summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/networking/mac80211-injection.txt59
-rw-r--r--Documentation/networking/radiotap-headers.txt152
-rw-r--r--include/linux/ieee80211.h11
-rw-r--r--include/net/cfg80211.h38
-rw-r--r--include/net/mac80211.h22
-rw-r--r--net/mac80211/debugfs_netdev.c2
-rw-r--r--net/mac80211/hostapd_ioctl.h8
-rw-r--r--net/mac80211/ieee80211.c449
-rw-r--r--net/mac80211/ieee80211_common.h9
-rw-r--r--net/mac80211/ieee80211_i.h14
-rw-r--r--net/mac80211/ieee80211_iface.c3
-rw-r--r--net/mac80211/ieee80211_ioctl.c240
-rw-r--r--net/mac80211/ieee80211_sta.c98
-rw-r--r--net/mac80211/rc80211_simple.c8
-rw-r--r--net/wireless/Makefile2
-rw-r--r--net/wireless/radiotap.c257
16 files changed, 1050 insertions, 322 deletions
diff --git a/Documentation/networking/mac80211-injection.txt b/Documentation/networking/mac80211-injection.txt
new file mode 100644
index 0000000..53ef7a0
--- /dev/null
+++ b/Documentation/networking/mac80211-injection.txt
@@ -0,0 +1,59 @@
+How to use packet injection with mac80211
+=========================================
+
+mac80211 now allows arbitrary packets to be injected down any Monitor Mode
+interface from userland. The packet you inject needs to be composed in the
+following format:
+
+ [ radiotap header ]
+ [ ieee80211 header ]
+ [ payload ]
+
+The radiotap format is discussed in
+./Documentation/networking/radiotap-headers.txt.
+
+Despite 13 radiotap argument types are currently defined, most only make sense
+to appear on received packets. Currently three kinds of argument are used by
+the injection code, although it knows to skip any other arguments that are
+present (facilitating replay of captured radiotap headers directly):
+
+ - IEEE80211_RADIOTAP_RATE - u8 arg in 500kbps units (0x02 --> 1Mbps)
+
+ - IEEE80211_RADIOTAP_ANTENNA - u8 arg, 0x00 = ant1, 0x01 = ant2
+
+ - IEEE80211_RADIOTAP_DBM_TX_POWER - u8 arg, dBm
+
+Here is an example valid radiotap header defining these three parameters
+
+ 0x00, 0x00, // <-- radiotap version
+ 0x0b, 0x00, // <- radiotap header length
+ 0x04, 0x0c, 0x00, 0x00, // <-- bitmap
+ 0x6c, // <-- rate
+ 0x0c, //<-- tx power
+ 0x01 //<-- antenna
+
+The ieee80211 header follows immediately afterwards, looking for example like
+this:
+
+ 0x08, 0x01, 0x00, 0x00,
+ 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+ 0x13, 0x22, 0x33, 0x44, 0x55, 0x66,
+ 0x13, 0x22, 0x33, 0x44, 0x55, 0x66,
+ 0x10, 0x86
+
+Then lastly there is the payload.
+
+After composing the packet contents, it is sent by send()-ing it to a logical
+mac80211 interface that is in Monitor mode. Libpcap can also be used,
+(which is easier than doing the work to bind the socket to the right
+interface), along the following lines:
+
+ ppcap = pcap_open_live(szInterfaceName, 800, 1, 20, szErrbuf);
+...
+ r = pcap_inject(ppcap, u8aSendBuffer, nLength);
+
+You can also find sources for a complete inject test applet here:
+
+http://penumbra.warmcat.com/_twk/tiki-index.php?page=packetspammer
+
+Andy Green <andy@warmcat.com>
diff --git a/Documentation/networking/radiotap-headers.txt b/Documentation/networking/radiotap-headers.txt
new file mode 100644
index 0000000..953331c
--- /dev/null
+++ b/Documentation/networking/radiotap-headers.txt
@@ -0,0 +1,152 @@
+How to use radiotap headers
+===========================
+
+Pointer to the radiotap include file
+------------------------------------
+
+Radiotap headers are variable-length and extensible, you can get most of the
+information you need to know on them from:
+
+./include/net/ieee80211_radiotap.h
+
+This document gives an overview and warns on some corner cases.
+
+
+Structure of the header
+-----------------------
+
+There is a fixed portion at the start which contains a u32 bitmap that defines
+if the possible argument associated with that bit is present or not. So if b0
+of the it_present member of ieee80211_radiotap_header is set, it means that
+the header for argument index 0 (IEEE80211_RADIOTAP_TSFT) is present in the
+argument area.
+
+ < 8-byte ieee80211_radiotap_header >
+ [ <possible argument bitmap extensions ... > ]
+ [ <argument> ... ]
+
+At the moment there are only 13 possible argument indexes defined, but in case
+we run out of space in the u32 it_present member, it is defined that b31 set
+indicates that there is another u32 bitmap following (shown as "possible
+argument bitmap extensions..." above), and the start of the arguments is moved
+forward 4 bytes each time.
+
+Note also that the it_len member __le16 is set to the total number of bytes
+covered by the ieee80211_radiotap_header and any arguments following.
+
+
+Requirements for arguments
+--------------------------
+
+After the fixed part of the header, the arguments follow for each argument
+index whose matching bit is set in the it_present member of
+ieee80211_radiotap_header.
+
+ - the arguments are all stored little-endian!
+
+ - the argument payload for a given argument index has a fixed size. So
+ IEEE80211_RADIOTAP_TSFT being present always indicates an 8-byte argument is
+ present. See the comments in ./include/net/ieee80211_radiotap.h for a nice
+ breakdown of all the argument sizes
+
+ - the arguments must be aligned to a boundary of the argument size using
+ padding. So a u16 argument must start on the next u16 boundary if it isn't
+ already on one, a u32 must start on the next u32 boundary and so on.
+
+ - "alignment" is relative to the start of the ieee80211_radiotap_header, ie,
+ the first byte of the radiotap header. The absolute alignment of that first
+ byte isn't defined. So even if the whole radiotap header is starting at, eg,
+ address 0x00000003, still the first byte of the radiotap header is treated as
+ 0 for alignment purposes.
+
+ - the above point that there may be no absolute alignment for multibyte
+ entities in the fixed radiotap header or the argument region means that you
+ have to take special evasive action when trying to access these multibyte
+ entities. Some arches like Blackfin cannot deal with an attempt to
+ dereference, eg, a u16 pointer that is pointing to an odd address. Instead
+ you have to use a kernel API get_unaligned() to dereference the pointer,
+ which will do it bytewise on the arches that require that.
+
+ - The arguments for a given argument index can be a compound of multiple types
+ together. For example IEEE80211_RADIOTAP_CHANNEL has an argument payload
+ consisting of two u16s of total length 4. When this happens, the padding
+ rule is applied dealing with a u16, NOT dealing with a 4-byte single entity.
+
+
+Example valid radiotap header
+-----------------------------
+
+ 0x00, 0x00, // <-- radiotap version + pad byte
+ 0x0b, 0x00, // <- radiotap header length
+ 0x04, 0x0c, 0x00, 0x00, // <-- bitmap
+ 0x6c, // <-- rate (in 500kHz units)
+ 0x0c, //<-- tx power
+ 0x01 //<-- antenna
+
+
+Using the Radiotap Parser
+-------------------------
+
+If you are having to parse a radiotap struct, you can radically simplify the
+job by using the radiotap parser that lives in net/wireless/radiotap.c and has
+its prototypes available in include/net/cfg80211.h. You use it like this:
+
+#include <net/cfg80211.h>
+
+/* buf points to the start of the radiotap header part */
+
+int MyFunction(u8 * buf, int buflen)
+{
+ int pkt_rate_100kHz = 0, antenna = 0, pwr = 0;
+ struct ieee80211_radiotap_iterator iterator;
+ int ret = ieee80211_radiotap_iterator_init(&iterator, buf, buflen);
+
+ while (!ret) {
+
+ ret = ieee80211_radiotap_iterator_next(&iterator);
+
+ if (ret)
+ continue;
+
+ /* see if this argument is something we can use */
+
+ switch (iterator.this_arg_index) {
+ /*
+ * You must take care when dereferencing iterator.this_arg
+ * for multibyte types... the pointer is not aligned. Use
+ * get_unaligned((type *)iterator.this_arg) to dereference
+ * iterator.this_arg for type "type" safely on all arches.
+ */
+ case IEEE80211_RADIOTAP_RATE:
+ /* radiotap "rate" u8 is in
+ * 500kbps units, eg, 0x02=1Mbps
+ */
+ pkt_rate_100kHz = (*iterator.this_arg) * 5;
+ break;
+
+ case IEEE80211_RADIOTAP_ANTENNA:
+ /* radiotap uses 0 for 1st ant */
+ antenna = *iterator.this_arg);
+ break;
+
+ case IEEE80211_RADIOTAP_DBM_TX_POWER:
+ pwr = *iterator.this_arg;
+ break;
+
+ default:
+ break;
+ }
+ } /* while more rt headers */
+
+ if (ret != -ENOENT)
+ return TXRX_DROP;
+
+ /* discard the radiotap header part */
+ buf += iterator.max_length;
+ buflen -= iterator.max_length;
+
+ ...
+
+}
+
+Andy Green <andy@warmcat.com>
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index ecd61e8..272f8c8 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -227,6 +227,17 @@ struct ieee80211_cts {
#define WLAN_CAPABILITY_SHORT_SLOT_TIME (1<<10)
#define WLAN_CAPABILITY_DSSS_OFDM (1<<13)
+/* 802.11g ERP information element */
+#define WLAN_ERP_NON_ERP_PRESENT (1<<0)
+#define WLAN_ERP_USE_PROTECTION (1<<1)
+#define WLAN_ERP_BARKER_PREAMBLE (1<<2)
+
+/* WLAN_ERP_BARKER_PREAMBLE values */
+enum {
+ WLAN_ERP_PREAMBLE_SHORT = 0,
+ WLAN_ERP_PREAMBLE_LONG = 1,
+};
+
/* Status codes */
enum ieee80211_statuscode {
WLAN_STATUS_SUCCESS = 0,
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 88171f8..7edaef6 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -11,6 +11,44 @@
* Copyright 2006 Johannes Berg <johannes@sipsolutions.net>
*/
+
+/* Radiotap header iteration
+ * implemented in net/wireless/radiotap.c
+ * docs in Documentation/networking/radiotap-headers.txt
+ */
+/**
+ * struct ieee80211_radiotap_iterator - tracks walk thru present radiotap args
+ * @rtheader: pointer to the radiotap header we are walking through
+ * @max_length: length of radiotap header in cpu byte ordering
+ * @this_arg_index: IEEE80211_RADIOTAP_... index of current arg
+ * @this_arg: pointer to current radiotap arg
+ * @arg_index: internal next argument index
+ * @arg: internal next argument pointer
+ * @next_bitmap: internal pointer to next present u32
+ * @bitmap_shifter: internal shifter for curr u32 bitmap, b0 set == arg present
+ */
+
+struct ieee80211_radiotap_iterator {
+ struct ieee80211_radiotap_header *rtheader;
+ int max_length;
+ int this_arg_index;
+ u8 *this_arg;
+
+ int arg_index;
+ u8 *arg;
+ __le32 *next_bitmap;
+ u32 bitmap_shifter;
+};
+
+extern int ieee80211_radiotap_iterator_init(
+ struct ieee80211_radiotap_iterator *iterator,
+ struct ieee80211_radiotap_header *radiotap_header,
+ int max_length);
+
+extern int ieee80211_radiotap_iterator_next(
+ struct ieee80211_radiotap_iterator *iterator);
+
+
/* from net/wireless.h */
struct wiphy;
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index a7f122b..c34fd9a 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -347,9 +347,16 @@ enum ieee80211_if_types {
* @mac_addr: pointer to MAC address of the interface. This pointer is valid
* until the interface is removed (i.e. it cannot be used after
* remove_interface() callback was called for this interface).
+ * This pointer will be %NULL for monitor interfaces, be careful.
*
* This structure is used in add_interface() and remove_interface()
* callbacks of &struct ieee80211_hw.
+ *
+ * When you allow multiple interfaces to be added to your PHY, take care
+ * that the hardware can actually handle multiple MAC addresses. However,
+ * also take care that when there's no interface left with mac_addr != %NULL
+ * you remove the MAC address from the device to avoid acknowledging packets
+ * in pure monitor mode.
*/
struct ieee80211_if_init_conf {
int if_id;
@@ -574,10 +581,11 @@ struct ieee80211_ops {
* to returning zero. By returning non-zero addition of the interface
* is inhibited. Unless monitor_during_oper is set, it is guaranteed
* that monitor interfaces and normal interfaces are mutually
- * exclusive. The open() handler is called after add_interface()
- * if this is the first device added. At least one of the open()
- * open() and add_interface() callbacks has to be assigned. If
- * add_interface() is NULL, one STA interface is permitted only. */
+ * exclusive. If assigned, the open() handler is called after
+ * add_interface() if this is the first device added. The
+ * add_interface() callback has to be assigned because it is the only
+ * way to obtain the requested MAC address for any interface.
+ */
int (*add_interface)(struct ieee80211_hw *hw,
struct ieee80211_if_init_conf *conf);
@@ -921,12 +929,6 @@ struct sk_buff *
ieee80211_get_buffered_bc(struct ieee80211_hw *hw, int if_id,
struct ieee80211_tx_control *control);
-/* Low level drivers that have their own MLME and MAC indicate
- * the aid for an associating station with this call */
-int ieee80211_set_aid_for_sta(struct ieee80211_hw *hw,
- u8 *peer_address, u16 aid);
-
-
/* Given an sk_buff with a raw 802.11 header at the data pointer this function
* returns the 802.11 header length in bytes (not including encryption
* headers). If the data in the sk_buff is too short to contain a valid 802.11
diff --git a/net/mac80211/debugfs_netdev.c b/net/mac80211/debugfs_netdev.c
index 9e39646..a3e01d7 100644
--- a/net/mac80211/debugfs_netdev.c
+++ b/net/mac80211/debugfs_netdev.c
@@ -118,7 +118,7 @@ static ssize_t ieee80211_if_fmt_flags(
sdata->u.sta.authenticated ? "AUTH\n" : "",
sdata->u.sta.associated ? "ASSOC\n" : "",
sdata->u.sta.probereq_poll ? "PROBEREQ POLL\n" : "",
- sdata->u.sta.use_protection ? "CTS prot\n" : "");
+ sdata->use_protection ? "CTS prot\n" : "");
}
__IEEE80211_IF_FILE(flags);
diff --git a/net/mac80211/hostapd_ioctl.h b/net/mac80211/hostapd_ioctl.h
index 34fa128..52da513 100644
--- a/net/mac80211/hostapd_ioctl.h
+++ b/net/mac80211/hostapd_ioctl.h
@@ -26,24 +26,16 @@
* mess shall be deleted completely. */
enum {
PRISM2_PARAM_IEEE_802_1X = 23,
- PRISM2_PARAM_ANTSEL_TX = 24,
- PRISM2_PARAM_ANTSEL_RX = 25,
/* Instant802 additions */
PRISM2_PARAM_CTS_PROTECT_ERP_FRAMES = 1001,
- PRISM2_PARAM_DROP_UNENCRYPTED = 1002,
PRISM2_PARAM_PREAMBLE = 1003,
PRISM2_PARAM_SHORT_SLOT_TIME = 1006,
PRISM2_PARAM_NEXT_MODE = 1008,
- PRISM2_PARAM_CLEAR_KEYS = 1009,
PRISM2_PARAM_RADIO_ENABLED = 1010,
PRISM2_PARAM_ANTENNA_MODE = 1013,
PRISM2_PARAM_STAT_TIME = 1016,
PRISM2_PARAM_STA_ANTENNA_SEL = 1017,
- PRISM2_PARAM_FORCE_UNICAST_RATE = 1018,
- PRISM2_PARAM_RATE_CTRL_NUM_UP = 1019,
- PRISM2_PARAM_RATE_CTRL_NUM_DOWN = 1020,
- PRISM2_PARAM_MAX_RATECTRL_RATE = 1021,
PRISM2_PARAM_TX_POWER_REDUCTION = 1022,
PRISM2_PARAM_KEY_TX_RX_THRESHOLD = 1024,
PRISM2_PARAM_DEFAULT_WEP_ONLY = 1026,
diff --git a/net/mac80211/ieee80211.c b/net/mac80211/ieee80211.c
index 4e84f24..2ddf4ef 100644
--- a/net/mac80211/ieee80211.c
+++ b/net/mac80211/ieee80211.c
@@ -24,6 +24,7 @@
#include <linux/compiler.h>
#include <linux/bitmap.h>
#include <net/cfg80211.h>
+#include <asm/unaligned.h>
#include "ieee80211_common.h"
#include "ieee80211_i.h"
@@ -56,6 +57,17 @@ static const unsigned char eapol_header[] =
{ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00, 0x88, 0x8e };
+/*
+ * For seeing transmitted packets on monitor interfaces
+ * we have a radiotap header too.
+ */
+struct ieee80211_tx_status_rtap_hdr {
+ struct ieee80211_radiotap_header hdr;
+ __le16 tx_flags;
+ u8 data_retries;
+} __attribute__ ((packed));
+
+
static inline void ieee80211_include_sequence(struct ieee80211_sub_if_data *sdata,
struct ieee80211_hdr *hdr)
{
@@ -430,7 +442,7 @@ ieee80211_tx_h_rate_ctrl(struct ieee80211_txrx_data *tx)
if (!tx->u.tx.rate)
return TXRX_DROP;
if (tx->u.tx.mode->mode == MODE_IEEE80211G &&
- tx->local->cts_protect_erp_frames && tx->fragmented &&
+ tx->sdata->use_protection && tx->fragmented &&
extra.nonerp) {
tx->u.tx.last_frag_rate = tx->u.tx.rate;
tx->u.tx.probe_last_frag = extra.probe ? 1 : 0;
@@ -528,7 +540,7 @@ ieee80211_tx_h_fragment(struct ieee80211_txrx_data *tx)
/* reserve enough extra head and tail room for possible
* encryption */
frag = frags[i] =
- dev_alloc_skb(tx->local->hw.extra_tx_headroom +
+ dev_alloc_skb(tx->local->tx_headroom +
frag_threshold +
IEEE80211_ENCRYPT_HEADROOM +
IEEE80211_ENCRYPT_TAILROOM);
@@ -537,8 +549,8 @@ ieee80211_tx_h_fragment(struct ieee80211_txrx_data *tx)
/* Make sure that all fragments use the same priority so
* that they end up using the same TX queue */
frag->priority = first->priority;
- skb_reserve(frag, tx->local->hw.extra_tx_headroom +
- IEEE80211_ENCRYPT_HEADROOM);
+ skb_reserve(frag, tx->local->tx_headroom +
+ IEEE80211_ENCRYPT_HEADROOM);
fhdr = (struct ieee80211_hdr *) skb_put(frag, hdrlen);
memcpy(fhdr, first->data, hdrlen);
if (i == num_fragm - 2)
@@ -856,8 +868,7 @@ ieee80211_tx_h_misc(struct ieee80211_txrx_data *tx)
* for the frame. */
if (mode->mode == MODE_IEEE80211G &&
(tx->u.tx.rate->flags & IEEE80211_RATE_ERP) &&
- tx->u.tx.unicast &&
- tx->local->cts_protect_erp_frames &&
+ tx->u.tx.unicast && tx->sdata->use_protection &&
!(control->flags & IEEE80211_TXCTL_USE_RTS_CTS))
control->flags |= IEEE80211_TXCTL_USE_CTS_PROTECT;
@@ -1118,7 +1129,138 @@ ieee80211_tx_h_ps_buf(struct ieee80211_txrx_data *tx)
}
-static void inline
+/*
+ * deal with packet injection down monitor interface
+ * with Radiotap Header -- only called for monitor mode interface
+ */
+
+static ieee80211_txrx_result
+__ieee80211_parse_tx_radiotap(
+ struct ieee80211_txrx_data *tx,
+ struct sk_buff *skb, struct ieee80211_tx_control *control)
+{
+ /*
+ * this is the moment to interpret and discard the radiotap header that
+ * must be at the start of the packet injected in Monitor mode
+ *
+ * Need to take some care with endian-ness since radiotap
+ * args are little-endian
+ */
+
+ struct ieee80211_radiotap_iterator iterator;
+ struct ieee80211_radiotap_header *rthdr =
+ (struct ieee80211_radiotap_header *) skb->data;
+ struct ieee80211_hw_mode *mode = tx->local->hw.conf.mode;
+ int ret = ieee80211_radiotap_iterator_init(&iterator, rthdr, skb->len);
+
+ /*
+ * default control situation for all injected packets
+ * FIXME: this does not suit all usage cases, expand to allow control
+ */
+
+ control->retry_limit = 1; /* no retry */
+ control->key_idx = -1; /* no encryption key */
+ control->flags &= ~(IEEE80211_TXCTL_USE_RTS_CTS |
+ IEEE80211_TXCTL_USE_CTS_PROTECT);
+ control->flags |= IEEE80211_TXCTL_DO_NOT_ENCRYPT |
+ IEEE80211_TXCTL_NO_ACK;
+ control->antenna_sel_tx = 0; /* default to default antenna */
+
+ /*
+ * for every radiotap entry that is present
+ * (ieee80211_radiotap_iterator_next returns -ENOENT when no more
+ * entries present, or -EINVAL on error)
+ */
+
+ while (!ret) {
+ int i, target_rate;
+
+ ret = ieee80211_radiotap_iterator_next(&iterator);
+
+ if (ret)
+ continue;
+
+ /* see if this argument is something we can use */
+ switch (iterator.this_arg_index) {
+ /*
+ * You must take care when dereferencing iterator.this_arg
+ * for multibyte types... the pointer is not aligned. Use
+ * get_unaligned((type *)iterator.this_arg) to dereference
+ * iterator.this_arg for type "type" safely on all arches.
+ */
+ case IEEE80211_RADIOTAP_RATE:
+ /*
+ * radiotap rate u8 is in 500kbps units eg, 0x02=1Mbps
+ * ieee80211 rate int is in 100kbps units eg, 0x0a=1Mbps
+ */
+ target_rate = (*iterator.this_arg) * 5;
+ for (i = 0; i < mode->num_rates; i++) {
+ struct ieee80211_rate *r = &mode->rates[i];
+
+ if (r->rate > target_rate)
+ continue;
+
+ control->rate = r;
+
+ if (r->flags & IEEE80211_RATE_PREAMBLE2)
+ control->tx_rate = r->val2;
+ else
+ control->tx_rate = r->val;
+
+ /* end on exact match */
+ if (r->rate == target_rate)
+ i = mode->num_rates;
+ }
+ break;
+
+ case IEEE80211_RADIOTAP_ANTENNA:
+ /*
+ * radiotap uses 0 for 1st ant, mac80211 is 1 for
+ * 1st ant
+ */
+ control->antenna_sel_tx = (*iterator.this_arg) + 1;
+ break;
+
+ case IEEE80211_RADIOTAP_DBM_TX_POWER:
+ control->power_level = *iterator.this_arg;
+ break;
+
+ case IEEE80211_RADIOTAP_FLAGS:
+ if (*iterator.this_arg & IEEE80211_RADIOTAP_F_FCS) {
+ /*
+ * this indicates that the skb we have been
+ * handed has the 32-bit FCS CRC at the end...
+ * we should react to that by snipping it off
+ * because it will be recomputed and added
+ * on transmission
+ */
+ if (skb->len < (iterator.max_length + FCS_LEN))
+ return TXRX_DROP;
+
+ skb_trim(skb, skb->len - FCS_LEN);
+ }
+ break;
+
+ default:
+ break;
+ }
+ }
+
+ if (ret != -ENOENT) /* ie, if we didn't simply run out of fields */
+ return TXRX_DROP;
+
+ /*
+ * remove the radiotap header
+ * iterator->max_length was sanity-checked against
+ * skb->len by iterator init
+ */
+ skb_pull(skb, iterator.max_length);
+
+ return TXRX_CONTINUE;
+}
+
+
+static ieee80211_txrx_result inline
__ieee80211_tx_prepare(struct ieee80211_txrx_data *tx,
struct sk_buff *skb,
struct net_device *dev,
@@ -1126,6 +1268,9 @@ __ieee80211_tx_prepare(struct ieee80211_txrx_data *tx,
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+ struct ieee80211_sub_if_data *sdata;
+ ieee80211_txrx_result res = TXRX_CONTINUE;
+
int hdrlen;
memset(tx, 0, sizeof(*tx));
@@ -1135,7 +1280,32 @@ __ieee80211_tx_prepare(struct ieee80211_txrx_data *tx,
tx->sdata = IEEE80211_DEV_TO_SUB_IF(dev);
tx->sta = sta_info_get(local, hdr->addr1);
tx->fc = le16_to_cpu(hdr->frame_control);
+
+ /*
+ * set defaults for things that can be set by
+ * injected radiotap headers
+ */
control->power_level = local->hw.conf.power_level;
+ control->antenna_sel_tx = local->hw.conf.antenna_sel_tx;
+ if (local->sta_antenna_sel != STA_ANTENNA_SEL_AUTO && tx->sta)
+ control->antenna_sel_tx = tx->sta->antenna_sel_tx;
+
+ /* process and remove the injection radiotap header */
+ sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ if (unlikely(sdata->type == IEEE80211_IF_TYPE_MNTR)) {
+ if (__ieee80211_parse_tx_radiotap(tx, skb, control) ==
+ TXRX_DROP) {
+ return TXRX_DROP;
+ }
+ /*
+ * we removed the radiotap header after this point,
+ * we filled control with what we could use
+ * set to the actual ieee header now
+ */
+ hdr = (struct ieee80211_hdr *) skb->data;
+ res = TXRX_QUEUED; /* indication it was monitor packet */
+ }
+
tx->u.tx.control = control;
tx->u.tx.unicast = !is_multicast_ether_addr(hdr->addr1);
if (is_multicast_ether_addr(hdr->addr1))
@@ -1152,9 +1322,6 @@ __ieee80211_tx_prepare(struct ieee80211_txrx_data *tx,
control->flags |= IEEE80211_TXCTL_CLEAR_DST_MASK;
tx->sta->clear_dst_mask = 0;
}
- control->antenna_sel_tx = local->hw.conf.antenna_sel_tx;
- if (local->sta_antenna_sel != STA_ANTENNA_SEL_AUTO && tx->sta)
- control->antenna_sel_tx = tx->sta->antenna_sel_tx;
hdrlen = ieee80211_get_hdrlen(tx->fc);
if (skb->len > hdrlen + sizeof(rfc1042_header) + 2) {
u8 *pos = &skb->data[hdrlen + sizeof(rfc1042_header)];
@@ -1162,6 +1329,7 @@ __ieee80211_tx_prepare(struct ieee80211_txrx_data *tx,
}
control->flags |= IEEE80211_TXCTL_FIRST_FRAGMENT;
+ return res;
}
static int inline is_ieee80211_device(struct net_device *dev,
@@ -1274,7 +1442,7 @@ static int ieee80211_tx(struct net_device *dev, struct sk_buff *skb,
struct sta_info *sta;
ieee80211_tx_handler *handler;
struct ieee80211_txrx_data tx;
- ieee80211_txrx_result res = TXRX_DROP;
+ ieee80211_txrx_result res = TXRX_DROP, res_prepare;
int ret, i;
WARN_ON(__ieee80211_queue_pending(local, control->queue));
@@ -1284,15 +1452,26 @@ static int ieee80211_tx(struct net_device *dev, struct sk_buff *skb,
return 0;
}
- __ieee80211_tx_prepare(&tx, skb, dev, control);
+ res_prepare = __ieee80211_tx_prepare(&tx, skb, dev, control);
+
+ if (res_prepare == TXRX_DROP) {
+ dev_kfree_skb(skb);
+ return 0;
+ }
+
sta = tx.sta;
tx.u.tx.mgmt_interface = mgmt;
tx.u.tx.mode = local->hw.conf.mode;
- for (handler = local->tx_handlers; *handler != NULL; handler++) {
- res = (*handler)(&tx);
- if (res != TXRX_CONTINUE)
- break;
+ if (res_prepare == TXRX_QUEUED) { /* if it was an injected packet */
+ res = TXRX_CONTINUE;
+ } else {
+ for (handler = local->tx_handlers; *handler != NULL;
+ handler++) {
+ res = (*handler)(&tx);
+ if (res != TXRX_CONTINUE)
+ break;
+ }
}
skb = tx.skb; /* handlers are allowed to change skb */
@@ -1467,8 +1646,7 @@ static int ieee80211_master_start_xmit(struct sk_buff *skb,
}
osdata = IEEE80211_DEV_TO_SUB_IF(odev);
- headroom = osdata->local->hw.extra_tx_headroom +
- IEEE80211_ENCRYPT_HEADROOM;
+ headroom = osdata->local->tx_headroom + IEEE80211_ENCRYPT_HEADROOM;
if (skb_headroom(skb) < headroom) {
if (pskb_expand_head(skb, headroom, 0, GFP_ATOMIC)) {
dev_kfree_skb(skb);
@@ -1494,6 +1672,56 @@ static int ieee80211_master_start_xmit(struct sk_buff *skb,
}
+int ieee80211_monitor_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
+{
+ struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_tx_packet_data *pkt_data;
+ struct ieee80211_radiotap_header *prthdr =
+ (struct ieee80211_radiotap_header *)skb->data;
+ u16 len;
+
+ /*
+ * there must be a radiotap header at the
+ * start in this case
+ */
+ if (unlikely(prthdr->it_version)) {
+ /* only version 0 is supported */
+ dev_kfree_skb(skb);
+ return NETDEV_TX_OK;
+ }
+
+ skb->dev = local->mdev;
+
+ pkt_data = (struct ieee80211_tx_packet_data *)skb->cb;
+ memset(pkt_data, 0, sizeof(*pkt_data));
+ pkt_data->ifindex = dev->ifindex;
+ pkt_data->mgmt_iface = 0;
+ pkt_data->do_not_encrypt = 1;
+
+ /* above needed because we set skb device to master */
+
+ /*
+ * fix up the pointers accounting for the radiotap
+ * header still being in there. We are being given
+ * a precooked IEEE80211 header so no need for
+ * normal processing
+ */
+ len = le16_to_cpu(get_unaligned(&prthdr->it_len));
+ skb_set_mac_header(skb, len);
+ skb_set_network_header(skb, len + sizeof(struct ieee80211_hdr));
+ skb_set_transport_header(skb, len + sizeof(struct ieee80211_hdr));
+
+ /*
+ * pass the radiotap header up to
+ * the next stage intact
+ */
+ dev_queue_xmit(skb);
+
+ return NETDEV_TX_OK;
+}
+
+
/**
* ieee80211_subif_start_xmit - netif start_xmit function for Ethernet-type
* subinterfaces (wlan#, WDS, and VLAN interfaces)
@@ -1509,8 +1737,8 @@ static int ieee80211_master_start_xmit(struct sk_buff *skb,
* encapsulated packet will then be passed to master interface, wlan#.11, for
* transmission (through low-level driver).
*/
-static int ieee80211_subif_start_xmit(struct sk_buff *skb,
- struct net_device *dev)
+int ieee80211_subif_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_tx_packet_data *pkt_data;
@@ -1619,7 +1847,7 @@ static int ieee80211_subif_start_xmit(struct sk_buff *skb,
* build in headroom in __dev_alloc_skb() (linux/skbuff.h) and
* alloc_skb() (net/core/skbuff.c)
*/
- head_need = hdrlen + encaps_len + local->hw.extra_tx_headroom;
+ head_need = hdrlen + encaps_len + local->tx_headroom;
head_need -= skb_headroom(skb);
/* We are going to modify skb data, so make a copy of it if happens to
@@ -1658,7 +1886,7 @@ static int ieee80211_subif_start_xmit(struct sk_buff *skb,
pkt_data = (struct ieee80211_tx_packet_data *)skb->cb;
memset(pkt_data, 0, sizeof(struct ieee80211_tx_packet_data));
- pkt_data->ifindex = sdata->dev->ifindex;
+ pkt_data->ifindex = dev->ifindex;
pkt_data->mgmt_iface = (sdata->type == IEEE80211_IF_TYPE_MGMT);
pkt_data->do_not_encrypt = no_encrypt;
@@ -1706,9 +1934,9 @@ ieee80211_mgmt_start_xmit(struct sk_buff *skb, struct net_device *dev)
return 0;
}
- if (skb_headroom(skb) < sdata->local->hw.extra_tx_headroom) {
- if (pskb_expand_head(skb,
- sdata->local->hw.extra_tx_headroom, 0, GFP_ATOMIC)) {
+ if (skb_headroom(skb) < sdata->local->tx_headroom) {
+ if (pskb_expand_head(skb, sdata->local->tx_headroom,
+ 0, GFP_ATOMIC)) {
dev_kfree_skb(skb);
return 0;
}
@@ -1847,12 +2075,12 @@ struct sk_buff * ieee80211_beacon_get(struct ieee80211_hw *hw, int if_id,
bh_len = ap->beacon_head_len;
bt_len = ap->beacon_tail_len;
- skb = dev_alloc_skb(local->hw.extra_tx_headroom +
+ skb = dev_alloc_skb(local->tx_headroom +
bh_len + bt_len + 256 /* maximum TIM len */);
if (!skb)
return NULL;
- skb_reserve(skb, local->hw.extra_tx_headroom);
+ skb_reserve(skb, local->tx_headroom);
memcpy(skb_put(skb, bh_len), b_head, bh_len);
ieee80211_include_sequence(sdata, (struct ieee80211_hdr *)skb->data);
@@ -2376,8 +2604,7 @@ static void ieee80211_start_hard_monitor(struct ieee80211_local *local)
struct ieee80211_if_init_conf conf;
if (local->open_count && local->open_count == local->monitors &&
- !(local->hw.flags & IEEE80211_HW_MONITOR_DURING_OPER) &&
- local->ops->add_interface) {
+ !(local->hw.flags & IEEE80211_HW_MONITOR_DURING_OPER)) {
conf.if_id = -1;
conf.type = IEEE80211_IF_TYPE_MNTR;
conf.mac_addr = NULL;
@@ -2420,21 +2647,14 @@ static int ieee80211_open(struct net_device *dev)
}
ieee80211_start_soft_monitor(local);
- if (local->ops->add_interface) {
- conf.if_id = dev->ifindex;
- conf.type = sdata->type;
- conf.mac_addr = dev->dev_addr;
- res = local->ops->add_interface(local_to_hw(local), &conf);
- if (res) {
- if (sdata->type == IEEE80211_IF_TYPE_MNTR)
- ieee80211_start_hard_monitor(local);
- return res;
- }
- } else {
- if (sdata->type != IEEE80211_IF_TYPE_STA)
- return -EOPNOTSUPP;
- if (local->open_count > 0)
- return -ENOBUFS;
+ conf.if_id = dev->ifindex;
+ conf.type = sdata->type;
+ conf.mac_addr = dev->dev_addr;
+ res = local->ops->add_interface(local_to_hw(local), &conf);
+ if (res) {
+ if (sdata->type == IEEE80211_IF_TYPE_MNTR)
+ ieee80211_start_hard_monitor(local);
+ return res;
}
if (local->open_count == 0) {
@@ -2941,34 +3161,6 @@ int ieee80211_radar_status(struct ieee80211_hw *hw, int channel,
}
EXPORT_SYMBOL(ieee80211_radar_status);
-int ieee80211_set_aid_for_sta(struct ieee80211_hw *hw, u8 *peer_address,
- u16 aid)
-{
- struct sk_buff *skb;
- struct ieee80211_msg_set_aid_for_sta *msg;
- struct ieee80211_local *local = hw_to_local(hw);
-
- /* unlikely because if this event only happens for APs,
- * which require an open ap device. */
- if (unlikely(!local->apdev))
- return 0;
-
- skb = dev_alloc_skb(sizeof(struct ieee80211_frame_info) +
- sizeof(struct ieee80211_msg_set_aid_for_sta));
-
- if (!skb)
- return -ENOMEM;
- skb_reserve(skb, sizeof(struct ieee80211_frame_info));
-
- msg = (struct ieee80211_msg_set_aid_for_sta *)
- skb_put(skb, sizeof(struct ieee80211_msg_set_aid_for_sta));
- memcpy(msg->sta_address, peer_address, ETH_ALEN);
- msg->aid = aid;
-
- ieee80211_rx_mgmt(local, skb, NULL, ieee80211_msg_set_aid_for_sta);
- return 0;
-}
-EXPORT_SYMBOL(ieee80211_set_aid_for_sta);
static void ap_sta_ps_start(struct net_device *dev, struct sta_info *sta)
{
@@ -4284,6 +4476,9 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb,
struct ieee80211_local *local = hw_to_local(hw);
u16 frag, type;
u32 msg_type;
+ struct ieee80211_tx_status_rtap_hdr *rthdr;
+ struct ieee80211_sub_if_data *sdata;
+ int monitors;
if (!status) {
printk(KERN_ERR
@@ -4395,27 +4590,100 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb,
local->dot11FailedCount++;
}
- if (!(status->control.flags & IEEE80211_TXCTL_REQ_TX_STATUS)
- || unlikely(!local->apdev)) {
+ msg_type = (status->flags & IEEE80211_TX_STATUS_ACK) ?
+ ieee80211_msg_tx_callback_ack : ieee80211_msg_tx_callback_fail;
+
+ /* this was a transmitted frame, but now we want to reuse it */
+ skb_orphan(skb);
+
+ if ((status->control.flags & IEEE80211_TXCTL_REQ_TX_STATUS) &&
+ local->apdev) {
+ if (local->monitors) {
+ skb2 = skb_clone(skb, GFP_ATOMIC);
+ } else {
+ skb2 = skb;
+ skb = NULL;
+ }
+
+ if (skb2)
+ /* Send frame to hostapd */
+ ieee80211_rx_mgmt(local, skb2, NULL, msg_type);
+
+ if (!skb)
+ return;
+ }
+
+ if (!local->monitors) {
dev_kfree_skb(skb);
return;
}
- msg_type = (status->flags & IEEE80211_TX_STATUS_ACK) ?
- ieee80211_msg_tx_callback_ack : ieee80211_msg_tx_callback_fail;
+ /* send frame to monitor interfaces now */
- /* skb was the original skb used for TX. Clone it and give the clone
- * to netif_rx(). Free original skb. */
- skb2 = skb_copy(skb, GFP_ATOMIC);
- if (!skb2) {
+ if (skb_headroom(skb) < sizeof(*rthdr)) {
+ printk(KERN_ERR "ieee80211_tx_status: headroom too small\n");
dev_kfree_skb(skb);
return;
}
- dev_kfree_skb(skb);
- skb = skb2;
- /* Send frame to hostapd */
- ieee80211_rx_mgmt(local, skb, NULL, msg_type);
+ rthdr = (struct ieee80211_tx_status_rtap_hdr*)
+ skb_push(skb, sizeof(*rthdr));
+
+ memset(rthdr, 0, sizeof(*rthdr));
+ rthdr->hdr.it_len = cpu_to_le16(sizeof(*rthdr));
+ rthdr->hdr.it_present =
+ cpu_to_le32((1 << IEEE80211_RADIOTAP_TX_FLAGS) |
+ (1 << IEEE80211_RADIOTAP_DATA_RETRIES));
+
+ if (!(status->flags & IEEE80211_TX_STATUS_ACK) &&
+ !is_multicast_ether_addr(hdr->addr1))
+ rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_FAIL);
+
+ if ((status->control.flags & IEEE80211_TXCTL_USE_RTS_CTS) &&
+ (status->control.flags & IEEE80211_TXCTL_USE_CTS_PROTECT))
+ rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_CTS);
+ else if (status->control.flags & IEEE80211_TXCTL_USE_RTS_CTS)
+ rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_RTS);
+
+ rthdr->data_retries = status->retry_count;
+
+ read_lock(&local->sub_if_lock);
+ monitors = local->monitors;
+ list_for_each_entry(sdata, &local->sub_if_list, list) {
+ /*
+ * Using the monitors counter is possibly racy, but
+ * if the value is wrong we simply either clone the skb
+ * once too much or forget sending it to one monitor iface
+ * The latter case isn't nice but fixing the race is much
+ * more complicated.
+ */
+ if (!monitors || !skb)
+ goto out;
+
+ if (sdata->type == IEEE80211_IF_TYPE_MNTR) {
+ if (!netif_running(sdata->dev))
+ continue;
+ monitors--;
+ if (monitors)
+ skb2 = skb_clone(skb, GFP_KERNEL);
+ else
+ skb2 = NULL;
+ skb->dev = sdata->dev;
+ /* XXX: is this sufficient for BPF? */
+ skb_set_mac_header(skb, 0);
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ skb->pkt_type = PACKET_OTHERHOST;
+ skb->protocol = htons(ETH_P_802_2);
+ memset(skb->cb, 0, sizeof(skb->cb));
+ netif_rx(skb);
+ skb = skb2;
+ break;
+ }
+ }
+ out:
+ read_unlock(&local->sub_if_lock);
+ if (skb)
+ dev_kfree_skb(skb);
}
EXPORT_SYMBOL(ieee80211_tx_status);
@@ -4619,6 +4887,9 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
((sizeof(struct ieee80211_local) +
NETDEV_ALIGN_CONST) & ~NETDEV_ALIGN_CONST);
+ BUG_ON(!ops->tx);
+ BUG_ON(!ops->config);
+ BUG_ON(!ops->add_interface);
local->ops = ops;
/* for now, mdev needs sub_if_data :/ */
@@ -4647,8 +4918,6 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
local->short_retry_limit = 7;
local->long_retry_limit = 4;
local->hw.conf.radio_enabled = 1;
- local->rate_ctrl_num_up = RATE_CONTROL_NUM_UP;
- local->rate_ctrl_num_down = RATE_CONTROL_NUM_DOWN;
local->enabled_modes = (unsigned int) -1;
@@ -4712,6 +4981,14 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
goto fail_workqueue;
}
+ /*
+ * The hardware needs headroom for sending the frame,
+ * and we need some headroom for passing the frame to monitor
+ * interfaces, but never both at the same time.
+ */
+ local->tx_headroom = max(local->hw.extra_tx_headroom,
+ sizeof(struct ieee80211_tx_status_rtap_hdr));
+
debugfs_hw_add(local);
local->hw.conf.beacon_int = 1000;
diff --git a/net/mac80211/ieee80211_common.h b/net/mac80211/ieee80211_common.h
index b9a73e7..77c6afb 100644
--- a/net/mac80211/ieee80211_common.h
+++ b/net/mac80211/ieee80211_common.h
@@ -47,21 +47,16 @@ enum ieee80211_msg_type {
ieee80211_msg_normal = 0,
ieee80211_msg_tx_callback_ack = 1,
ieee80211_msg_tx_callback_fail = 2,
- ieee80211_msg_passive_scan = 3,
+ /* hole at 3, was ieee80211_msg_passive_scan but unused */
ieee80211_msg_wep_frame_unknown_key = 4,
ieee80211_msg_michael_mic_failure = 5,
/* hole at 6, was monitor but never sent to userspace */
ieee80211_msg_sta_not_assoc = 7,
- ieee80211_msg_set_aid_for_sta = 8 /* used by Intersil MVC driver */,
+ /* 8 was ieee80211_msg_set_aid_for_sta */
ieee80211_msg_key_threshold_notification = 9,
ieee80211_msg_radar = 11,
};
-struct ieee80211_msg_set_aid_for_sta {
- char sta_address[ETH_ALEN];
- u16 aid;
-};
-
struct ieee80211_msg_key_notification {
int tx_rx_count;
char ifname[IFNAMSIZ];
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index af4d14d..055a2a9 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -99,6 +99,12 @@ struct ieee80211_sta_bss {
int probe_resp;
unsigned long last_update;
+ /* during assocation, we save an ERP value from a probe response so
+ * that we can feed ERP info to the driver when handling the
+ * association completes. these fields probably won't be up-to-date
+ * otherwise, you probably don't want to use them. */
+ int has_erp_value;
+ u8 erp_value;
};
@@ -235,7 +241,6 @@ struct ieee80211_if_sta {
unsigned int authenticated:1;
unsigned int associated:1;
unsigned int probereq_poll:1;
- unsigned int use_protection:1;
unsigned int create_ibss:1;
unsigned int mixed_cell:1;
unsigned int wmm_enabled:1;
@@ -278,6 +283,7 @@ struct ieee80211_sub_if_data {
int mc_count;
unsigned int allmulti:1;
unsigned int promisc:1;
+ unsigned int use_protection:1; /* CTS protect ERP frames */
struct net_device_stats stats;
int drop_unencrypted;
@@ -392,6 +398,7 @@ struct ieee80211_local {
int monitors;
struct iw_statistics wstats;
u8 wstats_flags;
+ int tx_headroom; /* required headroom for hardware/radiotap */
enum {
IEEE80211_DEV_UNINITIALIZED = 0,
@@ -437,7 +444,6 @@ struct ieee80211_local {
int *basic_rates[NUM_IEEE80211_MODES];
int rts_threshold;
- int cts_protect_erp_frames;
int fragmentation_threshold;
int short_retry_limit; /* dot11ShortRetryLimit */
int long_retry_limit; /* dot11LongRetryLimit */
@@ -513,8 +519,6 @@ struct ieee80211_local {
STA_ANTENNA_SEL_SW_CTRL_DEBUG = 2
} sta_antenna_sel;
- int rate_ctrl_num_up, rate_ctrl_num_down;
-
#ifdef CONFIG_MAC80211_DEBUG_COUNTERS
/* TX/RX handler statistics */
unsigned int tx_handlers_drop;
@@ -719,6 +723,8 @@ void ieee80211_prepare_rates(struct ieee80211_local *local,
struct ieee80211_hw_mode *mode);
void ieee80211_tx_set_iswep(struct ieee80211_txrx_data *tx);
int ieee80211_if_update_wds(struct net_device *dev, u8 *remote_addr);
+int ieee80211_monitor_start_xmit(struct sk_buff *skb, struct net_device *dev);
+int ieee80211_subif_start_xmit(struct sk_buff *skb, struct net_device *dev);
void ieee80211_if_setup(struct net_device *dev);
void ieee80211_if_mgmt_setup(struct net_device *dev);
int ieee80211_init_rate_ctrl_alg(struct ieee80211_local *local,
diff --git a/net/mac80211/ieee80211_iface.c b/net/mac80211/ieee80211_iface.c
index cf0f32e..8532a5c 100644
--- a/net/mac80211/ieee80211_iface.c
+++ b/net/mac80211/ieee80211_iface.c
@@ -157,6 +157,8 @@ void ieee80211_if_set_type(struct net_device *dev, int type)
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
int oldtype = sdata->type;
+ dev->hard_start_xmit = ieee80211_subif_start_xmit;
+
sdata->type = type;
switch (type) {
case IEEE80211_IF_TYPE_WDS:
@@ -196,6 +198,7 @@ void ieee80211_if_set_type(struct net_device *dev, int type)
}
case IEEE80211_IF_TYPE_MNTR:
dev->type = ARPHRD_IEEE80211_RADIOTAP;
+ dev->hard_start_xmit = ieee80211_monitor_start_xmit;
break;
default:
printk(KERN_WARNING "%s: %s: Unknown interface type 0x%x",
diff --git a/net/mac80211/ieee80211_ioctl.c b/net/mac80211/ieee80211_ioctl.c
index 66e8a97..5918dd0 100644
--- a/net/mac80211/ieee80211_ioctl.c
+++ b/net/mac80211/ieee80211_ioctl.c
@@ -345,6 +345,8 @@ static int ieee80211_ioctl_giwrange(struct net_device *dev,
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct iw_range *range = (struct iw_range *) extra;
+ struct ieee80211_hw_mode *mode = NULL;
+ int c = 0;
data->length = sizeof(struct iw_range);
memset(range, 0, sizeof(struct iw_range));
@@ -378,6 +380,29 @@ static int ieee80211_ioctl_giwrange(struct net_device *dev,
range->enc_capa = IW_ENC_CAPA_WPA | IW_ENC_CAPA_WPA2 |
IW_ENC_CAPA_CIPHER_TKIP | IW_ENC_CAPA_CIPHER_CCMP;
+ list_for_each_entry(mode, &local->modes_list, list) {
+ int i = 0;
+
+ if (!(local->enabled_modes & (1 << mode->mode)) ||
+ (local->hw_modes & local->enabled_modes &
+ (1 << MODE_IEEE80211G) && mode->mode == MODE_IEEE80211B))
+ continue;
+
+ while (i < mode->num_channels && c < IW_MAX_FREQUENCIES) {
+ struct ieee80211_channel *chan = &mode->channels[i];
+
+ if (chan->flag & IEEE80211_CHAN_W_SCAN) {
+ range->freq[c].i = chan->chan;
+ range->freq[c].m = chan->freq * 100000;
+ range->freq[c].e = 1;
+ c++;
+ }
+ i++;
+ }
+ }
+ range->num_channels = c;
+ range->num_frequency = c;
+
IW_EVENT_CAPA_SET_KERNEL(range->event_capa);
IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWTHRSPY);
IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWAP);
@@ -838,6 +863,44 @@ static int ieee80211_ioctl_giwscan(struct net_device *dev,
}
+static int ieee80211_ioctl_siwrate(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *rate, char *extra)
+{
+ struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_hw_mode *mode;
+ int i;
+ u32 target_rate = rate->value / 100000;
+ struct ieee80211_sub_if_data *sdata;
+
+ sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ if (!sdata->bss)
+ return -ENODEV;
+ mode = local->oper_hw_mode;
+ /* target_rate = -1, rate->fixed = 0 means auto only, so use all rates
+ * target_rate = X, rate->fixed = 1 means only rate X
+ * target_rate = X, rate->fixed = 0 means all rates <= X */
+ sdata->bss->max_ratectrl_rateidx = -1;
+ sdata->bss->force_unicast_rateidx = -1;
+ if (rate->value < 0)
+ return 0;
+ for (i=0; i< mode->num_rates; i++) {
+ struct ieee80211_rate *rates = &mode->rates[i];
+ int this_rate = rates->rate;
+
+ if (mode->mode == MODE_ATHEROS_TURBO ||
+ mode->mode == MODE_ATHEROS_TURBOG)
+ this_rate *= 2;
+ if (target_rate == this_rate) {
+ sdata->bss->max_ratectrl_rateidx = i;
+ if (rate->fixed)
+ sdata->bss->force_unicast_rateidx = i;
+ break;
+ }
+ }
+ return 0;
+}
+
static int ieee80211_ioctl_giwrate(struct net_device *dev,
struct iw_request_info *info,
struct iw_param *rate, char *extra)
@@ -993,118 +1056,6 @@ static int ieee80211_ioctl_giwretry(struct net_device *dev,
return 0;
}
-static int ieee80211_ioctl_clear_keys(struct net_device *dev)
-{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
- struct ieee80211_key_conf key;
- int i;
- u8 addr[ETH_ALEN];
- struct ieee80211_key_conf *keyconf;
- struct ieee80211_sub_if_data *sdata;
- struct sta_info *sta;
-
- memset(addr, 0xff, ETH_ALEN);
- read_lock(&local->sub_if_lock);
- list_for_each_entry(sdata, &local->sub_if_list, list) {
- for (i = 0; i < NUM_DEFAULT_KEYS; i++) {
- keyconf = NULL;
- if (sdata->keys[i] &&
- !sdata->keys[i]->force_sw_encrypt &&
- local->ops->set_key &&
- (keyconf = ieee80211_key_data2conf(local,
- sdata->keys[i])))
- local->ops->set_key(local_to_hw(local),
- DISABLE_KEY, addr,
- keyconf, 0);
- kfree(keyconf);
- ieee80211_key_free(sdata->keys[i]);
- sdata->keys[i] = NULL;
- }
- sdata->default_key = NULL;
- }
- read_unlock(&local->sub_if_lock);
-
- spin_lock_bh(&local->sta_lock);
- list_for_each_entry(sta, &local->sta_list, list) {
- keyconf = NULL;
- if (sta->key && !sta->key->force_sw_encrypt &&
- local->ops->set_key &&
- (keyconf = ieee80211_key_data2conf(local, sta->key)))
- local->ops->set_key(local_to_hw(local), DISABLE_KEY,
- sta->addr, keyconf, sta->aid);
- kfree(keyconf);
- ieee80211_key_free(sta->key);
- sta->key = NULL;
- }
- spin_unlock_bh(&local->sta_lock);
-
- memset(&key, 0, sizeof(key));
- if (local->ops->set_key &&
- local->ops->set_key(local_to_hw(local), REMOVE_ALL_KEYS,
- NULL, &key, 0))
- printk(KERN_DEBUG "%s: failed to remove hwaccel keys\n",
- dev->name);
-
- return 0;
-}
-
-
-static int
-ieee80211_ioctl_force_unicast_rate(struct net_device *dev,
- struct ieee80211_sub_if_data *sdata,
- int rate)
-{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
- struct ieee80211_hw_mode *mode;
- int i;
-
- if (sdata->type != IEEE80211_IF_TYPE_AP)
- return -ENOENT;
-
- if (rate == 0) {
- sdata->u.ap.force_unicast_rateidx = -1;
- return 0;
- }
-
- mode = local->oper_hw_mode;
- for (i = 0; i < mode->num_rates; i++) {
- if (mode->rates[i].rate == rate) {
- sdata->u.ap.force_unicast_rateidx = i;
- return 0;
- }
- }
- return -EINVAL;
-}
-
-
-static int
-ieee80211_ioctl_max_ratectrl_rate(struct net_device *dev,
- struct ieee80211_sub_if_data *sdata,
- int rate)
-{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
- struct ieee80211_hw_mode *mode;
- int i;
-
- if (sdata->type != IEEE80211_IF_TYPE_AP)
- return -ENOENT;
-
- if (rate == 0) {
- sdata->u.ap.max_ratectrl_rateidx = -1;
- return 0;
- }
-
- mode = local->oper_hw_mode;
- for (i = 0; i < mode->num_rates; i++) {
- if (mode->rates[i].rate == rate) {
- sdata->u.ap.max_ratectrl_rateidx = i;
- return 0;
- }
- }
- return -EINVAL;
-}
-
-
static void ieee80211_key_enable_hwaccel(struct ieee80211_local *local,
struct ieee80211_key *key)
{
@@ -1228,24 +1179,11 @@ static int ieee80211_ioctl_prism2_param(struct net_device *dev,
sdata->ieee802_1x = value;
break;
- case PRISM2_PARAM_ANTSEL_TX:
- local->hw.conf.antenna_sel_tx = value;
- if (ieee80211_hw_config(local))
- ret = -EINVAL;
- break;
-
- case PRISM2_PARAM_ANTSEL_RX:
- local->hw.conf.antenna_sel_rx = value;
- if (ieee80211_hw_config(local))
- ret = -EINVAL;
- break;
-
case PRISM2_PARAM_CTS_PROTECT_ERP_FRAMES:
- local->cts_protect_erp_frames = value;
- break;
-
- case PRISM2_PARAM_DROP_UNENCRYPTED:
- sdata->drop_unencrypted = value;
+ if (sdata->type != IEEE80211_IF_TYPE_AP)
+ ret = -ENOENT;
+ else
+ sdata->use_protection = value;
break;
case PRISM2_PARAM_PREAMBLE:
@@ -1274,10 +1212,6 @@ static int ieee80211_ioctl_prism2_param(struct net_device *dev,
local->next_mode = value;
break;
- case PRISM2_PARAM_CLEAR_KEYS:
- ret = ieee80211_ioctl_clear_keys(dev);
- break;
-
case PRISM2_PARAM_RADIO_ENABLED:
ret = ieee80211_ioctl_set_radio_enabled(dev, value);
break;
@@ -1292,22 +1226,6 @@ static int ieee80211_ioctl_prism2_param(struct net_device *dev,
local->sta_antenna_sel = value;
break;
- case PRISM2_PARAM_FORCE_UNICAST_RATE:
- ret = ieee80211_ioctl_force_unicast_rate(dev, sdata, value);
- break;
-
- case PRISM2_PARAM_MAX_RATECTRL_RATE:
- ret = ieee80211_ioctl_max_ratectrl_rate(dev, sdata, value);
- break;
-
- case PRISM2_PARAM_RATE_CTRL_NUM_UP:
- local->rate_ctrl_num_up = value;
- break;
-
- case PRISM2_PARAM_RATE_CTRL_NUM_DOWN:
- local->rate_ctrl_num_down = value;
- break;
-
case PRISM2_PARAM_TX_POWER_REDUCTION:
if (value < 0)
ret = -EINVAL;
@@ -1387,20 +1305,8 @@ static int ieee80211_ioctl_get_prism2_param(struct net_device *dev,
*param = sdata->ieee802_1x;
break;
- case PRISM2_PARAM_ANTSEL_TX:
- *param = local->hw.conf.antenna_sel_tx;
- break;
-
- case PRISM2_PARAM_ANTSEL_RX:
- *param = local->hw.conf.antenna_sel_rx;
- break;
-
case PRISM2_PARAM_CTS_PROTECT_ERP_FRAMES:
- *param = local->cts_protect_erp_frames;
- break;
-
- case PRISM2_PARAM_DROP_UNENCRYPTED:
- *param = sdata->drop_unencrypted;
+ *param = sdata->use_protection;
break;
case PRISM2_PARAM_PREAMBLE:
@@ -1426,14 +1332,6 @@ static int ieee80211_ioctl_get_prism2_param(struct net_device *dev,
*param = local->sta_antenna_sel;
break;
- case PRISM2_PARAM_RATE_CTRL_NUM_UP:
- *param = local->rate_ctrl_num_up;
- break;
-
- case PRISM2_PARAM_RATE_CTRL_NUM_DOWN:
- *param = local->rate_ctrl_num_down;
- break;
-
case PRISM2_PARAM_TX_POWER_REDUCTION:
*param = local->hw.conf.tx_power_reduction;
break;
@@ -1801,7 +1699,7 @@ static const iw_handler ieee80211_handler[] =
(iw_handler) NULL, /* SIOCGIWNICKN */
(iw_handler) NULL, /* -- hole -- */
(iw_handler) NULL, /* -- hole -- */
- (iw_handler) NULL, /* SIOCSIWRATE */
+ (iw_handler) ieee80211_ioctl_siwrate, /* SIOCSIWRATE */
(iw_handler) ieee80211_ioctl_giwrate, /* SIOCGIWRATE */
(iw_handler) ieee80211_ioctl_siwrts, /* SIOCSIWRTS */
(iw_handler) ieee80211_ioctl_giwrts, /* SIOCGIWRTS */
diff --git a/net/mac80211/ieee80211_sta.c b/net/mac80211/ieee80211_sta.c
index 91b545c..ba2bf8f 100644
--- a/net/mac80211/ieee80211_sta.c
+++ b/net/mac80211/ieee80211_sta.c
@@ -76,33 +76,36 @@ static int ieee80211_sta_config_auth(struct net_device *dev,
/* Parsed Information Elements */
struct ieee802_11_elems {
+ /* pointers to IEs */
u8 *ssid;
- u8 ssid_len;
u8 *supp_rates;
- u8 supp_rates_len;
u8 *fh_params;
- u8 fh_params_len;
u8 *ds_params;
- u8 ds_params_len;
u8 *cf_params;
- u8 cf_params_len;
u8 *tim;
- u8 tim_len;
u8 *ibss_params;
- u8 ibss_params_len;
u8 *challenge;
- u8 challenge_len;
u8 *wpa;
- u8 wpa_len;
u8 *rsn;
- u8 rsn_len;
u8 *erp_info;
- u8 erp_info_len;
u8 *ext_supp_rates;
- u8 ext_supp_rates_len;
u8 *wmm_info;
- u8 wmm_info_len;
u8 *wmm_param;
+
+ /* length of them, respectively */
+ u8 ssid_len;
+ u8 supp_rates_len;
+ u8 fh_params_len;
+ u8 ds_params_len;
+ u8 cf_params_len;
+ u8 tim_len;
+ u8 ibss_params_len;
+ u8 challenge_len;
+ u8 wpa_len;
+ u8 rsn_len;
+ u8 erp_info_len;
+ u8 ext_supp_rates_len;
+ u8 wmm_info_len;
u8 wmm_param_len;
};
@@ -311,6 +314,25 @@ static void ieee80211_sta_wmm_params(struct net_device *dev,
}
+static void ieee80211_handle_erp_ie(struct net_device *dev, u8 erp_value)
+{
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct ieee80211_if_sta *ifsta = &sdata->u.sta;
+ int use_protection = (erp_value & WLAN_ERP_USE_PROTECTION) != 0;
+
+ if (use_protection != sdata->use_protection) {
+ if (net_ratelimit()) {
+ printk(KERN_DEBUG "%s: CTS protection %s (BSSID="
+ MAC_FMT ")\n",
+ dev->name,
+ use_protection ? "enabled" : "disabled",
+ MAC_ARG(ifsta->bssid));
+ }
+ sdata->use_protection = use_protection;
+ }
+}
+
+
static void ieee80211_sta_send_associnfo(struct net_device *dev,
struct ieee80211_if_sta *ifsta)
{
@@ -366,6 +388,7 @@ static void ieee80211_set_associated(struct net_device *dev,
struct ieee80211_if_sta *ifsta, int assoc)
{
union iwreq_data wrqu;
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (ifsta->associated == assoc)
return;
@@ -374,9 +397,18 @@ static void ieee80211_set_associated(struct net_device *dev,
if (assoc) {
struct ieee80211_sub_if_data *sdata;
+ struct ieee80211_sta_bss *bss;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (sdata->type != IEEE80211_IF_TYPE_STA)
return;
+
+ bss = ieee80211_rx_bss_get(dev, ifsta->bssid);
+ if (bss) {
+ if (bss->has_erp_value)
+ ieee80211_handle_erp_ie(dev, bss->erp_value);
+ ieee80211_rx_bss_put(dev, bss);
+ }
+
netif_carrier_on(dev);
ifsta->prev_bssid_set = 1;
memcpy(ifsta->prev_bssid, sdata->u.sta.bssid, ETH_ALEN);
@@ -384,6 +416,7 @@ static void ieee80211_set_associated(struct net_device *dev,
ieee80211_sta_send_associnfo(dev, ifsta);
} else {
netif_carrier_off(dev);
+ sdata->use_protection = 0;
memset(wrqu.ap_addr.sa_data, 0, ETH_ALEN);
}
wrqu.ap_addr.sa_family = ARPHRD_ETHER;
@@ -1174,6 +1207,18 @@ static void ieee80211_rx_mgmt_assoc_resp(struct net_device *dev,
return;
}
+ /* it probably doesn't, but if the frame includes an ERP value then
+ * update our stored copy */
+ if (elems.erp_info && elems.erp_info_len >= 1) {
+ struct ieee80211_sta_bss *bss
+ = ieee80211_rx_bss_get(dev, ifsta->bssid);
+ if (bss) {
+ bss->erp_value = elems.erp_info[0];
+ bss->has_erp_value = 1;
+ ieee80211_rx_bss_put(dev, bss);
+ }
+ }
+
printk(KERN_DEBUG "%s: associated\n", dev->name);
ifsta->aid = aid;
ifsta->ap_capab = capab_info;
@@ -1496,6 +1541,12 @@ static void ieee80211_rx_bss_info(struct net_device *dev,
return;
}
+ /* save the ERP value so that it is available at association time */
+ if (elems.erp_info && elems.erp_info_len >= 1) {
+ bss->erp_value = elems.erp_info[0];
+ bss->has_erp_value = 1;
+ }
+
bss->beacon_int = le16_to_cpu(mgmt->u.beacon.beacon_int);
bss->capability = le16_to_cpu(mgmt->u.beacon.capab_info);
if (elems.ssid && elems.ssid_len <= IEEE80211_MAX_SSID_LEN) {
@@ -1611,10 +1662,8 @@ static void ieee80211_rx_mgmt_beacon(struct net_device *dev,
size_t len,
struct ieee80211_rx_status *rx_status)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_sub_if_data *sdata;
struct ieee80211_if_sta *ifsta;
- int use_protection;
size_t baselen;
struct ieee802_11_elems elems;
@@ -1638,23 +1687,8 @@ static void ieee80211_rx_mgmt_beacon(struct net_device *dev,
&elems) == ParseFailed)
return;
- use_protection = 0;
- if (elems.erp_info && elems.erp_info_len >= 1) {
- use_protection =
- (elems.erp_info[0] & ERP_INFO_USE_PROTECTION) != 0;
- }
-
- if (use_protection != !!ifsta->use_protection) {
- if (net_ratelimit()) {
- printk(KERN_DEBUG "%s: CTS protection %s (BSSID="
- MAC_FMT ")\n",
- dev->name,
- use_protection ? "enabled" : "disabled",
- MAC_ARG(ifsta->bssid));
- }
- ifsta->use_protection = use_protection ? 1 : 0;
- local->cts_protect_erp_frames = use_protection;
- }
+ if (elems.erp_info && elems.erp_info_len >= 1)
+ ieee80211_handle_erp_ie(dev, elems.erp_info[0]);
if (elems.wmm_param && ifsta->wmm_enabled) {
ieee80211_sta_wmm_params(dev, ifsta, elems.wmm_param,
diff --git a/net/mac80211/rc80211_simple.c b/net/mac80211/rc80211_simple.c
index 5ae7fc4..f6780d6 100644
--- a/net/mac80211/rc80211_simple.c
+++ b/net/mac80211/rc80211_simple.c
@@ -187,9 +187,13 @@ static void rate_control_simple_tx_status(void *priv, struct net_device *dev,
}
#endif
- if (per_failed > local->rate_ctrl_num_down) {
+ /*
+ * XXX: Make these configurable once we have an
+ * interface to the rate control algorithms
+ */
+ if (per_failed > RATE_CONTROL_NUM_DOWN) {
rate_control_rate_dec(local, sta);
- } else if (per_failed < local->rate_ctrl_num_up) {
+ } else if (per_failed < RATE_CONTROL_NUM_UP) {
rate_control_rate_inc(local, sta);
}
srctrl->tx_avg_rate_sum += status->control.rate->rate;
diff --git a/net/wireless/Makefile b/net/wireless/Makefile
index 3a96ae6..092116e 100644
--- a/net/wireless/Makefile
+++ b/net/wireless/Makefile
@@ -1,4 +1,4 @@
obj-$(CONFIG_WIRELESS_EXT) += wext.o
obj-$(CONFIG_CFG80211) += cfg80211.o
-cfg80211-y += core.o sysfs.o
+cfg80211-y += core.o sysfs.o radiotap.o
diff --git a/net/wireless/radiotap.c b/net/wireless/radiotap.c
new file mode 100644
index 0000000..68c11d0
--- /dev/null
+++ b/net/wireless/radiotap.c
@@ -0,0 +1,257 @@
+/*
+ * Radiotap parser
+ *
+ * Copyright 2007 Andy Green <andy@warmcat.com>
+ */
+
+#include <net/cfg80211.h>
+#include <net/ieee80211_radiotap.h>
+#include <asm/unaligned.h>
+
+/* function prototypes and related defs are in include/net/cfg80211.h */
+
+/**
+ * ieee80211_radiotap_iterator_init - radiotap parser iterator initialization
+ * @iterator: radiotap_iterator to initialize
+ * @radiotap_header: radiotap header to parse
+ * @max_length: total length we can parse into (eg, whole packet length)
+ *
+ * Returns: 0 or a negative error code if there is a problem.
+ *
+ * This function initializes an opaque iterator struct which can then
+ * be passed to ieee80211_radiotap_iterator_next() to visit every radiotap
+ * argument which is present in the header. It knows about extended
+ * present headers and handles them.
+ *
+ * How to use:
+ * call __ieee80211_radiotap_iterator_init() to init a semi-opaque iterator
+ * struct ieee80211_radiotap_iterator (no need to init the struct beforehand)
+ * checking for a good 0 return code. Then loop calling
+ * __ieee80211_radiotap_iterator_next()... it returns either 0,
+ * -ENOENT if there are no more args to parse, or -EINVAL if there is a problem.
+ * The iterator's @this_arg member points to the start of the argument
+ * associated with the current argument index that is present, which can be
+ * found in the iterator's @this_arg_index member. This arg index corresponds
+ * to the IEEE80211_RADIOTAP_... defines.
+ *
+ * Radiotap header length:
+ * You can find the CPU-endian total radiotap header length in
+ * iterator->max_length after executing ieee80211_radiotap_iterator_init()
+ * successfully.
+ *
+ * Alignment Gotcha:
+ * You must take care when dereferencing iterator.this_arg
+ * for multibyte types... the pointer is not aligned. Use
+ * get_unaligned((type *)iterator.this_arg) to dereference
+ * iterator.this_arg for type "type" safely on all arches.
+ *
+ * Example code:
+ * See Documentation/networking/radiotap-headers.txt
+ */
+
+int ieee80211_radiotap_iterator_init(
+ struct ieee80211_radiotap_iterator *iterator,
+ struct ieee80211_radiotap_header *radiotap_header,
+ int max_length)
+{
+ /* Linux only supports version 0 radiotap format */
+ if (radiotap_header->it_version)
+ return -EINVAL;
+
+ /* sanity check for allowed length and radiotap length field */
+ if (max_length < le16_to_cpu(get_unaligned(&radiotap_header->it_len)))
+ return -EINVAL;
+
+ iterator->rtheader = radiotap_header;
+ iterator->max_length = le16_to_cpu(get_unaligned(
+ &radiotap_header->it_len));
+ iterator->arg_index = 0;
+ iterator->bitmap_shifter = le32_to_cpu(get_unaligned(
+ &radiotap_header->it_present));
+ iterator->arg = (u8 *)radiotap_header + sizeof(*radiotap_header);
+ iterator->this_arg = NULL;
+
+ /* find payload start allowing for extended bitmap(s) */
+
+ if (unlikely(iterator->bitmap_shifter & (1<<IEEE80211_RADIOTAP_EXT))) {
+ while (le32_to_cpu(get_unaligned((__le32 *)iterator->arg)) &
+ (1<<IEEE80211_RADIOTAP_EXT)) {
+ iterator->arg += sizeof(u32);
+
+ /*
+ * check for insanity where the present bitmaps
+ * keep claiming to extend up to or even beyond the
+ * stated radiotap header length
+ */
+
+ if (((ulong)iterator->arg -
+ (ulong)iterator->rtheader) > iterator->max_length)
+ return -EINVAL;
+ }
+
+ iterator->arg += sizeof(u32);
+
+ /*
+ * no need to check again for blowing past stated radiotap
+ * header length, because ieee80211_radiotap_iterator_next
+ * checks it before it is dereferenced
+ */
+ }
+
+ /* we are all initialized happily */
+
+ return 0;
+}
+EXPORT_SYMBOL(ieee80211_radiotap_iterator_init);
+
+
+/**
+ * ieee80211_radiotap_iterator_next - return next radiotap parser iterator arg
+ * @iterator: radiotap_iterator to move to next arg (if any)
+ *
+ * Returns: 0 if there is an argument to handle,
+ * -ENOENT if there are no more args or -EINVAL
+ * if there is something else wrong.
+ *
+ * This function provides the next radiotap arg index (IEEE80211_RADIOTAP_*)
+ * in @this_arg_index and sets @this_arg to point to the
+ * payload for the field. It takes care of alignment handling and extended
+ * present fields. @this_arg can be changed by the caller (eg,
+ * incremented to move inside a compound argument like
+ * IEEE80211_RADIOTAP_CHANNEL). The args pointed to are in
+ * little-endian format whatever the endianess of your CPU.
+ *
+ * Alignment Gotcha:
+ * You must take care when dereferencing iterator.this_arg
+ * for multibyte types... the pointer is not aligned. Use
+ * get_unaligned((type *)iterator.this_arg) to dereference
+ * iterator.this_arg for type "type" safely on all arches.
+ */
+
+int ieee80211_radiotap_iterator_next(
+ struct ieee80211_radiotap_iterator *iterator)
+{
+
+ /*
+ * small length lookup table for all radiotap types we heard of
+ * starting from b0 in the bitmap, so we can walk the payload
+ * area of the radiotap header
+ *
+ * There is a requirement to pad args, so that args
+ * of a given length must begin at a boundary of that length
+ * -- but note that compound args are allowed (eg, 2 x u16
+ * for IEEE80211_RADIOTAP_CHANNEL) so total arg length is not
+ * a reliable indicator of alignment requirement.
+ *
+ * upper nybble: content alignment for arg
+ * lower nybble: content length for arg
+ */
+
+ static const u8 rt_sizes[] = {
+ [IEEE80211_RADIOTAP_TSFT] = 0x88,
+ [IEEE80211_RADIOTAP_FLAGS] = 0x11,
+ [IEEE80211_RADIOTAP_RATE] = 0x11,
+ [IEEE80211_RADIOTAP_CHANNEL] = 0x24,
+ [IEEE80211_RADIOTAP_FHSS] = 0x22,
+ [IEEE80211_RADIOTAP_DBM_ANTSIGNAL] = 0x11,
+ [IEEE80211_RADIOTAP_DBM_ANTNOISE] = 0x11,
+ [IEEE80211_RADIOTAP_LOCK_QUALITY] = 0x22,
+ [IEEE80211_RADIOTAP_TX_ATTENUATION] = 0x22,
+ [IEEE80211_RADIOTAP_DB_TX_ATTENUATION] = 0x22,
+ [IEEE80211_RADIOTAP_DBM_TX_POWER] = 0x11,
+ [IEEE80211_RADIOTAP_ANTENNA] = 0x11,
+ [IEEE80211_RADIOTAP_DB_ANTSIGNAL] = 0x11,
+ [IEEE80211_RADIOTAP_DB_ANTNOISE] = 0x11
+ /*
+ * add more here as they are defined in
+ * include/net/ieee80211_radiotap.h
+ */
+ };
+
+ /*
+ * for every radiotap entry we can at
+ * least skip (by knowing the length)...
+ */
+
+ while (iterator->arg_index < sizeof(rt_sizes)) {
+ int hit = 0;
+ int pad;
+
+ if (!(iterator->bitmap_shifter & 1))
+ goto next_entry; /* arg not present */
+
+ /*
+ * arg is present, account for alignment padding
+ * 8-bit args can be at any alignment
+ * 16-bit args must start on 16-bit boundary
+ * 32-bit args must start on 32-bit boundary
+ * 64-bit args must start on 64-bit boundary
+ *
+ * note that total arg size can differ from alignment of
+ * elements inside arg, so we use upper nybble of length
+ * table to base alignment on
+ *
+ * also note: these alignments are ** relative to the
+ * start of the radiotap header **. There is no guarantee
+ * that the radiotap header itself is aligned on any
+ * kind of boundary.
+ *
+ * the above is why get_unaligned() is used to dereference
+ * multibyte elements from the radiotap area
+ */
+
+ pad = (((ulong)iterator->arg) -
+ ((ulong)iterator->rtheader)) &
+ ((rt_sizes[iterator->arg_index] >> 4) - 1);
+
+ if (pad)
+ iterator->arg +=
+ (rt_sizes[iterator->arg_index] >> 4) - pad;
+
+ /*
+ * this is what we will return to user, but we need to
+ * move on first so next call has something fresh to test
+ */
+ iterator->this_arg_index = iterator->arg_index;
+ iterator->this_arg = iterator->arg;
+ hit = 1;
+
+ /* internally move on the size of this arg */
+ iterator->arg += rt_sizes[iterator->arg_index] & 0x0f;
+
+ /*
+ * check for insanity where we are given a bitmap that
+ * claims to have more arg content than the length of the
+ * radiotap section. We will normally end up equalling this
+ * max_length on the last arg, never exceeding it.
+ */
+
+ if (((ulong)iterator->arg - (ulong)iterator->rtheader) >
+ iterator->max_length)
+ return -EINVAL;
+
+ next_entry:
+ iterator->arg_index++;
+ if (unlikely((iterator->arg_index & 31) == 0)) {
+ /* completed current u32 bitmap */
+ if (iterator->bitmap_shifter & 1) {
+ /* b31 was set, there is more */
+ /* move to next u32 bitmap */
+ iterator->bitmap_shifter = le32_to_cpu(
+ get_unaligned(iterator->next_bitmap));
+ iterator->next_bitmap++;
+ } else
+ /* no more bitmaps: end */
+ iterator->arg_index = sizeof(rt_sizes);
+ } else /* just try the next bit */
+ iterator->bitmap_shifter >>= 1;
+
+ /* if we found a valid arg earlier, return it now */
+ if (hit)
+ return 0;
+ }
+
+ /* we don't know how to handle any more args, we're done */
+ return -ENOENT;
+}
+EXPORT_SYMBOL(ieee80211_radiotap_iterator_next);
OpenPOWER on IntegriCloud