summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/net/Kconfig2
-rw-r--r--drivers/net/Makefile1
-rw-r--r--drivers/net/ixp2000/Kconfig6
-rw-r--r--drivers/net/ixp2000/Makefile3
-rw-r--r--drivers/net/ixp2000/caleb.c136
-rw-r--r--drivers/net/ixp2000/caleb.h22
-rw-r--r--drivers/net/ixp2000/enp2611.c238
-rw-r--r--drivers/net/ixp2000/ixp2400-msf.c213
-rw-r--r--drivers/net/ixp2000/ixp2400-msf.h115
-rw-r--r--drivers/net/ixp2000/ixp2400_rx.uc408
-rw-r--r--drivers/net/ixp2000/ixp2400_rx.ucode130
-rw-r--r--drivers/net/ixp2000/ixp2400_tx.uc272
-rw-r--r--drivers/net/ixp2000/ixp2400_tx.ucode98
-rw-r--r--drivers/net/ixp2000/ixpdev.c404
-rw-r--r--drivers/net/ixp2000/ixpdev.h27
-rw-r--r--drivers/net/ixp2000/ixpdev_priv.h57
-rw-r--r--drivers/net/ixp2000/pm3386.c304
-rw-r--r--drivers/net/ixp2000/pm3386.h26
18 files changed, 2462 insertions, 0 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 39415b5..fca6000 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1901,6 +1901,8 @@ config E1000_NAPI
If in doubt, say N.
+source "drivers/net/ixp2000/Kconfig"
+
config MYRI_SBUS
tristate "MyriCOM Gigabit Ethernet support"
depends on SBUS
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 5056814..b74a7cb 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -206,6 +206,7 @@ obj-$(CONFIG_NET_TULIP) += tulip/
obj-$(CONFIG_HAMRADIO) += hamradio/
obj-$(CONFIG_IRDA) += irda/
obj-$(CONFIG_ETRAX_ETHERNET) += cris/
+obj-$(CONFIG_ENP2611_MSF_NET) += ixp2000/
obj-$(CONFIG_NETCONSOLE) += netconsole.o
diff --git a/drivers/net/ixp2000/Kconfig b/drivers/net/ixp2000/Kconfig
new file mode 100644
index 0000000..2fec241
--- /dev/null
+++ b/drivers/net/ixp2000/Kconfig
@@ -0,0 +1,6 @@
+config ENP2611_MSF_NET
+ tristate "Radisys ENP2611 MSF network interface support"
+ depends on ARCH_ENP2611
+ help
+ This is a driver for the MSF network interface unit in
+ the IXP2400 on the Radisys ENP2611 platform.
diff --git a/drivers/net/ixp2000/Makefile b/drivers/net/ixp2000/Makefile
new file mode 100644
index 0000000..fd38351
--- /dev/null
+++ b/drivers/net/ixp2000/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_ENP2611_MSF_NET) += enp2611_mod.o
+
+enp2611_mod-objs := caleb.o enp2611.o ixp2400-msf.o ixpdev.o pm3386.o
diff --git a/drivers/net/ixp2000/caleb.c b/drivers/net/ixp2000/caleb.c
new file mode 100644
index 0000000..d70530a
--- /dev/null
+++ b/drivers/net/ixp2000/caleb.c
@@ -0,0 +1,136 @@
+/*
+ * Helper functions for the SPI-3 bridge FPGA on the Radisys ENP2611
+ * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
+ * Dedicated to Marija Kulikova.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+
+#define CALEB_IDLO 0x00
+#define CALEB_IDHI 0x01
+#define CALEB_RID 0x02
+#define CALEB_RESET 0x03
+#define CALEB_INTREN0 0x04
+#define CALEB_INTREN1 0x05
+#define CALEB_INTRSTAT0 0x06
+#define CALEB_INTRSTAT1 0x07
+#define CALEB_PORTEN 0x08
+#define CALEB_BURST 0x09
+#define CALEB_PORTPAUS 0x0A
+#define CALEB_PORTPAUSD 0x0B
+#define CALEB_PHY0RX 0x10
+#define CALEB_PHY1RX 0x11
+#define CALEB_PHY0TX 0x12
+#define CALEB_PHY1TX 0x13
+#define CALEB_IXPRX_HI_CNTR 0x15
+#define CALEB_PHY0RX_HI_CNTR 0x16
+#define CALEB_PHY1RX_HI_CNTR 0x17
+#define CALEB_IXPRX_CNTR 0x18
+#define CALEB_PHY0RX_CNTR 0x19
+#define CALEB_PHY1RX_CNTR 0x1A
+#define CALEB_IXPTX_CNTR 0x1B
+#define CALEB_PHY0TX_CNTR 0x1C
+#define CALEB_PHY1TX_CNTR 0x1D
+#define CALEB_DEBUG0 0x1E
+#define CALEB_DEBUG1 0x1F
+
+
+static u8 caleb_reg_read(int reg)
+{
+ u8 value;
+
+ value = *((volatile u8 *)(ENP2611_CALEB_VIRT_BASE + reg));
+
+// printk(KERN_INFO "caleb_reg_read(%d) = %.2x\n", reg, value);
+
+ return value;
+}
+
+static void caleb_reg_write(int reg, u8 value)
+{
+ u8 dummy;
+
+// printk(KERN_INFO "caleb_reg_write(%d, %.2x)\n", reg, value);
+
+ *((volatile u8 *)(ENP2611_CALEB_VIRT_BASE + reg)) = value;
+
+ dummy = *((volatile u8 *)ENP2611_CALEB_VIRT_BASE);
+ __asm__ __volatile__("mov %0, %0" : "+r" (dummy));
+}
+
+
+void caleb_reset(void)
+{
+ /*
+ * Perform a chip reset.
+ */
+ caleb_reg_write(CALEB_RESET, 0x02);
+ udelay(1);
+
+ /*
+ * Enable all interrupt sources. This is needed to get
+ * meaningful results out of the status bits (register 6
+ * and 7.)
+ */
+ caleb_reg_write(CALEB_INTREN0, 0xff);
+ caleb_reg_write(CALEB_INTREN1, 0x07);
+
+ /*
+ * Set RX and TX FIFO thresholds to 1.5kb.
+ */
+ caleb_reg_write(CALEB_PHY0RX, 0x11);
+ caleb_reg_write(CALEB_PHY1RX, 0x11);
+ caleb_reg_write(CALEB_PHY0TX, 0x11);
+ caleb_reg_write(CALEB_PHY1TX, 0x11);
+
+ /*
+ * Program SPI-3 burst size.
+ */
+ caleb_reg_write(CALEB_BURST, 0); // 64-byte RBUF mpackets
+// caleb_reg_write(CALEB_BURST, 1); // 128-byte RBUF mpackets
+// caleb_reg_write(CALEB_BURST, 2); // 256-byte RBUF mpackets
+}
+
+void caleb_enable_rx(int port)
+{
+ u8 temp;
+
+ temp = caleb_reg_read(CALEB_PORTEN);
+ temp |= 1 << port;
+ caleb_reg_write(CALEB_PORTEN, temp);
+}
+
+void caleb_disable_rx(int port)
+{
+ u8 temp;
+
+ temp = caleb_reg_read(CALEB_PORTEN);
+ temp &= ~(1 << port);
+ caleb_reg_write(CALEB_PORTEN, temp);
+}
+
+void caleb_enable_tx(int port)
+{
+ u8 temp;
+
+ temp = caleb_reg_read(CALEB_PORTEN);
+ temp |= 1 << (port + 4);
+ caleb_reg_write(CALEB_PORTEN, temp);
+}
+
+void caleb_disable_tx(int port)
+{
+ u8 temp;
+
+ temp = caleb_reg_read(CALEB_PORTEN);
+ temp &= ~(1 << (port + 4));
+ caleb_reg_write(CALEB_PORTEN, temp);
+}
diff --git a/drivers/net/ixp2000/caleb.h b/drivers/net/ixp2000/caleb.h
new file mode 100644
index 0000000..e93a1ef
--- /dev/null
+++ b/drivers/net/ixp2000/caleb.h
@@ -0,0 +1,22 @@
+/*
+ * Helper functions for the SPI-3 bridge FPGA on the Radisys ENP2611
+ * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
+ * Dedicated to Marija Kulikova.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __CALEB_H
+#define __CALEB_H
+
+void caleb_reset(void);
+void caleb_enable_rx(int port);
+void caleb_disable_rx(int port);
+void caleb_enable_tx(int port);
+void caleb_disable_tx(int port);
+
+
+#endif
diff --git a/drivers/net/ixp2000/enp2611.c b/drivers/net/ixp2000/enp2611.c
new file mode 100644
index 0000000..3262e70
--- /dev/null
+++ b/drivers/net/ixp2000/enp2611.c
@@ -0,0 +1,238 @@
+/*
+ * IXP2400 MSF network device driver for the Radisys ENP2611
+ * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
+ * Dedicated to Marija Kulikova.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/init.h>
+#include <linux/moduleparam.h>
+#include <asm/arch/uengine.h>
+#include <asm/mach-types.h>
+#include <asm/io.h>
+#include "ixpdev.h"
+#include "caleb.h"
+#include "ixp2400-msf.h"
+#include "pm3386.h"
+
+/***********************************************************************
+ * The Radisys ENP2611 is a PCI form factor board with three SFP GBIC
+ * slots, connected via two PMC/Sierra 3386s and an SPI-3 bridge FPGA
+ * to the IXP2400.
+ *
+ * +-------------+
+ * SFP GBIC #0 ---+ | +---------+
+ * | PM3386 #0 +-------+ |
+ * SFP GBIC #1 ---+ | | "Caleb" | +---------+
+ * +-------------+ | | | |
+ * | SPI-3 +---------+ IXP2400 |
+ * +-------------+ | bridge | | |
+ * SFP GBIC #2 ---+ | | FPGA | +---------+
+ * | PM3386 #1 +-------+ |
+ * | | +---------+
+ * +-------------+
+ * ^ ^ ^
+ * | 1.25Gbaud | 104MHz | 104MHz
+ * | SERDES ea. | SPI-3 ea. | SPI-3
+ *
+ ***********************************************************************/
+static struct ixp2400_msf_parameters enp2611_msf_parameters =
+{
+ .rx_mode = IXP2400_RX_MODE_UTOPIA_POS |
+ IXP2400_RX_MODE_1x32 |
+ IXP2400_RX_MODE_MPHY |
+ IXP2400_RX_MODE_MPHY_32 |
+ IXP2400_RX_MODE_MPHY_POLLED_STATUS |
+ IXP2400_RX_MODE_MPHY_LEVEL3 |
+ IXP2400_RX_MODE_RBUF_SIZE_64,
+
+ .rxclk01_multiplier = IXP2400_PLL_MULTIPLIER_16,
+
+ .rx_poll_ports = 3,
+
+ .rx_channel_mode = {
+ IXP2400_PORT_RX_MODE_MASTER |
+ IXP2400_PORT_RX_MODE_POS_PHY |
+ IXP2400_PORT_RX_MODE_POS_PHY_L3 |
+ IXP2400_PORT_RX_MODE_ODD_PARITY |
+ IXP2400_PORT_RX_MODE_2_CYCLE_DECODE,
+
+ IXP2400_PORT_RX_MODE_MASTER |
+ IXP2400_PORT_RX_MODE_POS_PHY |
+ IXP2400_PORT_RX_MODE_POS_PHY_L3 |
+ IXP2400_PORT_RX_MODE_ODD_PARITY |
+ IXP2400_PORT_RX_MODE_2_CYCLE_DECODE,
+
+ IXP2400_PORT_RX_MODE_MASTER |
+ IXP2400_PORT_RX_MODE_POS_PHY |
+ IXP2400_PORT_RX_MODE_POS_PHY_L3 |
+ IXP2400_PORT_RX_MODE_ODD_PARITY |
+ IXP2400_PORT_RX_MODE_2_CYCLE_DECODE,
+
+ IXP2400_PORT_RX_MODE_MASTER |
+ IXP2400_PORT_RX_MODE_POS_PHY |
+ IXP2400_PORT_RX_MODE_POS_PHY_L3 |
+ IXP2400_PORT_RX_MODE_ODD_PARITY |
+ IXP2400_PORT_RX_MODE_2_CYCLE_DECODE
+ },
+
+ .tx_mode = IXP2400_TX_MODE_UTOPIA_POS |
+ IXP2400_TX_MODE_1x32 |
+ IXP2400_TX_MODE_MPHY |
+ IXP2400_TX_MODE_MPHY_32 |
+ IXP2400_TX_MODE_MPHY_POLLED_STATUS |
+ IXP2400_TX_MODE_MPHY_LEVEL3 |
+ IXP2400_TX_MODE_TBUF_SIZE_64,
+
+ .txclk01_multiplier = IXP2400_PLL_MULTIPLIER_16,
+
+ .tx_poll_ports = 3,
+
+ .tx_channel_mode = {
+ IXP2400_PORT_TX_MODE_MASTER |
+ IXP2400_PORT_TX_MODE_POS_PHY |
+ IXP2400_PORT_TX_MODE_ODD_PARITY |
+ IXP2400_PORT_TX_MODE_2_CYCLE_DECODE,
+
+ IXP2400_PORT_TX_MODE_MASTER |
+ IXP2400_PORT_TX_MODE_POS_PHY |
+ IXP2400_PORT_TX_MODE_ODD_PARITY |
+ IXP2400_PORT_TX_MODE_2_CYCLE_DECODE,
+
+ IXP2400_PORT_TX_MODE_MASTER |
+ IXP2400_PORT_TX_MODE_POS_PHY |
+ IXP2400_PORT_TX_MODE_ODD_PARITY |
+ IXP2400_PORT_TX_MODE_2_CYCLE_DECODE,
+
+ IXP2400_PORT_TX_MODE_MASTER |
+ IXP2400_PORT_TX_MODE_POS_PHY |
+ IXP2400_PORT_TX_MODE_ODD_PARITY |
+ IXP2400_PORT_TX_MODE_2_CYCLE_DECODE
+ }
+};
+
+struct enp2611_ixpdev_priv
+{
+ struct ixpdev_priv ixpdev_priv;
+ struct net_device_stats stats;
+};
+
+static struct net_device *nds[3];
+static struct timer_list link_check_timer;
+
+static struct net_device_stats *enp2611_get_stats(struct net_device *dev)
+{
+ struct enp2611_ixpdev_priv *ip = netdev_priv(dev);
+
+ pm3386_get_stats(ip->ixpdev_priv.channel, &(ip->stats));
+
+ return &(ip->stats);
+}
+
+/* @@@ Poll the SFP moddef0 line too. */
+/* @@@ Try to use the pm3386 DOOL interrupt as well. */
+static void enp2611_check_link_status(unsigned long __dummy)
+{
+ int i;
+
+ for (i = 0; i < 3; i++) {
+ struct net_device *dev;
+ int status;
+
+ if (!netif_running(nds[i]))
+ continue;
+
+ dev = nds[i];
+
+ status = pm3386_is_link_up(i);
+ if (status && !netif_carrier_ok(nds[i])) {
+ pm3386_enable_tx(i);
+ caleb_enable_tx(i);
+ netif_carrier_on(nds[i]);
+ } else if (!status && netif_carrier_ok(nds[i])) {
+ netif_carrier_off(nds[i]);
+ caleb_disable_tx(i);
+ pm3386_disable_tx(i);
+ }
+ }
+
+ link_check_timer.expires = jiffies + HZ / 10;
+ add_timer(&link_check_timer);
+}
+
+static void enp2611_set_port_admin_status(int port, int up)
+{
+ if (up) {
+ caleb_enable_rx(port);
+ pm3386_enable_rx(port);
+ } else {
+ caleb_disable_tx(port);
+ pm3386_disable_tx(port);
+ pm3386_disable_rx(port);
+ caleb_disable_rx(port);
+ }
+}
+
+static int __init enp2611_init_module(void)
+{
+ int i;
+
+ if (!machine_is_enp2611())
+ return -ENODEV;
+
+ caleb_reset();
+ pm3386_reset();
+
+ for (i = 0; i < 3; i++) {
+ nds[i] = ixpdev_alloc(i, sizeof(struct enp2611_ixpdev_priv));
+ if (nds[i] == NULL) {
+ while (--i >= 0)
+ free_netdev(nds[i]);
+ return -ENOMEM;
+ }
+
+ SET_MODULE_OWNER(nds[i]);
+ nds[i]->get_stats = enp2611_get_stats;
+ pm3386_init_port(i);
+ pm3386_get_mac(i, nds[i]->dev_addr);
+ }
+
+ ixp2400_msf_init(&enp2611_msf_parameters);
+
+ if (ixpdev_init(3, nds, enp2611_set_port_admin_status)) {
+ for (i = 0; i < 3; i++)
+ free_netdev(nds[i]);
+ return -EINVAL;
+ }
+
+ init_timer(&link_check_timer);
+ link_check_timer.function = enp2611_check_link_status;
+ link_check_timer.expires = jiffies;
+ add_timer(&link_check_timer);
+
+ return 0;
+}
+
+static void __exit enp2611_cleanup_module(void)
+{
+ int i;
+
+ del_timer_sync(&link_check_timer);
+
+ ixpdev_deinit();
+ for (i = 0; i < 3; i++)
+ free_netdev(nds[i]);
+}
+
+module_init(enp2611_init_module);
+module_exit(enp2611_cleanup_module);
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/ixp2000/ixp2400-msf.c b/drivers/net/ixp2000/ixp2400-msf.c
new file mode 100644
index 0000000..48a3a89
--- /dev/null
+++ b/drivers/net/ixp2000/ixp2400-msf.c
@@ -0,0 +1,213 @@
+/*
+ * Generic library functions for the MSF (Media and Switch Fabric) unit
+ * found on the Intel IXP2400 network processor.
+ *
+ * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
+ * Dedicated to Marija Kulikova.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as
+ * published by the Free Software Foundation; either version 2.1 of the
+ * License, or (at your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/hardware.h>
+#include <asm/arch/ixp2000-regs.h>
+#include <asm/delay.h>
+#include <asm/io.h>
+#include "ixp2400-msf.h"
+
+/*
+ * This is the Intel recommended PLL init procedure as described on
+ * page 340 of the IXP2400/IXP2800 Programmer's Reference Manual.
+ */
+static void ixp2400_pll_init(struct ixp2400_msf_parameters *mp)
+{
+ int rx_dual_clock;
+ int tx_dual_clock;
+ u32 value;
+
+ /*
+ * If the RX mode is not 1x32, we have to enable both RX PLLs
+ * (#0 and #1.) The same thing for the TX direction.
+ */
+ rx_dual_clock = !!(mp->rx_mode & IXP2400_RX_MODE_WIDTH_MASK);
+ tx_dual_clock = !!(mp->tx_mode & IXP2400_TX_MODE_WIDTH_MASK);
+
+ /*
+ * Read initial value.
+ */
+ value = ixp2000_reg_read(IXP2000_MSF_CLK_CNTRL);
+
+ /*
+ * Put PLLs in powerdown and bypass mode.
+ */
+ value |= 0x0000f0f0;
+ ixp2000_reg_write(IXP2000_MSF_CLK_CNTRL, value);
+
+ /*
+ * Set single or dual clock mode bits.
+ */
+ value &= ~0x03000000;
+ value |= (rx_dual_clock << 24) | (tx_dual_clock << 25);
+
+ /*
+ * Set multipliers.
+ */
+ value &= ~0x00ff0000;
+ value |= mp->rxclk01_multiplier << 16;
+ value |= mp->rxclk23_multiplier << 18;
+ value |= mp->txclk01_multiplier << 20;
+ value |= mp->txclk23_multiplier << 22;
+
+ /*
+ * And write value.
+ */
+ ixp2000_reg_write(IXP2000_MSF_CLK_CNTRL, value);
+
+ /*
+ * Disable PLL bypass mode.
+ */
+ value &= ~(0x00005000 | rx_dual_clock << 13 | tx_dual_clock << 15);
+ ixp2000_reg_write(IXP2000_MSF_CLK_CNTRL, value);
+
+ /*
+ * Turn on PLLs.
+ */
+ value &= ~(0x00000050 | rx_dual_clock << 5 | tx_dual_clock << 7);
+ ixp2000_reg_write(IXP2000_MSF_CLK_CNTRL, value);
+
+ /*
+ * Wait for PLLs to lock. There are lock status bits, but IXP2400
+ * erratum #65 says that these lock bits should not be relied upon
+ * as they might not accurately reflect the true state of the PLLs.
+ */
+ udelay(100);
+}
+
+/*
+ * Needed according to p480 of Programmer's Reference Manual.
+ */
+static void ixp2400_msf_free_rbuf_entries(struct ixp2400_msf_parameters *mp)
+{
+ int size_bits;
+ int i;
+
+ /*
+ * Work around IXP2400 erratum #69 (silent RBUF-to-DRAM transfer
+ * corruption) in the Intel-recommended way: do not add the RBUF
+ * elements susceptible to corruption to the freelist.
+ */
+ size_bits = mp->rx_mode & IXP2400_RX_MODE_RBUF_SIZE_MASK;
+ if (size_bits == IXP2400_RX_MODE_RBUF_SIZE_64) {
+ for (i = 1; i < 128; i++) {
+ if (i == 9 || i == 18 || i == 27)
+ continue;
+ ixp2000_reg_write(IXP2000_MSF_RBUF_ELEMENT_DONE, i);
+ }
+ } else if (size_bits == IXP2400_RX_MODE_RBUF_SIZE_128) {
+ for (i = 1; i < 64; i++) {
+ if (i == 4 || i == 9 || i == 13)
+ continue;
+ ixp2000_reg_write(IXP2000_MSF_RBUF_ELEMENT_DONE, i);
+ }
+ } else if (size_bits == IXP2400_RX_MODE_RBUF_SIZE_256) {
+ for (i = 1; i < 32; i++) {
+ if (i == 2 || i == 4 || i == 6)
+ continue;
+ ixp2000_reg_write(IXP2000_MSF_RBUF_ELEMENT_DONE, i);
+ }
+ }
+}
+
+static u32 ixp2400_msf_valid_channels(u32 reg)
+{
+ u32 channels;
+
+ channels = 0;
+ switch (reg & IXP2400_RX_MODE_WIDTH_MASK) {
+ case IXP2400_RX_MODE_1x32:
+ channels = 0x1;
+ if (reg & IXP2400_RX_MODE_MPHY &&
+ !(reg & IXP2400_RX_MODE_MPHY_32))
+ channels = 0xf;
+ break;
+
+ case IXP2400_RX_MODE_2x16:
+ channels = 0x5;
+ break;
+
+ case IXP2400_RX_MODE_4x8:
+ channels = 0xf;
+ break;
+
+ case IXP2400_RX_MODE_1x16_2x8:
+ channels = 0xd;
+ break;
+ }
+
+ return channels;
+}
+
+static void ixp2400_msf_enable_rx(struct ixp2400_msf_parameters *mp)
+{
+ u32 value;
+
+ value = ixp2000_reg_read(IXP2000_MSF_RX_CONTROL) & 0x0fffffff;
+ value |= ixp2400_msf_valid_channels(mp->rx_mode) << 28;
+ ixp2000_reg_write(IXP2000_MSF_RX_CONTROL, value);
+}
+
+static void ixp2400_msf_enable_tx(struct ixp2400_msf_parameters *mp)
+{
+ u32 value;
+
+ value = ixp2000_reg_read(IXP2000_MSF_TX_CONTROL) & 0x0fffffff;
+ value |= ixp2400_msf_valid_channels(mp->tx_mode) << 28;
+ ixp2000_reg_write(IXP2000_MSF_TX_CONTROL, value);
+}
+
+
+void ixp2400_msf_init(struct ixp2400_msf_parameters *mp)
+{
+ u32 value;
+ int i;
+
+ /*
+ * Init the RX/TX PLLs based on the passed parameter block.
+ */
+ ixp2400_pll_init(mp);
+
+ /*
+ * Reset MSF. Bit 7 in IXP_RESET_0 resets the MSF.
+ */
+ value = ixp2000_reg_read(IXP2000_RESET0);
+ ixp2000_reg_write(IXP2000_RESET0, value | 0x80);
+ ixp2000_reg_write(IXP2000_RESET0, value & ~0x80);
+
+ /*
+ * Initialise the RX section.
+ */
+ ixp2000_reg_write(IXP2000_MSF_RX_MPHY_POLL_LIMIT, mp->rx_poll_ports - 1);
+ ixp2000_reg_write(IXP2000_MSF_RX_CONTROL, mp->rx_mode);
+ for (i = 0; i < 4; i++) {
+ ixp2000_reg_write(IXP2000_MSF_RX_UP_CONTROL_0 + i,
+ mp->rx_channel_mode[i]);
+ }
+ ixp2400_msf_free_rbuf_entries(mp);
+ ixp2400_msf_enable_rx(mp);
+
+ /*
+ * Initialise the TX section.
+ */
+ ixp2000_reg_write(IXP2000_MSF_TX_MPHY_POLL_LIMIT, mp->tx_poll_ports - 1);
+ ixp2000_reg_write(IXP2000_MSF_TX_CONTROL, mp->tx_mode);
+ for (i = 0; i < 4; i++) {
+ ixp2000_reg_write(IXP2000_MSF_TX_UP_CONTROL_0 + i,
+ mp->tx_channel_mode[i]);
+ }
+ ixp2400_msf_enable_tx(mp);
+}
diff --git a/drivers/net/ixp2000/ixp2400-msf.h b/drivers/net/ixp2000/ixp2400-msf.h
new file mode 100644
index 0000000..3ac1af2
--- /dev/null
+++ b/drivers/net/ixp2000/ixp2400-msf.h
@@ -0,0 +1,115 @@
+/*
+ * Generic library functions for the MSF (Media and Switch Fabric) unit
+ * found on the Intel IXP2400 network processor.
+ *
+ * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
+ * Dedicated to Marija Kulikova.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as
+ * published by the Free Software Foundation; either version 2.1 of the
+ * License, or (at your option) any later version.
+ */
+
+#ifndef __IXP2400_MSF_H
+#define __IXP2400_MSF_H
+
+struct ixp2400_msf_parameters
+{
+ u32 rx_mode;
+ unsigned rxclk01_multiplier:2;
+ unsigned rxclk23_multiplier:2;
+ unsigned rx_poll_ports:6;
+ u32 rx_channel_mode[4];
+
+ u32 tx_mode;
+ unsigned txclk01_multiplier:2;
+ unsigned txclk23_multiplier:2;
+ unsigned tx_poll_ports:6;
+ u32 tx_channel_mode[4];
+};
+
+void ixp2400_msf_init(struct ixp2400_msf_parameters *mp);
+
+#define IXP2400_PLL_MULTIPLIER_48 0x00
+#define IXP2400_PLL_MULTIPLIER_24 0x01
+#define IXP2400_PLL_MULTIPLIER_16 0x02
+#define IXP2400_PLL_MULTIPLIER_12 0x03
+
+#define IXP2400_RX_MODE_CSIX 0x00400000
+#define IXP2400_RX_MODE_UTOPIA_POS 0x00000000
+#define IXP2400_RX_MODE_WIDTH_MASK 0x00300000
+#define IXP2400_RX_MODE_1x16_2x8 0x00300000
+#define IXP2400_RX_MODE_4x8 0x00200000
+#define IXP2400_RX_MODE_2x16 0x00100000
+#define IXP2400_RX_MODE_1x32 0x00000000
+#define IXP2400_RX_MODE_MPHY 0x00080000
+#define IXP2400_RX_MODE_SPHY 0x00000000
+#define IXP2400_RX_MODE_MPHY_32 0x00040000
+#define IXP2400_RX_MODE_MPHY_4 0x00000000
+#define IXP2400_RX_MODE_MPHY_POLLED_STATUS 0x00020000
+#define IXP2400_RX_MODE_MPHY_DIRECT_STATUS 0x00000000
+#define IXP2400_RX_MODE_CBUS_FULL_DUPLEX 0x00010000
+#define IXP2400_RX_MODE_CBUS_SIMPLEX 0x00000000
+#define IXP2400_RX_MODE_MPHY_LEVEL2 0x00004000
+#define IXP2400_RX_MODE_MPHY_LEVEL3 0x00000000
+#define IXP2400_RX_MODE_CBUS_8BIT 0x00002000
+#define IXP2400_RX_MODE_CBUS_4BIT 0x00000000
+#define IXP2400_RX_MODE_CSIX_SINGLE_FREELIST 0x00000200
+#define IXP2400_RX_MODE_CSIX_SPLIT_FREELISTS 0x00000000
+#define IXP2400_RX_MODE_RBUF_SIZE_MASK 0x0000000c
+#define IXP2400_RX_MODE_RBUF_SIZE_256 0x00000008
+#define IXP2400_RX_MODE_RBUF_SIZE_128 0x00000004
+#define IXP2400_RX_MODE_RBUF_SIZE_64 0x00000000
+
+#define IXP2400_PORT_RX_MODE_SLAVE 0x00000040
+#define IXP2400_PORT_RX_MODE_MASTER 0x00000000
+#define IXP2400_PORT_RX_MODE_POS_PHY_L3 0x00000020
+#define IXP2400_PORT_RX_MODE_POS_PHY_L2 0x00000000
+#define IXP2400_PORT_RX_MODE_POS_PHY 0x00000010
+#define IXP2400_PORT_RX_MODE_UTOPIA 0x00000000
+#define IXP2400_PORT_RX_MODE_EVEN_PARITY 0x0000000c
+#define IXP2400_PORT_RX_MODE_ODD_PARITY 0x00000008
+#define IXP2400_PORT_RX_MODE_NO_PARITY 0x00000000
+#define IXP2400_PORT_RX_MODE_UTOPIA_BIG_CELLS 0x00000002
+#define IXP2400_PORT_RX_MODE_UTOPIA_NORMAL_CELLS 0x00000000
+#define IXP2400_PORT_RX_MODE_2_CYCLE_DECODE 0x00000001
+#define IXP2400_PORT_RX_MODE_1_CYCLE_DECODE 0x00000000
+
+#define IXP2400_TX_MODE_CSIX 0x00400000
+#define IXP2400_TX_MODE_UTOPIA_POS 0x00000000
+#define IXP2400_TX_MODE_WIDTH_MASK 0x00300000
+#define IXP2400_TX_MODE_1x16_2x8 0x00300000
+#define IXP2400_TX_MODE_4x8 0x00200000
+#define IXP2400_TX_MODE_2x16 0x00100000
+#define IXP2400_TX_MODE_1x32 0x00000000
+#define IXP2400_TX_MODE_MPHY 0x00080000
+#define IXP2400_TX_MODE_SPHY 0x00000000
+#define IXP2400_TX_MODE_MPHY_32 0x00040000
+#define IXP2400_TX_MODE_MPHY_4 0x00000000
+#define IXP2400_TX_MODE_MPHY_POLLED_STATUS 0x00020000
+#define IXP2400_TX_MODE_MPHY_DIRECT_STATUS 0x00000000
+#define IXP2400_TX_MODE_CBUS_FULL_DUPLEX 0x00010000
+#define IXP2400_TX_MODE_CBUS_SIMPLEX 0x00000000
+#define IXP2400_TX_MODE_MPHY_LEVEL2 0x00004000
+#define IXP2400_TX_MODE_MPHY_LEVEL3 0x00000000
+#define IXP2400_TX_MODE_CBUS_8BIT 0x00002000
+#define IXP2400_TX_MODE_CBUS_4BIT 0x00000000
+#define IXP2400_TX_MODE_TBUF_SIZE_MASK 0x0000000c
+#define IXP2400_TX_MODE_TBUF_SIZE_256 0x00000008
+#define IXP2400_TX_MODE_TBUF_SIZE_128 0x00000004
+#define IXP2400_TX_MODE_TBUF_SIZE_64 0x00000000
+
+#define IXP2400_PORT_TX_MODE_SLAVE 0x00000040
+#define IXP2400_PORT_TX_MODE_MASTER 0x00000000
+#define IXP2400_PORT_TX_MODE_POS_PHY 0x00000010
+#define IXP2400_PORT_TX_MODE_UTOPIA 0x00000000
+#define IXP2400_PORT_TX_MODE_EVEN_PARITY 0x0000000c
+#define IXP2400_PORT_TX_MODE_ODD_PARITY 0x00000008
+#define IXP2400_PORT_TX_MODE_NO_PARITY 0x00000000
+#define IXP2400_PORT_TX_MODE_UTOPIA_BIG_CELLS 0x00000002
+#define IXP2400_PORT_TX_MODE_2_CYCLE_DECODE 0x00000001
+#define IXP2400_PORT_TX_MODE_1_CYCLE_DECODE 0x00000000
+
+
+#endif
diff --git a/drivers/net/ixp2000/ixp2400_rx.uc b/drivers/net/ixp2000/ixp2400_rx.uc
new file mode 100644
index 0000000..42a73e35
--- /dev/null
+++ b/drivers/net/ixp2000/ixp2400_rx.uc
@@ -0,0 +1,408 @@
+/*
+ * RX ucode for the Intel IXP2400 in POS-PHY mode.
+ * Copyright (C) 2004, 2005 Lennert Buytenhek
+ * Dedicated to Marija Kulikova.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Assumptions made in this code:
+ * - The IXP2400 MSF is configured for POS-PHY mode, in a mode where
+ * only one full element list is used. This includes, for example,
+ * 1x32 SPHY and 1x32 MPHY32, but not 4x8 SPHY or 1x32 MPHY4. (This
+ * is not an exhaustive list.)
+ * - The RBUF uses 64-byte mpackets.
+ * - RX descriptors reside in SRAM, and have the following format:
+ * struct rx_desc
+ * {
+ * // to uengine
+ * u32 buf_phys_addr;
+ * u32 buf_length;
+ *
+ * // from uengine
+ * u32 channel;
+ * u32 pkt_length;
+ * };
+ * - Packet data resides in DRAM.
+ * - Packet buffer addresses are 8-byte aligned.
+ * - Scratch ring 0 is rx_pending.
+ * - Scratch ring 1 is rx_done, and has status condition 'full'.
+ * - The host triggers rx_done flush and rx_pending refill on seeing INTA.
+ * - This code is run on all eight threads of the microengine it runs on.
+ *
+ * Local memory is used for per-channel RX state.
+ */
+
+#define RX_THREAD_FREELIST_0 0x0030
+#define RBUF_ELEMENT_DONE 0x0044
+
+#define CHANNEL_FLAGS *l$index0[0]
+#define CHANNEL_FLAG_RECEIVING 1
+#define PACKET_LENGTH *l$index0[1]
+#define PACKET_CHECKSUM *l$index0[2]
+#define BUFFER_HANDLE *l$index0[3]
+#define BUFFER_START *l$index0[4]
+#define BUFFER_LENGTH *l$index0[5]
+
+#define CHANNEL_STATE_SIZE 24 // in bytes
+#define CHANNEL_STATE_SHIFT 5 // ceil(log2(state size))
+
+
+ .sig volatile sig1
+ .sig volatile sig2
+ .sig volatile sig3
+
+ .sig mpacket_arrived
+ .reg add_to_rx_freelist
+ .reg read $rsw0, $rsw1
+ .xfer_order $rsw0 $rsw1
+
+ .reg zero
+
+ /*
+ * Initialise add_to_rx_freelist.
+ */
+ .begin
+ .reg temp
+ .reg temp2
+
+ immed[add_to_rx_freelist, RX_THREAD_FREELIST_0]
+ immed_w1[add_to_rx_freelist, (&$rsw0 | (&mpacket_arrived << 12))]
+
+ local_csr_rd[ACTIVE_CTX_STS]
+ immed[temp, 0]
+ alu[temp2, temp, and, 0x1f]
+ alu_shf[add_to_rx_freelist, add_to_rx_freelist, or, temp2, <<20]
+ alu[temp2, temp, and, 0x80]
+ alu_shf[add_to_rx_freelist, add_to_rx_freelist, or, temp2, <<18]
+ .end
+
+ immed[zero, 0]
+
+ /*
+ * Skip context 0 initialisation?
+ */
+ .begin
+ br!=ctx[0, mpacket_receive_loop#]
+ .end
+
+ /*
+ * Initialise local memory.
+ */
+ .begin
+ .reg addr
+ .reg temp
+
+ immed[temp, 0]
+ init_local_mem_loop#:
+ alu_shf[addr, --, b, temp, <<CHANNEL_STATE_SHIFT]
+ local_csr_wr[ACTIVE_LM_ADDR_0, addr]
+ nop
+ nop
+ nop
+
+ immed[CHANNEL_FLAGS, 0]
+
+ alu[temp, temp, +, 1]
+ alu[--, temp, and, 0x20]
+ beq[init_local_mem_loop#]
+ .end
+
+ /*
+ * Initialise signal pipeline.
+ */
+ .begin
+ local_csr_wr[SAME_ME_SIGNAL, (&sig1 << 3)]
+ .set_sig sig1
+
+ local_csr_wr[SAME_ME_SIGNAL, (&sig2 << 3)]
+ .set_sig sig2
+
+ local_csr_wr[SAME_ME_SIGNAL, (&sig3 << 3)]
+ .set_sig sig3
+ .end
+
+mpacket_receive_loop#:
+ /*
+ * Synchronise and wait for mpacket.
+ */
+ .begin
+ ctx_arb[sig1]
+ local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig1 << 3))]
+
+ msf[fast_wr, --, add_to_rx_freelist, 0]
+ .set_sig mpacket_arrived
+ ctx_arb[mpacket_arrived]
+ .set $rsw0 $rsw1
+ .end
+
+ /*
+ * We halt if we see {inbparerr,parerr,null,soperror}.
+ */
+ .begin
+ alu_shf[--, 0x1b, and, $rsw0, >>8]
+ bne[abort_rswerr#]
+ .end
+
+ /*
+ * Point local memory pointer to this channel's state area.
+ */
+ .begin
+ .reg chanaddr
+
+ alu[chanaddr, $rsw0, and, 0x1f]
+ alu_shf[chanaddr, --, b, chanaddr, <<CHANNEL_STATE_SHIFT]
+ local_csr_wr[ACTIVE_LM_ADDR_0, chanaddr]
+ nop
+ nop
+ nop
+ .end
+
+ /*
+ * Check whether we received a SOP mpacket while we were already
+ * working on a packet, or a non-SOP mpacket while there was no
+ * packet pending. (SOP == RECEIVING -> abort) If everything's
+ * okay, update the RECEIVING flag to reflect our new state.
+ */
+ .begin
+ .reg temp
+ .reg eop
+
+ #if CHANNEL_FLAG_RECEIVING != 1
+ #error CHANNEL_FLAG_RECEIVING is not 1
+ #endif
+
+ alu_shf[temp, 1, and, $rsw0, >>15]
+ alu[temp, temp, xor, CHANNEL_FLAGS]
+ alu[--, temp, and, CHANNEL_FLAG_RECEIVING]
+ beq[abort_proterr#]
+
+ alu_shf[eop, 1, and, $rsw0, >>14]
+ alu[CHANNEL_FLAGS, temp, xor, eop]
+ .end
+
+ /*
+ * Copy the mpacket into the right spot, and in case of EOP,
+ * write back the descriptor and pass the packet on.
+ */
+ .begin
+ .reg buffer_offset
+ .reg _packet_length
+ .reg _packet_checksum
+ .reg _buffer_handle
+ .reg _buffer_start
+ .reg _buffer_length
+
+ /*
+ * Determine buffer_offset, _packet_length and
+ * _packet_checksum.
+ */
+ .begin
+ .reg temp
+
+ alu[--, 1, and, $rsw0, >>15]
+ beq[not_sop#]
+
+ immed[PACKET_LENGTH, 0]
+ immed[PACKET_CHECKSUM, 0]
+
+ not_sop#:
+ alu[buffer_offset, --, b, PACKET_LENGTH]
+ alu_shf[temp, 0xff, and, $rsw0, >>16]
+ alu[_packet_length, buffer_offset, +, temp]
+ alu[PACKET_LENGTH, --, b, _packet_length]
+
+ immed[temp, 0xffff]
+ alu[temp, $rsw1, and, temp]
+ alu[_packet_checksum, PACKET_CHECKSUM, +, temp]
+ alu[PACKET_CHECKSUM, --, b, _packet_checksum]
+ .end
+
+ /*
+ * Allocate buffer in case of SOP.
+ */
+ .begin
+ .reg temp
+
+ alu[temp, 1, and, $rsw0, >>15]
+ beq[skip_buffer_alloc#]
+
+ .begin
+ .sig zzz
+ .reg read $stemp $stemp2
+ .xfer_order $stemp $stemp2
+
+ rx_nobufs#:
+ scratch[get, $stemp, zero, 0, 1], ctx_swap[zzz]
+ alu[_buffer_handle, --, b, $stemp]
+ beq[rx_nobufs#]
+
+ sram[read, $stemp, _buffer_handle, 0, 2],
+ ctx_swap[zzz]
+ alu[_buffer_start, --, b, $stemp]
+ alu[_buffer_length, --, b, $stemp2]
+ .end
+
+ skip_buffer_alloc#:
+ .end
+
+ /*
+ * Resynchronise.
+ */
+ .begin
+ ctx_arb[sig2]
+ local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig2 << 3))]
+ .end
+
+ /*
+ * Synchronise buffer state.
+ */
+ .begin
+ .reg temp
+
+ alu[temp, 1, and, $rsw0, >>15]
+ beq[copy_from_local_mem#]
+
+ alu[BUFFER_HANDLE, --, b, _buffer_handle]
+ alu[BUFFER_START, --, b, _buffer_start]
+ alu[BUFFER_LENGTH, --, b, _buffer_length]
+ br[sync_state_done#]
+
+ copy_from_local_mem#:
+ alu[_buffer_handle, --, b, BUFFER_HANDLE]
+ alu[_buffer_start, --, b, BUFFER_START]
+ alu[_buffer_length, --, b, BUFFER_LENGTH]
+
+ sync_state_done#:
+ .end
+
+#if 0
+ /*
+ * Debug buffer state management.
+ */
+ .begin
+ .reg temp
+
+ alu[temp, 1, and, $rsw0, >>14]
+ beq[no_poison#]
+ immed[BUFFER_HANDLE, 0xdead]
+ immed[BUFFER_START, 0xdead]
+ immed[BUFFER_LENGTH, 0xdead]
+ no_poison#:
+
+ immed[temp, 0xdead]
+ alu[--, _buffer_handle, -, temp]
+ beq[state_corrupted#]
+ alu[--, _buffer_start, -, temp]
+ beq[state_corrupted#]
+ alu[--, _buffer_length, -, temp]
+ beq[state_corrupted#]
+ .end
+#endif
+
+ /*
+ * Check buffer length.
+ */
+ .begin
+ alu[--, _buffer_length, -, _packet_length]
+ blo[buffer_overflow#]
+ .end
+
+ /*
+ * Copy the mpacket and give back the RBUF element.
+ */
+ .begin
+ .reg element
+ .reg xfer_size
+ .reg temp
+ .sig copy_sig
+
+ alu_shf[element, 0x7f, and, $rsw0, >>24]
+ alu_shf[xfer_size, 0xff, and, $rsw0, >>16]
+
+ alu[xfer_size, xfer_size, -, 1]
+ alu_shf[xfer_size, 0x10, or, xfer_size, >>3]
+ alu_shf[temp, 0x10, or, xfer_size, <<21]
+ alu_shf[temp, temp, or, element, <<11]
+ alu_shf[--, temp, or, 1, <<18]
+
+ dram[rbuf_rd, --, _buffer_start, buffer_offset, max_8],
+ indirect_ref, sig_done[copy_sig]
+ ctx_arb[copy_sig]
+
+ alu[temp, RBUF_ELEMENT_DONE, or, element, <<16]
+ msf[fast_wr, --, temp, 0]
+ .end
+
+ /*
+ * If EOP, write back the packet descriptor.
+ */
+ .begin
+ .reg write $stemp $stemp2
+ .xfer_order $stemp $stemp2
+ .sig zzz
+
+ alu_shf[--, 1, and, $rsw0, >>14]
+ beq[no_writeback#]
+
+ alu[$stemp, $rsw0, and, 0x1f]
+ alu[$stemp2, --, b, _packet_length]
+ sram[write, $stemp, _buffer_handle, 8, 2], ctx_swap[zzz]
+
+ no_writeback#:
+ .end
+
+ /*
+ * Resynchronise.
+ */
+ .begin
+ ctx_arb[sig3]
+ local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig3 << 3))]
+ .end
+
+ /*
+ * If EOP, put the buffer back onto the scratch ring.
+ */
+ .begin
+ .reg write $stemp
+ .sig zzz
+
+ br_inp_state[SCR_Ring1_Status, rx_done_ring_overflow#]
+
+ alu_shf[--, 1, and, $rsw0, >>14]
+ beq[mpacket_receive_loop#]
+
+ alu[--, 1, and, $rsw0, >>10]
+ bne[rxerr#]
+
+ alu[$stemp, --, b, _buffer_handle]
+ scratch[put, $stemp, zero, 4, 1], ctx_swap[zzz]
+ cap[fast_wr, 0, XSCALE_INT_A]
+ br[mpacket_receive_loop#]
+
+ rxerr#:
+ alu[$stemp, --, b, _buffer_handle]
+ scratch[put, $stemp, zero, 0, 1], ctx_swap[zzz]
+ br[mpacket_receive_loop#]
+ .end
+ .end
+
+
+abort_rswerr#:
+ halt
+
+abort_proterr#:
+ halt
+
+state_corrupted#:
+ halt
+
+buffer_overflow#:
+ halt
+
+rx_done_ring_overflow#:
+ halt
+
+
diff --git a/drivers/net/ixp2000/ixp2400_rx.ucode b/drivers/net/ixp2000/ixp2400_rx.ucode
new file mode 100644
index 0000000..e8aee2f
--- /dev/null
+++ b/drivers/net/ixp2000/ixp2400_rx.ucode
@@ -0,0 +1,130 @@
+static struct ixp2000_uengine_code ixp2400_rx =
+{
+ .cpu_model_bitmask = 0x000003fe,
+ .cpu_min_revision = 0,
+ .cpu_max_revision = 255,
+
+ .uengine_parameters = IXP2000_UENGINE_8_CONTEXTS |
+ IXP2000_UENGINE_PRN_UPDATE_EVERY |
+ IXP2000_UENGINE_NN_FROM_PREVIOUS |
+ IXP2000_UENGINE_ASSERT_EMPTY_AT_0 |
+ IXP2000_UENGINE_LM_ADDR1_PER_CONTEXT |
+ IXP2000_UENGINE_LM_ADDR0_PER_CONTEXT,
+
+ .initial_reg_values = (struct ixp2000_reg_value []) {
+ { -1, -1 }
+ },
+
+ .num_insns = 109,
+ .insns = (u8 []) {
+ 0xf0, 0x00, 0x0c, 0xc0, 0x05,
+ 0xf4, 0x44, 0x0c, 0x00, 0x05,
+ 0xfc, 0x04, 0x4c, 0x00, 0x00,
+ 0xf0, 0x00, 0x00, 0x3b, 0x00,
+ 0xb4, 0x40, 0xf0, 0x3b, 0x1f,
+ 0x8a, 0xc0, 0x50, 0x3e, 0x05,
+ 0xb4, 0x40, 0xf0, 0x3b, 0x80,
+ 0x9a, 0xe0, 0x00, 0x3e, 0x05,
+ 0xf0, 0x00, 0x00, 0x07, 0x00,
+ 0xd8, 0x05, 0xc0, 0x00, 0x11,
+ 0xf0, 0x00, 0x00, 0x0f, 0x00,
+ 0x91, 0xb0, 0x20, 0x0e, 0x00,
+ 0xfc, 0x06, 0x60, 0x0b, 0x00,
+ 0xf0, 0x00, 0x0c, 0x03, 0x00,
+ 0xf0, 0x00, 0x0c, 0x03, 0x00,
+ 0xf0, 0x00, 0x0c, 0x03, 0x00,
+ 0xf0, 0x00, 0x0c, 0x02, 0x00,
+ 0xb0, 0xc0, 0x30, 0x0f, 0x01,
+ 0xa4, 0x70, 0x00, 0x0f, 0x20,
+ 0xd8, 0x02, 0xc0, 0x01, 0x00,
+ 0xfc, 0x10, 0xac, 0x23, 0x08,
+ 0xfc, 0x10, 0xac, 0x43, 0x10,
+ 0xfc, 0x10, 0xac, 0x63, 0x18,
+ 0xe0, 0x00, 0x00, 0x00, 0x02,
+ 0xfc, 0x10, 0xae, 0x23, 0x88,
+ 0x3d, 0x00, 0x04, 0x03, 0x20,
+ 0xe0, 0x00, 0x00, 0x00, 0x10,
+ 0x84, 0x82, 0x02, 0x01, 0x3b,
+ 0xd8, 0x1a, 0x00, 0x01, 0x01,
+ 0xb4, 0x00, 0x8c, 0x7d, 0x80,
+ 0x91, 0xb0, 0x80, 0x22, 0x00,
+ 0xfc, 0x06, 0x60, 0x23, 0x00,
+ 0xf0, 0x00, 0x0c, 0x03, 0x00,
+ 0xf0, 0x00, 0x0c, 0x03, 0x00,
+ 0xf0, 0x00, 0x0c, 0x03, 0x00,
+ 0x94, 0xf0, 0x92, 0x01, 0x21,
+ 0xac, 0x40, 0x60, 0x26, 0x00,
+ 0xa4, 0x30, 0x0c, 0x04, 0x06,
+ 0xd8, 0x1a, 0x40, 0x01, 0x00,
+ 0x94, 0xe0, 0xa2, 0x01, 0x21,
+ 0xac, 0x20, 0x00, 0x28, 0x06,
+ 0x84, 0xf2, 0x02, 0x01, 0x21,
+ 0xd8, 0x0b, 0x40, 0x01, 0x00,
+ 0xf0, 0x00, 0x0c, 0x02, 0x01,
+ 0xf0, 0x00, 0x0c, 0x02, 0x02,
+ 0xa0, 0x00, 0x08, 0x04, 0x00,
+ 0x95, 0x00, 0xc6, 0x01, 0xff,
+ 0xa0, 0x80, 0x10, 0x30, 0x00,
+ 0xa0, 0x60, 0x1c, 0x00, 0x01,
+ 0xf0, 0x0f, 0xf0, 0x33, 0xff,
+ 0xb4, 0x00, 0xc0, 0x31, 0x81,
+ 0xb0, 0x80, 0xb0, 0x32, 0x02,
+ 0xa0, 0x20, 0x20, 0x2c, 0x00,
+ 0x94, 0xf0, 0xd2, 0x01, 0x21,
+ 0xd8, 0x0f, 0x40, 0x01, 0x00,
+ 0x19, 0x40, 0x10, 0x04, 0x20,
+ 0xa0, 0x00, 0x26, 0x04, 0x00,
+ 0xd8, 0x0d, 0xc0, 0x01, 0x00,
+ 0x00, 0x42, 0x10, 0x80, 0x02,
+ 0xb0, 0x00, 0x46, 0x04, 0x00,
+ 0xb0, 0x00, 0x56, 0x08, 0x00,
+ 0xe0, 0x00, 0x00, 0x00, 0x04,
+ 0xfc, 0x10, 0xae, 0x43, 0x90,
+ 0x84, 0xf0, 0x32, 0x01, 0x21,
+ 0xd8, 0x11, 0x40, 0x01, 0x00,
+ 0xa0, 0x60, 0x3c, 0x00, 0x02,
+ 0xa0, 0x20, 0x40, 0x10, 0x00,
+ 0xa0, 0x20, 0x50, 0x14, 0x00,
+ 0xd8, 0x12, 0x00, 0x00, 0x18,
+ 0xa0, 0x00, 0x28, 0x0c, 0x00,
+ 0xb0, 0x00, 0x48, 0x10, 0x00,
+ 0xb0, 0x00, 0x58, 0x14, 0x00,
+ 0xaa, 0xf0, 0x00, 0x14, 0x01,
+ 0xd8, 0x1a, 0xc0, 0x01, 0x05,
+ 0x85, 0x80, 0x42, 0x01, 0xff,
+ 0x95, 0x00, 0x66, 0x01, 0xff,
+ 0xba, 0xc0, 0x60, 0x1b, 0x01,
+ 0x9a, 0x30, 0x60, 0x19, 0x30,
+ 0x9a, 0xb0, 0x70, 0x1a, 0x30,
+ 0x9b, 0x50, 0x78, 0x1e, 0x04,
+ 0x8a, 0xe2, 0x08, 0x1e, 0x21,
+ 0x6a, 0x4e, 0x00, 0x13, 0x00,
+ 0xe0, 0x00, 0x00, 0x00, 0x30,
+ 0x9b, 0x00, 0x7a, 0x92, 0x04,
+ 0x3d, 0x00, 0x04, 0x1f, 0x20,
+ 0x84, 0xe2, 0x02, 0x01, 0x21,
+ 0xd8, 0x16, 0x80, 0x01, 0x00,
+ 0xa4, 0x18, 0x0c, 0x7d, 0x80,
+ 0xa0, 0x58, 0x1c, 0x00, 0x01,
+ 0x01, 0x42, 0x00, 0xa0, 0x02,
+ 0xe0, 0x00, 0x00, 0x00, 0x08,
+ 0xfc, 0x10, 0xae, 0x63, 0x98,
+ 0xd8, 0x1b, 0x00, 0xc2, 0x14,
+ 0x84, 0xe2, 0x02, 0x01, 0x21,
+ 0xd8, 0x05, 0xc0, 0x01, 0x00,
+ 0x84, 0xa2, 0x02, 0x01, 0x21,
+ 0xd8, 0x19, 0x40, 0x01, 0x01,
+ 0xa0, 0x58, 0x0c, 0x00, 0x02,
+ 0x1a, 0x40, 0x00, 0x04, 0x24,
+ 0x33, 0x00, 0x01, 0x2f, 0x20,
+ 0xd8, 0x05, 0xc0, 0x00, 0x18,
+ 0xa0, 0x58, 0x0c, 0x00, 0x02,
+ 0x1a, 0x40, 0x00, 0x04, 0x20,
+ 0xd8, 0x05, 0xc0, 0x00, 0x18,
+ 0xe0, 0x00, 0x02, 0x00, 0x00,
+ 0xe0, 0x00, 0x02, 0x00, 0x00,
+ 0xe0, 0x00, 0x02, 0x00, 0x00,
+ 0xe0, 0x00, 0x02, 0x00, 0x00,
+ 0xe0, 0x00, 0x02, 0x00, 0x00,
+ }
+};
diff --git a/drivers/net/ixp2000/ixp2400_tx.uc b/drivers/net/ixp2000/ixp2400_tx.uc
new file mode 100644
index 0000000..d090d18
--- /dev/null
+++ b/drivers/net/ixp2000/ixp2400_tx.uc
@@ -0,0 +1,272 @@
+/*
+ * TX ucode for the Intel IXP2400 in POS-PHY mode.
+ * Copyright (C) 2004, 2005 Lennert Buytenhek
+ * Dedicated to Marija Kulikova.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Assumptions made in this code:
+ * - The IXP2400 MSF is configured for POS-PHY mode, in a mode where
+ * only one TBUF partition is used. This includes, for example,
+ * 1x32 SPHY and 1x32 MPHY32, but not 4x8 SPHY or 1x32 MPHY4. (This
+ * is not an exhaustive list.)
+ * - The TBUF uses 64-byte mpackets.
+ * - TX descriptors reside in SRAM, and have the following format:
+ * struct tx_desc
+ * {
+ * // to uengine
+ * u32 buf_phys_addr;
+ * u32 pkt_length;
+ * u32 channel;
+ * };
+ * - Packet data resides in DRAM.
+ * - Packet buffer addresses are 8-byte aligned.
+ * - Scratch ring 2 is tx_pending.
+ * - Scratch ring 3 is tx_done, and has status condition 'full'.
+ * - This code is run on all eight threads of the microengine it runs on.
+ */
+
+#define TX_SEQUENCE_0 0x0060
+#define TBUF_CTRL 0x1800
+
+#define PARTITION_SIZE 128
+#define PARTITION_THRESH 96
+
+
+ .sig volatile sig1
+ .sig volatile sig2
+ .sig volatile sig3
+
+ .reg @old_tx_seq_0
+ .reg @mpkts_in_flight
+ .reg @next_tbuf_mpacket
+
+ .reg @buffer_handle
+ .reg @buffer_start
+ .reg @packet_length
+ .reg @channel
+ .reg @packet_offset
+
+ .reg zero
+
+ immed[zero, 0]
+
+ /*
+ * Skip context 0 initialisation?
+ */
+ .begin
+ br!=ctx[0, mpacket_tx_loop#]
+ .end
+
+ /*
+ * Wait until all pending TBUF elements have been transmitted.
+ */
+ .begin
+ .reg read $tx
+ .sig zzz
+
+ loop_empty#:
+ msf[read, $tx, zero, TX_SEQUENCE_0, 1], ctx_swap[zzz]
+ alu_shf[--, --, b, $tx, >>31]
+ beq[loop_empty#]
+
+ alu[@old_tx_seq_0, --, b, $tx]
+ .end
+
+ immed[@mpkts_in_flight, 0]
+ alu[@next_tbuf_mpacket, @old_tx_seq_0, and, (PARTITION_SIZE - 1)]
+
+ immed[@buffer_handle, 0]
+
+ /*
+ * Initialise signal pipeline.
+ */
+ .begin
+ local_csr_wr[SAME_ME_SIGNAL, (&sig1 << 3)]
+ .set_sig sig1
+
+ local_csr_wr[SAME_ME_SIGNAL, (&sig2 << 3)]
+ .set_sig sig2
+
+ local_csr_wr[SAME_ME_SIGNAL, (&sig3 << 3)]
+ .set_sig sig3
+ .end
+
+mpacket_tx_loop#:
+ .begin
+ .reg tbuf_element_index
+ .reg buffer_handle
+ .reg sop_eop
+ .reg packet_data
+ .reg channel
+ .reg mpacket_size
+
+ /*
+ * If there is no packet currently being transmitted,
+ * dequeue the next TX descriptor, and fetch the buffer
+ * address, packet length and destination channel number.
+ */
+ .begin
+ .reg read $stemp $stemp2 $stemp3
+ .xfer_order $stemp $stemp2 $stemp3
+ .sig zzz
+
+ ctx_arb[sig1]
+
+ alu[--, --, b, @buffer_handle]
+ bne[already_got_packet#]
+
+ tx_nobufs#:
+ scratch[get, $stemp, zero, 8, 1], ctx_swap[zzz]
+ alu[@buffer_handle, --, b, $stemp]
+ beq[tx_nobufs#]
+
+ sram[read, $stemp, $stemp, 0, 3], ctx_swap[zzz]
+ alu[@buffer_start, --, b, $stemp]
+ alu[@packet_length, --, b, $stemp2]
+ beq[zero_byte_packet#]
+ alu[@channel, --, b, $stemp3]
+ immed[@packet_offset, 0]
+
+ already_got_packet#:
+ local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig1 << 3))]
+ .end
+
+ /*
+ * Determine tbuf element index, SOP/EOP flags, mpacket
+ * offset and mpacket size and cache buffer_handle and
+ * channel number.
+ */
+ .begin
+ alu[tbuf_element_index, --, b, @next_tbuf_mpacket]
+ alu[@next_tbuf_mpacket, @next_tbuf_mpacket, +, 1]
+ alu[@next_tbuf_mpacket, @next_tbuf_mpacket, and,
+ (PARTITION_SIZE - 1)]
+
+ alu[buffer_handle, --, b, @buffer_handle]
+ immed[@buffer_handle, 0]
+
+ immed[sop_eop, 1]
+
+ alu[packet_data, --, b, @packet_offset]
+ bne[no_sop#]
+ alu[sop_eop, sop_eop, or, 2]
+ no_sop#:
+ alu[packet_data, packet_data, +, @buffer_start]
+
+ alu[channel, --, b, @channel]
+
+ alu[mpacket_size, @packet_length, -, @packet_offset]
+ alu[--, 64, -, mpacket_size]
+ bhs[eop#]
+ alu[@buffer_handle, --, b, buffer_handle]
+ immed[mpacket_size, 64]
+ alu[sop_eop, sop_eop, and, 2]
+ eop#:
+
+ alu[@packet_offset, @packet_offset, +, mpacket_size]
+ .end
+
+ /*
+ * Wait until there's enough space in the TBUF.
+ */
+ .begin
+ .reg read $tx
+ .reg temp
+ .sig zzz
+
+ ctx_arb[sig2]
+
+ br[test_space#]
+
+ loop_space#:
+ msf[read, $tx, zero, TX_SEQUENCE_0, 1], ctx_swap[zzz]
+
+ alu[temp, $tx, -, @old_tx_seq_0]
+ alu[temp, temp, and, 0xff]
+ alu[@mpkts_in_flight, @mpkts_in_flight, -, temp]
+
+ alu[@old_tx_seq_0, --, b, $tx]
+
+ test_space#:
+ alu[--, PARTITION_THRESH, -, @mpkts_in_flight]
+ blo[loop_space#]
+
+ alu[@mpkts_in_flight, @mpkts_in_flight, +, 1]
+
+ local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig2 << 3))]
+ .end
+
+ /*
+ * Copy the packet data to the TBUF.
+ */
+ .begin
+ .reg temp
+ .sig copy_sig
+
+ alu[temp, mpacket_size, -, 1]
+ alu_shf[temp, 0x10, or, temp, >>3]
+ alu_shf[temp, 0x10, or, temp, <<21]
+ alu_shf[temp, temp, or, tbuf_element_index, <<11]
+ alu_shf[--, temp, or, 1, <<18]
+
+ dram[tbuf_wr, --, packet_data, 0, max_8],
+ indirect_ref, sig_done[copy_sig]
+ ctx_arb[copy_sig]
+ .end
+
+ /*
+ * Mark TBUF element as ready-to-be-transmitted.
+ */
+ .begin
+ .reg write $tsw $tsw2
+ .xfer_order $tsw $tsw2
+ .reg temp
+ .sig zzz
+
+ alu_shf[temp, channel, or, mpacket_size, <<24]
+ alu_shf[$tsw, temp, or, sop_eop, <<8]
+ immed[$tsw2, 0]
+
+ immed[temp, TBUF_CTRL]
+ alu_shf[temp, temp, or, tbuf_element_index, <<3]
+ msf[write, $tsw, temp, 0, 2], ctx_swap[zzz]
+ .end
+
+ /*
+ * Resynchronise.
+ */
+ .begin
+ ctx_arb[sig3]
+ local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig3 << 3))]
+ .end
+
+ /*
+ * If this was an EOP mpacket, recycle the TX buffer
+ * and signal the host.
+ */
+ .begin
+ .reg write $stemp
+ .sig zzz
+
+ alu[--, sop_eop, and, 1]
+ beq[mpacket_tx_loop#]
+
+ tx_done_ring_full#:
+ br_inp_state[SCR_Ring3_Status, tx_done_ring_full#]
+
+ alu[$stemp, --, b, buffer_handle]
+ scratch[put, $stemp, zero, 12, 1], ctx_swap[zzz]
+ cap[fast_wr, 0, XSCALE_INT_A]
+ br[mpacket_tx_loop#]
+ .end
+ .end
+
+
+zero_byte_packet#:
+ halt
+
+
diff --git a/drivers/net/ixp2000/ixp2400_tx.ucode b/drivers/net/ixp2000/ixp2400_tx.ucode
new file mode 100644
index 0000000..a433e24
--- /dev/null
+++ b/drivers/net/ixp2000/ixp2400_tx.ucode
@@ -0,0 +1,98 @@
+static struct ixp2000_uengine_code ixp2400_tx =
+{
+ .cpu_model_bitmask = 0x000003fe,
+ .cpu_min_revision = 0,
+ .cpu_max_revision = 255,
+
+ .uengine_parameters = IXP2000_UENGINE_8_CONTEXTS |
+ IXP2000_UENGINE_PRN_UPDATE_EVERY |
+ IXP2000_UENGINE_NN_FROM_PREVIOUS |
+ IXP2000_UENGINE_ASSERT_EMPTY_AT_0 |
+ IXP2000_UENGINE_LM_ADDR1_PER_CONTEXT |
+ IXP2000_UENGINE_LM_ADDR0_PER_CONTEXT,
+
+ .initial_reg_values = (struct ixp2000_reg_value []) {
+ { -1, -1 }
+ },
+
+ .num_insns = 77,
+ .insns = (u8 []) {
+ 0xf0, 0x00, 0x00, 0x07, 0x00,
+ 0xd8, 0x03, 0x00, 0x00, 0x11,
+ 0x3c, 0x40, 0x00, 0x04, 0xe0,
+ 0x81, 0xf2, 0x02, 0x01, 0x00,
+ 0xd8, 0x00, 0x80, 0x01, 0x00,
+ 0xb0, 0x08, 0x06, 0x00, 0x00,
+ 0xf0, 0x00, 0x0c, 0x00, 0x80,
+ 0xb4, 0x49, 0x02, 0x03, 0x7f,
+ 0xf0, 0x00, 0x02, 0x83, 0x00,
+ 0xfc, 0x10, 0xac, 0x23, 0x08,
+ 0xfc, 0x10, 0xac, 0x43, 0x10,
+ 0xfc, 0x10, 0xac, 0x63, 0x18,
+ 0xe0, 0x00, 0x00, 0x00, 0x02,
+ 0xa0, 0x30, 0x02, 0x80, 0x00,
+ 0xd8, 0x06, 0x00, 0x01, 0x01,
+ 0x19, 0x40, 0x00, 0x04, 0x28,
+ 0xb0, 0x0a, 0x06, 0x00, 0x00,
+ 0xd8, 0x03, 0xc0, 0x01, 0x00,
+ 0x00, 0x44, 0x00, 0x80, 0x80,
+ 0xa0, 0x09, 0x06, 0x00, 0x00,
+ 0xb0, 0x0b, 0x06, 0x04, 0x00,
+ 0xd8, 0x13, 0x00, 0x01, 0x00,
+ 0xb0, 0x0c, 0x06, 0x08, 0x00,
+ 0xf0, 0x00, 0x0c, 0x00, 0xa0,
+ 0xfc, 0x10, 0xae, 0x23, 0x88,
+ 0xa0, 0x00, 0x12, 0x40, 0x00,
+ 0xb0, 0xc9, 0x02, 0x43, 0x01,
+ 0xb4, 0x49, 0x02, 0x43, 0x7f,
+ 0xb0, 0x00, 0x22, 0x80, 0x00,
+ 0xf0, 0x00, 0x02, 0x83, 0x00,
+ 0xf0, 0x00, 0x0c, 0x04, 0x02,
+ 0xb0, 0x40, 0x6c, 0x00, 0xa0,
+ 0xd8, 0x08, 0x80, 0x01, 0x01,
+ 0xaa, 0x00, 0x2c, 0x08, 0x02,
+ 0xa0, 0xc0, 0x30, 0x18, 0x90,
+ 0xa0, 0x00, 0x43, 0x00, 0x00,
+ 0xba, 0xc0, 0x32, 0xc0, 0xa0,
+ 0xaa, 0xb0, 0x00, 0x0f, 0x40,
+ 0xd8, 0x0a, 0x80, 0x01, 0x04,
+ 0xb0, 0x0a, 0x00, 0x08, 0x00,
+ 0xf0, 0x00, 0x00, 0x0f, 0x40,
+ 0xa4, 0x00, 0x2c, 0x08, 0x02,
+ 0xa0, 0x8a, 0x00, 0x0c, 0xa0,
+ 0xe0, 0x00, 0x00, 0x00, 0x04,
+ 0xd8, 0x0c, 0x80, 0x00, 0x18,
+ 0x3c, 0x40, 0x00, 0x04, 0xe0,
+ 0xba, 0x80, 0x42, 0x01, 0x80,
+ 0xb4, 0x40, 0x40, 0x13, 0xff,
+ 0xaa, 0x88, 0x00, 0x10, 0x80,
+ 0xb0, 0x08, 0x06, 0x00, 0x00,
+ 0xaa, 0xf0, 0x0d, 0x80, 0x80,
+ 0xd8, 0x0b, 0x40, 0x01, 0x05,
+ 0xa0, 0x88, 0x0c, 0x04, 0x80,
+ 0xfc, 0x10, 0xae, 0x43, 0x90,
+ 0xba, 0xc0, 0x50, 0x0f, 0x01,
+ 0x9a, 0x30, 0x50, 0x15, 0x30,
+ 0x9a, 0xb0, 0x50, 0x16, 0x30,
+ 0x9b, 0x50, 0x58, 0x16, 0x01,
+ 0x8a, 0xe2, 0x08, 0x16, 0x21,
+ 0x6b, 0x4e, 0x00, 0x83, 0x03,
+ 0xe0, 0x00, 0x00, 0x00, 0x30,
+ 0x9a, 0x80, 0x70, 0x0e, 0x04,
+ 0x8b, 0x88, 0x08, 0x1e, 0x02,
+ 0xf0, 0x00, 0x0c, 0x01, 0x81,
+ 0xf0, 0x01, 0x80, 0x1f, 0x00,
+ 0x9b, 0xd0, 0x78, 0x1e, 0x01,
+ 0x3d, 0x42, 0x00, 0x1c, 0x20,
+ 0xe0, 0x00, 0x00, 0x00, 0x08,
+ 0xfc, 0x10, 0xae, 0x63, 0x98,
+ 0xa4, 0x30, 0x0c, 0x04, 0x02,
+ 0xd8, 0x03, 0x00, 0x01, 0x00,
+ 0xd8, 0x11, 0xc1, 0x42, 0x14,
+ 0xa0, 0x18, 0x00, 0x08, 0x00,
+ 0x1a, 0x40, 0x00, 0x04, 0x2c,
+ 0x33, 0x00, 0x01, 0x2f, 0x20,
+ 0xd8, 0x03, 0x00, 0x00, 0x18,
+ 0xe0, 0x00, 0x02, 0x00, 0x00,
+ }
+};
diff --git a/drivers/net/ixp2000/ixpdev.c b/drivers/net/ixp2000/ixpdev.c
new file mode 100644
index 0000000..216aad1
--- /dev/null
+++ b/drivers/net/ixp2000/ixpdev.c
@@ -0,0 +1,404 @@
+/*
+ * IXP2000 MSF network device driver
+ * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
+ * Dedicated to Marija Kulikova.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/init.h>
+#include <linux/moduleparam.h>
+#include <asm/arch/uengine.h>
+#include <asm/mach-types.h>
+#include <asm/io.h>
+#include "ixp2400_rx.ucode"
+#include "ixp2400_tx.ucode"
+#include "ixpdev_priv.h"
+#include "ixpdev.h"
+
+static int nds_count;
+static struct net_device **nds;
+static int nds_open;
+static void (*set_port_admin_status)(int port, int up);
+
+static struct ixpdev_rx_desc * const rx_desc =
+ (struct ixpdev_rx_desc *)(IXP2000_SRAM0_VIRT_BASE + RX_BUF_DESC_BASE);
+static struct ixpdev_tx_desc * const tx_desc =
+ (struct ixpdev_tx_desc *)(IXP2000_SRAM0_VIRT_BASE + TX_BUF_DESC_BASE);
+static int tx_pointer;
+
+
+static int ixpdev_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct ixpdev_priv *ip = netdev_priv(dev);
+ struct ixpdev_tx_desc *desc;
+ int entry;
+
+ if (unlikely(skb->len > PAGE_SIZE)) {
+ /* @@@ Count drops. */
+ dev_kfree_skb(skb);
+ return 0;
+ }
+
+ entry = tx_pointer;
+ tx_pointer = (tx_pointer + 1) % TX_BUF_COUNT;
+
+ desc = tx_desc + entry;
+ desc->pkt_length = skb->len;
+ desc->channel = ip->channel;
+
+ skb_copy_and_csum_dev(skb, phys_to_virt(desc->buf_addr));
+ dev_kfree_skb(skb);
+
+ ixp2000_reg_write(RING_TX_PENDING,
+ TX_BUF_DESC_BASE + (entry * sizeof(struct ixpdev_tx_desc)));
+
+ dev->trans_start = jiffies;
+
+ local_irq_disable();
+ ip->tx_queue_entries++;
+ if (ip->tx_queue_entries == TX_BUF_COUNT_PER_CHAN)
+ netif_stop_queue(dev);
+ local_irq_enable();
+
+ return 0;
+}
+
+
+static int ixpdev_rx(struct net_device *dev, int *budget)
+{
+ while (*budget > 0) {
+ struct ixpdev_rx_desc *desc;
+ struct sk_buff *skb;
+ void *buf;
+ u32 _desc;
+
+ _desc = ixp2000_reg_read(RING_RX_DONE);
+ if (_desc == 0)
+ return 0;
+
+ desc = rx_desc +
+ ((_desc - RX_BUF_DESC_BASE) / sizeof(struct ixpdev_rx_desc));
+ buf = phys_to_virt(desc->buf_addr);
+
+ if (desc->pkt_length < 4 || desc->pkt_length > PAGE_SIZE) {
+ printk(KERN_ERR "ixp2000: rx err, length %d\n",
+ desc->pkt_length);
+ goto err;
+ }
+
+ if (desc->channel < 0 || desc->channel >= nds_count) {
+ printk(KERN_ERR "ixp2000: rx err, channel %d\n",
+ desc->channel);
+ goto err;
+ }
+
+ /* @@@ Make FCS stripping configurable. */
+ desc->pkt_length -= 4;
+
+ if (unlikely(!netif_running(nds[desc->channel])))
+ goto err;
+
+ skb = dev_alloc_skb(desc->pkt_length + 2);
+ if (likely(skb != NULL)) {
+ skb->dev = nds[desc->channel];
+ skb_reserve(skb, 2);
+ eth_copy_and_sum(skb, buf, desc->pkt_length, 0);
+ skb_put(skb, desc->pkt_length);
+ skb->protocol = eth_type_trans(skb, skb->dev);
+
+ skb->dev->last_rx = jiffies;
+
+ netif_receive_skb(skb);
+ }
+
+err:
+ ixp2000_reg_write(RING_RX_PENDING, _desc);
+ dev->quota--;
+ (*budget)--;
+ }
+
+ return 1;
+}
+
+/* dev always points to nds[0]. */
+static int ixpdev_poll(struct net_device *dev, int *budget)
+{
+ /* @@@ Have to stop polling when nds[0] is administratively
+ * downed while we are polling. */
+ do {
+ ixp2000_reg_write(IXP2000_IRQ_THD_RAW_STATUS_A_0, 0x00ff);
+
+ if (ixpdev_rx(dev, budget))
+ return 1;
+ } while (ixp2000_reg_read(IXP2000_IRQ_THD_RAW_STATUS_A_0) & 0x00ff);
+
+ netif_rx_complete(dev);
+ ixp2000_reg_write(IXP2000_IRQ_THD_ENABLE_SET_A_0, 0x00ff);
+
+ return 0;
+}
+
+/* @@@ Ugly hack. */
+static inline int netif_rx_schedule_prep_notup(struct net_device *dev)
+{
+ return !test_and_set_bit(__LINK_STATE_RX_SCHED, &dev->state);
+}
+
+static void ixpdev_tx_complete(void)
+{
+ int channel;
+ u32 wake;
+
+ wake = 0;
+ while (1) {
+ struct ixpdev_priv *ip;
+ u32 desc;
+ int entry;
+
+ desc = ixp2000_reg_read(RING_TX_DONE);
+ if (desc == 0)
+ break;
+
+ /* @@@ Check whether entries come back in order. */
+ entry = (desc - TX_BUF_DESC_BASE) / sizeof(struct ixpdev_tx_desc);
+ channel = tx_desc[entry].channel;
+
+ if (channel < 0 || channel >= nds_count) {
+ printk(KERN_ERR "ixp2000: txcomp channel index "
+ "out of bounds (%d, %.8i, %d)\n",
+ channel, (unsigned int)desc, entry);
+ continue;
+ }
+
+ ip = netdev_priv(nds[channel]);
+ if (ip->tx_queue_entries == TX_BUF_COUNT_PER_CHAN)
+ wake |= 1 << channel;
+ ip->tx_queue_entries--;
+ }
+
+ for (channel = 0; wake != 0; channel++) {
+ if (wake & (1 << channel)) {
+ netif_wake_queue(nds[channel]);
+ wake &= ~(1 << channel);
+ }
+ }
+}
+
+static irqreturn_t ixpdev_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ u32 status;
+
+ status = ixp2000_reg_read(IXP2000_IRQ_THD_STATUS_A_0);
+ if (status == 0)
+ return IRQ_NONE;
+
+ /*
+ * Any of the eight receive units signaled RX?
+ */
+ if (status & 0x00ff) {
+ ixp2000_reg_wrb(IXP2000_IRQ_THD_ENABLE_CLEAR_A_0, 0x00ff);
+ if (likely(netif_rx_schedule_prep_notup(nds[0]))) {
+ __netif_rx_schedule(nds[0]);
+ } else {
+ printk(KERN_CRIT "ixp2000: irq while polling!!\n");
+ }
+ }
+
+ /*
+ * Any of the eight transmit units signaled TXdone?
+ */
+ if (status & 0xff00) {
+ ixp2000_reg_wrb(IXP2000_IRQ_THD_RAW_STATUS_A_0, 0xff00);
+ ixpdev_tx_complete();
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int ixpdev_open(struct net_device *dev)
+{
+ struct ixpdev_priv *ip = netdev_priv(dev);
+ int err;
+
+ if (!nds_open++) {
+ err = request_irq(IRQ_IXP2000_THDA0, ixpdev_interrupt,
+ SA_SHIRQ, "ixp2000_eth", nds);
+ if (err) {
+ nds_open--;
+ return err;
+ }
+
+ ixp2000_reg_write(IXP2000_IRQ_THD_ENABLE_SET_A_0, 0xffff);
+ }
+
+ set_port_admin_status(ip->channel, 1);
+ netif_start_queue(dev);
+
+ return 0;
+}
+
+static int ixpdev_close(struct net_device *dev)
+{
+ struct ixpdev_priv *ip = netdev_priv(dev);
+
+ netif_stop_queue(dev);
+ set_port_admin_status(ip->channel, 0);
+
+ if (!--nds_open) {
+ ixp2000_reg_write(IXP2000_IRQ_THD_ENABLE_CLEAR_A_0, 0xffff);
+ free_irq(IRQ_IXP2000_THDA0, nds);
+ }
+
+ return 0;
+}
+
+struct net_device *ixpdev_alloc(int channel, int sizeof_priv)
+{
+ struct net_device *dev;
+ struct ixpdev_priv *ip;
+
+ dev = alloc_etherdev(sizeof_priv);
+ if (dev == NULL)
+ return NULL;
+
+ dev->hard_start_xmit = ixpdev_xmit;
+ dev->poll = ixpdev_poll;
+ dev->open = ixpdev_open;
+ dev->stop = ixpdev_close;
+
+ dev->features |= NETIF_F_SG | NETIF_F_HW_CSUM;
+ dev->weight = 64;
+
+ ip = netdev_priv(dev);
+ ip->channel = channel;
+ ip->tx_queue_entries = 0;
+
+ return dev;
+}
+
+int ixpdev_init(int __nds_count, struct net_device **__nds,
+ void (*__set_port_admin_status)(int port, int up))
+{
+ int i;
+ int err;
+
+ if (RX_BUF_COUNT > 192 || TX_BUF_COUNT > 192) {
+ static void __too_many_rx_or_tx_buffers(void);
+ __too_many_rx_or_tx_buffers();
+ }
+
+ nds_count = __nds_count;
+ nds = __nds;
+ set_port_admin_status = __set_port_admin_status;
+
+ for (i = 0; i < nds_count; i++) {
+ err = register_netdev(nds[i]);
+ if (err) {
+ while (--i >= 0)
+ unregister_netdev(nds[i]);
+ goto err_out;
+ }
+ }
+
+ for (i = 0; i < RX_BUF_COUNT; i++) {
+ void *buf;
+
+ buf = (void *)get_zeroed_page(GFP_KERNEL);
+ if (buf == NULL) {
+ err = -ENOMEM;
+ while (--i >= 0)
+ free_page((unsigned long)phys_to_virt(rx_desc[i].buf_addr));
+ goto err_unregister;
+ }
+ rx_desc[i].buf_addr = virt_to_phys(buf);
+ rx_desc[i].buf_length = PAGE_SIZE;
+ }
+
+ /* @@@ Maybe we shouldn't be preallocating TX buffers. */
+ for (i = 0; i < TX_BUF_COUNT; i++) {
+ void *buf;
+
+ buf = (void *)get_zeroed_page(GFP_KERNEL);
+ if (buf == NULL) {
+ err = -ENOMEM;
+ while (--i >= 0)
+ free_page((unsigned long)phys_to_virt(tx_desc[i].buf_addr));
+ goto err_free_rx;
+ }
+ tx_desc[i].buf_addr = virt_to_phys(buf);
+ }
+
+ /* 256 entries, ring status set means 'empty', base address 0x0000. */
+ ixp2000_reg_write(RING_RX_PENDING_BASE, 0x44000000);
+ ixp2000_reg_write(RING_RX_PENDING_HEAD, 0x00000000);
+ ixp2000_reg_write(RING_RX_PENDING_TAIL, 0x00000000);
+
+ /* 256 entries, ring status set means 'full', base address 0x0400. */
+ ixp2000_reg_write(RING_RX_DONE_BASE, 0x40000400);
+ ixp2000_reg_write(RING_RX_DONE_HEAD, 0x00000000);
+ ixp2000_reg_write(RING_RX_DONE_TAIL, 0x00000000);
+
+ for (i = 0; i < RX_BUF_COUNT; i++) {
+ ixp2000_reg_write(RING_RX_PENDING,
+ RX_BUF_DESC_BASE + (i * sizeof(struct ixpdev_rx_desc)));
+ }
+
+ ixp2000_uengine_load(0, &ixp2400_rx);
+ ixp2000_uengine_start_contexts(0, 0xff);
+
+
+ /* 256 entries, ring status set means 'empty', base address 0x0800. */
+ ixp2000_reg_write(RING_TX_PENDING_BASE, 0x44000800);
+ ixp2000_reg_write(RING_TX_PENDING_HEAD, 0x00000000);
+ ixp2000_reg_write(RING_TX_PENDING_TAIL, 0x00000000);
+
+ /* 256 entries, ring status set means 'full', base address 0x0c00. */
+ ixp2000_reg_write(RING_TX_DONE_BASE, 0x40000c00);
+ ixp2000_reg_write(RING_TX_DONE_HEAD, 0x00000000);
+ ixp2000_reg_write(RING_TX_DONE_TAIL, 0x00000000);
+
+ ixp2000_uengine_load(1, &ixp2400_tx);
+ ixp2000_uengine_start_contexts(1, 0xff);
+
+ return 0;
+
+err_free_rx:
+ for (i = 0; i < RX_BUF_COUNT; i++)
+ free_page((unsigned long)phys_to_virt(rx_desc[i].buf_addr));
+
+err_unregister:
+ for (i = 0; i < nds_count; i++)
+ unregister_netdev(nds[i]);
+
+err_out:
+ return err;
+}
+
+void ixpdev_deinit(void)
+{
+ int i;
+
+ /* @@@ Flush out pending packets. */
+
+ ixp2000_uengine_stop_contexts(1, 0xff);
+ ixp2000_uengine_stop_contexts(0, 0xff);
+ ixp2000_uengine_reset(0x3);
+
+ for (i = 0; i < TX_BUF_COUNT; i++)
+ free_page((unsigned long)phys_to_virt(tx_desc[i].buf_addr));
+
+ for (i = 0; i < RX_BUF_COUNT; i++)
+ free_page((unsigned long)phys_to_virt(rx_desc[i].buf_addr));
+
+ for (i = 0; i < nds_count; i++)
+ unregister_netdev(nds[i]);
+}
diff --git a/drivers/net/ixp2000/ixpdev.h b/drivers/net/ixp2000/ixpdev.h
new file mode 100644
index 0000000..bd686cb
--- /dev/null
+++ b/drivers/net/ixp2000/ixpdev.h
@@ -0,0 +1,27 @@
+/*
+ * IXP2000 MSF network device driver
+ * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
+ * Dedicated to Marija Kulikova.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __IXPDEV_H
+#define __IXPDEV_H
+
+struct ixpdev_priv
+{
+ int channel;
+ int tx_queue_entries;
+};
+
+struct net_device *ixpdev_alloc(int channel, int sizeof_priv);
+int ixpdev_init(int num_ports, struct net_device **nds,
+ void (*set_port_admin_status)(int port, int up));
+void ixpdev_deinit(void);
+
+
+#endif
diff --git a/drivers/net/ixp2000/ixpdev_priv.h b/drivers/net/ixp2000/ixpdev_priv.h
new file mode 100644
index 0000000..86aa08e
--- /dev/null
+++ b/drivers/net/ixp2000/ixpdev_priv.h
@@ -0,0 +1,57 @@
+/*
+ * IXP2000 MSF network device driver
+ * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
+ * Dedicated to Marija Kulikova.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __IXPDEV_PRIV_H
+#define __IXPDEV_PRIV_H
+
+#define RX_BUF_DESC_BASE 0x00001000
+#define RX_BUF_COUNT ((3 * PAGE_SIZE) / (4 * sizeof(struct ixpdev_rx_desc)))
+#define TX_BUF_DESC_BASE 0x00002000
+#define TX_BUF_COUNT ((3 * PAGE_SIZE) / (4 * sizeof(struct ixpdev_tx_desc)))
+#define TX_BUF_COUNT_PER_CHAN (TX_BUF_COUNT / 4)
+
+#define RING_RX_PENDING ((u32 *)IXP2000_SCRATCH_RING_VIRT_BASE)
+#define RING_RX_DONE ((u32 *)(IXP2000_SCRATCH_RING_VIRT_BASE + 4))
+#define RING_TX_PENDING ((u32 *)(IXP2000_SCRATCH_RING_VIRT_BASE + 8))
+#define RING_TX_DONE ((u32 *)(IXP2000_SCRATCH_RING_VIRT_BASE + 12))
+
+#define SCRATCH_REG(x) ((u32 *)(IXP2000_GLOBAL_REG_VIRT_BASE | 0x0800 | (x)))
+#define RING_RX_PENDING_BASE SCRATCH_REG(0x00)
+#define RING_RX_PENDING_HEAD SCRATCH_REG(0x04)
+#define RING_RX_PENDING_TAIL SCRATCH_REG(0x08)
+#define RING_RX_DONE_BASE SCRATCH_REG(0x10)
+#define RING_RX_DONE_HEAD SCRATCH_REG(0x14)
+#define RING_RX_DONE_TAIL SCRATCH_REG(0x18)
+#define RING_TX_PENDING_BASE SCRATCH_REG(0x20)
+#define RING_TX_PENDING_HEAD SCRATCH_REG(0x24)
+#define RING_TX_PENDING_TAIL SCRATCH_REG(0x28)
+#define RING_TX_DONE_BASE SCRATCH_REG(0x30)
+#define RING_TX_DONE_HEAD SCRATCH_REG(0x34)
+#define RING_TX_DONE_TAIL SCRATCH_REG(0x38)
+
+struct ixpdev_rx_desc
+{
+ u32 buf_addr;
+ u32 buf_length;
+ u32 channel;
+ u32 pkt_length;
+};
+
+struct ixpdev_tx_desc
+{
+ u32 buf_addr;
+ u32 pkt_length;
+ u32 channel;
+ u32 unused;
+};
+
+
+#endif
diff --git a/drivers/net/ixp2000/pm3386.c b/drivers/net/ixp2000/pm3386.c
new file mode 100644
index 0000000..cf0681f
--- /dev/null
+++ b/drivers/net/ixp2000/pm3386.c
@@ -0,0 +1,304 @@
+/*
+ * Helper functions for the PM3386s on the Radisys ENP2611
+ * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
+ * Dedicated to Marija Kulikova.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <asm/io.h>
+
+/*
+ * Read from register 'reg' of PM3386 device 'pm'.
+ */
+static u16 pm3386_reg_read(int pm, int reg)
+{
+ void *_reg;
+ u16 value;
+
+ _reg = (void *)ENP2611_PM3386_0_VIRT_BASE;
+ if (pm == 1)
+ _reg = (void *)ENP2611_PM3386_1_VIRT_BASE;
+
+ value = *((volatile u16 *)(_reg + (reg << 1)));
+
+// printk(KERN_INFO "pm3386_reg_read(%d, %.3x) = %.8x\n", pm, reg, value);
+
+ return value;
+}
+
+/*
+ * Write to register 'reg' of PM3386 device 'pm', and perform
+ * a readback from the identification register.
+ */
+static void pm3386_reg_write(int pm, int reg, u16 value)
+{
+ void *_reg;
+ u16 dummy;
+
+// printk(KERN_INFO "pm3386_reg_write(%d, %.3x, %.8x)\n", pm, reg, value);
+
+ _reg = (void *)ENP2611_PM3386_0_VIRT_BASE;
+ if (pm == 1)
+ _reg = (void *)ENP2611_PM3386_1_VIRT_BASE;
+
+ *((volatile u16 *)(_reg + (reg << 1))) = value;
+
+ dummy = *((volatile u16 *)_reg);
+ __asm__ __volatile__("mov %0, %0" : "+r" (dummy));
+}
+
+/*
+ * Read from port 'port' register 'reg', where the registers
+ * for the different ports are 'spacing' registers apart.
+ */
+static u16 pm3386_port_reg_read(int port, int _reg, int spacing)
+{
+ int reg;
+
+ reg = _reg;
+ if (port & 1)
+ reg += spacing;
+
+ return pm3386_reg_read(port >> 1, reg);
+}
+
+/*
+ * Write to port 'port' register 'reg', where the registers
+ * for the different ports are 'spacing' registers apart.
+ */
+static void pm3386_port_reg_write(int port, int _reg, int spacing, u16 value)
+{
+ int reg;
+
+ reg = _reg;
+ if (port & 1)
+ reg += spacing;
+
+ pm3386_reg_write(port >> 1, reg, value);
+}
+
+
+void pm3386_reset(void)
+{
+ /* @@@ Implement me. */
+}
+
+static u16 swaph(u16 x)
+{
+ return ((x << 8) | (x >> 8)) & 0xffff;
+}
+
+void pm3386_init_port(int port)
+{
+ int pm = port >> 1;
+
+ /*
+ * Work around ENP2611 bootloader programming MAC address
+ * in reverse.
+ */
+ if (pm3386_port_reg_read(port, 0x30a, 0x100) == 0x0000 &&
+ (pm3386_port_reg_read(port, 0x309, 0x100) & 0xff00) == 0x5000) {
+ u16 temp[3];
+
+ temp[0] = pm3386_port_reg_read(port, 0x308, 0x100);
+ temp[1] = pm3386_port_reg_read(port, 0x309, 0x100);
+ temp[2] = pm3386_port_reg_read(port, 0x30a, 0x100);
+ pm3386_port_reg_write(port, 0x308, 0x100, swaph(temp[2]));
+ pm3386_port_reg_write(port, 0x309, 0x100, swaph(temp[1]));
+ pm3386_port_reg_write(port, 0x30a, 0x100, swaph(temp[0]));
+ }
+
+ /*
+ * Initialise narrowbanding mode. See application note 2010486
+ * for more information. (@@@ We also need to issue a reset
+ * when ROOL or DOOL are detected.)
+ */
+ pm3386_port_reg_write(port, 0x708, 0x10, 0xd055);
+ udelay(500);
+ pm3386_port_reg_write(port, 0x708, 0x10, 0x5055);
+
+ /*
+ * SPI-3 ingress block. Set 64 bytes SPI-3 burst size
+ * towards SPI-3 bridge.
+ */
+ pm3386_port_reg_write(port, 0x122, 0x20, 0x0002);
+
+ /*
+ * Enable ingress protocol checking, and soft reset the
+ * SPI-3 ingress block.
+ */
+ pm3386_reg_write(pm, 0x103, 0x0003);
+ while (!(pm3386_reg_read(pm, 0x103) & 0x80))
+ ;
+
+ /*
+ * SPI-3 egress block. Gather 12288 bytes of the current
+ * packet in the TX fifo before initiating transmit on the
+ * SERDES interface. (Prevents TX underflows.)
+ */
+ pm3386_port_reg_write(port, 0x221, 0x20, 0x0007);
+
+ /*
+ * Enforce odd parity from the SPI-3 bridge, and soft reset
+ * the SPI-3 egress block.
+ */
+ pm3386_reg_write(pm, 0x203, 0x000d & ~(4 << (port & 1)));
+ while ((pm3386_reg_read(pm, 0x203) & 0x000c) != 0x000c)
+ ;
+
+ /*
+ * EGMAC block. Set this channels to reject long preambles,
+ * not send or transmit PAUSE frames, enable preamble checking,
+ * disable frame length checking, enable FCS appending, enable
+ * TX frame padding.
+ */
+ pm3386_port_reg_write(port, 0x302, 0x100, 0x0113);
+
+ /*
+ * Soft reset the EGMAC block.
+ */
+ pm3386_port_reg_write(port, 0x301, 0x100, 0x8000);
+ udelay(10);
+ pm3386_port_reg_write(port, 0x301, 0x100, 0x0000);
+ udelay(10);
+
+ /*
+ * Auto-sense autonegotiation status.
+ */
+ pm3386_port_reg_write(port, 0x306, 0x100, 0x0100);
+
+ /*
+ * Allow reception of jumbo frames.
+ */
+ pm3386_port_reg_write(port, 0x310, 0x100, 9018);
+
+ /*
+ * Allow transmission of jumbo frames.
+ */
+ pm3386_port_reg_write(port, 0x336, 0x100, 9018);
+
+ /* @@@ Should set 0x337/0x437 (RX forwarding threshold.) */
+
+ /*
+ * Set autonegotiation parameters to 'no PAUSE, full duplex.'
+ */
+ pm3386_port_reg_write(port, 0x31c, 0x100, 0x0020);
+ udelay(10);
+
+ /*
+ * Enable and restart autonegotiation.
+ */
+ pm3386_port_reg_write(port, 0x318, 0x100, 0x0003);
+ udelay(1000);
+ pm3386_port_reg_write(port, 0x318, 0x100, 0x0002);
+ udelay(10);
+}
+
+void pm3386_get_mac(int port, u8 *mac)
+{
+ u16 temp;
+
+ temp = pm3386_port_reg_read(port, 0x308, 0x100);
+ mac[0] = temp & 0xff;
+ mac[1] = (temp >> 8) & 0xff;
+
+ temp = pm3386_port_reg_read(port, 0x309, 0x100);
+ mac[2] = temp & 0xff;
+ mac[3] = (temp >> 8) & 0xff;
+
+ temp = pm3386_port_reg_read(port, 0x30a, 0x100);
+ mac[4] = temp & 0xff;
+ mac[5] = (temp >> 8) & 0xff;
+}
+
+static u32 pm3386_get_stat(int port, u16 base)
+{
+ u32 value;
+
+ value = pm3386_port_reg_read(port, base, 0x100);
+ value |= pm3386_port_reg_read(port, base + 1, 0x100) << 16;
+
+ return value;
+}
+
+void pm3386_get_stats(int port, struct net_device_stats *stats)
+{
+ /*
+ * Snapshot statistics counters.
+ */
+ pm3386_port_reg_write(port, 0x500, 0x100, 0x0001);
+ while (pm3386_port_reg_read(port, 0x500, 0x100) & 0x0001)
+ ;
+
+ memset(stats, 0, sizeof(stats));
+
+ stats->rx_packets = pm3386_get_stat(port, 0x510);
+ stats->tx_packets = pm3386_get_stat(port, 0x590);
+ stats->rx_bytes = pm3386_get_stat(port, 0x514);
+ stats->tx_bytes = pm3386_get_stat(port, 0x594);
+ /* @@@ Add other stats. */
+}
+
+int pm3386_is_link_up(int port)
+{
+ u16 temp;
+
+ temp = pm3386_port_reg_read(port, 0x31a, 0x100);
+ temp = pm3386_port_reg_read(port, 0x31a, 0x100);
+
+ return !!(temp & 0x0002);
+}
+
+void pm3386_enable_rx(int port)
+{
+ u16 temp;
+
+ temp = pm3386_port_reg_read(port, 0x303, 0x100);
+ temp |= 0x1000;
+ pm3386_port_reg_write(port, 0x303, 0x100, temp);
+
+ udelay(10);
+}
+
+void pm3386_disable_rx(int port)
+{
+ u16 temp;
+
+ temp = pm3386_port_reg_read(port, 0x303, 0x100);
+ temp &= 0xefff;
+ pm3386_port_reg_write(port, 0x303, 0x100, temp);
+
+ udelay(10);
+}
+
+void pm3386_enable_tx(int port)
+{
+ u16 temp;
+
+ temp = pm3386_port_reg_read(port, 0x303, 0x100);
+ temp |= 0x4000;
+ pm3386_port_reg_write(port, 0x303, 0x100, temp);
+
+ udelay(10);
+}
+
+void pm3386_disable_tx(int port)
+{
+ u16 temp;
+
+ temp = pm3386_port_reg_read(port, 0x303, 0x100);
+ temp &= 0xbfff;
+ pm3386_port_reg_write(port, 0x303, 0x100, temp);
+
+ udelay(10);
+}
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/ixp2000/pm3386.h b/drivers/net/ixp2000/pm3386.h
new file mode 100644
index 0000000..55ecb18
--- /dev/null
+++ b/drivers/net/ixp2000/pm3386.h
@@ -0,0 +1,26 @@
+/*
+ * Helper functions for the PM3386s on the Radisys ENP2611
+ * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
+ * Dedicated to Marija Kulikova.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __PM3386_H
+#define __PM3386_H
+
+void pm3386_reset(void);
+void pm3386_init_port(int port);
+void pm3386_get_mac(int port, u8 *mac);
+void pm3386_get_stats(int port, struct net_device_stats *stats);
+int pm3386_is_link_up(int port);
+void pm3386_enable_rx(int port);
+void pm3386_disable_rx(int port);
+void pm3386_enable_tx(int port);
+void pm3386_disable_tx(int port);
+
+
+#endif
OpenPOWER on IntegriCloud