *client);
+static void w83793_init_client(struct i2c_client *client);
+static void w83793_update_nonvolatile(struct device *dev);
+static struct w83793_data *w83793_update_device(struct device *dev);
+
+static struct i2c_driver w83793_driver = {
+ .driver = {
+ .name = "w83793",
+ },
+ .attach_adapter = w83793_attach_adapter,
+ .detach_client = w83793_detach_client,
+};
+
+static ssize_t
+show_vrm(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83793_data *data = i2c_get_clientdata(client);
+
+ return sprintf(buf, "%d\n", data->vrm);
+}
+
+static ssize_t
+show_vid(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct w83793_data *data = w83793_update_device(dev);
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int index = sensor_attr->index;
+
+ return sprintf(buf, "%d\n", vid_from_reg(data->vid[index], data->vrm));
+}
+
+static ssize_t
+store_vrm(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83793_data *data = i2c_get_clientdata(client);
+
+ data->vrm = simple_strtoul(buf, NULL, 10);
+ return count;
+}
+
+#define ALARM_STATUS 0
+#define BEEP_ENABLE 1
+static ssize_t
+show_alarm_beep(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct w83793_data *data = w83793_update_device(dev);
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index >> 3;
+ int bit = sensor_attr->index & 0x07;
+ u8 val;
+
+ if (ALARM_STATUS == nr) {
+ val = (data->alarms[index] >> (bit)) & 1;
+ } else { /* BEEP_ENABLE */
+ val = (data->beeps[index] >> (bit)) & 1;
+ }
+
+ return sprintf(buf, "%u\n", val);
+}
+
+static ssize_t
+store_beep(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83793_data *data = i2c_get_clientdata(client);
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int index = sensor_attr->index >> 3;
+ int shift = sensor_attr->index & 0x07;
+ u8 beep_bit = 1 << shift;
+ u8 val;
+
+ val = simple_strtoul(buf, NULL, 10);
+ if (val != 0 && val != 1)
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ data->beeps[index] = w83793_read_value(client, W83793_REG_BEEP(index));
+ data->beeps[index] &= ~beep_bit;
+ data->beeps[index] |= val << shift;
+ w83793_write_value(client, W83793_REG_BEEP(index), data->beeps[index]);
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+static ssize_t
+show_beep_enable(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct w83793_data *data = w83793_update_device(dev);
+ return sprintf(buf, "%u\n", (data->beep_enable >> 1) & 0x01);
+}
+
+static ssize_t
+store_beep_enable(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83793_data *data = i2c_get_clientdata(client);
+ u8 val = simple_strtoul(buf, NULL, 10);
+
+ if (val != 0 && val != 1)
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ data->beep_enable = w83793_read_value(client, W83793_REG_OVT_BEEP)
+ & 0xfd;
+ data->beep_enable |= val << 1;
+ w83793_write_value(client, W83793_REG_OVT_BEEP, data->beep_enable);
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+/* Write any value to clear chassis alarm */
+static ssize_t
+store_chassis_clear(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83793_data *data = i2c_get_clientdata(client);
+ u8 val;
+
+ mutex_lock(&data->update_lock);
+ val = w83793_read_value(client, W83793_REG_CLR_CHASSIS);
+ val |= 0x80;
+ w83793_write_value(client, W83793_REG_CLR_CHASSIS, val);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+#define FAN_INPUT 0
+#define FAN_MIN 1
+static ssize_t
+show_fan(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+ struct w83793_data *data = w83793_update_device(dev);
+ u16 val;
+
+ if (FAN_INPUT == nr) {
+ val = data->fan[index] & 0x0fff;
+ } else {
+ val = data->fan_min[index] & 0x0fff;
+ }
+
+ return sprintf(buf, "%lu\n", FAN_FROM_REG(val));
+}
+
+static ssize_t
+store_fan_min(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int index = sensor_attr->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83793_data *data = i2c_get_clientdata(client);
+ u16 val = FAN_TO_REG(simple_strtoul(buf, NULL, 10));
+
+ mutex_lock(&data->update_lock);
+ data->fan_min[index] = val;
+ w83793_write_value(client, W83793_REG_FAN_MIN(index),
+ (val >> 8) & 0xff);
+ w83793_write_value(client, W83793_REG_FAN_MIN(index) + 1, val & 0xff);
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+#define PWM_DUTY 0
+#define PWM_START 1
+#define PWM_NONSTOP 2
+#define PWM_STOP_TIME 3
+static ssize_t
+show_pwm(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ struct w83793_data *data = w83793_update_device(dev);
+ u16 val;
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+
+ if (PWM_STOP_TIME == nr)
+ val = TIME_FROM_REG(data->pwm_stop_time[index]);
+ else
+ val = (data->pwm[index][nr] & 0x3f) << 2;
+
+ return sprintf(buf, "%d\n", val);
+}
+
+static ssize_t
+store_pwm(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83793_data *data = i2c_get_clientdata(client);
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+ u8 val;
+
+ mutex_lock(&data->update_lock);
+ if (PWM_STOP_TIME == nr) {
+ val = TIME_TO_REG(simple_strtoul(buf, NULL, 10));
+ data->pwm_stop_time[index] = val;
+ w83793_write_value(client, W83793_REG_PWM_STOP_TIME(index),
+ val);
+ } else {
+ val = SENSORS_LIMIT(simple_strtoul(buf, NULL, 10), 0, 0xff)
+ >> 2;
+ data->pwm[index][nr] =
+ w83793_read_value(client, W83793_REG_PWM(index, nr)) & 0xc0;
+ data->pwm[index][nr] |= val;
+ w83793_write_value(client, W83793_REG_PWM(index, nr),
+ data->pwm[index][nr]);
+ }
+
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static ssize_t
+show_temp(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+ struct w83793_data *data = w83793_update_device(dev);
+ long temp = TEMP_FROM_REG(data->temp[index][nr]);
+
+ if (TEMP_READ == nr && index < 4) { /* Only TD1-TD4 have low bits */
+ int low = ((data->temp_low_bits >> (index * 2)) & 0x03) * 250;
+ temp += temp > 0 ? low : -low;
+ }
+ return sprintf(buf, "%ld\n", temp);
+}
+
+static ssize_t
+store_temp(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83793_data *data = i2c_get_clientdata(client);
+ long tmp = simple_strtol(buf, NULL, 10);
+
+ mutex_lock(&data->update_lock);
+ data->temp[index][nr] = TEMP_TO_REG(tmp, -128, 127);
+ w83793_write_value(client, W83793_REG_TEMP[index][nr],
+ data->temp[index][nr]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+/*
+ TD1-TD4
+ each has 4 mode:(2 bits)
+ 0: Stop monitor
+ 1: Use internal temp sensor(default)
+ 2: Use sensor in AMD CPU and get result by AMDSI
+ 3: Use sensor in Intel CPU and get result by PECI
+
+ TR1-TR2
+ each has 2 mode:(1 bit)
+ 0: Disable temp sensor monitor
+ 1: To enable temp sensors monitor
+*/
+
+/* 0 disable, 5 AMDSI, 6 PECI */
+static u8 TO_TEMP_MODE[] = { 0, 0, 5, 6 };
+
+static ssize_t
+show_temp_mode(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct w83793_data *data = w83793_update_device(dev);
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int index = sensor_attr->index;
+ u8 mask = (index < 4) ? 0x03 : 0x01;
+ u8 shift = (index < 4) ? (2 * index) : (index - 4);
+ u8 tmp;
+ index = (index < 4) ? 0 : 1;
+
+ tmp = (data->temp_mode[index] >> shift) & mask;
+
+ /* for the internal sensor, found out if diode or thermistor */
+ if (tmp == 1) {
+ tmp = index == 0 ? 3 : 4;
+ } else {
+ tmp = TO_TEMP_MODE[tmp];
+ }
+
+ return sprintf(buf, "%d\n", tmp);
+}
+
+static ssize_t
+store_temp_mode(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83793_data *data = i2c_get_clientdata(client);
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int index = sensor_attr->index;
+ u8 mask = (index < 4) ? 0x03 : 0x01;
+ u8 shift = (index < 4) ? (2 * index) : (index - 4);
+ u8 val = simple_strtoul(buf, NULL, 10);
+
+ /* transform the sysfs interface values into table above */
+ if ((val == 5 || val == 6) && (index < 4)) {
+ val -= 3;
+ } else if ((val == 3 && index < 4)
+ || (val == 4 && index >= 4)
+ || val == 0) {
+ /* transform diode or thermistor into internal enable */
+ val = !!val;
+ } else {
+ return -EINVAL;
+ }
+
+ index = (index < 4) ? 0 : 1;
+ mutex_lock(&data->update_lock);
+ data->temp_mode[index] =
+ w83793_read_value(client, W83793_REG_TEMP_MODE[index]);
+ data->temp_mode[index] &= ~(mask << shift);
+ data->temp_mode[index] |= val << shift;
+ w83793_write_value(client, W83793_REG_TEMP_MODE[index],
+ data->temp_mode[index]);
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+#define SETUP_PWM_DEFAULT 0
+#define SETUP_PWM_UPTIME 1 /* Unit in 0.1s */
+#define SETUP_PWM_DOWNTIME 2 /* Unit in 0.1s */
+#define SETUP_TEMP_CRITICAL 3
+static ssize_t
+show_sf_setup(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ struct w83793_data *data = w83793_update_device(dev);
+ u32 val = 0;
+
+ if (SETUP_PWM_DEFAULT == nr) {
+ val = (data->pwm_default & 0x3f) << 2;
+ } else if (SETUP_PWM_UPTIME == nr) {
+ val = TIME_FROM_REG(data->pwm_uptime);
+ } else if (SETUP_PWM_DOWNTIME == nr) {
+ val = TIME_FROM_REG(data->pwm_downtime);
+ } else if (SETUP_TEMP_CRITICAL == nr) {
+ val = TEMP_FROM_REG(data->temp_critical & 0x7f);
+ }
+
+ return sprintf(buf, "%d\n", val);
+}
+
+static ssize_t
+store_sf_setup(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83793_data *data = i2c_get_clientdata(client);
+
+ mutex_lock(&data->update_lock);
+ if (SETUP_PWM_DEFAULT == nr) {
+ data->pwm_default =
+ w83793_read_value(client, W83793_REG_PWM_DEFAULT) & 0xc0;
+ data->pwm_default |= SENSORS_LIMIT(simple_strtoul(buf, NULL,
+ 10),
+ 0, 0xff) >> 2;
+ w83793_write_value(client, W83793_REG_PWM_DEFAULT,
+ data->pwm_default);
+ } else if (SETUP_PWM_UPTIME == nr) {
+ data->pwm_uptime = TIME_TO_REG(simple_strtoul(buf, NULL, 10));
+ data->pwm_uptime += data->pwm_uptime == 0 ? 1 : 0;
+ w83793_write_value(client, W83793_REG_PWM_UPTIME,
+ data->pwm_uptime);
+ } else if (SETUP_PWM_DOWNTIME == nr) {
+ data->pwm_downtime = TIME_TO_REG(simple_strtoul(buf, NULL, 10));
+ data->pwm_downtime += data->pwm_downtime == 0 ? 1 : 0;
+ w83793_write_value(client, W83793_REG_PWM_DOWNTIME,
+ data->pwm_downtime);
+ } else { /* SETUP_TEMP_CRITICAL */
+ data->temp_critical =
+ w83793_read_value(client, W83793_REG_TEMP_CRITICAL) & 0x80;
+ data->temp_critical |= TEMP_TO_REG(simple_strtol(buf, NULL, 10),
+ 0, 0x7f);
+ w83793_write_value(client, W83793_REG_TEMP_CRITICAL,
+ data->temp_critical);
+ }
+
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+/*
+ Temp SmartFan control
+ TEMP_FAN_MAP
+ Temp channel control which pwm fan, bitfield, bit 0 indicate pwm1...
+ It's possible two or more temp channels control the same fan, w83793
+ always prefers to pick the most critical request and applies it to
+ the related Fan.
+ It's possible one fan is not in any mapping of 6 temp channels, this
+ means the fan is manual mode
+
+ TEMP_PWM_ENABLE
+ Each temp channel has its own SmartFan mode, and temp channel
+ control fans that are set by TEMP_FAN_MAP
+ 0: SmartFanII mode
+ 1: Thermal Cruise Mode
+
+ TEMP_CRUISE
+ Target temperature in thermal cruise mode, w83793 will try to turn
+ fan speed to keep the temperature of target device around this
+ temperature.
+
+ TEMP_TOLERANCE
+ If Temp higher or lower than target with this tolerance, w83793
+ will take actions to speed up or slow down the fan to keep the
+ temperature within the tolerance range.
+*/
+
+#define TEMP_FAN_MAP 0
+#define TEMP_PWM_ENABLE 1
+#define TEMP_CRUISE 2
+#define TEMP_TOLERANCE 3
+static ssize_t
+show_sf_ctrl(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+ struct w83793_data *data = w83793_update_device(dev);
+ u32 val;
+
+ if (TEMP_FAN_MAP == nr) {
+ val = data->temp_fan_map[index];
+ } else if (TEMP_PWM_ENABLE == nr) {
+ /* +2 to transfrom into 2 and 3 to conform with sysfs intf */
+ val = ((data->pwm_enable >> index) & 0x01) + 2;
+ } else if (TEMP_CRUISE == nr) {
+ val = TEMP_FROM_REG(data->temp_cruise[index] & 0x7f);
+ } else { /* TEMP_TOLERANCE */
+ val = data->tolerance[index >> 1] >> ((index & 0x01) ? 4 : 0);
+ val = TEMP_FROM_REG(val & 0x0f);
+ }
+ return sprintf(buf, "%d\n", val);
+}
+
+static ssize_t
+store_sf_ctrl(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83793_data *data = i2c_get_clientdata(client);
+ u32 val;
+
+ mutex_lock(&data->update_lock);
+ if (TEMP_FAN_MAP == nr) {
+ val = simple_strtoul(buf, NULL, 10) & 0xff;
+ w83793_write_value(client, W83793_REG_TEMP_FAN_MAP(index), val);
+ data->temp_fan_map[index] = val;
+ } else if (TEMP_PWM_ENABLE == nr) {
+ val = simple_strtoul(buf, NULL, 10);
+ if (2 == val || 3 == val) {
+ data->pwm_enable =
+ w83793_read_value(client, W83793_REG_PWM_ENABLE);
+ if (val - 2)
+ data->pwm_enable |= 1 << index;
+ else
+ data->pwm_enable &= ~(1 << index);
+ w83793_write_value(client, W83793_REG_PWM_ENABLE,
+ data->pwm_enable);
+ } else {
+ mutex_unlock(&data->update_lock);
+ return -EINVAL;
+ }
+ } else if (TEMP_CRUISE == nr) {
+ data->temp_cruise[index] =
+ w83793_read_value(client, W83793_REG_TEMP_CRUISE(index));
+ val = TEMP_TO_REG(simple_strtol(buf, NULL, 10), 0, 0x7f);
+ data->temp_cruise[index] &= 0x80;
+ data->temp_cruise[index] |= val;
+
+ w83793_write_value(client, W83793_REG_TEMP_CRUISE(index),
+ data->temp_cruise[index]);
+ } else { /* TEMP_TOLERANCE */
+ int i = index >> 1;
+ u8 shift = (index & 0x01) ? 4 : 0;
+ data->tolerance[i] =
+ w83793_read_value(client, W83793_REG_TEMP_TOL(i));
+
+ val = TEMP_TO_REG(simple_strtol(buf, NULL, 10), 0, 0x0f);
+ data->tolerance[i] &= ~(0x0f << shift);
+ data->tolerance[i] |= val << shift;
+ w83793_write_value(client, W83793_REG_TEMP_TOL(i),
+ data->tolerance[i]);
+ }
+
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static ssize_t
+show_sf2_pwm(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+ struct w83793_data *data = w83793_update_device(dev);
+
+ return sprintf(buf, "%d\n", (data->sf2_pwm[index][nr] & 0x3f) << 2);
+}
+
+static ssize_t
+store_sf2_pwm(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83793_data *data = i2c_get_clientdata(client);
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+ u8 val = SENSORS_LIMIT(simple_strtoul(buf, NULL, 10), 0, 0xff) >> 2;
+
+ mutex_lock(&data->update_lock);
+ data->sf2_pwm[index][nr] =
+ w83793_read_value(client, W83793_REG_SF2_PWM(index, nr)) & 0xc0;
+ data->sf2_pwm[index][nr] |= val;
+ w83793_write_value(client, W83793_REG_SF2_PWM(index, nr),
+ data->sf2_pwm[index][nr]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static ssize_t
+show_sf2_temp(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+ struct w83793_data *data = w83793_update_device(dev);
+
+ return sprintf(buf, "%ld\n",
+ TEMP_FROM_REG(data->sf2_temp[index][nr] & 0x7f));
+}
+
+static ssize_t
+store_sf2_temp(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83793_data *data = i2c_get_clientdata(client);
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+ u8 val = TEMP_TO_REG(simple_strtol(buf, NULL, 10), 0, 0x7f);
+
+ mutex_lock(&data->update_lock);
+ data->sf2_temp[index][nr] =
+ w83793_read_value(client, W83793_REG_SF2_TEMP(index, nr)) & 0x80;
+ data->sf2_temp[index][nr] |= val;
+ w83793_write_value(client, W83793_REG_SF2_TEMP(index, nr),
+ data->sf2_temp[index][nr]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+/* only Vcore A/B and Vtt have additional 2 bits precision */
+static ssize_t
+show_in(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+ struct w83793_data *data = w83793_update_device(dev);
+ u16 val = data->in[index][nr];
+
+ if (index < 3) {
+ val <<= 2;
+ val += (data->in_low_bits[nr] >> (index * 2)) & 0x3;
+ }
+ return sprintf(buf, "%d\n", val * scale_in[index]);
+}
+
+static ssize_t
+store_in(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83793_data *data = i2c_get_clientdata(client);
+ u32 val;
+
+ val =
+ (simple_strtoul(buf, NULL, 10) +
+ scale_in[index] / 2) / scale_in[index];
+ mutex_lock(&data->update_lock);
+ if (index > 2) {
+ val = SENSORS_LIMIT(val, 0, 255);
+ } else {
+ val = SENSORS_LIMIT(val, 0, 0x3FF);
+ data->in_low_bits[nr] =
+ w83793_read_value(client, W83793_REG_IN_LOW_BITS[nr]);
+ data->in_low_bits[nr] &= ~(0x03 << (2 * index));
+ data->in_low_bits[nr] |= (val & 0x03) << (2 * index);
+ w83793_write_value(client, W83793_REG_IN_LOW_BITS[nr],
+ data->in_low_bits[nr]);
+ val >>= 2;
+ }
+ data->in[index][nr] = val;
+ w83793_write_value(client, W83793_REG_IN[index][nr],
+ data->in[index][nr]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+#define NOT_USED -1
+
+#define SENSOR_ATTR_IN(index) \
+ SENSOR_ATTR_2(in##index##_input, S_IRUGO, show_in, NULL, \
+ IN_READ, index), \
+ SENSOR_ATTR_2(in##index##_max, S_IRUGO | S_IWUSR, show_in, \
+ store_in, IN_MAX, index), \
+ SENSOR_ATTR_2(in##index##_min, S_IRUGO | S_IWUSR, show_in, \
+ store_in, IN_LOW, index), \
+ SENSOR_ATTR_2(in##index##_alarm, S_IRUGO, show_alarm_beep, \
+ NULL, ALARM_STATUS, index + ((index > 2) ? 1 : 0)), \
+ SENSOR_ATTR_2(in##index##_beep, S_IWUSR | S_IRUGO, \
+ show_alarm_beep, store_beep, BEEP_ENABLE, \
+ index + ((index > 2) ? 1 : 0))
+
+#define SENSOR_ATTR_FAN(index) \
+ SENSOR_ATTR_2(fan##index##_alarm, S_IRUGO, show_alarm_beep, \
+ NULL, ALARM_STATUS, index + 17), \
+ SENSOR_ATTR_2(fan##index##_beep, S_IWUSR | S_IRUGO, \
+ show_alarm_beep, store_beep, BEEP_ENABLE, index + 17), \
+ SENSOR_ATTR_2(fan##index##_input, S_IRUGO, show_fan, \
+ NULL, FAN_INPUT, index - 1), \
+ SENSOR_ATTR_2(fan##index##_min, S_IWUSR | S_IRUGO, \
+ show_fan, store_fan_min, FAN_MIN, index - 1)
+
+#define SENSOR_ATTR_PWM(index) \
+ SENSOR_ATTR_2(pwm##index, S_IWUSR | S_IRUGO, show_pwm, \
+ store_pwm, PWM_DUTY, index - 1), \
+ SENSOR_ATTR_2(pwm##index##_nonstop, S_IWUSR | S_IRUGO, \
+ show_pwm, store_pwm, PWM_NONSTOP, index - 1), \
+ SENSOR_ATTR_2(pwm##index##_start, S_IWUSR | S_IRUGO, \
+ show_pwm, store_pwm, PWM_START, index - 1), \
+ SENSOR_ATTR_2(pwm##index##_stop_time, S_IWUSR | S_IRUGO, \
+ show_pwm, store_pwm, PWM_STOP_TIME, index - 1)
+
+#define SENSOR_ATTR_TEMP(index) \
+ SENSOR_ATTR_2(temp##index##_type, S_IRUGO | S_IWUSR, \
+ show_temp_mode, store_temp_mode, NOT_USED, index - 1), \
+ SENSOR_ATTR_2(temp##index##_input, S_IRUGO, show_temp, \
+ NULL, TEMP_READ, index - 1), \
+ SENSOR_ATTR_2(temp##index##_max, S_IRUGO | S_IWUSR, show_temp, \
+ store_temp, TEMP_CRIT, index - 1), \
+ SENSOR_ATTR_2(temp##index##_max_hyst, S_IRUGO | S_IWUSR, \
+ show_temp, store_temp, TEMP_CRIT_HYST, index - 1), \
+ SENSOR_ATTR_2(temp##index##_warn, S_IRUGO | S_IWUSR, show_temp, \
+ store_temp, TEMP_WARN, index - 1), \
+ SENSOR_ATTR_2(temp##index##_warn_hyst, S_IRUGO | S_IWUSR, \
+ show_temp, store_temp, TEMP_WARN_HYST, index - 1), \
+ SENSOR_ATTR_2(temp##index##_alarm, S_IRUGO, \
+ show_alarm_beep, NULL, ALARM_STATUS, index + 11), \
+ SENSOR_ATTR_2(temp##index##_beep, S_IWUSR | S_IRUGO, \
+ show_alarm_beep, store_beep, BEEP_ENABLE, index + 11), \
+ SENSOR_ATTR_2(temp##index##_auto_channels_pwm, \
+ S_IRUGO | S_IWUSR, show_sf_ctrl, store_sf_ctrl, \
+ TEMP_FAN_MAP, index - 1), \
+ SENSOR_ATTR_2(temp##index##_pwm_enable, S_IWUSR | S_IRUGO, \
+ show_sf_ctrl, store_sf_ctrl, TEMP_PWM_ENABLE, \
+ index - 1), \
+ SENSOR_ATTR_2(thermal_cruise##index, S_IRUGO | S_IWUSR, \
+ show_sf_ctrl, store_sf_ctrl, TEMP_CRUISE, index - 1), \
+ SENSOR_ATTR_2(tolerance##index, S_IRUGO | S_IWUSR, show_sf_ctrl,\
+ store_sf_ctrl, TEMP_TOLERANCE, index - 1), \
+ SENSOR_ATTR_2(temp##index##_auto_point1_pwm, S_IRUGO | S_IWUSR, \
+ show_sf2_pwm, store_sf2_pwm, 0, index - 1), \
+ SENSOR_ATTR_2(temp##index##_auto_point2_pwm, S_IRUGO | S_IWUSR, \
+ show_sf2_pwm, store_sf2_pwm, 1, index - 1), \
+ SENSOR_ATTR_2(temp##index##_auto_point3_pwm, S_IRUGO | S_IWUSR, \
+ show_sf2_pwm, store_sf2_pwm, 2, index - 1), \
+ SENSOR_ATTR_2(temp##index##_auto_point4_pwm, S_IRUGO | S_IWUSR, \
+ show_sf2_pwm, store_sf2_pwm, 3, index - 1), \
+ SENSOR_ATTR_2(temp##index##_auto_point5_pwm, S_IRUGO | S_IWUSR, \
+ show_sf2_pwm, store_sf2_pwm, 4, index - 1), \
+ SENSOR_ATTR_2(temp##index##_auto_point6_pwm, S_IRUGO | S_IWUSR, \
+ show_sf2_pwm, store_sf2_pwm, 5, index - 1), \
+ SENSOR_ATTR_2(temp##index##_auto_point7_pwm, S_IRUGO | S_IWUSR, \
+ show_sf2_pwm, store_sf2_pwm, 6, index - 1), \
+ SENSOR_ATTR_2(temp##index##_auto_point1_temp, S_IRUGO | S_IWUSR,\
+ show_sf2_temp, store_sf2_temp, 0, index - 1), \
+ SENSOR_ATTR_2(temp##index##_auto_point2_temp, S_IRUGO | S_IWUSR,\
+ show_sf2_temp, store_sf2_temp, 1, index - 1), \
+ SENSOR_ATTR_2(temp##index##_auto_point3_temp, S_IRUGO | S_IWUSR,\
+ show_sf2_temp, store_sf2_temp, 2, index - 1), \
+ SENSOR_ATTR_2(temp##index##_auto_point4_temp, S_IRUGO | S_IWUSR,\
+ show_sf2_temp, store_sf2_temp, 3, index - 1), \
+ SENSOR_ATTR_2(temp##index##_auto_point5_temp, S_IRUGO | S_IWUSR,\
+ show_sf2_temp, store_sf2_temp, 4, index - 1), \
+ SENSOR_ATTR_2(temp##index##_auto_point6_temp, S_IRUGO | S_IWUSR,\
+ show_sf2_temp, store_sf2_temp, 5, index - 1), \
+ SENSOR_ATTR_2(temp##index##_auto_point7_temp, S_IRUGO | S_IWUSR,\
+ show_sf2_temp, store_sf2_temp, 6, index - 1)
+
+static struct sensor_device_attribute_2 w83793_sensor_attr_2[] = {
+ SENSOR_ATTR_IN(0),
+ SENSOR_ATTR_IN(1),
+ SENSOR_ATTR_IN(2),
+ SENSOR_ATTR_IN(3),
+ SENSOR_ATTR_IN(4),
+ SENSOR_ATTR_IN(5),
+ SENSOR_ATTR_IN(6),
+ SENSOR_ATTR_IN(7),
+ SENSOR_ATTR_IN(8),
+ SENSOR_ATTR_IN(9),
+ SENSOR_ATTR_TEMP(1),
+ SENSOR_ATTR_TEMP(2),
+ SENSOR_ATTR_TEMP(3),
+ SENSOR_ATTR_TEMP(4),
+ SENSOR_ATTR_TEMP(5),
+ SENSOR_ATTR_TEMP(6),
+ SENSOR_ATTR_FAN(1),
+ SENSOR_ATTR_FAN(2),
+ SENSOR_ATTR_FAN(3),
+ SENSOR_ATTR_FAN(4),
+ SENSOR_ATTR_FAN(5),
+ SENSOR_ATTR_PWM(1),
+ SENSOR_ATTR_PWM(2),
+ SENSOR_ATTR_PWM(3),
+};
+
+/* Fan6-Fan12 */
+static struct sensor_device_attribute_2 w83793_left_fan[] = {
+ SENSOR_ATTR_FAN(6),
+ SENSOR_ATTR_FAN(7),
+ SENSOR_ATTR_FAN(8),
+ SENSOR_ATTR_FAN(9),
+ SENSOR_ATTR_FAN(10),
+ SENSOR_ATTR_FAN(11),
+ SENSOR_ATTR_FAN(12),
+};
+
+/* Pwm4-Pwm8 */
+static struct sensor_device_attribute_2 w83793_left_pwm[] = {
+ SENSOR_ATTR_PWM(4),
+ SENSOR_ATTR_PWM(5),
+ SENSOR_ATTR_PWM(6),
+ SENSOR_ATTR_PWM(7),
+ SENSOR_ATTR_PWM(8),
+};
+
+static struct sensor_device_attribute_2 sda_single_files[] = {
+ SENSOR_ATTR_2(cpu0_vid, S_IRUGO, show_vid, NULL, NOT_USED, 0),
+ SENSOR_ATTR_2(cpu1_vid, S_IRUGO, show_vid, NULL, NOT_USED, 1),
+ SENSOR_ATTR_2(vrm, S_IWUSR | S_IRUGO, show_vrm, store_vrm,
+ NOT_USED, NOT_USED),
+ SENSOR_ATTR_2(chassis, S_IWUSR | S_IRUGO, show_alarm_beep,
+ store_chassis_clear, ALARM_STATUS, 30),
+ SENSOR_ATTR_2(beep_enable, S_IWUSR | S_IRUGO, show_beep_enable,
+ store_beep_enable, NOT_USED, NOT_USED),
+ SENSOR_ATTR_2(pwm_default, S_IWUSR | S_IRUGO, show_sf_setup,
+ store_sf_setup, SETUP_PWM_DEFAULT, NOT_USED),
+ SENSOR_ATTR_2(pwm_uptime, S_IWUSR | S_IRUGO, show_sf_setup,
+ store_sf_setup, SETUP_PWM_UPTIME, NOT_USED),
+ SENSOR_ATTR_2(pwm_downtime, S_IWUSR | S_IRUGO, show_sf_setup,
+ store_sf_setup, SETUP_PWM_DOWNTIME, NOT_USED),
+ SENSOR_ATTR_2(temp_critical, S_IWUSR | S_IRUGO, show_sf_setup,
+ store_sf_setup, SETUP_TEMP_CRITICAL, NOT_USED),
+};
+
+static void w83793_init_client(struct i2c_client *client)
+{
+ if (reset) {
+ w83793_write_value(client, W83793_REG_CONFIG, 0x80);
+ }
+
+ /* Start monitoring */
+ w83793_write_value(client, W83793_REG_CONFIG,
+ w83793_read_value(client, W83793_REG_CONFIG) | 0x01);
+
+}
+
+static int w83793_attach_adapter(struct i2c_adapter *adapter)
+{
+ if (!(adapter->class & I2C_CLASS_HWMON))
+ return 0;
+ return i2c_probe(adapter, &addr_data, w83793_detect);
+}
+
+static int w83793_detach_client(struct i2c_client *client)
+{
+ struct w83793_data *data = i2c_get_clientdata(client);
+ struct device *dev = &client->dev;
+ int err, i;
+
+ /* main client */
+ if (data) {
+ hwmon_device_unregister(data->class_dev);
+
+ for (i = 0; i < ARRAY_SIZE(w83793_sensor_attr_2); i++)
+ device_remove_file(dev,
+ &w83793_sensor_attr_2[i].dev_attr);
+
+ for (i = 0; i < ARRAY_SIZE(sda_single_files); i++)
+ device_remove_file(dev, &sda_single_files[i].dev_attr);
+
+ for (i = 0; i < ARRAY_SIZE(w83793_left_fan); i++)
+ device_remove_file(dev, &w83793_left_fan[i].dev_attr);
+
+ for (i = 0; i < ARRAY_SIZE(w83793_left_pwm); i++)
+ device_remove_file(dev, &w83793_left_pwm[i].dev_attr);
+ }
+
+ if ((err = i2c_detach_client(client)))
+ return err;
+
+ /* main client */
+ if (data)
+ kfree(data);
+ /* subclient */
+ else
+ kfree(client);
+
+ return 0;
+}
+
+static int
+w83793_create_subclient(struct i2c_adapter *adapter,
+ struct i2c_client *client, int addr,
+ struct i2c_client **sub_cli)
+{
+ int err = 0;
+ struct i2c_client *sub_client;
+
+ (*sub_cli) = sub_client =
+ kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
+ if (!(sub_client)) {
+ return -ENOMEM;
+ }
+ sub_client->addr = 0x48 + addr;
+ i2c_set_clientdata(sub_client, NULL);
+ sub_client->adapter = adapter;
+ sub_client->driver = &w83793_driver;
+ strlcpy(sub_client->name, "w83793 subclient", I2C_NAME_SIZE);
+ if ((err = i2c_attach_client(sub_client))) {
+ dev_err(&client->dev, "subclient registration "
+ "at address 0x%x failed\n", sub_client->addr);
+ kfree(sub_client);
+ }
+ return err;
+}
+
+static int
+w83793_detect_subclients(struct i2c_adapter *adapter, int address,
+ int kind, struct i2c_client *client)
+{
+ int i, id, err;
+ u8 tmp;
+ struct w83793_data *data = i2c_get_clientdata(client);
+
+ id = i2c_adapter_id(adapter);
+ if (force_subclients[0] == id && force_subclients[1] == address) {
+ for (i = 2; i <= 3; i++) {
+ if (force_subclients[i] < 0x48
+ || force_subclients[i] > 0x4f) {
+ dev_err(&client->dev,
+ "invalid subclient "
+ "address %d; must be 0x48-0x4f\n",
+ force_subclients[i]);
+ err = -EINVAL;
+ goto ERROR_SC_0;
+ }
+ }
+ w83793_write_value(client, W83793_REG_I2C_SUBADDR,
+ (force_subclients[2] & 0x07) |
+ ((force_subclients[3] & 0x07) << 4));
+ }
+
+ tmp = w83793_read_value(client, W83793_REG_I2C_SUBADDR);
+ if (!(tmp & 0x08)) {
+ err =
+ w83793_create_subclient(adapter, client, tmp & 0x7,
+ &data->lm75[0]);
+ if (err < 0)
+ goto ERROR_SC_0;
+ }
+ if (!(tmp & 0x80)) {
+ if ((data->lm75[0] != NULL)
+ && ((tmp & 0x7) == ((tmp >> 4) & 0x7))) {
+ dev_err(&client->dev,
+ "duplicate addresses 0x%x, "
+ "use force_subclients\n", data->lm75[0]->addr);
+ err = -ENODEV;
+ goto ERROR_SC_1;
+ }
+ err = w83793_create_subclient(adapter, client,
+ (tmp >> 4) & 0x7, &data->lm75[1]);
+ if (err < 0)
+ goto ERROR_SC_1;
+ }
+
+ return 0;
+
+ /* Undo inits in case of errors */
+
+ERROR_SC_1:
+ if (data->lm75[0] != NULL) {
+ i2c_detach_client(data->lm75[0]);
+ kfree(data->lm75[0]);
+ }
+ERROR_SC_0:
+ return err;
+}
+
+static int w83793_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+ int i;
+ u8 tmp, val;
+ struct i2c_client *client;
+ struct device *dev;
+ struct w83793_data *data;
+ int files_fan = ARRAY_SIZE(w83793_left_fan) / 7;
+ int files_pwm = ARRAY_SIZE(w83793_left_pwm) / 5;
+ int err = 0;
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
+ goto exit;
+ }
+
+ /* OK. For now, we presume we have a valid client. We now create the
+ client structure, even though we cannot fill it completely yet.
+ But it allows us to access w83793_{read,write}_value. */
+
+ if (!(data = kzalloc(sizeof(struct w83793_data), GFP_KERNEL))) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ client = &data->client;
+ dev = &client->dev;
+ i2c_set_clientdata(client, data);
+ client->addr = address;
+ client->adapter = adapter;
+ client->driver = &w83793_driver;
+
+ data->bank = i2c_smbus_read_byte_data(client, W83793_REG_BANKSEL);
+
+ /* Now, we do the remaining detection. */
+ if (kind < 0) {
+ tmp = data->bank & 0x80 ? 0x5c : 0xa3;
+ /* Check Winbond vendor ID */
+ if (tmp != i2c_smbus_read_byte_data(client,
+ W83793_REG_VENDORID)) {
+ pr_debug("w83793: Detection failed at check "
+ "vendor id\n");
+ err = -ENODEV;
+ goto free_mem;
+ }
+
+ /* If Winbond chip, address of chip and W83793_REG_I2C_ADDR
+ should match */
+ if ((data->bank & 0x07) == 0
+ && i2c_smbus_read_byte_data(client, W83793_REG_I2C_ADDR) !=
+ (address << 1)) {
+ pr_debug("w83793: Detection failed at check "
+ "i2c addr\n");
+ err = -ENODEV;
+ goto free_mem;
+ }
+
+ }
+
+ /* We have either had a force parameter, or we have already detected the
+ Winbond. Determine the chip type now */
+
+ if (kind <= 0) {
+ if (0x7b == w83793_read_value(client, W83793_REG_CHIPID)) {
+ kind = w83793;
+ } else {
+ if (kind == 0)
+ dev_warn(&adapter->dev, "w83793: Ignoring "
+ "'force' parameter for unknown chip "
+ "at address 0x%02x\n", address);
+ err = -ENODEV;
+ goto free_mem;
+ }
+ }
+
+ /* Fill in the remaining client fields and put into the global list */
+ strlcpy(client->name, "w83793", I2C_NAME_SIZE);
+
+ mutex_init(&data->update_lock);
+
+ /* Tell the I2C layer a new client has arrived */
+ if ((err = i2c_attach_client(client)))
+ goto free_mem;
+
+ if ((err = w83793_detect_subclients(adapter, address, kind, client)))
+ goto detach_client;
+
+ /* Initialize the chip */
+ w83793_init_client(client);
+
+ data->vrm = vid_which_vrm();
+ /*
+ Only fan 1-5 has their own input pins,
+ Pwm 1-3 has their own pins
+ */
+ data->has_fan = 0x1f;
+ data->has_pwm = 0x07;
+ tmp = w83793_read_value(client, W83793_REG_MFC);
+ val = w83793_read_value(client, W83793_REG_FANIN_CTRL);
+
+ /* check the function of pins 49-56 */
+ if (!(tmp & 0x80)) {
+ data->has_pwm |= 0x18; /* pwm 4,5 */
+ if (val & 0x01) { /* fan 6 */
+ data->has_fan |= 0x20;
+ data->has_pwm |= 0x20;
+ }
+ if (val & 0x02) { /* fan 7 */
+ data->has_fan |= 0x40;
+ data->has_pwm |= 0x40;
+ }
+ if (!(tmp & 0x40) && (val & 0x04)) { /* fan 8 */
+ data->has_fan |= 0x80;
+ data->has_pwm |= 0x80;
+ }
+ }
+
+ if (0x08 == (tmp & 0x0c)) {
+ if (val & 0x08) /* fan 9 */
+ data->has_fan |= 0x100;
+ if (val & 0x10) /* fan 10 */
+ data->has_fan |= 0x200;
+ }
+
+ if (0x20 == (tmp & 0x30)) {
+ if (val & 0x20) /* fan 11 */
+ data->has_fan |= 0x400;
+ if (val & 0x40) /* fan 12 */
+ data->has_fan |= 0x800;
+ }
+
+ if ((tmp & 0x01) && (val & 0x04)) { /* fan 8, second location */
+ data->has_fan |= 0x80;
+ data->has_pwm |= 0x80;
+ }
+
+ /* Register sysfs hooks */
+ for (i = 0; i < ARRAY_SIZE(w83793_sensor_attr_2); i++) {
+ err = device_create_file(dev,
+ &w83793_sensor_attr_2[i].dev_attr);
+ if (err)
+ goto exit_remove;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(sda_single_files); i++) {
+ err = device_create_file(dev, &sda_single_files[i].dev_attr);
+ if (err)
+ goto exit_remove;
+
+ }
+
+ for (i = 5; i < 12; i++) {
+ int j;
+ if (!(data->has_fan & (1 << i)))
+ continue;
+ for (j = 0; j < files_fan; j++) {
+ err = device_create_file(dev,
+ &w83793_left_fan[(i - 5) * files_fan
+ + j].dev_attr);
+ if (err)
+ goto exit_remove;
+ }
+ }
+
+ for (i = 3; i < 8; i++) {
+ int j;
+ if (!(data->has_pwm & (1 << i)))
+ continue;
+ for (j = 0; j < files_pwm; j++) {
+ err = device_create_file(dev,
+ &w83793_left_pwm[(i - 3) * files_pwm
+ + j].dev_attr);
+ if (err)
+ goto exit_remove;
+ }
+ }
+
+ data->class_dev = hwmon_device_register(dev);
+ if (IS_ERR(data->class_dev)) {
+ err = PTR_ERR(data->class_dev);
+ goto exit_remove;
+ }
+
+ return 0;
+
+ /* Unregister sysfs hooks */
+
+exit_remove:
+ for (i = 0; i < ARRAY_SIZE(w83793_sensor_attr_2); i++)
+ device_remove_file(dev, &w83793_sensor_attr_2[i].dev_attr);
+
+ for (i = 0; i < ARRAY_SIZE(sda_single_files); i++)
+ device_remove_file(dev, &sda_single_files[i].dev_attr);
+
+ for (i = 0; i < ARRAY_SIZE(w83793_left_fan); i++)
+ device_remove_file(dev, &w83793_left_fan[i].dev_attr);
+
+ for (i = 0; i < ARRAY_SIZE(w83793_left_pwm); i++)
+ device_remove_file(dev, &w83793_left_pwm[i].dev_attr);
+
+ if (data->lm75[0] != NULL) {
+ i2c_detach_client(data->lm75[0]);
+ kfree(data->lm75[0]);
+ }
+ if (data->lm75[1] != NULL) {
+ i2c_detach_client(data->lm75[1]);
+ kfree(data->lm75[1]);
+ }
+detach_client:
+ i2c_detach_client(client);
+free_mem:
+ kfree(data);
+exit:
+ return err;
+}
+
+static void w83793_update_nonvolatile(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83793_data *data = i2c_get_clientdata(client);
+ int i, j;
+ /*
+ They are somewhat "stable" registers, and to update them everytime
+ takes so much time, it's just not worthy. Update them in a long
+ interval to avoid exception.
+ */
+ if (!(time_after(jiffies, data->last_nonvolatile + HZ * 300)
+ || !data->valid))
+ return;
+ /* update voltage limits */
+ for (i = 1; i < 3; i++) {
+ for (j = 0; j < ARRAY_SIZE(data->in); j++) {
+ data->in[j][i] =
+ w83793_read_value(client, W83793_REG_IN[j][i]);
+ }
+ data->in_low_bits[i] =
+ w83793_read_value(client, W83793_REG_IN_LOW_BITS[i]);
+ }
+
+ for (i = 0; i < ARRAY_SIZE(data->fan_min); i++) {
+ /* Update the Fan measured value and limits */
+ if (!(data->has_fan & (1 << i))) {
+ continue;
+ }
+ data->fan_min[i] =
+ w83793_read_value(client, W83793_REG_FAN_MIN(i)) << 8;
+ data->fan_min[i] |=
+ w83793_read_value(client, W83793_REG_FAN_MIN(i) + 1);
+ }
+
+ for (i = 0; i < ARRAY_SIZE(data->temp_fan_map); i++) {
+ data->temp_fan_map[i] =
+ w83793_read_value(client, W83793_REG_TEMP_FAN_MAP(i));
+ for (j = 1; j < 5; j++) {
+ data->temp[i][j] =
+ w83793_read_value(client, W83793_REG_TEMP[i][j]);
+ }
+ data->temp_cruise[i] =
+ w83793_read_value(client, W83793_REG_TEMP_CRUISE(i));
+ for (j = 0; j < 7; j++) {
+ data->sf2_pwm[i][j] =
+ w83793_read_value(client, W83793_REG_SF2_PWM(i, j));
+ data->sf2_temp[i][j] =
+ w83793_read_value(client,
+ W83793_REG_SF2_TEMP(i, j));
+ }
+ }
+
+ for (i = 0; i < ARRAY_SIZE(data->temp_mode); i++)
+ data->temp_mode[i] =
+ w83793_read_value(client, W83793_REG_TEMP_MODE[i]);
+
+ for (i = 0; i < ARRAY_SIZE(data->tolerance); i++) {
+ data->tolerance[i] =
+ w83793_read_value(client, W83793_REG_TEMP_TOL(i));
+ }
+
+ for (i = 0; i < ARRAY_SIZE(data->pwm); i++) {
+ if (!(data->has_pwm & (1 << i)))
+ continue;
+ data->pwm[i][PWM_NONSTOP] =
+ w83793_read_value(client, W83793_REG_PWM(i, PWM_NONSTOP));
+ data->pwm[i][PWM_START] =
+ w83793_read_value(client, W83793_REG_PWM(i, PWM_START));
+ data->pwm_stop_time[i] =
+ w83793_read_value(client, W83793_REG_PWM_STOP_TIME(i));
+ }
+
+ data->pwm_default = w83793_read_value(client, W83793_REG_PWM_DEFAULT);
+ data->pwm_enable = w83793_read_value(client, W83793_REG_PWM_ENABLE);
+ data->pwm_uptime = w83793_read_value(client, W83793_REG_PWM_UPTIME);
+ data->pwm_downtime = w83793_read_value(client, W83793_REG_PWM_DOWNTIME);
+ data->temp_critical =
+ w83793_read_value(client, W83793_REG_TEMP_CRITICAL);
+ data->beep_enable = w83793_read_value(client, W83793_REG_OVT_BEEP);
+
+ for (i = 0; i < ARRAY_SIZE(data->beeps); i++) {
+ data->beeps[i] = w83793_read_value(client, W83793_REG_BEEP(i));
+ }
+
+ data->last_nonvolatile = jiffies;
+}
+
+static struct w83793_data *w83793_update_device(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83793_data *data = i2c_get_clientdata(client);
+ int i;
+
+ mutex_lock(&data->update_lock);
+
+ if (!(time_after(jiffies, data->last_updated + HZ * 2)
+ || !data->valid))
+ goto END;
+
+ /* Update the voltages measured value and limits */
+ for (i = 0; i < ARRAY_SIZE(data->in); i++)
+ data->in[i][IN_READ] =
+ w83793_read_value(client, W83793_REG_IN[i][IN_READ]);
+
+ data->in_low_bits[IN_READ] =
+ w83793_read_value(client, W83793_REG_IN_LOW_BITS[IN_READ]);
+
+ for (i = 0; i < ARRAY_SIZE(data->fan); i++) {
+ if (!(data->has_fan & (1 << i))) {
+ continue;
+ }
+ data->fan[i] =
+ w83793_read_value(client, W83793_REG_FAN(i)) << 8;
+ data->fan[i] |=
+ w83793_read_value(client, W83793_REG_FAN(i) + 1);
+ }
+
+ for (i = 0; i < ARRAY_SIZE(data->temp); i++)
+ data->temp[i][TEMP_READ] =
+ w83793_read_value(client, W83793_REG_TEMP[i][TEMP_READ]);
+
+ data->temp_low_bits =
+ w83793_read_value(client, W83793_REG_TEMP_LOW_BITS);
+
+ for (i = 0; i < ARRAY_SIZE(data->pwm); i++) {
+ if (data->has_pwm & (1 << i))
+ data->pwm[i][PWM_DUTY] =
+ w83793_read_value(client,
+ W83793_REG_PWM(i, PWM_DUTY));
+ }
+
+ for (i = 0; i < ARRAY_SIZE(data->alarms); i++)
+ data->alarms[i] =
+ w83793_read_value(client, W83793_REG_ALARM(i));
+ data->vid[0] = w83793_read_value(client, W83793_REG_VID_INA);
+ data->vid[1] = w83793_read_value(client, W83793_REG_VID_INB);
+ w83793_update_nonvolatile(dev);
+ data->last_updated = jiffies;
+ data->valid = 1;
+
+END:
+ mutex_unlock(&data->update_lock);
+ return data;
+}
+
+/* Ignore the possibility that somebody change bank outside the driver
+ Must be called with data->update_lock held, except during initialization */
+static u8 w83793_read_value(struct i2c_client *client, u16 reg)
+{
+ struct w83793_data *data = i2c_get_clientdata(client);
+ u8 res = 0xff;
+ u8 new_bank = reg >> 8;
+
+ new_bank |= data->bank & 0xfc;
+ if (data->bank != new_bank) {
+ if (i2c_smbus_write_byte_data
+ (client, W83793_REG_BANKSEL, new_bank) >= 0)
+ data->bank = new_bank;
+ else {
+ dev_err(&client->dev,
+ "set bank to %d failed, fall back "
+ "to bank %d, read reg 0x%x error\n",
+ new_bank, data->bank, reg);
+ res = 0x0; /* read 0x0 from the chip */
+ goto END;
+ }
+ }
+ res = i2c_smbus_read_byte_data(client, reg & 0xff);
+END:
+ return res;
+}
+
+/* Must be called with data->update_lock held, except during initialization */
+static int w83793_write_value(struct i2c_client *client, u16 reg, u8 value)
+{
+ struct w83793_data *data = i2c_get_clientdata(client);
+ int res;
+ u8 new_bank = reg >> 8;
+
+ new_bank |= data->bank & 0xfc;
+ if (data->bank != new_bank) {
+ if ((res = i2c_smbus_write_byte_data
+ (client, W83793_REG_BANKSEL, new_bank)) >= 0)
+ data->bank = new_bank;
+ else {
+ dev_err(&client->dev,
+ "set bank to %d failed, fall back "
+ "to bank %d, write reg 0x%x error\n",
+ new_bank, data->bank, reg);
+ goto END;
+ }
+ }
+
+ res = i2c_smbus_write_byte_data(client, reg & 0xff, value);
+END:
+ return res;
+}
+
+static int __init sensors_w83793_init(void)
+{
+ return i2c_add_driver(&w83793_driver);
+}
+
+static void __exit sensors_w83793_exit(void)
+{
+ i2c_del_driver(&w83793_driver);
+}
+
+MODULE_AUTHOR("Yuan Mu");
+MODULE_DESCRIPTION("w83793 driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_w83793_init);
+module_exit(sensors_w83793_exit);
diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c
index 33fbb47..8e1e3f8 100644
--- a/drivers/i2c/busses/i2c-ali1563.c
+++ b/drivers/i2c/busses/i2c-ali1563.c
@@ -2,7 +2,7 @@
* i2c-ali1563.c - i2c driver for the ALi 1563 Southbridge
*
* Copyright (C) 2004 Patrick Mochel
- * 2005 Rudolf Marek <r.marek@sh.cvut.cz>
+ * 2005 Rudolf Marek <r.marek@assembler.cz>
*
* The 1563 southbridge is deceptively similar to the 1533, with a
* few notable exceptions. One of those happens to be the fact they
diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h
index 7ae3c332..d38778f 100644
--- a/include/linux/i2c-id.h
+++ b/include/linux/i2c-id.h
@@ -142,7 +142,6 @@
#define I2C_DRIVERID_MTP008 1023
#define I2C_DRIVERID_DS1621 1024
#define I2C_DRIVERID_ADM1024 1025
-#define I2C_DRIVERID_IT87 1026
#define I2C_DRIVERID_CH700X 1027 /* single driver for CH7003-7009 digital pc to tv encoders */
#define I2C_DRIVERID_FSCPOS 1028
#define I2C_DRIVERID_FSCSCY 1029
OpenPOWER on IntegriCloud