summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--arch/sh/Kconfig1
-rw-r--r--arch/sh/configs/shx3_defconfig756
-rw-r--r--arch/sh/kernel/cpu/sh3/entry.S19
-rw-r--r--arch/sh/kernel/cpu/sh4/probe.c8
-rw-r--r--arch/sh/kernel/cpu/sh4a/Makefile2
-rw-r--r--arch/sh/kernel/cpu/sh4a/clock-shx3.c135
-rw-r--r--arch/sh/kernel/cpu/sh4a/setup-shx3.c85
-rw-r--r--arch/sh/kernel/setup.c2
-rw-r--r--arch/sh/kernel/timers/timer-tmu.c7
-rw-r--r--arch/sh/mm/Kconfig9
-rw-r--r--drivers/serial/sh-sci.c4
-rw-r--r--drivers/serial/sh-sci.h25
-rw-r--r--include/asm-sh/bugs.h2
-rw-r--r--include/asm-sh/cpu-sh4/freq.h2
-rw-r--r--include/asm-sh/cpu-sh4/timer.h57
-rw-r--r--include/asm-sh/processor.h2
16 files changed, 1083 insertions, 33 deletions
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index b16407c..d82caff 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -598,6 +598,7 @@ config NR_CPUS
int "Maximum number of CPUs (2-32)"
range 2 32
depends on SMP
+ default "4" if CPU_SHX3
default "2"
help
This allows you to specify the maximum number of CPUs which this
diff --git a/arch/sh/configs/shx3_defconfig b/arch/sh/configs/shx3_defconfig
new file mode 100644
index 0000000..219bad5
--- /dev/null
+++ b/arch/sh/configs/shx3_defconfig
@@ -0,0 +1,756 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.22-rc4
+# Wed Jun 20 14:09:27 2007
+#
+CONFIG_SUPERH=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_UTS_NS is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+
+#
+# System type
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+CONFIG_CPU_SHX3=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
+# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+CONFIG_CPU_SUBTYPE_SHX3=y
+# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_HUGETLB_PAGE_SIZE_64K=y
+# CONFIG_HUGETLB_PAGE_SIZE_256K is not set
+# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+# CONFIG_SH_WRITETHROUGH is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+# CONFIG_SH_FPU is not set
+# CONFIG_SH_FPU_EMU is not set
+CONFIG_SH_DSP=y
+CONFIG_SH_STORE_QUEUES=y
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_INTC2_IRQ=y
+CONFIG_CPU_HAS_SR_RB=y
+
+#
+# Board support
+#
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
+CONFIG_SH_PCLK_FREQ=50000000
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_KEXEC=y
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_PREEMPT_BKL=y
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+# CONFIG_UBC_WAKEUP is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttySC0,115200 ip=192.168.1.2:::255.255.255.0 root=/dev/nfs nfsroot=192.168.1.1:/exports/devel/rfs/mobiler noaliencache earlyprintk=bios ignore_loglevel"
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# Misc devices
+#
+# CONFIG_BLINK is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_PATA_PLATFORM=y
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# ISDN subsystem
+#
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=2
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+# CONFIG_HWMON is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# HID Devices
+#
+# CONFIG_HID is not set
+
+#
+# USB support
+#
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SH=y
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Profiling support
+#
+CONFIG_PROFILING=y
+# CONFIG_OPROFILE is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_PRINTK_TIME=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+CONFIG_DEBUG_SLAB=y
+CONFIG_DEBUG_SLAB_LEAK=y
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_LOCK_ALLOC=y
+# CONFIG_PROVE_LOCKING is not set
+CONFIG_LOCKDEP=y
+CONFIG_DEBUG_LOCKDEP=y
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+CONFIG_DEBUG_VM=y
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+CONFIG_SH_STANDARD_BIOS=y
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+CONFIG_EARLY_PRINTK=y
+# CONFIG_DEBUG_BOOTMEM is not set
+CONFIG_DEBUG_STACKOVERFLOW=y
+CONFIG_DEBUG_STACK_USAGE=y
+# CONFIG_4KSTACKS is not set
+# CONFIG_SH_KGDB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S
index b0b59d4..d8e1229 100644
--- a/arch/sh/kernel/cpu/sh3/entry.S
+++ b/arch/sh/kernel/cpu/sh3/entry.S
@@ -340,8 +340,27 @@ ENTRY(vbr_base)
general_exception:
mov.l 1f, k2
mov.l 2f, k3
+#ifdef CONFIG_CPU_SUBTYPE_SHX3
+ mov.l @k2, k2
+
+ ! Is EXPEVT larger than 0x800?
+ mov #0x8, k0
+ shll8 k0
+ cmp/hs k0, k2
+ bf 0f
+
+ ! then add 0x580 (k2 is 0xd80 or 0xda0)
+ mov #0x58, k0
+ shll2 k0
+ shll2 k0
+ add k0, k2
+0:
+ bra handle_exception
+ nop
+#else
bra handle_exception
mov.l @k2, k2
+#endif
.align 2
1: .long EXPEVT
2: .long ret_from_exception
diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c
index fab2eb0..66c3f75 100644
--- a/arch/sh/kernel/cpu/sh4/probe.c
+++ b/arch/sh/kernel/cpu/sh4/probe.c
@@ -141,6 +141,14 @@ int __init detect_cpu_and_cache_system(void)
current_cpu_data.flags |= CPU_HAS_LLSC;
}
break;
+ case 0x4000: /* 1st cut */
+ case 0x4001: /* 2nd cut */
+ current_cpu_data.type = CPU_SHX3;
+ current_cpu_data.icache.ways = 4;
+ current_cpu_data.dcache.ways = 4;
+ current_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_PERF_COUNTER |
+ CPU_HAS_LLSC;
+ break;
case 0x8000:
current_cpu_data.type = CPU_ST40RA;
current_cpu_data.flags |= CPU_HAS_FPU;
diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile
index ab7422f..4006232 100644
--- a/arch/sh/kernel/cpu/sh4a/Makefile
+++ b/arch/sh/kernel/cpu/sh4a/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7785) += setup-sh7785.o
obj-$(CONFIG_CPU_SUBTYPE_SH73180) += setup-sh73180.o
obj-$(CONFIG_CPU_SUBTYPE_SH7343) += setup-sh7343.o
obj-$(CONFIG_CPU_SUBTYPE_SH7722) += setup-sh7722.o
+obj-$(CONFIG_CPU_SUBTYPE_SHX3) += setup-shx3.o
# Primary on-chip clocks (common)
clock-$(CONFIG_CPU_SUBTYPE_SH73180) := clock-sh73180.o
@@ -17,5 +18,6 @@ clock-$(CONFIG_CPU_SUBTYPE_SH7780) := clock-sh7780.o
clock-$(CONFIG_CPU_SUBTYPE_SH7785) := clock-sh7785.o
clock-$(CONFIG_CPU_SUBTYPE_SH7343) := clock-sh7343.o
clock-$(CONFIG_CPU_SUBTYPE_SH7722) := clock-sh7722.o
+clock-$(CONFIG_CPU_SUBTYPE_SHX3) := clock-shx3.o
obj-y += $(clock-y)
diff --git a/arch/sh/kernel/cpu/sh4a/clock-shx3.c b/arch/sh/kernel/cpu/sh4a/clock-shx3.c
new file mode 100644
index 0000000..c630b29
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4a/clock-shx3.c
@@ -0,0 +1,135 @@
+/*
+ * arch/sh/kernel/cpu/sh4/clock-shx3.c
+ *
+ * SH-X3 support for the clock framework
+ *
+ * Copyright (C) 2006-2007 Renesas Technology Corp.
+ * Copyright (C) 2006-2007 Renesas Solutions Corp.
+ * Copyright (C) 2006-2007 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+#include <asm/io.h>
+
+static int ifc_divisors[] = { 1, 2, 4 ,6 };
+static int bfc_divisors[] = { 1, 1, 1, 1, 1, 12, 16, 18, 24, 32, 36, 48 };
+static int pfc_divisors[] = { 1, 1, 1, 1, 1, 1, 1, 18, 24, 32, 36, 48 };
+static int cfc_divisors[] = { 1, 1, 4, 6 };
+
+#define IFC_POS 28
+#define IFC_MSK 0x0003
+#define BFC_MSK 0x000f
+#define PFC_MSK 0x000f
+#define CFC_MSK 0x0003
+#define BFC_POS 16
+#define PFC_POS 0
+#define CFC_POS 20
+
+static void master_clk_init(struct clk *clk)
+{
+ clk->rate *= pfc_divisors[(ctrl_inl(FRQCR) >> PFC_POS) & PFC_MSK];
+}
+
+static struct clk_ops shx3_master_clk_ops = {
+ .init = master_clk_init,
+};
+
+static void module_clk_recalc(struct clk *clk)
+{
+ int idx = ((ctrl_inl(FRQCR) >> PFC_POS) & PFC_MSK);
+ clk->rate = clk->parent->rate / pfc_divisors[idx];
+}
+
+static struct clk_ops shx3_module_clk_ops = {
+ .recalc = module_clk_recalc,
+};
+
+static void bus_clk_recalc(struct clk *clk)
+{
+ int idx = ((ctrl_inl(FRQCR) >> BFC_POS) & BFC_MSK);
+ clk->rate = clk->parent->rate / bfc_divisors[idx];
+}
+
+static struct clk_ops shx3_bus_clk_ops = {
+ .recalc = bus_clk_recalc,
+};
+
+static void cpu_clk_recalc(struct clk *clk)
+{
+ int idx = ((ctrl_inl(FRQCR) >> IFC_POS) & IFC_MSK);
+ clk->rate = clk->parent->rate / ifc_divisors[idx];
+}
+
+static struct clk_ops shx3_cpu_clk_ops = {
+ .recalc = cpu_clk_recalc,
+};
+
+static struct clk_ops *shx3_clk_ops[] = {
+ &shx3_master_clk_ops,
+ &shx3_module_clk_ops,
+ &shx3_bus_clk_ops,
+ &shx3_cpu_clk_ops,
+};
+
+void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+{
+ if (idx < ARRAY_SIZE(shx3_clk_ops))
+ *ops = shx3_clk_ops[idx];
+}
+
+static void shyway_clk_recalc(struct clk *clk)
+{
+ int idx = ((ctrl_inl(FRQCR) >> CFC_POS) & CFC_MSK);
+ clk->rate = clk->parent->rate / cfc_divisors[idx];
+}
+
+static struct clk_ops shx3_shyway_clk_ops = {
+ .recalc = shyway_clk_recalc,
+};
+
+static struct clk shx3_shyway_clk = {
+ .name = "shyway_clk",
+ .flags = CLK_ALWAYS_ENABLED,
+ .ops = &shx3_shyway_clk_ops,
+};
+
+/*
+ * Additional SHx3-specific on-chip clocks that aren't already part of the
+ * clock framework
+ */
+static struct clk *shx3_onchip_clocks[] = {
+ &shx3_shyway_clk,
+};
+
+static int __init shx3_clk_init(void)
+{
+ struct clk *clk = clk_get(NULL, "master_clk");
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(shx3_onchip_clocks); i++) {
+ struct clk *clkp = shx3_onchip_clocks[i];
+
+ clkp->parent = clk;
+ clk_register(clkp);
+ clk_enable(clkp);
+ }
+
+ /*
+ * Now that we have the rest of the clocks registered, we need to
+ * force the parent clock to propagate so that these clocks will
+ * automatically figure out their rate. We cheat by handing the
+ * parent clock its current rate and forcing child propagation.
+ */
+ clk_set_rate(clk, clk_get_rate(clk));
+
+ clk_put(clk);
+
+ return 0;
+}
+arch_initcall(shx3_clk_init);
diff --git a/arch/sh/kernel/cpu/sh4a/setup-shx3.c b/arch/sh/kernel/cpu/sh4a/setup-shx3.c
new file mode 100644
index 0000000..70683ea
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4a/setup-shx3.c
@@ -0,0 +1,85 @@
+/*
+ * SH-X3 Setup
+ *
+ * Copyright (C) 2007 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/io.h>
+#include <asm/sci.h>
+
+static struct plat_sci_port sci_platform_data[] = {
+ {
+ .mapbase = 0xffc30000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 40, 41, 43, 42 },
+ }, {
+ .mapbase = 0xffc40000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 44, 45, 47, 46 },
+ }, {
+ .mapbase = 0xffc50000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 48, 49, 51, 50 },
+ }, {
+ .mapbase = 0xffc60000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 52, 53, 55, 54 },
+ }, {
+ .flags = 0,
+ }
+};
+
+static struct platform_device sci_device = {
+ .name = "sh-sci",
+ .id = -1,
+ .dev = {
+ .platform_data = sci_platform_data,
+ },
+};
+
+static struct platform_device *shx3_devices[] __initdata = {
+ &sci_device,
+};
+
+static int __init shx3_devices_setup(void)
+{
+ return platform_add_devices(shx3_devices,
+ ARRAY_SIZE(shx3_devices));
+}
+__initcall(shx3_devices_setup);
+
+static struct intc2_data intc2_irq_table[] = {
+ { 16, 0, 0, 0, 1, 2 }, /* TMU0 */
+ { 40, 4, 0, 0x20, 0, 3 }, /* SCIF0 ERI */
+ { 41, 4, 0, 0x20, 1, 3 }, /* SCIF0 RXI */
+ { 42, 4, 0, 0x20, 2, 3 }, /* SCIF0 BRI */
+ { 43, 4, 0, 0x20, 3, 3 }, /* SCIF0 TXI */
+};
+
+static struct intc2_desc intc2_irq_desc __read_mostly = {
+ .prio_base = 0xfe410000,
+ .msk_base = 0xfe410820,
+ .mskclr_base = 0xfe410850,
+
+ .intc2_data = intc2_irq_table,
+ .nr_irqs = ARRAY_SIZE(intc2_irq_table),
+
+ .chip = {
+ .name = "INTC2-SHX3",
+ },
+};
+
+void __init init_IRQ_intc2(void)
+{
+ register_intc2_controller(&intc2_irq_desc);
+}
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index 765f83c..de8e6e2 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -285,7 +285,7 @@ static const char *cpu_name[] = {
[CPU_SH7770] = "SH7770", [CPU_SH7780] = "SH7780",
[CPU_SH7781] = "SH7781", [CPU_SH7343] = "SH7343",
[CPU_SH7785] = "SH7785", [CPU_SH7722] = "SH7722",
- [CPU_SH_NONE] = "Unknown"
+ [CPU_SHX3] = "SH-X3", [CPU_SH_NONE] = "Unknown"
};
const char *get_cpu_subtype(struct sh_cpuinfo *c)
diff --git a/arch/sh/kernel/timers/timer-tmu.c b/arch/sh/kernel/timers/timer-tmu.c
index 2d997e2..097ebd4 100644
--- a/arch/sh/kernel/timers/timer-tmu.c
+++ b/arch/sh/kernel/timers/timer-tmu.c
@@ -30,7 +30,7 @@
static int tmu_timer_start(void)
{
- ctrl_outb(ctrl_inb(TMU_TSTR) | 0x3, TMU_TSTR);
+ ctrl_outb(ctrl_inb(TMU_012_TSTR) | 0x3, TMU_012_TSTR);
return 0;
}
@@ -52,7 +52,7 @@ static void tmu0_timer_set_interval(unsigned long interval, unsigned int reload)
static int tmu_timer_stop(void)
{
- ctrl_outb(ctrl_inb(TMU_TSTR) & ~0x3, TMU_TSTR);
+ ctrl_outb(ctrl_inb(TMU_012_TSTR) & ~0x3, TMU_012_TSTR);
return 0;
}
@@ -174,7 +174,8 @@ static int tmu_timer_init(void)
#if !defined(CONFIG_CPU_SUBTYPE_SH7300) && \
!defined(CONFIG_CPU_SUBTYPE_SH7760) && \
- !defined(CONFIG_CPU_SUBTYPE_SH7785)
+ !defined(CONFIG_CPU_SUBTYPE_SH7785) && \
+ !defined(CONFIG_CPU_SUBTYPE_SHX3)
ctrl_outb(TMU_TOCR_INIT, TMU_TOCR);
#endif
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index 6fc5550..ea1d271 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -36,6 +36,9 @@ config CPU_SUBTYPE_ST40
config CPU_SHX2
bool
+config CPU_SHX3
+ bool
+
choice
prompt "Processor sub-type selection"
@@ -193,6 +196,12 @@ config CPU_SUBTYPE_SH7785
select CPU_SHX2
select CPU_HAS_INTC2_IRQ
+config CPU_SUBTYPE_SHX3
+ bool "Support SH-X3 processor"
+ select CPU_SH4A
+ select CPU_SHX3
+ select CPU_HAS_INTC2_IRQ
+
# SH4AL-DSP Processor Support
config CPU_SUBTYPE_SH73180
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 1f89496..672cd10 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -367,7 +367,9 @@ static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
} else {
#ifdef CONFIG_CPU_SUBTYPE_SH7343
/* Nothing */
-#elif defined(CONFIG_CPU_SUBTYPE_SH7780) || defined(CONFIG_CPU_SUBTYPE_SH7785)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7780) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7785) || \
+ defined(CONFIG_CPU_SUBTYPE_SHX3)
ctrl_outw(0x0080, SCSPTR0); /* Set RTS = 1 */
#else
ctrl_outw(0x0080, SCSPTR2); /* Set RTS = 1 */
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index da643b3..247fb66 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -78,7 +78,7 @@
# define SCPDR 0xA4050136 /* 16 bit SCIF */
# define SCSCR_INIT(port) 0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */
# define SCIF_ONLY
-#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
# define SCSPTR0 0xA4400000 /* 16 bit SCIF */
# define SCI_NPORTS 2
# define SCIF_ORER 0x0001 /* overrun error bit */
@@ -173,6 +173,14 @@
# define SCIF_ORER 0x0001 /* overrun error bit */
# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
# define SCIF_ONLY
+#elif defined(CONFIG_CPU_SUBTYPE_SHX3)
+# define SCSPTR0 0xffc30020 /* 16 bit SCIF */
+# define SCSPTR1 0xffc40020 /* 16 bit SCIF */
+# define SCSPTR2 0xffc50020 /* 16 bit SCIF */
+# define SCSPTR3 0xffc60020 /* 16 bit SCIF */
+# define SCIF_ORER 0x0001 /* Overrun error bit */
+# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
+# define SCIF_ONLY
#else
# error CPU subtype not defined
#endif
@@ -189,7 +197,8 @@
defined(CONFIG_CPU_SUBTYPE_SH7751) || \
defined(CONFIG_CPU_SUBTYPE_SH7751R) || \
defined(CONFIG_CPU_SUBTYPE_SH7780) || \
- defined(CONFIG_CPU_SUBTYPE_SH7785)
+ defined(CONFIG_CPU_SUBTYPE_SH7785) || \
+ defined(CONFIG_CPU_SUBTYPE_SHX3)
#define SCI_CTRL_FLAGS_REIE 0x08 /* 7750 SCIF */
#else
#define SCI_CTRL_FLAGS_REIE 0
@@ -666,6 +675,18 @@ static inline int sci_rxd_in(struct uart_port *port)
return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
return 1;
}
+#elif defined(CONFIG_CPU_SUBTYPE_SHX3)
+static inline int sci_rxd_in(struct uart_port *port)
+{
+ if (port->mapbase == 0xffc30000)
+ return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
+ if (port->mapbase == 0xffc40000)
+ return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
+ if (port->mapbase == 0xffc50000)
+ return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
+ if (port->mapbase == 0xffc60000)
+ return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
+}
#endif
/*
diff --git a/include/asm-sh/bugs.h b/include/asm-sh/bugs.h
index efc8fd3..aeee8da 100644
--- a/include/asm-sh/bugs.h
+++ b/include/asm-sh/bugs.h
@@ -35,7 +35,7 @@ static void __init check_bugs(void)
case CPU_SH7750 ... CPU_SH4_501:
*p++ = '4';
break;
- case CPU_SH7770 ... CPU_SH7785:
+ case CPU_SH7770 ... CPU_SHX3:
*p++ = '4';
*p++ = 'a';
break;
diff --git a/include/asm-sh/cpu-sh4/freq.h b/include/asm-sh/cpu-sh4/freq.h
index 39f41fc..026025b 100644
--- a/include/asm-sh/cpu-sh4/freq.h
+++ b/include/asm-sh/cpu-sh4/freq.h
@@ -22,6 +22,8 @@
#define FRQCR0 0xffc80000
#define FRQCR1 0xffc80004
#define FRQMR1 0xffc80014
+#elif defined(CONFIG_CPU_SUBTYPE_SHX3)
+#define FRQCR 0xffc00014
#else
#define FRQCR 0xffc00000
#define FRQCR_PSTBY 0x0200
diff --git a/include/asm-sh/cpu-sh4/timer.h b/include/asm-sh/cpu-sh4/timer.h
index 8a4af126c..d1e796b 100644
--- a/include/asm-sh/cpu-sh4/timer.h
+++ b/include/asm-sh/cpu-sh4/timer.h
@@ -1,7 +1,7 @@
/*
* include/asm-sh/cpu-sh4/timer.h
*
- * Copyright (C) 2004 Lineo Solutions, Inc.
+ * Copyright (C) 2004 Lineo Solutions, Inc.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
@@ -16,36 +16,45 @@
* SH7750S/SH7750R
* SH7751/SH7751R
* SH7760
+ * SH-X3
* ---------------------------------------------------------------------------
*/
-
-#if !defined(CONFIG_CPU_SUBTYPE_SH7760)
-#define TMU_TOCR 0xffd80000 /* Byte access */
+#ifdef CONFIG_CPU_SUBTYPE_SHX3
+#define TMU_012_BASE 0xffc10000
+#define TMU_345_BASE 0xffc20000
+#else
+#define TMU_012_BASE 0xffd80000
+#define TMU_345_BASE 0xfe100000
#endif
-#define TMU_TSTR 0xffd80004 /* Byte access */
-#define TMU0_TCOR 0xffd80008 /* Long access */
-#define TMU0_TCNT 0xffd8000c /* Long access */
-#define TMU0_TCR 0xffd80010 /* Word access */
+#define TMU_TOCR TMU_012_BASE /* Not supported on all CPUs */
-#define TMU1_TCOR 0xffd80014 /* Long access */
-#define TMU1_TCNT 0xffd80018 /* Long access */
-#define TMU1_TCR 0xffd8001c /* Word access */
+#define TMU_012_TSTR (TMU_012_BASE + 0x04)
+#define TMU_345_TSTR (TMU_345_BASE + 0x04)
-#define TMU2_TCOR 0xffd80020 /* Long access */
-#define TMU2_TCNT 0xffd80024 /* Long access */
-#define TMU2_TCR 0xffd80028 /* Word access */
-#define TMU2_TCPR 0xffd8002c /* Long access */
+#define TMU0_TCOR (TMU_012_BASE + 0x08)
+#define TMU0_TCNT (TMU_012_BASE + 0x0c)
+#define TMU0_TCR (TMU_012_BASE + 0x10)
-#if !defined(CONFIG_CPU_SUBTYPE_SH7760)
-#define TMU3_TCOR 0xfe100008 /* Long access */
-#define TMU3_TCNT 0xfe10000c /* Long access */
-#define TMU3_TCR 0xfe100010 /* Word access */
+#define TMU1_TCOR (TMU_012_BASE + 0x14)
+#define TMU1_TCNT (TMU_012_BASE + 0x18)
+#define TMU1_TCR (TMU_012_BASE + 0x1c)
-#define TMU4_TCOR 0xfe100014 /* Long access */
-#define TMU4_TCNT 0xfe100018 /* Long access */
-#define TMU4_TCR 0xfe10001c /* Word access */
-#endif
+#define TMU2_TCOR (TMU_012_BASE + 0x20)
+#define TMU2_TCNT (TMU_012_BASE + 0x24)
+#define TMU2_TCR (TMU_012_BASE + 0x28)
+#define TMU2_TCPR (TMU_012_BASE + 0x2c)
-#endif /* __ASM_CPU_SH4_TIMER_H */
+#define TMU3_TCOR (TMU_345_BASE + 0x08)
+#define TMU3_TCNT (TMU_345_BASE + 0x0c)
+#define TMU3_TCR (TMU_345_BASE + 0x10)
+#define TMU4_TCOR (TMU_345_BASE + 0x14)
+#define TMU4_TCNT (TMU_345_BASE + 0x18)
+#define TMU4_TCR (TMU_345_BASE + 0x1c)
+
+#define TMU5_TCOR (TMU_345_BASE + 0x20)
+#define TMU5_TCNT (TMU_345_BASE + 0x24)
+#define TMU5_TCR (TMU_345_BASE + 0x28)
+
+#endif /* __ASM_CPU_SH4_TIMER_H */
diff --git a/include/asm-sh/processor.h b/include/asm-sh/processor.h
index 1a20db0..2252e75 100644
--- a/include/asm-sh/processor.h
+++ b/include/asm-sh/processor.h
@@ -52,7 +52,7 @@ enum cpu_type {
CPU_SH7760, CPU_ST40RA, CPU_ST40GX1, CPU_SH4_202, CPU_SH4_501,
/* SH-4A types */
- CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785,
+ CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785, CPU_SHX3,
/* SH4AL-DSP types */
CPU_SH73180, CPU_SH7343, CPU_SH7722,
OpenPOWER on IntegriCloud