diff options
51 files changed, 1308 insertions, 1264 deletions
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index a57c1f2..f27cdd7 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1009,6 +1009,10 @@ and is between 256 and 4096 characters. It is defined in the file meye.*= [HW] Set MotionEye Camera parameters See Documentation/video4linux/meye.txt. + mfgpt_irq= [IA-32] Specify the IRQ to use for the + Multi-Function General Purpose Timers on AMD Geode + platforms. + mga= [HW,DRM] mousedev.tap_time= @@ -1160,6 +1164,9 @@ and is between 256 and 4096 characters. It is defined in the file nomce [X86-32] Machine Check Exception + nomfgpt [X86-32] Disable Multi-Function General Purpose + Timer usage (for AMD Geode machines). + noreplace-paravirt [X86-32,PV_OPS] Don't patch paravirt_ops noreplace-smp [X86-32,SMP] Don't replace SMP instructions diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig index 2d85e4b..6bbbc27 100644 --- a/arch/i386/Kconfig +++ b/arch/i386/Kconfig @@ -1206,6 +1206,16 @@ config SCx200HR_TIMER processor goes idle (as is done by the scheduler). The other workaround is idle=poll boot option. +config GEODE_MFGPT_TIMER + bool "Geode Multi-Function General Purpose Timer (MFGPT) events" + depends on MGEODE_LX && GENERIC_TIME && GENERIC_CLOCKEVENTS + default y + help + This driver provides a clock event source based on the MFGPT + timer(s) in the CS5535 and CS5536 companion chip for the geode. + MFGPTs have a better resolution and max interval than the + generic PIT, and are suitable for use as high-res timers. + config K8_NB def_bool y depends on AGP_AMD64 diff --git a/arch/x86/kernel/Makefile_32 b/arch/x86/kernel/Makefile_32 index c624193..7ff0206 100644 --- a/arch/x86/kernel/Makefile_32 +++ b/arch/x86/kernel/Makefile_32 @@ -7,7 +7,7 @@ extra-y := head_32.o init_task_32.o vmlinux.lds obj-y := process_32.o signal_32.o entry_32.o traps_32.o irq_32.o \ ptrace_32.o time_32.o ioport_32.o ldt_32.o setup_32.o i8259_32.o sys_i386_32.o \ pci-dma_32.o i386_ksyms_32.o i387_32.o bootflag.o e820_32.o\ - quirks.o i8237.o topology.o alternative.o i8253_32.o tsc_32.o + quirks.o i8237.o topology.o alternative.o i8253.o tsc_32.o obj-$(CONFIG_STACKTRACE) += stacktrace.o obj-y += cpu/ @@ -37,9 +37,9 @@ obj-$(CONFIG_EFI) += efi_32.o efi_stub_32.o obj-$(CONFIG_DOUBLEFAULT) += doublefault_32.o obj-$(CONFIG_VM86) += vm86_32.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o -obj-$(CONFIG_HPET_TIMER) += hpet_32.o +obj-$(CONFIG_HPET_TIMER) += hpet.o obj-$(CONFIG_K8_NB) += k8.o -obj-$(CONFIG_MGEODE_LX) += geode_32.o +obj-$(CONFIG_MGEODE_LX) += geode_32.o mfgpt_32.o obj-$(CONFIG_VMI) += vmi_32.o vmiclock_32.o obj-$(CONFIG_PARAVIRT) += paravirt_32.o diff --git a/arch/x86/kernel/Makefile_64 b/arch/x86/kernel/Makefile_64 index 3ab017a..43da662 100644 --- a/arch/x86/kernel/Makefile_64 +++ b/arch/x86/kernel/Makefile_64 @@ -8,8 +8,8 @@ obj-y := process_64.o signal_64.o entry_64.o traps_64.o irq_64.o \ ptrace_64.o time_64.o ioport_64.o ldt_64.o setup_64.o i8259_64.o sys_x86_64.o \ x8664_ksyms_64.o i387_64.o syscall_64.o vsyscall_64.o \ setup64.o bootflag.o e820_64.o reboot_64.o quirks.o i8237.o \ - pci-dma_64.o pci-nommu_64.o alternative.o hpet_64.o tsc_64.o bugs_64.o \ - perfctr-watchdog.o + pci-dma_64.o pci-nommu_64.o alternative.o hpet.o tsc_64.o bugs_64.o \ + perfctr-watchdog.o i8253.o obj-$(CONFIG_STACKTRACE) += stacktrace.o obj-$(CONFIG_X86_MCE) += mce_64.o therm_throt.o diff --git a/arch/x86/kernel/apic_64.c b/arch/x86/kernel/apic_64.c index 925758d..395928d 100644 --- a/arch/x86/kernel/apic_64.c +++ b/arch/x86/kernel/apic_64.c @@ -25,6 +25,7 @@ #include <linux/sysdev.h> #include <linux/module.h> #include <linux/ioport.h> +#include <linux/clockchips.h> #include <asm/atomic.h> #include <asm/smp.h> @@ -39,12 +40,9 @@ #include <asm/hpet.h> #include <asm/apic.h> -int apic_mapped; int apic_verbosity; -int apic_runs_main_timer; -int apic_calibrate_pmtmr __initdata; - -int disable_apic_timer __initdata; +int disable_apic_timer __cpuinitdata; +static int apic_calibrate_pmtmr __initdata; /* Local APIC timer works in C2? */ int local_apic_timer_c2_ok; @@ -56,14 +54,78 @@ static struct resource lapic_resource = { .flags = IORESOURCE_MEM | IORESOURCE_BUSY, }; +static unsigned int calibration_result; + +static int lapic_next_event(unsigned long delta, + struct clock_event_device *evt); +static void lapic_timer_setup(enum clock_event_mode mode, + struct clock_event_device *evt); + +static void lapic_timer_broadcast(cpumask_t mask); + +static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen); + +static struct clock_event_device lapic_clockevent = { + .name = "lapic", + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT + | CLOCK_EVT_FEAT_C3STOP | CLOCK_EVT_FEAT_DUMMY, + .shift = 32, + .set_mode = lapic_timer_setup, + .set_next_event = lapic_next_event, + .broadcast = lapic_timer_broadcast, + .rating = 100, + .irq = -1, +}; +static DEFINE_PER_CPU(struct clock_event_device, lapic_events); + +static int lapic_next_event(unsigned long delta, + struct clock_event_device *evt) +{ + apic_write(APIC_TMICT, delta); + return 0; +} + +static void lapic_timer_setup(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + unsigned long flags; + unsigned int v; + + /* Lapic used as dummy for broadcast ? */ + if (evt->features & CLOCK_EVT_FEAT_DUMMY) + return; + + local_irq_save(flags); + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + case CLOCK_EVT_MODE_ONESHOT: + __setup_APIC_LVTT(calibration_result, + mode != CLOCK_EVT_MODE_PERIODIC, 1); + break; + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + v = apic_read(APIC_LVTT); + v |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR); + apic_write(APIC_LVTT, v); + break; + case CLOCK_EVT_MODE_RESUME: + /* Nothing to do here */ + break; + } + + local_irq_restore(flags); +} + /* - * cpu_mask that denotes the CPUs that needs timer interrupt coming in as - * IPIs in place of local APIC timers + * Local APIC timer broadcast function */ -static cpumask_t timer_interrupt_broadcast_ipi_mask; - -/* Using APIC to generate smp_local_timer_interrupt? */ -int using_apic_timer __read_mostly = 0; +static void lapic_timer_broadcast(cpumask_t mask) +{ +#ifdef CONFIG_SMP + send_IPI_mask(mask, LOCAL_TIMER_VECTOR); +#endif +} static void apic_pm_activate(void); @@ -184,7 +246,10 @@ void disconnect_bsp_APIC(int virt_wire_setup) apic_write(APIC_SPIV, value); if (!virt_wire_setup) { - /* For LVT0 make it edge triggered, active high, external and enabled */ + /* + * For LVT0 make it edge triggered, active high, + * external and enabled + */ value = apic_read(APIC_LVT0); value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING | APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | @@ -420,10 +485,12 @@ void __cpuinit setup_local_APIC (void) value = apic_read(APIC_LVT0) & APIC_LVT_MASKED; if (!smp_processor_id() && !value) { value = APIC_DM_EXTINT; - apic_printk(APIC_VERBOSE, "enabled ExtINT on CPU#%d\n", smp_processor_id()); + apic_printk(APIC_VERBOSE, "enabled ExtINT on CPU#%d\n", + smp_processor_id()); } else { value = APIC_DM_EXTINT | APIC_LVT_MASKED; - apic_printk(APIC_VERBOSE, "masked ExtINT on CPU#%d\n", smp_processor_id()); + apic_printk(APIC_VERBOSE, "masked ExtINT on CPU#%d\n", + smp_processor_id()); } apic_write(APIC_LVT0, value); @@ -706,8 +773,8 @@ void __init init_apic_mappings(void) apic_phys = mp_lapic_addr; set_fixmap_nocache(FIX_APIC_BASE, apic_phys); - apic_mapped = 1; - apic_printk(APIC_VERBOSE,"mapped APIC to %16lx (%16lx)\n", APIC_BASE, apic_phys); + apic_printk(APIC_VERBOSE, "mapped APIC to %16lx (%16lx)\n", + APIC_BASE, apic_phys); /* Put local APIC into the resource map. */ lapic_resource.start = apic_phys; @@ -730,12 +797,14 @@ void __init init_apic_mappings(void) if (smp_found_config) { ioapic_phys = mp_ioapics[i].mpc_apicaddr; } else { - ioapic_phys = (unsigned long) alloc_bootmem_pages(PAGE_SIZE); + ioapic_phys = (unsigned long) + alloc_bootmem_pages(PAGE_SIZE); ioapic_phys = __pa(ioapic_phys); } set_fixmap_nocache(idx, ioapic_phys); - apic_printk(APIC_VERBOSE,"mapped IOAPIC to %016lx (%016lx)\n", - __fix_to_virt(idx), ioapic_phys); + apic_printk(APIC_VERBOSE, + "mapped IOAPIC to %016lx (%016lx)\n", + __fix_to_virt(idx), ioapic_phys); idx++; if (ioapic_res != NULL) { @@ -758,16 +827,14 @@ void __init init_apic_mappings(void) * P5 APIC double write bug. */ -#define APIC_DIVISOR 16 - -static void __setup_APIC_LVTT(unsigned int clocks) +static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen) { unsigned int lvtt_value, tmp_value; - int cpu = smp_processor_id(); - lvtt_value = APIC_LVT_TIMER_PERIODIC | LOCAL_TIMER_VECTOR; - - if (cpu_isset(cpu, timer_interrupt_broadcast_ipi_mask)) + lvtt_value = LOCAL_TIMER_VECTOR; + if (!oneshot) + lvtt_value |= APIC_LVT_TIMER_PERIODIC; + if (!irqen) lvtt_value |= APIC_LVT_MASKED; apic_write(APIC_LVTT, lvtt_value); @@ -780,44 +847,18 @@ static void __setup_APIC_LVTT(unsigned int clocks) & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE)) | APIC_TDR_DIV_16); - apic_write(APIC_TMICT, clocks/APIC_DIVISOR); + if (!oneshot) + apic_write(APIC_TMICT, clocks); } -static void setup_APIC_timer(unsigned int clocks) +static void setup_APIC_timer(void) { - unsigned long flags; + struct clock_event_device *levt = &__get_cpu_var(lapic_events); - local_irq_save(flags); + memcpy(levt, &lapic_clockevent, sizeof(*levt)); + levt->cpumask = cpumask_of_cpu(smp_processor_id()); - /* wait for irq slice */ - if (hpet_address && hpet_use_timer) { - u32 trigger = hpet_readl(HPET_T0_CMP); - while (hpet_readl(HPET_T0_CMP) == trigger) - /* do nothing */ ; - } else { - int c1, c2; - outb_p(0x00, 0x43); - c2 = inb_p(0x40); - c2 |= inb_p(0x40) << 8; - do { - c1 = c2; - outb_p(0x00, 0x43); - c2 = inb_p(0x40); - c2 |= inb_p(0x40) << 8; - } while (c2 - c1 < 300); - } - __setup_APIC_LVTT(clocks); - /* Turn off PIT interrupt if we use APIC timer as main timer. - Only works with the PM timer right now - TBD fix it for HPET too. */ - if ((pmtmr_ioport != 0) && - smp_processor_id() == boot_cpu_id && - apic_runs_main_timer == 1 && - !cpu_isset(boot_cpu_id, timer_interrupt_broadcast_ipi_mask)) { - stop_timer_interrupt(); - apic_runs_main_timer++; - } - local_irq_restore(flags); + clockevents_register_device(levt); } /* @@ -835,17 +876,22 @@ static void setup_APIC_timer(unsigned int clocks) #define TICK_COUNT 100000000 -static int __init calibrate_APIC_clock(void) +static void __init calibrate_APIC_clock(void) { unsigned apic, apic_start; unsigned long tsc, tsc_start; int result; + + local_irq_disable(); + /* * Put whatever arbitrary (but long enough) timeout * value into the APIC clock, we just want to get the * counter running for calibration. + * + * No interrupt enable ! */ - __setup_APIC_LVTT(4000000000); + __setup_APIC_LVTT(250000000, 0, 0); apic_start = apic_read(APIC_TMCCT); #ifdef CONFIG_X86_PM_TIMER @@ -867,123 +913,62 @@ static int __init calibrate_APIC_clock(void) result = (apic_start - apic) * 1000L * tsc_khz / (tsc - tsc_start); } - printk("result %d\n", result); + local_irq_enable(); + + printk(KERN_DEBUG "APIC timer calibration result %d\n", result); printk(KERN_INFO "Detected %d.%03d MHz APIC timer.\n", result / 1000 / 1000, result / 1000 % 1000); - return result * APIC_DIVISOR / HZ; -} + /* Calculate the scaled math multiplication factor */ + lapic_clockevent.mult = div_sc(result, NSEC_PER_SEC, 32); + lapic_clockevent.max_delta_ns = + clockevent_delta2ns(0x7FFFFF, &lapic_clockevent); + lapic_clockevent.min_delta_ns = + clockevent_delta2ns(0xF, &lapic_clockevent); -static unsigned int calibration_result; + calibration_result = result / HZ; +} void __init setup_boot_APIC_clock (void) { + /* + * The local apic timer can be disabled via the kernel commandline. + * Register the lapic timer as a dummy clock event source on SMP + * systems, so the broadcast mechanism is used. On UP systems simply + * ignore it. + */ if (disable_apic_timer) { printk(KERN_INFO "Disabling APIC timer\n"); + /* No broadcast on UP ! */ + if (num_possible_cpus() > 1) + setup_APIC_timer(); return; } printk(KERN_INFO "Using local APIC timer interrupts.\n"); - using_apic_timer = 1; - - local_irq_disable(); + calibrate_APIC_clock(); - calibration_result = calibrate_APIC_clock(); /* - * Now set up the timer for real. + * If nmi_watchdog is set to IO_APIC, we need the + * PIT/HPET going. Otherwise register lapic as a dummy + * device. */ - setup_APIC_timer(calibration_result); + if (nmi_watchdog != NMI_IO_APIC) + lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY; + else + printk(KERN_WARNING "APIC timer registered as dummy," + " due to nmi_watchdog=1!\n"); - local_irq_enable(); + setup_APIC_timer(); } void __cpuinit setup_secondary_APIC_clock(void) { - local_irq_disable(); /* FIXME: Do we need this? --RR */ - setup_APIC_timer(calibration_result); - local_irq_enable(); + setup_APIC_timer(); } -void disable_APIC_timer(void) -{ - if (using_apic_timer) { - unsigned long v; - - v = apic_read(APIC_LVTT); - /* - * When an illegal vector value (0-15) is written to an LVT - * entry and delivery mode is Fixed, the APIC may signal an - * illegal vector error, with out regard to whether the mask - * bit is set or whether an interrupt is actually seen on input. - * - * Boot sequence might call this function when the LVTT has - * '0' vector value. So make sure vector field is set to - * valid value. - */ - v |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR); - apic_write(APIC_LVTT, v); - } -} - -void enable_APIC_timer(void) -{ - int cpu = smp_processor_id(); - - if (using_apic_timer && - !cpu_isset(cpu, timer_interrupt_broadcast_ipi_mask)) { - unsigned long v; - - v = apic_read(APIC_LVTT); - apic_write(APIC_LVTT, v & ~APIC_LVT_MASKED); - } -} - -void switch_APIC_timer_to_ipi(void *cpumask) -{ - cpumask_t mask = *(cpumask_t *)cpumask; - int cpu = smp_processor_id(); - - if (cpu_isset(cpu, mask) && - !cpu_isset(cpu, timer_interrupt_broadcast_ipi_mask)) { - disable_APIC_timer(); - cpu_set(cpu, timer_interrupt_broadcast_ipi_mask); - } -} -EXPORT_SYMBOL(switch_APIC_timer_to_ipi); - -void smp_send_timer_broadcast_ipi(void) -{ - int cpu = smp_processor_id(); - cpumask_t mask; - - cpus_and(mask, cpu_online_map, timer_interrupt_broadcast_ipi_mask); - - if (cpu_isset(cpu, mask)) { - cpu_clear(cpu, mask); - add_pda(apic_timer_irqs, 1); - smp_local_timer_interrupt(); - } - - if (!cpus_empty(mask)) { - send_IPI_mask(mask, LOCAL_TIMER_VECTOR); - } -} - -void switch_ipi_to_APIC_timer(void *cpumask) -{ - cpumask_t mask = *(cpumask_t *)cpumask; - int cpu = smp_processor_id(); - - if (cpu_isset(cpu, mask) && - cpu_isset(cpu, timer_interrupt_broadcast_ipi_mask)) { - cpu_clear(cpu, timer_interrupt_broadcast_ipi_mask); - enable_APIC_timer(); - } -} -EXPORT_SYMBOL(switch_ipi_to_APIC_timer); - int setup_profiling_timer(unsigned int multiplier) { return -EINVAL; @@ -997,8 +982,6 @@ void setup_APIC_extended_lvt(unsigned char lvt_off, unsigned char vector, apic_write(reg, v); } -#undef APIC_DIVISOR - /* * Local timer interrupt handler. It does both profiling and * process statistics/rescheduling. @@ -1011,22 +994,34 @@ void setup_APIC_extended_lvt(unsigned char lvt_off, unsigned char vector, void smp_local_timer_interrupt(void) { - profile_tick(CPU_PROFILING); -#ifdef CONFIG_SMP - update_process_times(user_mode(get_irq_regs())); -#endif - if (apic_runs_main_timer > 1 && smp_processor_id() == boot_cpu_id) - main_timer_handler(); + int cpu = smp_processor_id(); + struct clock_event_device *evt = &per_cpu(lapic_events, cpu); + /* - * We take the 'long' return path, and there every subsystem - * grabs the appropriate locks (kernel lock/ irq lock). + * Normally we should not be here till LAPIC has been initialized but + * in some cases like kdump, its possible that there is a pending LAPIC + * timer interrupt from previous kernel's context and is delivered in + * new kernel the moment interrupts are enabled. * - * We might want to decouple profiling from the 'long path', - * and do the profiling totally in assembly. - * - * Currently this isn't too much of an issue (performance wise), - * we can take more than 100K local irqs per second on a 100 MHz P5. + * Interrupts are enabled early and LAPIC is setup much later, hence + * its possible that when we get here evt->event_handler is NULL. + * Check for event_handler being NULL and discard the interrupt as + * spurious. + */ + if (!evt->event_handler) { + printk(KERN_WARNING + "Spurious LAPIC timer interrupt on cpu %d\n", cpu); + /* Switch it off */ + lapic_timer_setup(CLOCK_EVT_MODE_SHUTDOWN, evt); + return; + } + + /* + * the NMI deadlock-detector uses this. */ + add_pda(apic_timer_irqs, 1); + + evt->event_handler(evt); } /* @@ -1042,11 +1037,6 @@ void smp_apic_timer_interrupt(struct pt_regs *regs) struct pt_regs *old_regs = set_irq_regs(regs); /* - * the NMI deadlock-detector uses this. - */ - add_pda(apic_timer_irqs, 1); - - /* * NOTE! We'd better ACK the irq immediately, * because timer handling can be slow. */ @@ -1225,29 +1215,13 @@ static __init int setup_noapictimer(char *str) disable_apic_timer = 1; return 1; } - -static __init int setup_apicmaintimer(char *str) -{ - apic_runs_main_timer = 1; - nohpet = 1; - return 1; -} -__setup("apicmaintimer", setup_apicmaintimer); - -static __init int setup_noapicmaintimer(char *str) -{ - apic_runs_main_timer = -1; - return 1; -} -__setup("noapicmaintimer", setup_noapicmaintimer); +__setup("noapictimer", setup_noapictimer); static __init int setup_apicpmtimer(char *s) { apic_calibrate_pmtmr = 1; notsc_setup(NULL); - return setup_apicmaintimer(NULL); + return 0; } __setup("apicpmtimer", setup_apicpmtimer); -__setup("noapictimer", setup_noapictimer); - diff --git a/arch/x86/kernel/geode_32.c b/arch/x86/kernel/geode_32.c index 41e8aec..f12d8c5 100644 --- a/arch/x86/kernel/geode_32.c +++ b/arch/x86/kernel/geode_32.c @@ -145,10 +145,14 @@ EXPORT_SYMBOL_GPL(geode_gpio_setup_event); static int __init geode_southbridge_init(void) { + int timers; + if (!is_geode()) return -ENODEV; init_lbars(); + timers = geode_mfgpt_detect(); + printk(KERN_INFO "geode: %d MFGPT timers available.\n", timers); return 0; } diff --git a/arch/x86/kernel/hpet_32.c b/arch/x86/kernel/hpet.c index 533d493..f836707 100644 --- a/arch/x86/kernel/hpet_32.c +++ b/arch/x86/kernel/hpet.c @@ -1,5 +1,6 @@ #include <linux/clocksource.h> #include <linux/clockchips.h> +#include <linux/delay.h> #include <linux/errno.h> #include <linux/hpet.h> #include <linux/init.h> @@ -7,11 +8,11 @@ #include <linux/pm.h> #include <linux/delay.h> +#include <asm/fixmap.h> #include <asm/hpet.h> +#include <asm/i8253.h> #include <asm/io.h> -extern struct clock_event_device *global_clock_event; - #define HPET_MASK CLOCKSOURCE_MASK(32) #define HPET_SHIFT 22 @@ -22,9 +23,9 @@ extern struct clock_event_device *global_clock_event; * HPET address is set in acpi/boot.c, when an ACPI entry exists */ unsigned long hpet_address; -static void __iomem * hpet_virt_address; +static void __iomem *hpet_virt_address; -static inline unsigned long hpet_readl(unsigned long a) +unsigned long hpet_readl(unsigned long a) { return readl(hpet_virt_address + a); } @@ -34,6 +35,36 @@ static inline void hpet_writel(unsigned long d, unsigned long a) writel(d, hpet_virt_address + a); } +#ifdef CONFIG_X86_64 + +#include <asm/pgtable.h> + +static inline void hpet_set_mapping(void) +{ + set_fixmap_nocache(FIX_HPET_BASE, hpet_address); + __set_fixmap(VSYSCALL_HPET, hpet_address, PAGE_KERNEL_VSYSCALL_NOCACHE); + hpet_virt_address = (void __iomem *)fix_to_virt(FIX_HPET_BASE); +} + +static inline void hpet_clear_mapping(void) +{ + hpet_virt_address = NULL; +} + +#else + +static inline void hpet_set_mapping(void) +{ + hpet_virt_address = ioremap_nocache(hpet_address, HPET_MMAP_SIZE); +} + +static inline void hpet_clear_mapping(void) +{ + iounmap(hpet_virt_address); + hpet_virt_address = NULL; +} +#endif + /* * HPET command line enable / disable */ @@ -49,6 +80,13 @@ static int __init hpet_setup(char* str) } __setup("hpet=", hpet_setup); +static int __init disable_hpet(char *str) +{ + boot_hpet_disable = 1; + return 1; +} +__setup("nohpet", disable_hpet); + static inline int is_hpet_capable(void) { return (!boot_hpet_disable && hpet_address); @@ -83,7 +121,7 @@ static void hpet_reserve_platform_timers(unsigned long id) memset(&hd, 0, sizeof (hd)); hd.hd_phys_address = hpet_address; - hd.hd_address = hpet_virt_address; + hd.hd_address = hpet; hd.hd_nirqs = nrtimers; hd.hd_flags = HPET_DATA_PLATFORM; hpet_reserve_timer(&hd, 0); @@ -111,9 +149,9 @@ static void hpet_reserve_platform_timers(unsigned long id) { } */ static unsigned long hpet_period; -static void hpet_set_mode(enum clock_event_mode mode, +static void hpet_legacy_set_mode(enum clock_event_mode mode, struct clock_event_device *evt); -static int hpet_next_event(unsigned long delta, +static int hpet_legacy_next_event(unsigned long delta, struct clock_event_device *evt); /* @@ -122,10 +160,11 @@ static int hpet_next_event(unsigned long delta, static struct clock_event_device hpet_clockevent = { .name = "hpet", .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .set_mode = hpet_set_mode, - .set_next_event = hpet_next_event, + .set_mode = hpet_legacy_set_mode, + .set_next_event = hpet_legacy_next_event, .shift = 32, .irq = 0, + .rating = 50, }; static void hpet_start_counter(void) @@ -140,7 +179,18 @@ static void hpet_start_counter(void) hpet_writel(cfg, HPET_CFG); } -static void hpet_enable_int(void) +static void hpet_resume_device(void) +{ + force_hpet_resume(); +} + +static void hpet_restart_counter(void) +{ + hpet_resume_device(); + hpet_start_counter(); +} + +static void hpet_enable_legacy_int(void) { unsigned long cfg = hpet_readl(HPET_CFG); @@ -149,7 +199,39 @@ static void hpet_enable_int(void) hpet_legacy_int_enabled = 1; } -static void hpet_set_mode(enum clock_event_mode mode, +static void hpet_legacy_clockevent_register(void) +{ + uint64_t hpet_freq; + + /* Start HPET legacy interrupts */ + hpet_enable_legacy_int(); + + /* + * The period is a femto seconds value. We need to calculate the + * scaled math multiplication factor for nanosecond to hpet tick + * conversion. + */ + hpet_freq = 1000000000000000ULL; + do_div(hpet_freq, hpet_period); + hpet_clockevent.mult = div_sc((unsigned long) hpet_freq, + NSEC_PER_SEC, 32); + /* Calculate the min / max delta */ + hpet_clockevent.max_delta_ns = clockevent_delta2ns(0x7FFFFFFF, + &hpet_clockevent); + hpet_clockevent.min_delta_ns = clockevent_delta2ns(0x30, + &hpet_clockevent); + + /* + * Start hpet with the boot cpu mask and make it + * global after the IO_APIC has been initialized. + */ + hpet_clockevent.cpumask = cpumask_of_cpu(smp_processor_id()); + clockevents_register_device(&hpet_clockevent); + global_clock_event = &hpet_clockevent; + printk(KERN_DEBUG "hpet clockevent registered\n"); +} + +static void hpet_legacy_set_mode(enum clock_event_mode mode, struct clock_event_device *evt) { unsigned long cfg, cmp, now; @@ -190,12 +272,12 @@ static void hpet_set_mode(enum clock_event_mode mode, break; case CLOCK_EVT_MODE_RESUME: - hpet_enable_int(); + hpet_enable_legacy_int(); break; } } -static int hpet_next_event(unsigned long delta, +static int hpet_legacy_next_event(unsigned long delta, struct clock_event_device *evt) { unsigned long cnt; @@ -215,6 +297,13 @@ static cycle_t read_hpet(void) return (cycle_t)hpet_readl(HPET_COUNTER); } +#ifdef CONFIG_X86_64 +static cycle_t __vsyscall_fn vread_hpet(void) +{ + return readl((const void __iomem *)fix_to_virt(VSYSCALL_HPET) + 0xf0); +} +#endif + static struct clocksource clocksource_hpet = { .name = "hpet", .rating = 250, @@ -222,61 +311,17 @@ static struct clocksource clocksource_hpet = { .mask = HPET_MASK, .shift = HPET_SHIFT, .flags = CLOCK_SOURCE_IS_CONTINUOUS, - .resume = hpet_start_counter, + .resume = hpet_restart_counter, +#ifdef CONFIG_X86_64 + .vread = vread_hpet, +#endif }; -/* - * Try to setup the HPET timer - */ -int __init hpet_enable(void) +static int hpet_clocksource_register(void) { - unsigned long id; - uint64_t hpet_freq; u64 tmp, start, now; cycle_t t1; - if (!is_hpet_capable()) - return 0; - - hpet_virt_address = ioremap_nocache(hpet_address, HPET_MMAP_SIZE); - - /* - * Read the period and check for a sane value: - */ - hpet_period = hpet_readl(HPET_PERIOD); - if (hpet_period < HPET_MIN_PERIOD || hpet_period > HPET_MAX_PERIOD) - goto out_nohpet; - - /* - * The period is a femto seconds value. We need to calculate the - * scaled math multiplication factor for nanosecond to hpet tick - * conversion. - */ - hpet_freq = 1000000000000000ULL; - do_div(hpet_freq, hpet_period); - hpet_clockevent.mult = div_sc((unsigned long) hpet_freq, - NSEC_PER_SEC, 32); - /* Calculate the min / max delta */ - hpet_clockevent.max_delta_ns = clockevent_delta2ns(0x7FFFFFFF, - &hpet_clockevent); - hpet_clockevent.min_delta_ns = clockevent_delta2ns(0x30, - &hpet_clockevent); - - /* - * Read the HPET ID register to retrieve the IRQ routing - * information and the number of channels - */ - id = hpet_readl(HPET_ID); - -#ifdef CONFIG_HPET_EMULATE_RTC - /* - * The legacy routing mode needs at least two channels, tick timer - * and the rtc emulation channel. - */ - if (!(id & HPET_ID_NUMBER)) - goto out_nohpet; -#endif - /* Start the counter */ hpet_start_counter(); @@ -298,7 +343,7 @@ int __init hpet_enable(void) if (t1 == read_hpet()) { printk(KERN_WARNING "HPET counter not counting. HPET disabled\n"); - goto out_nohpet; + return -ENODEV; } /* Initialize and register HPET clocksource @@ -319,27 +364,84 @@ int __init hpet_enable(void) clocksource_register(&clocksource_hpet); + return 0; +} + +/* + * Try to setup the HPET timer + */ +int __init hpet_enable(void) +{ + unsigned long id; + + if (!is_hpet_capable()) + return 0; + + hpet_set_mapping(); + + /* + * Read the period and check for a sane value: + */ + hpet_period = hpet_readl(HPET_PERIOD); + if (hpet_period < HPET_MIN_PERIOD || hpet_period > HPET_MAX_PERIOD) + goto out_nohpet; + + /* + * Read the HPET ID register to retrieve the IRQ routing + * information and the number of channels + */ + id = hpet_readl(HPET_ID); + +#ifdef CONFIG_HPET_EMULATE_RTC + /* + * The legacy routing mode needs at least two channels, tick timer + * and the rtc emulation channel. + */ + if (!(id & HPET_ID_NUMBER)) + goto out_nohpet; +#endif + + if (hpet_clocksource_register()) + goto out_nohpet; + if (id & HPET_ID_LEGSUP) { - hpet_enable_int(); - hpet_reserve_platform_timers(id); - /* - * Start hpet with the boot cpu mask and make it - * global after the IO_APIC has been initialized. - */ - hpet_clockevent.cpumask = cpumask_of_cpu(smp_processor_id()); - clockevents_register_device(&hpet_clockevent); - global_clock_event = &hpet_clockevent; + hpet_legacy_clockevent_register(); return 1; } return 0; out_nohpet: - iounmap(hpet_virt_address); - hpet_virt_address = NULL; + hpet_clear_mapping(); boot_hpet_disable = 1; return 0; } +/* + * Needs to be late, as the reserve_timer code calls kalloc ! + * + * Not a problem on i386 as hpet_enable is called from late_time_init, + * but on x86_64 it is necessary ! + */ +static __init int hpet_late_init(void) +{ + if (boot_hpet_disable) + return -ENODEV; + + if (!hpet_address) { + if (!force_hpet_address) + return -ENODEV; + + hpet_address = force_hpet_address; + hpet_enable(); + if (!hpet_virt_address) + return -ENODEV; + } + + hpet_reserve_platform_timers(hpet_readl(HPET_ID)); + + return 0; +} +fs_initcall(hpet_late_init); #ifdef CONFIG_HPET_EMULATE_RTC diff --git a/arch/x86/kernel/hpet_64.c b/arch/x86/kernel/hpet_64.c deleted file mode 100644 index e2d1b91..0000000 --- a/arch/x86/kernel/hpet_64.c +++ /dev/null @@ -1,493 +0,0 @@ -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/init.h> -#include <linux/mc146818rtc.h> -#include <linux/time.h> -#include <linux/clocksource.h> -#include <linux/ioport.h> -#include <linux/acpi.h> -#include <linux/hpet.h> -#include <asm/pgtable.h> -#include <asm/vsyscall.h> -#include <asm/timex.h> -#include <asm/hpet.h> - -#define HPET_MASK 0xFFFFFFFF -#define HPET_SHIFT 22 - -/* FSEC = 10^-15 NSEC = 10^-9 */ -#define FSEC_PER_NSEC 1000000 - -int nohpet __initdata; - -unsigned long hpet_address; -unsigned long hpet_period; /* fsecs / HPET clock */ -unsigned long hpet_tick; /* HPET clocks / interrupt */ - -int hpet_use_timer; /* Use counter of hpet for time keeping, - * otherwise PIT - */ - -#ifdef CONFIG_HPET -static __init int late_hpet_init(void) -{ - struct hpet_data hd; - unsigned int ntimer; - - if (!hpet_address) - return 0; - - memset(&hd, 0, sizeof(hd)); - - ntimer = hpet_readl(HPET_ID); - ntimer = (ntimer & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT; - ntimer++; - - /* - * Register with driver. - * Timer0 and Timer1 is used by platform. - */ - hd.hd_phys_address = hpet_address; - hd.hd_address = (void __iomem *)fix_to_virt(FIX_HPET_BASE); - hd.hd_nirqs = ntimer; - hd.hd_flags = HPET_DATA_PLATFORM; - hpet_reserve_timer(&hd, 0); -#ifdef CONFIG_HPET_EMULATE_RTC - hpet_reserve_timer(&hd, 1); -#endif - hd.hd_irq[0] = HPET_LEGACY_8254; - hd.hd_irq[1] = HPET_LEGACY_RTC; - if (ntimer > 2) { - struct hpet *hpet; - struct hpet_timer *timer; - int i; - - hpet = (struct hpet *) fix_to_virt(FIX_HPET_BASE); - timer = &hpet->hpet_timers[2]; - for (i = 2; i < ntimer; timer++, i++) - hd.hd_irq[i] = (timer->hpet_config & - Tn_INT_ROUTE_CNF_MASK) >> - Tn_INT_ROUTE_CNF_SHIFT; - - } - - hpet_alloc(&hd); - return 0; -} -fs_initcall(late_hpet_init); -#endif - -int hpet_timer_stop_set_go(unsigned long tick) -{ - unsigned int cfg; - -/* - * Stop the timers and reset the main counter. - */ - - cfg = hpet_readl(HPET_CFG); - cfg &= ~(HPET_CFG_ENABLE | HPET_CFG_LEGACY); - hpet_writel(cfg, HPET_CFG); - hpet_writel(0, HPET_COUNTER); - hpet_writel(0, HPET_COUNTER + 4); - -/* - * Set up timer 0, as periodic with first interrupt to happen at hpet_tick, - * and period also hpet_tick. - */ - if (hpet_use_timer) { - hpet_writel(HPET_TN_ENABLE | HPET_TN_PERIODIC | HPET_TN_SETVAL | - HPET_TN_32BIT, HPET_T0_CFG); - hpet_writel(hpet_tick, HPET_T0_CMP); /* next interrupt */ - hpet_writel(hpet_tick, HPET_T0_CMP); /* period */ - cfg |= HPET_CFG_LEGACY; - } -/* - * Go! - */ - - cfg |= HPET_CFG_ENABLE; - hpet_writel(cfg, HPET_CFG); - - return 0; -} - -static cycle_t read_hpet(void) -{ - return (cycle_t)hpet_readl(HPET_COUNTER); -} - -static cycle_t __vsyscall_fn vread_hpet(void) -{ - return readl((void __iomem *)fix_to_virt(VSYSCALL_HPET) + 0xf0); -} - -struct clocksource clocksource_hpet = { - .name = "hpet", - .rating = 250, - .read = read_hpet, - .mask = (cycle_t)HPET_MASK, - .mult = 0, /* set below */ - .shift = HPET_SHIFT, - .flags = CLOCK_SOURCE_IS_CONTINUOUS, - .vread = vread_hpet, -}; - -int __init hpet_arch_init(void) -{ - unsigned int id; - u64 tmp; - - if (!hpet_address) - return -1; - set_fixmap_nocache(FIX_HPET_BASE, hpet_address); - __set_fixmap(VSYSCALL_HPET, hpet_address, PAGE_KERNEL_VSYSCALL_NOCACHE); - -/* - * Read the period, compute tick and quotient. - */ - - id = hpet_readl(HPET_ID); - - if (!(id & HPET_ID_VENDOR) || !(id & HPET_ID_NUMBER)) - return -1; - - hpet_period = hpet_readl(HPET_PERIOD); - if (hpet_period < 100000 || hpet_period > 100000000) - return -1; - - hpet_tick = (FSEC_PER_TICK + hpet_period / 2) / hpet_period; - - hpet_use_timer = (id & HPET_ID_LEGSUP); - - /* - * hpet period is in femto seconds per cycle - * so we need to convert this to ns/cyc units - * aproximated by mult/2^shift - * - * fsec/cyc * 1nsec/1000000fsec = nsec/cyc = mult/2^shift - * fsec/cyc * 1ns/1000000fsec * 2^shift = mult - * fsec/cyc * 2^shift * 1nsec/1000000fsec = mult - * (fsec/cyc << shift)/1000000 = mult - * (hpet_period << shift)/FSEC_PER_NSEC = mult - */ - tmp = (u64)hpet_period << HPET_SHIFT; - do_div(tmp, FSEC_PER_NSEC); - clocksource_hpet.mult = (u32)tmp; - clocksource_register(&clocksource_hpet); - - return hpet_timer_stop_set_go(hpet_tick); -} - -int hpet_reenable(void) -{ - return hpet_timer_stop_set_go(hpet_tick); -} - -/* - * calibrate_tsc() calibrates the processor TSC in a very simple way, comparing - * it to the HPET timer of known frequency. - */ - -#define TICK_COUNT 100000000 -#define SMI_THRESHOLD 50000 -#define MAX_TRIES 5 - -/* - * Some platforms take periodic SMI interrupts with 5ms duration. Make sure none - * occurs between the reads of the hpet & TSC. - */ -static void __init read_hpet_tsc(int *hpet, int *tsc) -{ - int tsc1, tsc2, hpet1, i; - - for (i = 0; i < MAX_TRIES; i++) { - tsc1 = get_cycles_sync(); - hpet1 = hpet_readl(HPET_COUNTER); - tsc2 = get_cycles_sync(); - if ((tsc2 - tsc1) < SMI_THRESHOLD) - break; - } - *hpet = hpet1; - *tsc = tsc2; -} - -unsigned int __init hpet_calibrate_tsc(void) -{ - int tsc_start, hpet_start; - int tsc_now, hpet_now; - unsigned long flags; - - local_irq_save(flags); - - read_hpet_tsc(&hpet_start, &tsc_start); - - do { - local_irq_disable(); - read_hpet_tsc(&hpet_now, &tsc_now); - local_irq_restore(flags); - } while ((tsc_now - tsc_start) < TICK_COUNT && - (hpet_now - hpet_start) < TICK_COUNT); - - return (tsc_now - tsc_start) * 1000000000L - / ((hpet_now - hpet_start) * hpet_period / 1000); -} - -#ifdef CONFIG_HPET_EMULATE_RTC -/* HPET in LegacyReplacement Mode eats up RTC interrupt line. When, HPET - * is enabled, we support RTC interrupt functionality in software. - * RTC has 3 kinds of interrupts: - * 1) Update Interrupt - generate an interrupt, every sec, when RTC clock - * is updated - * 2) Alarm Interrupt - generate an interrupt at a specific time of day - * 3) Periodic Interrupt - generate periodic interrupt, with frequencies - * 2Hz-8192Hz (2Hz-64Hz for non-root user) (all freqs in powers of 2) - * (1) and (2) above are implemented using polling at a frequency of - * 64 Hz. The exact frequency is a tradeoff between accuracy and interrupt - * overhead. (DEFAULT_RTC_INT_FREQ) - * For (3), we use interrupts at 64Hz or user specified periodic - * frequency, whichever is higher. - */ -#include <linux/rtc.h> - -#define DEFAULT_RTC_INT_FREQ 64 -#define RTC_NUM_INTS 1 - -static unsigned long UIE_on; -static unsigned long prev_update_sec; - -static unsigned long AIE_on; -static struct rtc_time alarm_time; - -static unsigned long PIE_on; -static unsigned long PIE_freq = DEFAULT_RTC_INT_FREQ; -static unsigned long PIE_count; - -static unsigned long hpet_rtc_int_freq; /* RTC interrupt frequency */ -static unsigned int hpet_t1_cmp; /* cached comparator register */ - -int is_hpet_enabled(void) -{ - return hpet_address != 0; -} - -/* - * Timer 1 for RTC, we do not use periodic interrupt feature, - * even if HPET supports periodic interrupts on Timer 1. - * The reason being, to set up a periodic interrupt in HPET, we need to - * stop the main counter. And if we do that everytime someone diables/enables - * RTC, we will have adverse effect on main kernel timer running on Timer 0. - * So, for the time being, simulate the periodic interrupt in software. - * - * hpet_rtc_timer_init() is called for the first time and during subsequent - * interuppts reinit happens through hpet_rtc_timer_reinit(). - */ -int hpet_rtc_timer_init(void) -{ - unsigned int cfg, cnt; - unsigned long flags; - - if (!is_hpet_enabled()) - return 0; - /* - * Set the counter 1 and enable the interrupts. - */ - if (PIE_on && (PIE_freq > DEFAULT_RTC_INT_FREQ)) - hpet_rtc_int_freq = PIE_freq; - else - hpet_rtc_int_freq = DEFAULT_RTC_INT_FREQ; - - local_irq_save(flags); - - cnt = hpet_readl(HPET_COUNTER); - cnt += ((hpet_tick*HZ)/hpet_rtc_int_freq); - hpet_writel(cnt, HPET_T1_CMP); - hpet_t1_cmp = cnt; - - cfg = hpet_readl(HPET_T1_CFG); - cfg &= ~HPET_TN_PERIODIC; - cfg |= HPET_TN_ENABLE | HPET_TN_32BIT; - hpet_writel(cfg, HPET_T1_CFG); - - local_irq_restore(flags); - - return 1; -} - -static void hpet_rtc_timer_reinit(void) -{ - unsigned int cfg, cnt, ticks_per_int, lost_ints; - - if (unlikely(!(PIE_on | AIE_on | UIE_on))) { - cfg = hpet_readl(HPET_T1_CFG); - cfg &= ~HPET_TN_ENABLE; - hpet_writel(cfg, HPET_T1_CFG); - return; - } - - if (PIE_on && (PIE_freq > DEFAULT_RTC_INT_FREQ)) - hpet_rtc_int_freq = PIE_freq; - else - hpet_rtc_int_freq = DEFAULT_RTC_INT_FREQ; - - /* It is more accurate to use the comparator value than current count.*/ - ticks_per_int = hpet_tick * HZ / hpet_rtc_int_freq; - hpet_t1_cmp += ticks_per_int; - hpet_writel(hpet_t1_cmp, HPET_T1_CMP); - - /* - * If the interrupt handler was delayed too long, the write above tries - * to schedule the next interrupt in the past and the hardware would - * not interrupt until the counter had wrapped around. - * So we have to check that the comparator wasn't set to a past time. - */ - cnt = hpet_readl(HPET_COUNTER); - if (unlikely((int)(cnt - hpet_t1_cmp) > 0)) { - lost_ints = (cnt - hpet_t1_cmp) / ticks_per_int + 1; - /* Make sure that, even with the time needed to execute - * this code, the next scheduled interrupt has been moved - * back to the future: */ - lost_ints++; - - hpet_t1_cmp += lost_ints * ticks_per_int; - hpet_writel(hpet_t1_cmp, HPET_T1_CMP); - - if (PIE_on) - PIE_count += lost_ints; - - if (printk_ratelimit()) - printk(KERN_WARNING "rtc: lost some interrupts at %ldHz.\n", - hpet_rtc_int_freq); - } -} - -/* - * The functions below are called from rtc driver. - * Return 0 if HPET is not being used. - * Otherwise do the necessary changes and return 1. - */ -int hpet_mask_rtc_irq_bit(unsigned long bit_mask) -{ - if (!is_hpet_enabled()) - return 0; - - if (bit_mask & RTC_UIE) - UIE_on = 0; - if (bit_mask & RTC_PIE) - PIE_on = 0; - if (bit_mask & RTC_AIE) - AIE_on = 0; - - return 1; -} - -int hpet_set_rtc_irq_bit(unsigned long bit_mask) -{ - int timer_init_reqd = 0; - - if (!is_hpet_enabled()) - return 0; - - if (!(PIE_on | AIE_on | UIE_on)) - timer_init_reqd = 1; - - if (bit_mask & RTC_UIE) { - UIE_on = 1; - } - if (bit_mask & RTC_PIE) { - PIE_on = 1; - PIE_count = 0; - } - if (bit_mask & RTC_AIE) { - AIE_on = 1; - } - - if (timer_init_reqd) - hpet_rtc_timer_init(); - - return 1; -} - -int hpet_set_alarm_time(unsigned char hrs, unsigned char min, unsigned char sec) -{ - if (!is_hpet_enabled()) - return 0; - - alarm_time.tm_hour = hrs; - alarm_time.tm_min = min; - alarm_time.tm_sec = sec; - - return 1; -} - -int hpet_set_periodic_freq(unsigned long freq) -{ - if (!is_hpet_enabled()) - return 0; - - PIE_freq = freq; - PIE_count = 0; - - return 1; -} - -int hpet_rtc_dropped_irq(void) -{ - if (!is_hpet_enabled()) - return 0; - - return 1; -} - -irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id) -{ - struct rtc_time curr_time; - unsigned long rtc_int_flag = 0; - int call_rtc_interrupt = 0; - - hpet_rtc_timer_reinit(); - - if (UIE_on | AIE_on) { - rtc_get_rtc_time(&curr_time); - } - if (UIE_on) { - if (curr_time.tm_sec != prev_update_sec) { - /* Set update int info, call real rtc int routine */ - call_rtc_interrupt = 1; - rtc_int_flag = RTC_UF; - prev_update_sec = curr_time.tm_sec; - } - } - if (PIE_on) { - PIE_count++; - if (PIE_count >= hpet_rtc_int_freq/PIE_freq) { - /* Set periodic int info, call real rtc int routine */ - call_rtc_interrupt = 1; - rtc_int_flag |= RTC_PF; - PIE_count = 0; - } - } - if (AIE_on) { - if ((curr_time.tm_sec == alarm_time.tm_sec) && - (curr_time.tm_min == alarm_time.tm_min) && - (curr_time.tm_hour == alarm_time.tm_hour)) { - /* Set alarm int info, call real rtc int routine */ - call_rtc_interrupt = 1; - rtc_int_flag |= RTC_AF; - } - } - if (call_rtc_interrupt) { - rtc_int_flag |= (RTC_IRQF | (RTC_NUM_INTS << 8)); - rtc_interrupt(rtc_int_flag, dev_id); - } - return IRQ_HANDLED; -} -#endif - -static int __init nohpet_setup(char *s) -{ - nohpet = 1; - return 1; -} - -__setup("nohpet", nohpet_setup); diff --git a/arch/x86/kernel/i8253_32.c b/arch/x86/kernel/i8253.c index 6d839f2..ac15e4c 100644 --- a/arch/x86/kernel/i8253_32.c +++ b/arch/x86/kernel/i8253.c @@ -13,7 +13,6 @@ #include <asm/delay.h> #include <asm/i8253.h> #include <asm/io.h> -#include <asm/timer.h> DEFINE_SPINLOCK(i8253_lock); EXPORT_SYMBOL(i8253_lock); @@ -120,6 +119,7 @@ void __init setup_pit_timer(void) global_clock_event = &pit_clockevent; } +#ifndef CONFIG_X86_64 /* * Since the PIT overflows every tick, its not very useful * to just read by itself. So use jiffies to emulate a free @@ -204,3 +204,5 @@ static int __init init_pit_clocksource(void) return clocksource_register(&clocksource_pit); } arch_initcall(init_pit_clocksource); + +#endif diff --git a/arch/x86/kernel/i8259_32.c b/arch/x86/kernel/i8259_32.c index 0499cbe..679bb33 100644 --- a/arch/x86/kernel/i8259_32.c +++ b/arch/x86/kernel/i8259_32.c @@ -10,7 +10,6 @@ #include <linux/sysdev.h> #include <linux/bitops.h> -#include <asm/8253pit.h> #include <asm/atomic.h> #include <asm/system.h> #include <asm/io.h> diff --git a/arch/x86/kernel/i8259_64.c b/arch/x86/kernel/i8259_64.c index 948cae6..eb72976 100644 --- a/arch/x86/kernel/i8259_64.c +++ b/arch/x86/kernel/i8259_64.c @@ -444,46 +444,6 @@ void __init init_ISA_irqs (void) } } -static void setup_timer_hardware(void) -{ - outb_p(0x34,0x43); /* binary, mode 2, LSB/MSB, ch 0 */ - udelay(10); - outb_p(LATCH & 0xff , 0x40); /* LSB */ - udelay(10); - outb(LATCH >> 8 , 0x40); /* MSB */ -} - -static int timer_resume(struct sys_device *dev) -{ - setup_timer_hardware(); - return 0; -} - -void i8254_timer_resume(void) -{ - setup_timer_hardware(); -} - -static struct sysdev_class timer_sysclass = { - set_kset_name("timer_pit"), - .resume = timer_resume, -}; - -static struct sys_device device_timer = { - .id = 0, - .cls = &timer_sysclass, -}; - -static int __init init_timer_sysfs(void) -{ - int error = sysdev_class_register(&timer_sysclass); - if (!error) - error = sysdev_register(&device_timer); - return error; -} - -device_initcall(init_timer_sysfs); - void __init init_IRQ(void) { int i; @@ -533,12 +493,6 @@ void __init init_IRQ(void) set_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); set_intr_gate(ERROR_APIC_VECTOR, error_interrupt); - /* - * Set the clock to HZ Hz, we already have a valid - * vector now: - */ - setup_timer_hardware(); - if (!acpi_ioapic) setup_irq(2, &irq2); } diff --git a/arch/x86/kernel/mfgpt_32.c b/arch/x86/kernel/mfgpt_32.c new file mode 100644 index 0000000..0ab680f --- /dev/null +++ b/arch/x86/kernel/mfgpt_32.c @@ -0,0 +1,362 @@ +/* + * Driver/API for AMD Geode Multi-Function General Purpose Timers (MFGPT) + * + * Copyright (C) 2006, Advanced Micro Devices, Inc. + * Copyright (C) 2007, Andres Salomon <dilinger@debian.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of version 2 of the GNU General Public License + * as published by the Free Software Foundation. + * + * The MFGPTs are documented in AMD Geode CS5536 Companion Device Data Book. + */ + +/* + * We are using the 32Khz input clock - its the only one that has the + * ranges we find desirable. The following table lists the suitable + * divisors and the associated hz, minimum interval + * and the maximum interval: + * + * Divisor Hz Min Delta (S) Max Delta (S) + * 1 32000 .0005 2.048 + * 2 16000 .001 4.096 + * 4 8000 .002 8.192 + * 8 4000 .004 16.384 + * 16 2000 .008 32.768 + * 32 1000 .016 65.536 + * 64 500 .032 131.072 + * 128 250 .064 262.144 + * 256 125 .128 524.288 + */ + +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <asm/geode.h> + +#define F_AVAIL 0x01 + +static struct mfgpt_timer_t { + int flags; + struct module *owner; +} mfgpt_timers[MFGPT_MAX_TIMERS]; + +/* Selected from the table above */ + +#define MFGPT_DIVISOR 16 +#define MFGPT_SCALE 4 /* divisor = 2^(scale) */ +#define MFGPT_HZ (32000 / MFGPT_DIVISOR) +#define MFGPT_PERIODIC (MFGPT_HZ / HZ) + +#ifdef CONFIG_GEODE_MFGPT_TIMER +static int __init mfgpt_timer_setup(void); +#else +#define mfgpt_timer_setup() (0) +#endif + +/* Allow for disabling of MFGPTs */ +static int disable; +static int __init mfgpt_disable(char *s) +{ + disable = 1; + return 1; +} +__setup("nomfgpt", mfgpt_disable); + +/* + * Check whether any MFGPTs are available for the kernel to use. In most + * cases, firmware that uses AMD's VSA code will claim all timers during + * bootup; we certainly don't want to take them if they're already in use. + * In other cases (such as with VSAless OpenFirmware), the system firmware + * leaves timers available for us to use. + */ +int __init geode_mfgpt_detect(void) +{ + int count = 0, i; + u16 val; + + if (disable) { + printk(KERN_INFO "geode-mfgpt: Skipping MFGPT setup\n"); + return 0; + } + + for (i = 0; i < MFGPT_MAX_TIMERS; i++) { + val = geode_mfgpt_read(i, MFGPT_REG_SETUP); + if (!(val & MFGPT_SETUP_SETUP)) { + mfgpt_timers[i].flags = F_AVAIL; + count++; + } + } + + /* set up clock event device, if desired */ + i = mfgpt_timer_setup(); + + return count; +} + +int geode_mfgpt_toggle_event(int timer, int cmp, int event, int enable) +{ + u32 msr, mask, value, dummy; + int shift = (cmp == MFGPT_CMP1) ? 0 : 8; + + if (timer < 0 || timer >= MFGPT_MAX_TIMERS) + return -EIO; + + /* + * The register maps for these are described in sections 6.17.1.x of + * the AMD Geode CS5536 Companion Device Data Book. + */ + switch (event) { + case MFGPT_EVENT_RESET: + /* + * XXX: According to the docs, we cannot reset timers above + * 6; that is, resets for 7 and 8 will be ignored. Is this + * a problem? -dilinger + */ + msr = MFGPT_NR_MSR; + mask = 1 << (timer + 24); + break; + + case MFGPT_EVENT_NMI: + msr = MFGPT_NR_MSR; + mask = 1 << (timer + shift); + break; + + case MFGPT_EVENT_IRQ: + msr = MFGPT_IRQ_MSR; + mask = 1 << (timer + shift); + break; + + default: + return -EIO; + } + + rdmsr(msr, value, dummy); + + if (enable) + value |= mask; + else + value &= ~mask; + + wrmsr(msr, value, dummy); + return 0; +} + +int geode_mfgpt_set_irq(int timer, int cmp, int irq, int enable) +{ + u32 val, dummy; + int offset; + + if (timer < 0 || timer >= MFGPT_MAX_TIMERS) + return -EIO; + + if (geode_mfgpt_toggle_event(timer, cmp, MFGPT_EVENT_IRQ, enable)) + return -EIO; + + rdmsr(MSR_PIC_ZSEL_LOW, val, dummy); + + offset = (timer % 4) * 4; + + val &= ~((0xF << offset) | (0xF << (offset + 16))); + + if (enable) { + val |= (irq & 0x0F) << (offset); + val |= (irq & 0x0F) << (offset + 16); + } + + wrmsr(MSR_PIC_ZSEL_LOW, val, dummy); + return 0; +} + +static int mfgpt_get(int timer, struct module *owner) +{ + mfgpt_timers[timer].flags &= ~F_AVAIL; + mfgpt_timers[timer].owner = owner; + printk(KERN_INFO "geode-mfgpt: Registered timer %d\n", timer); + return timer; +} + +int geode_mfgpt_alloc_timer(int timer, int domain, struct module *owner) +{ + int i; + + if (!geode_get_dev_base(GEODE_DEV_MFGPT)) + return -ENODEV; + if (timer >= MFGPT_MAX_TIMERS) + return -EIO; + + if (timer < 0) { + /* Try to find an available timer */ + for (i = 0; i < MFGPT_MAX_TIMERS; i++) { + if (mfgpt_timers[i].flags & F_AVAIL) + return mfgpt_get(i, owner); + + if (i == 5 && domain == MFGPT_DOMAIN_WORKING) + break; + } + } else { + /* If they requested a specific timer, try to honor that */ + if (mfgpt_timers[timer].flags & F_AVAIL) + return mfgpt_get(timer, owner); + } + + /* No timers available - too bad */ + return -1; +} + + +#ifdef CONFIG_GEODE_MFGPT_TIMER + +/* + * The MFPGT timers on the CS5536 provide us with suitable timers to use + * as clock event sources - not as good as a HPET or APIC, but certainly + * better then the PIT. This isn't a general purpose MFGPT driver, but + * a simplified one designed specifically to act as a clock event source. + * For full details about the MFGPT, please consult the CS5536 data sheet. + */ + +#include <linux/clocksource.h> +#include <linux/clockchips.h> + +static unsigned int mfgpt_tick_mode = CLOCK_EVT_MODE_SHUTDOWN; +static u16 mfgpt_event_clock; + +static int irq = 7; +static int __init mfgpt_setup(char *str) +{ + get_option(&str, &irq); + return 1; +} +__setup("mfgpt_irq=", mfgpt_setup); + +static inline void mfgpt_disable_timer(u16 clock) +{ + u16 val = geode_mfgpt_read(clock, MFGPT_REG_SETUP); + geode_mfgpt_write(clock, MFGPT_REG_SETUP, val & ~MFGPT_SETUP_CNTEN); +} + +static int mfgpt_next_event(unsigned long, struct clock_event_device *); +static void mfgpt_set_mode(enum clock_event_mode, struct clock_event_device *); + +static struct clock_event_device mfgpt_clockevent = { + .name = "mfgpt-timer", + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .set_mode = mfgpt_set_mode, + .set_next_event = mfgpt_next_event, + .rating = 250, + .cpumask = CPU_MASK_ALL, + .shift = 32 +}; + +static inline void mfgpt_start_timer(u16 clock, u16 delta) +{ + geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_CMP2, (u16) delta); + geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_COUNTER, 0); + + geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_SETUP, + MFGPT_SETUP_CNTEN | MFGPT_SETUP_CMP2); +} + +static void mfgpt_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + mfgpt_disable_timer(mfgpt_event_clock); + + if (mode == CLOCK_EVT_MODE_PERIODIC) + mfgpt_start_timer(mfgpt_event_clock, MFGPT_PERIODIC); + + mfgpt_tick_mode = mode; +} + +static int mfgpt_next_event(unsigned long delta, struct clock_event_device *evt) +{ + mfgpt_start_timer(mfgpt_event_clock, delta); + return 0; +} + +/* Assume (foolishly?), that this interrupt was due to our tick */ + +static irqreturn_t mfgpt_tick(int irq, void *dev_id) +{ + if (mfgpt_tick_mode == CLOCK_EVT_MODE_SHUTDOWN) + return IRQ_HANDLED; + + /* Turn off the clock */ + mfgpt_disable_timer(mfgpt_event_clock); + + /* Clear the counter */ + geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_COUNTER, 0); + + /* Restart the clock in periodic mode */ + + if (mfgpt_tick_mode == CLOCK_EVT_MODE_PERIODIC) { + geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_SETUP, + MFGPT_SETUP_CNTEN | MFGPT_SETUP_CMP2); + } + + mfgpt_clockevent.event_handler(&mfgpt_clockevent); + return IRQ_HANDLED; +} + +static struct irqaction mfgptirq = { + .handler = mfgpt_tick, + .flags = IRQF_DISABLED | IRQF_NOBALANCING, + .mask = CPU_MASK_NONE, + .name = "mfgpt-timer" +}; + +static int __init mfgpt_timer_setup(void) +{ + int timer, ret; + u16 val; + + timer = geode_mfgpt_alloc_timer(MFGPT_TIMER_ANY, MFGPT_DOMAIN_WORKING, + THIS_MODULE); + if (timer < 0) { + printk(KERN_ERR + "mfgpt-timer: Could not allocate a MFPGT timer\n"); + return -ENODEV; + } + + mfgpt_event_clock = timer; + /* Set the clock scale and enable the event mode for CMP2 */ + val = MFGPT_SCALE | (3 << 8); + + geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_SETUP, val); + + /* Set up the IRQ on the MFGPT side */ + if (geode_mfgpt_setup_irq(mfgpt_event_clock, MFGPT_CMP2, irq)) { + printk(KERN_ERR "mfgpt-timer: Could not set up IRQ %d\n", irq); + return -EIO; + } + + /* And register it with the kernel */ + ret = setup_irq(irq, &mfgptirq); + + if (ret) { + printk(KERN_ERR + "mfgpt-timer: Unable to set up the interrupt.\n"); + goto err; + } + + /* Set up the clock event */ + mfgpt_clockevent.mult = div_sc(MFGPT_HZ, NSEC_PER_SEC, 32); + mfgpt_clockevent.min_delta_ns = clockevent_delta2ns(0xF, + &mfgpt_clockevent); + mfgpt_clockevent.max_delta_ns = clockevent_delta2ns(0xFFFE, + &mfgpt_clockevent); + + printk(KERN_INFO + "mfgpt-timer: registering the MFGT timer as a clock event.\n"); + clockevents_register_device(&mfgpt_clockevent); + + return 0; + +err: + geode_mfgpt_release_irq(mfgpt_event_clock, MFGPT_CMP2, irq); + printk(KERN_ERR + "mfgpt-timer: Unable to set up the MFGPT clock source\n"); + return -EIO; +} + +#endif diff --git a/arch/x86/kernel/nmi_32.c b/arch/x86/kernel/nmi_32.c index c7227e2..95d3fc2 100644 --- a/arch/x86/kernel/nmi_32.c +++ b/arch/x86/kernel/nmi_32.c @@ -353,7 +353,8 @@ __kprobes int nmi_watchdog_tick(struct pt_regs * regs, unsigned reason) * Take the local apic timer and PIT/HPET into account. We don't * know which one is active, when we have highres/dyntick on */ - sum = per_cpu(irq_stat, cpu).apic_timer_irqs + kstat_cpu(cpu).irqs[0]; + sum = per_cpu(irq_stat, cpu).apic_timer_irqs + + per_cpu(irq_stat, cpu).irq0_irqs; /* if the none of the timers isn't firing, this cpu isn't doing much */ if (!touched && last_irq_sums[cpu] == sum) { diff --git a/arch/x86/kernel/nmi_64.c b/arch/x86/kernel/nmi_64.c index 0ec6d2d..e60ac0d 100644 --- a/arch/x86/kernel/nmi_64.c +++ b/arch/x86/kernel/nmi_64.c @@ -329,7 +329,7 @@ int __kprobes nmi_watchdog_tick(struct pt_regs * regs, unsigned reason) touched = 1; } - sum = read_pda(apic_timer_irqs); + sum = read_pda(apic_timer_irqs) + read_pda(irq0_irqs); if (__get_cpu_var(nmi_touch)) { __get_cpu_var(nmi_touch) = 0; touched = 1; diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c index 9895655..6f9dbbe 100644 --- a/arch/x86/kernel/process_64.c +++ b/arch/x86/kernel/process_64.c @@ -38,6 +38,7 @@ #include <linux/notifier.h> #include <linux/kprobes.h> #include <linux/kdebug.h> +#include <linux/tick.h> #include <asm/uaccess.h> #include <asm/pgtable.h> @@ -208,6 +209,8 @@ void cpu_idle (void) if (__get_cpu_var(cpu_idle_state)) __get_cpu_var(cpu_idle_state) = 0; + tick_nohz_stop_sched_tick(); + rmb(); idle = pm_idle; if (!idle) @@ -228,6 +231,7 @@ void cpu_idle (void) __exit_idle(); } + tick_nohz_restart_sched_tick(); preempt_enable_no_resched(); schedule(); preempt_disable(); diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c index 6722469..d769e20 100644 --- a/arch/x86/kernel/quirks.c +++ b/arch/x86/kernel/quirks.c @@ -4,6 +4,8 @@ #include <linux/pci.h> #include <linux/irq.h> +#include <asm/hpet.h> + #if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_SMP) && defined(CONFIG_PCI) static void __devinit quirk_intel_irqbalance(struct pci_dev *dev) @@ -47,3 +49,206 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7320_MCH, quir DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7525_MCH, quirk_intel_irqbalance); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, quirk_intel_irqbalance); #endif + +#if defined(CONFIG_HPET_TIMER) +unsigned long force_hpet_address; + +static enum { + NONE_FORCE_HPET_RESUME, + OLD_ICH_FORCE_HPET_RESUME, + ICH_FORCE_HPET_RESUME +} force_hpet_resume_type; + +static void __iomem *rcba_base; + +static void ich_force_hpet_resume(void) +{ + u32 val; + + if (!force_hpet_address) + return; + + if (rcba_base == NULL) + BUG(); + + /* read the Function Disable register, dword mode only */ + val = readl(rcba_base + 0x3404); + if (!(val & 0x80)) { + /* HPET disabled in HPTC. Trying to enable */ + writel(val | 0x80, rcba_base + 0x3404); + } + + val = readl(rcba_base + 0x3404); + if (!(val & 0x80)) + BUG(); + else + printk(KERN_DEBUG "Force enabled HPET at resume\n"); + + return; +} + +static void ich_force_enable_hpet(struct pci_dev *dev) +{ + u32 val; + u32 uninitialized_var(rcba); + int err = 0; + + if (hpet_address || force_hpet_address) + return; + + pci_read_config_dword(dev, 0xF0, &rcba); + rcba &= 0xFFFFC000; + if (rcba == 0) { + printk(KERN_DEBUG "RCBA disabled. Cannot force enable HPET\n"); + return; + } + + /* use bits 31:14, 16 kB aligned */ + rcba_base = ioremap_nocache(rcba, 0x4000); + if (rcba_base == NULL) { + printk(KERN_DEBUG "ioremap failed. Cannot force enable HPET\n"); + return; + } + + /* read the Function Disable register, dword mode only */ + val = readl(rcba_base + 0x3404); + + if (val & 0x80) { + /* HPET is enabled in HPTC. Just not reported by BIOS */ + val = val & 0x3; + force_hpet_address = 0xFED00000 | (val << 12); + printk(KERN_DEBUG "Force enabled HPET at base address 0x%lx\n", + force_hpet_address); + iounmap(rcba_base); + return; + } + + /* HPET disabled in HPTC. Trying to enable */ + writel(val | 0x80, rcba_base + 0x3404); + + val = readl(rcba_base + 0x3404); + if (!(val & 0x80)) { + err = 1; + } else { + val = val & 0x3; + force_hpet_address = 0xFED00000 | (val << 12); + } + + if (err) { + force_hpet_address = 0; + iounmap(rcba_base); + printk(KERN_DEBUG "Failed to force enable HPET\n"); + } else { + force_hpet_resume_type = ICH_FORCE_HPET_RESUME; + printk(KERN_DEBUG "Force enabled HPET at base address 0x%lx\n", + force_hpet_address); + } +} + +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0, + ich_force_enable_hpet); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, + ich_force_enable_hpet); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0, + ich_force_enable_hpet); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1, + ich_force_enable_hpet); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_31, + ich_force_enable_hpet); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_1, + ich_force_enable_hpet); + + +static struct pci_dev *cached_dev; + +static void old_ich_force_hpet_resume(void) +{ + u32 val; + u32 uninitialized_var(gen_cntl); + + if (!force_hpet_address || !cached_dev) + return; + + pci_read_config_dword(cached_dev, 0xD0, &gen_cntl); + gen_cntl &= (~(0x7 << 15)); + gen_cntl |= (0x4 << 15); + + pci_write_config_dword(cached_dev, 0xD0, gen_cntl); + pci_read_config_dword(cached_dev, 0xD0, &gen_cntl); + val = gen_cntl >> 15; + val &= 0x7; + if (val == 0x4) + printk(KERN_DEBUG "Force enabled HPET at resume\n"); + else + BUG(); +} + +static void old_ich_force_enable_hpet(struct pci_dev *dev) +{ + u32 val; + u32 uninitialized_var(gen_cntl); + + if (hpet_address || force_hpet_address) + return; + + pci_read_config_dword(dev, 0xD0, &gen_cntl); + /* + * Bit 17 is HPET enable bit. + * Bit 16:15 control the HPET base address. + */ + val = gen_cntl >> 15; + val &= 0x7; + if (val & 0x4) { + val &= 0x3; + force_hpet_address = 0xFED00000 | (val << 12); + printk(KERN_DEBUG "HPET at base address 0x%lx\n", + force_hpet_address); + return; + } + + /* + * HPET is disabled. Trying enabling at FED00000 and check + * whether it sticks + */ + gen_cntl &= (~(0x7 << 15)); + gen_cntl |= (0x4 << 15); + pci_write_config_dword(dev, 0xD0, gen_cntl); + + pci_read_config_dword(dev, 0xD0, &gen_cntl); + + val = gen_cntl >> 15; + val &= 0x7; + if (val & 0x4) { + /* HPET is enabled in HPTC. Just not reported by BIOS */ + val &= 0x3; + force_hpet_address = 0xFED00000 | (val << 12); + printk(KERN_DEBUG "Force enabled HPET at base address 0x%lx\n", + force_hpet_address); + cached_dev = dev; + force_hpet_resume_type = OLD_ICH_FORCE_HPET_RESUME; + return; + } + + printk(KERN_DEBUG "Failed to force enable HPET\n"); +} + +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, + old_ich_force_enable_hpet); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_12, + old_ich_force_enable_hpet); + +void force_hpet_resume(void) +{ + switch (force_hpet_resume_type) { + case ICH_FORCE_HPET_RESUME: + return ich_force_hpet_resume(); + + case OLD_ICH_FORCE_HPET_RESUME: + return old_ich_force_hpet_resume(); + + default: + break; + } +} + +#endif diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c index af838f6..32054bf 100644 --- a/arch/x86/kernel/setup_64.c +++ b/arch/x86/kernel/setup_64.c @@ -546,6 +546,37 @@ static void __init amd_detect_cmp(struct cpuinfo_x86 *c) #endif } +#define ENABLE_C1E_MASK 0x18000000 +#define CPUID_PROCESSOR_SIGNATURE 1 +#define CPUID_XFAM 0x0ff00000 +#define CPUID_XFAM_K8 0x00000000 +#define CPUID_XFAM_10H 0x00100000 +#define CPUID_XFAM_11H 0x00200000 +#define CPUID_XMOD 0x000f0000 +#define CPUID_XMOD_REV_F 0x00040000 + +/* AMD systems with C1E don't have a working lAPIC timer. Check for that. */ +static __cpuinit int amd_apic_timer_broken(void) +{ + u32 lo, hi; + u32 eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE); + switch (eax & CPUID_XFAM) { + case CPUID_XFAM_K8: + if ((eax & CPUID_XMOD) < CPUID_XMOD_REV_F) + break; + case CPUID_XFAM_10H: + case CPUID_XFAM_11H: + rdmsr(MSR_K8_ENABLE_C1E, lo, hi); + if (lo & ENABLE_C1E_MASK) + return 1; + break; + default: + /* err on the side of caution */ + return 1; + } + return 0; +} + static void __cpuinit init_amd(struct cpuinfo_x86 *c) { unsigned level; @@ -617,6 +648,9 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c) /* Family 10 doesn't support C states in MWAIT so don't use it */ if (c->x86 == 0x10 && !force_mwait) clear_bit(X86_FEATURE_MWAIT, &c->x86_capability); + + if (amd_apic_timer_broken()) + disable_apic_timer = 1; } static void __cpuinit detect_ht(struct cpuinfo_x86 *c) diff --git a/arch/x86/kernel/smpboot_64.c b/arch/x86/kernel/smpboot_64.c index 32f5078..57ccf7c 100644 --- a/arch/x86/kernel/smpboot_64.c +++ b/arch/x86/kernel/smpboot_64.c @@ -223,8 +223,6 @@ void __cpuinit smp_callin(void) local_irq_disable(); Dprintk("Stack at about %p\n",&cpuid); - disable_APIC_timer(); - /* * Save our processor parameters */ @@ -348,8 +346,6 @@ void __cpuinit start_secondary(void) enable_8259A_irq(0); } - enable_APIC_timer(); - /* * The sibling maps must be set before turing the online map on for * this cpu diff --git a/arch/x86/kernel/time_32.c b/arch/x86/kernel/time_32.c index 19a6c67..56dadfc 100644 --- a/arch/x86/kernel/time_32.c +++ b/arch/x86/kernel/time_32.c @@ -157,6 +157,9 @@ EXPORT_SYMBOL(profile_pc); */ irqreturn_t timer_interrupt(int irq, void *dev_id) { + /* Keep nmi watchdog up to date */ + per_cpu(irq_stat, smp_processor_id()).irq0_irqs++; + #ifdef CONFIG_X86_IO_APIC if (timer_ack) { /* diff --git a/arch/x86/kernel/time_64.c b/arch/x86/kernel/time_64.c index 6d48a4e..e0134d6 100644 --- a/arch/x86/kernel/time_64.c +++ b/arch/x86/kernel/time_64.c @@ -28,11 +28,12 @@ #include <linux/cpu.h> #include <linux/kallsyms.h> #include <linux/acpi.h> +#include <linux/clockchips.h> + #ifdef CONFIG_ACPI #include <acpi/achware.h> /* for PM timer frequency */ #include <acpi/acpi_bus.h> #endif -#include <asm/8253pit.h> #include <asm/i8253.h> #include <asm/pgtable.h> #include <asm/vsyscall.h> @@ -47,12 +48,8 @@ #include <asm/nmi.h> #include <asm/vgtod.h> -static char *timename = NULL; - DEFINE_SPINLOCK(rtc_lock); EXPORT_SYMBOL(rtc_lock); -DEFINE_SPINLOCK(i8253_lock); -EXPORT_SYMBOL(i8253_lock); volatile unsigned long __jiffies __section_jiffies = INITIAL_JIFFIES; @@ -153,45 +150,12 @@ int update_persistent_clock(struct timespec now) return set_rtc_mmss(now.tv_sec); } -void main_timer_handler(void) +static irqreturn_t timer_event_interrupt(int irq, void *dev_id) { -/* - * Here we are in the timer irq handler. We have irqs locally disabled (so we - * don't need spin_lock_irqsave()) but we don't know if the timer_bh is running - * on the other CPU, so we need a lock. We also need to lock the vsyscall - * variables, because both do_timer() and us change them -arca+vojtech - */ - - write_seqlock(&xtime_lock); + add_pda(irq0_irqs, 1); -/* - * Do the timer stuff. - */ - - do_timer(1); -#ifndef CONFIG_SMP - update_process_times(user_mode(get_irq_regs())); -#endif + global_clock_event->event_handler(global_clock_event); -/* - * In the SMP case we use the local APIC timer interrupt to do the profiling, - * except when we simulate SMP mode on a uniprocessor system, in that case we - * have to call the local interrupt handler. - */ - - if (!using_apic_timer) - smp_local_timer_interrupt(); - - write_sequnlock(&xtime_lock); -} - -static irqreturn_t timer_interrupt(int irq, void *dev_id) -{ - if (apic_runs_main_timer > 1) - return IRQ_HANDLED; - main_timer_handler(); - if (using_apic_timer) - smp_send_timer_broadcast_ipi(); return IRQ_HANDLED; } @@ -292,97 +256,21 @@ static unsigned int __init tsc_calibrate_cpu_khz(void) return pmc_now * tsc_khz / (tsc_now - tsc_start); } -/* - * pit_calibrate_tsc() uses the speaker output (channel 2) of - * the PIT. This is better than using the timer interrupt output, - * because we can read the value of the speaker with just one inb(), - * where we need three i/o operations for the interrupt channel. - * We count how many ticks the TSC does in 50 ms. - */ - -static unsigned int __init pit_calibrate_tsc(void) -{ - unsigned long start, end; - unsigned long flags; - - spin_lock_irqsave(&i8253_lock, flags); - - outb((inb(0x61) & ~0x02) | 0x01, 0x61); - - outb(0xb0, 0x43); - outb((PIT_TICK_RATE / (1000 / 50)) & 0xff, 0x42); - outb((PIT_TICK_RATE / (1000 / 50)) >> 8, 0x42); - start = get_cycles_sync(); - while ((inb(0x61) & 0x20) == 0); - end = get_cycles_sync(); - - spin_unlock_irqrestore(&i8253_lock, flags); - - return (end - start) / 50; -} - -#define PIT_MODE 0x43 -#define PIT_CH0 0x40 - -static void __pit_init(int val, u8 mode) -{ - unsigned long flags; - - spin_lock_irqsave(&i8253_lock, flags); - outb_p(mode, PIT_MODE); - outb_p(val & 0xff, PIT_CH0); /* LSB */ - outb_p(val >> 8, PIT_CH0); /* MSB */ - spin_unlock_irqrestore(&i8253_lock, flags); -} - -void __init pit_init(void) -{ - __pit_init(LATCH, 0x34); /* binary, mode 2, LSB/MSB, ch 0 */ -} - -void pit_stop_interrupt(void) -{ - __pit_init(0, 0x30); /* mode 0 */ -} - -void stop_timer_interrupt(void) -{ - char *name; - if (hpet_address) { - name = "HPET"; - hpet_timer_stop_set_go(0); - } else { - name = "PIT"; - pit_stop_interrupt(); - } - printk(KERN_INFO "timer: %s interrupt stopped.\n", name); -} - static struct irqaction irq0 = { - .handler = timer_interrupt, - .flags = IRQF_DISABLED | IRQF_IRQPOLL, + .handler = timer_event_interrupt, + .flags = IRQF_DISABLED | IRQF_IRQPOLL | IRQF_NOBALANCING, .mask = CPU_MASK_NONE, .name = "timer" }; void __init time_init(void) { - if (nohpet) - hpet_address = 0; + if (!hpet_enable()) + setup_pit_timer(); - if (hpet_arch_init()) - hpet_address = 0; + setup_irq(0, &irq0); - if (hpet_use_timer) { - /* set tick_nsec to use the proper rate for HPET */ - tick_nsec = TICK_NSEC_HPET; - tsc_khz = hpet_calibrate_tsc(); - timename = "HPET"; - } else { - pit_init(); - tsc_khz = pit_calibrate_tsc(); - timename = "PIT"; - } + tsc_calibrate(); cpu_khz = tsc_khz; if (cpu_has(&boot_cpu_data, X86_FEATURE_CONSTANT_TSC) && @@ -398,50 +286,7 @@ void __init time_init(void) else vgetcpu_mode = VGETCPU_LSL; - set_cyc2ns_scale(tsc_khz); printk(KERN_INFO "time.c: Detected %d.%03d MHz processor.\n", cpu_khz / 1000, cpu_khz % 1000); init_tsc_clocksource(); - - setup_irq(0, &irq0); -} - -/* - * sysfs support for the timer. - */ - -static int timer_suspend(struct sys_device *dev, pm_message_t state) -{ - return 0; -} - -static int timer_resume(struct sys_device *dev) -{ - if (hpet_address) - hpet_reenable(); - else - i8254_timer_resume(); - return 0; } - -static struct sysdev_class timer_sysclass = { - .resume = timer_resume, - .suspend = timer_suspend, - set_kset_name("timer"), -}; - -/* XXX this sysfs stuff should probably go elsewhere later -john */ -static struct sys_device device_timer = { - .id = 0, - .cls = &timer_sysclass, -}; - -static int time_init_device(void) -{ - int error = sysdev_class_register(&timer_sysclass); - if (!error) - error = sysdev_register(&device_timer); - return error; -} - -device_initcall(time_init_device); diff --git a/arch/x86/kernel/tsc_64.c b/arch/x86/kernel/tsc_64.c index 2a59bde..9f22e54 100644 --- a/arch/x86/kernel/tsc_64.c +++ b/arch/x86/kernel/tsc_64.c @@ -6,7 +6,9 @@ #include <linux/time.h> #include <linux/acpi.h> #include <linux/cpufreq.h> +#include <linux/acpi_pmtmr.h> +#include <asm/hpet.h> #include <asm/timex.h> static int notsc __initdata = 0; @@ -18,7 +20,7 @@ EXPORT_SYMBOL(tsc_khz); static unsigned int cyc2ns_scale __read_mostly; -void set_cyc2ns_scale(unsigned long khz) +static inline void set_cyc2ns_scale(unsigned long khz) { cyc2ns_scale = (NSEC_PER_MSEC << NS_SCALE) / khz; } @@ -118,6 +120,95 @@ core_initcall(cpufreq_tsc); #endif +#define MAX_RETRIES 5 +#define SMI_TRESHOLD 50000 + +/* + * Read TSC and the reference counters. Take care of SMI disturbance + */ +static unsigned long __init tsc_read_refs(unsigned long *pm, + unsigned long *hpet) +{ + unsigned long t1, t2; + int i; + + for (i = 0; i < MAX_RETRIES; i++) { + t1 = get_cycles_sync(); + if (hpet) + *hpet = hpet_readl(HPET_COUNTER) & 0xFFFFFFFF; + else + *pm = acpi_pm_read_early(); + t2 = get_cycles_sync(); + if ((t2 - t1) < SMI_TRESHOLD) + return t2; + } + return ULONG_MAX; +} + +/** + * tsc_calibrate - calibrate the tsc on boot + */ +void __init tsc_calibrate(void) +{ + unsigned long flags, tsc1, tsc2, tr1, tr2, pm1, pm2, hpet1, hpet2; + int hpet = is_hpet_enabled(); + + local_irq_save(flags); + + tsc1 = tsc_read_refs(&pm1, hpet ? &hpet1 : NULL); + + outb((inb(0x61) & ~0x02) | 0x01, 0x61); + + outb(0xb0, 0x43); + outb((CLOCK_TICK_RATE / (1000 / 50)) & 0xff, 0x42); + outb((CLOCK_TICK_RATE / (1000 / 50)) >> 8, 0x42); + tr1 = get_cycles_sync(); + while ((inb(0x61) & 0x20) == 0); + tr2 = get_cycles_sync(); + + tsc2 = tsc_read_refs(&pm2, hpet ? &hpet2 : NULL); + + local_irq_restore(flags); + + /* + * Preset the result with the raw and inaccurate PIT + * calibration value + */ + tsc_khz = (tr2 - tr1) / 50; + + /* hpet or pmtimer available ? */ + if (!hpet && !pm1 && !pm2) { + printk(KERN_INFO "TSC calibrated against PIT\n"); + return; + } + + /* Check, whether the sampling was disturbed by an SMI */ + if (tsc1 == ULONG_MAX || tsc2 == ULONG_MAX) { + printk(KERN_WARNING "TSC calibration disturbed by SMI, " + "using PIT calibration result\n"); + return; + } + + tsc2 = (tsc2 - tsc1) * 1000000L; + + if (hpet) { + printk(KERN_INFO "TSC calibrated against HPET\n"); + if (hpet2 < hpet1) + hpet2 += 0x100000000; + hpet2 -= hpet1; + tsc1 = (hpet2 * hpet_readl(HPET_PERIOD)) / 1000000; + } else { + printk(KERN_INFO "TSC calibrated against PM_TIMER\n"); + if (pm2 < pm1) + pm2 += ACPI_PM_OVRRUN; + pm2 -= pm1; + tsc1 = (pm2 * 1000000000) / PMTMR_TICKS_PER_SEC; + } + + tsc_khz = tsc2 / tsc1; + set_cyc2ns_scale(tsc_khz); +} + /* * Make an educated guess if the TSC is trustworthy and synchronized * over all CPUs. diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig index b1b98e6..eb80f5a 100644 --- a/arch/x86_64/Kconfig +++ b/arch/x86_64/Kconfig @@ -36,6 +36,18 @@ config GENERIC_CMOS_UPDATE bool default y +config CLOCKSOURCE_WATCHDOG + bool + default y + +config GENERIC_CLOCKEVENTS + bool + default y + +config GENERIC_CLOCKEVENTS_BROADCAST + bool + default y + config ZONE_DMA32 bool default y @@ -130,6 +142,8 @@ source "init/Kconfig" menu "Processor type and features" +source "kernel/time/Kconfig" + choice prompt "Subarchitecture Type" default X86_PC diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 1e8287b..1f6fb38d 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -276,21 +276,12 @@ static void acpi_timer_check_state(int state, struct acpi_processor *pr, static void acpi_propagate_timer_broadcast(struct acpi_processor *pr) { -#ifdef CONFIG_GENERIC_CLOCKEVENTS unsigned long reason; reason = pr->power.timer_broadcast_on_state < INT_MAX ? CLOCK_EVT_NOTIFY_BROADCAST_ON : CLOCK_EVT_NOTIFY_BROADCAST_OFF; clockevents_notify(reason, &pr->id); -#else - cpumask_t mask = cpumask_of_cpu(pr->id); - - if (pr->power.timer_broadcast_on_state < INT_MAX) - on_each_cpu(switch_APIC_timer_to_ipi, &mask, 1, 1); - else - on_each_cpu(switch_ipi_to_APIC_timer, &mask, 1, 1); -#endif } /* Power(C) State timer broadcast control */ @@ -298,8 +289,6 @@ static void acpi_state_timer_broadcast(struct acpi_processor *pr, struct acpi_processor_cx *cx, int broadcast) { -#ifdef CONFIG_GENERIC_CLOCKEVENTS - int state = cx - pr->power.states; if (state >= pr->power.timer_broadcast_on_state) { @@ -309,7 +298,6 @@ static void acpi_state_timer_broadcast(struct acpi_processor *pr, CLOCK_EVT_NOTIFY_BROADCAST_EXIT; clockevents_notify(reason, &pr->id); } -#endif } #else diff --git a/drivers/input/misc/pcspkr.c b/drivers/input/misc/pcspkr.c index 906bf5e..4e2ca6f 100644 --- a/drivers/input/misc/pcspkr.c +++ b/drivers/input/misc/pcspkr.c @@ -17,7 +17,6 @@ #include <linux/init.h> #include <linux/input.h> #include <linux/platform_device.h> -#include <asm/8253pit.h> #include <asm/io.h> MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>"); @@ -28,6 +27,7 @@ MODULE_LICENSE("GPL"); /* Use the global PIT lock ! */ #include <asm/i8253.h> #else +#include <asm/8253pit.h> static DEFINE_SPINLOCK(i8253_lock); #endif diff --git a/include/asm-x86/8253pit.h b/include/asm-x86/8253pit.h deleted file mode 100644 index d3c2b38..0000000 --- a/include/asm-x86/8253pit.h +++ /dev/null @@ -1,5 +0,0 @@ -#ifdef CONFIG_X86_32 -# include "8253pit_32.h" -#else -# include "8253pit_64.h" -#endif diff --git a/include/asm-x86/8253pit_32.h b/include/asm-x86/8253pit_32.h deleted file mode 100644 index 96c7c35..0000000 --- a/include/asm-x86/8253pit_32.h +++ /dev/null @@ -1,12 +0,0 @@ -/* - * 8253/8254 Programmable Interval Timer - */ - -#ifndef _8253PIT_H -#define _8253PIT_H - -#include <asm/timex.h> - -#define PIT_TICK_RATE CLOCK_TICK_RATE - -#endif diff --git a/include/asm-x86/8253pit_64.h b/include/asm-x86/8253pit_64.h deleted file mode 100644 index 285f784..0000000 --- a/include/asm-x86/8253pit_64.h +++ /dev/null @@ -1,10 +0,0 @@ -/* - * 8253/8254 Programmable Interval Timer - */ - -#ifndef _8253PIT_H -#define _8253PIT_H - -#define PIT_TICK_RATE 1193182UL - -#endif diff --git a/include/asm-x86/apic_64.h b/include/asm-x86/apic_64.h index 85125ef..3c8f21e 100644 --- a/include/asm-x86/apic_64.h +++ b/include/asm-x86/apic_64.h @@ -19,7 +19,7 @@ extern int apic_verbosity; extern int apic_runs_main_timer; extern int ioapic_force; -extern int apic_mapped; +extern int disable_apic_timer; /* * Define the default level of output to be very little @@ -79,8 +79,6 @@ extern void smp_local_timer_interrupt (void); extern void setup_boot_APIC_clock (void); extern void setup_secondary_APIC_clock (void); extern int APIC_init_uniprocessor (void); -extern void disable_APIC_timer(void); -extern void enable_APIC_timer(void); extern void setup_apic_routing(void); extern void setup_APIC_extended_lvt(unsigned char lvt_off, unsigned char vector, @@ -95,10 +93,6 @@ extern int apic_is_clustered_box(void); #define K8_APIC_EXT_INT_MSG_EXT 0x7 #define K8_APIC_EXT_LVT_ENTRY_THRESHOLD 0 -void smp_send_timer_broadcast_ipi(void); -void switch_APIC_timer_to_ipi(void *cpumask); -void switch_ipi_to_APIC_timer(void *cpumask); - #define ARCH_APICTIMER_STOPS_ON_C3 1 extern unsigned boot_cpu_id; diff --git a/include/asm-x86/geode.h b/include/asm-x86/geode.h index 6da4bbb..d948988 100644 --- a/include/asm-x86/geode.h +++ b/include/asm-x86/geode.h @@ -156,4 +156,54 @@ static inline int is_geode(void) return (is_geode_gx() || is_geode_lx()); } +/* MFGPTs */ + +#define MFGPT_MAX_TIMERS 8 +#define MFGPT_TIMER_ANY -1 + +#define MFGPT_DOMAIN_WORKING 1 +#define MFGPT_DOMAIN_STANDBY 2 +#define MFGPT_DOMAIN_ANY (MFGPT_DOMAIN_WORKING | MFGPT_DOMAIN_STANDBY) + +#define MFGPT_CMP1 0 +#define MFGPT_CMP2 1 + +#define MFGPT_EVENT_IRQ 0 +#define MFGPT_EVENT_NMI 1 +#define MFGPT_EVENT_RESET 3 + +#define MFGPT_REG_CMP1 0 +#define MFGPT_REG_CMP2 2 +#define MFGPT_REG_COUNTER 4 +#define MFGPT_REG_SETUP 6 + +#define MFGPT_SETUP_CNTEN (1 << 15) +#define MFGPT_SETUP_CMP2 (1 << 14) +#define MFGPT_SETUP_CMP1 (1 << 13) +#define MFGPT_SETUP_SETUP (1 << 12) +#define MFGPT_SETUP_STOPEN (1 << 11) +#define MFGPT_SETUP_EXTEN (1 << 10) +#define MFGPT_SETUP_REVEN (1 << 5) +#define MFGPT_SETUP_CLKSEL (1 << 4) + +static inline void geode_mfgpt_write(int timer, u16 reg, u16 value) +{ + u32 base = geode_get_dev_base(GEODE_DEV_MFGPT); + outw(value, base + reg + (timer * 8)); +} + +static inline u16 geode_mfgpt_read(int timer, u16 reg) +{ + u32 base = geode_get_dev_base(GEODE_DEV_MFGPT); + return inw(base + reg + (timer * 8)); +} + +extern int __init geode_mfgpt_detect(void); +extern int geode_mfgpt_toggle_event(int timer, int cmp, int event, int enable); +extern int geode_mfgpt_set_irq(int timer, int cmp, int irq, int enable); +extern int geode_mfgpt_alloc_timer(int timer, int domain, struct module *owner); + +#define geode_mfgpt_setup_irq(t, c, i) geode_mfgpt_set_irq((t), (c), (i), 1) +#define geode_mfgpt_release_irq(t, c, i) geode_mfgpt_set_irq((t), (c), (i), 0) + #endif diff --git a/include/asm-x86/hardirq_32.h b/include/asm-x86/hardirq_32.h index 0e358dc..3464958 100644 --- a/include/asm-x86/hardirq_32.h +++ b/include/asm-x86/hardirq_32.h @@ -9,6 +9,7 @@ typedef struct { unsigned long idle_timestamp; unsigned int __nmi_count; /* arch dependent */ unsigned int apic_timer_irqs; /* arch dependent */ + unsigned int irq0_irqs; } ____cacheline_aligned irq_cpustat_t; DECLARE_PER_CPU(irq_cpustat_t, irq_stat); diff --git a/include/asm-x86/hpet.h b/include/asm-x86/hpet.h index 9eff486..d4ab6db 100644 --- a/include/asm-x86/hpet.h +++ b/include/asm-x86/hpet.h @@ -1,5 +1,93 @@ -#ifdef CONFIG_X86_32 -# include "hpet_32.h" +#ifndef ASM_X86_HPET_H +#define ASM_X86_HPET_H + +#ifdef CONFIG_HPET_TIMER + +/* + * Documentation on HPET can be found at: + * http://www.intel.com/ial/home/sp/pcmmspec.htm + * ftp://download.intel.com/ial/home/sp/mmts098.pdf + */ + +#define HPET_MMAP_SIZE 1024 + +#define HPET_ID 0x000 +#define HPET_PERIOD 0x004 +#define HPET_CFG 0x010 +#define HPET_STATUS 0x020 +#define HPET_COUNTER 0x0f0 +#define HPET_T0_CFG 0x100 +#define HPET_T0_CMP 0x108 +#define HPET_T0_ROUTE 0x110 +#define HPET_T1_CFG 0x120 +#define HPET_T1_CMP 0x128 +#define HPET_T1_ROUTE 0x130 +#define HPET_T2_CFG 0x140 +#define HPET_T2_CMP 0x148 +#define HPET_T2_ROUTE 0x150 + +#define HPET_ID_REV 0x000000ff +#define HPET_ID_NUMBER 0x00001f00 +#define HPET_ID_64BIT 0x00002000 +#define HPET_ID_LEGSUP 0x00008000 +#define HPET_ID_VENDOR 0xffff0000 +#define HPET_ID_NUMBER_SHIFT 8 +#define HPET_ID_VENDOR_SHIFT 16 + +#define HPET_ID_VENDOR_8086 0x8086 + +#define HPET_CFG_ENABLE 0x001 +#define HPET_CFG_LEGACY 0x002 +#define HPET_LEGACY_8254 2 +#define HPET_LEGACY_RTC 8 + +#define HPET_TN_LEVEL 0x0002 +#define HPET_TN_ENABLE 0x0004 +#define HPET_TN_PERIODIC 0x0008 +#define HPET_TN_PERIODIC_CAP 0x0010 +#define HPET_TN_64BIT_CAP 0x0020 +#define HPET_TN_SETVAL 0x0040 +#define HPET_TN_32BIT 0x0100 +#define HPET_TN_ROUTE 0x3e00 +#define HPET_TN_FSB 0x4000 +#define HPET_TN_FSB_CAP 0x8000 +#define HPET_TN_ROUTE_SHIFT 9 + +/* Max HPET Period is 10^8 femto sec as in HPET spec */ +#define HPET_MAX_PERIOD 100000000UL +/* + * Min HPET period is 10^5 femto sec just for safety. If it is less than this, + * then 32 bit HPET counter wrapsaround in less than 0.5 sec. + */ +#define HPET_MIN_PERIOD 100000UL + +/* hpet memory map physical address */ +extern unsigned long hpet_address; +extern unsigned long force_hpet_address; +extern int is_hpet_enabled(void); +extern int hpet_enable(void); +extern unsigned long hpet_readl(unsigned long a); +extern void force_hpet_resume(void); + +#ifdef CONFIG_HPET_EMULATE_RTC + +#include <linux/interrupt.h> + +extern int hpet_mask_rtc_irq_bit(unsigned long bit_mask); +extern int hpet_set_rtc_irq_bit(unsigned long bit_mask); +extern int hpet_set_alarm_time(unsigned char hrs, unsigned char min, + unsigned char sec); +extern int hpet_set_periodic_freq(unsigned long freq); +extern int hpet_rtc_dropped_irq(void); +extern int hpet_rtc_timer_init(void); +extern irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id); + +#endif /* CONFIG_HPET_EMULATE_RTC */ + #else -# include "hpet_64.h" -#endif + +static inline int hpet_enable(void) { return 0; } +static inline unsigned long hpet_readl(unsigned long a) { return 0; } + +#endif /* CONFIG_HPET_TIMER */ +#endif /* ASM_X86_HPET_H */ diff --git a/include/asm-x86/hpet_32.h b/include/asm-x86/hpet_32.h deleted file mode 100644 index c82dc7e..0000000 --- a/include/asm-x86/hpet_32.h +++ /dev/null @@ -1,90 +0,0 @@ - -#ifndef _I386_HPET_H -#define _I386_HPET_H - -#ifdef CONFIG_HPET_TIMER - -/* - * Documentation on HPET can be found at: - * http://www.intel.com/ial/home/sp/pcmmspec.htm - * ftp://download.intel.com/ial/home/sp/mmts098.pdf - */ - -#define HPET_MMAP_SIZE 1024 - -#define HPET_ID 0x000 -#define HPET_PERIOD 0x004 -#define HPET_CFG 0x010 -#define HPET_STATUS 0x020 -#define HPET_COUNTER 0x0f0 -#define HPET_T0_CFG 0x100 -#define HPET_T0_CMP 0x108 -#define HPET_T0_ROUTE 0x110 -#define HPET_T1_CFG 0x120 -#define HPET_T1_CMP 0x128 -#define HPET_T1_ROUTE 0x130 -#define HPET_T2_CFG 0x140 -#define HPET_T2_CMP 0x148 -#define HPET_T2_ROUTE 0x150 - -#define HPET_ID_REV 0x000000ff -#define HPET_ID_NUMBER 0x00001f00 -#define HPET_ID_64BIT 0x00002000 -#define HPET_ID_LEGSUP 0x00008000 -#define HPET_ID_VENDOR 0xffff0000 -#define HPET_ID_NUMBER_SHIFT 8 -#define HPET_ID_VENDOR_SHIFT 16 - -#define HPET_ID_VENDOR_8086 0x8086 - -#define HPET_CFG_ENABLE 0x001 -#define HPET_CFG_LEGACY 0x002 -#define HPET_LEGACY_8254 2 -#define HPET_LEGACY_RTC 8 - -#define HPET_TN_LEVEL 0x0002 -#define HPET_TN_ENABLE 0x0004 -#define HPET_TN_PERIODIC 0x0008 -#define HPET_TN_PERIODIC_CAP 0x0010 -#define HPET_TN_64BIT_CAP 0x0020 -#define HPET_TN_SETVAL 0x0040 -#define HPET_TN_32BIT 0x0100 -#define HPET_TN_ROUTE 0x3e00 -#define HPET_TN_FSB 0x4000 -#define HPET_TN_FSB_CAP 0x8000 -#define HPET_TN_ROUTE_SHIFT 9 - -/* Max HPET Period is 10^8 femto sec as in HPET spec */ -#define HPET_MAX_PERIOD 100000000UL -/* - * Min HPET period is 10^5 femto sec just for safety. If it is less than this, - * then 32 bit HPET counter wrapsaround in less than 0.5 sec. - */ -#define HPET_MIN_PERIOD 100000UL - -/* hpet memory map physical address */ -extern unsigned long hpet_address; -extern int is_hpet_enabled(void); -extern int hpet_enable(void); - -#ifdef CONFIG_HPET_EMULATE_RTC - -#include <linux/interrupt.h> - -extern int hpet_mask_rtc_irq_bit(unsigned long bit_mask); -extern int hpet_set_rtc_irq_bit(unsigned long bit_mask); -extern int hpet_set_alarm_time(unsigned char hrs, unsigned char min, - unsigned char sec); -extern int hpet_set_periodic_freq(unsigned long freq); -extern int hpet_rtc_dropped_irq(void); -extern int hpet_rtc_timer_init(void); -extern irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id); - -#endif /* CONFIG_HPET_EMULATE_RTC */ - -#else - -static inline int hpet_enable(void) { return 0; } - -#endif /* CONFIG_HPET_TIMER */ -#endif /* _I386_HPET_H */ diff --git a/include/asm-x86/hpet_64.h b/include/asm-x86/hpet_64.h deleted file mode 100644 index fd4deca..0000000 --- a/include/asm-x86/hpet_64.h +++ /dev/null @@ -1,18 +0,0 @@ -#ifndef _ASM_X8664_HPET_H -#define _ASM_X8664_HPET_H 1 - -#include <asm/hpet_32.h> - -#define HPET_TICK_RATE (HZ * 100000UL) - -extern int hpet_rtc_timer_init(void); -extern int hpet_arch_init(void); -extern int hpet_timer_stop_set_go(unsigned long tick); -extern int hpet_reenable(void); -extern unsigned int hpet_calibrate_tsc(void); - -extern int hpet_use_timer; -extern unsigned long hpet_period; -extern unsigned long hpet_tick; - -#endif diff --git a/include/asm-x86/i8253.h b/include/asm-x86/i8253.h index b2a4f99..747548e 100644 --- a/include/asm-x86/i8253.h +++ b/include/asm-x86/i8253.h @@ -1,5 +1,15 @@ -#ifdef CONFIG_X86_32 -# include "i8253_32.h" -#else -# include "i8253_64.h" -#endif +#ifndef __ASM_I8253_H__ +#define __ASM_I8253_H__ + +/* i8253A PIT registers */ +#define PIT_MODE 0x43 +#define PIT_CH0 0x40 +#define PIT_CH2 0x42 + +extern spinlock_t i8253_lock; + +extern struct clock_event_device *global_clock_event; + +extern void setup_pit_timer(void); + +#endif /* __ASM_I8253_H__ */ diff --git a/include/asm-x86/i8253_32.h b/include/asm-x86/i8253_32.h deleted file mode 100644 index 7577d05..0000000 --- a/include/asm-x86/i8253_32.h +++ /dev/null @@ -1,17 +0,0 @@ -#ifndef __ASM_I8253_H__ -#define __ASM_I8253_H__ - -#include <linux/clockchips.h> - -/* i8253A PIT registers */ -#define PIT_MODE 0x43 -#define PIT_CH0 0x40 -#define PIT_CH2 0x42 - -extern spinlock_t i8253_lock; - -extern struct clock_event_device *global_clock_event; - -extern void setup_pit_timer(void); - -#endif /* __ASM_I8253_H__ */ diff --git a/include/asm-x86/i8253_64.h b/include/asm-x86/i8253_64.h deleted file mode 100644 index 015d8df..0000000 --- a/include/asm-x86/i8253_64.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_I8253_H__ -#define __ASM_I8253_H__ - -extern spinlock_t i8253_lock; - -#endif /* __ASM_I8253_H__ */ diff --git a/include/asm-x86/pda.h b/include/asm-x86/pda.h index 5642634..fb49f80 100644 --- a/include/asm-x86/pda.h +++ b/include/asm-x86/pda.h @@ -29,6 +29,7 @@ struct x8664_pda { short isidle; struct mm_struct *active_mm; unsigned apic_timer_irqs; + unsigned irq0_irqs; } ____cacheline_aligned_in_smp; extern struct x8664_pda *_cpu_pda[]; diff --git a/include/asm-x86/proto.h b/include/asm-x86/proto.h index 31f20ad..c44a3a9 100644 --- a/include/asm-x86/proto.h +++ b/include/asm-x86/proto.h @@ -51,9 +51,6 @@ extern void reserve_bootmem_generic(unsigned long phys, unsigned len); extern void load_gs_index(unsigned gs); -extern void stop_timer_interrupt(void); -extern void main_timer_handler(void); - extern unsigned long end_pfn_map; extern void show_trace(struct task_struct *, struct pt_regs *, unsigned long * rsp); @@ -90,14 +87,10 @@ extern int timer_over_8254; extern int gsi_irq_sharing(int gsi); -extern void smp_local_timer_interrupt(void); - extern int force_mwait; long do_arch_prctl(struct task_struct *task, int code, unsigned long addr); -void i8254_timer_resume(void); - #define round_up(x,y) (((x) + (y) - 1) & ~((y)-1)) #define round_down(x,y) ((x) & ~((y)-1)) diff --git a/include/asm-x86/timex.h b/include/asm-x86/timex.h index d01c18c..39a21ab 100644 --- a/include/asm-x86/timex.h +++ b/include/asm-x86/timex.h @@ -1,5 +1,18 @@ -#ifdef CONFIG_X86_32 -# include "timex_32.h" +/* x86 architecture timex specifications */ +#ifndef _ASM_X86_TIMEX_H +#define _ASM_X86_TIMEX_H + +#include <asm/processor.h> +#include <asm/tsc.h> + +#ifdef CONFIG_X86_ELAN +# define PIT_TICK_RATE 1189200 /* AMD Elan has different frequency! */ #else -# include "timex_64.h" +# define PIT_TICK_RATE 1193182 /* Underlying HZ */ +#endif +#define CLOCK_TICK_RATE PIT_TICK_RATE + +extern int read_current_timer(unsigned long *timer_value); +#define ARCH_HAS_READ_CURRENT_TIMER 1 + #endif diff --git a/include/asm-x86/timex_32.h b/include/asm-x86/timex_32.h deleted file mode 100644 index 3666044..0000000 --- a/include/asm-x86/timex_32.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * linux/include/asm-i386/timex.h - * - * i386 architecture timex specifications - */ -#ifndef _ASMi386_TIMEX_H -#define _ASMi386_TIMEX_H - -#include <asm/processor.h> -#include <asm/tsc.h> - -#ifdef CONFIG_X86_ELAN -# define CLOCK_TICK_RATE 1189200 /* AMD Elan has different frequency! */ -#else -# define CLOCK_TICK_RATE 1193182 /* Underlying HZ */ -#endif - - -extern int read_current_timer(unsigned long *timer_value); -#define ARCH_HAS_READ_CURRENT_TIMER 1 - -#endif diff --git a/include/asm-x86/timex_64.h b/include/asm-x86/timex_64.h deleted file mode 100644 index 6ed21f4..0000000 --- a/include/asm-x86/timex_64.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * linux/include/asm-x86_64/timex.h - * - * x86-64 architecture timex specifications - */ -#ifndef _ASMx8664_TIMEX_H -#define _ASMx8664_TIMEX_H - -#include <asm/8253pit.h> -#include <asm/msr.h> -#include <asm/vsyscall.h> -#include <asm/system.h> -#include <asm/processor.h> -#include <asm/tsc.h> -#include <linux/compiler.h> - -#define CLOCK_TICK_RATE PIT_TICK_RATE /* Underlying HZ */ - -extern int read_current_timer(unsigned long *timer_value); -#define ARCH_HAS_READ_CURRENT_TIMER 1 - -#define USEC_PER_TICK (USEC_PER_SEC / HZ) -#define NSEC_PER_TICK (NSEC_PER_SEC / HZ) -#define FSEC_PER_TICK (FSEC_PER_SEC / HZ) - -#define NS_SCALE 10 /* 2^10, carefully chosen */ -#define US_SCALE 32 /* 2^32, arbitralrily chosen */ - -extern void mark_tsc_unstable(char *msg); -extern void set_cyc2ns_scale(unsigned long khz); -#endif diff --git a/include/asm-x86/tsc.h b/include/asm-x86/tsc.h index a4d8066..6baab30 100644 --- a/include/asm-x86/tsc.h +++ b/include/asm-x86/tsc.h @@ -1,13 +1,14 @@ /* - * linux/include/asm-i386/tsc.h - * - * i386 TSC related functions + * x86 TSC related functions */ -#ifndef _ASM_i386_TSC_H -#define _ASM_i386_TSC_H +#ifndef _ASM_X86_TSC_H +#define _ASM_X86_TSC_H #include <asm/processor.h> +#define NS_SCALE 10 /* 2^10, carefully chosen */ +#define US_SCALE 32 /* 2^32, arbitralrily chosen */ + /* * Standard way to access the cycle counter. */ @@ -72,4 +73,8 @@ int check_tsc_unstable(void); extern void check_tsc_sync_source(int cpu); extern void check_tsc_sync_target(void); +#ifdef CONFIG_X86_64 +extern void tsc_calibrate(void); +#endif + #endif diff --git a/include/asm-x86/vsyscall.h b/include/asm-x86/vsyscall.h index 3b8ceb4..f01c49f 100644 --- a/include/asm-x86/vsyscall.h +++ b/include/asm-x86/vsyscall.h @@ -29,9 +29,6 @@ enum vsyscall_num { #define VGETCPU_RDTSCP 1 #define VGETCPU_LSL 2 -#define hpet_readl(a) readl((const void __iomem *)fix_to_virt(FIX_HPET_BASE) + a) -#define hpet_writel(d,a) writel(d, (void __iomem *)fix_to_virt(FIX_HPET_BASE) + a) - extern int __vgetcpu_mode; extern volatile unsigned long __jiffies; diff --git a/include/linux/clockchips.h b/include/linux/clockchips.h index def5a65..d2ddea9 100644 --- a/include/linux/clockchips.h +++ b/include/linux/clockchips.h @@ -8,7 +8,7 @@ #ifndef _LINUX_CLOCKCHIPS_H #define _LINUX_CLOCKCHIPS_H -#ifdef CONFIG_GENERIC_CLOCKEVENTS +#ifdef CONFIG_GENERIC_CLOCKEVENTS_BUILD #include <linux/clocksource.h> #include <linux/cpumask.h> @@ -126,11 +126,14 @@ extern int clockevents_register_notifier(struct notifier_block *nb); extern int clockevents_program_event(struct clock_event_device *dev, ktime_t expires, ktime_t now); +#ifdef CONFIG_GENERIC_CLOCKEVENTS extern void clockevents_notify(unsigned long reason, void *arg); - #else +# define clockevents_notify(reason, arg) do { } while (0) +#endif + +#else /* CONFIG_GENERIC_CLOCKEVENTS_BUILD */ -static inline void clockevents_resume_events(void) { } #define clockevents_notify(reason, arg) do { } while (0) #endif diff --git a/include/linux/jiffies.h b/include/linux/jiffies.h index c080f61..d7a5e03 100644 --- a/include/linux/jiffies.h +++ b/include/linux/jiffies.h @@ -36,8 +36,6 @@ /* LATCH is used in the interval timer and ftape setup. */ #define LATCH ((CLOCK_TICK_RATE + HZ/2) / HZ) /* For divider */ -#define LATCH_HPET ((HPET_TICK_RATE + HZ/2) / HZ) - /* Suppose we want to devide two numbers NOM and DEN: NOM/DEN, the we can * improve accuracy by shifting LSH bits, hence calculating: * (NOM << LSH) / DEN @@ -53,13 +51,9 @@ /* HZ is the requested value. ACTHZ is actual HZ ("<< 8" is for accuracy) */ #define ACTHZ (SH_DIV (CLOCK_TICK_RATE, LATCH, 8)) -#define ACTHZ_HPET (SH_DIV (HPET_TICK_RATE, LATCH_HPET, 8)) - /* TICK_NSEC is the time between ticks in nsec assuming real ACTHZ */ #define TICK_NSEC (SH_DIV (1000000UL * 1000, ACTHZ, 8)) -#define TICK_NSEC_HPET (SH_DIV(1000000UL * 1000, ACTHZ_HPET, 8)) - /* TICK_USEC is the time between ticks in usec assuming fake USER_HZ */ #define TICK_USEC ((1000000UL + USER_HZ/2) / USER_HZ) diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 3948708..584741b 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2242,6 +2242,7 @@ #define PCI_DEVICE_ID_INTEL_82801EB_5 0x24d5 #define PCI_DEVICE_ID_INTEL_82801EB_6 0x24d6 #define PCI_DEVICE_ID_INTEL_82801EB_11 0x24db +#define PCI_DEVICE_ID_INTEL_82801EB_12 0x24dc #define PCI_DEVICE_ID_INTEL_82801EB_13 0x24dd #define PCI_DEVICE_ID_INTEL_ESB_1 0x25a1 #define PCI_DEVICE_ID_INTEL_ESB_2 0x25a2 diff --git a/kernel/time/Kconfig b/kernel/time/Kconfig index f663511..8d53106 100644 --- a/kernel/time/Kconfig +++ b/kernel/time/Kconfig @@ -23,3 +23,8 @@ config HIGH_RES_TIMERS hardware is not capable then this option only increases the size of the kernel image. +config GENERIC_CLOCKEVENTS_BUILD + bool + default y + depends on GENERIC_CLOCKEVENTS || GENERIC_CLOCKEVENTS_MIGR + diff --git a/kernel/time/Makefile b/kernel/time/Makefile index 99b6034..905b0b5 100644 --- a/kernel/time/Makefile +++ b/kernel/time/Makefile @@ -1,6 +1,6 @@ obj-y += timekeeping.o ntp.o clocksource.o jiffies.o timer_list.o -obj-$(CONFIG_GENERIC_CLOCKEVENTS) += clockevents.o +obj-$(CONFIG_GENERIC_CLOCKEVENTS_BUILD) += clockevents.o obj-$(CONFIG_GENERIC_CLOCKEVENTS) += tick-common.o obj-$(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) += tick-broadcast.o obj-$(CONFIG_TICK_ONESHOT) += tick-oneshot.o diff --git a/kernel/time/clockevents.c b/kernel/time/clockevents.c index 41dd310..822beeb 100644 --- a/kernel/time/clockevents.c +++ b/kernel/time/clockevents.c @@ -194,6 +194,7 @@ void clockevents_exchange_device(struct clock_event_device *old, local_irq_restore(flags); } +#ifdef CONFIG_GENERIC_CLOCKEVENTS /** * clockevents_notify - notification about relevant events */ @@ -222,4 +223,4 @@ void clockevents_notify(unsigned long reason, void *arg) spin_unlock(&clockevents_lock); } EXPORT_SYMBOL_GPL(clockevents_notify); - +#endif diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c index 0962e05..298bc7c 100644 --- a/kernel/time/tick-broadcast.c +++ b/kernel/time/tick-broadcast.c @@ -64,8 +64,9 @@ static void tick_broadcast_start_periodic(struct clock_event_device *bc) */ int tick_check_broadcast_device(struct clock_event_device *dev) { - if (tick_broadcast_device.evtdev || - (dev->features & CLOCK_EVT_FEAT_C3STOP)) + if ((tick_broadcast_device.evtdev && + tick_broadcast_device.evtdev->rating >= dev->rating) || + (dev->features & CLOCK_EVT_FEAT_C3STOP)) return 0; clockevents_exchange_device(NULL, dev); @@ -176,8 +177,6 @@ static void tick_do_periodic_broadcast(void) */ static void tick_handle_periodic_broadcast(struct clock_event_device *dev) { - dev->next_event.tv64 = KTIME_MAX; - tick_do_periodic_broadcast(); /* @@ -515,11 +514,9 @@ static void tick_broadcast_clear_oneshot(int cpu) */ void tick_broadcast_setup_oneshot(struct clock_event_device *bc) { - if (bc->mode != CLOCK_EVT_MODE_ONESHOT) { - bc->event_handler = tick_handle_oneshot_broadcast; - clockevents_set_mode(bc, CLOCK_EVT_MODE_ONESHOT); - bc->next_event.tv64 = KTIME_MAX; - } + bc->event_handler = tick_handle_oneshot_broadcast; + clockevents_set_mode(bc, CLOCK_EVT_MODE_ONESHOT); + bc->next_event.tv64 = KTIME_MAX; } /* diff --git a/kernel/time/tick-common.c b/kernel/time/tick-common.c index 77a21ab..3f3ae39 100644 --- a/kernel/time/tick-common.c +++ b/kernel/time/tick-common.c @@ -200,7 +200,7 @@ static int tick_check_new_device(struct clock_event_device *newdev) cpu = smp_processor_id(); if (!cpu_isset(cpu, newdev->cpumask)) - goto out; + goto out_bc; td = &per_cpu(tick_cpu_device, cpu); curdev = td->evtdev; @@ -265,7 +265,7 @@ out_bc: */ if (tick_check_broadcast_device(newdev)) ret = NOTIFY_STOP; -out: + spin_unlock_irqrestore(&tick_device_lock, flags); return ret; |