summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--arch/arm/Kconfig4
-rw-r--r--arch/arm/mach-at91/Kconfig3
-rw-r--r--arch/arm/mach-at91/Makefile1
-rw-r--r--arch/arm/mach-at91/Makefile.boot7
-rw-r--r--arch/arm/mach-at91/at91cap9.c365
-rw-r--r--arch/arm/mach-at91/at91cap9_devices.c1066
-rw-r--r--arch/arm/mach-at91/clock.c2
-rw-r--r--arch/arm/mach-at91/generic.h2
-rw-r--r--arch/arm/mach-at91/pm.c5
-rw-r--r--arch/arm/mm/Kconfig4
-rw-r--r--drivers/net/Kconfig2
-rw-r--r--drivers/usb/gadget/Kconfig2
-rw-r--r--drivers/video/Kconfig2
-rw-r--r--drivers/video/atmel_lcdfb.c2
-rw-r--r--include/asm-arm/arch-at91/at91_pmc.h7
-rw-r--r--include/asm-arm/arch-at91/at91cap9.h121
-rw-r--r--include/asm-arm/arch-at91/at91cap9_matrix.h132
-rw-r--r--include/asm-arm/arch-at91/at91sam9263_matrix.h2
-rw-r--r--include/asm-arm/arch-at91/at91sam9rl_matrix.h2
-rw-r--r--include/asm-arm/arch-at91/board.h2
-rw-r--r--include/asm-arm/arch-at91/cpu.h9
-rw-r--r--include/asm-arm/arch-at91/hardware.h2
-rw-r--r--include/asm-arm/arch-at91/timex.h5
-rw-r--r--include/asm-avr32/arch-at32ap/cpu.h1
24 files changed, 1735 insertions, 15 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 93e40b6..0bd479c 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -180,8 +180,8 @@ config ARCH_AT91
bool "Atmel AT91"
select GENERIC_GPIO
help
- This enables support for systems based on the Atmel AT91RM9200
- and AT91SAM9xxx processors.
+ This enables support for systems based on the Atmel AT91RM9200,
+ AT91SAM9 and AT91CAP9 processors.
config ARCH_CLPS7500
bool "Cirrus CL-PS7500FE"
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 214733e..d12c616 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -22,6 +22,9 @@ config ARCH_AT91SAM9263
config ARCH_AT91SAM9RL
bool "AT91SAM9RL"
+config ARCH_AT91CAP9
+ bool "AT91CAP9"
+
config ARCH_AT91X40
bool "AT91x40"
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 529ffb5..10413c5 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260.o at91sam926x_time.o at91sam9260_d
obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o
obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_devices.o
obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o
+obj-$(CONFIG_ARCH_AT91CAP9) += at91cap9.o at91sam926x_time.o at91cap9_devices.o
obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o
# AT91RM9200 board-specific support
diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
index e667dcc..071a250 100644
--- a/arch/arm/mach-at91/Makefile.boot
+++ b/arch/arm/mach-at91/Makefile.boot
@@ -3,7 +3,12 @@
# PARAMS_PHYS must be within 4MB of ZRELADDR
# INITRD_PHYS must be in RAM
+ifeq ($(CONFIG_ARCH_AT91CAP9),y)
+ zreladdr-y := 0x70008000
+params_phys-y := 0x70000100
+initrd_phys-y := 0x70410000
+else
zreladdr-y := 0x20008000
params_phys-y := 0x20000100
initrd_phys-y := 0x20410000
-
+endif
diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c
new file mode 100644
index 0000000..48d27d8
--- /dev/null
+++ b/arch/arm/mach-at91/at91cap9.c
@@ -0,0 +1,365 @@
+/*
+ * arch/arm/mach-at91/at91cap9.c
+ *
+ * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
+ * Copyright (C) 2007 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/arch/at91cap9.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+
+#include "generic.h"
+#include "clock.h"
+
+static struct map_desc at91cap9_io_desc[] __initdata = {
+ {
+ .virtual = AT91_VA_BASE_SYS,
+ .pfn = __phys_to_pfn(AT91_BASE_SYS),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = AT91_IO_VIRT_BASE - AT91CAP9_SRAM_SIZE,
+ .pfn = __phys_to_pfn(AT91CAP9_SRAM_BASE),
+ .length = AT91CAP9_SRAM_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+/* --------------------------------------------------------------------
+ * Clocks
+ * -------------------------------------------------------------------- */
+
+/*
+ * The peripheral clocks.
+ */
+static struct clk pioABCD_clk = {
+ .name = "pioABCD_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_PIOABCD,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mpb0_clk = {
+ .name = "mpb0_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_MPB0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mpb1_clk = {
+ .name = "mpb1_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_MPB1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mpb2_clk = {
+ .name = "mpb2_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_MPB2,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mpb3_clk = {
+ .name = "mpb3_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_MPB3,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mpb4_clk = {
+ .name = "mpb4_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_MPB4,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart0_clk = {
+ .name = "usart0_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_US0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart1_clk = {
+ .name = "usart1_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_US1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart2_clk = {
+ .name = "usart2_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_US2,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc0_clk = {
+ .name = "mci0_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_MCI0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc1_clk = {
+ .name = "mci1_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_MCI1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk can_clk = {
+ .name = "can_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_CAN,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi_clk = {
+ .name = "twi_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_TWI,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi0_clk = {
+ .name = "spi0_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_SPI0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi1_clk = {
+ .name = "spi1_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_SPI1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc0_clk = {
+ .name = "ssc0_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_SSC0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc1_clk = {
+ .name = "ssc1_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_SSC1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ac97_clk = {
+ .name = "ac97_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_AC97C,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk tcb_clk = {
+ .name = "tcb_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_TCB,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pwmc_clk = {
+ .name = "pwmc_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_PWMC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk macb_clk = {
+ .name = "macb_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_EMAC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk aestdes_clk = {
+ .name = "aestdes_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_AESTDES,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk adc_clk = {
+ .name = "adc_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_ADC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk isi_clk = {
+ .name = "isi_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_ISI,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk lcdc_clk = {
+ .name = "lcdc_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_LCDC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk dma_clk = {
+ .name = "dma_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_DMA,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk udphs_clk = {
+ .name = "udphs_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_UDPHS,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ohci_clk = {
+ .name = "ohci_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_UHP,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+
+static struct clk *periph_clocks[] __initdata = {
+ &pioABCD_clk,
+ &mpb0_clk,
+ &mpb1_clk,
+ &mpb2_clk,
+ &mpb3_clk,
+ &mpb4_clk,
+ &usart0_clk,
+ &usart1_clk,
+ &usart2_clk,
+ &mmc0_clk,
+ &mmc1_clk,
+ &can_clk,
+ &twi_clk,
+ &spi0_clk,
+ &spi1_clk,
+ &ssc0_clk,
+ &ssc1_clk,
+ &ac97_clk,
+ &tcb_clk,
+ &pwmc_clk,
+ &macb_clk,
+ &aestdes_clk,
+ &adc_clk,
+ &isi_clk,
+ &lcdc_clk,
+ &dma_clk,
+ &udphs_clk,
+ &ohci_clk,
+ // irq0 .. irq1
+};
+
+/*
+ * The four programmable clocks.
+ * You must configure pin multiplexing to bring these signals out.
+ */
+static struct clk pck0 = {
+ .name = "pck0",
+ .pmc_mask = AT91_PMC_PCK0,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 0,
+};
+static struct clk pck1 = {
+ .name = "pck1",
+ .pmc_mask = AT91_PMC_PCK1,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 1,
+};
+static struct clk pck2 = {
+ .name = "pck2",
+ .pmc_mask = AT91_PMC_PCK2,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 2,
+};
+static struct clk pck3 = {
+ .name = "pck3",
+ .pmc_mask = AT91_PMC_PCK3,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 3,
+};
+
+static void __init at91cap9_register_clocks(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
+ clk_register(periph_clocks[i]);
+
+ clk_register(&pck0);
+ clk_register(&pck1);
+ clk_register(&pck2);
+ clk_register(&pck3);
+}
+
+/* --------------------------------------------------------------------
+ * GPIO
+ * -------------------------------------------------------------------- */
+
+static struct at91_gpio_bank at91cap9_gpio[] = {
+ {
+ .id = AT91CAP9_ID_PIOABCD,
+ .offset = AT91_PIOA,
+ .clock = &pioABCD_clk,
+ }, {
+ .id = AT91CAP9_ID_PIOABCD,
+ .offset = AT91_PIOB,
+ .clock = &pioABCD_clk,
+ }, {
+ .id = AT91CAP9_ID_PIOABCD,
+ .offset = AT91_PIOC,
+ .clock = &pioABCD_clk,
+ }, {
+ .id = AT91CAP9_ID_PIOABCD,
+ .offset = AT91_PIOD,
+ .clock = &pioABCD_clk,
+ }
+};
+
+static void at91cap9_reset(void)
+{
+ at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
+}
+
+/* --------------------------------------------------------------------
+ * AT91CAP9 processor initialization
+ * -------------------------------------------------------------------- */
+
+void __init at91cap9_initialize(unsigned long main_clock)
+{
+ /* Map peripherals */
+ iotable_init(at91cap9_io_desc, ARRAY_SIZE(at91cap9_io_desc));
+
+ at91_arch_reset = at91cap9_reset;
+ at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1);
+
+ /* Init clock subsystem */
+ at91_clock_init(main_clock);
+
+ /* Register the processor-specific clocks */
+ at91cap9_register_clocks();
+
+ /* Register GPIO subsystem */
+ at91_gpio_init(at91cap9_gpio, 4);
+}
+
+/* --------------------------------------------------------------------
+ * Interrupt initialization
+ * -------------------------------------------------------------------- */
+
+/*
+ * The default interrupt priority levels (0 = lowest, 7 = highest).
+ */
+static unsigned int at91cap9_default_irq_priority[NR_AIC_IRQS] __initdata = {
+ 7, /* Advanced Interrupt Controller (FIQ) */
+ 7, /* System Peripherals */
+ 1, /* Parallel IO Controller A, B, C and D */
+ 0, /* MP Block Peripheral 0 */
+ 0, /* MP Block Peripheral 1 */
+ 0, /* MP Block Peripheral 2 */
+ 0, /* MP Block Peripheral 3 */
+ 0, /* MP Block Peripheral 4 */
+ 5, /* USART 0 */
+ 5, /* USART 1 */
+ 5, /* USART 2 */
+ 0, /* Multimedia Card Interface 0 */
+ 0, /* Multimedia Card Interface 1 */
+ 3, /* CAN */
+ 6, /* Two-Wire Interface */
+ 5, /* Serial Peripheral Interface 0 */
+ 5, /* Serial Peripheral Interface 1 */
+ 4, /* Serial Synchronous Controller 0 */
+ 4, /* Serial Synchronous Controller 1 */
+ 5, /* AC97 Controller */
+ 0, /* Timer Counter 0, 1 and 2 */
+ 0, /* Pulse Width Modulation Controller */
+ 3, /* Ethernet */
+ 0, /* Advanced Encryption Standard, Triple DES*/
+ 0, /* Analog-to-Digital Converter */
+ 0, /* Image Sensor Interface */
+ 3, /* LCD Controller */
+ 0, /* DMA Controller */
+ 2, /* USB Device Port */
+ 2, /* USB Host port */
+ 0, /* Advanced Interrupt Controller (IRQ0) */
+ 0, /* Advanced Interrupt Controller (IRQ1) */
+};
+
+void __init at91cap9_init_interrupts(unsigned int priority[NR_AIC_IRQS])
+{
+ if (!priority)
+ priority = at91cap9_default_irq_priority;
+
+ /* Initialize the AIC interrupt controller */
+ at91_aic_init(priority);
+
+ /* Enable GPIO interrupts */
+ at91_gpio_irq_setup();
+}
diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
new file mode 100644
index 0000000..c50fad9
--- /dev/null
+++ b/arch/arm/mach-at91/at91cap9_devices.c
@@ -0,0 +1,1066 @@
+/*
+ * arch/arm/mach-at91/at91cap9_devices.c
+ *
+ * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
+ * Copyright (C) 2007 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+
+#include <video/atmel_lcdc.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91cap9.h>
+#include <asm/arch/at91sam926x_mc.h>
+#include <asm/arch/at91cap9_matrix.h>
+
+#include "generic.h"
+
+
+/* --------------------------------------------------------------------
+ * USB Host
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static u64 ohci_dmamask = DMA_BIT_MASK(32);
+static struct at91_usbh_data usbh_data;
+
+static struct resource usbh_resources[] = {
+ [0] = {
+ .start = AT91CAP9_UHP_BASE,
+ .end = AT91CAP9_UHP_BASE + SZ_1M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_ID_UHP,
+ .end = AT91CAP9_ID_UHP,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91_usbh_device = {
+ .name = "at91_ohci",
+ .id = -1,
+ .dev = {
+ .dma_mask = &ohci_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &usbh_data,
+ },
+ .resource = usbh_resources,
+ .num_resources = ARRAY_SIZE(usbh_resources),
+};
+
+void __init at91_add_device_usbh(struct at91_usbh_data *data)
+{
+ int i;
+
+ if (!data)
+ return;
+
+ /* Enable VBus control for UHP ports */
+ for (i = 0; i < data->ports; i++) {
+ if (data->vbus_pin[i])
+ at91_set_gpio_output(data->vbus_pin[i], 0);
+ }
+
+ usbh_data = *data;
+ platform_device_register(&at91_usbh_device);
+}
+#else
+void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * Ethernet
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
+static u64 eth_dmamask = DMA_BIT_MASK(32);
+static struct at91_eth_data eth_data;
+
+static struct resource eth_resources[] = {
+ [0] = {
+ .start = AT91CAP9_BASE_EMAC,
+ .end = AT91CAP9_BASE_EMAC + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_ID_EMAC,
+ .end = AT91CAP9_ID_EMAC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91cap9_eth_device = {
+ .name = "macb",
+ .id = -1,
+ .dev = {
+ .dma_mask = &eth_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &eth_data,
+ },
+ .resource = eth_resources,
+ .num_resources = ARRAY_SIZE(eth_resources),
+};
+
+void __init at91_add_device_eth(struct at91_eth_data *data)
+{
+ if (!data)
+ return;
+
+ if (data->phy_irq_pin) {
+ at91_set_gpio_input(data->phy_irq_pin, 0);
+ at91_set_deglitch(data->phy_irq_pin, 1);
+ }
+
+ /* Pins used for MII and RMII */
+ at91_set_A_periph(AT91_PIN_PB21, 0); /* ETXCK_EREFCK */
+ at91_set_A_periph(AT91_PIN_PB22, 0); /* ERXDV */
+ at91_set_A_periph(AT91_PIN_PB25, 0); /* ERX0 */
+ at91_set_A_periph(AT91_PIN_PB26, 0); /* ERX1 */
+ at91_set_A_periph(AT91_PIN_PB27, 0); /* ERXER */
+ at91_set_A_periph(AT91_PIN_PB28, 0); /* ETXEN */
+ at91_set_A_periph(AT91_PIN_PB23, 0); /* ETX0 */
+ at91_set_A_periph(AT91_PIN_PB24, 0); /* ETX1 */
+ at91_set_A_periph(AT91_PIN_PB30, 0); /* EMDIO */
+ at91_set_A_periph(AT91_PIN_PB29, 0); /* EMDC */
+
+ if (!data->is_rmii) {
+ at91_set_B_periph(AT91_PIN_PC25, 0); /* ECRS */
+ at91_set_B_periph(AT91_PIN_PC26, 0); /* ECOL */
+ at91_set_B_periph(AT91_PIN_PC22, 0); /* ERX2 */
+ at91_set_B_periph(AT91_PIN_PC23, 0); /* ERX3 */
+ at91_set_B_periph(AT91_PIN_PC27, 0); /* ERXCK */
+ at91_set_B_periph(AT91_PIN_PC20, 0); /* ETX2 */
+ at91_set_B_periph(AT91_PIN_PC21, 0); /* ETX3 */
+ at91_set_B_periph(AT91_PIN_PC24, 0); /* ETXER */
+ }
+
+ eth_data = *data;
+ platform_device_register(&at91cap9_eth_device);
+}
+#else
+void __init at91_add_device_eth(struct at91_eth_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * MMC / SD
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+static u64 mmc_dmamask = DMA_BIT_MASK(32);
+static struct at91_mmc_data mmc0_data, mmc1_data;
+
+static struct resource mmc0_resources[] = {
+ [0] = {
+ .start = AT91CAP9_BASE_MCI0,
+ .end = AT91CAP9_BASE_MCI0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_ID_MCI0,
+ .end = AT91CAP9_ID_MCI0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91cap9_mmc0_device = {
+ .name = "at91_mci",
+ .id = 0,
+ .dev = {
+ .dma_mask = &mmc_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &mmc0_data,
+ },
+ .resource = mmc0_resources,
+ .num_resources = ARRAY_SIZE(mmc0_resources),
+};
+
+static struct resource mmc1_resources[] = {
+ [0] = {
+ .start = AT91CAP9_BASE_MCI1,
+ .end = AT91CAP9_BASE_MCI1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_ID_MCI1,
+ .end = AT91CAP9_ID_MCI1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91cap9_mmc1_device = {
+ .name = "at91_mci",
+ .id = 1,
+ .dev = {
+ .dma_mask = &mmc_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &mmc1_data,
+ },
+ .resource = mmc1_resources,
+ .num_resources = ARRAY_SIZE(mmc1_resources),
+};
+
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
+{
+ if (!data)
+ return;
+
+ /* input/irq */
+ if (data->det_pin) {
+ at91_set_gpio_input(data->det_pin, 1);
+ at91_set_deglitch(data->det_pin, 1);
+ }
+ if (data->wp_pin)
+ at91_set_gpio_input(data->wp_pin, 1);
+ if (data->vcc_pin)
+ at91_set_gpio_output(data->vcc_pin, 0);
+
+ if (mmc_id == 0) { /* MCI0 */
+ /* CLK */
+ at91_set_A_periph(AT91_PIN_PA2, 0);
+
+ /* CMD */
+ at91_set_A_periph(AT91_PIN_PA1, 1);
+
+ /* DAT0, maybe DAT1..DAT3 */
+ at91_set_A_periph(AT91_PIN_PA0, 1);
+ if (data->wire4) {
+ at91_set_A_periph(AT91_PIN_PA3, 1);
+ at91_set_A_periph(AT91_PIN_PA4, 1);
+ at91_set_A_periph(AT91_PIN_PA5, 1);
+ }
+
+ mmc0_data = *data;
+ at91_clock_associate("mci0_clk", &at91cap9_mmc1_device.dev, "mci_clk");
+ platform_device_register(&at91cap9_mmc0_device);
+ } else { /* MCI1 */
+ /* CLK */
+ at91_set_A_periph(AT91_PIN_PA16, 0);
+
+ /* CMD */
+ at91_set_A_periph(AT91_PIN_PA17, 1);
+
+ /* DAT0, maybe DAT1..DAT3 */
+ at91_set_A_periph(AT91_PIN_PA18, 1);
+ if (data->wire4) {
+ at91_set_A_periph(AT91_PIN_PA19, 1);
+ at91_set_A_periph(AT91_PIN_PA20, 1);
+ at91_set_A_periph(AT91_PIN_PA21, 1);
+ }
+
+ mmc1_data = *data;
+ at91_clock_associate("mci1_clk", &at91cap9_mmc1_device.dev, "mci_clk");
+ platform_device_register(&at91cap9_mmc1_device);
+ }
+}
+#else
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * NAND / SmartMedia
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
+static struct at91_nand_data nand_data;
+
+#define NAND_BASE AT91_CHIPSELECT_3
+
+static struct resource nand_resources[] = {
+ {
+ .start = NAND_BASE,
+ .end = NAND_BASE + SZ_256M - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device at91cap9_nand_device = {
+ .name = "at91_nand",
+ .id = -1,
+ .dev = {
+ .platform_data = &nand_data,
+ },
+ .resource = nand_resources,
+ .num_resources = ARRAY_SIZE(nand_resources),
+};
+
+void __init at91_add_device_nand(struct at91_nand_data *data)
+{
+ unsigned long csa, mode;
+
+ if (!data)
+ return;
+
+ csa = at91_sys_read(AT91_MATRIX_EBICSA);
+ at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA | AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
+
+ /* set the bus interface characteristics */
+ at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(1)
+ | AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(1));
+
+ at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(6)
+ | AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(6));
+
+ at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(8) | AT91_SMC_NRDCYCLE_(8));
+
+ if (data->bus_width_16)
+ mode = AT91_SMC_DBW_16;
+ else
+ mode = AT91_SMC_DBW_8;
+ at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(1));
+
+ /* enable pin */
+ if (data->enable_pin)
+ at91_set_gpio_output(data->enable_pin, 1);
+
+ /* ready/busy pin */
+ if (data->rdy_pin)
+ at91_set_gpio_input(data->rdy_pin, 1);
+
+ /* card detect pin */
+ if (data->det_pin)
+ at91_set_gpio_input(data->det_pin, 1);
+
+ nand_data = *data;
+ platform_device_register(&at91cap9_nand_device);
+}
+#else
+void __init at91_add_device_nand(struct at91_nand_data *data) {}
+#endif
+
+/* --------------------------------------------------------------------
+ * TWI (i2c)
+ * -------------------------------------------------------------------- */
+
+/*
+ * Prefer the GPIO code since the TWI controller isn't robust
+ * (gets overruns and underruns under load) and can only issue
+ * repeated STARTs in one scenario (the driver doesn't yet handle them).
+ */
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+
+static struct i2c_gpio_platform_data pdata = {
+ .sda_pin = AT91_PIN_PB4,
+ .sda_is_open_drain = 1,
+ .scl_pin = AT91_PIN_PB5,
+ .scl_is_open_drain = 1,
+ .udelay = 2, /* ~100 kHz */
+};
+
+static struct platform_device at91cap9_twi_device = {
+ .name = "i2c-gpio",
+ .id = -1,
+ .dev.platform_data = &pdata,
+};
+
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
+{
+ at91_set_GPIO_periph(AT91_PIN_PB4, 1); /* TWD (SDA) */
+ at91_set_multi_drive(AT91_PIN_PB4, 1);
+
+ at91_set_GPIO_periph(AT91_PIN_PB5, 1); /* TWCK (SCL) */
+ at91_set_multi_drive(AT91_PIN_PB5, 1);
+
+ i2c_register_board_info(0, devices, nr_devices);
+ platform_device_register(&at91cap9_twi_device);
+}
+
+#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
+
+static struct resource twi_resources[] = {
+ [0] = {
+ .start = AT91CAP9_BASE_TWI,
+ .end = AT91CAP9_BASE_TWI + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_ID_TWI,
+ .end = AT91CAP9_ID_TWI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91cap9_twi_device = {
+ .name = "at91_i2c",
+ .id = -1,
+ .resource = twi_resources,
+ .num_resources = ARRAY_SIZE(twi_resources),
+};
+
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
+{
+ /* pins used for TWI interface */
+ at91_set_B_periph(AT91_PIN_PB4, 0); /* TWD */
+ at91_set_multi_drive(AT91_PIN_PB4, 1);
+
+ at91_set_B_periph(AT91_PIN_PB5, 0); /* TWCK */
+ at91_set_multi_drive(AT91_PIN_PB5, 1);
+
+ i2c_register_board_info(0, devices, nr_devices);
+ platform_device_register(&at91cap9_twi_device);
+}
+#else
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
+#endif
+
+/* --------------------------------------------------------------------
+ * SPI
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
+static u64 spi_dmamask = DMA_BIT_MASK(32);
+
+static struct resource spi0_resources[] = {
+ [0] = {
+ .start = AT91CAP9_BASE_SPI0,
+ .end = AT91CAP9_BASE_SPI0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_ID_SPI0,
+ .end = AT91CAP9_ID_SPI0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91cap9_spi0_device = {
+ .name = "atmel_spi",
+ .id = 0,
+ .dev = {
+ .dma_mask = &spi_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = spi0_resources,
+ .num_resources = ARRAY_SIZE(spi0_resources),
+};
+
+static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA5, AT91_PIN_PA3, AT91_PIN_PD0, AT91_PIN_PD1 };
+
+static struct resource spi1_resources[] = {
+ [0] = {
+ .start = AT91CAP9_BASE_SPI1,
+ .end = AT91CAP9_BASE_SPI1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_ID_SPI1,
+ .end = AT91CAP9_ID_SPI1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91cap9_spi1_device = {
+ .name = "atmel_spi",
+ .id = 1,
+ .dev = {
+ .dma_mask = &spi_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = spi1_resources,
+ .num_resources = ARRAY_SIZE(spi1_resources),
+};
+
+static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB15, AT91_PIN_PB16, AT91_PIN_PB17, AT91_PIN_PB18 };
+
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
+{
+ int i;
+ unsigned long cs_pin;
+ short enable_spi0 = 0;
+ short enable_spi1 = 0;
+
+ /* Choose SPI chip-selects */
+ for (i = 0; i < nr_devices; i++) {
+ if (devices[i].controller_data)
+ cs_pin = (unsigned long) devices[i].controller_data;
+ else if (devices[i].bus_num == 0)
+ cs_pin = spi0_standard_cs[devices[i].chip_select];
+ else
+ cs_pin = spi1_standard_cs[devices[i].chip_select];
+
+ if (devices[i].bus_num == 0)
+ enable_spi0 = 1;
+ else
+ enable_spi1 = 1;
+
+ /* enable chip-select pin */
+ at91_set_gpio_output(cs_pin, 1);
+
+ /* pass chip-select pin to driver */
+ devices[i].controller_data = (void *) cs_pin;
+ }
+
+ spi_register_board_info(devices, nr_devices);
+
+ /* Configure SPI bus(es) */
+ if (enable_spi0) {
+ at91_set_B_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
+ at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
+ at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
+
+ at91_clock_associate("spi0_clk", &at91cap9_spi0_device.dev, "spi_clk");
+ platform_device_register(&at91cap9_spi0_device);
+ }
+ if (enable_spi1) {
+ at91_set_A_periph(AT91_PIN_PB12, 0); /* SPI1_MISO */
+ at91_set_A_periph(AT91_PIN_PB13, 0); /* SPI1_MOSI */
+ at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_SPCK */
+
+ at91_clock_associate("spi1_clk", &at91cap9_spi1_device.dev, "spi_clk");
+ platform_device_register(&at91cap9_spi1_device);
+ }
+}
+#else
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * RTT
+ * -------------------------------------------------------------------- */
+
+static struct platform_device at91cap9_rtt_device = {
+ .name = "at91_rtt",
+ .id = -1,
+ .num_resources = 0,
+};
+
+static void __init at91_add_device_rtt(void)
+{
+ platform_device_register(&at91cap9_rtt_device);
+}
+
+
+/* --------------------------------------------------------------------
+ * Watchdog
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+static struct platform_device at91cap9_wdt_device = {
+ .name = "at91_wdt",
+ .id = -1,
+ .num_resources = 0,
+};
+
+static void __init at91_add_device_watchdog(void)
+{
+ platform_device_register(&at91cap9_wdt_device);
+}
+#else
+static void __init at91_add_device_watchdog(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * AC97
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SND_AT91_AC97) || defined(CONFIG_SND_AT91_AC97_MODULE)
+static u64 ac97_dmamask = DMA_BIT_MASK(32);
+static struct atmel_ac97_data ac97_data;
+
+static struct resource ac97_resources[] = {
+ [0] = {
+ .start = AT91CAP9_BASE_AC97C,
+ .end = AT91CAP9_BASE_AC97C + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_ID_AC97C,
+ .end = AT91CAP9_ID_AC97C,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91cap9_ac97_device = {
+ .name = "ac97c",
+ .id = 1,
+ .dev = {
+ .dma_mask = &ac97_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &ac97_data,
+ },
+ .resource = ac97_resources,
+ .num_resources = ARRAY_SIZE(ac97_resources),
+};
+
+void __init at91_add_device_ac97(struct atmel_ac97_data *data)
+{
+ if (!data)
+ return;
+
+ at91_set_A_periph(AT91_PIN_PA6, 0); /* AC97FS */
+ at91_set_A_periph(AT91_PIN_PA7, 0); /* AC97CK */
+ at91_set_A_periph(AT91_PIN_PA8, 0); /* AC97TX */
+ at91_set_A_periph(AT91_PIN_PA9, 0); /* AC97RX */
+
+ /* reset */
+ if (data->reset_pin)
+ at91_set_gpio_output(data->reset_pin, 0);
+
+ ac97_data = *data;
+ platform_device_register(&at91cap9_ac97_device);
+}
+#else
+void __init at91_add_device_ac97(struct atmel_ac97_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * LCD Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
+static u64 lcdc_dmamask = DMA_BIT_MASK(32);
+static struct atmel_lcdfb_info lcdc_data;
+
+static struct resource lcdc_resources[] = {
+ [0] = {
+ .start = AT91CAP9_LCDC_BASE,
+ .end = AT91CAP9_LCDC_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_ID_LCDC,
+ .end = AT91CAP9_ID_LCDC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91_lcdc_device = {
+ .name = "atmel_lcdfb",
+ .id = 0,
+ .dev = {
+ .dma_mask = &lcdc_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &lcdc_data,
+ },
+ .resource = lcdc_resources,
+ .num_resources = ARRAY_SIZE(lcdc_resources),
+};
+
+void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
+{
+ if (!data)
+ return;
+
+ at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */
+ at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */
+ at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */
+ at91_set_B_periph(AT91_PIN_PB9, 0); /* LCDCC */
+ at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDD2 */
+ at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDD3 */
+ at91_set_A_periph(AT91_PIN_PC8, 0); /* LCDD4 */
+ at91_set_A_periph(AT91_PIN_PC9, 0); /* LCDD5 */
+ at91_set_A_periph(AT91_PIN_PC10, 0); /* LCDD6 */
+ at91_set_A_periph(AT91_PIN_PC11, 0); /* LCDD7 */
+ at91_set_A_periph(AT91_PIN_PC14, 0); /* LCDD10 */
+ at91_set_A_periph(AT91_PIN_PC15, 0); /* LCDD11 */
+ at91_set_A_periph(AT91_PIN_PC16, 0); /* LCDD12 */
+ at91_set_A_periph(AT91_PIN_PC17, 0); /* LCDD13 */
+ at91_set_A_periph(AT91_PIN_PC18, 0); /* LCDD14 */
+ at91_set_A_periph(AT91_PIN_PC19, 0); /* LCDD15 */
+ at91_set_A_periph(AT91_PIN_PC22, 0); /* LCDD18 */
+ at91_set_A_periph(AT91_PIN_PC23, 0); /* LCDD19 */
+ at91_set_A_periph(AT91_PIN_PC24, 0); /* LCDD20 */
+ at91_set_A_periph(AT91_PIN_PC25, 0); /* LCDD21 */
+ at91_set_A_periph(AT91_PIN_PC26, 0); /* LCDD22 */
+ at91_set_A_periph(AT91_PIN_PC27, 0); /* LCDD23 */
+
+ lcdc_data = *data;
+ platform_device_register(&at91_lcdc_device);
+}
+#else
+void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * SSC -- Synchronous Serial Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
+static u64 ssc0_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ssc0_resources[] = {
+ [0] = {
+ .start = AT91CAP9_BASE_SSC0,
+ .end = AT91CAP9_BASE_SSC0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_ID_SSC0,
+ .end = AT91CAP9_ID_SSC0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91cap9_ssc0_device = {
+ .name = "ssc",
+ .id = 0,
+ .dev = {
+ .dma_mask = &ssc0_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = ssc0_resources,
+ .num_resources = ARRAY_SIZE(ssc0_resources),
+};
+
+static inline void configure_ssc0_pins(unsigned pins)
+{
+ if (pins & ATMEL_SSC_TF)
+ at91_set_A_periph(AT91_PIN_PB0, 1);
+ if (pins & ATMEL_SSC_TK)
+ at91_set_A_periph(AT91_PIN_PB1, 1);
+ if (pins & ATMEL_SSC_TD)
+ at91_set_A_periph(AT91_PIN_PB2, 1);
+ if (pins & ATMEL_SSC_RD)
+ at91_set_A_periph(AT91_PIN_PB3, 1);
+ if (pins & ATMEL_SSC_RK)
+ at91_set_A_periph(AT91_PIN_PB4, 1);
+ if (pins & ATMEL_SSC_RF)
+ at91_set_A_periph(AT91_PIN_PB5, 1);
+}
+
+static u64 ssc1_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ssc1_resources[] = {
+ [0] = {
+ .start = AT91CAP9_BASE_SSC1,
+ .end = AT91CAP9_BASE_SSC1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_ID_SSC1,
+ .end = AT91CAP9_ID_SSC1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91cap9_ssc1_device = {
+ .name = "ssc",
+ .id = 1,
+ .dev = {
+ .dma_mask = &ssc1_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = ssc1_resources,
+ .num_resources = ARRAY_SIZE(ssc1_resources),
+};
+
+static inline void configure_ssc1_pins(unsigned pins)
+{
+ if (pins & ATMEL_SSC_TF)
+ at91_set_A_periph(AT91_PIN_PB6, 1);
+ if (pins & ATMEL_SSC_TK)
+ at91_set_A_periph(AT91_PIN_PB7, 1);
+ if (pins & ATMEL_SSC_TD)
+ at91_set_A_periph(AT91_PIN_PB8, 1);
+ if (pins & ATMEL_SSC_RD)
+ at91_set_A_periph(AT91_PIN_PB9, 1);
+ if (pins & ATMEL_SSC_RK)
+ at91_set_A_periph(AT91_PIN_PB10, 1);
+ if (pins & ATMEL_SSC_RF)
+ at91_set_A_periph(AT91_PIN_PB11, 1);
+}
+
+/*
+ * SSC controllers are accessed through library code, instead of any
+ * kind of all-singing/all-dancing driver. For example one could be
+ * used by a particular I2S audio codec's driver, while another one
+ * on the same system might be used by a custom data capture driver.
+ */
+void __init at91_add_device_ssc(unsigned id, unsigned pins)
+{
+ struct platform_device *pdev;
+
+ /*
+ * NOTE: caller is responsible for passing information matching
+ * "pins" to whatever will be using each particular controller.
+ */
+ switch (id) {
+ case AT91CAP9_ID_SSC0:
+ pdev = &at91cap9_ssc0_device;
+ configure_ssc0_pins(pins);
+ at91_clock_associate("ssc0_clk", &pdev->dev, "ssc");
+ break;
+ case AT91CAP9_ID_SSC1:
+ pdev = &at91cap9_ssc1_device;
+ configure_ssc1_pins(pins);
+ at91_clock_associate("ssc1_clk", &pdev->dev, "ssc");
+ break;
+ default:
+ return;
+ }
+
+ platform_device_register(pdev);
+}
+
+#else
+void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * UART
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SERIAL_ATMEL)
+static struct resource dbgu_resources[] = {
+ [0] = {
+ .start = AT91_VA_BASE_SYS + AT91_DBGU,
+ .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91_ID_SYS,
+ .end = AT91_ID_SYS,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data dbgu_data = {
+ .use_dma_tx = 0,
+ .use_dma_rx = 0, /* DBGU not capable of receive DMA */
+ .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
+};
+
+static u64 dbgu_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91cap9_dbgu_device = {
+ .name = "atmel_usart",
+ .id = 0,
+ .dev = {
+ .dma_mask = &dbgu_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &dbgu_data,
+ },
+ .resource = dbgu_resources,
+ .num_resources = ARRAY_SIZE(dbgu_resources),
+};
+
+static inline void configure_dbgu_pins(void)
+{
+ at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */
+ at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */
+}
+
+static struct resource uart0_resources[] = {
+ [0] = {
+ .start = AT91CAP9_BASE_US0,
+ .end = AT91CAP9_BASE_US0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_ID_US0,
+ .end = AT91CAP9_ID_US0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart0_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static u64 uart0_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91cap9_uart0_device = {
+ .name = "atmel_usart",
+ .id = 1,
+ .dev = {
+ .dma_mask = &uart0_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart0_data,
+ },
+ .resource = uart0_resources,
+ .num_resources = ARRAY_SIZE(uart0_resources),
+};
+
+static inline void configure_usart0_pins(unsigned pins)
+{
+ at91_set_A_periph(AT91_PIN_PA22, 1); /* TXD0 */
+ at91_set_A_periph(AT91_PIN_PA23, 0); /* RXD0 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_A_periph(AT91_PIN_PA24, 0); /* RTS0 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_A_periph(AT91_PIN_PA25, 0); /* CTS0 */
+}
+
+static struct resource uart1_resources[] = {
+ [0] = {
+ .start = AT91CAP9_BASE_US1,
+ .end = AT91CAP9_BASE_US1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_ID_US1,
+ .end = AT91CAP9_ID_US1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart1_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static u64 uart1_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91cap9_uart1_device = {
+ .name = "atmel_usart",
+ .id = 2,
+ .dev = {
+ .dma_mask = &uart1_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart1_data,
+ },
+ .resource = uart1_resources,
+ .num_resources = ARRAY_SIZE(uart1_resources),
+};
+
+static inline void configure_usart1_pins(unsigned pins)
+{
+ at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */
+ at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_B_periph(AT91_PIN_PD7, 0); /* RTS1 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_B_periph(AT91_PIN_PD8, 0); /* CTS1 */
+}
+
+static struct resource uart2_resources[] = {
+ [0] = {
+ .start = AT91CAP9_BASE_US2,
+ .end = AT91CAP9_BASE_US2 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_ID_US2,
+ .end = AT91CAP9_ID_US2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart2_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static u64 uart2_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91cap9_uart2_device = {
+ .name = "atmel_usart",
+ .id = 3,
+ .dev = {
+ .dma_mask = &uart2_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart2_data,
+ },
+ .resource = uart2_resources,
+ .num_resources = ARRAY_SIZE(uart2_resources),
+};
+
+static inline void configure_usart2_pins(unsigned pins)
+{
+ at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */
+ at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_B_periph(AT91_PIN_PD5, 0); /* RTS2 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */
+}
+
+static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
+struct platform_device *atmel_default_console_device; /* the serial console device */
+
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
+{
+ struct platform_device *pdev;
+
+ switch (id) {
+ case 0: /* DBGU */
+ pdev = &at91cap9_dbgu_device;
+ configure_dbgu_pins();
+ at91_clock_associate("mck", &pdev->dev, "usart");
+ break;
+ case AT91CAP9_ID_US0:
+ pdev = &at91cap9_uart0_device;
+ configure_usart0_pins(pins);
+ at91_clock_associate("usart0_clk", &pdev->dev, "usart");
+ break;
+ case AT91CAP9_ID_US1:
+ pdev = &at91cap9_uart1_device;
+ configure_usart1_pins(pins);
+ at91_clock_associate("usart1_clk", &pdev->dev, "usart");
+ break;
+ case AT91CAP9_ID_US2:
+ pdev = &at91cap9_uart2_device;
+ configure_usart2_pins(pins);
+ at91_clock_associate("usart2_clk", &pdev->dev, "usart");
+ break;
+ default:
+ return;
+ }
+ pdev->id = portnr; /* update to mapped ID */
+
+ if (portnr < ATMEL_MAX_UART)
+ at91_uarts[portnr] = pdev;
+}
+
+void __init at91_set_serial_console(unsigned portnr)
+{
+ if (portnr < ATMEL_MAX_UART)
+ atmel_default_console_device = at91_uarts[portnr];
+ if (!atmel_default_console_device)
+ printk(KERN_INFO "AT91: No default serial console defined.\n");
+}
+
+void __init at91_add_device_serial(void)
+{
+ int i;
+
+ for (i = 0; i < ATMEL_MAX_UART; i++) {
+ if (at91_uarts[i])
+ platform_device_register(at91_uarts[i]);
+ }
+}
+#else
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
+void __init at91_set_serial_console(unsigned portnr) {}
+void __init at91_add_device_serial(void) {}
+#endif
+
+
+/* -------------------------------------------------------------------- */
+/*
+ * These devices are always present and don't need any board-specific
+ * setup.
+ */
+static int __init at91_add_standard_devices(void)
+{
+ at91_add_device_rtt();
+ at91_add_device_watchdog();
+ return 0;
+}
+
+arch_initcall(at91_add_standard_devices);
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index 57c3b64..ec76eea 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -574,6 +574,8 @@ int __init at91_clock_init(unsigned long main_clock)
} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263()) {
uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
udpck.pmc_mask = AT91SAM926x_PMC_UDP;
+ } else if (cpu_is_at91cap9()) {
+ uhpck.pmc_mask = AT91CAP9_PMC_UHP;
}
at91_sys_write(AT91_CKGR_PLLBR, 0);
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index 77d4c0a3..b5daf7f 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -15,6 +15,7 @@ extern void __init at91sam9261_initialize(unsigned long main_clock);
extern void __init at91sam9263_initialize(unsigned long main_clock);
extern void __init at91sam9rl_initialize(unsigned long main_clock);
extern void __init at91x40_initialize(unsigned long main_clock);
+extern void __init at91cap9_initialize(unsigned long main_clock);
/* Interrupts */
extern void __init at91rm9200_init_interrupts(unsigned int priority[]);
@@ -23,6 +24,7 @@ extern void __init at91sam9261_init_interrupts(unsigned int priority[]);
extern void __init at91sam9263_init_interrupts(unsigned int priority[]);
extern void __init at91sam9rl_init_interrupts(unsigned int priority[]);
extern void __init at91x40_init_interrupts(unsigned int priority[]);
+extern void __init at91cap9_init_interrupts(unsigned int priority[]);
extern void __init at91_aic_init(unsigned int priority[]);
/* Timer */
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 98cb614..4b120cc 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -80,6 +80,11 @@ static int at91_pm_verify_clocks(void)
pr_debug("AT91: PM - Suspend-to-RAM with USB still active\n");
return 0;
}
+ } else if (cpu_is_at91cap9()) {
+ if ((scsr & AT91CAP9_PMC_UHP) != 0) {
+ pr_debug("AT91: PM - Suspend-to-RAM with USB still active\n");
+ return 0;
+ }
}
#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 7868f4d..1bf2a7b 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -171,8 +171,8 @@ config CPU_ARM925T
# ARM926T
config CPU_ARM926T
bool "Support ARM926T processor"
- depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_NS9XXX || ARCH_DAVINCI
- default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_NS9XXX || ARCH_DAVINCI
+ depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || ARCH_NS9XXX || ARCH_DAVINCI
+ default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || ARCH_NS9XXX || ARCH_DAVINCI
select CPU_32v5
select CPU_ABRT_EV5TJ
select CPU_CACHE_VIVT
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 9af05a2..a672866 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -212,7 +212,7 @@ config MII
config MACB
tristate "Atmel MACB support"
- depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263
+ depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263 || ARCH_AT91CAP9
select PHYLIB
help
The Atmel MACB ethernet interface is found on many AT32 and AT91
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index f81d08d..77a3759 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -308,7 +308,7 @@ config USB_S3C2410_DEBUG
config USB_GADGET_AT91
boolean "AT91 USB Device Port"
- depends on ARCH_AT91 && !ARCH_AT91SAM9RL
+ depends on ARCH_AT91 && !ARCH_AT91SAM9RL && !ARCH_AT91CAP9
select USB_GADGET_SELECTED
help
Many Atmel AT91 processors (such as the AT91RM2000) have a
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 5b3dbcf..758435f 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -889,7 +889,7 @@ config FB_S1D13XXX
config FB_ATMEL
tristate "AT91/AT32 LCD Controller support"
- depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || AVR32)
+ depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || AVR32)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index 7c30cc8..f8e7111 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -30,7 +30,7 @@
#define ATMEL_LCDC_CVAL_DEFAULT 0xc8
#define ATMEL_LCDC_DMA_BURST_LEN 8
-#if defined(CONFIG_ARCH_AT91SAM9263)
+#if defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91CAP9)
#define ATMEL_LCDC_FIFO_SIZE 2048
#else
#define ATMEL_LCDC_FIFO_SIZE 512
diff --git a/include/asm-arm/arch-at91/at91_pmc.h b/include/asm-arm/arch-at91/at91_pmc.h
index 34804ea..52cd8e5 100644
--- a/include/asm-arm/arch-at91/at91_pmc.h
+++ b/include/asm-arm/arch-at91/at91_pmc.h
@@ -25,6 +25,7 @@
#define AT91RM9200_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
#define AT91RM9200_PMC_UHP (1 << 4) /* USB Host Port Clock [AT91RM9200 only] */
#define AT91SAM926x_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91SAM926x only] */
+#define AT91CAP9_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91CAP9 only] */
#define AT91SAM926x_PMC_UDP (1 << 7) /* USB Devcice Port Clock [AT91SAM926x only] */
#define AT91_PMC_PCK0 (1 << 8) /* Programmable Clock 0 */
#define AT91_PMC_PCK1 (1 << 9) /* Programmable Clock 1 */
@@ -37,7 +38,7 @@
#define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */
#define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */
-#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [SAM9RL only] */
+#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [SAM9RL, CAP9] */
#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register [not on SAM9RL] */
#define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */
@@ -54,6 +55,10 @@
#define AT91_PMC_PLLCOUNT (0x3f << 8) /* PLL Counter */
#define AT91_PMC_OUT (3 << 14) /* PLL Clock Frequency Range */
#define AT91_PMC_MUL (0x7ff << 16) /* PLL Multiplier */
+#define AT91_PMC_USBDIV (3 << 28) /* USB Divisor (PLLB only) */
+#define AT91_PMC_USBDIV_1 (0 << 28)
+#define AT91_PMC_USBDIV_2 (1 << 28)
+#define AT91_PMC_USBDIV_4 (2 << 28)
#define AT91_PMC_USB96M (1 << 28) /* Divider by 2 Enable (PLLB only) */
#define AT91_PMC_MCKR (AT91_PMC + 0x30) /* Master Clock Register */
diff --git a/include/asm-arm/arch-at91/at91cap9.h b/include/asm-arm/arch-at91/at91cap9.h
new file mode 100644
index 0000000..73e1fcf
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91cap9.h
@@ -0,0 +1,121 @@
+/*
+ * include/asm-arm/arch-at91/at91cap9.h
+ *
+ * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
+ * Copyright (C) 2007 Atmel Corporation.
+ *
+ * Common definitions.
+ * Based on AT91CAP9 datasheet revision B (Preliminary).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91CAP9_H
+#define AT91CAP9_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS 1 /* System Peripherals */
+#define AT91CAP9_ID_PIOABCD 2 /* Parallel IO Controller A, B, C and D */
+#define AT91CAP9_ID_MPB0 3 /* MP Block Peripheral 0 */
+#define AT91CAP9_ID_MPB1 4 /* MP Block Peripheral 1 */
+#define AT91CAP9_ID_MPB2 5 /* MP Block Peripheral 2 */
+#define AT91CAP9_ID_MPB3 6 /* MP Block Peripheral 3 */
+#define AT91CAP9_ID_MPB4 7 /* MP Block Peripheral 4 */
+#define AT91CAP9_ID_US0 8 /* USART 0 */
+#define AT91CAP9_ID_US1 9 /* USART 1 */
+#define AT91CAP9_ID_US2 10 /* USART 2 */
+#define AT91CAP9_ID_MCI0 11 /* Multimedia Card Interface 0 */
+#define AT91CAP9_ID_MCI1 12 /* Multimedia Card Interface 1 */
+#define AT91CAP9_ID_CAN 13 /* CAN */
+#define AT91CAP9_ID_TWI 14 /* Two-Wire Interface */
+#define AT91CAP9_ID_SPI0 15 /* Serial Peripheral Interface 0 */
+#define AT91CAP9_ID_SPI1 16 /* Serial Peripheral Interface 0 */
+#define AT91CAP9_ID_SSC0 17 /* Serial Synchronous Controller 0 */
+#define AT91CAP9_ID_SSC1 18 /* Serial Synchronous Controller 1 */
+#define AT91CAP9_ID_AC97C 19 /* AC97 Controller */
+#define AT91CAP9_ID_TCB 20 /* Timer Counter 0, 1 and 2 */
+#define AT91CAP9_ID_PWMC 21 /* Pulse Width Modulation Controller */
+#define AT91CAP9_ID_EMAC 22 /* Ethernet */
+#define AT91CAP9_ID_AESTDES 23 /* Advanced Encryption Standard, Triple DES */
+#define AT91CAP9_ID_ADC 24 /* Analog-to-Digital Converter */
+#define AT91CAP9_ID_ISI 25 /* Image Sensor Interface */
+#define AT91CAP9_ID_LCDC 26 /* LCD Controller */
+#define AT91CAP9_ID_DMA 27 /* DMA Controller */
+#define AT91CAP9_ID_UDPHS 28 /* USB High Speed Device Port */
+#define AT91CAP9_ID_UHP 29 /* USB Host Port */
+#define AT91CAP9_ID_IRQ0 30 /* Advanced Interrupt Controller (IRQ0) */
+#define AT91CAP9_ID_IRQ1 31 /* Advanced Interrupt Controller (IRQ1) */
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91CAP9_BASE_UDPHS 0xfff78000
+#define AT91CAP9_BASE_TCB0 0xfff7c000
+#define AT91CAP9_BASE_TC0 0xfff7c000
+#define AT91CAP9_BASE_TC1 0xfff7c040
+#define AT91CAP9_BASE_TC2 0xfff7c080
+#define AT91CAP9_BASE_MCI0 0xfff80000
+#define AT91CAP9_BASE_MCI1 0xfff84000
+#define AT91CAP9_BASE_TWI 0xfff88000
+#define AT91CAP9_BASE_US0 0xfff8c000
+#define AT91CAP9_BASE_US1 0xfff90000
+#define AT91CAP9_BASE_US2 0xfff94000
+#define AT91CAP9_BASE_SSC0 0xfff98000
+#define AT91CAP9_BASE_SSC1 0xfff9c000
+#define AT91CAP9_BASE_AC97C 0xfffa0000
+#define AT91CAP9_BASE_SPI0 0xfffa4000
+#define AT91CAP9_BASE_SPI1 0xfffa8000
+#define AT91CAP9_BASE_CAN 0xfffac000
+#define AT91CAP9_BASE_PWMC 0xfffb8000
+#define AT91CAP9_BASE_EMAC 0xfffbc000
+#define AT91CAP9_BASE_ADC 0xfffc0000
+#define AT91CAP9_BASE_ISI 0xfffc4000
+#define AT91_BASE_SYS 0xffffe200
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_ECC (0xffffe200 - AT91_BASE_SYS)
+#define AT91_BCRAMC (0xffffe400 - AT91_BASE_SYS)
+#define AT91_DDRSDRC (0xffffe600 - AT91_BASE_SYS)
+#define AT91_SMC (0xffffe800 - AT91_BASE_SYS)
+#define AT91_MATRIX (0xffffea00 - AT91_BASE_SYS)
+#define AT91_CCFG (0xffffeb10 - AT91_BASE_SYS)
+#define AT91_DMA (0xffffec00 - AT91_BASE_SYS)
+#define AT91_DBGU (0xffffee00 - AT91_BASE_SYS)
+#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
+#define AT91_PIOA (0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOB (0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOC (0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOD (0xfffff800 - AT91_BASE_SYS)
+#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDC (0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
+#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS)
+
+/*
+ * Internal Memory.
+ */
+#define AT91CAP9_SRAM_BASE 0x00100000 /* Internal SRAM base address */
+#define AT91CAP9_SRAM_SIZE (32 * SZ_1K) /* Internal SRAM size (32Kb) */
+
+#define AT91CAP9_ROM_BASE 0x00400000 /* Internal ROM base address */
+#define AT91CAP9_ROM_SIZE (32 * SZ_1K) /* Internal ROM size (32Kb) */
+
+#define AT91CAP9_LCDC_BASE 0x00500000 /* LCD Controller */
+#define AT91CAP9_UDPHS_BASE 0x00600000 /* USB High Speed Device Port */
+#define AT91CAP9_UHP_BASE 0x00700000 /* USB Host controller */
+
+#define CONFIG_DRAM_BASE AT91_CHIPSELECT_6
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91cap9_matrix.h b/include/asm-arm/arch-at91/at91cap9_matrix.h
new file mode 100644
index 0000000..a641686
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91cap9_matrix.h
@@ -0,0 +1,132 @@
+/*
+ * include/asm-arm/arch-at91/at91cap9_matrix.h
+ *
+ * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
+ * Copyright (C) 2006 Atmel Corporation.
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91CAP9 datasheet revision B (Preliminary).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91CAP9_MATRIX_H
+#define AT91CAP9_MATRIX_H
+
+#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */
+#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18) /* Master Configuration Register 6 */
+#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C) /* Master Configuration Register 7 */
+#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20) /* Master Configuration Register 8 */
+#define AT91_MATRIX_MCFG9 (AT91_MATRIX + 0x24) /* Master Configuration Register 9 */
+#define AT91_MATRIX_MCFG10 (AT91_MATRIX + 0x28) /* Master Configuration Register 10 */
+#define AT91_MATRIX_MCFG11 (AT91_MATRIX + 0x2C) /* Master Configuration Register 11 */
+#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
+#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
+#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
+#define AT91_MATRIX_ULBT_FOUR (2 << 0)
+#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
+#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
+
+#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */
+#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */
+#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58) /* Slave Configuration Register 6 */
+#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C) /* Slave Configuration Register 7 */
+#define AT91_MATRIX_SCFG8 (AT91_MATRIX + 0x60) /* Slave Configuration Register 8 */
+#define AT91_MATRIX_SCFG9 (AT91_MATRIX + 0x64) /* Slave Configuration Register 9 */
+#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
+#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
+#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
+#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */
+#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
+#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
+#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
+
+#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84) /* Priority Register B for Slave 0 */
+#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C) /* Priority Register B for Slave 1 */
+#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94) /* Priority Register B for Slave 2 */
+#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C) /* Priority Register B for Slave 3 */
+#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */
+#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4) /* Priority Register B for Slave 4 */
+#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */
+#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC) /* Priority Register B for Slave 5 */
+#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0) /* Priority Register A for Slave 6 */
+#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4) /* Priority Register B for Slave 6 */
+#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8) /* Priority Register A for Slave 7 */
+#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC) /* Priority Register B for Slave 7 */
+#define AT91_MATRIX_PRAS8 (AT91_MATRIX + 0xC0) /* Priority Register A for Slave 8 */
+#define AT91_MATRIX_PRBS8 (AT91_MATRIX + 0xC4) /* Priority Register B for Slave 8 */
+#define AT91_MATRIX_PRAS9 (AT91_MATRIX + 0xC8) /* Priority Register A for Slave 9 */
+#define AT91_MATRIX_PRBS9 (AT91_MATRIX + 0xCC) /* Priority Register B for Slave 9 */
+#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
+#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
+#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
+#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
+#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
+#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
+#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */
+#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */
+#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */
+#define AT91_MATRIX_M9PR (3 << 4) /* Master 9 Priority (in Register B) */
+#define AT91_MATRIX_M10PR (3 << 8) /* Master 10 Priority (in Register B) */
+#define AT91_MATRIX_M11PR (3 << 12) /* Master 11 Priority (in Register B) */
+
+#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */
+#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+#define AT91_MATRIX_RCB2 (1 << 2)
+#define AT91_MATRIX_RCB3 (1 << 3)
+#define AT91_MATRIX_RCB4 (1 << 4)
+#define AT91_MATRIX_RCB5 (1 << 5)
+#define AT91_MATRIX_RCB6 (1 << 6)
+#define AT91_MATRIX_RCB7 (1 << 7)
+#define AT91_MATRIX_RCB8 (1 << 8)
+#define AT91_MATRIX_RCB9 (1 << 9)
+#define AT91_MATRIX_RCB10 (1 << 10)
+#define AT91_MATRIX_RCB11 (1 << 11)
+
+#define AT91_MPBS0_SFR (AT91_MATRIX + 0x114) /* MPBlock Slave 0 Special Function Register */
+#define AT91_MPBS1_SFR (AT91_MATRIX + 0x11C) /* MPBlock Slave 1 Special Function Register */
+
+#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI Chip Select Assignment Register */
+#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */
+#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1)
+#define AT91_MATRIX_EBI_CS1A_BCRAMC (1 << 1)
+#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */
+#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3)
+#define AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA (1 << 3)
+#define AT91_MATRIX_EBI_CS4A (1 << 4) /* Chip Select 4 Assignment */
+#define AT91_MATRIX_EBI_CS4A_SMC (0 << 4)
+#define AT91_MATRIX_EBI_CS4A_SMC_CF1 (1 << 4)
+#define AT91_MATRIX_EBI_CS5A (1 << 5) /* Chip Select 5 Assignment */
+#define AT91_MATRIX_EBI_CS5A_SMC (0 << 5)
+#define AT91_MATRIX_EBI_CS5A_SMC_CF2 (1 << 5)
+#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
+#define AT91_MATRIX_EBI_DQSPDC (1 << 9) /* Data Qualifier Strobe Pull-Down Configuration */
+#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */
+#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16)
+#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16)
+
+#define AT91_MPBS2_SFR (AT91_MATRIX + 0x12C) /* MPBlock Slave 2 Special Function Register */
+#define AT91_MPBS3_SFR (AT91_MATRIX + 0x130) /* MPBlock Slave 3 Special Function Register */
+#define AT91_APB_SFR (AT91_MATRIX + 0x134) /* APB Bridge Special Function Register */
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91sam9263_matrix.h b/include/asm-arm/arch-at91/at91sam9263_matrix.h
index 6fc6e4b..72f6e66 100644
--- a/include/asm-arm/arch-at91/at91sam9263_matrix.h
+++ b/include/asm-arm/arch-at91/at91sam9263_matrix.h
@@ -44,7 +44,7 @@
#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
-#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */
+#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */
#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
diff --git a/include/asm-arm/arch-at91/at91sam9rl_matrix.h b/include/asm-arm/arch-at91/at91sam9rl_matrix.h
index b15f11b..8422417 100644
--- a/include/asm-arm/arch-at91/at91sam9rl_matrix.h
+++ b/include/asm-arm/arch-at91/at91sam9rl_matrix.h
@@ -38,7 +38,7 @@
#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
-#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */
+#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */
#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
diff --git a/include/asm-arm/arch-at91/board.h b/include/asm-arm/arch-at91/board.h
index e88ad86..55b07bd 100644
--- a/include/asm-arm/arch-at91/board.h
+++ b/include/asm-arm/arch-at91/board.h
@@ -72,7 +72,7 @@ struct at91_eth_data {
};
extern void __init at91_add_device_eth(struct at91_eth_data *data);
-#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263)
+#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91CAP9)
#define eth_platform_data at91_eth_data
#endif
diff --git a/include/asm-arm/arch-at91/cpu.h b/include/asm-arm/arch-at91/cpu.h
index 080cbb4..7145166 100644
--- a/include/asm-arm/arch-at91/cpu.h
+++ b/include/asm-arm/arch-at91/cpu.h
@@ -21,13 +21,13 @@
#define ARCH_ID_AT91SAM9260 0x019803a0
#define ARCH_ID_AT91SAM9261 0x019703a0
#define ARCH_ID_AT91SAM9263 0x019607a0
+#define ARCH_ID_AT91SAM9RL64 0x019b03a0
+#define ARCH_ID_AT91CAP9 0x039A03A0
#define ARCH_ID_AT91SAM9XE128 0x329973a0
#define ARCH_ID_AT91SAM9XE256 0x329a93a0
#define ARCH_ID_AT91SAM9XE512 0x329aa3a0
-#define ARCH_ID_AT91SAM9RL64 0x019b03a0
-
#define ARCH_ID_AT91M40800 0x14080044
#define ARCH_ID_AT91R40807 0x44080746
#define ARCH_ID_AT91M40807 0x14080745
@@ -81,6 +81,11 @@ static inline unsigned long at91_arch_identify(void)
#define cpu_is_at91sam9rl() (0)
#endif
+#ifdef CONFIG_ARCH_AT91CAP9
+#define cpu_is_at91cap9() (at91_cpu_identify() == ARCH_ID_AT91CAP9)
+#else
+#define cpu_is_at91cap9() (0)
+#endif
/*
* Since this is ARM, we will never run on any AVR32 CPU. But these
diff --git a/include/asm-arm/arch-at91/hardware.h b/include/asm-arm/arch-at91/hardware.h
index 8f1cdd3..2c826d82 100644
--- a/include/asm-arm/arch-at91/hardware.h
+++ b/include/asm-arm/arch-at91/hardware.h
@@ -26,6 +26,8 @@
#include <asm/arch/at91sam9263.h>
#elif defined(CONFIG_ARCH_AT91SAM9RL)
#include <asm/arch/at91sam9rl.h>
+#elif defined(CONFIG_ARCH_AT91CAP9)
+#include <asm/arch/at91cap9.h>
#elif defined(CONFIG_ARCH_AT91X40)
#include <asm/arch/at91x40.h>
#else
diff --git a/include/asm-arm/arch-at91/timex.h b/include/asm-arm/arch-at91/timex.h
index a310698..f1933b0 100644
--- a/include/asm-arm/arch-at91/timex.h
+++ b/include/asm-arm/arch-at91/timex.h
@@ -42,6 +42,11 @@
#define AT91SAM9_MASTER_CLOCK 100000000
#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
+#elif defined(CONFIG_ARCH_AT91CAP9)
+
+#define AT91CAP9_MASTER_CLOCK 100000000
+#define CLOCK_TICK_RATE (AT91CAP9_MASTER_CLOCK/16)
+
#elif defined(CONFIG_ARCH_AT91X40)
#define AT91X40_MASTER_CLOCK 40000000
diff --git a/include/asm-avr32/arch-at32ap/cpu.h b/include/asm-avr32/arch-at32ap/cpu.h
index 0dc2026..44d0bfa 100644
--- a/include/asm-avr32/arch-at32ap/cpu.h
+++ b/include/asm-avr32/arch-at32ap/cpu.h
@@ -30,5 +30,6 @@
#define cpu_is_at91sam9261() (0)
#define cpu_is_at91sam9263() (0)
#define cpu_is_at91sam9rl() (0)
+#define cpu_is_at91cap9() (0)
#endif /* __ASM_ARCH_CPU_H */
OpenPOWER on IntegriCloud